Motor

ADDA C200 LT/4

Condition: used, Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1380 rpm Kuokigjl -Shaft: Ø 19 mm -Construction: B5 -Protection class: EX -Number: 2x available -Price: per piece -Dimensions: 280/245/H200 mm -Weight: 22 kg

Condition: used, Electric motor, three-phase motor Nmoyx -Power: 1.5 kW -Speed: 1380 rpm -Shaft: Ø 24 mm -Construction: B5 -Protection class: IP 55 -Price: per piece -Number: 1 pieces -Dimensions: 335/200/H230 mm -Weight: 14.5 kg

Condition: ready for operation (used), Adda Antriebstechnik TF-CP225M-4 three-phase motor, SN:198 ,used, normal signs of wear, 100% functional, scope of delivery according to photos,ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Jy7muu

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380V 50Hz Scixk9vts -Output: 165V 300Hz -Power: 25KVA -Dimensions: 800/400/H320 mm -Weight: 224kg

Condition: used, Three-phase motor with 2 speeds, electric motor -Motor: is unused X8pjxywh9 -Power: 12.5/18.5 kW -Speed: 970/1460 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 55 -pole changing -Dimensions: 740/390/H450 mm -Weight: 148 kg

Year of construction: 2009, Condition: used, weight 56000 kg Pp2xbqlmwl engine output 75.00 kW longitudinal stroke der Senke 800 mm

Year of construction: 2021, Condition: new, The Agricracker AC200 is a milling machine for structure milling. Grains, beans & seeds are welknown applications. Even as fet and wet products, which are better grindable then known milling machines. Bd3ystzo Capacity 0-8 ton / hour. Flyer at the bottom of this page. Milling trials are possible.

Condition: ready for operation (used), Sancassiano PLT C 200, 200 lt planetary mixer, full stainless machine, 2 sets of tools, scraper, 4 bowls, very good ex bakery condition Cr7mbprcme

Year of construction: 2019, Condition: good (used), Edgeband thickness max 6 mm Panel thickness max 60 mm 072rftbg Thickness of coiled edgeband max 3 mm Workpiece length min 140 mm Feedrate max 10 m/min Preheating zone Glue system granulate glue pot below feeding chain Quick-change glue pot Suitable for PUR glue Spraying device Premilling unit Trimming saw 2 motors Flush/radius/chamfer milling units 1 Corner rounding unit 2 motors Scraper unit Profile scraper, Flat scraper Buffing unit Magazine for single strips Aggregates actuated by control NC-axes Type right-side machine Machine length 3.500 mm Control FORMAT 4 SMARTOUCH M-MOTION CE marking Total connection 15 kW

Condition: excellent (used), CATALOG NO. 6873 TECHNICAL DATA - max width of the workpiece 240mm - max height of the workpiece 190mm 4 spindles: 1) horizontal bottom 240mm 5.5kW 2) vertical right 190mm 5.5kW 3) vertical left 190mm 7.5kW 4) horizontal top 240mm 7.5kW - all spindles adjustable up / down, right / left - spindle diameter 40mm - 6 introductory, toothed, pulling rollers from above - 2 rollers leading out, pulling, rubber, smooth from above - from the bottom, a toothed, pulling, torsion roller in the table top in front of the first spindle - from the bottom, 2 pulling rollers, metal, smooth - 4 side clamps from the bottom - feed on cardan shafts - rollers pressed pneumatically - smooth adjustment of the feed speed on the inverter 6-30m/min - feed motor 3kW - working pressure 8-10bar - electric setting of planing thickness - body lifting motor 0.75 kW - central lubrication of the countertop - length of the introductory tabletop 2180mm - diameter of extraction stubs 4x150mm - dimensions length/width/height 4000x1850x1800mm - weight about 3300 kg ADVANTAGES – Italian production – for 4 heads – perfect / like new condition – ideal for wet and dry wood – used planer Net price: PLN 88900 2vd7ba Net price: 20205 EUR Net price calculated according to the exchange rate of 4.4 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Condition: used, ADDA synchronous motor is being sold as it is no longer used in our factory. Isunfde

total length: 131 cm, total width: 39 cm, total height: 4 cm, Year of construction: 2023, Condition: like new (used), Functionality: fully functional, 120 pcs. Shelves approx. 131 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : Length: approx. 131.2 cm Width: approx. 39 cm Height: approx. 4 cm Scope: 120 pcs. Shelves SSI Schäfer R3000 Load : max. 100 kg per shelf Surface : sendzimir galvanized II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Our recommendation : Let us know what you need... Dorflx We will be happy to help you with the realization of your projects, from planning and ordering to installation.

motor power: 22 W, total length: 600 cm, overall weight: 1,300 kg, opening width: 12 mm, sieve perforation: 380 mm, warranty duration: 2,024 months, Year of construction: 2021, Condition: like new (used), Functionality: fully functional, machine/vehicle number: #11510, The machine works perfectly. It has been completely overhauled by AMIS C7qua3im

Condition: ready for operation (used), Electro Adda FC71FE-8/2 3~ motor with Bonifiglioli MVF 49/F angular gear (i=14) , serial no. according to photo , hole spacing of mounting holes: 63 x 63 mm, Ø drive shaft: 14 mm ,used, small traces of use, 100% functional Cj2ffjnloq

Condition: excellent (used), CATALOG NO. 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of the workpiece 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000 rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3 manually adjustable up/down, right/left - 2 spindle, manually adjustable right/left - 2 spindle, electrically adjustable up/down - spindle 2 and 3 are equipped with brakes in advance: - 3 introducing, pulling, metal toothed rollers - 1 double output, pulling, rubber roller from down: - pressure on insertion - grooved top - pulling roller, metal, smooth - electric setting of planing thickness - smooth adjustment of feed speed 6-24m/min - 3kW feed motor - feed on cardan shafts - length of the introductory tabletop 1970mm - automatic tabletop lubrication system - diameter of the exhaust port 1x150mm, 2x140mm - dimensions length/width/height 3070x2000x1800mm - weight 2000kg ADVANTAGES Bqakjqgmme – German production – for 3 heads – for processing lamellas – grooved top – heads included – unpainted - very good condition – used planer Net price: PLN 175900 Net price: EUR 39977 Net price calculated at the exchange rate of PLN 4.4/EUR (with larger exchange rate fluctuations, the price may change) ​

total length: 128 cm, total width: 39 cm, total height: 4 cm, Year of construction: 2023, Condition: like new (used), Functionality: fully functional, 120 pcs. Shelves approx. 128 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : Length: approx. 128.1 cm Width: approx. 39 cm Height: approx. 4 cm Dorfj2 Scope: 120 pcs. Shelves SSI Schäfer R3000 Load : max. 100 kg per shelf Surface : sendzimir galvanized II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Our recommendation : Let us know what you need... We are happy to help you with the realization of your projects, from planning and ordering to installation. If you are interested, please contact us by telephone, you will find our telephone number on our company page.

Condition: ready for operation (used), Electro Adda FC71FE-8/2 3~ motor with Bonifiglioli VF44 F1 P71B5 right angle gearbox (i=14) , serial no. according to photo , hole spacing of mounting holes: 62 x 62 resp. 46 x 46 mm, Ø hole for drive shaft: 18 mm ,used, small traces of use, 100% functional Bc2njkngw

Condition: excellent (used), CATALOG NO. 7178 TECHNICAL DATA - loading hopper inlet 790x600mm - outlet for chipped wood, diameter 160 mm - rotor working width 580mm - main engine 18.5kW Bg9i0gqrvqu - pump motor 0.75kW - number of knives 14 pcs - knife dimensions 30x30mm - 12mm, 15mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1740x1150x1610mm - weight 1050kg ADVANTAGES – German production – O&M documentation – pressure drawer – autoreverse – used chipper, very good condition Net price: PLN 48900 Net price: EUR 11114 Net price calculated at the exchange rate of PLN 4.40/EUR (with larger exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Electro Adda FC71FE-8/2 3~ motor with Bonifiglioli VF49 F1 P1B5 angular gear (i=14) , serial no. according to photo , hole spacing of mounting holes: 63 x 63 mm, Ø hole for drive shaft: 13 mm ,used, minor signs of wear, 100% functional Hdui7kt

Condition: excellent (used), CATALOG NO. 7145 TECHNICAL DATA - loading hopper inlet 800x600mm - outlet for chipped wood, diameter 125 mm - rotor working width 580mm - main engine 18.5kW - pump motor 0.75kW - number of knives 14 pcs - knife dimensions 40x40mm - 20x15mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1820x1220x1650mm - weight 1232kg ADVANTAGES Bfinqc223bc – German production – original DTR + CE documentation – V-type rotor – pressure drawer – autoreverse – unpainted – used chipper, very good condition Net price: PLN 49900 Net price: EUR 11341 depending on the price of EUR 4.4 (Prices may vary with higher fluctuations)

Condition: ready for operation (used), Electro Adda FC80FECC-2 3~ motor with SCM gearbox (i=3.9:1) , serial no. according to photo , hole spacing of mounting holes: 140 mm, Ø hole for output shaft: 12 mm hexagonal ,used, normal signs of wear, 100% functional Cj2fh9h8cz

Condition: excellent (used), CATALOG NUMBER 6651 TECHNICAL DATA - max width of the workpiece 220mm - max height of the workpiece 120mm - 4 spindles: 1) horizontal bottom 220mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal upper 220mm 5.5kW - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - from above, 4 introducing rollers, toothed, including 2 double ones - from above, 1 pulling roller, smooth, rubber - rubber, pulling roller at the bottom - pneumatically pressed rollers - feed on cardan shafts C7h7vlakm - 1.1kW feed motor - 0.37kW lifting motor - electric adjustment of the planing thickness - length of the introductory top 1980mm - side pressure - smooth adjustment of the feed speed 8-16m / min - central lubrication - diameter of the extraction port 5x140mm - locked in the cabin - dimensions length / width / height 3400x1500x1700mm - weight about 1670 kg Net price: PLN 39900 Net price: EUR 9068 Net price, calculated at the rate of 4.40 PLN / EUR (with greater fluctuations in the rate, the price may change)

Condition: ready for operation (used), Electro Adda FC80FECC-2 3~ motor with SCM gearbox (i=3.9:1) , serial no. according to photo , hole spacing of mounting holes: 140 mm, Ø hole for output shaft: 12 mm hexagonal ,used, normal signs of wear, 100% functional Fyfu0209

Condition: ready for operation (used), Electro Adda CF C1 80MT frequency converter , serial no. according to photo ,used, normal signs of use, 100% functional ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Cj2femz0sn

Condition: ready for operation (used), Electro Adda FC80FECC-2 3~ motor with SCM gearbox (i=3.9:1) , serial no. according to photo , hole spacing of mounting holes: 140 mm, Ø hole for output shaft: 12 mm hexagonal ,used, normal signs of wear, 100% functional Vwmoo3