Panasonic hc-v800, HC-VX1 Operation Manual

Please read these instructions carefully before using this product, and save this manual for future use.

Register online at http://shop.panasonic.com/support (U.S. customers only)

DVQP1576ZA

F0318SQ0

Read this first

∫ About the recording format for recording motion pictures

(For the WXF1 / VXF1 / VX1 )

You can select from AVCHD*1, 4K MP4*2, MP4*2 or 24p*2 recording formats to record motion pictures using this unit. (l 101)

(For the V800 )

You can select from AVCHD*1, MP4*2 or 24p*2 recording formats to record motion pictures using this unit.

*1 It is compatible with the AVCHD Progressive (1080/60p).

*2 It is not compatible with motion pictures recorded in AVCHD format.

AVCHD:

It is suitable for viewing on a high-definition TV or for saving to disc*3.

*3 Images recorded in 1080/60p can be saved using the following methods: jCopying to a disc using the HD Writer AE 5.4.

jCopying to a Panasonic Blu-ray disc recorder that supports AVCHD Progressive. ≥ Blu-ray recorders are not sold in US.

4K MP4 (For the WXF1 / VXF1 / VX1 ):

This is a recording format suitable for editing images.

This format can record 4K motion pictures (3840k2160/30p), which deliver a resolution four times higher than that of full high-definition motion pictures.

MP4:

This is a recording format suitable for playing back or editing on a PC.

24p:

This allows you to record images similar to those shot on a roll of cinema film. (For the WXF1 / VXF1 / VX1 )

Images can be recorded as 4K motion pictures (3840k2160/24p) or in high-definition picture quality (1920k1080/24p).

(For the V800 )

Images can be recorded as high-definition picture quality (1920k1080/24p).

∫ Indemnity about recorded content

Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content, and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit.

- 2 -

∫ About Condensation

(When the lens, the viewfinder* or LCD Monitor is fogged up)

Condensation occurs when there is a change in temperature or humidity, such as when the unit is taken from outside or a cold room to a warm room. Please be careful, as it may cause the lens, the viewfinder or LCD monitor to become soiled, moldy, or damaged.

When taking the unit to a place which has a different temperature, if the unit is accustomed to the room temperature of the destination for about one hour, condensation can be prevented. (When the difference in temperature is severe, place the unit in a plastic bag or the like, remove air from the bag, and seal the bag.)

When condensation has occurred, remove the battery and/or the AC adapter and leave the unit like that for about one hour. When the unit becomes accustomed to the surrounding temperature, fogginess will disappear naturally.

* For the WXF1 / VXF1

∫ Cards that you can use with this unit

SD Memory Card, SDHC Memory Card and SDXC Memory Card

≥4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory Cards that do not have the SDXC logo are not based on SD Memory Card Specifications.

≥Refer to page 17 for more details on SD cards.

∫ Caution regarding the lens and the viewfinder*

Do not aim the lens or the viewfinder at the sun or strong light. Doing so may cause the unit to malfunction.

* For the WXF1 / VXF1

- 3 -

∫ For the purposes of this owner’s manual

≥ SD Memory Card, SDHC Memory Card and SDXC Memory Card are referred to as the “SD card”. ≥ The smartphone and tablet are indicated as “smartphone”.

≥ Function that can be used for Motion Picture Recording Mode: Function that can be used for Still Picture Recording Mode:

≥Function that can be used for the Playback Mode:

Function that can be used for the Playback Mode (motion pictures only): Function that can be used for the Playback Mode (still pictures only):

≥Scene(s) recorded in the recording format [AVCHD]: “AVCHD scene(s)”

≥(For the WXF1 / VXF1 / VX1 )

Scene(s) recorded in the recording format [4K MP4] and scene(s) recorded in 4K Photo mode: “4K MP4 scene(s)”

≥Scene(s) recorded in the recording format [MP4], scene(s) saved in MP4 (1920k1080/30p), MP4 (1280k720/30p) or MP4 (640k360/30p): “MP4 scene(s)”

≥Scene(s) recorded in the recording format [24p]: “24p scene(s)”

≥Scene(s) containing only the Main Camera’s image that was recorded separately from a simultaneously recorded normal scene when [Backup for Twin Camera] was set to [ON]: “Scene(s) recorded as Backup for Twin Camera”

≥(For the WXF1 / VXF1 )

Fn buttons set as follows in [FN BUTTON SETTING]

jFn button set as [ (Wi-Fi)]: “Wi-Fi button”

jFn button set as [ (HDR Movie)]: “HDR button”

jFn button set as [ (PHOTOSHOT)]: “Photoshot button”

jFn button set as [ (REC MODE CHANGE)]: “Recording Mode selector button”

≥Pages for reference are indicated by an arrow, for example: l 00

≥Model numbers are abbreviated as follows in this owner’s manual:

This owner’s manual are designed for use with models WXF1 , VXF1 , VX1 and V800 . Pictures may be slightly different from the original.

≥The illustrations used in this owner’s manual show model VX1 , however, parts of the explanation refer to different models.

≥Depending on the model, some functions are not available.

≥Features may vary, so please read carefully.

≥Not all models may be available depending on the region of purchase.

- 4 -

- 5 -

- 6 -

- 7 -

Preparation

Names and Functions of Main Parts

1Lens (LEICA DICOMAR)

≥For information on how to attach the supplied lens hood, refer to page 31.

2 Lens cover

≥The lens cover opens in Motion Picture Recording Mode or Still Picture Recording Mode. (l 21)

3 Internal microphones

(For the WXF1 / VXF1 )

4 Infrared light (l 96)

5Manual ring (l 79)

6 Camera function button [CAMERA FUNCTION] (l 79)

7AUTO/MANUAL button [AUTO/MANUAL] (l 79)

10 11

8 9

8Grip belt (l 30)

9Wi-Fi Transmitter (l 175)

10 Headphone terminal [ ] (l 98)

≥ Excessive sound pressure from earphones and headphones can cause hearing loss. ≥ Listening at full volume for long periods may damage the user’s ears.

11 DC input terminal [DC IN] (l 13)

≥ Do not use any other AC adaptors except the supplied one.

- 8 -

12Recording/playback button [/ ] (l 21)

13(For the WXF1 / VXF1 )

Recording mode selector button [// ] (l 22)/Fn4 button (l 114)

14Power button [ ] (l 19)

15Battery release lever [BATT] (l 12)

16HDR button [] (l 53)/Fn2 button (l 114)*1

17Wi-Fi button [Wi-Fi] (l 176, 182, 185, 190, 192, 196, 210, 213, 222, 226)/ Fn1 button (l 114)*1

*1 When using WXF1 / VXF1 , this can be used as an Fn button. (l 114)

18USB terminal [] (l 163, 169, 249)

19Micro HDMI connector [HDMI] (l 157)

20

20(For the WXF1 / VXF1 )

MIC/LINE IN input terminal [MIC/LINE IN] (For the VX1 / V800 )

Microphone terminal [MIC]

≥A compatible plug-in powered microphone can be used as an external microphone.

≥When the unit is connected with the AC adaptor, sometimes noise may be heard depending on the microphone type. In this case, please switch to the battery for the power supply and the noise will stop.

≥ (For the WXF1 / VXF1 )

If you connect an external microphone or audio device*2 when a setting other than [AUTO] is selected for [AUDIO LEVEL] (l 110), (audio input level meter) will be displayed. Set

[AUDIO INPUT SELECT] before connecting. (l 106)

*2 The audio from the audio device is recorded when shooting. ≥ (For the VX1 / V800 )

If you connect an external microphone when a setting other than [AUTO] is selected for

- 9 -

22Battery holder (l 12)

23Speaker

24Shoulder strap fixture

25Recording start/stop button (l 32)

26Status indicator (l 19, 203)

WXF1 only

31

32

31Sub Camera (l 56)

32Sub Camera dial (l 56)

- 10 -

Preparation

Power supply

∫ About batteries that you can use with this unit

The battery that can be used with this unit is VW-VBT190/VW-VBT380.

≥The unit has a function for distinguishing batteries which can be used safely.

The dedicated battery (VW-VBT190/VW-VBT380) supports this function. The only batteries suitable for use with this unit are genuine Panasonic products and batteries manufactured by other companies and certified by Panasonic. Panasonic cannot in any way guarantee the quality, performance or safety of batteries which have been manufactured by other companies and are not genuine Panasonic products.

It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used.

Inserting/removing the battery

≥ Press the power button to turn off the unit. (l 19)

Install the battery by inserting it in the direction shown in the figure.

- 12 -

Charging and recording time

∫ Charging/Recording time

≥Temperature: 25 oC (77 oF)/humidity: 60%RH

≥When using the LCD monitor

≥The indicated charging time is for when the battery has been discharged completely. Charging time and recordable time vary depending on the usage conditions such as high/ low temperature.

≥Charging times in parentheses are when charging from the USB terminal.

For the WXF1 / VXF1

≥Maximum continuous recordable times and actual recordable times in round parentheses are the values when the viewfinder is used.

≥(For the WXF1 )

Maximum continuous recordable times and actual recordable times in square parentheses are the values when recording is performed with the Sub Camera in combination with the LCD monitor*.

* These include times when is displayed on the screen.

- 14 -

- 15 -

≥Do not place SD cards in the following areas: jIn direct sunlight

jIn very dusty or humid areas jNear a heater

jLocations susceptible to significant difference in temperature (condensation can occur.) jWhere static electricity or electromagnetic waves occur

≥To protect SD cards, return them to their cases when you are not using them.

≥About disposing of or giving away the SD card. (l 268)

Preparation

Turning the unit on/off

You can turn the unit on and off using the power button or by opening and closing the LCD monitor.

≥(For the WXF1 / VXF1 )

You can also turn the unit on and off using the viewfinder.

Turning the unit on and off with the power button

Open the LCD monitor and press the power button to turn on the unit.

To turn off the unit

AThe status indicator lights on.

- 19 -

VX1 / V800

Turning the unit on and off with the LCD monitor

The unit is turned on when the LCD monitor is opened, and unit is turned off when it is closed.

During normal use, opening and closing of the LCD monitor can be conveniently used to turn the unit on/off.

≥The unit will not turn off while recording motion pictures or connecting to Wi-Fi even if the LCD monitor is closed.

≥In the following cases, opening the LCD monitor does not turn on the unit. Press the power button to turn on the unit.

jWhen the unit is originally purchased

jWhen you have turned off the unit using the power button

WXF1 / VXF1

Turning the unit on and off with the LCD monitor/viewfinder

Opening the LCD monitor or extending the viewfinder turns on the unit. Closing the LCD monitor/ viewfinder turns off the unit.

During normal use, you may find it convenient to turn the unit on/off using the LCD monitor or viewfinder.

≥The unit will not turn off unless the LCD monitor is closed and the viewfinder is retracted.

≥The unit will not turn off while recording motion pictures or connecting to Wi-Fi even if the LCD monitor is closed and the viewfinder is retracted.

≥In the following cases, opening the LCD monitor or extending the viewfinder does not turn on the unit. Press the power button to turn on the unit.

jWhen the unit is originally purchased

jWhen you have turned off the unit using the power button

≥When the viewfinder is extended, opening the LCD monitor turns off the viewfinder and turns on the LCD monitor.

The viewfinder may turn on depending on the settings for the [LCD/EVF CHANGE] in the Fn button function. (l 24)

≥If you use the Fn button with [ (LCD/EVF CHANGE)] (l 24) set, the LCD monitor or viewfinder may not light, even if the unit is on.

Press the Fn button set with [ (LCD/EVF CHANGE)] (l 24) to turn the LCD monitor or viewfinder on.

∫Overheat detection

When the internal temperature of the unit rises during use, a message will be displayed. When this happens, the unit will turn off automatically a few minutes later.

≥ Wait until the temperature has dropped before resuming use.

If you try to use the Wi-Fi function while the internal temperature of this unit is high, a message will be displayed. When this happens, the Wi-Fi function is disabled.

≥ Wait until the temperature has dropped before resuming use.

- 20 -

Preparation

Selecting a mode

You can switch this unit between Recording Mode (Motion Picture Recording Mode/Still Picture Recording Mode) and Playback Mode by pressing the recording/playback button.

If you touch the recording mode switching icon in Recording Mode, this unit can be switched between Motion Picture Recording Mode and Still Picture Recording Mode.

≥(For the WXF1 / VXF1 )

In Recording Mode, pressing the recording mode selector button allows you to switch between Motion Picture Recording Mode, 4K Photo Mode and Still Picture Recording Mode. (l 22)

Switching this unit between Recording Mode and Playback Mode

Recording/playback button

Press the button to switch this unit between Recording Mode and Playback Mode.

≥ When you turn on this unit, it starts up in Recording Mode.

- 21 -

Switching this unit between Motion Picture Recording Mode and Still Picture Recording Mode

WXF1 / VXF1

Pressing a button to switch between Motion Picture Recording Mode and Still Picture Recording Mode

Recording mode selector button

Each time you press this button, the Recording Mode switches in the following order: Motion Picture Recording Mode # 4K Photo Mode* # Still Picture Recording Mode

* The unit does not switch to 4K Photo Mode in the following cases: jWhen the Wireless Twin Camera function is in use (l 219)

jWhen [REC FORMAT] is set to [24p] (l 101) jNight Mode (l 96)

≥ For information on 4K Photo Mode, refer to page 77.

≥ You can also change the [FN BUTTON SETTING] so you can use the desired Fn button as a Recording Mode selector button. (l 114)

MENU : [SETUP] # [FN BUTTON SETTING] # [Fn1] to [Fn4] # []

- 22 -

Touching an icon to switch between Motion Picture Recording Mode and Still Picture Recording Mode

Touch the recording mode switching icon displayed on the LCD monitor (touch screen) to switch this unit between Motion Picture Recording Mode and Still Picture Recording Mode.

(Motion Picture Recording Mode)

1 Press the recording/playback button to switch this unit to Recording Mode.

≥The recording mode switching icon A is displayed on the screen.

Motion Picture Recording Mode

Still Picture Recording Mode

2 Touch the recording mode switching icon.

≥ Refer to page 25 for touch screen operation.

To display the recording mode switching icon

Display of the recording mode switching icon will disappear when no touch operation is performed for a specific period of time. To display it again, touch the screen.

≥The recording mode selector button and the recording mode switching icon are disabled when the Wireless Multi-Camera function is enabled.

≥If the recording start/stop button is pressed in Still Picture Recording Mode or Playback Mode, this unit will be switched to Motion Picture Recording Mode. During motion picture/still picture playback or in other conditions, even if the recording start/stop button is pressed, the recording mode may not be switched.

≥When you switch between Motion Picture Recording Mode, 4K Photo Mode* and Still Picture Recording Mode, settings used in the original recording mode may not be maintained. (l 63)

* For the WXF1 / VXF1 / VX1

- 23 -

How to use the touch screen

You can operate by directly touching the LCD monitor (touch screen) with your finger.

∫ Touch

Touch and release the touch screen to select icon or picture. ≥ Touch the center of the icon.

≥ Touching the touch screen will not operate while you are touching another part of the touch screen.

∫ Slide while touching

Move your finger while pressing on the touch screen.

∫ About the operation icons

///:

Touch when changing a page or performing settings.

:

Touch to return to the previous screen.

≥(For the WXF1 / VXF1 )

When the viewfinder is in use, on-screen icons will be displayed but disabled. Open the LCD monitor to touch them.

Viewfinder adjustment [WXF1]/[VXF1]

∫ Diopter adjustment

Adjust to make the image clear by rotating the diopter adjustment dial.

≥ Extend the viewfinder and close the LCD monitor to turn on the viewfinder.

≥The viewfinder can be raised up to approximately 50 o A.

≥When moving the viewfinder, be careful not to

- 25 -

About the Touch Menu

Touch (left side)/ (right side) of on the Touch Menu to switch the operation icons.

≥It is also possible to switch the operation icons by sliding the Touch Menu right or left while touching it.

T

W

ATouch Menu

BYou can change the operation icons to display. (l 45)

CDisplayed only in Intelligent Auto Plus Mode (l 67) and [Miniature Effect]/[8mm movie]/ [Silent movie] of the Creative Control Mode (l 67).

D (For the WXF1 / VXF1 ) / E (For the VX1 / V800 )

Displayed in the following situations:

jDisplayed only in [Time Lapse Rec] of the Creative Control Mode (l 67), HDR Movie Mode (l 53), Scene Mode (l 71), Manual Mode (l 79), FULL HD Slow Motion Video Mode (l 73, 77), 4K Photo Mode* (l 77), Stop Motion Animation Assist Mode (l 78)

j(For the WXF1 / VXF1 / VX1 )

When Slow & Quick Video Mode or Slow Zoom Mode in Cinema Like Effect Mode is in use (l 72, 74)

F(For the WXF1 / VXF1 / VX1 )

Displayed in the thumbnail view of 4K MP4 scenes. (l 37)

* For the WXF1 / VXF1 / VX1

- 26 -

∫ To display the Touch Menu

Display of the Touch Menu will disappear when no touch operation is performed for a specific period of time during recording of motion picture/still picture. To display it again, touch .

≥ Do not touch on the LCD monitor with hard pointed tips, such as ball point pens.

- 27 -

Preparation

Setting date and time

The clock is not set at the time of purchase. Make sure to set the clock.

≥When you turn on this unit, the message “Set home region and date/time.” may be displayed. Select [YES], and follow the steps below to make these settings:

jStep 3 in [SET WORLD TIME] (l 41) jSteps 2–3 of “Setting date and time”

1 Select the menu. (l 40)

MENU : [SETUP] # [CLOCK SET]

2 Touch the date or time to be set, then set the desired value using /.

ADisplaying the World Time setting (l 41):

[HOME]/ [DESTINATION]

≥ The year can be set between 2000 and 2039.

3 Touch [ENTER].

≥Touch [EXIT] to complete the setting.

≥The date and time function is driven by a built-in lithium battery.

≥If the time display becomes [- -], the built-in lithium battery needs to be charged. To recharge the built-in lithium battery, connect the AC adaptor or attach the battery to this unit. The battery is still being recharged even if the unit is off. Leave the unit as it is for approx. 24 hours and the battery will maintain the date and time for approx. 4 months.

- 28 -

Basic

Before recording

∫ Basic camera positioning

1Hold the unit with both hands.

2Put your hand through the grip belt.

3It is convenient to use the Recording button icon A when holding the unit at waist level.

≥When recording, make sure your footing is stable and there is no danger of colliding with another person or object.

≥When you are outdoors, record pictures with the sunlight behind you. If the subject is backlit, it will become dark in the recording.

≥Keep your arms near your body and separate your legs for better balance.

≥Do not cover the microphones with your hand etc.

∫ Basic motion picture recording

≥ The unit should normally be held steady when recording.

≥ If you move the unit when recording, do so slowly, maintaining a constant speed.

≥ The zoom operation is useful for recording subjects you cannot get close to, but overuse of zoom in and zoom out can make the resulting motion picture less enjoyable to watch.

∫ Recording Yourself

Rotate the LCD monitor towards the lens side.

≥ The image is horizontally flipped as if you see a mirror image. (However the image recorded is the same as a normal recording.)

≥ Only some indications will appear on the screen. When

appears, return the direction of the LCD monitor to normal position and check the warning/alarm indication.

(l 258)

- 29 -

Screen displays when recording yourself

≥The following icons are displayed on the screen when you are recording yourself. Touch the icons to operate.

Zooming out: wide angle (l 51)

Zooming in: close-up (l 51)

Starting/pausing motion picture recording*1 (l 32)

Recording still pictures*2 (l 34, 35, 36)

*1 In Motion Picture Recording Mode only

*2 In Still Picture Recording Mode, it focuses and then records the still picture after touching.

≥When using the Remote Pan Tilt Cradle (l 274), etc., icons may not be displayed, depending on the settings of this unit.

∫ Adjusting the grip belt

Adjust the grip belt to suit the size of your hand.

A Buckle

BHolder

1Open the buckle

2Pull the end of the belt

3Pass the belt through the holder

≥You can make the grip belt tighter by pulling the belt towards the buckle and then pulling it forward again.

- 30 -