Table of Contents
Advertisement
OPERATOR'S MANUAL
MODEL #100386
4200 PSI PRESSURE WAShER
or visit championpowerequipment.com
READ AND SAVE ThIS MANUAL. This manual contains important safety precautions which should be read and understood before operating the product.
Failure to do so could result in serious injury. This manual should remain with the product.
Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice.
Made in China - REV 20170516
Champion Power Equipment, Inc., Santa Fe Springs, CA USA
Advertisement
Table of Contents
Related Manuals for Champion 100386
Summary of Contents for Champion 100386
- Page 1 Failure to do so could result in serious injury. This manual should remain with the product. Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice. Made in China - REV 20170516 Champion Power Equipment, Inc., Santa Fe Springs, CA USA...
- Page 2 TAbLE Of CONTENTS 100386 - 4200 PSI PRESSURE WAShER TAbLE Of CONTENTS Storage ........... . .
-
Page 3: Safety Definitions
100386 - 4200 PSI PRESSURE WAShER INTRODUCTION SAfETY DEfINITIONS Congratulations on your purchase of a Champion Power The purpose of safety symbols is to attract your attention to Equipment (CPE) product. CPE designs, builds, and supports possible dangers. The safety symbols, and their explanations, all of our products to strict specifications and guidelines. -
Page 4: Safety Symbols
SAfETY SYMbOLS 100386 - 4200 PSI PRESSURE WAShER SAfETY SYMbOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to more safely operate the product. -
Page 5: Important Safety Instructions
IMPORTANT SAfETY INSTRUCTIONS 100386 - 4200 PSI PRESSURE WAShER IMPORTANT SAfETY INSTRUCTIONS WARNING Sparks can result in fire or electrical shock. WARNING When servicing the pressure washer: The engine exhaust from this product contains chemicals known to the State of California to cause cancer and birth Disconnect the spark plug wire and place it where it cannot defects and other reproductive harm. - Page 6 IMPORTANT SAfETY INSTRUCTIONS 100386 - 4200 PSI PRESSURE WAShER WARNING NOTICE NEVER spray flammable liquids or use pressure washer in Improper treatment or use of the pressure washer can areas containing combustible dust, liquids, or vapor. damage it, shorten its life and void your warranty.
- Page 7 IMPORTANT SAfETY INSTRUCTIONS 100386 - 4200 PSI PRESSURE WAShER WARNING DANGER Use of pressure washers can create wet walking surfaces. Fuel and fuel vapors are highly flammable and extremely While using a pressure washer, forces from the gun can explosive.
-
Page 8: Controls And Features
CONTROLS AND fEATURES 100386 - 4200 PSI PRESSURE WAShER CONTROLS AND fEATURES Read this operator’s manual before operating your pressure washer. Familiarize yourself with the location and function of the controls and features. Save this manual for future reference. 1. Nozzles 11. -
Page 9: Parts Included
ASSEMbLY 100386 - 4200 PSI PRESSURE WAShER ASSEMbLY Parts Included Gun Assembly Your pressure washer requires some assembly. This unit ships from our factory without oil. It must be properly serviced Spray Wand (A)..............1 with fuel and oil before operation. If you have any questions Trigger Gun (B) .............. - Page 10 ASSEMbLY 100386 - 4200 PSI PRESSURE WAShER 5. Before adding fuel and oil, tip the pressure washer on its 10. Attach the metal support bracket to the back & bottom of side. the frame using the M8 x 55mm bolt included. Rubber feet facing outward.
-
Page 11: Add Engine Oil
ASSEMbLY 100386 - 4200 PSI PRESSURE WAShER Add Engine Oil Degrees Celsiusº (Outside) CAUTION Full Synthetic 5W-30 DO NOT attempt to crank or start the engine before it has been properly filled with the recommended type and amount of oil. Damage to the pressure washer as a result of failure to follow these instructions will void your warranty. -
Page 12: Add Fuel
ASSEMbLY 100386 - 4200 PSI PRESSURE WAShER Add fuel NOTICE 1. Use clean, fresh, regular unleaded fuel with a minimum Our engines work well with 10% or less ethanol blend fuels. octane rating of 85 and an ethanol content of less than When using blended fuels there are some issues worth 10% by volume. -
Page 13: Connect The High Pressure Hose
ASSEMbLY 100386 - 4200 PSI PRESSURE WAShER Connect the high Pressure hose 1. Completely uncoil and straighten the high pressure hose to prevent kinks. 2. Align the male end of the high pressure hose to the quick change connector on the high pressure pump. -
Page 14: Pressure Washer Location
OPERATION 100386 - 4200 PSI PRESSURE WAShER OPERATION NOTICE Keep choke lever in “CHOKE” position for 2 pulls of the Pressure Washer Location recoil starter. After second pull, move choke lever to the This pressure washer must have at least 5 ft. (1.5 m) of “RUN”... -
Page 15: High Pressure Wash
OPERATION 100386 - 4200 PSI PRESSURE WAShER Use the following table to determine which nozzle to use. NOZZLE SELECTION GUIDE 0° 15° 25° 40° Soap HIGH PRESSURE WASH PRESSURE WASH 0° 15° 25° 40° Soap Abrasive Gentle Concrete, Brick, Masonry... -
Page 16: System Flush
OPERATION 100386 - 4200 PSI PRESSURE WAShER System flush are customized for pressure washer use on specific cleaning tasks. Pressure washer detergents are as thick as water. After using detergents, flush the suction system by placing the Using thicker detergents – like dish soap – will clog the detergent suction tube into a bucket of clean water. -
Page 17: Stopping The Engine
To alleviate high altitude issues other than the natural power The owner/operator is responsible for all periodic maintenance. loss, Champion Power Equipment can provide a high altitude Complete all scheduled maintenance in a timely manner. carburetor main jet. The alternative main jet and installation instructions can be obtained by contacting Customer Support. -
Page 18: Pump Oil
MAINTENANCE 100386 - 4200 PSI PRESSURE WAShER Cleaning the Pressure Washer Changing the Engine Oil Change oil when the engine is warm. Refer to the oil CAUTION specification to select the proper grade of oil for your operating environment. -
Page 19: Cleaning The Air Filter
Service your pressure washer more frequently when operating retains the end of the spark arrester to the muffler. in adverse conditions. Contact our help line at 1-877-338-0999 to locate the nearest Champion Power Equipment certified 3. Remove the spark arrester screen. service dealer for your maintenance needs. -
Page 20: Winter Storage
3. In order to prevent the pump from freezing you will need to insert RV antifreeze. * To be performed by knowledgeable, experienced owners or Champion Power Equipment certified dealers. 4. You will need approximately 6 oz. (177.4 mL) of RV antifreeze, a funnel, and approximately 12 in. - Page 21 STORAGE 100386 - 4200 PSI PRESSURE WAShER DANGER Engine exhaust contains odorless and colorless carbon monoxide gas. To avoid accidental or unintended ignition of the product during periods of storage, the following precautions should be followed: – When storing the pressure washer for short or long periods of time make sure that the engine switch and the fuel valve are set in the "OFF"...
-
Page 22: Specifications
Start Type ..............Manual Important Message About Temperature Oil Specifications Your Champion Power Equipment product is designed and rated DO NOT OVERFILL. for continuous operation at ambient temperatures up to 40°C Type .......... -
Page 23: Parts Diagram
SPECIfICATIONS 100386 - 4200 PSI PRESSURE WAShER Parts Diagram... -
Page 24: Parts List
SPECIfICATIONS 100386 - 4200 PSI PRESSURE WAShER Parts List Part Number Description Qty. Part Number Description Qty. 46.103 Engine High-Pressure Hose, 255.250100.05 50ft. Key, SQ 4.78 x 4.78 2.14.001 20 252.201300.00 x 40 21 253.201100.02.78 Frame 2.08.011 Bolt 3/8-16 × 30 22 1.6177.1.08... -
Page 25: Engine Parts Diagram
SPECIfICATIONS 100386 - 4200 PSI PRESSURE WAShER Engine Parts Diagram... -
Page 26: Engine Parts List
SPECIfICATIONS 100386 - 4200 PSI PRESSURE WAShER Engine Parts List Part Number Description Qty. Part Number Description Qty. 39 45.030007.01 Cover, Crankcase 21.061300.00 Recoil Handle 40 22.031000.01.48 Oil Filler Cap, Yellow 1.5789.0608 Flange Bolt M6 x 8 1.5789.0840.0.8 Flange Bolt M8 x 40 Recoil Starter Cover, 46.061100.00.2... - Page 27 SPECIfICATIONS 100386 - 4200 PSI PRESSURE WAShER Part Number Description Qty. Part Number Description Qty. 78 46.040201.00 Retainer, Rocker Arm Pipe, Fuel Valve To 115 46.070011.01 Carburetor Rocker Arm, Intake 79 46.040009.00 116 46.070010.00 Valve Fuel Tank Veil 117 5.1010.003.3...
-
Page 28: Troubleshooting
SPECIfICATIONS 100386 - 4200 PSI PRESSURE WAShER Troubleshooting Problem Cause Solution No fuel. Add fuel. Pressure washer will not start. Faulty spark plug. Replace spark plug. Fill crankcase to the proper level. Place Pressure washer will not start; Low oil level. - Page 29 The United States Environment Protection Agency (U.S. EPA.) and the California Air Resources Board (CARB) Emission Control System Warranty Your Champion Power Equipment (CPE) engine complies with both the U.S. EPA and state of California Air Resources Board (CARB) emission regulations.
- Page 30 EMISSION CONTROL SYSTEM WARRANTY The following are specific provisions relative to your Emission Control System (ECS) Warranty Coverage. 1. APPLICABILITY: This warranty shall apply to 1995 and later model year California small off-road engines (for other states, 1997 and later model year engines). The ECS Warranty Period shall begin on the date the new engine or equipment is delivered to its original, end-use purchaser, and shall continue for 24 consecutive months thereafter.
- Page 31 You must take your CPE engine or the product on which it is installed, along with your warranty registration card or other proof of original purchase date, at your expense, to any Champion Power Equipment dealer who is authorized by Champion Power Equipment, Inc. to sell and service that CPE product during his normal business hours.
- Page 32 Champion Power Equipment, Inc (CPE) and Environment and Climate Change Canada (ECCC) Emission Control System Warranty Your Champion Power Equipment (CPE) engine complies with Environment and Climate Change Canada (ECCC) emission regulations. YOUR WARRANTY RIGHTS AND OBLIGATIONS: CPE is pleased to explain the Emission Control Systems Warranty on your 2017 small off-road engine.
- Page 33 EMISSION CONTROL SYSTEM WARRANTY The following are specific provisions relative to your Emission Control System Warranty Coverage. Emission Control System Warranty (ECS Warranty): 1. APPLICABILITY: The ECS Warranty Period shall begin on the date the new engine or equipment is delivered to its original, end-use purchaser, and shall continue for 24 consecutive months thereafter.
- Page 34 You must take your CPE engine or the product on which it is installed, along with your warranty registration card or other proof of original purchase date, at your expense, to any Champion Power Equipment dealer who is authorized by Champion Power Equipment, Inc. to sell and service that CPE product during his normal business hours.