Automatic rebating machine

Gubisch Fräsaggregat

Condition: used, Number of machnines 15 Stk Loading meters, approx. - m Total weight, approx. - kg Company closure for wooden window construction ----- Machines will be available from August/September 2024. Pos. 1: Weinig, PFA 17N, built in 1967 Four-sided planer, 6 spindles, chain drive, with glazing bead separation, with planing heads Continuous feed, working width 170 mm, working height 120 mm Electric height adjustment feed beam Pos. 2: MAPO Spu 180, built in 1992, finishing machine, mobile Pos. 3: Gubisch CW 2, built in 1998, angle system with return, with Leitz IV 68 wood, wood-aluminum; Gold IV 78 wood 1 slot spindle, 3 profile spindles Q8m9yfjh7j Pos. 4: Götzinger OBM, built in 1998 corner bearing and olive drilling machine, 1 drill head Olive, 1 x drill head corner bearing Roto NT with left and right roller tables and stops, drilling on individual parts or glued frame Pos. 5: Panhans type 259, built in 1995, swivel spindle milling machine with extended support table and frame milling ruler, Feeder Hafffner 4 rollers, 3000/4000/5000/6000 rpm Pos. 6: Panhans type 690, built in 1991, panel saw with swiveling saw blade, with cross stop Pos. 7: Elumatec type DG 79, built in 1998, double miter saw 3 m Pos. 8: Hema band saw, mobile Pos. 9:Rapid chain milling machine Pos. 10: Klein and Söhne, combined jointer and thickness planer Pos. 11: Hofmann Dübelfix DBL, drilling machine Pos. 12: Hess Presse pneumatic Pos. 13: Filter house with silo, filter system, fan Pos. 14:Spänex SHB 50-250-SPS, built in 1998 briquetting press with automatic control Pos. 15:Spänex return air duct for summer/winter operation, return air ceiling filter ----- Total price from location: 30,000.00 euros Machines must be dismantled and loaded by the buyer himself. Subject to errors and prior sale.

Year of construction: 1993, Condition: good (used), Double-shaft cross-cut circular saw with 2 x double-shaft saw unit. Horizontal and vertical. For sawing slats, battens, slats, separating cuts with small kerf. Cutting height 200 mm. Cutting width 200 mm. Continuous feed system with rollers and pneumatic pressure. Horizontal saws 2 x 30 KW motors. Vertical saws 2 x 55 KW motors. Feed frequency controlled from 0 - 60 m / min Electric height adjustment. Electric width adjustment of the feed rollers. Electric control cabinet with controls and accessories. Large number of saw bushes, as well as many new and used HM saws. Protective devices dismantled for transportation. Blrkdl3xf2v

Year of construction: 1972, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 1226, 6 axles, adjustable, with electric motor and control box, in working order. Bl0jv2udndq

Condition: as good as new (ex-display), for multi-blade saw GRIMME, total length 205 mm, clamping length 165 mm, bore-Ø 40 mm, outer-Ø 60 mm, flange-Ø 100 mm, 2 driving grooves 12 mm, clamping nut-Ø 100 mm with right-hand thread Cel7aben3u

Year of construction: 1980, Condition: good (used), Gubisch planer and moulder 172/7 S/N 3425 80 Year of manufacture 1980 length of the planing table 1950 mm planing width maximum 170 mm planing height maximum 120 mm Spindle diameter 40 mm 7 planing shafts : 1.bottom planing shaft 7,5 kW 2.right joining shaft 3,0 kW 3.left shaft 4,0 kW Gxigmk 4.right shaft 4,0 kW 5.Top Thickness Shaft 4.0 kW 6.Top Thickness Shaft 5.5 kW 6.Uni shaft top / bottom 3,0 kW Voltage 380 V, 50 Hz Power consumption 33.6 Kw Feed motor 1,5 kW Feed speed infinitely variable 5 - 30 m/min. weight 3300 kg Dimensions ( L X W x H )4800 mm x 1400 mm x 1850 mm technical data under reserve

Year of construction: 1997, Condition: used, Number of spindles:5 St. Bhbbsjbptsa Working width:230 mm Working height:130 mm

Year of construction: 1991, Condition: good (used), Functionality: fully functional, Gubisch window production line: Production line components: 1. four-sided planing machine 2. cross feeder 3. longitudinal processing (slot/tenon) 4. cross processing inside 5. sanding machine 6. take-off table 7. electrical control cabinet Dimensions: - Length: 33.55 meters Lpanxbl - Width (with switch cabinet) 5.34 meters - Width (without switch cabinet) 4.97 meters Available on Q1/Q2 2025

Year of construction: 1994, Condition: used, Window processing line, CNC window production system, window angle system -Double end tenoner, make: Gubisch, type: DST H -Year of construction: 1994, serial no.: 7593 -2x 2 tool towers with 5 heads each -built tools from: Leitz -Shaft mount: Ø 50 mm -Max. Tool: Ø 350 mm -Max. Tool height: 650 mm -4x milling motors 11 kW 2800 rpm -Control, make: Gubisch -Roller conveyor, L/W: 4,000 x 200 mm -Milling machine, make: Gubisch, type: FN2000 -Year of construction: 1994, Ser.-No.: 7490 -4 milling shafts -4x milling motors 9.2 kW 2800 rpm -Tools from: Leitz -Shaft support: approx. Ø 40 mm Qlodfkmma -Max. Tool: Ø 230 mm -Max. Tool height: 350 mm -m. Feed roller conveyor, L/W: 4,500 x 150 mm -Discharge roller conveyor, L / W: 4,000 x 200 mm -Tool cabinet -Switch/fuse box

Condition: excellent (used), Four side planer Gubisch electrical adjustment of planing height and width planing width 23cm planing height 12cm arrangement of spindles bottom-right-left-upper universal - all spindles vertically and horizontally adjustable all spindles on separate engines stepless feed speed adjustment Dsmxcp9 feed on gimbal the machine in the original worked in a small plant very nice condition,

Condition: good (used), 22.9 kW 3uzzftru You can call or write us. We can speak and write German and Russian. You can also send messages in English

Year of construction: 1995, operating hours: 123 h, Condition: excellent (used), machine/vehicle number: 123, 2 cross-cut saws > 2 cross-cut saws electronically controlled: yes > Number of tools: 1 pc. > Spindle speed: 3000 rpm > Tool diameter max .: 350 mm > Motor power: 3 kW 2 left and 2 right slotted spindles vertical > Number of tools: 3 pcs. > Spindle stroke: 3x100 mm > Spindle speed: 4200 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Tool diameter max .: 320 mm > Motor power: 11 kW B089stavzv 3 profiling spindle vertical right > Number of tools: 3 pcs. > Vertical spindle stroke: 3x100 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Tool diameter max .: 230 mm > Motor power: 9.2 kW 3 profiling spindle vertical left > Number of tools: 3 pcs. > Vertical spindle stroke: 3x100 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Tool diameter max .: 230 mm > Motor power: 9.2 kW Other features > online-capable: yes > Double part package: yes > Screen control: yes

Year of construction: 1988, Condition: used, machine/vehicle number: nicht zutreffend, Number of spindles:4 St. Sue7j Working width:230 mm Working height:140 mm Length of the planing table:2000 mm

Year of construction: 1971, Condition: used, Type G617 Working width 170 mm Kx3xhuc7 Working height 110 mm Infeed table length 1600 mm 7 spindles B, R, T, L, R, T, B Spindle diameters 40 mm Feeding speed 30 m/min Made in Germany 1971 y. Transport dimensions 4900x1100x1500mm Weight 3100 kg Price 2400 Eur (EXW Jonava, Lithuania)

Year of construction: 1996, Condition: reconditioned (used), machine/vehicle number: 16319, max. machining dimensions 220 x 120 mm (raw wood dimension max. 230 x 130 mm) min. machining dimensions 15 x 6 mm, automatic positioning "Hecht-Posiomat", feed rate 6 - 22 m/min, feed roller pressure 6 bar, spindle diameter D = 40 mm, max. chip removal 10 mm feed table 2.000 mm, feed motor 2,2 kW, height adjustment 0,37 kW, dressing spindle 4 kW, joining spindle 4 kW, left profile spindle 4 kW, thickness spindle 5,5 kW, 2ter9ezk glazing bead separation, ex location Seevetal, in "as is" condition as viewed, subject to prior sale, without freight and packing

Year of construction: 2024, Condition: new, Gubisch feed rollers. - Helical toothed steel rollers, hardened and hard chrome plated. Cjerq3mzcm D 140, W 50, d 30

Condition: used, Functionality: fully functional, FRÄSAGGRGAT HOMAG Blbg0gznkg0 controlled universally swiveling 360

Year of construction: 2024, Condition: as good as new (ex-display), Compact and flexible in the smallest of spaces. At a length of only 2.13 m, workpieces are finished here. Equipped with a 1.1 KW high-frequency pre-milling unit and diamond-tipped spiral jointing cutter, Teflon-coated glue unit, pre-cut-off unit and HF multifunction milling unit, 2 free spaces for finishing units, such as a glue scraper unit and buffing unit. Easy operation via 3.5" color touch screen. ► Control via 3.5 inch color touch screen ► pre-milling unit with a 1.1 KW high-frequency motor with diamond-tipped spiral milling cutter in the counter-rotation ensures clean and Tear-free joining of the workpieces before the edge is banded ► Teflon-coated glue Pot with automatic stand-by function ► Automatic edge feeding with roller plate D = 600 mm for Edge material as roll goods as well as fixed lengths of 0.4 – 2.0 mm for ABS, PVC, or melamine edges ► Pressure station with 2 pressure rollers for optimal pressure of the Edge material. ► HF multifunction milling unit - suitable for radius and flush milling of the longitudinal edge, as well as for the front and rear edge of the workpiece, incl. vertical rounding of the edge ► 2 free spaces for finishing units such as glue scraper unit or buffing unit ► Workpiece chain feed with rubberized chain plates and Double Roller Upper Pressure ► Pressure bar with central adjustment and SIKO display ► Fixed workpiece support (optionally extendable workpiece support for large workpieces) Fqkn0jxqj ► 400 mm long infeed lineal with support ► LED lighting in the cabin (optional) ► Machining of workpieces with a thickness of 10 – 45 mm ► Feed speed 6.5 m/min ► Machine length 2130 mm 6638cfaeb43cc

Condition: used, Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -HOMAG milling unit for joint milling -with heavy dovetail guide -1x engines Perske -Motor type: -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5860 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1800/1400/H1300 mm -Weight: 712 kg S0yeo0tqi

Condition: used, Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines Uvdrhgwk -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -HOMAG milling unit for joint milling -with heavy dovetail guide -1x engines Perske -Motor type: -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1800/1400/H1300 mm -Weight: 712 kg

Year of construction: 2015, Condition: ready for operation (used), General Data Bjgcdwjwzec Measurements width 4200 mm Measurements depth 5900 mm Measurements height 3009 mm Machine weight 2240 kg General Data Measurements width 4200 mm Measurements depth 5900 mm Measurements height 3009 mm Machine weight 2240 kg This Concept Laser M2 cusing 3D Printer was manufactured in the year 2015. Application Types 3DPrinting

Year of construction: 1999, Condition: ready for operation (used), General Data Measurements width 2350 mm Measurements depth 5200 mm Measurements height 2390 mm Machine weight 3750 Kg Control Unit Brand BECKHOFF Application Types Bending Guxjbdt3

Year of construction: 2008, Condition: ready for operation (used), General Data Machine weight 1920 kg Bjgccsrjwdw This Schröder Fasti 145-18/075 Bending machine was manufactured in the year 2008 in Germany. Application Types Bending

Year of construction: 2017, Condition: ready for operation (used), Control Unit Brand HAAS Main Drive Spindle speed range 4800 Spindle motor power 22.4 KW Number of axis 3 Blbrysnwkmm This HAAS DS-30SSY Lathe was manufactured in the year 2017 in the United States. It is equipped with a HAAS control unit and has 3 axis. The machine has a spindle speed of 4800 rpm. Application Types Turning

Year of construction: 2006, Condition: ready for operation (used), General Data Machine weight 2100 kg Control Unit Brand FANUC Main Drive Spindle speed range 15000 Spindle motor power 3.7 kW Number of axis 6 Blbr0icj838 Additional Equipment Bar Loader (IEMCA) This CITIZEN Cincom K16 VII Swiss Type Turning machine was manufactured in 2006 in Germany. It is equipped with a FANUC control unit. The machine has a spindle speed of 15000 rpm. It comes with a IEMCA GENIUS 118 37 LL bar loader. Check image and video gallery for more details. Application Types Turning

Year of construction: 2001, operating hours: 45,716 h, Condition: ready for operation (used), Control Unit Brand TORNOS-BECHLER FANUC Model PNC DECO Main Drive Spindle speed range 1000 - 12000 Number of axis 6 This TORNOS DECO 13 BASIC Lathe was manufactured in the year 2001 in Switzerland and has 45716 production hours. It is equipped with a TORNOS-BECHLER FANUC PNC DECO control unit and has 6 axis. Application Types Oucaqqgzfh Turning