power distribution - Siemens

SPEEDFAX TM 2007–2008 Product Catalogpower distributionResidentialCommercialIndustrials

When Waiting Is Not An Option,ModPro Plus Delivers.2007 Siemens Energy & Automation, Inc.modproModPro Plus TM means shorter turn-around for standard and modifiedNEMA control products. Instead of waiting on the factory, our ModProPlus distributors can turn your order around as quickly as the same day.We offer a wide variety of high quality products and modificationsincluding combination and non-combination starters that are guaranteedfor trouble-free operation.sFor more information or to contact a sales representative, call,e-mail, or visit our website.Siemens Energy & Automation, Inc. 1-800-964-4114 info.sea@siemens.com www.sea.siemens.com/modproplus

Reliable Products From TheTechnology LeaderTechnology Enabling Reliability.When it comes to ready availability,easy installation, and fewer callbacks,you need a manufacturer you cantrust. Our products and systems areengineered to take on the mostdemanding conditions, alwaysavailable day after day. Combinedwith a world-class service andmaintenance network, completesupport is always there, 24/7.RESIDENTIAL1 Load Centers2 Meter Centers3 Safety Switches4 Disconnect Switches5 Enclosed Circuit Breakers6 Circuit Breakers7 TransformersFor product offerings seeSections 1 – 68 Power Monitoring9 TVSS10 PanelboardsCOMMERCIAL11 Lighting Controls12 SwitchboardsFor product offerings seeSections 2 – 1413 Switchgear14 Busway Systems15 Motor Control CentersINDUSTRIAL16 Control Products17 Standby GeneratorsFor product offerings seeSections 3 – 1618 Technical19 Product IndexDetailed Table of Contentslocated at beginning of each sectionYour single point of contact for general inquiries, customer service, sales office information, and product inquiries:Siemens 24/7 Call Center: 1-800-964-4114 / Email: info.sea@siemens.com / Internet: www.sea.siemens.com

ImportantThese instructions do not purport to cover all details or variations in equipment, nor to provide for every possiblecontingency to be met in connection with installation, operation or maintenance. Should further information bedesired or should particular problems arise which are not covered sufficiently for the purchaser's purpose, thematter should be referred to the local Siemens sales office. The contents of this catalog shall not become part ofor modify any prior or existing agreement, commitment or relationship. The sales contract contains the entireobligation of Siemens. The warranty contained in the contract between the parties is the sole warranty ofSiemens. Any statements contained herein do not create new warranties or modify the existing warranty.

1SPEEDFAX TM 2007-2008 Load Centers & Circuit BreakersContentsEQ ® and Ultimate Limited Warranty Program 1-2EQ ® and Ultimate Series Connected System 1-3Ultimate Load Center Features 1-4Ultimate Load Center Product Offering 1-5EQ ® and Ultimate Catalog Numbering System 1-6Load CentersThe Ultimate Load Centers 1-7Value Pack Load Centers 1-8EQ Small Circuit Load Centers 1-9EQ Circuit Breaker Enclosures 1-10EQ 3-Phase Load Centers 1-11EQ High Ampere (300–400) Load Centers 1-12Special Application Load Centers 1-13Riser Panel Load Centers 1-14Air Conditioning Disconnects 1-15OEM and Replacement Interiors 1-16Ultimate MB Load Center Wiring Diagrams 1-17Ultimate ML Load Center Wiring Diagrams 1-18EQ 3-Phase Load Center Wiring Diagrams 1-19EQ High Ampere Load Center Wiring Diagrams 1-20Ultimate Load Center Knockout Diagrams 1-21EQ Load Center Outdoor Knockout Diagrams 1-22EQ Load Center Indoor Knockout Diagrams 1-23Circuit BreakersType QP, 1" Breakers 1-24Type QT, 1/2" Breakers 1-25Arc Fault and Ground Fault Breakers 1-26Special Application Breakers 1-27Type QD, 3/4" Breakers 1-28Main and Branch Circuit Breakers 1-29Circuit Breaker Dimension Drawings 1-30Circuit Breaker Lug Data 1-31Surge Protection Products 1-32 – 1-34Load Center and Circuit Breaker Accessories 1-35 – 1-36All-Sites Temporary Power Outlet Panels 1-37 – 1-38Temporary Power Outlet Panels, Dimension Drawings 1-39 – 1-451LOAD CENTERS &CIRCUIT BREAKERSResidential Commercial Industrial

1LOAD CENTERS &CIRCUIT BREAKERSEQ ® and Ultimate Load CentersLimited Warranty ProgramSiemens Residential Circuit Breaker And Load Center Limited Warranty ProgramI. Lifetime Limited Warranty onBranch Circuit Breakers (15-225A)Siemens warrants its type QP, QPH,QPP, QT (twin), and HQP branch circuitbreakers to be free from defects inmaterial and workmanship under normalcare and proper usage in a domesticresidential installation, for the lifetime ofthe Siemens load center in which it isinstalled. If the circuit breaker fails withinthe warranty period because of a defectin material or workmanship, Siemens willreplace the inoperative breaker free ofcharge upon return to place of purchase.II. Ten Year Limited Warranty onEQ and Ultimate Load Centers(100-225A)Siemens warrants its type EQ andUltimate factory installed main breakerand main lug single phase load centers,when used with Siemens circuit breakersdescribed in item I, above, to be freefrom defects in material andworkmanship under normal care andproper usage in a domestic residentialinstallation, for a period of 10 years fromthe date of installation. If the load centerfails within the warranty period becauseof a defect in material or workmanship,Siemens will, at its option, repair orreplace the inoperative part or partsupon return to the place of purchase.III. This warranty applies to theitems described in I. and II. above,which were purchased and installedafter February 1, 1994.IV. Additional InformationNotice requirements and limitationsapplicable to Siemens warranties are:A. Siemens must be given promptnotice of any defect or failure of anyproduct covered by the warranty. Noticemust be accompanied by verification ofdate of purchase or installation.B. Any product authorized for return bySiemens, or its authorized distributors,under this warranty must be sent freightcosts prepaid. Siemens will deliverrepaired or replaced products to the buyer,freight costs prepaid. Repaired or replacedproducts shall be warranted for theunexpired portion of the warranty period.C. Any warranties granted or liabilitiesassumed hereunder will not apply toproducts that have been damaged,altered, repaired or operated otherwisethan in conformity within therequirements for safe operationand maintenance.The AbsoluteConfidence Warranty GeneralD. THERE ARE NO OTHERWARRANTIES WHICH EXTENDBEYOND THOSE EXPRESSLY SETFORTH HEREIN AND THIS WARRANTYAND SIEMENS’ OBLIGATIONS ANDLIABILITIES HEREUNDER ARE IN LIEUOF, AND SIEMENS DISCLAIMS ALLOTHER WARRANTIES ANDGUARANTEES AND ALL OTHERLIABILITIES THEREFORE EXPRESSOR IMPLIED, ARISING BY LAW OROTHERWISE, INCLUDING WITHOUTLIMITATION ANY IMPLIED WARRANTYOF MERCHANTABILITY OR OF FITNESSFOR A PARTICULAR PURPOSE. IN NOEVENT WILL SIEMENS BE LIABLE FORANY OTHER DAMAGES, EITHERDIRECT, INCIDENTAL,CONSEQUENTIALOR OTHERWISE.E. With respect to products purchasedby consumers of the United States forpersonal use, the implied warranties,including but not limited to the warrantiesof merchantability and of fitness for aparticular purpose, are not excludedbut are limited to the duration of theapplicable warranty period. Some statesdo not allow limitations on the durationof an implied warranty, so the abovelimitation may not apply to buyer.Similarly, some states do not allow theexclusion or limitation of incidental orconsequential damages, so the aboveexclusion or limitation may not apply tobuyer. This warranty gives buyer specificlegal rights, and buyer may also haveother rights which may very from stateto state.F. This Warranty covers domesticresidential use of Siemens productsdescribed in I. and II. above and excludesany commercial applications.1-2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

EQ ® and Ultimate Load CentersSeries-Connected SystemHow Series-Connected CircuitBreakers Save Component CostThe National Electrical Code states inarticle 110.9:110.9 Interrupting Rating. Equipmentintended to break current at fault levelsshall have an interrupting rating sufficientfor the system voltage and the currentwhich is available at the line terminalsof the equipment.Equipment intended to break currentat other than fault levels shall have aninterrupting rating at system voltagesufficient for the current that mustbe interrupted.There are two ways to satisfy this Coderequirement. Either method offers thenecessary protection but method two isa less costly alternative to method one.Method one is to select circuit breakerswith individual interrupting ratings equalto or greater than the available faultcurrent at the service entrance.Method two is to select circuit breakerswith a series combination rating equal toor greater than the available fault currentat the service entrance.Single Family HomesIn single family homes, the availablefault current normally does not exceed10,000 amperes. In this situation aload center with a main and branchbreakers with interrupting ratings of10kA, RMS symmetrical will satisfythis Code requirement.In some instances the available faultcurrent may exceed 10,000 amperesbut rarely will it exceed 22,000 amperes.In these instances a load center with amain circuit breaker with an interruptingrating of 22kA RMS symmetrical wouldbe required. The branch breakers inmethod one would be required to befully rated 22kA breakers while inmethod two the branch breakerscould be 10kA breakers.Apartments, Condominiums,CommercialIn larger installations the available faultcurrent will normally be above 10,000amperes so series combination ratingsbecome much more important. In theseinstallations it is not uncommon tosee three breaker series combinations.An example would be 65kA availablewith an 800 amp service disconnect(MD6 rated 65kA) ahead of a 125 ampfeeder disconnect (QPH rated 22kA)ahead of branch breakers in the loadcenter (QP rated 10kA).Series ratings are a part of the ratingand marking of the equipment in whichthe downstream breakers are installed.Section 240.86 of the NEC requires thismarking to be on the equipment and theonly acceptable combinations in a givendevice are those combinations markedon the device.General1LOAD CENTERS &CIRCUIT BREAKERSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-3

Ultimate Load CentersFeatures1LOAD CENTERS &CIRCUIT BREAKERSThe Siemens Ultimate Load Center is the highest quality, mostfeature rich design in the industry. Features of the Ultimate LoadCenter include:1. The patented INSTA-WIRE neutral / ground system allowsfor faster installation because the screws arrive backed out,ready for wire insertion.2. The patented Visible neutral / ground system aids in theinsertion of conductors.3. All main lug devices are provided with a factory installedground bar.4. Main lug and main breaker panels are provided with splitneutrals which can be isolated by removing a tie strap,turning one side into a ground bar.5. Inboard neutrals allow the installation of neutral and groundconductors right next to the breaker.6. Mounting tabs on the trim hold it in place on the load center,freeing up both hands to drive the trim screws.7. Combination head screws on the neutrals, grounds, trim,upper pan, and bond screw provide installation flexibility.8. The patented pre-positioned bond screw eliminates bondstrap / screw assemblies, and reduces the risk of losingcomponents in the field.9. All devices are convertible from main lug to main breaker orvice versa with the addition of main breaker or main lug kits.10. All main breakers are straight in wired – no back feedingrequired.11. A rigid, sturdy base pan provides the ruggedness requiredthe most harsh applications.12. The outdoor enclosure has a slide hinge door for the easiestof installation and can be removed by backing out only onescrew.13. All indoor Ultimate Load Centers are invertible for bottomfeed applications.14. Indoor load center trims are now available in white.45127 89361011 12131-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Ultimate Load CentersProduct Offering1The Ultimate Load Center product line provides a wide array of variation to meet any application need.LOAD CENTERS &CIRCUIT BREAKERSThe following offereing is available in the Ultimateproduct line:▪ 12-42 Circuits / Spaces▪ Indoor and outdoor enclosures▪ 100 to 225 Amp▪ Main lug and main breaker▪ Two different main lug configurations (see below)▪ Gray or white trim colors▪ Value packs – a mix of branch breakers providedwith the load centerOther load centers outside the Ultimate product lineinclude:▪ Circuit breaker enclosures▪ Small circuit (2-10) load centers▪ Riser panels for high rise applications▪ 3-Phase load centers▪ High amp load centers (400A)▪ Specialty load centers (generator standby panels,spa panels, renovation panels, and trailer panels)Main Breaker PanelStandard main lug panel withtwo split neutrals and a factorybonded ground bar (far left)“SG” style main lug panel withan isolated neutral (right) andfactory bonded ground bar (left)Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog1-5

1LOAD CENTERS &CIRCUIT BREAKERSEQ ® and Ultimate Load CentersCatalog Numbering SystemCatalog Numbering SystemType Enclosure or ComponentE = Indoor Type 1 2-10 and 30-42 circuits 300-400AmpG = Indoor Type 1 12-42 circuitsW = Outdoor Type 3RI = InteriorR = RiserSpacesMaximum number of 1" breakersCircuitsMaximum number of circuitsType of MainML or L = Main LugMB or B = Main BreakerMC = ConvertibleSystem1 = 1-Phase, 3-Wire3 = 3-Phase, 3-Wire or3-Phase, 4-WireMain Ampere RatingEx:100 = 100 AmpsTrim/OthersBlank = CombinationS = SurfaceF = FlushT = Feed-Thru LugsG or GB = Ground Bar Factory InstalledType of Bus BarBlank = AluminumC or CU = CopperCP = Copper Bus, Value PackG 12 24 MB 1 100 S CU ReferenceProducts Shown In Sections 1 and 2Of This Speedfax Meet Or ExceedThe Following Standards.▪ UL50 — Electric Cabinets and Boxes▪ UL67 — Electric Panelboards▪ UL414 — Meter Sockets▪ UL486 — Wire Connectors▪ UL489 — Molded-Case Circuit Breakers▪ UL869 — Service Equipment▪ UL943 — Ground Fault interrupters(Class A — Personnel Protection)▪ Federal Specification W-P-115b —Panel Power Distribution▪ Federal Specification W-C-375B —Circuit Breakers▪ NEC▪ NEMA 250Underwriters’ Laboratories, Inc.Reference File Numbers:▪ EQ Meter Combinations (complying withEUSERC specifications) are Listed by ULunder file #E10703▪ Uni-Pak (complying with EUSERCspecifications) are Listed by UL underfile #E10703▪ Underground pull box (complying withEUSERC specifications) are Listed by ULunder file #E10703▪ Series Connected Circuit BreakerInformation is recognized by UL underfile #E10848(N)▪ Pushmatic Circuit Breakers are Listed byUL under file #E10848▪ EQ Load Centers, Uni-Pak andModular Metering are Listed by ULunder file #E10703▪ EQ Load Centers, Uni-Pak and ModularMetering Accessories are UL recognizedcomponents found under file #E10703,Volume 6 and 7. (Also referenced underthe recognized components directory —section QEUY2)▪ EQ Circuit Breakers are Listed by ULunder file #E82615▪ Modular metering disconnects areListed by UL under file #E25506▪ EQ Main Lug Load Centers (wherenoted) and accessories are Certified byCSA under file #LL859001-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

The Ultimate Load CentersSingle Phase Main Lug and Main Breaker Load CentersMain Breaker/Convertible Load Centers SelectionAluminum or Copper Bus12-42 Circuits / 100-225 Amperes 60/75°C Rated 22,000A IR Branch Circuits Indoor Enclosure — NEMA Type 1 Outdoor Enclosure — NEMA Type 3RMain Enclosure EnclosureAmpere Max No. of 1-Pole Max. Aluminum Bus List Copper Bus List Height Copper Bus List HeightRating Spaces Circuits 2-Pole Catalog Number Price $ Catalog Number Price $ (inches) Catalog Number Price $ (inches) 1-Phase, 3-Wire SN100 12 24 6 G1224B1100 463.00 G1224B1100CU 499.00 18 W1224B1100CU 602.00 21100 16 24 8 G1624B1100 499.00 G1624B1100CU 546.00 21 W1624B1100CU 616.00 23100 20 20 10 G2020B1100 520.00 G2020B1100CU 581.00 24 W2020B1100CU 642.00 29100 24 24 12 — — G2424B1100CU 668.00 24 — — —100 30 30 14 — — G3030B1100CU 733.00 30 — — —125 24 24 12 G2424B1125 NEW 627.00 — — — — — —150 16 30 8 G1630B1150 863.00 — — 24 — — —150 20 30 10 G2030B1150 946.00 G2030B1150CU 1007.00 30 — — —150 24 30 12 G2430B1150 986.00 — — 30 — — —150 30 30 14 G3030B1150 1016.00 G3030B1150CU 1093.00 36 — — —200 8 16 4 — — — — — W0816B1200CT 925.00 27200 20 40 10 G2040B1200 946.00 G2040B1200CU 1007.00 30 W2040B1200CU 1076.00 29200 24 40 12 G2440B1200 1004.00 — — 30 — — —200 30 40 14 G3040B1200 1149.00 G3040B1200CU 1223.00 36 W3040B1200CU 1366.00 35200 40 40 20 G4040B1200 1308.00 G4040B1200CU 1429.00 39 W4040B1200CU 1534.00 38225 42 42 21 — — G4242B1225CU 1697.00 42 W4242B1225CU 1793.00 42Single phase factory installed 22kA IR main circuit breaker offers 22/10kA IR series combination rating when using 10kA IR Type QP, QT, QPF, QE, QN and QAF branch breakers.1LOAD CENTERS &CIRCUIT BREAKERSMain Lug/Convertible Load Centers Aluminum or Copper Bus 12-42 Circuits / 125-225 Amperes 60/75°C Rated 100,000A IRBranch Circuits Indoor Enclosure — NEMA Type 1 Outdoor Enclosure — NEMA Type 3RMain Enclosure EnclosureAmpere Max No. of 1-Pole Max. Aluminum Bus List Copper Bus List Height Copper Bus List HeightRating Spaces Circuits 2-Pole Catalog Number Price $ Catalog Number Price $ (inches) Catalog Number Price $ (inches) 1-Phase, 3-Wire SN125 12 12 6 G1212L1125 194.00 G1212L1125CU 230.00 21 W1212L1125CU 302.00 21125 12 24 6 G1224L1125 253.00 G1224L1125CU 290.00 21 W1224L1125CU 379.00 21125 16 24 8 G1624L1125 309.00 G1624L1125CU 358.00 21 W1624L1125CU 463.00 23125 20 20 10 G2020L1125 361.00 G2020L1125CU 424.00 24 — — —125 24 24 12 G2424L1125 410.00 — — 30 W2424L1125CU NEW 560.00 27125 24 40 12 — — G2440L1125CU 470.00 30 — — —125 30 40 14 — — G3040L1125CU 534.00 30 W3040L1125CU 685.00 35125 40 40 20 — — G4040L1125CU NEW — 39 — — —150 20 30 10 G2030L1150 437.00 G2030L1150CU 486.00 30 W2030L1150CU 595.00 29200 8 16 4 — — — — — W0816L1200CT 494.00 27200 12 24 6 — — G1224L1200CU 424.00 24 W1224L1200CU 518.00 27200 20 40 10 G2040L1200 532.00 G2040L1200CU 591.00 30 W2040L1200CU 705.00 29200 24 40 12 G2440L1200 563.00 G2440L1200CU 624.00 30 — — —200 30 30 14 G3030L1200 545.00 G3030L1200CU 627.00 36 — — —200 30 40 14 G3040L1200 605.00 G3040L1200CU 681.00 36 W3040L1200CU 778.00 35200 40 40 20 G4040L1200 905.00 G4040L1200CU 1004.00 39 W4040L1200CU 1086.00 38225 12 24 6 — — — — — W1224L1225CU NEW 685.00 29225 42 42 21 — — G4242L1225CU 1029.00 42 W4242L1225CU 1411.00 42SG Series Main Lug/Convertible Load Centers Aluminum or Copper Bus12-40 Circuits / 125-200 Amperes 60/75°C Rated 100,000A IR Branch Circuits Indoor Enclosure — NEMA Type 1MainEnclosureAmpere Max No. of 1-Pole Max. Copper Bus List HeightRating Spaces Circuits 2-Pole Catalog Number Price $ (inches) 1-Phase, 3-Wire SN125 12 24 6 G1224L1125CUSG 290.00 21125 16 24 8 G1624L1125CUSG 358.00 24125 20 30 10 G2030L1125CUSG 424.00 24125 24 30 12 G2430L1125CUSG 433.00 30150 20 30 10 G2030L1150CUSG 486.00 30200 30 40 14 G3040L1200CUSG 681.00 36200 40 40 20 G4040L1200CUSG 1004.00 39 Suitable for use as service entrance equipment. May be installed on higher rated systems whenprotected by a circuit breaker with a higher AIR rating.See equipment markings. Indoor enclosures are 14 5/16" wide by 3 15/16" deep. Outdoor enclosures are 14 1/2" wide by 4 1/4" deep. 125A load centers will accept MBK100A and MBK125A150A load centers will accept MBK150A200A load centers will accept MBK150A and MBK200A225A load centers will accept MBK150A, MBK200A, andMBK225A. Suitable for use as service entrance equipment when notmore than six main disconnecting means are providedand when not used as a lighting and appliance branchcircuit panelboard. See article 408.14 of the NEC ® . Factory installed 100% neutral with factory bonded100% ground. No neutral tie strap. All 225 amp load centers are provided with tin platedcopper bus bars. Copper bus load centers are recommended for thoseapplications where the environment may be severe (i.e.farm and coastal areas). NEW Adding a “W” to the end of the load center catalognumber (example: G3040L1200CUW) will change the trimcolor to white. Slight price increase as well as a 2-3 weeklead time required. Pallet quantities only.Discount Schedule RESI Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-7

1LOAD CENTERS &CIRCUIT BREAKERSThe Ultimate Load CentersValue Pack Load Centers SelectionValue pack load centers offer a standard load center and an assortment of branch breakers . The offering of value packs and the breakersincluded are listed in the table below.Catalog Number Load Center Breakers Included List Price $G2020B1100CP G2020B1100CU (6) Q120 659.00G3030B1100CP NEW G3030B1100CU (6) Q120, (6) Q115 900.00G1224L1125CP NEW G1224L1125CU (6) Q120 432.00G1624L1125CP G1624L1125CU (6) Q120 468.00G3030B1150CP NEW G3030B1150CU (6) Q120, (1) Q230, (1) Q250 1323.00G3040B1200CP G3040B1200CU (6) Q120, (1) Q230, (1) Q250 1415.00G3040B1200CPP NEW G3040B1200CU (6) Q120, (1) Q230, (1) Q240 1415.00G3040L1200CP G3040L1200CU (6) Q120, (1) Q230, (1) Q250 928.00G3040L1200CPP G3040L1200CU (6) Q120, (1) Q230, (1) Q240 964.00G3040L1200CP1 NEW G3040L1200CU (6) Q120, (6) Q115, (1) Q230, (1) Q250 1061.00G4040B1200CP G4040B1200CU (6) Q120, (1) Q230, (1) Q250 1631.00G4040B1200CPP NEW G4040B1200CU (6) Q120, (1) Q230, (1) Q240 1429.00G4040B1200CP1 NEW G4040B1200CU (6) Q115, (6) Q120, (1) Q230, (1) Q250 1759.00G4040B1200CUSGP G4040L1200CUSG MBK200A , (6) Q120, (1) Q230, (1) Q250 1698.00G4040L1200CPP G4040L1200CU (6) Q120, (1) Q230, (1) Q240 1004.00W3040B1200CP NEW W3040B1200CU (6) Q120, (6) Q115, (1) Q230, (1) Q250 1613.00W3040L1200CP NEW W3040L1200CU (6) Q120, (6) Q115, (1) Q230, (1) Q250 1025.00W4040B1200CP NEW W4040B1200CU (6) Q120, (6) Q115, (1) Q230, (1) Q250 1780.00W4040L1200CP W4040L1200CU (6) Q120, (1) Q230, (1) Q250 1331.00Ultimate Load Center Accessories Catalog Number Description List Price $ Pack Qty.ECHS000 Hub cover plate 38.00 1ECHS075 3⁄4" Hub 39.50 1ECHS100 1" Hub 39.50 1ECHS125 1 1 ⁄4" Hub 39.50 1ECHS150 1 1 ⁄2" Hub 39.50 1ECHS200 2" Hub 69.00 1ECHS250 2 1 ⁄2" Hub 109.00 1ECGB5 5 pos ground bar 18.40 1ECGB10 10 pos ground bar 21.00 1MBK100A 100A main breaker kit 230.00 1MBK125A 125A main breaker kit 473.00 1MBK150A 150A main breaker kit 588.00 1MBK200A 200A main breaker kit 588.00 1MBK225A 225A main breaker kit 588.00 1ECLKB1 2/0 lug kit with bonding means for Ultimate load centers 26.50 1ECLK1-2 #2-1/0 neutral lug 13.90 1ECLK2 #4-2/0 neutral lug 18.40 1ECQFL2 Door lock 89.00 1ECCP1 Directory cards 616.00 100ECTS2 Trim screws 9.80 6ECQF3 Filler plates 14.20 5Notes: MBK200A factory installed. All value packs provided with copper bus bars. Breakers are shipped inside a sleeve located in the loadcenter. “New” items to be available Spring 2007. See accessory pages at end of section for completeaccessory listing.Ultimate Load Center Lug DataTerminals Wire TorqueA, B, N 300 kcmil-4 AWG 275 lb.-ins.A, B, N, G 2/0-4 AWG 110 lb.-ins.Neutral-Ground Bars 10–14 Cu/10–12 Al 20 lb.-ins.(Use Type GB Ground Bar 8 AWG 25 lb.-ins.Accessory Kit) 6–4 AWG 35 lb.-ins.Ground Conductors Only(2) or (3) 14 AWG 20 lb.-ins.(2) 12–10 AWG 20 lb.-ins.Main Lug/Main Breaker toBus Connection (1/4-20 nut)45 lb.-ins.Bonding Screw45 lb.-ins. 150, 200 & 225 amp load centers. 100 & 125 amp load centers. MBK100A only for use on 100 or 125A load centers /MBK125A only for use on 125A load centers /MBK150A only for use on 150A, 200 or 225A load centers/ MBK200A only for use on 200 or 225A load centers/ MBK225A only for use on 225A load centers. ECLKB1 installed on left side neutral bar when the tiestrap is removed. A tang is provided allowing that lugand neutral assembly to be bonded to the enclosure.1-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

EQ ® Load CentersSmall Circuit Load Centers100,000A IR4–16 circuits, 100–125 Amperes1-Phase, 3-Wire, SN 120/240 Volts ACFeatures/ApplicationsEQ Load Centers with main lugs feature a combination trim box in one package.▪ Interiors offer removal in seconds▪ Single phase▪ One piece bus bar construction designedfor use only with circuit breakers▪ UL Listed▪ UL listed on 60/75°C conductors(see equipment markings for applications)▪ Positive load side circuit breaker hook rails▪ Outdoor Type 3R devices use HS TypehubsE0408ML1125(F,S)Selection/Wiring DiagramsE0816ML1125(F,S)CU1LOAD CENTERS &CIRCUIT BREAKERSMain Lugs with Aluminum Bus Branch Circuits Indoor Enclosure — NEMA Type 1 Outdoor Enclosure — NEMA Type 3RMax.Catalog Number—1-Pole QP Replace Suffix F Dimensions DimensionsAmp No. of No. of Max. (Flush) with S for List Std. (inches) Catalog List Std. (inches)Rating Spaces Circuits 2-Poles Surface Mounting Price $ Pkg. H W D Number Price $ Pkg. H W D100 12 24 6 E1224ML1100FG 261.00 1 14 3/4 12 3/8 3 7/8 — — — — — —125 4 8 2 E0408ML1125F 81.00 5 12 5/8 6 5/8 3 1/2 W0408ML1125 150.00 5 12 1/4 6 4 1/4125 4 8 2 — — — — — — W0408L1125SPA50 600.00 1 12 1/4 6 4 1/4125 4 8 2 — — — — — — W0408L1125SPA60 630.00 1 12 1/4 6 4 1/4125 8 16 4 E0816ML1125F 145.00 1 14 3/4 12 3/8 3 7/8 — — — — — —Main Lug and Main Breaker with Copper Bus 100,000A IR4–16 circuits, 100–225 Amperes1-Phase, 3-Wire, SN 120/240 Volts ACFeaturesBranch Circuits Indoor Enclosure — NEMA Type 1 Outdoor Enclosure — NEMA Type 3RMax.1-Pole QP Dimensions DimensionsAmp No. of No. of Max. Catalog List Std. (inches) Catalog List Std. (inches)Rating Spaces Circuits 2-Poles Number Price $ Pkg. H W D Number Price $ Pkg. H W D100 10 20 4 E1020MB1100FCGP 494.00 1 14 3/4 12 3/8 3 7/8 — — — — — —100 12 24 6 E1224ML1100FCU 265.00 1 14 3/4 12 3/8 3 7/8 — — — — — —125 8 16 4 E0816ML1125FCU 158.00 1 14 3/4 12 3/8 3 7/8 W0816ML1125CU 264.00 1 14 3/4 12 1/8 4 1/4125 8 16 4 E0816ML1125SCU 154.00 1 14 3/4 12 3/8 3 7/8 — — — — — —225 4 6 2 — — 1 — — — W0406ML1225CU 396.00 1 23 10 4 1/8200 4 4 2 — — 1 — — — W0404MB1200CT 823.00 1 20 11 1/8 4 3/4Wiring DiagramsE0408ML1125W0408ML11258-Poles Max.E0816ML1125W0816ML1125CU16-Poles Max.E1224ML1100FG24-Poles Max. 70 amp maximum breaker. Will not accommodate 2-pole GFCI or circuit breaker withshunt trip. Suitable for use as service equipment when a main breaker(100A maximum) is back-fed in a branch position and usedwith main breaker retainer clip (Cat. No. ECMBR1). 100 amp maximum breaker. Suitable for use as service entrance equipment when a mainbreaker (125A maximum) is back-fed in a branch position andused with main breaker retainer clip (Cat. No. ECMBR1). Suitable for use as service entrance when not more than sixmain disconnecting means are provided, and when not used aslighting and appliance branch circuit panelboard. Check localcodes and restrictions. Two Q115 and one Q230 breaker included. W0408L1125SPA50 provided with factory installed QF50 andground bar. W0408L1125SPA60 provided with factory installedQF260 and ground bar. Copper Bus load centers are recommended for thoseapplications where the environment may be severe(i.e. farm and coastal areas). 2" HS Type hub provided. Type QNR main breaker factory installed.Discount Schedule RESI Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-9

EQ ® Load CentersCircuit Breakers EnclosuresSelection/Wiring Diagrams1LOAD CENTERS &CIRCUIT BREAKERSFeatures▪ Circuit breaker enclosures range from 60A to225A, indoor and outdoor models▪ Designed for use exclusively with QP, QT,QPH, HQP, BQ, BQH, HBQ, QPP, QPPH,HQPP, QJ2, QJH2 and QJ2-H circuit breakers▪ UL listed▪ Suitable for use as service entranceequipment▪ UL listed for 60/75°C conductors(See equipment markings for applications)W0202MB1200CUE0303ML3100CUBreaker Used Indoor Enclosure — NEMA Type 1 Outdoor Enclosure — NEMA Type 3RFrame Ampere No. of Catalog List Std. Dimensions (inches) Catalog List Std. Dimensions (inches)Type Rating Poles Number Price $ Pkg. Height Width Depth Number Price $ Pkg. Height Width Depth1-Phase, 3-Wire SN — 120/240 Volts AC60 2 E0204ML1060S 76.00 5 9 7/8 5 1/8 2 5/8 W0204ML1060 141.00 5 18 15 4 1/4QP, QPH, 60 2 E0204ML1060F 116.00 5 9 7/8 5 1/8 2 5/8 — — — — — —HQP 100 2 E0202MB1100 NEW 306.00 1 17 1/8 7 3/8 4 5/16 W0202MB1100CU 364.00 1 17.4 7.3 4.3125 E0204ML1125SCU 121.00 1 17 1/8 7 1/8 4 1/4 W0204ML1125CU 189.00 1 17 1/8 17 3/8 4 5/16QN, QNH, 200 2 — — — — — — W0202ML1200CU 468.00 1 19 3/4 18.4 4.6HQN 200 2 E0202MB1200 NEW 718.00 — 19 3/8 8 1/2 4 W0202MB1200CU 902.00 1 19 3/4 18.4 4.6QPP, QPPH,HQPP, QP225 1-4 — — — — — — W0406ML1225CU 396.00 1 23 10 4 1/8QJ2, 150 2 — — — — — — WB2150B 949.00 1 27 17 3/8 4 15/16QJH2, 200 2 — — — — — — WB2200B 949.00 1 27 17 3/8 4 15/16QJ2-H 225 2 — — — — — — WB2225 418.00 1 27 17 3/8 4 5/163-Phase, 3-Wire 240 Volts AC or 3-Phase, 4-Wire SN — 120/208 Volts AC, 120/240, 240 Volts ACQP, QPH,HQP 100 2-3 E0303ML3100S 189.00 1 17 1/8 7 1/8 4 1/4 W0303ML3100 249.00 1 17 1/8 17 3/8 4 5/16BQ, BQH, HBQ 100 2-3 EB3100S 189.00 1 17 1/8 7 1/8 4 1/4 WB3100 249.00 1 17 1/8 17 3/8 4 5/16QJ2, QJH2,225 2-3 EB3225F 226.00 1 27111 10 1/8 5 1/8 WB3225 459.00 1 27 10 1/8 5 9/16QJ2-H Will not accommodate 2-pole GFCI or circuit breaker withshunt trip. 42,000A IR maximum. Copper wire only at 225A. Will not accommodate GFCI or circuit breaker with shunttrip. Main breaker factory installed. QJ2 frame circuit breaker installed, rated 10,000A IR.Wiring Diagrams1-Phase, 3-Wire3-Phase, 4-WireE0303ML3100CUEB3100W0303ML3100CUWB3100EB3225WB32252 or 3-PoleE0204ML1060W0204ML10601 or 2-PolesE0204ML1125FCUW0204ML1125CU1 or 2-PolesWB2225One 2-PoleW0406ML1225CU1 or 2-Poles1-10Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

EQ ® Load Centers3-Phase Main Breaker with Copper Bus 10,000A IR 30–42 Circuits, 100–225 Amperes3-Phase, 3-Wire, 240 Volt AC — or — 3-Phase, 4-Wire120/240 – or – 120/208 Volts ACSelection1LOAD CENTERS &CIRCUIT BREAKERSG3042B3200CUW3042L3200CUBranch Circuits Indoor Enclosure — NEMA Type 1 Outdoor Enclosure — NEMA Type 3RMax. Dimensions DimensionsAmpere 1-Pole No. No. of Max. Catalog List (inches) Catalog List (inches)Rating of Spaces Circuits 2-Poles Number Prices $ Height Width Depth Number Prices $ Height Width Depth100 30 30 14 G3030B3100CU 1288.00 30 14 3/8 3 15/16 — — — — —150 24 42 14 G2442B3150CU 2112.00 36 14 3/8 3 15/16 W2442B3150CU 2301.00 34 14 1/4 4 1/2200 30 42 14 G3042B3200CU 2209.00 36 14 3/8 3 15/16 W3042B3200CU 2393.00 37 14 1/4 4 1/2200 42 42 20 G4242B3200CU 2326.00 42 14 3/8 3 15/16 W4242B3200CU 2639.00 43 14 1/4 4 1/2225 42 42 20 G4242B3225CU 2326.00 42 14 3/8 3 15/16 W4242B3225CU 2639.00 43 14 1/4 4 1/2 May be installed on higher rated systems when protectedby a circuit breaker with a higher A IR rating.See equipment markings. Back-fed main breaker.When 22,000 IR or 42,000 IR main circuit breakers arerequired, add the suffix “-22” or “-42” respectively.List price adder applies. Standard Package Quality = 1. Copper bus load centers are recommended for thoseapplications where the environment may be severe(i.e. farm and coastal areas) or where a premiumpanel is desired.3-Phase Main Lug with Copper Bus 100,000A IR12–42 circuits, 125–225 Amperes3-Phase, 3-Wire, 240 Volt AC — or — 3-Phase, 4-Wire SN120/240 – or – 120/208 Volts ACBranch Circuits Indoor Enclosure — NEMA Type 1 Outdoor Enclosure — NEMA Type 3RMax. Dimensions DimensionsAmp 1-Pole No. No. of Max. Catalog List (inches) Catalog List (inches)Rating of Spaces Circuits 2-Poles Number Price $ Height Width Depth Number Price $ Height Width Depth125 12 24 6 G1224L3125CU 390.00 21 14 3/8 3 15/16 W1224L3125CU 532.00 21 — —150 18 36 9 G1836L3150CU 537.00 24 14 3/8 3 15/16 W1836L3150CU 685.00 25 14 1/4 4 1/2150 24 42 12 G2442L3150CU 648.00 30 14 3/8 3 15/16 W2442L3150CU 859.00 28 14 1/4 4 1/2200 12 24 6 G1224L3200CU 520.00 24 14 3/8 3 15/16 W1224L3200CU 666.00 22 14 1/4 4 1/2200 18 36 8 G1836L3200CU 621.00 30 14 3/8 3 15/16 — — — — —200 24 42 12 G2442L3200CU 720.00 30 14 3/8 3 15/16 W2442L3200CU 859.00 31 14 1/4 4 1/2200 30 42 14 G3042L3200CU 767.00 36 14 3/8 3 15/16 W3042L3200CU 909.00 34 14 1/4 4 1/2225 42 42 20 G4242L3225CU 977.00 42 14 3/8 3 15/16 W4242L3225CU 1612.00 42 14 1/4 4 1/2 Suitable for use as service equipment when not morethan six main disconnecting means are provided andwhen not used as a lighting and appliance branch circuitpanelboard. See article 408 of the NEC. Suitable for use as service equipment when a mainbreaker (100A maximum) is back-fed in a branch position,and used with main breaker retainer clip (Cat. No. MBR-1). Standard Package Quantity = 1. Copper bus load centers are recommended for thoseapplications where the environment may be severe(i.e. farm and coastal areas) or where a premiumpanel is desired.Lug Data3-Phase Load CentersTerminals Wire TorqueA, B, C See Marking on BreakerN 250 kcmil-4 AWG 340 lb.-ins.A, B, C & N 300 kcmil-6 AWG 340 lb.-ins.N 2/0-4 AWG 135 lb.-ins.G 2/0-4 AWG 45 lb.-ins.Branch BreakersSee Marking on BreakerType “LK” Subfeed Lug Kit See Marking on Lug Kit 150, 200 & 225 amp load centers. 100 & 125 amp load centers.Terminals Wire Torque14–10 AWG 20 lb.-ins.Neutral-Ground8 AWG 25 lb.-ins.(Use Type GB Ground Bar6 AWG 35 lb.-ins.Kit Accessory)4 AWG 45 lb.-ins.Ground Conductors Only (2) or (3) 14–10 AWG 20 lb.-ins.LK1-2 (Accessory) 2/0-2 AWG 45 lb.-ins.LK2 (Accessory) 2/0-4 AWG 135 lb.-ins.LK3 (Accessory) 300 kcmil-1 AWG 340 lb.-ins. Main lug load centers.Discount Schedule RESI Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-11

1LOAD CENTERS &CIRCUIT BREAKERSEQ ® Load CentersMain Breaker 300– 400 AmpereFeatures▪ UL listed for 60/75°C conductors.See equipment markings for applications.▪ Copper bus standard.▪ Factory installed lock on indoor enclosure.E3030MB1400SCUSelection1ø, 3-Wire120/240 Volts ACBranch Circuits Indoor Enclosure — NEMA Type 1 (22,000A IR) Outdoor Enclosure — NEMA Type 3R (22,000A IR) Type QPAmpere Max. Max. Catalog List Std. Dimensions (inches) Trim Catalog List Std. Dimensions (inches)Rating 1-Pole 2-Poles Number Price $ Pkg. Height Width Depth Style Number Price $ Pkg. Height Width Depth 300 42 20 E4242MB1300FCU 6263.00 1 58 20 6 Flush — — — — — —300 42 20 E4242MB1300SCU 6263.00 1 58 20 6 Surface — — — — — —400 30 14 E3030MB1400SCU 5751.00 1 52 20 6 Surface W3030MB1400CU 6800.00 1 52 20 6400 42 20 E4242MB1400FCU 6263.00 1 58 20 6 Flush W4242MB1400CU 7408.00 1 58 20 6400 42 20 E4242MB1400SCU 6263.00 1 58 20 6 Surface — — — — — —3ø, 3-Wire240 Volts AC — or — 3-Phase, 4-Wire SN, 120/208 Volts ACBranch Circuits Indoor Enclosure — NEMA Type 1 (22,000A IR) Outdoor Enclosure — NEMA Type 3R (22,000A IR) Type QPAmpere Max. Max. Catalog List Std. Dimensions (inches) Trim Catalog List Std. Dimensions (inches)Rating 1-Pole 2-Poles Number Price $ Pkg. Height Width Depth Style Number Price $ Pkg. Height Width Depth 300 42 20 E4242MB3300SCU 6601.00 1 58 20 6 Surface — — — — — —400 30 14 E3030MB3400SCU 5956.00 1 52 20 6 Surface — — — — — —400 42 20 E4242MB3400FCU 6601.00 1 58 20 6 Flush W4242MB3400CU 7672.00 1 58 20 6400 42 20 E4242MB3400SCU 6601.00 1 58 20 6 Surface — — — — — —Main Lug400 Ampere1ø, 3-Wire120/240 Volts ACBranch Circuits Indoor Enclosure — NEMA Type 1 (22,000A IR) Outdoor Enclosure — NEMA Type 3R (22,000A IR)Type QPAmpere Max. Max. Catalog List Std. Dimensions (inches) Trim Catalog List Std. Dimensions (inches)Rating 1-Pole 2-Poles Number Price $ Pkg. Height Width Depth Style Number Price $ Pkg. Height Width Depth400 24 12 — — — — — — — W0606ML1400CU 2275.00 1 43 20 6400 30 14 E3030ML1400SCU 1871.00 1 41 20 6 Surface W3030ML1400CU 2590.00 1 43 20 6400 42 20 E4242ML1400SCU 2066.00 1 47 20 6 Surface — — — — — —400 42 20 E4242ML1400FCU 2066.00 1 47 20 6 Flush W4242ML1400CU 2777.00 1 47 20 63ø, 3-Wire240 Volts AC — or — 3-Phase, 4-Wire SN, 120/208 Volts ACBranch Circuits Indoor Enclosure — NEMA Type 1 (22,000A IR) Outdoor Enclosure — NEMA Type 3R (22,000A IR) Type QPAmpere Max. Max. Catalog List Std. Dimensions (inches) Trim Catalog List Std. Dimensions (inches)Rating 1-Pole 2-Poles Number Price $ Pkg. Height Width Depth Style Number Price $ Pkg. Height Width Depth 400 30 14 E3030ML3400SCU 2050.00 1 41 20 6 Surface — — — — — —400 42 20 E4242ML3400FCU 2134.00 1 47 20 6 Flush W4242ML3400CU 2850.00 1 47 20 6400 42 20 E4242ML3400SCU 2134.00 1 47 20 6 Surface — — — — — — UL listed as suitable for use as service equipment. 65,000A IR on 600A. Where noted suffix S = Surface, F = Flush. Does not include 2" rainhead overhang. Accepts up to six QN style breakers. Suitable for use as service entrance equipment when notmore than six main disconnecting means are providedand when not used as a lighting and appliance panelboard.1-12Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Load CentersSpecial Application Load CentersSelectionStandby Power PanelsThese panels feature two back-fed mainbreakers that are mechanically interlockedto allow only one main breaker to be “on”at a time. Additional branch circuit spacesallow critical circuits to be controlledthrough this panel.Renovation PanelIdeal for older home renovation projectswhere the distance between the studs isnarrower than current construction practices.The narrower panel eliminates the need to‘notch’ out the existing studs.1LOAD CENTERS &CIRCUIT BREAKERSTrailer PanelsThese feed-through panels are UL listed asService Equipment and are ideal for servingmobile homes located on private lots. Thepanels either have factory or field added mainbreakers with subfeed lugs. Additional breakerpositions allow connection of external circuitssuch as lights, pumps, etc.Spa PanelsSpa Panels are ideal for outdoor applicationsrequiring the use of ground fault protection,such as hot tubs. A factory installed 2-PoleGFCI breaker is provided, along with 2extra circuits.Spa PanelsMain No. of Max. Dimensions ListAmp Spaces Circuits Catalog Number Height Width Depth Price $125 2 4 W0408L1125SPA50 12 1 ⁄4 16 1 ⁄8 4 1 ⁄4 600.00125 2 4 W0408L1125SPA60 12 1 ⁄4 16 1 ⁄8 4 1 ⁄4 630.00Renovation Panels - 3-Wire 120/240V ACMain No. of Max. Dimensions ListAmp Spaces Circuits Catalog Number Height Width Depth Price $100 10 20 E1020MB1100FCGP 14 3 ⁄4 12 3 ⁄8 3 7 ⁄8 494.00100 12 24 E1224ML1100FCU 14 3 ⁄4 12 3 ⁄8 3 7 ⁄8 265.00Standby Power Panels - 3-Wire 120/240V AC Utility Generator No. of Max. Indoor Type 1 Dimensions ListMain Main Spaces Circuits Catalog Number Height Width Depth Price $60 60 12 24 G1224B6060GC 21 14 3 ⁄8 4 758.00100 60 12 24 G1224B10060GC 21 14 3 ⁄8 4 945.00100 60 12 24 W1224B10060GC 21 14 3 ⁄8 4 1139.00Outdoor Trailer Panels - 120/240V AC 208Y/120V ACAmps No. of Max. Indoor Type 1 Dimensions ListMax Spaces Circuits Catalog Number Height Width Depth Main Breaker Price $200 4 8 W0404MB1200CT 20 11 1 ⁄8 4 3 ⁄4 QN2200R Factory 823.00200 8 16 W0816L1200CT 29 14 1 ⁄4 4 1 ⁄2 MBK Field 494.00200 8 16 W0816B1200CT 29 14 1 ⁄4 4 1 ⁄2 MBK200A Factory 925.00 HS hub provision provided. Closure plate included. Dimensions shown are representative of outside boxlength, width, and depth and do not include allowancesfor mounting bumps, endwalls, covers, hubs, or hardwareprotrusions. Dimensions are subject to change. For Main breaker applications, field - add an MBK150Aor MBK200A. W0404MB1200CT shipped with ECHS200 hub instead ofclosure plate. These branch breaker provisions are in addition to thetwo factory installed main breakers. Indoor Type 1 Enclosure. Outdoor Type 3R Enclosure. Two Q115 and one Q230 provided. 50 Amp, 2-pole GFCI breaker installed. 60 Amp, 2-pole GFCI breaker installed. 200A factory installed main breaker included. 100A factory installed main breaker included. ..........See NEW Standby Generator Section 17 for a completeline of manual transfer interlock kits which can convertmost load centers and meter combinations into standbypower panels.Discount Schedule RESISiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-13

1LOAD CENTERS &CIRCUIT BREAKERSEQ ® Load CentersRiser Panel Load CentersRiser Panel Load Centers are ideal for highrise applications. The shifted interiorprovides room for conductors to passthrough the load center . The tap kitsallow the installer to tap off from thoseconductors to power the panel. Features▪ UL Listed▪ Convertible from main lug to mainbreaker ▪ Easily removable interior▪ Copper bus barsThe Riser Gutter Tap Kit (ECRLK250)allows the installer to tap off of the mainconductors, eliminating the need to cutcompletely through the conductor. The tapkit accepts 250-1/0 on the main conductorside and 250-6 on the tap side. OneECRLK250 comes with 3 lug kits.SelectionThe Riser Gutter (RAG24) is used toconvert any load center 24" or larger into ariser panel.Features▪ UL Listed▪ Single and 3-phase applications▪ Compatible with any single or 3-phaseSiemens load center 24"or higher▪ Flush trim included▪ Load center mounting hardware and passthru bushing included▪ Catalog number — RAG24Trim/CoverRAG24R2040ML1125CUR2040ML1125CUDoor OnECRLK250Max 1-poleDimensionsAmp No. of No. of QP Max.Rating Spaces Circuits 2-Poles Catalog Number List Price $ H W D125 12 24 6 R1224ML1125CU 465.00 18 14 1 ⁄4 4125 20 40 10 R2040ML1125CU 550.00 24 14 1 ⁄4 4Notes:1. The riser panels are single phase only, but can be fedfrom single or 3-phase systems running through thegutter trough area.2. Tap lug kits not included.3. Use main breaker kit MBK125.4. Use ECGB series of ground bars for field grounds.1-14Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

AC Disconnects1-Phase, NEMA 3R RatedSelection1LOAD CENTERS &CIRCUIT BREAKERSWN2060 WN2060GFCI WF2060PLWNAS2060GFCISteel AC Disconnects Ampere Disconnect Horse Power Dimensions List PalletRating Type Catalog Number Rating Height Width Depth Price $ Qty.30 Fused Pullout WF2030 3 7 1 ⁄4 5 2 1 ⁄8 145.00 36060 Fused Pullout WF2060 10 9 5 2 1 ⁄8 145.00 36060 Non-fused Pullout WN2060 10 7 1 ⁄4 5 2 1 ⁄8 145.00 36060 Non-automatic Switch WNAS2060 10 7 1 ⁄4 5 2 1 ⁄8 173.00 360Plastic AC Disconnects Ampere Disconnect Horse Power Dimensions List PalletRating Type Catalog Number Rating Height Width Depth Price $ Qty.30 Fused Pullout WF2030PL 3 7 1 ⁄4 5 2 1 ⁄2 221.00 21660 Fused Pullout WF2060PL 10 7 1 ⁄4 5 2 1 ⁄2 221.00 21660 Non-fused Pullout WN2060PL 10 7 1 ⁄4 5 2 1 ⁄2 201.00 36060 NEW Non-Fused Pullout WN2060PLX 10 8 5 3 ⁄4 3 1 ⁄2 211.00 28860 NEW Non-automatic switch WNAS2060PL 10 7 1 ⁄4 5 2 1 ⁄2 201.00 360Steel AC Disconnects with 15 Amp GFCI Receptacle Ampere Disconnect Horse Power Dimensions List PalletRating Type Catalog Number Rating Height Width Depth Price $ Qty.30 Fused Pullout WF2030GFCI 3 9 6 1 ⁄8 5 3 ⁄16 471.00 11260 Fused Pullout WF2060GFCI 10 9 6 1 ⁄8 5 3 ⁄16 471.00 11260 Non-fused Pullout WN2060GFCI 10 7 1 ⁄8 5 3 ⁄4 5 3 ⁄16 436.00 14460 Non-automatic Switch WNAS2060GFCI 10 7 1 ⁄8 5 3 ⁄4 5 3 ⁄16 471.00 144Wire Range TableCopperAluminumConnector Solid Stranded Solid StrandedLine #14-8 #14-3 #12-8 #12-3Load #14-8 #14-3 #12-8 #12-3Neutral #12-8 #12-2 #12-8 #12-2Equip. Grnd #12-8 #12-2 #12-8 #12-2 Add a “BP” to the end of the catalog number to order inpallet quantites, example: WN2060BP. Accepts Class H FuseDiscount Schedule RESI Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-15

Load CentersLoad Center replacement and OEM InteriorsSelection1LOAD CENTERS &CIRCUIT BREAKERS1ø: Small Circuit Main Lug InteriorsDimensions ListAmps Catalog Number Spaces Circuits Height Width Price $60 I0204ML1125 2 2 5.06 2.12 31.5060 I0303ML3100 3 3 5.06 3.12 59.00125 I0408ML1125 4 8 4.51 6.61 57.00125 I0816ML1125CU 8 16 6.19 6.81 109.00125 I0816ML1125CUSP 8 16 6.19 6.81 109.00200 I0202L1200 4 4 3.88 7.13 67.00200 I1220L1200CT 12 20 9.00 7.00 165.00Ultimate 1ø: High Circuit Main Lug Interiors with Neutral Bars Dimensions ListAmps Catalog Number Spaces Circuits Height Width Price $125 I1224L1125CU 12 24 10.80 9.80 132.00125 I1624L1125CU 16 24 12.80 9.80 154.00125 I3040L1125CU 30 40 20.80 9.80 198.00200 I0816L1200CT 8 16 10.80 9.80 165.00200 I1224L1200CU 12 24 10.80 9.80 188.00200 I1632L1200CU 16 32 14.80 9.80 202.00200 I2040L1200CU 20 40 12.80 9.80 231.00200 I3040L1200CU 30 40 14.80 9.80 343.00200 I4040L1200CU 40 40 24.80 9.80 376.00225 I4242L1225CU 42 42 26.80 9.80 496.00WHI0204ML1125WHHWRock SolidWRock Solid 1ø: High Circuit Main Lug Interiors (no neutrals) Dimensions ListAmps Catalog Number Spaces Circuits Height Width Price $125 IR1224L1125 12 24 10.80 7.40 99.00125 IR1632L1125 16 32 12.80 7.40 122.00125 IR2040L1125CU 20 40 14.80 7.40 144.00125 IR3040L1125 30 40 20.80 7.40 166.00200 IR0816L1200TR 8 16 10.80 7.40 132.00200 IR2040L1200CU 20 40 14.80 7.40 188.00200 IR2440L1200 24 40 16.80 7.40 210.00200 IR3040L1200CU 30 40 20.80 7.40 231.00200 IR4040L1200CU 40 40 24.80 7.40 298.00225 IR4242L1225CU 42 42 26.80 7.40 385.00HI1220L1200CTWH3-PHASEUltimate 1ø: Parallel Lug Interiors with Neutral BarsDimensions ListAmps Catalog Number Spaces Circuits Height Width Price $200 CTI2040L1200CU 20 40 14.80 9.80 418.00200 CTI2440L1200CU 24 40 16.80 9.80 441.00200 CTI3040L1200CU 30 40 20.80 9.80 496.00I0816ML1125CUWHW3ø: Main Lug InteriorsDimensions ListAmps Catalog Number Spaces Circuits Height Width Price $125 I1224L3125CU 12 24 10.50 8.70 254.00200 I1224L3200CU 12 24 10.50 8.70 276.00200 I1836L3200CU 18 36 13.50 8.70 330.00200 I2442L3200CU 24 42 16.50 8.70 385.00200 I3042L3200CU 30 42 19.50 8.70 518.00225 I4242L3225CU 42 42 25.50 8.70 606.00HI0408ML1125Parallel LugLug DataWInterior Amperage Wire range TorqueI0204ML1060 60 2/0 - 4 AWG 45 lb. - ins.I0303ML3100 100 2/0 - 4 AWG 45 lb. - ins.I1224ML1100 100 2/0 - 4 AWG 45 lb. - ins.I0408ML1125 125 2/0 - 4 AWG 45 lb. - ins.I0816ML1125CU/CUSP 60 2/0 - 4 AWG 45 lb. - ins.Ultimate 125 2/0 - 4 AWG 110 lb. - ins.Ultimate 200/225 300 kcmil - 4 AWG 110 lb. - ins.Rock Solid 125 2/0 - 4 AWG 110 lb. - ins.Rock Solid 200/225 300 kcmil - 4 AWG 275 lb. - ins.Three Phase 125 300 kcmil - 6 AWG 340 lb. - ins.Three Phase 200/225 300 kcmil - 6 AWG 340 lb. - ins.HWI0202L1200HUltimate UL Recognized Components. The letters “CU” in any catalog number represent copperbus bars. Feed thru lugs provided. Convertible to main breaker using the MBK main breakerkits.1-16Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Ultimate Load CentersMain Breaker Wiring DiagramsAll load centers comply fully with NEC and UL requirements for Class CTL.Single Main – 1-Phase, 3-WireWiring Diagrams1GNEUTRAL1LINEBOND WHENREQUIRED2NNEUTRALGNEUTRAL1LINEBOND WHENREQUIRED2NNEUTRALGNEUTRAL1LINEBOND WHENREQUIRED2NNEUTRALLOAD CENTERS &CIRCUIT BREAKERSEQPT GND23G1224B1100G1224B1100CUW1224B1100CU24EQPT GNDEQPT GND23G1624B1100G1624B1100CUW1624B1100CU24EQPT GNDEQPT GND29G1630B115030EQPT GNDLINEBOND WHENREQUIREDGLINEBOND WHENREQUIREDNGEQPT GNDNEUTRALLINE1 219 20G2020B1100G2020B1100CUW2020B1100CUBOND WHENREQUIREDNNEUTRALEQPT GNDGEQPT GNDNEUTRAL123G2424B1100CU224NNEUTRALEQPT GNDGEQPT GNDNEUTRAL139G2440B1200G2440B1200CULINE240NEUTRALEQPT GNDBOND WHENREQUIREDLINEBOND WHENREQUIREDLINEBOND WHENREQUIREDGNGEQPT GNDNEUTRAL1 2NNEUTRALEQPT GNDGEQPT GNDGNEUTRAL12NNEUTRALEQPT GNDGEQPT GNDNEUTRAL1 2NEUTRALEQPT GND29 303940G3030B1100CUG3040B1200G3040B1200CUW3040B1200CU39 40G4040B1200G4040B1200CUW4040B 1200CUSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-17

1Ultimate Load CentersMain Lug Wiring DiagramsAll load centers comply fully with NEC and UL requirements for Class CTL.Single Main – 1-Phase, 3-WireWiring DiagramsLOAD CENTERS &CIRCUIT BREAKERSGNEUTRAL1LINEA BBOND WHENREQUIRED2NNEUTRALGNEUTRAL1LINEA BBOND WHENREQUIRED2NNEUTRALGNEUTRAL1LINEA B2NNEUTRALEQPT GNDGEQPT GNDNEUTRAL11G1212L1125G1212L1125CULINEA B1 212NNEUTRALEQPT GNDEQPT GNDEQPT GNDGEQPT GNDNEUTRAL231G1224L1125G1224L1125CUW1224L1125CUG1224L1200CUW1224L1200CULINEA B224NNEUTRALEQPT GNDEQPT GNDEQPT GNDGEQPT GNDNEUTRAL231G1624L1125G1624L1125CUW1624L1125CULINEA B224NNEUTRALEQPT GNDEQPT GND19 20G2020L1125G202061125CU23G2424L11252439G2440L1200G2440L1200CUW2440L1200CU40LINEABNGNEUTRALLINEA B1 2NNEUTRALGNEUTRAL1LINEA B2NNEUTRALEQPT GNDEQPT GNDGEQPT GNDNEUTRALEQPT GNDEQPT GND1 2NEUTRALEQPT GND29 30G3030L1200G3030L1200CU39G3040L1200G3040L1200CUW3040L1200CU4039 40G4040L1200G4040L1200CUW4040L1200CU1-18Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

EQ Load Centers3-Phase Load CenterWiring DiagramsMain BreakerWiring DiagramsABCGABC1NGNNLOAD CENTERS &CIRCUIT BREAKERSG3030B3100CUG3042B3150CUG3042B3200CUW3042B3150CUW3042B3200CUG4242B3200CUG4242B3225CUW4242B3200CUW4242B3225CUMain LugWiring DiagramsABCMAIN BREAKERPOSITION WHEN REQ'DMAIN BREAKERABCMAIN BREAKERPOSITION WHEN REQ'DGNABCPOSITION WHEN REQ'DGNNABCMAIN BREAKERPOSITION WHEN REQ'DABCMAIN BREAKERPOSITION WHEN REQ'D30 28 26 24G22212GN4108N142016186GG1224L3125CUG1224L3200CUW1224L3125CUW1224L3200CUG2442L3150CUG2442L3200CUW2442L3150CUW2442L3200CUG1836L3150CUW1836L3150CUG3042L3200CUW3042L3200CUG4242L3200CUG4242L3225CUW4242L3200CUW4242L3225CUSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog1-19

EQ ® Load CentersMain Breaker 300-400 AmperesWiring Diagrams1LOAD CENTERS &CIRCUIT BREAKERSMain Breaker300-400 AmperesWiring DiagramsE3030MB1400SCUW3030MB1400CU30-Poles Max.E4242MB1300SCUE4242MB1300FCUE4242MB1400SCUE4242MB1400FCUW4242MB1400CU42-Poles Max.E3030MB3400SCU30-Poles Max.E4242MB3300SCUE4242MB3400SCUE4242MB3400FCUW4242MB3400CU42-Poles Max.Main Lugs400 AmpereWiring DiagramsW0606ML1400CU(6) 2-Poles Max.E3030ML1400SCUW3030ML1400CO30-Poles Max.E4242ML1400SCUE4242ML1400FCUW4242ML1400CU42-Poles Max.E3030ML3400SCU30-Poles Max.E4242ML3400SCUE4242ML3400FCUE4242ML3400CU42-Poles Max.1-20Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Ultimate Load CenterIndoor and Outdoor EnclosuresIndoor Main Breaker and Main Lug Enclosures10 K.O.s For0.5", 0.75", 1"Conduit2 K.O.s For.038", 0.5", 0.75", 1",1.25"Conduit4 K.O.s For0.25" ConduitKnockout Diagrams1LOAD CENTERS &CIRCUIT BREAKERS10 K.O.s For1", 1.25", 2", 2.5"Conduit12 K.O.s For.038", 0.5", 0.75"Conduit52 K.O.s For0.5" ConduitOutdoor Main Breaker and Main Lug EnclosuresHS Hub Provision2 K.O.s For1", .75", .5"Conduit2 K.O.s For1.5", 1.25", 1"Conduit3 K.O.s For2.5", 2", 1.5", 1.25", 1"Conduit15 K.O.s For .5"Conduit2 K.O.s For 1", .75", .5"Conduit4 K.O.s For .75", .5"ConduitSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-21

EQ ® Load CentersOutdoor EnclosuresOutdoor Enclosure Knockout DiagramsKnockout DiagramsLOAD CENTERS &CIRCUIT BREAKERS1W0204ML1060W0204ML1125W0303ML3100WB3100WB2225 and WB32225W0408ML1125W0612ML1125W0816ML1125100A – 225AMain Breaker and Main LugDevicesW0406ML1125CU1-22Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

EQ ® Load CentersIndoor EnclosuresIndoor Enclosure Knockout DiagramsKnockout Diagrams1LOAD CENTERS &CIRCUIT BREAKERSE0204ML1060E0408ML1125E0612ML1125E0816ML1125E1224ML1100FE0303ML3100SCUEB3100300-400A MainBreaker andMain Lug DevicesEB3225All RiserPanelsRAG24Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-23

1LOAD CENTERS &CIRCUIT BREAKERSCircuit BreakersType QP with INSTA-WIRE1-Pole Plug-In (120V AC) Type QP Type QPH Type HQPContinuous10,000A IR 22,000A IR 65,000A IRCurrent Rating Catalog List Catalog List Catalog List@ 40° C Number Price $ Number Price $ Number Price $10 Q110 NEW 33.00 — — — —15 Q115 33.00 Q115H 66.00 Q115HH■ 123.0020 Q120 33.00 Q120H 66.00 Q120HH■ 123.0025 Q125 33.00 Q125H■ 66.00 Q125HH■ 123.0030 Q130 33.00 Q130H 72.00 Q130HH■ 143.0035 Q135■ 33.00 Q135H■ 72.00 Q135HH■ 143.0040 Q140 33.00 Q140H 72.00 Q140HH■ 143.0045 Q145■ 33.00 Q145H■ 72.00 Q145HH■ 143.0050 Q150 33.00 Q150H 72.00 Q150HH■ 143.0060 Q160 33.00 Q160H■ 72.00 Q160HH■ 143.0070 Q170 69.00 Q170H■ 93.00 Q170HH■ 179.002-Pole Plug-In (Common-Trip 120/240V AC ) 10 Q210 71.00 — — — —15 Q215 71.00 Q215H 147.00 Q215HH 313.0020 Q220 71.00 Q220H 147.00 Q220HH 313.0025 Q225 71.00 Q225H■ 147.00 Q225HH■ 313.0030 Q230 71.00 Q230H 147.00 Q230HH 313.0035 Q235 71.00 Q235H■ 147.00 Q235HH■ 313.0040 Q240 71.00 Q240H 147.00 Q240HH■ 334.0045 Q245 71.00 Q245H■ 147.00 Q245HH■ 334.0050 Q250 71.00 Q250H 147.00 Q250HH 334.0060 Q260 71.00 Q260H 147.00 Q260HH 334.0070 Q270 145.00 Q270H 236.00 Q270HH 558.0080 Q280 210.00 Q280H■ 330.00 Q280HH■ 689.0090 Q290 210.00 Q290H 330.00 Q290HH■ 689.00100 Q2100 210.00 Q2100H 330.00 Q2100HH 689.00110 Q2110 433.00 Q2110H 1128.00 Q2110HH■ 2277.00125 Q2125 433.00 Q2125H 1128.00 Q2125HH 2277.002-Pole Plug-In (Common-Trip 240V AC) 15 Q215R 213.00 — — — —20 Q220R 213.00 — — — —30 Q230R 213.00 — — — —40 Q240R 213.00 — — — —50 Q250R 213.00 — — — —60 Q260R 213.00 — — — —70 Q270R 236.00 — — — —100 Q2100R■ 330.00 — — — —3-Pole Plug-In (Common-Trip 240V AC) 10 Q310 253.00 — — — —15 Q315 253.00 Q315H 395.00 Q315HH■ 527.0020 Q320 253.00 Q320H 395.00 Q320HH 527.0025 Q325 253.00 Q325H■ 395.00 Q325HH■ 527.0030 Q330 253.00 Q330H 395.00 Q330HH 527.0035 Q335 253.00 Q335H■ 395.00 Q335HH■ 527.0040 Q340 253.00 Q340H 395.00 Q340HH 615.0045 Q345 253.00 Q345H■ 395.00 Q345HH■ 615.0050 Q350 253.00 Q350H 395.00 Q350HH 615.0060 Q360 253.00 Q360H 500.00 Q360HH 660.0070 Q370 317.00 Q370H 500.00 Q370HH■ 660.0080 Q380 380.00 Q380H 560.00 Q380HH■ 740.0090 Q390 380.00 Q390H 560.00 Q390HH■ 740.00100 Q3100 380.00 Q3100H 560.00 Q3100HH 740.00QP / QPH / HQP Internal AccessoriesControl Voltage AC Catalog Number Field/Factory Installed List Price $120V Shunt Trip add suffix …00S01■ Factory 134.00 (adder)24V Shunt Trip add suffix …00S07■ Factory 134.00 (adder)120V Auxiliary Switch add suffix …01■ Factory 74.00 (adder)3-Pole Padlocking Device ECQLD3 Field 98.00Handle Block ECHBD1 Field 9.10ModificationsSelectionDescription Catalog Number List Price $400 Hz Calibration add suffix …Y 7.50 (adder)415V 50Hz Calibration add suffix …E No adderMarine 50˚C AmbientCalibrationadd suffix …M No adderFungus Proofing add suffix …F 10.00 (adder per pole)■ Built to order. Allow 2-3 weeks for delivery. UL Listed for use with 60/75˚ wire through 125 amps,HACR rated. 1A and 1B contacts. UL Listed for frequent switching applications (SWD).120V AC Fluorescent Lighting. UL Listed for use on 3-phase grounded “B” systems —10,000 for this application. Shipped 12 per sleeve. Shipped 6 per sleeve. Shipped 4 per sleeve. UL Listed 5 KA IR. Not UL Listed. 1 & 2-Poles only. NEW Type QP1, UL listed for 16 AWG conductors andmultiple wires.1-24Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Circuit BreakersDuplex, Triplex and Quadplex Plug-In BreakersDuplex Circuit BreakersSelectionBreaker Ampere Catalog List Catalog ListType Rating Number Price $ Number Price $QT 15–15 Q1515 69.00 Q1515NC 114.001-Pole 15–20 Q1520 69.00 Q1520NC 114.0010K AIC 20–20 Q2020 69.00 Q2020NC 114.00120V AC 20–30 Q2030 69.00 — —15–30■ Q3015 69.00 — —20–30 Q3020 69.00 — —30–30 Q3030 69.00 Q3030NC 114.00SHIPPING: 12 per carton, (Wt. 4.8 lbs.)Triplex Circuit BreakersAmpere RatingBreaker Single Common-Trip Catalog ListType Pole 2-Pole Number Price $QT 15 15 Q21515CT 134.002-Pole 15 20 Q21520CT 134.0010K AIC 15 25 Q21525CT■ 134.00120/240V AC 15 30 Q21530CT 134.00Center 15 35 Q21535CT■ 134.00Common Trip 15 40 Q21540CT 134.0015 45 Q21545CT■ 134.0015 50 Q21550CT 134.0020 20 Q22020CT 134.0020 25 Q22025CT■ 134.0020 30 Q22030CT 134.0020 35 Q22035CT■ 134.0020 40 Q22040CT 134.0020 45 Q22045CT■ 134.0020 50 Q22050CT 134.0030 30 Q23030CT 128.00SHIPPING: 6 per carton, (Wt. 4.9 lbs.)QT DuplexThese space saver duplex breakers combine twoindependent 1/2" breaker poles in a common unit.This unit plugs into one load center stab andrequires one panel space. HACR rated.QT TriplexThese space saver triplex breakers providea 2-pole common trip breaker for 120/240V ACcircuits and two single poles for 120V AC circuits.Triplex require two panel spaces. HACR rated.1LOAD CENTERS &CIRCUIT BREAKERSQuadplex Circuit BreakersAmpere RatingBreaker Inside Outside Catalog ListType 2-Pole 2-Pole Number Price $QT 15 15 Q21515CT2 139.002-Pole 20 20 Q22020CT2 139.0010K AIC 20 30 Q23020CT2 139.00120/240V AC 20 40 Q24020CT2 139.00Common Trip 30 30 Q23030CT2 139.0030 40 Q24030CT2 139.0040 40 Q24040CT2 139.0050 30 Q23050CT2 139.00SHIPPING: 6 per carton, (Wt. 4.8 lbs.)QT AccessoriesDescription Catalog Number List Price $Handle Block ECBX231M 9.70QT QuadplexCommon TripThese space saver quadplex breakers providetwo sets of common trip, two-pole breakers for120/240V AC circuits, and require two panelspaces. HACR rated.For inches / millimeters conversion, see Application Datasection.■ Built to order. Allow 2–3 weeks for delivery. Non-CTL. For replacement use only in panels manufacturedbefore 1968Discount Schedule RESISiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-25

1LOAD CENTERS &CIRCUIT BREAKERSCircuit BreakersArc-Fault and Ground-Fault Breakers▪ UL Listed and CSA Certified▪ HACR Rated▪ Standard 1 inch per pole format with plug-in designGround-Fault Circuit Interrupters (Class A - 5mA) Ground-fault circuit interrupters (GFCI) provide Class A ground fault protection. A GFCIis a device intended for personnel protection and will de-energize the circuit when afault current to ground is 6 milliamperes or more.10,000 A IR 22,000 A IRBreaker Ampere Catalog List Catalog ListType Rating Number Price $ Number Price $QPF/QPHF 15 QF115 255.00 QF115H 515.001-Pole 20 QF120 255.00 QF120H ■ 515.00120V AC 25 QF125■ 255.00 — —Plug-In 30 QF130 255.00 QF130H 515.00QPF/QPHF15 QF215 454.00 QF215H 678.002-Pole120/240V ACPlug-In20 QF220 454.00 QF220H 678.0030 QF230 454.00 QF230H 678.0040 QF240 454.00 QF240H 678.0050 QF250 454.00 QF250H 678.0060 QF260 454.00 QF260H 678.00Selection/Wiring Diagrams1-Pole GFCI2-Pole GFCIGround Fault Equipment Protection (30mA) Type EQF circuit breakers provide protection of equipment from damagingline-to-ground fault currents by de-energizing the circuit for all ungroundedconductors of the faulted circuit.QE/QEH 15 QE115 465.00 QE115H 777.001-Pole 20 QE120 465.00 QE120H 777.00120V AC 30 QE130 465.00 QE130H 777.00Plug-In15 QE215 616.00 QE215H 1016.00QE/QEH20 QE220 616.00 QE220H 1016.002-Pole120/240V ACPlug-In30 QE230 616.00 QE230H 1016.0040 QE240 616.00 QE240H 1016.0050 QE250 616.00 QE250H 1016.0060 QE260■ 616.00 QE260H■ 1016.001-Pole EquipmentProtection2-Pole EquipmentProtectionArc-Fault Circuit Interrupters (AFCI) Arc-fault circuit interrupters (AFCI) detect arcing faults (an unintentional arcing conditionin a circuit) that standard circuit breakers are unable to detect. An AFCI is a branchfeeder device intended to mitigate the effects of arc-faults by de-energizing the circuitwhen an arc-fault is detected.QAF/QAFH 15 Q115AF 255.00 Q115AFH■ 515.001-Pole 120V AC 20 Q120AF 255.00 Q120AFH■ 515.00QAF/QAFH15 Q215AF 454.00 Q215AFH■ 660.002-Pole 120/240V AC 20 Q220AF 454.00 Q220AFH■ 660.001-Pole AFCI2-Pole AFCIQAF/QPF/QE AccessoriesDescription Catalog Number List Price $Handle Block ECBX231M 9.70Wiring Diagrams■ Built to order. Allow 2–3 weeks for delivery. UL Listed as SWD (Switching Duty) Rated, suitable for120V AC Fluorescent Lighting. White line neutral (pigtail) must be connected to thepanel neutral for the device to function.1-26Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Circuit BreakersSpecial Application BreakersHID LightingFor high-intensity discharge lamp loads having in-rush currentsabove the instantaneous trip setting of a standard breaker.Complete BreakerUL UnenclosedBreaker Wiring Ampere Catalog ListType Diagram Rating Number Price $QP 15 Q115HID ■ 44.501-Pole Figure 1 20 Q120HID 44.50120V AC 30 Q130HID 44.50QP 15 Q215HID 91.002-Pole Figure 2 20 Q220HID■ 91.00120/240V AC 30 Q230HID■ 91.00Molded Case SwitchFor applications that do not require overcurrent protection.QP2-Pole 30 Q230S 49.00Plug-In Figure 2 60 Q260S 49.00240V ACSwitching NeutralSelection1LOAD CENTERS &CIRCUIT BREAKERSNo-NoiseFor applications that require a reduction in the 60-cycle hum of astandard breaker.QP 50 Q250NN■ 72.002-Pole Figure 2 60 Q260NN 72.00120/240V AC 70 Q270NN 148.0090 Q290NN■ 203.00Switching NeutralsUsed where all conductors are required to be disconnected.Neutral pole of the circuit breaker does not connect to loadcenterbus. One side is wired to neutral and the other side to the device.QG2-Wire 15 QG215 119.00Common Trip Figure 3 20 QG220 119.00120V AC 30 QG230■ 119.00QG3-Wire 15 QG315■ 172.00Common Trip Figure 4 20 QG320 172.00120/240V AC 30 QG330■ 172.00Tungsten LightingFor high wattage, tungsten-lamp loads having in-rush currentsabove the instantaneous trip setting of a standard breaker.QP1-Pole Figure 1 15 Q115T ■ 32.00120V AC 20 Q120T 33.00Water HeaterFigure 1 Figure 2Figure 3 Figure 4Figure 5Water HeaterWhen installed in a loadcenter, the water heater circuit breakerdoes not make electrical connection with the loadcenter bussing.Separate metered circuit is connected to line terminals of thebreaker. Used in special rate water heating areas.QW2-Pole 15 QW215 91.00120/40V AC Figure 5 20 QW220 91.00Plug-In 30 QW230 91.00Wiring Diagrams■ Built to order. Allow 2–3 weeks for delivery.Note: All circuit breakers on this page are 10K AIC UL Listed as SWD (Switching Duty) Rated, suitable for 120V AC Fluorescent Lighting.Discount Schedule RESISiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-27

1LOAD CENTERS &CIRCUIT BREAKERSCircuit Breakers3/4 Inch Plug-In Breakers SelectionFeatures▪ 3/4" format▪ HACR Rated▪ UL Classified for use in certain Square Dload centersType QD Circuit BreakersThe Type QD circuit breaker line isavailable in 1-pole and 2-pole commontrip versions listed on this page.The circuit breakers are UL Classifiedand UL Listed.All QD breakers are supplied with loadside connectors suitable for 60/75°Cwire and are calibrated for 40°Cmaximum ambient applications.UL ClassifiedSiemens Type QD circuit breakers areUL Classified for use in specific SquareD load centers in place of Square D TypeQO ® circuit breakers. A PanelboardCompatibility List packaged with eachQD breaker shows which type QDcircuit breakers are acceptable foruse in Square D load centers.The interrupting rating on these circuitbreakers is 10,000A IR maximum andthey are not series rated with Square Dcircuit breakers or equipment. This ULClassification allows a Siemens Type QDcircuit breaker to be used in place of aSquare D Type QO circuit breaker inthose load centers that are specificallyshown on the Panelboard Compatibilitylist. For additional information, contactyour local Siemens sales engineer.1-Pole2-PoleContinuous120V120/240V Common TripCurrent Rating Catalog List Catalog List@ 40°C Number Price $ Number Price $15 D115 33.00 D215 72.0020 D120 33.00 D220 72.0030 D130 33.00 D230 72.0040 D140 33.00 D240 72.0050 D150 33.00 D250 72.0060 D160 33.00 D260 72.00Shipping WeightsNumber of Number Per ShippingPoles Carton Weight (lbs.)1 16 3.82 8 4.2Panelboard Compatibility ListListed Panelboards—Square D—Catalog NumbersQO2L30F/SQO2-4L70F/SQO2-4L70TSQO2-4L70RBQO6-12L100F/SQO6-12L100DF/SQO6-12L100TF/SQO6-12L100DTF/SQO6-12L100RBQO8-16L100F/SQO8-16L100DF/SQO8-16L100TF/SQO-16L100DTF/SQO8-16L100RBQO112M100/RBQO116M100/RBQO120M100/RBQO124M100QO12L100DF/SQO12L100RBQO12-20M100/RBQO12-20M100TF/SQO12M100/RBQO16-20M100/RBQO16M100/RBQO20M100/RBQO112L125G/RBQO112-24L125/RBQO112-24L125GWGCQO116L125GQO116-24L125G/RBQO12-24L125/RBQO120-24L125GQO120-24L125GWGCQO120L125GQO124L125G/RBQO124M125/RBQO16L125/RBQO16-12M125FTRBQO16-24L125/RBQO20L125/RBQO20-24L125/RBQO24L125/RBQO120-30L150GQO120-30M150/RBQO124L150GQO124M150QO130L150G/RBQO130M150/RBQO16L150/RBQO16M150/RBQO16-30L150/RBQO18-16M150FTRBQO20-30M150/RBQO20-30M150TF/SQO20-30L150QO24L150/RBQO24M150/RBQO30L150/RBQO30M150/RBQO8-16M200FT/RBQO112L200G/RBQO120-40M200/RBQO120-40M200TCQO124M200QO130L200G/RBQO130-40M200QO130200/RBQO130-40L200G/RBQO140M200/RBQO16L200/RBQO16M200/RBQO18-16M200FTRBQO20-40L200/RBQO20-40M200TF/SQO20-40M200/RBQO24L200/RBQO24M200/RBQO30L200/RBQO30M200/RBQO30-40L200/RBQO30-40M200/RBQO40M200/RBQO140M225QO142L225G/RBFor inches / millimeters conversion, see Application Datasection. UL Listed for frequent switching applications (SWD).120V AC Fluorescent Lighting. One or two loadconductors.1-28Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Circuit BreakersMain and Branch Circuit Breakers SelectionBreaker Ampere Catalog List Catalog List UL InterruptingType Rating Number Price $ Number Price $ Ratings (kA)QN 150 QN2150 477.00 QN2150R 477.00 102-Pole 175 QN2175■ 477.00 QN2175R ■ 477.00 10120/240V AC 200 QN2200 477.00 QN2200R 477.00 10QNH 150 QN2150H 586.00 QN2150RH 586.00 222-Pole 175 QN2175H■ 586.00 QN2175RH ■ 586.00 22120/240V AC 200 QN2200H 586.00 QN2200RH 586.00 22HQN 150 HQN2150 2514.00 HQN2150R 2514.00 652-Pole 175 HQN2175■ 2514.00 HQN2175R ■ 2514.00 65120/240V AC 200 HQN2200 2514.00 HQN2200R 2514.00 65Requires 4 panel spaces, 2 adjacent and 2 opposite. SHIPPING: 1 per carton (Wt. 3 lbs.)Main Breaker KitsQNR QN 1LOAD CENTERS &CIRCUIT BREAKERSFor use in Ultimate Load Centers For use in EQIII Load CentersUL Ampere Catalog List UL Ampere Catalog List UL InterruptingType Rating Number Price $ Type Rating Number Price $ Ratings (kA)EQ8681 100 MBK100A 230.00 EQ9675 100 MBK100 260.00 22EQ8682 125 MBK125A 473.00 EQ9676 125 MBK125 513.00 22EQ8693 150 MBK150A 588.00 EQ9683 150 MBK150 639.00 22EQ8695 200 MBK200A 588.00 EQ9685 200 MBK200 639.00 22EQ8696 225 MBK225A 588.00 EQ9686 225 MBK225 639.00 22Breaker Ampere Catalog UL Interrupting ListType Rating Number Ratings (kA) Price $QPJ 125 QPJ3125 10 1226.003-Pole 150 QPJ3150 10 1226.00240V AC 200 QPJ3200 10 1226.00EQ96XXRequires 6 spaces due to cross over design. Fits only EQIII 125-400A 3-phase load centersSHIPPING: 5 per carton (Wt. 17 lbs.)UL InterruptingBreaker Ampere Catalog List Ratings (kA)Type Rating Number Price $ Volts AC 120/240MBK(100,125)AMBK(150,200,225)AQPP2-Pole120/240V AC125 Q2125B 441.00 10150 Q2150B 441.00 10175 Q2175B■ 441.00 10200 Q2200B 441.00 10225 Q2225B 441.00 10125 Q2125BH 1129.00 22150 Q2150BH 1129.00 22175 Q2175BH■ 1129.00 22200 Q2200BH 1129.00 22225 Q2225BH■ 1129.00 22QPPH2-Pole120/240V ACHQPP2-Pole120/240V ACHQPPH2-Pole120/240V AC125 Q2125BHH■ 2238.00 65150 Q2150BHH 2238.00 65175 Q2175BHH■ 2238.00 65200 Q2200BHH 2238.00 65225 Q2225BHH■ 2238.00 65100 HQ2100BH■ 2733.00 100125 HQ2125BH■ 2733.00 100150 HQ2150BH■ 2733.00 100175 HQ2175BH■ 2733.00 100200 HQ2200BH■ 2733.00 100225 HQ2225BH■ 2733.00 100Circuit breaker is 4-poles wide. For use on 200A modular and Uni-Pak® metering,and on 300-600A load centers.SHIPPING: 8 per master carton (Wt. 17.5 lbs., 2 per carton)QN/QNH/HQN and Ultimate Main Breaker KitAccessories (Factory installed only)Shunt TripControl Voltage AC Add Suffix List Adder $120V 00S01■ 275.00For inches / millimeters conversion, see Application Data section.■ Built to order. Allow 2–3 weeks for delivery. All circuit breakers on this page are common trip. Reverse handle. Not UL Listed. MBK100A for use in 100 and 125A load centers.MBK125A for use in 125A load centers.MBK150A for use in 150, 200 and 225A load centers.MBK200A for use in 200 and 225A load centers.MBK225A for use in 225A load centers.MBK175A for use in 200 and 225A load centers.2-Pole QPPQPJ QNR required for horizontal applications or verticalapplications where the lugs are facing up. The QNbreaker is required for vertical applications where thelugs are facing down as shown.Discount Schedule RESISiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-29

Circuit BreakersLine DiagramsDimension DrawingsLOAD CENTERS &CIRCUIT BREAKERS11-Pole 2-Pole 3-Pole3"2 3 /8"3 1 /8"QP, QPH, HQPType QTType QPF, QPHF, QE, QAF, QAFHType EQ8681, EQ8682Type EQ8693, EQ8695, EQ8696Type QPJType QN, QNH, HQNType QNR, QNRH, HQNRType QPP, QPPH, HQPP, HQPPH All standard circuit breakers are calibrated to 40°C maximumambient application.1-30Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Circuit BreakersLug DataReferenceCircuitCircuit Breaker Cables ConnectorBreaker Ampere Per WireType Rating Connector RangeLOAD SIDEQP, QPH, HQP, Plug-in 10 2 #16 AWG Cu1 #14–#8 AWG Cu15–201 #12–#8 AWG Al1 #14–#6 AWG Cu25–351 #14–#6 AWG Al1 #8–#6 AWG Cu40–501 #8–#4 AWG Al1 #8–#4 AWG Cu55–701 #8–#2 AWG Al1 #4–#1/0 AWG Cu80–1001 #2–#1/0 AWG Al1 #2–#1/0 AWG Cu110–125 1 #1/0–#2/0 AWG Al1LOAD CENTERS &CIRCUIT BREAKERSQT 15–35QPF, QPHF 15–30QAF, QAFH 15–20QD1 #14–#8 AWG Cu1 #12–#8 AWG Al40 1 #8 AWG CU-Al40–501 #8–#6 AWG Cu1 #8–#4 AWG Al1 #14–#10 AWG Cu1 #12–#8 AWG Al40–601 #8–#6 AWG Cu1 #8–#4 AWG Al1 #14–#12 AWG Cu1 #12–#10 AWG Al15–20 2 #14–#8 AWG Cu Only15–20 1#14–#12 AWG Cu#12–#10 AWG Al25–351 #10–#8 AWG Cu1 #10–#6 AWG Al40–601 #8–#6 AWG Cu1 #8–#4 AWG AlQN, QNH, HQN 150–200 1 #1–300kcmil Cu-AlEQ8681-Ultimate 100 1 #4–3/0 AWG Cu-AlEQ8682-Ultimate 125 1 #4–3/0 AWG Cu-AlEQ8693-Ultimate 150 1 #1–300kcmil Cu-AlEQ8695-Ultimate 200 1 #1–300kcmil Cu-AlEQ8696-Ultimate 225 1 #1–300kcmil Cu-AlQPP, QPPH, HQPP, HQPPH 1251 #1 AWG Cu150175200225EQ9675-EQIII 100EQ9677-EQIII 125EQ9683-EQIII 150EQ9685-EQIII 200EQ9686-EQIII 2251 #2/0 AWG Al1 #1/0 AWG Cu1 #3/0 AWG Al1 #2/0 AWG Cu1 #4/0 AWG Al1 #3/0 AWG Cu1 250kcmil AWG Al1 #4/0 AWG Cu1 300kcmil AWG Al1 #3 AWG Cu1 #1 AWG Al1 #1 AWG Cu1 #2/0 AWG Al1 #1/0 AWG Cu1 #3/0 AWG Al1 #3/0 AWG Cu1 250kcmil AWG Al1 #4/0 AWG Cu1 300kcmil AWG AlQPJ 125–200 1 #2–300kcmil Cu-AlSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-31

1LOAD CENTERS &CIRCUIT BREAKERSSurge ProtectionPoint-of-EntryCircuit Breaker and Secondary Surge ArresterCircuit Breaker and TVSSFeatures▪ UL Listed▪ Easy to install▪ Perfect for retrofit - replaces two 1-inch breakers without losing any circuits▪ A single device protects the entire electrical system from damage caused by surgesBy installing a Siemens Circuit Breaker/Surge Arrester or Circuit Breaker/TVSS device inthe load center of the residence, surge protection is provided for all branch circuits. Two red LED indicator lights are provided to show that surge protection is provided for allcircuits connected to the panelboard. As a Siemens exclusive feature, the device notifiesthe owner of loss of surge protection by tripping one or both of the circuit breakers.These breakers should be used for circuit protection of frequently used household orfacility circuits because the lights and devices connected to these circuits provide aneffective indication that surge protection is being provided.Surge ArresterSelectionBreaker Ampere Catalog List SurgeType Rating Number Price $ TypeQP 1-Pole(2) 15 QSA1515 261.00 Surge Arrester120/240V AC(2) 20 QSA2020 261.00 Surge Arrester10K AICThe Siemens circuit breaker and transient voltage surge suppressor is comprised of a highly effective TVSS moduleintegrated with (2) 1-pole circuit breakers. This device incorporates the robust features of our secondary circuit breakersurge arrester with a lower clamping voltage rating.By installing a Siemens Circuit Breaker/TVSS device in the load center of the residence, surge protection is not onlyprovided for all branch circuits, but also, fixtures, appliances, motors, and other electronic equipment in the houseserved by that load center. Circuit Breaker and Circuit Breaker and TransientQP 1-Pole120/240V AC10K AIC(2) 20 QSA2020TVSS 377.00 TVSSSecondary Surge ArresterVoltage Surge SuppressorNumber of Poles (2) 1-Pole Circuit Breakers (2) 1-Pole Circuit BreakersInitial Clamping Level 360 Volts 240 VoltsTransient Energy Rating 460 Joules line-to-neutral 360 Joules line-to-neutral920 Joules line-to-line 720 Joules line-to-lineSecondary Surge Arrester Voltage Rating 175V AC max. line-to-ground –Transient Suppression Voltage Rating – 500 volts peak, line-to-neutral– 1000 volts peak, line-to-linePeak Current Rating (impulse) 40,000 amperes 40,000 amperesDischarge Voltage Characteristic @ 1,500A, 600 volts @ 1,500A, 600 volts(line-to-neutral) @ 5,000A, 800 volts @ 5,000A, 800 voltsDischarge Current Withstand Rating(line-to-neutral) 10,000 amperes 10,000 amperesCircuit Breaker Interrupting Rating 10,000A, 120/240V AC 10,000A, 120/240V ACWarranty Amount $10,000 $20,000Connected Appliances Warranty No YesWarranty Period 24 months 24 monthsLightning Protection No No UL Listed as SWD (Switching Duty) Rated, suitable for120V AC Fluorescent Lighting. HACR Rated See warranty for detailed coverage information. Doesnot include electronic devices.1-32Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Surge ProtectionPoint-of-EntryTransient Voltage Surge Suppressor▪ UL listed▪ Rated for single phase panels up to 400 amps▪ Audible Alarm▪ Guaranteed lightning protectionTPSA9040 shields motor-driven appliances in residential andlight commercial applications against electrical power surgedamage, including lightning, from entering through the mainelectrical service panel. Two LED lights indicate protectionstatus. The audible alarm alerts you when protection isdisrupted.TPSA9040Selection1LOAD CENTERS &CIRCUIT BREAKERSSurge Catalog ListType Number Price $TVSS TPSA9040 441.00Single Pulse Energy Dissipation1080 JoulesSpike Capacity40,000 amperesLine Voltage102/2401 Phase 50/60HzInitial Clamping Level400VRated Voltage150VShort Circuit Rating10,000 amperesWarranty Amount $20,000Connected Appliances WarrantyYesWarranty Period3 yearsLightning ProtectionYesSecondary Surge Arresters▪ UL listed▪ Rated for single and three phase panels▪ Suitable for indoor and outdoor installationThese Secondary Surge Arresters, also referred to as LightingArresters, are designed to protect electrical equipment fromdamaging effects of Spikes (+) and Notches (-) caused bylightning, utility switching, insulation arcing, electrical motorcycling, and other large or sudden changes in electrical powerflow on incoming AC power lines.CatalogListPhase Number Price $1 TPSASA1 154.003 TPSESA3 531.00TPSEA31-Phase3-Phase For flush mounting applications, use flush mount kitTPSA9040F.Discount Schedule RESISiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-33

1LOAD CENTERS &CIRCUIT BREAKERSSurge ProtectionPoint-of-Entry or Point-of-UseTelecommunication Protector▪ UL listed▪ Rated for RJ45 Modem/Fax/DSL protection▪ Easy to install▪ Guaranteed lightning protectionTPSTEL protects telephone or modems connectedelectronics in residential and light commercial applicationsagainst electrical transient damage, including lightning, fromentering through the main telephone connection. To havecomplete protection for your equipment, home, or business, itis important to protect AC power lines and all data lines theequipment is connected through.Surge Catalog ListType Number Price $Telco TPSTEL 245.00TPSTELSelectionAC Surge ProtectionEMI/RFI0.0 dbCatastrophic Surge CircuitYesSpike Capacity200 AmpsLet Through Voltage

ElectricenterAccessories Circuit Breaker AccessoriesCatalog List PackNumber Description Price $ Qty. ECQTH2 Handle Tie - Duplex 4.40 25ECQTH3 Handle Tie - 2-Pole 97.00 50ECQL1 Handle Blocking Device - 1" Handles 9.10 25ECBX231M Handle Blocking Device - 1/2" Handles 9.70 25ECMBR2Main Breaker Retainer - for UltimateLoad Centers14.50 1ECMBR1 Main Breaker Retainer - for EQ Load Centers 6.60 1ECQML12 Mechanical Interlock 299.00 10ECPLD1ECPLD2Padlocking Device - 1-Pole Type QP, QAF, QPF,QT DuplexPadlocking Device - 2-Pole Type QP, QAF, QPF,QT Triplex/Quadplex10.10 110.20 1ECPLD125 Padlocking Device - 100-125A Main Breaker 8.60 1ECPLD2R NEWRed Padlock for 2-pole 1" breakers andquad breakers15.30 1ECQLN3 NEW Padlock for QN, QNR, and 150-225A MBKA 55.00 1Ground Bar KitsCatalog List PackNumber Description Price $ Qty. ECGB5 Ground Bar Kit - 5 Position, #4-14 AWG Cu/Al 18.40 1ECGB10 Ground Bar Kit - 10 Position, #4-14 AWG Cu/Al 21.00 1ECGB101Ground Bar Kit - 10 Position, #4-14 AWG Cu/Al,1 Position #14-1/0 Cu/Al27.00 1ECGB14 Ground Bar Kit - 14 Position, #4-14 AWG Cu/Al 24.00 1ECGB141ECGB142Ground Bar Kit - 14 Position, #4-14 AWG Cu/Al,1 Position #14-1/0 Cu/AlGround Bar Kit - 14 Position, #4-14 AWG Cu/Al,1 Position #6-2/0 Cu/Al29.50 133.00 1ECGB20 Ground Bar Kit - 20 Position, #4-14 AWG Cu/Al 27.00 1ECGB201ECGB202Ground Bar Kit - 20 Position, #4-14 AWG Cu/Al,1 Position #14-1/0 Cu/AlGround Bar Kit - 20 Position, #4-14 AWG Cu/Al,1 Position #6-2/0 Cu/Al33.00 133.00 1ECINSGB5 Insulated Isolated Ground Bar - 5 Position 33.00 1ECINSGB14 Insulated Isolated Ground Bar - 14 Position 42.50 1ECINSGB20 Insulated Isolated Ground Bar - 20 Position 48.50 1ECCS1 Collar Strap - #14-1/0 AWG Cu/Al 8.00 1ECCS2 Collar Strap - #6 AWG - 250 kmil Cu/Al 23.00 1HubsCatalog List PackNumber Description Price $ Qty. ECHS000 Closure Plate 38.00 1ECHS075 Hub - 3/4" 39.50 1ECHS100 Hub - 1" 39.50 1ECHS125 Hub - 1 1/4" 39.50 1ECHS150 Hub - 1 1/2" 39.50 1ECHS200 Hub - 2" 69.00 1ECHS250 Hub - 2 1/2" 109.00 1Load Center Conversion KitsSelectionCatalog List PackNumber Description Price $ Qty. MBK100AMBK125AMBK150AMBK200AMBK225AECMLK125ECMLK225MCB12Lug KitsMain Breaker Conversion Kit - for use in100–125A Ultimate Load CentersMain Breaker Conversion Kit - for use in125A Ultimate Load CentersMain Breaker Conversion Kit - for use in150–225A Ultimate Load CentersMain Breaker Conversion Kit - for use in200–225A Ultimate Load CentersMain Breaker Conversion Kit - for use in225A Ultimate Load CentersMain Lug Conversion Kit - 100–125AUltimate Load CentersMain Lug Conversion Kit - 150–225AUltimate Load Centers300MCM Lugs and Straps for OldEQ Style Load Center230.00 1473.00 1588.00 1588.00 1588.00 124.50 126.50 150.00 1Catalog List PackNumber Description Price $ Qty. ECLKB1 Ground Lug Kit - for Ultimate Load Centers 26.50 1ECLK3 Neutral Lug Kit - #1-300 AWG Cu/Al 24.00 1ECLK1-2 Neutral Lug Kit - #2-1/0 AWG Cu/Al 13.90 1ECLK2 Neutral Lug Kit - #4-2/0 AWG Cu/Al 18.40 1ECLK2SCECLK2150Neutral Lug Kit for Swiss Cheese styleneutral/ground bar - #4-2/0 AWG Cu/AlSub-Feed Lug Kit - #14-2/0 AWG Cu,#1/0 AWG Al21.00 1100.00 1ECLK2125 Sub-Feed Lug Kit - #3-1 AWG Cu, #1/0 AWG Al 30.50 1ECLK2225 Sub-Feed Lug Kit - #2-300 148.00 1ECLK31253-Pole Sub-Feed Lug Kit - #3-1 AWG Cu,#1/0 AWG Al42.00 1ECLK3225 3-Pole Sub-Feed Lug Kit - #2-300 AWG 202.00 1Miscellaneous Load Center AccessoriesCatalog List PackNumber Description Price $ Qty. ECQFL2Add-A-Lock - Flush Mount, 100–225A UltimateLoad Centers89.00 1ECQFL1 Add-A-Lock - Flush Mount, Replacement Only 89.00 1ECCP1 Circuit Directory Cards - 42 Circuit 616.00 100ECQF3 Filler Plate - Branch Breakers and 150–225AUltimate Main Breaker (bag of 5)14.20 5QF3 Filler Plate - Branch Breakers and 150–225AUltimate Main Breaker (carton of 100)2.80 1ECMBF125 Filler Plate - 100–125A Ultimate Main Breaker 16.20 1ECRLK250 Gutter Tap Kit - 250-1/0 Main, 250-6 Tap 255.00 3ECSMK1 Spacer Kit 25.00 4ECTS2 Trim Screws (bag of 6 screws) 9.80 6ECDL1 Appliance Labels 6.60 10ECSN1 Extended screws and nuts for use on HC Hubs 10.60 4RAG24Riser Auxilliary Gutter. For use on SiemensLoad Centers 24" or larger362.00 11LOAD CENTERS &CIRCUIT BREAKERS Not suitable for use on 15–50A, 10k AIC type QP circuitbreakers. For use with Ultimate Load Center main breakers. 2 filler plates required for 150–225A mainbreaker opening. Provides 1/4" clearance between wall and load center. For use with Ultimate Load Centers to convert left sideneutral bar into a bounded ground bar, once tie-strap isremoved. The pack quantity is the number of pieces received whenone catalog number is ordered. Example: When oneECQF3 is ordered, a bag of 5 plates is shipped. For a complete list of standby power mechanical interlockkits, see the Standby Generator Section 17.Discount Schedule RESISiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-35

ElectricenterAccessoriesGeneralLOAD CENTERS &CIRCUIT BREAKERS1QT Dual Tie HandleECQTH2QP 2-Pole Tie HandleECQTH3Handle Blocking(Lock Off) Device, ECQL1Padlocking DeviceECPLD1Padlocking DeviceECPLD2Lug Kit, 3-Pole, Subfeed orFeed thru ApplicationsECLK3150Main Breaker Retainer Kit for EQLoad CentersECMBR1Main Breaker Retainer kit for UltimateLoad CentersECMBR2Riser Lug KitECRLK250Ground Bar Kit, ECGB14Neutral Lug Kit, ECLK1-2wire range — #2-1 AWGCu or AlNeutral Lug Kit, ECLK3wire range — #1-300 MCMNeutral Lug Kit, ECLK2wire range — #4-#2/0 AWGCu or AlFor use on Ground Bar onlyCollar Strap, Wire Range;ECCS1; ECCS2Add-A-Lock(Flush Lock) ECQFL1Filler Plate, ECQF3Add-A-Lock(Flush Lock), ECQFL2Ultimate Load CenterMechanical InterlockECQML12Add-A-Lock(Flush Lock), ECQFL3300-400A Load Centers1-36Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

All-Sites Temporary Power Outlet PanelsPower Outlet Panel Types AvailableGeneral1LOAD CENTERS &CIRCUIT BREAKERSSurface▪ Unmetered▪ Ring Type Metered(Meter at top or bottom)▪ Ringless Metered(Meter at top or bottom)▪ LightedEarth Mount Pedestals▪ Unmetered▪ Ring Type (Metered)▪ Ringless Type (Metered)▪ Lighted▪ Cable and Telephone▪ WaterPad Mount Pedestals▪ Unmetered▪ Ring Type (Metered)▪ Ringless Type (Metered)▪ Lighted▪ Cable and Telephone▪ WaterBack to BackEarth Mount Pedestals▪ Unmetered▪ Ring Type (Metered)▪ Ringless Type (Metered)▪ Lighted▪ Cable and Telephone▪ WaterBack to BackPad Mount Pedestals▪ Unmetered▪ Ring Type (Metered)▪ Ringless Type (Metered)▪ Lighted▪ Cable and Telephone▪ WaterSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-37

1LOAD CENTERS &CIRCUIT BREAKERSAll-Sites Temporary Power Outlet PanelsProduct FeaturesEnclosuresRainproofRainproof NEMA Type 3Rconstruction.Quality FinishAll sheet metal components arepowder coated with the highestquality finish and fabricated withG90 galvanized steel.Installation EaseThree raised mounting embossesmake installation a snap.Removable DeadfrontsEasily removable upper and lowerdeadfronts allow easy access tointernal components for ease ofinstallation.Theft ResistantThe padlock provisions and elevatedupper deadfront design preventunauthorized removal of the plugs oraccess to the circuit breakers.Meters Top or BottomMetered units are available withmeters at the top or bottom.▪ Ring and ringless type metercovers available.▪ Utility grade, Landis & Gyr metersocket base.▪ Units with meter at bottom areideally suited for undergroundfeeds.▪ Meter sockets available to 125amps maximum.Removable DoorSloped door allows additional roomfor plugs, and is designed with aestheticforms to add rigidity and sturdiness.Overhead/Underground FeedsSurface devices have provisions foroverhead and underground feeds.▪ For an overhead feed, use areadily available Type RXinterchangeable hub. Closureplate is factory included.▪For an underground feed, anextensive variety of easilyremovable knockouts areprovided.Light OptionLighted option to assist withnighttime site location and operation.Light provisions are the longestlasting and have the lowestoperating cost in the industry.PedestalsOne-Piece ConstructionRigid, one-piece pedestalconstruction for all earth and padmounted devices. Thoroughly testedfor torsion and flexing resistance.Block AssemblyLoop-feed block assembly providesconnectors capable of accepting upto 350 kcmil conductors.(Available on pedestal devices only)Pad MountPad mounted devices areavailable. (not shown)InteriorsBus BarsPlated copper bus bars provide thebest protection against corrosion.Copper ConductorsReady to use! All internal componentsare factory prewired with copperconductors.Circuit ProtectionAll receptacles are protected bylifetime warranted Siemens circuitbreakers.ReceptaclesImpact-resistant, thermoplastic,commercial grade receptacles. Interiors (continued)FeaturesGFCI ProtectionAll 125 volt, 20 amp receptacles haveGFCI protection. Siemens GFCI circuitbreakers are available to provideprotection for 20-50 amp receptacles.Wire ConnectorsAll wire connectors are suitable foruse with copper or aluminum wire.(not shown) 1-38Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

All-Sites Temporary Power Outlet PanelsBuild Your Own Catalog Numbering System1 2 3 4 5 6 7 8 9 10PReference111F22F33F44F55F6F78F99FRECEPTACLERECEPTACLERECEPTACLE CONFIGURATION GFCI14 - 50R 125/250V 50A14 - 30R 125/250V 30ATT30R 125V 30AL6 - 30R 250V 30A6 - 20R 250V 20AL5 - 20R 125V 20A5 - 20R2GFI 125V 20A5 - 20R2 125V 20AL5 - 30R 125V 30A Required fields. For use on Pedestal Devices. All lighted devices require either a 5-20R2GFIreceptacle or a QF120 circuit breaker. For useon unmetered or top metered devices. Devices with two outlets with a total amperageof 60 amps or less have factory ready provisionsfor an additional 1-pole circuit breaker. Deviceswith three outlets with a total amperage of 100amps or less have factory ready provisions foran additional 1-pole circuit breaker. Up to 3 receptacles, and up to 125 Ampsmaximum permissible. The “F” next to the receptacle number denotesGFCI circuit breaker protection.RECEPTACLEMETERU= UnmeteredRT=MeteredRinglessType (Meterat top)T= MeteredRing Type(Meter attop)RB=MeteredRinglessType (Meterat bottom)B= MeteredRing Type(Meter atbottom)X Cable andTelephoneTYPES= SurfaceP= Pedestal(EarthMount)M= Pedestal(PadMount)2B= Pedestal(Back-to-Back, EarthMount)2M= Pedestal(Back-to-Back, PadMount)L LightedEXAMPLE 1: (Catalog No. P1F38FTPXL)Given specifications:▪ 50A, 125/250V receptacle with GFCIcircuit breaker▪ 30A, 125V receptacle with a standardcircuit breaker▪ 20A, 125V receptacle with GFCI circuitbreaker▪ Ring type meter at the top▪ Pedestal mount device▪ Cable and telephone provisions▪ Light optionStep 1Start with the power receptacle productline prefix identifier: (P)Step 2Choose the first receptacle and itscircuit breaker type: (1F)Step 3Choose the second receptacle and itscircuit breaker type: (3)Step 4Choose the third receptacle and itscircuit breaker type: (8F)Step 5Choose the utility grade meter type: (T)Step 6Choose device mounting type: (P)Step 7We have a variety of options you canadd to your panel, including cable andtelephone, and water. Add cable andtelephone option here: (X)Step 8Add the light option here: (L)W WaterK Extra 1-PoleCircuit BreakerProvisionsEXAMPLE 2: (Catalog No. P5F8FUS)Given specifications:▪ 20A, 125V receptacle with GFCI circuitbreaker▪ 20A, 250V receptacle with GFCI circuitbreaker▪ Unmetered▪ Surface deviceStep 1Start with the power receptacle productline prefix identifier: (P)Step 2Choose the first receptacle and itscircuit breaker type: (5F)Step 3Choose the second receptacle and itscircuit breaker type: (7)Step 4Choose the utility grade meter type: (U)Step 5Choose device mounting type: (S)RememberIf the power outlet panel you need isnot listed, you can build your owncatalog number using these three basicguidelines:▪ No more than three receptacles perdevice▪ Total receptacle amperage may notexceed more than 125 amps▪ The receptacles must be configuredfollowing a top to bottom sequencefrom the catalog numbering systemseen on this pageLOAD CENTERS &CIRCUIT BREAKERSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-39

1All-Sites Temporary Power Outlet PanelsMost Common Items—See Previous Page to Build Your Own Catalog NumberUnmetered Surface Mount DevicesSelectionLOAD CENTERS &CIRCUIT BREAKERSCatalog Number List Price $ Meter Type Receptacle #1 Receptacle #2 Receptacle #3P17US 382.00 Unmetered 14-50R (50A) 5-20R2GFI (20A) N/AP77US 333.00 Unmetered 5-20R2GFI (20A) 5-20R2GFI (20A) N/AP1F7US 470.00 Unmetered 14-50R (50A) 5-20R2GFI (20A) N/AP137US 376.00 Unmetered 14-50R (50A) TT30R (30A) 5-20R2GFI (20A)P577US 364.00 Unmetered 6-20R (20A) 5-20R2GFI (20A) 5-20R2GFI (20A)P37US 321.00 Unmetered TT30R (30A) 5-20R2GFI (20A) N/AMetered Surface Mount DevicesCatalog Number List Price $ Meter Type Receptacle #1 Receptacle #2 Receptacle #3P77TS 447.00 Ring Type/Top 5-20R2GFI (20A) 5-20R2GFI (20A) N/AP577TS 553.00 Ring Type/Top 6-20R (20A) 5-20R2GFI (20A) 5-20R2GFI (20A)P1F7TS 639.00 Ring Type/Top 14-50R (50A) 5-20R2GFI (20A) N/AP77RTS 442.00 Ringless/Top 5-20R2GFI (20A) 5-20R2GFI (20A) N/AP1F7RTS 637.00 Ringless/Top 14-50R (50A) 5-20R2GFI (20A) N/AP5F7TS 637.00 Ring Type/Top 6-20R (20A) 5-20R2GFI (20A) N/AP77BS 427.00 Ring Type/Bottom 5-20R2GFI (20A) 5-20R2GFI (20A) N/AP177RBS 612.00 Ringless/Bottom 14-50R (50A) 5-20R2GFI (20A) 5-20R2GFI (20A)P77RBS 578.00 Ringless/Bottom 5-20R2GFI (20A) 5-20R2GFI (20A) N/AP5F77RBS 729.00 Ringless/Bottom 6-20R (20A) 5-20R2GFI (20A) 5-20R2GFI (20A)P1F77RBS 729.00 Ringless/Bottom 14-50R (50A) 5-20R2GFI (20A) 5-20R2GFI (20A)P17RBS 549.00 Ringless/Bottom 14-50R (50A) 5-20R2GFI (20A) N/AMetered and Unmetered Pedestal DevicesCatalog Number List Price $ Enclosure Type Meter Type Receptacle #1 Receptacle #2 Receptacle #3P137UP 722.00 Pedestal Earth Mount Unmetered 14-50R (50A) TT30R (30A) 5-20R2GFI (20A)P37UP 568.00 Pedestal Earth Mount Unmetered TT30R (30A) 5-20R2GFI (20A) N/AP137RTP 805.00 Pedestal Earth Mount Ringless 14-50R (50A) TT30R (30A) 5-20R2GFI (20A)P137TP 783.00 Pedestal Earth Mount Ring Type 14-50R (50A) TT30R (30A) 5-20R2GFI (20A)P1F37UML 1173.00 Pedestal Earth Mount Unmetered 14-50R (50A) TT30R (30A) 5-20R2GFI (20A)P137RT2B 1101.00Pedestal Earth MountBack to BackRingless 14-50R (50A) TT30R (30A) 5-20R2GFI (20A)P137U2B 1170.00Pedestal Earth MountBack to BackUnmetered 14-50R (50A) TT30R (30A) 5-20R2GFI (20A)1-40Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Temporary Power Outlet PanelsStandard Knockout PatternTopRX.75” & 1” K.O.Bottom.25” K.O. .75”, 1” & 1.5”K.O.The knockout diagramshown at left is tobe referenced for allsurface mount devices9.50Dimension Drawings9.501LOAD CENTERS &CIRCUIT BREAKERS9.5029.1323.4016.10SURFACE6.136.13LIGHTED SURFACE6.13METERED SURFACE'A'6.136.13ANBANB84.6377.3819.2519.25GRADEGRADE24.0024.00METERED LIGHTED PEDESTALMETERED PEDESTALSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-41

Temporary Power Outlet PanelsDimension Drawings9.501LOAD CENTERS &CIRCUIT BREAKERS9.506.1347.50ANB19.2553.38ANB6.13UNMETERED LIGHTED PADMOUNT PEDESTAL9.5019.256.13METERED PAD MOUNTPEDESTALAN B40.2519.25UNMETERED PAD MOUNTPEDESTAL1-42Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Temporary Power Outlet PanelsDimension Drawings9.509.509.501A N B6.1336.38LOAD CENTERS &CIRCUIT BREAKERS6.13ANB19.2564.3019.2571.50GRADEGRADE6.13METER LIGHTED SURFACE24.009.5024.00UNMETERED PEDESTAL27.88UNMETERED LIGHTED PEDESTAL9.506.13METER AT BOTTOM SURFACE12.50A N B43.2519.25UNMETERED PAD MOUNTBACK-TO-BACK-PEDESTALSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-43

Temporary Power Outlet PanelsDimension Drawings19.509.50LOAD CENTERS &CIRCUIT BREAKERS12.50ANB12.5087.63ANB80.3819.2519.25GRADEGRADE24.0024.00METERED LIGHTEDBACK-TO-BACK PEDESTALMETERED BACK-TO-BACKPEDESTAL9.509.50ANB12.50ANB12.5019.2574.5019.2567.25GRADEGRADE24.0024.00UNMETERED LIGHTEDBACK-TO-BACK PEDESTALUNMETERED BACK-TO-BACKPEDESTAL1-44Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Temporary Power Outlet PanelsDimension Drawings9.509.501LOAD CENTERS &CIRCUIT BREAKERS12.50ANB12.5087.63ANB80.3819.2519.25GRADEGRADE24.0024.00METERED LIGHTEDBACK-TO-BACK PEDESTALMETERED BACK-TO-BACKPEDESTAL9.509.5012.50ANB12.50ANB19.2574.5019.2567.25GRADEGRADE24.0024.00UNMETERED LIGHTEDBACK-TO-BACK PEDESTALUNMETERED BACK-TO-BACKPEDESTALSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 1-45

NotesLOAD CENTERS &CIRCUIT BREAKERS11-46Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

2SPEEDFAX TM 2007-2008 Meter CentersContentsSingle and Multiple Meter SocketsGeneral Information 2-2Bypass Type Meter Sockets 2-3Residential Meter Sockets 2-4 – 2-6Commercial Meter Sockets 2-7 – 2-9Accessories—Selection 2-10Knockout Diagrams 2-11 – 2-17Meter Main and Meter Load Center CombinationsCatalog Number Logic 2-18Surface Mount Meter Mains, 1ø, 3-Wire 120/240V AC 2-19 – 2-21EUSERC-Approved Meter-Main & Meter-Load Centers 100 – 200A 2-22EUSERC-Approved Meter-Load Centers 200 – 225A 2-23EUSERC-Approved Meter-Load Centers 250A 2-24EUSERC-Approved Meter-Load Centers 300 – 400A 2-25Electricenter Accessories 2-26Dimensions, Wiring Schematics, Knockout Codes 2-27 – 2-37Modular MeteringResidential and Commercial 2-38 – 2-39Series Ratings Chart 2-40Service Entrance Modules—Selection 2-41 – 2-43Residential Meter Modules—Ring and Ringless Style 2-44 – 2-45Commercial Meter Modules 2-46 – 2-51Wiring and Knockout Diagrams 2-52 – 2-69Uni-Pak Meter CentersGeneral Information 2-70Ring Style Meter Centers (100,000A IR) 2-71Ringless Style Meter Centers (100,000A IR) 2-72Ring Style Meter Centers Lever Bypass 2-73Uni-Pak Accessories 2-74Wiring Diagrams—125A, 200A 2-75Knockout Diagrams 2-76 – 2-80Modular and Uni-Pak Metering Accessories 2-81Modular Metering Replacement Parts Kits 2-82Modular Meter Lug Data & Bus Duct Units 2-83EUSERC—Commercial Type By Meter Main Combinations 2-84EUSERC—Commercial Type By Load Center Combinations 2-85EUSERC—Wiring Diagrams 2-86EUSERC—Dimensions & Knockout Diagrams 2-872 METERCENTERSResidential Commercial Industrial

Meter CentersMeter Mounting DevicesGeneralGeneral Information2METERCENTERSMaterials:16 gauge, galvanized steel, G-90Enclosures:NEMA 3RFinish:Steel - Light gray, baked on powderpolyesterLatches:All swing latches are stainless steelBlock Material:Glass reinforced polyesterTerminals:Residential - Tin-plated aluminumextrusions 6061-T6Commercial - Tin-plated copper andor tin plated aluminumAccessories:All hubs, closure plates, and 5thterminals, if included, are factoryinstalled.Standards:Products cataloged herein meet orexceed the following standards:UL 486B, UL 414, NEMA 250,ANSI C12.7 UL File #30413Siemens meter mounting devices utilizethe high quality Landis & Gyr designknown throughout the utility industry formore than 50 years. Siemens metersockets are built for safety, ease ofinstallation, and long term quality. That iswhy we use stainless steel hardware,polyester powder coat paint for longlasting protection, and Type G-90galvanized steel for all of our enclosures.It is also why we use an all-coppercurrent path in our commercial sockets.All of this means that the Siemens’Landis & Gyr brand is recognizedthroughout the industry as the qualityleader.Features:▪ All enclosures feature type G90galvanized steel with a durablepolyester powder coat finish▪ Residential single position sockets(types SUAT) feature a quad neutral asa standard feature▪ Most commercial sockets includea ground lug & some models areavailable with line & load lugs installed▪ Lever bypass sockets feature theLandis & Gyr type HQ socket which isrecognized by utilities as the industrystandard for durability & quality▪ Siemens features one of the mostcomplete and comprehensive metersocket lines available from anymanufacturerSUAS877-PPZA4-Jaw 1ø 3W 200 Amp Residential HornBypass - Sidewire DesignS40407-02CO7-Jaw 3ø 4W 200 Amp LeverBypass Type “HQ”S48707-82GP7-Jaw 3ø 4W 320 Amp Lever BypassType HQ - Sidewire DesignSUAT417-XG4-Jaw 1ø 3W 200 Amp Residential -No Bypass2-2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersMeter Socket Bypass TypesGeneralThere are several different bypass types used in the meter socket industry. The type of bypass used is dependent upon eachindividual utilities’ requirements for that application. The illustrations and photos below will explain some of the basic bypasstypes seen in section 2 of the Siemens’ speedfax. This page is meant for informative purposes only and is not meant to implyor convey the use of any particular bypass or inter-changing of any types of bypass for any application. The local utility shouldalways be contacted to ensure approval of equipment prior to installation. The types of bypasses listed below are for utilityuse only.Horn Bypass:Small tabs or “horns” on the line and load side of the meter socket act as electricalconnection points for the utility to install a bypassing means- usually a speciallyproduced wire or “jumper” designed for this specific application.2 METERCENTERSLever Bypass:A lever is used to rotate a plated copper blade between the line and load jaws. TheLandis & Gyr lever bypass HQ socket also clamps on the meter when the bypass isdis-engaged. The bypass must be engaged to remove the meter then dis-engagedafter the meter is installed. The bypass acts as an alternate path for current flowwhich helps to mitigate any arcing if the meter is being removed. This also ensures aconstant current flow should the meter need to be removed.Test Block Bypass:Test Block Bypass sockets (TBB) have the line and load connectors mounted parallelto one another. This provides for a provision to bypass the meter by placing a jumperon the line and load bus. Note that this type of bypass is used primarily by thoseutilities subscribing to the EUSERC metering standards.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog2-3

Meter CentersSingle Position Meter Sockets—Residential Types SelectionMETERCENTERS2SUAT111-0PGPSUAT111-0GFSUAT111-0MXA135 Amp Continuous Meter Mounting Equipment, Ringless Type, 1-Phase, 3-Wire 600V 1 PositionCatalog Dimensions (inches) Cont. No. of 5th KO ListNumber H W D Amps Service Lugs Jaws Jaw Hub Fig. Notes Price $HORN BYPASSSUAT111-0PZA 11.7 8.0 3.7 135 OH/UG #14-2/0 4 EC659-0121 RX Opening 1 99.05SUAT111-0PDN 11.7 8.0 3.7 135 OH/UG #14-2/0 4 EC659-0121 RX Opening 1 106.50SUAT111-0PGP 11.7 8.0 3.7 135 OH/UG #14-2/0 4 EC659-0121 RX Opening 1 107.57SUAT111-0PQG 11.7 8.0 3.7 135 OH/UG #14-2/0 4 EC659-0121 RX Opening 1 95.85NO BYPASSSUAT111-0JCA 11.7 8.0 3.7 135 OH/UG #14-2/0 4 EC659-0121 RX Opening 1 108.63SUAT111-0G 11.7 8.0 3.7 135 OH/UG #14-2/0 4 EC659-0121 RX Opening 1 104.37SUAT111-PG 11.7 8.0 3.7 135 UG #14-2/0 4 EC659-0121 None 1 99.05SUAT111-0MXA 11.7 8.0 3.7 135 OH/UG #14-2/0 5 Installed RX Opening 1 101.18SUAT111-0GF 11.7 8.0 3.7 135 OH/UG #14-2/0 4 EC659-0121 RX Opening 1 92.66135 Amp Continuous Meter Mounting Equipment, Ring Type, 1-Phase, 3-Wire 600V 1 PositionCatalog Dimensions (inches) Cont. No. of 5th KO ListNumber H W D Amps Service Lugs Jaws Jaw Hub Fig. Notes Price $NO BYPASSSUAT121-0GWR 11.7 8.0 3.7 135 OH/UG #14-2/0 4 EC659-0121 RX Opening 1 103.31SUAT121-BGWR 11.7 8.0 3.7 135 OH #14-2/0 4 EC659-0121 EC38597 Inst. 1 106.50SUAT121-PGWR 11.7 8.0 3.7 135 UG #14-2/0 4 EC659-0121 None 1 99.05SUAT121-BM 11.7 8.0 3.7 135 OH #14-2/0 5 Installed EC38597 Inst. 1 103.31SUAT121-0BCO 11.7 8.0 3.7 135 OH/UG #14-2/0 5 Installed RX Opening 1 108.63SUAT121-BBCO 11.7 8.0 3.7 135 OH #14-2/0 5 Installed EC38597 Inst. 1 107.57SUAT121-PBCO 11.7 8.0 3.7 135 UG #14-2/0 5 Installed None 1 108.63Contact utility or sales office for approval by your local utility prior to installation. Includes 7/16" Barrel lock KO for utility security lock. Includes 7/8" Barrel lock KO for utility security lock. Stainless steel latch and hasp. All devices on this page come with a ground lug. Quadneutrals are standard on every SUAT1, SUAT3, & SUAT4device. Sealing ring included. For Duquense Light & Power. Approved for Florida Meter Group - overhead only. For use in the Consolidated Edison territory.2-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Meter CentersSingle Position Meter Sockets—Residential Types SelectionSUAT417-XGFSUAT317-0PGPSUAS877-PPZA2 METERCENTERS200 Amp Continuous/250 Amp Max Meter Mounting Equipment, Ringless Type, 1-Phase, 3-Wire 600V 1 PositionCatalog Dimensions (inches) Cont. Lugs No. of 5th KO ListNumber H W D Amps Service (kcmil) Jaws Jaw Hub Fig. Notes Price $HORN BYPASSSUAT317-0PGP 14.8 8.0 4.5 200 OH #6-350 4 EC659-0121 RX Opening 2 203.42SUAT317-0PDN 14.8 8.0 4.5 200 OH #6-350 4 EC659-0121 RX Opening 2 202.35SUAT317-0FP 14.8 8.0 4.5 200 OH #6-350 5 Installed RX Opening 2 203.42SUAT317-0PZA 14.8 8.0 4.5 200 OH #6-350 4 EC659-0121 RX Opening 2 138.45SUAT317-0PQG 14.8 8.0 4.5 200 OH #6-350 4 EC659-0121 RX Opening 2 138.45SUAT317-0PCV 14.8 8.0 4.5 200 OH #6-350 4 EC659-0121 RX Opening 2 223.65SUAT417-XPQG 14.8 11.0 4.5 200 OH/UG #6-350 4 EC659-0121 RX CL. Plate 3A 187.44SUAT417-XFP 14.8 11.0 4.5 200 OH/UG #6-350 5 Installed RX CL. Plate 3A 203.42SUAT417-0PQG 14.8 11.0 4.5 200 OH/UG #6-350 4 EC659-0121 RX Opening 3A 214.07SUAS877-PPDN 14.0 13.0 5.1 200 UG-SW #6-350 4 EC659-0121 None 6 264.12SUAS877-PPZA 14.0 13.0 5.1 200 UG-SW #6-350 4 EC659-0121 None 6 267.32SUAS877-PPGP 14.0 13.0 5.1 200 UG-SW #6-350 5 EC659-0121 None 6 275.84SUAS877-PPZ 14.0 13.0 5.1 200 UG-SW #6-350 4 EC659-0121 None 6 264.12SUAS817-PPGP 14.0 13.0 5.1 200 UG-SW #6-350 4 EC659-0121 None 8 275.84SUAS877-PPCV 14.0 13.0 5.1 200 UG-SW #6-350 4 EC659-0121 None 8 290.75NO BYPASSSUAT317-0MXA 14.8 8.0 4.5 200 OH #6-350 5 Installed RX Opening 2 203.42SUAT317-0GF 14.8 8.0 4.5 200 OH #6-350 4 EC659-0121 RX Opening 2 161.88SUAT317-0G 14.8 8.0 4.5 200 OH #6-350 4 EC659-0121 RX Opening 2 146.97SUAT317-DGZ 14.8 8.0 4.5 200 OH #6-350 4 EC659-0121 EC38599 Inst. 2 131.00SUAT417-XGDU 14.8 11.0 4.5 200 OH/UG #6-350 4 EC659-0121 RX CL. Plate 3A 204.48SUAT417-XGF 14.8 11.0 4.5 200 OH/UG #6-350 4 EC659-0121 RX CL. Plate 3A 138.45SUAT417-XG 14.8 11.0 4.5 200 OH/UG #6-350 4 EC659-0121 RX CL. Plate 3A 192.77SUAT417-PG 14.8 11.0 4.5 200 UG #6-350 4 EC659-0121 None 3B 103.31SUAT517-PDG 19.0 13.5 5.1 200 UG #6-350 4 EC659-0121 None 4 166.14SUAT618-XGNM 22.0 11.0 4.5 200 OH/UG #6-350 4 EC659-0121 RX CL. Plate 5 320.57SUAS877-PG 14.0 13.0 5.1 200 UG-SW #6-350 4 EC659-0121 None 6 264.12SUAS818-PGNM 14.0 13.0 5.1 200 UG-SW #6-350 4 EC659-0120 None 8 280.10SUAS917-XJCA 17.0 13.0 5.1 200 OH/UG-SW #6-350 4 EC659-0121 RX CL. Plate 7 285.42200 Amp Continuous/250 Amp Max Meter Mounting Equipment, Ring Type, 1-Phase, 3-Wire 600V 1 PositionCatalog Dimensions (inches) Cont. No. of 5th KO ListNumber H W D Amps Service Lugs Jaws Jaw Hub Fig. Notes Price $NO BYPASSSUAT327-0MCO 14.8 8.0 4.5 200 OH #6-350 5 Installed RX Opening 2 140.58SUAT327-0GWR 14.8 8.0 4.5 200 OH #6-350 4 EC659-0121 RX Opening 2 123.00SUAT427-PMCO 14.8 11.0 4.5 200 UG #6-350 5 Installed None 3B 174.66SUAT427-XMWR 14.8 11.0 4.5 200 OH/UG #6-350 4 EC659-0121 RX CL. Plate 3A 161.88Contact utility or sales office for approval by your local utility prior to installation. Includes 7/16" Barrel lock KO for utility security lock. Includes 7/8" Barrel lock KO for utility security lock. Stainless steel latch and hasp. A quad neutral is standard on all SUAT1, SUAT3, &SUAT4 devices. Device has line side studs. For use in theNiagra-Mohawk territory. Sealing ring included. For use in the Consolidated Edison territory. For use in the Florida Meter Group territory. “-SW” indicates an offset or side wire design. Meter ison right. May be used for overhead services in the EUSERCterritories. For Duquense Light & Power. “-SW” indicates an offset or side wire design. Meter ison left. For use on the Atlantic Electric & Delmarva Service areasonly.Discount Schedule RESI Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-5

Meter CentersSingle & Multiple Position Meter Sockets—Residential TypesSelection2METERCENTERSSUA2311-0PGP with EC659-0121 installedWSC250CSUA2717-YPGP100 Amp/Position Meter Mounting Equipment, Ringless Type, 1-Phase, 3-Wire 300V Multi-Position Catalog Dimensions (inches) Bus Cont. No. of No. of 5th KO Line Load ListNumber H W D Amps Amps Service Pos. Jaws Jaw Hub Notes Fig. Lugs Lugs Price $HORN BYPASSSUA2311-0PGP 12.0 24.0 4.5 100 100 OH/UG 2 4 EC659-0121 RX Opening 16 #6-350 #14-2/0 324.83SUA2311-0PQG 12.0 24.0 4.5 100 100 OH/UG 2 4 EC659-0121 RX Opening 16 #6-350 #14-2/0 347.19SUA3311-0PGP 12.0 32.0 4.5 135 100 OH/UG 3 4 EC659-0121 RX Opening 17 #6-350 #14-2/0 455.82SUA3311-0PQG 12.0 32.0 4.5 135 100 OH/UG 3 4 EC659-0121 RX Opening 17 #6-350 #14-2/0 477.12SUA4311-0PGP 12.0 40.0 4.5 180 100 OH/UG 4 4 EC659-0121 RX Opening 18 #6-350 #14-2/0 590.01SUA4311-0PQG 12.0 40.0 4.5 180 100 OH/UG 4 4 EC659-0121 RX Opening 18 #6-350 #14-2/0 610.25200 Amp/Position Meter Mounting Equipment, Ringless Type, 1-Phase, 3-Wire 300V Multi-Position Dimensions (inches) Line LoadCatalog Bus Cont. No. of No. of 5th KO Lugs Lugs ListNumber H W D Amps Amps Service Pos. Jaws Jaw Hub Notes Fig. (kcmil) (kcmil) Price $HORN BYPASSSUA2717-YPDN 14.5 24.0 5.1 200 200 OH/UG 2 4 EC659-0121 HD Opening 19 #1/0-600 #6-350 337.61SUA2717-YPGP 14.5 24.5 5.1 200 200 OH/UG 2 5 Installed HD CL. Plate 19 #1/0-600 #6-350 337.61SUA2717-YPQG 14.5 24.0 5.1 200 200 OH/UG 2 4 EC659-0121 HD Opening 19 #1/0-600 #6-350 358.91SUA2717-YPZA 14.5 24.0 5.1 200 200 OH/UG 2 4 EC659-0121 HD Opening 19 #1/0-600 #6-350 337.61SUA3717-YPDN 14.5 32.0 5.1 270 200 OH/UG 3 4 EC659-0121 HD Opening 20 #1/0-600 #6-350 498.42SUA3717-YPGP 14.5 33.3 5.1 270 200 OH/UG 3 5 Installed HD CL. Plate 20 #1/0-600 #6-350 498.42SUA3717-YPZA 14.5 32.0 5.1 270 200 OH/UG 3 4 EC659-0121 HD Opening 20 #1/0-600 #6-350 498.42SUA4719-YPDN 14.5 43.0 5.1 360 200 OH/UG 4 4 EC659-0121 HD Opening 21 (2)#1/0-600 #6-350 597.47SUA4719-YPGP 14.5 43.0 5.1 360 200 OH/UG 4 5 Installed HD CL. Plate 21 (2)#1/0-600 #6-350 597.47SUA4719-YPQG 14.5 43.0 5.1 360 200 OH/UG 4 4 EC659-0121 HD Opening 21 (2)#1/0-600 #6-350 617.70SUA4719-YPZA 14.5 43.0 5.1 360 200 OH/UG 4 4 EC659-0121 HD Opening 21 (2)#1/0-600 #6-350 597.47SUA5719-KPGP 14.5 51.0 5.1 450 200 OH/UG 5 4 EC659-0121 2-HD Opening 22 (2)#1/0-600 #6-350 687.99SUA5719-KPDN 14.5 51.0 5.1 450 200 OH/UG 5 4 EC659-0121 2-HD Opening 22 (2)#1/0-600 #6-350 772.13SUA6719-KPQG 14.5 59.0 5.1 528 200 OH/UG 6 4 EC659-0121 2-HD Opening 23 (2)#1/0-600 #6-350 1082.04SUA6719-KPZA 14.5 59.0 5.1 528 200 OH/UG 6 4 EC659-0121 2-HD Opening 23 (2)#1/0-600 #6-350 1082.04100/80 Amp/Position Meter Mounting Equipment, Ring Type, 1-Phase, 3-Wire 300V Multi-PositionDimensions (inches) Line LoadCatalog Bus Cont. No. of No. of 5th KO Lugs Lugs ListNumber H W D Amps Amps Service Pos. Jaws Jaw Hub Notes Fig. (kcmil) (kcmil) Price $NO BYPASSWSC150C 11.3 15.3 3.8 - 80 OH/UG 1 5 WSX019 1.25" KO 24 #6-4/0 #8-2/0 165.00WSC250C 11.3 30.5 3.8 - 80 OH/UG 2 5 WSX019 1.25" KO 25 #6-4/0 #8-2/0 330.00WSC350C 11.3 45.5 3.8 - 80 OH/UG 3 5 WSX019 1.25" KO 26 #6-4/0 #8-2/0 497.00WSN251CR 13.5 16.8 4.1 200 100 OH/UG 2 5 Installed RX CL. Plate 30 #6-250 #8-2/0 404.70WSN351CR 13.5 25.5 4.1 200 100 OH/UG 3 5 Installed RX CL. Plate 31 #6-250 #8-2/0 588.95WSN451CR 13.5 34.1 4.1 200 100 OH/UG 4 5 Installed RX CL. Plate 32 #6-250 #8-2/0 773.19Contact utility or sales office for approval by your local utility prior to installation. Includes 7/16" Barrel lock KO for utility security lock. Includes 7/8" Barrel lock KO for utility security lock. For Duquense Light & Power. Ground lug included. (2) Ground lugs included. Sealing ring included. Unit is unbussed and indoor. Center feed. End feed. Devices are gangable. Use strap #WSX008M to gangdevices together. For use in New York City only(Con Ed).2-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Meter CentersSingle Position Meter Sockets—Commercial/Industrial TypesSelection2 METERCENTERSS40405-02CO S40407-02CO S9804-9142200 Amp Continuous Meter Mounting Equipment, Ringless Type, Lever Bypass, 1-Phase, 3-Wire Catalog Dimensions (inches) Cont. No. of Hub KO ListNumber H W D Amps Service Lugs Jaws Opening Fig. Notes Price $4 OR 5 TERMINALS40404-02QG 19.0 13.0 5.0 200 OH/UG #6-350 kcmil 4 RX CL. Plate 9 431.00S40405-02QG 19.0 13.0 5.0 200 OH/UG #6-350 kcmil 5 RX CL. Plate 9 478.19S40405-015F 19.0 13.0 5.0 200 OH/UG #6-350 kcmil 5 RX CL. Plate 9 473.93S42505-02RG 19.0 13.0 5.0 200 OH/UG 3/8-24 Stud 5 RX CL. Plate 9 463.28S40405-025 19.0 13.0 5.0 200 OH/UG #6-350 kcmil 5 RX CL. Plate 9 459.02S40405-02CO 19.0 13.0 5.0 200 OH/UG #6-350 kcmil 5 RX CL. Plate 9 459.02S40405-0BNU 28.0 13.0 5.0 200 OH/UG #6-350 kcmil 5 RX Opening 9 448.37S48805-0BNU 22.0 16.0 5.0 200 OH/UG #6-350 kcmil 5 RX CL. Plate 10 548.48S44305-02CV 19.0 13.0 5.0 200 OH/UG #6-350 kcmil 5 HD CL. Plate 9 578.00200 Amp Continuous Meter Mounting Equipment, Ringless Type, Lever Bypass, 3-Phase, 4-Wire 600VCatalog Dimensions (inches) Cont. No. of Hub KO ListNumber H W D Amps Service Lugs Jaws Opening Fig. Notes Price $7 TERMINALS40007-01GP 17.0 10.0 5.0 200 OH #6-350 kcmil 7 RX Opening 10 594.27S40407-02QG 19.0 13.0 5.0 200 OH/UG #6-350 kcmil 7 RX CL. Plate 9 594.27S40407-025 19.0 13.0 5.0 200 OH/UG #6-350 kcmil 7 RX CL. Plate 9 — 604.92S40407-015F 19.0 13.0 5.0 200 OH/UG #6-350 kcmil 7 RX CL. Plate 9 604.92S40407-02CO 19.0 13.0 5.0 200 OH/UG #6-350 kcmil 7 RX CL. Plate 9 581.49S40407-01NU 19.0 13.0 5.0 200 OH/UG #6-350 kcmil 7 RX Opening 9 532.50S9804-9142 20.0 16.0 5.0 200 UG-SW #6-350 kcmil 7 RX CL. Plate 33 717.81S48807-02NU 22.0 16.0 5.0 200 OH/UG #6-350 kcmil 7 RX CL. Plate 10 630.48S44307-02CV 19.0 13.0 5.0 200 OH/UG #6-350 kcmil 7 HD CL. Plate 9 630.00Contact utility or sales office for approval by your local utility prior to installation. Includes 7/16" Barrel lock KO for utility security lock. Includes 7/8" Barrel lock KO for utility security lock. Stainless steel latch and hasp Ground lug included (2) Ground lugs included Lugs not included, order separately 5-jaw devices can be used for 3-phase 3-wire service ifan isolated neutral kit is used. For use in the Florida Meter Group territory. For use in the Consolidated Edison territory. For use in the Northeast Utilities service area. For use in the Atlantic Electric & Delmarva Service areas.Discount Schedule RESI Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-7

Meter CentersSingle Position Meter Sockets—Commercial/Industrial TypesSelectionMETERCENTERS2S47704-02S48104-02 S9817-8061320 Amp Continuous/400 Amp Max Meter Mounting Equipment, Ringless Type, Lever Bypass, 1-Phase, 3-WireCatalog Dimensions (inches) Cont. No. of Hub KO ListNumber H W D Amps Service Lugs Jaws Opening Fig. Notes Price $4 OR 5 TERMINALS48704-82GP 34.0 20.0 6.0 320 OH/UG-SW #4-600 4 HD CL. Plate 11 719.94S48104-02 31.0 16.0 5.0 320 OH/UG-SW 3/8-24 Stud 4 HD CL. Plate 14 1016.01S48504-92 28.0 13.0 5.0 320 UG 3/8-24 Stud 4 None 35 759.35S47604-81GP 28.0 13.0 5.0 320 OH/UG #4-600 4 HD Opening 12 743.37S47704-02 28.0 14.0 6.0 320 OH/UG 1/2-20 Stud 4 HD CL. Plate 13 787.04S47704-01NU 28.0 14.0 6.0 320 OH/UG 1/2-20 Stud 4 HD Opening 13 647.52S9804-9144 25.0 16.0 6.0 320 OH/UG 3/8-24 Stud 4 HD Opening 13 498.42S9804-9146 34.0 20.0 6.0 320 OH/UG 3/8-24 Stud 4 HD CL. Opening 11 749.76S47605-02SP 28.0 13.0 5.0 320 OH/UG 3/8-24 Stud 5 HD CL. Plate 12 460.08S47705-01NU 28.0 14.0 6.0 320 OH/UG 1/2-20 Stud 5 HD Opening 13 773.19S48105-83BU 31.0 16.0 5.0 320 OH/UG-SW #4-600 5 HD CL. Plate 14 717.81S44704-8265 20.0 34.0 6.0 320 OH/UG-SW #4-600 4 HD CL. Plate 11 1135.29320 Amp Continuous/400 Amp Max Meter Mounting Equipment, Ringless Type, Lever Bypass, 3-Phase, 4-Wire 600VCatalog Dimensions (inches) Cont. No. of Hub KO ListNumber H W D Amps Service Lugs Jaws Opening Fig. Notes Price $7 TERMINALS47707-01NU 28.0 14.0 6.0 320 OH/UG 1/2-20 Stud 7 HD Opening 13 773.19S47707-02 28.0 14.0 6.0 320 OH/UG 3/8-24 Stud 7 HD CL. Plate 14 773.19S48707-82GP 34.0 20.0 6.0 320 OH/UG-SW #4-600 7 HD CL. Plate 11 870.11S9804-9145 25.0 16.0 6.0 320 OH/UG 3/8-24 Stud 7 HD Opening 34 634.74S9804-9147 34.0 20.0 6.0 320 OH/UG 3/8-24 Stud 7 HD Opening 11 890.34400 Amp Continuous/400 Amp Max Meter Mounting Equipment, Ringless Type, No Bypass, 3-Phase, 4-Wire 600VCatalog Dimensions (inches) Cont. No. of Hub KO ListNumber H W D Amps Service Lugs Jaws Opening Fig. Notes Price $7 TERMINAL - Landis & Gyr Type K7 Bolt-in SocketS9817-8061 34.0 20.0 6.0 400 UG 1/2-20 Stud 7 HD CL Plate 15 1917.00Contact utility or sales office for approval by your local utility prior to installation. Includes 7/16" Barrel lock KO for utility security lock. Includes 7/8" Barrel lock KO for utility security lock. Stainless steel latch and hasp. Ground lug included. (2) Ground lugs included. Anti-inversion clip included. Lugs not included, order separately. Bolt-in meter socket. No bypass installed. Lugs should be chosen based on # of cables, size ofwire, and size of stud. See accessories section for moreinformation. “-SW” indicates offset or side wire design. Meter ison right.2-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Meter CentersEUSERC Meter Sockets—Test Block Bypass & Transformer Rated MeteringSelection2 METERCENTERSMS44UTBMS24TBMS14TBRing Type EUSERC-Approved Safety Sockets (Test Block Bypass)CatalogDimensions (inches) Amps No. of Wire Range KO ListNumber L W D Cont. Duty Service Hub Jaws 5th Jaw Cu/AI Fig. Price $MS14TB 24 1 ⁄8 12 3 ⁄8 4 3 ⁄4 1ø-3W RX 4 UX005B 39 545.00MS15TB 24 1 ⁄8 12 3 ⁄8 4 3 ⁄4 100 3ø-3W RX 5 INSTALLED #6-2/0 Box Lug 39 720.00MS17TB 24 1 ⁄8 12 3 ⁄8 4 3 ⁄4 3ø-4W RX 7 — 39 781.00MS24TB 30 1 ⁄8 14 1 ⁄8 6 1 ⁄8 1ø-3W RX 4 UX001WL40 1017.00MS25TB 30#1/0-250 kcmil1 ⁄8 14 1 ⁄8 6 1 ⁄8 200 3ø-3W HC 5 INSTALLED41 1194.00MS27TB 30Lay-in Lug1 ⁄8 14 1 ⁄8 6 1 ⁄8 3ø-4W RX 7 — 40 1343.00MS44UTB 34 1 ⁄2 15 3 ⁄8 6 1 ⁄4 320 1ø-3W HD 4 —(2)1/0-250 kcmil or44 2500.00(1)#4-600 kcmil400 Ampere Transformer Rated CT-Meter Cabinet,(No Disconnect) 600V AC Max. CatalogDimensions (inches)Number Height Width Depth No. of Jaws Hub KO Fig. List Price $1 Phase-3 WireRTU121814 52.00 24.00 11.00 4 — 42 1317.00RTU121815 52.00 24.00 11.00 5 — 42 1329.003 Phase-3 WireRTU121818 52.00 24.00 11.00 8 — 42 1419.003 Phase-3 Wire or 3 Phase-4 WireRT121413 20.00 12.00 4.63 13 RX 43 749.76RTU122015 52.00 36.00 11.00 15 — 42 2192.00RTU121815CT Mounting Bases-400 Amp Max.Catalog Number Service Max. AIC Wire Range List Price $RT6019A 1 Phase/3 Phase-3 Wire 10,000 (2) NEMA Studs 356.00RT6019HA 1 Phase- 3 Wire 50,000 (2) NEMA Studs 447.00RT6067A 3 Phase- 4 Wire 10,000 (2) NEMA Studs 665.00RT6067HA 3 Phase- 4 Wire 50,000 (2) NEMA Studs 779.00Contact utility or sales office for approval by your local utility prior to installation.RT6019A Ground lug included. CT mounting base not included, order from chart below. Includes Test Switch mounting provision, and hubopening for overhead feed.Discount Schedule RESI Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-9

Meter CentersAccessoriesSelectionH56732H58852H56476METERCENTERS2RX HubH58022ECJSS64685-1 Neutral KitEC659-0121S35815-2SRSTDSRSSSRSW5TH & 6TH Jaw AssembliesListFor Use With Catalog Number Price $All SUAxxxx single and multiple position sockets EC659-0121-grounded 18.00All SUAxxxx single and multiple position sockets EC659-0120-insulated 18.53All Lever Bypass single position sockets S35815-2 123.54SC and SD Unbussed Multiple-5th Jaw WSX019 11.40Anti-Inversion clip for use with 320amp sockets H59676 24.50when requiredSealing RingsListDescription Catalog Number Price $Snap-On Type, aluminum SRSTD 17.47Snap-On Type, steel SRSS 19.38Screw Type, aluminum SRSW 25.03Miscellaneous AccessoriesListDescription Catalog Number Price $Insulated Neutral Kit for “S404xx” sockets EC64685 64.00Isolated Neutral Kit for S9817-8061 S69685-1 218.00Bypass Kit for S9817-8061 S69623 132.06Jumper-200 Amp Rated-use on SUAxxx ECJS 36.74sockets onlyPlastic Meter Cover- Ring ECPP 19.00Plastic Meter Cover- Ringless ECCP3 21.00Neutral Isolation kit for 200amp lever 64690-1 34.08bypass socketsInterchangeable HubsHub Size ListDescription Catalog Number (Inches) Price $RX CONDUIT HUBSEC38594 0 3 ⁄4 22.90EC38596 1 37.81EC38597 1 1 ⁄4 37.81EC38598 1 1 ⁄2 23.96EC38599 2 23.96EC38600 2 1 ⁄2 107.57Closure Plate EC38595 — 38.34HC CONDUIT HUBSECHC200 2 72.00ECHC250 2 1 ⁄2 108.00ECHC300 3 175.00Closure Plate ECHC000 — 24.00HD CONDUIT HUBSEC56856 3 178.92EC56857 3 1 ⁄2 263.06EC56858 4 119.28Adapter Plate convert HD to RX EC9747-1113 — 28.76Closure Plate EC56933S — 76.68Lugs for Sockets with Stud Terminals Catalog Number For Use With Wire Range List Price $H58852 Line side of S9817 Socket on UG Applications (1) 3/0-800 kcmil 47.50H56732 Line & Load of S477 & Load/Neutral of S9817 Sockets (2) #4-350 kcmil 35.00H56476 Line & Load of S477 & Load/Neutral of S9817 Sockets (1) 3/0-800 kcmil 44.00H58022 Any socket with 3/8" Stud Terminals (2) #6-250 kcmil 33.00H55890 Any socket with 3/8" Stud Terminals (1) #6-350 kcmil 22.00 Each lug catalog number contains one lug unlessotherwise noted. Order enough lugs to cover allterminations.2-10Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Meter CentersKnockout DiagramsSelection2 METERCENTERSFigure 1 Figure 2 Figure 3KNOCKOUTS (inches):Figure 3B Figure 4: 1/4A: 1/2B: 1/2, 3/4L: 1/2, 3/4, 1, 1-1/4, 1-1/2N: 3/4, 1, 1-1/4, 1-1/2, 2P: 1, 1-1/4R: 1, 1-1/4, 1-1/2, 2S: 1, 1-1/4, 1-1/2, 2, 2-1/2X: 1-1/4, 1-1/2, 2, 2-1/2Z: 1-1/2, 2, 2-1/2EE: 2, 2-1/2, 3GG: 2-1/2, 3, 3-1/2HH: 2-1/2, 3, 3-1/2, 4AB: 1/4, 1/2, 7/8AC: 1/4, 1/2AD: 1-1/4, 1-1/2, 2, 2-1/2, 3AE: 1/4, 1/2, 3/4, 1, 1-1/4AF: 1, 1-1/2, 2, 2-1/2, 3AG: 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3AH: 1/4, 1/2, 3/4AI: 1, 1-1/4, 1-1/2, 2, 2-1/2, 3HD: 4.281 HUB 0PRX: 2.750 HUB 0PSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-11

Meter CentersKnockout DiagramsSelectionMETERCENTERS2Figure 5 Figure 6 Figure 7Figure 8Figure 9 Figure 10KNOCKOUTS (inches):Figure 11 Figure 12: 1/4A: 1/2B: 1/2, 3/4L: 1/2, 3/4, 1, 1-1/4, 1-1/2N: 3/4, 1, 1-1/4, 1-1/2, 2P: 1, 1-1/4R: 1, 1-1/4, 1-1/2, 2S: 1, 1-1/4, 1-1/2, 2, 2-1/2X: 1-1/4, 1-1/2, 2, 2-1/2Z: 1-1/2, 2, 2-1/2EE: 2, 2-1/2, 3GG: 2-1/2, 3, 3-1/2HH: 2-1/2, 3, 3-1/2, 4AB: 1/4, 1/2, 7/8AC: 1/4, 1/2AD: 1-1/4, 1-1/2, 2, 2-1/2, 3AE: 1/4, 1/2, 3/4, 1, 1-1/4AF: 1, 1-1/2, 2, 2-1/2, 3AG: 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3AH: 1/4, 1/2, 3/4AI: 1, 1-1/4, 1-1/2, 2, 2-1/2, 3HD: 4.281 HUB 0PRX: 2.750 HUB 0P2-12Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersKnockout DiagramsSelection2 METERCENTERSFigure 13 Figure 14 Figure 15Figure 16 Figure 17KNOCKOUTS (inches):Figure 18 Figure 19: 1/4A: 1/2B: 1/2, 3/4L: 1/2, 3/4, 1, 1-1/4, 1-1/2N: 3/4, 1, 1-1/4, 1-1/2, 2P: 1, 1-1/4R: 1, 1-1/4, 1-1/2, 2S: 1, 1-1/4, 1-1/2, 2, 2-1/2X: 1-1/4, 1-1/2, 2, 2-1/2Z: 1-1/2, 2, 2-1/2EE: 2, 2-1/2, 3GG: 2-1/2, 3, 3-1/2HH: 2-1/2, 3, 3-1/2, 4AB: 1/4, 1/2, 7/8AC: 1/4, 1/2AD: 1-1/4, 1-1/2, 2, 2-1/2, 3AE: 1/4, 1/2, 3/4, 1, 1-1/4AF: 1, 1-1/2, 2, 2-1/2, 3AG: 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3AH: 1/4, 1/2, 3/4AI: 1, 1-1/4, 1-1/2, 2, 2-1/2, 3HD: 4.281 HUB 0PRX: 2.750 HUB 0PSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-13

Meter CentersKnockout DiagramsSelectionMETERCENTERS2Figure 20Figure 21Figure 22Figure 23Figure 24KNOCKOUTS (inches):Figure 25: 1/4A: 1/2B: 1/2, 3/4L: 1/2, 3/4, 1, 1-1/4, 1-1/2N: 3/4, 1, 1-1/4, 1-1/2, 2P: 1, 1-1/4R: 1, 1-1/4, 1-1/2, 2S: 1, 1-1/4, 1-1/2, 2, 2-1/2X: 1-1/4, 1-1/2, 2, 2-1/2Z: 1-1/2, 2, 2-1/2EE: 2, 2-1/2, 3GG: 2-1/2, 3, 3-1/2HH: 2-1/2, 3, 3-1/2, 4AB: 1/4, 1/2, 7/8AC: 1/4, 1/2AD: 1-1/4, 1-1/2, 2, 2-1/2, 3AE: 1/4, 1/2, 3/4, 1, 1-1/4AF: 1, 1-1/2, 2, 2-1/2, 3AG: 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3AH: 1/4, 1/2, 3/4AI: 1, 1-1/4, 1-1/2, 2, 2-1/2, 3HD: 4.281 HUB 0PRX: 2.750 HUB 0P2-14Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersKnockout DiagramsSelection2 METERCENTERSFigure 26Figure 27Figure 28KNOCKOUTS (inches):Figure 29: 1/4A: 1/2B: 1/2, 3/4L: 1/2, 3/4, 1, 1-1/4, 1-1/2N: 3/4, 1, 1-1/4, 1-1/2, 2P: 1, 1-1/4R: 1, 1-1/4, 1-1/2, 2S: 1, 1-1/4, 1-1/2, 2, 2-1/2X: 1-1/4, 1-1/2, 2, 2-1/2Z: 1-1/2, 2, 2-1/2EE: 2, 2-1/2, 3GG: 2-1/2, 3, 3-1/2HH: 2-1/2, 3, 3-1/2, 4AB: 1/4, 1/2, 7/8AC: 1/4, 1/2AD: 1-1/4, 1-1/2, 2, 2-1/2, 3AE: 1/4, 1/2, 3/4, 1, 1-1/4AF: 1, 1-1/2, 2, 2-1/2, 3AG: 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3AH: 1/4, 1/2, 3/4AI: 1, 1-1/4, 1-1/2, 2, 2-1/2, 3HD: 4.281 HUB 0PRX: 2.750 HUB 0PSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-15

Meter CentersKnockout DiagramsSelectionMETERCENTERS2Figure 30Figure 31Figure 32Figure 33Figure 34Figure 35KNOCKOUTS (inches):.: 1/4A: 1/2B: 1/2, 3/4L: 1/2, 3/4, 1, 1-1/4, 1-1/2N: 3/4, 1, 1-1/4, 1-1/2, 2P: 1, 1-1/4R: 1, 1-1/4, 1-1/2, 2S: 1, 1-1/4, 1-1/2, 2, 2-1/2X: 1-1/4, 1-1/2, 2, 2-1/2Z: 1-1/2, 2, 2-1/2EE: 2, 2-1/2, 3GG: 2-1/2, 3, 3-1/2HH: 2-1/2, 3, 3-1/2, 4AB: 1/4, 1/2, 7/8AC: 1/4, 1/2AD: 1-1/4, 1-1/2, 2, 2-1/2, 3AE: 1/4, 1/2, 3/4, 1, 1-1/4AF: 1, 1-1/2, 2, 2-1/2, 3AG: 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3AH: 1/4, 1/2, 3/4AI: 1, 1-1/4, 1-1/2, 2, 2-1/2, 3HD: 4.281 HUB 0PRX: 2.750 HUB 0P2-16Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersKnockout DiagramsSelectionKNOCKOUTS (inches):Figure 36Figure 37: 1/4A: 1/2B: 1/2, 3/4L: 1/2, 3/4, 1, 1-1/4, 1-1/2N: 3/4, 1, 1-1/4, 1-1/2, 2P: 1, 1-1/4R: 1, 1-1/4, 1-1/2, 2S: 1, 1-1/4, 1-1/2, 2, 2-1/2X: 1-1/4, 1-1/2, 2, 2-1/2Z: 1-1/2, 2, 2-1/2EE: 2, 2-1/2, 3GG: 2-1/2, 3, 3-1/2HH: 2-1/2, 3, 3-1/2, 4AB: 1/4, 1/2, 7/8AC: 1/4, 1/2AD: 1-1/4, 1-1/2, 2, 2-1/2, 3AE: 1/4, 1/2, 3/4, 1, 1-1/4AF: 1, 1-1/2, 2, 2-1/2, 3AG: 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3AH: 1/4, 1/2, 3/4AI: 1, 1-1/4, 1-1/2, 2, 2-1/2, 3HD: 4.281 HUB 0PRX: 2.750 HUB 0P2 METERCENTERSFigure 38Figure 39 Figure 40RXEEJ J JEFigure 41 Figure 42 Figure 43 Figure 44Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-17

Meter CentersCatalog Number LogicCombination Meter SocketsMC 30 40 B 1 200 S E C W2METERCENTERSMain AmpereRatingCircuits(max. No. of circuits)Spaces(max. No. of 1" breakers)1 = 1-Phase3 = 3-PhaseML or L = Main LugMB or B = Main BreakerF/S = Flush / Surface MountingR = Ringless (blank = ring type)J = 5th JawB = Horn BypassE = EUSERC ApprovedD/C = UG Feed Only / OH/UG feedL = Lever Bypass SocketT = Feed Thru LugsW = Wide Load Center DesignM = Field Addable Sub Feed MainH = Double Hub ProvisionMM = Meter MainMC = Meter Load Center Combination2-18Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersSurface Mount Meter Mains, 1-Phase, 3-Wire 120/240V AC▪ UL listed▪ Pad locking provisions on all devices▪ Horn bypass and 5th jaw available as noted▪ Side hinged door with one screw removal where shown▪ Suitable for use only as service entrance equipment▪ Contact local utility to confirm meter socket placementprior to installation▪ See end of section for dimensions and wiring diagramsMM0202ML1100SMM0202ML1125HSelection2 METERCENTERS100A meter main (fieldadded), OH feed only125A meter main(field added)MM0202B1XXXRJBX MM0406L1200X MM0202BXXXMM0404L1400RLM125, 150, and 200A metermain (factory installed), sidehinge door.200A meter main (fieldadded), side hinge door125 and 200A meter mains,side hinge door400A meter main, side hingedoor, provisions for two fieldinstalled mainsOverhead/Underground 1-Phase, 3-Wire SNMeter Main CombinationsUL: EUSERC:Overhead/ Overhead/ ShortDimensions (inches)Ampere Main No. of No. of Under- Under- Circuit Hub 5th Cover List FootRating Breaker Spaces Circuits ground ground Rating Catalog Number Provision Jaw Height Width Depth Type Price $ NotesMain Breaker Field Installed100 QP 2 2 OH OH 10,000 MM0202ML1100S RX EC5J 18.00 7.375 4.00 Ring 366.00 1125 QP 2 2 OH OH 22,000 MM0202ML1125H 2-RX EC5J 17.00 16.00 5.00 Ring 498.00200 1-QN/2-QP 4 6 OH/UG OH 22,000 MM0406L1200H 2-RX EMC5J 19.75 17.125 5.00 Ring 965.00200 1-QN/2-QP 4 6 OH/UG — 22,000 MM0406L1200RH 2-RX EMC5J 19.75 17.125 5.00 Ringless 996.00200 1-QN/2-QP 4 6 OH/UG — 22,000 MM0406L1200RHJB 2-RX Installed 19.75 17.125 5.00 Ringless 1030.00 2(2) QN(R),400 QN(R)H, 2 2 OH/UG — 22,000 MM0404L1400RLM HD S35815-2 29.00 27.00 6.00 Ringless 2923.00 3QP, QPHMain Breaker Factory Installed125 Q2125H 2 2 OH/UG — 22,000 MM0202B1125RJB RX Installed 17.00 16.00 5.00 Ringless 1752.00 2150 QN2150H 2 2 OH/UG — 22,000 MM0202B1150RJB RX Installed 17.00 16.00 5.00 Ringless 1752.00 2150 QN2150H 2 2 OH/UG OH 22,000 MM0202B1150 RX EMC5J 17.00 16.00 5.00 Ring 1736.00150 NEW QN2150H 2 2 OH/UG — 22,000 MM0202B1150R RX EMC5J 17.00 16.00 5.00 Ringless 1736.00200 QN2200H 2 2 OH/UG OH 22,000 MM0202B1200 RX EMC5J 17.00 16.00 5.00 Ring 1752.00200 QN2200H 2 2 OH/UG — 22,000 MM0202B1200R RX EMC5J 17.00 16.00 5.00 Ringless 1736.00200 QN2200H 2 2 OH/UG — 22,000 MM0202B1200RJB RX Installed 17.00 16.00 5.00 Ringless 1752.00 2125 Q2125H 2 2 OH/UG OH/UG 22,000 MM0202B1125RJBX RX Installed 17.00 18.42 5.14 Ringless 1752.00 2, 3150 QN2150H 2 2 OH/UG OH/UG 22,000 MM0202B1150RJBX RX Installed 17.00 18.42 5.14 Ringless 1752.00 2, 3200 QN2200H 2 2 OH/UG OH/UG 22,000 MM0202B1200RJBX RX Installed 17.00 18.42 5.14 Ringless 1752.00 2, 3For inches / millimeters conversion,see Application Data section.Listed by Underwriters‘ Laboratories, Inc., under file#E10703 vol. 1. Shipped standard with two units per carton.Each unit supplied with 1.25" hub. Device has horn bypass. Devices with “X” suffix include an extra wide utilitysection.Discount Schedule RESI Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-19

2METERCENTERSMeter CentersNEWSurface Mount Meter Load Centers, 1-Phase, 3-Wire 120/240V AC 150-200A▪ UL listed▪ Overhead and underground feed applications▪ Underground feed accomplished by use of removable gutter trough▪ Load wires bottom or back exit only▪ 22,000 AIC rated▪ Pad locking provisions on all devices▪ Side hinge doors removable by backing out only one screw▪ Suitable for use only as service entrance equipment▪ RX type hub provision on top end wall▪ HC type hub provision on bottom end wall▪ Field addable 5th Jaw (EC5J2)▪ Contact local utility to confirm meter socket placement prior toinstallation▪ See end of section for dimensions and wiring diagramsSelectionMC0606L1200R (Shown)MC0606L1200RJBMC0606L1200RAMC0408B1150T (Shown)MC0408B1200TMC0408B1150RTMC0408B1200RTMC0816B1150CT (Shown)MC0816B1200CTMC0816B1150RCTMC0816B1200RCTMC2040B1150RC (Shown)MC2040B1200RCMC2040B1150RJBCMC2040B1200RJBC200A, main lug, 6 circuit(Twelve 1" spaces), for usewith up to six 2-pole breakers150 or 200A, main breaker,four 1" spaces, feed thrulugs provided150 or 200A, main breaker,eight 1" spaces, feed thrulugs provided150 or 200A, main breaker,twenty 1" spaces providedAmpere Main No. of No. of Replaced Dimensions Cover ListRating Breaker Spaces Circuits Catalog Number Catalog Number Height Width Depth Type Price $ Notes150 MBK150 4 8 MC0408B1150T MC0408MB1150T 30.0 14.0 5.0 Ring 1318.00 3150 MBK150 4 8 MC0408B1150RT MC0408MB1150RT 30.0 14.0 5.0 Ringless 1318.00 3150 MBK150 8 16 MC0816B1150CT — 32.0 14.0 5.0 Ring 1387.00 3150 MBK150 8 16 MC0816B1150RCT — 32.0 14.0 5.0 Ringless 1387.00 3150 MBK150 20 40 MC2040B1150RC MC2040MB1150R 36.0 14.0 5.0 Ringless 2540.00 3150 MBK150 20 40 MC2040B1150RJBC — 36.0 14.0 5.0 Ringless 2522.00 3, 5200 — 12 6 MC0606L1200R MC0606ML1200R 27.0 14.0 5.0 Ringless 1188.00 1, 2, 3200 — 12 6 MC0606L1200RJB MC0606ML12RB 27.0 14.0 5.0 Ringless 1216.00 1, 2, 3, 5200 — 12 6 MC0606L1200RA — 27.0 14.0 5.0 Ringless 1250.00 1, 2, 3, 4200 MBK200 4 8 MC0408B1200T MC0408MB1200T 30.0 14.0 5.0 Ring 1318.00 3200 MBK200 4 8 MC0408B1200RT MC0408MB1200RT 30.0 14.0 5.0 Ringless 1318.00 3200 MBK200 8 16 MC0816B1200CT — 32.0 14.0 5.0 Ring 1387.00 3200 MBK200 8 16 MC0816B1200RCT — 32.0 14.0 5.0 Ringless 1387.00 3200 MBK200 20 40 MC2040B1200RC MC2040MB1200R 36.0 14.0 5.0 Ringless 2540.00 3200 MBK200 20 40 MC2040B1200RJBC — 36.0 14.0 5.0 Ringless 2522.00 3Notes:1. No main breaker provided. Accept QN or QP type 2 or4-pole breakers.2. Suitable for use as service entrance equipment whennot more than six disconnecting means are providedand when not used as a lighting an appliance panelboard.3. Due to wire space restrictions on the trough side, theleft side of the interior is limited to a 60A max branch.4. Aluminum enclosure.5. Horn bypass and 5th jaw included.2-20Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Meter CentersSurface Mount Meter Load Centers, 1-Phase, 3-Wire 120/240V AC 100-200A▪ UL listed▪ 22,000 AIC Rated▪ Pad locking provisions on all devices▪ Side hinge doors removable by backing out only one screw▪ Suitable for use only as service entrance equipment▪ Contact local utility to confirm meter socket approval prior to installation▪ See end of section for dimensions and wiring diagramsMC0816B1XXXH200A OH/UG feed, 8 circuit,with feed thru lugs.MC0816B1XXXTSelection200A Trailer Panel,OH feed only, 8 circuitswith feed thru lugs.2 METERCENTERSMC2040B1150(R)/MC2040B1200(R)/MC1224B1125MC0816B1400RLTM/MC0816B1350RLTM200A, 20 Circuit, Side bySide Meter ComboOne factory installed main,provisions for up to 200Afield installed main, 8 circuits.Overhead/Underground: 1-Phase, 3-Wire SN (22,000A IR)Meter Load Center CombinationsUL: EUSERC:Overhead/ Overhead/Dimensions (inches)Ampere Main No. of No. of Under- Under- Hub 5th Cover List FootRating Breaker Spaces Circuits ground ground Catalog Number Provision Jaw Height Width Depth Type Price $ Notes125 Q2125H 12 24 OH/UG — MC1224B1125 RX EMC5J 16.00 22.89 5.00 Ring 1620.00 2125 EQ9675R 12 24 OH/UG — MC1224MB1125R HS EC5J 34.00 14.12 5.00 Ringless 1620.00 2150 QN2150RH 8 16 OH — MC0816B1150T RX — 29.00 12.00 5.12 Ring 1387.00 1, 3150 QN2150RH 8 16 OH/UG — MC0816B1150TH 2-RX EMC5J 21.00 22.89 5.00 Ring 1360.00 1, 3150 QN2150RH 8 16 OH/UG — MC0816B1150RTH 2-RX EMC5J 21.00 22.89 5.00 Ringless 1360.00 1, 3150 QN2150RH 20 40 OH/UG — MC2040B1150 RX EMC5J 18.00 22.89 5.00 Ring 2585.00 2150 QN2150RH 20 40 OH/UG — MC2040B1150R RX EMC5J 18.00 22.89 5.00 Ringless 2522.00 2200 QN2200RH 8 16 OH — MC0816B1200T RX — 29.00 12.00 5.12 Ring 1387.00 1, 3200 QN2200RH 8 16 OH — MC0816B1200RT RX — 29.00 12.00 5.12 Ringless 1387.00 1, 3200 QN2200RH 8 16 OH/UG — MC0816B1200TH 2-RX EMC5J 21.00 22.89 5.00 Ring 1360.00 1, 2200 QN2200RH 8 16 OH/UG — MC0816B1200RTH 2-RX EMC5J 21.00 22.89 5.00 Ringless 1360.00 1, 2200 QN2200RH 20 40 OH/UG — MC2040B1200 RX EMC5J 18.00 22.89 5.00 Ring 2585.00 2200 QN2200RH 20 40 OH/UG — MC2040B1200R RX EMC5J 18.00 22.89 5.00 Ringless 2522.00 2350 QN2150H 8 16 OH/UG — MC0816B1350RLTM HD — 29.00 27.00 6.00 Ringless 3940.00 1400 NEW QN2200H 4 8 OH/UG — MC0408B1400RLTM HD — 29.00 27.00 6.00 Ringless 3591.00 1400 QN2200H 8 16 OH/UG — MC0816B1400RLTM HD — 29.00 27.00 6.00 Ringless 3940.00 1 Feed thru lugs included. Side by side design for OH/UG applications. Over/under design for OH applications.Discount Schedule RESI Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-21

2METERCENTERSMeter CentersEUSERC Meter Main & Meter Load Centers (100-200A) Single Phase, 3-Wire 240V AC▪ UL listed▪ For overhead and underground feed applications▪ Designed to meet EUSERC standards▪ 22,000 AIC Rated▪ Pad locking provisions on all devices▪ Surface and semi-flush units available - semi flush railsare depth adjustable for 2x6 studs▪ Side hinge door removable by backing out only one screw▪ Load wiring may exit top or bottom▪ Suitable for use only as service entrance equipment▪ RX type hub provision on top endwall, HC type hubprovision on bottom endwall▪ 5th jaw accessory available (ECMC5J)▪ Ring type meter covers▪ Contact local utility to confirm meter socket approval prior to installation▪ See end of section for dimensions and wiring diagramsMM0406L1125SEC (shown)MM0406L1125FEC125A Max, main lug metermain, between the studsconstructionSelectionMM0406L1200SEC (shown)MM0406L1200FEC200A Max, main lug metermain, between the studsconstructionMC0816B1200SCTM (shown)MC0816B1200FCTMMC1224B1100SEC (shown)MC1224B1100FECMC1224B1125SECMC1224B1125FECMC2442B1XXXSEC (shown)MC2442B1XXXFECMC4040B1200SECW (shown)MC3040B1200SECW200A Pump Panel, OH/UGFeed, 8 circuits with feed thrulugs, and provisions for up to50A second main breaker100 and 125 Amp, 12 circuit,between the studsconstruction200 and 225 Amp, 24 circuit,between the studsconstruction200A, Wide Load CenterDesign, Meter ComboAmps Main No. of Max. Dimensions ListMax. Breaker Mounting Spaces Circuits Service Catalog Number Height Width Depth Price $100 Q2100H Flush 12 24 OH/UG MC1224B1100FEC 26 9 ⁄16 14 1 ⁄2 7 1 ⁄2 976.00100 Q2100H Surface 12 24 OH/UG MC1224B1100SEC 26 9 ⁄16 14 1 ⁄2 7 1 ⁄2 976.00100 Q2100H Flush 16 32 OH/UG MC1632B1100FEC 30 9 ⁄16 14 1 ⁄2 7 1 ⁄2 818.00100 Q2100H Surface 16 32 OH/UG MC1632B1100SEC 30 9 ⁄16 14 1 ⁄2 7 1 ⁄2 818.00125 Q2125H Flush 12 24 OH/UG MC1224B1125FEC 26 9 ⁄16 14 1 ⁄2 7 1 ⁄2 1668.00125 Q2125H Surface 12 24 OH/UG MC1224B1125SEC 26 9 ⁄16 14 1 ⁄2 7 1 ⁄2 1667.00125 Q2125H Flush 16 32 OH/UG MC1632B1125FEC 30 9 ⁄16 14 1 ⁄2 7 1 ⁄2 1743.00125 QP, QPH Flush 4 6 OH/UG MM0406L1125FEC 26 9 ⁄16 14 1 ⁄2 7 1 ⁄2 515.00125 QP, QPH Surface 4 6 OH/UG MM0406L1125SEC 26 9 ⁄16 14 1 ⁄2 7 1 ⁄2 515.00200 EQ9985 Surface 8 16 OH/UG MC0816B1200SCTM 40 9 ⁄16 14 1 ⁄2 7 1 ⁄2 1711.00200 NEW EQ9985 Flush 8 16 OH/UG MC0816B1200FCTM 40 9 ⁄16 14 1 ⁄2 7 1 ⁄2 1711.00200 EQ9985 Flush 24 48 OH/UG MC2442B1200FEC 40 9 ⁄16 14 1 ⁄2 7 1 ⁄2 2600.00200 EQ9985 Surface 24 48 OH/UG MC2442B1200SEC 40 9 ⁄16 14 1 ⁄2 7 1 ⁄2 2600.00200 QN, QNH, QP, QPH Flush 4 6 OH/UG MM0406L1200FEC 30 9 ⁄16 14 1 ⁄2 7 1 ⁄2 1756.00200 QN, QNH, QP, QPH Surface 4 6 OH/UG MM0406L1200SEC 30 9 ⁄16 14 1 ⁄2 7 1 ⁄2 1804.00200 QN2200RH Surface 30 40 OH/UG MC3040B1200SECW 32 1 ⁄4 21 5 1 ⁄8 2614.00200 QN2200RH Surface 40 40 OH/UG MC4040B1200SECW 32 1 ⁄4 21 5 1 ⁄8 2923.00225 EQ9986 Flush 24 42 OH/UG MC2442B1225FEC 40 9 ⁄16 14 1 ⁄2 7 1 ⁄2 2856.00225 EQ9986 Surface 24 42 OH/UG MC2442B1225SEC 40 9 ⁄16 14 1 ⁄2 7 1 ⁄2 2856.00 Dimensions shown are representative of outside boxlength, width, and depth and do not include allowancesfor mounting bumps, endwalls, covers, hubs or hardwareprotrusions. Dimensions are subject to change. Main breaker not included. FRK1 - Flush rail kit.2-22Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Meter CentersNEWEUSERC Meter Load Center Combinations (200-225A) Single Phase, 3-Wire 240V AC▪ UL listed▪ Designed to meet EUSERC standards▪ Underground Feed Applications Only▪ Load wiring may exit top or bottom▪ 22,000 AIC Rated▪ Pad locking provisions on all devices▪ Surface and semi-flush units available - semi flush unitsare depth adjustable for 2x6 stud applications▪ Side hinge door removable by backing out only one screw▪ Suitable for use only as service entrance equipment▪ HC type hub provision on bottom endwall▪ 5th jaw accessory available▪ Contact local utility to confirm meter socket approvalprior to installation▪ See end of section for dimensions and wiring diagramsSelection2 METERCENTERSMC1212L1200SED (shown)MC1212L1200FEDMain lug device withprovisions for up to six2-pole breakers.MC3042B12XXFED (shown)MC3042B12XXSEDMC2042B1200FEDMC2042B1200SEDMain breaker device with a 200or 225A main, and provisionsfor 20 or 30 full 1" breakerprovisions.Amps Main No. of Max. Max. Dimensions ListMax. Breaker Mounting Spaces Circuits 2-Pole Catalog Number Height Width Depth Price $200 NEW NA Flush 12 12 6 MC1212L1200FED 38 5 ⁄16 14 5 ⁄16 7 5 ⁄16 1376.00200 NEW NA Surface 24 12 6 MC1212L1200FED 38 5 ⁄16 14 5 ⁄16 7 5 ⁄16 1376.00200 NEW MBK200A Flush 20 40 10 MC2040B1200FED 41 13 ⁄16 14 5 ⁄16 7 5 ⁄16 2600.00200 NEW MBK200A Surface 20 40 10 MC2040B1200SED 41 13 ⁄16 14 5 ⁄16 7 5 ⁄16 2600.00200 NEW MBK200A Flush 30 42 14 MC3042B1200FED 48 5 ⁄16 14 5 ⁄16 7 5 ⁄16 3140.00200 NEW MBK200A Surface 30 42 14 MC3042B1200SED 48 5 ⁄16 14 5 ⁄16 7 5 ⁄16 3140.00225 NEW MBK225A Flush 30 42 14 MC3042B1225FED 48 5 ⁄16 14 5 ⁄16 7 5 ⁄16 3366.00225 NEW MBK225A Surface 30 42 14 MC3042B1225SED 48 5 ⁄16 14 5 ⁄16 7 5 ⁄16 3366.00NEWThe new ECTPD1 can be installed onmeter combo’s listed on this page. It is areplacement door for the lower pullsection that has a weatherproof GFCIreceptacle cover . Use the receptacle fortemporary power then carry it to the nextjob site, or leave it for customer use.ECTPD1 Suitable for use as service entrance equipment when notmore than six main disconnecting means are providedand when not used as a lighting and appliance panelboard. Consists of a door, hinges, and weatherproof cover. GFCIreceptacle not included.Discount Schedule RESI Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-23

2METERCENTERSMeter CombinationsNEWEUSERC Meter Load Center Combinations (250A) Single Phase, 3-Wire 240V ACGeneral▪ UL Listed▪ Back to Back design – Meter section faces outdoor, load centerfaces indoor▪ 250A max, 200A continuous rating▪ Copper bussing and wiring forms▪ 22,000 AIC rated▪ Suitable for use only as service entrance equipment▪ See end of section for dimensions and wiring diagramsMeter Section▪ Designed to meet EUSERC standards▪ Flush mounting enclosure, adjustable for 2x4 or 2x6 studapplications▪ Underground feed applications only▪ Factory installed 200A main breaker, provisions for up to 50Amax. secondary main breaker▪ Pad locking provisions on all devices▪ Side hinge doors removable by backing out only one screw▪ HC type hub provision on bottom endwall▪ Contact local utility to confirm meter socket approval prior toinstallationLoad Center Section▪ Load wires top exit only▪ Trim mounting tabs free up both hands for trim screw installation▪ INSTA-WIRE neutrals▪ Visible neutralsLoad Center ViewSelectionLoad Center Trim/CoverSide ViewMeter Main ViewMain Main Aux Breaker Auxiliary DimensionsAmpere Breaker Max Ampere Breaker No. of No. of ListRating Type Rating Type Spaces Circuits Catalog Number Height Width Depth Price $200 QNH 50 QP, QPH 24 42 MC2442B1250FE2 47 3 ⁄8 14 3 ⁄8 7 3 ⁄4 2800.00200 QNH 50 QP, QPH 30 42 MC3042B1250FE2 47 3 ⁄8 14 3 ⁄8 7 3 ⁄4 3360.00 Factory installed main breaker. Field installed main breaker, 2-pole only, 50A max rating.2-24Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Meter CentersMeter Load Centers Single Phase, 3-Wire 240V AC▪ UL Listed▪ 400A Max, 320A Continuous▪ Meter socket options include 320A (400A max) lever bypass, nonbypass,test block bypass, and bolt on▪ Load center options include a meter main, 8 space panel with feedthrough lugs, 24 space▪ 22,000 AIC Rated▪ Accepts HD Type Hubs▪ Factory installed flush mount option▪ Surface mount devices accept field added flush rails▪ Suitable for use only as service entrance equipment▪ Contact local utility to confirm meter socket acceptance prior toinstallation▪ See end of section for knock out diagrams and wiring schematicsSurface Mount 24 space, 42circuit panel with factoryinstalled 400A Main BreakerNEWSurface Mount 30 space,42 circuit panel with factoryinstalled 200A Main Breakerand Provisions for 2nd 60-200AField Installed MainSurface Mount Meter MainWith Provisions for Two60-200A Main BreakersFlush Mount Front ViewSelectionSurface Mount 8 space, 16circuit panel with factoryinstalled 200A main andprovisions for 2nd 60-200Afield installed mainAccessoriesDescriptionCatalog NumberFlush Rail Kit for UGonly devicesECFRK1Flush Rail Kit for OH/UGfeed devicesECFRK22" HD Type Hub EC568542 1/2" HD Type Hub EC568553" HD Type Hub EC568563 1/2" HD Type Hub EC568574" HD Type Hub EC56858HD Closure Plate EC56933SSnap on Sealing Ring SRSSStainless Steel ScrewType Sealing RingSRSW(2) #6-350 kcmil UK350TA(1) #2-600 kcmil UK600TA(2) 500-1000 kcmil UK1000TA2 METERCENTERSMeterDimensionsCatalog Number Replaces Main Breaker Spaces Circuits Mounting Socket Feed Height Width DepthMM0404L1400SC New (2) Field QP(H), QNR(H) 4 2 Surface Plug In OH/UG 39 11 ⁄16 33 1 ⁄8 6 3 ⁄8MM0404L1400FD New (2) Field QP(H), QNR(H) 4 2 Flush Plug In UG 39 11 ⁄16 30 1 ⁄8 7 3 ⁄8MM0404L1400SCS New (2) Field QP(H), QNR(H) 4 2 Surface Test Block OH/UG 39 11 ⁄16 33 1 ⁄8 6 3 ⁄8MM0404L1400FDS New (2) Field QP(H), QNR(H) 4 2 Flush Test Block UG 39 11 ⁄16 30 1 ⁄8 7 3 ⁄8MC0816B1400SC New Factory QN2200RH 8 16 Surface Plug In OH/UG 39 11 ⁄16 33 1 ⁄8 6 3 ⁄8Field QP(H), QNR(H)MC0816B1400FD New Factory QN2200RH 8 16 Flush Plug In UG 39 11 ⁄16 30 1 ⁄8 7 3 ⁄8Field QP(H), QNR(H)MC0816B1400SCS New Factory QN2200RH 8 16 Surface Test Block OH/UG 39 11 ⁄16 33 1 ⁄8 6 3 ⁄8Field QP(H), QNR(H)MC0816B1400FDS New Factory QN2200RH 8 16 Flush Test Block UG 39 11 ⁄16 30 1 ⁄8 7 3 ⁄8Field QP(H), QNR(H)MC2442B1400SDB MC2442MB14B Factory JXD 24 42 Surface Bolt In UG 39 11 ⁄16 30 1 ⁄8 6 3 ⁄8MC2442B1400SD New Factory JXD 24 42 Surface Plug In UG 39 11 ⁄16 30 1 ⁄8 6 3 ⁄8MC3042B1400SD MC3040MB21 Factory QN2200RH 30 42 Surface Plug In UG 39 11 ⁄16 30 1 ⁄8 6 3 ⁄8MC3040MB22 Field QP(H), QNR(H)MC3042B1400SDS MC3040MB21SS Factory QN2200RH 30 42 Surface Test Block UG 39 11 ⁄16 30 1 ⁄8 6 3 ⁄8MC3040MB22SS Field QP(H), QNR(H)MC3042B1400SDB MC3040MB22B Factory QN2200RH 30 42 Surface Bolt In UG 39 11 ⁄16 30 1 ⁄8 6 3 ⁄8Field QP(H), QNR(H)MC3042B1400SDL MC3040MB22L Factory QN2200RH 30 42 Surface Lever Bypass UG 39 11 ⁄16 30 1 ⁄8 6 3 ⁄8Field QP(H), QNR(H)MC3042B1400FD New Factory QN2200RH 30 42 Flush Plug In UG 39 11 ⁄16 30 1 ⁄8 7 3 ⁄8Field QP(H), QNR(H)MC3042B1400SC New Factory QN2200RH 30 42 Surface Plug In OH/UG 39 11 ⁄16 33 1 ⁄8 6 3 ⁄8Field QP(H), QNR(H)MC3042B1400FDS New Factory QN2200RH 30 42 Flush Test Block UG 39 11 ⁄16 30 1 ⁄8 7 3 ⁄8Field QP(H), QNR(H)MC3042B1400SCS New Factory QN2200RH 30 42 Surface Test Block OH/UG 39 11 ⁄16 33 1 ⁄8 6 3 ⁄8Field QP(H), QNR(H)Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-25

Meter CentersElectricenter AccessoriesSelectionRX Type HubUX001WL2SRSTDMETERCENTERSHS Type HubMCJMSRSWInterchangeable HubsConduitSize(Inches)ListLbs. Catalog Number Price $HS Type Hubs3⁄4 ECHS075 39.501 ECHS100 39.501 1 ⁄4 ECHS125 39.501 1 ⁄2 ECHS150 39.502 ECHS200 69.002 1 ⁄2 ECHS250 109.00RX Type Hubs3⁄4 EC38594 22.901 EC38596 37.811 1 ⁄4 EC38597 37.811 1 ⁄2 EC38598 23.962 EC38599 23.962 1 ⁄2 EC38600 107.57HV Type Hubs2 ECHV200 91.002 1 ⁄2 ECHV250 125.003 ECHV300 182.003 1 ⁄2 ECHV350 274.004 ECHV400 362.00HC Type Hubs2 ECHC200 72.002 1 ⁄2 ECHC250 108.003 ECHC300 175.00Accessories and Closure PlatesAdapter ECHCRXA 22.50Plate EC9747-1113 (HD to RX) 28.76Closure ECHC000 24.00Plates ECHS000 38.00ECHV000 23.50EC38595 (RX Type) 38.34EC56933S (HD Type) 76.68HD Type Hubs3 EC56856 178.923 1 ⁄2 EC56857 263.064 EC56858 119.28Grounding Bars (AI/Cu — except where noted)Grounding bars are for use where grounding of electrical outlets and devices isby means of conductors. Each bar is equipped with large connectors rated for one#14-1/0 or, two or three #14-10 Cu/AI and small connectors rated for one #14-6 or,two #14-12 Cu/AI. (May be restricted by wire bending space.)Number of ConnectorsLength Total Large Small Catalog Number List Price $1 5 ⁄8 4 0 4 ECLX068M 11.802 5 ⁄16 7 2 5 ECLX069M 15.603 1 ⁄2 11 3 8 ECLX071M 15.604 5 ⁄8 15 4 11 ECLX072M 17.705 3 ⁄4 19 5 14 ECLX073M 18.607 23 6 17 ECLX074M 25.508 1 ⁄8 27 7 20 ECLX075M 28.50Sealing RingsDescription Catalog Number List Price $Snap-on type, aluminum SRSTD 17.47Screw type, aluminum SRSW 25.03Miscellaneous AccessoriesDescription Catalog Number List Price $Plastic Meter Opening Cover ECPP 19.00Plastic Meter Cover Ringless ECCP3 21.00NEMA Stud Mechanical Lugs (2) #6-350 kcmil UK350TA 55.00(1) #2-600 kcmil Al/Cu UK600TA 49.50(2) #500-1000 kcmil Al/Cu UK1000TA 64.005th jaw EMC5J 72.00Neutral Feeder Lugs#2-1/0 ECLK1-2 13.90#4-2/0 ECLK2 18.40#1-350 kcmil ECLK3 24.00 Order one for each phase and neutral. See catalog number tables for replacement main information for each meter combination.2-26Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Meter CentersDimensions and Wiring SchematicsSelection2 METERCENTERSMC0408B1150T / MC0408B1200T /MC0408B1150RT / MC0408B1200RTMC0606L1200 / MC0606L1200R / MC0606L1200RA14.26.9SERVICEDISCONNECT50 AMP MAX1A2B223456789EQPT GRD1011A1B11240.6131415(5X) LMN2N1A3 B3FEED THRUTERMINALS16NEUTRALN4G1N3MC0816B1150CT / MC0816B1200CT /MC0816B1150RCT / MC0816B1200RCTJ4(X) ACMC0816B1200SCTM12.5Knockout Code — Conduit Sizes5.329.0K(2X) .31GRX HUBMC0816B1200T / MC0816B1200RTA= 1 ⁄2B= 1 ⁄2, 3 ⁄4C= 1 ⁄2, 3 ⁄4, 1D= 3 ⁄4, 1 1 ⁄4, 1 1 ⁄2E = 1, 1 1 ⁄4, 1 1 ⁄2, 2F = 3 ⁄4, 1, 1 1 ⁄4G = 1, 1 1 ⁄4, 1 1 ⁄2H = 1, 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2J = 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2, 3K = 1, 1 1 ⁄4, 2, 2 1 ⁄2, 3L = 3 ⁄8, 1 ⁄2, 3 ⁄4M= 3 ⁄4, 1, 1 1 ⁄4, 1 1 ⁄2, 2N= 1 ⁄4P = 2, 2 1 ⁄2, 3, 3 1 ⁄2, 4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-27

Meter CentersDimensions and Wiring SchematicsSelection23.55.3(2X) RX HUBMETERCENTERS2H(3X) A(3X) .31(2X) G(4X) CMC0816B1200TH / MC0816B1150RTH / MC0816B1200RTHMC0816B1350RLTM / MC0816B1400RLTM30.260C(4X) B30.260C(4X) B(2X) H(11X) A(2X) H(11X) AServiceDisconnect(200A maximum)ServiceDisconnect(200A maximum)TestBy-passTestBy-pass1ServiceDisconnect(200A maximum)91ServiceDisconnect(200A maximum)939.555A N B81639.555A N B816NeutralN1EquipmentGroundNeutralN1EquipmentGround(2X) C(16X) A(2X) C(16X) A(2X) F(2X) FH(11X) BMC0816B1400FDSTH(11X) BMC0816B1400FDT33.26033.260ServiceDisconnect(200A maximum)ServiceDisconnect(200A maximum)TestBy-passTestBy-pass1ServiceDisconnect(200A maximum)91ServiceDisconnect(200A maximum)939.555A N B81639.555A N B816NeutralNeutralN1EquipmentGroundN1EquipmentGround(2X) C(16X) A(2X) C(16X) A(2X) F(2X) FH(11X) BMC0816B1400SCSTH(11X) BMC0816B1400SCT2-28Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

EQPT GRDEQPT GRDNEUTRALNEUTRALEQPT GRDNEUTRALMeter CentersDimensions and Wiring SchematicsSelection2 METERCENTERSMC1212L1200FEDMC1212L1200SED(2X) N(3X) A14.2C(2X) HRX Hub14.26.93.5(2X) L123456.91234567678899A2B21011A2B210111213121326.614151626.614151617171818A1B11920ECGB5 orECGB10 onlyA1B11920ECGB5 orECGB10 onlySERVICEDISCONNECTSERVICEDISCONNECT21222122(5X) L2324(5X) L2324MN2N1G1MN2N1G1J(4X)ACEQPT GRDECGB5, ECGB10 or ECGB14J(4X) ACEQPT GRDECGB5, ECGB10 or ECGB14MC1224B1100FECMC1224B1100SEC(2X) N(3X) A14.2C(2X) H1Knockout Code — Conduit Sizes6.93.526.6J(4X)AC(2X) L(5X) LMA2A1N2N1B2B1234567891011121314151617181920SERVICEDISCONNECT21222324EQPT GRDECGB5, ECGB10 or ECGB14ECGB5 orECGB10 onlyG1A= 1 ⁄2B= 1 ⁄2, 3 ⁄4C= 1 ⁄2, 3 ⁄4, 1D= 3 ⁄4, 1 1 ⁄4, 1 1 ⁄2E = 1, 1 1 ⁄4, 1 1 ⁄2, 2F = 3 ⁄4, 1, 1 1 ⁄4G = 1, 1 1 ⁄4, 1 1 ⁄2H = 1, 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2J = 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2, 3K = 1, 1 1 ⁄4, 2, 2 1 ⁄2, 3L = 3 ⁄8, 1 ⁄2, 3 ⁄4M= 3 ⁄4, 1, 1 1 ⁄4, 1 1 ⁄2, 2N= 1 ⁄4P = 2, 2 1 ⁄2, 3, 3 1 ⁄2, 4MC1224B1125FECSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-29

EQPT GRDNEUTRALMeter CentersDimensions and Wiring SchematicsSelectionRX Hub6.914.2123456789A2B21011212131415METERCENTERS26.6A1B11617181920ECGB5 orECGB10 onlySERVICEDISCONNECT21222324(5X) LMN2N1G1J(4X) ACEQPT GRDECGB5, ECGB10 or ECGB14MC1224B1125 / MC1224B1125RMC1224B1125SEC(2X) N(3X) A14.2C(2X) HRX Hub14.23.5(2X) L6.930.630.6(5X) LM(5X) LMJ(4X)ACJ(4X) ACMC1632B1100FECMC1632B1100SEC(2X) N(3X) A14.2C(2X) HRX Hub14.26.93.56.9(2X) L30.630.6(5X) LM(5X) LMJ(4X)ACJ(4X) ACMC1632B1125FECMC1632B1125SEC2-30Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersDimensions and Wiring SchematicsSelectionRX Hub23.55.334.02 METERCENTERSJ H (3X) A(3X) .31(2X) G(4X) CMC2040B1150 / MC2040B1150R /MC2040B1200 / MC2040B1200RMC2040B1150RC / MC2040B1150RJBC /MC2040B1200RC / MC2040B1200RJBCMC2040B1200FEDMC2040B1200SEDKnockout Code — Conduit Sizes3.56.940.6J(4X)AC(2X)L(5X)LMMC2442B1200FECA= 1 ⁄2B= 1 ⁄2, 3 ⁄4C= 1 ⁄2, 3 ⁄4, 1D= 3 ⁄4, 1 1 ⁄4, 1 1 ⁄2E = 1, 1 1 ⁄4, 1 1 ⁄2, 2F = 3 ⁄4, 1, 1 1 ⁄4G = 1, 1 1 ⁄4, 1 1 ⁄2H = 1, 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2J = 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2, 3K = 1, 1 1 ⁄4, 2, 2 1 ⁄2, 3L = 3 ⁄8, 1 ⁄2, 3 ⁄4M= 3 ⁄4, 1, 1 1 ⁄4, 1 1 ⁄2, 2N= 1 ⁄4P = 2, 2 1 ⁄2, 3, 3 1 ⁄2, 4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-31

Meter CentersDimensions and Wiring SchematicsSelectionRX Hub14.26.92METERCENTERS40.6(5X) LMJ(4X) ACMC2442B1200SECMC2442B1250FE230.26030.260ServiceDisconnect1ServiceDisconnect22122A N B39.555A N B39.5552142Neutral2142NeutralN1EquipmentGroundN1EquipmentGround(2X) C (16X) A(2X) C (16X) A(2X) F(2X) FH(11X) BMC2442B1400SDH(11X) BMC2442B1400SDBMC3042B1200FED (shown) / MC3042B1225FEDMC3042B1250FE22-32Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersDimensions and Wiring SchematicsSelection30.260C(4X) B(11X) A(2X) HServiceDisconnect(200A maximum)39.555 A N BNeutral1ServiceDisconnect(200A maximum)222 METERCENTERS(2X) C(16X) A21N142EquipmentGround(2X) FMC3042B1200SED / MC3042B1225SEDH(11X) BMC3042B1400FD30.260C(4X) B33.260(2X) H(11X) A39.555TestBy-passTestBy-passA N B1ServiceDisconnect(200A maximum)ServiceDisconnect(200A maximum)2239.555A N B1ServiceDisconnect(200A maximum)ServiceDisconnect(200A maximum)22Neutral(2X) C(16X) ANeutralN12142EquipmentGround(2X) C(16X) A21N142EquipmentGround(2X) F(2X) FH(11X) BMC3042B1400FDSH(11X) BMC3042B1400SC33.260Knockout Code — Conduit Sizes39.555 A N B(2X) CH(16X) A(2X) F(11X) BTestBy-passMC3042B1400SCSTestBy-passNeutral121N1ServiceDisconnect(200A maximum)ServiceDisconnect(200A maximum)2242EquipmentGroundA= 1 ⁄2B= 1 ⁄2, 3 ⁄4C= 1 ⁄2, 3 ⁄4, 1D= 3 ⁄4, 1 1 ⁄4, 1 1 ⁄2E = 1, 1 1 ⁄4, 1 1 ⁄2, 2F = 3 ⁄4, 1, 1 1 ⁄4G = 1, 1 1 ⁄4, 1 1 ⁄2H = 1, 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2J = 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2, 3K = 1, 1 1 ⁄4, 2, 2 1 ⁄2, 3L = 3 ⁄8, 1 ⁄2, 3 ⁄4M= 3 ⁄4, 1, 1 1 ⁄4, 1 1 ⁄2, 2N= 1 ⁄4P = 2, 2 1 ⁄2, 3, 3 1 ⁄2, 4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-33

Meter CentersDimensions and Wiring SchematicsSelection30.26030.260239.555A N B1ServiceDisconnect(200A maximum)ServiceDisconnect(200A maximum)2239.555 A N B1ServiceDisconnect(200A maximum)ServiceDisconnect(200A maximum)22METERCENTERSNeutralNeutral21N142EquipmentGround21N142EquipmentGround(2X) C(16X) A(2X) C(16X) A(2X) F(2X) FH(11X) BMC3042B1400SDH(11X) BMC3042B1400SDB30.26030.260LeverBy-passServiceDisconnect(200A maximum)ServiceDisconnect(200A maximum)39.555A N B1ServiceDisconnect(200A maximum)2239.555TestBy-passTestBy-passA N B1ServiceDisconnect(200A maximum)22NeutralNeutral(2X) C(16X) A21N142EquipmentGround(2X) C(16X) AN12142EquipmentGround(2X) F(2X) FH(11X) BMC3042B1400SDLH(11X) BMC3042B1400SDSRX HUB20.95.032.3K(2X) M(2X) L(11X) ACMC4040B1200SECWMM0202B1125RJBX / MM0202B1150RJBX / MM0202B1200RJBX2-34Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersDimensions and Wiring SchematicsSelection2 METERCENTERSMM0202B1150 / MM0202B1200 /MM0202B1200R / MM0202B1200RJBFMM0202ML1100S30.260(11X) A(4X) BC(2X) HServiceDisconnect(200A maximum)ServiceDisconnect(200A maximum)39.555A N BEquipmentGroundN1NeutralFMM0202ML1125HB(2X) HMM0404L1400FD30.260(11X) A(4X) BCKnockout Code — Conduit Sizes39.555B(2X) H(2X) HTestBy-passTestBy-passA N BN1EquipmentGroundNeutralServiceDisconnect(200A maximum)ServiceDisconnect(200A maximum)A= 1 ⁄2B= 1 ⁄2, 3 ⁄4C= 1 ⁄2, 3 ⁄4, 1D= 3 ⁄4, 1 1 ⁄4, 1 1 ⁄2E = 1, 1 1 ⁄4, 1 1 ⁄2, 2F = 3 ⁄4, 1, 1 1 ⁄4G = 1, 1 1 ⁄4, 1 1 ⁄2H = 1, 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2J = 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2, 3K = 1, 1 1 ⁄4, 2, 2 1 ⁄2, 3L = 3 ⁄8, 1 ⁄2, 3 ⁄4M= 3 ⁄4, 1, 1 1 ⁄4, 1 1 ⁄2, 2N= 1 ⁄4P = 2, 2 1 ⁄2, 3, 3 1 ⁄2, 4MM0404L1400FDSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog2-35

Meter CentersDimensions and Wiring SchematicsSelection33.260ServiceDisconnect(200A maximum)2ServiceDisconnect(200A maximum)METERCENTERS39.555A N BN1EquipmentGroundNeutralMM0404L1400RLMB(2X) HMM0404L1400SC33.260(2X)N14.2(2X)H6.93.5(2X)LServiceDisconnect(200A maximum)TestBy-passTestBy-passServiceDisconnect(200A maximum)39.555 A N BN1EquipmentGroundNeutral26.6(5X)LMB(2X) HMM0404L1400SCSJ(4X)ACMM0406L1125FECRX Hub14.2(2X)N(3X)A14.2C(2X)H6.96.93.5(2X)L26.630.6(5X) LM(5X)LJ(4X) ACMM0406L1125SECJ(4X)ACMMM0406L1200FEC2-36Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersDimensions and Wiring SchematicsSelectionRX Hub14.26.930.62 METERCENTERS(5X) LGNDMMM0406L1200H / MM0406L1200RHJ(4X) ACMM0406L1200SECKnockout Code — Conduit SizesA= 1 ⁄2B= 1 ⁄2, 3 ⁄4C= 1 ⁄2, 3 ⁄4, 1D= 3 ⁄4, 1 1 ⁄4, 1 1 ⁄2E = 1, 1 1 ⁄4, 1 1 ⁄2, 2F = 3 ⁄4, 1, 1 1 ⁄4G = 1, 1 1 ⁄4, 1 1 ⁄2H = 1, 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2J = 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2, 3K = 1, 1 1 ⁄4, 2, 2 1 ⁄2, 3L = 3 ⁄8, 1 ⁄2, 3 ⁄4M= 3 ⁄4, 1, 1 1 ⁄4, 1 1 ⁄2, 2N= 1 ⁄4P = 2, 2 1 ⁄2, 3, 3 1 ⁄2, 4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog2-37

2METERCENTERSMeter CentersModular Metering: IntroductionSiemens Modular Metering can beadapted to almost every requirement inresidential and commercial groupmetering applications. The design ofeach module was completed with easyhandling, fast installation, and simplifiedlayout in mind.The complete line can be furnished forsingle phase three wire 120/240V ACand three phase, four wire 120/Y208VAC. Meter modules containing threephase thru bussing and three phasetenant mains are also rated for 240V ACDelta Systems. All service entrancedevices are rated for 240V AC Max.The incoming utility service can beterminated in breaker, switch, or tap box“service entrance modules”. Tap boxesmay be used when the total number ofmeters is 6 or less. For those areas thatneed to meet EUSERC requirements forunderground feed a separate pullbox isavailable to attach to breaker devices upto 1200amps. Switch devices with anintegral pullbox are available up to800amps.All 200amp meter modules offer shortcircuit ratings up to 100,000A IR.Modules are available to meet the widevariety of bypass requirements fromutilities nationwide including hornbypass, lever bypass, and test blockbypass. Residential modules (those withno bypass or horn bypass) are availablein 2-6 positions. Commercial moduleswith a lever bypass are available in 1-4positions. Commercial modules with atest block bypass are available in 1-3positions.All 320amp meter modules offer shortcircuit ratings up to 42,000A IR if fullyrated. Higher ratings may be achievedthru series ratings and are dependentupon the breaker used as the servicedisconnect.ResidentialModuleBreakerModulePull BoxModuleLever BypassModuleGeneralSwitchModuleTap BoxModuleText BlockBypass ModuleFeaturesSingle Bolt JointThe time-saving single bolt joint (SBJ)provides for a single electrical connectionbetween meter modules- a Siemensexclusive feature. The SBJ slips into onemodule with the adjacent unit beingdrawn towards it. The SBJ locks intoplace via a bracket on the back of eachmodule- this keeps the SBJ stationaryand is the primary means of groundingbetween modules.Beveled edges on the SBJ allow for easypositioning of the joint. Field installedstuds are located just above and belowthe SBJ opening to compress thesurrounding gaskets together to form awater-tight seal. For extra stabilityadditional nuts and bolts are included asa means of physically joining the meterstacks together both above and belowthe SBJ opening.Bus ConstructionUn-metered bus issurrounded by a barrierand all in-accessible busconnections are weldedfor maximum strength. Allother connections- singlebolt joint and metersocket connections, arebolted and accessible.Neutral & Ground ProvisionsGrounds and Neutrals arelocated on the bottomend of the metermodules. All groundsand neutrals may be relocatedto the top of theenclosure if a top-exit isneeded (A siemensexclusive feature). Each meter modulehas small indents to help locate a fieldcutknockout if a top exit is preferred.Tenant Breaker ProvisionsEach single phase 200amp meter sockethas a provision for a 4-pole plug-in typeQPP circuit breaker. A 2-pole plug-in125amp max may be used in thesepositions with the use of a filler plate.No other conversion kits are necessaryfor this transition. Each single phase125amp meter socket has a provision fora 2-pole plug-in type QP circuit breaker.Each breaker is adjacent to each meterposition. Generous gutter space allowsfor wiring from top, bottom, or back ofthe meter module. Each meter cover isembossed to provide a location for theunit (apartment) number.2-38Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersModular Metering: Selection InformationGeneral2 METERCENTERSPullbox w/Landing LugsMain DeviceSpacer MeterStackMeterStackTap Box1 2 3 4 5 6A single bolt joint is required to connect all thru bussing. The application above requires (4) SBJ’s, one between eachbussed module. Two SBJ’s would be included (one with each meter stack) and two would have to be purchased for theload side tap box and one for the spacer module to main breaker connection.Selection Information Pullboxes have provisions tofield install lugs to acceptincoming and outgoingconductors. The modulesshould be used forunderground service feedswhen inspecting authoritiesrequire the service to be splitWMMB1400or used in conjunction with acircuit breaker module when a EUSERCspecification for underground feed isneeded. Pullboxes are not meant forstand-alone use- they must be used with aservice entrance breaker module. Most breaker and switch devices acceptincoming feeds from the top or bottom.400-800amp switches areinvertible for top or bottomfeed. 1200amp switchesutilize a molded case switch(looks like a breaker) and arebottom feed only. Breakermodules are available inseparate top and bottom feed WMS44Uversions. A “BF” suffix on abreaker module catalog numberdesignates bottom feed. Tap boxes maybe used as a main when 6 or less meterpositions are present. Tap boxes offer adirect connection to the thru bus with noovercurrent protection. Tap boxes are notintended to feed breaker or switchmodules via the thru bus. Breaker, switch,and tap box modules do not come with asingle bolt joint. A spacer is required betweenmeter stack and maindisconnect or tap box wheninstallation is in EUSERCmetering jurisdictions. Thespacer can also be used toextend the length of thelineup when needed.WMEX1U Meter stacks should beselected to coincide withthe number of meterpositions required. Allthru bussing must be thesame as the serviceentrance device (all singlephase or all three phase).Each stack comes with asingle bolt joint couplerand mounting rail. A single bolt jointcoupler is needed for each thru busconnection. Utilities have varyingrequirements on height restrictions, covertypes, and bypass types for eachapplication therefore utility acceptanceshould be obtained prior to installation ofany modules.WMM44AB200UR Order a circuit breakertenant main for each meterposition. Circuit breakersmust match phase of metersocket. Determine properbreakers from series ratingchart.2-Pole QPP Tapboxes allow for a directconnection to the thrubussing. This is typicallyused to feed meter moduleswhen 6 or less meters arepresent, but it can also beused to feed remoteequipment from a modularmeter installation such as acurrent transformer cabinet. WMTB8UAs this is un-metered power it is theinstaller’s responsibility to ensure utilityapproval prior to installation.Various accessories are available to helpcustomize the products to fit your application.All breaker, switch, and tapbox modulesinclude (2) thru bus cover plates (cat #WMEP) meant to cover the ends of theinstallation. Additional cover plates areavailable for order if needed. For applicationsusing a load-side tap box or breaker modulean additional single bolt joint coupler will beneeded (cat #’s SBJ1 for single phase, SBJ4for three phase). Other accessories can befound on page 2-81. Spacers are required between meter stack and maindisconnect or tap box when installation is in EUSERCmetering jurisdictions. Check with other utilities prior toinstallation.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-39

2METERCENTERSMeter CentersModular Metering: Common Series Rating ChartsSelectionUse the tables below to determine the correct combination of equipment and circuit breakers for the available fault current. Thischart provides series rating information for the most common applications. For a complete series rating chart please contact yourlocal sales office.Residential / Commercial Available Fault CurrentLoad CenterRMS Symmetrical Amps at Service Entrance Metering Branch Branch Circuit120/240 Volts Maximum Modules Circuit Breakers Breakersto 10,000Series MPOU, WMPOUMSU, WMSUQP (15—125A)QPP (125—200A)QP, QPJ, QT, QPF, QEMC, WMCMTBU, WMTBU QP (15—125A)QPP (125—200A)QP, QPJ, QT, QPF, QESeries MSU, WMSUQPH (15—125A)to 22,000MC, WMCQPPH (125—200A)QP, QT, QPF, QEMTBU, WMTBU QPH (15—125A)QPPH (125—200A)QP, QT, QPF, QESeries MSU, WMSU QPH (15—125A)to 42,000MC, WMCHQPP (125—200A)QP, QT, QPF, QEMTBU, WMTBU HQP (15—125A)HQPP (125—200A)QP, QT, QPF, QESeries MSU, WMSUQPH (15—125A)to 65,000MC, WMCHQPP (125—200A)QP, QT, QPF, QEMTBU, WMTBU HQP (15—125A)HQPP (125—200A)QP, QT, QPF, QEto 100,000 Series MSU, WMSU HQPPH (100—200A) 2-pole QP, QT, QPF, QEMTBU, WMTBU HQPPH (100—200A) 2-pole QP, QT, QPF, QECommercialAvailable Fault Current RMSSymmetrical Amps at 120/240Load CenterVolts Maximum 1-phase, Service Entrance Metering Branch Branch Circuit240 Volts Maximum 3-phase Modules Circuit Breakers BreakersSeries MPOU, WMPOUQP (15—125A) 2-poleQP (15—100A) 3-poleMSU, WMSUQPP (125—200A) 2-poleQP, QPJ, QT, QPF, QEto 10,000MC, WMC QJ2 (60—200A) 3-pole QP, QPJ, QT, QPF, QEQP (15—125A) 2-poleQP (15—100A) 3-poleQP, QPJ, QT, QPF, QEMTBU, WMTBU QPP (125—200A) 2-poleQJ2 (60—200A) 3-poleQP, QPJ, QT, QPF, QEQPH (15—125A) 2-poleSeries MSU, WMSU QPH (15—100A) 3-pole QP, QT, QPF, QEMC, WMCQPPH (125—200A) 2-poleto 22,000QJH2 (60—200A) 3-poleQP, QPF, QEQPH (15—125A) 2-poleQPH (15—100A) 3-poleQP, QT, QPF, QEMTBU, WMTBU QPPH (125—200A) 2-poleQJH2 (60—200A) 3-poleQP, QPF, QEQPH (15—125A) 2-poleSeries MSU, WMSU QPH (15—100A) 3-pole QP, QT, QPF, QEMC, WMCHQPP (125—200A) 2-poleto 42,000QJ2-H (60—200A) 3-poleQPHQP (15—125A) 2-poleHQP (15—100A) 3-poleQP, QT, QPF, QEMTBU, WMTBU HQPP (125—200A) 2-poleQJ2-H (60—200A) 3-poleQPQPH (15—125A) 2-poleSeries MSU, WMSU QPH (15—100A) 3-pole QP, QT, QPF, QEMC, WMCHQPP (125—200A) 2-poleto 65,000HQJ2HQP, QT, QPF, QEHQP (15—125A) 2-poleHQP (15—100A) 3-poleQP, QT, QPF, QEMTBU, WMTBU HQPP (125—200A) 2-poleHQJ2HQP, QT, QPF, QESeries MSU, WMSUHQPPH (100—200A) 2-poleQP, QT, QPF, QEHQJ2HQP, QT, QPF, QEto 100,000HQPPH (100—200A) 2-poleQP, QT, QPF, QEMTBU, WMTBU HQJ2H QP, QT, QPF, QE This chart is applicable only with residential unifiedmeter modules. (Siemens sockets, 1-phase outgoing)on pages 2-44 thru 2-45. MSU and WMSU fusible switch modules use Class Tfuses only. MPOU and WMPOU pullouts also useClass T fuses.2-40 Service entrance modules may not have suffix Uin number. No overcurrent protection.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogListed by Underwriters’ Laboratories, Inc., under file#E10848(N).Discount Schedule RESI

Meter CentersModular Metering: Circuit Breaker Service Entrance ModulesFeatures▪ 65,000 AIC Rated, 100,000 AIC Available Selection▪ Devices available in top feed or bottom feed construction ▪ Alternate amperage units available ▪ All standard enclosures are Nema 3R rated ▪ Devices equipped for bus duct entry are available , see page 2-82▪ Breaker modules include hanging bracket and end plates. Orderextra single bolt joint coupler if used as a load side disconnect, seepage 2-83 for accessories2 METERCENTERS400 Ampere CircuitBreaker Module600 Ampere CircuitBreaker ModuleCheck local utility requirements prior to installation.Circuit Breaker ModulesMaximum Outdoor Enclosure Line Terminal Lugs Dimensions (inches) Ampere Interrupt Top List KO Bottom List KO Breaker No. & Size PerRating Rating Feed Price $ Fig. Feed Price $ Fig. Type Line & Neutral Height Width Depth1-Phase, 3-Wire SN, Incoming, 120/240V AC Max.400 65,000 WMC4 7015.00 A4A WMC4BF 7015.00 A4B JXD6 (2) #1-500 kcmil 33.00 15.09 15.00600 65,000 WMC6 10640.00 A4C WMC6BF 10640.00 A4D LXD6 (2) #1-500 kcmil 37.00 15.09 15.00700 65,000 WMC7 13395.00 A5A WMC7BF 13395.00 A5B MD6 (3) #1/0-500 kcmil 43.00 20.09 15.00800 65,000 WMC8 13395.00 A5A WMC8BF 13395.00 A5B MD6 (3) #1/0-500 kcmil 43.00 20.09 15.001000 65,000 WMC10 18281.00 A6A WMC10BF 18281.00 A6B ND6 (4) #2-500 kcmil 50.00 20.09 15.001200 65,000 WMC12 26001.00 A6A WMC12BF 26001.00 A6B ND6 (4) #2-500 kcmil 50.00 20.09 15.001400 65,000 WMC14 35163.00 A7A WMC14BF 35163.00 A7B PD6 (5) 300-600 kcmil 62.00 24.88 16.481600 65,000 WMC16 35163.00 A7A WMC16BF 35163.00 A7B PD6 (5) 300-600 kcmil 62.00 24.88 16.483-Phase, 4-Wire SN, Incoming, 240V AC Max.400 65,000 WMC44 8030.00 A4A WMC44BF 8030.00 A4B JXD6 (2) #1-500 kcmil 33.00 15.09 15.00600 65,000 WMC64 12646.00 A4C WMC64BF 12646.00 A4D LXD6 (2) #1-500 kcmil 37.00 15.09 15.00700 65,000 WMC74 16495.00 A5A WMC74BF 16495.00 A5B MD6 (3) #1/0-500 kcmil 43.00 20.09 15.00800 65,000 WMC84 16495.00 A5A WMC84BF 16495.00 A5B MD6 (3) #1/0-500 kcmil 43.00 20.09 15.001000 65,000 WMC104 20725.00 A6A WMC104BF 20725.00 A6B ND6 (4) #2-500 kcmil 50.00 20.09 15.001200 65,000 WMC124 29119.00 A6A WMC124BF 29119.00 A6B ND6 (4) #2-500 kcmil 50.00 20.09 15.001400 65,000 WMC144 43048.00 A7A WMC144BF 43048.00 A7B PD6 (5) 300-600 kcmil 62.00 24.88 16.481600 65,000 WMC164 43048.00 A7A WMC164BF 43048.00 A7B PD6 (5) 300-600 kcmil 62.00 24.88 16.48Maximum Indoor Enclosure Line Terminal Lugs Dimensions (inches) Ampere Interrupt Top List KO Bottom List KO Breaker No. & Size PerRating Rating Feed Price $ Fig. Feed Price $ Fig. Type Line & Neutral Height Width Depth2000 65,000 MC20 40631.00 A30A MC20BF 40631.00 A30B RD6 (5) 300-600 kcmil 62.00 24.88 16.48 Dimensions shown are representative of outside boxdimensions and do not include allowances for mountingbumps, covers, hubs, or hardware protrusions. Wire range is the maximum allowable. 1200amp maximum feed per side. Contact sales office for ordering information on 100Krated units. 10% adder applies. Devices are top or bottom, not combination. Bothconstructions use the same enclosure size and knockoutpatterns. Contact sales office for ordering information. Lead timemay apply. Bus Duct devices and 2000amp device are indoor, typeN1, only. Breaker types listed are for top feed units. All bottomfeed units use non-interchangeable trip breakers.Discount Schedule RESI Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-41

Meter CentersModular Metering: Main Switch Service Entrance ModulesFeaturesSelection▪ 400-800Amp Standard Switches (Non-EUSERC) are invertible for top orbottom feed▪ 1200Amp device uses a molded case switch (looks like a breaker)▪ All switches are setup for class T fuses2METERCENTERS▪ 100,000 AIC Rating▪ Small Compact Size▪ Bus Duct entry available for 400-800Amp standard switches, seepage 2-83400 Ampere FusibleSwitch Module800 Ampere Fusible Switch &Pullbox Combination ModuleCheck local utility requirements prior to installation.Fusible Switch ModulesMaximum Outdoor Enclosure Line Terminal Lugs Dimensions (inches) Ampere Interrupt Catalog List Service No. & Size PerRating Rating Number Price $ Fuse Type Feed Line & Neutral Height Width Depth KO Fig.1-Phase, 3-Wire SN, Incoming, 120/240V AC Max.200 100,000 WMP02U 1343.00 T OH (1) #6-250 kcmil 33.00 12.00 13.00 A3400 100,000 WMS4U 4086.00 T OH/UG (2) #4-500 kcmil 35.50 15.00 16.00 A1A600 100,000 WMS6U 7762.00 T OH/UG (2) #4-500 kcmil 41.50 15.00 16.00 A1B800 100,000 WMS8U 11895.00 T OH/UG (3) #4-500 kcmil 41.50 15.00 16.00 A1C1200 100,000 WMS12U 25514.00 T UG (4) #250-500 kcmil 50.00 20.00 15.00 A1D3-Phase, 4-Wire SN, Incoming, 240V AC Max.200 100,000 WMP024U 2043.00 T OH/UG (1) #6-250 kcmil 33.00 12.00 13.00 A3400 100,000 WMS44U 4643.00 T OH/UG (2) #4-500 kcmil 35.50 15.00 16.00 A1A600 100,000 WMS64U 9480.00 T OH/UG (2) #4-500 kcmil 41.50 15.00 16.00 A1B800 100,000 WMS84U 17269.00 T OH/UG (3) #4-500 kcmil 41.50 15.00 16.00 A1C1200 100,000 WMS124U 28611.00 T UG (4) #250-500 kcmil 50.00 20.00 15.00 A1DCombination Fusible Switch & Pull Box Modules (Meets EUSERC Requirements)Maximum Outdoor Enclosure Line Terminal Lugs Dimensions (inches) Ampere Interrupt Catalog List Service No. & Size PerRating Rating Number Price $ Fuse Type Feed Line & Neutral Height Width Depth KO Fig.1-Phase, 3-Wire SN, Incoming, 120/240V AC Max.400 100,000 WMS4UPBU 5005.00 T UG 1 Set of 2 Studs 50.06 25.50 15.00 A2A600 100,000 WMS6UPBU 9260.00 T UG 2 Set of 2 Studs 50.06 25.50 15.00 A2A800 100,000 WMS8UPBU 13374.00 T UG 3 Set of 2 Studs 50.06 25.50 15.00 A2A3-Phase, 4-Wire SN, Incoming, 240V AC Max.400 100,000 WMS44UPBU 6842.00 T UG 1 Set of 2 Studs 50.06 25.50 15.00 A2A600 100,000 WMS64UPBU 12161.00 T UG 2 Set of 2 Studs 50.06 25.50 15.00 A2A800 100,000 WMS84UPBU 20000.00 T UG 3 Set of 2 Studs 50.06 25.50 15.00 A2A Dimensions shown are representative of outside boxdimensions and do not include allowances for mountingbumps, covers, hubs, or hardware protrusions. Wire range listed is the maximum allowable. Fuses not included. Fusible pull-out switch. Lugs not included. NEMA II Stud Pattern lugs must beinstalled by user or utility. Device uses a molded case switch (looks like a breaker).Class T fuses must be installed in conjuction with themolded case switch for proper operation.2-42Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Meter CentersModular Metering: Tap Box and Pullbox ModulesFeaturesTap BoxesSelection▪ 1200Amp thru bussing included for line side feed or load side tap andare invertible for top or bottom feed▪ 100,000 AIC Rating▪ Compact ConstructionPullboxes▪ EUSERC-compliant construction for cable entry and exit (no thru busconnection)2 METERCENTERSTap BoxModulePullboxModule▪ Can be used with breaker modules (up to 1200amps) for EUSERCcompliance for underground feed or when extra conductor lengthneeded (aligns with 6" KO on both modules)▪ 65,000 AIC RatingCheck local utility requirements prior to installation.Tap Box Modules Maximum Outdoor Enclosure Line Terminal Lugs Dimensions (inches) Ampere Interrupt Catalog List Service No. & Size PerRating Rating Number Price $ Feed Line & Neutral Height Width Depth KO Fig.1-Phase, 3-Wire SN, Incoming, 120/240V AC Max.800 100,000 WMTB8U 1507.00 OH/UG (3) 1/0-400 kcmil 39.00 12.00 12.00 A21200 100,000 WMTB12U 2274.00 OH/UG (4) 250-600 kcmil 41.00 15.00 13.00 A81600 100,000 WMTB16U 4877.00 OH/UG (5) 300-600 kcmil 41.75 25.00 14.00 A93-Phase, 4-Wire SN, Incoming, 240V AC Max.800 100,000 WMTB84U 1632.00 OH/UG (3) 1/0-400 kcmil 39.00 12.00 12.00 A21200 100,000 WMTB124U 2538.00 OH/UG (4) 250-600 kcmil 41.00 15.00 13.00 A81600 100,000 WMTB164U 5277.00 OH/UG (5) 300-600 kcmil 41.75 25.00 14.00 A9Pullbox Modules (no thru-bus, includes lug landings)Maximum Outdoor Enclosure Line Terminal Lugs Dimensions (inches) Ampere Interrupt Catalog List Service No. & Size PerRating Rating Number Price $ Feed Line & Neutral Height Width Depth KO Fig.1-Phase, 3-Wire SN, Incoming, 120/240V AC Max.400 65,000 WMMB1400 1382.00 UG 1 Set of 2 Studs 37.50 16.69 9.34 A10A800 65,000 WMMB1800 1534.00 UG 2 Sets of 2 Studs 45.50 19.44 12.72 A10B1200 65,000 WMMB11200 3186.00 UG 3 Sets of 2 Studs 47.50 25.94 12.72 A10C3-Phase, 4-Wire SN, Incoming, 240V AC Max.400 65,000 WMMB3400 2191.00 UG 1 Set of 2 Studs 37.50 16.69 9.34 A10A800 65,000 WMMB3800 2763.00 UG 2 Sets of 2 Studs 45.50 25.94 12.72 A10B1200 65,000 WMMB31200 5749.00 UG 3 Sets of 2 Studs 47.50 33.83 12.72 A10C Dimensions shown are representative of outside boxdimensions and do not include allowances for mountingbumps, hubs, or hardware protrusions. Wire range listed is the maximum allowable.Discount Schedule RESI Single bolt joint coupler not included. If used for loadside application an additional coupler must be ordered. Devices rated for 22,000. 65,000 rating requires cables tobe tied together. Please see instructions with pullbox fordetails.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog2-43

2METERCENTERSMeter CentersModular Metering: Residential Modules—Ring StyleFeaturesWMM4UFour SocketModuleWMM6USix SocketModule▪ UL Listed for 60/75° C conductors.See equipment markings forapplications▪ 1200 Amp thru bus▪ Interconnectable with discontinued“MM” modular metering▪ Factory phased 3ø units saves oninstallation time▪ 200A units UL Listed for use onsystems capable of delivering up to100,000 RMS symmetrical amperesmaximum short circuit current▪ Single bolt joint coupler included.Order additional couplers asneeded. Use closure plates frommain device to seal openings onside for thru bus.Check local utility requirements prior to installation.Main Breaker PanelSelectionSeries Tested Systems—SpecifySiemens Modular Meteringequipment in conjunction withUltimate Load Centers.1-Phase, 3-Wire SN, Incoming & Outgoing, Ring Type Gangable Meter StackContinuous Meter Dimensions Field IntalledDuty Amps Positions Catalog List Breaker Maximum 5th JawPer Position Per Stack Number Price $ Provision AIC Height Width Depth Assembly KO Fig.1-Phase 4-Jaw Sockets, 1 Phase-3 Wire Thru-Bus 120/240V AC Max.2 WMM2U 1417.00 65,000 32.41 13.44 7.84 ECMM5J A123 WMM3U 1587.00 65,000 41.41 13.44 7.84 ECMM5J A12125 4 WMM4U 2083.00 QP, QPH, 65,000 50.41 13.44 7.84 ECMM5J A135 WMM5U 2684.00 HQP 65,000 59.41 13.44 7.84 ECMM5J A146 WMM6U 3301.00 65,000 68.41 13.44 7.84 ECMM5J A152 WMM2200U 3157.00 QPP, QPPH, 100,000 36.41 17.44 7.84 ECMM5J A16200 3 WMM3200U 3379.00 HQPP, HQPPH, 100,000 47.41 17.44 7.84 ECMM5J A174 WMM4200U 4657.00 QP, QPH, HQP 100,000 58.41 17.44 7.84 ECMM5J A183-Phase, 4-Wire SN, Incoming and 1-Phase, 3-Wire SN Outgoing, Ring Type Gangable Meter StacksContinuous Meter Dimensions Duty Amps Positions Catalog List Breaker Maximum 5th Jaw Stack Phasing:Per Position Per Stack Number Price $ Provision AIC Height Width Depth Assembly Phases/Socket KO Fig.1-Phase 5-Jaw Sockets, 3 Phase-4 Wire Thru-Bus 208Y/120V AC 1252003 WMM34U 1688.00 65,000 41.41 13.44 7.84 Installed 1-AB, 1-BC, 1-CA A124 WMM44ABU 2254.00 65,000 50.41 13.44 7.84 Installed 2-AB, 1-BC, 1-CA A134 WMM44BCU 2254.00 QP, QPH, 65,000 50.41 13.44 7.84 Installed 2-BC, 1-AC, 1-AB A134 WMM44CAU 2254.00 HQP 65,000 50.41 13.44 7.84 Installed 2-AB, 1-BC, 1-CA A135 WMM54ABU 2908.00 65,000 59.41 13.44 7.84 Installed 1-AB, 2-BC, 2-CA A146 WMM64U 3574.00 65,000 68.41 13.44 7.84 Installed 2-AB, 2-BC, 2-CA A152 WMM24AB200U 3208.00 100,000 36.41 17.44 7.84 Installed 1-BC, 1-CA A163 WMM34200U 3574.00 100,000 47.41 17.44 7.84 Installed 1-AB, 1-BC, 1-CA A174 WMM44AB200U 4556.00 QPP, QPPH, 100,000 58.41 17.44 7.84 Installed 2-AB, 1-BC, 1-CA A184 WMM44BC200U 4556.00 HQPP, 100,000 58.41 17.44 7.84 Installed 2-BC, 1-AC, 1-AB A184 WMM44CA200U 4556.00 HQPPH, 100,000 58.41 17.44 7.84 Installed 2-AB, 1-BC, 1-CA A185 WMM54AB200U 5315.00 QP, QPH, 100,000 69.41 17.44 7.84 Installed 2-AC, 2-BC, 1-AB A195 WMM54BC200U 5315.00 HQP 100,000 69.41 17.44 7.84 Installed 2-AC, 2-AB, 1-BC A195 WMM54CA200U 5315.00 100,000 69.41 17.44 7.84 Installed 2-AB, 2-BC, 1-AC A19 Dimensions shown are representative of outside boxlength, width, & depth and do not include allowancesfor mounting bumps, endwalls, covers, hubs orhardware protrusions. Order filler plate ECCP3U if using standard 2" widecircuit breaker (QP). NOT for use on 3 phase-4 wire delta systems. Order ECMM5IJ for insulated 5th jaw. Max. AIC determined by maximum AIC of tenantbreakers. Higher ratings may be achieved thru approvedseries rating combinations.2-44Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Meter CentersModular Metering: Residential Modules—Ringless StyleFeatures▪ UL Listed for 60/75°C conductors.See equipment markings forapplications▪ Individual split covers with barrellock compatibility▪ Available with and without factoryinstalled horn bypass - field installhorn bypass kit available (#ECHBK)▪ Interconnectable with discontinued“MM” modular metering▪ Factory phased 3ø units saves oninstallation timeSelection▪ Single bolt joint coupler included.Order additional couplers as needed.Use closure plates from main deviceto seal openings for thru bus onside.▪ 200A units UL Listed for use onsystems capable of delivering up to100,000 RMS symmetrical amperesmaximum short circuit currentSeries Tested Systems—SpecifySiemens Modular Metering equipmentin conjunction with EQ® III or UltimateLoad Centers.2 METERCENTERSWMM3URThree SocketModuleWMM4200URFour SocketModuleCheck local utility requirements prior to installation.1-Phase, 3-Wire SN, Incoming & Outgoing, Ringless Type Gangable Meter StacksThru-Bus Cont. Meter Catalog Number Dimensions Field InstalledRating Amps/ Positions Horn List No List Breaker Maximum 5th Jaw KO(amps) Pos Per Stack Bypass Price $ Bypass Price $ Provision AIC Height Width Depth Assembly Fig.2 WMM2UR 1492.00 WMM2URNJ 1540.00 65,000 32.41 13.44 7.84 ECMM5J A113 WMM3UR 1677.00 WMM3URNJ 1739.00 65,000 41.41 13.44 7.84 ECMM5J A12125 4 WMM4UR 2195.00 WMM4URNJ 2330.00 QP, QPH, HQP 65,000 50.41 13.44 7.84 ECMM5J A131200 5 WMM5UR 2806.00 WMM5URNJ 2935.00 65,000 59.41 13.44 7.84 ECMM5J A146 WMM6UR 3427.00 WMM6URNJ 3744.00 65,000 68.41 13.44 7.84 ECMM5J A152 WMM2200UR 3208.00 WMM22URNJ 1610.00 QPP, QPPH, HQPP, 100,000 36.41 17.44 7.84 ECMM5J A16200 3 WMM3200UR 3451.00 WMM32URNJ 3574.00 HQPPH, QP, 100,000 47.41 17.44 7.84 ECMM5J A174 WMM4200UR 4782.00 WMM42URNJ 4878.00 QPH, HQP 100,000 58.41 17.44 7.84 ECMM5J A183-Phase, 4-Wire SN, Incoming and 1-Phase, 3-Wire SN Outgoing, 5-Jaw Ringless TypeGangable Meter StacksThru-Bus Cont. Meter Catalog Number Dimensions Rating Amps/ Positions Horn List No List Breaker Maximum Stack Phasing KO(amps) Pos Per Stack Bypass Price $ Bypass Price $ Provision AIC Height Width Depth Phases/Sockets Fig.3 WMM34UR 1761.00 WMM34URNJ 1840.00 65,000 41.41 13.44 7.84 1-AB, 1-BC, 1-AC A12WMM44ABUR 2378.00 WMM44ABURNJ 2485.00 QP, 65,000 50.41 13.44 7.84 2-AB, 1-BC, 1-AC A134 WMM44BCUR 2378.00 WMM44BCURNJ 2485.00 QPH, 65,000 50.41 13.44 7.84 1-AB, 2-BC, 1-AC A14125 WMM44CAUR 2378.00 WMM44CAURNJ 2485.00 HQP 65,000 50.41 13.44 7.84 1-AB, 1-BC, 2-AC A14WMM54ABUR 3029.00 WMM54ABUR3NJ 3208.00 65,000 59.41 13.44 7.84 1-AB, 2-BC, 2-AC A145 WMM54BCUR 3029.00 WMM54BCURNJ 3208.00 65,000 59.41 13.44 7.84 2-AB, 1-BC, 2-AC A15WMM54CAUR 3029.00 WMM54CAURNJ 3208.00 65,000 59.41 13.44 7.84 2-AB, 2-BC, 1-AC A151200 6 WMM64UR 3744.00 WMM64URNJ 3774.00 65,000 68.41 13.44 7.84 2-AB, 2-BC, 2-AC A152 — — WMM24AB2URNJ 3363.00 100,000 36.41 17.44 7.84 1-BC, 1-AC A163 WMM34200UR 3649.00 WMM342URNJ 3720.00 100,000 47.41 17.44 7.84 1-AB, 1-BC, 1-AC A17WMM44AB200UR 4657.00 WMM44AB2URNJ 4782.00 QP, QPH, 100,000 58.41 17.44 7.84 2-AB, 1-BC, 1-AC A18200 4 WMM44BC200UR 4657.00 WMM44BC2URNJ 4782.00 HQP, QPP 100,000 58.41 17.44 7.84 1-AB, 2-BC, 1-AC A18WMM44CA200UR 4657.00 WMM44CA2URNJ 4782.00 QPPH, 100,000 58.41 17.44 7.84 1-AB, 1-BC, 2-AC A18— — WMM54AB2URNJ 5399.00 HQPP, 100,000 69.41 17.44 7.84 1-AB, 2-BC, 2-AC A195 — — WMM54BC2URNJ 5399.00 HQPPH 100,000 69.41 17.44 7.84 2-AB, 1-BC, 2-AC A19— — WMM54CA2URNJ 5399.00 100,000 69.41 17.44 7.84 2-AB, 2-BC, 1-AC A19 Dimensions shown are representative of outside boxlength, width, & depth and do not include allowancesfor mounting bumps, endwalls, covers, hubs orhardware protrusions. Order filler plate ECCP3U if using standard 2" widecircuit breaker (QP). NOT for use on 3 phase-4 wire delta systems. Order ECMMI5J for insulated 5th jaw. Max. AIC determined by maximum AIC of tenantbreakers. Higher ratings may be achieved thru approvedseries rating combinations. Only “NJ” suffix should be used within the FloridaMeter Group territory.Discount Schedule RESI Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-45

2METERCENTERSMeter CentersModular Metering: Commercial Modules—IntroductionGeneralCommercial metering applications using 240volts, such as shopping centers, office buildings, and small commercial buildingsfrequently require different meter sockets from those used in residential applications. In many instances a 3-phase meter socketand tenant circuit breaker must be used. Siemens is proud to offer a complete line of commercial metering to meet the majorityof the vast array of utility specifications for commercial meter services.For those utilities requiring a lever bypass Siemens has a complete line of 100-320amp/position lever bypass meter modulesusing the high-quality Landis & Gyr HQ lever bypass block. These modules offer several Siemens exclusive features to helpinstallation.If a EUSERC-approved commercial service is needed Siemens is now proud to offer our line of test-block bypass (TBB)commercial meter modules. These devices eliminate the labor intensive bussed gutter solution that was used in the past.Some utilities require a bolt-in meter for 400amp applications. The bolt-in meter socket (also called K base) was designed andstill originates with Landis & Gyr. Siemens offers the widest array of K base meter modules in the industry. The socket used inthese modules is utility specific so please check for approval prior to installation.The versatitlity and capability of the Siemens line of commercial meter modules has been designed to fit the majority ofapplication and utility requirements and can be inter-connected with residential meter modules for maximum versatility.Lever BypassSiemens lever bypass meter modules are designed to stand up to the heavydemands of commercial services. Siemens features the Landis & Gyr HQ meterblock at each position. Modules are available with 3-phase or single phase thru buscoupled with 3-phase or single phase tenant circuit breakers. Applications requiring240/120V AC 3-phase 4-wire Delta should only use those modules with a 3-phasetenant main provision.Features include:▪ 1-4 positions on 100 and 200amp devices▪ 1-2 positions on 320amp(400amp max) devices▪ 100,000 AIC on 200amp devices▪ Factory installed tenant breakers on 320amp devices▪ 3-Phase 100amp devices- saves on cost of 3-phase tenant mains▪ 5th jaw included, standard, on all single phase meter modules▪ 1200amp thru-bus, NEMA 3R outdoor construction▪ Siemens exclusive floating deadfront on 200amp deviceseliminates the need forfiller plates when using a 100amp breaker in a 200amp provision▪ Centrally located neutrals and ground lugs by each breaker provision▪ Factory phased sockets reduces installation time▪ Horizontal 3-phase breaker mounting- reduces install time and effortTest Block BypassSiemens line of test-block-bypass (TBB) meter modules are designed to provide asolution for commercial group metering applications in utility service areas thatfollow the EUSERC specification. Each position features the same meter block usedon Siemens’ commercial switchboards to maintain high quality standards. Modulesare available with 3-phase or single phase thru bus coupled with 3-phase or singlephase tenant circuit breakers. Applications requiring 240/120V AC 3-phase 4-wireDelta should only use those modules with a 3-phase tenant main provision.Features include:▪ 1-3 positions on 200amp devices▪ Field conversion from 200amp to 100amp breakers with no additional kits▪ 225 max tenant breaker capability▪ Horizontal breaker mounting reduces install time and effort▪ Centrally located neutral lugsK BaseSiemens line of modules featuring the Landis & Gyr bolt-in meter socket (K base) isthe most extensive in the industry. These modules are available in 1 position onlyand are available with 3-phase or single phase thru bus coupled with 3-phase orsingle phase tenant circuit breakers. Applications requiring 240/120V AC 3-phase4-wire Delta should only use those modules with a 3-phase tenant main provision.These modules should not be installed until the local utility has given approval.Features include:▪ factory installed 400amp Siemens circuit breaker▪ 400amp continuous/400amp max Landis & Gyr K base meter socket (K7 for threephase, type K5 for single phase)2-46Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersCommercial Meter Modules: Single Phase Lever BypassFeatures▪ High-quality Landis & Gyr HQ lever bypass block▪ Ground lugs mounted by each position▪ 225amp tenant main provisions▪ Floating deadfront eliminates need for 100amp conversion kits or filler plates▪ Centrally located neutral lugs▪ Compact size▪ 100,000 AIC RatingSelection2 METERCENTERSW1MM4225UFeatures▪ High-quality Landis & Gyr HQ lever bypass block▪ Factory installed 400amp tenant main breaker▪ 225amp tenant main provisions▪ One & Two position units now available▪ 42,000 AIC RatingW1MM24001-Phase, 3-Wire SN , Incoming and Outgoing, Ringless Type Lever Bypass Gangable Meter StacksThru-Bus Max Tenant MeterRating Breaker Positions Catalog List Maximum Dimensions Bypass(amps) (amps) Per Stack Number Price $ Breaker Provision AIC Height Width Depth Type KO Fig.1-Phase 4-Jaw Sockets, 1 Phase-3 Wire Thru-Bus 120/240V AC Max. -Lever Bypass1 W1MM1225U 2982.00100,000 23.75 23.50 9.13 Lever A20QP, QPH HQP, QPP,2 W1MM2225U 6136.00100,000 36.75 23.50 9.13 Lever A21225QPPH, HQPP,1200 3 W1MM3225U 9194.00100,000 49.75 23.50 9.13 Lever A22HQPPH4 W1MM4225U 12370.00 100,000 62.75 23.50 9.13 Lever A23400 1 W1MM1400 8358.00 JXD22B400 Factory inst. 42,000 57.00 26.00 8.66 Lever A24400 2 W1MM2400 12720.00 JXD22B400 Factory inst. 42,000 70.38 23.00 9.69 Lever A26 Dimensions shown are representative of boxdimensions and do not include allowances formounting bumps, hubs or hardware protrusions. Not for use on 3 phase-4 wire delta systems. Max. AIC determined by maximum AIC of tenantbreakers when used in conjunction with a meter socket.Higher overall ratings may be acheived thru approvedseries rating combinations. Alternate trip amerpages available. To order, add-amperage after catalog number (350amp becomesW1MM1400-350). List price remains the same. Contactsales office for lead time.Discount Schedule RESI Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-47

2METERCENTERSMeter CentersCommercial Meter Modules: 3-Phase Input with 1-Phase Output Lever BypassFeatures▪ High-quality Landis & Gyr HQ lever bypass block▪ Ground lugs mounted by each position▪ 225amp tenant main provisions▪ Floating deadfront eliminates need for 100amp conversion kits or filler plates▪ Centrally located neutral lugs▪ Compact size▪ 100,000 AIC RatingSelectionW2MM4AB225UFeatures▪ High-quality Landis & Gyr HQ lever bypass block▪ Factory installed 400amp tenant main breaker▪ One & Two position units now available▪ 42,000 AIC RatingW2MM2400AB3-Phase, 4-Wire SN, Incoming and 1-Phase, 3-Wire SN Outgoing, Ringless Type Lever BypassGangable Meter StacksThru-Bus Max Tenant MeterRating Breaker Positions Catalog List MaximumDimensions Bypass Stack Phasing:(amps) (amps) Per Stack Number Price $ Breaker Provision AIC Height Width Depth Type Phases/Socket KO Fig.1-Phase 5-Jaw Sockets, 3 Phase-4 Wire Thru-Bus 208Y/120V AC-Lever Bypass1 W2MM1225U 3056.00 65,000 23.75 23.50 9.13 Lever 1-AB A202 W2MM2AB225U 6090.00 65,000 36.75 23.50 9.13 Lever 1-AC, 1-BC A212 W2MM2BC225U 6090.0065,000 36.75 23.50 9.13 Lever 1-AC, 1-AB A22QP, QPH HQP, QPP,2 W2MM2CA225U 6090.0065,000 36.75 23.50 9.13 Lever 1-AB, 1-BC A23225QPPH, HQPP,1200 3 W2MM3225U 9022.00100,000 49.75 23.50 9.13 Lever 1-AB, 1-BC, 1-CA A204 W2MM4AB225U 12001.00HQPPH100,000 62.75 23.50 9.13 Lever 2-AB, 1-BC, 1-CA A214 W2MM4BC225U 12001.00 100,000 62.75 23.50 9.13 Lever 1-AB, 2-BC, 1-CA A224 W2MM4CA225U 12001.00 100,000 62.75 23.50 9.13 Lever 1-AB, 1-BC, 2-CA A23400 1 W2MM1400AB 8358.00 JXD22B400 Factory inst. 42,000 57.00 26.00 8.66 Lever 1-AB A24400 2 W2MM2400AB 13992.00 JXD22B400 Factory inst. 42,000 70.38 23.00 9.69 Lever 1-AB, 1-BC A26 Dimensions shown are representative of boxdimensions and do not include allowances formounting bumps, hubs, or hardware protrusions. Not for use on 3 phase-4 wire delta systems. Max. AIC determined by maximum AIC of tenantbreakers when used in conjunction with a meter socket.Higher overall ratings may be acheived thru approvedseries rating combinations. Alternate trip amerpages available. To order, add-amperage after catalog number (350amp becomesW1MM1400-350). List price remains the same. Contactsales office for lead time. Modules are factory phased. End user is responsible forbalancing each phase by selecting the correct modelnumber.2-48Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Meter CentersCommercial Meter Modules: Three Phase with Lever BypassFeatures▪ High-quality Landis & Gyr HQ lever bypass blockSelection▪ Ground lugs mounted by each position▪ Centrally located neutral lugs▪ Horizontal breaker mounting reduces install time and effort▪ 100amp modules save on tenant main cost2 METERCENTERSW3MM4200UW3MM3Features▪ High-quality Landis & Gyr HQ lever bypass block▪ 400amp tenant main breaker factory installed▪ One & Two position units now available▪ 42,000 AIC RatingW3MM14003-Phase, 4-Wire SN, Incoming and Outgoing, Ringless Type Lever Bypass Gangable Meter StacksThru-Bus Max Tenant MeterRating Breaker Positions Catalog List MaximumDimensions Bypass(amps) (amps) Per Stack Number Price $ Breaker Provision AIC Height Width Depth Type KO Fig.3-Phase 7-Jaw Sockets, 3 Phase-4 Wire Thru-Bus 208Y/120V AC Max. -Lever Bypass 1 W3MM1 3352.0065,000 29.11 20.21 8.93 LeverQP, QPH HQP2 W3MM2 6555.00 65,000 44.70 20.21 8.93 Lever1003 W3MM3 9681.00 65,000 61.20 20.21 8.93 Lever4 W3MM4 12942.00 65,000 77.70 20.21 8.93 Lever3-Phase 7-Jaw Sockets, 3 Phase-4 Wire Thru-Bus 240V AC Max. -Lever Bypass1200 1 W3MM1200U 3352.00100,000 23.75 23.50 9.13 Lever A20QJ, QH2, QJ2-H, HQJ2-H2 W3MM2200U 6555.00 100,000 36.75 23.50 9.13 Lever A212003 W3MM3200U 9681.00 100,000 49.75 23.50 9.13 Lever A224 W3MM4200U 12942.00 100,000 62.75 23.50 9.13 Lever A23400 1 W3MM1400 8358.00 JXD22B400 Factory inst. 42,000 57.00 26.00 8.56 Lever A24400 2 W3MM2400 15370.00 JXD22B400 Factory inst. 42,000 70.38 23.00 9.69 Lever A26 Dimensions shown are representative of outside boxdimensions and do not include allowances formounting bumps, hubs, or hardware protrusions. Accepts 3-pole 100amp maximum circuit breaker. Max. AIC determined by maximum AIC of tenantbreakers used in conjunction with meter socket. Higherratings may be acheived overall thru approved seriesrating combinations. Alternate trip amerpages available. To order, add-amperage after catalog number (350amp becomesW3MM1400-350). List price remains the same. 1 highunits only.Discount Schedule RESI Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-49

Meter CentersCommercial Meter Modules: K Base Bolt-In Meter ModulesFeaturesSelection▪ All modules feature the Landis & Gyr K5 (single phase) or K7 (three phase)Bolt-on Meter Base▪ 22,000 AIC RatingMETERCENTERS2Note: Users are advised to contact utility PRIOR to installation to verifyapproval. User assumes all responsibility for ensuring utility acceptanceprior to installation.1-Phase, 3-Wire SN, Incoming and Outgoing, Ringless Type Lever Bypass Gangable Meter StacksThru-Bus Max Tenant MeterRating Breaker Positions Catalog List Maximum Dimensions Stack Phasing:(amps) (amps) Per Stack Number Price $ Breaker Provision AIC Height Width Depth Phases/Socket KO Fig.1-Phase 5 Terminal Landis & Gyr K5 Bolt-In Socket, 1 Phase-3 Wire Thru-Bus 120/240V AC Max.-No Bypass1200 400 1 W1MM1400B 10029.00 JXD22B400 Factory inst. 22,000 47.94 29.83 8.66 — A253-Phase, 4-Wire SN, Incoming and 1-Phase, 3-Wire SN Outgoing, Ringless Type Lever BypassGangable Meter StacksThru-Bus Max Tenant MeterRating Breaker Positions Catalog List Maximum Dimensions Stack Phasing:(amps) (amps) Per Stack Number Price $ Breaker Provision AIC Height Width Depth Phases/Socket KO Fig.1-Phase 5 Terminal Landis & Gyr K5 Bolt-In Socket, 1 Phase-3 Wire Thru-Bus 120/240V AC Max.-No Bypass 1200 400 1 W2MM1400BAB 10029.00 JXD22B400 Factory inst. 22,000 47.94 29.83 8.66 1-AB A253-Phase, 4-Wire SN, Incoming and Outgoing, Ringless Type Lever Bypass Gangable Meter StacksThru-Bus Max Tenant MeterRating Breaker Positions Catalog List Maximum Dimensions Stack Phasing:(amps) (amps) Per Stack Number Price $ Breaker Provision AIC Height Width Depth Phases/Socket KO Fig.3-Phase 7 Terminal Landis & Gyr K7 Bolt-In Socket, 3 Phase-4 Wire Thru-Bus 240V AC Max.-No Bypass1200 400 1 W3MM1400B 10029.00 JXD22B400 Factory inst. 22,000 47.94 29.83 8.66 — A25 Dimensions shown are representative of outside boxdimensions and do not include allowances formounting bumps, hubs, or hardware protrusions. Not for use on 3 phase-4 wire delta systems. Maximum AIC determined by maximum AIC of tenantbreakers when used in conjunction with a meter socket.Higher ratings may be acheived thru approved seriesrating combinations. Alternate trip amerpages available. To order, add-amperage after catalog number (350amp becomesW3MM1400-350). List price remains the same. Leadtime applies.2-50Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Meter CentersModular Metering: Commercial Modules—Test Block BypassFeatures▪ EUSERC Compliant Test Block BypassSelection▪ Ground lugs mounted by each position▪ 225amp tenant breaker privisions (breakers not included)▪ Single phase modules available with three phase thru bussing▪ Horizontal breaker mounting reduces install time and effort▪ Floating deadfront eliminates need for 100amp conversion kits or filler plates2 METERCENTERSThru-Bus Maximum Socket MeterRating Tenant Continuous Positions Catalog List Breaker Max. Dimensions (inches) Stack Phasing KO(Amps) Breaker Duty Amps Per Stack Number Price $ Provisions AIC H W D Phases/Socket Fig.1-Phase, 3-Wire Feed & Tenant Mains 120/240V AC Max. 1200 225 200 1 W1MM1225USS 1468.00 QP, QPH, HQP, 100,000 26.5 25.5 9.0 — A271200 225 200 2 W1MM2225USS 2823.00 QPP, QPPH, 100,000 46.0 25.5 9.0 — A281200 225 200 3 W1MM3225USS 4215.00 HQPP, HQPPH 100,000 65.5 25.5 9.0 — A293-Phase, 4-Wire Feed & 1-Phase, 3-Wire Tenant Mains 120Y/208V AC Max. 1200 225 200 1 W2MM1225USS 1609.00 QP, QPH, HQP, 100,000 26.5 25.5 9.0 1-AB A271200 225 200 2 W2MM2AB225USS 2964.00 QPP, QPPH, 100,000 46.0 25.5 9.0 1-AC, 1-BC A281200 225 200 2 W2MM2BC225USS 2964.00 HQPP, HQPPH 100,000 46.0 25.5 9.0 1-AC, 1-AB A281200 225 200 2 W2MM2CA225USS 2964.00 100,000 46.0 25.5 9.0 1-AB, 1-BC A281200 225 200 3 W2MM3225USS 4356.00 100,000 65.5 25.5 9.0 1-AB, 1-BC, 1-AC A293-Phase, 4-Wire Feed & Tenant Mains 240V Max. 1200 225 200 1 W3MM1225USS 1779.00 QJ, QJH2, 100,000 26.5 25.5 9.0 — A271200 225 200 2 W3MM2225USS 3344.00 QJ2H, HQJ2H 100,000 46.0 25.5 9.0 — A281200 225 200 3 W3MM3225USS 4949.00 100,000 65.5 25.5 9.0 — A29 Not rated for use with 240/120V Delta systems. Rated for use with 240/120V Delta systems. Stacks will accept equivalent Murray circuit breakers.Discount Schedule RESISiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog2-51

Meter CentersModular Metering: Residential Modules Residential Meter Modules — 125A, 200A - 2 GangKnockout DiagramsWiring Diagrams2Catalog Number WMM2UWMM2200UMETERCENTERSKnockout DiagramsA11Catalog NumberWMM2UA16Catalog NumberWMM2200UWMM24AB200UWMM24BC200UWMM24CA200U Diagrams also applicable for suffix R, RC andRNJ products. Diagrams also applicable for 200A product.2-52Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersModular Metering: Residential Modules ▪ 2-high modules — suffix indicatesphases not used▪ 4-high modules — suffix indicatesphase with two socketsWiring Diagrams / Knockout Diagrams▪ 5-high modules — suffix indicatesphase with one socket in the moduleWiring DiagramsCatalog NumberWMM3UWMM3200UCatalog NumberWMM34U2 METERCENTERSKnockout DiagramsA12Catalog NumberWMM3UWMM34UA17Catalog NumberWMM3200UWMM34200U Diagrams also applicable for suffix R, RC andRNJ products.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-53

Meter CentersModular Metering: Residential Modules ▪ 2-high modules — suffix indicatesphases not used▪ 4-high modules — suffix indicatesphase with two socketsWiring Diagrams / Knockout Diagrams▪ 5-high modules — suffix indicatesphase with one socket in the moduleWiring Diagrams2Catalog NumberWMM4UWMM4200UCatalog NumberWMM44ABUCatalog NumberWMM44BCUCatalog NumberWMM44CAUMETERCENTERSA17Knockout DiagramsA13Catalog NumberWMM4UWMM44ABUWMM44BCUWMM44CAUA18Catalog NumberWMM4200UWMM44AB200UWMM44BC200UWMM44CA200U Diagrams also applicable for suffix R, RC andRNJ products.2-54Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersModular Metering: Residential Modules ▪ 2-high modules — suffix indicatesphases not used▪ 4-high modules — suffix indicatesphase with two socketsWiring Diagrams / Knockout Diagrams▪ 5-high modules — suffix indicatesphase with one socket in the moduleWiring DiagramsCatalog NumberWMM5UCatalog NumberWMM54ABUCatalog NumberWMM54BCUCatalog NumberWMM54CAU2 METERCENTERSKnockout DiagramsA14Catalog NumberWMM5UWMM54ABUWMM54BCUWMM54CAUA19Catalog NumberWMM54AB200UWMM54BC200UWMM54CA200UFor inches / millimeters conversion, see Application Datasection. Diagrams also applicable for suffix R, RC andRNJ products.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-55

Meter CentersModular Metering: Residential ModulesOutdoor3-Phase, 4-Wire, Incoming / 1-Phase,3-Wire, OutgoingAll 3-phase 4-wire meter modules havethe maximum possible degree ofphase balancing.Single phase sockets arefactory- connected to differentphases for automatic load balancing.Do not use single stator network meters.Wiring Diagrams / Knockout Diagrams▪ 2-high modules — suffix indicatesphases not used▪ 4-high modules — suffix indicatesphase with two sockets▪ 5-high modules — suffix indicatesphase with one socket in the module2Wiring DiagramsCatalog NumberWMM64UCatalog NumberWMM6UMETERCENTERSKnockout DiagramsA15Catalog NumberWMM6UWMM64UFor inches / millimeters conversion, see Application Datasection.Note: Diagrams also applicable for suffix R, RC andRNJ product.2-56Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersModular Metering: Main Switch Service Entrance ModulesInstallation DimensionsNo knockouts on sides of any modules.Knockout Diagrams2 METERCENTERSA1ACatalog NumberWMS4UWMS44UA1BCatalog NumberWMS6UWMS64UFor inches / millimeters conversion, see Application Datasection.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-57

Meter CentersService Entrance Modules - Main SwitchKnockout DiagramsMETERCENTERS2A1CCatalog NumberWMS8UWMS84UT Fuse ProvisionA1DCatalog NumberWMS12UWMS124UMolded Case Switch,ND63S120AFor inches / millimeters conversion, see Application Datasection.2-58Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersModular Metering: Tap Box & Main Switch ModulesKnockout DiagramsA2Catalog NumberWMTB8UWMTB84UA3Catalog NumberWMP02UWMP024U2 METERCENTERSA2ACatalog NumberWMS4UPBUWMS44UPBUWMS6UPBUWMS64UPBUWMS8UPBUWMS84UPBUFor inches / millimeters conversion, see Application Datasection.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog2-59

Meter CentersService Entrance Modules - Main Circuit BreakerKnockout DiagramsMETERCENTERS2A4ACatalog NumberWMC4WMC44A4BCatalog NumberWMC4BFWMC44BFA4CCatalog NumberWMC6WMC64A4DCatalog NumberWMC6BFWMC64BFFor inches / millimeters conversion, see Application Datasection.2-60Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersModular Metering: Main Breaker ModulesKnockout DiagramsA6ACatalog NumberWMC10WMC12WMC104WMC1242 METERCENTERSA5ACatalog NumberWMC7WMC74WMC8WMC84A6BCatalog NumberWMC10BFWMC12BFWMC104BFWMC124BFA5BCatalog NumberWMC7BFWMC74BFWMC8BFWMC84BFFor inches / millimeters conversion, see Application Datasection.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-61

Meter CentersModular Metering: Main Breaker & Tap Box ModulesKnockout DiagramsMETERCENTERS2A7ACatalog NumberWMC14WMC144WMC16WMC164A7BCatalog NumberWMC14BFWMC144BFWMC16BFWMC164BFA8Catalog NumberWMTB12UWMTB124UA9Catalog NumberWMTB16UWMTB164UFor inches / millimeters conversion, see Application Datasection.2-62Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersModular Metering: Pullbox & Lever Bypass ModulesKnockout DiagramsA10ACatalog NumberWMMB1400WMMB3400A10BCatalog NumberWMMB1800WMMB3800A10CCatalog NumberWMMB11200WMMB312002 METERCENTERSA30ACatalog NumberMC20A30BCatalog NumberMC20BFFor inches / millimeters conversion, see Application Datasection.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-63

Meter CentersModular Metering: Lever Bypass ModulesKnockout DiagramsFor Lever Bypass Modules OnlyA20Catalog NumberWXMM1XXXXA21Catalog NumberWXMM2XXXXMETERCENTERS2For Lever Bypass Modules OnlyA22Catalog NumberWXMM3XXXXA23Catalog NumberWXMM4XXXXFor inches / millimeters conversion, see Application Datasection. See table on page 2-49 for 3-Phase 100A stackdimensions.2-64Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersModular Metering: Lever Bypass ModulesCommercial Meter Modules, SpecificationsWith 5-Jaw, 1-Phase, 3-Wire Outgoing Landis & Gyr Meter SocketsWiring Diagrams1-Phase Incoming & Outgoing3-Phase Incoming & OutgoingMeter ModuleConfigurationAll 4 HighAll 3 HighAll 2 HighAll 1 HighWiring Diagram ReferencesAs ShownOmit Top MeterOmit Top Two MetersOmit Top Two and Bottom Meters2 METERCENTERSCatalog NumberW2MM1225UCatalog NumberW2MM2AB225UCatalog NumberW2MM2BC225UCatalog NumberW2MM2CA225UCatalog NumberW2MM3225UCatalog NumberW2MM4AB225UCatalog NumberW2MM4BC225UCatalog NumberW2MM4CA225USiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-65

Meter CentersModular Metering: Lever Bypass ModulesProvision for Type HD HubsProvision for HV Type HubsWiring and Knockout DiagramsMETERCENTERS2A24Catalog NumberW1MM1400W2MM1400ABW3MM1400A25Catalog NumberW1MM1400BW2MM1400BABW3MM1400BA26Catalog NumberWXMM2400For inches / millimeters conversion, see Application Data section.2-66Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersModular Metering: Test Block Bypass ModulesWiring and Knockout DiagramsA27A292 METERCENTERSA28Note: KO diagrams apply to test block bypass modules only.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-67

Meter CentersCommercial Meter ModulesWiring and Knockout DiagramsWiring Diagrams for 400A Plug-in and Bolt-in SocketEQUIPMENTGROUNDA B N2METERCENTERSW1MM1400ANBCW2MM1400CB NAW3MM1400W1MM1225USSW1MM2225USSW1MM3225USS2-68Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersModular Metering: Test Block Bypass ModulesWiring and Knockout DiagramsANBCANBCNEUTRALLUGSNEUTRAL (POTENTIAL JAW)EQUIPMENT GROUNDLINELOADLINELOAD2 METERCENTERSW2MM1225USSW2MM2AB225USSW2MM2BC225USSW2MM2CA225USSW2MM3225USSW3MM1225USSW3MM2225USSW3MM3225USSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog2-69

Meter CentersUni-Pak Metering: Technical InformationSelectionMETERCENTERS2Four-position All-in-One featuringangled breaker design.General InformationSiemens’ all new Uni-Pak Meteringoffers maximum flexibility and easeof installation to meet the servicerequirements of multiple positionmetering projects. The outdoor/indoordevices are available in two throughsix gang set-ups which consist of a pullsection with main lugs or stud terminations,and 4/5 jaw meter sockets with tenantcircuit breaker provisions.The units operate on 120/240V AC 1ø-3W systems and are available witheither 125 or 200 ampere meter socketsto meet a wide variety of smallapartment and commercial buildingapplications. A fifth jaw accessory kit isavailable for use on 120/208YV AC 1ø-3W network systems.The attractive Uni-Pak devices acceptoverhead or underground serviceterminations and are designed for wallhungsurface or semi-flush mounting.The devices are factory pre-bussed in acompact enclosure to ensure ease ofhandling and installation and to maximizewall-space efficiency.In addition to local code and NationalElectrical Code requirements, theserving utility may have specialrequirements for metering devices.Confirm utility acceptance prior toorder placement.Catalog Number LogicSiemens Uni-Pak MeteringDesign/Performance Features▪ Siemens’ exclusive 200 ampere/positionnon-lever bypass units feature angledbreaker for faster & easier installations▪ New Siemens’ exclusive floatingdeadfront on 200 ampere deviceseliminates need to line up breakers& covers▪ UL Listed for Service Equipment▪ UL Listed for use with 60/75°C wire▪ UL Listed for short circuit ratings upto 100,000 RMS symmetrical ampsat 240V AC▪ Outdoor/indoor construction▪ Overhead or underground service; loadtop, bottom or back▪ Front accessible 4 or 5-jaw socketswith individual ring or ringless typemeter covers▪ 125 amp sockets feed plug-in tenantbreakers through 125 amperes▪ 200 amp sockets feed plug-in tenantbreakers through 200 amps▪ All unmetered bus is barriered andsealable to prevent unauthorizedaccess▪ Compact wall-hung design for easeof handling and installation▪ Fifth jaw field installable at 3 or 9o’clock▪Four-position lever bypass All-in-One.NEWLever Bypass now availableSP6511RJLThree meter position All-In-One.▪ Electrodeposited paint providesuniform coverage for long-lastingprotection and sharp appearance▪ Meets EUSERC specifications whenNEMA stud kit and flange kit(if required) are field-added (notavailable for lever bypass versions)Technical InformationUni-Pak devices are UL listed under file#E27100 as service entrance equipment.Complete SelectionNumber ofMeter Jaws 4 or 5Voltage 240V AC MaximumAmperes (per 125 amp or 200 ampMeter position) MaximumAmperes (Bus) 800 amps MaximumTenant Main Provisions for plug-in tenantBreakers circuit breakers through 200ANumber ofMeter Positions 2, 3, 4, 5 or 6Service Overhead or undergroundwith load top, bottom or backIndustry SpecificationsAll-In-One residential group meteringunits comply with the following industrystandards.ANSI — Standard #C 12.7-1987NEMA — Standard #250-1985UL — File #E27100UL — Standard #50, 67, 414Bus Rating8 = 800 Amp6 = 600 Amp5 = 500 Amp4 = 400 Amp3 = 300 Amp2 = 200 Amp0 = no bussing# of Positions6 = 6 position5 = 5 position4 = 4 position3 = 3 position2 = 2 positionPhase1 = 1-PhaseSKT Rating1 = 125 Amp max2 = 200 Amp maxCover Typeblank = ring typeR = ringless# of Jawsblank = 4-JawJ = 5-JawBypass Typeblank = no bypassB = horn bypassL = lever bypass2-70Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersUni-Pak Metering: Selection-Ring StyleSmaller, morecompact design!enclosures arelighter and useless wall spaceDouble barrelconnectorsavailable forparallel feed.Stud Kits for linecompression lugsavailableMore securedesign!greater utilityacceptanceMeets EUSERCrequirements whenstud kit is installedSingle-piecetenant cover!easy installationFloatingdeadfront!eliminatesneed forcoveralignmentDead frontknockouts -makes200amp to100ampconversionseasyAngledcircuitbreaker forease ofinstallation!CentrallylocatedneutralminimizesneutralconductorlengthBack andBottom Exitfor loadconductors1-Phase, 3-Wire SN, Ring Type, Uni-Pak Meter CenterFeatures▪ Individual split covers▪ UL Listed for 60 / 75°Cconductors. See equipmentmarkings for applications▪ For small apartmentbuildings, small professionaland commercial buildings▪ Completely self-containedmeter centers▪ Two to six 125A and 200Asockets breaker positions▪ Outdoor surface mountedenclosures▪ Compact, pre-bussed, easyto handle, hang and wireSP6512Selection▪ Barriered, sealablecompartment forunmetered current-carryingparts▪ Al/Cu lay-in lugs, excepttwo socket units▪ Top or bottom feed▪ Bottom and rear branchwiring exits (Neutral andground at bottom only)▪ ANSI #61 light grayelectrodeposited paint onzinc-coated G90 steel▪ Meets EUSERCspecifications when NEMAstud kit and flushing ring (ifrequired) is field addedContinuousMeterDuty Amps Bus Positions Catalog Breaker Maximum Dimensions 5th Jaw Line LugsPer Position Amperage Per Pak Number Provision AIC Height Width Depth Assembly Wire Range List Price $2 METERCENTERS1-Phase, 4-Jaw Sockets, 120/240V AC Max.200 2 SP2211 65,000 37.63 13.67 6.00 ECMM5J #6-300 kcmil 1242.00300 3 SP3311 65,000 38.40 25.50 7.50 ECMM5J #6-300 kcmil 1494.00400 4 SP4411 65,000 47.40 25.50 7.50 ECMM5J 1/0-750 MCM CU-AL 2122.00125 400 5 SP4511 QP65,000 38.40 39.20 7.50 ECMM5J or (2) 1/0-250 AL 2686.00400 6 SP4611 QPH 65,000 38.40 39.20 7.50 ECMM5J or (2) 1/0-3/0 CU 3113.00500 4 SP5411 HQP 65,000 47.40 31.50 7.50 ECMM5J 2636.00600 5 SP6511 65,000 38.40 45.20 7.50 ECMM5J (2) #2-600 kcmil 3038.00600 6 SP6611 65,000 38.40 45.20 7.50 ECMM5J 3640.00400 2 SP4212 100,000 31.50 29.50 7.50 ECMM5J 1/0-750 MCM CU-AL 1749.00400 3 SP4312 QP 100,000 38.44 29.50 7.50 ECMM5J or (2) 1/0-250 AL 2587.00200 400 4 SP4412QPH100,000 47.44 29.50 7.50 ECMM5J or (2) 1/0-3/0 CU 3392.00HQP600 4 SP6412 QPP 100,000 47.44 35.50 7.50 ECMM5J 3740.00600 5 SP6512 QPPH 100,000 38.44 53.10 7.50 ECMM5J (2) #2-600 kcmil 4371.00600 6 SP6612HQPP100,000 38.44 53.10 7.50 ECMM5J 5127.00HQPPH800 6 SP8612 100,000 38.44 53.10 7.50 ECMM5J 5625.00 Dimensions shown are representative of outside boxlength, width, & depth and do not include allowances formounting bumps, endwalls, covers, hubs or hardwareprotrusions. Order NSK600 and PLK600 kits for use with SP8612. CUCable only approved with 800A device.Discount Schedule RESIFlushing Rail Kits: Description List Price $125 Amps per positionSP221FK 2 Gang 200 amp bus 124.00SP331FK 3 Gang 300 amp bus 145.00SP441FK 4 Gang 400 amp bus 145.00SP4561FK 5&6 Gang 400 amp bus 145.00SP6561FK 5&6 Gang 600 amp bus 145.00200 Amps per positionSP422FK 2 Gang 400 amp bus 145.00SP432FK 3 Gang 400 amp bus 145.00SP442FK 4 Gang 400 amp bus 145.00SP642FK 4 Gang 600 amp bus 145.00SP6562FK 5&6 Gang 600 amp bus 145.00Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-71

2METERCENTERSMeter CentersUni-Pak Metering: Selection-Ringless Style Smaller, morecompact design!enclosures arelighter and useless wall spaceFactory options!5th jaw and hornbypassDouble barrelconnectorsavailable forparallel feed.Stud Kits for linecompression lugsavailableMore securedesign!greater utilityacceptanceSingle-piecetenant cover!easy installationFloatingdeadfront!eliminatesneed forcoveralignmentDead frontknockouts -makes200amp to100ampconversionseasyAngledcircuitbreaker forease ofinstallation!CentrallylocatedneutralminimizesneutralconductorlengthBack andBottom Exitfor loadconductorsFeatures▪ Ringless meter construction▪ Individual split covers withbarrel lock compatibility▪ Available with horn bypassfactory installed▪ UL Listed for 60/75°Cconductors See equipmentmarkings for applications▪ For small apartmentbuildings, small professionaland commercial buildings▪ Completely self-containedmeter centers▪ Two to six 125A and 200Asockets breaker positionsSP3311RJSelection▪ Compact, pre-bussed, easyto handle, hang and wire▪ Barriered, sealablecompartment forunmetered current-carryingparts▪ AI/Cu lay-in lugs, excepttwo socket units▪ Top or bottom feed▪ Bottom and rear branchwiring exits (Neutral andground at bottom only)▪ ANSI #61 light greyelectrodeposited paint onzinc-coated steel▪ 5th jaw kit included witheach unit1-Phase, 3-Wire SN, Ringless Type, Uni-Pak Meter Center - No Bypass & Horn BypassContinuousMeterHornDuty Amps Bus Positions Catalog Breaker Maximum Dimensions 5th Jaw Bypass Line LugsPer Position Amperage Per Pak Number Provision AIC Height Width Depth Assembly Kit Wire Range List Price $1-Phase, 5-Jaw Sockets, 120/240V AC Max.200 2 SP2211RJ 65,000 37.50 13.50 6.00 Included ECHBK #6-300 kcmil 1342.00200 2 SP2211RJB 65,000 37.50 13.50 6.00 Included Installed #6-300 kcmil 1341.00300 3 SP3311RJ 65,000 37.50 25.50 7.50 Included ECHBK #2-600 kcmil 1673.00300 3 SP3311RJB MP2211RJ 65,000 37.50 25.50 7.50 Included Installed #2-600 kcmil 1597.00400 4 SP4411RJ 65,000 37.50 25.50 7.50 Included ECHBK 2348.00400 4 SP4411RJB 65,000 37.50 25.50 7.50 Included Installed 2348.001/0-750 MCM CU-AL125 400 5 SP4511RJ QP 65,000 37.50 39.20 7.50 Included ECHBK2938.00or (2) 1/0-250 AL400 5 SP4511RJB QPH 65,000 37.50 39.20 7.50 Included Installed2938.00or (2) 1/0-3/0 CU400 6 SP4611RJ HQP 65,000 37.50 39.20 7.50 Included ECHBK3442.00400 6 SP4611RJB 65,000 37.50 39.20 7.50 Included Installed 3292.00600 5 SP6511RJ 65,000 37.50 45.20 7.50 Included ECHBK 3340.00600 5 SP6511RJB 65,000 37.50 45.20 7.50 Included Installed 3340.00(2) #2-600 kcmil600 6 SP6611RJ 65,000 37.50 45.20 7.50 Included ECHBK3947.00600 6 SP6611RJB 65,000 37.50 45.20 7.50 Included Installed 3793.00400 2 SP4212RJ 100,000 31.50 29.50 7.50 Included ECHBK 1875.00400 2 SP4212RJB 100,000 31.50 29.50 7.50 Included Installed 1822.001/0-750 MCM CU-AL400 3 SP4312RJ QP 100,000 38.44 29.50 7.50 Included ECHBK2763.00or (2) 1/0-250 AL400 3 SP4312RJB QPH 100,000 38.44 29.50 7.50 Included Installed2686.00400 4 SP4412RJ HQPor (2) 1/0-3/0 CU100,000 47.44 29.50 7.50 Included ECHBK3589.00200 400 4QPPSP4412RJB 100,000 47.44 29.50 7.50 Included Installed 3467.00QPPH600 5 SP6512RJ 100,000 38.44 53.10 7.50 Included ECHBK 4497.00HQPP600 5 SP6512RJB 100,000 38.44 53.10 7.50 Included Installed 4371.00HQPPH(2) #2-600 kcmil600 6 SP6612RJ 100,000 38.44 53.10 7.50 Included ECHBK5300.00600 6 SP6612RJB 100,000 38.44 53.10 7.50 Included Installed 5125.00800 6 SP8612RJ 100,000 38.44 53.10 7.50 Included ECHBK 5625.00 Dimensions shown are representative of outside boxlength, width, & depth and do not include allowances formounting bumps, endwalls, covers, hubs or hardwareprotrusions. Order ECMMI5J for insulated 5th jaw. Fifth terminal forRJ devices is included, but not installed. Order NSK600 and PLK600 kits for use with SP8612RJ.CU Cable only approved with 800A device.2-72 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Meter CentersUni-Pak Metering: Ringless Style with Lever BypassFactory installed5th jawSiemens exclusivefloating deadfrontIndependentground lugsCentrally locatedneutrals225 amp tenantbreakers100K AIC ratedRated for Siemensor Murray breakersMounting railincluded foreasy installationDual hub provisionsup to 4"High qualityLandis & GyrHQ Lever BypassGenerous wiringspaceeasy accessconnections3/8" studs on lineconnectionschoose 1, 2, 3conductor lug kitsSide mountedhandles foreasy liftingInsulating barrierprovidesadditional safetyInline columnconstruction for24 position.56 positionavailable.SelectionThe newly designed line of PAK meteringfrom Siemens is now available for thoseutilities that require a lever bypass forresidential & commercial applications. PAKMetering provides an all-in-one solution forapplications needing from 2–6 meterpositions. The products are designed for easyinstallation and include features not found oncompetitors, including:▪ Side mounted handles to help in lifting▪ “Floating” deadfront to help breakeralignment▪ Provisions for one, two, or three incomingconductors per phase and neutral▪ Hanging bracket to suspend the unit duringinstallation▪ 225 amp branch tenant provisions @100,000 AIC▪ Full line of 2–6 position devices▪ “In-line” (column) construction for 2–4position devicesSiemens PAK metering has passed rigoroustesting and has been accepted by many ofthose utilities that require a lever bypass.Note: KO diagrams located on page 2-80.2 METERCENTERSBarrel lock provisions for greater utility acceptanceContinuous Maximum MeterDuty Amps Tenant Bus Positions Catalog List Breaker Maximum Dimensions (inches) 5th Jaw LinePer Position Breaker Amperage Per Pak Number Price $ Provision AIC Height Width Depth @ 9:00 Lugs 1-Phase 5-Jaw sockets, 120/240V AC Max.400 2 SP4212RJL 3074.00 QP, QPH, HQP, 100,000 36.75 35.90 9.00 Installed 3/8"3 SP4312RJL 4611.00 QPP, QPPH, 100,000 49.75 35.90 9.00 Installed Stud200 225 4 SP4412RJL 6148.00 HQPP, HQPPH 100,000 62.75 35.90 9.00 Installed Field600 5 SP6512RJL 7685.00 100,000 49.75 57.68 9.00 Installed Installed6 SP6612RJL 9063.00 100,000 49.75 57.68 9.00 Installed Lugs Dimensions shown are representative of outside boxlength,width, and depth and do not includeallowances for mounting bumps, endwalls, covers,hubs, or hardware protrusions. Line lugs are not included. Please order lugs fromchart below. A barrel lock provision is included with each meteredposition.Lug KitsLugCatalog Wire ListNumber Range Price $H56476 3/0-800/94 kcmil 44.00H60162 (2) 1/0-250 kcmil OR 44.00(1) #4-600 kcmilH68752-1 (3) #6-250 kcmil 74.00H56732-2 (2) #4-350 kcmil 35.00H56732-M (2) #4-500 kcmil 56.00Note: Lug kits should be chosen based on thewire size being run to the unit. Wire should besized according to the National Electrical Code.A total of 3 lugs are required to wire the line sideof the device.Hub KitsSize Catalog List(inches) Number Price $2 EC56854 178.922.5 EC56855 178.923 EC56856 178.923.5 EC56857 263.064 EC56858 119.28Closure EC56933S 76.68PlateDiscount Schedule RESISiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-73

Meter CentersUni-Pak Metering: AccessoriesSelectionMETERCENTERS2ECHS125NSK400SUK350TAAccessories for All-In-One UnitsCatalogDescription Number List Price $5th Jaw Kit All TypesGrounded ECMM5J 23.50Insulated ECMMI5J 20.50Bypass Kits Horn Bypass Kit ECHBK 149.00Cover PlateRing Style ECPP 19.00Ringless Style ECP3 19.00Sealing RingsSnap-On Type Aluminum SRSS 19.38Screw Type Stainless Steel SRSW 25.03Filler Plates1" Filler Plate ECQF3 14.204" to 2" Filler Plate ECCP3U 14.20NEMA Stud Kits (Meets EUSERC Requirements) 400 Amp Bus NEMA Stud Kit NSK400 157.00600 Amp Bus NEMA Stud Kit NSK600 207.00CatalogDescription Number List Price $Lugs for NEMA Stud Kits (2) #6-350 kcmil SUK350TA 54.00(1) #2-600 kcmil SUK600TA 49.00(2) #500-1000 kcmil SUK1000TA 64.00Alternate Lug Kits 400 Amp Bus Lug Kit (2) #4-250 PLK400 183.00600 Amp Bus Lug Kit (3) #6-250 PLK600 183.00Type “HD” Conduit Hubs2" Conduit Hub EC56854 178.922 1 ⁄2" Conduit Hub EC56855 178.923" Conduit Hub EC56856 178.923 1 ⁄2" Conduit Hub EC56857 263.064" Conduit Hub EC56858 119.28Closure Plate EC56933S 76.68Type “RX” Conduit Hubs3⁄4" Conduit Hub EC38594 022.901" Conduit Hub EC38596 37.811 1 ⁄4" Conduit Hub EC38597 37.811 1 ⁄2" Conduit Hub EC38598 23.962" Conduit Hub EC38599 23.962 1 ⁄2" Conduit Hub EC38600 107.57Closure Plate EC38595 38.34Adapter plate for HD/RX EC9747-1113 27.00 Not for use on lever bypass units. Order NSK600 and PLK600 kits for use with 800 AmpPAK. CU Cable only approved with 800A device. Use Adapter plate with RX hubs for PAK units. These items made of Adapter plate and equivalent RXhub.2-74 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Meter CentersUni-Pak MeteringWiring DiagramsNABABAB2 METERCENTERS2 position 125 AmpEquip. Grd.2 position 200 AmpNABABNABABNABABABABEquip. Grd.ABN3 position 125 & 200 AmpEquip. Grd.4 position 125 & 200 AmpABABABABNABABABNABABABABABABEquip. Grd.Equip. Grd.NNNN5 position 125 & 200 Amp 6 position 125 & 200 AmpSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-75

Meter CentersUni-Pak MeteringWiring, Dimensional & Knockout DiagramsMETERCENTERS24 9 ⁄64"2 13 ⁄16"6213/1655/81615/16(1) RemovableHub PlateCovering HDType HubOpening ( Max.4" Conduit)13 1 ⁄2"8 13 ⁄32" 5 3 ⁄32"(2) Removable HUB platecovering HD Type Hubopening (Max. 4" Conduit)251/24 1 ⁄8"9 "937 1 ⁄2"387/16918 1 ⁄2"(2) K.O.'s for 0.50"0.75", 1", 1.25", 1.5"2", 2.5" Conduit211/2173/411 1 ⁄4"141213/168 5 ⁄8"3 3 ⁄4"2 3 ⁄4"21/45(1) K.O.'s for 1",1.25", 1.5", 2",2.5", 3" Conduit5 3 ⁄4"3 7 ⁄16"2 3 ⁄8"(2) 0.312" DIA K.O.'s(1) K.O. for 0.50", 0.75",1", 1.25", 1.5" Conduit(2) K.O.'s for0.50" Conduit1 9 ⁄16"6 3 ⁄4"1 23 ⁄32"10 7 ⁄32"3 21 ⁄32"3⁄4"2 17 ⁄32"(2) K.O.'s for 0.50",0.75", 1", 1.25", 1.5",2" Conduit1 1 ⁄2" 1 11 ⁄16"1 1 ⁄16"1 13 ⁄16"4 1 ⁄16"(1) K.O. for .5",.75", 1" Conduit71/267/162", 2.5", 3", 3.5", 4" KO's withprovisions (Max. 4" Conduit)27/851/211/16233/43 3/ 16TYP(2) .312" Dia K.O.'s173/321313/16(6) K.O. for .50", .75'",1", 1.25", 1.5", 2", 2.5",3" Conduit619/32(6) K.O. for .50", .75'",1", 1.25", 1.5", 2", 2.5",3" Conduit313/3223/8113/1651/8SP2211XSP3311X2-76Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersUni-Pak MeteringWiring, Dimensional & Knockout Diagrams55/82015/165 5 /820 15 /16213/162 13 /16(2) Removable HUB platecovering HD Type Hubopening (Max. 4" Conduit)291/2(2) Removable HUB platecovering HD Type Hubopening (Max. 4" Conduit)29 1 /22 METERCENTERS99311/238 7 /169211/2173/414123/421 1 /217 3 /41412 3 /4519/32215/325 19 /32(1) K.O. for .5",.75", 1" Conduit71/267/162", 2.5", 3", 3.5", 4" KO's withprovisions (Max. 4" Conduit)27/851/211/16273/43 3/ 16 TYP(2) .312" Dia K.O.'s213/321713/16(5) K.O. for .50", .75'",1", 1.25", 1.5", 2", 2.5",3" Conduit(5) K.O. for .50", .75'",1", 1.25", 1.5", 2", 2.5",3" Conduit43/427/821/1653/16(1) K.O. for .5",.75", 1" Conduit7 1 /26 7 /162", 2.5", 3", 3.5", 4' KO's withprovisions (Max. 4" Conduit)2 7 /85 1 /211/1627 3 /43 3 /16 TYP(2) .312" Dia K.O.'s17 13 /1621 3 /32(5) K.O. for .50", .75'",1", 1.25", 1.5", 2", 2.5",3" Conduit(5) K.O. for .50", .75'",1", 1.25", 1.5", 2", 2.5",3" Conduit4 3 /42 7 /82 15 /322 1 /165 3 /16SP4212R/RJ/RJBSP4312R/RJ/RJB5 5/816 15/165 5/820 15/162 13/162 13/16(2) Removable HUB platecovering HD Type Hubopening (Max. 4" Conduit)(2) Removable HUB platecovering HD Type Hubopening (Max. 4" Conduit)25 1/229 1/2999947 7/1647 7/1630 1/2263/4239301/2 9263/42312 3/412 3/4(1) K.O. for .5",.75", 1" Conduit7 1/22", 2.5", 3", 3.5", 4" KO's withprovisions (Max. 4" Conduit)67/1627/85 1/223 3/411/163 3/ 16 TYP(2).312" Dia K.O.'s1313/16173/32521/4(6) K.O. for .50", .75'",1", 1.25", 1.5", 2", 2.5",3" Conduit6(6) K.O. for .50", .75'",19/321", 1.25", 1.5", 2", 2.5",3" Conduit3 13/322 3/81 13/165 1/8(1) K.O. for .5",.75", 1" Conduit71/267/1627/82", 2.5", 3", 3.5", 4" KO's withprovisions (Max. 4" Conduit)5 1/211/16519/32215/32(5) K.O. for .50", .75'",1", 1.25", 1.5", 2", 2.5",3" Conduit273/4(5) K.O. for .50", .75'",1", 1.25", 1.5", 2", 2.5",3" Conduit53/1621/163 3/ 16 TYP(2) .312" Dia K.O.'s 27/843/41713/1621 3/32SP4411XSP4412R/RJ/RJBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-77

Meter CentersUni-Pak MeteringWiring, Dimensional & Knockout Diagrams5 5/816 15/165 5/816 3/42 13/162 13/162(2) Removable HUB platecovering HD Type Hubopening (Max. 4" Conduit)(2) Removable HUB platecovering HD Type Hubopening (Max. 4" Conduit)METERCENTERS39 3/1639 3/169938 7/1638 7/16991417 3/421 1/212 3/41417 3/421 1/212 3/46 19/32(1) K.O. for .5",.75", 1" Conduit23 3/4521/4(12) K.O. for .50", .75'",1", 1.25", 1.5", 2", 2.5",3" Conduit6(12) K.O. for .50", .75'",19/321", 1.25", 1.5", 2", 2.5",3" Conduit6 19/3223 3/4521/4(12) K.O. for .50", .75'",1", 1.25", 1.5", 2", 2.5",3" Conduit6(12) K.O. for .50", .75'",19/321", 1.25", 1.5", 2", 2.5",3" Conduit7 1/21 13/163 13/326 7/163 3/ 16 TYP2 7/82", 2.5", 3", 3.5", 4" KO's withprovisions (Max. 4" Conduit)5 1/211/163 3/ 16 TYP(2).312" Dia K.O.'s1313/16173/323 13/322 3/81 13/165 1/87 1/21 13/163 13/326 7/163 3/ 16 TYP2 7/82", 2.5", 3", 3.5", 4" KO's withprovisions (Max. 4" Conduit)5 1/211/163 3/ 16 TYP(2).312" Dia K.O.'s1313/16173/323 13/322 3/81 13/165 1/8SP4511XSP4611X5 5/819 15/165 5/823 3/42 13/162 13/16(2) Removable HUB platecovering HD Type Hubopening (Max. 4" Conduit)(2) Removable HUB platecovering HD Type Hubopening (Max. 4" Conduit)31 1/2351/29947 7/169947 7/169912 3/412 3/455 19/322 1/42 15/32(1) K.O. for.5" Conduit(2) .312" Dia K.O.'s239/162223/32(6) K.O. for .50", .75",1", 1.25", 1.5", 2", 2.5",3" Conduit(6) K.O. for .50", .75",619/321", 1.25", 1.5", 2", 2.5",3" Conduit(1) K.O. for.5" Conduit(2) .312" Dia K.O.'s271/4263/8(5) K.O. for 1",1.25", 1.5", 2", 2.5",3" Conduit(5) K.O. for 1",1.25", 1.5", 2", 2.5",3" Conduit71/233/427/82", 2.5", 3", 3.5", 4" KO's withprovisions (Max. 4" Conduit)7 13/1623/415/1611/16(1) K.O. for .5", 3 3/ 16 TYP.75", 1", 1.25" Conduit2229/32193 13/322 3/81 13/165 1/871/227/815/162", 2.5", 3", 3.5", 4" KO's withprovisions (Max. 4" Conduit)7 13/1633/423/411/16(1) K.O. for .5",3 3/.75", 1", 1.25" Conduit 4 TYP2619/322221/324 3/42 7/82 1/165 3/16SP5411XSP6412R/RJ/RJB2-78Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersUni-Pak MeteringWiring, Dimensional & Knockout Diagrams5 5/819 15/165 5 /823 23 /322 13/162 13 /16(2) Removable HUB platecovering HD Type Hubopening (Max. 4" Conduit)45 3/16(2) Removable HUB platecovering HD Type Hubopening (Max. 4" Conduit)53 1 /82 METERCENTERS9938 7 /1638 7/169912 3/412 3 /45 19 /327 1/21 13/16(1) K.O. for.5" Conduit(2) .312" Dia K.O.'s33/427/83 3/ 16 TYP313/322", 2.5", 3", 3.5", 4" KO's withprovisions (Max. 4" Conduit)7 13/16239/162223/3223/415/1611/16(1) K.O. for .5", 3 3/ 16 TYP.75", 1", 1.25" Conduit2229/3219521/4(12) K.O. for .50", .75",1", 1.25", 1.5", 2", 2.5",3" Conduit619/32(12) K.O. for .50", .75",1", 1.25", 1.5", 2", 2.5",3" Conduit51/823/8113/16313/327 1 /22 7 /84 3 /43 3 /4 TYP2", 2.5", 3", 3.5", 4" KO's withprovisions (Max. 4" Conduit)(1) K.O. for.5" Conduit(2) .312" Dia K.O.'s27 1 /426 13 /32(10) K.O. for 1",1.25", 1.5", 2", 2.5",3" Conduit33 5 /4 32 /167 /82 3 /415/162 1 /167 13 /1611/16(1) K.O. for .5",3 3 /4 TYP.75", 1", 1.25" Conduit26 19 /3222 11 /164 3 /42 7 /82 15 /32(10) K.O. for 1",1.25", 1.5", 2", 2.5",3" ConduitSP6511XSP6512R/RJ/RJB5 5/819 15/165 5/823 23/322 13/162 13/16(2) Removable HUB platecovering HD Type Hubopening (Max. 4" Conduit)(2) Removable HUB platecovering HD Type Hubopening (Max. 4" Conduit)45 3/1653 1/89938 7/1638 7/169912 3/412 3/45 19/327 1/21 13/16(1) K.O. for.5" Conduit(2) .312" Dia K.O.'s33/427/83 3/ 16 TYP313/322", 2.5", 3", 3.5", 4" KO's withprovisions (Max. 4" Conduit)7 13/16521/4(12) K.O. for .50", .75",1", 1.25", 1.5", 2", 2.5",3" Conduit239/162223/32619/32(12) K.O. for .50", .75",1", 1.25", 1.5", 2", 2.5",3" Conduit51/823/423/815/1611/16(1) K.O. for .5", 3 3/ 16 TYP 113/16.75", 1", 1.25" Conduit313/322229/32197 1/22 7/84 3/43 3/ 4 TYP2", 2.5", 3", 3.5", 4" KO's withprovisions (Max. 4" Conduit)(1) K.O. for.5" Conduit(2) .312" Dia K.O.'s3 3/42 7/87 13/161 5/162 3/4271/42613/3211/16(1) K.O. for .5", 3 3/ 4 TYP.75", 1", 1.25" Conduit2619/322211/16(10) K.O. for 1",1.25", 1.5", 2", 2.5",3" Conduit4 3/42 7/82 1/162 15/32(10) K.O. for 1",1.25", 1.5", 2", 2.5",3" Conduit5 3/16SP6611XSP6612R/RJ/RJBSP8612R/RJ/RJBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-79

Meter CentersUni-Pak Metering: Lever BypassWiring, Dimensional & Knockout DiagramsMETERCENTERS2Note:2, 3, 4 gangmodels arethe samedimensionson the topand bottom.SP4312RJLSP4412RJLSP4212RJLNote:5 & 6 gangmodels usethe samedimensions.SP6512RJLSP6612RJL2-80Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Meter CentersAccessories: Modular & PAK MeteringSelectionCatalog ListDescription Number Price $Modular Metering AccessoriesSingle Bolt Joint, 1-Phase, 3-Wire, 1200A maximum SBJ1 364.00Single Bolt Joint, 3-Phase, 4-Wire, 1200A maximum SBJ4 401.00Indoor Bussed Elbow, 1-Phase, 3-Wire,1200A maximumBE1 1470.00Indoor Bussed Elbow, 3-Phase, 4-Wire,1200A maximumBE4 1586.00Outdoor Bussed Extension, 1-Phase, 3-Wire,1200A maximumWMEX1U 873.00Outdoor Bussed Extension, 3-Phase, 4-Wire,1200A maximumWMEX4U 1088.00Pass-Thru Bushing-for use withUnderground Pull BoxWMMBK 216.00End Closure Plate WMEP 42.503/4" HR Type Hub for Service Entrance Module ECHR075 40.001" HR Type Hub for Service Entrance Module ECHR100 39.501-1/4" HR Type Hub for Service Entrance Module ECHR125 39.501-1/2" HR Type Hub for Service Entrance Module ECHR150 40.002" HR Type Hub for Service Entrance Module ECHR200 70.002" HV Type Hub for Service Entrance Module ECHV200 91.002-1/2" HV Type Hub for Service Entrance Module ECHV250 125.003" HV Type Hub for Service Entrance Module ECHV300 182.003-1/2" HV Type Hub for Service Entrance Module ECHV350 274.004" HV Type Hub for Service Entrance Module ECHV400 362.00PAK Metering Accessories2" HD Type Hub for New Uni-PAK EC56854 178.922-1/2" HD Type Hub for New Uni-PAK EC56855 178.923" HD Type Hub for New Uni-PAK EC56856 178.923-1/2" HD Type Hub for New Uni-PAK EC56857 263.064" HD Type Hub for New Uni-PAK EC56858 119.28Closure Plate for HD Hub Opening EC56933S 76.68Nema Stud Kit for New 400A Uni-PAK NSK400 157.00Nema Stud Kit for New 600A Uni-PAK NSK600 207.00Parallel Lug Kit for New 400A Uni-PAK (2) 250 kcmil PLK400 183.00Parallel Lug Kit for New 600A Uni-PAK (3) 250 kcmil PLK600 183.00Bussed Elbow permits thecontinuation of the main busaround corners to adjacent wall.Indoor use only.Bussed Corner ElbowSBJ1WMEX1U SpacerBussed SpacerSBJ4Included with each meter stack. Not included with mains ortap boxes - order separately if using a switch, breaker, or tapbox module on the load side.2 METERCENTERSCatalog ListDescription Number Price $Universal PAK & MOD Access.Sealing Ring- Snap-on, Stainless Steel SRSS 19.38Sealing Ring- Screw-type, Stainless Steel SRSW 25.03Sealing Ring- Snap-on, Aluminum SRSTD 17.472-pole Bank Filler Plate ECCP1U 14.20QP 125A Max Breaker 4-pole Blank Filler Plate ECCP2U 14.20QPP 225A Max Breaker 4-pole Blank Filler Plate ECCP3U 14.20With QP (2" wide) 125A breaker installedPlastic Cover Plate- for ring style socket ECPP 19.00Plastic Cover Plate- for ringless style socket ECCP3U 14.20Meter By-pass Jumper 4&5 Jaw ECJS 36.745th Jaw Kit for Modular Metering -3, 6, 9 O’clock PositionsECMM5J 23.50Ins. 5th Jaw Kit for Modular Metering -3, 6, 9 O’clock PositionsECMMI5J 20.50 For use on 125 & 200Amp sockets only. One pass thru bushing supplied with each WMMB device When adding modular metering modules to oldinstallation, replace metal end closure plate with plasticend closure plate. Item is a kit consisting of adapter plate & RX type hub. For use on old and new style pak units. Filler plate is not needed for NEW PAK. (2) Required per 1-Phase meter socket. Residential typering and ringless- 200amp max. Meter cannot beinstalled while in use. For use with ECPP cover plate. Modular units only. Add “12” suffix for 12" elbow: BE112 and BE412.For inches / millimeters conversion, see Application Data section.Discount Schedule RESISiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-81

Meter CentersModular Metering Peplacement Parts KitsSelectionMETERCENTERS2▪ Eliminate the need for Special orders▪ Stocked and ready for shipment▪ All kits come with appropriate hardware and instruction sheet for safe installation▪ Packages are stocked in specified Quantities and cannot be substituted or changedPart Number Description Contents List Price $Breaker CoversGMBC1 Group Metering Breaker Cover - 125Amp Positions One Top and bottom black plastic breaker 10.00cover piece, 1 gasket, and a locking clipGMBC2 Group Metering Breaker Cover - 200Amp Positions Top and bottom black plastic breaker cover 10.00pieces, gasket, and locking clipMeter Covers MMCVR1 Modular Metering Tenant Covers 125A Ring Style 1 Ringstyle meter cover welded with 10.00support brackets and paintedMMCVR1R Modular Metering Tenant Covers 125A Ringless 1 Ringless style meter cover welded with 10.00support brackets and paintedMMCVR2 Modular Metering Tenant Covers 200A Ring Style 1 Ringstyle meter cover welded with 10.00support brackets and paintedMMCVR2R Modular Metering Tenant Covers 200A Ringless 1 Ringless style meter cover welded with 10.00support brackets and paintedPAKMCVRR Tenant cover for Ring Style Uni-Pak Meter Center 1 Ringstyle meter cover welded with 10.00support brackets and paintedPAKMCVRL Tenant cover for RingLess Uni-Pak Meter Center 1 Ringless style meter cover welded with 10.00support brackets and paintedMeter Socket/Breaker MountingMMBMT1 Modular Metering Breaker Mounting S/A 125A Breaker Mounting assembly includes provision 14.00MMSCK1 Modular Metering Meter Socket Assembly 125A for 125 or 200A breaker 22.00MMBMT2 Modular Metering Breaker Mounting S/A 200A Meter Socket assembly includes jaws, straps, 24.00MMSCK2 Modular Metering Meter Socket Assembly 200A and hardware - see picture 3 above 22.00Loose Parts KitsMMPK11 Modular Metering Loose Parts Kit 125A 1 PHASE All loose screw bags, labels, instruction 16.00sheet and aluminum sealing ring (No SBJ)MMPK13 Modular Metering Loose Parts Kit 125A 3 PHASE All loose screw bags, labels, instruction 16.00sheet and aluminum sealing ring (No SBJ)MMPK21 Modular Metering Loose Parts Kit 200A 1 PHASE All loose screw bags, labels, instruction 16.00sheet and aluminum sealing ring (No SBJ)MMPK23 Modular Metering Loose Parts Kit 200A 3 PHASE All loose screw bags, labels, instruction 16.00sheet and aluminum sealing ring (No SBJ) Order CCK or CCK1 for Ring to Ringless CoverConversion Kit.2-82Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

Meter CentersModular Metering - Bus Duct ModulesBusway ApplicationSelectionSiemens offers a direct busway to modular meteringconnection. When six or less disconnects are present aconnection can be made directly to the meter module. Ifa main is needed Siemens offers breaker options up to1200amps and switch options up to 800amps.All breaker and switch modules are available with up to100,000 AIC ratings, are UL listed, and carry a Nema 1(indoor) rating. Common service entrance modules arelisted to the right. Lead time may apply. See below forspacing considerations.Common Bus Duct Units (1)Mechanism Catalog AIC ListAmperes (3) Phase Type Number Rating (2) Price $4001MC4BD4777.00JXD2 Breaker65,0003 MC44BD 7528.001MS4UBD2679.00Class T Fuse100,0003 MS44UBD 4716.006001MC6BD7250.00LXD6 Breaker65,0003 MC64BD 11326.001MS6UBD5231.00Class T Fuse100,0003 MS64UBD 8766.008001MC8BD11515.00JXD6 Breaker65,0003 MC84BD 14810.001MS8UBD8630.00Class T Fuse100,0003 MS84UBD 15262.00100012001MC10BD13348.00NXD6 Breaker65,0003 MC104BD 18484.001MC12BD19445.00NXD6 Breaker65,0003 MC124BD 27373.002 METERCENTERS1 - All devices are build to order.Tap stack & SBJ sold separately.2 - 100K AIC Breaker Units available - contact sales office for more information.3 - Alternate amperages for breaker modules available. Contact sales office for more info.Tap Stacks Tap stacks save space by connection Siemens’ Sentron Busway directly to speciallydesignedSiemens circuit breaker, switch, or tap box modules. Common modules arelisted above. Tap stacks require end-user to purchase an additional single bolt jointcoupler and are for indoor use on end-feed applications only.For inches / millimeters conversion, see Application Datasection. Tap stacks are produced with the busway.Contact sales office for more information.Discount Schedule RESI Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-83

2METERCENTERSEUSERC Commercial MeteringCommercial Type BY Meter-Main CombinationsDesign/Performance Features▪ Outdoor/Indoor—one design for eitherinstallation.▪ Ring Type—meets requirements for variousring type locking provisions.▪ Test Block Bypass Installed—easy servicingwithout interruption.▪ Main Breaker Field Installed—adaptable tothe job.▪ Main T-Fuse puller factory installed(less fuses)—adaptable to the job.Industry Specifications▪ ANSI – Standard #C 12.7▪ NEMA – Standard #250Standard #PB1▪ UL – Standard #414Standard #67▪ EUSERC – SEC #300SelectionSystems▪ 100/200 amperes maximum meter▪ 120/240V AC, 1ø3W, 4 jaw▪ 208Y/120V AC, 3W network, 5 jaw or3ø4W, 7 jaw▪ 240V AC, 1ø3W, 3ø3W, or 3ø4W, 4, 5or 7 jaw▪ 10,000 to 100,000 AICIn addition to local code and NationalElectrical Code requirements, the servingutility may have special requirements formetering devices. Confirm meter socketacceptance prior to order placement.Ring-type Meter-Main Combinations 100-200Amp Max.240V AC MaxAmpsCont. Max Tenant CB Catalog Service Dimensions (inches) KO Wire Range Hub ListDuty AIC Main Provision Service Jaws Number Feed Height Width Depth Fig. AL/CU Provision Price $10020065,000Circuit QP/ 1Phase- 4 MM0202L1100EY OH 36.00 12.50 4.88 1 #6-2/0 Box Lug 854.003 WireBreaker QPH/RX3 Phase-Provision HQP7 MM0303L3100EY OH 36.00 12.50 4.88 1 #6-2/0 Box Lug 1263.004 WireMM0202F1100EY OH 36.00 12.50 4.88 1 #6-2/0 Box Lug 1734.001 Phase-43 WireMM0202F1100CEY OH/UG 24.00 20.13 4.88 3 #6-2/0 Box Lug 1586.00100,000 T-Fuse None RXPuller MM0303F3100EY OH 36.00 12.50 4.88 1 #6-2/0 Box Lug 2322.003Phase-74 WireMM0303F3100CEY OH/UG 24.00 20.13 4.88 3 #6-2/0 Box Lug 2121.00MM0202L1200EY OH 45.00 14.25 6.38 2 #1/0-250 kcmil 1661.001 Phase-4QJ2/ 3 WireCircuitMM0202L1200CEY OH/UG 30.00 24.25 6.38 4 #1/0-250 kcmil 1776.00QJH2/35,000 BreakerHCProvision QJ2H/ MM0303L3200EY OH 45.00 14.25 6.38 2 #1/0-250 kcmil 2207.00HQJ2H 3 Phase-74 WireMM0303L3200CEY OH/UG 30.00 24.25 6.38 4 #1/0-250 kcmil 2356.00MM0202F1200EY OH 45.00 14.25 6.38 2 #1/0-250 kcmil 2322.001 Phase-43 WireMM0202F1200CEY OH/UG 30.00 24.25 6.38 4 #1/0-250 kcmil 2471.00100,000 T-Fuse None HCPuller MM0303F3200EY OH 45.00 14.25 6.38 2 #1/0-250 kcmil 3004.003 Phase-74 WireMM0303F3200CEY OH/UG 30.00 24.25 6.38 4 #1/0-250 kcmil 3250.00 Dimensions shown are representative of outside boxlength, width & depth (± 1 ⁄8”) and do not includeallowances for mounting bumps, endwalls, covers, hubsor hardware protrusions. Consult factory for specificdetails if required. Price does not include breaker or fuses. Price does not include fuses.2-84Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule RESI

EUSERC Commercial MeteringCommercial Type BY Meter-Load Center CombinationsSelectionMC1224B1100CEYMC2442F3200CEY2 METERCENTERSDesign/Performance Features▪ Outdoor/Indoor—one design for either installation.▪ Ring Type—meets requirements for various ring type lockingprovisions.▪ Test Block Bypass Installed—easy servicing withoutinterruption.▪ Main Breakers Factory Installed.▪ Main T-Fuse Pullers Factory Installed (less fuses).▪ Compact wall-hung design reduces material and labor costs.Systems▪ 100A, 200A maximum meter▪ 120/240V AC, 1ø3W, 4 jaws▪ 240V AC, 3ø4W, 7 jaws▪ 10,000 thru 100,000 AICAccessories — See below.In addition to local code and National Electrical Coderequirements, the serving utility may have specialrequirements for metering devices. Confirm meter socketacceptance prior to order placement.Ring Type Commercial Meter-Load Center Combinations with Test Block Bypass240 V AC Max.AIC RatingAmps MainWireCont. Breaker No. of Max. Catalog STD. MAXDimensions (inches) Hub Wire Range KO ListDuty Factory Inst. Spaces Circuits Service Number AIC AIC Height Width Depth Prov. AL/CU Fig. Price Notes1 Phase—3 Wire, 4 Jaws, Factory Installed Main Breaker100 Q2100 10 20 OH MC1020B1100EY 10,000 65,000 36.00 12.50 4.88 RX #6-2/0 Box Lug 7 1663.00 212 24 OH/UG MC1224B1100CEY 10,000 42,000 24.00 20.13 4.88 RX #6-2/0 Box Lug 8 1727.00 2200 QN2200RH 24 40 OH/UG MC2440B1200CEY 10,000 22,000 30.00 25.75 6.38 HC #1/0-250 kcmil 9 3116.00 23 Phase—4 Wire, 7 Jaws, Factory Installed T-Fuse Puller 100 T-Fuse Prov. 18 30 OH/UG MC1830F3100CEY 100,000 100,000 26.00 24.25 4.88 RX #6-2/0 Box Lug 10 3135.00 4200 T-Fuse Prov. 24 42 OHUG MC2442F3200CEY 100,000 100,000 42.00 27.25 6.38 HC #1/0-250 kcmil 11 3924.00 4Safety Socket AccessoriesCatalogListDescription Number Price $HubsConduit Size1" EC38596 37.811 1 ⁄4" EC38597 37.811 1 ⁄2" EC38598 23.962" EC38599 23.962" ECHC200 72.002 1 ⁄2" EC38600 107.572 1 ⁄2" ECHC250 108.003" ECHC300 175.00Closure EC38595 38.34Plates ECHC000 24.00Adapter PlatesBottom Only ECHCRXA 22.50CatalogListDescription Number Price $Fifth Jaw100A UX001WL 23.50200A UX005B 103.00 Dimensions shown are representative of outside boxlength, width & depth and do not include allowances formounting bumps, endwalls, covers, hubs or hardwareprotrusions. UL Listed to field change main breaker to higher AIC. Price does not include fuses.Discount Schedule RESI Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-85

EUSERC Commercial MeteringType BY Wiring DiagramsSelectionCommercial All-In-OnesMC1020B1100EYMC1224B1100CEYMC2440B1200CEYMETERCENTERS2MC1830F3100CEYMC2442F3200CEY2-86Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

EUSERC Commercial MeteringType BY Dimensions & Knockout DataSelectionFigure 1 Figure 2Figure 3Figure 42 METERCENTERSFigure 5 Figure 6Figure 7Figure 8Knockout Code—Conduit Sizes= 1 ⁄4 S = 1, 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2A = 1 ⁄2 T = 1 1 ⁄4B = 1 ⁄2, 3 ⁄4 U = 1 1 ⁄4, 1 1 ⁄2C = 1 ⁄2, 3 ⁄4, 1 V = 1 1 ⁄4, 1 1 ⁄2, 2D = 1 ⁄2, 1 W = 1 1 ⁄4, 2E = 1 ⁄2, 3 ⁄4, 1, 1 1 ⁄4 X = 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2F = 1 ⁄2, 1 1 ⁄4, 1 1 ⁄2 Y = 1 1 ⁄2, 2G = 3 ⁄4 Z = 1 1 ⁄2, 2, 2 1 ⁄2H = 3 ⁄4, 1 AA = 1 1 ⁄2, 2, 2 1 ⁄2, 3J = 3 ⁄4, 1, 1 1 ⁄4 BB = 1 1 ⁄2, 2, 2 1 ⁄2, 3, 3 1 ⁄2K = 3 ⁄4, 1 1 ⁄4 CC = 2, 2 1 ⁄2, 3, 3 1 ⁄2M = 3 ⁄4, 1, 1 1 ⁄4, 1 1 ⁄2 EE = 2, 2 1 ⁄2, 3N = 3 ⁄4, 1, 1 1 ⁄4, 1 1 ⁄2, 2 FF = 2 1 ⁄2, 3P = 1, 1 1 ⁄4 GG = 2 1 ⁄2, 3, 3 1 ⁄2Q = 1, 1 1 ⁄4, 1 1 ⁄2 HH = 2 1 ⁄2, 3, 3 1 ⁄2, 4R = 1, 1 1 ⁄4, 1 1 ⁄2, 2 JJ = 3 1 ⁄2, 4LL = 3VV = 2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 2-87

NotesMETERCENTERS22-88Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

3SPEEDFAX TM 2007-2008 Safety SwitchesContentsSafety Switch Guide Form Specifications 3-2Feature Comparison 3-3Enclosure Types 3-4Catalog Numbering System 3-5General Duty Safety SwitchesPlug Fuse Enclosed Type, 120/240V Fusible—Selection 3-660A Special Application Type, 240V Non-Fusible—Selection 3-6General Duty Switches—Features 3-7240V Fusible and Non-Fusible—Selection 3-8Heavy Duty Safety SwitchesHeavy Duty Switches—Features 3-9240V Fusible—Selection 3-10600V Fusible—Selection 3-11600V Non-Fusible—Selection 3-12Type 4/4X and 12 with Viewing Window—Selection 3-13Special Applications Safety Switches4-Pole and 6-Pole—Selection 3-14Interlocked Receptacle—Selection 3-15Non-Metallic—Selection 3-16Accessories—General and Heavy Duty SwitchesClass R Fuse Clips 3-17Class J Fusing 3-17Class T Fuse Adapter Kits 3-17Neutral Kits 3-17200% Neutral Kits 3-17Auxiliary Contacts 3-18Fuse Puller Kits 3-18Copper Lug Kits 3-19Equipment Ground Kits 3-19Isolated Ground Kits 3-19Interchangeable Hubs 3-20Compression Lug, Neutral Barrier Kits 3-20Lugs and Wire Ranges 3-20Multiple Padlocks 3-20Kirk-Key Interlocks 3-20Dimensions and WeightsGeneral and Heavy Duty Switches 3-21 – 3-24Type 1 and 3R Knockout Diagrams 3-25 – 3-26Non-Metallic and Receptacle Switch Dimensions 3-274-Pole and 6-Pole Switch Dimensions 3-28Double-Throw SwitchesSelection 3-29 – 3-30Dimensions 3-31Enclosed Rotary Disconnect Switches 3-32 – 3-33VBII Safety Switch Replacement Parts 3-343 SAFETYSWITCHESResidential Commercial Industrial

Feature ComparisonProduct OverviewGeneral Heavy Double Features /Duty Duty Throw Ratings▪ ▪ ▪ 30 thru 600 Amps▪ ▪ 800 and 1200 Amps▪ ▪ ▪ 240 Volt AC▪ ▪ 600 Volt AC▪ ▪ ▪ 250 Volt DC▪600 Volt DC▪ ▪ ▪ Double-break visible blade design(30-200A)▪ ▪ ▪ Quick-make, quick-break switching action▪ ▪ ▪ Highly visible ON/OFF handle indication▪Handle design for hook stick operation▪ ▪ ▪ Padlockable cover latch▪ ▪ ▪ Padlockable handle▪ ▪ Single voidable cover interlock▪ ▪ Dual voidable cover interlock▪ ▪ ▪ Type 1 enclosure▪ ▪ ▪ Type 3R enclosure▪ ▪ Type 12 enclosure▪ ▪ Type 4 / 4X enclosures▪ ▪ ▪ Generous wiring gutters that meet UL andNEC wire-bending space requirements▪ ▪ ▪ Lugs suitable for copper or aluminum at60˚ or 75˚C▪ ▪ ▪ CU/AL wire lugs that meet UL 486Brequirements▪ ▪ Suitable for field-convertiblecompression connectors▪ ▪ ▪ All plated copper current carrying parts(except lugs)▪ ▪ ▪ Spring reinforced Fuse Clips(except 30A general duty) ▪ ▪ Clear pivoting line terminal shield▪ ▪ ▪ Replacement parts▪Field addable 200% neutral▪ ▪ ▪ Provisions for UL Class T, R and H Fuses▪ ▪ Provisions for UL Class J and L Fuses▪ ▪ Metal nameplate▪ ▪ Aux. switch kits▪ Type 4X with stainless steel interior parts▪ ▪ Rolled flange enclosure design (30-200A)▪UL approved HP ratings forhigh efficiency motors▪ ▪ Isolated ground kitsonin operationoffDouble Break Switching ActionLike the time-proven Vacu-Break Design,the Siemens VBII double break switchingaction breaks the arc in two places in30-200A ratings. This reduces heatgeneration and increases switchingspeed by doubling the breaking distance.The result is enhanced performance andincreased longevity. We also provide themost visible blade design available today.Unlike conventional knife blade switches,the blades are self-aligning to ensurepositive contact. In addition, they haveno wear and friction point since the“electrical hinge” has been eliminated.The result is a very fast, positive andreliable switching action for even themost severe applications.3 SAFETYSWITCHES 400 & 600A fusible, double-throw switches accept onlyClass J or T fuses. 30A general duty switches have fuse clips constructedof spring type copper. Not supplied on 30A outdoor & plug fuse switches. 30-200A Type VBII in stainless steel enclosures. 60-200A. 200A general duty switches have aluminum neutralassemblies. 100-600A GD & DT and 100-1200A HD switches willaccept Class T fuses.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog3-3

Safety SwitchesGeneral Duty and Heavy DutyProduct Overview3SAFETYSWITCHESEnclosure Types□AType 1 enclosures are intended for indoor use primarily toprovide protection against contact with the enclosed equipmentin locations where unusual service conditions do not exist.□BType 3R enclosures are intended for outdoor use primarilyto provide a degree of protection against falling rain and sleetand must remain undamaged by the formation of ice on theenclosure. They are not intended to provide protection againstconditions such as dust, internal condensation, or internal icing.□CType 4, 4X enclosures are intended for indoor or outdooruse primarily to provide a degree of protection againstwindblown dust, rain, splashing water and hose-directed water.They are not intended to provide protection against conditionssuch as internal condensation or internal icing. Also meets4X definition by providing a high degree of protectionagainst corrosion. Siemens 30-200A stainless steel 4X switchesare supplied stainless interior parts and hardware as standard.□DType 4 enclosures are intended for indoor or outdoor useprimarily to provide a degree of protection against windblowndust, rain, splashing water and hose-directed water. They arenot intended to provide protection against conditions such asinternal condensation or internal icing.□EType 12 enclosures are intended for indoor use primarily toprovide a degree of protection against dust, falling dirt anddripping water. They are not intended to provide protectionagainst conditions such as internal condensation.Type 7/9 enclosures for use in hazardous locations. Use withmolded case switches listed on page 6-62. For enclosurecatalog numbers and dimensions see page 5-2 & 5-12.Note: Type 1 60A General Duty and Type 1 30 & 60A HeavyDuty Switches have tangential knockouts which are UL approvedfor bonding conduits for non-service entrance conductors.□A□C□D□B□ELoad Break RatingsAll Siemens safety switches are load break rated. The loadbreak rating is assigned by UL after the switching unit has successfullyperformed the following tests for general useenclosed switches:Load Break RatingsNumber ofSwitch ON/OFF Number of OperationsAmpere Operations With WithoutRating per Minute Current Current Total30–100 6 6000 4000 10000200 5 6000 2000 8000400 4 1000 5000 6000600 3 1000 4000 5000800 2 500 3000 35001200 1 500 2000 2500Horsepower RatingsAll Siemens safety switches, where appropriate, are horsepowerrated. The assignment of such ratings is made by ULonly after the switching unit has undergone tests to determineits acceptability. In addition, the unit must successfully performon an overload test series which includes repeated interruptionof the locked rotor current of the motor for which it is to berated as follows:Horsepower RatingsMax HP Number of ON/OFF Number of CyclesRating Operations per minute of Operation100 6 50500 1 10 VBII Type 12 switches are also rated 3R & 3S for outdooruse. Type 3R is defined in B above. 3S rated enclosuresprovide a degree of protection against windblown dustand allow operation when the enclosure is ice laden.3-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Catalog Numbering SystemType VBII Safety Switch Catalog Numbering SystemH F 3 6 4 N R CUProduct OverviewSwitch TypeL = General Duty10k AIC Max.(Plug Fused &60A MaxNon-Fused)G = Gen. DutyH = Heavy DutyDT = Double ThrowDTG = General Duty DTSpecial Applications With:CH = Crouse-Hinds ReceptacleCJ = Factory J Fuse SpacingsCR = Class R Clips InstalledCU = Factory-Installed Copper LugsG = Factory-Installed Ground BarH = Height or Size ReducedL = Oversized EnclosurePN = Pyle-National ReceptacleW = Viewing WindowFused or Non-FusedF = FusedNF = Non-FusedNumber of Poles1 = 12 = 23 = 34 = 46 = 6Enclosure TypeOmit = Type 1, IndoorR = Type 3R, OutdoorS = Type 4 / 4X, Stainless SteelX = Type 4 / 4X, Non-MetallicJ = Type 12, IndustrialXL = Type 4/4X Non-MetallicLess Line & Load LugsWith or Without NeutralOmit = Less NeutralN = With Neutral3 SAFETYSWITCHESVoltage1 = 120V or 120/240V2 = 240V6 = 600VAmperes1 = 30A2 = 60A3 = 100A4 = 200A5 = 400A6 = 600A7 = 800A8 = 1200AType VBII Accessories Catalog Numbering SystemH R 6 4Switch TypeH = Heavy DutyG = General DutyAccessory TypeA1 = Auxiliary Switch 1/NO and 1/NCA2 = Auxiliary Switch 2/NO and 2/NCA3 = Auxiliary Switch Low CurrentCL = Compression Lug Barrier /Mounting KitG = Ground Lug KitG2 = Insulated Ground Lug KitLC = Copper Lug KitN = NeutralN2 = 200% NeutralP = Fuse Puller KitR = Class R - Fuse Clip KitT = Class T - Fuse KitAmperes1 = 30A2 = 60A12 = 30/60A3 = 100A23 = 60/100A123 = 30/60/100A1234 = 30/60/100/200A4 = 200A56 = 400/600A5678 = 400/600/800/1200A78 = 800/1200AMaximum Voltage2 = 240V Max6 = 600V MaxNote: Catalog numbering systems above do not apply to4-pole double throw switches & accessories.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog3-5

3SAFETYSWITCHESGeneral Duty Enclosed SwitchesPlug Fuse and 60A Special Application TypeFeatures ▪ Compact size▪ Horsepower rated▪ Indoor and outdoor enclosures▪ Quick make-quick break mechanism▪ Visible “ON”-“OFF” indications▪ Padlock-off handle feature▪ Door padlock provision▪ Bondable neutral (where indicated)▪ Lugs suitable for copper or aluminum wire▪ UL Listed▪ Fuses — not included▪ Switches accept Edison base plugfuses▪ Hubs — see page 3-20▪ Lugs — see page 3-20SelectionDimensions (inches)Type Height Width Depth1 8 1 ⁄4 5 1 ⁄2 33R 8 1 ⁄4 5 3 ⁄8 3 1 ⁄8Wire Range TableSwitch TypeWire Range120/240 Volt Fusible Cu/Al30 Amp #14 to #8 AWG 120/240 Volt Non-Fusible Cu/Al60 Amp #14 to #3 AWGIndoor — Type 1 Outdoor — Type 3R Horsepower Ratings Ampere Catalog List Ship. Wt. Catalog List Ship Wt.1-Phase, 2-WireRating Number Price $ Pkg. of 10 Number Price $ Pkg. of 10 Standard Maximum120/240 Volt Fusible1-Pole and Solid Neutral 120 Volt — 1-Phase, 2-Wire30 LF111N 80.00 35 LF111NR 166.00 35 1⁄2 22-Pole and No Neutral30 Use 2-Pole and Solid Neutral2-Pole and Solid Neutral 120/240 Volt — 1-Phase, 2-Wire120/240 Volt — 1-Phase, 3-Wire30 LF211N 98.00 35 LF211NR 203.00 35 1 1 ⁄2 3240 Volt Non-Fusible2-Pole Special Application Switch 1 or 2-Pole — No Fuse 240 Volt — 1-Phase, 2-Wire60 — — — LNF222R 176.00 35 — 10For inches / millimeters conversion, multiply inches by25.4.Dual horsepower ratings:Std. — applies when non-time delay plug fusesare installed.Max — applies when time-delay plug fuses are installed.Has service entrance label.UL Listed as “Enclosed Switches” (suitable for use asservice equipment where indicated) under File #E4776.(NEMA) — Type G.D.Federal Spec. — W-S-865C — type LD or type NDSBottom cable entry and exit only. No hub provision supplied.GSGK60 is included and factory installed.Line lugs will accept and are UL approved for #14 to #6Cu/Al cable. Features also apply to 2- and 3-pole, 30A general dutyswitches on page 3-8.3-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule GDSS

General Duty Safety SwitchesFeatures (60-600A)Product Overview911 5103 SAFETYSWITCHES3618472121. Cover interlock2. Tangential knockouts through600A for easy conduit lineup3. Quick-make, quick-breakoperating mechanism that ensurespositive operation4. Provisions for T, R, J, H, andK class fuses (T & J 100-600A)5. Generous wiring gutters thatmeet or exceed NECwire-bending space requirements6. Visible blade, double-breakswitch action7. Positive 2 or 3 point mounting8. Highly visible red handle grip9. Informative door labeling whichincludes replacement parts list10. Handle and coverpadlocking provisions11. Side-hinged door that opens180 degrees for easier wiring12. A unique enclosure design thatadds rigidity and strength. Itsrolled edge prevents cuts andscrapes to conductors and toinstaller’s handsSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog3-7

General Duty Safety SwitchesSelectionSAFETYSWITCHES3Indoor — Type 1 Outdoor — Type 3RHorsepower Ratings 240V AC2501-Phase, 2-Phase, 3-Phase, VoltAmpere Catalog List Ship Wt.* Catalog List Ship Wt.*2-Wire 4-Wire 3-Wire DCSystem Rating Number Price $ Std. Pkg. Number Price $ Std. Pkg. Std. Max. Std. Max. Std. Max. Std.240 Volt Fusible2-Pole, 2-Fuse, and Solid Neutral 030 GF221N 127.00 035 GF221NR 203.00 035 01 1 ⁄2 03 — — 03 007 1 ⁄2 05060 GF222N 217.00 014 GF222NR 334.00 014 03 10 — — 07 1 ⁄2 015 10100 GF223N 437.00 023 GF223NR 492.00 024 07 1 ⁄2 15 — — 15 030 20200 GF224N 907.00 047 GF224NR 1287.00 048 15 — — — 25 060 40400 GF225NH 2753.00 128 GF225NRH 3730.00 130 15 — — — 50 125 50400 GF225N 2774.00 153 GF225NR 3752.00 157 15 — — — 50 125 50600 GF226NH 5438.00 133 GF226NRH 6897.00 135 15 — — — 75 200 —600 GF226N 5467.00 159 GF226NR 6929.00 159 15 — — — 75 200 —3-Pole, 3-Fuse, and Solid Neutral 240 Volt AC/250 Volt DC240 Volt AC/250 Volt DC030 GF321N 203.00 024 GF321NR 302.00 024 01 1 ⁄2 03 — — 03 007 1 ⁄2 05060 GF322N 334.00 015 GF322NR 454.00 015 03 10 — — 07 1 ⁄2 015 10100 GF323N 581.00 025 GF323NR 840.00 025 07 1 ⁄2 15 — — 15 030 20200 GF324N 1287.00 049 GF324NR 1524.00 050 15 — — — 25 060 40400 GF325NH 3262.00 136 GF325NRH 3934.00 138 15 — — — 50 125 50400 GF325N 3287.00 158 GF325NR 3955.00 162 15 — — — 50 125 50600 GF326NH 6091.00 138 GF326NRH 8171.00 141 15 — — — 75 200 —600 GF326N 6124.00 161 GF326NR 8205.00 165 15 — — — 75 200 —240 Volt Non-Fusible 2-Pole or 3-Pole240 Volt AC/250 Volt DC030 GNF321 166.00 024 GNF321R 302.00 024 — 3 — — 007 1 ⁄2 — 05060 GNF322 209.00 012 GNF322R 466.00 013 — 10 — — 015 — 10100 GNF323 492.00 023 GNF323R 840.00 024 — 15 — — 030 — 20200 GNF324 887.00 046 GNF324R 1505.00 047 — 15 — — 060 — 40400 GNF325 2275.00 114 Use 600V Switch — HNF365R — 15 — — 125 — 50600 GNF326 4350.00 116 Use 600V Switch — HNF366R — 15 — — 200 — —* In pounds (lbs). Dual horsepower ratings: Std.- applies when non-timedelay fuses are installed. Max.- applies when timedelayfuses are installed. These switches are UL-listed for application ongrounded B-phase systems. Suitable for use on 3-phase motor loads. Service entrance labeled. Has provision for ECHA type hub.5 switches per standard package. 10 switches per standard package. Height reduced switch (45.25 rather than 56 inches inheight) for use with 500MCM or smaller conductors.3-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule GDSS

Heavy Duty Safety SwitchesFeatures1532209111617413 SAFETYSWITCHES185613198141271. Quick-make, quick-break operating mechanismthat ensures positive operation.2. Visible blade, double-break switching action.3. Arc chutes dissipate heat and prolong switch life.4. Highly visible red handle grip.Designed for hook stick operation.12. Unique enclosure design increases rigidity andprevents cuts and scrapes to conductors andinstaller’s hands.13. Spring reinforced fuse clips that assure reliablecontact for cool operation.14. Door latch securely holds door closed andallows cover padlocking.105. Defeatable dual cover interlock.6. Center punch provided for field drillingto allow ON padlocking.7. Handle can be padlocked in the OFF positionwith up to (3) padlocks with 5/16" hasps.8. Generous top, bottom and side gutters thatmeet or exceed NEC wire-bending spacerequirements.9. Informative door labeling which includesreplacement parts list.10. Tangential knockouts through 600A for easyconduit lineup.11. Side-hinged door that opens past 180 degreesfor easier wiring.15. Front removable mechanical lugs that aresuitable for CU/AI 60 or 75° C conductors.16. Lugs are field convertible to copperbody and to a wide variety of compressionconnectors.17. Hinged clear line terminal shieldwith probe holes for inspecting ortesting line side terminals.18. Embossed aluminum nameplate on HeavyDuty Switches provides highly visible ON/OFFindication.19. Drawn cover for increased rigidityand resistance to abuse.20. Top key hole and bottom mounting holesprovide easy 2 or 3 point mounting.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog3-9

Heavy Duty Safety SwitchesSelectionSAFETYSWITCHES3Indoor — Type 1 Outdoor — Type 3RHorsepower Ratings 240V AC1-Phase, 2-Phase, 3-Phase,250Ampere Catalog List Ship Wt.* Catalog List Ship Wt.* 2-Wire 4-Wire 3-Wire VoltDCSystem Rating Number Price $ Std. Pkg. Number Price $ Std. Pkg. Std. Max. Std. Max. Std. Max.240 Volt Fusible 2-Pole, 2-Fuse, and Solid Neutral (Also used for 2-Pole, 2-Wire Applications) 240 Volt AC/250 Volt DC0030 HF221N 257.00 012 HF221NR 487.00 013 01 1 ⁄2 03 — — 003 007 1 ⁄2 050060 HF222N 512.00 018 HF222NR 914.00 019 03 10 — — 007 1 ⁄2 015 100100 HF223N 781.00 023 HF223NR 1174.00 024 07 1 ⁄2 15 — — 015 030 200200 HF224N 1391.00 047 HF224NR 1700.00 048 15 — — — 025 060 400400 HF225NH 3390.00 129 HF225NRH 4536.00 131 15 — — — 050 125 500400 HF225N 3416.00 153 HF225NR 4559.00 157 15 — — — 050 125 500600 HF226NH 6237.00 133 HF226NRH 8317.00 135 15 — — — 075 200 500600 HF226N 6266.00 155 HF226NR 8351.00 159 15 — — — 075 200 50800 HF227N 11116.00 365 HF227NR 13270.00 365 — — — — 100 250 501200 HF228N■ 13688.00 385 HF228NR■ 18454.00 385 — — — — 100 250 503-Pole, 3-Fuse, and Solid Neutral (Also used for 3-Pole, 3-Wire Applications) 240 Volt AC/250 Volt DC0030 HF321N 323.00 014 HF321NR 620.00 015 01 1 ⁄2 03 — — 003 007 1 ⁄2 050060 HF322N 547.00 019 HF322NR 979.00 020 03 10 — — 007 1 ⁄2 015 100100 HF323N 906.00 025 HF323NR 1400.00 026 07 1 ⁄2 15 — — 015 030 200200 HF324N 1570.00 049 HF324NR 1906.00 050 15 — — — 025 060 400400 HF325NH 4161.00 137 HF325NRH 4643.00 138 15 — — — 050 125 500400 HF325N 4183.00 158 HF325NR 4183.00 162 15 — — — 050 125 500600 HF326NH 7073.00 139 HF326NRH 9354.00 142 15 — — — 075 200 500600 HF326N 7104.00 161 HF326NR 9389.00 165 15 — — — 075 200 500800 HF327N 13591.00 375 HF327NR 17377.00 375 — — — — 100 250 501200 HF328N 16946.00 395 HF328NR 21095.00 388 — — — — 100 250 50240 Volt Fusible 2-Pole, 2-Fuse Type 4/4X Stainless Type 12 Industrial 240 Volt AC/250 Volt DC3-Pole, 3-Fuse 0030 HF221S 2216.00 013 HF221J 729.00 013 01 1 ⁄2 03 — — 003 007 1 ⁄2 050060 HF222S 2507.00 019 HF222J 881.00 019 03 10 — — 007 1 ⁄2 015 100100 HF223S 4952.00 024 HF223J 1274.00 024 07 1 ⁄2 15 — — 015 030 200200 HF224S 7519.00 048 HF224J 2017.00 048 15 — — — 025 060 40(Also used for 2-Pole, 2-Wire Applications in 400–800A Ratings) 240 Volt AC/250 Volt DC0030 HF321S 2307.00 014 HF321J 767.00 014 01 1 ⁄2 3 — — 003 007 1 ⁄2 —0060 HF322S 2707.00 020 HF322J 939.00 020 3 10 — — 007 1 ⁄2 015 100100 HF323S 5759.00 025 HF323J 1414.00 025 07 1 ⁄2 15 — — 015 030 200200 HF324S 7965.00 049 HF324J 2185.00 049 15 — — — 025 060 40400 HF325S 16315.00 154 HF325J■ 4741.00 110 15 — — — 50 125 50600 HF326S 23672.00 157 HF326J■ 8957.00 161 15 — — — 75 200 50800 HF327S■ 31830.00 370 HF327J■ 16792.00 365 — — — — 100 250 50■ Built to order. Allow 2–3 weeks for delivery.* In pounds (lbs). Height reduced switch (45.25 rather than 56 inches inheight) for use with 500MCM or smaller conductors.3-10 Dual horsepower ratings: Std.- applies when non-timedelay fuses are installed. Max.- applies when timedelayfuses are installed. These switches are UL-listed for application ongrounded B-phase systems and are suitable for3-phase motor applications.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog When a neutral is required use a field installedneutral kit. Suitable for use as service entrance equipment. Also rated Type 3S/3R.Discount Schedule HDSS

Heavy Duty Safety SwitchesSelectionHorsepower Ratings Indoor — Type 1 Outdoor — Type 3R 480V AC 600V AC1-Phase, 3-Phase, 1-Phase, 3-Phase,250 600Ampere Catalog List Ship Wt.* Catalog List Ship Wt.* 2-Wire 3-Wire 2-Wire 3-Wire Volt VoltSystem Rating Number Price $ Std. Pkg. Number Price $ Std. Pkg. Std. Max. Std. Max. Std. Max. Std. Max. DC DC600 Volt Fusible 2-Pole, 2-Fuse 0030 HF261 553.00 015 HF261R 984.00 015 03 07 1 ⁄2 — — 03 10 — — 05 150060 HF262 656.00 020 HF262R 1154.00 020 05 20 — — 10 25 — — 10 300100 HF263 1227.00 026 HF263R 1788.00 027 10 30 — — 15 40 — — 20 500400 HF265■ 4663.00 149 HF265R■ 5702.00 152 — 50 — — 50 — — — 40 500600 HF266■ 7813.00 150 HF266R■ 11241.00 155 — 50 — — 50 — — — 50 500030 HF361S 2681.00 013 HF361J 1001.00 014 — — 005 015 — — 007 1 ⁄2 020 05 —0060 HF362S 2875.00 020 HF362J 1104.00 020 — — 015 030 — — 015 050 10 30 0100 HF363S 5627.00 025 HF363J 1791.00 025 — — 025 060 — — 030 075 20 50 0200 HF364S 7997.00 049 HF364J 2507.00 049 — — 050 125 — — 060 150 40 500400 HF365S 16468.00 158 HF365J 5631.00 160 — — 100 250 — — 125 350 50 —0600 HF366S 24310.00 161 HF366J 10233.00 161 — — 150 400 — — 200 500 50 —0800 HF367S 31062.00 370 HF367J■ 17430.00 365 — — 200 500 — — 250 500 50 —01200 HF368S■ 36846.00 388 HF368J■ 22352.00 388 — — 250 500 — — 250 500 50 —Discount Schedule HDSS480 Volt AC/600 Volt AC/600 Volt DC3-Pole, 3-Fuse480 Volt AC/600 Volt AC/250 Volt DC 0030 HF361 568.00 14 HF361R 984.00 015 333 07 1 ⁄2 005 015 03 10 007 1 ⁄2 020 05 —0030 HF361L 654.00 19 HF361RL 1128.00 020 3 07 1 ⁄2 005 015 03 10 007 1 ⁄2 020 05 —0060 HF362 676.00 19 HF362R 1154.00 020 5 20 015 030 10 25 015 050 10 30 0060 — — — HF362RL 1755.00 025 5 20 015 030 10 25 015 050 10 30 0100 HF363 1301.00 24 HF363R 1788.00 025 5 20 025 060 15 40 030 075 20 50 0200 HF364 1830.00 48 HF364R 2444.00 049 25 50 050 125 30 50 060 150 40 500400 HF365H 4875.00 136 HF365RH 5877.00 137 — — 100 250 — — 125 350 50 —0400 HF365 4898.00 154 HF365R 5903.00 157 — — 100 250 — — 125 350 50 —0600 HF366H 8475.00 138 HF366RH 11676.00 141 — — 150 400 — — 200 500 50 —0600 HF366 8503.00 157 HF366R 11702.00 161 — — 150 400 — — 200 500 50 —0800 HF367 14825.00 365 HF367R 17975.00 365 — — 200 500 — — 250 500 50 —1200 HF368 18724.00 383 HF368R 22116.00 385 — — 200 500 — — 250 500 50 —3-Pole, 3-Fuse and Solid Neutral480 Volt AC/600 Volt AC/250 Volt DC 0030 HF361N 666.00 014 HF361NR 1062.00 015 03 07 1 ⁄2 005 015 03 10 007 1 ⁄2 020 05 —0060 HF362N 777.00 019 HF362NR 1231.00 020 05 20 015 030 10 25 015 050 10 30 0100 HF363N 1426.00 025 HF363NR 1940.00 026 10 30 025 060 15 40 030 075 20 50 0200 HF364N 2022.00 049 HF364NR 2586.00 050 25 50 050 125 30 50 060 150 40 500400 HF365N 5300.00 158 HF365NR 6368.00 162 — — 100 250 — — 125 350 50 —0600 HF366N 8955.00 161 HF366NR 12111.00 165 — — 150 400 — — 200 500 50 —0800 HF367N 15665.00 375 HF367NR 18815.00 375 — — 250 500 — — 250 500 50 —1200 HF368N 19563.00 395 HF368NR 22955.00 388 — — 250 500 — — 250 500 50 —600 Volt Fusible (For 2-Pole Applications use outside poles of 3-Pole Switches)2-Pole, 2-Fuse 3-Pole, 3-Fuse480 Volt AC/600 Volt AC/600 Volt DCType 4/4X StainlessType 12 Industrial 0030 HF261S 2638.00 015 HF261J■ 984.00 015 03 07 1 ⁄2 — — 03 10 — — 05 150060 HF262S 2792.00 020 HF262J■ 991.00 020 05 20 — — 10 25 — — 10 300100 HF263S■ 5613.00 027 HF263J■ 1547.00 027 10 30 — — 15 40 — — 20 500400 HF265S■ 15870.00 153 HF265J■ 5357.00 155 — 50 — — 50 — — — 40 500600 HF266S■ 22680.00 156 HF266J■ 8768.00 156 — 50 — — 50 — — — 50 50■ Built to order. Allow 2–3 weeks for delivery.* In pounds (lbs). 60-200A 3-Pole switches are also rated 600V DC. Height reduced switch (45.25 rather than 56 inches inheight) for use with 500MCM or smaller conductors. Use 3-Pole switch for 200A applications. Dual horsepower ratings: Std.- applies when non-timedelay fuses are installed. Max.- applies when timedelayfuses are installed. Suitable for use as service entrance equipment except for1200 when used on 480 or 600V grounded wye system. Also rated Type 3S/3R.480 Volt AC/600 Volt AC/250 Volt DC Indicates oversized enclosure (30A switch with 60Alugs in a 60A enclosure or 60A switch with 100A lugsin a 100A enclosure). 600V DC & 600V DC horsepower rating shownrequires (2) poles to be connected in series.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog3-113 SAFETYSWITCHES

Heavy Duty Safety SwitchesSelectionSAFETYSWITCHES3Indoor - Type 1 Outdoor - Type 3R Horsepower Ratings240 Volt 480 Volt 600 Volt 250V 600VAmpere Catalog Ship. List Catalog Ship. ListSystem Rating Number Wgt. Price $ Number Wgt. Price $ 1-Phase 3-Phase 1-Phase 3-Phase 1-Phase 3-Phase DC DC600 Volt Non-Fusible 2-Pole 480 Volt AC / 600 Volt AC / 600 Volt DC30 HNF261 12 299.00 HNF261R 13 532.00 — — 7 1/2 — 10 — 5 1560 HNF262 19 532.00 HNF262R 20 930.00 — — 20 — 25 — 10 30100 HNF263 24 823.00 HNF263R 25 1323.00 — — 30 — 40 — 20 50400 HNF265■ 109 2893.00 HNF265R 113 4075.00 15 — 50 — 50 — 40 50600 HNF266■ 111 5102.00 HNF266R■ 115 8134.00 15 — 50 — 50 — 50 503-Pole480 Volt AC / 600 Volt AC / 250 Volt DC30 HNF361 12 299.00 HNF361R 13 532.00 5 10 7 1/2 20 10 30 5 —30 — — — HNF361RL 19 900.00 5 10 7 1/2 20 10 30 5 —60 HNF362H 11 523.00 HNF362RH 11 923.00 10 20 20 50 20 40 10 —60 HNF362 18 532.00 HNF362R 19 936.00 10 20 20 50 25 60 10 30 60 — — — HNF362RL 24 1301.00 10 20 20 50 25 60 10 30 100 HNF363 23 864.00 HNF363R 24 1338.00 15 40 30 75 40 100 20 50 200 HNF364 46 1314.00 HNF364R 47 1616.00 15 60 50 125 50 150 40 50400 HNF365 114 3068.00 HNF365R 118 4107.00 15 125 50 250 50 350 50 —600 HNF366 116 5467.00 HNF366R 120 8147.00 15 200 50 400 50 500 50 —800 HNF367 295 10779.00 HNF367R 295 14209.00 15 250 50 500 50 500 50 —1200 HNF368 305 14642.00 HNF368R 307 18567.00 15 250 50 500 50 500 50 —600 Volt Non-Fusible 2-Pole 480 Volt AC / 600 Volt AC / 600 Volt DCType 4 / 4X Stainless Type 12 Industrial 30 HNF261S 13 2153.00 HNF261J 13 641.00 — — 7 1/2 — 10 — 5 1560 HNF262S 20 2521.00 HNF262J 20 806.00 — — 20 — 25 — 10 30100 HNF263S■ 25 5137.00 HNF263J■ 25 1153.00 — — 30 — 40 — 20 50400 HNF265S■ 113 13612.00 HNF265J■ 114 3902.00 15 — 50 — — — 40 50600 HNF266S■ 115 19606.00 HNF266J■ 120 6557.00 15 — 50 — — — 50 503-Pole480 Volt AC / 600 Volt AC / 250 Volt DC30 HNF361S 13 2186.00 HNF361J 13 670.00 5 10 7 1/2 20 10 30 5 —60 HNF362SH 15 2537.00 HNF362JH 14 930.00 10 20 20 50 20 40 10 —60 HNF362S 19 2563.00 HNF362J 19 946.00 10 20 20 50 25 60 10 30 100 HNF363S 24 5198.00 HNF363J 24 1338.00 15 40 30 75 40 100 20 50 200 HNF364S 47 7078.00 HNF364J 47 1692.00 15 60 50 125 50 150 40 50400 HNF365S 118 14729.00 HNF365J 119 4152.00 15 125 50 250 50 350 50 50600 HNF366S 120 21589.00 HNF366J 120 8150.00 15 200 50 400 50 500 50 50800 HNF367S 295 30951.00 HNF367J■ 295 14224.00 15 250 50 500 50 500 50 501200 HNF368S■ 310 34305.00 HNF368J■ 310 18684.00 15 250 50 500 50 500 50 50■ Built to order. Allow 2–3 weeks for delivery. Also rated 600V DC. Compact switch (11.1"H, 6.6"W box less cover and handle).Short circuit withstand rating—100,000 RMS sym. amps. Use 3-Pole switch for 200A application. Suitable for use as service entrance equipment except for1200 when used on a 480 or 600V grounded wye system. Also rated type 3S / 3R. Indicates oversized enclosure (30A switch in a 60Aenclosure or a 60A switch in a 100A enclosure. 600V DC and 600V DC horsepower rating shownrequires (2) poles to be connected in series.3-12Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule HDSS

Heavy Duty Safety SwitchesType 4/4X & 12 with Viewing WindowDescriptionFeatures30–600A, 3-pole 600V max. in fusible andnon-fusible versions in Type 4/4X stainlesssteel and Type 12 enclosures.All allow viewing of visible blade position.30–200A also allow viewing of indicatingtype fuses.▪ Rugged installer-friendly enclosuredesign features a gasket flange withcontinuously welded seams▪ Tool-free cover latches▪ Two, three and four point mounting▪ Metal handle with large insulating gripfeatures a positive stop in both ON andOFF position▪ Ground lugs provided as standard▪ Type 12 enclosures are fabricated fromgalvanized steel and are also rated for3R/3S outdoor applications▪ Type 4X stainless steel switches(30–200A) are provided with stainlesssteel interior parts▪ The widest range of accessoriesavailable including 200% neutrals,gold plated PLC auxiliary contactsand isolated ground kitsSelection3 SAFETYSWITCHESMaximum Horsepower Ratings Ampere Catalog List Ship. 240V AC 480V AC 600V AC 250V 600VSystem Rating Number Price $ Weight 1-Phase, 2-Wire 3-Phase, 3-Wire 3-Phase, 3-Wire 3-Phase, 3-Wire DC DC3-Pole, 3-Wire Fusible, Type 12 600 Volt AC / 250 Volt DC 30 HF361JW 1146.00 17 3 7 1/2 15 20 5 —60 HF362JW 1169.00 22 10 15 30 50 10 30 100 HF363JW 1945.00 26 15 30 60 75 20 50 200 HF364JW 2661.00 53 — 60 125 150 40 50400 HF365JW 5867.00 166 — 125 250 350 50 —600 HF366JW 13063.00 168 — 200 400 500 50 —3-Pole, 3-Wire Non-Fusible, Type 12 30 HNF361JW 816.00 14 3 10 20 30 5 —60 HNF362JW 1093.00 21 10 20 50 60 10 30 100 HNF363JW 1489.00 25 15 40 75 100 20 50 200 HNF364JW 1842.00 51 15 60 125 150 40 50400 HNF365JW 4299.00 133 15 125 250 350 50 —3-Pole, 3-Wire Fusible, Type 4X Stainless Steel 600 Volt AC / 250 Volt DC 600 Volt AC / 250 Volt DC 30 HF361SW 2828.00 17 3 7 1/2 15 20 5 —60 HF362SW 3030.00 23 10 15 30 50 10 30 100 HF363SW 5782.00 28 15 30 60 75 20 50 200 HF364SW 8171.00 55 — 60 125 150 40 50400 HF365SW 20138.00 168 15 125 250 350 50 —3-Pole, 3-Wire Non-Fusible, Type 4X Stainless Steel 600 Volt AC / 250 Volt DC 30 HNF361SW 2333.00 15 3 10 20 30 5 —60 HNF362SW 2720.00 23 10 20 50 60 10 30 100 HNF363SW 5349.00 27 15 40 75 100 20 50 200 HNF364SW 7228.00 54 15 60 125 150 40 50400 HNF365SW 15917.00 134 15 125 250 350 50 — In pounds (lbs). 200A switches are also rated 600V DC. Maximum HP ratings listed apply only when time delayfuses are used. Also rated 3S/3R for outdoor use. All switches are suitable for use as service entranceequipment. Use outside poles of 3-pole switch for 2-poleapplication. 600V DC and 600V DC horsepower rating shownrequires (2) poles to be connected in series.Discount Schedule HDSSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog3-13

3SAFETYSWITCHESHeavy Duty Safety SwitchesType VBII 4 & 6-Pole Heavy Duty Safety SwitchesApplication4 & 6-pole Switches are commonlyused as a disconnecting means fortwo-speed, two-winding motors.Fused switches provide both overcurrent and short circuit protection.Non-fusible switches normally providea local disconnection means for twospeedmotors which are remote fromtheir motor controller. 4-pole switchesare also used in 3-phase, 4-wire circuitswhen a switching neutral is required.All 4 & 6-pole switches are serviceentrance rated.Description4 & 6-pole switches are available in30-200A ratings and in both fusible andnon-fusible versions. 4-pole switches aresupplied with either Type 1 or Type12/3Renclosures.6-pole switches are available with eitherType 12/3R or Type 4X stainless steelenclosures.Standards▪ UL & CUL listed under file #E4776▪ Meets UL98 for enclosed switches▪ 4 & 6-Pole switches are suitable foruse as service entrance▪ Meets NEMA Standard KS-1 forenclosed switches▪ Meets NEC wire bending spacerequirementsFeatures▪ Visible blade, double break switchingaction▪ Highly visible ON/OFF indication▪ Defeatable dual cover interlock▪ Padlock option in OFF position▪ All copper current carrying parts ▪ Tangenital knockouts (Type 1,4-pole switches)HNF663SSelection4-Pole Type VBII Switches Indoor Type 1 Type 12/3R Industrial Horsepower Ratings Amp Catalog List Ship Wt. Catalog List Ship Wt. 240V, 2Ø, 4W 240V 3Ø 480V, 3Ø 600V, 3Ø 250VSystem Rating Number Price $ (lbs.) Number Price $ (lbs.) Std. Max. Std. Max. Std. Max. Std. Max. DCFusible 600 Volt AC, 250 Volt DC — 4-Pole, 4 Fuse 30 HF461 926.00 36 HF461J 1198.00 36 3 10 3 7 1 ⁄2 5 15 7 1 ⁄2 20 560 HF462 1082.00 40 HF462J 1321.00 40 7 1 ⁄2 20 7 1 ⁄2 15 15 30 15 50 10100 HF463 1786.00 43 HF463J 2045.00 43 15 30 15 30 25 60 30 75 20200 HF464■ 2939.00 88 HF464J■ 3419.00 88 25 50 25 60 50 125 60 150 40Non-fusible 600 Volt AC, 250 Volt DC — 4-Pole30 HNF461 881.00 32 HNF461J 964.00 32 — 10 — 10 — 20 — 30 560 HNF462 926.00 34 HNF462J 1128.00 34 — 20 — 20 — 50 — 60 10100 HNF463■ 1716.00 36 HNF463J■ 1962.00 36 — 30 — 40 — 75 — 100 20200 HNF464■ 2492.00 78 HNF464J■ 2964.00 78 — 50 — 60 — 125 — 150 406-Pole Type VBII Switches Type 12/3R Industrial Type 4X Stainless Steel Horsepower Ratings Amp Catalog List Ship Wt. Catalog List Ship Wt. 240V 3Ø 480V, 3Ø 600V, 3Ø 250VSystem Rating Number Price $ (lbs.) Number Price $ (lbs.) Std. Max. Std. Max. Std. Max. DCFusible 600 Volt AC, 250 Volt DC — 6-Pole, 6 Fuse 30 HF661J 3594.00 37 HF661S■ 12437.00 37 3 7 1 ⁄2 5 15 7 1 ⁄2 20 560 HF662J 4324.00 41 HF662S■ 13063.00 41 7 1 ⁄2 15 15 30 15 50 10100 HF663J■ 5194.00 44 HF663S■ 22191.00 44 15 30 25 60 30 75 20200 HF664J■ 9599.00 90 HF664S■ 30293.00 90 25 60 50 125 60 150 40Non-fusible 600 Volt AC, 250 Volt DC — 6-Pole30 HNF661J 3156.00 33 HNF661S 7422.00 33 — 10 — 20 — 30 560 HNF662J 3723.00 35 HNF662S 8264.00 35 — 20 — 50 — 60 10100 HNF663J 4479.00 37 HNF663S 10120.00 37 — 40 — 75 — 100 20200 HNF664J 8155.00 80 HNF664S■ 18770.00 80 — 60 — 125 — 150 40■ Built to order. Allow 2–3 weeks for delivery. Lugs are aluminum alloy as standard. Optional copperbody lugs are available. All 4 & 6-pole VBII switches are suitable for use asservice equipment when a neutral is installed orequipment ground kit is properly connected. Dual horsepower ratings: Std. – applies whennon-time-delay fuses are installed. Max. – applieswhen time delay fuses are installed. Fusible switches accept Class H Fuses as the standard.Class R & J fuses can also be installed andincrease the rating from 10,000 to 200,000 AIC. ForClass J, the load base is moved upward. For Class Rfuses, rejection kits are required. Supplied with factory installed ground lugs.3-14Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule HDSS

Heavy Duty Safety SwitchesSpecial Application Switches / Interlocked Receptacle SwitchesApplicationReceptacle Safety Switchesprovide cord connection protectionof heavy-duty portable equipment(welders, infrared ovens, batchfeeders, portable conveyors, assemblyline fixtures and tools, refrigeratortrucks, etc.) under load or faultconditions.Description Type 12 and 4/4X ReceptacleSafety Switches are availablewith 3-phase, 4-wire grounded typeCrouse-Hinds Arktite 2 receptacle,or Pyle-National pre-wired and mountedwith interlock linkage to the switchmechanism. Insertion or removal ofthe plug is prevented by the interlocklinkage while the switch is in the “ON”position. Receptacle prevents operationof switch if incorrect plug is inserted.Type 4/4X Switches are provided withstainless steel interior parts.All receptacle switches are 3-pole,3-wire plus ground.Selection3 SAFETYSWITCHESCrouse-Hinds Interlocked Receptacle SwitchesType 12 Type 4/4X Shipping Accepts Crouse-HindsAmpere Catalog List Catalog List Weight Arktite PlugRating Number Price $ Number Price $ Std. Pkg. Catalog Number240V Fusible, 3-Pole, 3-Wire30 HF321JCH 2365.00 HF321SCH▲ 7116.00 23 APJ3485 & NPJ348560 HF322JCH 2440.00 HF322SCH▲ 7437.00 30 APJ6485 & NPJ6485100 HF323JCH 3161.00 HF323SCH▲ 12067.00 36 APJ10487 & NPJ10487600V Fusible, 3-Pole, 3-Wire30 HF361JCH 2449.00 HF361SCH 7437.00 24 APJ3485 & NPJ348560 HF362JCH 2588.00 HF362SCH 7655.00 30 APJ6485 & NPJ6485100 HF363JCH 3392.00 HF363SCH▲ 12803.00 36 APJ10487 & NPJ10487600V Non-Fusible, 3-Pole, 3-Wire30 HNF361JCH▲ 2153.00 HNF361SCH▲ 6857.00 22 APJ3485 & NPJ348560 HNF362JCH 2440.00 HNF362SCH 6922.00 29 APJ6485 & NPJ6485100 HNF363JCH▲ 2997.00 HNF363SCH▲ 11787.00 35 APJ10487 & NPJ10487600V Fusible, 3-Pole, 3-Wire with Viewing Window30 HF361JCHW▲ 2597.00 HF361SCHW▲ 7593.00 24 APJ3485 & NPJ348560 HF362JCHW 2743.00 HF362SCHW 7810.00 30 APJ6485 & NPJ6485100 HF363JCHW▲ 3547.00 HF363SCHW▲ 12959.00 36 APJ10487 & NPJ10487600V Non-Fusible, 3-Pole, 3-Wire with Viewing Window30 HNF361JCHW▲ 2301.00 HNF361SCHW▲ 7005.00 22 APJ3485 & NPJ348560 HNF362JCHW 2592.00 HNF362SCHW▲ 7074.00 29 APJ6485 & NPJ6485100 HNF363JCHW▲ 3151.00 HNF363SCHW▲ 11944.00 35 APJ10487 & NPJ10487Pyle-National Interlocked Receptacle Switches3-Pole, 3-Wire Plus Ground Fusible and Non-FusibleType 12Type 12 Stainless Steel Shipping Accepts Pyle-NationalAmpere Rating Voltage Catalog List Catalog List Weight QuelArc PlugsSwitch Receptacle Rating Number Price $ Number Price $ Std. Pkg. Plug Catalog Number30 30 600 (F) HF361JPN▲ 2449.00 HF361SPN▲ 7437.00 23 JPD-83046600 (N-F) HNF361JPN 2153.00 HNF361SPN 6857.00 21240 (F) HF322JPN▲ 2440.00 — — 2860 60 600 (F) HF362JPN▲ 2588.00 HF362SPN▲ 7655.00 28 JPD-116046600 (N-F) HNF362JPN 2440.00 HNF362SPN 6922.00 27▲ Built to order. Allow 6–8 weeks for delivery. Arktite is a registered trademark of the Crouse-Hinds Company. Plugs are not sold or supplied bySiemens. Indicates plug with maximum diameter cable bushing. QuelArc is a registered trademark of the Pyle-National Company. In pounds (lbs.). Ampere rating of both switch and receptacle. Also rated Type 3R/3S. Enclosure is constructed of Type 304 stainless steel.Discount Schedule HDSSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog3-15

3SAFETYSWITCHESHeavy DutySpecial Application Safety Switches / Type VBII Non-MetallicApplicationSiemens Non-Metallic Safety Switcheshave fiberglass reinforced polyesterenclosures which are extremelyresistant to a wide range of corrosiveatmospheres which can beencountered in waste watertreatment plants and certainindustrial applications.Description30-200A, 600V Max, fusible and nonfusibleswitches are available in Type4X enclosures. The fiberglassreinforced enclosure allows a widerange of operating temperatures andis supplied with a continuous memoryretaining gasket for a superior sealagainst entry of water, dust and othercontaminants. The excellent insulatingproperties of fiberglass virtuallyeliminate problems caused byinternal condensation.All switches are load break rated andare provided with an equipment groundkit as standard. Class R fuse clip kitsand auxiliary switch kits are alsoavailable.SelectionShipHorsepower Rating—3-PhaseWeight240 Volt AC 480 Volt AC 600 Volt AC250 600Ampere Catalog Std.pkg. List Volts VoltsSystem Rating Number (lbs.) Price $ Std. Max. Std. Max. Std. Max. DC DC3-Pole, 4-Wire, 240 Volt Fusible, Type 4X030 HF321NX 21 3320.00 3 07 1 ⁄2 — 0— — 0— 05 —060 HF322NX▲ 22 3595.00 7 1 ⁄2 15 — 0— — 0— 10 —3-Pole, 4-Wire, 600 Volt AC Fusible, Type 4X 030 HF361NX 21 3693.00 03 07 1 ⁄2 05 015 07 1 ⁄2 020 05 15 060 HF362NX 22 4046.00 07 1 ⁄2 15 15 030 15 050 10 30 100 HF363NX▲ 39 7795.00 15 30 25 060 30 075 20 50 200 HF364NX▲ 83 9917.00 25 60 50 125 60 150 40 503-Pole, 3-Wire, 600 AC Volt Non-Fusible, Type 4X 030 HNF361X 20 3127.00 — 07 1 ⁄2 — 020 — 030 05 15 060 HNF362X 20 3509.00 — 15 — 050 — 060 10 30 10100 HNF363X▲ 38 6734.00 — 30 — 075 — 100 20 50 200 HNF364X▲ 81 9509.00 — 60 — 125 — 150 40 50▲ Built to order. Allow 6–8 weeks for delivery. Also used for 240 volt applications. Add “L” to end of catalog number for switches lessline & load lugs with mounting hardware for crimptype or copper body lugs. 200A switches are also rated 600V DC max. 600V DC and 600V DC horsepower rating shownrequires (2) poles to be connected in series.Non-Metallic Features▪ 30, 60, 100 and 200Ampere Switches▪ 600 Volts Fusible▪ 600 Volts Non-Fusible▪ Rated 10,000 AIC withClass H Fuses▪ Rated 200,000 AIC withClass J or R Fuses▪ UL-Listed under File E4776▪ Horsepower Rated▪ Suitable for use asService Equipment▪ Quick-make, quick-breakmechanism▪ Visible Blade Construction▪ Padlock-off handle feature▪ Field Installable Auxiliary Contacts▪ Field Replaceable Line andLoad Bases▪ Factory Installed Ground LugSupplied as Standard▪ Line Terminal Shields▪ Neutrals Installed as Standardon Fusible Switches3-16Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule HDSS

General and Heavy Duty Safety SwitchesAccessoriesSelectionHR612HT63HN612Class R Fuse Clip KitsAll General Duty and Heavy Duty Switchesare field convertible to accept Class RFuse Clip Kits. The kits prevent theinstallation of Class H and K fuses(one kit required per 3-pole switch).Class R Fuse Clip KitsCatalog ListNumber Price $ DescriptionGSRK321 25.50 30A, 240V Kit (GD only)HR21 83.00 30A, 240V Kit (HD only)HR612 83.00 30A, 600V Kit/60A, 240V KitHR62 83.00 60A, 600V KitHR63 54.00 100A KitHR64 54.00 200A KitHR656 137.00 400A/600A KitClass J FusingAll 30-600A, 600V and 100-600A,240Vfusible Heavy Duty Switches are fieldconvertible to accept Class J fuses bymoving the load base to a pre-drilled Jfuse position. All 100-600A, 240Vfusible General Duty switches can alsobe field converted to accept Class Jfuses.Class T Fuse Adapter KitsAll 100-600A, General Duty and 100-1200A Heavy Duty Switches are fieldconvertible to accept Class T fuses.400-600A switches are field convertibleto accept Class T fuses by moving theload base to a pre-drilledT fuse position.Class T Fuse Adapter Kits Catalog ListNumber Price $ DescriptionHT23 76.00 100A, 240V KitHT63 120.00 100A, 600V KitHT24 102.00 200A, 240V KitHT64▲ 143.00 200A, 600V KitTFAK72 214.00 800A, 240V KitTFAK75 238.00 800A, 600V KitTFAK82 543.00 1200A, 240V KitNeutral KitsStandard Neutral Kits can be fieldinstalled in General and Heavy DutySwitches.Neutral KitsSwitchKit CatalogAmpere Rating Number List Price $30 GD W410190 71.0030 HD, 60 GD HN612 97.0060, 100 HD, 100 GD HN623 186.00200 HN64 186.00400 & 600 HN656 436.00800 & 1200 HN678 838.00HN264200% Neutral KitsUL listed 200% Neutrals are availableon 100-600A Heavy Duty Switches.They are typically used with non-lineartransformers or where increased neutralampacity/lug capacity is required.200% Neutral KitsSwitch Kit Wire RangeAmpere Catalog List Line & LoadRating Number Price $ Lugs (Cu/Al)100 HN263 225.00 (2) #14-1/0 AWG200 HN264 352.00 (2) #6 AWG-300 Kcmil400 HN656 436.00(2) 1/0 AWG-750 Kcmilor (4) 1/0 AWG-250 Kcmil600 HN678 838.00 (4) 1/0 AWG-750 Kcmil3 SAFETYSWITCHES▲ Built to order. Allow 6–8 weeks for delivery. One kit per pole required.Discount Schedule HDSSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog3-17

General and Heavy Duty Safety SwitchesAccessoriesSelection3SAFETYSWITCHESHA161234Auxiliary ContactsAuxiliary Contacts are available only for Heavy Duty Switches. The auxiliarycontacts are available in 1 normally open and 1 normally closed or 2 normallyopen and 2 normally closed configurations. Siemens offers a PLC AuxiliarySwitch (30-200A) that has very low resistance for low voltage and currenttypical in PLC circuits. All auxiliary contacts make after and break beforemain switch contacts.Auxiliary ContactsSwitch Aux. SwitchKit Ampere RatingKit Horsepower RatingAmpere Catalog List 125V AC 250V AC 28V DC 125V AC 250V AC 28V DCRating Number Price $ Max. Max. Max. Max. Max. Max.With 1 NO & 1 NC Isolated Contacts30-200 HA161234 239.00 10 10 — 1/2 3/4 —400-1200 HA165678 587.00 10 10 — 1/2 3/4 —With 2 NO & 2 NC Isolated Contacts30-200 HA261234 266.00 10 10 7 1/2 3/4 —400-1200 HA265678 614.00 10 10 7 1/2 3/4 —Low Current PLC Type with 1 NO & 1 NC Gold Plated Contacts30-200 HA361234 302.00 10 10 — 1/2 3/4 —400-1200 HA365678 643.00 10 10 — 1/2 3/4 —HA261234Fuse Puller KitsFuse Puller Kits are field installable in30-100A Type VBII Heavy Duty Switches(one kit required per 3-pole switch).Fuse Puller KitsSwitchAmpere Fuse Puller KitRating Catalog Number List Price $030 HP61 21.00060 HP62▲ 21.00100 HP63▲ 21.00HP61▲ Built to order. Allow 6–8 weeks for delivery.3-18Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule HDSS

General and Heavy Duty Safety SwitchesAccessoriesCopper Lug KitsHeavy duty switches are UL approved to acceptfield installed copper lug kits.SelectionCopper Lug KitsSwitch Copper LugAmpere Catalog ListRating Number Price $ Description30–60 HLC612 138.00 (9) Lugs/Kit #14-4 AWG Cu100 HLC63▲ 172.00 (9) Lugs/Kit #14-1/0 AWG Cu200 HLC64▲ 212.00 (9) Lugs/Kit #6 AWG-300 Kcmil Cu400–1200 HLC65678 37.50 (1) Lugs/Kit #1/0 AWG-600 Kcmil CuEquipment Ground KitsEquipment Ground Lug Kits are available for all Generaland Heavy Duty Switches. They are field installable inType 1 and Type 3R Switches and are factory installedas standard in Type 4 / 4X and Type 12 and also in allVBII 4&6-pole Switches.Equipment Ground KitsSwitchAmpere Catalog List Number of Wire RangeRating Number Price $ Terminals Per Terminal (Cu/Al)30A GD GSGK60 24.00 2 #14-8 AWG60–200 GD HG61234 24.00 2 #14-4 AWG30–200 HD HG61234 24.00 2 #14-4 AWG400 & 600 HG656 123.00 4 #14-2/0 AWG800–1200 HG678 239.00 8 #6 AWG-250 KcmilHLC612HG2612343 SAFETYSWITCHESIsolated Ground KitsIsolated Ground Kits are available on 30-600A Heavy DutySwitches. They are normally used on circuits with a highcontent of computer or other electronic loading whichrequire a ground which is isolated from the buildingground and neutral circuits. The kit includes bothisolated and grounded terminals as listed below.Isolated Ground KitsSwitchAmpere Catalog List Number of Terminals Wire RangeRating Number Price $ Isolated Grounded Per Terminal (Cu/Al)30–200 HG261234 51.00 2 2 #14-4 AWG400–600 HG2656 156.00 4 4 #14-2/0 AWG▲ Built to order. Allow 6–8 weeks for delivery.Discount Schedule HDSSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog3-19

General and Heavy DutyHub and Lug DataSelectionSSH150 ECHV300 ECHS200 SL04203SAFETYSWITCHESInterchangeable HubsConduit hubs are available for Type 3R,12 and 4 / 4X applications. 30-200AType 3R Switches are provided with aconduit hub provision and a removablehub plate on their top rainshed.HubsConduitSize Catalog List(inches) Number Price $ Used OnType 3R 3/4 ECHA075 36.501 ECHA100 36.50 30A GD Only1 1/4 ECHA125 36.50Cover ECHS000 38.003/4 ECHS075 39.501 ECHS100 39.501 1/4 ECHS125 39.50 60–200A GD1 1/2 ECHS150 39.50 30–200A HD2 ECHS200 69.002 1/2 ECHS250 109.002 1/2 ECHV250 125.003 ECHV300 182.003 1/2 ECHV350 274.00400–1200A4 ECHV400 362.00Type 4/4X 3/4 SSH075 46.001 SSH100 70.001 1/4 SSH125 74.00 30–200A1 1/2 SSH150 102.002 SSH200 139.00Note: 30 thru 200A. Type 3R Switches haveremovable hub plates on rainshed. 400A andlarger Type 3R Switches have no provisions formounting hubs. Drill or punch hole in the field toaccommodate hub size desired.■ Built to order. Allow 2-3 weeks for delivery. Hubs suitable for 3R Switches. Also suitable for Type 12 applications. Neutral Barrier kits are required on 30-100A switch onlyand only with 1-Phase / 3W or 3-Phase / 4W loads.Compression Lugs mounting kits are required on 400-1200A switches only. Provides mounting for a single line or load lug. Provides mounting for (2) compression lugs per phaseon line or load.3-20Compression Lug Mounting &Neutral Barrier KitAll Heavy Duty Switches are fieldconvertible for (Crimp) type lugs.When compression lugs are required for30-100A switches, a neutral barrier kit isrequired for 1-Phase, 3W or 3-Phase, 4Wapplications. When compression lugs arerequired on 400-1200A switches, lugmounting kits are required.Compression Lug Mounting and Neutral Barrier KitsSwitchAmpere Catalog ListRating Number Price $ Kit Description30 HCL612 6.40 Neutral Barrier Kit60 & 100 HCL623 9.70 Neutral Barrier Kit400 HCL65 19.001-Pole, CompressionLug Mounting Kit4001-Pole, CompressionHCL65678■& 600 22.50Lug Mounting Kit8001-Pole, CompressionHCL65678■& 1200 22.50Lug Mounting KitLugs30 & 60A Switches are suitable for usewith 60° or 75°C wire. 100–1200A aresuitable for use with 75°C rated wire.Wire Ranges (Line, Load and Standard Neutral) Line lugs are UL approved to accept #14-6 CU/Al cable. Max. wire size for height reduced switches is 500 kcmil(Cu/Al). All but 60A GD & Compact HD NF switches are also ULapproved for #2 Cu/Al conductors.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogMultiple Padlock AccessoryA tamper-proof device to provide formultiple padlocking to meet OSHA orplant requirements. Accepts up to 6padlocks. Catalog number SL0420.Standard Carton-12. List Price $74.00.Kirk-Key InterlocksKirk-Key Interlocks can be factoryinstalledonly on Type VBII Heavy Dutyand Double Throw Safety Switches.Interlocks are used to prevent theoperator from making an unauthorizedoperation. The interlock system is asimple method of applying key interlocksto safety switches so as torequire operation in a predeterminedsequence. List Price $1675.00.Before consulting the factory, thefollowing information is required:▪ User name and address▪ Key number from lock assemblieson any existing locks to beinterlocked with▪ Complete locking schemeConsult factory for delivery.Switch Wire Range withAmpere Wire Bending SpaceRating Per NEC Requirements Lug Wire Range30GD #14-8 AWG (Cu/AI) #14-8 AWG (Cu/Al)30HD #14-6 AWG (Cu/AI) #14-2 AWG (Cu/Al)60 #14-3 AWG (Cu/AI) #14-2 AWG (Cu/Al)100 #14-1/0 AWG (Cu/Al) #14-1/0 AWG (Cu/Al)200 #6 AWG-250 Kcmil (Cu/Al) #6 AWG-300 Kcmil (Cu/Al)400 1/0 AWG-750 Kcmil (Cu/Al) or (1) 1/0 AWG-750 Kcmil (Cu/Al) or(2) 1/0 AWG-250 Kcmil (Cu/Al) (2) 1/0 AWG-250 Kcmil (Cu/Al)600 (2) 1/0 AWG-750 Kcmil (Cu/Al) or (2) 1/0 AWG-750 Kcmil (Cu/Al) or(4) 1/0 -250 Kcmil (Cu/Al) (4) 1/0 AWG-250 Kcmil (Cu/Al)800 (3) 1/0 AWG-750 Kcmil (Cu/Al) Line Load or (3) 1/0 AWG-750 Kcmil (Cu/Al) Line Load or(6) 1/0 AWG-250 Kcmil (Cu/Al) (6) 1/0 AWG-250 Kcmil (Cu/Al)(4) 1/0 AWG-750 Kcmil (Cu/Al) neutral (4) 1/0 AWG-750 Kcmil (Cu/Al) neutral1200 (4) 3/0 AWG-750 Kcmil (Cu/Al) Line Load (4) 1/0 AWG-750 Kcmil (Cu/Al) Line Load(4) 1/0 AWG-750 Kcmil (Cu/Al) neutral (4) 1/0 AWG-750 Kcmil (Cu/Al) neutral All 200A Heavy Duty Switches have a wire range& wire bending space for (1) #6-300 Kcmil (Cu/Al). Also for 30A oversized heavy duty switches. Also for 60A oversized heavy duty switches.Discount Schedule HDSS & RESI

General and Heavy Duty Safety SwitchesSafety Switch Dimensions (Inches)* & Shipping WeightsDimensionsHeight Width DepthWith With With With Knockout ShippingCatalog Box Door Rain Shed Box Handle Box Handle Diagram WeightNumber A B C D E F G(lbs.)GF221N 7.97 8.13 — 5.50 5.94 3.00 5.88 S1 35 (10)GF221NR 8.07 — 8.16 5.16 5.94 3.13 5.88 S3 35 (10)GF222N 14.26 15.45 — 6.64 8.70 5.05 8.63 S6 14GF222NR 14.39 — 15.76 6.64 8.70 5.05 8.63 S8 14GF223N 21.95 23.15 — 9.64 11.70 5.05 8.63 S10 23GF223NR 21.95 — 23.46 9.64 11.67 5.05 8.70 S11 24GF224N 29.90 31.07 — 14.62 16.68 6.36 10.92 S12 47GF224NR 29.90 — 31.42 14.61 16.68 6.36 10.92 S13 48GF225N 56.00 56.57 — 24.65 26.21 9.23 14.68 S14 153GF225NH 45.25 45.82 — 24.65 26.21 9.23 14.68 S14 128GF225NR 56.07 — 57.19 24.65 26.70 9.23 14.68 S15 157GF225NRH 45.31 — 46.44 24.65 26.70 9.23 14.68 S15 130GF226N 56.00 56.57 — 24.64 26.21 9.23 14.68 S14 155GF226NH 45.25 45.82 — 24.65 26.21 9.23 14.68 S14 133GF226NR 56.07 — 57.19 24.64 26.70 9.23 14.68 S15 159GF226NRH 45.31 — 46.44 24.65 26.70 9.23 14.68 S15 135GF321N 7.97 8.19 — 7.19 7.69 3.00 5.88 S2 24 (5)GF321NR 8.07 — 8.16 7.19 8.16 3.13 5.88 S4 24 (5)GF322N 14.26 15.45 — 6.64 8.70 5.05 8.63 S6 15GF322NR 14.39 — 15.76 6.64 8.70 5.05 8.63 S8 15GF323N 21.95 23.15 — 9.64 11.70 5.05 8.63 S10 25GF323NR 21.95 — 23.46 9.64 11.67 5.05 8.70 S11 25GF324N 29.90 31.07 — 14.62 16.68 6.36 10.92 S12 49GF324NR 29.90 — 31.42 14.61 16.68 6.36 10.92 S13 50GF325N 56.00 56.57 — 24.65 26.21 9.23 14.68 S14 158GF325NH 45.25 45.82 — 24.65 26.21 9.23 14.68 S14 136GF325NR 56.07 — 57.19 24.65 26.70 9.23 14.68 S15 162GF325NRH 45.31 — 46.44 24.65 26.70 9.23 14.68 S15 138GF326N 56.00 56.57 — 24.65 26.21 9.23 14.68 S14 161GF326NH 45.25 45.82 — 24.65 26.21 9.23 14.68 S14 138GF326NR 56.07 — 57.19 24.65 26.70 9.23 14.68 S15 165GF326NRH 45.31 — 46.44 24.65 26.70 9.23 14.68 S15 141GNF321 7.97 8.19 — 7.19 7.69 3.00 5.88 S2 24 (5)GNF321R 8.07 — 8.16 7.19 7.69 3.13 5.88 S4 24 (5)GNF322 11.11 12.31 — 6.64 8.71 5.05 8.61 S7 12GNF322R 11.11 — 12.62 6.64 8.71 5.05 8.61 S9 13GNF323 21.95 23.15 — 9.64 11.70 5.05 8.63 S10 23GNF323R 21.95 — 23.46 9.64 11.67 5.05 8.70 S11 24GNF324 29.90 31.07 — 14.62 16.68 6.36 10.92 S12 46GNF324R 29.90 — 31.42 14.61 16.68 6.36 10.92 S13 47GNF325 44.00 44.57 — 24.65 26.21 9.23 14.68 S14 114GNF326 44.00 44.57 — 24.65 26.21 9.23 14.68 S14 116HF221J 14.27 17.33 — 6.65 9.02 5.32 10.46 — 13HF221N 14.26 15.45 — 6.64 9.01 5.05 10.17 S6 12HF221NR 14.39 — 15.77 6.64 9.01 5.05 10.17 S8 13HF221S 14.27 17.33 — 6.65 9.02 5.32 10.46 — 13HF222J 16.22 19.31 — 9.17 11.47 5.33 10.46 — 19HF222N 16.26 17.46 — 9.15 11.53 5.05 10.17 S16 18HF222NR 16.26 — 17.77 9.16 11.53 5.05 10.17 S17 19HF222S 16.22 19.31 — 9.17 11.47 5.33 10.46 — 19HF223J 21.96 23.16 — 9.65 12.02 5.34 10.46 — 24HF223N 21.95 23.15 — 9.64 12.01 5.05 10.17 S10 23HF223NR 21.95 — 23.46 9.64 11.97 5.05 10.17 S11 243 SAFETYSWITCHES*For inches / millimeters conversion, multiply inchesby 25.4. Knocks not provided on Type 4 / 4X and 12 or in 800 &1200A switches.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog3-21

3SAFETYSWITCHESGeneral and Heavy Duty Safety SwitchesSafety Switch Dimensions (Inches)* & Shipping WeightsDimensionsHeight Width DepthWith With With With Knockout ShippingCatalog Box Door Rain Shed Box Handle Box Handle Diagram WeightNumber A B C D E F G(lbs.)HF223S 21.96 23.16 — 9.65 12.02 5.34 10.46 — 24HF224J 29.96 31.07 — 14.62 16.95 6.63 12.58 — 48HF224N 29.90 31.07 — 14.62 16.98 6.36 12.33 S12 47HF224NR 29.90 — 31.42 14.61 16.99 6.36 12.33 S13 48HF224S 29.96 31.07 — 14.62 16.95 6.63 12.58 — 48HF225N 56.00 56.57 — 24.65 26.21 9.23 14.68 S14 153HF225NH 45.25 45.82 — 24.65 26.21 9.23 14.68 S14 129HF225NR 56.07 — 57.19 24.65 26.70 9.23 14.68 S15 162HF225NRH 45.31 — 46.44 24.65 26.70 9.23 14.68 S15 131HF226N 56.00 56.57 — 24.65 26.21 9.23 14.68 S14 155HF226NH 45.25 45.82 — 24.65 26.21 9.23 14.68 S14 133HF226NR 56.07 — 57.19 24.65 26.70 9.23 14.68 S15 159HF226NRH 45.31 — 46.44 24.65 26.70 9.23 14.68 S15 135HF227N 66.25 66.82 — 38.40 39.96 9.24 14.68 — 360HF227NR 66.25 — 67.36 38.40 39.96 9.24 14.68 — 362HF228N 66.25 66.82 — 38.40 39.96 9.24 14.68 — 362HF228NR 66.25 — 67.36 38.40 39.96 9.24 14.68 — 364HF265 56.00 56.57 — 24.65 26.21 9.23 14.68 S14 149HF265J 56.14 56.57 — 24.82 26.44 9.19 14.64 — 155HF265R 56.07 — 57.19 24.65 26.70 9.23 14.68 S15 152HF265S 56.14 56.57 — 24.82 26.44 9.19 14.64 — 153HF266 56.00 56.57 — 24.65 26.21 9.23 14.68 S14 155HF266J 56.14 56.57 — 24.82 26.44 9.19 14.68 — 156HF266R 56.07 — 57.19 24.65 26.70 9.23 14.68 S15 155HF266S 56.14 56.57 — 24.82 26.44 9.19 14.68 — 161HF321J 14.27 17.33 — 6.65 9.02 5.32 10.46 — 14HF321N 14.26 15.45 — 6.64 9.01 5.05 10.17 S6 14HF321NR 14.39 — 15.77 6.64 9.01 5.05 10.17 S8 15HF321S 14.27 17.33 — 6.65 9.02 5.32 10.46 — 14HF322J 16.27 19.31 — 9.17 11.47 5.33 10.46 — 20HF322N 16.26 17.46 — 9.15 11.53 5.05 10.17 S16 19HF322NR 16.26 — 17.77 9.16 11.53 5.05 10.17 S17 20HF322S 16.27 19.31 — 9.17 11.47 5.33 10.46 — 20HF323J 21.96 23.16 — 9.65 12.02 5.34 10.46 — 25HF323N 21.95 23.15 — 9.64 12.01 5.05 10.17 S10 25HF323NR 21.95 — 23.46 9.64 11.97 5.05 10.17 S11 26HF323S 21.96 23.16 — 9.65 12.02 5.34 10.46 — 25HF324J 29.96 31.07 — 14.62 16.95 6.63 12.58 — 49HF324N 29.90 31.07 — 14.62 16.98 6.36 12.33 S12 49HF324NR 29.90 — 31.42 14.61 16.99 6.36 12.33 S13 50HF324S 21.96 31.07 — 14.62 16.95 6.63 12.58 — 49HF325J 56.14 56.57 — 24.82 26.44 9.19 14.64 — 160HF325N 56.00 56.57 — 24.65 26.21 9.23 14.68 S14 158HF325NH 45.25 45.82 — 24.65 26.21 9.23 14.68 S14 137HF325NR 56.07 — 57.19 24.65 26.70 9.23 14.68 S15 162HF325NRH 45.31 — 46.44 24.65 26.70 9.23 14.68 S15 138HF325S 56.14 56.57 — 24.82 26.44 9.19 14.64 — 158HF326J 56.14 56.57 — 24.82 26.44 9.19 14.64 — 161HF326N 56.00 56.57 — 24.64 26.21 9.23 14.68 S14 161HF326NH 45.25 45.82 — 24.65 26.21 9.23 14.68 S14 139HF326NR 56.07 — 57.19 24.64 26.70 9.23 14.68 S15 165HF326NRH 45.31 — 46.44 24.65 26.70 9.23 14.68 S15 142HF326S 56.14 56.57 — 24.82 26.44 9.19 14.64 — 161HF327J 66.25 66.82 — 38.40 39.96 9.24 14.68 — 367HF327N 66.25 66.82 — 38.40 39.96 9.24 14.68 — 380HF327NR 66.25 — 67.36 38.40 40.25 9.24 14.68 — 383HF327S 66.25 66.82 — 38.40 39.96 9.24 14.68 — 367HF328N 66.25 66.82 — 38.40 39.96 9.24 14.68 — 382HF328NR 66.25 — 67.36 38.40 40.25 9.24 14.68 — 385HF361 14.26 15.45 — 6.64 9.01 5.05 10.17 S6 14HF361J, JW 14.27 17.33 — 6.65 9.02 5.32 10.46 — 14HF361L 16.26 17.46 — 9.15 11.53 5.05 10.17 S16 19HF361N 14.26 15.45 — 6.64 9.01 5.05 10.17 S6 14HF361NR 14.39 — 15.77 6.64 9.01 5.05 10.17 S8 15HF361R 14.39 — 15.77 6.64 9.01 5.05 10.17 S8 15HF361RL 16.26 — 17.77 9.16 11.53 5.05 10.17 S17 20HF361S, SW 14.27 17.33 — 6.65 9.02 5.32 10.46 — 15HF362 16.26 17.46 — 9.15 11.53 5.05 10.17 S16 19*For inches / millimeters conversion, multiply inchesby 25.4. Knocks not provided on Type 4 / 4X and 12 or in 800 &1200A switches.3-22Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

General and Heavy Duty Safety SwitchesSafety Switch Dimensions (Inches)* & Shipping WeightsDimensionsHeight Width DepthWith With With With Knockout ShippingCatalog Box Door Rain Shed Box Handle Box Handle Diagram WeightNumber A B C D E F G(lbs.)HF362J, JW 16.27 19.31 — 9.17 11.47 5.33 10.46 — 20HF362N 16.26 17.46 — 9.15 11.53 5.05 10.17 S16 19HF362NR 16.26 — 17.77 9.16 11.53 5.05 10.17 S17 20HF362R 16.26 — 17.77 9.16 11.53 5.05 10.17 S17 20HF362RL 21.95 — 23.46 9.64 11.97 5.05 10.17 S11 25HF362S, SW 16.27 19.31 — 9.17 11.47 5.33 10.46 — 20HF363 21.95 23.15 — 9.64 12.01 5.05 10.17 S10 24HF363J, JW 21.96 23.16 — 9.65 12.02 5.34 10.46 — 25HF363N 21.95 23.15 — 9.64 12.01 5.05 10.17 S10 25HF363NR 21.95 — 23.46 9.64 11.97 5.05 10.17 S11 26HF363R 21.95 — 23.46 9.64 11.97 5.05 10.17 S11 25HF363S 21.96 23.16 — 9.65 12.02 5.34 10.46 — 25HF364 29.90 31.07 — 14.62 16.98 6.36 12.33 S12 48HF364J, JW 29.96 31.07 — 14.62 16.95 6.63 12.58 — 49HF364N 29.90 31.07 — 14.62 16.98 6.36 12.33 S12 49HF364NR 29.90 — 31.42 14.61 16.99 6.36 12.33 S13 48HF364R 29.90 — 31.42 14.61 16.99 6.36 12.33 S13 49HF364S, SW 29.96 31.07 — 14.62 16.95 6.63 12.58 — 49HF365 56.00 56.57 — 24.65 26.21 9.23 14.68 S14 154HF365H 45.25 45.82 — 24.65 26.21 9.23 14.68 S14 136HF365J, JW 56.14 56.57 — 24.82 26.44 9.19 14.64 — 160HF365N 56.00 56.57 — 24.65 26.21 9.23 14.68 S14 158HF365NR 56.07 — 57.19 24.65 26.70 9.23 14.68 S15 162HF365R 56.07 — 57.19 24.65 26.70 9.23 14.68 S15 157HF365RH 45.25 45.82 — 24.65 26.70 9.23 14.68 S15 137HF365S, SW 56.14 56.57 — 24.82 26.44 9.19 14.64 — 158HF366 56.00 56.57 — 24.64 26.21 9.23 14.68 S14 157HF366H 45.25 45.82 — 24.65 26.21 9.23 14.68 S14 138HF366J, JW 56.14 56.57 — 24.82 26.44 9.19 14.64 — 161HF366N 56.00 56.57 — 24.65 26.21 9.23 14.68 S14 161HF366NR 56.07 — 57.19 24.65 26.70 9.23 14.68 S15 165HF366R 56.07 — 57.19 24.65 26.70 9.23 14.68 S15 161HF366RH 45.25 45.82 — 24.65 26.70 9.23 14.68 S15 141HF366S 56.14 56.57 — 24.82 26.44 9.19 14.64 — 161HF367 66.25 66.82 — 38.40 39.96 9.24 14.68 — 380HF367J 66.25 66.82 — 38.40 39.96 9.24 14.68 — 380HF367N 66.25 66.82 — 38.40 39.96 9.24 14.68 — 382HF367NR 66.25 — 67.36 38.40 40.25 9.24 14.68 — 386HF367R 66.25 — 67.36 38.40 40.25 9.24 14.68 — 382HF367S 66.25 66.82 — 38.40 39.96 9.24 14.68 — 380HF368, J, S 66.25 66.82 — 38.40 39.96 9.24 14.68 — 383HF368N 66.25 66.82 — 38.40 39.96 9.24 14.68 — 385HF368NR 66.25 — 67.36 38.40 40.25 9.24 14.68 — 388HF368R 66.25 — 67.36 38.40 40.25 9.24 14.68 — 385HNF265 44.00 44.57 — 24.65 26.21 9.23 14.68 S14 109HNF265J 44.14 44.57 — 24.82 26.44 9.19 14.64 — 119HNF265R 44.07 — 45.19 24.65 26.70 9.23 14.68 S15 118HNF265S 44.14 44.57 — 24.82 26.44 9.19 14.64 — 118HNF266 44.00 44.57 — 24.65 26.21 9.23 14.68 S14 111HNF266J 44.14 44.57 — 24.82 26.44 9.19 14.64 — 115HNF266R 44.07 — 45.19 24.64 26.70 9.23 14.68 S15 120HNF266S 44.14 44.57 — 24.82 26.44 9.19 14.64 — 115HNF361 11.11 12.31 — 6.64 9.01 5.05 10.17 S7 12HNF361J, JW 11.12 14.14 — 6.65 9.02 5.56 10.46 — 13HNF361R 11.11 — 12.63 6.64 9.01 5.05 10.17 S9 13HNF361RL 16.26 — 17.77 9.16 11.53 5.05 10.17 S17 20HNF361S, SW 11.12 14.14 — 6.65 9.02 5.56 10.46 — 13HNF362 16.26 17.46 — 9.15 11.53 5.05 10.17 S16 18HNF362J, JW 16.27 17.46 — 9.17 11.47 5.33 10.46 — 19HNF362R 16.26 — 17.77 9.16 11.53 5.05 10.17 S17 19HNF362RL 21.95 — 23.46 9.64 11.97 5.05 10.17 S11 24HNF362S, SW 16.27 17.46 — 9.17 11.47 5.33 10.46 — 19HNF363 21.95 23.15 — 9.64 12.01 5.05 10.17 S10 23HNF363J, JW 21.96 23.16 — 9.65 12.02 5.34 10.46 — 24HNF363R 21.95 — 23.46 9.64 11.97 5.05 10.17 S11 24HNF363S, SW 21.96 23.16 — 9.65 12.02 5.34 10.46 — 24HNF364 29.90 31.07 — 14.62 16.98 6.36 12.33 S12 46HNF364J, JW 29.96 31.07 — 14.62 16.95 6.63 12.58 — 47HNF364R 29.90 — 31.42 14.61 16.99 6.36 12.33 S13 47HNF364S, SW 29.96 31.07 — 14.62 16.95 6.63 12.58 — 47*For inches / millimeters conversion, multiply inches by 25.4. Knocks not provided on Type 4 / 4X and 12 or in 800 & 1200A switches.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 3-233 SAFETYSWITCHES

AAAAA3SAFETYSWITCHESGeneral and Heavy Duty Safety SwitchesSafety Switch Dimensions (Inches)* & Shipping WeightsDimensionsHeight Width DepthWith With With With Knockout ShippingCatalog Box Door Rain Shed Box Handle Box Handle Diagram WeightNumber A B C D E F G(lbs.)HNF365 44.00 44.57 — 24.65 26.21 9.23 14.68 S14 114HNF365J, JW 44.14 44.57 — 24.82 26.44 9.19 14.64 — 114HNF365R 44.07 — 45.19 24.65 26.95 9.23 14.68 S15 118HNF365S, SW 44.14 44.57 — 24.82 26.44 9.19 14.64 — 118HNF366 44.00 44.57 — 24.65 26.21 9.23 14.68 S14 116HNF366J, S 44.14 44.57 — 24.82 26.44 9.19 14.64 — 115HNF366R 44.07 — 45.19 24.65 26.95 9.23 14.68 S15 120HNF367, J 54.25 54.82 — 38.40 39.96 9.24 14.68 — 302HNF367R 54.25 — 55.36 38.40 40.25 9.24 14.68 — 304HNF367S 54.25 54.82 — 38.40 39.96 9.24 14.68 — 302HNF368, J, S 54.25 54.82 — 38.40 39.96 9.24 14.68 — 305HNF368R 54.25 54.82 — 38.40 40.25 9.24 14.68 — 307LF111N 7.97 8.13 — 5.50 5.94 3.00 5.38 S2 35 (10)LF111NR 8.07 — 8.16 5.16 5.94 3.13 5.38 S3 35 (10)LF211N 7.97 8.13 — 5.50 5.94 3.00 5.38 S1 35 (10)LF211NR 8.07 — 8.16 5.16 5.94 3.13 5.38 S3 35 (10)LNF222R 8.07 — 8.16 5.16 5.94 3.13 5.38 S5 35 (10)Type 1 or 3R30A GDType 1 or 3R60-200A GD, 30-200A HD Type VBIIType 4/4X or 1230-200A HD Type VBIIEGEGBorCBorCBorCDEFGDFDFType 1 or 3R400-1200A Type VBII (GD & HD)EGType 4/4X or 12400-1200A HD Type VBIIEGBorCBorCDFDF*For inches / millimeters conversion, multiply inchesby 25.4. Knocks not provided on Type 4 / 4X and 12 or in 800 &1200A switches.3-24Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

General and Heavy Duty Safety SwitchesType 1 & 3R EnclosuresKnockout DiagramsRemovableplate coveringHA TypeHub opening(Max. 1.25 Conduit)S1Embossed .25 in.mounting holes(4 places)4 K.O.'s forConduit 0.5-0.75 in.S2Embossed .25 in.mounting holes(4 places)2 K.O.'s forConduit 0.5-0.75 in.S3Embossed .25 in.mounting holes(3 places)2 K.O.'s forConduit 0.5-0.75 in.7 K.O.'s for Conduit 0.5-0.75-1 in.Removableplate coveringHA TypeHub opening(Max. 1.25 Conduit)10 K.O.'s for Conduit 0.5-0.75-1 in.3 K.O.'s for Conduit 0.5-0.75-1 in.10 K.O.'s For Conduit0.50, 0.75, 1 in.4 K.O.'s for Conduit0.75, 1 in.3 SAFETYSWITCHESS4Embossed .25 in.mounting holes(3 places)S5Embossed .25 in.mounting holes(3 places)S68 K.O.'s for Conduit0.50, 0.75, 1 in.2 K.O.'s forConduit 0.5-0.75 in.4 K.O.'s for Conduit 0.5-0.75-1 in.4 K.O.'s for Conduit0.75, 1 in.2 K.O.'s forConduit 0.5-0.75 in.3 K.O.'s for Conduit 0.5-0.75-1 in.Removable plate coveringHS Type Hub opening(Max. 2.5 Conduit)2 0.25 dia. K.O'sRemovable plate coveringHS Type Hub opening(Max. 2.5 Conduit)S7S8S92 0.25 dia. K.O's2 K.O.'s for Conduit0.75, 1 in.5 K.O.'s for Conduit0.50, 0.75, 1 in.1 0.25 dia. K.O.Removable plate coveringHS Type Hub opening(Max. 2.5 Conduit)2 K.O.'s for Conduit0.75, 1 in.5 K.O.'s for Conduit0.50, 0.75, 1 in.1 0.25 dia. K.O.S10S11S122 0.25 dia. K.O.4 K.O.'s for Conduit0.75, 1, 1.25, 1.50 in.10 K.O.'s for Conduit1, 1.25, 1.50, 2 in.1 0.88 dia. K.O.5 K.O.'s for Conduit1, 1.25, 1.50, 2 in.2 K.O.'s for Conduit0.75, 1, 1.25, 1.50 in.1 0.88 dia. K.O.1 0.25 dia. K.O.1 0.88 dia. K.O.14 K.O.'s for Conduit1.25, 1.50, 2.00, 2.50 in.1 0.25 dia. K.O.*For inches / millimeters conversion, multiply inchesby 25.4.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog3-25

General and Heavy Duty Safety SwitchesType 1 & 3R EnclosuresKnockout DiagramsRemovable plate coveringHS Type Hub opening(Max. 2.5 Conduit)S13S14S151, 0.25, dia. K.O37 K.O.'s for Conduit1.25, 1.50, 2.00, 2.50 in.1 0.88 dia K.O.8 K.O.'s for Conduit2.00, 2.50, 3.00, 3.50 in.4 0.50, 0.75 dia. K.O.'s4 K.O.'s for Conduit2.00, 2.50, 3.00, 3.50 in.2 0.50, 0.75 dia. K.O.'sSAFETYSWITCHESRemovable plate coveringHS Type Hub opening(Max. 2.5 Conduit)S16S172 0.25 dia. K.O.1 0.25 dia. K.O.14 K.O.'s for Conduit0.50, 0.75, 1, 1.25 in.1 0.88 dia. K.O.7 K.O.'s for Conduit0.50, 0.75, 1, 1.25 in.1 0.88 dia. K.O.*For inches / millimeters conversion, multiply inchesby 25.4.3-26Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Special Application Safety Switches Dimension DrawingsNon-MetallicDimensions4 X 0.50(12.70)WCFNon-MetallicGHAEBJD3 SAFETYSWITCHESCatalogDimensions (Inches) Non-MetallicNumber H W D A B C E F G JHF321NX 18.75 12.11 10.25 16.59 10.97 7.00 17.50 1.98 .46 9.20HF322NX 18.75 12.11 10.25 16.59 10.97 7.00 17.50 1.98 .46 9.20HF361NX 18.75 12.11 10.25 16.59 10.97 7.00 17.50 1.98 .46 9.20HF362NX 18.75 12.11 10.25 16.59 10.97 7.00 17.50 1.98 .46 9.20HF363NX 26.95 14.87 13.25 24.84 13.72 6.25 25.75 3.75 .46 12.15HF364NX 33.41 27.47 13.19 31.31 26.31 18.50 32.25 3.91 .47 12.10HNF361X 18.75 12.11 10.25 16.59 10.97 7.00 17.50 1.98 .46 9.20HNF362X 18.75 12.11 10.25 16.59 10.97 7.00 17.50 1.98 .46 9.20HNF363X 26.95 14.87 13.25 24.84 13.72 6.25 25.75 3.75 .46 12.15HNF364X 33.41 27.47 13.19 31.31 26.31 18.50 32.25 3.91 .47 12.10VBII Interlocked Receptacle SwitchesAmpereDimensions (Inches)Rating A B C D E F GCr-H Type Fusible (240 & 600V)30 14.27 7.42 9.02 6.22 1.52 6.1 6.060 16.27 9.17 11.47 6.34 1.52 6.4 7.4100 21.96 9.65 12.02 6.80 1.52 6.5 7.6Cr-H Type Non-Fusible (600V max.)30 14.27 7.42 9.02 6.22 1.52 6.1 6.060 16.27 9.17 11.47 6.34 1.52 6.4 7.4100 21.96 9.65 12.02 6.80 1.52 6.5 7.6Pyle-National Type Fusible (240 & 600V)30 14.27 7.42 9.02 6.22 1.52 3.5 3.060 16.27 9.17 11.47 6.34 1.52 5.0 4.5Pyle-National Type Non-Fusible (600V max.)30 14.27 7.42 9.02 6.22 1.52 3.5 3.060 16.27 9.17 11.47 6.34 1.52 5.0 4.5BCDFEAG*For inches / millimeters conversion, multiply inchesby 25.4. Dimensions also apply to “L” suffix switches (lesslugs).Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog3-27

3SAFETYSWITCHESSpecial Application Safety Switches Dimension Drawings4-Pole & 6-Pole4 & 6-Pole Safety Switch Dimensions – Inches (mm)EnclosureMountingCatalogNumber A B C D E FFigure 1, 4-Pole Fusible and Non-fusible, Type 1HNF461 24.50 (622) 9.53 (242) 6.09 (155) 19.00 (483) 6.75 (171) 0.268 (7)HF461 29.12 (740) 9.53 (242) 6.09 (155) 23.50 (597) 6.75 (171) 0.268 (7)HNF462 24.88 (632) 11.50 (292) 6.09 (155) 19.00 (483) 9.38 (238) 0.268 (7)HF462 33.53 (852) 11.50 (292) 6.09 (155) 27.50 (699) 9.38 (238) 0.268 (7)HNF463 27.62 (702) 12.18 (309) 6.09 (155) 19.36 (492) 8.00 (203) 0.268 (7)HF463 36.44 (926) 12.18 (309) 6.09 (155) 28.11 (714) 8.00 (203) 0.268 (7)HNF464 36.00 (914) 19.12 (486) 6.42 (163) 30.88 (784) 15.00 (381) 0.44 (11)HF464 49.48 (1257) 19.12 (486) 6.42 (163) 45.50 (1130) 15.00 (381) 0.44 (11)Figure 2, 4 & 6-Pole Fusible Type 12/3R and 4XHF461J, HF661J, 29.50 (622) 9.53 (242) 6.48 (165) 31.65 (804) 5.47 (139) 0.27 (7)HF661SHF462J, HF662J, 33.53 (852) 11.50 (292) 6.48 (165) 35.69 (907) 8.00 (203) 0.27 (7)HF662SHF463J, HF663J, 36.44 (926) 12.18 (309) 6.48 (165) 38.67 (982) 8.47 (215) 0.27 (7)HF663SHF464J, HF664J, 49.48 (1257) 19.12 (486) 6.78 (172) 51.64 (1312) 13.44 (341) 0.33 (8)HF664SFigure 2, 4 & 6-Pole Non-fusible Type 12/3R and 4XHNF461J, HNF661J, 24.50 (622) 9.53 (242) 6.48 (165) 26.65 (667) 5.47 (139) 0.27 (7)HNF661SHNF462J, HNF662J, 24.88 (632) 11.50 (292) 6.48 (165) 27.03 (687) 8.00 (203) 0.27 (7)HNF662SHNF463J, HNF663J, 27.54 (700) 12.18 (309) 6.48 (165) 29.77 (756) 8.47 (215) 0.27 (7)HNF663SHNF464J, HNF664J, 36.00 (914) 19.12 (486) 6.78 (172) 38.16 (969) 13.44 (341) 0.33 (8)HNF664SDimensionsFigure 1: Type 1Figure 2 : Type 12/3R and 4X3-28Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Special Application Safety Switches Dimension DrawingsDouble ThrowDescriptionDouble throw switches are intended to transferloads from one power source to another. All 2 &3-pole double throw switches are suitable foruse as service equipment. All are UL Listed andboth horsepower and load break rated.Switches are rated for use on systems up to10,000A when protected with Class H fuses or100,000A when protected with Class R or ClassT fuses . They can also be used to connect asingle source of power to either of two loads. Inthis application it is necessary to field modifyDouble Throw Switchesfusible switches so that the fuses are on theload side of the switching mechanism.A cover interlock is provided on all ampereratings. The operating handle may bepadlocked in the off position.Fuse Capabilities of Fusible DTF SwitchesAmpRatingFuse TypeH R T J30 & 60A, 240V Std Yes (kit) No No30 & 60A, 600V Std Yes (kit) No Yes 100 & 200A Std Yes (kit) Yes (kit) Yes 400 & 600A (DTF) No No Yes StdSelectionType 1 — Indoor Type 3R — Outdoor Type 12/3R — Industrial Type 4X — Stainless SteelNumber Catalog List Catalog List Catalog List Catalog ListSystem Voltage of Poles Amps Number Price $ Number Price $ Number Price $ Number Price $Heavy Duty Fusible (30-200A) with Class H fuse spacings 2 200 DTF224▲ 4043.00 DTF224R 5633.00 — — — —240 30 DTF321 1180.00 DTF321R▲ 1733.00 — — — —Volt AC 60 DTF322 2119.00 DTF322R▲ 2844.00 — — — —or100 DTF323▲ 3551.00 DTF323R 4020.00 — — — —3250 200 DTF324 5233.00 DTF324R 6866.00 — — — —Volt DC 400 DTF325 12487.00 FR325DTK ▲ 14403.00 — — — —600 DTF326▲ 13503.00 FR326DTK ▲ 15944.00 — — — —30 DTF361 2265.00 — — — — — —600 60 DTF362▲ 2376.00 — — — — — —Volt AC, 3 100 DTF363 4177.00 DTF363R 5408.00 — — F353SSDTK▲ 14502.00250 200 DTF364 6143.00 DTF364R 7991.00 — — F354SSDTK▲ 17873.00Volt DC 400 DTF365 12778.00 FR355DTK ▲ 14650.00 — — F355SSDTK ▲ 29061.003 SAFETYSWITCHES30 DTNF221 672.00 — — — — — —60 DTNF222 1062.00 — — — — — —2 100 DTNF223 1485.00 — — — — — —200 DTNF224 1953.00 DTNF224R 2557.00 — — — —240400 DTNF225 5599.00 DTNF225R 8618.00 — — — —Volt ACor30 DTNF321 795.00 — — — — — —250Volt DC60 DTNF322 1271.00 — — — — — —100 DTNF323 1924.00 DTNF323R 2210.00 — — — —3 200 DTNF324 2804.00 DTNF324R 3556.00 — — — —400 DTNF325 7859.00 — — — — — —600 DTNF326 10523.00 — — — — — —800 DTNF327▲ 16275.00 — — — — — —30 DTNF361 893.00 DTNF361R 1538.00 DTNF361J 1850.00 DTNF361S 4624.0060 DTNF362 1236.00 DTNF362R 2041.00 DTNF362J 2517.00 DTNF362S 6196.00100 DTNF363 2053.00 DTNF363R 3567.00 DTNF363J 3297.00 DTNF363S 9254.003 200 DTNF364 3003.00 DTNF364R 5040.00 DTNF364J▲ 7125.00 DTNF364S 11220.00400 DTNF365 8033.00 DTNF365R 13137.00 NF355HDTK 13283.00 NF355SSDTK 23311.00600600 DTNF366 11760.00 DTNF366R 16589.00 — — — —Volt AC,800 DTNF367 18092.00 DTNF367R 19178.00 — — — —or1200 DTNF368▲ 24760.00 DTNF368R 26601.00 — — — —250Volt DC 30 — — NFR451DTK▲ 4106.00 — — — —60 — — NFR452DTK▲ 4373.00 — — — —100 — — NFR453DTK▲ 6489.00 — — — —4 200 NF454DTK 5192.00 NFR454DTK▲ 8758.00 — — NF454SSDTK▲ 19858.00400 NF455DTK▲ 13378.00 NFR455DTK▲ 18123.00 — — — —600 NF456DTK▲ 17588.00 NFR456DTK▲ 22291.00 — — — —800 NF457DTK▲ 44586.00 NFR457DTK▲ 54653.00 — — — —General Duty Non-Fusible Type 3R — Outdoor Type 3R — Outdoor Less NeutralWith Neutral100 DTGNF223R 1150.00 DTGNF223NR 1349.00 — — — —2240 200 DTGNF224R 1850.00 DTGNF224NR 2202.00 — — — —Volt AC100 DTGNF323R 1678.00 DTGNF323NR 1890.00 — — — —3200 DTGNF324R 2097.00 DTGNF324NR 2432.00 — — — —▲ Built to order. Allow 3–4 weeks for delivery. Use HS Type hubs for 30–200A switches.400A and larger switches do not have hub provisions. All Heavy Duty double throw switches with a catalognumber starting with “DT” are rated 200,000 AIC max.when protected by Class R, J or T fuses. Fuse ampererating must not exceed switch ampere rating. Move load base. Will accept class T Fuses only. 4-pole switches are not approved for service entrance.Discount Schedule HDSSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog3-29

3SAFETYSWITCHESSafety SwitchesDouble ThrowAccessories, Lug Data and Horsepower RatingsCatalog ListDescription Number Price $30A HNC612 97.0060 & 100A HN263 225.00Neutral Kits 200A HNC264 352.00400 & 600A HN678 838.00800 & 1200A HND678 919.00EquipmentGround Kit30-200A (2) #14-4 AWG HG61234 24.00400 & 600A (4) #14-2/0 HG656 123.00800-1200A (8) #6-350 Kcmil HG678 239.0030-200A with (1) NO & (1) NC contact HA161234 239.00Auxiliary Contacts (HD only) 30-200A with (2) NO & (2) NC contacts HA261234 266.00(two required per switch) 400-1200A with (1) NO & (1) NC contact HA165678 587.00400-1200A with (2) NO & (2) NC contacts HA265678 614.0030A, 240V Kit HR21 83.00Class R Fuse Clip Kits 30A, 600V Kit/60A, 240V Kit HR612 83.00(two required per switch) 60A, 600V Kit HR62 83.00100A Kit HR63 54.00200A Kit HR64 54.00100A, 240V Kit HT23 76.00Class T Fuse Adapter Kits 100A, 600V Kit HT63 120.00(two required per pole) 200A, 240V Kit HT24 102.00200A, 600V Kit HT64 143.00For 3 ⁄4" Conduit ECHS075 39.50For 1" Conduit ECHS100 39.50Type 3R Hubs (30-200A) For 1 1 ⁄4" Conduit ECHS125 39.50For 1 1 ⁄2" Conduit ECHS150 39.50For 2" Conduit ECHS200 69.00For 2 1 ⁄2" Conduit ECHS250 109.00Accessories – 4-Pole and Type “F” & “NF” 3-Pole Switches Only Catalog ListDescription Number Price $Auxiliary Switch(1) NO, (1) NC DS200EK1 373.00(two required per switch)30-800A(2) NO, (2) NC DS200EK2 743.0030-60-100A DS100GK 12.00Ground Lug Kit 200A DS200GK 203.00400-600-800A DS468GK 292.0030-60-100A Use Type HR HubsHubs 200-400A Use Type SSH 4, 4X Hubs600-800A Use Type SSH 4, 4X HubsNeutrals (3-pole only) 30-60-100A DT100NK 195.00200A DT200NK 391.00400 & 600A Fusible DS800NK 488.00400A 3P Non-Fusible DT600NK 432.00Wire Ranges (Line, Loadand Neutral) per NECRequirementsSelection30-200A – 2, 3 & 4-Pole SwitchesSwitch Wire Range (Cu/Al)Ampere New VBII DesignRating Line, Load and Neutral0 30 (1) #14–6060 (1) #14–2100 (1) #14–1/0 AWG100 (1) #14–1/0 AWG200 (1) #6–250 kcmil400-1200A – 2 & 3-Pole SwitchesSwitch Wire Range (Cu/Al)Ampere New VBII DesignRating Line, Load and Neutral400(1) 1/0 AWG–750 kcmil or(2) 1/0 AWG–250 kcmil600 (2) 1/0 AWG–500 kcmil800(2) 1/0 AWG–750 kcmil or(3) 1/0 AWG–500 kcmil1200(3) 1/0 AWG–600 kcmil or(4) 1/0 AWG–500 kcmil400-800A – 4-Pole switchesSwitch Wire Range (Cu/Al)Ampere New VBII DesignRating Line, Load and Neutral400(1) 1/0 AWG–300 kcmil or(2) 1/0 AWG–750 kcmil600 (2) 250-500 Kcmil800 (3) 250-500 KcmilMaximum Horsepower RatingsFusedAmpere1-Phase AC3-Phase AC250VRating 240V 240V 480V 600V DC0 30 03 0 7 1 ⁄2 015 020 050 60 10 15 030 050 10100 15 30 060 075 20200 15 60 125 150 40400 — 125 125 125 50600 — 125 — — 50Non-Fused0 30 05 10 020 030 050 60 10 20 050 060 10100 15 40 075 100 20200 15 60 125 150 40400-800 — 125 250 350 50Replacement Parts – 2 and 3-Pole Switches Only Catalog ListDescription Number Price $Type 1, 3R & 12 Replacement Handle 30-200A HHD61234 98.00Type 4X Replacement Handle 30-200A HHD61234S 174.00Replacement Handle 400-1200A HHD65678 143.00▲ Built to order. Allow 6–8 weeks for delivery. For “DT” VBII Type switches only. Also for fusible stainless & 400A Type 12 & 4x switches. The following ground lugs are provided as standard in200A and larger switches 200-(1) #14-4 Cu/Al400-800A-(3) #6-250MCM Cu/Al. One aux. required for normal and one required foremergency switch line base.3-30Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule HDSS & RESI

Safety SwitchesVBII Design Double Throw Dimensions (Inches)DimensionsEnclosureMountingCatalog Number A B C D E FFigure 1 (30-1200A Type 1 & 3R)DTNF221, DTNF321, DTNF361, DTNF361R 24.50 9.53 6.09 19.00 6.75 0.268DTF321, DTF321R, DTF361 29.12 9.53 6.09 23.50 6.75 0.268DTNF222, DTNF322, DTNF362, DTNF362R 24.88 11.50 6.09 19.00 9.38 0.268DTF322, DTF322R, DTF362 33.45 11.50 6.09 27.50 9.38 0.268DTNF223, DTNF323, DTNF323R, DTNF363, DTNF363R,DTGNF223R, DTGNF223NR, DTGNF323R , DTGNF323NR27.62 12.18 6.09 19.36 8.00 0.268DTF323, DTF323R, DTF363, DTF363R 36.44 12.18 6.09 28.11 8.00 0.268DTNF224, DTNF224R, DTNF324, DTNF324R, DTNF364, DTNF364R,DTGNF224R, DTGNF224NR, DTGNF324R, DTGNF324NR36.00 19.12 6.42 31.00 15.00 0.44DTF224, DTF224R, DTF324, DTF324R, DTF364, DTF364R 49.44 19.12 6.42 44.50 15.00 0.44DTF325, DTF326, DTF365 73.54 28.22 9.44 65.50 16.00 0.56DTNF225, DTNF225R, DTNF325, DTNF365, DTNF365R 57.71 28.22 9.44 49.75 16.00 0.56DTNF326, DTNF366, DTNF366R 57.71 28.22 9.44 49.75 16.00 0.56DTNF327, DTNF367, DTNF367R 71.65 41.60 9.44 63.70 32.00 0.56DTNF368, DTNF368R 71.65 41.60 9.44 63.70 32.00 0.56NFR451DTK , NFR452DTK , NFR453DTK 24.63 11.63 4.78 21.50 9.25 0.25 NF454DTK , NFR454DTK 37.25 19.19 6.32 33.50 16.00 0.56 NF455DTK , NF456DTK , NF457DTK ,NFR455DTK , NFR456DTK , NFR457DTK 63.31 27.00 8.88 58.50 22.25 0.56 Figure 2 (30-200A Type 12 & 4X)3 SAFETYSWITCHESDTNF361J, DTNF361S 24.42 9.65 6.48 26.65 5.47 0.27DTNF362J, DTNF362S 24.80 11.61 6.48 27.03 8.00 0.27DTNF363J, DTNF363S 27.54 12.29 6.48 29.77 8.47 0.27DTNF364J, DTNF364S 35.93 19.24 6.78 38.16 13.44 0.33NF355HDTK , NF355SSDTK 53.82 22.66 7.25 56.20 18.00 0.56F353SSDTK 37.00 11.62 5.50 38.50 9.00 0.26F354SSDTK 50.90 19.16 6.46 53.27 16.12 0.50F355SSDTK 74.50 25.00 8.92 76.69 20.25 0.56EEDC LADC LA(6) “F” dia. mounting holes (30-200A)(4) “F” dia. mounting holes (400-1200A)(6) “F” dia. mounting holes (30-200A)(4) “F” dia. mounting holes (400-1200A)CCBBFigure 1Figure 2Type 1 & 3R Type 4X & 12*For inches / millimeters conversion, multiply inchesby 25.4. (3) Mounting holes supplied (1 at top). (4) Mounting holes provided. These switches are not Type VBII design. Drip hood not shown but provided onType 3R enclosures.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog3-31

Enclosed SwitchesRotary Disconnect Switches in Non-Metallic Enclosures SelectionApplicationSiemens Rotary Disconnect switchesare ideally suited for use as ”in sight“disconnects for motor loads and otherelectrical equipment which is remotelylocated from its branch circuit protectivedevice. All are supplied in non-metallicenclosures which are UL & CUL or CSAapproved for a wide range of bothindoor and outdoor environments. Allmeet UL508 requirements.Siemens Enclosed RotaryDisconnect Switches▪ 16–125A, Non-Fusible▪ 600VAC max. rated (except catalogno. HNF3100CX is rated 480VACmax.)▪ Available in both Type 12 and 4Xnon-metallic enclosures▪ Both screw and hinged coverdesigns available▪ Listed and marked “suitable for useas motor disconnect” per NECSection 430-109▪ Screw cover switches are UL listedunder File No. E47705 and are CSAcertified under File No. 203576▪ IEC 60947-3 rated and CE marked(enclosures are IP65 rated)▪ Hinged door switches are UL listedfor multiple line and load conductorsper phase in 30–100A ratings. Theyare UL & CUL listed under File No.E191706▪ HP rated▪ Rotary handles are available inblack, red, and yellow and in pistolgrip designs▪ 16–63A screw cover switches havefactory installed ground bars. Allhinge cover switches acceptground lug kits▪ Screw cover switches areprovided with knockouts▪ Padlockable in OFF positionwith up to (3) padlocks3SAFETYSWITCHESDescription16–125A non-fusible switches areavailable in non-metallic enclosureswhich are UL approved as Type 12 &4X and for either indoor or outdoor use.All are horsepower and load breakrated. All are panel mounted and areeither supplied with factory installedaux. contacts or will accept contactkits. All are compact in size while providingample wiring space for copperline & load conductors.Catalog NumberHorsepower RatingsAmpere List 3-Pole, 3-Wire with (1) NO List Shipping 240V AC 480V AC 600V ACRating 3-Pole, 3-Wire Price $ & (1) NC Aux. Contact Price $ Weight 1-Phase 3-Phase 3-Phase 3-PhaseNon-Fusible, Type 1, 4X & 12K with Screw Cover and Black Rotary Handle 600V AC Max. 16 3LD2064-0TB51-0US1 313.00 3LD2064-1GP51-0US1 355.00 1 1 1 ⁄2 3 7 1 ⁄2 1025 3LD2164-0TB51-0US1 336.00 3LD2164-1GP51-0US1 378.00 1 3 7 1 ⁄2 10 1530 3LD2264-0TB51-0US1 395.00 3LD2264-1GP51-0US1 437.00 1 3 7 1 ⁄2 15 2030 — — 3LD2264-1TS51-0US1 ▲ 453.00 1 3 7 1 ⁄2 15 2030 — — 3LD2264-2TW51-0US1 ▲ 483.00 1 3 7 1 ⁄2 15 2063 3LD2565-0TB51-0US1 579.00 3LD2565-1GP51-0US1▲ 621.00 3 10 15 40 50100 3LD2766-0TB51-0US1 929.00 3LD2766-1GP51-0US1▲ 1000.00 6 — 30 60 75125 3LD2866-0TB51-0US1 1555.00 3LD2866-1GP51-0US1▲ 1613.00 6 — 40 75 100Non-Fusible, Type 1, 4X & 12K with Screw Cover and Red and Yellow Rotary Handle 600V AC Max. 16 3LD2064-0TB53-0US1 313.00 3LD2064-1GP53-0US1 355.00 1 1 1 ⁄2 3 7 1 ⁄2 1025 3LD2164-0TB53-0US1 336.00 3LD2164-1GP53-0US1 378.00 1 3 7 1 ⁄2 10 1530 3LD2264-0TB53-0US1 395.00 3LD2264-1GP53-0US1 437.00 1 3 7 1 ⁄2 15 2030 — — 3LD2264-1TS53-0US1 ▲ 453.00 1 3 7 1 ⁄2 15 2030 — — 3LD2264-2TW53-0US1 ▲ 483.00 1 3 7 1 ⁄2 15 2063 3LD2565-0TB53-0US1 579.00 3LD2565-1GP53-0US1▲ 621.00 3 10 15 40 50100 3LD2766-0TB53-0US1▲ 929.00 3LD2766-1GP53-0US1▲ 1000.00 6 — 30 60 75125 3LD2866-0TB53-0US1▲ 1555.00 3LD2866-1GP53-0US1▲ 1613.00 6 — 40 75 100Non-Fusible, Type 4X with Hinged Door and Black Pistol Grip Rotary Handle 480V AC Max. 30 HNF3030CX 870.00 — — 4 3 7 1 ⁄2 15 2060 HNF3060CX 1189.00 — — 4 10 15 40 50100 HNF3100CX 1494.00 — — 5 15 25 50 —▲ Built to order. Allow 6–8 weeks for delivery. Carton quantity of (1). Shipping weight in pounds (lbs.). Approved for both indoor and outdoor use. No coverinterlock provided. 30 and 60A switches are also rated 600V AC. Also rated as Type 12 and UL approved for both indoorand outdoor use. Defeatable cover interlock provided. Screw cover enclosures are constructed from Makrolon9425. Hinged cover enclosures are constructed fromfiberglass reinforced polycarbonate. Switch is supplied with (2) NO and no NC aux. contacts. Switch is supplied with (4) NO and no NC aux. contacts.Ground bar is not provided or available. Aux. contacts break about 3 Ms before and make about3 Ms after main switch contacts. 6P, 25A, switch with 1 NO & 1 NC aux. contacts and ablack operating handle is also available. Order catalognumber 3LD2165-4VD51 (Discount Code: Pilot Devices).3-32Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule HDSS

Enclosed SwitchesRotary Disconnect SwitchesEnclosed Disconnect Switch Dimensions (Inches)*Catalog Ampere Fig.DimensionsNumber Rating No. A B C D3LD2064- 16 5.52 3.94 3.19 4.573LD2164- 25 5.52 3.94 3.19 4.573LD2264- 3015.52 3.94 3.19 4.573LD2565- 63 6.93 5.75 4.10 5.873LD2766- 100 11.90 8.35 5.36 7.133LD2866- 125 11.90 8.35 5.36 7.13HNF3030CX 30 7.87 7.87 5.20 7.29HNF3060CX 60 2 11.77 7.87 5.20 7.29HNF3100CX 100 11.77 7.87 5.20 7.29Note: 3LD2 Type switches only have top and bottom end KOs as follows:16-30A - 1/2" & 3/4", 63A - 3/4" & 1", 100 & 25A - 1" & 1 1/4"Figure 1ACDWire ranges 60/75°C Cu Only3LD2 Type Switches 16 Amps (1) #18-10 AWG25–30 Amps (1) #14-10 AWG63 Amps (1) #14-6 AWG100–125 Amps (1) #12-1 AWGHNF Type SwitchesFigure 2Selection(1) #14-#10 AWG Solid(1) #14-#4 AWG StrandedUp to (4) #12 AWG Solid30 Amps Up to (3) #12 AWG StrandedUp to (6) #14 AWG StrandedUp to (4) #14 AWG Strandedwith (1) #10 AWG Stranded(1) #14-#10 AWG Solid(1) #14-#1 AWG Stranded(2) #6 AWG Stranded60 & 100 AmpsUp to (3) #8 AWG StrandedUp to (6) #10 AWG StrandedUp to (6) #12 AWG SolidDC3 SAFETYSWITCHESBUL and CUL Short Circuit Withstand Ratings16RK5(50A Max)Short Circuit Withstand Rating and Fuse ClassWith Line Side FusingWith Load Side Fusing Ampere 5 kA at 10 kA at 18 kA at 5 kA at 18 kA atRating 600V Max 600V Max 480V Max 480V Max 480V Max3LD2 Type Switches — — — —25 & 30 RK5 — — — —(80A Max)RK563— — — —(175A Max)100 &RK5—— — —125 (200A Max)HNF Type Switches30 —FerrazShawmutA50P or lowerH, K & RK5 H, K & RK5let-through(100A Max) (30A Max)semiconductorfusesJ, T & CC(60A Max)(100A Max) FerrazH, K & RK560Shawmut(150A Max)A50P or lowerH, K & RK5let-through(60A Max)semiconductor100 fuses(100A Max) For use as supplemental protection on the load side of the branch circuit over currentprotective device. Ground lug kit has two lugs for #14-4 Cu/Al wire. Factory installed ground lugs supplied as follows: 16-30A #14-10 Cu, 63A #14-8 Cu.Ground lug not provided and is not available on catalog numbers 3LD2264-2TW51-0US1and 3LD2264-2TW53-0US1. 6.38 inches high including mounting feet. 7.85 inches high including mounting feet. 60 & 100A HNF switches are rated 10kA at 480V max. with line side Class H, K & RK5150A max. fuses. Wire range (1) #14-2 AWG 60/75 °C Cu only. 16-63A 3LD switches are also rated 5kA at 600VAC max when protected by a 3RV typeMSP of the same or lesser ampere rating.*For inches / millimeters conversion, multiply inches by 25.4..5IEC Fuse and Withstand RatingsAmpere Rating gG Fuse Size Short Circuit RatingSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogB3LD2 Screw Cover Switches16 20A 5k Arms25 25A 10k Arms32 50A 10k Arms63 63A 15k Arms100 100A 20k Arms125 125A 20k ArmsHNF Hinged Cover Switches30 63A 10k Arms60 100A 10k Arms100 100A 10k ArmsAccessoriesSwitchAmpere Catalog ListRating Number Price $ Description3LD2 Type Switches (Discount Schedule PILO)16–30A 3LD9220-2C 23.00 Neutral Kit63A 3LD9250-2CA 32.00 Neutral Kit100–125A 3LD9280-2C 39.50 Neutral KitHNF Type Switches (Discount Schedule HDSS)30–100A GSGK60 24.00 Ground Lug Kit 30A LBRA1 59.00 Auxiliary Contact Kit (1 NO-1 NC)60–100A LBRA2 65.00 Auxiliary Contact Kit (1 NO-1 NC)30–100A HF63CX 76.00 Neutral KitA3-33

Enclosed SwitchesEnclosed Bolted Pressure Switches & Safety Switch Replacement PartsFor enclosed bolted pressure contact switches order as lug-in/lug-out single sectionBPS main switchboards using the SPACE 2000 Switchboard EPM.SelectionVBII Safety Switch Replacement PartsLine Load Handle / Handle GuardBase Base General Duty Heavy DutyAmpere Catalog List Catalog List Catalog List Catalog ListRating Number Price $ Number Price $ Number Price $ Number Price $Fusible 2- and 3-Pole 60-600A General Duty & 30-1200A Heavy Duty 3SAFETYSWITCHES30 HD 240V HFB21 84.00 HBB21 56.00 — — HH6123 62.0060 GD HFB612 137.00 HBB612 81.00 GH223 51.00 — —60 HD 240V HFB22 141.00 HBB22 83.00 — — HH6123 62.0030 600V HFB612 137.00 HBB612 81.00 — — HH6123 62.0060 600V HFB62 169.00 HBB62 97.00 — — HH6123 62.00100 HFB63 208.00 HBB63 176.00 — — HH6123 62.00200 HFB64 447.00 HBB64 256.00 — — HH64 87.00400 HFB65 393.00 HBB656 225.00 — — HH65678 137.00600 HFB66 393.00 HBB656 225.00 HH65678 137.00 HH65678 137.00800 HFB67A 863.00 HBB67A 473.00 — — HH65678 137.001200 HFB68 1063.00 HBB68 691.00 — — HH68 131.00Non-Fusible 3-Pole 60-600A General Duty & 30-1200A Heavy Duty 30 HD HNB612 77.00 — — — — HH6123 62.0060 GD HNB612 77.00 — — GH223 51.00 — —60 HD HNB623 313.00 — — — — HH6123 62.00100 HNB623 313.00 — — GH223 51.00 HH6123 62.00200 HNB64 327.00 — — GH24 61.00 HH64 87.00400 HNB65 313.00 — — HH65678 137.00 HH65678 137.00600 HNB66 313.00 — — HH65678 137.00 HH65678 137.00800 HNB67A 866.00 — — — — HH65678 137.001200 HNB678 1056.00 — — — — HH68 131.00Mechanism Assembly Line & Load LugsAmpere Catalog List Catalog ListRating Number Price $ Number Price $Fusible 2- and 3-Pole 60-600A General Duty & 30-1200A Heavy Duty 30 HD 240V HM6123 72.00 HL612 38.5060 GD HM6123 72.00 HL612 38.5060 HD 240V HM6123 72.00 HL612 38.5030 600V HM6123 72.00 HL612 38.5060 600V HM6123 72.00 HL612 38.50100 HM6123 72.00 HL63 97.00200 HM64 190.00 HL64 165.00400 HM65 327.00 HL65678 37.50600 HM66 471.00 HL65678 37.50800 HM67A 761.00 HL67A 109.001200 HM678 1314.00—Non-Fusible 3-Pole 60-600A General Duty & 30-1200A Heavy Duty 30 HD HM6123 72.00 HL612 38.5060 GD HM6123 72.00 HL612 38.5060 HD HM6123 72.00 HL612 38.50100 HM6123 72.00 HL63 97.00200 HM64 190.00 HL64 165.00400 HM65 327.00 HL65678 37.50600 HM66 471.00 HL65678 37.50800 HM67A 761.00 HL67A 109.001200 HM678 1314.00— Three lugs included in kit. Includes lugs. Lugs not included. One lug per kit. One per switch required unless otherwise noted. One required per pole. For type 4/4X stainless steel switches add “S” to end ofcatalog number. For replacement door for heavy duty switches add“DOOR” to end of switch catalog number. Lugs included with line and load bases.3-34Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule HDSS

4SPEEDFAX TM 2007-2008 Disconnect SwitchesContentsCompact Non-Fusible SwitchesRotary and Toggle Switch—Selection 4-2 – 4-4Dimensions and Wire Ranges 4-5Type VBII (30-600A)Features and Ordering Information 4-6Switch and Handle Selection 4-7Accessories 4-8 – 4-9Dimensions and Lug Wire Ranges 4-10Type MCS (30-200A)Switches, Fuse, and No Fuse Kit—Selection 4-11Handle Operators and Accessories 4-12Type CFS Compact Fusible SwitchesFeatures and Ordering Information 4-13Switch and Handle—Selection 4-14Accessories 4-15Dimensions and Technical Characteristics 4-16Type VB Panelboard UnitsGeneral and Withstand Ratings 4-17Catalog Numbering System 4-18Vacu-Break Fusible Units—Selection 4-19 – 4-20Accessories 4-21Type HCP Switchboard UnitsSelection/Accessories 4-22Dimensions 4-23Type TFP Fusible Pullouts—Selection/Dimensions 4-244 DISCONNECTSWITCHESResidential Commercial Industrial

4DISCONNECTSWITCHESDisconnect SwitchesCompact Non-Fusible — Rotary and ToggleFeatures▪ 25 -100 Ampere, to 50 hp 480V and 600V▪ Rotary and Toggle actuation models▪ LBR Type switches are UL & CUL listedunder File No. E191706 as manual motorcontrollers per UL Standard UL508▪ 3LD2 Type switches are UL listedunder File No. E47705 per UL508 andare CSA certified under File No. 203576▪ Base, 35mm DIN-rail and door mounting▪ Multiple conductor, distribution terminaltype rating LBR & LBT Type (40A -100Aonly)▪ IEC 947-1 rated, CE marked▪ Listed and marked “suitable as motordisconnect” per NEC Section 430-109ApplicationSiemens Load Break Switches are listedas manual motor controllers and aresuitable as motor disconnects. They areload break rated and act as enclosuredisconnects when short circuit protectionis provided upstream of the switch. Ifupstream over current protection is notprovided, use a Siemens fusible TypeVBII, CFS or MCS Disconnect Switch.Ordering InformationDoor Mounted Switches (RotaryType Only) — Order either complete“3LD2” assemblies or individual “LBR”components as follows:Complete Assemblies include switch,handle, and shaft. Certain 25 and 32Aassemblies are also available with factoryinstalled neutral blocks and/or aux.contacts. These accessories can alsobe ordered as field installed kits.Individual Components are ordered asfollows:25A — LBR3025D switch + LBRH3 or 4handle.40–100A — LBR switch + LBRH3 or 4handle + LBRD1.Notes: (LBR Type switches only)1. Aux contacts are available as fieldinstalled kits on 25A units only.2. Lugs on 25A units face to the rear andlugs on 40–100A units face toward thefront.Type LBR Rotary Switches3LD2254-0TK51Base/DIN Rail Mounted Switches(Rotary or Toggle Type) — Ordereither complete assemblies or individualcomponents as follows:Complete Assemblies include switch,handle, and shaft.Individual Components are ordered asfollows:Toggle — Order the LBT switch requiredand a toggle switch cover plate ifneeded.Rotary, Base Mounted with DoorMounted Handle — Order “LBR” switch+ door mounted handle + shaft + anyaccessories.Rotary, Base Mounted with DirectMounted Handle — Order “LBR” switch+ direct mounted handle.3LD Type Door Mounted Complete Assemblies(Operator, Shaft, & Switch) 600V AC Max. Type LBT Toggle SwitchesSelectionShort Circuit Withstand RatingsSwitch Rating& Type Max. Line Side Fuse Rating5kA with Line Side Class H, K, orRK5 Fuses25 & 32A 3LD2 80A Max. at 600V AC Max.63A 3LD2 175A Max. at 600V AC Max.10kA with Line Side Class H, K, orRK5 Fuses25A LBR 30A Max. at 480V AC Max.40A, 4PLBR & LBT60A Max. at 480V AC Max.40 & 60A, 3PLBR & LBT100A Max. at 480V AC Max.80 & 100ALBR & LBT150A Max. at 480V AC Max.18kA with Line Side Class J, T, orCC Fuses40–100A, 3P100A Max. at 480V AC Max.LBR & LBTNote: 3LD2 switches are also rated 5kA at 600V ACMax. when protected by a 3RV motor starter with aFLA rating equal to or less than the switch ampererating.Shaft Mounted 4 Hole Mounted AC Horsepower RatingsCatalog List Catalog List Number Ampere 120V 240V 480V 600VNumber Price $ Number Price $ of Poles Rating 1Ø 1Ø 3Ø 3Ø 3Ø3LD2154-0TK__ 81.00 3LD2103-0TK__ 81.00 33LD2154-1TP__ 106.00 3LD2103-1TP__ 106.00 3 3LD2154-1TL__ 101.00 3LD2103-1TL__ 101.00 3 + N25 2 3 7 1 / 2 10 153LD2154-2EP__ 123.00 3LD2103-2EP__ 123.00 3 + N 3LD2254-0TK__ 96.00 3LD2203-0TK__ 90.00 33LD2254-1TL__ 118.00 3LD2203-1TL__ 122.00 3 + N32 2 3 10 20 203LD2555-0TK__ 155.00 3LD2504-0TK__ 155.00 3 63 — 10 15 40 50— — 3LD2504-3VK53 224.00 6 63 — 10 15 40 50— — 3LD2704-0TK__ 235.00 3 100 — — 30 60 75— — 3LD2804-0TK__ 300.00 3 125 — — 40 75 100 Built to order. Allow 6–8 weeks for delivery. Includes auxiliary contacts (1 NO and 1 NC). Handles are IP65 rated and are also UL listed for Type 1, 4Xand 12 applications. Add 51 for a black handle or 53 for a red & yellow handleto the end of the catalog number.4-2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PILO

Disconnect SwitchesCompact Non-Fusible — Rotary and Toggle3LD Type Base Mounted Complete Assemblies(Operator, Shaft, & Switch) 600V AC Max.Handle Mounting Shaft (center hole) 4 Hole AC Horsepower RatingsCatalog List Catalog List Number Ampere 120V 240V 480V 600VNumber Price $ Number Price $ of Poles Rating 1Ø 1Ø 3Ø 3Ø 3Ø3LD2144-0TK__ 138.00 3LD2113-0TK__ 132.00 33LD2144-1TL__ 154.00 3LD2113-1TL__ 149.00 3 + N25 2 3 7 1 / 2 10 153LD2244-0TK__ 154.00 3LD2213-0TK__ 144.00 33LD2244-1TL53 138.00 3LD2213-1TL53 165.00 3 + N32 2 3 10 20 203LD2545-0TK__ 207.00 3LD2514-0TK__ 171.00 3 63 — 10 15 40 50— — 3LD2714-0TK__ 282.00 3 100 — — 30 60 75— — 3LD2814-0TK__ 352.00 3 125 — — 40 75 100SelectionNote: Shaft length allows a maximum depth from switch mounting surface to the outside of the cover of 15.25" on 25 &32A switches and of 15.75" on 63-125A switches.Accessories for Front Mounted 3LD2 SwitchesCatalog Switches ListNumber Description Used With Price $3LD9200-5B 1 NO, 1 NC Aux. Contact 25-125A 33.003LD9200-5BF 1 NO, 1 NC Aux. with Gold Plated Contacts 25-125A 57.003LD9220-2B Neutral/Ground Terminal 25 & 32A 23.003LD9250-2BA Neutral/Ground Terminal 63A 32.003LD9280-2B Neutral/Ground Terminal 100 & 125A 39.503LD9220-0B 4th Pole (leading ON, lagging OFF) 25 & 32A 28.503LD9250-0BA 4th Pole (leading ON, lagging OFF) 63A 46.503LD9280-0B 4th Pole (leading ON, lagging OFF) 100 & 125A 57.003LD9224-1B Black Handle (4 hole mtg.) 25 & 32A 15.003LD9284-1B Black Handle (4 hole mtg.) 63-125A 39.503LD9224-3B Red/Yellow Handle (4 hole mtg.) 25 & 32A 15.003LD9284-3B Red/Yellow Handle (4 hole mtg.) 63-125A 39.503LD9224-1D Black Handle (shaft mtg.) 25 & 32A 15.003LD9284-1D Black Handle (shaft mtg.) 63-125A 39.503LD9224-3D Red/Yellow Handle (shaft mtg.) 25 & 32A 15.003LD9284-3D Red/Yellow Handle (shaft mtg.) 63-125A 39.503LD9221-2A Terminal Cover 1P (Pack of 4) 25 & 32A 3.003LD9251-2A Terminal Cover 1P (Pack of 4) 63A 3.003LD9281-2A Terminal Cover 1P (Pack of 4) 100-125A 4.603LD9221-0A Terminal Cover 3P (Pack of 4) 25 & 32A 9.003LD9251-0A Terminal Cover 3P (Pack of 4) 63A 10.603LD2213-0TK533LD9220-2C4 DISCONNECTSWITCHESAccessories for Base Mounted 3LD2 SwitchesCatalog Switches ListNumber Description Used With Price $3LD9200-5C 1 NO, 1 NC Aux. Contact 25-125A 33.003LD9200-5CF 1 NO, 1 NC Aux. with Gold Plated Contacts 25-125A 57.003LD9220-2C Neutral/Ground Terminal 25 & 32A 23.003LD9250-2CA Neutral/Ground Terminal 63A 32.003LD9280-2C Neutral/Ground Terminal 100 & 125A 39.503LD9220-0C 4th Pole (leading ON, lagging OFF) 25 & 32A 28.503LD9250-0CA 4th Pole (leading ON, lagging OFF) 63A 46.503LD9280-0C 4th Pole (leading ON, lagging OFF) 100 & 125A 57.003LD9224-1B Black Handle (4 hole mtg.) 25 & 32A 15.003LD9284-1B Black Handle (4 hole mtg.) 63-125A 39.503LD9224-3B Red/Yellow Handle (4 hole mtg.) 25 & 32A 15.003LD9284-3B Red/Yellow Handle (4 hole mtg.) 63-125A 39.503LD9224-1D Black Handle (shaft mtg.) 25 & 32A 15.003LD9284-1D Black Handle (shaft mtg.) 63-125A 39.503LD9224-3D Red/Yellow Handle (shaft mtg.) 25 & 32A 15.003LD9284-3D Red/Yellow Handle (shaft mtg.) 63-125A 39.503LD9221-2A Terminal Cover 1P (Pack of 4) 25 & 32A 3.003LD9251-2A Terminal Cover 1P (Pack of 4) 63A 3.003LD9281-2A Terminal Cover 1P (Pack of 4) 100-125A 4.603LD9221-0A Terminal Cover 3P (Pack of 4) 25 & 32A 9.003LD9251-0A Terminal Cover 3P (Pack of 4) 63A 10.603LD9251-0A Handles and line side terminal covers are supplied asstandard with 3LD2 switches. Add suffix 51 for a black handle or 53 for a red & yellowhandle to the catalog number. Handles are 1P65 rated andare also UL listed for Type 1, 4X & 12 applications. Add 51 for a black handle or 53 for a red & yellow handle tothe end of the catalog number. Aux. contacts break about 30 Ms before and make about 3Ms after main switch contacts.Ratings 10A at 120V AC6Aat 240V AC1.4A at 480V ACDiscount Schedule PILOSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog4-3

4DISCONNECTSWITCHESDisconnect SwitchesCompact Non-Fusible — Rotary and ToggleIndividual ComponentsRotary and Toggle SwitchesMaxAC Horsepower RatingsCatalog Switch No. of Ampere AC 115V 240V 480V 600V ListNumber Type Poles Rating Volt 1Ø 1Ø 3Ø 3Ø 3Ø Price $LBR3025 Rotary 3 25 480 3⁄4 2 5 10 — 99.00LBR3025D Rotary 3 25 480 3⁄4 2 5 10 — 108.00LBR3040 Rotary 3 40 600 2 3 7 1 ⁄2 20 25 118.00LBR3060 Rotary 3 60 480 2 5 10 25 — 141.00LBR3080 Rotary 3 80 600 3 10 20 40 50 169.00LBR3100 Rotary 3 100 480 5 15 25 50 — 208.00LBR4040 Rotary 4 40 480 2 3 7 1 ⁄2 20 — 184.00LBT3040 Toggle 3 40 600 2 3 7 1 ⁄2 20 25 118.00LBT3060 Toggle 3 60 480 2 5 10 25 — 141.00LBT3080 Toggle 3 80 600 3 10 20 40 50 169.00LBT3100 Toggle 3 100 480 5 15 25 50 — 208.00LBT4040 Toggle 4 40 480 2 3 7 1 ⁄2 20 — 184.00Standard Duty RotarySwitch Door HandlesSelectionHeavy Duty RotarySwitch Door HandleLBR Type HandlesCoverCatalog Used on NEMA Interlock ListNumber Rotary Switches Type Mounting Marking Color Supplied Padlockable Price $Standard DutyLBRH2 All 1 Door ON/OFF Black No No 34.50LBRH3 All 1, 3R, 12, 4X Door O/I, ON/OFF Black Yes Yes 51.00LBRH4 All 1, 3R, 12, 4X Door O/I, ON/OFF Red/Yel Yes Yes 51.00LBRH9 All (Pistol Grip Type) 1, 3R, 12, 4X Door O/I, ON/OFF Black Yes Yes 130.00LBRH10 All (Pistol Grip Type) 1, 3R, 12, 4X Door O/I, ON/OFF Red/Yel Yes Yes 130.00LBRH5 25 Amps 1 Direct Mount O/I Black — Yes 16.10LBRH6 3-Pole, 40-60 Amps 1 Direct Mount O/I Black — Yes 21.00LBRH7 3-Pole, 80-100 Amps 1 Direct Mount O/I Black — Yes 21.00LBRH8 4-Pole, 40-60 Amps 1 Direct Mount O/I Black — Yes 21.00Heavy DutyCFSH10B12 All 1, 3R, 12 Door O/I, ON/OFF Black Yes Yes 137.00CFSH10R12 All 1, 3R, 12 Door O/I, ON/OFF Red/Yel Yes Yes 137.00LBR Type Rotary ShaftsCatalog No Length In. (mm) List Price $For Standard Duty HandlesLBRS040 1.57 (40) 16.10LBRS050 1.97 (50) 21.00LBRS055 2.17 (55) 21.00LBRS080 3.15 (80) 24.00LBRS120 4.72 (120) 27.00LBRS180 7.09 (180) 31.50LBRS305 12.00 (305) 34.50For Heavy Duty HandlesCFSS5200H 7.9 (200) 34.00CFSS5400H 15.7 (400) 36.00LBR 25 Amp, 4th PoleUsed on Catalog No Catalog No List Price $LBR3025 LBRP25 68.00LBR3025D LBRP25D 76.00LBR Auxiliary Switch KitsRotary ShaftsUsed on Catalog ListRotary Switch Number Contact Arrangement Price $LBR3025 LBRA25 1 NO/1 NC 51.00LBR3025D LBRA25D 1 NO/1 NC 51.00LBR3040,LBR3060LBRA1 1 NO/1 NCwith common point 59.00LBR3080,LBR3100LBRA2 1 NO/1 NCwith common point 65.00Rotary Switch DirectMount HandlesToggle Switch CoverPlatesLBT Type Toggle Switch Cover PlateUsed onListToggle Switches Catalog Number Price $LBT3040, LBT3060 LBTCP1 25.50LBT3080, LBT3100 LBTCP2 27.00LBT4040 LBTCP3 30.50LBR Type Rotary Switch Door Mounting Kit(For use with LBRH3 & LBRH4 only)Used onListRotary Switch Catalog Number Price $40-100 Amps LBRD1 59.00LBR/LBT Neutral Kit Used withListCatalog Number Catalog Number Price $All HF63CX 76.00 No cover interlock defeat mechanism provided. Toeliminate cover interlock, order additional catalognumber LBRDC1. LBRH2 is IP54 rated. All others are IP65. Ratings15.1A resistive at 250V AC max..5A at 125V DC.25A at 250V DC.5 HP at 250V AC max. Auxiliary switch contacts break about 30 Ms before andmake about 3 Ms after main switch contacts. Cannot beused with LBRD1 door mounting kit. Lug wire ranges:HF63CX —(1) #14-2 AWG 60/75°C Cu only Only door mountable and for use with LBRH3 &4 handles only. For door mounting of 40–100A LBR switches usedoor mounting kit LBRD1 & LBRH3 or 4 handle.4-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule HDSS

Disconnect SwitchesCompact Non-Fusible — Rotary and ToggleDimension Drawings and Wire RangesDimensions2.92 in.(74 mm)LBR 30250.87 in.(22 mm)1.42 in.(36 mm)3.15 in.(80 mm)1.38 in.(35 mm)0.20 in.(5 mm)Wire Ranges 60/75°C Cu only25 Amps LBR40 & 60 AmpsLBR & LBT1.54 in.(39 mm)(1) #14 - #10 AWG Solid(1) #14 - #8 AWG Stranded(1) #14 - #10 AWG Solid(1) #14 - #4 AWG StrandedUP to (4) #12 AWG SolidUp to (3) #12 AWG StrandedUp to (6) #14 AWG StrandedUp to (4) #14 AWG Strandedwith (1) #10 AWG Stranded(1) #14 - #10 AWG Solid(1) #14 - #1 AWG Stranded80 & 100 Amps (2) #6 AWG StrandedLBR & LBTUp to (3) #8 AWG StrandedUp to (6) #10 AWG StrandedUp to (6) #12 AWG Solid25A, 3LD21 (1) #14-8 AWG32A, 3LD22 (1) #14-8 AWG63A, 3LD25 (1) #14-6 AWG100, 125A, 3LD2 (1) #12-1 AWG2.24 in.(57 mm)2.76 in.(70 mm)0.71 in.(18 mm)3.35 in.(85 mm)Minimum Depth1.77 in.(45 mm)DrillingPattern.125(3.2).877(22.5).95(24.1)Shaft Mounted3LD2 Handle CutoutDimension J Minimum Depth SwitchDimension JLBR 40-100A 3.35 (85)3LD2 25 & 32A Front Shaft Mounted 3.07 (78)3LD2 63 Front Shaft Mounted 3.35 (85)3LD2 25 &32A Front 4-hole Mounted 2.13 (54)3LD2 63A Front 4-hole Mounted 2.48 (63)3LD2 100 & 125A Front 4-hole Mounted 2.56 (65)3LD2 25 & 32A Base w/shaft Mtg. Handle 6.46 (164)3LD2 63A Base w/shaft Mtg. Handle 6.77 (172)3LD2 25 & 32A Base w/4-hole Mtg. Handle 5.59 (142)3LD2 63A Base w/4-hole Mtg. Handle 5.99 (152)3LD2 100 & 125A Base w/hole Mtg. Handle 6.07 (154)FEC0.31 in.(8 mm)JLBR 40-100 Amps & 3LD2 25-125A3.00 in.(76 mm)Minimum DepthFEC0.31 in.(8 mm)BBADAD0.16 in.(4 mm)0.16 in.(4 mm)GHGH4 DISCONNECTSWITCHESLBT Toggle — 40-100 AmpsSwitchSwitchDimensions Inches (mm)Type Catalog Number A B C D E F G HRotary LBR3040 2.00 (51) 2.72 (69) 2.72 (69) 1.78 (45) 2.16 (55) 1.67 (42) 1.50 (38) 1.22 (31)Rotary LBR3060 2.00 (51) 2.72 (69) 2.72 (69) 1.78 (45) 2.16 (55) 1.67 (42) 1.50 (38) 1.22 (31)Rotary LBR3080 2.09 (53) 3.32 (84) 2.92 (74) 1.97 (50) 2.29 (58) 1.69 (42) 1.66 (42) 1.66 (42)Rotary LBR3100 2.09 (53) 3.32 (84) 2.92 (74) 1.97 (50) 2.29 (58) 1.69 (42) 1.66 (42) 1.66 (42)Rotary LBR4040 2.42 (61) 2.72 (69) 2.72 (69) 2.28 (58) 2.16 (55) 1.67 (42) 1.50 (38) 1.22 (31)Rotary Front Mtg. 3LD21 & 2 1.81 (46) 2.17 (55) 1.97 (50) — — — — —Rotary Front Mtg. 3LD25 2.36 (60) 2.52 (64) 2.32 (59) — — — — —Rotary Front Mtg. 3LD27 & 8 2.40 (61) 3.27 (83) 2.40 (61) — — — — —Rotary Base Mtg. 3LD21 & 2 1.81 (46) 2.17 (55) 2.29 (58) — — — — —Rotary Base Mtg. 3LD25 2.36 (60) 2.52 (64) 2.68 (68) — — — — —Rotary Base Mtg. 3LD27 & 8 2.80 (71) 3.27 (83) 2.76 (70) — — — — —Toggle LBT3040 2.00 (51) 2.72 (69) 2.75 (70) 1.78 (45) 2.16 (55) 1.67 (42) 1.50 (38) 1.22 (31)Toggle LBT3060 2.00 (51) 2.72 (69) 2.75 (70) 1.78 (45) 2.16 (55) 1.67 (42) 1.50 (38) 1.22 (31)Toggle LBT3080 2.09 (53) 3.32 (84) 2.90 (74) 1.97 (50) 2.29 (58) 1.69 (42) 1.66 (42) 1.66 (42)Toggle LBT3100 2.09 (53) 3.32 (84) 2.90 (74) 1.97 (50) 2.29 (58) 1.69 (42) 1.66 (42) 1.66 (42)Toggle LBT4040 2.42 (61) 2.72 (69) 2.75 (70) 2.28 (58) 2.16 (55) 1.67 (42) 1.50 (38) 1.22 (31) Depth from outside of cover to back of switch. Handle front plate dimensions:3LD21 & 2—2.64 inches square3LD25, 7 & 8—3.55 inches squareSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog4-5

Disconnect SwitchesType VBII (30-600A) with Flange Mounted Operating HandleFeatures▪ 30-600A, 600VAC and DC ratings▪ UL Recognized (file # E121152 vol. 3)and CSA Certified under file number154852▪ Visible blade quick make and breakswitching action▪ Panel and Flange mounted assembliesfacilite installation▪ Panel mounted switches are variabledepth▪ Short circuit rating of 10,000 AIC withclass H fuse, and of 200,000 AIC withclass R or J fuses▪ Flange mounted handles are Type 1and 12 rated and padlockable in the offposition with up to (3) padlocks with5/16 hasps ▪ Meets UL98 requirements and suitablefor both main and branch circuit applicationsFeatures and Ordering Information▪ A complete line of aux contacts areavailable▪ Load break and horsepower rated▪ Defeatable cover interlock standardwith all handles▪ Meets NFPA79 requirementsDISCONNECTSWITCHES4VBFS361, VBLK1 & VBH1VBFS363FVBNFS365, VBLK4 & VBH2Ordering Information1. Determine the ratings required (amps,volts, HP, Fusible, NF), the mountingneeded (Panel or Flange), and selectthe appropriate switch.2. For panel mounted switches with arigid operating shaft (30-600A), orderpanel mounted switch flange mountedoperating handle & rigid linkage kitbased on depth required.3. For panel mounted switches with aMax-Flex operator, order panel mountedswitch, Max-Flex Handle & AdapterKit and drive cable.4. Select accessories if required. 30-200A handles are also rated Type 3R & 4X.4-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Disconnect SwitchesType VBII (30-600A) with Flange Mounted Operating HandleSwitchesSelectionHorsepower Rating, Switches and 3-Phase Switch Max. AC600Ampere Voltage Catalog240 Volts AC 480 Volts AC 600 Volts ACVolts DC ListRating Rating Number Standard Max. Standard Max. Standard Max. (max) Price $Fusible Panel Mounted Variable Depth Switches - 3-Pole 30 240 VBFS321 3 7 1/2 — — — — — 582.0060 240 VBFS322 7 1/2 15 — — — — — 670.0030 600 VBFS361 — — 5 15 7 1/2 20 15 605.0060 600 VBFS362 — — 15 30 15 50 30 710.00100 600 VBFS363 — — 25 60 30 75 50 1327.00200 600 VBFS364 — — 50 125 60 150 50 2446.00400 600 VBFS365 — — 100 250 125 350 50 4649.00600 600 VBFS366 — — 150 400 200 500 50 7098.00Non-fusible Panel Mounted Variable Depth Switches - 3-Pole 30 600 VBNFS361 — 10 — 20 — 30 15 529.0060 600 VBNFS362 — 20 — 50 — 60 30 605.00100 600 VBNFS363 — 40 — 75 — 100 50 1074.00200 600 VBNFS364 — 60 — 125 — 150 50 1813.00400 600 VBNFS365 — 125 — 250 — 300 50 3446.00600 600 VBNFS366 — 200 — 400 — 500 50 5261.00Fusible Flange Mounted Switches - 3-Pole 30 240 VBFS321F 3 7 1/2 — — — — — 851.0060 240 VBFS322F 7 1/2 15 — — — — — 940.0030 600 VBFS361F — — 5 15 7 1/2 20 15 875.0060 600 VBFS362F — — 15 30 15 50 30 981.00100 600 VBFS363F — — 50 60 30 75 50 1597.00200 600 VBFS364F — — 100 125 60 150 50 2718.00Non-fusible Flange Mounted Switches - 3-Pole 30 600 VBNFS361F — 10 — 20 — 30 15 798.0060 600 VBNFS362F — 20 — 50 — 60 30 875.00100 600 VBNFS363F — 40 — 75 — 100 50 1344.00200 600 VBNFS364F — 60 — 125 — 150 50 2084.00Note: Fusible switches include fuse provisions for Class H Fuses. The load base can be moved to pre-drilled holes for Class J Fuses. If Class R Fuses are required adda Class R Fuse Clip Kit.4 DISCONNECTSWITCHESFlange Mounted Operating HandlesFor use with Panel Mounted Switches. Included with FlangeMounted Switches as standard.Catalog Handle Assembly ListNumber Description Price $VBH1 30-200A Type 1, 3R & 12 240.00VBH14X 30-200A Type 4X 399.00VBH2 400 Type 1 & 12 476.00VBH2R 400 & 600A Type 1, 3R & 12 560.00VBH24X 400 & 600A Type 4X 760.00Cable KitFor use with 30-200A panel mounted switches and Max-Flexhandle and adapter kit.CatalogListNumber Description Price $FHOEC036 36" long drive cable 153.00FHOEC048 48" long drive cable 182.00Rigid Linkage KitsFor use with Panel Mounted Switches. Not required for FlangeMounted Switches.SwitchCatalog Ampere Enclosure Depth ListNumber Rating Min Max. Price $VBLK1 30-200 6.94 6.94 29.50VBLK2 30-200 6.94 19.0 35.00VBLK3 400 & 600 9.00 8.75 46.50VBLK4 400 & 600 9.00 19.0 54.00Max-Flex TM Handle and Adapter Kit(Type 1, 12, 3R & 4X)Use with 30-200A panel mounted switches and cable kit.CatalogListNumber Description Price $VBHM1 30-200A Max-Flex Adapter Kit 424.00VBNFS361, VBHM1 & FHOEC036 Rated 5 HP at 250V DC. Rated 10 HP at 250V DC. 600V DC & 600V DC horsepower rating shown requires(2) poles to be connected in series. Std. - applies when non-time delay fuses are used.Max. - applies when time delay fuses are used. Includes line base, load base, operating mechanismand line and load lugs. Order operating handle andlinkage kits from tables on this page. Includes line base, load base, operating mechanismline and load lugs operating handle and requiredlinkage. Dimensions (min. & max.) from enclosure mountingpan to outside surface of enclosure handle mountingflange. 7.12 for 200A switches.Discount Schedule HDSSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog4-7

Disconnect SwitchesType VBII (30-600A) with Flange Mounted Operating HandleAccessoriesHR612HT63HN6124DISCONNECTSWITCHESClass R Fuse Clip KitsThese kits prevent the installation ofClass H and K fuses (one kit required perswitch).Class R Fuse Clip KitsCatalog ListNumber Price $ DescriptionHR21 83.00 30A, 240V Kit (HD only)HR612 83.00 30A, 600V Kit/60A, 240V KitHR62 83.00 60A, 600V KitHR63 54.00 100A KitHR64 54.00 200A KitHR656 137.00 400A/600A KitClass T Fuse Adapter Kits100-600A fusible switches are fieldconvertible to accept Class T fuses.400-600A switches are field convertibleto accept Class T fuses by moving theload base to a pre-drilled T fuseposition.Class T Fuse Adapter Kits Catalog ListNumber Price $ DescriptionHT23 76.00 100A, 240V KitHT63 120.00 100A, 600V KitHT24 102.00 200A, 240V KitHT64▲ 143.00 200A, 600V Kit200% Neutral KitsUL listed 200% Neutrals are available on60 & 100A switches. They are typicallyused with non-linear transformers orwhere increased neutral ampacity/lugcapacity is required.200% Neutral KitsSwitch Kit Wire RangeAmpere Catalog List Line & LoadRating Number Price $ Lugs (Cu/Al)100 HN263 225.00 (2) #14-1/0 AWGClass J Fuse ProvisionsAll 30-600A, 600V fusible switches arefield convertible to accept Class J fusesby moving the load base to a pre-drilledJ fuse position.Internal Door Latch KitsFor use with enclosures with doormounted latching bar. Required when aflange mounted switch is mounted in aHoffmann or Rittal enclosure providedwith an AB cutout.CatalogListNumber Description Price $DKR22 point (for use withenclosures less than 40" high)338.003 point (for use withDKR3 enclosures 40" or larger 377.00in height)Neutral KitsStandard Neutral Kits can be fieldinstalled in 30-100A switches.Neutral KitsSwitchKit CatalogAmpere Rating Number List Price $30A 600V, 60A 240V HN612 97.0060A, 600V & 100A HN623 186.00Window Kits (Type 1, 12, 3R and 4x)Allows viewing of visible blades and ofindicating fuses through 200A.CatalogListNumber Description Price $VBWK1 30A Window Kit 109.00VBWK2 60 & 100A Window Kit 118.00VBWK3 200-600A Window Kit 123.00▲ Built to order. Allow 6–8 weeks for delivery. One kit per pole required.4-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule HDSS

Disconnect SwitchesType VBII (30-600A) with Flange Mounted Operating HandleHA161234HA261234HP61Auxiliary ContactsAccessoriesThe auxiliary contacts are available in 1 normally open and 1 normally closedor 2 normally open and 2 normally closed configurations. Siemens offers aPLC Auxiliary Switch (30-200A) that has very low resistance for low voltageand current typical in PLC circuits. All auxiliary contacts make after and breakbefore main switch contacts.Switch Aux. SwitchKit Ampere RatingKit Horsepower RatingAmpere Catalog List 125V AC 250V AC 28V DC 125V AC 250V AC 28V DCRating Number Price $ Max. Max. Max. Max. Max. Max.With 1 NO & 1 NC Isolated Contacts30-200 HA161234 239.00 10 10 — 1/2 3/4 —400-600 HA165678 587.00 10 10 — 1/2 3/4 —With 2 NO & 2 NC Isolated Contacts30-200 HA261234 266.00 10 10 7 1/2 3/4 —400-600 HA265678 614.00 10 10 7 1/2 3/4 —Low Current PLC Type with 1 NO & 1 NC Gold Plated Contacts30-200 HA361234 302.00 10 10 — 1/2 3/4 —400-600 HA365678 643.00 10 10 — 1/2 3/4 —Fuse Puller KitsFuse Puller Kits are field installable in 30-100A Type VBII Heavy DutySwitches (one kit required per 3-pole switch).SwitchAmpere Fuse Puller KitRating Catalog Number List Price $030 HP61 21.00060 HP62▲ 21.00100 HP63▲ 21.004 DISCONNECTSWITCHESCopper Lug KitsAll switches are UL approved to accept field installed copper lug kits.Switch Copper LugAmpere Catalog ListRating Number Price $ Description30–60 HLC612 138.00 (9) Lugs/Kit #14-4 AWG Cu100 HLC63▲ 172.00 (9) Lugs/Kit #14-1/0 AWG Cu200 HLC64▲ 212.00 (9) Lugs/Kit #6 AWG-300 Kcmil Cu400–600A HLC65678 37.50 (1) Lugs/Kit #1/0 AWG-600 Kcmil CuEquipment Ground KitsEquipment Ground Lug Kits are available for all switches.HLC612SwitchAmpere Catalog List Number of Wire RangeRating Number Price $ Terminals Per Terminal (Cu/Al)30–200 HG61234 24.00 2 #14-4 AWG400 & 600 HG656 123.00 4 #6 AWG-250 Kcmil▲ Built to order. Allow 6–8 weeks for delivery.Discount Schedule HDSSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog4-9

Disconnect SwitchesType VBII (30-600A) with Flange Mounted Operating HandleLugs30 & 60A switches are suitable for use with 60° or 75°C wire. 100–600Aswitches are suitable for use with 75°C rated wire. All switches are suppliedwith factory installed line and load lugs.Lug Wire Ranges & DimensionsWire Ranges (Line, Load and Standard Neutral)SwitchAmpereRating UL Approved Wire Range Lug Wire Range30 #14-6 AWG (Cu/AI) #14-2 AWG (Cu/Al)60 #14-2 AWG (Cu/AI) #14-2 AWG (Cu/Al)100 #14-1/0 AWG (Cu/Al) #14-1/0 AWG (Cu/Al)200 #6 AWG-300 Kcmil (Cu/Al) #6 AWG-300 Kcmil (Cu/Al)400 1/0 AWG-750 Kcmil (Cu/Al) or (1) 1/0 AWG-750 Kcmil (Cu/Al) or(2) 1/0 AWG-250 Kcmil (Cu/Al) (2) 1/0 AWG-250 Kcmil (Cu/Al)600 (2) 1/0 AWG-750 Kcmil (Cu/Al) or (2) 1/0 AWG-750 Kcmil (Cu/Al) or(4) 1/0 -250 Kcmil (Cu/Al) (4) 1/0 AWG-250 Kcmil (Cu/Al)DISCONNECTSWITCHES4Approximate DimensionsMounting bracket shown with handle installed is suppliedwith Flange Mounted Switches only. All Panel MountedSwitches have a “L” shaped mounting pan with a line base,load base (if fusible) and mechanism installed.CatalogDimensionsNumber A B C D (min) D (max)Fusible, Panel MountedVBFS321 11.88 N/A 6.62 6.81 19VBFS322 13.12 N/A 8.50 6.81 19VBFS361 11.88 N/A 6.62 6.81 19VBFS362 13.12 N/A 8.50 6.81 19VBFS363 13.12 N/A 8.50 6.81 19VBFS364 17 N/A 12.33 7.05 19VBFS365 26.25 N/A 16.50 8.63 19VBFS366 26.25 N/A 16.50 8.63 19Non-fusible, Panel MountedVBNFS361 9.79 N/A 6.62 6.81 19VBNFS362 9.79 N/A 8.50 6.81 19VBNFS363 9.79 N/A 8.50 6.81 19VBNFS364 10.77 N/A 12.33 7.05 19VBNFS365 13 N/A 16.50 8.63 19VBNFS366 13 N/A 16.50 8.63 19Fusible, Flange MountedVBFS321F 11.88 14.06 7.00 7.27 N/AVBFS322F 13.12 15.83 8.85 7.27 N/AVBFS361F 11.88 14.06 7.00 7.27 N/AVBFS362F 13.12 15.83 8.85 7.27 N/AVBFS363F 13.12 15.83 8.85 7.27 N/AVBFS364F 17 18.20 12.68 7.57 N/ANon-fusible, Flange MountedVBNFS361F 9.79 11.78 7.00 7.27 N/AVBNFS362F 9.79 11.78 8.85 7.27 N/AVBNFS363F 9.79 11.78 8.85 7.27 N/AVBNFS364F 10.77 12.00 12.68 7.57 N/ABADC Dimension C for panel mounted switches indicates the minimum width from the lefthand edge of the switch mounting pan to the right hand inside surface of the enclosure.4-10Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Disconnect SwitchesType MCS (30-200A) — Switches, Fuse and No Fuse KitsFeatures▪ 30, 60, 100 and 200 Ampere Switches▪ UL Recognized (file # E121152 vol. 1 &2) and CSA Certified▪ Simple Mounting — with an integralswitch and over center mechanism▪ Horsepower & load break rated▪ Compact Size▪ Visible Blade Contacts▪ Rugged Construction — with a shortcircuit current rating of 10,000 ampswith Class H or 200,000 amps at 600Vmaximum AC, when fused with ClassR or Class J fusesSelection▪ Available with three operator handleoptions, allowing flexible placementof switch▪ Field Installable Auxiliary Contacts▪ Flexible Fuse Class Configurations▪ Flange mounted handles meet NFPA79requirementsType MCS Disconnect Switch withMax-Flex handle operatorOrdering InformationType MCS Disconnect Switch withfixed-depth, flange-mounted handleType MCS Disconnect Switch withrotary handleswitch catalog numbers denotes left or 4-12 for installation space requirements.1. Select the basic switch size you needright-handed mechanism drive.5. Select from the list of handle operators,(30, 60, 100 or 200 ampere).3. Choose either fuse or no fuse kit from the type which best suits your2. Check the switch selected against thechart below.ng Informationapplication. Handle operators can bemaximum horsepower rating requiredfor your application. “L” or “R” suffix on 4. Check “Minimum Dimensions” on page selected from the next page.Basic SwitchesMaximum Horsepower Rating, 3 Phase Catalog Catalog240 Volts AC 480 Volts AC 600 Volts AC250Switch Maximum Number Number Time Time Time VoltsAmpere Voltage Right Left Standard Delay Standard Delay Standard Delay DC ListRating Rating Hand Hand Fuse Fuse Fuse Fuse Fuse Fuse (max) Price $130 600 MCS603R MCS603L 13 17 1 ⁄2 15 115 17 1 ⁄2 120 15 464.00160 600 MCS606R MCS606L 17 1 ⁄2 15 15 130 15 150 10 534.00100 600 MCS610R MCS610L▲ 15 30 25 160 30 175 20 996.00200 600 MCS620R MCS620L▲ 25 60 50 125 60 150 40 1607.00Fuse And No Fuse Kits (Includes load base plus line and load fuse clips) No Fuse Kits For Class H For Class J For Class RBasicSwitch SwitchStandard Cu Only Catalog Std Catalog Std Catalog Std LugAmpere Catalog Kit Catalog List Catalog List Number List Number List Number List WireRating Number Description Number Price $ Number Price $ Price $ Price $ Price $ SizeNo Fuse TMK606 15.10 — — — — — — — —MCS603R 30A, 250V — — — — FCK203▲ 67.00 — — FCRK203 98.00 #14 to130 or 30A, 600V — — — — FCK206 87.00 FCJK603 98.00 FCRK206 119.00 #4 AWGMCS603L 60A, 250V — — — — FCK206 87.00 — — FCRK206 119.00 Cu/AI60A, 600V — — — — FCK606 127.00 FCJK606 127.00 FCRK606 154.00No Fuse TMK606 15.10 — — — — — — — —MCS606R 60A, 250V — — — — FCK206 87.00 — — FCRK206 119.00 #14 to160 or 60A, 600V — — — — FCK606 127.00 FCJK606 127.00 FCRK606 154.00 #4 AWGMCS606L 100A, 250V — — — — OFCK661▲ 294.00 OFCK661▲ 294.00 — Cu/AI100A, 600V — — — — OFCK661▲ 294.00 OFCK661▲ 294.00 —No Fuse TMK610 37.50 TMK610C 74.00 — — — — — —MCS610R 100A, 250V — — — — FCK610 296.00 FCK610 296.00 — #14 to100 or 100A, 600V — — — — FCK610 296.00 FCK610 296.00 — #2/0 AWGMCS610L 200A, 250V — — — — OFCK620 562.00 OFCK620 562.00 — Cu/AI200A, 600V — — — — OFCK620 562.00 OFCK620 562.00 —No Fuse TMK620 77.00 TMK620C▲ 156.00 — — — — — —MCS620R 200A, 250V — — — — FCK620 730.00 FCK620 730.00 — #6 to200 or 200A, 600V — — — — FCK620 730.00 FCK620 730.00 — 300 kcmilMCS620LCu/AI4 DISCONNECTSWITCHES▲ Built to order. Allow 6–8 weeks for delivery. For “copper only” connectors, order as follows:Fusible—order standard switch, standard fuse kit and copperonly no fuse kit.Non-Fusible—order standard switch and copper only nofuse kit. Includes both line and load lugs. For Class R fuses order Class H kit from this table and theClass R conversion kit from the next page. HP ratings for time delay fuses and for 250V DC alsoapply to Non-fusible switches.Discount Schedule HDSSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog4-11

4DISCONNECTSWITCHESDisconnect SwitchesType MCS (30-200A)Auxiliary Switch KitsContact ArrangementSwitch1 NO/1 NC 2 NO/2 NCCatalog Catalog List Catalog ListNumber Number Price $ Number Price $MCS603R MCSAKR136 347.00 MCSAKR236 602.00MCS603L MCSAKL136 347.00 MCSAKL236▲ 602.00MCS606R MCSAKR136 347.00 MCSAKR236 602.00MCS606L MCSAKL136 347.00 MCSAKL236▲ 602.00MCS610R MCSAK116 348.00 MCSAK216 603.00MCS610L MCSAK116 348.00 MCSAK216 603.00MCS620R MCSAK126 398.00 MCSAK226 802.00MCS620L MCSAK126 398.00 MCSAK226 802.00Handle OperatorsFixed Depth, Flange Mounted, Types 1, 3, 3R, 12 AccessoriesClass R Fuse Conversion KitsFuse Clip Catalog ListRating Number Price $100A, 600V SSRK33 54.00200A, 600V SSRK34 54.00Fuse Ejector KitsFuseSwitchEjector KitCatalog Catalog ListNumber Number Price $MCS610 FE100▲ 23.00MCS620 FE200▲ 35.50SwitchComplete Handle Mechanism Handle Only Switch Operator OnlyCatalog Catalog List Catalog List Catalog ListNumber Number Price $ Number Price $ Number Price $MCS603R FDFS06R 317.00 FDH10 252.00 FDS06R 65.00MCS603L FDFS06L 317.00 FDH10 252.00 FDS06L 65.00MCS606R FDFS06R 317.00 FDH10 252.00 FDS06R 65.00MCS606L FDFS06L 317.00 FDH10 252.00 FDS06L 65.00MCS610R FDFS06R 317.00 FDH10 252.00 FDS06R 65.00MCS610L FDFS06L 317.00 FDH10 252.00 FDS06L 65.00MCS620R FDFS20R 415.00 FDH20 247.00 FDS20R 168.00MCS620L FDFS20L 415.00 FDH20 247.00 FDS20L 168.00Variable Depth, Flange Mounted Max-Flex , Types 1, 3, 3R, 12 SwitchComplete Handle Mechanism Handle Only Switch Operator Only Cable Only Catalog Catalog List Catalog List Catalog List Catalog ListNumber Number Price $ Number Price $ Number Price $ Number Price $MCS603R FHOS06036R 625.00 FHOHS 311.00 FHOS06R 161.00 FHOEC036 153.00MCS603L FHOS06036L 625.00 FHOHS 311.00 FHOS06L 161.00 FHOEC036 153.00MCS606R FHOS06036R 625.00 FHOHS 311.00 FHOS06R 161.00 FHOEC036 153.00MCS606L FHOS06036L 625.00 FHOHS 311.00 FHOS06L 161.00 FHOEC036 153.00MCS610R FHOS06036R 625.00 FHOHS 311.00 FHOS06R 161.00 FHOEC036 153.00MCS610L FHOS06036L 625.00 FHOHS 311.00 FHOS06L 161.00 FHOEC036 153.00MCS620R FHOS20036R 710.00 FHOHS 311.00 FHOS20R 222.00 FHOJC036 177.00MCS620L FHOS20036L 710.00 FHOHS 311.00 FHOS20L 222.00 FHOJC036 177.00Variable Depth Rotary, Through-The-Door-Mounted, Types 1, 12 Variable DepthShaft Only Variable DepthMCS603R CRHOS06VD 158.50 CRHOH 51.00 RHOS06 76.00 RHOSVD 31.50MCS606R CRHOS06VD 158.50 CRHOH 51.00 RHOS06 76.00 RHOSVD 31.50MCS610R CRHOS06VD 158.50 CRHOH 51.00 RHOS06 76.00 RHOSVD 31.50MCS620R CRHOS20VD 207.50 CRHOH 51.00 RHOS20 125.00 RHOSVD 31.50MCS Disconnect Switch Panel Space RequirementsPanel Space RequirementsMinimum Dimensions (inches*)SwitchCatalogFuseNumber Size “A” “B” “C” Class30A/240V 6.13 5.52 8.11 H, K, RMCS603 30A/600V 6.13 5.52 10.11 H, K, R30A/600V 6.13 5.52 8.48 J60A/240V 6.13 5.52 7.86 H, K, RMCS606 60A/600V 6.13 5.52 10.38 H, K, R60A/600V 6.13 5.52 8.35 J100A/240V 7.38 7.59 11.85 H, K, RMCS610 100A/600V 7.38 7.59 13.85 H, K, R100A/600V 7.38 7.59 10.6 J200A/240V 9.17 9.00 14.7 H, K, RMCS620 200A/600V 9.17 9.00 17.2 H, K, R200A/600V 9.17 9.00 13.32 J“A” – Dimension is measured from eachcross bail pin.“B” – Dimension is measured from lineside barrier to load side barrier.“C” – Dimension is measured from lineside terminal of switch to load sideterminal of fuse load base.▲ Built to order. Allow 6–8 weeks for delivery. For Type 4 and 4X applications, order handle onlyCatalog Number100A - FDH104 (list price $354.00)200A - FDH204 (list price $349.00) For Type 4 and 4X applications, order handle onlyCatalog Number FHOHS4, List Price $432.00 Standard cable length is 36 inches. Alternate lengths areavailable as follows:Length Amps Cat. No. List Price $48" 30–100 FHOEC048 182.0060" 30–100 FHOEC060 203.0048" 200 FHOJC048 209.0060" 200 FHOJC060 239.00 For Type 4 and 4X applications, order handle onlyCatalog Number RHOH4, List Price $150.00 For Type 3 and 3R applications, order handle onlyCatalog Number RHOH, List Price $116.00 Min. enclosure depth from mounting pan to handle mountingsurfaces: 30-100A 6.44 Inches200A 10.93 Inches*For millimeters multiply inches by 25.4.4-12Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule HDSS & MCCB

Disconnect SwitchesType CFS Compact Fusible SwitchesFeatures▪ 30–400A ratings▪ UL Listed & CSA Certified▪ IEC 60 947-3 Certified & CE marked▪ Door mounted rotary handles withdefeatable cover interlock▪ Meets UL requirements for both mainand branch circuit applications▪ Compact size▪ 50 or 100KA with Class CC fuses or upto 200KA with Class J fuses▪ Load break and horsepower rated▪ Quick make and break operation▪ All handles are padlockable with up to(3) padlocks with 5/16" hasps in theOFF positionFeatures and Ordering Information▪ Catalog number CFS361C5, CFS361J5& CNFS361 can be DIN-rail mountedand can be either front or side operatedwith standard rotary handles▪ Handles are available in Type 1, 3R,4/4X & 12 ratings▪ NFPA 79 field installed kits are availableSwitch Shaft HandleLugs/AccessoriesCFS362JCFSS10200HCFSH10B4CFSL2004 DISCONNECTSWITCHESOrdering Information1. Select the panel mounted switchrequired based on Ampere, HP andAIC requirements. Switches with aright hand mechanism are standard.30-100A switches with a left handmechanism are available.2. Select handle based on environmentalrating required.3. Select operating shaft (200 or 400mmin length). For enclosure depths of 9.0"or less from panel mounting surface toinside of door use 200mm long shafts.For deeper enclosures use 400mmlong shafts. 30A 50kA switches can beused in 10" deep enclosures (panel toinside of door) with 200mm shaft andCFSH5 handles.Note: Be sure to check shaft and handlecompatibility with the switch selected byusing the information provided in theselection tables.4. Line & load lugs are provided asstandard on 30 & 60A switches.Terminal kits are available for100–400A switches if needed.5. Auxiliary contacts are available ifneeded as follows:A.30A, 50kA switch CFS361C5 andnon-fusible 30A switch CNFS361will accept up to (4) aux contactswithout an aux contact holder.B.30A, 50kA switch CFS361J5 willaccept up to (2) aux contactswithout an aux contact holder.If more than (2) aux contacts arerequired order aux contacts PLUSaux contact holder kit CFSAUXH1.C.For all 100 or 200kA 30–400Aswitches order the aux contactsrequired PLUS aux contact holder kitCFSAUXH2.6. If non-fusible switch is requiredorder a shorting bar for 60-600Aswitches or catalog number CNFS361for 30A.7. All switches are supplied with lineshields as standard. 30, 60 & 400Aswitches are also supplied with loadshields. Load side terminal shroud kitsare available for 100 & 200A switches.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog4-13

4DISCONNECTSWITCHESDisconnect SwitchesType CFS Compact Fusible SwitchesFusible Switches, 3-Pole 600V AC Max, 250V DC Max Max Horsepower RatingsACSwitch Fuse ShortAmpere Catalog List Provisions 240V 480V 600V 250V CircuitRating Number Price $ Provided 3Ø AC 3Ø AC 3Ø AC DC RatingStandard - with Right Hand Mounted Mechanism30 CFS361C5 361.00 Class CC 7.5 15 20 5 50kA30 CFS361J5 376.00 Class J 7.5 15 20 5 50kA30 CFS361C 382.00 Class CC 7.5 15 20 5 100kA30 CFS361J 424.00 Class J 7.5 15 20 5 200kA30 CNFS361 336.00 None 7.5 15 20 5 50kA60 CFS362J 488.00 15 30 50 10 100 CFS363J 678.00 Class J 30 60 75 20 200kA200 CFS364J 1710.00 60 125 150 40 400 CFS365J 2462.00 125 250 350 50 Optional - with Left Hand Mounted Mechanism30 CFS361JL 452.00 7.5 15 20 5 60 CFS362JL 511.00 Class J 15 30 50 10 200kA100 CFS363JL 710.00 30 60 75 20 Operating Shafts ShaftCatalog List LengthNumber Price $ In. (mm) Switch & Handle CompatibilityCFSS5200 34.00 7.9 (200) 5mm x 5mm for use with CFS361C5, CFS361J5 &CFSS5400 36.00 15.7 (400) CNFS361 switches & with “CFSH5” handles onlyCFSS5200H 34.00 7.9 (200) 5mm x 5mm for use with all “CFSH10” handles & withCFSS5400H 36.00 15.7 (400) CFS361C5, CFS361J5 & CNFS361 switches onlyCFSS10200H 36.00 7.9 (200) 10mm x 10mm for use with all “CFSH10” handles & withCFSS10400H 38.50 15.7 (400) all switches except CFS361C5, CFS361J5 & CNFS361Rotary Operating Handles—Door Mounted(for use with 50kA CFS361C5 & CFS361J5 switches only)Type 1, 3R & 12 Catalog ListNumber Price $ Color Operating Shaft CompatibilityCFSH5B12 114.00 BlackCFSS5200 OR CFSS5400 (5mm x 5mm)CFSH5R12 114.00 Yellow & RedSwitch and Handle SelectionCFS361J5CFSS5400CFSS5200Rotary Operating Handles—Door Mounted(for use with all operating shafts except CFSS5200 & CFSS5400and with all CFS switches)Catalog ListNumber Price $ Color DescriptionType 1, 3R & 12 CFSH10B12 137.00 BlackHeavy duty pistol grip (3.78" long)CFSH10R12 137.00 Yellow & RedCFSH10BL12 143.00 BlackHeavy duty pistol grip (6.00" long)CFSH10RL12 143.00 Yellow & RedType 1, 3R, 4/4X & 12 CFSH10B4 149.00 BlackHeavy duty pistol grip (3.78" long)CFSH10R4 149.00 Yellow & RedCFSH10BL4 162.00 BlackHeavy duty pistol grip (6.00" long)CFSH10RL4 162.00 Yellow & RedCFSH5B12Line and load lugs included.Line and load lugs are not included.Order from table on next page if required. DC HP rating shown requires (2) poles to be connected inseries. DC HP rating shown requires (3) poles to be connected inseries. Catalog numbers CFS361C5 & CFS361J5 accept 5mm x5mm operating shafts. All others accept 10mm x 10mmoperating shafts. Compact pistol grip design (3.25" long) with defeatablecover interlock. Cover can be opened when handle ispadlocked in the OFF position. Defeatable cover interlock provided. Cover cannot beopened when handle is padlocked in the OFF position. Catalog number CNFS361 is a non-fusible switch.4-14Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule HDSS

Disconnect SwitchesType CFS Compact Fusible SwitchesAccessoriesCFSAUXH2, CFSAUXINO & CFSAUXINC CFSL100, 200 & 400Type CFS Fusible Switch AccessoriesCatalog ListNumber Price $ DescriptionTerminals CFSL100 71.00 100A Lug Kit (6 lugs per kit)CFSL200 100.00 200A Lug Kit (6 lugs per kit)CFSL400 276.00 400A Lug Kit (6 lugs per kit)Shorting Bars (no fuse kits)CFSSB60 35.50 60A Shorting Bar Kit (3 links per kit)CFSSB100 50.00 100A Shorting Bar Kit (3 links per kit)CFSSB200 71.00 200A Shorting Bar Kit (3 links per kit)CFSSB400 103.00 400A Shorting Bar Kit (3 links per kit)Auxiliary Contacts CFSAUXH1 52.00 Aux Contact Holder (30A 50kA Sws)CFSAUXH2 52.00 Aux Contact Holder (30–400 100 & 200kA SW)CFSAUX1NO 28.00 Aux Contact 1 NO (30–400A Sws)CFSAUX1NC 28.00 Aux Contact 1 NC (30–400A Sws)Terminal ShroudsCFSTS100 84.00 100A Shroud KitCFSTS200 134.00 200A Shroud KitCFSTS400 155.00 400A Shroud KitPadlock Kit (when door is open) CFSPLK 100.00 Shaft Padlocking Kit for 30A Compact SwitchCFSAUXH1 & CFSAUXINO4 DISCONNECTSWITCHESNFPA 79 KitsKits provide an operating shaft suitable for use with all heavy duty handles (not foruse with CFSH5B12 or CFSH5R12). Kits also provide an internal operating handle &an internal OFF padlocking provision.CFSNFPA1 207.00 For use with CFS361C5, CFS361J5 & CNFS361CFSNFPA2 343.00 For use with CFS361J - CFS365J & CFS361CNote: CFSNFPA2 cannot be used in combination with CFSAUX1NO or CFSAUX1NC auxiliary contacts.CFS5B100 – 400 Supplied as standard on 30 & 60A switches. CFS361C5 and CNFS361 will accept (4) aux contactswithout an aux contact holder. CFS361J5 will accept (2)aux contacts without an aux contact holder. ON ALLOTHER SWITCHES CFSAUXH2 IS REQUIRED TOMOUNT AUX CONTACTS.Discount Schedule HDSS Supplied as standard on all but 30A compact switches. 12.6 inch (320 mm) long operating shaft included. 11.3 inch (288 mm) long operating shaft included. Line side terminal shrouds supplied with switch. Supplied on both line and load side with CFS365Jswitch.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog4-15

Disconnect SwitchesType CFS Compact Fusible SwitchesUL & CSA Technical CharacteristicsDimensions and Technical CharacteristicsCatalog CFS361J & CFS362J & CFS363J &Number CFS361C5 CFS361J5 CFS361C CFS361JL CFS362JL CFS363JL CFS364J CFS3615JAmp Rating 30 30 30 30 60 100 200 400Max AC Volts 600 600 600 600 600 600 600 600Electrical Endurance 6000 6000 6000 6000 6000 6000 6000 1000Max Horsepower Ratings240V 3Ø AC 7.5 7.5 7.5 7.5 15 30 60 125480V 3Ø AC 15 15 15 15 30 60 125 250600V 3Ø AC 20 20 20 20 50 75 150 350250V DC 5 5 5 5 10 20 40 50 AC Short Circuit Rating 50kA 50kA 100kA 200kA 200kA 200kA 200kA 200kAFuse Type (Class) CC J CC J J J J JElectrical Endurance 6000 6000 6000 6000 6000 6000 6000 1000Mechanical Endurance 10000 10000 10000 10000 10000 10000 8000 6000Shaft Cross Section 5mm 5mm 10mm 10mm 10mm 10mm 10mm 10mmOperating Torque (lb. In.) 21 21 53 88 88 88 106 132Aux ContactsNema Rating AC A600 A600 A600 A600 A600 A600 A600 A600Nema Rating DC N600 N600 N600 N600 N600 N600 N600 N6004DISCONNECTSWITCHESIEC Technical CharacteristicsCatalog CFS361J & CFS362J & CFS363J &Number CFS361C5 CFS361J5 CFS361C CFS361JL CFS362JL CFS363JL CFS364J CFS3615JRating InsulationVoltage Ui 800 800 750 750 750 750 750 800Rated ImpulseVoltage (Uimp) 8kV 8kV 8kV 8kV 8kV 8kV 8kV 8kVOperational Current I e400V AC(AC22A & AC23A) 32 32 32 32 63 100 200 400690V AC(AC22A & AC23A) 32 32 32 32 63 100 200 400Motor Power (kW)400V AC 15 15 15 15 30 51 100 220500V AC 18.5 18.5 18.5 18.5 40 63 140 220690V AC 25 25 25 25 55 90 185 220Max Peak (kA peak)let though current 5.5 5.5 7.6 17.6 17.6 22 32 36Cu cable sie (mm 2 ) 6 6 6 6 10 25 50 185Wire Ranges Line & Load LugsSwitch UL MechanicalAmpere Approved Wire RangeRating Wire Size (75°C) of Lug (75°C)30 #10 Cu #14–10 Cu60 #6 Cu #10–3 Cu100 #3 Cu #14–2/0 Cu/Al200 #3/0 Cu #6–3/0 Cu/Al400(2) 300 kcmil Alor (2) 4/0 Cu(2)#2–600 kcmil Cu/AlPanel Space RequirementsCatalog Ampere Dimensions Inches (mm)Number Rating Height Width Depth CFS361C5 30 4.56 (116) 3.78 (96) 6.00 (152)CFS361J5 30 4.56 (116) 4.15 (105) 6.00 (152)CFS361C 30 5.88 (149) 5.62 (143) 7.00 (178)CFS361J & CFS361JL 30 5.88 (149) 6.75 (171) 7.00 (178)CFS362J & CFS362JL 60 5.88 (149) 6.75 (171) 7.00 (178)CFS363J & CFS363JL 100 7.19 (183) 8.25 (210) 7.00 (178)CFS364J 200 8.13 (206) 9.44 (240) 8.00 (203)CFS365J 400 14.94 (363) 11.94 (303) 8.00 (203) Ratings also apply to catalog number CNFS361except the 50kA AIC rating applies when switch isprotected by Class J or CC 30A max. fuses. DC HP rating requires (2) poles to be connected inseries. DC HP rating requires (3) poles to be connected inseries. Ratings also apply to catalog number CNFS361. Minimum dimension from mounting surface to insideof cover. Dimensions shown can be decreased if auxcontacts are not required.4-16Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Disconnect SwitchesType VB Panelboard UnitsFeaturesExclusive Vacu-Break ® ClampmaticArc Control — Hazardous switchingarcs are safely confined and controlled inthe Vacu-Break chamber.NEMA Phasing — All line connectionsare phased as per NEMA Standards, i.e.,left to right and top to bottom as youface the unit.Pressure Terminal Connectors —Suitable for aluminum or copper (100Amps or larger). All Terminal Connectors200 Amps and larger are removable.Connection Screws — Bullet nosed forpositive location and seating of screw.Quick-Make Quick-Break — Assuredby design of cam mechanism andpowerful springs. Positive operation in“ON”or “OFF” position results fromdesign of the cross arm and Vacu-Breakhead linkage.Easy Mounting — Mounting feet havecaptive bullet nosed screws added,which seat quickly and positively,reducing installation time.Padlocking Member — Provideslocking of handle in the “ON”or “OFF”position.Fibre End Barriers — Insulated EndBarriers prevent damage to wire duringinstallation and are designed withopenings large enough to accommodateremovable lugs (200 Amps and largerunits).High Pressure Spring ReinforcedCopper Fuse Clips — Provided extrapressure at the contact points. Fuseclips are removable from the front in 7 1 ⁄2"and 10" units and from the rear of 5"units.Voidable Cover Interlock — Permitsonly authorized personnel to void thedoor interlock and open door withswitch “on.” “Fool proof” mechanismwill not permit door to be closed unlesshandle is in the correct position.SpecificationsApplicationVB Panelboard Switches are intendedfor use in applications where:1. Rugged constructions, reliable performance,continuity of service and ease ofmaintenance are emphasized, or2. Available fault currents higher than10,000A are likely to be encountered, inmanufacturing plants, mass productionindustries and commercial, institutionaland other large buildings served by networksystems or transformers of highcapacities.GeneralShort Circuit Withstand RatingsSuitable for use on systems capable ofdelivering not more than 200,000 RMSsymmetrical amperes of fault currentwhen Class J or R fuses are installed.1200A switches are the exception,which are suitable for use on circuitscapable of delivering not more than100,000 RMS symmetrical amperes offault current when Class L fuses areinstalled. Also, 100–800A switches withClass T fuses and field adapter kit,which are 200,000 RMS symmetricalrated.FusesFusible switches will accept thefollowing UL Class fuses:Class HClass KClass R or J with proper adapter kitClass L — 800 and 1200A switchesClass T — 100–800 switches withproper adapter kitCover InterlocksVoidable cover interlocks standard on allswitches. Prevents cover from beingopened when switch is in the “ON”position.UL ListingListed by UL under file #E6849 asmiscellaneous switches and alsosuitable for use as service equipment(where applicable). Meets UL98standard for enclosed and deadfrontswitches.NEMA SpecificationsMeets NEMA standard KS-1-1990 fortype HD switches.Federal SpecificationsMeets previous federal specificationsW-S-865C for heavy duty switches (TypeHD) Type 1 switches — general purposeenclosed (Type 1).4 DISCONNECTSWITCHESSwitchMaximum Withstand Ratings — 240V ACMaximum Withstand Ratings — 600V ACRating H, K Fuses R Fuses J Fuses L Fuses T Fuses H, K Fuses R Fuses J Fuses L Fuses T Fuses1130–30 10,000 200,000 — — — 10,000 200,000 200,000 — —1130–60 10,000 200,000 200,000 — — 10,000 200,000 200,000 — —1160–60 10,000 200,000 200,000 — — 10,000 200,000 200,000 — —1160–100 10,000 200,000 200,000 — — 10,000 200,000 200,000 — 200,0001100 10,000 200,000 200,000 — 200,000 10,000 200,000 200,000 — 200,0001100–100 10,000 200,000 200,000 — 200,000 10,000 200,000 200,000 — 200,0001200 10,000 200,000 200,000 — 200,000 10,000 200,000 200,000 — 200,0001200–200 10,000 200,000 200,000 — 200,000 10,000 — 200,000 — —1400 10,000 200,000 200,000 — 200,000 10,000 200,000 200,000 — 200,0001600 10,000 200,000 200,000 — 200,000 10,000 200,000 200,000 — 200,0001800 — — — 200,000 200,000 — — — 200,000 200,0001200 — — — 100,000 — — — — 100,000 — 2 1 /2" units will not accept Class R or J fuse clip kits andare rated 10,000 AIC max. Ratings are for 600V switches and fuses when used on a240V max. AC system.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog4-17

Disconnect SwitchesType VB Panelboard UnitsFusible Units For SB1, SB2 Switchboards and F1, F2 PanelboardsSelection4DISCONNECTSWITCHESCatalog Numbering SystemV 7 E 3 2 3 3▲ ▲ ▲ ▲ ▲ ▲ ▲Vacu-BreakUnitWidth2 = 12" 7 = 17" M = 17" (Main)HeightA = 2 1 ⁄2" B = 5" E = 7 1 ⁄2" F = 10" H = 15" S = 18.75"Number of Poles2 3Voltage Rating2 = 240V 6 = 600VAmperes0 = Single UnitDouble 1 = 30A 2 = 60A 3 = 100A 4 = 200AAmpere Rating1 = 30A 2 = 60A 3 = 100A 4 = 200A 5 = 400A 6 = 600AExample: V7E3233 = Vacu-Break Unit, 17" Wide, 7 1 ⁄2" High, 3-Pole, 240 Volts, Double Branch Unit with 100 Amp Rating each side. Suffixletters MS indicate Main Switch.Vacu-Break ® Fusible Units2-Pole , 12" Wide240V AC, 250V DCAmpereUnitHeightUnitDepthHorsepower Rating240 Volt AC250 Volt Lug Wire Range (Cu/AI)UnitWeight Catalog ListRating (inches) (inches) Standard Maximum DC and Cables Per Pole (pounds) Number Price $130–30 2 1 ⁄2 4 1 ⁄2 01 1 ⁄2 03 05 (1)–#14 to #8 (Cu Only) 15 V2A2211LR■ 588.00130–30 5 4 1 ⁄2 01 1 ⁄2 03 05 (1)–#14 to #8 19 V2B2211LR■ 758.00130–60 5 4 1 ⁄2 01 1 ⁄2–3 03–10 05–10 (1)–#14 to #4 19 V2B2212LR■ 837.00160–60 5 4 1 ⁄2 03 10 10 (1)–#14 to #4 19 V2B2222LR■ 837.00100 7 1 ⁄2 6 3 ⁄4 07 1 ⁄2 15 20 (1)–#10 to #1/0 14 V2E2203LR■ 671.00200 7 1 ⁄2 6 3 ⁄4 15 — 40 (1)–#6 to 250 kcmil 19 V2E2204LR■ 1175.003-Pole240V AC, 250V DCAmpereUnitHeightUnitDepthHorsepower Rating240 Volt ACLug Wire Range (Cu/AI)UnitWeight Catalog ListRating (inches) (inches) Standard Maximum and Cables Per Pole (pounds) Number Price $Branch Circuits, 12" Wide Units130–30 2 1 ⁄2 4 1 ⁄2 03 07 1 ⁄2 (1)–#14 to #8 (Cu Only) 5 V2A3211■ 652.00130–30 5111 4 1 ⁄2 03 07 1 ⁄2 (1)–#14 to #8 9 V2B3211■ 943.00130–30 5111 4 1 ⁄2 03 07 1 ⁄2 (1)–#14 to #8 9 V2B3211R ■ 1007.00130–60 5111 4 1 ⁄2 03–7 1 ⁄2 07 1 ⁄2–15 (1)–#14 to #4 9 V2B3212■ 943.00130–60 5111 4 1 ⁄2 03–7 1 ⁄2 07 1 ⁄2–15 (1)–#14 to #4 9 V2B3212R ■ 1007.00160–60 5111 4 1 ⁄2 07 1 ⁄2 15 (1)–#14 to #4 9 V2B3222 943.00160–60 5111 4 1 ⁄2 07 1 ⁄2 15 (1)–#14 to #4 9 V2B3222R ■ 1007.00100 7 1 ⁄2 6 3 ⁄4 15 30 (1)–#10 to #1/0 14 V2E3203 758.00200 10 11 6 3 ⁄4 25 60 (1)–#6 to 250 kcmil 21 V2F3204 1473.00Main Switch , 12" Wide Units, Back Connected200 10 6 3 ⁄4 25 50 21 V2F3204MS■ 1473.00For inches / millimeters conversion, multiply inches by 25.4.■ Built to order. Allow 2–3 weeks for delivery. These units are available in LR (left, right) connectionfigurations only. This unit is not a Vacu-Break unit, but rather operates on asliding contact, double break principle. Rated 10,000 AICmax. with either Class H or K fuses. Will not accept Class Rfuse clip kits. Units set up for R-fuse application only. For 2-pole main switch (200A), use 3-pole main switchVacu-Break unit. Load-side furnished with spade type bolted terminal pads.4-18Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule VBSS

Disconnect SwitchesType VB Panel UnitsVacu-Break ® Fusible Units for SB1, SB2 Switchboards and F1, F2 PanelboardsFor inches / millimeters conversion, multiply inches by 25.4.■ Built to order. Allow 2–3 weeks for delivery.❒ MR suffix. Built to order. Allow 2–3 weeks for delivery.❍ MR, LM suffix. Built to order. Allow 2–3 weeks fordelivery.Discount Schedule VBSS Order 2-pole branch circuit units by adding appropriateconnection designation LM, LR or MR (indicating Left,Middle and Right, facing the panel). This unit is not a Vacu-Break unit, but rather operates on asliding contact, double break principle. Rated 10,000 AICmax. with either Class H or K fuses. Will not accept Class Rfuse clip kits. MR not available.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogSelectionAmpereUnitHeightUnitDepthHorsepower Rating240 Volt AC250 Volt Lug Wire Range (Cu/AI)UnitWeight Catalog ListRating (inches) (inches) Standard Maximum DC and Cables Per Pole (pounds) Number Price $2-Pole , Branch Circuits, 17" Wide Units240V AC, 250V DC30–30 12 1 ⁄2 6 3 ⁄4 01 1 ⁄2 003 05 (1)–#14 to #8 (Cu Only) 15 V7A2211__ ■ 652.0030–30 15 6 3 ⁄4 01 1 ⁄2 003 05 (1)–#14 to #8 19 V7B2211__ ❍ 837.0030–30 15 6 3 ⁄4 01 1 ⁄2 003 05 (1)–#14 to #8 19 V7B2211_ _R 933.0030–60 15 6 3 ⁄4 01 1 ⁄2 –3 003–10 05–10 (1)–#14 to #4 19 V7B2212LR ■ 931.0030–60 15 6 3 ⁄4 01 1 ⁄2 –3 003–10 05–10 (1)–#14 to #4 19 V7B2212LRR ■ 994.0060–60 15 6 3 ⁄4 03 010 10 (1)–#14 to #4 19 V7B2222__ 931.0060–60 15 6 3 ⁄4 03 010 10 (1)–#14 to #4 19 V7B2222_ _R 994.0060–100 17 1 ⁄2 6 3 ⁄4 03–7 1 ⁄2 010–15 10–20 (1)–#10 to #1/0 18 V7E2223LR ■ 1090.00100–100 17 1 ⁄2 6 3 ⁄4 07 1 ⁄2 015 20 (1)–#10 to #1/0 20 V7E2233__ ❍ 1090.00100 17 1 ⁄2 6 3 ⁄4 07 1 ⁄2 015 20 (1)–#10 to #1/0 14 V7E2203LR 863.00200 17 1 ⁄2 6 3 ⁄4 15—40 (1)–#6 to 250 kcmil 21 V7E2204__ ❒ 1241.00400 15 10 1 ⁄2 — — 50(1)–#1/0 to 500 kcmil or63 V7H2205LR 2947.00(2)–#1/0 to 300 kcmil600 15 10 1 ⁄2 — — — (2)–#4/0 to 500 kcmil 63 V7H2206LR ■ 3410.002-Pole, Main Switch, 17" Wide Units, Back Connected240V AC, 250V DC200 17 1 ⁄2 6 3 ⁄4 15 — 40 21 V7E2204MS ■ 1241.00400 15 10 1 ⁄2 — — 50 63 V7H2205MS 2947.00600 15 10 1 ⁄2 — — — 63 V7H2206MS 3410.003-Pole, Branch Circuits, 17" Wide Units240V AC30–30 12 1 ⁄2 6 3 ⁄4 03 007 1 ⁄2 — (1)–#14 to #8 (Cu Only) 15 V7A3211 721.0030–30 15 6 3 ⁄4 03 007 1 ⁄2 — (1)–#14 to #8 19 V7B3211 991.0030–30 15 6 3 ⁄4 03 007 1 ⁄2 — (1)–#14 to #8 19 V7B3211R 1052.0030–60 15 6 3 ⁄4 03–7 1 ⁄2 007 1 ⁄2–15 — (1)–#14 to #4 19 V7B3212 991.0030–60 15 6 3 ⁄4 03–7 1 ⁄2 007 1 ⁄2–15 — (1)–#14 to #4 19 V7B3212R 1052.0060–60 15 6 3 ⁄4 07 1 ⁄2 015 — (1)–#14 to #4 19 V7B3222 991.0060–60 15 6 3 ⁄4 07 1 ⁄2 015 — (1)–#14 to #4 19 V7B3222R 1052.0060 17 1 ⁄2 6 3 ⁄4 07 1 ⁄2 015 — (1)–#14 to #4 13 V7E3202 834.0060–100 17 1 ⁄2 6 3 ⁄4 07 1 ⁄2–15 015–30 — (1)–#10 to #1/0 18 V7E3223 1296.00100–100 17 1 ⁄2 6 3 ⁄4 15 030 — (1)–#10 to #1/0 20 V7E3233 1296.00100–100 17 1 ⁄2 6 3 ⁄4 15 030 — (1)–#10 to #1/0 20 V7E3233R 1509.00100 17 1 ⁄2 6 3 ⁄4 15 030 — (1)–#10 to #1/0 14 V7E3203 834.00200–200 10 6 3 ⁄4 25 060 — (1)–#6 to 250 kcmil 40 V7F3644 3192.00200–200 10 6 3 ⁄4 25 060 — (1)–#6 to 250 kcmil 40 V7F3244R 3334.00200 10 6 3 ⁄4 25 060 — (1)–#6 to 250 kcmil 21 V7F3204 1519.00400 15 10 1 ⁄2 50 125— (1)–#1/0 to 500 kcmil or(2)–#1/0 to 300 kcmil63 V7H3205 3410.00400 15 10 1 ⁄2 50 125 —(1) 250 to 750 kcmil or(2) 1/0 to 300 kcmil63 V7H3205750 3410.00600 15 10 1 ⁄2 75 200 — (2)–#4/0 to 500 kcmil 63 V7H3206 3835.003-Pole, Main Switch, 17" Wide Units (Vertical Mount, Top Feed, Front Connected)240V AC400 18.75 10 3 ⁄8 50 125 — — — VMS325T 3410.00600 18.75 10 3 ⁄8 75 200 — — — VMS326T 3835.003-Pole, Main Switch, 17" Wide Units (Vertical Mount, Bottom Feed, Front Connected)240V AC400 18.75 10 3 ⁄8 50 125 — — — VMS325B 3410.00600 18.75 10 3 ⁄8 75 200 — — — VMS326B 3835.003-Pole, Main Switch, 17" Wide Units, Back Connected240V AC100 17 1 ⁄2 6 3 ⁄4 15 030 — 14 V7E3203MS 959.00200 10 6 3 ⁄4 25 060 — 21 V7F3204MS 1519.00400 15 10 1 ⁄2 50 125 — 63 V7H3205MS 3410.00600 15 10 1 ⁄2 75 200 — 63 V7H3206MS 3835.00 Available as Type LR connection designation only. Switches set up for R-fuse applications only. Rated 600 Volts but factory configured to accept 250VClass H, K or R fuses. Field convertible for Class J fuses for600V applications. Field convertible for 300V Class T fusewith TFAK42 kit. Load-side furnished with spade type bolted terminal pads.4-194 DISCONNECTSWITCHES

4DISCONNECTSWITCHESDisconnect SwitchesType VB Panel UnitsVacu-Break ® Fusible Units For SB1, SB2 Switchboards and F1, F2 PanelboardsSelectionAmpereUnitHeightUnitDepthHorsepower Rating480 Volt AC 600 Volt ACLug Wire Range (Cu/AI)UnitWeight Catalog ListRating (inches) (inches) Standard Maximum Standard Maximum and Cables Per Pole (pounds) Number Price $2-Pole, Branch Circuits, 17" Wide Units 600V AC, 250V DC1130–30 17 1 ⁄2 6 3 ⁄4 003 007 1 ⁄2 003 010 (1)–#14 to #8 14 V7E2611LR ■ 1063.001130–60 17 1 ⁄2 6 3 ⁄4 003–5 007 1 ⁄2–20 003–5 020–25 (1)–#14 to #4 14 V7E2612LR ■ 1063.001160–60 17 1 ⁄2 6 3 ⁄4 005 020 010 025 (1)–#14 to #4 14 V7E2622LR ■ 1063.001100 17 1 ⁄2 6 3 ⁄4 010 020 015 040 (1)–#10 to #1/0 14 V7E2603LR ■ 753.001200 10 6 3 ⁄4 025 050 030 050 (1)–#6 to 250 kcmil 21 V7F2604LR ■ 1657.001400 15 10 1 ⁄2 — — — — (1)–#1/0 to 500 kcmil 63 V7H2605MR ◆ 3410.003-Pole, Branch Circuits, 17" Wide Units600V AC, 250V DC1130–30 17 1 ⁄2 6 3 ⁄4 005 015 007 1 ⁄2 020 (1)–#14 to #8 14 V7E3611 1364.001130–30 17 1 ⁄2 6 3 ⁄4 005 015 007 1 ⁄2 020 (1)–#14 to #8 14 V7E3611R 1568.001130 17 1 ⁄2 6 3 ⁄4 005 015 007 1 ⁄2 020 (1)–#14 to #8 14 V7E3601 931.001130–60 17 1 ⁄2 6 3 ⁄4 005–15 015–30 007 1 ⁄2–15 020–50 (1)–#14 to #4 14 V7E3612 1364.001160–60 17 1 ⁄2 6 3 ⁄4 015 030 015 050 (1)–#14 to #4 14 V7E3622 1364.001160–60 17 1 ⁄2 6 3 ⁄4 015 030 015 050 (1)–#14 to #4 14 V7E3622R 1568.001160 17 1 ⁄2 6 3 ⁄4 015 030 015 030 (1)–#14 to #4 14 V7E3602 931.001160–100 17 1 ⁄2 6 3 ⁄4 015–25 030–60 015–30 050–75 (1)–#10 to #1/0 18 V7E3623 1915.001100–100 17 1 ⁄2 6 3 ⁄4 025 060 030 075 (1)–#10 to #1/0 20 V7E3633 1915.001100–100 17 1 ⁄2 6 3 ⁄4 025 060 030 075 (1)–#10 to #1/0 20 V7E3633R 2057.001100 17 1 ⁄2 6 3 ⁄4 025 060 030 075 (1)–#10 to #1/0 14 V7E3603 931.001200–200 10 6 3 ⁄4 050 125 060 150 (1)–#6 to 250 kcmil 40 V7F3644J 3192.001200 10 6 3 ⁄4 050 125 060 150 (1)–#6 to 250 kcmil 21 V7F3604 1736.001200 10 6 3 ⁄4 050 125 060 150 (1)–#6 to 250 kcmil 21 V7F3604R 1808.001 400 15 101 ⁄2 100 250 125 350(1)–#1/0 to 500 kcmil or(2)–#1/0 to 300 kcmil63 V7H3605 4033.001 400 15 101 ⁄2 100 250 125 350(1)–250 to 750 kcmil or(2)–#1/0 to 300 kcmil63 V7H3605750 4033.001600 15 10 1 ⁄2 150 400 200 500 (2)–#4/0 to 500 kcmil 63 V7H3606 4164.003-Pole, Main Switch, 17" Wide Units (Vertical Mount, Top Feed, Front Connected)600V AC, 250V DC1400 18.75 10 3 ⁄8 100 250 125 350 — VMS365T 4033.001600 18.75 10 3 ⁄8 150 400 200 500 — VMS366T 4164.003-Pole, Main Switch, 17" Wide Units (Vertical Mount, Bottom Feed, Front Connected)600V AC, 250V DC1400 18.75 17 11 ⁄16 100 250 125 350 — VMS365B 4033.001600 18.75 17 11 ⁄16 150 400 200 500 — VMS366B 4164.003-Pole, Main Switch, 17" Wide Units, Back Connected600V AC, 250V DC1100 17 1 ⁄2 16 3 ⁄4 125 150 130 150 14 V7E3603MS■ 931.001200 10 16 3 ⁄4 150 125 160 150 21 V7F3604MS■ 1736.001400 15 10 1 ⁄2 100 250 125 350 63 V7H3605MS 4033.001600 15 10 1 ⁄2 150 400 200 500 63 V7H3606MS 4164.003-Pole, Switchboard Units, 21" Wide Units, Front Connected 600V AC, 250V DC1800 25 12 3 ⁄4 200 500 250 500 — 160 VF357TL or BL ❍ 9327.001200 25 12 3 ⁄4 — — — — — 160 VF358TL or BL 9568.003-Pole, Switchboard Units, 21" Wide, Back Connected600V AC, 250V DC1800 25 12 3 ⁄4 200 500 250 500 — 160 VB357TL or BL ■ 8573.001200 25 12 3 ⁄4 — — — — — 160 VB358TL or BL ■ 8993.00■ Built to order. Allow 2–3 weeks for delivery.◆ MR suffix only is available and built to order. Allow 2–3weeks for delivery.❍ BL suffix. Built to order. Allow 2–3 weeks for delivery. Catalog number for 2-pole branch circuit units indicateconnection designation LM, LR or MR (indicating Left,Middle and Right, facing the panel). Unit configured to accept class J fuses only. Also accepts300V Class T fuses when used with TFAK42 adapter kit. Load-side furnished with spade type bolted terminal pads. Suffix “T” or “TL” indicates Top Feed.Suffix “B” or “BL” indicates Bottom Feed. Back connected units are also available. Substitute the letter“B” (back connected) for the letter “F” (front connected)in the prefix of the catalog number. All other featuresare identical. Available as Type MR designation only. Switches set up for R-fuse applications only. Available as Type LR designation only.4-20Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule VBSS

Disconnect SwitchesType VB Panelboard Units, AccessoriesSelectionExtension KitsTo extend Vacu-Break unit’s depth,order the extension kit which meetsthe specifications of the unit to beextended. Specify by catalog numberfrom the table below.Unit Height Normal Unit Depth Extended Unit DepthUnit Type (inches) (inches) (inches) Catalog Number List Price $V2A 12 1 ⁄2 4 9 ⁄16 16 3 ⁄4 W43000■ 41.50V2B 15 4 9 ⁄16 16 3 ⁄4 W43002 41.50V7A 12 1 ⁄2 6 3 ⁄4 10 1 ⁄2 W48762 114.00V7B 15 6 3 ⁄4 10 1 ⁄2 W48763 121.00V7E 17 1 ⁄2 6 3 ⁄4 10 1 ⁄2 W48764 154.00V7F 10 6 3 ⁄4 10 1 ⁄2 W48765 181.00Fuse Adapter KitsClass R and Class J Fuse Kits are single unit part numbers. Order (2) kits for dual units. Class T Fuse Kits are single pole part numbers.Order (3) kits for a 3-pole unit. To order the kit which meets the specifications of the unit to be changed, specify by catalog numberfrom the tables below.240 Volt Fuse Adapter KitsClass R Kits Class J Kits Class T KitsSwitch Catalog List Catalog List Catalog ListAmperage Number Price $ Number Price $ Number Price $130 Factory Inst. — — — — —160 W56628 91.00 W49829 163.00 — —100 W55365 61.00 W49827 131.00 TFAK32 76.00200 W55366 61.00 W49819 131.00 TFAK42 102.00400 W55367 91.00 W49814 330.00 TFAK52 102.00600 W55368 91.00 W49813 459.00 TFAK62 120.00600 Volt Fuse Adapter KitsClass R Kits Class J Kits Class T KitsSwitch Catalog List Catalog List Catalog ListAmperage Number Price $ Number Price $ Number Price $130 W56623 85.00 W49832 163.00 — —160 W56629 85.00 W49830 163.00 — —100 W55365 61.00 W49828 131.00 TFAK35 120.00200 W55366 61.00 W49818 163.00 TFAK45 143.00400 W55367 91.00 W49816 395.00 TFAK55 151.00600 W55368 91.00 W49815 330.00 TFAK65 174.00800 — — — — TFAK75 238.004 DISCONNECTSWITCHESVacu-Break Connecting Strap Kits For Panelboards and SwitchboardsAmpere 240V Unit 600V Unit S4/F1, FPP (10" Deep) List S5/F2 (12.75" Deep) List SB1, SB2, SB3, FC-20, FC-1 ListRating Height (inches) Height (inches) Strap Kit Price $ Strap Kit Price $ VB-5, VB-6, Strap Kit Price $130–30 12.5 — F602 46.00 F602D 210.00 — —130–30 15 17.5 F657 46.00 F657D 254.00 VB657 302.00130-60 15 17.5 F657 46.00 F657D 254.00 VB657 302.00160–60 15 17.5 F657 46.00 F657D 254.00 VB657 302.00160-100 17.5 17.5 F657 46.00 F657D 254.00 VB657 302.00100-100 17.5 17.5 F657 46.00 F657D 254.00 VB657 302.00100 17.5 17.5 F657 46.00 F657D 254.00 VB657 302.00200 17.5, 10 17.5, 10 F671 70.00 F671D 393.00 VB671 471.00200–200 10 10 F672 430.00 F672D 430.00 — —400 15 15 — — — — VB6150 211.00600 15 15 — — F6150D 186.00 VB6150 211.00For inches / millimeters conversion, multiply inches by 25.4.■ Built to order. Allow 2–3 weeks for delivery. For 200 A single units only. Dual units are suitable for Class Jonly, when used above 240V. 5˝ unit height switches only. For single units only.Discount Schedule VBSSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog4-21

4DISCONNECTSWITCHESDisconnect SwitchesType HCP Switchboard Units, AccessoriesFeatures▪ UL Listed under file number E6849Vol 1, Sect. 8▪ 400-1200A ratings▪ Visible contacts▪ Field installable shunt trip and auxiliaryswitch accessory kits▪ Installs in existing Siemensswitchboards and power panelboards▪ Suitable for use on systems with up to200,000A available fault current,RMS symmetrical when equipped withClass J or Class L fuses▪ Group mounts with other 30A through600A switches, and 100 through 1200amp frame breakers▪ Allows 800A and 1200A switches instandard 38" wide distribution sectionsin either main or branch configurations▪ 16 1 ⁄4" mounting height is the smallest1200A design in the industry, allowingup to 4 units in one vertical section▪ Field reversible horizontal mountingdesign for left or right hand cabling▪ Handle can be padlocked in the OFFposition with up to three padlocks with5/16" hasps. A cover padlockingprovision is also suppliedSelection3-Pole, Horizontal Mount Horsepower RatingMaximum MaximumCatalog Ampere AC Voltage FuseDimensions (inches*) 240V 480V 600V250V ListNumber Rating Rating Class H W D Std Max Std Max Std Max DC Price $HCP367HJ400 1400 600 J 16.25 17.22 7.38 150 125 100 250 125 350 40 5117.00HCP367HJ600 1600 600 J 16.25 17.22 7.38 175 200 150 400 200 400 40 5751.00HCP327HT 800 240 T 16.25 17.22 7.38 100 250 — — — — 50 11366.00HCP367H 1800 600 L 16.25 17.22 7.38 100 250 200 500 250 500 50 10724.00HCP328HT 1200 240 T 16.25 17.22 7.38 100 250 — — — — 50 12626.00HCP368H 1200 600 L 16.25 17.22 7.38 100 250 200 500 250 500 50 10998.003-Pole, Vertical MountHCP367VJ400 1400 600 J 17.00 16.25 7.38 150 125 100 250 125 350 40 5117.00HCP367VJ600▲ 1600 600 J 17.00 16.25 7.38 175 200 150 400 200 400 40 5751.00HCP327VT 800 240 T 17.00 16.25 7.38 100 250 — — — — 50 11366.00HCP367V 1800 600 L 17.00 16.25 7.38 100 250 200 500 250 500 50 10724.00HCP328VT 1200 240 T 17.00 16.25 7.38 100 250 — — — — 50 12626.00HCP368V 1200 600 L 17.00 16.25 7.38 100 250 200 500 250 500 50 10998.00AccessoriesTerminal Connectors (one lug per kit)Ampere Catalog Connector ListRating Number Wire Range Price $400–600A TA2K500 (2) #1 AWG–500 kcmil (Cu or AI) 71.00400–600A TC2K500 (2) #1 AWG–500 kcmil (Cu only) 120.00400–800A TA3K500 (3) #1 AWG–500 kcmil (Cu or AI) 98.00400–800A TC3K350 (3) #1 AWG–350 kcmil (Cu only) 151.00800-1200A TA4H500 (4) #2 AWG–500 kcmil (Cu or AI) 182.00800-1200A TA3H750 (3) 250–750 kcmil (Cu or AI) 278.00Auxiliary Switch KitsMaximumContactAmpereVoltageSwitch Catalog ListRating AC DC Mounting Contacts Number Price $15A 480 125 Left Pole 1NO/1NC A01HCPL4▲ 361.0015A 480 125 Right Pole 1NO/1NC A01HCPR4 361.00Shunt Trip KitControl VoltageCatalog ListAC DC Number Price $120 — HCPST120 798.00240 — HCPST240▲ 798.00277 — HCPST277 798.00480 — HCPST480▲ 798.00— 148 HCPST48▲ 798.00— 125 HCPST125▲ 798.00Switchboard Connection Strap Kit Switch Catalog ListAmpere Rating Number Price $400–1200A F6162D 1366.00*For inches / millimeters conversion, multiply inches by25.4.▲ Built to order. Allow 6–8 weeks for delivery. For horizontal mounting only in either 38" wide minswitchboards or S5/F2 power panelboards.T Fuse Adapter Kits (one per pole)CatalogListNumber Description Price $TFAK72 1800A, 300V AC 214.00TFAK75 1800A, 600V AC 238.00TFAK82 1200A, 300V AC 543.00Compression Lug Adapter KitThe use of this kit provides for themounting of up to four lugs per phase.Each kit accepts lugs with (2) 3/8"diameter mounting holes on 1" centers.One kit per pole line or load is required.Lugs are not provided.Ampere Catalog ListRating Number Price $400–1200A HCPCLP 274.00 Both 240 and 600V AC switches are also rated 250V DCmax.4-22Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule VBSS

Disconnect SwitchesType HCP Switchboard UnitsDimensions4 DISCONNECTSWITCHESSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog4-23

Disconnect SwitchesType TFP Fusible PulloutsSelection/DimensionsFeaturesType TFP Fusible Pullouts▪ 100 and 200 Ampere Disconnects▪ 240 Volt and 600 Volt Designs▪ Class T Fuses▪ Factory Installed Wire Connectors▪ U.L. Listed for applications up to200,000 Amps symmetrical at600 Volts▪ Physically interchangeable withSiemens Type QJ2, QJH2and QJ2-H▪ UL 1429, File No. E118778DISCONNECTSWITCHES4T-Fuse Pullouts2-Pole, 2-FuseT-Fuse PulloutTFP223Maximum Ampere Catalog Connector ListVoltage Rating Number Wire Range Price $240 100 TFP223 (1 pc.) #6-300 kcmil Cu 540.00200 TFP224 (1 pc.) #4-300 kcmil Al 726.003-Pole, 3-Fuse240 100 TFP323 652.00200 TFP324 (1 pc.) #6-300 kcmil Cu 873.00600100 TFP363 (1 pc.) #4-300 kcmil Al 807.00200 TFP364 1103.00Fuses — Not included. Consult local sales office for replacement parts.Fusible Pullouts Dimensions (inches*)Class T Pullout Mounting HardwareCatalog Number MSQJ (Includes 4 screws)For inches / millimeters conversion, multiply inches by 25.4. Replacement terminal lug Catalog Number TA1Q300. 240 bolt pullouts require 300 volt Class T fuses.4-24 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule HDSS

5SPEEDFAX TM 2007-2008 Enclosed Circuit BreakersContentsEnclosure Types 5-2Complete AssembliesMolded Case Circuit Breakers 5-3 – 5-6Enclosed Molded Case Switches 5-7EnclosuresType 1, Selection 5-8Type 1, Dimensions 5-9Type 3R, Selection 5-10Type 3R, Dimensions 5-11Types 4, 4X, 7 and 9, Selection/Dimensions 5-12Types 5, 12 and 12K, Selection/Dimensions 5-13Knockout and Hub Data 5-145 ENCLOSEDCIRCUIT BREAKERSResidential Commercial Industrial

Enclosed Circuit BreakersEnclosure TypesGeneralType 3RType 1ENCLOSEDCIRCUIT BREAKERS5Types 7, 9Types 5, 12, 12KType 1 — A general indoor, sheet-steelenclosure for use in normalatmospheres. Listed as serviceentrance equipment.Type 3R — An outdoor, sheet-steelenclosure providing protection againstdriving rain, sleet or snow. Listed asservice entrance equipment.Types 7, 9 — Cast aluminum enclosureclassified for explosion and fire hazard.Only enclosure for use in hazardouslocation. Class I; Group D–Class II;Groups E, F, and G–Class III.Types 4, 4X (not shown) — Stainlesssteel indoor or outdoor enclosuredesigned for use in areas where seriouscorrosion problems exist. They provide adegree of protection against windblowndust, rain, splashing water and hosedirectedwater. Meets NEMA Type 3, 4,4X, 12 and 13 requirements and UL 508Type 4 and 4X requirements.Types 5, 12 — A special-industry, sheetsteelenclosure for use in atmospherescontaining particles of lint, dust, dirt,sawdust and other foreign matter.Type 12K — A semi-dusttight sheetsteelenclosure. Listed as serviceentrance equipment.5-2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Enclosed Circuit BreakersComplete Assemblies—Molded Case Circuit BreakersSiemens Enclosed Circuit BreakerComplete Assemblies consist of a thermalmagnetic molded case circuit breakerframe, trip unit, enclosure and standardline and load pressure wire connectors —assembled and shipped as one unit fromthe Siemens modification center. Forservice equipment or applicationsCatalog Numberingrequiring a solid neutral, neutrals must bepriced and ordered separately except asnoted.To order, select the appropriate prefixfrom the table below and place it in frontof the desired non-interchangeable trip orinterchangeable trip circuit breaker catalogSelectionnumber. For circuit breaker selection,refer to pages 6-20 thru 6-124.Note: Lead times are determined basedon availability of components.Items marked with ■ or ▲ in thissection may contain componentsthat are not normally stocked.PrefixEnclosure TypeE1SType 1 SurfaceE1FType 1 FlushE3RType 3RE12 Type 12E4XType 4X Stainless SteelExample:Catalog number E1SJD63B400 consists of:(1) JD63F400 frame(1) JD63T400 trip unit(1) J6N1 enclosure(6) TA2J6500 wire connectorsSelection And Pricing By Enclosure TypeCircuit Breaker List Price $ — Complete Assembly NeutralsType 1LugNumber Surface CatalogBreaker of Ampere or Type Type Type Number Catalog ListFrame Poles Rating Flush 3R 12 4, 4X (included) Number Price $QJ2QJH22 60-225 648.00 840.00 NA NA3 60-225 1332.00 1565.00 NA NA2 60-225 1236.00 1428.00 NA NA3 60-225 1774.00 2007.00 NA NATA1Q300TA1Q300Included withenclosureQJ2-H2 60-225 1481.00 1673.00 NA NA3 60-225 2190.00 2423.00 NA NATA1Q3002 15-60 437.00 698.00 542.00 3129.00ED22 70-100 619.00 880.00 724.00 3311.003 15-60 577.00 838.00 682.00 3269.003 70-100 762.00 1023.00 867.00 3454.00 15-25A2 15-60 670.00 931.00 775.00 3362.00 SA1E0252 70-100 835.00 1096.00 940.00 3527.00 30-60A2 110-125 1657.00 2111.00 1835.00 4227.00 Line LN1E100 Catalog NumberED43 15-60 833.00 1094.00 938.00 3525.00 Load LD1E060 W530453 70-100 953.00 1214.00 1058.00 3645.00 included with70-1003 110-125 1865.00 2319.00 2043.00 4435.00enclosureLN1E1002 15-60 762.00 1023.00 867.00 3454.00 110-125A2 70-100 922.00 1183.00 1027.00 3614.00 TA1E6125ED6 3 15-60 927.00 1188.00 1032.00 3619.003 70-100 1122.00 1383.00 1227.00 3814.003 110-125 2143.00 2597.00 2321.00 4713.005 ENCLOSEDCIRCUIT BREAKERSDiscount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog5-3

Enclosed Circuit BreakersComplete Assemblies—Molded Case Circuit BreakersSelection And Pricing By Enclosure TypeSelectionCircuit Breaker List Price $ — Complete Assembly NeutralsType 1LugNumber Surface CatalogBreaker of Ampere or Type Type Type Number Catalog ListFrame Poles Rating Flush 3R 12 4, 4X (included) Number Price $2 15-60 1078.00 1339.00 1183.00 3770.002 70-100 1219.00 1480.00 1324.00 3911.00HED42■ 110-125 2447.00 2901.00 2625.00 5017.00 Refer to3 15-60 1289.00 1550.00 1394.00 3981.00 page 6-81 Catalog Number3 70-100 1376.00 1637.00 1481.00 4068.00W530453 110-125 2781.00 3235.00 2959.00 5351.00included with2■ 15-100 3027.00 3481.00 3205.00 NAenclosureCED62■ 110-125 4406.00 4860.00 4584.00 NA Refer to3 15-100 3471.00 3925.00 3649.00 NA page 6-813■ 110-125 5156.00 5610.00 5334.00 NA5ENCLOSEDCIRCUIT BREAKERSCircuit Breaker List Price $ — Complete Assembly Neutrals (not included)LugNumber Type 1 CatalogBreaker of Ampere Surface or Type Type Type Number Catalog ListFrame Poles Rating Flush 3R 12 4, 4X (included) Number Price $70-225 2081.00 2503.00 2307.00 6617.002■250 3343.00 3765.00 3569.00 7879.00FXD6,FD670-225 2599.00 3021.00 2825.00 7135.003250 3898.00 4320.00 4124.00 8434.0070-225 4341.00 4763.00 4567.00 8877.002■250 5603.00 6025.00 5829.00 10139.00HFD6TA1FD350A N250 143.00■ 70-225 5242.00 5660.00 5464.00 9774.003250 6537.00 6959.00 6763.00 11073.00CFD63■70-225 6663.00 7085.00 6889.00 NA250 7369.00 7791.00 7595.00 NAJXD22■ 200-400 2930.00 4065.00 3397.00 9618.003 200-400 3541.00 4676.00 4008.00 10229.00JXD6, 2■ 200-400 3568.00 4703.00 4035.00 10256.00JD6 3 200-400 4211.00 5346.00 4678.00 10899.00HJD62■ 200-400 5684.00 6819.00 6151.00 12372.00 TA2J6500 W60992 492.003 200-400 6796.00 7931.00 7263.00 13484.002■ 200-400 6781.00 7916.00 7248.00 13469.00HHJD63■ 200-400 8099.00 9234.00 8566.00 14787.00CJD6 3■ 200-400 8805.00 9974.00 9335.00 NA■ Built to order. Allow 2–3 weeks for delivery.CSO – Consult Sales Office for pricing Order catalog number W60993 neutral for type 4,4X enclosure or when a 200% neutral is required. For 200% neutral order catalog number N2250(List price $258.00)5-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Enclosed Circuit BreakersComplete Assemblies—Molded Case Circuit BreakersSelection And Pricing By Enclosure TypeSelectionCircuit Breaker List Price $ — Complete Assembly NeutralsLugNumberCatalogBreaker of Ampere Type 1 Type Type Type Number Catalog ListFrame Poles Rating Surface 3R 12 4, 4X (included) Number Price $LXD6, 2■ 450-600 5469.00 6638.00 5999.00 11966.00LD6 3 450-600 6740.00 7909.00 7270.00 13237.00HLD6, 2■ 250-600 7012.00 8181.00 7542.00 13509.00HLXD6 3 250-600 8798.00 9967.00 9328.00 15295.00 TA2J6500 W60993 436.00HHLXD6 , 2■ 450-600 8863.00 9802.00 9163.00 15130.00HHLD6 3■ 450-600 10363.00 11532.00 10893.00 16860.00CLD6 3■ 450-600 13683.00 14852.00 14213.00 NALMXD6, 2■ 500-800 CSO CSO CSO NALMD6 3■ 500-800 CSO CSO CSO NAHLMXD6 , 2■ 500-800 CSO CSO CSO NAHLMD6 3■ 500-800 CSO CSO CSO NAMXD6, 2■ 500-800 7436.00 8741.00 9422.00 NA TA3K500 W63623 606.00MD6 3■ 500-800 9245.00 10550.00 11231.00 NAHMXD6 , 2■ 500-800 8707.00 10012.00 10693.00 NAHMD6 3■ 500-800 10909.00 12214.00 12895.00 NACMD6 3■ 500-800 15431.00 16736.00 17417.00 NA5 ENCLOSEDCIRCUIT BREAKERS■ Built to order. Allow 2–3 weeks for delivery.CSO – Consult Sales Office for pricing For 200% neutral in Type 1, 3R & 12 enclosures useneutral catalog number W63623. For applications requiring 600MCM neutral conductors(max. 3 in & 3 out) use neutral catalog number W411239(List price $667.00). HHLXD6, HLMXD6 and HMXD6 are only available with3-pole breakers.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog5-5

5ENCLOSEDCIRCUIT BREAKERSEnclosed Circuit BreakersComplete Assemblies—Molded Case Circuit BreakersSelection And Pricing By Enclosure TypeSelectionCircuit Breaker List Price $ — Complete Assembly NeutralsLugNumberCatalogBreaker of Ampere Type 1 Type Type Type Number Catalog ListFrame Poles Rating Surface 3R 12 4, 4X (included) Number Price $NXD62■ 900-1200 CSO CSO CSO NA3 900-1200 CSO CSO CSO NA2■ 800 CSO CSO CSO NA TA3K5002■ 900-1200 CSO CSO CSO NA for 800AND63 800 CSO CSO CSO NA2TA4N85003 900-1200 CSO CSO CSO NAfor 900-1200AHNXD6 3 900-1200 CSO CSO CSO NA 2-Pole W63623 606.002■ 800 CSO CSO CSO NAHND62■ 900-1200 CSO CSO CSO NA 3TA4N85003 800 CSO CSO CSO NAfor 900-1200A3-Pole3 900-1200 CSO CSO CSO NACND6 3■ 900-1200 CSO CSO CSO NAPXD6 3■ 1200-1600 CSO CSO NA NA TA5P600PD6 3■ 1200-1600 CSO CSO NA NA TA5P600HPXD6 3■ 1200-1600 CSO CSO NA NA TA5P600HPD6 3■ 1200-1600 CSO CSO NA NA TA5P600CPD6 3■ 1200-1600 CSO CSO NA NA TA5P600 N2000 1056.00RXD6 3 1600-2000 CSO CSO NA NA TC5R600RD6 3■ 1600-2000 CSO CSO NA NA TC5R600HRXD6 3■ 1600-2000 CSO CSO NA NA TC5R600HRD6 3■ 1600-2000 CSO CSO NA NA TC5R600Special Application Complete Enclosures with Ground Fault ProtectionThe following assemblies are suitablefor use as service entrance devices onservices which require ground faultprotection.Selection And Pricing By Enclosure TypeCircuit Terminal NeutralBreaker Ampere Catalog List Catalog List Breaker Connector Neutral SensorType Rating Number Price $ Number Price $ Installed Installed Installed InstalledSND6 w/ground fault■1000A E1SSND69100GN 18904.00 E3RSND69100GN 20209.00 SND69100AG 3TA4N8500 W63623 N10SNDA1200A E1SSND69120GN 18904.00 E3RSND69120GN 20209.00 SND69120AG 3TA4N8500 W63623 N12SNDASHND6 w/ground fault■1000A E1SSHND69100GN 20365.00 E3RSHND69100GN 21670.00 SHND69100AG 3TA4N8500 W63623 N10SNDA1200A E1SSHND69120GN 20365.00 E3RSHND69120GN 21670.00 SHND69120AG 3TA4N8500 W63623 N12SNDA■ Built to order. Allow 2–3 weeks for delivery.CSO – Consult Sales Office for pricing Not assembled — components shipped separately.Includes connect-all mounting assemblyCatalog Number MB9301. For applications requiring 600MCM neutral conductors(max. 3 in & 3 out) use neutral catalog number W411239(List price $667.00).5-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Enclosed Circuit BreakersComplete Assemblies—Molded Case Circuit SwitchesSelection And Pricing By Enclosure TypeSelectionMolded Case Switch Enclosure Type — List Price $ NeutralsType 1LugNumber Surface CatalogBreaker of Ampere or Type Type Type Number Catalog ListFrame Poles Rating Flush 3R 12 4, 4X (included) Number Price $QJ2ED2ED4ED6CED62■ 225 648.00 840.00 NA NAIncluded withTA1Q3003 225 1332.00 1565.00 NA NA enclosure2■ 100 619.00 880.00 724.00 3311.00 Refer to3 100 762.00 1023.00 867.00 3454.00 page 6-812■100 835.00 1096.00 940.00 3527.00125 1657.00 2111.00 1835.00 4227.00 Refer to3Catalog Number125 1865.00 2319.00 2073.00 4435.00 W53045100 953.00 1214.00 1058.00 3645.00 page 6-812■100 847.00 1183.00 1027.00 3614.00 included withenclosure125 NA NA NA NA Refer to3100 1122.00 1383.00 1227.00 3814.00 page 6-81125 2143.00 2597.00 2321.00 4713.002■1001253027.004406.003481.004860.003205.004584.00NANA Refer to3■100 3471.00 3925.00 3649.00 NA page 6-81125 5156.00 5610.00 5334.00 NAMolded Case Switch Enclosure Type — List Price $ Neutrals (not included)LugNumberCatalogBreaker of Ampere Type 1 Type 1 Type Type Type Number Catalog ListFrame Poles Rating Surface Flush 3R 12 4, 4X (included) Number Price $FXD62 250 3343.00 3343.00 3765.00 3569.00 7879.003 250 3898.00 3898.00 4320.00 4124.00 8434.00 TA1FD350A N250 143.00CFD6 3■ 250 7369.00 7369.00 7791.00 7595.00 NAJXD22■ 400 2930.00 NA 4065.00 3397.00 9618.003 400 3541.00 NA 4676.00 4008.00 10229.00TA2J6500 W60992 492.00JXD6 3 400 4211.00 NA 5346.00 4678.00 10899.00 TA2J6500 W60992 492.00CJD6 3■ 400 8805.00 NA 9974.00 9335.00 NA TA2J6500 W60992 492.00LXD6 3 600 6740.00 NA 7909.00 7270.00 13237.00 TA2J6500 W60993 436.00CLD6 3■ 600 13683.00 NA 14852.00 14213.00 NA TA2J6500 W60993 436.00MXD6 3 800 9245.00 NA 10550.00 11231.00 NACMD6 3■ 800 CSO NA NA CSO NANXD6 3 1200 CSO NA NA CSO NACND6 3■ 1200 CSO NA NA CSO NATA3K500 W63623 606.003TA4N8500 W63623 606.00PXD6 3■ 1600 CSO NA NA NA NA TA5P500 N2000 1056.00RXD6 3■ 2000 CSO NA NA NA NA TC5R600 N2000 1056.005 ENCLOSEDCIRCUIT BREAKERS■ Built to order. Allow 2–3 weeks for delivery.CSO – Consult Sales Office for pricingNot assembled — components shipped separately.Includes connect-all mounting assembly CatalogNumber MB9301.Order Catalog Number W60993 neutral for Type 4,4X enclosure or when a 200% neutral is required.For 200% neutral order catalog number N2250 (List price$258.00)For 200% neutral in Type 1, 3R & 12 enclosures useneutral catalog number W63623.For applications requiring 600 MCM neutral conductors(Max. 3 in and 3 out) use neutral catalog numberW411239 (List price $667.00).Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog5-7

Enclosed Circuit BreakersEnclosures — Type 1DimensionsSelectionFigure 1 Figure 2 Figure 3Type 1K.O. DimensionsNumber MaximumWeightFig. Breaker of Current Catalog List Lb./Ship.Dimensions (inches) 6 Plcs. 2 Plcs.No. Frame Poles Rating Number Price $ Package A B C D E F G H5ENCLOSEDCIRCUIT BREAKERS111QP, QPH,HQPQP, QPH,HQPBQ, BQH,HBQ1–2 0060 E0204ML1060S 76.00 016 07 1 ⁄8 05 1 ⁄8 03 3 ⁄8 05 3 ⁄4 03 3 ⁄4 1 1 ⁄16 — —330 100 E0303ML3100S0 100 EB3100S189.00NGG 2-3 125 GG0121FN/SN 139.0000 8 171 ⁄8189.00 0 32 17 1 ⁄8071 ⁄8071 ⁄8041 ⁄4 14 1 ⁄8043 ⁄4 14 1 ⁄8041 ⁄2 1 5 ⁄16 — —041 ⁄2 1 5 ⁄16 — —2ED2, ED4, ED6,0 E2N1S 149.00 008 162–3 100 23 ⁄32 07 1 ⁄2 05 1 ⁄16 13 45 ⁄64 05 1 ⁄4 1 7⁄8, 1 1 ⁄8,7⁄8, 1 1 ⁄8,HED4 E2N1F 149.00 008 17 1 ⁄2 08 1 ⁄2 05 1 ⁄16 13 45 ⁄64 05 1 ⁄4 11 3 ⁄8, 1 3 ⁄8,2ED4, ED6, HED4,0 CED6N1S2–3271.00 014 21 125 15 ⁄32 07 19 ⁄32 05 7 ⁄64 18 1 ⁄4 05 1 ⁄4 1CED6 CED6N1F 271.00 014 22 1 ⁄4 08 1 ⁄2 05 7 ⁄64 18 1 ⁄4 05 1 ⁄4 11 3 ⁄4, 2 1 3 ⁄4, 22FXD6, FD6, FXD6, 1 1 ⁄8, 1 3 ⁄8, 1 1 ⁄8, 1 3 ⁄8,FD6, HFD6, HFXD6, 2–3 0250 F6N1S 184.00033 38 13 ⁄32 11 15 ⁄32 05 1 ⁄16 33 08 1 33 ⁄64 1 3 ⁄4, 2, 1 3 ⁄4, 20,HHFD6, CFD6 F6N1F 184.00 2 1 ⁄2, 3 2 1 ⁄2, 3JXD2, JD6,JXD6, HJD6,3 HJXD6, HHJD6, 2–3 0400 J6N1 258.00 120 41 3 ⁄16 22 27 ⁄64 10 45 ⁄64 37 18 1 ⁄4 2 5 ⁄64 — —HHJXD6, SJD6,SHJD6LD6, LXD6,HLD6, HLXD6,3 HHLD6, HHLXD6, 2–3 0600 LD6N1 449.00 101 46 22 27 ⁄64 10 45 ⁄64 42 18 1 ⁄4 2 5 ⁄64 — —SLD6, SHLD6,SCJD6, SCLD6,CJD6, CLD63LMXD6, LMD6,HLMXD6, HLMD62–30 800 LMD1897.00 202 60 22 27 ⁄64 10 55 7 ⁄8 18 1 ⁄4 2 5 ⁄64 — —3MD6, MXD6, SMD6, HMD6, HMXD6,SHMD6, ND6, NXD6,SND6, HND6, HNXD6,2–3 1200 MND61 897.00 202 60 22 27 ⁄64 10 55 7 ⁄8 18 1 ⁄4 2 5 ⁄64 — —SHND6, CMD6,SCMD6, CND6, SCND6PD6, PXD6, HPD6,—HPXD6, CPD6, RD6,SPD6, SHPD6, RXD6,3 2000 PRD6N1■ 6324.00 350 90 32 28 — — — — —HRD6, HRXD6For inches / millimeters conversion,see Application Data section.■ Built to order. Allow 2–3 weeks for delivery.CSO – Consult Sales Office for pricingSurface mounted, indoor. If flush mounting is required,replace suffix “S” in catalog number with suffix “F”.Also, if outdoor model required, use prefix “W”instead of “E”.Discount Schedule B.Does not include circuit breaker. Order circuitbreaker separately.Neutral not included. Order as separate item from tableon next page.Neutral included in enclosure.Surface mounted, indoor. If outdoor model is required,use prefix “W” instead of “E”. Not available in flush(“F”) model.Use for 110-125 ampere ED4, ED6, or HED4circuit breakers.Will not accept breaker with shunt trip.Will not accept 2-pole GFP or breaker with shunt trip. Includes 100% rated breakers. Enclosure will accept shunt trip and other internalaccessories except GFP.5-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Enclosed Circuit BreakersEnclosures — Type 1DimensionsSelectionFigure 4Number Maximum WeightFigure Breaker of Current Catalog List Lb./Ship.Dimensions (inches)Number Frame Poles Rating Number Price $ Package A B C D E F G H J K L M N PQJ2, QJH2,EB3225S 226.00 27 1042–3 225151 ⁄8 27 10 1 ⁄8 5 1 ⁄4 2 13 ⁄16 21 3 ⁄8 2 3 ⁄8 3 20 5 1 ⁄16 2 3 ⁄4 2 3 ⁄4 4 1 ⁄2QH2-H EB3225F 226.00 27 10 1 ⁄8 28 1 ⁄8 11 1 ⁄4 5 1 ⁄4 2 13 ⁄16 21 3 ⁄8 2 3 ⁄8 3 20 5 1 ⁄16 2 3 ⁄4 2 3 ⁄4 4 1 ⁄2NeutralsNeutralEnclosureCatalog Catalog Neutral Cable Capacity ListNumber Number and Wire Range Price $E2N1(S)(F)W53045 (1 pc.) #14–2 Cu/AlCED6N1(S)(F) Grd. Lug (1 pc.) #14–8 Cu/Al186.00N250F6N1(S)(F)(1 pc.) #6–350 kcmil Cu/AlGrd. Lug (1 pc.) #14–2/0 Cu/Al143.00(1 pc.) #1/0–750 kcmil Cu/Al orW60992 J6N1 (2 pcs.) #1/0–300 kcmil Cu/Al 492.00Grd. Lug (1 pc.) #6–250 kcmil Cu/AlW60993LD6N1(2 pcs.) #1/0–600 kcmilGrd. Lug (1 pc.) #6–250 kcmil Cu/Al436.005 ENCLOSEDCIRCUIT BREAKERSW63623N2000LMD1 (4 pcs.) 250 kcmil–500 kcmil Cu/Al 606.00MND61Grd. Lug (1 pc.) #6–300 kcmil Cu/Al(6 pcs.) #3/0–750 kcmil Cu/AlPRD6N11056.00Grd. Lug (2 pcs.) #3/0–750 Cu/Al200% Neutrals (For Type 1, 3R, 4/4X and 12 Enclosures)NeutralEnclosureCatalog Catalog Neutral Cable Capacity ListNumber Number and Wire Range Price $N2250 F6N1(S)(F) (2 pcs.) #4–350 kcmil Cu/Al Grd. Lug (1 pc.) #14–2/0 Cu/Al258.00W60993 J6N1 (2 pcs.) #1/0–600 kcmilGrd. Lug (1 pc.) #6-250 kcmil Cu/Al436.00W63623 LD6N1 (4 pcs.) 250 kcmil–500 kcmil Cu/AlGrd. Lug (1 pc.) #6–300 kcmil Cu/Al606.00For inches / millimeters conversion,see Application Data section.CSO – Consult Sales Office for pricingSurface mounted, indoor. If flush mounting is required,replace suffix “S” in catalog number with suffix “F”.Also, if outdoor model required, use prefix “W”instead of “E”.Discount Schedule B.Does not include circuit breaker. Order circuitbreaker separately.Neutral not included. Order as separate item from tableon next page.Neutral included in enclosure.Surface mounted, indoor. If outdoor model is required,use prefix “W” instead of “E”. Not available in flush(“F”) model.Use for 110-125 ampere ED4, ED6, or HED4circuit breakers.Will not accept breaker with shunt trip.Also for use with Type 3R, 12, 12K & 4X enclosures(Catalog numbers F6N3R, F6N12, F6N12K & FD6SS4).Also for use with Type 3R, 12 & 4X enclosures (Catalognumbers J6N3R, J6N12, & LD6SS4).Also for use with Types 3R and 12 enclosures (Catalognumbers LD6N3R & LD6N12).For 600 MCM neutral cable (3) in, (3) out (#4–600 kcmilCu/Al) use catalog number W411239 (List price $667.00)Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog5-9

Enclosed Circuit BreakersEnclosures — Type 3RSelectionFigure 1 Figure 2 Figure 3Type 3RNumber Maximum WeightFigure Breaker of Current Catalog List Lb./Ship.Dimensions (inches)Number Frame Poles Rating Number Price $ Package A B C D E F G H2 QP, QPH 1–2 0060 W0204ML1060 141.00 028 08 1 ⁄8 05 1 ⁄8 04 3 ⁄8 — — — — —5ENCLOSEDCIRCUIT BREAKERS2 QPP, QPPH, HQPP 1–4 0225 W0406ML1225CU 396.00 024 23 1 ⁄8 10 1 ⁄2 04 5 ⁄16 20 07 1 ⁄2 1 15 ⁄16 05 1 ⁄4 —225QP, QPH,HQPBQ, BQH, 3 0050HBQ 3 10030 100 W0303ML3100249.00 00 9 171 ⁄8WB3100 249.00 00 9 171 ⁄8NGG 2-3 125 GG0123RN 377.00ED2, ED4, ED6,HED4, HED62–30 100 E2N3R410.000 12 179 ⁄16073 ⁄8073 ⁄8071 ⁄4045 ⁄16 14 1 ⁄8045 ⁄16 14 1 ⁄8051 ⁄4 12 39 ⁄64041 ⁄2 1 1 ⁄8041 ⁄2 1 1 ⁄8051 ⁄4 10 311⁄16 —0 311⁄16 —0 3 —5 CED6 2–3 0125 CED6N3R 725.00 016 22 21 ⁄64 07 1 ⁄4 05 1 ⁄4 17 3 ⁄8 05 1 ⁄4 1 03 —FXD6, FD6, FXD6,1 FD6, HFD6, HFXD6, 2–3 0250 F6N3R 606.00 045 38 1 ⁄8 14 1 ⁄16 07 3 ⁄4 33 9 ⁄32 08 5 13 ⁄16 13 1 ⁄2 5 13 ⁄16HHFD6, CFD6JXD2, JD6,JXD6, HJD6,1 HJXD6, HHJD6, 2–3 0400 J6N3R 1393.00 126 40 63 ⁄64 26 3 ⁄4 11 23 ⁄32 35 3 ⁄4 18 1 ⁄4 2 1 ⁄8 24 1 ⁄2 1 1 ⁄8HHJXD6, SJD6,SHJD6LD6, LXD6,LXD6H, HLD6,1HLXD6, HHLD6,HHLXD6, CJD6,2–30 600 LD6N3R1618.00 137 45 63 ⁄64 26 3 ⁄4 11 23 ⁄32 40 3 ⁄4 18 1 ⁄4 2 1 ⁄8 24 1 ⁄2 1 1 ⁄8CLD6, SCJD6,SLD6, SHLD64LMXD6, LMD6,HLMXD6, HLMD62–30 800 LMD3R2202.00 210 61 9 ⁄64 26 3 ⁄4 11 23 ⁄32 57 17 ⁄32 18 1 ⁄4 2 1 ⁄8 24 5 ⁄8 1 1 ⁄16MD6, MXD6, SMD6, HMD6, HMXD6,SHMD6, ND6, NXD6,1 SND6, HND6, HNXD6, 2–3 1200 MND63 2202.00 210 61 9 ⁄64 26 3 ⁄4 11 23 ⁄32 57 17 ⁄32 18 1 ⁄4 2 1 ⁄8 24 5 ⁄8 1 1 ⁄16SHND6, CMD6, SCMD6,CND6,SCND6For inches / millimeters conversion,see Application Data section.Discount Schedule B.Does not include circuit breaker.Order circuit breaker separately.Neutral not included. Order as separate item from tableon next page.Neutral included in enclosure.Will not accept breaker with shunt trip.Will not accept 2 pole GFP or breaker with shunt trip.Includes 100% rated breakers.5-10Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Enclosed Circuit BreakersEnclosures — Type 3RDimensionsSelection / DimensionFigure 4 Figure 5Number Maximum WeightFigure Breaker of Current Catalog List Lb./Ship.Dimensions (inches)Number Frame Poles Rating Number Price $ Package A B C D E F G H J K L MQJ2, QJH2, 2 225 WB2225 418.00 17 27 5 07 11 ⁄16 2 1 ⁄4 2 2 7 ⁄8 20 4 1 ⁄8 3 5 ⁄8 2 3 ⁄4 2 3 ⁄4 —6QJ2-H 3 225 WB3225 459.00 17 27 5 5 ⁄8 10 3 ⁄8 2 1 ⁄4 2 2 7 ⁄8 20 4 1 ⁄8 5 1 ⁄8 2 3 ⁄4 2 3 ⁄4 4 1 ⁄2Neutrals NeutralEnclosureCatalog Catalog Neutral Cable Capacity ListNumber Number and Wire Range Price $E2N3R (1 pc.) #14–2 Cu/AlW53045 CED6N3R Grd. Lug (1 pc.) #14–8 Cu/Al186.00N250 (1 pc.) #6–350 kcmilF6N3RGrd. Lug (1 pc.) #14–2/0 Cu/Al143.00(1 pc.) #1/0–750 kcmil Cu/Al orW60992 J6N3R (2 pcs.) #1/0–300 kcmil Cu/Al 492.00Grd. Lug (1 pc.) #6–250 kcmil Cu/AlW60993 LD6N3R(2 pcs.) #1/0–600 kcmilGrd. Lug (1 pc.) #6–250 kcmil Cu/Al436.005 ENCLOSEDCIRCUIT BREAKERSLMD3R (4 pcs.) 250 kcmil–500 kcmil Cu/Al W63623606.00MND63Grd. Lug (1 pc.) #6–300 kcmil Cu/AlHubs — see page 5-14.For inches / millimeters conversion,see Application Data section.Discount Schedule B.Does not include circuit breaker. Order circuitbreaker separately.Neutral not included. Order as separate item from tableon next page.Neutral included in enclosure. Use CED enclosure for all ED-frame 110-125ampere units.200% neutrals are also available. See listing on page 5-9.For applications requiring 600MCM neutral conductors(3) in, (3) out (#4-600 kcmil Cu/Al) use neutral catalognumber W411239 (List price $667.00).Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog5-11

Enclosed Circuit BreakersEnclosures — Types 4, 4X, 7, and 9DimensionsSelection / DimensionsFigure 1Figure 2Figure 1Types 4 and 4X5ENCLOSEDCIRCUIT BREAKERSNumber Maximum WeightBreaker of Current Catalog List Lb./Ship.Dimensions (inches)Frame Poles Rating Number Price $ Package A B C D E FED2, ED4, ED6,HED43 125 ED6SS4 2841.00 044 20 16 06 07 5 ⁄32 09 3 ⁄4 3FXD6, FD6,HFD6, FXD6, FD62–3 250 FD6SS4 4720.00 106 36 24 08 09 5 ⁄32 11 3 ⁄4 3JXD2, JXD6, JD6,HJD6, HJXD6, HHJD6,HHJXD6, SJD6, SHJD6,LXD6, LD6, HLD6,2–3 600 LD6SS4■ 6946.00 145 42 30 10 11 5 ⁄32 13 3 ⁄4 3HLXD6, HHLD6, HHLXD6,SLD6, SHLD6NeutralsNeutralEnclosureCatalog Catalog Neutral Cable Capacity ListNumber Number and Wire Range Price $W53045 (1 pc.) #14–2 Cu/AlED6SS4Grd. Lug (1 pc.) #14–8 Cu/Al186.00N250 (1 pc.) #6–350 kcmilFD6SS4Grd. Lug (1 pc.) #14–2/0 Cu/Al143.00W60993 (2 pcs.) #1/0–600 kcmilLD6SS4Grd. Lug (1 pc.) #6–250 kcmil Cu/Al436.00Figure 2Types 7 and 9 Number Maximum WeightDimensions (inches)KnockoutsBreaker of Current Catalog List Lb./Ship.Mounting Inside Outside Conduit SizeFrame Poles Rating Number Price $ Package A B C D E F G H K Std. MaxED2, ED4,0 0015–60 EA■ 1750.00 027 51 ⁄2 13 1 ⁄8 515 0⁄16 10 3 ⁄4 5 7 ⁄16 97 ⁄16 14 1 ⁄4 6 5 ⁄8 1 5 ⁄8 1 1 ⁄4 1 1 ⁄4ED6,0 0 02–3 070–100 EB■ 2176.00 032 6 18 61 ⁄2 16 5 9 ⁄16 97 ⁄8 19 3 ⁄8 6 11 ⁄16 2 2 2HED4CED6 2–3 100 N/AFXD6, FD6, HFD6,HFXD6, CFD62–3 250 EC2■ 4815.00 085 10 1 ⁄4 22 5 ⁄8 11 3 ⁄4 20 6 1 ⁄2 15 3 ⁄8 23 7 ⁄8 8 1 ⁄4 2 3 ⁄4 2 1 ⁄2 2JXD2, JXD6,JD6, SJD6,200–350 EC4■ 4815.00 85 102–30 1 ⁄4 22 5 ⁄8 11 3 ⁄4 20 6 1 ⁄2 15 3 ⁄8 23 7 ⁄8 8 1 ⁄4 2 3 ⁄4 2 1 ⁄2 3HJD6, HJXD6, 300–400 EE■ 6662.00 93 08 0 1 ⁄2 27 1 ⁄8 10 3 ⁄4 24 1 ⁄8 7 3 ⁄4 13 7 ⁄8 27 1 ⁄4 9 9 ⁄16 4 3 4HHJD6, HHJXD6, SHJD6LXD6, LD6,SLD6, HLD6,HLXD6, HHLD6,2–3 600 ED6■ 11330.00 190 11 7 ⁄8 40 3 ⁄4 13 3 ⁄8 37 7 ⁄8 7 7 ⁄8 18 1 ⁄8 42 5 ⁄8 9 7 ⁄8 3 5 ⁄8 4 4HHLXD6, SHLD6For inches / millimeters conversion,see Application Data selection.■ Built to order. Allow 2–3 weeks for delivery.Does not include circuit breaker.Order circuit breaker separately.Enclosures shipped with handle and breaker hardwarepackaged within enclosure.Neutral included.Neutral not included. Order as separate item.Breather and drain option is by SPECIAL ORDER only —add $70.00 to list price.For 400A max. 4/4x applications which require a 200%Neutral. See listing on page 5-9. Suitable for use as Service Entrance device. Includes 100% rated breakers.5-12Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Enclosed Circuit BreakersEnclosures — Types 5, 12 and 12KTypes 5, 12 and 12KSelection / DimensionsNumber Maximum WeightFigure Breaker of Current Catalog List Lb./Ship.Dimensions (inches)Number Frame Poles Rating Number Price $ Package A B C D E F2NGG 2–3 125 GG01212N 233.00ED2, ED4, ED6,HED42–3 0100 E2N12 254.00 012 18 5 ⁄8 08 11 ⁄32 07 1 ⁄16 18 06 1 ⁄161 CED6 2–3 0125 CED6N12 ■ 449.00 016 22 5 ⁄8 08 11 ⁄32 07 1 ⁄16 22 06 1 ⁄16233FXD6, FD6, FXD6,FD6, HFD6, CFD6JXD2, JD6, JXD6,HJD6, HJXD6,HHJD6, HHJXD6, SJD6,SHJD6LD6, LXD6, HLD6,HLXD6, HHLD6, HHLXD6,SLD6, SHLD6, CJD6,CLD6, SCJD6, SCLD62–3 0250 F6N12 410.00 040 38 19 ⁄32 14 29 ⁄64 08 1 ⁄8 34 132–3 0400 J6N12 725.00 104 41 1 ⁄2 21 5 ⁄8 11 7 ⁄8 37 5 ⁄32 20 3 ⁄82–3 0600 LD6N12■ 979.00 104 46 1 ⁄2 21 5 ⁄8 11 7 ⁄8 42 5 ⁄32 20 3 ⁄84LMXD6, LMD6,HLMXD6, HLMD62–3 0800 LMD12■ 2883.00 220 — — — — — —MD6, MXD6, SMD6,HMD6, HMXD6, SHMD6,4 ND6, NXD6, SND6, HND6, 2–3 1200 MND612 ■ 2883.00 220 60 37 3 ⁄8 10 00 5 ⁄8 3 2HNXD6, SHND6, CMD6,SCMD6, CND6, SCND61⁄25⁄823⁄325⁄85⁄8Dimensions5 ENCLOSEDCIRCUIT BREAKERSFigure 2 Figure 3Figure 1NeutralsNeutralEnclosureCatalog Catalog Neutral Cable Capacity ListNumber Number and Wire Range Price $E2N12W53045 (1 pc.) #14–2 Cu/AlCED6N12 (1 pc.) #14–2 Cu/AlN250 F6N12(1 pc.) #6–350 kcmilGrd. Lug (1 pc.) #14–2/0 Cu/Al(1 pc.) #1/0–750 kcmil Cu/Al orW60992 J6N12 (2 pc.) #1/0–300 kcmil Cu/AlGrd. Lug (1 pc.) #6–250 kcmil Cu/AlW60993 L6N12(2 pcs.) #1/0–600 kcmilGrd. Lug (1 pc.) #6–250 kcmil Cu/AlLMD612W63623 (4 pcs.) 250 kcmil–500 kcmil Cu/AlMND612Grd. Lug (1 pc.) #6–300 kcmil Cu/Al186.00143.00492.00436.00606.00Figure 4For inches/millimeters conversion, see Application Data section.■ Built to order. Allow 2–3 weeks for delivery.CSO – Consult Sales Office for pricing.Catalog Number is for Type 12. If Type 12K with knockoutsis required, add suffix “K” to catalog number.Does not include circuit breaker.Order circuit breaker separately.Neutral not included. Order as separate item.Neutral included in enclosure.Use CED enclosure for all ED-frame 110–125ampere units.200% neutrals are also available. See listing on page 5-9.For 600 MCM neutral cable (3) in, (3) out (#4-600 kcmilCu/Al) use catalog number W411239 (List price $667.00) Includes 100% rated breakers.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog5-13

Enclosed Circuit BreakersEnclosures — Knockout and Hub DataKnockouts & Wire Bending SpaceDimensionsTypes 1, 12 and 12KType 3RNumber of Knockouts Per Panel (Type 4, 4X, 12 have no KO’s)Conduit Range Maximum Maximum Cable SizesPer Knockout Hub Size Recommended (Cu/Al)Breaker Outside Dimensions (inches) for Type 1, 3R, 4, 4X,Frame (inches) Top Bottom Side Back Bottom Side Back Type 3R 12 & 12K Enclosures QP, QPH, HQP15–1251⁄2, 3 ⁄4, 1, 1 1 ⁄4, 1 1 ⁄2 4 4 4 4 3 1 1 2 7 1 ⁄8" high encl. #6 BQ, BQH, HBP 3⁄4, 1, 1 1 ⁄4 1 1 2 2 8 1 3 270–100QPP, QPPH, HQPP125–2251⁄2, 3 ⁄4, 1, 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2 — — — — 4 1 1 2 1 ⁄2 250 kcmilQJ 1 1 ⁄2, 2, 2 1 ⁄2, 3 2 2 2 2 3 1 1 2 1 ⁄2NGG 3⁄4, 1, 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2 — — — — — — — —ED2, ED4, ED6,HED47⁄8, 1 1 ⁄8, 1 3 ⁄8, 1 3 ⁄4, 2 2 2 2 2 2 1 1 27⁄8, 1 1 ⁄8, 1 3 ⁄8, 1 3 ⁄4, 2 2 2 — — 2 — —CED67⁄8, 1 1 ⁄8, 1 3 ⁄8, 1 3 ⁄4, 2, 2 1 ⁄2 2 2 2 2 — 1 12 (CFD6 only 300 kcmil)5ENCLOSEDCIRCUIT BREAKERSFXD6, FD6, FXD6, FD61 1 2 2 1 1 —1 1 ⁄8, 1 3 ⁄8, 1 3 ⁄4, 2, 2 1 ⁄2, 3HFD6, CFD6 1 1 — — 1 — —4JXD2, JXD6, JD6,HJD6, HJXD6, HHJD6, 1 1 ⁄2, 2, 2 1 ⁄2, 3, 3 1 ⁄2, 4 1 1 2 4 — — — 4 (2) 600 kcmilHHJXD6, SJD6, SHJD6LXD6, LD6, HLXD6,HLD6, HHLD6, HHLXD6, 1 1 ⁄2, 2, 2 1 ⁄2, 3, 3 1 ⁄2, 4 1 1 2 4 — — — 4 (2) 600 kcmilSLD6, SHLD6LMXD6, LMD6HLMXD6, HMLD6— — — — — — — — 4 (3) 600 kcmilMD6, SMD6, HMD6(3) 600 kcmil or— — — — — — — — 4ND6, SND6, HND6(4) 500 kcmilHubs (Type 3R)ConduitBreaker Size Catalog ListFrame (inches) Number Price $0 3 ⁄4 ECHS075 39.50QP, QPH, HQP,1 ECHS100 39.50BQ, BQH, HBQ,NGG1 1 ⁄4 ECHS125 39.501 1 ⁄2 ECHS150 39.502 ECHS200 69.001 1 ⁄4 ECHS125 39.50QPP, QPPH, HQPP, 1 1 ⁄2 ECHS150 39.50QJ2, QJH2, QJ2-H 2 ECHS200 69.002 1 ⁄2 ECHS250 109.000 3 ⁄4 ECHR075 40.00ED2, ED4, ED6, 1 ECHR100 39.50HED4, HED6, HHED6, 1 1 ⁄4 ECHR125 39.50CED6 1 1 ⁄2 ECHR150 40.002 ECHR200 70.00FXD6, FD6, HFD6, HFXD6,2 1 ⁄2 ECHV250 125.00CFD6, JXD2, JD6,3 ECHV300 182.00JXD6, HJD6, HJXD6,3 1 ⁄2 ECHV350 274.00LD6, LXD6, HLD6,4 ECHV400 362.00HLXD6(A)Note: Enclosures for 250A max breakershave a hub provision on the rainshed.Enclosures for larger breakers (J, L, M& N frame) have blank toprainsheds. Drill or punch hole in thefield to accommodate hub size desired.For inches / millimeters conversion,see Application Data section.Type 12K only.Type 12K enclosure has no knockouts this location.17 1 ⁄8" high enclosure provides sufficient wire bendingspace for all available CB lugs.Sufficient wire bending space is provided for allavailable mechanical type CB lugs.The use of cables larger than those listed below mayviolate NEC & UL wire bending space requirements.The use of compression type connectors will violateNEC and UL wire bending space requirements.5-14Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

6SPEEDFAX TM 2007-2008 Molded Case Circuit BreakersContentsWhat’s New in Circuit Breakers 6-2 – 6-3Federal Specifications Classification 6-4Catalog Numbering System 6-5 – 6-7Reference Guides 6-8 – 6-17Panelboard Mounting 240V Circuit Breakers 6-18 – 6-19Special Application Panelboard Mounting 240V Circuit Breakers 6-20BQD 100A Frame 480/277V Circuit Breakers 6-21NGB 125A Frame Panelboard 480/277V Breaker and Internal Accessories 6-22 – 6-23EB 125A Frame Panelboard Mounting 480V Breaker and Internal Accessories 6-24 – 6-25Lug-In/Lug-Out 240V Breakers w/INSTA-WIRE 6-26BQXD DIN Rail Mounted 240V Circuit Breakers 6-27QJ 225A Frame 6-28CQD 100A Frame 6-29NGG 125A Frame 6-30Internal Accessories for CQD100A and NGG 125A Circuit Breakers 6-31EG 125A Frame Circuit Breakers and Internal Accessories 6-32 – 6-33Sentron Thermal Mag and Electronic Circuit BreakersED 125A Frame and Internal Accessories 6-34 – 6-36FD 250A Frame and Internal Accessories 6-37 – 6-39JD/SJD 400A Frame and Internal Accessories 6-40 – 6-43LD/SLD 600A Frame and Internal Accessories 6-44 – 6-47LMD 800A Frame and Internal Accessories 6-48 – 6-50MD/SMD 800A Frame and Internal Accessories 6-51 – 6-54ND/SND 1200A Frame and Internal Accessories 6-55 – 6-58PD/SPD 1600A Frame and Internal Accessories 6-59 – 6-61RD 2000A Frame and Internal Accessories 6-62 – 6-63STD 3200A Frame and Internal Accessories 6-64 – 6-65Magnetic Trip Only—ETI Motor Circuit Protector 6-66 – 6-68Adjustable Instantaneous Magnetic Trip Settings 6-69 – 6-71Molded Case Switch—Circuit Disconnect 6-72Sensitrip III Digital Solid State Sentron Series 6-73 – 6-74WL Power Circuit Breakers—Insulated Case Circuit Breakers 6-75 – 6-78Electronic and Communications Accessories 6-79 – 6-80Lug Information 6-81 – 6-83Breaker Modifications 6-84Internal Accessories—Feature Combinations 6-85External Accessories 6-86 – 6-91VL Thermal Mag and Electronic Circuit BreakersOverview 6-92 – 6-95DG 150A Frame and Internal Accessories 6-96 – 6-99FG 250A Frame and Internal Accessories 6-100 – 6-103JG 400A Frame and Internal Accessories 6-104 – 6-107LG 600A Frame and Internal Accessories 6-108 – 6-111MG 800A Frame and Internal Accessories 6-112 – 6-115NG 1200A Frame and Internal Accessories 6-116 – 6-119PG 1600A Frame and Internal Accessories 6-120 – 6-122Molded Case Switch 6-123Molded Case Protector 6-124External Accessories 6-125 – 6-139Accessory Locations 6-140Suffix for Internal Accessories 6-141Technical Data 6-142 – 6-143Unusual Operating Conditions 6-144 – 6-145General TechnicalSeries Short Circuit Ratings 6-146 – 6-150Unusual Operating Conditions 6-151 – 6-152IEC 947—2 AC Interrupting Ratings 6-153Typical Specifications 6-154Superseded Circuit Breakers 6-155 – 6-1576MOLDED CASECIRCUIT BREAKERSResidential Commercial Industrial

Molded Case Circuit BreakersMolded Case Circuit BreakersOEM Circuit BreakersIn this issue of the Speedfax, Siemens introduces the modular and flexible design ofSiemens VL molded case circuit breakers (MCCB) for OEM applications.This family of MCCB’s allow the OEM customer the flexibility of last minute changes,with a minimum level of stock due to product modularity. The VL family of MCCB’salso offer the widest range of field installable accessories in the industry.IntroductionRatings 30-1600A Interruption Ratings (UL/CSA) N 35kA @ 480VacVoltage 600Vac H 65kA @ 480Vac690Vac (IEC) L 100kA @ 480VacStandards UL, CSA, NOM, IEC, CE MarkedPanelboard Application Circuit BreakersTwo new MCCB offerings for Panelboard applications are introduced in this issue.MOLDED CASECIRCUIT BREAKERS6NGB—The new NGB is a quick bolt-in panelboardmolded case circuit breaker based on the compactdesign of the highly successful Siemens NGG(cable-in / cable-out) MCCB.Ratings 15-125APoles 1, 2, 3Voltage 480Y/277AIC25kA @ 480VacStandards UL, CSA, NOMEB—The new EB circuit breaker is alsoa compact quick bolt-in design for panelboardapplication only.Ratings 15-125APoles 1, 2, 3Voltage 600Y/347AIC35-65kA @ 480VacStandards UL, CSA, NOM, CE MarkedSentron Molded Case Circuit BreakersNote: The SENTRON family continues to be the standard offering of MCCB’s for all applications, with the exception of 800A-1600A forSiemens panelboard and switchboards. These products will incorporate the new VL series of circuit breakers.6-2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersIntroductionOrderingIn the FD through RD frames, you mayorder molded case circuit breakers threebasic ways:▪ As separately ordered frames, tripunits and lugs▪ As frame, trip unit and lugs ordered asone catalog number and shippedunassembled or assembled▪ As Frame and Trip Unit shippedassembled and with the trip unit madenon-removable, in compliance with UL489 requirements that to be reversefed the circuit breaker must not havean interchangeable trip unit.These two options are described in thefollowing:Components Ordered SeparatelyTo get the components for a 3-pole, 400Amp standard interrupting circuit breaker,you would order the frame (JD63F400),the trip unit (JD63T400) and six lugs(TA2J6500). This option is normallyuseful only if you stock and use largevolumes of product and wish to reduceyour inventory cost. You may stock, forexample, a smaller number of frames(JD63F400) and a variety of trip units(JD63T300, JD63T350, etc.) andassemble breakers as you need them.Frame, Trip Unit and LugsOrdered TogetherIf you order the catalog numberJD63B400, you will receive a frame, atrip unit and 6 lugs in separate packages.By suffixing this number with “L” (e.g.JD63B400L), you will receive frame, tripunit and lugs assembled in one container.Pursuant to UL 489, a product orderedthus will have the markings “LINE” and“LOAD”, and may not be “reverse fed”(with power flowing from the “OFF” endof the breaker toward the “ON” end).Non-Interchangeable Trip BreakersIf you place an “X” after the frame sizedesignator (e.g. JXD63B400), you willreceive a frame and trip unit assembled,with the trip unit made non-removable.If you suffix an “L” to this catalognumber (e.g. JXD63B400L), you willreceive the breaker, non-removable tripunit and lugs assembled. Unless youanticipate a specific need to change thebreaker's ampere rating in the future,this is the preferred ordering method, asthe products are assembled to Siemens'specifications in our factories. Thesebreakers are suitable for use reverse fedaccording to UL 489, since the trip unit isnot removable.The smaller frames (QJ, ED and below)do not have removable trip units, andconsequently are shipped only asassembled products. To add lugs,see the ordering instructions oneach product's catalog page.500V DC Wiring ConfigurationConnecting Breakers for DCApplicationMost Siemens thermal magnetic tripMCCBs are applicable on direct current(dc) systems. Generally, for 250 V dcsystems a two pole breaker is used,with one pole on each leg of the supplycircuit. For three pole breakers applied on500 V undergrounded DC systems, it isimportant to connect the power supply“zig-zag” through the breaker as shownin the figure below. This assures that theVoltage between phases on the breakerterminals is uniformly distributed.6MOLDED CASECIRCUIT BREAKERSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-3

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersFederal Specification ClassificationW-C-375C/GENReferenceInterrupting RatingBreaker Type(All Circuit Breakers Meet or ExceedClass Symmetrical Amperes Volts AC 60HZ Poles Range of Current Trip the Indicated Class Level)10a 5,000 120/240 1 or 2 15–100 QP, BQ, QT, BL10b 5,000 240 2 or 3 15–100 QP, BQ, BQD, CQD, BL11a 7,500 120 1 15–100 QP, BQ, BQD, CQD, BL11b 7,500 240 2 or 3 15–100 QP, BQ, BQD, CQD, BL12a 10,000 120/240 1 or 2 15–100 QP, BQ, QT, ED2, BL12b 10,000 240 2 or 3 15–225 QP, BQ, QJ2, ED2, BQD, CQD, BL12c 10,000 277 1 15–100 BQD, CQD, NGG, NGB, NEG, NEB13a 14,000 277 1 15–100 ED4, BQD, CQD, NGG, NGB, NEG, NEB13b 14,000 277/480 1, 2, or 3 15–100 ED4, BQD, CQD14a 22,000 120/240 1 or 2 15–100 QPH, BQH, BLH14b 22,000 240 2 or 3 70–400 QJH2, QJ2-H, BQH, BQD, CQD, BLH15a 65,000 120/240 1 or 2 15–100 HQP, HBQ, ED4, HED4, NGG, NGB, NEG, NEB15b 65,000 240 2 or 3 15–225 ED6, ED4, FXD6, FD6, HED4, BQD, CQD, HQJ2H,NGG, NGB, NEG, NEB16a 100,000 480 2 or 3 15–225 CFD6, CED616b 100,000 600 2 or 3 15–600 CED6, CFD6, CJD6, SCJD6, CLD6, SCLD617a 200,000 600 2 or 3 70–2000 —18,000 24018a 14,000 480 2 or 3 15–125 ED6, HED6, HHED614,000 60022,000 24019a 18,000 480 2 or 3 70–225 FXD6, FD6, CFD6, HFD614,000 60025,000 24020a 22,000 480 2 or 3 70–225 FXD6-A, FD6-A, CFD6, HFD622,000 600HFD6, CFD6, JXD6(A), JD6(A), SJD6(A), HJD(A),21a42,000 240HJXD6(A), HHJD6, SHJD6(A), CJD6, SCJD6,30,000 480 2 or 3 70–800LXD6(A), LD6(A), SLD6(A), HLD6(A), HLXD6(A),22,000 600HHLD6, SLD6(A), SHLD6(A), CLD6, SCLD6,LMD6, LMXD6, HLMD6, HLMXD6, MD6, MXD6,SMD6, HMD6, HMXD6, SHMD6, CMD6, SCMD665,000 24022a 25,000 480 2 or 3 15–125 CED6, ED6, HED6, HHED6, FXD6-A, FD6-A18,000 600HHED6, FXD6-A, FD6-A, HFD6, HHFD6, CFD6,JD6(A), JXD6(A), SJD6(A), HJD6(A), HJXD6(A),SHJD6(A), HHJD6, HHJXD6, CJD6, SCJD6,65,000 240 LXD6(A), LD6(A), SLD6(A), HLD6(A), HLXD6(A),23a 35,000 480 2 or 3 70–1200 SHLD6(A), HHLD6, HHLXD6, CLD6, SCLD6,25,000 600 LMD6, LMXD6, HLMD6, HLMXD6, MD6, MXD6,SMD6, HMD6, HMXD6, SHMD6, CMD6, SCMD6,ND6, NXD6, SND6, HND6, HNXD6, SHND6,CND6, SCND624a65,000 24050,000 480 2 or 3 1200–2000PD6, PXD6, HPD6, HPXD6, CPD642,000 600RD6, RXD6, HRD6, HRXD6, SPD6, SHPD625a125,000 24080,000 480 2 or 3 600–4000HHLD6, CLD6, CMD6, CND660,000 600SCLD6, SCMD6, SCND6, CPD6Applicable StandardsUL489 — Molded Case Circuit Breakersand Circuit Breaker Enclosures.UL486A — Wire Connectors andSolderless Lugs for use with copper wireUL486B — Wire Connectors andSolderless Lugs for use withaluminum wireUL943 — Ground Fault Interrupters (forpersonnel protectors)UL1087 — Molded Case SwitchesUL50 — Cabinets and BoxesUL869 — Service EquipmentNEMA AB-1 — Molded Case CircuitBreakers and Molded Case SwitchesCSA–C22.2 No. 5, C22.2 No. 14Note:(A) Molded case circuit breakers are designed and testedin accordance to applicable portions of UL489 and meetapplication requirements of the National Electric Code.Unless marked otherwise, circuit breakers are 80% duty rated.(B) Molded case circuit breakers are to be connected with 60 or75°C wire for circuit breakers having a rated ampacity of100 amperes or less. Circuit breakers having a rated ampacitygreater than 100 amperes shall only be cabled with 75°Ccable unless otherwise indicated on the circuit breakerlabel. Exceptions to this rule are outlined in the article110-14 C(1)(2) of the 2005 National Electric Code.Interrupting ratings are not limited to the values or groups ofvalues listed. However, the values listed are minimum valuesfor the class specified.Single-unit or duplex construction must be specified.Use minimum frame size for ampere rating.6-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersCatalog Numbering SystemSelection/ApplicationIf used on 250A frame and above meansnon-interchangeable trip breaker withfactory assembled frame and trip. Solidstate trip and current limiting (S or C infirst character) are non-interchangeableonly, and the “X” is omitted.X DTrip Unit Type— Omitted – Thermal-MagneticS — Sensitrip ® Electronic TripSentron Series Type/Interrupting Range— Omitted – Standard RatingH — High IC RatingHH — Extra High IC RatingC — Highest IC Rating and Current LimitingFrame IdentifierE — Type ED M — Type MDF — Type FD N — Type NDJ — Type JD P — Type PDL — Type LD R — Type RDLM — Type LMD T — Type TDMaximum Voltage2 — 240 Vac4 — 480 Vac6 — 600 VacNumber of Poles1239 used to indicate the max. functions for an electronic trip circuit breaker (always 3 poles)(Specific Application Type)B — Standard 40°C BreakerM — Calibrated for 50°C ApplicationF — Frame OnlyT — 40°C Trip Unit OnlyW — 50°C Trip Unit OnlyS — Molded Case SwitchL — Low Instantaneous Range ETI BreakerA — Standard Range ETI BreakerH — High Instantaneous Range ETI BreakerMaximum Continuous Current RatingED Frame — 015, 020, 025, 030, 035, 040, 045, 050, 060, 070, 080, 090, 100, 110, 125FD Frame — 070, 080, 090, 100, 110, 125, 150, 175, 200, 225, 250JD Frame — 200, 225, 250, 300, 350, 400LD Frame — 250, 300, 350, 400, 450, 500, 600LMD Frame — 500, 600, 700, 800MD Frame — 500, 600, 700, 800ND Frame — 900, 100 (1000A), 120 (1200A)PD Frame — 120 (1200A), 140 (1400A), 160 (1600A)RD Frame — 160 (1600A), 180 (1800A), 200 (2000A)TD Frame — 2000, 2500, 3200SuffixL — where applicable indicates a breaker shipped with line/loads lugs installedA — used with a switch to show automatic self protectionY — 400 HertzH — 100% ratedP — Load side lugs only6MOLDED CASECIRCUIT BREAKERSNOTE:— Position omitted if not used.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-5

VL Molded Case Circuit BreakersCatalog Numbering SystemSelection/ApplicationInterrupting ClassN — NormalH — HighL — Very HighC — Trip Unit OnlyFrame FamilyG — Type GG L — Type LGE — Type EG M — Type MGD — Type DG N — Type NGF — Type FG P — Type PGJ — Type JGBreaker TypeG — Global (UL, IEC, CE, CSA, NOM)T — Trip Unit Only (Global)H — 100% ratedX — Non-InterchangeableM — Motor Circuit ProtectorS — Molded Case SwitchJ — 240V only rated, Non-interchangeable onlyY — 100% rated, Non-interchangeableN — NavalNumber of Poles1, 2, 3, 4, 5 (4P w/ neutral protection)Trip UnitB — Thermal Magnetic, standard 40° C ambient L — Magnetic Only, Motor Circuit Protector - LowC — Thermal Magnetic, calibrated for 50° C ambient (non-UL) instantaneous rangeD — Electronic w/ LCD, LSI, 3P or 4P (neutral protected) M — Magnetic Only, Motor Circuit Protector - StandardE — Electronic w/ LCD, LSIG, 3P/4W (selectable residual orinstantaneous rangereturn type ground fault protection)N — Electronic LI, 3P or 4P (neutral protected)F — Frame only, without trip unitP — Electronic LSI, 3P or 4P (neutral protected)H — Magnetic only, Motor Circuit Protector - Highinstantaneous rangeS — Molded Case SwitchU — Electronic, LSIG, 3P/4W or 4P, residual ground fault protectionX — Electronic, LIG, 3P/4W or 4P, residual ground fault protection6MOLDED CASECIRCUIT BREAKERSContinuous Current RatingFor GG use 015, 020, 025, 030, 035, 040, 050, 060, 070, 080, 090, 100, 110, 125For EG use 015, 020, 025, 030, 035, 040, 050, 060, 070, 080, 090, 100, 110, 125For DG use 050, 060, 070, 080, 090, 100, 110, 125, 150For FG use 100, 110, 125, 150, 175, 200, 225, 250For JG use 250, 300, 350, 400For LG use 400, 500, 600For MG use 600, 700, 800For NG use 800, 900, 100 (1000A), 120 (1200A)For PG use 120 (1200A), 140 (1400A), 160 (1600A)TerminationsB — Load End Standard (cu/al) LugsL — Line & Load Standard (co/al) LugsX — No Lugs (use only if accessory suffixes are to follow)AccessoriesAuxiliary and Alarm Switch CombinationsSuffix DescriptionA1 — 1 Alarm (includes 1NO & 1NC switch with a 2 Aux./1 Alarm Base, for frames EG to JG) Note: A1 and A3 include 1NO and 1NC switch forA2 — 2 Aux (1NO & 1NC switch with a 3 Aux. Base, for frames EG to JG) alarm purposes, only one of these switches mayA3 — 2 Aux + 1 Alarm (2NO & 2NC switches with a 2 Aux./1 Alarm Base, for frames EG to JG) be used as there is only one space for an alarm.A3 — 2 Aux + 2 Alarm (2NO & 2NC switches with a 2 Aux./2 Alarm Base, for frames LG to PG)A4 — 4 Aux (2NO & 2NC switches with a 4 Aux. Base, for frames LG to PG)Shunt TripsRB — 24 VDC RM — 48-60 VACRC — 48-60 VDC RN — 110-127 VACRD — 110-127 VDC RS — 208-277 VACRE — 250 VDC RV — 380-600 VACUnder Voltage ReleasesUA — 12 VDC UN — 110-127 VACUB — 24 VDC UP — 208 VACUC — 48 VDC UR — 220-250 VACUD — 110-127 VDC US — 277 VACUE — 220-250 VDC UT — 380-415 VACUG — 60 VDC UU — 440-480 VACUV — 600 VACLCD = Liquid Crystal DisplayLS = Long Delay & Short Delay trip functionsLSI = Long Delay, Short Delay, & Instantaneous trip functionsLSIG = Long Delay, Short Delay, Instantaneous, & Ground Fault trip functionsGF = Ground Fault3P = 3-pole4W = 4-wire6-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

VL Circuit BreakersCatalog Numbering SystemSelectionIf ordering factory-installed accessories or special modifications, you must order a 15-digit catalog number. See the examplesbelow for a detailed explanation. The 15 digit number is achieved by placing X’s in positions not being occupied by anaccessory/modification.Auxiliary Switch Example:H F G 3 B 2 0 0 L A 2 X X X XStandard 9-digit Aux. Switch Completes Cat #Shunt Trip / UVR Example:H F G 3 B 2 0 0 L X X U N X XStandard 9-digitUVRCompletes Cat #Shunt Trip / Auxiliary Switch Example:H F G 3 B 2 0 0 LA 2 R N X XStandard 9-digit Aux. Shunt CompletesSwitch Trip Cat #Factory Modification Example:H F G 3 B 2 0 0 L X X X X Z 1Standard 9-digitCompletes Cat # Custom Mod.Non-Interchangeable Trip Breakers Example:H F X 3 B 2 0 0 LStandard 9-digitThese places could designate an enclosure or special modification.Siemens will define the factory modification suffixes.6MOLDED CASECIRCUIT BREAKERSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-7

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersReference GuideThermal-Magnetic Trip BreakersSelection/ApplicationPlug-In BreakersPanelboard BreakersQP, QPH, HQP, BQD,QT QPP QPPH HQPP HQPPH QPJ BL BLH HBL BQD6 NGBPage 1-25 1-27, 1-29 1-27, 1-29 1-24, 1-29 1-24, 1-29 1-29 6-18 6-18 6-18 6-21 6-22RatingsACDCPoles 1, 2 1, 2, 3 1, 2, 3 1, 2, 3 2 2,3 1, 2, 3, 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3Amperes, Continuous 15–50 10–125 10–125 10–125 100–225 150–200 10–125 10–125 10–100 15–100 15–1251-Pole277 347120/240 120/240 120/240 120/240 120/240 120/240 120/240 120/240 120/240Volts (50/60 Hertz) 2-Pole 480/277 600/3473-Pole — 240 240 240 240 240 240 240 240 480/277 600/347120V 10,000 10,000 22,000 65,000 — — 10,000 22,000 65,000 65,000 100,000240V 10,000 10,000 22,000 65,000 100,000 10,000 10,000 22,000 65,000 65,000 100,000UL Interrupting Rating —Symmetrical RMS Amperes277V — — — — — — — — — 14,000 25,000347V — — — — — — — — — 10,000 14,000480/277V — — — — — — — — — 14,000 25,000600/347V — — — — — — — — — 10,000 14,000Volts — 2-Pole — — — — — — — — — 250 250Interrupting Rating — DC Amperes — — — — — — — — — 14,000 14,000Height15–50A — 2.87 2.87 — — 7.00 3.56 3.56 — 4.50 —15–30A — — — — — — — 3.75 — — —15–60A 3.12 — — — — — — — — — —Dimensions in 55–125A — 3.12 3.12 3.12 3.12 3.00 3.75 — 3.75 4.50 —inches 1-Pole 1.00 1.00 1.00 1.00 — — 1.00 1.00 1.00 1.00 —Width 2-Pole 2.00 2.00 2.00 2.00 4.00 2.00 2.00 2.00 2.00 —3-Pole 2.00 3.00 3.00 3.00 — 3.00 3.00 3.00 3.00 3.00 —Depth 2.06 2.37 2.37 2.37 2.37 2.34 2.37 2.37 2.69 2.23 —Overcurrent Thermal and Fixed Magnetic Trip Devices Molded Case Switch — — — — — — — — — —Undervoltage Trip — — — — — — — — — — —Accessories & Shunt Trip — — Modifications Auxiliary Switch — — — — — IndividualEnclosuresAlarm Switch — — — — — — — — — Type 1 — Indoor Surface — — — — — —Type 1 — Indoor, Flush — — — — — — —Type 3R — Outdoor-Rainproof — — — — — — —QP, QPH, HQPBL, BLH, HBLBQD, BQD6For inches / millimeters conversion, see Application Data section. BQD6 CSA certified 10,000A @ 600Y/347V 15–70A only. Types QPP, QPPH, HQPP and HQPPH are special 2-poleconfigurations for load center mains. Amperage range =125–225A, width = 4 in. Single pole breakers available in ratings 10–70A only. 125A, 2-pole 120/240V AC only. Not applicable to types QPP and QPPH. Single pole circuit breakers available in ratings 15-70A only,125A available as a 2-pole only. Not applicable to type HQPP and HQPPH. Fits only Siemens EQIII load centers. Breaker is 2 or 3poles wide.6-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersReference GuideThermal-Magnetic Trip BreakersSelection/ApplicationGeneral Purpose BreakersBQ BQH HBQ QJ2 QJH2 QJ2-H HQJ2-H CQD NGGPage 6-26 6-26 6-26 6-28 6-28 6-28 6-28 6-29 6-30Poles 1, 2, 3 1, 2, 3 1, 2, 3 2, 3 2, 3 2, 3 3 1, 2, 3 1, 2, 31-Pole 15–70 15–70 15–50 — — — — 15–100 15–125Amperes, Continuous 2-Pole 15–125 15–100 15–70— 15–100 15–12560–225 60–225 60–2253-Pole 15–100 15–100 15–100 100–225 15–100 15-125RatingsACDC1-Pole— — — — 277 347120/240 120/240 120/240Volts (50/60 Hertz) 2-Pole —240 240 240480/277 600/3473-Pole 240 240 240240120V 10,000 22,000 65,000 — — — — 65,000 65,000UL Interrupting Rating — 240V 10,000 22,000 65,000 10,000 22,000 42,000 100,000 65,000 65,000Symmetrical RMS Amperes 480V — — — — — — — 14,000 25,000600/347V — — — — — — — 10,000 14,000Volts — 2-Pole — — — — — — — 125/250 125/250Interrupting Rating — DC Amperes — — — — — — — 14,000 14,00015–50A 3.75 3.75 4.00 — — — — 4.50 —Height 55–125A 4.00 4.00 4.00 — — — — 4.50 —Dimensions in 60–225A — — — 7.00 7.00 7.00 7.00 — —inches 1-Pole 1.00 1.00 1.00 — — — — 1.00 1.00Width 2-Pole 2.00 2.00 2.00 3.00 3.00 3.00 — 2.00 2.003-Pole 3.00 3.00 3.00 4.50 4.50 4.50 4.50 3.00 3.00Depth 2.37 2.37 2.37 2.34 2.34 2.53 2.53 2.87 2.90Overcurrent Thermal and Fixed Magnetic Trip Devices Molded Case Switch — — — — — — —Undervoltage Trip — — — — — — — —Shunt Trip Accessories & Auxiliary Switch Modifications Alarm Switch — — — — — IndividualEnclosuresMechanical Interlock — — — — —Fungus Proofing (ref. page 6-84) Type 1 — Indoor Surface — Type 1 — Indoor, Flush — Type 3R — Outdoor-Rainproof — 6MOLDED CASECIRCUIT BREAKERSBQ, BQH, HBQQJ2, QJH2, QJ2-HCQDNGGFor inches / millimeters conversion, see Application Data section. 3-pole breakers only (factory installed only). Type CQD6—CSA only. CQD breakers are rated 14,000 KAIC at 480/277V.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-9

Molded Case Circuit BreakersReference GuideThermal-Magnetic Trip BreakersGeneral Purpose BreakersSelection/Application6MOLDED CASECIRCUIT BREAKERSNEB, NEG HEB, HEG ED2 ED4 ED6 HED4 HHED6 CED6Page 6-24, 6-32 6-24, 6-32 6-34 6-34 6-34 6-35 6-35 6-35ACPoles 1, 2, 3, 4 1, 2, 3, 4 1, 2, 3 1, 2, 3 1 , 2, 3 1, 2, 3 2, 3 2, 3Amperes, Continuous 15–125 15–125 15–100 15–125 15–125 15–125 15–125 15–125Volts 50/60HZ 1-Pole 347 347 120 277 347 277 — —2-Pole3-Pole600/347 600/347 240 480 600 480 600 600UL120V — — 10,000 — — 100,000 — —240V 85,000 100,000 10,000 65,000 65,000 100,000 100,000 200,000277V — — — 22,000 — 65,000 — —347V — — — — 30,000 — — —480V 35,000 65,000 — 18,000 25,000 142,000 65,000 200,000Ratings Interrupt Rating 600V 22,000 25,000 — — 18,000 — 18,000 100,000Dimensions ininchesDCSymmetrical RMSAmperes220/240VIcu 85,000 100,000 — 65,000 — — 200,000Ics 42,000 50,000 — — 17,000 — — —IEC 947-2 380/415VIcu 40,000 70,000 — 35,000 — — 200,000 50/60HZ Ics 20,000 35,000 — — 19,000 — — —500VIcu — — — — 18,000 — — —Ics — — — — 15,000 — — —2-Pole, 250V DC Interrupting Ratings 35,000 42,000 5,000 30,000 30,000 30,000 — 30,0003-Pole, 500V DC Interrupting Ratings — — — — 18,000 — — 50,000Height 5.5 5.5 6.34 6.34 6.34 6.34 6.58 9.261-Pole 1.00 1.00 1.00 1.00 1.00 1.00 — —Width 2-Pole 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.003-Pole 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.004-Pole 4.00 4.00 — — — — — —Depth 3.00 3.00 4.00 4.00 4.00 4.00 4.00 4.00Thermal and Fixed Magnetic Trip OvercurrentThermal and Adjustable Magnetic Trip — — — — — — — —Devices Adjustable Magnetic Trip only — — — — — — Motor Circuit ProtectorAccessories &ModificationsIndividualEnclosuresMolded Case Switch — — Undervoltage Trip Shunt Trip Auxiliary Switch Alarm Switch Mechanical Interlock — — — — — — — —Rear Connection Studs Electric Motor Operator Plug-In Mounting Assembly (3-4 Pole Only) Fungus Proofing (ref. page 6-84) Type 1 — Indoor Surface — — Type 1 — Indoor, Flush — — Type 3R — Outdoor-Rainproof — — Type 7 — Flammable Gas Atmosphere — — — — —Type 9 — Combustion Dusttight — — — — —Type 5, 12 — Lint, Fine Dust, Oils, Coolants — — Type 12K — Semi-Dusttight — — For inches / millimeters conversion, see Application Data section. 1-pole only. 35-100A: 25,000 AIR at 277V AC/15-30A: 65,000 AIR at 277VAC. For DC UPS system application. Single pole ED6 (15–30A) 30kA, (35–100A) 18 kA. CSA Only. Single pole HED4, 15-30A: 65,000 AIR at 240V AC; single poleHED4, 35-100A: 25,000 AIR at 240V AC. NEG and HEG breakers are rated at 600/347V. 1-pole NEG breaker is rated 85K @ 240V, 35K @ 277V and22K @ 347V. 1-pole HEG breaker is rated 100K @ 240V, 65K@ 277V and 25K @ 347V.6-10Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersReference GuideThermal-Magnetic Trip BreakersSelection/ApplicationGeneral Purpose BreakersFD6A, HFD6, HHFD6, JD6-A, HJD6-A, HHJD6-A,FXD6A HFXD6 HHFXD6 CFD6 JXD2-A JXD6-A HJXD6-A HHJXD6-A CJD6Page 6-37 6-38 6-38 6-38 6-40 6-40 6-41 6-41 6-41RatingsACDCPoles 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3Amperes, Continuous 70–250 70-250 70-250 70–250 200-400 200-400 200-400 200-400 200-400Volts 50/60HZ2-Pole3-Pole600 600 600 600 240 600 600 600 600240V 65,000 100,000 200,000 200,000 65,000 65,000 100,000 200,000 200,000UL 480V 35,000 65,000 100,000 200,000 — 35,000 65,000 100,000 150,000Interrupt Rating 600V 22,000 25,000 25,000 100,000 — 25,000 35,000 50,000 100,000Symmetrical RMSIcu 65,000 100,000 200,000 — — 65,000 100,000 200,000 —Amperes220/240VIcs 33,000 50,000 100,000 — — 33,000 50,000 100,000 —IEC60947-2 380/415VIcu 35,000 65,000 100,000 — — 40,000 65,000 100,000 —50/60HZ Ics 18,000 33,000 50,000 — — 20,000 33,000 50,000 —500VIcu 20,000 42,000 65,000 — — 20,000 42,000 65,000 —Ics 10,000 21,000 33,000 — — 15,000 21,000 33,000 —2-Pole 250V DC Interrupting Ratings 30,000 30,000 — 50,000 30,000 30,000 30,000 — 50,0003-Pole, 500V DC Interrupting Ratings 18,000 25,000 — 50,000 — 25,000 35,000 — 50,000Height 9.50 9.50 14.12 14.12 11.00 11.00 11.00 11.00 17.86Dimensions in2-PoleinchesWidth4.50 4.50 4.50 4.50 7.50 7.50 7.50 7.50 7.503-PoleDepth 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00Thermal and Fixed Magnetic Trip — — — — — — — — —Thermal and Adjustable Magnetic Trip Overcurrent Adjustable Magnetic Trip Only — — — — —DevicesMotor Circuit ProtectorAccessories &ModificationsIndividualEnclosuresMolded Case Switch — — — — Undervoltage Trip Shunt Trip Auxiliary Switch Alarm Switch Mechanical Interlock Rear Connection Studs Electric Motor Operator Plug-In Mounting Assembly Fungus Proofing (ref. page 6-84) — Type 1 — Indoor Surface Type 1 — Indoor, Flush — — — — — — —Type 3R — Outdoor-Rainproof —Type 7 — Flammable Gas Atmosphere — —Type 9 — Combustion Dusttight — —Type 5, 12 — Lint, Fine Dust, Oils, Coolants Type 12K — Semi-Dusttight — —6MOLDED CASECIRCUIT BREAKERSFor inches / millimeters conversion, see Application Data section. For DC UPS application.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-11

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersReference GuideThermal-Magnetic Trip BreakersSelection/ApplicationGeneral Purpose BreakersLD6, HLD6, HHLD6, LMD6, HLMD6, MD6, HMD6,LXD6 HLXD6 HHLXD6 CLD6 LMXD6 HLMXD6 MXD6 HMXD6 CMD6Page 6-44 6-45 6-45 6-45 6-48 6-49 6-51 6-52 6-52Poles 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 3Amperes, Continuous 250-600 250-600 250-600 450-600 500-800 500-800 500-800 500-800 400-800Volts 50/60 HZ2-Pole3-Pole600 600 600 600 600 600 600 600 600240V 65,000 100,000 200,000 200,000 65,000 100,000 65,000 100,000 200,000UL 480V 35,000 65,000 100,000 150,000 50,000 65,000 50,000 65,000 100,0001AC600V 25,000 35,000 50, 000 100,000 25,000 50,000 25,000 50,000 65,0001RatingsInterrupt RatingIcu 65,000 100,000 200,000 — 65,000 100,000 65,000 00,000 200,000Symmetrical RMS 220/240VAmperesIcs 33,000 50,000 100,000 — 33,000 50,000 33,000 50,000 100,000IEC 947-2 380/415VIcu 40,000 65,000 100,000 — 40,000 65,000 40,000 65,000 100,000DC50/60HZ Ics 20,000 33,000 50, 000 — 20,000 33,000 20,000 33,000 50,000500VIcu 30,000 42,000 65, 000 — 30,000 42,000 30,000 42,000 65,0001Ics 15,000 21,000 33, 000 — 15,000 21,000 15,000 21,000 33,0002-Pole 250V DC Interrupting Ratings 30,000 30,000 — 50, 000 30,000 30,000 30,000 30,000 30,00013-Pole, 500V DC Interrupting Ratings 35,000 — 50, 000 25,000 50,000 25,000 50,000 50,000Height 11.00 11.00 11.00 17.86 16.00 16.00 16.00 16.00 16.00Width 7.50 7.50 7.50 7.50 7.50 7.50 9.00 9.00 9.00Depth 4.00 4.00 4.00 4.00 4.59 4.59 6.19 6.19 6.19Thermal and Adjustable Magnetic Trip Overcurrent Adjustable Magnetic Trip Only — — — DevicesMotor Circuit ProtectorMolded Case Switch — — — — Accessories &ModificationsIndividualEnclosuresUndervoltage Trip Shunt Trip Auxiliary Switch Alarm Switch Mechanical Interlock Rear Connection Studs Electric Motor Operator Plug-In Mounting Assembly — — Fungus Proofing (ref. page 6-84) Type 1 — Indoor Surface Type 1 — Indoor, Flush — — — — — — — —Type 3R — Outdoor-Rainproof — Type 5, 12 — Lint, Fine Dust, Oils, Coolants — Type 7 — Flammable Gas Atmosphere — — — — — —Type 9 — Combustion Dusttight — — — — —Type 12K — Semi-Dusttight — For inches / millimeters conversion, see Application Data section. For DC UPS application.6-12Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersReference GuideThermal-Magnetic Trip BreakersSelection/ApplicationGeneral Purpose BreakersND6, HND6, PD6, HPD6, NXD6 HNXD6 CND6 PXD6 HPXD6 CPD6 Page 6-55 6-56 6-56 6-59 6-59 6-59Poles 2, 3 2, 3 3 3 3 3Amperes, Continuous 800-1200 800-1200 800-1200 1200-1600 1200-1600 1200-1600Volts 50/60 HZ 3-Pole 600 600 600 600 600 600240V 65,000 100,000 200,000 65,000 100,000 200,000UL 480V 50,000 65,000 100,000 50,000 65,000 100,000RatingsDimensions ininches600V 25,000 50,000 65,000 25,000 50,000 65,000ACInterrupt RatingIcu 65,000 100,000 200,000 65,000 100,000 200,000Symmetrical RMS220/240VIcs 33,0001 50,000 100,000 33,000 50,000 100,000AmperesIEC 947-2 Icu 40,0001 65,000 100,000 40,000 65,000 100,000380/415VDC50/60HZ Ics 20,00011 33,000 50,000 10,000 17,000 25,000500VIcu 30,000 42,000 65,000 30,000 42,000 65,000Ics 15,0001 21,000 33,000 8,000 21,000 17,0002-Pole 250V DC Interrupting Ratings 30,0001 30,000 30,000 30,000 30,000 30,0003-Pole, 500V DC Interrupting Ratings 25,00011 50,000 50,000 25,000 50,000 50,000Circuit breakers require Connect-all Height 16.00 16.00 16.00 16.0 16.00 16.00mounting block. Dimensions shown Width 9.00 9.00 9.00 9.00 9.00 9.00are for circuit breaker only. Depth 6.191 6.19 6.19 6.19 6.19 6.19Thermal and Adjustable Magnetic Trip Overcurrent Adjustable Magnetic Trip Only — — — — — —DevicesMotor Circuit ProtectorMolded Case Switch — — —Undervoltage Trip Shunt Trip Auxiliary Switch Accessories & Alarm Switch Modifications Mechanical Interlock IndividualEnclosuresRear Connections Studs — — —Electric Motor Operator Plug-in Mounting Assembly — — —Fungus Proofing (ref. page 6-84) Mounting Block (required) — — — Type 1 — Indoor Surface Type 1 — Indoor, Flush — — — — — —Type 3R — Outdoor-Rainproof — — —Type 7 — Flammable Gas Atmosphere — — —Type 9 — Combustion Dusttight — — — — — —Type 5, 12 — Lint, Fine Dust, Oils, Coolants — — — — — —Type 12K — Semi-Dusttight — — —6MOLDED CASECIRCUIT BREAKERSFor inches / millimeters conversion, see Application Data section. For DC UPS application. 2-pole design. 3-pole design. Requires Connect-all mounting assembly. Dimensionsshown are for circuit breaker only.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-13

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersReference GuideThermal-Magnetic Trip Breakers& Electronic Trip BreakersGeneral PurposeBreakersSolid State Trip Circuit BreakersRD6, HRD6, RXD6 HRXD6 SJD6 SHJD6 SCJD6 SLD6 SHLD6 SCLD6Page 6-62 6-62 6-42 6-42 6-42 6-46 6-46 6-46Poles 3 3 3 3 3 3 3 3Amperes, Continuous 1600-2000 1600-2000 200-400 200-400 200-400 300-600 300-600 300-600Volts 50/60 HZ 3-Pole 600 600 600 600 600 600 600 600240V 65,000 100,000 65,000 100,000 200,000 65,000 100,000 200,000UL 480V 50,000 65,000 35,000 65,000 150,000 35,000 65,000 150,000RatingsDimensions ininches600V 25,000 50,000 25,000 35,000 100,000 25,000 35,000 100,000ACInterrupt RatingIcu 65,000 100,000Symmetrical RMS220/240VIcs 33,000 50,000AmperesIEC60947-2 Icu 40,000 65,000380/415VDC50/60HZ Ics 10,000 17,000500VIcu 30,000 42,000Ics 8,000 21,0002-Pole 250V DC Interrupting Ratings 30,000 30,0003-Pole, 500V DC Interrupting Ratings 25,000 50,000Height 16.00 16.00 11.00 11.00 17.86 11.0 11.00 17.86Width 3-Pole 9.00 9.00 7.50 7.50 7.50 7.50 7.50 7.50Depth 6.19 6.19 4.00 4.00 4.00 4.00 4.00 4.00Solid State Trip — — Thermal and Adjustable Magnetic Trip — — — — — —Overcurrent Adjustable Magnetic Trip Only — — — — — — — —DevicesMotor Circuit ProtectorMolded Case Switch — — — — — — —Undervoltage Trip Shunt Trip Auxiliary Switch Accessories & Alarm Switch Modifications Mechanical Interlock IndividualEnclosuresSelectionRear Connections Studs — — Electric Motor Operator Plug-In Mounting Assembly — — Fungus Proofing (ref. page 6-84) Mounting Block (required) — — — — — —Type 1 — Indoor Surface Type 1 — Indoor, Flush — — — — — — — —Type 3R — Outdoor-Rainproof — — — —Type 7 — Flammable Gas Atmosphere — — — —Type 9 — Combustion Dusttight — — — —Type 5, 12 — Lint, Fine Dust, Oils, Coolants — — Type 12K — Semi-Dusttight — — For inches / millimeters conversion, see Application Data section. Requires Connect-all mounting assembly. Dimensionsshown are for circuit breaker only.6-14Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersReference GuideElectronic Trip BreakersSelectionSolid State Trip Circuit BreakersSMD6 SHMD6 SCMD6 SND6 SHND6 SCND6 SPD6 SHPD6 STD6 SHTD6 SHHTD6 Page 6-53 6-53 6-53 6-57 6-57 6-57 6-60 6-60 6-64 6-64 6-64Poles 3 3 3 3 3 3 3 3 3 3 3Amperes, Continuous 600- 600- 600- 800- 800- 800- 1200- 1200- 2000- 2000- 2000-800 800 800 1200 1200 1200 1600 1600 3200 3200 3200RatingsDimensions ininchesOvercurrentDevicesAccessories &ModificationsIndividualEnclosuresVolts 50/60HZ 3-Pole 600 600 600 600 600 600 600 600 600 600 600240V 65,000 100,000 200,000 65,000 100,000 200,000 65,000 100,000 85,000 150,000 200,000UL 480V 50,000 65,000 100,000 50,000 65,000 100,000 50,000 65,000 65,000 100,000 150,000AC InterruptRating 600V 25,000 50,000 65,000 25,000 50,000 65,000 25,000 50,000 50,000 85,000 100,000Symmetrical380/415V Icu — — — — — — — — — — —RMSIEC60947-2 Ics — — — — — — — — — — —Amperes 50/60HZIcu — — — — — — — — — — —690VIcs — — — — — — — — — — —Height 10.00 16.00 16.00 16.00 16.00 16.00 16.00 16.00 27.5 27.5 27.5Width 9.00 9.00 9.00 9.00 9.00 9.00 9.00 9.00 14.12 14.12 14.12Depth 6.19 6.19 6.19 6.19 6.19 6.19 6.19 6.19 11.38 11.38 11.38Solid State Trip Undervoltage Trip Shunt Trip Auxiliary Switch Alarm Switch Mechanical Interlock Rear Connection Studs — — Electric Motor Operator — — —Plug-In Mounting Assembly — — — — —Fungus Proofing (ref. page 6-84) Type 1 — Indoor Surface — — —Type 1 — Indoor, Flush — — — — — — — — — — —Type 3R — Outdoor-Rainproof — — — — —Type 7 — Flammable Gas Atmosphere — — — — — — — — — — —Type 9 — Combustion Dusttight — — — — — — — — — — —Type 5, 12 — Lint, Fine Dust, Oils, Coolants — — — — —Type 12K — Semi-Dusttight — — — — —6MOLDED CASECIRCUIT BREAKERSFor inches / millimeters conversion, see Application Data section. Requires connect-all mounting block assembly. Dimensionsshown are for circuit breaker. Breaker has rating plugs which can be changed within eachframe rating.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-15

Molded Case Circuit BreakersReference GuideSelection/Application6MOLDED CASECIRCUIT BREAKERSPage 6-30 6-32 6-96 6-100 6-104Breaker Frame Family GG EG DG FG JGContinuous Amps 15–125A 15–125A 30–150A 40–250A 70–400APoles 1, 2, 3 1, 2, 3, 4 2, 3, 4 2, 3, 4 2, 3, 4Max. Volts AC 600Y/347V 600Y/347V 600V 600V 600VBreaker Type NGG NEG HEG NDG HDG LDG NFG HFG LFG NJG HJG LJGInterrupting Class N N H N H L N H L N H L240Vac 65 85 100 65 100 200 65 100 200 65 100 200InterruptingUL 480Vac 25 35 65 35 65 100 35 65 100 35 65 100Rating RMS600Vac 14 (600Y/347) 22 25 18 20 25 18 20 25 25 25 25RatingsSymmetrical220/240Vac 65/33 85/43 100/50 65/65 100/75 200/150 65/65 100/75 200/150 65/65 100/75 200/150Amperesl CS /l CU 380/415Vac 25/12.5 40/30 70/35 40/40 70/70 100/75 40/40 70/70 100/75 45/45 70/70 100/75AC 50/60Hz690Vac — — — 12/6 12/6 12/6 12/6 12/6 12/6 12/6 15/8 15/8250Vdc (2-Pole) 14 35 42 30 30 30 30 30 30 30 30 30DC500Vdc (3-Pole) — — — 18 18 18 18 18 30 25 35 35Interrupting600Vdc (3-Pole) — — — # # # # # # # # #Ratings (UL) 750Vdc (4-Pole) — — — # # # # # # # # #1-Pole 5.1H x 1W x 2.8D 5.5H x 1W x 3D — —Dimensions 2-Pole 5.1H x 2W x 2.8D 5.5H x 2W x 3D 6.9H x 4.1W x 3.4D 11H x 5.5W x 4.2Din Inches 3-Pole 5.1H x 3W x 2.8D 5.5H x 3W x 3D 6.9H x 4.1W x 3.4D 11H x 5.5W x 4.2D4-Pole — 5.5H x 4W x 3D 6.9H x 5.5W x 3.4D 11H x 7.2W x 4.2DThermal-Magnetic ◆ ◆ ◆ ◆ ◆Electronic ◆ ◆ ◆Trip Unit Electronic with LCD ◆ ◆ ◆Information Interchangeable Trip Unit ◆ ◆ ◆Reverse Feed (w/Non-Interchangeable Trip) ◆ ◆ ◆ ◆ ◆Communications Capability* ◆ ◆ ◆Molded Case Switch ◆ ◆ ◆ ◆SpecificMotor Circuit Protector ◆ ◆ ◆ ◆ApplicationBreakers100% Rated ◆50°C Calibrated A ◆ ◆ ◆ ◆Auxiliary Switch ◆ ◆ ◆ ◆ ◆Alarm Switch ◆ ◆ ◆ ◆ ◆Shunt Trip ◆ ◆ ◆ ◆ ◆Undervoltage Release ◆ ◆ ◆ ◆Accessories & Mechanical Interlocks ◆ ◆ ◆ ◆Modifications Electric Motor or Stored Energy Operator ◆ ◆ ◆ ◆Rear Connecting Studs ◆ ◆ ◆ ◆Plug-In Mounting Assy. w/Trip Interlock ◆ ◆ ◆ ◆Draw-Out Assembly ◆ ◆ ◆Handle Mechanism Options ◆ ◆ ◆ ◆ ◆Fungus Proofing◆NEMA 1 – Indoor, Surface Mount ◆ ◆ ◆NEMA 1 – Indoor, Flush Mount ◆ ◆NEMA 3R – Outdoor, Rain Proof ◆ ◆ ◆Enclosures A NEMA 4, 4X – Stainless Steel ◆ ◆NEMA 7, 9 – Hazardous Locations ◆ ◆NEMA 12 – Dust ◆ ◆ ◆Terminal Shields ◆ ◆ ◆ ◆Distribution Lugs ◆ ◆ ◆ ◆ ◆Ground Sensor (Neutral Transformer) ◆ ◆ ◆ 500Vdc nominal, 600Vdc max. for ungrounded DC UPS systems. DC Interrupting Ratings are not applicable to electronic circuit breakers.* - Communications available via a COM 10 module using Profibus protocol.# - Consult Siemens for these applications.GG and EG are not VL family breakers and do not share common VL accessories.A - Consult Siemens for availability.6-16Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersReference GuideSelection/ApplicationPage 6-108 6-112 6-116 6-120Breaker Frame Family LG MG NG PGContinuous Amps 150–600A 200–800A 300–1200A 400–1600APoles 2, 3 2, 3, 4 2, 3, 4 3, 4Max. Volts AC 600V 600V 600V 600VBreaker Type NLG HLG LLG NMG HMG LMG NNG HNG LNG NPG HPG LPGInterrupting Class N H L N H L N H L N H L240Vac 65 100 200 65 100 200 65 100 200 65 100 200InterruptingUL 480Vac 35 65 100 35 65 100 35 65 100 35 65 100Rating RMS600Vac 25 25 25 25 35 50 25 35 65 25 35 65RatingsSymmetrical220/240Vac 65/65 100/75 200/150 65/65 100/75 200/150 65/65 100/75 200/150 65/65 100/75 200/150Amperesl CS /l CU 380/415Vac 45/45 70/70 100/75 50/50 70/70 100/75 50/25 70/35 100/50 50/25 70/35 100/50AC 50/60Hz690Vac 12/6 15/8 15/8 20/10 30/15 35/17 20/10 30/15 35/15 20/10 30/15 35/15250Vdc (2-Pole) 30 30 30 22 25 42 22 25 42 22 25 42DC500Vdc (3-Pole) 25 35 35 35 50 65 35 50 65 35 50 65Interrupting600Vdc (3-Pole) # # # # # # # # # # # #Ratings (UL) 750Vdc (4-Pole) # # # # # # # # # # # #1-Pole — — —Dimensions 2-Pole 11H x 5.5W x 4.2D 16H x 7.5W x 4.7D 16H x 9W x 6.2D —in Inches 3-Pole 11H x 5.5W x 4.2D 16H x 7.5W x 4.7D 16H x 9W x 6.2D4-Pole — 16H x 10W x 4.7D 16H x 12W x 6.2DThermal-Magnetic ◆ ◆ ◆ ◆Electronic ◆ ◆ ◆ ◆Trip Unit Electronic with LCD ◆ ◆ ◆ ◆Information Interchangeable Trip Unit ◆ ◆ ◆ ◆Reverse Feed (w/Non-Interchangeable Trip) ◆ ◆ ◆ ◆Communications Capability ◆ ◆ ◆ ◆Molded Case Switch ◆ ◆ ◆ ◆Specific Motor Circuit Protector ◆ ◆ ◆Application 100% Rated ◆ ◆ ◆Breakers 50°C Calibrated A ◆ ◆ ◆ ◆Auxiliary Switch ◆ ◆ ◆ ◆Alarm Switch ◆ ◆ ◆ ◆Shunt Trip ◆ ◆ ◆ ◆Undervoltage Release ◆ ◆ ◆ ◆Accessories & Mechanical Interlocks ◆ ◆ ◆ ◆Modifications Electric Motor or Stored Energy Operator ◆ ◆ ◆ ◆Rear Connecting Studs ◆ ◆ ◆ ◆Plug-In Mounting Assy. w/Trip Interlock ◆ ◆ ◆Draw-Out Assembly ◆ ◆ ◆ ◆Handle Mechanism Options ◆ ◆ ◆ ◆Fungus ProofingNEMA 1 – Indoor, Surface Mount ◆ ◆ ◆NEMA 1 – Indoor, Flush MountNEMA 3R – Outdoor, Rain Proof ◆ ◆ ◆Enclosures A NEMA 4, 4X – Stainless Steel ◆NEMA 7, 9 – Hazardous Locations◆NEMA 12 – Lint, Fine Dust, Oils, Coolant ◆ ◆Terminal Shields ◆ ◆ ◆ ◆Distribution LugsGround Sensor (Neutral Transformer) ◆ ◆ ◆ ◆6MOLDED CASECIRCUIT BREAKERS Communications available via COMPRO or COMMOD modules using Profibus or Modbus protocol. 500Vdc nominal, 600Vdc max. for ungrounded DC UPS systems. DC Interrupting Ratings are not applicable to electronic circuit breakers.# - Consult Siemens for these applications.A - Consult Siemens for availability.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-17

Molded Case Circuit BreakersPanelboard Mounting with INSTA-WIRESelection6MOLDED CASECIRCUIT BREAKERSDescription Catalog Number List Price $Type BL Type BLH Type HBLContinuous10,000A IR 22,000A IR 65,000A IRCurrent Rating Catalog List Catalog List Catalog List@ 40° C Number Price $ Number Price $ Number Price $10 B110 35.00 — — — —15 B115 35.00 B115H 69.00 B115HH 119.0020 B120 35.00 B120H 69.00 B120HH 119.0025 B125 35.00 B125H 77.00 B125HH■ 119.0030 B130 35.00 B130H 77.00 B130HH 119.0035 B135 35.00 B135H■ 77.00 B135HH■ 119.0040 B140 35.00 B140H 77.00 B140HH 139.0045 B145■ 35.00 B145H■ 77.00 B145HH■ 139.001-Pole50 B150 35.00 B150H 77.00 B150HH■ 139.0060 B160 35.00 B160H■ 77.00 B160HH■ 162.0070 B170 76.00 B170H■ 98.00 B170HH■ 162.002-Pole Bolt-On (Common-Trip 120/240V AC ) 10 B210 80.00 — — — —15 B215 80.00 B215H 156.00 B215HH 290.0020 B220 80.00 B220H 156.00 B220HH 290.0025 B225 80.00 B225H■ 156.00 B225HH■ 290.0030 B230 80.00 B230H 156.00 B230HH 290.0035 B235 80.00 B235H■ 156.00 B235HH■ 355.002-Pole40 B240 80.00 B240H 156.00 B240HH 355.0045 B245 80.00 B245H■ 156.00 B245HH■ 355.0050 B250 80.00 B250H 156.00 B250HH 355.0060 B260 80.00 B260H 156.00 B260HH 355.0070 B270 156.00 B270H■ 240.00 B270HH■ 581.0080 B280 212.00 B280H■ 342.00 B280HH■ 655.0090 B290 212.00 B290H■ 342.00 B290HH■ 655.00100 B2100 212.00 B2100H 342.00 B2100HH 655.00110 B2110■ 427.00 B2110H■ 861.00 B2100HH■ 655.00125 B2125 452.00 B2125H 905.00 B2125HH■ 2167.003-Pole2-Pole Bolt-On (Common-Trip 240V AC) 15 B215R 212.00 — — — —20 B220R 212.00 — — — —30 B230R 212.00 — — — —40 B240R■ 212.00 — — — —50 B250R 212.00 — — — —60 B260R 212.00 — — — —70 B270R■ 281.00 — — — —80 B280R■ 321.00 — — — —90 B290R■ 321.00 — — — —100 B2100R■ 321.00 — — — —3-Pole Bolt-On (Common-Trip 240V AC) 10 B310 266.00 — — — —15 B315 266.00 B315H 400.00 B315HH 503.0020 B320 266.00 B320H 400.00 B320HH 503.0025 B325 266.00 B325H 400.00 B325HH■ 503.0030 B330 266.00 B330H 400.00 B330HH 503.0035 B335 266.00 B335H■ 400.00 B335HH■ 503.0040 P340 266.00 B340H 400.00 B340HH 613.0045 B345 266.00 B345H■ 400.00 B345HH■ 613.0050 B350 266.00 B350H 400.00 B350HH 613.00 BreakerDimensions60 B360 266.00 B360H 400.00 B360HH 613.00 Type Amperes L D1 D270 B370 327.00 B370H 486.00 B370HH 655.00 BL, BLH 15–50 3 9 ⁄16 2 3 ⁄8 380 B380 369.00 B380H■ 570.00 B380HH 771.00 BL, BLH 55–125 3 3 ⁄4 2 3 ⁄8 390 B390 369.00 B390H■ 570.00 B390HH 771.00 HBL 15–125 3 3 ⁄4 2 3 ⁄8 3100 B3100 369.00 B3100H 570.00 B3100HH 771.00MP-T / MP-HT / MP-MT AccessoriesModificationsDescription Catalog Number Field/Factory Installed List Price $1-Pole Bolt-On (120V AC) 120V Shunt Trip add suffix...00S01■ Factory 141.00(adder) 400Hz Calibration add suffix...Y 8.00 (adder)24V Shunt Trip add suffix...00S07■ Factory 141.00(adder) 415V 50Hz Calibration add suffix...E No adder120V Auxiliary Switch add suffix...01■ Factory 83.00(adder) Marine 50˚C Ambient1-Pole Padlocking Device ECPLD1 Field 10.10 Calibrationadd suffix...M No adder2-Pole Padlocking Device ECPLD2 Field 10.20 Fungus Proofing add suffix...F 10.50 (adder per pole)3-Pole Padlocking Device ECQLD3 (bag of 10 pcs.) Field 98.00Handle Block ECHBD1 Field 9.10■ Built to order. Allow 2-3 weeks for delivery UL Listed for use on 3-phase grounded “B” systems — Shipped 4 per sleeve. 10,000 for this application. UL Listed 5KA IR.UL Listed for use with 60/75° wire through 125 amps, UL Listed for frequent switching applications (SWD). Not UL Listed.HACR rated. 120V AC Fluorescent Lighting. Shipped 12 per sleeve. 1 & 2 Poles only.1A and 1B contacts. Shipped 6 per sleeve. Contact factory for availability6-18 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersPanelboard Mounting Circuit BreakersSelection▪ UL Listed and CSA Certified▪ HACR Rated▪ Standard 1 inch per pole format with bolt-on designGround-Fault Circuit Interrupters (Class A - 5mA) Ground-fault circuit interrupters (GFCI) provide Class A ground fault protection. A GFCIis a device intended for personnel protection and will de-energize the circuit when afault current to ground is 6 milliamperes or more.10,000 A IR 22,000 A IRBreaker Ampere Catalog List Catalog ListType Rating Number Price $ Number Price $BLF/BLHF 15 BF115 344.00 BF115H 683.001-Pole 20 BF120 344.00 BF120H ■ 683.00120V AC 25 BF125■ 344.00 BF125H■ 683.00Bolt-On 30 BF130 344.00 BF130H 683.001-Pole GFCI2-Pole GFCIBLF/BLHF15 BF215 410.00 BF215H 743.0020 BF220 410.00 BF220H 743.002-Pole30 BF230 410.00 BF230H 743.00120/240V AC40 BF240 410.00 BF240H 743.00Bolt-On50 BF250 410.00 BF250H 743.0060 BF260 410.00 BF260H 743.00Ground Fault Equipment Protection (30mA) Ground fault circuit breakers provide protection of equipment from damagingline-to-ground fault currents by de-energizing the circuit for all ungrounded conductorsof the faulted circuit.BLE/BLEH 15 BE115418.00 BE115H 683.001-Pole 20 BE120 418.00 BE120H 683.00120V AC 30 BE130 418.00 BE130H 683.00Bolt-OnBLE/BLEH2-Pole120/240V ACBolt-On15 BE215 549.00 BE215H 995.0020 BE220 549.00 BE220H 995.0030 BE230 549.00 BE230H 995.0040 BE240 549.00 BE240H 995.0050 BE250 549.00 BE250H 995.0060 BE260■ 549.00 BE260H■ 995.00Arc-Fault Circuit Interrupters (AFCI) Arc-fault circuit interrupters (AFCI) detect arcing faults (an unintentional arcing conditionin a circuit) that standard circuit breakers are unable to detect. An AFCI is a branchfeeder device intended to mitigate the effects of arc-faults by de-energizing the circuitwhen an arc-fault is detected.1-Pole EquipmentProtection2-Pole EquipmentProtection6MOLDED CASECIRCUIT BREAKERSBAF/BAFH15 B115AF 361.00 B115AFH■ 717.001-Pole 120V AC 20 B120AF 361.00 B120AFH■ 717.00BAF/BAFH15 B215AF 454.00 B215AFH■ 820.002-Pole 120/240V AC 20 B220AF 454.00 B220AFH■ 820.001-Pole AFCI2-Pole AFCIQAF/QPF/QE AccessoriesDescription Catalog Number List Price $1-Pole Padlock (on/off) ECPLD1 10.102-Pole Padlock (on/off) ECPLD2 10.20Handle Block ECBX231M 9.70Wiring Diagrams■ Built to order. Allow 2–3 weeks for delivery.UL Listed as SWD (Switching Duty) Rated, suitable for120V AC Fluorescent Lighting.Discount Schedule MCCB White line neutral (pigtail) must be connected to thepanel neutral for the device to function.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-19

Molded Case Circuit BreakersSpecial Application Panelboard Mounting BreakersSwitching Neutrals BG 15 BG215 ■ 123.00 10 — —2-Wire 20 BG220 ■ 123.00 10 — —Common Trip 30 BG230 ■ 123.00 10 — —BG 15 BG315 ■ 186.00 — 10 —3-Wire 20 BG320 ■ 186.00 — 10 —Common Trip 30 BG330 ■ 186.00 — 10 —SelectionHID Lighting For high-intensity discharge lamp loads having in-rush currents above theinstantaneous trip setting of a standard breaker.BL15 B115HID ■ 45.00 10 — —1-Pole 20 B120HID 45.00 10 — —30 B130HID ■ 45.00 10 — —BL15 B215HID ■ 96.00 — 10 —2-Pole 20 B220HID 96.00 — 10 —30 B230HID ■ 96.00 — 10 —Tungsten LightingFor high wattage, tungsten-lamp loads in-rush currents above the instantaneoustrip setting of a standard breaker.BL15 B115T 62.00 10 — —1-Pole 20 B120T 62.00 10 — —Switching NeutralsMolded Case SwitchFor applications that do not require overcurrent protection.6MOLDED CASECIRCUIT BREAKERSBL30 B230S 68.00 — — —2-Pole 60 B260S 80.00 — — —■ Built to order. Allow 2–3 weeks for delivery. HACR rated. UL Listed for frequent switching applications (SWD). 120V AC fluorescent lighting.6-20 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersBQD 100A Frame Panelboard Mounting Circuit BreakersBQD 1-Pole 2-Pole 3-Pole Selection/Dimensions480Y/277V AC–277V AC–125V DC 125/250V DC 480Y/277V ACContinuous List List ListCurrent Rating Catalog Price Catalog Price Catalog Price@ 40°C Number $ Number $ Number $15 BQD115 128.00 BQD215 289.00 BQD315 513.0020 BQD120 128.00 BQD220 289.00 BQD320 513.0025 BQD125 128.00 BQD225 289.00 BQD325 513.0030 BQD130 128.00 BQD230 289.00 BQD330 513.0035 BQD135 128.00 BQD235 289.00 BQD335 513.0040 BQD140 128.00 BQD240 289.00 BQD340 513.0045 BQD145 ■ 128.00 BQD245 289.00 BQD345 513.0050 BQD150 128.00 BQD250 289.00 BQD350 513.0060 BQD160 128.00 BQD260 289.00 BQD360 513.0070 BQD170■ 247.00 BQD270 588.00 BQD370 699.0080 BQD180■ 247.00 BQD280 588.00 BQD380 699.0090 BQD190■ 247.00 BQD290 588.00 BQD390 699.00100 BQD1100■ 247.00 BQD2100 588.00 BQD3100 699.00BQD6 CSA Certified1-Pole 2-Pole 3-Pole 347V AC 600/347V AC 600/347V ACContinuous List List ListCurrent Rating Catalog Price Catalog Price Catalog Price@ 40°C Number $ Number $ Number $15 BQD6115 128.00 BQD6215 289.00 BQD6315 513.0020 BQD6120 128.00 BQD6220 289.00 BQD6320 513.0025 BQD6125■ 128.00 BQD6225■ 289.00 BQD6325■ 513.0030 BQD6130 128.00 BQD6230 289.00 BQD6330 513.0035 BQD6135■ 128.00 BQD6235■ 289.00 BQD6335■ 513.0040 BQD6140■ 128.00 BQD6240■ 289.00 BQD6340 513.0045 BQD6145■ 128.00 BQD6245■ 289.00 BQD6345■ 513.0050 BQD6150■ 128.00 BQD6250■ 289.00 BQD6350 513.0060 BQD6160■ 128.00 BQD6260■ 289.00 BQD6360 513.0070 BQD6170■ 247.00 BQD6270■ 588.00 BQD6370 699.00Interrupting RatingsRMS Symmetrical Amperes (KA)NumberVolts ACVolts DCBreaker of 480/ 600/ 125/Type Poles 120 240 277 277 347 347 125 250BQD(UL)BQD6(CSA)1 65 — 14 — — — 14 —2 — 65 — 14 — — — 143 — 65 — 14 — — — —1 65 — — — 10 — 14 —2 — 65 — — — 10 — 143 — 65 — — — 10 — —BQD Internal Accessories Control Voltage Shunt Trip Shunt Trip and Auxiliary Switch CombinationsCatalogCatalogV AC V DC Number List Price $ Number List Price $24 — BQDST24▲ 636.00 BQDST24AAS▲ 897.00120 — BQDST120 636.00 BQDST120AAS▲ 897.00240 — BQDST240▲ 636.00 BQDST240AAS▲ 897.00277 — BQDST277▲ 636.00 BQDST277AAS▲ 897.00480 — BQDST480▲ 636.00 BQDST480AAS▲ 897.00600 — BQDST600▲ 636.00 BQDST600AAS▲ 897.00— 12 BQDST12▲ 636.00 BQDST12DAS▲ 897.00— 24 BQDST24▲ 636.00 BQDST24DAS▲ 897.00— 48 BQDST48▲ 636.00 BQDST48DAS▲ 897.00— 125 BQDST125▲ 636.00 BQDST125DAS▲ 897.00Maximum Voltage Auxiliary Switch Alarm SwitchCatalogCatalogAC DC Number List Price $ Number List Price $240 125 BQDA1▲ 271.00 BQDBA▲ 271.00240 125 BQDA2▲ 540.00 — —For inches / millimeters conversion,see Application Data section.■ Built to order. Allow 2–3 weeks for delivery.▲ Built to order. Allow 6–8 weeks for delivery. SWD rated for switching fluorescent lighting. HID rated at 277V AC. Not suitable for 3-phase delta 480V applications.HACR rated.BQD, BQD6BQD, BQD6Shipping WeightsNumber of Number per ShippingPoles Carton Weight (lbs.) (ea.)1 1/12/48 1.62 1/6/24 1.23 1/4/16 2.0Lugs For 60/70°C WireBQD – Load End Only15–40 #14–#6 AWG Cu#12–#6 AWG Al45–100 #8–#1 AWG Cu#6–#1/0 AWG AlAlarm and Auxiliary Switch CombinationCatalogNumber List Price $BQDA1BA 540.00 HID rated at 480Y/277V AC. Accessory adds one pole space.Accessories pages 6-86 to 6-916MOLDED CASECIRCUIT BREAKERSDiscount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-21

Molded Case Circuit BreakersNGB FrameType NGB (Panelboard Mount)1-Pole 2-Pole 3-PoleContinuous List List ListCurrent Rating Catalog Price Catalog Price Catalog Price@ 40°C Number $ Number $ Number $15 NGB1B015B 153.00 NGB2B015B 479.00 NGB3B015B 627.0020 NGB1B020B 153.00 NGB2B020B 479.00 NGB3B020B 627.0025 NGB1B025B 153.00 NGB2B025B 479.00 NGB3B025B 627.0030 NGB1B030B 153.00 NGB2B030B 479.00 NGB3B030B 627.0035 NGB1B035B 153.00 NGB2B035B 479.00 NGB3B035B 627.0040 NGB1B040B 153.00 NGB2B040B 479.00 NGB3B040B 627.0045 NGB1B045B 153.00 NGB2B045B 479.00 NGB3B045B 627.0050 NGB1B050B 153.00 NGB2B050B 479.00 NGB3B050B 627.0060 NGB1B060B 153.00 NGB2B060B 479.00 NGB3B060B 627.0070 NGB1B070B 257.00 NGB2B070B 635.00 NGB3B070B 738.0080 NGB1B080B 257.00 NGB2B080B 635.00 NGB3B080B 738.0090 NGB1B090B 257.00 NGB2B090B 635.00 NGB3B090B 738.00100 NGB1B100B 257.00 NGB2B100B 635.00 NGB3B100B 738.00110 NGB1B110B 520.00 NGB2B110B 1272.00 NGB3B110B 1613.00125 NGB1B125B 520.00 NGB2B125B 1272.00 NGB3B125B 1613.00Load lugs are included as standard.HACR rated.NGBSelectionShipping WeightsNumber of Number per ShippingPoles Carton Weight lbs. (kg)1 1 0.9 (0.4)2 1 1.9 (0.9)3 1 2.9 (1.2)Lugs For 60/75°C WireNGBAmpere Rating Wire Size Catalog Number List Price $15–30A #14–#6 AWG Cu#12–#6 AWG AlIntegral with breaker35–125A #8-#1/0 AWG Cu#8-#2/0 AWG AlIntegral with breaker6MOLDED CASECIRCUIT BREAKERSInterrupting Ratings (max. RMS symmetrical amperes kA)UL489IEC 60947-2 (lcs = 50% lcu)NumberBreaker ofVolts AC Volts DC Volts AC Volts DCType Poles 120 240 277 347 480Y/277 600Y/347 125 125/250 240 415 125/2501 100 — 25 14 — — 14 — 25 — —NGB2, 3 — 100 — — 25 14 — 14 65 25 1440°C, 50/60Hz. SWD rated. HID rated. 2-pole only.6-22Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersAccessories for CQD 100A Frame, NGG and NGB 125A Frame Shunt TripControl VoltageCQD, CQD6, NGG, NGB ListV AC V DC Catalog Number Price $120 — CQDST120 636.00240 — CQDST240▲ 636.00277 — CQDST277▲ 636.00480 — CQDST480▲ 636.00600 — CQDST600 636.00— 012 CQDST12 636.00— 024 CQDST24 636.00— 048 CQDST48 636.00— 125 CQDST125 636.00SelectionAuxiliary SwitchMaximum Number CQD, CQD6,VoltageofNGG, NGBAC DC Contacts Catalog Number List Price $240 125 1A–1B CQDA1 271.00240 125 2A–2B CQDA2 540.00Alarm SwitchMaximumCQD, CQD6,VoltageNGG, NGBAC DC Catalog Number List Price $240 125 CQDBA 271.00CQD with Accessory InstalledShunt Trip and Auxiliary SwitchCombinationsShunt TripCQD, CQD6,VoltageNGG, NGBAC DC Catalog Number List Price $24 CQDST24AAS▲ 897.00120 CQDST120AAS▲ 897.00240 CQDST240AAS▲ 897.00277 CQDST277AAS▲ 897.00480 CQDST480AAS▲ 897.00600 CQDST600AAS▲ 897.0012 CQDST12DAS▲ 897.0024 CQDST24DAS▲ 897.0048 CQDST48DAS▲ 897.00125 CQDST125DAS▲ 897.006MOLDED CASECIRCUIT BREAKERSAlarm and Auxiliary SwitchCombinationsFor Breaker Catalog Number List PriceCQD, CQD6, NGG, NGB CQDA1BA▲ 540.00▲ Built to order. Allow 6–8 weeks for delivery.Adds 1-pole space for accessory.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-23

Molded Case Circuit BreakersNEB & HEB FrameType NEB (Panelboard Mount)Selection1-Pole 2-Pole 3-PoleContinuous List List ListCurrent Rating Catalog Price Catalog Price Catalog Price@ 40°C Number $ Number $ Number $15 NEB1B015B 282.00 NEB2B015B 707.00 NEB3B015B 883.0020 NEB1B020B 282.00 NEB2B020B 707.00 NEB3B020B 883.0025 NEB1B025B 282.00 NEB2B025B 707.00 NEB3B025B 883.0030 NEB1B030B 282.00 NEB2B030B 707.00 NEB3B030B 883.0035 NEB1B035B 282.00 NEB2B035B 707.00 NEB3B035B 883.0040 NEB1B040B 282.00 NEB2B040B 707.00 NEB3B040B 883.0045 NEB1B045B 282.00 NEB2B045B 707.00 NEB3B045B 883.0050 NEB1B050B 282.00 NEB2B050B 707.00 NEB3B050B 883.0060 NEB1B060B 282.00 NEB2B060B 707.00 NEB3B060B 883.0070 NEB1B070B 321.00 NEB2B070B 803.00 NEB3B070B 1004.0080 NEB1B080B 321.00 NEB2B080B 803.00 NEB3B080B 1004.0090 NEB1B090B 321.00 NEB2B090B 803.00 NEB3B090B 1004.00100 NEB1B100B 321.00 NEB2B100B 803.00 NEB3B100B 1004.00110 NEB1B110B 710.00 NEB2B110B 1771.00 NEB3B110B 2214.00125 NEB1B125B 710.00 NEB2B125B 1771.00 NEB3B125B 2214.00Front viewHEBBack view6MOLDED CASECIRCUIT BREAKERSType HEB (Panelboard Mount)1-Pole 2-Pole 3-PoleContinuous List List ListCurrent Rating Catalog Price Catalog Price Catalog Price@ 40°C Number $ Number $ Number $15 HEB1B015B 394.00 HEB2B015B 918.00 HEB3B015B 1076.0020 HEB1B020B 394.00 HEB2B020B 918.00 HEB3B020B 1076.0025 HEB1B025B 394.00 HEB2B025B 918.00 HEB3B025B 1076.0030 HEB1B030B 394.00 HEB2B030B 918.00 HEB3B030B 1076.0035 HEB1B035B 394.00 HEB2B035B 918.00 HEB3B035B 1076.0040 HEB1B040B 394.00 HEB2B040B 918.00 HEB3B040B 1076.0045 HEB1B045B 394.00 HEB2B045B 918.00 HEB3B045B 1076.0050 HEB1B050B 394.00 HEB2B050B 918.00 HEB3B050B 1076.0060 HEB1B060B 394.00 HEB2B060B 918.00 HEB3B060B 1076.0070 HEB1B070B 467.00 HEB2B070B 1044.00 HEB3B070B 1198.0080 HEB1B080B 467.00 HEB2B080B 1044.00 HEB3B080B 1198.0090 HEB1B090B 467.00 HEB2B090B 1044.00 HEB3B090B 1198.00100 HEB1B100B 467.00 HEB2B100B 1044.00 HEB3B100B 1198.00110 HEB1B110B 980.00 HEB2B110B 2030.00 HEB3B110B 2433.00125 HEB1B125B 980.00 HEB2B125B 2030.00 HEB3B125B 2433.00Load lugs are included as standard.HACR rated.Shipping WeightsNumber of Number per ShippingPoles Carton Weight lbs. (kg)1 1 1.4 (0.5)2 1 2.4 (0.9)3 1 3.7 (1.4)Lugs For 60/75°C WireNEB/HEBAmpere Rating Wire Size Catalog Number List Price $15–100A #14–1/0 3TA1EG10 12.8060–125A #6–2/0 3TA1EG30 12.80Interrupting Ratings (max. RMS symmetrical amperes kA)UL489/CSAIEC 60947-2 (lcs = 50% lcu)NumberBreaker ofVolts AC Volts DC Volts AC Volts DCType Poles 240 277 347 480 600Y/347 125/250 240 415 125 125/2501 85 35 22 — — 35 85 — 35 —NEB2, 3 85 — — 35 22 35 85 40 — 35HEB40°C, 50/60Hz.1 100 65 25 — — 42 100 — 42 —2, 3 100 — — 65 25 42 100 70 — 42 SWD rated. HID rated.6-24Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersInternal Accessories for NEG & HEG 125A Frame, NEB & HEB 125A FrameShunt TripControl VoltageNEG, HEG, NEB, HEB ListV AC V DC Catalog Number Price $110-240 125 STRER240 636.00380-600 — STREV600 636.0024-60 24-60 STREM60D 636.00SelectionAuxiliary SwitchMaximum Number NEG, HEG,VoltageofNEB, HEBAC DC Contacts Catalog Number List Price $240 125 1A–1B ASKE2 271.00240 125 2A–2B ASKE3 540.00Alarm SwitchMaximum Number NEG, HEG,VoltageofNEB, HEBAC DC Contacts Catalog Number List Price $240 125 1A–1B ASKE1 271.00240 125 2A–2B ASKE5 540.00Undervoltage TripControlNEG, HEG,VoltageNEB, HEBAC DC Catalog Number List Price $60 UVREM60▲ 636.00120 UVREN120 636.00240 UVRER240 636.00480 UVREU480▲ 636.00600 UVREV600▲ 636.0012 12 UVREA12AD▲ 636.0024 24 UVREB24AD 636.0048 UVREC48D▲ 636.00125 UVRED125D▲ 636.00250 UVREE250D▲ 636.006MOLDED CASECIRCUIT BREAKERSAlarm and Auxiliary SwitchCombinationsFor Breaker Catalog Number List Price $NEG, HEG ASKE6 540.00▲ Built to order. Allow 6–8 weeks for delivery.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-25

Circuit BreakersLug-In/Lug-Out with INSTA-WIRESelectionAll BQ/BQH/HBQ circuit breakers are supplied with load side lugs. If line side lugs are required, add suffix “L” to catalog number. Consult Siemens for anyadditional charge. All standard circuit breakers are calibrated for 40(insert degree symbol)C maximum ambient application.1-Pole Plug-In (120V AC) ■ Built to order. Allow 2-36MOLDED CASECIRCUIT BREAKERSType BQ Type BQH Type HBQContinuous10,000A IR 22,000A IR 65,000A IRCurrent Rating Catalog List Catalog List Catalog List@ 40° C Number Price $ Number Price $ Number Price $10 BQ1B010 33.50 BQ1B010H — HB1B010 —15 BQ1B015 33.50 BQ1B015H 66.00 HB1B015■ 113.0020 BQ1B020 33.50 BQ1B020H 66.00 HB1B020■ 113.0025 BQ1B025 33.50 BQ1B025H■ 66.00 HB1B025■ 113.0030 BQ1B030 33.50 BQ1B030H 74.00 HB1B030■ 113.0035 BQ1B035■ 33.50 BQ1B035H■ 74.00 HB1B035■ 113.0040 BQ1B040 33.50 BQ1B040H 74.00 HB1B040■ 132.0045 BQ1B045■ 33.50 BQ1B045H■ 74.00 HB1B045■ 132.0050 BQ1B050 33.50 BQ1B050H 74.00 HB1B050■ 132.0060 BQ1B060■ 33.50 BQ1B060H■ 74.00 HB1B060■ 132.0070 BQ1B070■ 33.50 BQ1B070H■ 92.00 HB1B070■ 142.002-Pole Plug-In (Common-Trip 120/240V AC ) 10 BQ2B010 76.00 — — HB2B010■ 276.0015 BQ2B015 76.00 BQ2B015H 149.00 HB2B015■ 276.0020 BQ2B020 76.00 BQ2B020H 149.00 HB2B020■ 276.0025 BQ2B025 76.00 BQ2B025H■ 149.00 HB2B025■ 276.0030 BQ2B030 76.00 BQ2B030H 149.00 HB2B030■ 276.0035 BQ2B035 76.00 BQ2B035H■ 149.00 HB2B035■ 276.0040 BQ2B040 76.00 BQ2B040H 149.00 HB2B040■ 276.0045 BQ2B045 76.00 BQ2B045H■ 149.00 HB2B045■ 276.0050 BQ2B050 76.00 BQ2B050H 149.00 HB2B050■ 338.0060 BQ2B060 76.00 BQ2B060H 149.00 HB2B060■ 338.0070 BQ2B070 149.00 BQ2B070H■ 224.00 HB2B070■ 552.0080 BQ2B080 203.00 BQ2B080H■ 326.00 HB2B080 624.0090 BQ2B090 203.00 BQ2B090H■ 326.00 HB2B090■ 624.00100 BQ2B100 203.00 BQ2B100H 326.00 HB2B100 624.00110 BQ2B110 407.00 BQ2B110H 864.00 HB2B110■ 1794.00125 BQ2B125 431.00 BQ2B125H 1112.00 HB2B125 1794.002-Pole Plug-In (Common-Trip 240V AC) 15 BQ2H015 203.00 — — — —20 BQ2H020 203.00 — — — —30 BQ2H030 203.00 — — — —40 BQ2H040■ 203.00 — — — —50 BQ2H050 203.00 — — — —60 BQ2H060 203.00 — — — —70 BQ2H070■ 269.00 — — — —80 BQ2H080■ 306.00 — — — —90 BQ2H090■ 306.00 — — — —100 BQ2H100■ 306.00 — — — —1-Pole2-Pole3-Pole3-Pole Plug-In (Common-Trip 240V AC) 10 BQ3B010 254.00 — — HB3B010 480.0015 BQ3B015 254.00 BQ3B015H 381.00 HB3B015■ 480.0020 BQ3B020 254.00 BQ3B020H 381.00 HB3B020■ 480.0025 BQ3B025■ 254.00 BQ3B025H■ 381.00 HB3B025 480.0030 BQ3B030 254.00 BQ3B030H 381.00 HB3B030 480.0035 BQ3B035■ 254.00 BQ3B035H 381.00 HB3B035 480.0040 BQ3B040 254.00 BQ3B040H 381.00 HB3B040 584.0045 BQ3B045■ 254.00 BQ3B045H 381.00 HB3B045 584.0050 BQ3B050 254.00 BQ3B050H 381.00 HB3B050 584.0060 BQ3B060 254.00 BQ3B060H 381.00 HB3B060 584.0070 BQ3B070 311.00 BQ3B070H 463.00 HB3B070■ 624.0080 BQ3B080 351.00 BQ3B080H■ 543.00 HB3B080■ 734.0090 BQ3B090 351.00 BQ3B090H■ 543.00 HB3B090■ 734.00100 BQ3B100 351.00 BQ3B100H 543.00 HB3B100 734.00MP-T / MP-HT / MP-MT AccessoriesFactory ModificationsDescription Catalog Number Field/Factory Installed List Price $ Description Catalog Number List Price $120V Shunt Trip add suffix...00S01■ Factory 141.00(adder) Line Side Lugs add suffix...L Consult Siemens24V Shunt Trip add suffix...00S07■ Factory 141.00(adder) Quick Connect Lug add suffix...QX 7.50 (adder per pole)120V Auxiliary Switch add suffix...01■ Factory 83.00(adder)400Hz Calibration add suffix...Y 8.00 (adder)1-Pole Padlocking Device ECPLD1 Field 10.102-Pole Padlocking Device ECPLD2 Field 10.20415V 50Hz Calibration add suffix...E No adder3-Pole Padlocking Device ECQLD3 (Pkg of 10) Field 98.00 Marine 50˚ C AmbientHandle Block ECHBD1 Field 9.10Calibrationadd suffix...M No adderFungus Proofing add suffix...F 10.50 (adder per pole) UL Listed for use with 60/75° wire through 125 amps,HACR rated. 1A and 1B contacts. UL Listed for use on 3-phase grounded “B” systems —10,000 for this application. UL Listed for frequent switchingapplications (SWD). 120V AC Fluorescent Lighting. Shipped 12 per sleeve. Shipped 6 per sleeve. Shipped 4 per sleeve. UL Listed 5KA IR. Not UL Listed. 1 & 2 Poles only.weeks for delivery6-26 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersDIN Rail Mounted Circuit Breakers1-Pole DIN Rail (120V AC)“Interrupting Ratings (KA)(RMS Symmetrical Amperes)”Volts ACBreaker Ampere Catalog Load Side ListType Rating Number Connector Price $ 120 120/240“BQXD 10 BQ1B010QLD TC1Q1 33.50 101-Pole 15 BQ1B015QLD TC1Q1 33.50 10120V 20 BQ1B020QLD TC1Q1 33.50 10DIN Rail” 25 BQ1B025QLD TC1Q1 33.50 1030 BQ1B030QLD TC1Q1 33.50 1035 BQ1B035QLD TC1Q1 33.50 1040 BQ1B040QLD TC1Q1 33.50 1045 BQ1B045QLD TA1Q1 33.50 1050 BQ1B050QLD TA1Q1 33.50 1060 BQ1B060QLD TA1Q1 33.50 1010 BQ1B010QXD Quick-Connect 39.50 1015 BQ1B015QXD Quick-Connect 39.50 1020 BQ1B020QXD Quick-Connect 39.50 1025 BQ1B025QXD Quick-Connect 39.50 1030 BQ1B030QXD Quick-Connect 39.50 1035 BQ1B035QXD Quick-Connect 39.50 1040 BQ1B040QXD Quick-Connect 39.50 1045 BQ1B045QXD Quick-Connect 39.50 1050 BQ1B050QXD Quick-Connect 39.50 1060 BQ1B060QXD Quick-Connect 39.50 102-Pole DIN Rail (120/240V AC)“BQXD 10 BQ2B010QLD TC1Q1 76.00 102-Pole 15 BQ2B015QLD TC1Q1 76.00 10120/240V 20 BQ2B020QLD TC1Q1 76.00 10DIN Rail” 25 BQ2B025QLD TC1Q1 76.00 1030 BQ2B030QLD TC1Q1 76.00 1035 BQ2B035QLD TC1Q1 76.00 1040 BQ2B040QLD TC1Q1 76.00 1045 BQ2B045QLD TA1Q1 76.00 1050 BQ2B050QLD TA1Q1 76.00 1060 BQ2B060QLD TA1Q1 76.00 1010 BQ2B010QXD Quick-Connect 91.00 1015 BQ2B015QXD Quick-Connect 91.00 1020 BQ2B020QXD Quick-Connect 91.00 1025 BQ2B025QXD Quick-Connect 91.00 1030 BQ2B030QXD Quick-Connect 91.00 1035 BQ2B035QXD Quick-Connect 91.00 1040 BQ2B040QXD Quick-Connect 91.00 1045 BQ2B045QXD Quick-Connect 91.00 1050 BQ2B050QXD Quick-Connect 91.00 1060 BQ2B060QXD Quick-Connect 91.00 10Lugs-For Use with BQ, BQH, HBQ Circuit Cab. Lug ListBreaker Per Wire Range Catalog Price $Amp. Rtg. Lug AWG Number (Qty. 6)Line Side10–4011#16–#6 Cu#12–#6 AlTC1Q1 2.6045–10011#8–#1 Cu#6–#1/0 AlTA1Q1 2.60Load Side10 2 #16 Cu15–2011#14–#10 Cu#12–#10 Al25–3511#14–#6 Cu#12–#10 Al40–501 #8–#6 Cu Connectors are1 #8–#4 Al Supplied with55–701 #8–#4 Cu Circuit Breaker1 #8–#2 Al80–10011#4–#1/0 Cu#2–#1/0 Al110–12511#2–#1/0 Cu#1/0–#2/0 AlFor inches / millimeters conversion,see Application Data section.■ Built to order. Allow 2–3 weeks for delivery.Terminals are UL Listed for 60°/75°C conductors. AlsoCSA Listed.Connector has steel construction.Discount Schedule MCCBBQ1B015QLDBQ1B015QXDSelection/DimensionsBQ2B015QLDBQ2B015QXDBreakerDimensions (inches)Type Amperes L D1 D2BQ, BQH 15–50 3 3 ⁄4 2 3 ⁄8 3BQ, BQH 55–125 4 2 3 ⁄8 3HBQ 15–125 4 2 3 ⁄8 3BQXD 15–60 4 1 ⁄2 2 3 ⁄8 3Finger Safe Terminal ShieldProtects against accidental contact with lugs–1 per lug. Fits line and load end.Catalog Number Qty List Price $ eachBQFS2 2 2.10BQFS1K 1000 1.40EnclosuresType Catalog Number List Price $ 1 EB3100S 189.003R WB3100 249.00Surface mounted indoor. If flush mounting is required, Type BQXD uses TA1Q1 or TC1Q1 lugs on line side ofreplace suffix “S” in catalog number with suffix “F”.circuit breaker.Discount Schedule B.Does not include circuit breaker. Order circuit breakerseparately.Enclosures Section 5 Neutral included in enclosure.Accessories pages 6-86 to 6-91Enclosure will not accept circuit breakers with shunttrips or auxiliary switches installed.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-276MOLDED CASECIRCUIT BREAKERS

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersQJ 225A FrameType QJ2 2-Pole 3-PoleType QJH2 Type QJ2H Continuous 240V AC 240V ACCurrent Rating Catalog List Catalog List@ 40°C Number Price $ Number Price $060 QJ22B060■ 422.00 QJ23B060 1106.00070 QJ22B070■ 422.00 QJ23B070 1106.00080 QJ22B080■ 422.00 QJ23B080■ 1106.00090 QJ22B090■ 422.00 QJ23B090■ 1106.00100 QJ22B100 422.00 QJ23B100 1106.00110 QJ22B110■ 422.00 QJ23B110 1106.00125 QJ22B125 422.00 QJ23B125 1106.00150 QJ22B150 422.00 QJ23B150 1106.00175 QJ22B175 422.00 QJ23B175 1106.00200 QJ22B200 422.00 QJ23B200 1106.00225 QJ22B225 422.00 QJ23B225 1106.00Type HQJ2H 060 QJH22B060■ 1010.00 QJH23B060■ 1548.00070 QJH22B070■ 1010.00 QJH23B070■ 1548.00080 QJH22B080■ 1010.00 QJH23B080■ 1548.00090 QJH22B090■ 1010.00 QJH23B090■ 1548.00100 QJH22B100■ 1010.00 QJH23B100 1548.00110 QJH22B110■ 1010.00 QJH23B110 1548.00125 QJH22B125 1010.00 QJH23B125 1548.00150 QJH22B150 1010.00 QJH23B150 1548.00175 QJH22B175■ 1010.00 QJH23B175 1548.00200 QJH22B200 1010.00 QJH23B200 1548.00225 QJH22B225 1010.00 QJH23B225 1548.00060 QJ22B060H■ 1255.00 QJ23B060H■ 1964.00070 QJ22B070H■ 1255.00 QJ23B070H■ 1964.00080 QJ22B080H■ 1255.00 QJ23B080H■ 1964.00090 QJ22B090H■ 1255.00 QJ23B090H■ 1964.00100 QJ22B100H■ 1255.00 QJ23B100H 1964.00110 QJ22B110H■ 1255.00 QJ23B110H■ 1964.00125 QJ22B125H 1255.00 QJ23B125H 1964.00150 QJ22B150H 1255.00 QJ23B150H 1964.00175 QJ22B175H■ 1255.00 QJ23B175H 1964.00200 QJ22B200H 1255.00 QJ23B200H 1964.00225 QJ22B225H 1255.00 QJ23B225H 1964.00100 — — HQJ23B100H ▲2234.00110 — — HQJ23B110H ▲2234.00125 — — HQJ23B125H ▲2234.00150 — — HQJ23B150H 2234.00175 — — HQJ23B175H ▲2234.00200 — — HQJ23B200H 2234.00225 — — HQJ23B225H ▲2234.00Selection/DimensionsOrdering InformationLoad side TA1Q300 lugs are mounted andincluded when circuit breaker is ordered.For line and load lugs (TA1Q300) installed atno additional charge, add suffix “L” to catalognumber.50°C Calibration - See page 6-84.400HZ. - See page 6-84.Shipping WeightsQJ2, QJH2, QJ2H, HQJ2HNumber of Number per ShippingPoles Carton Weight (lbs.)2 10 303 10 41Lugs For 75°C Wire Catalog Lug LugNumber Body Wire RangeTA1Q300 Al(1) #6—300 kcmil Cu(1) #4—300 kcmil AlTC1Q250 Cu (1) #6—250 kcmil CuEnclosures (Neutral Included)CatalogListType Number Price $1 EB3225(S)(F) 226.003R (2-pole) WB2225 418.003R (3-pole) WB3225 459.00UL 489 Interrupting RatingsBreakerTypeAIR @ 240V ACQJ2 010,000QJH2 022,000QJ2H 042,000HQJ2H 100,0007''QJ2Internal Accessories (Factory installed only) (3-pole only) Add suffix to catalog number and adder to list price.3''2-pole4.5'' 3-poleAuxiliary SwitchesShunt Trip andControl Voltage Shunt Trip 1A and 1B 2A and 2B 1A and 1B Auxiliary SwitchAC DC Suffix List Adder $ Suffix List Adder $ Suffix List Adder $ Suffix List Adder $120/240 00S01■ 325. A01■ 265. A02■ 532. 01S01■ 590.24 00S07■ 325. A01■ 265. A02■ 532. 01S07■ 590.125 00S11■ 325. A01■ 265. A02■ 532. 01S11■ 590.D2.53''■ Built to order. Allow 2–3 weeks for delivery.▲ Built to order. Allow 6–8 weeks for delivery. See Note: A page 6-73.Note: QJ breakers are UL Listed for reverse feedapplications. HACR rated. Internal accessories are not available on 2-pole QJbreakers.Enclosures Section 5Accessories pages 6-86 to 6-916-28Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersCQD 100A FrameType CQD (Cable In - Cable Out) DIN Rail Mount 1-Pole 2-Pole 3-Pole480Y/277V ACContinuous 277V AC 125V DC 125/250V DC 480Y/277V ACCurrent Rating Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $115 CQD115 140.00 CQD215 305.00 CQD315 543.00120 CQD120 140.00 CQD220 305.00 CQD320 543.00125 CQD125 140.00 CQD225 305.00 CQD325 543.00130 CQD130 140.00 CQD230 305.00 CQD330 543.00135 CQD135 ■ 140.00 CQD235 ■ 305.00 CQD335 543.00140 CQD140 ■ 140.00 CQD240 305.00 CQD340 543.00145 CQD145 ■ 140.00 CQD245 ■ 305.00 CQD345 ■ 543.00150 CQD150 ■ 140.00 CQD250 305.00 CQD350 543.00160 CQD160■ 140.00 CQD260 305.00 CQD360 543.00170 CQD170■ 256.00 CQD270 606.00 CQD370 735.00180 CQD180■ 256.00 CQD280 606.00 CQD380 735.00190 CQD190■ 256.00 CQD290■ 606.00 CQD390 735.00100 CQD1100■ 256.00 CQD2100 606.00 CQD3100 735.00Selection/DimensionsShipping WeightsNumber of Number per ShippingPoles Carton Weight lbs. (kg)1 1 0.5 (0)2 1 1.0 (0)3 1 1.5 (1)Lugs For 60/75°C WireAmpsWire Size15–40 #14–#6 AWG Cu#12–#6 AWG Al45–100 #8–#1 AWG Cu#6–#1/0 AWG AlType CQD6 (Cable In - Cable Out) CSA Certified, not UL1-Pole 2-Pole 3-Pole347V AC600Y/347V ACContinuous 125V DC 125/250V DC 600Y/347V ACCurrent Rating Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $115 — — CQD6215■ 305.00 CQD6315■ 543.00120 CQD6120 ■ 140.00 CQD6220■ 305.00 CQD6320■ 543.00125 CQD6125 ■ 140.00 CQD6225■ 305.00 CQD6325■ 543.00130 CQD6130 ■ 140.00 CQD6230■ 305.00 CQD6330■ 543.00135 CQD6135■ 140.00 CQD6235■ 305.00 CQD6335■ 543.00140 CQD6140■ 140.00 CQD6240■ 305.00 CQD6340■ 543.00145 CQD6145■ 140.00 CQD6245■ 305.00 CQD6345■ 543.00150 CQD6150■ 140.00 CQD6250■ 305.00 CQD6350■ 543.00160 CQD6160■ 140.00 CQD6260■ 305.00 CQD6360■ 543.00170 CQD6170■ 256.00 CQD6270■ 606.00 — —Interrupting RatingsRMS Symmetrical Amperes (KA)Breaker NumberVolts AC (50/60 Hz)Volts DCType of Poles 120 240 277 480/277 600/347 125 125/250CQD(UL)CQD6(CSA)1 65 — 14 — — 14 —2 — 65 — 14 — — 143 — 65 — 14 — — —1 65 — 14 — 10 14 —2 — 65 — — 10 — 143 — 65 — — 10 — —CQD, CQD6CQD, CQD64.96MOLDED CASECIRCUIT BREAKERSFor inches / millimeters conversion, see Application Data section.■ Built to order. Allow 2–3 weeks for delivery. SWD rated.Note: CQD breakers are UL Listed for reverse feedapplications. HID rated. HACR rated.Enclosures Section 5Accessories pages 6-31 and 6-86 to 6-91Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-29

Molded Case Circuit BreakersNGG 125A FrameType NGG (Cable In - Cable Out)1-Pole 2-Pole 3-PoleContinuous List List ListAmpere Rating Catalog Price Catalog Price Catalog Price@ 40°C Number $ Number $ Number $15 NGG1B015L 161.00 NGG2B015L 504.00 NGG3B015L 660.0020 NGG1B020L 161.00 NGG2B020L 504.00 NGG3B020L 660.0025 NGG1B025L 161.00 NGG2B025L 504.00 NGG3B025L 660.0030 NGG1B030L 161.00 NGG2B030L 504.00 NGG3B030L 660.0035 NGG1B035L 161.00 NGG2B035L 504.00 NGG3B035L 660.0040 NGG1B040L 161.00 NGG2B040L 504.00 NGG3B040L 660.0045 NGG1B045L 161.00 NGG2B045L 504.00 NGG3B045L 660.0050 NGG1B050L 161.00 NGG2B050L 504.00 NGG3B050L 660.0060 NGG1B060L 161.00 NGG2B060L 504.00 NGG3B060L 660.0070 NGG1B070L 271.00 NGG2B070L 669.00 NGG3B070L 777.0080 NGG1B080L 271.00 NGG2B080L 669.00 NGG3B080L 777.0090 NGG1B090L 271.00 NGG2B090L 669.00 NGG3B090L 777.00100 NGG1B100L 271.00 NGG2B100L 669.00 NGG3B100L 777.00110 NGG1B110L 547.00 NGG2B110L 1339.00 NGG3B110L 1544.00125 NGG1B125L 547.00 NGG2B125L 1339.00 NGG3B125L 1544.00Line and load lugs are included as standard. If no lugs are required, remove the “L” suffix.HACR rated.Suitable for screws or DIN rail mounting.Shipping WeightsNumber of Number per ShippingPoles Carton Weight lbs. (kg)1 1 .75 (0.34)2 1 1.3 (0.59)3 1 2.0 (0.98)Selection/DimensionsNGG2.95.4NGG6MOLDED CASECIRCUIT BREAKERSLugs For 60/75°C WireNGGAmpere Rating Wire Size Catalog Number List Price $15–30A #14–#6 AWG Cu TC1Q1 (qty. 1) 2.60#12–#6 AWG Al 3TC1Q1 (qty. 3) 7.2035–125A #8–#1/0 AWG Cu#4–#2/0 AWG Al3TC1GG20 (qty. 3) 13.4015–125A Nut Keeper plate w/ screw(for crimp terminals)TNKG3 (qty. 3) 17.90Interrupting RatingsUL 489 AIR IEC 947-2RMS Symmetrical Amperes (KA)Volts AC (50/60Hz)NumberBreaker ofVolts AC(50/60Hz) Volts DC 220/240 380/415 Volts DCType Poles 120 240 277 347 480 600/347 125 125/250 lcu lcs lcu lcs 125/25001 65 — 25 14 — 0— 14 — 25 12.5 — — —NGG2, 3 0— 65 — — 25 14 0— 14 65 33 25 12.5 14For inches / millimeters conversion, see Application Data section. SWD rated. HID rated at 15-50A 1-pole @ 277 VAC; 2 & 3-pole @480 VAC 125/250V DC rating applies to 2-pole NGG only.Enclosures Section 5Accessories pages 6-31 and 6-86 to 6-916-30Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersAccessories for CQD 100A Frame, NGG and NGB 125A Frame Shunt TripControl VoltageCQD, CQD6, NGG, NGB ListV AC V DC Catalog Number Price $120 — CQDST120 636.00240 — CQDST240▲ 636.00277 — CQDST277▲ 636.00480 — CQDST480▲ 636.00600 — CQDST600 636.00— 012 CQDST12 636.00— 024 CQDST24 636.00— 048 CQDST48 636.00— 125 CQDST125 636.00SelectionAuxiliary SwitchMaximum Number CQD, CQD6,VoltageofNGG, NGBAC DC Contacts Catalog Number List Price $240 125 1A–1B CQDA1 271.00240 125 2A–2B CQDA2 540.00Alarm SwitchMaximumCQD, CQD6,VoltageNGG, NGBAC DC Catalog Number List Price $240 125 CQDBA 271.00CQD with Accessory InstalledShunt Trip and Auxiliary SwitchCombinationsShunt TripCQD, CQD6,VoltageNGG, NGBAC DC Catalog Number List Price $24 CQDST24AAS▲ 897.00120 CQDST120AAS▲ 897.00240 CQDST240AAS▲ 897.00277 CQDST277AAS▲ 897.00480 CQDST480AAS▲ 897.00600 CQDST600AAS▲ 897.0012 CQDST12DAS▲ 897.0024 CQDST24DAS▲ 897.0048 CQDST48DAS▲ 897.00125 CQDST125DAS▲ 897.006MOLDED CASECIRCUIT BREAKERSAlarm and Auxiliary SwitchCombinationsFor Breaker Catalog Number List PriceCQD, CQD6, NGG, NGB CQDA1BA▲ 540.00▲ Built to order. Allow 6–8 weeks for delivery.Adds 1-pole space for accessory.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-31

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersEG 125A FrameType NEG (Cable In - Cable Out)1-Pole 2-Pole 3-Pole 4-PoleContinuous List List List ListAmpere Rating Catalog Price Catalog Price Catalog Price Catalog Price@ 40°C Number $ Number $ Number $ Number $15 NEG1B015L 297.00 NEG2B015L 743.00 NEG3B015L 930.00 NEG4B015L 1210.0020 NEG1B020L 297.00 NEG2B020L 743.00 NEG3B020L 930.00 NEG4B020L 1210.0025 NEG1B025L 297.00 NEG2B025L 743.00 NEG3B025L 930.00 NEG4B025L 1210.0030 NEG1B030L 297.00 NEG2B030L 743.00 NEG3B030L 930.00 NEG4B030L 1210.0035 NEG1B035L 297.00 NEG2B035L 743.00 NEG3B035L 930.00 NEG4B035L 1210.0040 NEG1B040L 297.00 NEG2B040L 743.00 NEG3B040L 930.00 NEG4B040L 1210.0045 NEG1B045L 297.00 NEG2B045L 743.00 NEG3B045L 930.00 NEG4B045L 1210.0050 NEG1B050L 297.00 NEG2B050L 743.00 NEG3B050L 930.00 NEG4B050L 1210.0060 NEG1B060L 297.00 NEG2B060L 743.00 NEG3B060L 930.00 NEG4B060L 1210.0070 NEG1B070L 338.00 NEG2B070L 845.00 NEG3B070L 1056.00 NEG4B070L 1376.0080 NEG1B080L 338.00 NEG2B080L 845.00 NEG3B080L 1056.00 NEG4B080L 1376.0090 NEG1B090L 338.00 NEG2B090L 845.00 NEG3B090L 1056.00 NEG4B090L 1376.00100 NEG1B100L 338.00 NEG2B100L 845.00 NEG3B100L 1056.00 NEG4B100L 1376.00110 NEG1B110L 747.00 NEG2B110L 1864.00 NEG3B110L 2330.00 NEG4B110L 3029.00125 NEG1B125L 747.00 NEG2B125L 1864.00 NEG3B125L 2330.00 NEG4B125L 3029.00Type HEG (Cable In - Cable Out)1-Pole 2-Pole 3-Pole 4-PoleContinuous List List List ListAmpere Rating Catalog Price Catalog Price Catalog Price Catalog Price@ 40°C Number $ Number $ Number $ Number $15 HEG1B015L 414.00 HEG2B015L 966.00 HEG3B015L 1133.00 HEG4B015L 1474.0020 HEG1B020L 414.00 HEG2B020L 966.00 HEG3B020L 1133.00 HEG4B020L 1474.0025 HEG1B025L 414.00 HEG2B025L 966.00 HEG3B025L 1133.00 HEG4B025L 1474.0030 HEG1B030L 414.00 HEG2B030L 966.00 HEG3B030L 1133.00 HEG4B030L 1474.0035 HEG1B035L 414.00 HEG2B035L 966.00 HEG3B035L 1133.00 HEG4B035L 1474.0040 HEG1B040L 414.00 HEG2B040L 966.00 HEG3B040L 1133.00 HEG4B040L 1474.0045 HEG1B045L 414.00 HEG2B045L 966.00 HEG3B045L 1133.00 HEG4B045L 1474.0050 HEG1B050L 414.00 HEG2B050L 966.00 HEG3B050L 1133.00 HEG4B050L 1474.0060 HEG1B060L 414.00 HEG2B060L 966.00 HEG3B060L 1133.00 HEG4B060L 1474.0070 HEG1B070L 492.00 HEG2B070L 1098.00 HEG3B070L 1260.00 HEG4B070L 1638.0080 HEG1B080L 492.00 HEG2B080L 1098.00 HEG3B080L 1260.00 HEG4B080L 1638.0090 HEG1B090L 492.00 HEG2B090L 1098.00 HEG3B090L 1260.00 HEG4B090L 1638.00100 HEG1B100L 492.00 HEG2B100L 1098.00 HEG3B100L 1260.00 HEG4B100L 1638.00110 HEG1B110L 1031.00 HEG2B110L 2136.00 HEG3B110L 2561.00 HEG4B110L 3330.00125 HEG1B125L 1031.00 HEG2B125L 2136.00 HEG3B125L 2561.00 HEG4B125L 3330.00Line and load lugs are included as standard.HACR rated.Suitable for screw mounting.Shipping WeightsNumber of Number per ShippingPoles Carton Weight lbs. (kg)1 1 1.1 (0.5)2 1 2.0 (0.9)3 1 3.1 (1.4)4 1 3.9 (1.8)Lugs For 60/75°C WireSelection/DimensionsHEGNEG, HEGNEG/HEGAmpere Rating Wire Size Catalog Number List Price $15–125A #14 – 3/0 AWG Cu (steel lugs) 3TW1EG30 (qty. 3) 12.8015–125A #14 – 1/0 AWG Cu#14 – 1/0 AWG Al3TA1EG10 (qty. 3) 12.8015–125A #6 - 3/0 AWG Cu#6 - 3/0 AWG AI3TA1EG30 (qty. 3) 12.8015–125A Nut Keeper plate w/ screw(for crimp terminals)TNKE3 (qty. 3) 12.303.05.5Interrupting RatingsUL 489 AIR IEC 60947-2RMS Symmetrical Amperes (KA)Volts AC (50/60Hz)NumberBreaker ofVolts AC(50/60Hz) Volts DC 220/240 380/415 Volts DCType Poles 240 277 347 480 600/347 125 125/250 lcu lcs lcu lcs 125 125/250NEG01 085 35 22 — — 35 — 85 43 — — 35 —2, 3, 4 085 — — 35 22 — 35 85 43 40 20 — 35HEG01 0100 65 25 — — 42 — 100 50 — — 42 —2, 3, 4 0100 — — 65 25 — 42 100 50 70 35 — 42For inches / millimeters conversion, see Application Data section. SWD rated. HID rated 277 VAC.6-32 Applies to 3 & 4-pole breakers only. Optional lugs for NEG and HEGbreakers.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogAccessories pages 6-33 and 6-86 to 6-91Discount Schedule MCCB

Molded Case Circuit BreakersInternal Accessories for NEG and HEG 125A FrameShunt TripControl VoltageNEG, HEGV AC V DC Catalog Number List Price $110-240 125 STRER240 636.00380-600 — STREV600 636.0024-60 24-60 STREM60D 636.00SelectionAuxiliary SwitchMaximum NumberVoltageofNEG, HEGAC DC Contacts Catalog Number List Price $240 125 1A–1B ASKE2 271.00240 125 2A–2B ASKE3 540.00Alarm SwitchMaximum NumberVoltageofNEG, HEGAC DC Contacts Catalog Number List Price $240 125 1A–1B ASKE1 271.00240 125 2A–2B ASKE5 540.00Undervoltage TripControlVoltageNEG, HEGAC DC Catalog Number List Price $60 UVREM60▲ 636.00120 UVREN120 636.00240 UVRER240 636.00480 UVREU480▲ 636.00600 UVREV600▲ 636.0024 24 UVREB24AD 636.0048 UVREC48D▲ 636.00125 UVRED125D▲ 636.00250 UVREE250D▲ 636.006MOLDED CASECIRCUIT BREAKERSAlarm and Auxiliary SwitchCombinationsFor Breaker Catalog Number List Price $NEG, HEG ASKE6 540.00▲ Built to order. Allow 6–8 weeks for delivery.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-33

Molded Case Circuit BreakersED 125A Frame Sentron SeriesSelectionOrdering InstructionsAll ED Frame Sentron circuit breakers are supplied with load side lugs. If line side lugs are required, add ”L” suffix to catalog number.Consult Siemens sales office for any addditional charge50°C Calibration, 400HZ - see page 6-84. All ED frame circuit breakers may be reverse connected6MOLDED CASECIRCUIT BREAKERSType ED2 1-Pole 2-Pole 3-Pole125V DCContinuous 120V AC 125V DC 240V AC 250V DC 240V ACCurrent Rating Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $015 ED21B015 ■ 125.00 ED22B015 288.00 ED23B015 428.00020 ED21B020 ■ 125.00 ED22B020 288.00 ED23B020 428.0025 ED21B025■ 125.00 ED22B025■ 288.00 ED23B025■ 428.00030 ED21B030■ 125.00 ED22B030 288.00 ED23B030 428.0035 ED21B035■ 125.00 ED22B035■ 288.00 ED23B035■ 428.00040 ED21B040■ 125.00 ED22B040 288.00 ED23B040 428.0045 ED21B045■ 125.00 ED22B045■ 288.00 ED23B045■ 428.00050 ED21B050■ 125.00 ED22B050 288.00 ED23B050 428.00060 ED21B060■ 125.00 ED22B060 288.00 ED23B060 428.00070 ED21B070■ 230.00 ED22B070 470.00 ED23B070 613.0080 ED21B080■ 230.00 ED22B070■ 470.00 ED23B080 613.0090 ED21B090■ 230.00 ED22B090■ 470.00 ED23B090■ 613.00100 ED21B100■ 230.00 ED22B100 470.00 ED23B100 613.00Type ED4 1-Pole 2-Pole 3-Pole120V ACContinuous 277V AC 125V DC 480V AC 250V DC 480V ACCurrent Rating Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $015 ED41B015 170.00 ED42B015 521.00 ED43B015 684.00020 ED41B020 170.00 ED42B020 521.00 ED43B020 684.00025 ED41B025 170.00 ED42B025 521.00 ED43B025 684.00030 ED41B030 170.00 ED42B030 521.00 ED43B030 684.00035 ED41B035■ 170.00 ED42B035■ 521.00 ED43B035 684.00040 ED41B040 170.00 ED42B040 521.00 ED43B040 684.00045 ED41B045■ 170.00 ED42B045■ 521.00 ED43B045 684.00050 ED41B050 170.00 ED42B050 521.00 ED43B050 684.00060 ED41B060 170.00 ED42B060 521.00 ED43B060 684.00070 ED41B070 289.00 ED42B070 686.00 ED43B070 804.00080 ED41B080■ 289.00 ED42B080■ 686.00 ED43B080 804.00090 ED41B090■ 289.00 ED42B090■ 686.00 ED43B090 804.00100 ED41B100 289.00 ED42B100 686.00 ED43B100 804.00110 — — ED42B110■ 1386.00 ED43B110 1594.00125 — — ED42B125 1386.00 ED43B125 1594.00Blue LabelType ED6 1-Pole 2-Pole 3-PoleContinuous 347V AC 600V AC 250V DC 600V AC 500V DCCurrent Rating Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $015 ED61B015 349.00 ED62B015 613.00 ED63B015 778.00020 ED61B020 349.00 ED62B020 613.00 ED63B020 778.00025 ED61B025 349.00 ED62B025■ 613.00 ED63B025 778.00030 ED61B030 349.00 ED62B030 613.00 ED63B030 778.00035 ED61B035 349.00 ED62B035■ 613.00 ED63B035 778.00040 ED61B040 349.00 ED62B040■ 613.00 ED63B040 778.00045 ED61B040■ 349.00 ED62B045■ 613.00 ED63B045 778.00050 ED61B050 349.00 ED62B050■ 613.00 ED63B050 778.00060 ED61B060 349.00 ED62B060■ 613.00 ED63B060 778.00070 ED61B070■ 480.00 ED62B070■ 773.00 ED63B070 973.00080 ED61B080 480.00 ED62B080■ 773.00 ED63B080 973.00090 ED61B090 480.00 ED62B090■ 773.00 ED63B090 973.00100 ED61B100■ 480.00 ED62B100■ 773.00 ED63B100 973.00110 — — — — ED63B110 1872.00125 — — — — ED63B125 1872.00Note: ED frame circuit breakers qualified to UL 489Supplement SB “Naval”— See page 6-84 for additionalinformation■ Built to order. Allow 2–3 weeks for delivery.Blue LabelBlue LabelCSA Certified only (Not UL)For CED types and all 110–125 ampere ED frames. See Note: A, page 6-81. SWD rated. HACR rated.Shipping WeightsNumber of Number per ShippingPoles Carton Weight (lbs.)ED2, ED4, ED6, HED4, HHED61 30 382 10 253 10 38CED62 5 203 5 30LugsAmpere No. of Catalog WireRating Poles Number RangeAluminum Body LugsAll 15–25A 1, 2, 3Line/LoadSA1E025All 30–100A 1, 2, 3Line SideLN1E100ED2, 4, CED6Load Side130–60A LD1E060ED2, 4, CED6Load Side170–100A LD1E100ED2, 4, 6,HED4, HHED6 2, 3Load SideLN1E10030–100AAll 110, 125A 2, 3Line/LoadTA1E6125Copper Body LugsAll 30–125A 1, 2, 3Compression LugsLine/LoadTC1ED6150 All ED, HHED, CED CCE125 2/0#14–#10 Cu#12–#10 Al#10–1/0 Cu/Al#10–#4 Cu/Al#6–#1/0 Cu/Al#10–1/0 Cu/Al#3–3/0 Cu#1–2/0 Al#10–1/0 Cu onlyEnclosures (Neutral Included)Type Catalog Number List Price $1 (Surface) E2N1S (15–100A) 149.001 (Flush) E2N1F (15–100A) 149.003R E2N3R (15–100A) 410.004–4X ED6SS4 (15–100A) 2841.007–9 EA (15–60A) 1750.007–9 EB (70–100A) 2176.0012 E2N12 (15–100A) 254.001 (Surface) CED6N1S 271.001 (Flush) CED6N1F 271.003R CED6N3R 725.0012 CED6N12 449.00Modifications page 6-84Enclosures Section 5Accessories pages 6-36 and 6-86 to 6-916-34Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersED 125A Frame Sentron SeriesType HED4 1-Pole 2-Pole 3-PoleBlack LabelSelection/DimensionsFIGURE1 - ED, HED, HHEDContinuous 277V AC 125V DC 480V AC 250V DC 480V ACCurrent Rating Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $015 HED41B015 397.00 HED42B015 929.00 HED43B015 1140.00020 HED41B020 397.00 HED42B020 929.00 HED43B020 1140.00025 HED41B025 397.00 HED42B025■ 929.00 HED43B025 1140.00030 HED41B030 397.00 HED42B030 929.00 HED43B030 1140.00035 HED41B035■ 397.00 HED42B035■ 929.00 HED43B035 1140.00040 HED41B040 397.00 HED42B040 929.00 HED43B040 1140.00045 HED41B045■ 397.00 HED42B045■ 929.00 HED43B045 1140.00050 HED41B050■ 397.00 HED42B050 929.00 HED43B050 1140.00060 HED41B060■ 397.00 HED42B060■ 929.00 HED43B060 1140.00070 HED41B070■ 449.00 HED42B070■ 1070.00 HED43B070 1227.00080 HED41B080■ 449.00 HED42B080■ 1070.00 HED43B080 1227.00090 HED41B090■ 449.00 HED42B090■ 1070.00 HED43B090 1227.00100 HED41B100■ 449.00 HED42B100■ 1070.00 HED43B100 1227.00110 — — HED42B110■ 2176.00 HED43B110 2510.00125 — — HED42B125■ 2176.00 HED43B125 2510.00Type HHED6 Black LabelFuseless Current LimitingType CED6 Red Label2-Pole 3-Pole 2-Pole 3-PoleContinuousCurrent 600V AC 600V AC 600V AC, 250V DC 600V AC, 500V DC Rating Catalog List Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $ Number Price $015 HHED62B015■ 1010.00 HHED63B015 1183.00 CED62B015 2756.00 CED63B015 3200.00020 HHED62B020■ 1010.00 HHED63B020 1183.00 CED62B020■ 2756.00 CED63B020 3200.00025 HHED62B025■ 1010.00 HHED63B025 1183.00 — — — ——030 HHED62B030■ 1010.00 HHED63B030 1183.00 CED62B030■ 2756.00 CED63B030 3200.00035 HHED62B035■ 1010.00 HHED63B035 1183.00 — — — ——040 HHED62B040■ 1010.00 HHED63B040 1183.00 CED62B040■ 2756.00 CED63B040 3200.00045 HHED62B045■ 1010.00 HHED63B045 1183.00 — —— — ——050 HHED62B050■ 1010.00 HHED63B050 1183.00 CED62B050■ 2756.00 CED63B050 3200.00060 HHED62B060■ 1010.00 HHED63B060 1183.00 CED62B060■ 2756.00 CED63B060 3200.00070 HHED62B070■ 1174.00 HHED63B070 1344.00 CED62B070■ 2756.00 CED63B070 3200.00080 HHED62B080■ 1174.00 HHED63B080 1344.00 CED62B080■ 2756.00 CED63B080 3200.00090 HHED62B090■ 1174.00 HHED63B090 1344.00 CED62B090■ 2756.00 CED63B090 3200.00100 HHED62B100■ 1174.00 HHED63B100 1344.00 CED62B100■ 2756.00 CED63B100 3200.00110 HHED62B110■ 2262.00 HHED63B110 2633.00 — — CED63B110■ 4885.00125 HHED62B125■ 2262.00 HHED63B125 2633.00 CED62B125■ 4135.00 CED63B125 4885.00Interrupting Ratings1-POLE 2-POLE 3-POLEFIGURE 2 - CED (3-Pole shown)Breaker Type W1 W2 W3 H D D1Figure 1ED2, ED4, ED6, HED4, 1 2 3 6.35 3.92 4.56ED6 ETI Figure 1HHED6— 2 3 6.53 3.92 4.56Figure 2CED6, CED6 ETI — 2 3 9.58 3.92 4.56UL 489 AIR (File #E10848) IEC 947-2RMS Symmetrical Amperes (KA)Volts AC (50/60Hz)BreakerVolts AC Volts DC 220/240 380/415 500Type 120 240 277 347 480 600 125 250 500 lcu lcs lcu lcs lcu lcsED2 (1-P) 010 — — — — — 05 — — — — — — — —ED2 (2, 3-P) — 010 — — — — — 05 (2-P) — — — — — — —ED4 (1-P) 065 — 22 — — — 30 — — — — — — — —ED4 (2, 3-P) — 065 — — 18 — — 30 (2-P) — — — — — — —ED6 (1P) — — — 30 — — — — — — — — — — —ED6 (2, 3-P) — 065 — — 25 18 — 18 (3-P) 65 17 35 9 18 5HED4 (1-P)(15–30A) 100 — 65 — — — 30 — — — — — — — —HED4 (1-P)(35–100A) 100 — 25 — — — 30 — — — — — — — —HED4 (2, 3-P) 100 42 30 (2-P) — — — — — —HHED6 (2, 3-P) — 100 — — 0 65 018 — — — — — — — — —CED6 (2, 3-P) — 200 — — 200 100 — 50 (2-P) 50 (3-P) — — — — — — H W1 W2 HW2, W3Dimensions (in inches)D1 D W3 D1 D6MOLDED CASECIRCUIT BREAKERS■ Built to order. Allow 2–3 weeks for delivery. SWD rated.When wired as shown on page 6-3, this circuit breaker isUL listed and rated for use on 500V DC ungrounded UPSsystems. HED4 and HHED6 type circuit breakers meet the ULcriteria for “current limiting” at 240V AC. ED6-ETI, CED6-ETI, see page 6-66 for orderinginformation. Single Pole 15-30A 30KA @ 347V non-UL.35-100A 18KA @ 347V non-UL. HACR rated.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-35

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersAccessoriesAccessories for:ED 125A FrameCombinationsAvailable only when ordered together.Only one module can be added to abreaker. Additional accessories, whichalways attach to the left pole, cannot beadded to the combination later. Adds 1inch pole space.EquipmentGround SensingA field addable kit containing 30mA or5 mA ground fault accessory module,current transformer with 24 inch leads,and current transformer mountingequipment. Current transformer tomount in gutter of lighting panel orany control panel. Accessory moduleoperates from separate 120V controlpower source.Both 30MA and 5MA devices areequipment protection devices only.Do not use for personnel protection.Shunt Trip CombinationsSelection1 Shunt TripControl 1 Shunt Trip and 1 Auxiliary Switch 1 Shunt Trip and 1 Shunt Trip and 2Voltage 1 Shunt Trip 1 Auxiliary Switch and 1 Alarm Switch 1 Alarm Switch Auxiliary SwitchesAC DC Catalog Number Catalog Number Catalog Number Catalog Number Catalog Number024 S17ED60 — — — —048 S18ED60 — — — —120 S01ED60 S01ED62A S01ED62AB S01ED62B S01ED62AA208 — S02ED62A▲ S02ED62AB▲ S02ED62B▲ S02ED62AA▲240 S03ED60 S03ED62A S03ED62AB S03ED62B▲ S03ED62AA▲277 S15ED60▲ S15ED64A▲ S15ED64AB▲ S15ED64B▲ —480 S04ED60 S04ED64A▲ S04ED64AB▲ S04ED64B▲ —012 S16ED60▲ S16ED62A▲ — — —024 S07ED60 S07ED62A S07ED62AB▲ S07ED62B▲ S07ED62AA▲048 S09ED60▲ S09ED62A▲ S09ED62AB▲ S09ED62B▲ S09ED62AA▲125 S11ED60▲ S11ED62A▲ S11ED62AB▲ S11ED62B▲ S11ED62AA▲250 S13ED60▲ S13ED62A▲ S13ED62AB▲ S13ED62B▲ S13ED62AA▲List Price $: 636.00 897.00 1157.00 897.00 1157.00Undervoltage Trip Combinations1 Undervoltage Trip1 Undervoltage and 1 Auxiliary 1 Undervoltage 1 UndervoltageControl 1 Undervoltage Trip and Switch and Trip and Trip and 2Voltage Trip 1 Auxiliary Switch 1 Alarm Switch 1 Alarm Switch Auxiliary SwitchesAC DC Catalog Number Catalog Number Catalog Number Catalog Number Catalog Number120 U01ED60 U01ED62A U01ED62AB▲ U01ED62B▲ U01ED62AA▲208 U02ED60▲ U02ED62A▲ U02ED62AB▲ U02ED62B▲ U02ED62AA▲240 U03ED60 U03ED62A▲ U03ED62AB▲ U03ED62B▲ U03ED62AA▲277 U16ED60▲ U16ED64A▲ U16ED64AB▲ U16ED64B▲ —480 U06ED60▲ U06ED64A▲ U06ED64AB▲ U06ED64B▲ —600 U08ED60▲ — — — —024 U13ED60 U13ED62A▲ U13ED62AB▲ U13ED62B▲ U13ED62AA▲048 U14ED60▲ U14ED62A▲ U14ED62AB▲ U14ED62B▲ U14ED62AA▲125 U10ED60▲ U10ED62A▲ U10ED62AB▲ U10ED62B▲ U10ED62AA▲250 U12ED60▲ U12ED62A▲ — — U12ED62AA▲List Price $: 636.00 897.00 1157.00 897.00 1157.00Auxiliary Switch CombinationsMaximum 1 Alarm Switch and 1 Alarm Switch andVoltage 1 Auxiliary Switch 1 Auxiliary Switch 2 Auxiliary Switches 2 Auxiliary SwitchesAC DC Catalog Number Catalog Number Catalog Number Catalog Number240 250 A01ED62 A01ED62B A02ED62 A02ED62B480 A01ED64 A01ED64B — —List Price $: 271.00 540.00 540.00 802.00MaximumVoltage1 Auxiliary SwitchAC DC Catalog Number List Price $12 A01EDLV 342.00 Gold Plated Contacts—for PLC useAlarm Switch OnlyMaximumVoltage1 Alarm SwitchAC DC Catalog Number List Price $240 250 B00ED62 271.00480 B00ED64 271.00Ground Fault Sensing Relay Kit — Equipment Protection OnlyFor Use With Number of Catalog Number ListBreaker Frame Poles Description 30mA 5mA Price $CED6, ED2, ED4ED6, EFC, EFF,HED4, HHED6Basic Kit GF01ED60 GF01ED65 1483.00Basic Kit with Normally1, 2, 3 Open Bell AlarmGF01ED60B0 GF01ED65B0▲ 1734.00Basic Kit with NormallyClosed Bell Alarm GF01ED60BC GF01ED65BC▲ 1734.00▲ Built to order. Allow 6–8 weeks for delivery.6-36Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersAccessoriesType FXD6-A Non-Interchangeable Trip (Assembled Circuit Breaker – Without Lugs)Blue LabelContinuous 2-Pole 3-PoleCurrent Rating Catalog List Catalog List@ 40°C Number Price $ Number Price $70 FXD62B070■ 1801.00 FXD63B070 2276.0080 FXD62B080■ 1801.00 FXD63B080 2276.0090 FXD62B090■ 1801.00 FXD63B090 2276.00100 FXD62B100 1801.00 FXD63B100 2276.00110 FXD62B110■ 1801.00 FXD63B110 2276.00125 FXD62B125 1801.00 FXD63B125 2276.00150 FXD62B150 1801.00 FXD63B150 2276.00175 FXD62B175 1801.00 FXD63B175 2276.00200 FXD62B200 1801.00 FXD63B200 2276.00225 FXD62B225 1801.00 FXD63B225 2276.00250 FXD62B250 3062.00 FXD63B250 3572.00Type FD6-A Interchangeable TripBlue LabelComplete BreakerContinuous Unassembled with Lugs Frame Only Trip Unit OnlyCurrent Rating Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $2-Pole 600V AC, 250V DC 70 FD62B070■ 1896.00 FD62T070■ 939.0080 FD62B080■ 1896.00 FD62T080■ 939.0090 FD62B090■ 1896.00 FD62T090■ 939.00100 FD62B100■ 1896.00 FD62T100■ 939.00110 FD62B110■ 1896.00 FD62T110■ 939.00125 FD62B125■ 1896.00 FD62F250 869.00 FD62T125■ 939.00150 FD62B150 1896.00 FD62T150 939.00175 FD62B175■ 1896.00 FD62T175■ 939.00200 FD62B200 1896.00 FD62T200 939.00225 FD62B225■ 1896.00 FD62T225■ 939.00250 FD62B250■ 3158.00 FD62T250■ 2201.003-Pole 600V AC, 500V DC 70 FD63B070■ 2414.00 FD63T070■ 1157.0080 FD63B080■ 2414.00 FD63T080■ 1157.0090 FD63B090■ 2414.00 FD63T090■ 1157.00100 FD63B100 2414.00 FD63T100 1157.00110 FD63B110■ 2414.00 FD63T110■ 1157.00125 FD63B125 2414.00 FD63F250 1125.00 FD63T125 1157.00150 FD63B150 2414.00 FD63T150 1157.00175 FD63B175 2414.00 FD63T175 1157.00200 FD63B200 2414.00 FD63T200 1157.00225 FD63B225 2414.00 FD63T225 1157.00250 FD63B250 3713.00 FD63T250 2456.00Interrupting RatingsRMS Symmetrical Amperes (KA)UL 489 AIR (File E10848) IEC 947-2Volts AC (50/60Hz) Volts DC Volts AC (50/60Hz)Breaker240 480 600 250 500 220/240 380/415 500Type lcu lcs lcu lcs lcu lcsFXD6-A, FD6-A 65 35 22 30 (2-P) 18 (3-P) 65 33 35 9 20 10HFXD6 , HFD6 100 65 25 30 (2-P) 25 (3-P) 100 50 65 33 42 21HHFD6 , HHFXD6 200 100 25 — — 200 100 100 50 65 33CFD6 200 200 100 50 (2-P) 50 (3-P) — — — — — —Instantaneous Adjustment Trip RangeNominal Instantaneous Values+20% +20%Breaker Ampere ToleranceToleranceRating Low 2 3 4 5 6 7 High170-90 600 640 690 730 770 810 850 900100-110 700 770 840 920 990 1060 1140 1200125-150 800 900 1000 1100 1200 1300 1400 1500175-200 900 1060 1210 1370 1520 1780 1930 2000225-250 1100 1300 1500 1700 1900 2100 2300 2500Note: FD frame qualified to UL489 supplement SB “NAVAL”.See page 6-84 for additional information.Ordering InformationSelectionComplete Breaker Unassembledwith LugsPrices of FD6, HFD6, and HHFD6breakers includes frame, trip andboth line and load lugs (TA1FD350A).When ordered by these catalognumbers, the customer will receivethe frame, trip, and lugs separatelypackaged. For applications requiringdifferent lugs, order individual itemsas needed.Complete Breaker Assembled withoutLugsPrices of FXD6, HFXD6, HHFXD6,and CFD6 includes frame withnon-interchangeable trip unitinstalled only. Order required lugsseparately. For line and load lugs(TA1FD350A) installed, add suffix“L” to catalog number (add 2 timeslist price of lugs for each pole).50°C Applications see page 6-84.400 Hz Applications see page 6-84.Lugs For 75°C Wire Catalog Wire ListNumber Range Price $TA1FD350A#6—350 kcmil Cu#4—350 kcmil Al22.00TC1FD350 #6—350 kcmil Cu 34.50Compression LugCCF250 350 kcmil Cu/Al 51.00EnclosuresCatalog ListType Number Price $1 F6N1S(F) 184.003R F6N3R 606.004-4X FD6SS4 4720.007-9 EC2 4815.0012 F6N12 410.00Neutral N250 143.00Modifications page 6-84Enclosures Section 5Accessories pages 6-39 and 6-86 to 6-91■ Built to order. Allow 2–3 weeks for delivery.Type FXD6-A circuit breakers are UL Listed for reversefed applications.2-pole units are 3-pole width. When wired as shown on page 6-3, this circuit breaker isUL listed and rated for use on 500V DC ungroundedUPS systems only. Order neutral as separate item. See Note: A, page 6-81. HFD6 and HHFD6 type circuit breakers meet theUL criteria for “current limiting” at 240 and 480V AC. HACR rated.6MOLDED CASECIRCUIT BREAKERSDiscount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-37

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersFD 250A Frame Sentron SeriesType HFD6, Type HFXD6 Black LabelInterchangeable TripComplete BreakerContinuousUnassembled with Lugs Frame Only Trip Unit OnlyCurrent Rating Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $2-Pole 600V AC, 250V DC (3-Pole Width)070 HFD62B070■ 4156.00 FD62T070■ 939.00080 HFD62B080■ 4156.00 FD62T080■ 939.00090 HFD62B090■ 4156.00 FD62T090■ 939.00100 HFD62B100■ 4156.00 FD62T100■ 939.00110 HFD62B110■ 4156.00 FD62T110■ 939.00125 HFD62B125■ 4156.00 HFD62F250 3129.00 FD62T125■ 939.00150 HFD62B150■ 4156.00 FD62T150■ 939.00175 HFD62B175■ 4156.00 FD62T175■ 939.00200 HFD62B200■ 4156.00 FD62T200■ 939.00225 HFD62B225■ 4156.00 FD62T225■ 939.00250 HFD62B250■ 5418.00 FD62T250■ 2201.003-Pole 600V AC, 500V DC 070 HFD63B070■ 5053.00 FD63T070■ 1157.00080 HFD63B080■ 5053.00 FD63T080■ 1157.00090 HFD63B090■ 5053.00 FD63T090■ 1157.00100 HFD63B100 5053.00 FD63T100 1157.00110 HFD63B110■ 5053.00 FD63T110■ 1157.00125 HFD63B125 5053.00 HFD63F250 3764.00 FD63T125 1157.00150 HFD63B150 5053.00 FD63T150 1157.00175 HFD63B175 5053.00 FD63T175 1157.00200 HFD63B200 5053.00 FD63T200 1157.00225 HFD63B225 5053.00 FD63T225 1157.00250 HFD63B250 6352.00 FD63T250 2456.00Type HHFD, HHFXD6 3-Pole 600V AC, Extra High Interrupting070 HHFD63B070■ 5866.00 FD63T070■ 1157.00080 HHFD63B080■ 5866.00 FD63T080■ 1157.00090 HHFD63B090■ 5866.00 FD63T090■ 1157.00100 HHFD63B100 5866.00 FD63T100 1157.00110 HHFD63B110■ 5866.00 FD63T110■ 1157.00125 HHFD63B125 5866.00 HHFD63F250 4577.00 FD63T125 1157.00150 HHFD63B150 5866.00 FD63T150 1157.00175 HHFD63B175 5866.00 FD63T175 1157.00200 HHFD63B200 5866.00 FD63T200 1157.00225 HHFD63B225 5866.00 FD63T225 1157.00250 HHFD63B250 7165.00 FD63T250 2456.00Type CFD6 Fuseless Current LimitingNon-Interchangeable Trip (Assembled Circuit Breaker Without Lugs)3-PoleRed LabelContinuous600V AC/500V DCCurrent Rating Catalog List@ 40°C Number Price $070 CFD63B070■ 6346.00080 CFD63B080■ 6346.00090 CFD63B090■ 6346.00100 CFD63B100■ 6346.00110 CFD63B110■ 6346.00125 CFD63B125■ 6346.00150 CFD63B150 6346.00175 CFD63B175 6346.00200 CFD63B200 6346.00225 CFD63B225 6346.00250 CFD63B250 7052.00 D1 W Selection/DimensionsDL W Figure 1 Figure 2Dimensions (in inches)BreakerD1Type W L D (tohandle)Figure 1FXD6-A, FD6-A,HFD6, HFXD6, 4.50 09.50 4 5.25HHFD6, FD6-ETI Figure 2CFD6,CFD6-ETI 4.50 14.25 4 5.25Shipping WeightsNumber of Number per ShippingPoles Carton Weight (lbs.)FD6-A, HFD6, HHFD6, FXD6-AAssembled Circuit Breaker (less connectors)2 1 08.63 1 10FD6-A, HFD6, HHFD6 Frame Only2 1 07.53 1 08.7FD6 Trip Unit Only2 1 01.13 1 01.3CFD6 Assembled Circuit Breaker (less terminals)2 1 313 1 34DL ■ Built to order. Allow 2–3 weeks for delivery. When wired as shown on page 6-3, this circuit breakeris UL listed and rated for use on 500V DC ungroundedUPS systems. For non-interchangeable trip 3-pole HFD6 type circuitbreaker, change prefix identifier from HFD6 to HFXD6.Price equals frame and trip prices combined, e.g. priceof HFXD63B250 equals price of HFD63F250 plus price ofFD63T250. Order lugs separately. Type HFXD6, HHFXD6, CFD6 are UL Listed for reversefeed applications. Type HFXD6, HFD6, HHFD6, HHFXD6 meet the ULcriteria for “Current Limiting” at 240 VAC and 480V AC. FXD6, ETI, CFD6, ETI — See page 6-66 forordering information. HACR rated.6-38Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersInternal AccessoriesAccessories:for FD, FFC & FFF 250A FramesShunt Trip CombinationsControl Voltage1 Shunt TripAC DC Catalog Number List Price $024 S17FD60 636.00120 S01FD60 636.00240 S03FD60 636.00277 S15FD60▲ 636.00480 S04FD60 636.00600 S06FD60▲ 636.00012 S16FD60▲ 636.00024 S07FD60 636.00048 S09FD60▲ 636.00125 S11FD60 636.00250 S13FD60▲ 636.00SelectionUndervoltage Trip Combinations1 Undervoltage Trip andControl Voltage 1 Undervoltage Trip 1 Auxiliary Switch AC DC Catalog Number List Price $ Catalog Number List Price $120 U01FD60 636.00 W01FD64 897.00208 U02FD60▲ 636.00 W02FD64▲ 897.00240 U03FD60 636.00 W03FD64▲ 897.00277 U16FD60▲ 636.00 W16FD64▲ 897.00480 U06FD60▲ 636.00 W06FD64▲ 897.00600 U08FD60▲ 636.00 — —024 U13FD60 636.00 W13FD64 897.00048 U14FD60▲ 636.00 W14FD64▲ 897.00125 U10FD60▲ 636.00 W10FD64▲ 897.00250 U12FD60▲ 636.00 W12FD64▲ 897.00Auxiliary Switch Combinations1 Auxiliary Switch 2 Auxiliary SwitchesVoltageListListAC DC Catalog Number Price $ Catalog Number Price $240 A01FD62 271.00 A02FD62 540.00480 A01FD64 271.00 A02FD64 540.0012 A01FDLV 342.00 Gold Plated Contacts - for PLC useAlarm Switch CombinationsMaximum1 Alarm Switch andVoltage 1 Alarm Switch 1 Auxiliary SwitchAC DC Catalog Number List Price $ Catalog Number List Price $480 250 B00FD64 271.00 C01FD64 540.006MOLDED CASECIRCUIT BREAKERS▲ Built to order. Allow 6–8 weeks for delivery. Auxiliary switch application is for 480V AC maximum.Note: Old F-frame accessories cannot be used in newSentron line. Likewise, new FD-frame accessoriescannot be used on old F-frame circuit breakers.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-39

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersJD 400A Frame Sentron SeriesType JXD2-A 240V AC, 2-Pole 250V DC OnlyBlue LabelNon-Interchangeable Trip (Assembled Circuit Breaker without Lugs)Continuous 2-Pole (3-Pole Width) 3-PoleCurrent Rating Catalog List Catalog List@ 40°C Number Price $ Number Price $200 JXD22B200■ 2546.00 JXD23B200 3094.00225 JXD22B225■ 2546.00 JXD23B225 3094.00250 JXD22B250■ 2546.00 JXD23B250 3094.00300 JXD22B300 2546.00 JXD23B300 3094.00350 JXD22B350■ 2546.00 JXD23B350 3094.00400 JXD22B400 2546.00 JXD23B400 3094.00Type JXD6-A 600V AC, 2-Pole 250V DC, 3-Pole 500V DC Blue LabelNon-Interchangeable Trip (Assembled Circuit Breaker without Lugs)200 JXD62B200■ 3184.00 JXD63B200 3764.00225 JXD62B225■ 3184.00 JXD63B225 3764.00250 JXD62B250■ 3184.00 JXD63B250 3764.00300 JXD62B300 3184.00 JXD63B300 3764.00350 JXD62B350■ 3184.00 JXD63B350 3764.00400 JXD62B400 3184.00 JXD63B400 3764.00Type JD6-A Blue LabelInterchangeable TripComplete BreakerContinuous Unassembled with Lugs Frame Only Trip Unit OnlyCurrent Rating Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $2-Pole 600V AC, 250V DC (3-Pole Width)200 JD62B200■ 3309.00 JD62T200■ 1859.00225 JD62B225■ 3309.00 JD62T225■ 1859.00250 JD62B250■ 3309.00JD62F400 1324.00JD62T250■ 1859.00300 JD62B300■ 3309.00 JD62T300■ 1859.00350 JD62B350■ 3309.00 JD62T350■ 1859.00400 JD62B400 3309.00 JD62T400 1859.003-Pole 600V AC, 500V DC 200 JD63B200 3953.00 JD63T200 2070.00225 JD63B225 3953.00 JD63T225 2070.00250 JD63B250 3953.00JD63T250 2070.00300 JD63B300 3953.00JD63F400 1694.00JD63T300 2070.00350 JD63B350 3953.00 JD63T350 2070.00400 JD63B400 3953.00 JD63T400 2070.00Interrupting RatingsRMS Symmetrical Amperes (KA)UL 489 AIR (File E10848) IEC 947-2Volts AC Volts DC Volts AC (50/60Hz)Breaker(50/60Hz) 220/240 380/415 500Type 240 480 600 250 500 lcu lcs lcu lcs lcu lcsJXD2-A 065 — — 30 (2-P) — — — — — — —JXD6-A, JD6-A 065 035 025 30 (2-P) 25 (3-P) 065 033 040 20 30 15HJD6-A, HJXD6-A 100 065 035 30 (2-P) 35 (3-P) 100 050 065 33 42 21HHJD6, HHJXD6 200 100 050 — — 200 100 100 50 65 33CJD6-A 200 150 100 50 (2-P) 50 (3-P) — — — — — —Instantaneous Adjustment Trip RangeNominal Instantaneous Values+20% +20%Breaker Ampere Tolerance ToleranceRating Low 2 3 4 5 6 7 High200-300 1250 1430 1610 1790 1960 2140 2320 2500350-400 2000 2290 2570 2860 3140 3430 3710 4000Ordering InformationSelectionComplete Breaker Unassembledwith LugsPrices of JD6, HJD6, and HHJD6breakers include frame, trip andboth line and load lugs (TA2J6500).When ordered by these catalognumbers, the customer will receivethe frame, trip, and lugs separatelypackaged. For applicationsrequiring different lugs, orderindividual items as needed.Complete Breaker Assembled withoutLugsPrices of JXD6, HJXD6, HHJXD6,and CJD6 include frame withnon-interchangeable trip unitinstalled only. Order required lugsseparately. For line and load lugs(TA2J6500) installed, add suffix “L”to catalog number (add 2 times listprice of lugs for each pole).100% RatedTypes JXD6 and HJXD6 breakersare available with 100% ratings.To order add suffix “H” to catalognumber, and 10% to list price.■100% rated JD breakers require theuse of 90°C Cu cable sized at 75°Campacity and lugs TC1J6600or TC2J6500.50°C Applications see page 6-84.400Hz Applications see page 6-84.Lugs For 75°C Wire CablesCatalog per Wire ListNumber Lug Range Price $TA2J6500 1, 2 #3/0-500 kcmil Cu 31.502 #4/0-500 kcmil AlTA1L6750 1 500-750 kcmil Al 76.001 500-600 kcmil CuTC1J6600 1 #3/0-600 kcmil Cu 77.00TC2J6500 1, 2 #3/0-500 kcmil Cu 76.00Compression LugCCL600 1 500 kcmil Cu/Al 150.00■ Built to order. Allow 2–3 weeks for delivery.Type JXD2 and JXD6 circuit breakers are UL Listed forreverse feed applications.When wired as shown on page 6-3, this circuit breaker isUL listed and rated for use on 500V DC ungrounded UPSsystems only.See Note: A, page 6-81.HHJD6 type circuit breakers meet the UL criteria for“current limiting” at 240 and 480V AC. HACR rated.Note: JD frame qualified to UL489 supplement B“NAVAL.” See page 6-84 for additional information.Modifications page 6-84Enclosures Section 5Accessories pages 6-43 and 6-86 to 6-916-40Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersJD 400A Frame Sentron SeriesType HJD6-A, HJXD6-A Black LabelInterchangeable TripComplete BreakerContinuousUnassembled with Lugs Frame Only Trip Unit OnlyCurrent Rating Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $2-Pole 600V AC, 250V DC (3-Pole Width)200 HJD62B200■ 5426.00 JD62T200■ 1859.00225 HJD62B225■ 5426.00 JD62T225■ 1859.00250 HJD62B250■ 5426.00JD62T250■ 1859.00HJD62F400■ 3441.00300 HJD62B300■ 5426.00 JD62T300■ 1859.00350 HJD62B350■ 5426.00 JD62T350■ 1859.00400 HJD62B400■ 5426.00 JD62T400 1859.003-Pole 600V AC, 500V DC 200 HJD63B200 6538.00 JD63T200 2070.00225 HJD63B225 6538.00 JD63T225 2070.00250 HJD63B250 6538.00JD63T250 2070.00HJD63F400 4279.00300 HJD63B300 6538.00 JD63T300 2070.00350 HJD63B350 6538.00 JD63T350 2070.00400 HJD63B400 6538.00 JD63T400 2070.00Type HHJD6, HHJXD6 2-Pole 600V AC (3-Pole Width)Black Label200 HHJD62B200■ 6523.00 JD62T200■ 1859.00225 HHJD62B225■ 6523.00 JD62T225■ 1859.00250 HHJD62B250■ 6523.00JD62T250■ 1859.00HHJD62F400■ 4538.00300 HHJD62B300■ 6523.00 JD62T300■ 1859.00350 HHJD62B350■ 6523.00 JD62T350■ 1859.00400 HHJD62B400■ 6523.00 JD62T400 1859.003-Pole 600VAC200 HHJD63B200 7841.00 JD63T200 2070.00225 HHJD63B225 7841.00 JD63T225 2070.00250 HHJD63B250 7841.00JD63T250 2070.00HHJD63F400 5582.00300 HHJD63B300 7841.00 JD63T300 2070.00350 HHJD63B350 7841.00 JD63T350 2070.00400 HHJD63B400 7841.00 JD63T400 2070.00Type CJD6-A Fuseless Current LimitingNon-Interchangeable Trip (Assembled Circuit Breakers Without Lugs)2-Pole3-PoleRed LabelContinuous600V AC/250V DC 600V AC/500V DCCurrent Rating Catalog List@ 40°C Number Price $200 CJD63B200■ 8167.00225 CJD63B225■ 8167.00250 For 2-pole application CJD63B250■ 8167.00300 use outside poles of CJD63B300■ 8167.00350 3-pole circuit breaker CJD63B350■ 8167.00400 CJD63B400 8167.00 D1 W Selection/DimensionsDL Dimensions (in inches)ToBreakerHandleType W L D D1Figure 1JXD2-A, JXD6-A, JD6-AHJD6-A, HJXD6-A, HHJD6, 7.5 11 4 5.44HJD6, HJXD6, HHJXD6,JXD6-ETI, SJD6, SHJD6Figure 2CJD6, CJD6-ETI, SCJD67.5 17.86 4 5.44Enclosures (Except SCJD6)Catalog ListType Number Price $1 J6N1 258.003R J6N3R 1393.0012 J6N12 725.004X LD6SS4 6946.007, 9 (200-250A) EC4 4815.007, 9 (300-400A) EE 6662.00Neutral W60992 492.00Shipping Weights W Figure 1 Figure 2Number of Number per ShippingPoles Carton Weight (lbs.)JXD2, JXD6, JD6, HJD6, HHJD6Assembled Breaker (less terminals)2 1 17.53 1 19.5JD6, HJD6, HHJD6 Frame Only2 1 143 1 15.5JD6 Trip Unit Only2 1 03.53 1 04CJD6 Complete Assembled Breaker(less terminals)2 1 29.53 1 31.5DL 6MOLDED CASECIRCUIT BREAKERSFor inches / millimeters conversion, see Application Data section.■ Built to order. Allow 2–3 weeks for delivery.2-pole units available in 3-pole construction. When wired as shown on page 6-3, this circuit breaker isUL listed and rated for use on 500V DC ungroundedUPS systems only. For non-interchangeable 3-pole HJD6 or HHJD6 typecircuit breaker change the prefix identifier to HJXD6or HHJXD6. Price equals price of frame plus price oftrip, e.g. price of HJXD63B400 equals price ofHJD63F400 plus price of JD63T400. Order lugsseparately. JXD6-ETI, CJD6-ETI see page 6-66 for ordering information. Type HJXD6, HHJXD6 Circuit Breakers are UL listed forreverse fed applications. CE applies to non-interchangeable type HJXD6-A only. HACR rated.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-41

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersSJD 400A Frame Digital Solid State Sentron Sensitrip III SeriesType SJD6-ABlue Label3-Pole, 600V ACMaxCatalog Current ListNumber Rating Price $SJD69200■ 200 4564.00SJD69300■ 300 4564.00SJD69400■ 400 4564.00SJD69200G■ 200 7302.00SJD69300G■ 300 7302.00SJD69400G■ 400 7302.00SJD69200NT■ 200 6200.00SJD69300NT■ 300 6200.00SJD69400NT■ 400 6200.00SJD69200NGT■ 200 9164.00SJD69300NGT■ 300 9164.00SJD69400NGT■ 400 9164.00Type SJD6-ABlue Label3-Pole, 600V ACMaxCatalog Current ListNumber Rating Price $SJD69200H■ 200 5007.00SJD69300H■ 300 5007.00SJD69400H■ 400 5007.00SJD69200GH■ 200 8048.00SJD69300GH■ 300 8048.00SJD69400GH■ 400 8048.00SJD69200NTH■ 200 6819.00SJD69300NTH■ 300 6819.00SJD69400NTH■ 400 6819.00SJD69200NGTH■ 200 10071.00SJD69300NGTH■ 300 10071.00SJD69400NGTH■ 400 10071.00Type SHJD6-ABlack Label3-Pole, 600V ACMaxCatalog Current ListNumber Rating Price $SHJD69200■ 200 6500.00SHJD69300■ 300 6500.00SHJD69400■ 400 6500.00SHJD69200G■ 200 9164.00SHJD69300G■ 300 9164.00SHJD69400G■ 400 9164.00SHJD69200NT■ 200 8048.00SHJD69300NT■ 300 8048.00SHJD69400NT■ 400 8048.00SHJD69200NGT■ 200 11116.00SHJD69300NGT■ 300 11116.00SHJD69400NGT■ 400 11116.00SJD 400A Frame – 100% Rated Type SHJD6-ABlack LabelTrip Unit Adjustable Functions3-Pole, 600V ACMaxCatalogCurrent ListNumber Rating Price $SHJD69200H■ 200 7159.00SHJD69300H■ 300 7159.00SHJD69400H■ 400 7159.00SHJD69200GH■ 200 10088.00SHJD69300GH■ 300 10088.00SHJD69400GH■ 400 10088.00SHJD69200NTH■ 200 8827.00SHJD69300NTH■ 300 8827.00SHJD69400NTH■ 400 8827.00SHJD69200NGTH■ 200 12238.00SHJD69300NGTH■ 300 12238.00SHJD69400NGTH■ 400 12238.00Current LimitingType SCJD6-ARed Label3-Pole, 600V ACMaxCatalog Current ListNumber Rating Price $SCJD69200■ 200 8649.00SCJD69300■ 300 8649.00SCJD69400■ 400 8649.00SCJD69200G■ 200 11739.00SCJD69300G■ 300 11739.00SCJD69400G■ 400 11739.00SCJD69200NT■ 200 10389.00SCJD69300NT■ 300 10389.00SCJD69400NT■ 400 10389.00SCJD69200NGT■ 200 14334.00SCJD69300NGT■ 300 14334.00SCJD69400NGT■ 400 14334.00ShortSuffix Cont Long Instan- Short Short Time Ground GroundLetter Trip Current Time taneous Time Time l 2 t Fault FaultCode Type Setting Delay Setting Pick Up Delay Pick Up Pick Up DelayNone LI G LIG NT LSI NGT LSIG Interrupting RatingsBreakerRMS Symmetrical kA UL 489 (File E10848)Type 240V AC 480V AC 600V ACSJD6-A 065 035 025SHJD6-A 100 065 035SCJD6-A 200 150 100Ordering InformationSelectionPricing information for all DigitalSentron Series SJD frames is forcomplete breaker only – pricerequired lugs as separate items –lugs are suitable for 75° C wire.SJD6 and SCJD6 are acceptable forreverse connection application.SHJD6 are not acceptable forreverse connection application.Shipping WeightsBreaker Number per ShippingType Carton Weight (lbs)SJD6-A 1 20SHJD6-A 1 20SCJD6-A 1 33Lugs for 75° C Wire No ofCablesCatalog per Con- Wire ListNumber nector Range Price $TA2J650022#3/0-500 kcmil Cu#4/0-500 kcmil Cu31.5031.50TA1L675011500–750 kcmil Cu/Al500–600 kcmil Cu76.0076.00TC1J6600 1 #3/0-600 kcmil Cu 77.00TC2J6500 2 #3/0-500 kcmil Cu 76.00TA2J630 2 #4–#3/0-Cu/Al 32.50Compression LugCCL600 (1 pc.) #1/0-500 kcmil Cu/Al 150.00Neutral TransformersAmpere Catalog ListRating Number Price $200 N02SJD 396.00300 N03SJD 396.00400 N04SJD 396.00Note: “G” suffix in catalog number denotes circuitbreaker for 3-phase, 3-wire systems.For 3-phase, 4-wire, order correct 4th wire (neutral)transformer as separate and additional item.■ Built to order. Allow 2–3 weeks for delivery.For additional information, see Note: A, page 6-81.Refer to the NEC for proper app lication of 100%rated devices.Enclosures Section 5Accessories pages 6-43 and 6-86 to 6-916-42Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersInternal AccessoriesAccessories for:JD 400A FrameLD 600A FrameLMD 800A FrameSJD 400A FrameSLD 600A FrameShunt Trip CombinationsSelection1 Shunt Trip andControl Voltage 1 Shunt Trip 1 Auxiliary SwitchAC DC Catalog Number List Price $ Catalog Number List Price $024 S17JLD6 636.00 — —--048 S18JLD6▲ 636.00 — —--120 S01JLD6 636.00 S01JLD62A 897.00240 S03JLD6 636.00 S03JLD62A 897.00277 S15JLD6▲ 636.00 S15JLD64A▲ 897.00480 S04JLD6 636.00 — —--012 S16JLD6▲ 636.00 S16JLD62A▲ 897.00024 S07JLD6 636.00 S07JLD62A 897.00048 S09JLD6▲ 636.00 S09JLD62A 897.00125 S11JLD6 636.00 S11JLD62A▲ 897.00250 S13JLD6▲ 636.00 S13JLD62A▲ 897.00Sensitrip AmmeterUndervoltage Trip CombinationsControl 1 Undervoltage Trip and 1 Undervoltage Trip andVoltage 1 Undervoltage Trip 1 Auxiliary Switch 2 Auxiliary SwitchesAC DC Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $120 U01JLD6 636.00 U01JLD62A 897.00 U01JLD62AA 1157.00208 U02JLD6▲ 636.00 U02JLD62A▲ 897.00 U02JLD62AA▲ 1157.00240 U03JLD6 636.00 U03JLD62A▲ 897.00 U03JLD62AA▲ 1157.00480 U06JLD6 636.00 U06JLD64A▲ 897.00 U06JLD64AA▲ 1157.00024 U13JLD6 636.00 U13JLD62A 897.00 U13JLD62AA 1157.00048 U14JLD6▲ 636.00 U14JLD62A▲ 897.00 U14JLD62AA▲ 1157.00125 U10JLD6▲ 636.00 U10JLD62A▲ 897.00 U10JLD62AA▲ 1157.00250 U12JLD6▲ 636.00 U12JLD62A▲ 897.00 U12JLD62AA▲ 1157.00The Ammeter Display Units plug intothe Sensitrip Trip Unit and displaysthe phase current flowing in thebreaker. They are powered by thebreaker’s CT’s with replaceablebattery back-up for maintaining tripand max logs.The SADU reads currents, currentimbalance, current demand, and tripstatus.Ammeter Mounting KitThe Ammeter may also be panel ordoor mounted using the SADURMK18remote mounting kit.Auxiliary Switch CombinationsMaximum Voltage 1 Form C 2 Form CAC DC Catalog Number List Price $ Catalog Number List Price $480 250 A01JLD64 271.00 A02JLD64 540.00— 12 A01JLDLV 342.00 A02JLDLV 684.00Alarm Switch CombinationsMaximum 1 Alarm Switch and 1 Alarm Switch andVoltage 1 Alarm Switch 1 Auxiliary Switch 2 Auxiliary SwitchesCatalog List Catalog List Catalog ListAC DC Number Price $ Number Price $ Number Price $480 250 B01JLD64 271.00 A01JLD64B 540.00 A02JLD64B 802.00Plug-in Ammeter Display UnitsBreaker Type Description Catalog Number List Price $SJD, SLDDisplay Unit SADU 1776.00Remote Mounting Kit SADURMK18 342.006MOLDED CASECIRCUIT BREAKERSNote: Accessory modules can only be added to rightside pole of solid state SJD and SLD frame circuitbreakers. No accessories can be added ifmechanical interlock is used. All accessories on thispage are useable on superseded JD2, JJ6, JL6, HJ6,SJL, LJ6, LL6, HL6 and SLL circuit breakers.▲ Built to order. Allow 6–8 weeks for delivery.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-43

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersLD 600A Frame Sentron SeriesType LXD6-A Non-Interchangeable Trip (Assembled Circuit Breaker without Lugs)Blue Label2-Pole (3-Pole Width) 3-PoleContinuous 600V AC 250V DC 600V AC 500V DCCurrent Rating Catalog List Catalog List@ 40°C Number Price $ Number Price $450 LXD62B450■ 4893.00 LXD63B450 6102.00500 LXD62B500■ 4893.00 LXD63B500 6102.00600 LXD62B600 4893.00 LXD63B600 6102.00Type LD6-A Interchangeable TripComplete BreakerContinuous Unassembled w/Lugs Frame Only Trip Unit OnlyCurrent Rating Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $2-Pole 600V AC, 250V DC (3-Pole Width)250 LD62B250■ 5020.00 JD62T250■ 1859.00300 LD62B300■ 5020.00 JD62T300■ 1859.00350 LD62B350■ 5020.00 JD62T350■ 1859.00400 LD62B400 5020.00 LD62F600 3035.00 JD62T400 1859.00450 LD62B450■ 5020.00 LD62T450■ 1859.00500 LD62B500■ 5020.00 LD62T500■ 1859.00600 LD62B600 5020.00 LD62T600 1859.003-Pole 600V AC, 500V DC 250 LD63B250 6290.00 JD63T250 2070.00300 LD63B300 6290.00 JD63T300 2070.00350 LD63B350 6290.00 JD63T350 2070.00400 LD63B400 6290.00 LD63F600 4031.00 JD63T400 2070.00450 LD63B450 6290.00 LD63T450 2070.00500 LD63B500 6290.00 LD63T500 2070.00600 LD63B600 6290.00 LD63T600 2070.00Interrupting RatingsRMS Symmetrical Amperes (KA)UL 489 AIR (File E10848) IEC 947-2BreakerVolts AC (50/60Hz) Volts DC Volts AC (50/60Hz)Type 240 480 600 250 500 220/240 380/415 500(lcu) (lcs) (lcu) (lcs) (lcu) (lcs)LD6-A, LXD6-A 065 035 025 30 (2-P) 25 (3-P) 065 033 040 20 30 15HLD6-A, HLXD6-A 100 065 035 30 (2-P) 35 (3-P) 100 050 065 33 42 21HHLD6, HHLXD6 200 100 050 — — 200 100 100 50 65 33CLD6-A 200 150 100 — 50 (3-P) — — — — — —Instantaneous Adjustment Trip RangeBlue LabelNominal Instantaneous Values+20% +20%Breaker Ampere Tolerance ToleranceRating Low 2 3 4 5 6 7 High250-300 1250 1430 1610 1790 1960 2140 2320 2500350-450 2000 2290 2570 2860 3140 3430 3710 4000500-600 3000 3430 3800 4290 4710 5140 5570 6000■ Built to order. Allow 2–3 weeks for delivery.Type LXD6A circuit breakers are UL Listed for reversefed applications. When wired as shown on page 6-3, this circuit breaker isUL listed and rated for use on 500V DC ungroundedUPS systems only. See Note: A, page 6-81. HACR rated.Note: LD frame qualified to UL489 supplement SB “NAVAL”.See page 6-84 for additional information.Modifications page 6-84Enclosures Section 5Accessories pages 6-47 and 6-86 to 6-91Ordering InformationSelectionComplete Breaker Unassembledwith LugsPrices of LD6, HLD6, and HHLD6breakers include frame, trip, andboth line and load lugs (TA2J6500).When ordered by these catalognumbers, the customer will receivethe frame, trip and lugs separatelypackaged. For applications requiringdifferent lugs, order individual itemsas needed.Complete Breaker Assembled withoutLugsPrices of LXD6, HLXD6, HHLXD6,and CLD6 include frame with noninterchangeabletrip unit installedonly. Order required lugs separately.For line and load lugs (TA2J6500)installed, add suffix “L” to catalognumber (add 2 times list price oflugs for each pole).100% RatedTypes LXD6 and HLXD6 breakersare available with 100% ratings.To order add suffix “H” to catalognumber, and 10% to list price. 100%rated LD breakers require the use of90°C Cu cable sized at 75°Campacity and lugs TC1J6600or TC2J6500.50°C Applications see page 6-84.400Hz Applications see page 6-84.Shipping WeightsNumber of Number per ShippingPoles Carton Weight (lbs.)LXD6, LD6, HLD6, HHLD6Assembled Breaker (less terminals)2 1 17.53 1 19.5LD6, HLD6, HHLD6 Frame Only2 1 143 1 15.5LD6, HHLD6 Trip Unit Only2 1 03.53 1 04CLD6 Complete Assembled Breaker(less terminals)2 1 29.53 1 31.5Lugs For 75°C Wire CablesCatalog per Wire ListNumber Lug Range Price $TA2J6500 1, 2 #3/0 500 kcmil Cu 31.502 #4/0 500 kcmil AlTC2J6500 2 #3/0-500 kcmil Cu 76.00TA1L6750 1 500-750 kcmil Al 76.001 500-600 kcmil CuTC1J6600 1 #3/0-600 kcmil Cu 77.00Compression LugCCL600 1 500 kcmil Cu/Al 150.006-44Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersLD 600A Frame Sentron SeriesType HLD6-A, HLXD6-A Black LabelInterchangeable TripComplete BreakerContinuousUnassembled w/Lugs Frame Only Trip Unit OnlyCurrent Rating Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $2-Pole 600V AC, 250V DC (3-Pole Width)250 HLD62B250■ 6563.00 JD62T250■ 1859.00300 HLD62B300■ 6563.00 JD62T300■ 1859.00350 HLD62B350■ 6563.00 JD62T350■ 1859.00400 HLD62B400■ 6563.00 HLD62F600■ 4578.00 JD62T400 1859.00450 HLD62B450■ 6563.00 LD62T450■ 1859.00500 HLD62B500■ 6563.00 LD62T500■ 1859.00600 HLD62B600■ 6563.00 LD62T600 1859.003-Pole 600V AC, 500V DC 250 HLD63B250 8349.00 JD63T250 2070.00300 HLD63B300 8349.00 JD63T300 2070.00350 HLD63B350 8349.00 JD63T350 2070.00400 HLD63B400 8349.00 HLD63F600 6090.00 JD63T400 2070.00450 HLD63B450 8349.00 LD63T450 2070.00500 HLD63B500 8349.00 LD63T500 2070.00600 HLD63B600 8349.00 LD63T600 2070.00Type HHLD6, HHLXD6 Black Label2-Pole 600V AC (3-Pole Width)250 HHLD62B250■ 8184.00 JD62T250■ 1859.00300 HHLD62B300■ 8184.00 JD62T300■ 1859.00350 HHLD62B350■ 8184.00 JD62T350■ 1859.00400 HHLD62B400■ 8184.00 HHLD62F600■ 6199.00 JD62T400 1859.00450 HHLD62B450■ 8184.00 HHLD62T450■ 1859.00500 HHLD62B500■ 8184.00 HHLD62T500■ 1859.00600 HHLD62B600■ 8184.00 HHLD62T600■ 1859.003-Pole 600V AC250 HHLD63B250 9914.00 JD63T250 2070.00300 HHLD63B300 9914.00 JD63T300 2070.00350 HHLD63B350 9914.00 JD63T350 2070.00400 HHLD63B400 9914.00 HHLD63F600 7655.00 JD63T400 2070.00450 HHLD63B450■ 9914.00 HHLD63T450■ 2070.00500 HHLD63B500■ 9914.00 HHLD63T500■ 2070.00600 HHLD63B600■ 9914.00 HHLD63T600■ 2070.00Type CLD6-A Fuseless Current LimitingRed LabelNon-Interchangeable Trip (Assembled Circuit Breaker)2-Pole3-PoleContinuous600V AC/250V DC 600V AC/500V DCCurrent Rating Catalog List@ 40°C Number Price $450 For 2-pole application CLD63B450■ 13045.00500 use outside poles of CLD63B500 13045.00600 3-pole circuit breaker CLD63B600 13045.00Selection/Dimensions D1 W DDimensions (in inches)ToHandleBreakerType W L D D1Figure 1LXD6-A, LD6-AHLD6-AHHLD6, HHLXD6,7.5 11 4 5.44LXD6–ETI, SLD6, SHLD6Figure 2CLD6, 7.5 17.86 4 5.44CLD6-ETI, SCLD6Enclosures: (except SCLD6)L W Figure 1 Figure 2Catalog ListType Number Price $1 LD6N1 449.003R LD6N3R 1618.0012 LD6N12 979.004X LD6SS4 6946.007,9 ED6 11330.00Neutral W60993 436.00DL 6MOLDED CASECIRCUIT BREAKERSFor inches / millimeters conversion, see Application Data section.■ Built to order. Allow 2–3 weeks for delivery. When wired as shown on page 6-3, this circuit breaker isUL listed and rated for use on 500V DC ungroundedUPS systems only. For complete assembled 3-pole HLD6 or HHLD6 typecircuit breaker change the prefix identifier HLD6 orHHLD6 to HLXD6 or HHLXD6. Price is sum of frame andtrip units prices, e.g. price of HLXD63B400 is the price ofHLD63F600 plus the price of LD63T600. Order theterminal connectors separately.■Type HLXD6, HHLXD6, & CLD6 Circuit Breakers are ULListed for reverse feed applications. LXD6-ETI, CLD6-ETI see page 6-66 for ordering information. CE Applies to non-interchangeable type HLXD only. HACR rated.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-45

6Molded Case Circuit BreakersSLD 600A Frame Digital Solid State Sentron Sensitrip III SeriesType SLD6-AType SHLD6-ABlue Label Black Label Red Label3-Pole, 600V ACMax ListCatalog Current PriceNumber Rating $SLD69300■ 300 6235.00SLD69400■ 400 6235.00SLD69500■ 500 6235.00SLD69600■ 600 6235.00SLD69300G■ 300 8847.00SLD69400G■ 400 8847.00SLD69500G■ 500 8847.00SLD69600G■ 600 8847.00SLD69300NT■ 300 7834.00SLD69400NT■ 400 7834.00SLD69500NT■ 500 7834.00SLD69600NT■ 600 7834.00SLD69300NGT■ 300 10890.00SLD69400NGT■ 400 10890.00SLD69500NGT■ 500 10890.00SLD69600NGT■ 600 10890.00Trip Unit Adjustable Functions3-Pole, 600V ACMax ListCatalog Current PriceNumber Rating $SHLD69300■ 300 7593.00SHLD69400■ 400 7593.00SHLD69500■ 500 7593.00SHLD69600■ 600 7593.00SHLD69300G■ 300 10706.00SHLD69400G■ 400 10706.00SHLD69500G■ 500 10706.00SHLD69600G■ 600 10706.00SHLD69300NT■ 300 9401.00SHLD69400NT■ 400 9401.00SHLD69500NT■ 500 9401.00SHLD69600NT■ 600 9401.00SHLD69300NGT■ 300 12989.00SHLD69400NGT■ 400 12989.00SHLD69500NGT■ 500 12989.00SHLD69600NGT■ 600 12989.00Current LimitingType SCLD6-A3-Pole, 600V ACMax ListCatalog Current PriceNumber Rating $SCLD69300■ 300 13446.00SCLD69400■ 400 13446.00SCLD69500■ 500 13446.00SCLD69600■ 600 13446.00SCLD69300G■ 300 17758.00SCLD69400G■ 400 17758.00SCLD69500G■ 500 17758.00SCLD69600G■ 600 17758.00SCLD69300NT■ 300 15914.00SCLD69400NT■ 400 15914.00SCLD69500NT■ 500 15914.00SCLD69600NT■ 600 15914.00SCLD69300NGT■ 300 20940.00SCLD69400NGT■ 400 20940.00SCLD69500NGT■ 500 20940.00SCLD69600NGT■ 600 20940.00ShortSuffix Cont Long Instan- Short Short Time Ground GroundLetter Trip Current Time taneous Time Time l 2 t Fault FaultCode Type Setting Delay Setting Pick Up Delay Pick Up Pick Up DelayNone LI G LIG NT LSI NGT LSIG SelectionOrdering InformationPricing information for all DigitalSentron Series SLD frames is forcomplete breaker only – pricerequired lugs as separate items –lugs are suitable for 75° C wire.SLD6 and SCLD6 are suitable forreverse connection application.SHLD6 are not suitable for reverseconnection application.Shipping WeightsBreaker Number per ShippingType Carton Weight (lbs)SLD6-A 1 20SHLD6-A 1 20SCLD6-A 1 33Neutral TransformersAmpere Catalog ListRating Number Price $300 N03SJD 396.00400 N04SJD 396.00500 N05SLD 396.00600 N06SLD 396.00MOLDED CASECIRCUIT BREAKERSInterrupting RatingsBreakerRMS Symmetrical kA UL 489 (File E10848)Type 240V AC 480V AC 600V ACSLD6-A 065 035 025SHLD6-A 100 065 035SCLD6-A 200 150 100Note: “G” suffix in catalog number denotes circuitbreaker for 3-phase, 3-wire circuits.For 3-phase, 4-wire, order correct 4th wire (neutral)transformer as separate and additional item.For ordering information and terminal connectors seepage 6-44; for enclosures, see page 6-45.100% Rated – Not available in SLD6 Frame.■ Built to order. Allow 2–3 weeks for delivery.6-46Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersInternal AccessoriesAccessories for:JD 400A FrameLD 600A FrameLMD 800A FrameSJD 400A FrameSLD 600A FrameShunt Trip CombinationsSelection1 Shunt Trip andControl Voltage 1 Shunt Trip 1 Auxiliary SwitchAC DC Catalog Number List Price $ Catalog Number List Price $024 S17JLD6 636.00 — —--048 S18JLD6▲ 636.00 — —--120 S01JLD6 636.00 S01JLD62A 897.00240 S03JLD6 636.00 S03JLD62A 897.00277 S15JLD6▲ 636.00 S15JLD64A▲ 897.00480 S04JLD6 636.00 — —--012 S16JLD6▲ 636.00 S16JLD62A▲ 897.00024 S07JLD6 636.00 S07JLD62A 897.00048 S09JLD6▲ 636.00 S09JLD62A 897.00125 S11JLD6 636.00 S11JLD62A▲ 897.00250 S13JLD6▲ 636.00 S13JLD62A▲ 897.00Sensitrip AmmeterUndervoltage Trip CombinationsControl 1 Undervoltage Trip and 1 Undervoltage Trip andVoltage 1 Undervoltage Trip 1 Auxiliary Switch 2 Auxiliary SwitchesAC DC Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $120 U01JLD6 636.00 U01JLD62A 897.00 U01JLD62AA 1157.00208 U02JLD6▲ 636.00 U02JLD62A▲ 897.00 U02JLD62AA▲ 1157.00240 U03JLD6 636.00 U03JLD62A▲ 897.00 U03JLD62AA▲ 1157.00480 U06JLD6 636.00 U06JLD64A▲ 897.00 U06JLD64AA▲ 1157.00024 U13JLD6 636.00 U13JLD62A 897.00 U13JLD62AA 1157.00048 U14JLD6▲ 636.00 U14JLD62A▲ 897.00 U14JLD62AA▲ 1157.00125 U10JLD6▲ 636.00 U10JLD62A▲ 897.00 U10JLD62AA▲ 1157.00250 U12JLD6▲ 636.00 U12JLD62A▲ 897.00 U12JLD62AA▲ 1157.00The Ammeter Display Units plug intothe Sensitrip Trip Unit and displaysthe phase current flowing in thebreaker. They are powered by thebreaker’s CT’s with replaceablebattery back-up for maintaining tripand max logs.The SADU reads currents, currentimbalance, current demand, and tripstatus.Ammeter Mounting KitThe Ammeter may also be panel ordoor mounted using the SADURMK18remote mounting kit.Auxiliary Switch CombinationsMaximum Voltage 1 Form C 2 Form CAC DC Catalog Number List Price $ Catalog Number List Price $480 250 A01JLD64 271.00 A02JLD64 540.00— 12 A01JLDLV 342.00 A02JLDLV 684.00Alarm Switch CombinationsMaximum 1 Alarm Switch and 1 Alarm Switch andVoltage 1 Alarm Switch 1 Auxiliary Switch 2 Auxiliary SwitchesCatalog List Catalog List Catalog ListAC DC Number Price $ Number Price $ Number Price $480 250 B01JLD64 271.00 A01JLD64B 540.00 A02JLD64B 802.00Plug-in Ammeter Display UnitsBreaker Type Description Catalog Number List Price $SJD, SLDDisplay Unit SADU 1776.00Remote Mounting Kit SADURMK18 342.006MOLDED CASECIRCUIT BREAKERSNote: Accessory modules can only be added to rightside pole of solid state SJD and SLD frame circuitbreakers. No accessories can be added ifmechanical interlock is used. All accessories on thispage are useable on superseded JD2, JJ6, JL6, HJ6,SJL, LJ6, LL6, HL6 and SLL circuit breakers.▲ Built to order. Allow 6–8 weeks for delivery.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-47

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersLMD 800A Frame Sentron SeriesType LMXD6 Non-Interchangeable Trip (Assembled Circuit Breaker without Lugs)Continuous 2-Pole (3-Pole Width) 3-PoleCurrent Rating Catalog List Catalog List@ 40°C Number Price $ Number Price $500 — — LMXD63B500■ 7902.00600 LMXD62B600■ 6242.00 LMXD63B600 7902.00700 LMXD62B700■ 6242.00 LMXD63B700 7902.00800 LMXD62B800 6242.00 LMXD63B800 7902.00Type LMD6 Interchangeable TripBlue LabelComplete BreakerContinuous Unassembled w/Lugs Frame Only Trip Unit OnlyCurrent Rating Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $2-Pole 600V AC, 250V DC (3-Pole Width)500 LMD62B500■ 6632.00 LMD62T500■ 2987.00600 LMD62B600■ 6632.00 LMD62F800■ 3253.00 LMD62T600■ 2987.00700 LMD62B700■ 6632.00 LMD62T700■ 2987.00800 LMD62B800■ 6632.00 LMD62T800■ 2987.003-Pole 600V AC, 500V DC 500 LMD63B500■ 8491.00 LMD63T500■ 3747.00600 LMD63B600■ 8491.00 LMD63F800 4156.00 LMD63T600■ 3747.00700 LMD63B700■ 8491.00 LMD63T700■ 3747.00800 LMD63B800 8491.00 LMD63T800 3747.00Instantaneous Adjustment Trip RangeBlue LabelNominal Instantaneous ValuesAmpere Rating Low +/- 20% 2 3 4 5 6 7 High +/- 20%ToleranceTolerance500-600 3000 3430 3860 4290 4710 5140 5570 6000700-800 3200 3500 3700 4200 4700 6400 7300 8000Ordering InformationShipping WeightsSelectionComplete Breaker Unassembledwith LugsPrices of LMD6 and HLMD6 breakersinclude frame, trip, and both lineand load lugs (TA3K500). Thesecatalog numbers include the frame,trip and lugs separately packaged.For applications requiring differentlugs, order individual items asneeded.Complete Breaker Assembledwithout LugsPrices of LMXD6 and HLMXD6include frame withnon-interchangeable trip unitinstalled only. Order required lugsseparately. For line and load lugs(TA3K500) installed, add suffix “L”to catalog number (add 2 times listprice of lugs for each pole).50°C Applications see page 6-84.400Hz Applications see page 6-84.Number of Number per ShippingPoles Carton Weight (lbs.)LMD6, HLMD6, LMXD6, HLMXD6Complete Breaker (less terminals)2 1 533 1 61.5LMD6, HLMD6 Frame Only2 1 42.253 1 46LMD6, HLMD6 Trip Unit Only2 1 4.53 1 6.5Lugs for 75°C WireCablesCatalog per Wire ListNumber Lug Range Price $TA2K500 1, 2 #1-500 kcmil Cu/Al 71.00TA3K500 1-3 #1/0-500 kcmil Cu/Al 98.00TA2N750 1, 2 500-750 kcmil Cu/Al 101.00■ Built to order. Allow 2–3 weeks for delivery. LMXD6 circuit breakers are UL Listed for reverseconnected applications. When wired as shown on page 6-3, this circuit breaker isUL listed and rated for use on 500VDC ungrounded UPSsystems only. See Note: A, page 6-81. HACR rated.Modifications page 6-84Enclosures Section 5Accessories pages 6-50 and 6-81 to 6-916-48Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersLMD 800A Frame Sentron SeriesType HLMXD6 Non-Interchangeable Trip (Assembled Circuit Breaker Without Lugs)2-Pole3-PoleBlack LabelContinuous600V AC/250V DC600V AC/500V DCCurrent Rating Catalog List@ 40°C Number Price $500 For 2-pole application use HLMXD63B500■ 9564.00600 outside poles of 3-poleHLMXD63B600■ 9564.00700 circuit breakerHLMXD63B700■ 9564.00800 HLMXD63B800 9564.00Selection/DimensionsType HLMD6 Interchangeable TripBlack LabelComplete BreakerContinuousUnassembled Frame Only Trip Unit OnlyCurrent Rating Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $2-Pole 600V AC, 250V DC (3-Pole Width)500 HLMD62B500■ 7905.00 LMD62T500■ 2987.00600 HLMD62B600■ 7905.00 HLMD62F800■ 4526.00LMD62T600■ 2987.00700 HLMD62B700■ 7905.00 LMD62T700■ 2987.00800 HLMD62B800■ 7905.00 LMD62T800■ 2987.003-Pole 600V AC, 500V DC 500 HLMD63B500 10154.00 LMD63T500■ 3747.00600 HLMD63B600 10154.00 HLMD63F800 5819.00LMD63T600■ 3747.00700 HLMD63B700 10154.00 LMD63T700■ 3747.00800 HLMD63B800 10154.00 LMD63T800 3747.00Interrupting RatingsUL 489A IR IEC 947-2RMS Symmetrical Amperes (KA)Volts AC (50/60HZ)BreakerVolts AC Volts DC 220/240 380/415 500Type 240 480 600 250 500 (lcu) (lcs) (lcu) (lcs) (lcu) (lcs)LMD6, LMXD6 65 50 25 30 (2-P) 25 (3-P) 065 033 040 20 30 15HLMD6, HLMXD6 100 065 050 30 (2-P) 50 (3-P) 100 050 065 33 42 21WD1DDimensions (in inches)BreakerType W L D D1LMD6,LMXD6,HLMD6, 7.5 16 4.5 5.93HLMXD6LMXD6-ETI EnclosuresCatalog ListType Number Price $1 LMD1 897.003R LMD3R 2202.0012 LMD12■ 2883.00Neutral W63623 606.00L6MOLDED CASECIRCUIT BREAKERSFor inches / millimeters conversion, see Application Data section.■ Built to order. Allow 2–3 weeks for delivery.HLMXD6 circuit breakers are UL Listed for reverseconnection applications. LMXD6-ETI, see page 6-66 for catalog information. When wired as shown on page 6-3, this circuit breakeris UL listed and rated for use on 500VDC ungroundedUPS systems only. HACR rated.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-49

Molded Case Circuit BreakersInternal AccessoriesAccessories for:JD 400A FrameLD 600A FrameLMD 800A FrameSJD 400A FrameSLD 600A FrameShunt Trip CombinationsSelection1 Shunt Trip andControl Voltage 1 Shunt Trip 1 Auxiliary SwitchAC DC Catalog Number List Price $ Catalog Number List Price $024 S17JLD6 636.00 — —--048 S18JLD6▲ 636.00 — —--120 S01JLD6 636.00 S01JLD62A 897.00240 S03JLD6 636.00 S03JLD62A 897.00277 S15JLD6▲ 636.00 S15JLD64A▲ 897.00480 S04JLD6 636.00 — —--012 S16JLD6▲ 636.00 S16JLD62A▲ 897.00024 S07JLD6 636.00 S07JLD62A 897.00048 S09JLD6▲ 636.00 S09JLD62A 897.00125 S11JLD6 636.00 S11JLD62A▲ 897.00250 S13JLD6▲ 636.00 S13JLD62A▲ 897.00Sensitrip AmmeterUndervoltage Trip CombinationsControl 1 Undervoltage Trip and 1 Undervoltage Trip andVoltage 1 Undervoltage Trip 1 Auxiliary Switch 2 Auxiliary SwitchesAC DC Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $120 U01JLD6 636.00 U01JLD62A 897.00 U01JLD62AA 1157.00208 U02JLD6▲ 636.00 U02JLD62A▲ 897.00 U02JLD62AA▲ 1157.00240 U03JLD6 636.00 U03JLD62A▲ 897.00 U03JLD62AA▲ 1157.00480 U06JLD6 636.00 U06JLD64A▲ 897.00 U06JLD64AA▲ 1157.00024 U13JLD6 636.00 U13JLD62A 897.00 U13JLD62AA 1157.00048 U14JLD6▲ 636.00 U14JLD62A▲ 897.00 U14JLD62AA▲ 1157.00125 U10JLD6▲ 636.00 U10JLD62A▲ 897.00 U10JLD62AA▲ 1157.00250 U12JLD6▲ 636.00 U12JLD62A▲ 897.00 U12JLD62AA▲ 1157.006MOLDED CASECIRCUIT BREAKERSThe Ammeter Display Units plug intothe Sensitrip Trip Unit and displaysthe phrase current flowing in theSADU breaker. They are powered bythe breaker’s CT’s with replaceablebattery back-up for maintaining tripand max logs.The SADU reads currents, currentimbalance, current demand, and tripstatus.Ammeter Mounting KitThe Ammeter may also be panel ordoor mounted using the SADURMK18remote mounting kit.Auxiliary Switch CombinationsMaximum Voltage 1 Form C 2 Form CAC DC Catalog Number List Price $ Catalog Number List Price $480 250 A01JLD64 271.00 A02JLD64 540.00— 12 A01JLDLV 342.00 A02JLDLV 684.00Alarm Switch CombinationsMaximum 1 Alarm Switch and 1 Alarm Switch andVoltage 1 Alarm Switch 1 Auxiliary Switch 2 Auxiliary SwitchesCatalog List Catalog List Catalog ListAC DC Number Price $ Number Price $ Number Price $480 250 B01JLD64 271.00 A01JLD64B 540.00 A02JLD64B 802.00Plug-in Ammeter Display UnitsBreaker Type Description Catalog Number List Price $SJD, SLDDisplay Unit SADU 1776.00Remote Mounting Kit SADURMK18 342.00Note: Accessory modules can only be added to rightside pole of solid state SJD and SLD frame circuitbreakers. No accessories can be added ifmechanical interlock is used. All accessories on thispage are useable on superseded JD2, JJ6, JL6, HJ6,SJL, LJ6, LL6, HL6 and SLL circuit breakers.▲ Built to order. Allow 6–8 weeks for delivery.6-50Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersMD 800A Frame Sentron SeriesType MXD6 Non-Interchangeable Trip (Assembled Circuit Breaker Without Lugs)Continuous 2-Pole 3-PoleCurrent Rating Catalog List Catalog List@ 40°C Number Price $ Number Price $500 MXD62B500■ 6242.00 MXD63B500■ 7902.00600 MXD62B600■ 6242.00 MXD63B600 7902.00700 MXD62B700■ 6242.00 MXD63B700 7902.00800 MXD62B800■ 6242.00 MXD63B800 7902.00Type MD6 Interchangeable Trip3-Pole 600V AC, 500V DC ■ Built to order. Allow 2–3 weeks for delivery.MXD6 circuit breakers are UL Listed for reverseconnection applications.2-pole units available in 3-pole width only. When wired as shown on page 6-3, this circuit breakeris UL listed and rated for use on 500V DC ungroundedUPS systems.Blue LabelComplete BreakerContinuousUnassembled with Lugs Frame Only Trip Unit OnlyCurrent Setting Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $500 MD63B500 8491.00 MD63T500 3747.00600 MD63B600 8491.00MD63F800 4156.00MD63T600 3747.00700 MD63B700 8491.00 MD63T700 3747.00800 MD63B800 8491.00 MD63T800 3747.00Lugs Blue Label2-Pole 600V AC, 250V DC 500 MD62B500■ 6632.00 MD62T500■ 2987.00600 MD62B600■ 6632.00MD62F800■ 3253.00MD62T600■ 2987.00700 MD62B700■ 6632.00 MD62T700■ 2987.00800 MD62B800■ 6632.00 MD62T800■ 2987.00Catalog Cables Lugs Wire ListNumber Per Lug Per Kit Range Price $TA2K500 1-2 1 #1-500 kcmil Cu/Al 71.00TA3K500 1-3 1 1/0-500 kcmil Cu/Al 98.00TC2K500 1-2 1 #1-500 kcmil Cu 120.00TC3K350 1-3 1 #1-350 kcmil Cu 151.00Kits2TA2N8750 2 365.003TA2N8750 1-2 3 500-750 kcmil Cu/Al 513.002TA3N8750 2 579.003TA3N8750 1-3 3 500-750 kcmil Cu/Al 832.002TA4N8500 2 588.003TA4N8500 1-4 3 250-500 kcmil Cu/Al 853.002TA4P8500 2 584.003TA4P8500 1-4 3 250-500 kcmil Cu/Al 843.00Instantaneous Adjustment Trip RangeAmpereNominal Instantaneous ValuesRating Low +/- 20% 2 3 4 5 6 7 High +/- 20%ToleranceTolerance500–600 3000 3430 3860 4280 4710 5140 5570 6000700–800 4000 4570 5140 5710 6280 6850 7420 8000 See Note: A, page 6-81. 80% rated breakers with the CE mark will also bemarked in the 100% rated version. HACR rated.Note: MD frame qualified to UL489 supplement B “NAVAL”.See page 6-84 for additional information.Ordering InformationShipping WeightsSelectionComplete Breaker Unassembledwith LugsPricing information for MD6 andHMD6 breakers includes frame, trip,and both line and load lugs(TA3K500). When ordered by thesecatalog numbers, the customer willreceive the frame, trip and lugsseparately packaged. Forapplications requiring different lugs,order individual items as needed.Complete Breaker Assembled withoutLugsPrices of MXD6, HMXD6 andCMD6 include frame withnon-interchangeable trip unitsinstalled only. Order required lugsseparately. For line and load lugs(TA3K500) installed, add suffix “L”to catalog number (add 2 times listprice of lugs for each pole).100% Rated Types MXD6, HMXD6 and CMD6breakers are available with 100%ratings. To order add suffix “H” tocatalog number, and 10% to listprice. 100% rated MD breakersrequire the use of 90°C Cu cablesized at 75°C ampacity and lugs2TA4P8500 or 2TA2N8750 for2-pole; 3TA4P8500 or 3TA2N8750for 3-pole.50°C Applications see page 6-84.400Hz Applications see page 6-84.Number of Number per ShippingPoles Carton Weight (lbs.)MD6, HMD6, HMXD6, CMD6Complete Breaker Assembled(less lugs)2 1 533 1 61.5MD6, HMD6 Frame Only2 1 42.253 1 46MD6, HMD6 Trip Unit Only2 1 4.53 1 6.5EnclosuresCatalog ListType Number Price $1 MND61 897.003R MND63 2202.0012 MND612■ 2883.00Neutral W63623 606.00Modifications page 6-84Enclosures Section 5Accessories pages 6-54 and 6-86 to 6-916MOLDED CASECIRCUIT BREAKERSDiscount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-51

Molded Case Circuit BreakersMD 800A Frame Sentron SeriesType HMXD6 Black LabelNon-Interchangeable Trip (Assembled Circuit Breaker Without Lugs)2-Pole3-PoleContinuous600V AC/250V DC600V AC/500V DCCurrent Rating Catalog List@ 40°C Number Price $500 For 2-pole application use HMXD63B500■ 9567.00600 outside poles of 3-poleHMXD63B600■ 9567.00700 circuit breakerHMXD63B700■ 9567.00800 HMXD63B800 9567.00Selection/DimensionsType HMD6 Interchangeable TripBlack LabelComplete BreakerContinuousUnassembled with Lugs Frame Only Trip Unit OnlyCurrent Rating Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $2-Pole 600V AC, 250V DC 500 HMD62B500■ 7905.00 MD62T500■ 2987.00600 HMD62B600■ 7905.00HMD62F800■ 4526.00MD62T600■ 2987.00700 HMD62B700■ 7905.00 MD62T700■ 2987.00800 HMD62B800■ 7905.00 MD62T800■ 2987.006MOLDED CASECIRCUIT BREAKERS3-Pole 600V AC, 500V DC 500 HMD63B500 10154.00 MD63T500 3747.00600 HMD63B600 10154.00HMD63F800 5819.00MD63T600 3747.00700 HMD63B700 10154.00 MD63T700 3747.00800 HMD63B800 10154.00 MD63T800 3747.00Type CMD6 Fuseless Current LimitingNon-Interchangeable Trip (Assembled Circuit Breaker Without Lugs)2-Pole3-PoleRed LabelContinuous600V AC/250V DC600V AC/500V DCCurrent Rating Catalog List@ 40°C Number Price $500For 2-pole application useCMD63B500■ 14089.00600outside poles of 3-poleCMD63B600■ 14089.00700circuit breakerCMD63B700■ 14089.00800 CMD63B800■ 14089.00Interrupting RatingsUL 489 AIR—File E10848RMS Symmetrical Amperes (KA)IEC 947-2 AIRVolts AC (50/60HZ)BreakerVolts AC Volts DC 220/240 380/415 500Type 240 480 600 250 500 (lcu) (lcs) (lcu) (lcs) (lcu) (lcsMD6, MXD6 065 050 25 30 (2-P) 25 (3-P) 065 033 040 20 30 15HMD6, HMXD6 100 065 50 30 (2-P) 50 (3-P) 100 050 065 33 42 21CMD6 200 100 65 — 50 (3-P) 200 100 100 50 65 33LugWhen wire lug shield NDTS is used.Note: NDTS lug shields are required when oversized lugsare used. The kits include the NDTS shield.Dimensions (in inches)(ToBreakerHandle)Type W L D D1MD6, MXD6, HMD6,HMXD6, CMD6,MXD6-ETI, CMD6-ETI,9 16 6 8.25SMD6, SHMD6, andSCMD6with lug shields 9 24 6 8.25For inches / millimeters conversion, see Application Data section.■ Built to order. Allow 2–3 weeks for delivery.HMXD6 and CMD circuit breakers are UL listed forreverse connection applications.2-pole units available in 3-pole width only. MXD6-ETI, CMD6-ETI see page 6-66 for catalog information.When wired as shown on page 6-3, this circuit breaker isUL listed and rated for use on 500V DC ungrounded UPSsystems only. HACR rated.6-52Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersSMD 800A Frame Digital Solid State Sentron Sensitrip III Series Type SMD6Type SHMD6Current LimitingType SCMD6Blue Label Black Label Red Label3-Pole, 600V ACMaxCatalog Current ListNumber Rating Price $SMD69600A■ 600 8595.00SMD69700A■ 700 8595.00SMD69800A■ 800 8595.00SMD69600AG■ 600 10214.00SMD69700AG■ 700 10214.00SMD69800AG■ 800 10214.00SMD69600ANT■ 600 8896.00SMD69700ANT■ 700 8896.00SMD69800ANT■ 800 8896.00SMD69600ANGT■ 600 11825.00SMD69700ANGT■ 700 11825.00SMD69800ANGT■ 800 11825.00SMD 800A Frame – 100% Rated Type SMD6-H Type SHMD6-HCurrent LimitingType SCMD6-HBlue Label Black Label Red Label3-Pole, 600V ACMaxCatalog Current ListNumber Rating Price $SMD69600AH■ 600 9451.00SMD69700AH■ 700 9451.00SMD69800AH■ 800 9451.00SMD69600AGH■ 600 11249.00SMD69700AGH■ 700 11249.00SMD69800AGH■ 800 11249.00SMD69600ANTH■ 600 9861.00SMD69700ANTH■ 700 9861.00SMD69800ANTH■ 800 9861.00SMD69600ANGTH■ 600 13024.00SMD69700ANGTH■ 700 13024.00SMD69800ANGTH■ 800 13024.003-Pole, 600V ACMaxCatalogCurrent ListNumber Rating Price $SHMD69600A■ 600 10478.00SHMD69700A■ 700 10478.00SHMD69800A■ 800 10478.00SHMD69600AG■ 600 12060.00SHMD69700AG■ 700 12060.00SHMD69800AG■ 800 12060.00SHMD69600ANT■ 600 10800.00SHMD69700ANT■ 700 10800.00SHMD69800ANT■ 800 10800.00SHMD69600ANGT■ 600 13886.00SHMD69700ANGT■ 700 13886.00SHMD69800ANGT■ 800 13886.003-Pole, 600V ACMaxCatalog Current ListNumber Rating Price $SHMD69600AH■ 600 11529.00SHMD69700AH■ 700 11529.00SHMD69800AH■ 800 11529.00SHMD69600AGH■ 600 13269.00SHMD69700AGH■ 700 13269.00SHMD69800AGH■ 800 13269.00SHMD69600ANTH■ 600 11900.00SHMD69700ANTH■ 700 11900.00SHMD69800ANTH■ 800 11900.00SHMD69600ANGTH■ 600 15291.00SHMD69700ANGTH■ 700 15291.00SHMD69800ANGTH■ 800 15291.003-Pole, 600V ACMaxCatalogCurrent ListNumber Rating Price $SCMD69600A■ 600 15559.00SCMD69700A■ 700 15559.00SCMD69800A■ 800 15559.00SCMD69600AG■ 600 18543.00SCMD69700AG■ 700 18543.00SCMD69800AG■ 800 18543.00SCMD69600ANT■ 600 16837.00SCMD69700ANT■ 700 16837.00SCMD69800ANT■ 800 16837.00SCMD69600ANGT■ 600 21472.00SCMD69700ANGT■ 700 21472.00SCMD69800ANGT■ 800 21472.003-Pole, 600V ACMaxCatalogCurrent ListNumber Rating Price $SCMD69600AH■ 600 17114.00SCMD69700AH■ 700 17114.00SCMD69800AH■ 800 17114.00SCMD69600AGH■ 600 20408.00SCMD69700AGH■ 700 20408.00SCMD69800AGH■ 800 20408.00SCMD69600ANTH■ 600 18506.00SCMD69700ANTH■ 700 18506.00SCMD69800ANTH■ 800 18506.00SCMD69600ANGTH■ 600 23639.00SCMD69700ANGTH■ 700 23639.00SCMD69800ANGTH■ 800 23639.00SelectionOrdering InformationPricing information for all DigitalSentron Series MD frames is for completebreaker only. Price requires lugs orlug kits as separate items. Lugs are suitablefor 75°C wire or as noted.Connector wire ranges and cavities areestablished in conjunction with Table 8.1of UL 489 standards. Choose actual connectorfor circuit breakers based on customerrequirements.Recommended Terminal ConnectorsBreaker Ampere Connector orFrame Rating Connector KitMD 500–600 TA2K500MD 700–800 TA3K500Types SMD6 and SHMD6 are acceptable forreverse connection applications.Shipping WeightsBreaker Number per ShippingType Carton Weight (lbs)All types 1 61.5Lugs for 75°C Wire CablesCatalog per Wire ListNumber Lug Range Price $TA2K500 2 #1-500 kcmil Cu/Al 71.00TA3K500 3 #1-500 kcmil Cu/Al 98.00TC2K500 2 #1-500 kcmil Cu 120.00TC3K350 3 #1-350 kcmil Cu 151.00Kits (3 lugs/kit)3TA4N8500 4 250–500 kcmil Cu/Al 853.003TA4P8500 4 250–500 kcmil Cu/Al 843.003TA2N8750 2 500–750 kcmil Cu/Al 513.003TA3N8750 3 500–750 kcmil Cu/Al 832.00Each kit contains the following:3TA4P8500—3 connectors plus 1 NDTS end barrier3TA3N8750—3 connectors plus 1 NDTS end barrier3TA2N8750—3 connectors plus 1 NDTS end barrier6MOLDED CASECIRCUIT BREAKERSTrip Unit Adjustable FunctionsSuffix Cont Long Instan- Short Short Ground GroundLetter Trip Current Time taneous Time Time Fault FaultCode Type Setting Delay Setting Pick Up Delay Pick Up DelayA LI AG LIG ANT LSI ANGT LSIG Interrupting RatingsBreakerRMS Symmetrical kA UL 489 (File E10848)Type 240V AC 480V AC 600V ACSMD6 065 050 25SHMD6 100 065 50SCMD6 200 100 65Neutral TransformersAmpere Catalog ListRating Number Price $0600 N06SMDA 423.000700 N07SMDA 423.000800 N08SMDA 423.00EnclosuresCatalog ListType Number Price $1 MND61 897.003R MND63 2202.0012 MND612 2883.00Neutral W63623 606.00Note: “G” suffix in catalog number denotes circuitbreaker for 3-phase, 3-wire circuits.For 3-phase, 4-wire, order correct 4th wire (neutral)transformer as separate and additional item.■ Built to order. Allow 2–3 weeks for delivery. Use 2-3TA4P8500 for 3-pole. These kits are rated for90°C wire. 90°C Cu only cable must be used, and sizedper 75°C ampacity. For additional information, see Note: A, page 6-81. SMD6, SHMD6 and SCMD6 circuit breakers are ULListed for reverse connection applications.Enclosures Section 5Accessories pages 6-54 and 6-86 to 6-91Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-53

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersInternal AccessoriesAccessories for:MD/SMD 800A FrameND/SND 1200A FramePD/SPD 1600A FrameRD 2000A FrameAccessory modules can mount in eitherleft hand or right hand poles of all circuitbreakers, including solid state. Exception:when mechanical interlock is used.Accessories cannot be mounted in leftpole.Sensitrip AmmeterThe Ammeter Display Units plug intothe Sensitrip Trip Unit and displaysthe phase current flowing in thebreaker. They are powered by thebreaker’s CT’s with replaceablebattery back-up for maintaining tripand max logs.The SADU reads currents, currentimbalance, current demand, and tripstatus.Ammeter Mounting KitThe Ammeter may also be panel ordoor mounted using the SADURMK18remote mounting kit.Shunt Trip Combinations1 Shunt Trip andControl Voltage 1 Shunt Trip 1 Auxiliary SwitchSelectionAC DC Catalog Number List Price $ Catalog Number List Price $120 S01MN6 636.00 S01MN64A 897.00208 S02MN6▲ 636.00 — —240 S03MN6 636.00 S03MN64A▲ 897.00277 S15MN6▲ 636.00 S15MN64A▲ 897.00480 S04MN6▲ 636.00 S04MN64A▲ 897.00600 S06MN6▲ 636.00 — —Breaker Type Description Catalog Number List Price $SMD, SND, SPD012 S16MN6▲ 636.00 S16MN64A▲ 897.00024 S07MN6 636.00 S07MN64A 897.00048 S09MN6▲ 636.00 — —125 S11MN6 636.00 S11MN64A▲ 897.00250 S13MN6▲ 636.00 S13MN64A▲ 636.00Undervoltage Trip CombinationsControl 1 Undervoltage Trip and 1 Undervoltage Trip andVoltage 1 Undervoltage Trip 1 Auxiliary Switch 2 Auxiliary SwitchesAC DC Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $120 U01MN6 636.00 U01MN64A 897.00 U01MN64AA 1157.00208 U02MN6▲ 636.00 U02MN64A▲ 897.00 U02MN64AA▲ 1157.00240 U03MN6▲ 636.00 U03MN64A▲ 897.00 U03MN64AA▲ 1157.00277 U15MN6▲ 636.00 U15MN64A▲ 897.00 U15MN64AA▲ 1157.00480 U04MN6▲ 636.00 U04MN64A▲ 897.00 U04MN64AA▲ 1157.00600 U06MN6▲ 636.00 — —-- — —---024 U07MN6 636.00 U07MN64A 897.00 U07MN64AA 1157.00048 U09MN6▲ 636.00 U09MN64A▲ 897.00 U09MN64AA▲ 1157.00125 U11MN6▲ 636.00 U11MN64A▲ 897.00 U11MN64AA▲ 1157.00250 U13MN6▲ 636.00 U13MN64A▲ 897.00 U13MN64AA▲ 1157.00Auxiliary Switch CombinationsMaximum Voltage 1 Form C 2 Form CAC DC Catalog Number List Price $ Catalog Number List Price $480 250 A01MN64 271.00 A02MN64 540.00— 12 A01MNDLV▲ 342.00 A02MNDLV▲ 684.00Alarm Switch CombinationsMaximum 1 Alarm Switch and 1 Alarm Switch andVoltage 1 Alarm Switch 1 Auxiliary Switch 2 Auxiliary SwitchesAC DC Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $480 250 B00MN64 271.00 A01MN64B 540.00 A02MN64B 802.00Plug-in Ammeter Display UnitsDisplay Unit SADU 1776.00Remote Mounting Kit SADURMK18 342.00▲ Built to order. Allow 6–8 weeks for delivery.6-54Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersND 1200A Frame Sentron SeriesType NXD6 Interrupting RatingsRMS Symmetrical Amperes (KA)UL 489 A IR IEC 947-2Blue LabelNon-Interchangeable Trip (Assembled Circuit Breaker Without Lugs)2-Pole600V ACContinuous 250V DC3-Pole600V AC500V DCCurrent Rating Catalog List Catalog List@ 40°C Number Price $ Number Price $0900 NXD62B900■ 10498.00 NXD63B900 13167.001000 NXD62B100■ 10498.00 NXD63B100 13167.001200 NXD62B120■ 10498.00 NXD63B120 13167.00Type ND6 Interchangeable TripBlue LabelComplete BreakerContinuousUnassembled with Lugs Frame Only Trip Unit OnlyCurrent Rating Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $2-Pole 600V AC, 250V DC 0800 ND62B800■ 9587.00 MD62T800■ 2987.000900 ND62B900■ 11675.00ND62F120 5424.00ND62T900■ 5075.001000 ND62B100■ 11675.00 ND62T100■ 5075.001200 ND62B120 11675.00 ND62T120 5075.000800 ND63B800 12259.00 MD63T800 3747.000900 ND63B900 14874.00ND63F120 6806.00ND63T900 6362.001000 ND63B100 14874.00 ND63T100 6362.001200 ND63B120 14874.00 ND63T120 6362.00BreakerVolts AC Volts DC Volts AC (50/60HZ)Type 240 480 600 250 500 220/240 380/415 500(lcu) (lcs) (lcu) (lcs) (lcu) (lcs)ND6, NXD6 65 50 25 30 (2-P) 25 (3-P) 65 33 40 20 30 15HND6, HNXD6 100 65 50 30 (2-P) 50 (3-P) 100 50 65 33 42 21CND6 200 100 65 — 50 (3-P) 200 100 100 50 65 33Instantaneous Adjustment Trip RangeNominal Instantaneous Values+20% +20%Breaker Ampere Tolerance ToleranceRating Low 2 3 4 5 6 7 High800 4000 4570 5140 5710 6280 6850 7420 08000900-1200 5000 5715 6430 7145 7860 8575 9290 10000Ordering InformationSelectionComplete Breaker Unassembledwith LugsPrices of ND6 and HND6 breakersinclude frame, trip, and both line andload lugs (3TA4N8500). These catalognumbers are the frame, trip and lugsseparately packaged. For applicationsrequiring different lugs, orderindividual items as needed.Complete Breaker Assembledwithout LugsPrices of NXD6, HNXD6, andCND6 include frame withnon-interchangeable trip unitsinstalled only. Order requiredterminal connectors separately.For line and load lugs (3TA4N8500)installed, add suffix “L” to catalognumber (add 2 times list price oflug kit).100% Rated Types NXD6, HNXD6 and CND6breakers are available with 100%ratings. To order, add suffix “H” tocatalog number, and add 10% tolist price. 100% rated ND breakersrequire 90°C Cu cable sized at 75°Campacity and lug kit 3TA4P8500or 3TA3N8750.50°C Applications see page 6-84.400Hz Applications see page 6-84.Catalog Cables Wire ListNumber per Lug Range Price $TA2K500 2 #1-500 kcmil Cu/Al 71.00TA3K500 3 #1-500 kcmil Cu/Al 98.00TC2K500 2 #1-500 kcmil Cu 120.00TC3K350 3 #1-350 kcmil Cu 151.00Kits (2 Kits required per breaker)2TA4P8500 3TA4P8500 4 250-500 kcmil Cu/Al584.00843.002TA4N8500 3TA4N8500 4 250-500 kcmil Cu/Al588.00853.002TA2N87503TA2N87502 500-750 kcmil Cu/Al365.00513.002TA3N87503TA3N87503 500-750 kcmil Cu/Al579.00832.00Enclosures6MOLDED CASECIRCUIT BREAKERS3-Pole 600V AC, 500V DC Lugs Catalog ListType Number Price $1 MND61 897.003R MND63 2202.0012 MND612■ 2883.00Neutral W63623 606.00■ Built to order. Allow 2–3 weeks for delivery.NXD6 circuit breakers are UL listed for reverseconnection applications.2-pole units available in 3-pole width only.When wired as shown on page 6-3, this circuit breaker isUL listed and rated for use on 500VDC ungrounded UPSsystems only.Use 2 – 3TA4P8500 kits for 3-pole, or 2 – 2TA4P8500kits for 2-pole. Use for 100% rated breakers.Use 2 – 3TA4N8500 for 3-pole or 2 – 2TA4N8500 for2-pole. Rated for 75°C cable.See Note: A, page 6-81.80% rated breakers with the CE mark will also bemarked in the 100% rated version.HACR rated.Note: ND frame qualified to UL489 supplement B “NAVAL”.See page 6-84 for additional information.Modifications page 6-84Enclosures Section 5Accessories pages 6-58 and 6-86 to 6-91Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-55

Molded Case Circuit BreakersND 1200A Frame Sentron SeriesType HNXD6 Non-Interchangeable Trip (Assembled Circuit Breaker Without Lugs)2-Pole3-PoleBlack LabelContinuous600V AC/250V DC600V AC/500V DCCurrent Rating Catalog List@ 40°C Number Price $0900 For 2-pole application use outside HNXD63B900 14794.001000 poles of 3-pole circuit breakerHNXD63B100 14794.001200 HNXD63B120 14794.00Selection/DimensionsType HND6 Interchangeable TripBlack LabelComplete BreakerContinuousUnassembled with Lugs Frame Only Trip Unit OnlyCurrent Rating Catalog List Catalog List Catalog List@ 40°C Number Price $ Number Price $ Number Price $2-Pole 600V AC, 250V DC 08000900For 2-pole application use outside poles of 3-pole circuit breaker100012006MOLDED CASECIRCUIT BREAKERS3-Pole 600V AC, 500V DC 0800 HND63B800 13883.00 MD63T800 3747.000900 HND63B900 16498.00HND63F120 8430.00ND63T900 6362.001000 HND63B100 16498.00 ND63T100 6362.001200 HND63B120 16498.00 ND63T120 6362.00Type CND6 Fuseless Current LimitingRed LabelNon-Interchangeable Trip (Assembled Circuit Breaker)Continuous2-Pole3-PoleCurrent Rating Catalog List@ 40°C Number Price $0900 For 2-pole application, CND63B900■ 20489.001000 use outside poles of CND63B100 20489.001200 3-pole circuit breaker CND63B120 20489.00Shipping WeightsNumber of Number per ShippingPoles Carton Weight (lbs.)ND6, HND6, NXD6, HNXD6, CND6Assembled Breaker (less terminals)2 1 533 1 61.5ND6, HND6 Frame Only2 1 42.253 1 46ND6, HND6 Trip Unit Only2 1 04.53 1 06.5LugsWhen lugs shield NDTS is used.Note: NDTS lug shields are required when oversized lugsTA4P8500 or TA4N8500 are used. The kits includethe NDTS shield.Dimensions (in inches)BreakerType W L D D1ND6, NXD6, HND6,HNXD6, CND6,SND6, SHND6, and9 16 6 8.25SCND6with NDTSlug shield9 24 6 8.25For inches / millimeters conversion, see Application Data section.■ Built to order. Allow 2–3 weeks for delivery.HNXD6 and CND6 circuit breakers are UL Listed forreverse connection applications.2-pole units available in 3-pole width only. When wired as shown on page 6-3, this circuit breaker isUL listed and rated for use on 500V DC ungroundedUPS systems only. HACR rated.6-56Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersSND 1200A Frame Digital Solid State Sentron Sensitrip III Series Type SND6Type SHND6Current LimitingType SCND6Blue Label Black Label Red Label3-Pole, 600V ACMax ListCatalog Current PriceNumber Rating $SND69800A■ 800 13569.00SND69100A■ 1000 13569.00SND69120A■ 1200 13569.00SND69800AG■ 800 15272.00SND69100AG■ 1000 15272.00SND69120AG■ 1200 15272.00SND69800ANT■ 800 14192.00SND69100ANT■ 1000 14192.00SND69120ANT■ 1200 14192.00SND69800ANGT■ 800 17120.00SND69100ANGT■ 1000 17120.00SND69120ANGT■ 1200 17120.003-Pole, 600V ACMax ListCatalogCurrent PriceNumber Rating $SHND69800A■ 800 15151.00SHND69100A■ 1000 15151.00SHND69120A■ 1200 15151.00SHND69800AG■ 800 16733.00SHND69100AG■ 1000 16733.00SHND69120AG■ 1200 16733.00SHND69800ANT■ 800 15772.00SHND69100ANT■ 1000 15772.00SHND69120ANT■ 1200 15772.00SHND69800ANGT■ 800 18738.00SHND69100ANGT■ 1000 18738.00SHND69120ANGT■ 1200 18738.003-Pole, 600V ACMax ListCatalog Current PriceNumber Rating $SCND69800A■ 800 20855.00SCND69100A■ 1000 20855.00SCND69120A■ 1200 20855.00SCND69800AG■ 800 22969.00SCND69100AG■ 1000 22969.00SCND69120AG■ 1200 22969.00SCND69800ANT■ 800 21700.00SCND69100ANT■ 1000 21700.00SCND69120ANT■ 1200 21700.00SCND69800ANGT■ 800 25762.00SCND69100ANGT■ 1000 25762.00SCND69120ANGT■ 1200 25762.00SelectionSND 1200A Frame – 100% Rated Type SND6-HType SHND6HCurrent LimitingType SCND6-HBlue Label Black Label Red Label3-Pole, 600V ACMax ListCatalogCurrent PriceNumber Rating $SND69800AH■ 800 14955.00SND69100AH■ 1000 14955.00SND69120AH■ 1200 14955.00SND69800AGH■ 800 16766.00SND69100AGH■ 1000 16766.00SND69120AGH■ 1200 16766.00SND69800ANTH■ 800 15628.00SND69100ANTH■ 1000 15628.00SND69120ANTH■ 1200 15628.00SND69800ANGTH■ 800 18826.00SND69100ANGTH■ 1000 18826.00SND69120ANGTH■ 1200 18826.003-Pole, 600V ACMax ListCatalogCurrent PriceNumber Rating $SHND69800AH■ 800 16657.00SHND69100AH■ 1000 16657.00SHND69120AH■ 1200 16657.00SHND69800AGH■ 800 18418.00SHND69100AGH■ 1000 18418.00SHND69120AGH■ 1200 18418.00SHND69800ANTH■ 800 17335.00SHND69100ANTH■ 1000 17335.00SHND69120ANTH■ 1200 17335.00SHND69800ANGTH■ 800 20620.00SHND69100ANGTH■ 1000 20620.00SHND69120ANGTH■ 1200 20620.003-Pole, 600V ACMax ListCatalogCurrent PriceNumber Rating $SCND69800AH■ 800 24085.00SCND69100AH■ 1000 24085.00SCND69120AH■ 1200 24085.00SCND69800AGH■ 800 26551.00SCND69100AGH■ 1000 26551.00SCND69120AGH■ 1200 26551.00SCND69800ANTH■ 800 25060.00SCND69100ANTH■ 1000 25060.00SCND69120ANTH■ 1200 25060.00SCND69800ANGTH■ 800 29750.00SCND69100ANGTH■ 1000 29750.00SCND69120ANGTH■ 1200 29750.006MOLDED CASECIRCUIT BREAKERSTrip Unit Adjustable FunctionsShortSuffix Cont Long Instan- Short Short Time Ground GroundLetter Trip Current Time taneous Time Time l 2 t Fault FaultCode Type Setting Delay Setting Pick Up Delay Pick Up Pick Up DelayA LI AG LIG ANT LSI ANGT LSIG Interrupting RatingsBreakerRMS Symmetrical kA UL 489 (File E10848)Type 240V AC 480V AC 600V ACSND6 065 050 25SHND6 100 065 50SCND6 200 100 65Neutral TransformersAmpere Catalog ListRating Number Price $0800 N08SMDA 423.001000 N10SNDA 423.001200 N12SNDA 423.00For inches / millimeters conversion, see Application Data section.For ordering information and terminal connectors,and enclosures, see page 6-55.Note: “G” suffix in catalog number denotes circuitbreaker for 3-phase, 3-wire circuits.For 3-phase, 4-wire, order correct 4th wire (neutral)transformer as separate and additional item.Discount Schedule MCCB■ Built to order. Allow 2–3 weeks for delivery. Use 2-3TA4P8500 for 3-pole. These kits are rated for90°C wire. 90°C Cu only cable must be used, and sizedper 75°C ampacity. SND6, SHND6 and SCND6 circuit breakers are ULListed for reverse connection applications.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-57

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersInternal AccessoriesAccessories for:MD/SMD 800A FrameND/SND 1200A FramePD/SPD 1600A FrameRD 2000A FrameAccessory modules can mount in eitherleft hand or right hand poles of all circuitbreakers, including solid state. Exception:when mechanical interlock is used.Accessories cannot be mounted in leftpole.Sensitrip AmmeterThe Ammeter Display Units plug intothe Sensitrip Trip Unit and displaysthe phase current flowing in thebreaker. They are powered by thebreaker’s CT’s with replaceablebattery back-up for maintaining tripand max logs.The SADU reads currents, currentimbalance, current demand, and tripstatus.Ammeter Mounting KitThe Ammeter may also be panel ordoor mounted using the SADURMK18remote mounting kit.Shunt Trip Combinations1 Shunt Trip andControl Voltage 1 Shunt Trip 1 Auxiliary SwitchSelectionAC DC Catalog Number List Price $ Catalog Number List Price $120 S01MN6 636.00 S01MN64A 636.00208 S02MN6▲ 636.00 — —240 S03MN6 636.00 S03MN64A▲ 897.00277 S15MN6▲ 636.00 S15MN64A▲ 897.00480 S04MN6▲ 636.00 S04MN64A▲ 897.00600 S06MN6▲ 636.00 — —Breaker Type Description Catalog Number List Price $SMD, SND, SPD012 S16MN6▲ 636.00 S16MN64A▲ 897.00024 S07MN6 636.00 S07MN64A 897.00048 S09MN6▲ 636.00 — —125 S11MN6 636.00 S11MN64A▲ 897.00250 S13MN6▲ 636.00 S13MN64A▲ 897.00Undervoltage Trip CombinationsControl 1 Undervoltage Trip and 1 Undervoltage Trip andVoltage 1 Undervoltage Trip 1 Auxiliary Switch 2 Auxiliary SwitchesAC DC Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $120 U01MN6 636.00 U01MN64A 897.00 U01MN64AA 1157.00208 U02MN6▲ 636.00 U02MN64A▲ 897.00 U02MN64AA▲ 1157.00240 U03MN6▲ 636.00 U03MN64A▲ 897.00 U03MN64AA▲ 1157.00277 U15MN6▲ 636.00 U15MN64A▲ 897.00 U15MN64AA▲ 1157.00480 U04MN6▲ 636.00 U04MN64A▲ 897.00 U04MN64AA▲ 1157.00600 U06MN6▲ 636.00 — —-- — —---024 U07MN6 636.00 U07MN64A 897.00 U07MN64AA 1157.00048 U09MN6▲ 636.00 U09MN64A▲ 897.00 U09MN64AA▲ 1157.00125 U11MN6▲ 636.00 U11MN64A▲ 897.00 U11MN64AA▲ 1157.00250 U13MN6▲ 636.00 U13MN64A▲ 897.00 U13MN64AA▲ 1157.00Auxiliary Switch CombinationsMaximum Voltage 1 Form C 2 Form CAC DC Catalog Number List Price $ Catalog Number List Price $480 250 A01MN64 271.00 A02MN64 540.00— 12 A01MNDLV▲ 342.00 A02MNDLV▲ 684.00Alarm Switch CombinationsMaximum 1 Alarm Switch and 1 Alarm Switch andVoltage 1 Alarm Switch 1 Auxiliary Switch 2 Auxiliary SwitchesAC DC Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $480 250 B00MN64 271.00 A01MN64B 540.00 A02MN64B 802.00Plug-in Ammeter Display UnitsDisplay Unit SADU 1776.00Remote Mounting Kit SADURMK18 342.00▲ Built to order. Allow 6–8 weeks for delivery.6-58Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersPD 1600A Frame Sentron SeriesType PXD6 Non-Interchangeable Trip 3-Pole 600V AC, 250-500V DC Blue LabelContinuousComplete Breaker Assembled MountingCurrent Rating(Frame/Trip Unit Only) Assembly Lugs (6 required)40˚C Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $1200 PXD63B120■ 16870.00 MB93011400 PXD63B140■ 16870.00 -or- 1227.00 TA5P600 320.001600 PXD63B160 16870.00 MBR9302Type PD6 Interchangeable Trip Blue Label3-Pole 600V AC, 250-500V DC Complete BreakerMountingContinuousUnassembled Frame Only Trip Unit Only Assembly Lugs (6 required)Current Catalog List Catalog List Catalog List Catalog List Catalog ListRating 40°C Number Price $ Number Price $ Number Price $ Number Price $ Number Price $1200 PD63B120■ 20017.00 PD63T120■ 8199.00 MB93011400 PD63B140 20017.00 PD63F160 8671.00 PD63T140 8199.00 -or- 1227.00 TA5P600 320.001600 PD63B160 20017.00 PD63T160 8199.00 MBR9302Type HPXD6 Non-Interchangeable Trip 3-Pole 600V AC, 250-500V DC Continuous CurrentBlue LabelComplete Breaker Assembled (Frame/Trip Unit Only)Rating 40°C Catalog Number List Price $1200 HPXD63B120■ 19029.001400 HPXD63B140■ 19029.001600 HPXD63B160 19029.00Type HPD6 Interchangeable Trip 3-Pole 600V AC, 250-500V DC Complete BreakerMountingContinuousUnassembled Frame Only Trip Unit Only Assembly Lugs (6 required)Current Catalog List Catalog List Catalog List Catalog List Catalog ListRating 40°C Number Price $ Number Price $ Number Price $ Number Price $ Number Price $1200 HPD63B120■ 22174.00 PD63T120■ 8199.00 MB93011400 HPD63B140 22174.00 HPD63F160 10828.00 PD63T140 8199.00 -or- 1227.00 TA5P600 320.001600 HPD63B160 22174.00 PD63T160 8199.00 MBR9302Type CPD6 Non-Interchangeable Trip Fuseless Current Limiting3-Pole 600V AC, 250-500V DC Black LabelRed LabelContinuous CurrentComplete Breaker Assembled (Frame/Trip Unit Only)Rating 40°C Catalog Number List Price $1200 CPD63B120■ 21310.001400 CPD63B140■ 21310.001600 CPD63B160■ 21310.00Ordering InstructionsSelectionComplete Breaker Unassembledwith LugsPrices of PD6, HPD6, RD6, and HRD6type breakers include frame, trip,mounting base (MB9301), and bothline and load lugs (PD Frame –TA5P600, RD Frame – TC5R600). Whenordered by these catalog numbers, thecustomer will receive the frame, trip,mounting assembly and lugsseparately packaged. For applicationsrequiring different mounting base orlugs, order individual items as needed.Complete Breaker Assembledwithout LugsPrices of PXD6, HPXD6, RXD6, HRXD6and CPD6 type breakers include framewith non-interchangeable trip unitinstalled only. Order requiredmounting base and lugs separately.100% RatedTypes PXD6, HPXD6 breakers areavailable with 100% ratings. To orderadd suffix “H” to catalog number,and 10% to list price. 100% PDbreakers require 90˚ C cable sizedat 75˚ C ampacity and TC5R600 lugs.RD 2000A Frames not available with100% ratings.50°C Applications see page 6-84.400HZ Applications see page 6-84.Lugs No of CablesCatalog per ListNumber Connector Wire Range Price $TA5P600 1-5 Pcs. 300-600 kcmil Cu/Al 320.00TC5R600 1-5 Pcs. 300-600 kcmil Cu only 426.00TA4P750▲ 1-4 Pcs. 500-750 kcmil Cu/Al 254.00TA6R600 1-6 Pcs. 300-600 kcmil Cu/Al 338.006MOLDED CASECIRCUIT BREAKERSInterrupting RatingsUL 489 A IR IEC 947-2RMS Symmetrical KAVolts AC (50/60HZ)BreakerVolts AC Volts DC 220/240 380/415 500Type 240 480 600 250 500 (lcu) (lcs) (lcu) (lcs) (lcu) (lcs)PD6, PXD6 65 50 25 30 (2P) 25 (3P) 65 33 40 10 30 8HPD6, HPXD6 100 65 50 30 (2P) 50 (3P) 100 50 65 17 42 11CPD6 200 100 65 30 (2P) 50 (3P) 200 100 100 25 65 17■ Built to order. Allow 2–3 weeks for delivery.▲ Built to order. Allow 6–8 weeks for delivery.Use two outside poles of a 3-pole circuit breaker for 250V When wired as shown on page 6-3, this circuit breaker isUL listed and rated for use on 500V DC ungrounded UPSsystems only. PXD6, HPXD6 and CPD6 type circuit breakers are ULListed for reverse feed applications.For additional information See Note: A, page 6-81. HACR rated.Note: PD frame qualified to UL489 supplement B “NAVAL”.See page 6-84 for additional information.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-59

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersSPD 1600A Frame Digital Solid State Sentron Sensitrip III SeriesOrdering InformationPricing information for all Digital Sentron Series PD frame unit is for breakeronly. Price required mounting block assembly and necessary terminalconnectors as separate items.SPD6 and SHPD6 are acceptable for reverse connection applications.Type SPD6Blue Label3-Pole, 600V ACMaxCatalog Current ListNumber Rating Price $SPD69140■ 1400 20564.00SPD69160■ 1600 20564.00SPD69140G■ 1400 22340.00SPD69160G■ 1600 22340.00SPD69140NT■ 1400 20903.00SPD69160NT■ 1600 20903.00SPD69140NGT■ 1400 24776.00SPD69160NGT■ 1600 24776.00Interrupting RatingsAll PD, RD Frames:Type SHPD6Black Label3-Pole, 600V ACMaxCatalog Current ListNumber Rating Price $SHPD69140■ 1400 21211.00SHPD69160■ 1600 21211.00SHPD69140G■ 1400 23206.00SHPD69160G■ 1600 23206.00SHPD69140NT■ 1400 21972.00SHPD69160NT■ 1600 21972.00SHPD69140NGT■ 1400 25709.00SHPD69160NGT■ 1600 25709.00ShortSuffix Cont Long Instan- Short Short Time Ground GroundLetter Trip Current Time taneous Time Time l 2 t Fault FaultCode Type Setting Delay Setting Pick Up Delay Pick Up Pick Up DelayNone LI G LIG NT LSI NGT LSIG BreakerRMS Symmetrical kA UL 489Type 240V AC 480V AC 600V ACSPD6 065 050 025SHPD6 100 065 050Lugs Selection/DimensionsNo. ofListCatalog Cables per Wire PriceNumber Connector Range $TA5P600 1–5 pcs. 300–600 kcmil Cu/Al 320.00TC5R600 1–5 pcs. 300–600 kcmil Cu Only 426.00TA6R600 1–5 pcs. 300–600 kcmil Cu/Al 338.00Neutral TransformersAmpere Catalog ListRating Number Price $1400 N14SPD 423.001600 N16SPD 423.00EnclosureCatalog ListType Number Price $1 PRD6N1 6324.00Mounting Block (Required) CatalogListNumber Price $MB9301 1227.00MBR9302 1227.002.006.196.002.0016.0018.7316.0025.50MB9301 (shown)MBR9302MBR9302 MB9301 MBR9302MB9301For inches / millimeters conversion, see Application Data section.■ Built to order. Allow 2–3 weeks for delivery. For additional information, see Note: A, page 6-81.Note: The PD frame circuit breaker requires the use of aconnect-all mounting assembly to allow for placinginto service.Note: “G” suffix in catalog number denotes circuitbreaker for 3-phase, 3-wire circuits.For 3-phase, 4-wire, order correct 4th wire (neutral)transformer as separate and additional item.6-60Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersInternal AccessoriesAccessories for:MD/SMD 800A FrameND/SND 1200A FramePD/SPD 1600A FrameRD 2000A FrameAccessory modules can mount in eitherleft hand or right hand poles of all circuitbreakers, including solid state. Exception:when mechanical interlock is used.Accessories cannot be mounted in leftpole.Sensitrip AmmeterThe Ammeter Display Units plug intothe Sensitrip Trip Unit and displaysthe phase current flowing in thebreaker. They are powered by thebreaker’s CT’s with replaceablebattery back-up for maintaining tripand max logs.The SADU reads currents, currentimbalance, current demand, and tripstatus.Ammeter Mounting KitShunt Trip Combinations1 Shunt Trip andControl Voltage 1 Shunt Trip 1 Auxiliary SwitchSelectionAC DC Catalog Number List Price $ Catalog Number List Price $120 S01MN6 636.00 S01MN64A 897.00208 S02MN6▲ 636.00 — —240 S03MN6 636.00 S03MN64A▲ 897.00277 S15MN6▲ 636.00 S15MN64A▲ 897.00480 S04MN6▲ 636.00 S04MN64A▲ 897.00600 S06MN6▲ 636.00 — —Breaker Type Description Catalog Number List Price $SMD, SND, SPD012 S16MN6▲ 636.00 S16MN64A▲ 897.00024 S07MN6 636.00 S07MN64A 897.00048 S09MN6▲ 636.00 — —125 S11MN6 636.00 S11MN64A▲ 897.00250 S13MN6▲ 636.00 S13MN64A▲ 897.00Undervoltage Trip CombinationsControl 1 Undervoltage Trip and 1 Undervoltage Trip andVoltage 1 Undervoltage Trip 1 Auxiliary Switch 2 Auxiliary SwitchesAC DC Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $120 U01MN6 636.00 U01MN64A 897.00 U01MN64AA 1157.00208 U02MN6▲ 636.00 U02MN64A▲ 897.00 U02MN64AA▲ 1157.00240 U03MN6▲ 636.00 U03MN64A▲ 897.00 U03MN64AA▲ 1157.00277 U15MN6▲ 636.00 U15MN64A▲ 897.00 U15MN64AA▲ 1157.00480 U04MN6▲ 636.00 U04MN64A▲ 897.00 U04MN64AA▲ 1157.00600 U06MN6▲ 636.00 — — — —024 U07MN6 636.00 U07MN64A 897.00 U07MN64AA 1157.00048 U09MN6▲ 636.00 U09MN64A▲ 897.00 U09MN64AA▲ 1157.00125 U11MN6▲ 636.00 U11MN64A▲ 897.00 U11MN64AA▲ 1157.00250 U13MN6▲ 636.00 U13MN64A▲ 897.00 U13MN64AA▲ 1157.00Auxiliary Switch CombinationsMaximum Voltage 1 Form C 2 Form CAC DC Catalog Number List Price $ Catalog Number List Price $480 250 A01MN64 271.00 A02MN64 540.00— 12 A01MNDLV▲ 342.00 A02MNDLV▲ 684.00Alarm Switch CombinationsMaximum 1 Alarm Switch and 1 Alarm Switch andVoltage 1 Alarm Switch 1 Auxiliary Switch 2 Auxiliary SwitchesAC DC Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $480 250 B00MN64 271.00 A01MN64B 540.00 A02MN64B 802.00Plug-in Ammeter Display UnitsDisplay Unit SADU 1776.00Remote Mounting Kit SADURMK18 342.006MOLDED CASECIRCUIT BREAKERSThe Ammeter may also be panel ordoor mounted using the SADURMK18remote mounting kit.▲ Built to order. Allow 6–8 weeks for delivery.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-61

Molded Case Circuit BreakersRD 2000A Frame Sentron SeriesType RXD6 Blue LabelNon-Interchangeable Trip (Assembled Circuit Breaker Only Without Lugs)3-Pole 600V AC, 250-500V DC Complete BreakerAssembledMountingContinuous(Frame/Trip Unit Only) Assembly Lugs (6 required)Current Catalog List Catalog List Catalog ListRating 40°C Number Price $ Number Price $ Number Price $1600 RXD63B160 18701.00 MB9301 1227.001800 RXD63B180 18701.00 -or- TC5R600 426.002000 RXD63B200 18701.00 MBR9302 1227.00Selection6MOLDED CASECIRCUIT BREAKERSType RD6 Interchangeable Trip (Unassembled Circuit Breaker with Lugs)3-Pole 600V AC, 250-500V DC Type HRD6 Interrupting RatingsBlue LabelComplete BreakerUnassembledMountingContinuouswith Lugs Frame Only Trip Unit Only Assembly Lugs (6 required)Current Catalog List Catalog List Catalog List Catalog List Catalog ListRating 40°C Number Price $ Number Price $ Number Price $ Number Price $ Number Price $1600 RD63B160■ 22484.00 RD63T160■ 8927.00 MB9301 1227.001800 RD63B180 22484.00 RD63F200 9774.00 RD63T180 8927.00 -or- TC5R600 426.002000 RD63B200 22484.00 RD63T200 8927.00 MBR9302 1227.00Type HRXD6 Black LabelContinuousComplete Breaker AssembledCurrent Rating(Frame/Trip Unit Only)40°C Catalog Number List Price $1600 HRXD63B160■ 21025.001800 HRXD63B180■ 21025.002000 HRXD63B200 21025.00Black LabelComplete BreakerUnassembled Mounting LugsContinuouswith Lugs Frame Only Trip Unit Only Assembly (6 required)Current Catalog List Catalog List Catalog List Catalog List Catalog ListRating 40°C Number Price $ Number Price $ Number Price $ Number Price $ Number Price $1600 HRD63B160■ 24808.00 RD63T160■ 8927.00 MB9301 1227.001800 HRD63B180 24808.00 HRD63F200 12098.00 RD63T180 8927.00 -or- TC5R600 426.002000 HRD63B200 24808.00 RD63T200 8927.00 MBR9302 1227.00UL 489 A IR IEC 947-2RMS Symmetrical KAVolts AC (50/60HZ)BreakerVolts AC Volts DC 220/240 380/415 500Type 240 480 600 250 500 (lcu) (lcs) (lcu) (lcs) (lcu) (lcs)RD6, RXD6 65 50 25 30 (2P) 25 (3P) 65 33 40 10 30 8HRD6, HRXD6 100 65 50 30 (2P) 50 (3P) 100 50 65 17 42 11Mounting BlockCatalog Connection ListNumber Points Price $MB9301 Front 1227.00MBR9302 Rear 1227.00Shipping WeightsNumber of Number per ShippingPoles Carton Weight (lbs.)PXD6, HPXD6, RXD6, HRXD6, CPD6Assembled Breakers3 1 61.5PD6, HPD6, RD6, HRD6Frame Only3 1 55.0PD6, RD6Trip Unit Only3 1 06.5Mounting AssemblyMB9301 1 53.0MBR9302 1 50.9Lugs No of CablesCatalog per ListNumber Connector Wire Range Price $TA5P600 1-5 Pcs. 300-600 kcmil Cu/Al 320.00TC5R600 1-5 Pcs. 300-600 kcmil Cu only 426.00TA4P750▲ 1-4 Pcs. 500-750 kcmil Cu/Al 254.00TA6R600 1-6 Pcs. 300-600 kcmil Cu/Al 338.00Instantaneous Adjustment Trip Range (PD / RD Frames)Nominal Instantaneous Values+20% +20%Breaker Ampere Tolerance ToleranceRating Low 2 3 4 5 6 7 High1200-2000 5000 5715 6430 7145 7860 8575 9790 10,000■ Built to order. Allow 2–3 weeks for delivery.▲ Built to order. Allow 6–8 weeks for delivery.Use two outside poles of a 3-pole circuit breaker for250V DC applications.6-62 When wired as shown on page 6-3, this circuit breaker isUL listed and rated for use on 500V DC ungroundedUPS systems only. RXD6 and HRXD6 type circuit breakers are UL Listed forreverse feed applications.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog HACR rated. For additional information See Note: A, page 6-81.Note: RD frame qualified to UL489 supplement B “NAVAL”.See page 6-84 for additional information.Note: For required mounting base (MB9301 or MBR9302)see page 6-60.Discount Schedule MCCB

Molded Case Circuit BreakersInternal AccessoriesAccessories for:MD/SMD 800A FrameND/SND 1200A FramePD/SPD 1600A FrameRD 2000A FrameAccessory modules can mount in eitherleft hand or right hand poles of all circuitbreakers, including solid state. Exception:when mechanical interlock is used.Accessories cannot be mounted in leftpole.Sensitrip AmmeterThe Ammeter Display Units plug intothe Sensitrip Trip Unit and displaysthe phase current flowing in thebreaker. They are powered by thebreaker’s CT’s with replaceablebattery back-up for maintaining tripand max logs.The SADU reads currents, currentimbalance, current demand, and tripstatus.Ammeter Mounting KitThe Ammeter may also be panel ordoor mounted using the SADURMK18remote mounting kit.Shunt Trip Combinations1 Shunt Trip andControl Voltage 1 Shunt Trip 1 Auxiliary SwitchSelectionAC DC Catalog Number List Price $ Catalog Number List Price $120 S01MN6 636.00 S01MN64A 897.00208 S02MN6▲ 636.00 — —240 S03MN6 636.00 S03MN64A▲ 897.00277 S15MN6▲ 636.00 S15MN64A▲ 897.00480 S04MN6▲ 636.00 S04MN64A▲ 897.00600 S06MN6▲ 636.00 — —Breaker Type Description Catalog Number List Price $SMD, SND, SPD012 S16MN6▲ 636.00 S16MN64A▲ 897.00024 S07MN6 636.00 S07MN64A 897.00048 S09MN6▲ 636.00 — —125 S11MN6 636.00 S11MN64A▲ 897.00250 S13MN6▲ 636.00 S13MN64A▲ 897.00Undervoltage Trip CombinationsControl 1 Undervoltage Trip and 1 Undervoltage Trip andVoltage 1 Undervoltage Trip 1 Auxiliary Switch 2 Auxiliary SwitchesAC DC Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $120 U01MN6 636.00 U01MN64A 897.00 U01MN64AA 1157.00208 U02MN6▲ 636.00 U02MN64A▲ 897.00 U02MN64AA▲ 1157.00240 U03MN6▲ 636.00 U03MN64A▲ 897.00 U03MN64AA▲ 1157.00277 U15MN6▲ 636.00 U15MN64A▲ 897.00 U15MN64AA▲ 1157.00480 U04MN6▲ 636.00 U04MN64A▲ 897.00 U04MN64AA▲ 1157.00600 U06MN6▲ 636.00 — — — —024 U07MN6 636.00 U07MN64A 897.00 U07MN64AA 1157.00048 U09MN6▲ 636.00 U09MN64A▲ 897.00 U09MN64AA▲ 1157.00125 U11MN6▲ 636.00 U11MN64A▲ 897.00 U11MN64AA▲ 1157.00250 U13MN6▲ 636.00 U13MN64A▲ 897.00 U13MN64AA▲ 1157.00Auxiliary Switch CombinationsMaximum Voltage 1 Form C 2 Form CAC DC Catalog Number List Price $ Catalog Number List Price $480 250 A01MN64 271.00 A02MN64 540.00— 12 A01MNDLV▲ 342.00 A02MNDLV▲ 684.00Alarm Switch CombinationsMaximum 1 Alarm Switch and 1 Alarm Switch andVoltage 1 Alarm Switch 1 Auxiliary Switch 2 Auxiliary SwitchesAC DC Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $480 250 B00MN64 271.00 A01MN64B 540.00 A02MN64B 802.00Plug-in Ammeter Display UnitsDisplay Unit SADU 1776.00Remote Mounting Kit SADURMK18 342.006MOLDED CASECIRCUIT BREAKERS▲ Built to order. Allow 6–8 weeks for delivery.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-63

Molded Case Circuit BreakersSTD 3200A Frame Digital Solid State Sentron Sensitrip III SeriesType STD6 Type SHTD6 Type SHHTD6Blue Label Black Label Red Label3-Pole, 600V AC, 80% RatedMax ListCatalog Current PriceNumber Rating $STD63F2000■ 2000 24668.00STD63F2500■ 2500 27714.00STD63F3200■ 3200 30485.003-Pole, 600V AC, 80% RatedMax ListCatalog Current PriceNumber Rating $SHTD63F2000■ 2000 27132.00SHTD63F2500■ 2500 30485.00SHTD63F3200■ 3200 33533.003-Pole, 600V AC, 80% RatedMax ListCatalog Current PriceNumber Rating $SHHTD63F2000■ 2000 29847.00SHHTD63F2500■ 2500 33533.00SHHTD63F3200■ 3200 36884.00Selection/DimensionsOrdering InformationSTD Breakers are ordered bycomponent - Frame, Trip Unit &Rating Plug, Accessories. ContactSales Office for instructions.6MOLDED CASECIRCUIT BREAKERS3-Pole, 600V AC, 100% RatedMax ListCatalog Current PriceNumber Rating $STD63F2000H■ 2000 27132.00STD63F2500H■ 2500 30485.00STD63F3200H■ 3200 33533.00Trip UnitFits Breaker Frame with Continuous Rating2000 Amp 2500 Amp 3200 AmpListFunction Catalog Numbers Price $LS STD20TLS■ STD25TLS■ STD32TLS■ 2260.00LI STD20TLI■ STD25TLI■ STD32TLI■ 1611.00LSI STD20TLSI■ STD25TLSI■ STD32TLSI■ 2938.00LSG STD20TLSG■ STD25TLSG■ STD32TLSG■ 4260.00LIG STD20TLIG■ STD25TLIG■ STD32TLIG■ 2835.00LSIG STD20TLSIG■ STD25TLSIG■ STD32TLSIG■ 4981.00Rating PlugFits Breaker Frame with Continuous RatingLong Time2000 Amp 2500 Amp 3200 AmpListAmperes Catalog Numbers Price $1000 20STD1000■1200 20STD1200■1600 20STD1600■ 25STD1600■ 32STD1600■2000 20STD2000■ 25STD2000■ 32STD2000■ 352.002500 25STD2500■ 32STD2500■3000 32STD3000■3200 32STD3200■Interrupting Ratings3-Pole, 600V AC, 100% RatedMax ListCatalog Current PriceNumber Rating $SHTD63F2000H■ 2000 29847.00SHTD63F2500H■ 2500 36884.00SHTD63F3200H■ 3200 40573.003-Pole, 600V AC, 100% RatedMax ListCatalogCurrent PriceNumber Rating $SHHTD63F2000H■ 2000 32828.00SHHTD63F2500H■ 2500 40573.00SHHTD63F3200H■ 3200 44630.00BreakerRMS Symmetrical kA UL 489 (File E 10848) IEC60947-2 (I cu =I cs , I cw =50kA)Type 240V AC 480V AC 600V AC 415VAC 690VACSTD6 085 065 050 — —SHTD6 150 100 085 100kA 65kASHHTD6 200 150 100 — —HWDimensions (in Inches) Breaker Type H H1 W DSTDSHTD 27.5 20.5 15.5 12.5SHHTDTerminal ConnectorsCatalogListNumber Price $STD32TCON 224.00Cable Lugs(2000A Only)No ofCablesListCatalog per Con- Wire PriceNumber nector Range $TA6R600STD (1–6 pcs.) 250-600 323.00kcmil Cu/AlDNeutral TransformersH1Ampere Catalog ListRating Number Price $2000 N20STD 460.002500 N25STD 460.003200 N32STD 460.00Accessories pages 6-65 and 6-84 to 6-91■ Built to order. Allow 2–3 weeks for delivery.Dimensions for reference, not for construction.6-64Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersInternal AccessoriesAccessories for:STD 3200A FrameSTD Breakers are built to order. It isrecommended that accessories beordered installed in the breaker. Theymay also be field added.Ammeter Display ModuleThe STDDM plugs into the trip unit ofthe STD 3200 Amp breaker. It providesreadout of currents as well as load currentalarm (in conjunction with the displaymodule relay).Ground Fault MonitorThe Ground Fault Monitor for the STD3200 Amp breaker family plugs into theTrip Unit and reads the ground current.This is either the residual current calculatedfrom the measured three phasesand neutral (if present) or the directlymeasured ground return current in theground lead of the supply transformer,depending on the configuration of thethe trip unit. In addition to displaying theground current, the display module providesan alarm on ground overcurrent,settable at three pickup levels with threedelays (in conjunction with the displaymodule relay).Shunt Trip / Undervoltage ReleaseSelectionControl Voltage Shunt Trip Under Voltage ReleaseAC DC Catalog Number List Price $ Catalog Number List Price $120 STDST120▲ 776.00 STDUV120▲ 776.00240 STDST240▲ 776.00 STDUV240▲ 776.00480 STDST480▲ 776.00 STDUV480▲ 776.00600 — — STDUV600▲ 776.00012 STDST12▲ 776.00 — —024 STDST24▲ 776.00 STDUV24▲ 776.00048 STDST48▲ 776.00 STDUV48▲ 776.00125 STDST125▲ 776.00 STDUV125▲ 776.00Auxiliary SwitchesControl VoltageQuantity ContactsAC DC NO NC Catalog Number List Price $1 1 STDAS2▲ 397.002 2 STDAS4▲ 653.00600 300 3 3 STDAS6▲ 980.004 4 STDAS8▲ 1308.005 5 STDAS10▲ 1641.006 6 STDAS12▲ 1945.00Alarm SwitchControl VoltageCatalog ListAC DC Number Price $600 300 STDAS▲ 768.00Electronic Bell Alarm / Display RelayAuxiliary Power ModulePower Source Catalog Number List Price $120V AC STDAPM▲ 718.00Control Voltage Bell Alarm Display Module RelayAC DC Catalog Number List Price $ Catalog Number List Price $120 STDBA120▲ 776.00 STDDMR120▲ 776.0024 STDBA24▲ 776.00 STDDMR24▲ 776.0048 STDBA48▲ 776.00 STDDMR48▲ 776.00125 STDBA125▲ 776.00 STDDMR125▲ 776.00Ammeter-Display ModuleCatalog Number List Price $STDDM▲ 3198.00Ground Fault MonitorCatalog Number List Price $STDGFM▲ 4102.00Mounting Bracket forTerminal BlockFor mounting Control Terminal Blocks tobreakers. One per each side as required.Catalog Number List Price $STDTBM▲ 98.006MOLDED CASECIRCUIT BREAKERSSecondary Terminal BlocksThe appropriate number and location of terminal blocks should be selected from the table below based on the features and accessories ordered oneach circuit breaker. Control Terminal Blocks also require separate mounting brackets for the left and right sides.AccessoryZoneAuxiliary SwitchesContact Under- Interlock Bell Alarm 1A and 1B 4A and 4BBlock Catalog List Shunt voltage Neutral and or Display 2A and 2B 5A and 5BPosition Number Price $ Trip Release Sensor ACCESS Module Relay 3A and 3B 6A and 6BLEFT TOP STDTBLT▲ 162.00 X X XLEFT BOTTOM STDTBLB▲ 162.00 XRIGHT TOP STDTBRT▲ 162.00 X XRIGHT BOTTOM STDTBRB▲ 162.00 X X▲ Built to order. Allow 6–8 weeks for delivery.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-65

Molded Case Circuit BreakersMagnetic Trip Only — ETI Motor Circuit ProtectorSelection6MOLDED CASECIRCUIT BREAKERSInstantaneous Trip Range Complete Circuit Breaker Without LugsCatalogCatalogBreaker Ampere Number List Number ListType Rating Minimum Maximum 2-Pole Price $ 3-Pole Price $001 002.6 00009 — — ED63A001 824.00002 007 00022 — — ED63A002 824.00003 010 00035 — — ED63A003 824.00005 016 00054 — — ED63A005 824.00010 030 00100 — — ED63A010 824.00ED6-A 025 055 00180 — — ED63A025 824.00600V AC 030 080 00270 — — ED63A030 824.00250V DC 040 115 00375 — — ED63A040 824.00050 180 00600 — — ED63A050 991.00100 315 01000 — — ED63A100 1052.00125 500 01250 — — ED63A125 1997.00SHIPPING:Important InformationETI interrupting ratings are determined through combination tests with properlysized overload relays and contactors. Connectors included when ordering by circuit breaker catalog number forED6 and CED6 ETI’s. Order ETI circuit breaker and lugs (2 per pole) separatelyfor the FXD6, CFD6, MXD6, CMD6, JXD6, CJD6, LXD6 and CLD6 ETI’s.03.8 lbs. each001 002.6 00009 — — CED63A001■ 2811.00002 007 00022 — — CED63A001■ 2811.00003 010 00035 — — CED63A003■ 2811.00005 016 00054 — — CED63A005■ 2811.00CED6-A010 030 00100 — — CED63A010■ 2811.00025 055 00180 — — CED63A025■ 2811.00600V AC 030 080 00270 — — CED63A030■ 2811.00250V DC 040 115 00375 — — CED63A040■ 2811.00050 180 00600 — — CED63A050■ 3360.00100 315 01000 — — CED63A100■ 3608.00125 500 01250 — — CED63A125■ 5409.00SHIPPING:06 lbs. each150 0400 00800 — — FXD63L150■ 3448.00FXD6 150 0800 01500 — — FXD63A150 3448.00600V AC150 1100 02500 — — FXD63H150 3448.00250V DC250 1100 02500 — — FXD63A250 3448.00SHIPPING: 0 09 lbs. each150 0400 00800 — — CFD63L150■ 6664.00CFD6 150 0800 01500 — — CFD63A150■ 6664.00600V AC250V DC150 1100 02500 — — CFD63H150■ 6664.00250 1100 02500 — — CFD63A250■ 6664.00SHIPPING: 12 lbs. each 12 lbs. eachJXD6(A) 400 1250 02500 — — JXD63L400 3608.00600V AC400 2000 04000 JXD62H400■ 3077.00 JXD63H400 3608.00250V DC SHIPPING: 16 lbs. each 20 lbs. eachCJD6 400 1250 02500 CJD62L400■ 6222.00 CJD63L400■ 7742.00600V AC400 2000 04000 CJD62H400■ 6222.00 CJD63H400■ 7742.00250V DC SHIPPING: 29.5 lbs. each 31.5 lbs. eachLXD6(A) 600 2000 04000 LXD62L600■ 4616.00 LXD63L600■ 5267.00600V AC600 3000 06000 — — LXD63H600 5267.00250V DC SHIPPING: 16 lbs. each 20 lbs. eachCLD6 600 2000 04000 CLD62L600■ 10003.00 CLD63L600■ 12392.00600V AC600 3000 06000 CLD62H600■ 10003.00 CLD63H600■ 12392.00250V DC SHIPPING: 31.5 lbs. eachLMXD6 800 2800 06000 — — LMXD63L800■ 7460.00600V AC800 3200 08000 — — LMXD63A800 7460.00250V DC SHIPPING: 35 lbs. each800 3000 06000 — — MXD63L800■ 7460.00MXD6 800 4000 08000 — — MXD63A800■ 7460.00600V AC 800 5000 10000 — — MXD63H800 7460.00250V DCSHIPPING:33 lbs. each800 3000 06000 — — CMD63L800■ 14019.00CMD6 800 4000 08000 — — CMD63A800■ 14019.00600V AC 800 5000 10000 — — CMD63H800■ 14019.00250V DCSHIPPING:80 lbs. eachLug Information pages 6-81 to 6-83Enclosures Section 5Accessories pages 6-86 to 6-91Application data pages 6-67 to 6-68■ Built to order. Allow 2–3 weeks for delivery. 2-pole available in 3-pole width only. When applied on DC Circuits — Trip levels will increaseapproximately + 15 to 20%. Tolerance -20/+30%6-66 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog For 2-pole application use outside poles of 3-pole circuitbreaker.Discount Schedule MCCB

Molded Case Circuit BreakersMotor CircuitsGeneralProtection of Motor CircuitsMolded case circuit breakers are used inmotor circuits as a disconnecting meansand for short-circuit protection. Theyshould be used in conjunction withmotor-running, over-current-protectiondevices, and should permit the motor tostart without nuisance tripping frommotor-inrush current. The circuit breakershould have a continuous-current ratingof not less than 115% of the motorfull-load current.The recommended motor circuitprotectors (Siemens ETI instantaneousonly circuit breakers) listed havecontinuous-current ratings of at least115% of motor full-load currents. Thetrip-setting positions are approximately11 times motor full-load currents. Thesuggested trip settings may have to beadjusted upward to no higher than 1300%of full-load current for non-design E typemotors, and no greater than 1700% of fullload current for design E motors, to allowfor motor start-up due to inrush currents.Breaker Mounted Immediately Aheadof Motor StarterSiemens ETI motor circuit protectors arerecommended for use in combinationmotor starters to provide selectiveshort-circuit protection for the motorApplicationbranch circuit. The adjustableinstantaneous-trip feature of the SiemensETI motor circuit protector provides for atrip setting slightly above the peakmotor-inrush current. With this setting,no delay is introduced in opening thecircuit when a fault occurs. This circuitbreaker has no time-delay trip element.Therefore it must be used in conjunctionwith, and immediately ahead of, themotor-running overcurrent protectivedevice.Important: The information below doesnot apply to all motor applications: itis recommended that the user refer tothe National Electrical Code (NEC) forspecific needs.Table 1 (When Breaker is Mounted Immediately Ahead of Motor Starter)3-Phase Induction Type Motors (Siemens ETI motor circuit protectors for branch circuit use with alternating-current combination, full voltage motor starters).MotorETI Trip SettingFull Load Catalog Adjust-Amperes Number ment Amperes.20 – .33 Low 2.6.34 – .45 2 4.5.46 – .56 ED63A001 3 6.57 – .68 CED63A001 4 7.5.69 – .81 High 9.53 – .83 Low 7.84 – 1.14 2 111.15 – 1.45 ED63A002 3 151.46 – 1.68 CED63A002 4 191.69 – 2.00 High 22.76 – 1.29 Low 101.30 – 1.75 2 171.76 – 2.29 ED63A003 3 232.30 – 2.68 CED63A003 4 302.69 – 3.18 High 351.23 – 1.99 Low 162.00 – 2.75 2 262.76 – 3.52 ED63A005 3 363.53 – 4.14 CED63A005 4 464.15 – 4.90 High 542.30 – 3.83 Low 303.84 – 5.37 2 505.38 – 6.52 ED63A010 3 706.53 – 7.68 CED63A010 4 857.69 – 9.10 High 1004.23 – 6.91 Low 556.92 – 9.61 2 909.62 – 11.91 ED63A025 3 12511.92 – 13.83 CED63A025 4 15513.84 – 16.40 High 1806.15 – 10.37 Low 8010.38 – 14.22 2 13514.23 – 18.06 ED63A030 3 18518.07 – 20.75 CED63A030 4 23520.76 – 24.50 High 2708.84 – 14.22 Low 11514.23 – 19.60 2 18519.61 – 24.99 ED63A040 3 25525.00 – 28.83 CED63A040 4 32528.84 – 34.00 High 37513.84 – 23.06 Low 18023.07 – 31.52 2 30031.53 – 39.99 ED63A050 3 41040.00 – 46.14 CED63A050 4 52046.15 – 54.50 High 60024.23 – 41.52 Low 31541.53 – 56.91 2 54056.92 – 68.45 ED63A100 3 74068.46 – 76.91 CED63A100 4 89076.92 – 90.90 High 1000ETI Trip SettingMotor Full Catalog Adjust-Load Amperes Number ment Amperes38.46– 55.37 Low 50055.38– 70.75 2 72070.76– 84.60 ED63A125 3 92084.61– 96.14 CED63A125 4 110096.15– 113.60 High 125030.76– 35.37 Low 40035.38– 39.99 2 46044.51– 49.23 FXD63L150 4 58053.84– 58.45 CFD63L150 6 70058.46– 63.06 7 76063.07– 74.50 High 82061.53– 69.22 Low 80069.23– 76.91 2 90084.61– 92.29 FXD63A150 4 1100100.00– 108.00 CFD63A150 6 1300108.00– 115.00 7 1400115.00– 136.00 High 150085.00– 100.00 Low 1100100.00– 115.00 2 1300131.00– 146.00 FXD63A250 4 1700162.00– 177.00 CFD63A250 6 2100177.00– 192.00 7 2300192.00– 227.00 High 250095.00– 110.00 Low 1250110.00– 124.00 2 1430138.00– 151.00 JXD63L400 4 1790165.00– 178.00 CJD63L400 6 2140178.00– 192.00 7 2320192.00– 227.00 High 2500154.00– 176.00 Low 2000176.00– 198.00 2 2290220.00– 242.00 JXD63H400 4 2860264.00– 285.00 CJD63H400 6 3430285.00– 308.00 7 3710308.00– 326.00 High 4000155.00– 176.00 Low 2000176.00– 198.00 2 2290220.00– 242.00 LXD63L600 4 2860264.00– 285.00 CLD63L600 6 3430285.00– 308.00 7 3710308.00– 326.00 High 4000ETI Trip SettingMotor Full Catalog Adjust-Load Amperes Number ment Amperes231.00 – 264.00 Low 3000264.00 – 292.00 2 3430330.00 – 362.00 LXD63H600 4 4290395.00 – 428.00 CLD63H600 6 5140428.99 – 462.00 7 5570462.00 – 490.00 High 6000215.00 – 238.00 Low 2800238.00 – 261.00 2 3100261.00 – 284.00 3 3400308.00 – 369.00 LMXD63L800 5 4000369.00 – 423.00 6 4800423.00 – 462.00 7 5500462.00 – 490.00 High 6000246.00 – 269.00 Low 3200269.00 – 284.00 2 3500284.00 – 323.00 3 3700362.00 – 492.00 LMXD63A800 5 4700492.00 – 562.00 6 6400562.00 – 616.00 7 7300616.00 – 660.00 High 8000231.00 – 264.00 Low 3000264.00 – 292.00 2 3430292.00 – 330.00 3 3800362.00 – 395.00 MXD63L800 5 4710428.00 – 462.00 CMD63L800 7 5570462.00 – 490.00 High 6000308.00 – 352.00 Low 4000352.00 – 442.00 2 4570442.00 – 447.00 3 5740483.00 – 527.00 MXD63A800 5 6280571.00 – 616.00 CMD63A800 7 7240616.00 – 660.00 High 8000385.00 – 440.00 Low 5000495.00 – 550.00 MXD63H800 3 6430605.00 – 660.00 CMD63H800 5 7860660.00 – 695.00 6 85756MOLDED CASECIRCUIT BREAKERSNote: Low instantaneous settings have a + 20% tolerance and highsettings have a + 20% toleranceSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-67

Molded Case Circuit BreakersMotor CircuitsBreaker Mounted at a Distance FromMotor StarterET thermal-magnetic circuit breakersconform to the National Electrical Codetable 430-152 requirements for motorbranch and feeder circuit protectionwhen properly applied in conjunction withmotor-running overcurrent protectivedevices. The recommendedcircuit-breaker ratings in Table 2 provideadequate time delay for starting themajority of three phase induction motors.To determine the ampere ratings of the ETbreaker to protect a motor feeder, add therating of the ET breaker used to protectthe largest motor branch circuit in thegroup to the full-load currents of theremaining motors in the group.ApplicationInterrupt RatingsFor normal commercial purposes,available fault current can convenientlybe obtained in the InterruptingSelector Tables.Table 2 (When Breaker is Mounted at a Distance From Motor Starter)3-Phase Induction Type Motors (EQ and ET circuit breakers (thermal-magnetic trip) for branch breaker use with alternating-current combination motor starters).6MOLDED CASECIRCUIT BREAKERS200 and 208V Motors 230V Motors 460V Motors 575V MotorsMotor 240V Circuit Breaker DataHorse-240V Circuit Breaker Data 480V Circuit Breaker Data 600V Circuit Breaker Data power Breaker Catalog Ampere Breaker Catalog Ampere Breaker Catalog Ampere Breaker Catalog AmpereRating Type Number Rating Type Number Rating Type Number Rating Type Number Rating000 1 ⁄2 BQ3B015 015 BQ3B015 015 ED43B015 015 ED63B015 015000 3 ⁄4 BQ3B015 015 BQ3B015 015 ED43B015 015 ED63B015 015001BQ BQ3B015 015 BQ BQ3B015 015 ED4ED43B015 015ED6ED63B015 015001 1 ⁄2 BQ3B015 015 BQ3B015 015 ED43B015 015 ED63B015 015002 BQ3B020 020 BQ3B015 015 ED43B015 015 ED63B015 015003 BQ3B030 030 BQ3B020 020 ED43B015 015 ED63B015 015005 BQ3B040 040 BQ3B030 030 ED43B015 015 ED63B015 015007 1 ⁄2 BQ3B060 060 BQ3B050 050 ED43B030 030 ED63B020 020010 BQ BQ3B070 070 BQ BQ3B070 070 ED4 ED43B030 030 ED6 ED63B030 030015 BQ3B100 100 BQ3B090 090 ED43B040 040 ED63B035 035020 BQ3B100 100 ED43B050 050 ED63B050 050025 FXD63B125 125 FXD63B125 125 FXD63B090 090 FXD63B060 060030 FXD63B150 150 FXD63B150 150 FXD63B100 100FXD6FXD63B070 070040 FXD6 FXD63B175 175 FXD6 FXD63B175 175 FXD6 FXD63B125 125 FXD63B090 090050 FXD63B200 200 FXD63B200 200 FXD63B150 150 FDX63B100 100FXD63B225 225060 JXD2 JXD23B300 300 — — — FXD6, FD6 FXD63B150 150 FXD6 FXD63B100 100075 JXD2 JXD23B400 400 JXD2 JXD23B350 350 FXD6, FD6 FXD63B200 200 FXD6, FD6 FXD63B125 125100 JXD2 JXD23B400 400 JXD2 JXD23B400 400FD6 FD63B250 250JD6 JD63B250 250FXD6, FD6 FD63B175 175125LD6 or LD63B600600LD6 or LD63B500 or500 JD6 JD63B300 300FXD6, FD6 FXD63B200 200LMD6 LMD63B600 LMD6 LMD63B500 OR JD6 JD63B200 200150LD6 or LD63B600 or600 LMD6LD63B600 or600 JD6 JD63B300 300FXD6 or FXD63B225 225LMD6 LMD63B600 LMD63B600 JD6 JD63B225 225200 LMD6 LMD63B800 800 LMD6 LMD63B800 800 JD6 JD63B350 350 JD6 JD63B300 300250 — — — — — — JD6 JD63B400 400 JD6 JD63B400 400300 — — — — — —LD6 or LD63B600 orLMD6 LMD63B600600 JD6 JD63B400 400350 — — — — — — LMD6 LMD63B700 700LD6 orLMD6LD63B500 orLMD63B500500400 — — — — — — LMD6 LMD63B800 800LD6 or LD63B600 orLMD6 LMD63B600600500 — — — — — — — — — LMD6 LMD63B800 800 The selection of breakers for this table is in accordance withArticle 430, 2005 National Electric Code. Recommendedcircuit breakers are for full voltage starting, specialconsideration is necessary for reduced voltage starting. For panelboard applications, substitute the BL breaker forthe BQ, ED2 circuit breakers may also be used. For non-interchangeable trip applications, substitute theFXD6 for the FD6, the JXD6 for the JD6, or the LXD6 forthe LD6.6-68Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersAdjustable Installments Magnetic Trip SettingsApplicationMaximum Nominal ETI Motor Circuit Protector Thermal MagneticBreaker Continuous AC Adjustable Trip Range Catalog Number Catalog NumberType Amperes Low 2 3 4 5 6 7 High 3-Pole 2-Pole 3-Pole1 2.6 4.5 6 7.5 — — — 9 ED63A001 — —2 7 11 15 19 — — — 22 ED63A002 — —3 10 17 23 30 — — — 35 ED63A003 — —5 16 26 36 46 — — — 54 ED63A005 — —10 30 50 70 85 — — — 100 ED63A010 — —ED6 25 55 90 125 155 — — — 180 ED63A025 — —30 80 135 185 235 — — — 270 ED63A030 — —40 115 185 255 325 — — — 375 ED63A040 — —50 180 300 410 520 — — — 600 ED63A050 — —100 315 540 740 890 — — — 1000 ED63A100 — —125 500 720 920 1100 — — — 1250 ED63A125 — —1 2.6 4.5 6 7.5 — — — 9 CED63A001■ — —2 7 11 15 19 — — — 22 CED63A002■ — —3 10 17 23 30 — — — 35 CED63A003■ — —5 16 26 36 46 — — — 54 CED63A005■ — —10 30 50 70 85 — — — 100 CED63A010■ — —CED6 25 55 90 125 155 — — — 180 CED63A025■ — —30 80 135 185 235 — — — 270 CED63A030■ — —40 115 185 255 325 — — — 375 CED63A040■ — —50 180 300 410 520 — — — 600 CED63A050 — —100 315 540 740 890 — — — 1000 CED63A100 — —125 500 720 920 1100 — — — 1250 CED63A125 — —70 600 640 690 730 770 810 850 900 — FXD62B070 FXD63B07080 600 640 690 730 770 810 850 900 — FXD62B080 FXD63B08090 600 640 690 730 770 810 850 900 — FXD62B090 FXD63B090100 700 770 840 920 990 1060 1140 1200 — FXD62B100 FXD63B100110 700 770 840 920 990 1060 1140 1200 — FXD62B110 FXD63B110125 800 900 1000 1100 1200 1300 1400 1500 — FXD62B125 FXD63B125FXD6-A150 400 460 520 580 640 700 760 820 FXD63L150 — —150 800 900 1000 1100 1200 1300 1400 1500 FXD63A150 FXD62B150 FXD63B150150 1100 1300 1500 1700 1900 2100 2300 2500 FXD63H150 — —175 900 1060 1210 1370 1520 1780 1930 2000 — FXD62B175 FXD63B175200 900 1060 1210 1370 1520 1780 1930 2000 — FXD62B200 FXD63B200225 1100 1300 1500 1700 1900 2100 2300 2500 — FXD62B225 FXD63B225250 1100 1300 1500 1700 1900 2100 2300 2500 FXD63A250 FXD62B250 FXD63B25070 600 640 690 730 770 810 850 900 — FD62B070 FD63B07080 600 640 690 730 770 810 850 900 — FD62B080 FD63B08090 600 640 690 730 770 810 850 900 — FD62B090 FD63B090100 700 770 840 920 990 1060 1140 1200 — FD62B100 FD63B100110 700 770 840 920 990 1060 1140 1200 — FD62B110 FD63B110FD6-A 125 800 900 1000 1100 1200 1300 1400 1500 — FD62B125 FD63B125150 800 900 1000 1100 1200 1300 1400 1500 — FD62B150 FD63B150175 900 1060 1210 1370 1520 1780 1930 2000 — FD62B175 FD63B175200 900 1060 1210 1370 1520 1780 1930 2000 — FD62B200 FD63B200225 1100 1300 1500 1700 1900 2100 2300 2500 — FD62B225 FD63B225250 1100 1300 1500 1700 1900 2100 2300 2500 — FD62B250 FD63B25070 600 640 690 730 770 810 850 900 — HFD62B070 HFD63B07080 600 640 690 730 770 810 850 900 — HFD62B080 HFD63B08090 600 640 690 730 770 810 850 900 — HFD62B090 HFD63B090100 700 770 840 920 990 1060 1140 1200 — HFD62B100 HFD63B100110 700 770 840 920 990 1060 1140 1200 — HFD62B110 HFD63B110HFD6 125 800 900 1000 1100 1200 1300 1400 1500 — HFD62B125 HFD63B125150 800 900 1000 1100 1200 1300 1400 1500 — HFD62B150 HFD63B150175 900 1060 1210 1370 1520 1780 1930 2000 — HFD62B175 HFD63B175200 900 1060 1210 1370 1520 1780 1930 2000 — HFD62B200 HFD63B200225 1100 1300 1500 1700 1900 2100 2300 2500 — HFD62B225 HFD63B225250 1100 1300 1500 1700 1900 2100 2300 2500 — HFD62B250 HFD63B25070 600 640 690 730 770 810 850 900 — — HHFD63B07080 600 640 690 730 770 810 850 900 — — HHFD63B08090 600 640 690 730 770 810 850 900 — — HHFD63B090100 700 770 840 920 990 1060 1140 1200 — — HHFD63B100110 700 770 840 920 990 1060 1140 1200 — — HHFD63B110HHFD6 125 800 900 1000 1100 1200 1300 1400 1500 — — HHFD63B125150 800 900 1000 1100 1200 1300 1400 1500 — — HHFD63B150175 900 1060 1210 1370 1520 1780 1930 2000 — — HHFD63B175200 900 1060 1210 1370 1520 1780 1930 2000 — — HHFD63B200225 1100 1300 1500 1700 1900 2100 2300 2500 — — HHFD63B225250 1100 1300 1500 1700 1900 2100 2300 2500 — — HHFD63B25070 600 640 690 730 770 810 850 900 — CFD62B070 CFD63B07080 600 640 690 730 770 810 850 900 — CFD62B080 CFD63B08090 600 640 690 730 770 810 850 900 — CFD62B090 CFD63B090100 700 770 840 920 990 1060 1140 1200 — CFD62B100 CFD63B100110 700 770 840 920 990 1060 1140 1200 — CFD62B110 CFD63B110125 800 900 1000 1100 1200 1300 1400 1500 — CFD62B125 CFD63B125CFD6 150 400 460 520 580 640 700 760 820 CFD63L150 — —150 800 900 1000 1100 1200 1300 1400 1500 CFD63A150 CFD62B150 CFD63B150150 1100 1300 1500 1700 1900 2100 2300 2500 CFD63H150 — —175 900 1060 1210 1370 1520 1780 1930 2000 — CFD62B175 CFD63B175200 900 1060 1210 1370 1520 1780 1930 2000 — CFD62B200 CFD63B200225 1100 1300 1500 1700 1900 2100 2300 2500 — CFD62B225 CFD63B225250 1100 1300 1500 1700 1900 2100 2300 2500 CFD63A250 CFD62B250 CFD63B2506MOLDED CASECIRCUIT BREAKERSNote: Tolerances for instantaneous trip points meet UL 489(7.3). Nominal AC instantaneous trip points are givenin the tables. For DC instantaneous trip points, add 15%to nominal values.Instantaneous trip adjustment is made through thebreaker cover on all frame breakers. To change instantaneoustrip point on circuit breaker, depress indicatingknob, then rotate to desired position.■ Built to order. Allow 2–3 weeks for delivery.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-69

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersAdjustable Instantaneous Magnetic Trip SettingsApplicationMaximum Nominal ETI Motor Circuit Protector Thermal MagneticBreaker Continuous AC Adjustable Trip Range Catalog Number Catalog NumberType Amperes Low 2 3 4 5 6 7 High 3-Pole 2-Pole 3-Pole200 1250 1430 1610 1790 1960 2140 2320 2500 — JXD22B200 JXD23B200225 1250 1430 1610 1790 1960 2140 2320 2500 — JXD22B225 JXD23B225JXD2(A)250 1250 1430 1610 1790 1960 2140 2320 2500 — JXD22B250 JXD23B250300 1250 1430 1610 1790 1960 2140 2320 2500 — JXD22B300 JXD23B300350 2000 2290 2570 2860 3140 3430 3710 4000 — JXD22B350 JXD23B350400 2000 2290 2570 2860 3140 3430 3710 4000 — JXD22B400 JXD23B400200 1250 1430 1610 1790 1960 2140 2320 2500 — JXD62B200 JXD63B200JXD6(A)225 1250 1430 1610 1790 1960 2140 2320 2500 — JXD62B225 JXD63B225250 1250 1430 1610 1790 1960 2140 2320 2500 — JXD62B250 JXD63B250300 1250 1430 1610 1790 1960 2140 2320 2500 — JXD62B300 JXD62B300350 2000 2290 2570 2860 3140 3430 3710 4000 — JXD62B350 JXD23B350400 2000 2290 2570 2860 3140 3430 3710 4000 — JXD62B400 JXD23B400200 1250 1430 1610 1790 1960 2140 2320 2500 — JD62B200 JD63B200225 1250 1430 1610 1790 1960 2140 2320 2500 — JD62B225 JD63B225250 1250 1430 1610 1790 1960 2140 2320 2500 — JD62B250 JD63B250JD6(A) 300 1250 1430 1610 1790 1960 2140 2320 2500 — JD62B300 JD63B300350 2000 2290 2570 2860 3140 3430 3710 4000 — JD62B350 JD63B350400 1250 1430 1610 1790 1960 2140 2320 2500 JXD63L400 — —400 2000 2290 2570 2860 3140 3430 3710 4000 JXD63H400 JD62B400 JD63B400200 1250 1430 1610 1790 1960 2140 2320 2500 — HJD62B200 HJD63B200225 1250 1430 1610 1790 1960 2140 2320 2500 — HJD62B225 HJD63B225HJD6(A)250 1250 1430 1610 1790 1960 2140 2320 2500 — HJD62B250 HJD63H250300 1250 1430 1610 1790 1960 2140 2320 2500 — HJD62B300 HJD63B300350 2000 2290 2570 2860 3140 3430 3710 4000 — HJD62B350 HJD63B350400 2000 2290 2570 2860 3140 3430 3710 4000 — HJD62H400 HJD63B400200 1250 1430 1610 1790 1960 2140 2320 2500 — HHJD62B200 HHJD63B200225 1250 1430 1610 1790 1960 2140 2320 2500 — HHJD62B225 HHJD63B225250 1250 1430 1610 1790 1960 2140 2320 2500 — HHJD62B250 HHJD63B250HHJD6300 1250 1430 1610 1790 1960 2140 2320 2500 — HHJD62B300 HHJD63B300350 2000 2290 2570 2860 3140 3430 3710 4000 — HHJD62B350 HHJD63B350400 2000 2290 2570 2860 3140 3430 3710 4000 — HHJD62B400 HHJD63B400200 1250 1430 1610 1790 1960 2140 2320 2500 — — CJD63B200225 1250 1430 1610 1790 1960 2140 2320 2500 — — CJD63B225250 1250 1430 1610 1790 1960 2140 2320 2500 — — CJD63B250CJD6 300 1250 1430 1610 1790 1960 2140 2320 2500 — — CJD63B300350 2000 2290 2570 2860 3140 3430 3710 4000 — — CJD63B350400 2000 2290 2570 2860 3140 3430 3710 4000 CJD63H400 — CHD63B400400 1250 1450 1610 1790 1960 2140 2320 2500 CJD63L400 — —450 2000 2290 2570 2860 3140 3430 3710 4000 — LXD62B450 LXD63B450LXD6(A) 500 3000 3430 3860 4290 4710 5140 5570 6000 — LXD62B500 LXD63B500600 3000 3430 3860 4290 4710 5140 5570 6000 — LXD62B600 LXD63B600250 1250 1430 1610 1790 1960 2140 2320 2500 — LD62B250 LD63B250300 1250 1430 1610 1790 1960 2140 2320 2500 — LD62B300 LD63B300350 2000 2290 2570 2860 3140 3430 3710 4000 — LD62B350 LD63B350LD6(A) 400 2000 2290 2570 2860 3140 3430 3710 4000 — LD62B400 LD63B400450 2000 2290 2570 2860 3140 3430 3710 4000 — LD62B450 LD63B450500 3000 3430 3800 4290 4710 5140 5570 6000 — LD62B500 LD63B500600 2000 2290 2570 2860 3140 3430 3710 4000 LXD63L600 — —600 3000 3430 3800 4290 4710 5140 5570 6000 LXD63H600 LD62B600 LD63B600250 1250 1430 1610 1790 1960 2140 2320 2500 — HLD62B250 HLD63B250300 1250 1430 1610 1790 1960 2140 2320 2500 — HLD62B300 HLD63B300350 2000 2290 2570 2860 3140 3430 3710 4000 — HLD62B350 HLD63B350HLD6(A) 400 2000 2290 2570 2860 3140 3430 3710 4000 — HLD62B400 HLD63B400450 2000 2290 2570 2860 3140 3430 3710 4000 — HLD62B450 HLD63B450500 3000 3430 3860 4290 4710 5140 5570 6000 — HLD62B500 HLD63B500600 3000 3430 3860 4290 4710 5140 5570 6000 — HLD62B600 HLD63B600250 1250 1430 1610 1790 1960 2140 2320 2500 — HHLD62B250 HHLD63B250300 1250 1430 1610 1790 1960 2140 2320 2500 — HHLD62B300 HHLD63B300350 2000 2290 2570 2860 3140 3430 3710 4000 — HHLD62B350 HHLD63B350HHLD6 400 2000 2290 2570 2860 3140 3430 3710 4000 — HHLD62B400 HHLD63B400450 2000 2290 2570 2860 3140 3430 3710 4000 — HHLD62B450 HHLD63B450500 3000 3430 3860 4290 4710 5140 5570 6000 — HHLD62B500 HHLD63B500600 3000 3430 3860 4290 4710 5140 5570 6000 — HHLD62B600 HHLD63B600250 1250 1430 1610 1790 1960 2140 2320 2500 — — CLD63B250300 1250 1430 1610 1790 1960 2140 2320 2500 — — CLD63B300350 2000 2290 2570 2860 3140 3430 3710 4000 — — CLD63B359CLD6400 2000 2290 2570 2860 3140 3430 3710 4000 — — CLD63B400450 2000 2290 2570 2860 3140 3430 3710 4000 — — CLD63B450500 3000 3430 3860 4290 4710 5140 5570 6000 — — CLD63B500600 2000 2290 2570 2860 3140 3430 3710 4000 CLD63L600 — —600 3000 3430 3860 4290 4710 5140 5570 6000 CLD63H600 — CLD63B600500 3000 3430 3860 4290 4710 5140 5570 6000 — — LMXD63B500600 3000 3430 3860 4290 4710 5140 5570 6000 — LMXD62B600 LMXD63B600LMXD6 700 3200 3500 3700 4200 4700 6400 7300 8000 — LMXD62B700 LMXD63B700800 2800 3100 3400 3700 4000 4800 5500 6000 LMXD63L800 — —800 3200 3500 3700 4200 4700 6400 7300 8000 LMXD63A800 LMXD62B800 LMXD63B800LMD6500 3000 3430 3860 4290 4710 5140 5570 6000 — LMD62B500 LMD63B500600 3000 3430 3860 4290 4710 5140 5570 6000 — LMD62B600 LMD63B600700 3200 3500 3700 4200 4700 6400 7300 8000 — LMD62B700 LMD63B700800 3200 3500 3700 4200 4700 6400 7300 8000 — LMD62B800 LMD63B8006-70Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersAdjustable Instantaneous Magnetic Trip SettingsApplicationMaximum Nominal ETI Motor Circuit Protector Thermal MagneticBreaker Continuous AC Adjustable Trip Range Catalog Number Catalog NumberType Amperes Low 2 3 4 5 6 7 High 3-Pole 2-Pole 3-Pole500 3000 3430 3860 4290 4710 5140 5570 6000 — — HLMXD63B500HLMXD6600 3000 3430 3860 4290 4710 5140 5570 6000 — — HLMXD63B600700 3200 3500 3700 4200 4700 6400 7300 8000 — — HLMXD63B700800 3200 3500 3700 4200 4700 6400 7300 8000 — — HLMXD63B800500 3000 3430 3860 4290 4710 5140 5570 6000 — HLMD62B500 HLMD63B500HLMD6600 3000 3430 3860 4290 4710 5140 5570 6000 — HLMD62B600 HLMD63B600700 3200 3500 3700 4200 4700 6400 7300 8000 — HLMD62B700 HLMD63B700800 3200 3500 3700 4200 4700 6400 7300 8000 — HLMD62B800 HLMD63B800500 3000 3430 3860 4290 4710 5140 5570 6000 — MD62B500 MD63B500600 3000 3430 3860 4290 4710 5140 5570 6000 — MD62B600 MD63B600MD6700 4000 4570 5140 5710 6280 6850 7420 8000 — MD62B700 MD63B700800 3000 3430 3860 4280 4710 5140 5570 6000 MXD63L800 — —800 4000 4570 5140 5710 6280 6850 7420 8000 MXD63A800 MD62B800 MD63B800800 5000 5715 6430 7145 7860 8575 9290 10000 MXD63H800 — —500 3000 3430 3860 4280 4710 5140 5570 6000 — MXD62B500 MXD63B500600 3000 3430 3860 4280 4710 5140 5570 6000 — MXD62B600 MXD63B600MXD6700 4000 4570 5140 5710 6280 6850 7420 8000 — MXD62B700 MXD63B700800 3000 3430 3860 4280 4710 5140 5570 6000 MXD63L800 — —800 4000 4570 5140 5710 6280 6850 7420 8000 MXD63A800 MXD62B800 MXD63B800800 5000 5715 6430 7145 7860 8575 9290 10000 MXD63H800 — —500 3000 3430 3860 4280 4710 5140 5570 6000 — HMD62B500 HMD63B500HMD6600 3000 3430 3860 4280 4710 5140 5570 6000 — HMD62B500 HMD63B600700 4000 4570 5140 5710 6280 6850 7420 8000 — HMD62B700 HMD63B700800 4000 4570 5140 5710 6280 6850 7420 8000 — HMD62B800 HMD63B800500 3000 3430 3860 4280 4710 5140 5570 6000 — — HMXD63B500HMXD6600 3000 3430 3860 4280 4710 5140 5570 6000 — — HMXD63B600700 4000 4570 5140 5710 6280 6850 7420 8000 — — HMXD63B700800 4000 4570 5140 5710 6280 6850 7420 8000 — — HMXD63B800400 3000 3430 3860 4280 4710 5140 5570 6000 — — CMD63B400500 3000 3430 3860 4280 4710 5140 5570 6000 — — CMD63B500600 3000 3430 3860 4280 4710 5140 5570 6000 — — CMD63B600CMD6 700 4000 4570 5140 5710 6280 6850 7420 8000 — — CMD63B700800 3000 3430 3860 4280 4710 5140 5570 6000 CMD63L800 — —800 4000 4570 5140 5710 6280 6850 7420 8000 CMD63A800 — CMD63B800800 5000 5715 6430 7145 7860 8575 9290 10000 CMD63H800 — —800 4000 4570 5140 5710 6280 6850 7420 8000 — ND62B800 ND63B800ND6900 5000 5715 6430 7145 7860 8575 9290 10000 — ND62B900 ND63B9001000 5000 5715 6430 7145 7860 8575 9290 10000 — ND62B100 ND63B1001200 5000 5715 6430 7145 7860 8575 9290 10000 — ND62B120 ND63B120900 5000 5715 6430 7145 7860 8575 9290 10000 — NXD62B900 NXD63B900NXD6 1000 5000 5715 6430 7145 7860 8575 9290 10000 — NXD62B100 NXD63B1001200 5000 5715 6430 7145 7860 8575 9290 10000 — NXD62B120 NXD63B120800 4000 4570 5140 5710 6280 6850 7420 8000 — HND62B800 HND63B800HND6900 5000 5715 6430 7145 7860 8575 9290 10000 — HND62B900 HND63B9001000 5000 5715 6430 7145 7860 8575 9290 10000 — HND62B100 HND63B1001200 5000 5715 6430 7145 7860 8575 9290 10000 — HND62B120 HND63B120900 5000 5715 6430 7145 7860 8575 9290 10000 — — HNXD63B900HNXD6 1000 5000 5715 6430 7145 7860 8575 9290 10000 — — HNXD63B1001200 5000 5715 6430 7145 7860 8575 9290 10000 — — HNXD63B120800 4000 4570 5140 5710 6280 6850 7420 8000 — — CND63B800CND6900 5000 5715 6430 7145 7860 8575 9290 10000 — — CND63B9001000 5000 5715 6430 7145 7860 8575 9290 10000 — — CND63B1001200 5000 5715 6430 7145 7860 8575 9290 10000 — — CND63B1201200 5000 5715 6430 7145 7860 8575 9290 10000 — — PD63B120PD6 1400 5000 5715 6430 7145 7860 8575 9290 10000 — — PD63B1401600 5000 5715 6430 7145 7860 8575 9290 10000 — — PD63B1601200 5000 5715 6430 7145 7860 8575 9290 10000 — — PXD63B120PXD6 1400 5000 5715 6430 7145 7860 8575 9290 10000 — — PXD63B1401600 5000 5715 6430 7145 7860 8575 9290 10000 — — PXD63B1601200 5000 5715 6430 7145 7860 8575 9290 10000 — — HPD63B120HPD6 1400 5000 5715 6430 7145 7860 8575 9290 10000 — — HPD63B1401600 5000 5715 6430 7145 7860 8575 9290 10000 — — HPD63B1601200 5000 5715 6430 7145 7860 8575 9290 10000 — — HPXD63B120HPXD6 1400 5000 5715 6430 7145 7860 8575 9290 10000 — — HPXD63B1401600 5000 5715 6430 7145 7860 8575 9290 10000 — — HPXD63B1601200 5000 5715 6430 7145 7860 8575 9290 10000 — — CPD63B120CPD6 1400 5000 5715 6430 7145 7860 8575 9290 10000 — — CPD63B1401600 5000 5715 6430 7145 7860 8575 9290 10000 — — CPD63B160RD61800 5000 5715 6430 7145 7860 8575 9290 10000 — — RD63B1802000 5000 5715 6430 7145 7860 8575 9290 10000 — — RD63B200RXD61800 5000 5715 6430 7145 7860 8575 9290 10000 — — RXD63B1802000 5000 5715 6430 7145 7860 8575 9290 10000 — — RXD63B200HRD61800 5000 5715 6430 7145 7860 8575 9290 10000 — — HRD63B1802000 5000 5715 6430 7145 7860 8575 9290 10000 — — HRD63B200HRXD61800 5000 5715 6430 7145 7860 8575 9290 10000 — — HRXD63B1802000 5000 5715 6430 7145 7860 8575 9290 10000 — — HRXD63B2006MOLDED CASECIRCUIT BREAKERSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-71

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersMolded Case Switch — Circuit DisconnectMaximum2-Pole3-PoleSelf-ProtectiveFrame Catalog List Catalog List InstantaneousAmp Rating Number Price $ Number Price $ Override±20% 1100BQ2S060■ 76.00 BQ3S060■ 351.00 11000BQ2S100■ 203.00 BQ3S100■ 351.00 110001125 ED22S100A■ 288.00 ED23S100A 488.00 11000ED42S100A■ 605.00 ED43S100A 742.00 11000ED42S125A■ 1157.00 ED43S125A 1495.00 11000ED62S100A■ 698.00 ED63S100A 895.00 11000— —— ED63S125A 1707.00 11000CED62S100A■ 2600.00 CED63S100A■ 3251.00 11000CED62S125A■ 3924.00 CED63S125A■ 4665.00 11000— — — HES3S100L 900.00 11250— — — HES3S125L 1962.00 112501225 QJ22S225A■ 306.00 QJ23S225A 991.00 120001250 FXD62S250A 1622.00 FXD63S250A 1966.00 13200HFXD62S250A■ 2823.00 HFXD63S250A■ 3422.00 13200— — CFD63S250A■ 6312.00 132001400 JXD22S400A■ 2050.00 JXD23S400A 2529.00 16000— — — JXD63S400A 3452.00 16000— — — HJXD63S400A■ 5824.00 16000— — CJD63S400A■ 7195.00 160001600 — — — LXD63S600A 4968.00 18000— — — HLXD63S600A■ 6644.00 18000— — CLD63S600A■ 11686.00 180001800 — — — LMXD63S800A■ 5708.00 10000— — — MXD63S800A 5708.00 10000— — CMD63S800A 13259.00 100001200 — — — NXD63S120A 10082.00 10000— — CND63S120A■ 18932.00 1000016002000Non Automatic Molded Case Switch20002500— — PXD63S160A 14902.00 10000— — RXD63S200A■ 16508.00 10000— — TD63S2000■ 21709.00 50kA— — TD63S2500■ 24441.00 50kA3200— — TD63S3200■ 26897.00 50kA4000-5000 See “SB” Type Insulated Case BreakersWithstand SelectionOrdering InformationOrder by catalog number. Switchesinclude frame and self protective(except TD) trip unit only. Order lugsseparately from pages 6-81 to 6-83.■ Built to order. Allow 2–3 weeks for delivery. For 2-pole application use outside poles of 3-pole circuitbreaker. For additional lugs see pages 6-81 to 6-83. Molded case switches up to R frame contain a selfprotecting instantaneous element, which may opencircuit above their override set point. UL file E57556 Volume 1, section 2 andCSA LR 42022-51. Requires mounting block MB9301 or MBR9302.Lugs pages 6-81 to 6-83Enclosures Section 5Accessories pages 6-86 to 6-916-72Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersDigital Solid State Sentron Sensitrip III SeriesThe Sentron Sensitrip III circuitbreaker is a true RMS current sensingdevice. Digital microprocessorcircuitry within the electronic trip unitprovides more precise control overthe circuit breaker functions. Thiscontrol allows circuit coordinationflexibility not available with thermalmagnetic circuit breakers.Functions available in Sentron Sensitrip circuit breakersLetter “A” is used for MD and ND Solid State frame types only.Typical Trip Unit Labeling and Adjustment Positions for the Sentron Sensitrip Circuit Breaker.TechnicalShortCont Long Instan- Short Short Time Ground GroundCatalog Number Trip Current Time taneous Time Time l 2 t Fault Fault(Description + Suffix) Type Setting Delay Setting Pick Up Delay Pick Up Pick Up DelayBasic Unit + (A) LI Basic Unit + (A)G LIG Basic Unit + (A)NT LSI Basic Unit + (A)NGT LSIG SMD6, SHMD6, SCMD6, SND6, SHND6, SCND6, SPD6, SHPD6SJD6, SHJD6, SCJD6, SCD6, SHLD6, SCLD66MOLDED CASECIRCUIT BREAKERSl n = Maximum circuit breaker ampererating.l r = Current Rating — a function ofcontinuous ampere adjustmentsetting expressed in % of l n .l g = Ground Fault Pickup — a functionof adjustment setting expressed in% of l n .Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-73

Molded Case Circuit BreakersDigital Solid State Sentron Sensitrip III SeriesTechnical6MOLDED CASECIRCUIT BREAKERSAdjustable “Ground Fault Pick-Up”SwitchSensitrip III circuit breakerscontaining the optional equipmentground fault protection cover theground fault pick-up range of 20% to70% of the circuit breaker framerating. The ground fault pick-upsettings also allow for one of threetime delays based on 12t curves.For 3-phase, 4-wire systems, anexternal neutral transformer isrequired with an ampere ratingequal to the trip unit ampere rating.l n = Maximum circuit breaker ampere rating.l r = Current Rating — a function of adjustment setting expressed in % of l n .l g = Ground Fault Pick-up — a function of adjustment setting expressed in % of l n .Examples of Adjustment SettingsCatalog Number SMD69800AA. Adjustable “ContinuousAmps” Rating SwitchAll Sensitrip III solid statemolded case circuit breakershave an adjustableampere rating switch.Adjustments made to thisswitch change thecontinuous current rating ofthe breaker from 20% to100% of its maximum tripunit rating depending onthe circuit breaker frame.B. Adjustable “Long TimeDelay” SwitchAll Sensitrip III circuitbreakers have anadjustable long time delayswitch to allow forselection of long timedelays of fixed timeintervals at six times thesetting of the adjustable“continuous amps”rating switch.C. Adjustable “InstantaneousPick-Up” SwitchSensitrip III circuit breakerswith an adjustableinstantaneous trip switchallow selection of a trippingpoint from related to theadjusted circuit breakerRating (l r ).Continuous Long Time InstantaneousI n = 800 Current Setting Delay Setting SettingI n = 800 amperes 30 12 8Results 240 amperes 12 seconds trip 1920 amperesl r = 30% of 800 at 6 x 240 amps = 1440. 8 x l r = 8 x 240D. Adjustable “Short TimePick-Up” Switch (Optional)Sensitrip III circuit breakerswith an adjustable short timepick-up switch allow forselection of short timepick-up in a range from 1.5to 10 times the setting of themaximum current rating.E. Adjustable “Short TimeDelay” Switch (Optional)Sensitrip III circuit breakerswith an adjustable short timepick-up switch also contain aswitch for adjustment intime delay. The adjustableshort time delay switchallows for either of twomodes of short time delays.One range of settingsenables the breaker to be setfor fixed time delays and theother range of settingsenables the breaker to be setfor short time delays basedon l 2 t curves.Catalog Number SMD69800ANGTLong Short Time Short Time Ground Groundl r Time Pick-Up Instantaneous Pick-Up Short Time l 2 T Fault Faultl n Setting Delay Off Setting On Delay Set Pick-Up Delay800 amperes 070 20 — 10 l r 8 l r .5 .28 40 .2Results 560 20 sec. — 5600A 4480A .5 secs .28 sec @ 4480A 320A .2 secA B C D E F G H I JA l n = 800 amperes.B l r = 560 amperes (70% of 800).C Delay = 20 seconds at 3360 amps (6 x l r ).Breaker will trip in 20 seconds with 3360amperes.D Short Time Pick-Up Off — Instantaneous can be used.E Instantaneous set at 10 x l r = 10 x 560 = 5600amperes.F Short Time Pick-Up On — Set at 8 = 8 x 560 = 4480amperes.G Short Time Delay = .5 seconds. (Definite Time)Note: G & H are mutually exclusive.H l 2 t switch on .28 seconds @ 6 x 560 = 3360 amperes.(Inverse time)I Ground Fault Pick-Up set at 40 = 40% of l n = 320amperes. (Definite Time)J Ground Fault Delay set at .2 seconds. Breaker will trip in200 milliseconds with a 400 ampere ground fault.6-74Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

WL Power Circuit Breakers — Insulated Case3-pole, up to 5000ABreaker DescriptionThe ever-increasing use of plant andenergy management systems hasintensified the demand for circuitbreakers supporting multiple openprotocols to monitor and control the flowof energy in the power system. Theextensive and modular WL family ofcircuit breakers and accessories providesthis for applications from 200A to 5000A.ApplicationsWL breakers can be applied as main, tie,feeder or distribution breakers inlow-voltage electrical power systems.Versions▪ Frame ratings: 800A to5000A▪ 3 physical frame sizes▪ Rated nominal operating voltage upto 600VAC▪ Seven interrupting classes from 50kAto 200kA at 480V▪ Circuit breaker or non-automatic switch▪ WL Circuit Breakers aredelivered ascomplete assembled breakers orindividual frames, guide frames, andaccessoriesInstallation TypesFixed-mounted or Draw-out version.Standards▪ WL ANSI / UL 1066 Circuit Breakerswill satisfy: C37.13, C37.16, C37.17,C37.50, NEMA SG3▪ WL UL 489 Circuit Breakers willsatisfy: UL 489▪ WL Circuit Breakers are suitable foruse in UL 1558 LV Switchgear and UL891 LV SwitchboardsConditions of ApplicationWL Circuit Breakers are designed tomeet standard Industrial and Commercialapplication requirements.Uniform DimensionsWL Circuit Breaker dimensions differonly in the device width, which varies byframe size. With the exception of the200kA ANSI Frame Size II which has anadditional 5" in depth to accommodateintegral fuses and the UL489 Frame SizeI which measures only 15" in height toallow six-high stacking in switchboards.Minimal Space RequirementsThe WL design is extremely compactwithout sacrificing performance and doesnot use energy-wasting heat sinks.Trip UnitsThe electronic, micro processor-basedtrip unit is auxiliary voltage-independentfor all protective functions and enablesadaptation to the different protectionrequirements of distribution systems,motors, transformers and generators.Non-Automatic SwitchA special version of the circuit breaker isused as a non-automatic switch.The non-automatic switch is constructedwithout a trip unit and has no protectivefunction. A possible application is for useas a tie in systems with parallel feeds.Main Bus ConnectorsBreakers are equipped with standardvertical main bus connections. Horizontalbus connections are available as anoption in Frame Size 1 and 2 up to2000A.Communication CapabilityMODBUS or PROFIBUS communicationstransmit the acquired and metereddata, such as current values, breakerstatus, trip log, etc. to a centralmonitoring computer. When the optionalmetering function is installed, the WLacquires data useful for powermanagement and can contribute to asignificant savings in energy costs. Anew, internal circuit breaker bus enablesthe expansion of breaker functionalitythrough the integration of manysecondary functions which werepreviously separate, including:▪ Control of analog displays▪ Options for testing thecommunication setup▪ Display of breaker status and reasonfor trip▪ Input modules for reading otherexternal signals and transmittingthese signalsvia PROFIBUS orMODBUS communication▪ A selection of output modules toprovide contact closures based onevents or measured-value setpoints.It is not only possible to monitor thebreaker remotely, it is also possibleto open and close the breaker as wellas setting parameters remotelyOperating MechanismsCircuit breakers can be optionallydelivered with different operatingmechanisms, including:▪ Manual operating mechanism withmechanical closing (standard)General▪ Manual operating mechanism withmechanical and electricallyinterlocked closing▪ Motorized operating mechanism withmechanical and electrically interlockedclosing. Operating mechanisms withelectrically interlocked closing aresuitable for synchronizing tasksAuxiliary ContactsAuxiliary switches can be added accordingto the type of installation. They areeasily mounted via front, top mountedterminal blocks.ModularityCommon guide frames for the draw-outversion make them completely interchangeablebetween the UL 489 andANSI / UL 1066 rated circuit breakers.Components, such as auxiliary releases,motorized operating mechanisms, tripunits, current sensors, auxiliarysignal switches, automatic reset devicesor interlocks can be used to modify orretrofit any circuit breaker to meetchanging requirements. The main contactscan be replaced to extend the lifeof the circuit breaker and feature integratedcontact wear indicators.Electronic Trip Unit ModularityModularity is the outstanding feature ofthe new WL Circuit Breakers. The tripunits themselves can be retrofitted withspecial LCDs, ground fault modules,rating plugs and communicationmodules.100% Rated Circuit Breaker WLcircuit breakers are designed forcontinuous operation at 100% of theircurrent rating without the need forexternal heat sinks.Conditions of ApplicationWL Circuit Breakers are designed tomeet standard Industrial and Commercialapplication requirements.6MOLDED CASECIRCUIT BREAKERSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-75

6MOLDED CASECIRCUIT BREAKERSWL Power Circuit Breakers — Insulated CaseElectronic Trip UnitsSelection criteria for WL CircuitBreakersThe basic criteria for selecting circuitbreakers is:▪ Maximum Available Short Circuitat the installation point. This valuedetermines the short circuit currentinterrupting rating or short circuitcurrent withstand rating of the circuitbreaker▪ Rated Current In which is to flowthrough the respective circuit breakercontinuously. This value may not begreater than the maximum ratedcurrent of the circuit breaker. The ratedthe rating plug, up to the maximumframe rating▪ Ambient Temperature of the circuitbreaker. This is usually thetemperature inside the cubicle▪ Design of the circuit breaker.Protective Functions of the circuitbreaker. These are determined by theselection of the appropriate trip unitTrip Unit FunctionsGeneralBasic Protective Functions ETU725 ETU727Long-time overcurrent protection L ● ●Short-time delayed overcurrent protection S ● ●Instantaneous overcurrent protection I ● ●Neutral conductor protection N — ●Ground fault protection G — ●Additional FunctionsSelectable neutral protection — ●Defeatable short-time protection ● ●Defeatable instantaneous protection — —Selectable thermal memory — —Zone selective interlocking — —Selectable I2t or fixed short-time delay — — Adjustable instantaneous pick-up — —Selectable I2t or I4t long-time delay — —Adjustable short-time delay and pick-up ● ●Selectable and adjustable neutral protection — —Dual protective setting capability — —Dynamic arc-flash sentry — —Extended instantaneous protection ● ●Parameterization and DisplaysParameterization by rotary switches (10 steps) ● ●Parameterization by communication (absolute values) — —Parameterization by menu/keypad (absolute values) — —Remote parameterization of the basic functions — —Remote parameterization of the additional functions — —Alphanumeric LCD — —Graphical LCD — —Metering FunctionMetering function — —Metering function Plus — —CommunicationCubicleBUS — —Communication via PROFIBUS-DP — —Communication via the MODBUS — —Communication via the Ethernet (BDA) — —● Standard — Not available Optional Fixed, short-time delay only.6-76Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

WL Power Circuit Breakers — Insulated CaseElectronic Trip UnitsGeneralTrip Unit FunctionsBasic Protective Functions ETU745 ETU748 ETU755 ETU776Long-time overcurrent protection L ● ● ● ●Short-time delayed overcurrent protection S ● ● ● ●Instantaneous overcurrent protection I ● ● ● ●Neutral conductor protection N ● ● ● ●Ground fault protection G Additional FunctionsSelectable neutral protection ● ● ● ●Defeatable short-time protection ● — ● ●Defeatable instantaneous protection ● — ● ●Selectable thermal memory ● ● ● ●Zone selective interlocking ● ● ● ●Selectable I2t or fixed short-time delay ● ● ● ●Adjustable instantaneous pick-up ● — ● ●Selectable I2t or I4t long-time delay ● ● ● ●Adjustable short-time delay and pick-up ● ● ● ●Selectable and adjustable neutral protection ● ● ● ●Dual protective setting capability — — ● ●Dynamic arc-flash sentry — — ● ●Extended instantaneous protection ● ● ● ●Parameterization and DisplaysParameterization by rotary switches (10 steps) ● ● — —Parameterization by communication (absolute values) — ● ● ●Parameterization by menu/keypad (absolute values) — — — ●Remote parameterization of the basic functions — — ● ●Remote parameterization of the additional functions — — ● ●Alphanumeric LCD — —Graphical LCD — — — ●Metering Function6MOLDED CASECIRCUIT BREAKERSMetering function Metering function Plus CommunicationCubicleBUS ● ● ● ●Communication via PROFIBUS-DP Communication via the MODBUS Communication via the Ethernet (BDA) ● Standard — Not available OptionalSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-77

WL Power Circuit Breakers — Insulated Case3-Pole, up to 5000AGeneral6MOLDED CASECIRCUIT BREAKERSRating PlugIt is no longer necessary to replace thecurrent transformer to change the ratedcurrent of the breaker. Instead, yousimply replace the rating plug which iseasily accessible on the front of the tripunit. The circuit breaker is set to the newrated current quickly and is alreadycorrectly labeled.Long Time Overcurrent Protectionwith Switchable I2t/I4t CharacteristicsThe long time overcurrentprotection in the ETU745, ETU755 andETU776 trip units can be switchedbetween an I2t and I4t characteristic toimprove coordination between upstreamcircuit breakers and fuses.Front PanelThe front panel is designed so that it canbe accessed through a cutout in thedoor, which means that all controls anddisplays are accessible even when thecubicle door is closed. The front panelsof all Frame Size II and Frame Size IIIcircuit breakers are identical, and allowfor two different through-door accessdesigns: Trip unit and front panel controlsor front panel controls only. The degreeof protection of the front panel is IP 20.Environmental ProtectionThe plastics used are halogen-free andrecyclable.Safety and ReliabilityIn order to help protect the electricaldistribution system and circuit breakeragainst unauthorized breaker operations,Exclusive FeaturesGenerator/UtilityProtection Sets24/7/365 power availability is critical forsome systems. On-site generation capabilityis growing more and more commonin many systems. All of the WL digitalelectronic trip units allow the systemdesigner to precisely tailor trip settingsfor the most demanding requirements.However, the 755 and 776 trip unitsallow one set of trip settings for a fullyloaded utility feed and with a simple contactclosure, the trip unit toggles to asecond trip set tailored to provide optimalgenerator protection. The widerange of settings allows the WL to provideprotection for a minimal generatorcapacity for only essential loads, throughfull backup for an entire facility. This dualutility/generator protection capability in asingle circuit breaker allows the systemdesigner unparalleled, cost effective,flexibility.Dynamic Arc-Flash Sentry(Patent Pending)A unique feature of the WL trip unitallows the system designer to achievelower levels of arc flash energy anddelayed tripping for selective tripcoordination purposes.a wide range of locking devices can beinstalled or retrofit, including:▪ Lockable drawout version to protectagainst unauthorized removal(standard)▪ High degree of protection throughPlexiglas cover▪ Mechanical reclosing lockout afterlong-time, short-time or instantaneoustrip (optional)▪ Devices with trip unit ETU745 orhigher are equipped with temperaturesensors on the BSS andCOM15/COM16 (standard)▪ Lock provision for locking the breakerin the OPEN position▪ Lockable covers for the CLOSE button▪ Lockable racking handle preventsmoving the breaker▪ Lockable charging handle preventscharging the springsStandard Version FeaturesWL Circuit Breakers have the followingstandard equipment:▪ Mechanical CLOSE and mechanicalOPEN push buttons▪ Manual operating mechanism withmechanical closing▪ Contact position indicator▪ Front panel ready-to-close indicatorDynamic Arc-Flash Sentry (DAS) employsthe unique dual protective setting capabilityof the 755 and 776 trip units, coupledwith the ability to easily toggle to alower arc flash parameter set. A normaloperation parameter set can be optimizedfor selective trip coordination,while the second set is optimized forlower arc flash energy levels. Thedynamic action comes from the ability toswitch from the normal operation set tothe arc flash limiting set based on thepresence of personnel as they approachthe flash protection boundary. A widevariety of switching methods may beused based on the needs of a particularfacility. The capabilities range from fullyautomatic switching using appropriateoccupancy sensors to manual switchingvia a key operation.Extended Instantaneous Protection(Patent Pending)Extended Instantaneous protection (EIP),another unique feature of the WL tripunit, allows the system designer toachieve full selective trip coordination upto the short-time rating of the framewhile also allowing application of thebreaker up to the interrupting rating ofthe frame. The typical power circuit▪ Spring charge indicator▪ Rear vertical main contacts▪ Main contact replacement flag▪ Auxiliary plug system with bare wirepressure screw terminals. Deliveryincludes all auxiliary plugs necessary forboth factory installed and future fieldinstalled accessories▪ Mechanical trip indicator of theovercurrent release system▪ Automatic reset after trip▪ The front panel cannot be removed ifthe circuit breaker closed▪ Laminated main contact fingers as partof the breaker contact strip onthe drawout circuit breaker▪ Breaker position display in theoperator’s panel▪ Captive crank handle for racking outthe breaker▪ Guide frame with guide rails for easyhandling of draw-out version▪ Breaker cannot be moved in theCLOSED state▪ Rated current coding between theguide frame and the breaker▪ Suitable for reverse feed applications▪ The breaker is always equipped withthe required number of secondarydisconnect blocksbreaker with an 'LS' trip unit, or whenthe instantaneous function is switchedoff on an 'LSI' trip unit, can only beapplied up to it's short-time rating,commonly 85kA or less. For applicationon systems with levels of available faultcurrent above the short-time rating, thetypical 'LS' power circuit breaker cannotbe applied or must employ an instantaneousoverride. This instantaneousoverride is set at as much as 20% belowthe short-time rating and can seriouslycompromise selective trip coordinationwith downstream breakers.The WL, equipped with EIP, overcomesthese limitations by providing fullwithstand capability, and full coordination,with a minus 0% short-time bandtolerance up to 85kA on frame Size IIand 100kA on Size III. Above fault currentsof 20% higher than the full shorttimerating, the WL breaker is self-protecting,and the EIP function will trip thebreaker instantly to protect the frameand the system from these extremelyhigh currents, as high as 150kA on frameSize III. One added benefit is that arcflash energy is greatly reduced in thishigh current region due to the instantaneoustrip response that EIP provides.6-78Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersElectronic and Communications AccessoriesElectronic & Display DevicesLocal Display UnitBreaker Type Catalog Number List Price $SJD, SLD, SMD, SND, SPD, SB, STD LDU-100 1343.00SelectionSADU Ammeter Display UnitThe Local Display Unit (LDU) provides a centralized read-out of all Sensitrip III and SBICCB breakers. The device provides a panel mountable display for all trip unit dataincluding phase currents and alarms for up to 32 breakers. Also communicates withother ACCESS devices.Trip Unit Test SetType Catalog Number List Price $SJD, SLD, SMD, SND, SPD, SB, STD, Portable TS31 13835.00Spare TS-31 Test Set Interconnecting Cable TS31CABLE 188.00The TS-31 test set is used to test the operation of the fault protection functions of thecircuit breaker's trip unit, including long-time, short-time, instantaneous, and groundfault by means of secondary current injections.Sensitrip Ammeter Display UnitBreaker Type Catalog Number List Price $SJD, SLD, SMD SADU 1776.00SND, SPD SADURMK18 342.00The Sensitrip Ammeter Display Unit (SADU) provides real-time metering for allSentron-Sensitrip III Molded Case Circuit Breakers. The unit plugs directly onto thefront of the trip unit and provides displays for individual phase currents flowing throughthe breaker. Additional features include Average, Demand, Ground and UnbalanceCurrent displays, along with impending Trip Status. Current Metering Logs, and aunique diagnostic Trip Log that records the date, time and type of fault for theprevious five breaker trips. The device is UL and CSSA certified.The optional panel mount accessory (SADURMK18) allows easy device mountingexternal from the circuit breaker, in panelboard and switchboard spaces or gutters,with the flexibility of interior panel exterior panel, or wall mounting capability.The 2 x 16 alphanumeric LCD display provides easy viewing of data, such asviewing all three phase currents simultaneously.SADU Plug-in MountingSB Energy Display▪ Direct plug-in or Panel Mounting*▪ Trip Unit Powered & Battery back-up▪ 2 x 16 LCD Alphanumeric Display*▪ Ammeter Display Functions— RMS Phase Currents— Average Current*— Current Demand*— Ground Current— Current Unbalance (%)*▪ Breaker Status— Normal— Impending Trip*▪ Time Stamped Trip Log (last 5)— Time & Date*— Trip Cause: LT, ST, GF, SC▪ Max Log (with date & time)— Max Phase Current*— Max Average Current*— Max Ground Current*— Max Unbalance Current*— Max Current Demand** Unique Features6MOLDED CASECIRCUIT BREAKERSDiscount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-79

Molded Case Circuit BreakersCommunications AccessoriesSelectionMultiplexor TranslatorBreaker Type Features Catalog No List Price $SJD, SLD Zone Interlocking Only MTZ 1946.00SMD, SNDSPD, STD Full CommunicationsSBA, SBS, SBH with Zone InterlockingMTA 4334.00The Multiplexor Translator MTZ is an interface device required in zoneselective interlock schemes. The MTA combines the zone selectiveinterlocking function with interface to ACCESS ® Systems.Cables & ConnectorsRibbon CablesBreaker Type Length Catalog No List Price $SJD, SLDSMD, SNDSPD, STDSBA, SBS, SBH06" EPC06 59.0008" EPC08 59.0012" EPC12■ 79.0018" EPC18 96.0024" EPC24■ 124.006MOLDED CASECIRCUIT BREAKERSACCESS Communications Siemens electronic trip units feature two levels ofcommunication: Zone Selective Interlocking and ACCESSSystem Open-protocol communications. The trip units are fullyequipped for direct integration into ACCESS or compatiblecommunication systems.A multiplexor/Translator (MTA) and Expansion Plug area requiredfor the TYPE “TL” and Sensitrip trip units when full Accesscommunications is specified. The MTA also has Zone SelectiveInterlocking capability. Refer to Bulletin IPIM-2211A andInstruction Sheet Pc. No. 411152A00 for additional information.Siemens WinPM.net power monitoring software delivers apowerful energy management system providing sophisticatedmonitoring capability to a host computer and other componentsin the electrical distribution system at an affordable cost. It alsoprovides process control, including peak demand, trend analysis,waveform analysis, and harmonic calculations and displays.These functions help pinpoint energy consumption, power qualityissues, and the energy cost of any process. Outages and potentialoutages can be quickly diagnosed and plans can be generated forexpansion and preventative plant maintenance. Refer to BulletinsIPIM-2211A for additional information.Communications is accomplished via RS-485 twisted pair wire ormodem, providing communications to a remote site and allowingaccess to multiple plants. With integration of an AccessSiemens Power Interface (SPI), communication with Modbusnetworks is enabled. This part provides the ability to communicatedirectly to a PC with WinPM.net or any Modbus master.The SB-EC Trip Unit’s RS-232 communications port providesadditional PC communications for available trip unit data displaysand trip unit configuration via Siemens SBWin software.Telephone CablesBreaker Type Length Catalog No List Price $08' MTCSB08▲ 79.00SB 15' MTCSB15▲ 118.00STD 25' MTCSB25▲ 155.0050' MTCSB50▲ 155.00SJD, SLD 8' MTC08 79.00SMD, SND, 15' MTC15 118.00SPD, 25' MTC25 155.00SBA, SBS, SBH 50' MTC50 155.00The Expansion Plug EP is a required isolating device to connect the breakerwith the Multiplexor Translator. It is connected to the trip unit on thebreaker with a “Ribbon Cable”, EPC08 e.g., and the Multiplexor Translatorwith the “Telephone Cable” (an RJ-11 cable) MTCSB08 e.g.Expansion Plug Selection GuideBreaker Frame Mounting Catalog ListType Size Type Number Price $SB ICCB and 1200A, Fixed EPSBFMK ■ 219.00STD 2000A Draw out EPSBDMK ■ 219.00SB ICCB and 3200A, Fixed EPSB4FMK ■ 219.00STD 5000A Drawout EPSB4DMK ■ 219.00Sensitrip ALL ALL EP 209.00Component Selection Guide Trip Units and ApplicationComponent ZSI (only) Access ZSI (only) ACCESS ACCESSType with and/or with all and/or withSensitrip ZSI with SB-EC with SB-ECMCCB’S Sensitrip Trip Units SB-TL TripMCCB’s ACCESS Trip UnitsUnitsEP ✓ ✓EPSB ✓ ✓MTZ ✓ ✓ ✓MTA ✓ ✓EPC Cable ✓ ✓MTC Cable ✓ ✓MTCSB Cable ✓ ✓■ Built to order. Allow 2–3 weeks for delivery.▲ Built to order. Allow 6–8 weeks for delivery. Factory wired when ACCESS communications or ZSIis ordered for the SB breaker from the factory. When ordered with circuit breaker from the factory. One MTA or MTZ per eight trip units when required. Always required when multiple MT’s are used.One additional cable per each additional MT.6-80Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Lug informationMechanical LugSelectionFor Use Circuit Breaker Cables Per Catalog ListWith Type(s) Ampere Rating Lug Lug Wire Range Number Price $Line SideBQ, BQH,BQHFBQE,BQF,BL, BLH,HBL,HBQSwitchingNeutralsBG,BLGBQD, CQDBQD6, CQD6NGG15–4045–100Load Side15–2025–3540–5055–7080–100110–125Line Side (CQD, CQD6) & Load Side15–40 145–100 115–30 11 #14–#6 AWG Cu1 #12–#6 AWG Al1 #8–#1 AWG Cu1 #6–#1/0 AWG Al1 #14–#10 AWG Cu1 #12–#10 AWG Al1 #14–#6 AWG Cu1 #12–#6 AWG AlTC1Q1 2.60TA1Q1 2.601 #8–#6 AWG Cu Lugs are integral to1 #8–#4 AWG Al Circuit Breaker1 #8–#4 AWG Cu1 #8–#2 AWG Al1 #4–#1/0 AWG Cu1 #2–#1/0 AWG Al1 #2–#1/0 AWG Cu1 #1/0–#2/0 AWG Al#14–#6 AWG Cu#12–#6 AWG Al#8–#1 AWG Cu#6–#1/0 AWG Al#14–#6 AWG Cu#12–#6 AWG AlIntegralIntegralTC1Q1 2.6015–30 1 #14–#6 AWG Cu 3TC1Q1 7.20 (pkg. of 3)35–125 1#8–#1/0 AWG Cu#8–#2/0 AWG Al3TC1GG20 13.40 (pkg. of 3)15–125 — NUT KEEPER PLATE TNKG3 17.90 (pkg. of 3)15-125 1 #14-3/0 AWG Cu 3TW1EG30 12.80 (pkg. of 3)15-125 1 #14-1/0 AWG Cu/Al 3TA1EG10 12.80 (pkg. of 3)NEG, HEG 15-125 1 #6-3/0 AWG Cu/AI 3TA1EG30 12.80 (pkg. of 3)15-125 — Nut Keeper Kit (3-pole) TNKE3 12.30 (pkg. of 3)15-125 — Nut Keeper Kit (4-pole) TNKE4 15.60 (pkg. of 4)6MOLDED CASECIRCUIT BREAKERSNote:(A) Molded case circuit breakers having a rated ampacityof 125 amperes or less are to be connected with 60 or75°C wire. Circuit breakers having a rated ampacitygreater than 125 amperes shall only be cabled with75°C cable unless otherwise indicated on the circuitbreaker label. Exceptions to this rule are outlined inarticle 110-14 C(1)(2) of the 2005 NationalElectrical Code.(B) Connector wire ranges and cavities are established inconjunction with Table 6.1.4.2.1 of UL 489 standards.Discount Schedule MCCB Lug is steel. Sold in package of six. One nut keeper plate is required with each lug on theNGG breaker.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-81

Lug InformationAluminum Body Lugs for Copper or Aluminum WireSelectionFor Use Circuit Breaker Cables Per Catalog ListWith Type(s) Ampere Rating Lug Lug Wire Range Number Price $QJ2, QJH2#6 AWG–300 kcmil (Cu)60–225 1QJ2H, HQJ2H#4 AWG–300 kcmil (Al)TA1Q300 13.40 (pkg. of 3)All 2, 3-poleED2, ED4, ED6,ED6 ETI,HED4,HHED6CED6All 1-poleED, HED15–25 1#14–#10 AWG (Cu)#12–#10 AWG (Al)SA1E025 3.9030–100 1 #10–#1/0 (Cu or Al) LN1E100 3.90110–125 1#3-3/0 (Cu)#1-2/0 (Al)30–60 1 #10–4 (Cu or Al)70–100 1 #4–#1/0 (Cu or Al)TA1E6125LD1E060(Load Side)LD1E100(Load Side)12.7012.703.906MOLDED CASECIRCUIT BREAKERSFXD6-A, FD6-A,HFD6,#6 AWG–350 kcmil (Cu)70–250 1CFD6#4 AWG–350 kcmil (Al)TA1FD350A 22.00HHFD6SJD6(A),SHJD6(A) 65-200 1–2 #4 AWG–3/0 (Cu or Al) TA2J630 32.50SCJD6JXD2(A), JXD6(A),JD6(A), SJD6(A),HJD6(A), HJXD6(A)3/0–500 kcmil (Cu)200–400 1–2HHJXD6, HHJD6,4/0–500 kcmil (Al)TA2J6500 31.50SHJD6(A), CJD6,SCJD6LXD6(A), LD6(A),SLD6(A), HLD6(A),3/0–500 kcmil (Cu)HLXD6(A), HHLXD6, 250–600 1–24/0–500 kcmil (Al)HHLD6, SHLD6(A),TA2J6500 31.50CLD6, SCLD6LMD6 , LMXD6 ,HLMD6 , 500–600 1–2 #1–500 kcmil (Cu or Al) TA2K500 71.00HLMXD6 , MD6,MXD6, SMD6,HMD6, HMXD6,1–3 1/0–500 kcmil (Cu or Al) TA3K500 98.00SHMD6, CMD6,SCMD6500–800 1–2 500–750 kcmil (Cu or Al) TA2N750 101.00ND6,2TA4P8500250–500 kcmil (Cu or Al)584.00NXD6, SND6, 3TA4P8500 843.00HND6, HNXD6, 800–1200 1–4SHND6, CND6,2TA4N8500 588.00250–500 kcmil (Cu or Al)SCND6 3TA4N8500 853.00PD6, HPD6,CPD6PXD6,HPXD6,1200–1600 1–5 300–600 kcmil (Cu or Al) TA5P600 320.00SPD6,SHPD6PD6, PXD6,HPD6, HPXD6,SPD6, SHPD6, 1200–2000 1–6 300–600 kcmil (Cu or Al) TA6R600 338.00RD6, RXD6,HRD6, HRXD6, STDUse TA2K500 or TA3K500 only.Used for 100% rated MD/ND frame breakers. Contains 2 connectors plus 1 NDTS end barrier. Contains 3 connectors plus 1 NDTS end barrier.6-82Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Lug informationOptional Mechanical LugsSelectionFor Use Circuit Breaker Cables Per Lug Qty Per Catalog ListWith Type Ampere Rating Lug Material Lug Wire Range Catalog No Number Price $QJ2, QJH2,32.0060–225 1 Cu #6 AWG–250 kcmil (Cu) 3 TC1Q250QJ2H, HQJ2H (pkg. of 3)ED, HED 1, 2 & 3-pole 1, 2 & 3-pole 30-125 1 Cu #10–#1/0 (Cu) TC1ED6150 33.50HFD6, HHFD6,CFD6, F(X)D6-A70–250 1 Cu #6 AWG–350 kcmil (Cu) 1 TC1FD350 34.50J(X)D2(A), J(X)D6(A),1 Cu 3/0–600 kcmil (Cu) 1 TC1J6600HJD6(A), HHJD6,200–600 77.001–2 3/0–500 kcmil (Cu) 1 TC2J6500SHJD6(A), L(X)D6(A), 76.00HHLD6, SCD6,HLD6(A), SHLD6(A),1500–750 kcmil (Al)CJD6, CLD6, SCJD6, 250–600Al1 500–600 kcmil (Cu)SCLD61 TA1L6750 76.00SMD6, M(X)D6, 500–600 1–2 Cu #1 AWG–500 kcmil (Cu) 1 TC2K500 120.00HM(X)D6, HMD6, 1–3 Cu #1 AWG–350 kcmil (Cu) 1 TC3K350 151.00CMD6, SCMD6, SND6, 700–800500–750 kcmil (Cu) 2 2TA2N8750 365.001–2 AlN(X)D6, HN(X)D6, 500–750 kcmil (Al) 3 3TA2N8750 513.00SHND6, CND6, SCND6500–750 kcmil (Cu) 2 2TA3N8750 579.00800–1200 1–3 Al500–750 kcmil (Al) 3 3TA3N8750 832.00R(X)D6, HR(X)D6 1600–2000 1–5 Cu 300–600 kcmil (Cu) 1 TC5R600 426.00P(X)D6, HP(X)D6,CPD6, SPD6, SHPD61200–1600 1–4 Al 600–750 kcmil (Cu/Al) 1 TA4P750▲ 254.00Compression LugsAmpere Lugs Lug Wire Catalog ListFor Circuit Breaker Types Rating Poles Per Kit Size Number Price $Lugs (contains indicated number of lugs and necessary hardware per kit)ED2, ED4, ED6, HED4, HHED6, CED6 15–125 1, 2, 3 1 #2/0 AWG Cu/Al CCE125 27.00QJ2, QJH2, QJ2-H 125–225 2, 3 1 350 kcmil Cu/Al CCQ225 51.00F(X)D6-A, HF(X)D6, HHF(X)D6, CFD6 125–250 2, 3 1 350 kcmil CCF250 51.00JXD2-A, J(X)D6-A, HJ(X)D6-A, HHJ(X)D6-A, CJD6, SJD6-A, SHJD6-A,SCJD6, L(X)D6-A, HL(X)D6-A, CLD6, SLD6-A, SHLD6-A, SCLD6200–600 2, 3 1 500 kcmil CCL600 150.00Kits (contain lugs and hardware for complete line or load end of 2 or 3-pole breaker)M(X)D6, HM(X)D6, CMD6, SMD6, SHMD6, SCMD6 500–800N(X)D6, HN(X)D6, CND6, SND6, SHND6, SCND6 900–12002 6 CCM800K2 726.003 9CCM800K3 1056.00500 kcmil2 8 CCN1200K2 951.003 12 CCN1200K3 1393.006MOLDED CASECIRCUIT BREAKERSDistribution Lugs*Ampere Lugs Wires Catalog ListFor Circuit Breaker Types Rating Poles Per kit Per Lug Lug Wire Size Number Price $NEG, HEG 15-125 1,2,3 3 3 #14-#2 AWG Cu 3TA3EG02 101.00(for 3)NEG, HEG 15-125 1,2,3 3 6 #14-#6 AWG Cu 3TA6EG06 101.00(for 3)ED2, ED4, ED6, HED4, HHED6, CED615-125 1,2,3 1 6#14-#4 AWG Cu#6-#4 AWG AlTA6ED06 33.50F(X)D6-A, HF(X)D6, HHF(X)D6, CFD6#14-#4 AWG Cu70-250 2,3 1 6#6-#4 AWG AlTA6FD04 41.50JXD2-A, J(X)D6-A, HJ(X)D6-A, HHJ(X)D6-A, CJD6-A,#14-2/0 AWG Cu200-600 2,3 1 6SJD6, SHJD6-A, SCJD6, L(X)D6-A, HL(X)D6-A, CLD6-A,#6-2/0 AWG AlTA6JD20 89.00SLD6-A, SHLD6-A, SCLD6* Special purpose wire connectors, not for general use.▲ Built to order. Allow 6–8 weeks for delivery.Discount Schedule MCCBUsed for 100% rated JD/LD frame circuit breakers.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-83

Molded Case Circuit BreakersModificationsGeneral/Selection6MOLDED CASECIRCUIT BREAKERSA variety of internal and externalaccessories, as well as modifications,are available to adapt Siemens circuitbreakers to special installationrequirements. UL listed internalaccessories for 100 through 2000Acircuit breakers are field-addable.Internal accessories fine tune anelectrical distribution system,allowing control of the circuit breakers tomeet special application requirements.For example, emergency situations maydictate tripping critically placed circuitbreakers quickly. Shunt trips accomplishthis conveniently and efficiently.Or, when voltage drops are a concern,undervoltage trips automatically openthe circuit breaker at a predeterminedvoltage level.A wide range of external operating andmounting accessories is also available.For example, face, shallow, and backmounting plates are ideal for tailoring BQcircuit breakers to OEM applications.A complete line of operating handlesand handle-blocking devices meetswitchboard, enclosure and safetyneeds. Plug-in mounting assemblies,which simplify switchboard mounting ofcircuit breakers and permit breakerremoval without disconnecting bus orcable connections, are available.UL 489 Supplement SB Naval Use BreakersBreakers tested to UL 489 Supplement SB are qualified for useon non combat and auxiliary naval vessels.Siemens’ molded case breakers from the ED frame through the2000 Amp SB frame can be labeled “Naval” in compliance withSupplement SB.Supplement SB testing comprises two sets of vibration tests.The first is to find mechanical resonances in the product and tosubject the breaker to extreme testing at each resonant frequency.The second is a swept frequency test, in which the frequencyof excitation is changed in intervals of 1Hz, and held ateach frequency for five minutes. The excitation frequencies runfrom 4 to 33Hz, and the test is conducted in each of the threeorthogonal axes of the breaker.During these tests, the breaker must not trip from the closedposition, nor may the contacts touch from the open position.Calibration and insulation resistance are also verified during the test.For detailed information, refer to UL 489, Supplement SB.50°C Ambient Calibration — Not UL listed and not available for solid state, 100% rated breakersor 400HZ calibrated breakers.For BL Type Circuit Breakers— Add suffix ‘M’ to catalog number(Example: B120M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .No ChargeFor BQ, QJ2, and ED Frame Circuit Breakers— Replace ‘B’ in catalog number with ‘M’ . . . . . . . . . . . . . . . . . . . . . . . .No Charge(Example: BQ3M060, QJ23M200, ED63M060)For EG Frame Circuit Breakers— Replace ‘B’ in catalog number with ‘C’(Example: NEG3C015) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Add 10% to list priceFor FD, JD, LD, LMD, MD, ND, PD, and RD Frame Circuit BreakersNon-Interchangeable Trip (3–pole only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .No Charge— Replace ‘B’ in catalog number with ‘M’(Example: FXD63M225, JXD63M400)Interchangeable Trip (trip unit only, 3–pole only) . . . . . . . . . . . . . . . . . . . .No Charge— Replace ‘T’ in catalog number with ‘W’(Example: FD63W200, JD63W400)400 HZ CalibrationUL Listed (5KA IR)For BQ & BL Type Circuit Breakers (200A max.) . . . . . . . . . . . . . . . . . . . . .Add 25% to list price— Add suffix ‘Y’ to catalog numberNot UL ListedFor all other Circuit Breakers, see derating tables on page 6-152 and order standard circuit breakers.Fungus Proofing — In accordance with MIL-T-152.All BQD, CQD, NGG, ED, FD, JD, LD, LMD, MD, ND, PD, and RD, Frame Circuit Breakers areinherently fungus resistant and do not require special treatment.Fungus proofing in accordance with MIL-T-152For BL, and BQ Type Circuit Breakers— Order must be placed directly with the factory by the sales office . .Add $10.00 net per poleFor all other Circuit Breaker Types— Order must be placed directly with the factory by the sales office . .Add $160.00 net per deviceCertificate of Compliance with Test Report (catalog number CERT OF COMP.) Add $210.00 netCertificate of compliance testing must be performed on the actual device being shipped.The certificate cannot be provided after initial shipment. Order for devices with COC requirementmust be placed directly with the factory by the sales office and shipped directly to the end user.Ordering InformationFor “NAVAL” label, add $75. net per catalog number per order.Order must be placed directly with the factory by SiemensSales Office.TypesUL FileBQD/CQD E10848, Vol 10, Sec 1NGG E10848, Vol 10, Sec 2ED2, ED4, ED6, IIED4, HED6 E10848, Vol 4, Sec 11CED6 E10848, Vol 4, Sec 13FD6, FXD6, HFD6, HFXD6 E10848, Vol 4, Sec 17CFD6 E10848, Vol 4, Sec 18JXD2, JD6, JXD6, LXD6, LD6, E10848, Vol 4, Sec 8HJD6, HJXD6, HLD6, HLXD6HHJD6, HHJXD6, HHLD6, HHLXD6 E10848, Vol 4, Sec 20CJD6, CLD6 E10848, Vol 4, Sec 14MD6, MXD6, HMD6, HMXD6, CMD6, E10848, Vol 4, Sec 15ND6, NXD6, HND6, HNXD6, CND6PD6, PXD6, HPD6, HPXD6, CPD6, E10848, Vol 4, Sec 19RD6, RXD6, HRD6, HRXD6SBA400, SBS400, SBA800, E9896, Vol 15, Sec 1SBS800, SBA1200, SBS1200,SBA1600, SBS1600, SBA2000, SBS20006-84Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersInternal AccessoriesFeature CombinationsThe available feature combinations are shown in the chart below. For applications requiring combinationsof features not listed in this chart, consult the sales office for availability.GeneralModules Avail. On ST/ UVT/ Elect.Per Breaker ST/ ST/ AUX/ UVT/ UVT/ ST/ AUX/ Bell Ground Grd faultBreakers Breaker Poles ST AUX ALSW ALSW UVT AUX ALSW ALSW AUX ALSW ALSW Alarm fault w/BellQP, BQ, BL 1 1, 2, 3 1 — — — — — 1,2 — — — — —BQD, CQD, NGG 1 2, 3 1 1/1 — — — — 1,2 1/1 1 — — —QJ 1 3 1 1/1 — — — — 2 — — — — —All ED 1 1, 2, 3 1 1/1,1/2 1/1 1/1/1 1 1/1, 1/2 1/1 1/1/1 1, 2 1/1, 2/1 1 — 1 1All FD 2 2, 3 1 — — — 1 1/1 — — 1, 2 1/1 1 — — —All JD, LD, LMD 2 2, 3 1 1 — — 1 1/1, 1/2 — — 1, 2 1/1, 1/2 1, 2 — — —SJD6, SHJD6, SCJD6,1SLD6, SHLD6, SCLD63 1 1 — — 1 1/1, 1/2 — — 1, 2 1/1, 1/2 1, 2 — — —All MD, ND, PD, RDIncluding Electronic 2 2, 3 1 1/1 — — 1 1/1, 1/2 — — 1, 2 1/1, 2/1 1, 2 — — —trip 1 NC / 1 NO,2 NC / 2 NO,STD 6 3 1 — — — 1 — — — 3 NC / 3 NO, — 1 1 — —4 NC / 4 NO,5 NC / 5 NO,6 NC / 6 NOShunt Trip (ST)One or all critical circuit breakers maybe tripped from a distant control pointby use of a shunt trip device. A shunttrip operates through an auxiliary switchcontact; when the breaker opens, currentis not maintained on the shunt trip coil.Undervoltage Trip (UVT)When voltage drops to a value below 35%of the nominal coil rating, the undervoltagetrip device automatically opens the breaker.The operation is instantaneous, and thecircuit breaker cannot be reclosed until thevoltage returns to 85% of line voltage. Theundervoltage trip, which is continuouslyenergized, must be energized before thecircuit breaker can be closed.Auxiliary Switch (AUX)For applications requiring remote “on” or“off” indication (or electrical interlocking),auxiliary switches are available. Eachswitch comprises an “A” (open whencircuit breaker is open) and a “B” (closedwhen circuit breaker is open) contact witha common connection. (Form C)Alarm Switch (ALSW)The alarm switch contact is closed whenthe circuit breaker is opened automaticallyby an overload, short circuit, shunt trip orundervoltage trip. The alarm switchcontact is open when the circuitbreaker is reset.6MOLDED CASECIRCUIT BREAKERSFor ED Frames For FD Frames For JD and LD FramesFactory assembled onlyIf mechanical interlock is installed, no accessory modulecan be installed in the right pocket.If mechanical interlock is installed, no accessory modulecan be installed.If mechanical interlock is installed, no accessory modulecan be installed in the left pocket.One module per column.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-85

Molded Case Circuit BreakersExternal AccessoriesHandle TiesProvide simultaneous switching of 2 adjacent handles. Do not provide common trip.For Use With Catalog List Standard Wt Lb/Breaker Frame(s) Number Price $ each Package Std PkgSelectionBQ, BQH, HBQ, BLH, HBL ECQTH3 200.00 50 1⁄4Padlocking DevicesFor locking breaker in “OFF” position.BQXD, BL, BQ, BQH,HBQ, BLH, HBLECQLD3 98.00 10 1⁄4QTH3One pole BL, BLF, BE, BAF ECPLD1 10.10 10 1⁄4Two pole BL, BLF and BE ECPLD2 10.20 10 1⁄4All QJ HL9419 15.10 10 1⁄4All BQD, CQD BQDPLD 18.40 01 1⁄8NGG HPLG 17.90 01 1⁄4EB, 1- thru 3-pole HPLEB 11.20 01 1⁄8EG, 3- and 4-pole only HPLE 15.60 01 1⁄4All ED ED2HPL 16.00 01 1⁄4All FD FD6PL1 15.00 01 1⁄4All JD, LD, LMD JD6HPL 24.00 01 1⁄4All MD, ND, PD, RD MN6PLD 62.00 01STD STDPLD■ 131.00 01 1Filler PlatesBQ, BQH, HBQ QF3 2.80 01 1⁄41⁄4FD PadlockingDeviceFD6PLIPadlockingDeviceQLD36MOLDED CASECIRCUIT BREAKERSHandle Blocking DevicesFor holding breaker in “ON” or “OFF” position. Not a lockout/tagout device.BL, BLH, HBL, BQXD,BQ, BQH, HBQECQL1 97.00 10 1⁄4QJ2, QJH2, QJ2H, HQJ2H QJHS1 13.40 25 1All BQD, CQD, NGG BQDHBD 10.60 01 1⁄4EG HBDE 15.60 01 1⁄4All ED E2HBL 16.00 01 1⁄4All FD FD6HB1 18.40 01 1⁄2All JD, LD, LMD JD6HBL 22.00 01 1⁄2All MD, ND, PD, RD MN6BL 62.00 011⁄2Filler PlateQF3Handle ExtensionsFor replacement. One extension shipped with breaker.All MD, ND, PD, RD EX11 109.00 01 2STD EXSTD■ 137.00Terminal ShieldsCatalog List StandardBreaker Type Poles Number Price $ each PackageNGG 3 TSSG3A 28.00 1FD HandleBlocking DeviceFD6HB1HandleBlocking DeviceQL1HandleExtensionEX11■ Built to order. Allow 2–3 weeks for delivery.Note: CSO = Consult Sales OfficeSold only in standard package quantities.6-86Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersExternal AccessoriesMounting ClipsFor Use With Number of Catalog List Price Standard Wt LbBreaker Frame(s) Poles Number $ each Package Std PkgSelectionBQ, BQH 1 MB120 8.50 20 1 ⁄4Face Mounting PlatesMB120GFCI 1 FP9558 14.50 10 1 ⁄21 FP9508 13.40 10 1 ⁄2BQ, BQH, BQXD 2 FP9555 17.00 10 13 FP9556 18.40 10 1 1 ⁄21 CQDFMB1 28.00 1 1⁄4CQD, CQD6 2 CQDFMB2■ 31.50 1 1⁄43 CQDFMB3■ 35.00 1 1⁄41 FMPG1 27.00 1 1⁄4NGG 2 FMPG2 29.50 1 1⁄43 FMPG3 33.50 1 1⁄4Shallow Mounting BracketsFace Mounting PlatesFP9558 FP9508 FP9555 FP9556BQ, BQH 1–6 SMB6 5.30 30 1 1 ⁄2Back Mounting PlatesAll QP 1 and 2-pole 1, 2 I0204ML1125 31.50 10 1⁄4All QP 3-pole 3 I0303ML3100 59.00 10 1⁄4BQ, BQH, BQXD2 BR2 17.00 10 1 ⁄43 BR3 17.00 10 1 ⁄44 BR4 17.00 10 1 ⁄4SMB6 (6 shown)QML12ED2, ED4, ED6, HED4, HED6 1 E2BMB 14.20 1 1⁄4Mounting Screw KitsCQD, CQD6 CQDSMK 17.70 1 1 1 ⁄4NGG MSKG4 3.90 1 1⁄4All QJ MSQJ 4.40 1 1All ED (CED6 requires 2 kits)All FD (CFD6 requires 2 kits)MSE6 4.40 1 1⁄4MSE6100 1.10 100 1MSF6 4.40 1 1⁄4MSF650 1.10 50 1All EG 1-pole MSKE1 3.90 — —All EG 2-pole MSKE2 5.00 — —All EG 3 or 4-pole MSKE4 6.20 — —All JD, LD MSJ6 14.20 11⁄4Back MountingPlate BR2I0204ML11256MOLDED CASECIRCUIT BREAKERSAll LMD MSLMD 24.00 1 1⁄4All MD, ND, MSMN 24.00 1All PD, RD MSPR6 57.00 1 2“MI” Mechanical InterlocksFor Use With Panel Plug-in List Price Standard Wt LbBreaker Type(s) Mounted Mounted $ each Package Std PkgBQ — ECQML12 299.00 10 1 ⁄4All EG (Sliding Bar) HSBE — 553.00 1 —All EG (Walking Beam) WBMEFM — 604.00 1 —All QJ CSO — —Complete withtwo breakers 0 1All FD MI5444 MI5444 604.00 1 —All JD, LD MI5413 — 604.00 1 1All LMD MI5406 ■ — 604.00 1 1All MD MI5404 ■ — 604.00 1 3All ND MI5404 ■ — 604.00 1 3All PD, RD MI5405 ▲ — 694.00 — —STD STDMIF32▲ — 4036.00 — —1⁄4Mounting Screw KitMSE6Mechanical InterlockMI5444■ Built to order. Allow 2–3 weeks for delivery.▲ Built to order. Allow 6–8 weeks for delivery.Note: CSO = Consult Sales OfficeKit consists of 4 screws and washers.Consists of 1 screw and washers (order 100).Consists of 1 screw and washers (order 50).Discount Schedule MCCB With mechanical interlock in place, no accessory can beinstalled into circuit breaker right pole. Addition of the mechanical interlock will preventaccessory installation in the left pole. Sold only in standard package quantities. Multiply ListPrice Each times package quantity for full price. Each package contains 5 strips of 6 each. Each strip canbe broken at perforations for 1, 2 or 3-pole use. Mechanical interlock is not designed for use withinSiemens panelboards.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-87

Molded Case Circuit BreakersExternal AccessoriesRotary Door Mounted Operating HandlesTypes 1, 3, 3R , 12, 4 4XComplete Mechanism Handle Only Breaker Operator Shaft OnlyFor UseWithCatalog NumberBreaker Standard Variable List Catalog List Catalog List Length Catalog ListFrames Depth Depth Price $ Number Price $ Number Price $ (inches) Number Price $EG RHVE64X RHVE124X 225.00 — — — — — — —SelectionED CRHOESD CRHOEVD 159.00 RHOEBO 76.00 2 RHOSSD 31.50FD CRHOFSD CRHOFVD 213.00 CRHOH 51.00 RHOFBO 131.00 12 RHOSVD 31.506MOLDED CASECIRCUIT BREAKERSJD, LD CRHOJSD CRHOJVD 295.00 RHOJBO 212.0016 RHOSXD 31.50LMD CRHOLMSD CRHOLMVD 295.00 RHOLMBO 212.003 RHONSSD▲ 97.00MD, NDPD, RD RHONSD RHONVD 452.00 RHOH 116.00 RHONBO 239.00 12 RHONSVD 97.0024 RHONSXD 127.00Rotary Door Mounted Operating HandlesTypes 1 & 12Standard Depth Variable Depth Handle and Shaft Breaker OperatorFor Use With Catalog List Catalog List Catalog List Catalog ListBreaker Frames Number Price $ Number Price $ Number Price $ Number Price $CQD, NGG — — RHOCQVD 145.00 RHOH62 55.00 CQDOP 90.00ED D11CEU1 160.00 D11CEU2 183.00 — — — —FD D11CFU1▲ 198.00 D11CFU2 239.00 — — — —JD, LD — — D11CJU2 339.00 — — — —For CQD and NGG red emergency handle, order assembly RHOCQVDE (includes handle and operator).For CQD and NGG in a NEMA 3R enclosure, order CQDOP34 operator ($90.00), RHOH handle and RHOSVD shaft.For CQD and NGG in a NEMA 4 or 4X enclosure, order CQDOP34 operator, RHOH4 handle and RHOSVD shaft.Through Door Mounted Operating Handles Types 1 & 12Standard DepthVariable DepthFor Use With Catalog List Catalog ListBreaker Frames Number Price $ Number Price $CQD, NGG FMHOS 90.00 — —QJ OH9498■ 139.00 VH9499 218.00EG RHFESD 155.00 — —EG (red handle) RHFESDEM 155.00 — —ED E2RH1 155.00 E2RHV9 221.00FD F6RH1 155.00 F6RHV9 221.00Door Latch KitsCatalog Number List Catalog Number ListType Right Hand Price $ Left Hand Price $2 point latch DKR2 338.00 DKL2■ 338.003 point latch DKR3 377.00 DKL3■ 377.00RHOHD11CEU2Rotary Door MountedOperating HandlesStandardDepthF6RH1CRHOHVariable DepthF6RHV9Rotary HandleRHOCQVD■ Built to order. Allow 2–3 weeks for delivery.▲ Built to order. Allow 6–8 weeks for delivery. For use on 3-pole ED frame only.6-88 Meets the requirements of NFPA 79, section 5.3.3.1for locking external operator disconnecting devices. For 3 or 3R, order shaft and breaker operator as shown,and handle RHOH. For 4 & 4X, order handle RHOH4.List Price $150.00. Consult sales office for additional EGoperator shaft lengths.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog For extended shaft support order catalog numberRHONSB2.Discount Schedule MCCB

Molded Case Circuit BreakersExternal AccessoriesMax-Flex, Flange Mounted Variable Depth Operators Complete Kit Handle Only Breaker Operator 36" CableList List List ListNEMA Catalog Price Catalog Price Catalog Price Catalog PriceFrames Type Number $ Number $ Number $ Number $1, 3 (R),MFKE3 528.00 — —EG 12 — — — —4 (x) MFKE4X3 606.00 — —1, 3 (R),FHOE036 630.00 FHOH 315.00ED 12 FHOEBO 161.00 FHOEC036 153.004 (x) — — FHOH4 432.001, 3 (R),FHOF036 699.00 FHOH 315.00FD 12 FHOFBO 222.00 FHOFC036 161.004 (x) — — FHOH4 432.001, 3 (R),JD, LD,FHOJ036 742.00 FHOH 315.0012SJD, SLDFHOJBO 249.00 FHOJC036 177.004 (x) — — FHOH4 432.001, 3 (R),FHOLM036 741.00 FHOH 315.00LMD 12 FHOLMBO 249.00 FHOJC036 177.004 (x) — — FHOH4 432.00MD, ND, 1, 3 (R),FHON048 958.00 FHOHN 470.00PD, RD, 12FHONBO 251.00 FHONC048 237.00SMD, SND,SPD 4 (x) — — FHOHN4 630.00SelectionCableHandleBreaker OperatorMax Flex Max-Flex handles are available with solid black handles instead of the customary “red for on” flange handle. These arepreferred for use in IECmarkets, where red handles have specific meaning. Order components separately, appending theletter “i” to the catalog number (e.g. FHOHI).Alternate Length Cable OnlyED FD JD/LD/LMD MD/ND/PD/RDCatalog List Catalog List Catalog List Catalog ListInches Number Price $ Number Price $ Number Price $ Number Price $048 FHOEC048 182.00 FHOFC048 192.00 FHOJC048 209.00 FHONC048 237.00060 FHOEC060 203.00 FHOFC060 217.00 FHOJC060 239.00 FHONC060 275.00072 FHOEC072 224.00 FHOFC072 239.00 FHOJC072 275.00 FHONC072 320.00084 FHOEC084▲ 249.00 FHOFC084▲ 264.00 FHOJC084▲ 277.00 FHONC084▲ 337.00096 FHOEC096 275.00 FHOFC096 287.00 FHOJC096 376.00 FHONC096 401.00120 FHOEC120▲ 376.00 FHOFC120 376.00 FHOJC120▲ 408.00 FHONC120▲ 437.00144 FHOEC144▲ 417.00 FHOFC144▲ 417.00 FHOJC144▲ 424.00 FHONC144▲ 588.00Handle Auxiliary SwitchFor use with Max-Flex and Rotary Door operators (FHOH and RHOH). 1 NO and 1 NC contact (Form C).For Use With Catalog Number List Price $ED, FD, JD, LD, LMD, ND, PD, RD, SD, Max Flex HAS1 187.006MOLDED CASECIRCUIT BREAKERSFixed Depth Flange MountingMinimumLeft Hand MountRight Hand MountEnclosure NEMA List ListFrames Depth Type Catalog Number Price $ Catalog Number Price $ED 6.44FD 6.441, 3R, 12 FDFBEL▲ 275.00 FDFBER▲ 275.004, 4X FDFBEL4▲ 368.00 FDFBER4▲ 368.001, 3R, 12 FDFBFL▲ 294.00 FDFBFR▲ 294.004, 4X FDFBFL4▲ 391.00 FDFBFR4▲ 391.00Max-Flex handles are available with solid black handles instead of the customary “Red for On” flange handle. These arepreferred for use in IECmarkets, where red handles have specific meaning. Order components separately, appending theletter “i” to the catalog number (e.g. FHOHI).FDFBFR▲ Built to order. Allow 6–8 weeks for delivery.For 1- or 2-pole breaker order FHOED036 complete kit orFHOEDBO breaker operator only. Use MFHM3R handle.48 inch cable is standard length for M through R frameMax-Flex operators.Meets requirements of NFPA 79, section 5.3.3.1 forlocking external operator disconnecting devicesConsult sales office for additional cable lengths for EGFlex Shaft Operators.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-89

Molded Case Circuit BreakersExternal AccessoriesSelection/DimensionsNEG, HEG Motor OperatorsBreaker Frame Voltage Catalog Number List Price $EG 120/240AC, 125VDC SEAER 1510.00Consult Sales Office for availability.Telemand ® Motor OperatorAC Hinged to ListBreaker Frame Voltage Open Down Price $ED except CED120 MOE6120 3375.00240 MOE6240▲ 3672.00ED motor operator opens downward.Breaker DC Hinged to List AC Hinged to ListFrame Voltage Open Right Price $ Voltage Open Right Price $24 MOF6024DC▲ 3549.00 120 MOF6120 3447.00FD 48 MOF6048DC▲ 3549.00 240 MOF6240 3875.00125 MOF6125DC▲ 3686.0024 MOJ6024DC▲ 4507.00 120 MOJ6120 4460.00JD, LD 48 MOJ6048DC▲ 4507.00 240 MOJ6240 4460.00125 MOJ6125DC▲ 4643.0024 MOLMD6024DC▲ 4507.00 120 MOLMD6120 4460.00LMD 48 MOLMD6048DC▲ 4507.00 240 MOLMD6240 4460.00125 MOLMD6125DC▲ 4643.00MD, ND, — — — 120 MOMN6120 5038.00PD, RD — — — 240 MOMN6240 5038.00To order FD through RD motor operators with Left side hinges, add “L” to catalog number (e.g. MOF6120L).List prices are the same.▲Telemand Motor OperatorFD, JD, LD, LMD, MD, ND, PD, RDFrames6MOLDED CASECIRCUIT BREAKERSDimensionsFrame A B C D E FED 7.04 4.31 — 4.31 13.84 8.84FD 9.50 4.55 1.60 6.84 9.70 7.58JD, LD, LMD 11.00 7.50 0.79 8.34 9.85 7.74MD, ND, PD, RD 16.00 9.00 — 9.83 13.13 10.13Operating CurrentsOnOffCatalog In-Rush Running Time In-Rush Running Time ResetNumber (Amps) (Amps) (msec) (Amps) (Amps) (msec) (Amps)MOE6120 10.25 2.3 550 10 2.3 400 2.3MOE6240 5.2 1.1 500 5 1 330 1.1MOF6120/L 13.6 5.5 200 13.6 5.5 175 5.5MOF6240/L 7.6 3.5 200 7.6 3.5 185 3.5MOLMD6120/L 13.6 6 210 13.6 6 185 6MOJ6120/L 13.6 6 210 13.6 6 185 6MOJ6240/L 7.6 3.5 217 7.6 3.5 185 3.5MOMN6120/L 30.2 13.2 240 30.2 13.2 210 13.2MOMN6240/L 14.7 6 260 14.7 6 230 6EFront ViewBottom ViewFor inches / millimeters conversion, see Application Data section.▲ Built to order. Allow 6–8 weeks for delivery.6-90Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersExternal AccessoriesPlug-In Mounting Assemblies, Including Base and Tulip AssembliesLine SideLoad SideSteel SwitchboardFor Use With Catalog List Catalog List Mounting Plate Breaker Frames Poles Number Price $ Number Price $ Catalog NumberEG 3 PCBERC3 352.00 — —4 PCBERC4 402.00 — ——All ED 2 PC2637▲ 109.00 PC2638▲ 109.00except CED 3 PC2657 176.00 PC2658 176.00CED2 PC2637▲ 109.00 PC2638▲ 109.003 PC2657 176.00 PC2658 176.00All FD 2 PC4753▲ 265.00 PC4753▲ 265.00except CFD 3 PC4754 345.00 PC4754 345.00CFD2 PC4753▲ 265.00 PC4753▲ 265.003 PC4754 345.00 PC4754 345.00All JD 2 PC5777▲ 356.00 PC5777▲ 356.00except CJD 3 PC5778 589.00 PC5778 589.00PL2616PL2617PL4762PL4763PL5796Kit CJD, SCJD 3 PCCJD 640.00 PCCJD 640.00 PL5797All LD 2 PC5660▲ 667.00 PC5660▲ 667.00except CLD 3 PC5661 933.00 PC5661 933.00PL5680Kit CLD, SCLD 3 PCCLD 984.00 PCCLD 984.00 PL5797All MDAll NDTulip Assemblies Separately2 PC5662▲ 1227.00 PC5662▲ 1227.003 PC5663 1499.00 PC5663 1499.002 PC5664 ▲ 1696.00 PC5664 ▲ 1696.003 PC5666 1955.00 PC5666 1955.00PL9698PL9699➝SwitchboardMountingPlateBase➝➝➝Selection➝➝TulipAssembliesRS47552-Pole3-PoleRS4756For Catalog List Catalog ListFrame Number Price $ Number Price $ED TCE2▲ 137.00 TCE3▲ 206.00FD TCF2▲ 206.00 TCF3▲ 308.00JD TCJ2▲ 238.00 TCJ3▲ 345.00LD TCL2▲ 274.00 TCL3▲ 410.00MD TCM2▲ 308.00 TCM3▲ 457.00ND TCN2▲ 410.00 TCN3▲ 479.00Circuit BreakerRear-Connecting StudsWith Rear-Connecting StudsFor UseExtensionWithBehindLine SideLoad SideBreaker Ampere Breaker Catalog List Catalog ListFrames Rating Description (inches) Number Price $ Number Price $ All EG125 Short 3.60 RTLESR 43.00 RTLESR 43.00125 Long 6.00 RTLELR 51.00 RTLELR 51.00100 Line Side (Short) 2.38 RS2643 ▲ 45.00 — —All ED100 Load Side (Short) 2.38 — — RS2644 ▲ 45.00100 Line Side (Long) 4.88 RS2641 ▲ 54.00 — —100 Load Side (Long) 4.88 — — RS2642 ▲ 54.00All FD250 Short 3.12 RS4756 ▲ 65.00 RS4756 ▲ 65.00250 Long 7.06 RS4755 ▲ 102.00 RS4755 ▲ 102.00All JD400 Short 5.85 RS5774▲ 180.00 RS5774▲ 180.00400 Long 11.20 RS5773▲ 180.00 RS5773▲ 180.00All LD600 Short 5.85 RS5784▲ 214.00 RS5784▲ 214.00600 Long 11.20 RS5783▲ 203.00 RS5783▲ 203.00CJD, SCJDCLD, SCLDAdd required shield kit. CLRSJL3 51.00LM(X)D6,800Short 5.85 RS5788▲ 332.00 RS5788▲ 332.00HLM(X)D6 Long 11.20 RS5787▲ 313.00 RS5787▲ 313.00All MD, 1200 Short 5.50 RS5786▲ 258.00 RS5786▲ 258.00ND 1200 Long 8.00 RS5785▲ 326.00 RS5785▲ 326.00▲ Built to order. Allow 6–8 weeks for delivery.For vertical bus mounting — for horizontal, substituteFor proper electrical clearance, studs must alternatePC5665 for PC5664 and PC5667 for PC5666.between short and long stud lengths on circuit breakerFurnished at no extra charge when ordered with plug-inPrice includes one current stud, insulating tube, studpoles (e.g. SLSLSL or LSLSLS).mounting assembly.nuts and terminal shields, when required.Plug-in assembly for EG breakers include line and loadEach piece catalog number consists of (1) mountingside in one assembly.block assembly and required tulip assemblies (2) for2-pole, (3) for 3-poleDiscount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-91➝➝➝➝➝➝6MOLDED CASECIRCUIT BREAKERS

Siemens VL Circuit BreakersTechnical OverviewFrame Summary and Ratings TableFrame Family DG FG JGTechnical6MOLDED CASECIRCUIT BREAKERSContinuous Ampere Range 30 to 150A 40 to 250A 70 to 400ANumber of Poles 2,3 4 2,3 4 2,3 4Maximum Voltage Rating 600V 600V 600VType of ProtectionThermal-Magnetic ◆ ◆ ◆Electronic ◆ ◆ ◆Electronic with LCD ◆ ◆ ◆Motor Circuit Protector ◆ ◆ ◆Molded Case Switch ◆ ◆ ◆100% Rated Breaker — — ◆50°C Calibrated Breaker ◆ ◆ ◆Interchangeable Trip Unit ◆ ◆ ◆W In.(mm) 4.1 (105) 2, 3-pole / 5.5 (139) 4-pole 5.5 (139) 7.2 (183)H 7.3 (175) 11 (279)D 3.4 (81) 4.2 (102)D2 4.2 (107) 5.4 (138)Type N – Normal Interrupting Rating , RMS Symmetrical Amperes (kA)240Vac 65 65 65UL 480Vac 35 35 35600Vac 18 18 25240Vac 65/65 65/65 65/65IEC 415Vac 40/40 40/40 45/45(l CU /l CS )— — — —690Vac 12/6 12/6 12/6DC Voltages – Interrupting Rating (kA) 250Vdc - 2p 30 30 30500Vdc - 3p 18 18 25600Vdc - 3p — — —750Vdc - 4p — — —Type H – High Interrupting Rating , RMS Symmetrical Amperes (kA)240Vac 100 100 100UL 480Vac 65 65 65600Vac 20 20 25240Vac 100/75 100/75 100/75IEC 415Vac 70/70 70/70 70/70(l CU /l CS )— — — —690Vac 12/6 12/6 15/8DC Voltages – Interrupting Rating (kA) 250Vdc - 2p 30 30 30500Vdc - 3p 18 18 35600Vdc - 3p — — —750Vdc - 4p — — —Type L – Very High Interrupting Rating , RMS Symmetrical Amperes (kA)240Vac 200 200 200UL 480Vac 100 100 100600Vac 25 25 25240Vac 200/150 200/150 200/150IEC 415Vac 100/75 100/75 100/75(l CU /l CS )— — — —690Vac 12/6 12/6 15/8DC Voltages – Interrupting Rating (kA) 250Vdc - 2p 30 30 30500Vdc - 3p 18 30 35600Vdc - 3p — — —750Vdc - 4p — — — UL does not recognize AIC ratings for Molded CaseSwitches or Motor Circuit Protectors. Not UL. 500Vdc nominal, 600Vdc max. for ungrounded DC UPSsystems. DC Interruption Ratings do not apply to electronic tripcircuit breakers.6-92Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Siemens VL Circuit BreakersTechnical OverviewFrame Summary and Ratings Table — ContinuedFrame Family LG MG NG PGTechnicalContinuous Ampere Range 150 to 600A 200 to 800A 300 to 1200A 400 to 1600ANumber of Poles 2, 3 2,3 4 2,3 4 3 4Maximum Voltage Rating 600V 600V 600V 600VType of ProtectionThermal-Magnetic ◆ ◆ ◆ ◆Electronic ◆ ◆ ◆ ◆Electronic with LCD ◆ ◆ ◆ ◆Motor Circuit Protector ◆ ◆ ◆ —Molded Case Switch ◆ ◆ ◆ ◆100% Rated — ◆ ◆ ◆50°C Calibrated Breaker ◆ ◆ ◆ ◆Interchangeable Trip Unit ◆ ◆ ◆ ◆W In.(mm) 5.5 (139) 7.5 (190) 10 (253) 9 (229) 2, 3-pole / 12 (305) 4-poleH 11 (279) 16 (406) 16 (406)D 4.2 (102) 4.7 (114) 6.2 (157)D2 5.4 (138) 5.9 (151) 8.1 (207)Type N – Normal Interrupting Rating , RMS Symmetrical Amperes (kA)240Vac 65 65 65 65UL 480Vac 35 35 35 35600Vac 25 25 25 25240Vac 65/65 65/65 65/65 65/65IEC 415Vac 45/45 50/50 50/25 50/25(l CU /l CS )— — — — —690Vac 12/6 20/10 20/10 20/10DC Voltages – Interrupting Rating (kA) 250Vdc - 2p 30 22 22 22500Vdc - 3p 25 35 35 35600Vdc - 3p — — — —750Vdc - 4p — — — —Type H – High Interrupting Rating , RMS Symmetrical Amperes (kA)240Vac 100 100 100 100UL 480Vac 65 65 65 65600Vac 25 35 35 35240Vac 100/75 100/75 100/75 100/50IEC 415Vac 70/70 70/70 70/35 70/35(l CU /l CS )— — — — —690Vac 15/8 30/15 30/15 30/15DC Voltages – Interrupting Rating (kA) 250Vdc - 2p 30 25 25 25500Vdc - 3p 35 50 50 50600Vdc - 3p — — — —750Vdc - 4p — — — —Type L – Very High Interrupting Rating , RMS Symmetrical Amperes (kA)240Vac 200 200 200 200UL 480Vac 100 100 100 100600Vac 25 50 65 65240Vac 200/150 200/150 200/150 200/150IEC 415Vac 100/75 100/75 100/75 100/75(l CU /l CS )— — — — —690Vac 15/8 35/17 35/17 35/17DC Voltages – Interrupting Rating (kA) 250Vdc - 2p 30 42 42 42500Vdc - 3p 35 65 65 65600Vdc - 3p — — — —750Vdc - 4p — — — —6MOLDED CASECIRCUIT BREAKERS UL does not recognize AIC ratings for Molded CaseSwitches or Motor Circuit Protectors. Not UL. 500Vdc nominal, 600Vdc max. for ungrounded DC UPSsystems. DC Interruption Ratings do not apply to electronic tripcircuit breakers.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-93

VL Circuit BreakersTrip Unit OverviewThe interchangeability of the VL circuitbreaker trip units allow for easy conversionfrom any of 3 types of protection.They are thermal-magnetic, electronic,or electronic with a built-in LCD display.The thermal-magnetic trip unit featuresan adjustable magnetic trip setting. Theelectronic trip units are microprocessorbased true RMS sensing devices andare available with a variety of adjustabletrip settings, configurations, and informationmenus. With precise controlover the circuit beaker functions andaccess to system status, diagnostics,and information, these trip units allowfor unsurpassed flexibility in circuitcoordination.An example of coordination is the outof the box Ground Fault function on theModel 545 trip units. The pick-up andtime delay settings are fixed for eachVL Trip UnitsSelectionframe and do not overlap with the settingson the other frames. Therefore,when VL breakers are used together ina system the GF protection is automaticallycoordinated. The user also has theability to program a custom coordinationscheme with the high level ofadjustability available on the Model576 trip units.Trip Unit Functions Model 525 Model 545 Model 576Thermal- Electronic Electronic Electronic Electronic Electronic with LCD Electronic with LCDMagnetic LI LIG LSI LSIG LSI LSIGContinuous CurrentSetting (I r)Fixed ◆ ◆ ◆ ◆ ◆ ◆Long Time Delay (t r) ◆ ◆ Fixed Fixed ◆ ◆InstantaneousOvercurrent Setting (I i)◆ ◆ ◆ Fixed Fixed ◆ ◆6MOLDED CASECIRCUIT BREAKERSShort Time Pick-up (I sd) ◆ ◆ (ON/OFF) (ON/OFF)Short Time Delay (t sd) ◆ ◆ ◆ ◆Short Time l 2 t Pick-up ◆ ◆ ◆ ◆Ground Fault Pick-up (l g) Fixed Fixed ◆Ground Fault Delay (t g) Fixed Fixed ◆Alarm & Status LEDs ● ● ● ● Built-in Display (LCD) ● ●Pre-Trip Alarm ● ●Last trip information ● ●Zone Selective ● ●Communications ● ●◆ – Adjustable setting.● – This feature is included.“fixed” – Non-Adjustable setting. – Feature is not included. – Requires the trip unit to be connected to a PC (via a COMPRO or COMMOD communications module) for access or programming.Continuous Amps Rating (I r )This setting is the continuous currentthat the breaker will carry without tripping.It can be set up to 100% of the tripunit’s nominal rating (I n ).Long Time Delay (t r )Sometimes referred to as the “overload”position, this function controls the breaker‘s“pause-in-tripping” time. It allowslow level, temporary inrush currentssuch as those encountered when startinga motor to pass without tripping. Thetime delay begins when the currentreaches 6 x I r .Instantaneous Pick-up (I i )This function sets the breaker to tripinstantaneously during high fault conditions.On Model 545 trip units this settingis fixed on LSI and LSIG trip unitsand adjustable on LI and LIG trip units.These features are fully adjustable onModel 576 trip units.Short Time Pick-Up (l sd )This function controls the level of faultcurrent the breaker will carry for a shorttime without tripping, thus allowingdownstream devices to clear short circuitsahead of up-stream protection.It may be defeated (turned-off) onModel 576 trip units.Short Time Delay (t sd )This controls the interval of time thebreaker will remain closed against a fault(at the Short Time Pick-up current level)without tripping. The time delay may beset at fixed points or at short time intervalsbased on l 2 t curves. This function isused with the Short Time Pick-up toachieve selectivity and better systemcoordination.Ground Fault Pick-Up (I g )This setting controls the level of groundfault current that will cause the breakerto trip. Model 545 Electronic Trip Unitsact on the residual current to senseground current. The Model 576Electronic Trip Unit is programmableand allows the user to select eitherthe residual current method or directdetection (via a separate current transformer)to detect ground current.Ground Fault Time Delay (t g )This controls the interval of time thebreaker will remain closed after a groundfault is detected (at the Ground FaultPick-up current level) without tripping.6-94Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

M4-PAN-TORXM4-PAN-TORXVL Circuit BreakersGeneral InformationSelectionThermal-Magnetic trip units, Model 525, combine the inverse time element design for low level overloads, and instantaneousmagnetic action for short circuit protection. The standard unit has preset overload protection and an adjustable instantaneous tripsetting, with 6 set points. Thermal-Magnetic trip units are available throughout the VL family, from 15 to 1600A.38503300I i440049502750 5500I n= 600A40 CTM ~Trip Unit/Disparador 525Type/Tipo CLT3Cat. No. CLT3B600Electronic Trip UnitsElectronic trip units are available throughthe VL family, from 60A (which can beset as low as 30A) up through 1600A .They are also available in four tripconfigurations (LI, LIG, LSI, LSIG) andfeatures can include a built-in LCDdisplay.On the Model 545 Electronic Trip Unit aflashing LED confirms that themicroprocessor in operating and anotherindicates an overload condition. Forease-of-use and to insure propercoordination, the set points for thecontinuous current are shown on theface of these trip units in amps.On the Model 576, the LCD version, thecurrent in each phase is continuouslyshown on the display. Unlike manydisplays, no secondary or auxiliary voltageis required as long as the breaker isenergized and a minimal load current ispresent. These trip units can also indicatethe “last trip” status (date, time,amps) when they‘re connected to a PCvia one of our communications modules.Typical Trip Unit Labeling and Adjustment PositionsModel 545 Electronic Trip Unitwith LSIG trip functionsModel 576 Electronic Trip Unithas an LCD display6MOLDED CASECIRCUIT BREAKERSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-95

VL Circuit BreakersDG 150A Frame, VL SeriesOrdering InformationComplete Assembled BreakerPrices for a complete factory assembled DG breaker include the frame, trip unit,and standard line and load connectors, all factory installed and shipped as acomplete breaker. Assembled breakers are only available with standardconnectors.For any other configuration, order the frame, trip unit, and terminals asseparate items.For DC applications, use thermal magnetic trip unit only.For reverse feed applications, select non-interchangeable trip breakers only. Fornon-interchangeable trip breakers, change the third digit of the catalog numberto “X” for standard breakers.For 50˚C and special applications, refer to page 6-144. AMounting hardware is included with each frame or complete breaker.Selection6MOLDED CASECIRCUIT BREAKERSInterrupting RatingsRMS Symmetrical Amperes (KA)UL 489 IEC 60947-2Volts AC (50/60 Hz) Volts DC Volts AC (50/60 Hz)Breaker 220/240 380/415 690Type 240 480 600 250 500 ICU ICS ICU ICS ICU ICSNDG 65 35 18 30 18 65 65 40 40 12 6HDG 100 65 20 30 18 100 75 70 70 12 6LDG 200 100 25 30 18 200 150 100 75 12 6Connectors for 75°C WireAmpere Wire No. of cables Catalog ListConstruction Rating Range per connector Number Price $Steel 30-150 #8–1/0 Cu 1 3TW1DG20 22.00Aluminum 30-150 #6–3/0 Al/Cu 1 3TA1DG30 22.00Copper 30-150 #6–3/0 Cu 1 3TC1DG30 101.00Distribution Lugs30-150 #14–#2 Cu (3pcs. Max) 3 3TA3DG02 110.0030-150 #14–#4 Cu 6 3TA6DG04 110.00Compression Lugs30-150 #14–2/0 kcmil Al/Cu – 2CLD20 54.0030-150 #14–2/0 kcmil Al/Cu – 3CLD20 81.00 Standard connector supplied with complete breakers. Kit consists of 3 terminal connectors. 2 Lugs for 2-pole breakers. 3 Lugs for 3-pole breakers.Dimensions, inches (mm)NumberTo Handleof Poles Width Length Depth D12, 3 4.1 (105)6.9 (175) 3.4 (81) 4.2(107)4 5.5 (139)Approx. Shipping Weight, lbs. (kg)Trip Unit CompletePoles Frame Thermal-Mag. Electronic Breaker2, 3 3.7 (1.7) 2.2 (1.0) 2.6 (1.2) 5.9 (2.7)4 4.9 (2.2) 2.6 (1.2) 3.3 (1.5) 7.5 (3.4)DG Thermal-Magnetic,Instantaneous TripAdjustment RangeInstantaneousTrip Unit Continuous Overcurrent Setting (I i )Amp Rating (I n ) Min. Max.50 450 70060 450 70070 450 70080 450 80090 500 1000100 500 1000110 550 1100125 625 1250150 800 1600Note: Each breaker has 6 trip settings in this range.A - Consult with Siemens for availability.External Accessories pages 6-125 through 6-1396-96Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

VL Case Circuit BreakersDG 150A Thermal-Magnetic Trip UnitSelectionI iAMPS1120 12809601440800 1600I n =150A40? CTM ~TRIP UNIT/DISPARADOR 525Type / Tipo CDT3Cat. No. - CDT3B150DG 150A Frame 2-Pole with Thermal-Magnetic Trip UnitModel 525 Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNDG2F150 618.00 HDG2F150 1533.00 LDG2F150 2664.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLY50 NDG2B050L 1002.00 HDG2B050L 1917.00 LDG2B050L 3048.00 CDT2B050 355.0060 NDG2B060L 1002.00 HDG2B060L 1917.00 LDG2B060L 3048.00 CDT2B060 355.0070 NDG2B070L 1074.00 HDG2B070L 1989.00 LDG2B070L 3120.00 CDT2B070 427.0080 NDG2B080L 1074.00 HDG2B080L 1989.00 LDG2B080L 3120.00 CDT2B080 427.0090 NDG2B090L 1074.00 HDG2B090L 1989.00 LDG2B090L 3120.00 CDT2B090 427.00100 NDG2B100L 1074.00 HDG2B100L 1989.00 LDG2B100L 3120.00 CDT2B100 427.00110 NDG2B110L 2234.00 HDG2B110L 3149.00 LDG2B110L 4280.00 CDT2B110 1587.00125 NDG2B125L 2234.00 HDG2B125L 3149.00 LDG2B125L 4280.00 CDT2B125 1587.00150 NDG2B150L 2234.00 HDG2B150L 3149.00 LDG2B150L 4280.00 CDT2B150 1587.00DG 150A Frame 3-Pole with Thermal-Magnetic Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNDG3F150 768.00 HDG3F150 1796.00 LDG3F150 2948.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLY50 NDG3B050L 1227.00 HDG3B050L 2255.00 LDG3B050L 3407.00 CDT3B050 416.0060 NDG3B060L 1227.00 HDG3B060L 2255.00 LDG3B060L 3407.00 CDT3B060 416.0070 NDG3B070L 1344.00 HDG3B070L 2372.00 LDG3B070L 3524.00 CDT3B070 533.0080 NDG3B080L 1344.00 HDG3B080L 2372.00 LDG3B080L 3524.00 CDT3B080 533.0090 NDG3B090L 1344.00 HDG3B090L 2372.00 LDG3B090L 3524.00 CDT3B090 533.00100 NDG3B100L 1344.00 HDG3B100L 2372.00 LDG3B100L 3524.00 CDT3B100 533.00110 NDG3B110L 2793.00 HDG3B110L 3821.00 LDG3B110L 4973.00 CDT3B110 1982.00125 NDG3B125L 2793.00 HDG3B125L 3821.00 LDG3B125L 4973.00 CDT3B125 1982.00150 NDG3B150L 2793.00 HDG3B150L 3821.00 LDG3B150L 4973.00 CDT3B150 1982.006MOLDED CASECIRCUIT BREAKERSDG 150A Frame 4-Pole with Thermal-Magnetic Trip Unit AN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNDG4F150 998.00 HDG4F150 2335.00 LDG4F150 3833.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLY50 NDG4B050L 1597.00 HDG4B050L 2934.00 LDG4B050L 4432.00 CDT4B050 541.0060 NDG4B060L 1597.00 HDG4B060L 2934.00 LDG4B060L 4432.00 CDT4B060 541.0070 NDG4B070L 1750.00 HDG4B070L 3087.00 LDG4B070L 4585.00 CDT4B070 694.0080 NDG4B080L 1750.00 HDG4B080L 3087.00 LDG4B080L 4585.00 CDT4B080 694.0090 NDG4B090L 1750.00 HDG4B090L 3087.00 LDG4B090L 4585.00 CDT4B090 694.00100 NDG4B100L 1750.00 HDG4B100L 3087.00 LDG4B100L 4585.00 CDT4B100 694.00110 NDG4B110L 3634.00 HDG4B110L 4971.00 LDG4B110L 6469.00 CDT4B110 2578.00125 NDG4B125L 3634.00 HDG4B125L 4971.00 LDG4B125L 6469.00 CDT4B125 2578.00150 NDG4B150L 3634.00 HDG4B150L 4971.00 LDG4B150L 6469.00 CDT4B150 2578.00A - Consult with Siemens for availability.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-97

VL Circuit BreakersDG 150A Electronic 3-Knob & LCD Trip UnitsSelectionDG 150A Frame 3-Pole Electronic Trip UnitModel 545 Trip UnitsN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNDG3F150 768.00 HDG3F150 1796.00 LDG3F150 2948.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLYELECTRONIC LI TRIP60 NDG3N060L 1591.00 HDG3N060L 2619.00 LDG3N060L 3771.00 CDT3N060 780.00100 NDG3N100L 1709.00 HDG3N100L 2737.00 LDG3N100L 3889.00 CDT3N100 898.00150 NDG3N150L 3157.00 HDG3N150L 4185.00 LDG3N150L 5337.00 CDT3N150 2346.00ELECTRONIC LSI TRIP60 NDG3P060L 1925.00 HDG3P060L 2953.00 LDG3P060L 4105.00 CDT3P060 1114.00100 NDG3P100L 2043.00 HDG3P100L 3071.00 LDG3P100L 4223.00 CDT3P100 1232.00150 NDG3P150L 3492.00 HDG3P150L 4520.00 LDG3P150L 5672.00 CDT3P150 2681.00ELECTRONIC LSIG TRIP60 NDG3U060L 3806.00 HDG3U060L 4834.00 LDG3U060L 5986.00 CDT3U060 2995.00100 NDG3U100L 3923.00 HDG3U100L 4951.00 LDG3U100L 6103.00 CDT3U100 3112.00150 NDG3U150L 5372.00 HDG3U150L 6400.00 LDG3U150L 7552.00 CDT3U150 4561.00ELECTRONIC LIG TRIP60 NDG3X060L 3472.00 HDG3X060L 4500.00 LDG3X060L 5652.00 CDT3X060 2661.00100 NDG3X100L 3590.00 HDG3X100L 4618.00 LDG3X100L 5770.00 CDT3X100 2779.00150 NDG3X150L 5038.00 HDG3X150L 6066.00 LDG3X150L 7218.00 CDT3X150 4227.00MOLDED CASECIRCUIT BREAKERS6Model 576 Trip UnitDG 150A Frame 3-Pole Electronic LCD Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNDG3F150 768.00 HDG3F150 1796.00 LDG3F150 2948.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLYLCD ELECTRONIC LSI TRIP60 NDG3D060L 2092.00 HDG3D060L 3120.00 LDG3D060L 4272.00 CDT3D060 1281.00100 NDG3D100L 2226.00 HDG3D100L 3254.00 LDG3D100L 4406.00 CDT3D100 1415.00150 NDG3D150L 3894.00 HDG3D150L 4922.00 LDG3D150L 6074.00 CDT3D150 3083.00LCD ELECTRONIC LSIG TRIP60 NDG3E060L 3974.00 HDG3E060L 5002.00 LDG3E060L 6154.00 CDT3E060 3163.00100 NDG3E100L 4108.00 HDG3E100L 5136.00 LDG3E100L 6288.00 CDT3E100 3297.00150 NDG3E150L 5775.00 HDG3E150L 6803.00 LDG3E150L 7955.00 CDT3E150 4964.006-98Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

VL Circuit BreakersInternal Accessories for DG 150A and FG 250A FramesAuxiliary Switch and Alarm Switch Combination KitsDescription Mounting Pocket Catalog Number List Price $1 Alarm Switch1A/B Left, Right ASKL1 265.00Bases AMBL2 & AMBL32 Aux. Switches1A + 1B Left, Right, Neutral ASKL2 265.00Bases AMBL12 Aux. + 1 Alarm Switch1A + 1B, 1A/B Left, Right ASKL3 530.00Bases AMBL2 & AMBL3SelectionAuxiliary/Alarm Switch Mounting Base OnlyDescription Mounting Pocket Catalog Number List Price $Up to 3 Auxiliary Switches Left, Right, Neutral AMBL1 61.002 Aux. + 1 Alarm Switch Left Pocket Only AMBL2 61.002 Aux. + 1 Alarm Switch Right Pocket Only AMBL3 61.00Auxiliary/Alarm Switch OnlyCommon to DG - PG FramesDescription Catalog Number List Price $1 Normally Open Contact (1A) ASWPA 108.001 Normally Closed Contact (1B) ASWPB 108.00Shunt TripsDescription Mounting Pocket Catalog Number List Price $24 VDC STRLB24DC 594.0048-60 VDC STRLC60DC 594.00110-127 VDC STRLD125DC 594.00220-250 VDC Right Pocket Only STRLE250DC 594.0048-60 VAC STRLM60 594.00110-127 VAC STRLN120 594.00208-277 VAC STRLS277 594.00380-600 VAC STRLV600 594.00Undervoltage ReleaseDescription Mounting Pocket Catalog Number List Price $12 VDC UVRLA12DC 594.0024 VDC UVRLB24DC 594.0048 VDC UVRLC48DC 594.0060 VDC UVRLG60DC 594.00110-127 VDC UVRLD125DC 594.00220-250 VDC UVRLE250DC 594.00110-127 VAC Right Pocket Only UVRLN120 594.00220-240 VAC UVRLR240 594.00208 VAC UVRLP208 594.00277 VAC UVRLS277 594.00380-415 VAC UVRLT415 594.00440-480 VAC UVRLU480 594.00600 VAC UVRLV600 594.006MOLDED CASECIRCUIT BREAKERS‘A’ refers to a normally open contact (open when the breaker contacts are open).‘B’ refers to a normally closed contact (closed when the breaker contacts are open). Refer to the “Accessory Locations” chart for guidelines and limitations about which pockets may be used for accessorycombinations. These kits include two bases, one for mounting switches in the left pocket and another for mounting in the right. Includes 1A and 1B contact for alarm purposes, only one of which may be installed at any time.External Accessories pages 6-125 through 6-139Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-99

VL Circuit BreakersFG 250A Frame, VL SeriesOrdering InformationComplete Assembled BreakerPrices for a complete factory assembled FG breaker include the frame, tripunit, and standard line and load connectors, all factory installed and shippedas a complete breaker. Assembled breakers are available only with standardconnectors.For any other configuration, order the frame, trip unit, and terminals asseparate items.For DC applications, use thermal magnetic trip unit only.For reverse feed applications, select non-interchangeable trip breakers only.For non-interchangeable trip breakers, change the third digit of the catalognumber to “X” for standard breakers.For 50˚C and special applications, refer to page 6-144. AMounting hardware is included with each frame or complete breaker.Interrupting RatingsRMS Symmetrical Amperes (KA)UL 489 IEC 60947-2Volts AC (50/60 Hz) Volts DC Volts AC (50/60 Hz)Breaker 220/240 380/415 690Type 240 480 600 250 500 ICU ICS ICU ICS ICU ICSNFG 65 35 18 30 18 65 65 40 40 12 6HFG 100 65 20 30 25 100 75 70 70 12 6LFG 200 100 25 30 30 200 150 100 75 12 6Selection/DimensionsDimensions, inches (mm)NumberTo Handleof Poles Width Length Depth D12, 3 4.1 (105)6.9 (175) 3.4 (81) 4.2 (107)4 5.5 (139)Shipping Weight, lbs. (kg)Trip Unit CompletePoles Frame Thermal-Mag. Electronic Breaker2, 3 4.0 (1.8) 2.2 (1.0) 2.6 (1.2) 6.2 (2.8)4 5.3 (2.4) 2.6 (1.2) 3.3 (1.5) 7.9 (3.6)6MOLDED CASECIRCUIT BREAKERSConnectors for 75°C WireAmpere Wire No. of cables Catalog ListConstruction Rating Range per connector Number Price $Steel 50-250 #4–350 kcmil Cu 1 3TW1FG350 65.00Aluminum 50-250 #4–350 kcmil Al/Cu 1 3TAW1FG350 65.00Copper 50-250 #4–350 kcmil Cu 1 3TCW1FG350 104.00Distribution Lugs50-250 #12–2/0 Cu 3 3TA3FG20 110.0050-250 #14–#4 Cu 6 3TA6FG04 110.00Compression Lugs50-250 #6–350 kcmil Al/Cu – 2CLF350 102.0050-250 #6–350 kcmil Al/Cu – 3CLF350 152.00 Standard connector supplied with complete breakers. Kit consists of 3 terminal connectors. 2 Lugs for 2-pole breakers. 3 Lugs for 3-pole breakers.Enclosures AListNEMA Class Catalog Number Price $1 (Flush) FG0251F CSO1 (Surface) FG0221S (225A max) CSO1 (Surface) FG0251S (250A) CSO3R FG0253R CSO4 – 4X FG0254S CSO7-9 FG02579 CSO12 FG02512 CSONeutral (future) —FG Thermal-Magnetic,Instantaneous TripAdjustment RangeInstantaneousTrip Unit Continuous Overcurrent Setting (I i )Amp Rating (I n ) Min. Max.100 625 1250110 800 1600125 800 1600150 800 1600175 1000 2000200 1000 2000225 1250 2500250 1250 2500Note: Each breaker has 6 trip settings in this range.A - Consult with Siemens for availability.External Accessories pages 6-125 through 6-1396-100Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

VL Circuit BreakersFG 250A Thermal-Magnetic Trip UnitSelectionTM ~150022501250 2500Model 525 Trip UnitFG 250A Frame 2-Pole with Thermal-Magnetic Trip UnitFG 250A Frame 3-Pole with Thermal-Magnetic Trip UnitFG 250A Frame 4-Pole with Thermal-Magnetic Trip Unit AN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNFG2F250 1128.00 HFG2F250 2994.00 LFG2F250 4505.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLY100 NFG2B100L 2374.00 HFG2B100L 4240.00 LFG2B100L 5751.00 CFT2B100 1158.00110 NFG2B110L 2374.00 HFG2B110L 4240.00 LFG2B110L 5751.00 CFT2B110 1158.00125 NFG2B125L 2374.00 HFG2B125L 4240.00 LFG2B125L 5751.00 CFT2B125 1158.00150 NFG2B150L 2374.00 HFG2B150L 4240.00 LFG2B150L 5751.00 CFT2B150 1158.00175 NFG2B175L 2374.00 HFG2B175L 4240.00 LFG2B175L 5751.00 CFT2B175 1158.00200 NFG2B200L 2374.00 HFG2B200L 4240.00 LFG2B200L 5751.00 CFT2B200 1158.00225 NFG2B225L 2374.00 HFG2B225L 4240.00 LFG2B225L 5751.00 CFT2B225 1158.00250 NFG2B250L 2999.00 HFG2B250L 4865.00 LFG2B250L 6376.00 CFT2B250 1783.00N-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNFG3F250 1388.00 HFG3F250 3493.00 LFG3F250 4971.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLY100 NFG3B100L 2882.00 HFG3B100L 4987.00 LFG3B100L 6465.00 CFT3B100 1362.00110 NFG3B110L 2882.00 HFG3B110L 4987.00 LFG3B110L 6465.00 CFT3B110 1362.00125 NFG3B125L 2882.00 HFG3B125L 4987.00 LFG3B125L 6465.00 CFT3B125 1362.00150 NFG3B150L 2882.00 HFG3B150L 4987.00 LFG3B150L 6465.00 CFT3B150 1362.00175 NFG3B175L 2882.00 HFG3B175L 4987.00 LFG3B175L 6465.00 CFT3B175 1362.00200 NFG3B200L 2882.00 HFG3B200L 4987.00 LFG3B200L 6465.00 CFT3B200 1362.00225 NFG3B225L 2882.00 HFG3B225L 4987.00 LFG3B225L 6465.00 CFT3B225 1362.00250 NFG3B250L 3617.00 HFG3B250L 5722.00 LFG3B250L 7200.00 CFT3B250 2097.00N-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNFG4F250 1805.00 HFG4F250 4542.00 LFG4F250 6463.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLY100 NFG4B100L 3752.00 HFG4B100L 6489.00 LFG4B100L 8410.00 CFT4B100 1771.00110 NFG4B110L 3752.00 HFG4B110L 6489.00 LFG4B110L 8410.00 CFT4B110 1771.00125 NFG4B125L 3752.00 HFG4B125L 6489.00 LFG4B125L 8410.00 CFT4B125 1771.00150 NFG4B150L 3752.00 HFG4B150L 6489.00 LFG4B150L 8410.00 CFT4B150 1771.00175 NFG4B175L 3752.00 HFG4B175L 6489.00 LFG4B175L 8410.00 CFT4B175 1771.00200 NFG4B200L 3752.00 HFG4B200L 6489.00 LFG4B200L 8410.00 CFT4B200 1771.00225 NFG4B225L 3752.00 HFG4B225L 6489.00 LFG4B225L 8410.00 CFT4B225 1771.00250 NFG4B250L 4707.00 HFG4B250L 7444.00 LFG4B250L 9365.00 CFT4B250 2726.00I i1750AMPS2000In =250A40? CTRIP UNIT/DISPARADOR 525Type / Tipo CFT3Cat. No. - CFT3B2506MOLDED CASECIRCUIT BREAKERSA - Consult with Siemens for availability.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-101

VL Circuit BreakersFG 250A Electronic 3-Knob & LCD Trip UnitsSelectionModel 545 Trip Units6FG 250A Frame 3-Pole Electronic Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNFG3F250 1388.00 HFG3F250 3493.00 LFG3F250 4971.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLYELECTRONIC LI TRIP100 NFG3N100L 3325.00 HFG3N100L 5430.00 LFG3N100L 6908.00 CFT3N100 1805.00150 NFG3N150L 3325.00 HFG3N150L 5430.00 LFG3N150L 6908.00 CFT3N150 1805.00250 NFG3N250L 4060.00 HFG3N250L 6165.00 LFG3N250L 7643.00 CFT3N250 2540.00ELECTRONIC LSI TRIP100 NFG3P100L 3659.00 HFG3P100L 5764.00 LFG3P100L 7242.00 CFT3P100 2139.00150 NFG3P150L 3659.00 HFG3P150L 5764.00 LFG3P150L 7242.00 CFT3P150 2139.00250 NFG3P250L 4393.00 HFG3P250L 6498.00 LFG3P250L 7976.00 CFT3P250 2873.00ELECTRONIC LSIG TRIP100 NFG3U100L 5540.00 HFG3U100L 7645.00 LFG3U100L 9123.00 CFT3U100 4020.00150 NFG3U150L 5540.00 HFG3U150L 7645.00 LFG3U150L 9123.00 CFT3U150 4020.00250 NFG3U250L 6273.00 HFG3U250L 8378.00 LFG3U250L 9856.00 CFT3U250 4753.00ELECTRONIC LIG TRIP100 NFG3X100L 5206.00 HFG3X100L 7311.00 LFG3X100L 8789.00 CFT3X100 3686.00150 NFG3X150L 5206.00 HFG3X150L 7311.00 LFG3X150L 8789.00 CFT3X150 3686.00250 NFG3X250L 5941.00 HFG3X250L 8046.00 LFG3X250L 9524.00 CFT3X250 4421.00MOLDED CASECIRCUIT BREAKERSModel 576 Trip UnitFG 250A Frame 3-Pole Electronic LCD Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNFG3F250 1388.00 HFG3F250 3493.00 LFG3F250 4971.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLYLCD ELECTRONIC LSI TRIP100 NFG3D100L 3980.00 HFG3D100L 6085.00 LFG3D100L 7563.00 CFT3D100 2460.00150 NFG3D150L 3980.00 HFG3D150L 6085.00 LFG3D150L 7563.00 CFT3D150 2460.00250 NFG3D250L 4825.00 HFG3D250L 6930.00 LFG3D250L 8408.00 CFT3D250 3305.00LCD ELECTRONIC LSIG TRIP100 NFG3E100L 5861.00 HFG3E100L 7966.00 LFG3E100L 9444.00 CFT3E100 4341.00150 NFG3E150L 5861.00 HFG3E150L 7966.00 LFG3E150L 9444.00 CFT3E150 4341.00250 NFG3E250L 6705.00 HFG3E250L 8810.00 LFG3E250L 10288.00 CFT3E250 5185.006-102Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

VL Circuit BreakersInternal Accessories for DG 150A and FG 250A FramesAuxiliary Switch and Alarm Switch Combination KitsDescription Mounting Pocket Catalog Number List Price $1 Alarm Switch1A/B Left, Right ASKL1 265.00Bases AMBL2 & AMBL32 Aux. Switches1A + 1B Left, Right, Neutral ASKL2 265.00Bases AMBL12 Aux. + 1 Alarm Switches1A + 1B, 1A/B Left, Right ASKL3 530.00Bases AMBL2 & AMBL3SelectionAuxiliary/Alarm Switch Mounting Base OnlyDescription Mounting Pocket Catalog Number List Price $Up to 3 Auxiliary Switches Left, Right, Neutral AMBL1 61.002 Aux. + 1 Alarm Switch Left Pocket Only AMBL2 61.002 Aux. + 1 Alarm Switch Right Pocket Only AMBL3 61.00Auxiliary/Alarm Switch OnlyCommon to DG - PG FramesDescription Catalog Number List Price $1 Normally Open Contact (1A) ASWPA 108.001 Normally Closed Contact (1B) ASWPB 108.00Shunt TripsDescription Mounting Pocket Catalog Number List Price $24 VDC STRLB24DC 594.0048-60 VDC STRLC60DC 594.00110-127 VDC STRLD125DC 594.00220-250 VDC Right Pocket Only STRLE250DC 594.0048-60 VAC STRLM60 594.00110-127 VAC STRLN120 594.00208-277 VAC STRLS277 594.00380-600 VAC STRLV600 594.00Undervoltage ReleaseDescription Mounting Pocket Catalog Number List Price $12 VDC UVRLA12DC 594.0024 VDC UVRLB24DC 594.0048 VDC UVRLC48DC 594.0060 VDC UVRLG60DC 594.00110-127 VDC UVRLD125DC 594.00220-250 VDC UVRLE250 594.00110-127 VAC Right Pocket Only UVRLN120 594.00220-240 VAC UVRLR240 594.00208 VAC UVRLP208 594.00277 VAC UVRLS277 594.00380-415 VAC UVRLT415 594.00440-480 VAC UVRLU480 594.00600 VAC UVRLV600 594.006MOLDED CASECIRCUIT BREAKERS‘A’ refers to a normally open contact (open when the breaker contacts are open).‘B’ refers to a normally closed contact (closed when the breaker contacts are open). Refer to the “Accessory Locations” chart for guidelines and limitations about which pockets may be used for accessorycombinations. These kits include two bases, one for mounting switches in the left pocket and another for mounting in the right. Includes 1A and 1B contact for alarm purposes, only one of which may be installed at any time.External Accessories pages 6-125 through 6-139Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-103

6MOLDED CASECIRCUIT BREAKERSVL Circuit BreakersJG 400A Frame, VL SeriesOrdering InformationComplete Assembled BreakerPrices for a complete factory assembled JG breaker include the frame, tripunit, and standard line and load connectors, all factory installed and shippedas a complete breaker. Assembled breakers are available only withstandard connectors.For any other configuration, order the frame, trip unit, and terminals asseparate items.For DC applications, use thermal magnetic trip unit only.For reverse feed applications, select non-interchangeable trip breakers only. Fornon-interchangeable trip breakers, change the third digit of the catalog numberto “X” for standard breakers.100% Rated: For 100% rated breakers (or frames) with an interchangeable tripunit, change the 3 rd character of the catalog name to ”H”.For 100% rated breakers with a non-interchangeable trip unit, change the 3 rdcharacter of the catalog number to ”Y“.For 50˚C and special applications, refer to page 6-144. AMounting hardware is included with each frame or complete breaker.Interrupting RatingsRMS Symmetrical Amperes (KA)UL 489 AIR (File E10848) IEC 60947-2Volts AC (50/60 Hz) Volts DC Volts AC (50/60 Hz)Breaker 220/240 380/415 690Type 240 480 600 250 500 ICU ICS ICU ICS ICU ICSNJG 65 35 25 30 25 65 65 45 45 12 6HJG 100 65 25 30 35 100 75 70 70 15 8LJG 200 100 25 30 35 200 150 100 75 15 8Connectors for 75°C WireAmpere Wire No. of cables Catalog ListConstruction Rating Range per connector Number Price $Steel 70-400 1/0–600 kcmil Cu 1 3TW1JG600 87.00Aluminum 70-400 3/0–250 kcmil Al/Cu 2 3TA2JG250 87.00Aluminum 70-400 250–750 kcmil Al 1 3TA1JG750 109.00Aluminum 70-400 3/0–600 kcmil Cu 1 3TA1JG750 109.00Copper 70-400 3/0–750 kcmil Cu 1 TC1JG750 77.00Copper 70-400 3/0–250 kcmil Cu 2 TC2JG250 77.00Distribution Lugs70-400 #14–4 Cu 12 3TA12JG04 265.0070-400 #14–2/0 Cu 6 3TA6JG20 265.00Compression Lugs70-400 250–600 kcmil Al/Cu – 3CLJ600 449.0070-400 #6–350 kcmil – 3CLJ350 449.0070-400 250–750 kcmil – 3CLJ750 449.00 Standard construction supplied for each breaker. Kit consists of 3 terminal connectors. 3 Lugs for 3-pole breakers. For 100% rate applications, 90°C.Selection/DimensionsDimensions, inches (mm)NumberTo Handleof Poles Width Length Depth D12, 3 5.5 (139)11 (279) 4.2 (102) 5.4 (138)4 7.2 (183)Shipping Weight, lbs. (kg)Trip Unit CompletePoles Frame Thermal-Mag. Electronic Breaker2, 3 9.3 (4.2) 4.0 (1.8) 4.0 (1.8) 12.6 (5.7)4 12.1 (5.5) 5.0 (2.3) 5.0 (2.3) 16.3 (7.4)Enclosures AListNEMA Class Catalog Number Price $1 JG0401S CSO1 (Compact) JG0401SC CSO3R JG0403R CSO3R (Compact) JG0403RC CSO7-9 JG03579 (350A max) CSO12 JG04012 CSONeutral (future) —JG Thermal-Magnetic,InstantaneousTrip Adjustment RangeInstantaneousTrip Unit Continuous Overcurrent Setting (I i )Amp Rating (I n ) Min. Max.250 1250 2500300 1500 3000350 1750 3500400 2000 4000Note: Each breaker has 6 trip settings in this range.A - Consult with Siemens for availability.External Accessories pages 6-125 through 6-1396-104Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

M4-PAN-TORXM4-PAN-TORXVL Circuit BreakersJG 400A Thermal-Magnetic Trip UnitSelection28002400I iAMPS320036002000 4000I n= 400A40 CTM ~Trip Unit/Disparador 525JG 400A Frame 2-Pole with Thermal-Magnetic Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNJG2F400 1600.00 HJG2F400 3842.00 LJG2F400 5208.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLY250 NJG2B250L 3210.00 HJG2B250L 5452.00 LJG2B250L 6818.00 CJT2B250 1494.00300 NJG2B300L 3210.00 HJG2B300L 5452.00 LJG2B300L 6818.00 CJT2B300 1494.00350 NJG2B350L 3210.00 HJG2B350L 5452.00 LJG2B350L 6818.00 CJT2B350 1494.00400 NJG2B400L 3210.00 HJG2B400L 5452.00 LJG2B400L 6818.00 CJT2B400 1494.00JG 400A Frame 3-Pole with Thermal-Magnetic Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNJG3F400 1972.00 HJG3F400 4484.00 LJG3F400 5740.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLY250 NJG3B250L 3903.00 HJG3B250L 6415.00 LJG3B250L 7671.00 CJT3B250 1757.00300 NJG3B300L 3903.00 HJG3B300L 6415.00 LJG3B300L 7671.00 CJT3B300 1757.00350 NJG3B350L 3903.00 HJG3B350L 6415.00 LJG3B350L 7671.00 CJT3B350 1757.00400 NJG3B400L 3903.00 HJG3B400L 6415.00 LJG3B400L 7671.00 CJT3B400 1757.00JG 400A Frame 4-Pole with Thermal-Magnetic Trip Unit AN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNJG4F400 2563.00 HJG4F400 5829.00 LJG4F400 7462.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLY250 NJG4B250L 5080.00 HJG4B250L 8346.00 LJG4B250L 9979.00 CJT4B250 2285.00300 NJG4B300L 5080.00 HJG4B300L 8346.00 LJG4B300L 9979.00 CJT4B300 2285.00350 NJG4B350L 5080.00 HJG4B350L 8346.00 LJG4B350L 9979.00 CJT4B350 2285.00400 NJG4B400L 5080.00 HJG4B400L 8346.00 LJG4B400L 9979.00 CJT4B400 2285.00JJ 400A Frame 240V max., 2-pole with Thermal-Magnetic Non-Interchangeable Trip UnitN-Interrupting ClassCatalogListContinuous Number Price $Ampere RatingCOMPLETE BREAKER250 NJJ2B250L 2642.00300 NJJ2B300L 2642.00350 NJJ2B350L 2642.00400 NJJ2B400L 2642.00N-Interrupting ClassCatalogListContinuous Number Price $Ampere RatingCOMPLETE BREAKER250 NJJ3B250L 3192.00300 NJJ3B300L 3192.00350 NJJ3B350L 3192.00400 NJJ3B400L 3192.00Model 525 Trip UnitJJ 400A Frame 240V max., 3-pole with Thermal-Magnetic Non-Interchangeable Trip Unit6MOLDED CASECIRCUIT BREAKERSA - Consult with Siemens for availability.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-105

VL Circuit BreakersJG 400A Electronic 3-Knob & LCD Trip UnitsSelectionJG 400A Frame 3-Pole Electronic Trip UnitModel 545 Trip UnitsN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNJG3F400 1972.00 HJG3F400 4484.00 LJG3F400 5740.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLYELECTRONIC LI TRIP250 NJG3N250L 4468.00 HJG3N250L 6980.00 LJG3N250L 8236.00 CJT3N250 2322.00400 NJG3N400L 4468.00 HJG3N400L 6980.00 LJG3N400L 8236.00 CJT3N400 2322.00ELECTRONIC LSI TRIP250 NJG3P250L 4800.00 HJG3P250L 7312.00 LJG3P250L 8568.00 CJT3P250 2654.00400 NJG3P400L 4800.00 HJG3P400L 7312.00 LJG3P400L 8568.00 CJT3P400 2654.00ELECTRONIC LSIG TRIP250 NJG3U250L 6682.00 HJG3U250L 9194.00 LJG3U250L 10450.00 CJT3U250 4536.00400 NJG3U400L 6682.00 HJG3U400L 9194.00 LJG3U400L 10450.00 CJT3U400 4536.00ELECTRONIC LIG TRIP250 NJG3X250L 6347.00 HJG3X250L 8859.00 LJG3X250L 10115.00 CJT3X250 4201.00400 NJG3X400L 6347.00 HJG3X400L 8859.00 LJG3X400L 10115.00 CJT3X400 4201.00MOLDED CASECIRCUIT BREAKERS6Model 576 Trip UnitJG 400A Frame 3-Pole Electronic LCD Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNJG3F400 1972.00 HJG3F400 4484.00 LJG3F400 5740.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLYLCD ELECTRONIC LSI TRIP250 NJG3D250L 5198.00 HJG3D250L 7710.00 LJG3D250L 8966.00 CJT3D250 3052.00400 NJG3D400L 5198.00 HJG3D400L 7710.00 LJG3D400L 8966.00 CJT3D400 3052.00LCD ELECTRONIC LSIG TRIP250 NJG3E250L 7080.00 HJG3E250L 9592.00 LJG3E250L 10848.00 CJT3E250 4934.00400 NJG3E400L 7080.00 HJG3E400L 9592.00 LJG3E400L 10848.00 CJT3E400 4934.006-106Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

VL Circuit BreakersInternal Accessories for JG 400A and LG 600A FramesAuxiliary Switch and Alarm Switch Combination KitsDescription Mounting Pocket Catalog Number List Price $1 Alarm Switch1A/B Left, Right ASKL1 265.00Bases AMBL2 & AMBL32 Aux. Switches1A + 1B Left, Right, Neutral ASKL2 265.00Bases AMBL12 Aux. + 1 Alarm Switches1A + 1B, 1A/B Left, Right ASKL3 530.00Bases AMBL2 & AMBL3Auxiliary/Alarm Switch Mounting Base OnlyDescription Mounting Pocket Catalog Number List Price $Up to 3 Auxiliary Switches Left, Right, Neutral AMBL1 61.002 Aux. + 1 Alarm Switch Left Pocket Only AMBL2 61.002 Aux. + 1 Alarm Switch Right Pocket Only AMBL3 61.00Auxiliary/Alarm Switch OnlyCommon to DG - PG FramesSelectionDescription Catalog Number List Price $1 Normally Open Contact (1A) ASWPA 108.001 Normally Closed Contact (1B) ASWPB 108.00Shunt TripsDescription Mounting Pocket Catalog Number List Price $24 VDC STRLB24DC 594.0048-60 VDC STRLC60DC 594.00110-127 VDC STRLD125DC 594.00220-250 VDC Right Pocket Only STRLE250DC 594.0048-60 VAC STRLM60 594.00110-127 VAC STRLN120 594.00208-277 VAC STRLS277 594.00380-600 VAC STRLV600 594.00Undervoltage ReleaseDescription Mounting Pocket Catalog Number List Price $12 VDC UVRLA12DC 594.0024 VDC UVRLB24DC 594.0048 VDC UVRLC48DC 594.0060 VDC UVRLG60DC 594.00110-127 VDC UVRLD125DC 594.00220-250 VDC UVRLE250DC 594.00110-127 VAC Right Pocket Only UVRLN120 594.00220-240 VAC UVRLR240 594.00208 VAC UVRLP208 594.00277 VAC UVRLS277 594.00380-415 VAC UVRLT415 594.00440-480 VAC UVRLU480 594.00600 VAC UVRLV600 594.006MOLDED CASECIRCUIT BREAKERS‘A’ refers to a normally open contact (open when the breaker contacts are open).‘B’ refers to a normally closed contact (closed when the breaker contacts are open). Refer to the “Accessory Locations” chart for guidelines and limitations about which pockets may be used for accessorycombinations. Includes 1A and 1B contact for alarm purposes, only one of which may be installed at any time.External Accessories pages 6-125 through 6-139Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-107

VL Circuit BreakersLG 600A Frame, VL SeriesOrdering InformationComplete Assembled BreakerPrices for a complete factory assembled LG breaker include the frame, trip unit,and standard line and load lugs, all factory installed and shipped as a completebreaker. Assembled breakers are available only with standard connectors.For any other configuration, order the frame, trip unit, and terminals asseparate items.For DC applications, use thermal magnetic trip unit only.For reverse feed applications, select non-interchangeable trip breakers only.Change the third digit of the catalog number to “X” for non-interchangeabletrip unit.For 50˚C and special applications, refer to page 6-144. AMounting hardware is included with each frame or complete breaker.A Toggle Handle Extension is included with each frame or complete breaker.Selection/Dimensions6MOLDED CASECIRCUIT BREAKERSInterrupting RatingsRMS Symmetrical Amperes (KA)UL 489 IEC 60947-2Volts AC (50/60 Hz Volts DC Volts AC (50/60 Hz)Breaker 220/240 380/415 690Type 240 480 600 250 500 ICU ICS ICU ICS ICU ICSNLG 65 35 25 30 25 65 65 45 45 12 6HLG 100 65 25 30 35 100 75 70 70 15 8LLG 200 100 25 30 35 200 150 100 75 15 8Connectors for 75°C WireAmpere Wire No. of cables Catalog ListConstruction Rating Range per connector Number Price $Aluminum 150-600 #2/0–600 kcmil Al/Cu 2 (load side) 3TA2LG600LD 109.00Aluminum 150-600 #2/0–600 kcmil Al/Cu 2 (line side) 3TA2LG600LN 109.00Copper 150-600 #2/0–600 kcmil Cu 2 (load side) 3TC2LG600LD 231.00Copper 150-600 #2/0–600 kcmil Cu 2 (line side) 3TC2LG600LN 231.00Compression Lugs150-600 #6–350 kcmil Al/Cu – 6CLL350 899.00150-600 250-750 kcmil Al/Cu – 3CLL750 494.00150-600 250-600 kcmil Al/Cu – 6CLL600 899.00 Standard construction supplied for each breaker. Kit consists of 3 terminal connectors. Kit consists of 6 lugs for Line or Load end. Kit consists of 3 lugs for Line or Load end.LG Thermal-Magnetic,InstantaneousTrip Adjustment RangeInstantaneousTrip Unit Continuous Overcurrent Setting (I i )Amp Rating (I n ) Min. Max.400 2000 4000500 2500 5000600 2750 5500Note: Each breaker has 6 trip settings.Dimensions, inches (mm)NumberTo Handleof Poles Width Length Depth D12, 3 5.5 (139)11 (279) 4.2 (102) 5.4 (138)4 7.2 (183)Ext. 13.6Shield (345.5)Shipping Weight, lbs. (kg)Trip Unit CompletePoles Frame Thermal-Mag. Electronic Breaker2, 3 17.4 (7.9) 3.5 (1.6) 4.2 (1.9) 20.9 (9.5)4 23.2 (10.5) 4.6 (2.1) 5.5 (2.5) 27.8 (12.6)Enclosures AListNEMA Class Catalog Number Price $1 LG0601S CSO3R LG0603R CSO4 – 4X LG0604S CSO7-9 LG06079 CSO12 LG06012 CSONeutral (future) —A - Consult with Siemens for availability.External Accessories pages 6-125 through 6-1396-108Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

M4-PAN-TORXM4-PAN-TORXVL Circuit BreakersLG 600A Thermal-Magnetic Trip UnitSelection38503300I i440049502750 5500I n= 600A40 CTM ~Trip Unit/Disparador 525Type/Tipo CLT3Cat. No. CLT3B600LG 600A Frame 2-Pole with Thermal-Magnetic Trip UnitModel 525 Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNLG2F600 2869.00 HLG2F600 4023.00 LLG2F600 6809.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLY400 NLG2B400L 5148.00 HLG2B400L 6302.00 LLG2B400L 9088.00 CLT2B400 2135.00500 NLG2B500L 5148.00 HLG2B500L 6302.00 LLG2B500L 9088.00 CLT2B500 2135.00600 NLG2B600L 5148.00 HLG2B600L 6302.00 LLG2B600L 9088.00 CLT2B600 2135.00LG 600A Frame 3-Pole with Thermal-Magnetic Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNLG3F600 3548.00 HLG3F600 4684.00 LLG3F600 7508.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLY400 NLG3B400L 6276.00 HLG3B400L 7412.00 LLG3B400L 10236.00 CLT3B400 2512.00500 NLG3B500L 6276.00 HLG3B500L 7412.00 LLG3B500L 10236.00 CLT3B500 2512.00600 NLG3B600L 6276.00 HLG3B600L 7412.00 LLG3B600L 10236.00 CLT3B600 2512.006MOLDED CASECIRCUIT BREAKERSDiscount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-109

VL Circuit BreakersLG 600A Electronic 3-Knob & LCD Trip UnitsSelectionLG 600A Frame 3-Pole Electronic Trip UnitModel 545 Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNLG3F600 3548.00 HLG3F600 4684.00 LLG3F600 7508.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLYELECTRONIC LI TRIP400 NLG3N400L 6865.00 HLG3N400L 8001.00 LLG3N400L 10825.00 CLT3N400 3101.00600 NLG3N600L 6865.00 HLG3N600L 8001.00 LLG3N600L 10825.00 CLT3N600 3101.00ELECTRONIC LSI TRIP400 NLG3P400L 7200.00 HLG3P400L 8336.00 LLG3P400L 11160.00 CLT3P400 3436.00600 NLG3P600L 7200.00 HLG3P600L 8336.00 LLG3P600L 11160.00 CLT3P600 3436.00ELECTRONIC LSIG TRIP400 NLG3U400L 9128.00 HLG3U400L 10264.00 LLG3U400L 13088.00 CLT3U400 5364.00600 NLG3U600L 9128.00 HLG3U600L 10264.00 LLG3U600L 13088.00 CLT3U600 5364.00ELECTRONIC LIG TRIP400 NLG3X400L 8794.00 HLG3X400L 9930.00 LLG3X400L 12754.00 CLT3X400 5030.00600 NLG3X600L 8794.00 HLG3X600L 9930.00 LLG3X600L 12754.00 CLT3X600 5030.006MOLDED CASECIRCUIT BREAKERSModel 576 Trip UnitLG 600A Frame 3-Pole Electronic LCD Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNLG3F600 3548.00 HLG3F600 4684.00 LLG3F600 7508.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLYLCD ELECTRONIC LSI TRIP400 NLG3D400L 7714.00 HLG3D400L 8850.00 LLG3D400L 11674.00 CLT3D400 3950.00600 NLG3D600L 7714.00 HLG3D600L 8850.00 LLG3D600L 11674.00 CLT3D600 3950.00LCD ELECTRONIC LSIG TRIP400 NLG3E400L 9643.00 HLG3E400L 10779.00 LLG3E400L 13603.00 CLT3E400 5879.00600 NLG3E600L 9643.00 HLG3E600L 10779.00 LLG3E600L 13603.00 CLT3E600 5879.006-110Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

VL Circuit BreakersInternal Accessories for JG 400A and LG 600A FramesAuxiliary Switch and Alarm Switch Combination KitsDescription Mounting Pocket Catalog Number List Price $1 Alarm Switch1A/B Left, Right ASKL1 265.00Bases AMBL2 & AMBL32 Aux. Switches1A + 1B Left, Right, Neutral ASKL2 265.00Bases AMBL12 Aux. + 1 Alarm Switches1A + 1B, 1A/B Left, Right ASKL3 530.00Bases AMBL2 & AMBL3SelectionAuxiliary/Alarm Switch Mounting Base OnlyDescription Mounting Pocket Catalog Number List Price $Up to 3 Auxiliary Switches Left, Right, Neutral AMBL1 61.002 Aux. + 1 Alarm Switch Left Pocket Only AMBL2 61.002 Aux. + 1 Alarm Switch Right Pocket Only AMBL3 61.00Auxiliary/Alarm Switch OnlyCommon to DG - PG FramesDescription Catalog Number List Price $1 Normally Open Contact (1A) ASWPA 108.001 Normally Closed Contact (1B) ASWPB 108.00Shunt TripsDescription Mounting Pocket Catalog Number List Price $24 VDC STRLB24DC 594.0048-60 VDC STRLC60DC 594.00110-127 VDC STRLD125DC 594.00220-250 VDC Right Pocket Only STRLE250DC 594.0048-60 VAC STRLM60 594.00110-127 VAC STRLN120 594.00208-277 VAC STRLS277 594.00380-600 VAC STRLV600 594.00Undervoltage ReleaseDescription Mounting Pocket Catalog Number List Price $12 VDC UVRLA12DC 594.0024 VDC UVRLB24DC 594.0048 VDC UVRLC48DC 594.0060 VDC UVRLG60DC 594.00110-127 VDC UVRLD125DC 594.00220-250 VDC UVRLE250DC 594.00110-127 VAC Right Pocket Only UVRLN120 594.00220-240 VAC UVRLR240 594.00208 VAC UVRLP208 594.00277 VAC UVRLS277 594.00380-415 VAC UVRLT415 594.00440-480 VAC UVRLU480 594.00600 VAC UVRLV600 594.006MOLDED CASECIRCUIT BREAKERS‘A’ refers to a normally open contact (open when the breaker contacts are open).‘B’ refers to a normally closed contact (closed when the breaker contacts are open). Refer to the “Accessory Locations” chart for guidelines and limitations about which pockets may be used for accessorycombinations. Includes 1A and 1B contact for alarm purposes, only one of which may be installed at any time.External Accessories pages 6-125 through 6-139Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-111

6MOLDED CASECIRCUIT BREAKERSVL Circuit BreakersMG 800A Frame, VL SeriesOrdering InformationComplete Assembled BreakerPrices for a complete factory assembled MG breaker include the frame, tripunit, and standard line and load lugs, all factory installed and shipped as acomplete breaker. Assembled breakers are available only with standardconnectors.For any other configuration, order the frame, trip unit, and terminals asseparate items.For DC applications, use thermal magnetic trip unit only.For reverse feed applications, select non-interchangeable trip breakers only. Fornon-interchangeable trip breakers, change the third digit of the catalog numberto “X” for standard breakers.100% Rated: For 100% rated breakers (or frames) with an interchangeable tripunit, change the 3 rd character of the catalog name to ”H”.For 100% rated breakers with a non-interchangeable trip unit, change the 3 rdcharacter of the catalog number to ”Y“.For 50˚C and special applications, refer to page 6-144. AMounting hardware is included with each frame or complete breaker.A Toggle Handle Extension is included with each frame or complete breaker.Interrupting RatingsRMS Symmetrical Amperes (KA)UL 489 IEC 60947-2Volts AC (50/60 Hz) Volts DC Volts AC (50/60 Hz)Breaker 220/240 380/415 690Type 240 480 600 250 500 ICU ICS ICU ICS ICU ICSNMG 65 35 25 22 35 65 65 50 50 20 10HMG 100 65 35 25 50 100 75 70 70 30 15LMG 200 100 50 42 65 200 150 100 75 35 17Connectors for 75°C WireAmpere Wire No. of cables Catalog ListConstruction Rating Range per connector Number Price $Aluminum 200-800A 1/0–500 kcmil Al/Cu 3 3TA3MG500 202.00Aluminum 200-800A 500-750 kcmil Al/Cu 2 3TA2MG750 364.00Copper 200-800A 1/0–500 kcmil Cu 3 TC3MG500 134.00Aluminum 200-800A #2–600 kcmil Al/Cu 3 3TA3MG600 218.00Compression Lug Kit 200-800A 1/0–500 kcmil Cu – 9CLM500 1056.00 Total of 9 connectors (3 per phase Line or Load). Kit consists of 3 terminal connectors. Standard connector supplied with complete breakers. Includes extended terminal cover. Consists of one terminal. For 100% rated applications.Selection/DimensionsDimensions, inches (mm)NumberTo Handleof Poles Width Length Depth D12, 3 7.5 (190)16 (406) 4.5 (114) 5.9 (151)4 10 (253)Shipping Weight, lbs. (kg)CompletePoles Frame Trip Unit Breaker2, 3 31.3 (14.2) 4.0 (1.8) 35.3 (16.0)4 40.2 (18.2) 5.0 (2.3) 45.2 (20.5)Enclosures AListNEMA Class Catalog Number Price $1 MG0801S CSO3R MG0803R CSONeutral (future) —MG Thermal-Magnetic,InstantaneousTrip Adjustment RangeInstantaneousTrip Unit Continuous Overcurrent Setting (I i )Amp Rating (I n ) Min. Max.600 3000 6000700 3250 6500800 3250 6500Note: Each breaker has 6 trip settings.A - Consult with Siemens for availability.External Accessories pages 6-125 through 6-1396-112Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

AMPS4550 520039005850VL Circuit BreakersMG 800A Thermal-Magnetic Trip UnitSelectionI i3250 6500I n= 800A40 CTM ~Trip Unit/Disparador 525MG 800A Frame 2-Pole with Thermal-Magnetic Trip UnitModel 525 Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNMG2F800 3502.00 HMG2F800 5208.00 LMG2F800 8238.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLY600 NMG2B600L 6456.00 HMG2B600L 8162.00 LMG2B600L 11192.00 CMT2B600 2686.00700 NMG2B700L 6456.00 HMG2B700L 8162.00 LMG2B700L 11192.00 CMT2B700 2686.00800 NMG2B800L 6456.00 HMG2B800L 8162.00 LMG2B800L 11192.00 CMT2B800 2686.00MG 800A Frame 3-Pole with Thermal-Magnetic Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNMG3F800 4305.00 HMG3F800 6033.00 LMG3F800 9039.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLY600 NMG3B600L 7868.00 HMG3B600L 9596.00 LMG3B600L 12602.00 CMT3B600 3161.00700 NMG3B700L 7868.00 HMG3B700L 9596.00 LMG3B700L 12602.00 CMT3B700 3161.00800 NMG3B800L 7868.00 HMG3B800L 9596.00 LMG3B800L 12602.00 CMT3B800 3161.006MOLDED CASECIRCUIT BREAKERSDiscount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-113

VL Circuit BreakersMG 800A Electronic 3-Knob & LCD Trip UnitsSelectionAlarm>1.05I r 315 350300400300500I sd 1.5 21.51.52.53t sd 2 V1.04.2 .3 I tSec. .1.4 OFF0.5X3680HG800700Amps6006307x I r 6 542 .4I t .3ON.1.2Active6MOLDED CASECIRCUIT BREAKERSMG 800A Frame 3-Pole Electronic Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNMG3F800 4305.00 HMG3F800 6033.00 LMG3F800 9039.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLYELECTRONIC LI TRIP600 NMG3N600L 8672.00 HMG3N600L 10400.00 LMG3N600L 13406.00 CMT3N600 3965.00800 NMG3N800L 8672.00 HMG3N800L 10400.00 LMG3N800L 13406.00 CMT3N800 3965.00ELECTRONIC LSI TRIP600 NMG3P600L 9006.00 HMG3P600L 10734.00 LMG3P600L 13740.00 CMT3P600 4299.00800 NMG3P800L 9006.00 HMG3P800L 10734.00 LMG3P800L 13740.00 CMT3P800 4299.00ELECTRONIC LSIG TRIP600 NMG3U600L 10935.00 HMG3U600L 12663.00 LMG3U600L 15669.00 CMT3U600 6228.00800 NMG3U800L 10935.00 HMG3U800L 12663.00 LMG3U800L 15669.00 CMT3U800 6228.00ELECTRONIC LIG TRIP600 NMG3X600L 10602.00 HMG3X600L 12330.00 LMG3X600L 15336.00 CMT3X600 5895.00800 NMG3X800L 10602.00 HMG3X800L 12330.00 LMG3X800L 15336.00 CMT3X800 5895.00MG 800A Frame 4-Pole Electronic Trip Unit AModel 545 Trip UnitsN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNMG4F800 5597.00 HMG4F800 7844.00 LMG4F800 11753.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLYELECTRONIC LI TRIP600 NMG4N600L 11289.00 HMG4N600L 13536.00 LMG4N600L 17445.00 CMT4N600 5156.00800 NMG4N800L 11289.00 HMG4N800L 13536.00 LMG4N800L 17445.00 CMT4N800 5156.00ELECTRONIC LSI TRIP600 NMG4P600L 11722.00 HMG4P600L 13969.00 LMG4P600L 17878.00 CMT4P600 5589.00800 NMG4P800L 11722.00 HMG4P800L 13969.00 LMG4P800L 17878.00 CMT4P800 5589.00ELECTRONIC LSIG TRIP600 NMG4U600L 14230.00 HMG4U600L 16477.00 LMG4U600L 20386.00 CMT4U600 8097.00800 NMG4U800L 14230.00 HMG4U800L 16477.00 LMG4U800L 20386.00 CMT4U800 8097.00ELECTRONIC LIG TRIP600 NMG4X600L 13796.00 HMG4X600L 16043.00 LMG4X600L 19952.00 CMT4X600 7663.00800 NMG4X800L 13796.00 HMG4X800L 16043.00 LMG4X800L 19952.00 CMT4X800 7663.00X3680JMA= 605 B= 612C= 615 N= 0MG 800A Frame 3-Pole Electronic LCD Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNMG3F800 4305.00 HMG3F800 6033.00 LMG3F800 9039.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLYLCD ELECTRONIC LSI TRIP600 NMG3D600L 9650.00 HMG3D600L 11378.00 LMG3D600L 14384.00 CMT3D600 4943.00800 NMG3D800L 9650.00 HMG3D800L 11378.00 LMG3D800L 14384.00 CMT3D800 4943.00LCD ELECTRONIC LSIG TRIP600 NMG3E600L 11581.00 HMG3E600L 13309.00 LMG3E600L 16315.00 CMT3E600 6874.00800 NMG3E800L 11581.00 HMG3E800L 13309.00 LMG3E800L 16315.00 CMT3E800 6874.00A - Consult with Siemens for availability.Model 576 Trip Unit6-114Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

VL Circuit BreakersInternal Accessories for MG 800A, NG 1200A and PG 1600A FramesAuxiliary Switch and Alarm Switch Combination KitsDescription Mounting Pocket Catalog Number List Price $2 Aux. + 2 Alarm Switches2A + 2B Left Pocket Only ASKP3 530.00Bases AMBP24 Aux. Switches2A + 2B Left, Right, Neutral ASKP4 495.00Bases AMBP1Selectionx4Auxiliary/Alarm Switch Mounting Base OnlyDescription Mounting Pocket Catalog Number List Price $Up to 4 Auxiliary Switches Left, Right, Neutral AMBP1 83.002 Aux. + 2 Alarm Switches Left Pocket Only AMBP2 83.00Auxiliary/Alarm Switch OnlyCommon to DG - PG FramesDescription Catalog Number List Price $1 Normally Open Contact (1A) ASWPA 108.001 Normally Closed Contact (1B) ASWPB 108.00Shunt TripsDescription Mounting Pocket Catalog Number List Price $24 VDC STRPB24DC 654.0048-60 VDC STRPC60DC 654.00110-127 VDC STRPD125DC 654.00220-250 VDC Right Pocket Only STRPE250DC 654.0048-60 VAC STRPM60 654.00110-127 VAC STRPN120 654.00208-277 VAC STRPS277 654.00380-600 VAC STRPV600 654.00Undervoltage ReleaseDescription Mounting Pocket Catalog Number List Price $12 VDC UVRPA12DC 654.0024 VDC UVRPB24DC 654.0048 VDC UVRPC48DC 654.0060 VDC UVRPG60DC 654.00110-127 VDC UVRPD125DC 654.00220-250 VDC UVRPE250DC 654.00110-127 VAC Right Pocket Only UVRPN120 654.00220-240 VAC UVRPR240 654.00208 VAC UVRPP208 654.00277 VAC UVRPS277 654.00380-415 VAC UVRPT415 654.00440-480 VAC UVRPU480 654.00600 VAC UVRPV600 654.00x46MOLDED CASECIRCUIT BREAKERS‘A’ refers to a normally open contact (open when the breaker contacts are open).‘B’ refers to a normally closed contact (closed when the breaker contacts are open). Refer to the “Accessory Locations” chart for guidelines and limitations about which pockets may be used for accessorycombinations.External Accessories pages 6-125 through 6-139Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-115

6MOLDED CASECIRCUIT BREAKERSVL Circuit BreakersNG 1200A Frame, VL SeriesOrdering InformationComplete Assembled Breaker with LugsPrices for a complete factory assembled NG breaker include the frame, trip unit,and standard line and load lugs, all factory installed and shipped as a completebreaker. Assembled breakers are available only with standard connectors.For any other configuration, order the frame, trip unit, and terminals asseparate items.For DC applications, use thermal magnetic trip unit only.For reverse feed applications, select non-interchangeable trip breakers only. Fornon-interchangeable trip breakers, change the third digit of the catalog numberto “X” for standard breakers.100% Rated: For 100% rated breakers (or frames) with an interchangeable tripunit, change the 3 rd character of the catalog name to ”H”.For 100% rated breakers with a non-interchangeable trip unit, change the 3 rdcharacter of the catalog number to ”Y“.For 50˚C and special applications, refer to page 6-144. AMounting hardware is included with each frame or complete breaker.A Toggle Handle Extension is included with each frame or complete breaker.Interrupting RatingsRMS Symmetrical Amperes (KA)UL 489 IEC 60947-2Volts AC (50/60 Hz) Volts DC Volts AC (50/60 Hz)Breaker 220/240 380/415 690Type 240 480 600 250 500 ICU ICS ICU ICS ICU ICSNNG 65 35 25 22 35 65 35 50 25 20 10HNG 100 65 35 25 50 100 50 70 35 30 15LNG 200 100 65 42 65 200 100 100 50 35 17Connectors for 75°C WireAmpere Wire No. of cables Catalog ListConstruction Rating Range per connector Number Price $Aluminum 300-1200A 1/0–500 kcmil Al/Cu 4 3TA4NG500 291.00Aluminum 300-1200A 500-750 kcmil Al/Cu 3 3TA3NG750 832.00Copper 300-1200A 1/0–500 kcmil Cu 4 3TC4NG500 832.00Aluminum 300-1200A 1/0–500 kcmil Al/Cu 4 3TA4NG500H 875.00Compression Lug Kit 300-1200A 1/0–500 kcmil Al/Cu – 12CLN500 1393.00 Total of 12 connectors (4 per phase Line or Load). 90 °C for 100% rated breakers. Standard connector provided with complete breakers. Kit consists of 3 terminal connectors.Enclosures ASelection/DimensionsDimensions, inches (mm)NumberTo Handleof Poles W L D D12, 3 9 (229)4 12 (305)16 (406) 6 (152) 8.1 (207)Shipping Weight, lbs. (kg)CompletePoles Frame Trip Unit Breaker2, 3 46.3 (21.0) 8.8 (4.0) 55.1 (25.0)4 60.6 (27.5) 13.2 (6.0) 73.8 (33.5)Catalog ListType Number Price $1 NG1201S CSO3R NG1203R CSO12 NG12012 CSONeutral (future) —NG Thermal-Magnetic,InstantaneousTrip Adjustment RangeInstantaneousTrip Unit Continuous Overcurrent Setting (I i )Amp Rating (I n ) Min. Max.800 4000 8000900 5000 100001000 5000 100001200 7000 12000Note: Each breaker has 6 trip settings.A - Consult with Siemens for availability.External Accessories pages 6-125 through 6-1396-116Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

VL Circuit BreakersNG 1200A Thermal-Magnetic Trip UnitSelectionI iAMPS9000 10000800011000I n=1200A40 CTM ~I iAMPS9000 10000800011000I iAMPS9000 100008000110007000 12000Trip Unit/Disparador 5257000 12000Amps7000 12000AmpsNG 1200A Frame 2-Pole with Thermal-Magnetic Trip UnitModel 525 Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNNG2F120 5135.00 HNG2F120 6853.00 LNG2F120 10000.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLY800 NNG2B800L 10945.00 HNG2B800L 12663.00 LNG2B800L 15810.00 CNT2B800 5418.00900 NNG2B900L 10945.00 HNG2B900L 12663.00 LNG2B900L 15810.00 CNT2B900 5418.001000 NNG2B100L 10945.00 HNG2B100L 12663.00 LNG2B100L 15810.00 CNT2B100 5418.001200 NNG2B120L 10945.00 HNG2B120L 12663.00 LNG2B120L 15810.00 CNT2B120 5418.00NG 1200A Frame 3-Pole with Thermal-Magnetic Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNNG3F120 6321.00 HNG3F120 7937.00 LNG3F120 10960.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLY800 NNG3B800L 13284.00 HNG3B800L 14900.00 LNG3B800L 17923.00 CNT3B800 6375.00900 NNG3B900L 13284.00 HNG3B900L 14900.00 LNG3B900L 17923.00 CNT3B900 6375.001000 NNG3B100L 13284.00 HNG3B100L 14900.00 LNG3B100L 17923.00 CNT3B100 6375.001200 NNG3B120L 13284.00 HNG3B120L 14900.00 LNG3B120L 17923.00 CNT3B120 6375.006MOLDED CASECIRCUIT BREAKERSDiscount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-117

Trip Unit/Disparador545I n =1200 A ~Alarm>1.05X3I r 500 600t r 6 8I i 240 360400630410180 4804007002.5 14150 6001200800301712007201000 90025 201200 960AmpsSec.Amps x10ActiveV2.02VL Circuit BreakersNG 1200A Electronic 3-Knob & LCD Trip UnitsSelection2466MOLDED CASECIRCUIT BREAKERSModel 545 Trip UnitsNG 1200A Frame 3-Pole Electronic Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNNG3F120 6321.00 HNG3F120 7937.00 LNG3F120 10960.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLYELECTRONIC LI TRIP800 NNG3N800L 14651.00 HNG3N800L 16267.00 LNG3N800L 19290.00 CNT3N800 7742.001000 NNG3N100L 14651.00 HNG3N100L 16267.00 LNG3N100L 19290.00 CNT3N100 7742.001200 NNG3N120L 14651.00 HNG3N120L 16267.00 LNG3N120L 19290.00 CNT3N120 7742.00ELECTRONIC LSI TRIP800 NNG3P800L 14985.00 HNG3P800L 16601.00 LNG3P800L 19624.00 CNT3P800 8076.001000 NNG3P100L 14985.00 HNG3P100L 16601.00 LNG3P100L 19624.00 CNT3P100 8076.001200 NNG3P120L 14985.00 HNG3P120L 16601.00 LNG3P120L 19624.00 CNT3P120 8076.00ELECTRONIC LSIG TRIP800 NNG3U800L 16914.00 HNG3U800L 18530.00 LNG3U800L 21553.00 CNT3U800 10005.001000 NNG3U100L 16914.00 HNG3U100L 18530.00 LNG3U100L 21553.00 CNT3U100 10005.001200 NNG3U120L 16914.00 HNG3U120L 18530.00 LNG3U120L 21553.00 CNT3U120 10005.00ELECTRONIC LIG TRIP800 NNG3X800L 16581.00 HNG3X800L 18197.00 LNG3X800L 21220.00 CNT3X800 9672.001000 NNG3X100L 16581.00 HNG3X100L 18197.00 LNG3X100L 21220.00 CNT3X100 9672.001200 NNG3X120L 16581.00 HNG3X120L 18197.00 LNG3X120L 21220.00 CNT3X120 9672.00NG 1200A Frame 4-Pole Electronic Trip Unit AModel 576 Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNNG4F120 8218.00 HNG4F120 10319.00 LNG4F120 14249.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLYELECTRONIC LI TRIP800 NNG4N800L 19066.00 HNG4N800L 21167.00 LNG4N800L 25097.00 CNT4N800 10064.001000 NNG4N100L 19066.00 HNG4N100L 21167.00 LNG4N100L 25097.00 CNT4N100 10064.001200 NNG4N120L 19066.00 HNG4N120L 21167.00 LNG4N120L 25097.00 CNT4N120 10064.00ELECTRONIC LSI TRIP800 NNG4P800L 19501.00 HNG4P800L 21602.00 LNG4P800L 25532.00 CNT4P800 10499.001000 NNG4P100L 19501.00 HNG4P100L 21602.00 LNG4P100L 25532.00 CNT4P100 10499.001200 NNG4P120L 19501.00 HNG4P120L 21602.00 LNG4P120L 25532.00 CNT4P120 10499.00ELECTRONIC LSIG TRIP800 NNG4U800L 22009.00 HNG4U800L 24110.00 LNG4U800L 28040.00 CNT4U800 13007.001000 NNG4U100L 22009.00 HNG4U100L 24110.00 LNG4U100L 28040.00 CNT4U100 13007.001200 NNG4U120L 22009.00 HNG4U120L 24110.00 LNG4U120L 28040.00 CNT4U120 13007.00ELECTRONIC LIG TRIP800 NNG4X800L 21576.00 HNG4X800L 23677.00 LNG4X800L 27607.00 CNT4X800 12574.001000 NNG4X100L 21576.00 HNG4X100L 23677.00 LNG4X100L 27607.00 CNT4X100 12574.001200 NNG4X120L 21576.00 HNG4X120L 23677.00 LNG4X120L 27607.00 CNT4X120 12574.00NG 1200A Frame 3-Pole Electronic LCD Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNNG3F120 6321.00 HNG3F120 7937.00 LNG3F120 10960.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLYLCD ELECTRONIC LSI TRIP800 NNG3D800L 16196.00 HNG3D800L 17812.00 LNG3D800L 20835.00 CNT3D800 9287.001000 NNG3D100L 16196.00 HNG3D100L 17812.00 LNG3D100L 20835.00 CNT3D100 9287.001200 NNG3D120L 16196.00 HNG3D120L 17812.00 LNG3D120L 20835.00 CNT3D120 9287.00LCD ELECTRONIC LSIG 4-W TRIP800 NNG3E800L 18125.00 HNG3E800L 19741.00 LNG3E800L 22764.00 CNT3E800 11216.001000 NNG3E100L 18125.00 HNG3E100L 19741.00 LNG3E100L 22764.00 CNT3E100 11216.001200 NNG3E120L 18125.00 HNG3E120L 19741.00 LNG3E120L 22764.00 CNT3E120 11216.00A - Consult with Siemens for availability.6-118 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

VL Circuit BreakersInternal Accessories for MG 800A, NG 1200A, and PG 1600A FramesAuxiliary Switch and Alarm Switch Combination KitsDescription Mounting Pocket Catalog Number List Price $2 Aux. + 2 Alarm Switches2A + 2B Left Pocket Only ASKP3 530.00Base AMBP24 Aux. Switches2A + 2B Left, Right, Neutral ASKP4 495.00Base AMBP1Auxiliary/Alarm Switch Mounting Base OnlyDescription Mounting Pocket Catalog Number List Price $Up to 4 Auxiliary Switches Left, Right, Neutral AMBP1 83.002 Aux. + 2 Alarm Switches Left Pocket Only AMBP2 83.00Auxiliary/Alarm Switch OnlyCommon to DG-PG FramesDescription Catalog Number List Price $1 Normally Open Contact (1A) ASWPA 108.001 Normally Closed Contact (1B) ASWPB 108.00Selectionx4x4Shunt TripsDescription Mounting Pocket Catalog Number List Price $24 VDC STRPB24DC 654.0048-60 VDC STRPC60DC 654.00110-127 VDC STRPD125DC 654.00220-250 VDC Right Pocket Only STRPE250DC 654.0048-60 VAC STRPM60 654.00110-127 VAC STRPN120 654.00208-277 VAC STRPS277 654.00380-600 VAC STRPV600 654.00Undervoltage ReleaseDescription Mounting Pocket Catalog Number List Price $12 VDC UVRPA12DC 654.0024 VDC UVRPB24DC 654.0048 VDC UVRPC48DC 654.0060 VDC UVRPG60DC 654.00110-127 VDC UVRPD125DC 654.00220-250 VDC UVRPE250DC 654.00110-127 VAC Right Pocket Only UVRPN120 654.00220-240 VAC UVRPR240 654.00208 VAC UVRPP208 654.00277 VAC UVRPS277 654.00380-415 VAC UVRPT415 654.00440-480 VAC UVRPU480 654.00600 VAC UVRPV600 654.006MOLDED CASECIRCUIT BREAKERS‘A’ refers to a normally open contact (open when the breaker contacts are open).‘B’ refers to a normally closed contact (closed when the breaker contacts are open). Refer to the “Accessory Locations” chart for guidelines and limitations about which pockets may be used for accessory combinations.External Accessories pages 6-125 through 6-139Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-119

6MOLDED CASECIRCUIT BREAKERSVL Circuit BreakersPG 1600A Frame, VL Series & Thermal-Magnetic Trip UnitOrdering InformationPrices for a complete factory assembled PG breaker include the frame and tripunit only. The connectors must be ordered as separate items.For any other configuration, order the frame, trip unit, and connectors asseparate items.Connectors require a Breaker Lug Mounting Assembly or Breaker MountingBase and must be ordered as a seperate item.For DC applications, use Thermal magnetic trip unit only.For reverse feed applications select non-interchangeable trip breakers only.Change the third digit of the catalog number to “X” for non-interchangeable tripbreakers.100% Rated: For 100% rated breakers (or frames) with an interchangeable tripunit, change the 3 rd character of the catalog name to ”H”.For 100% rated breakers with a non-interchangeable trip unit, change the 3 rdcharacter of the catalog number to ”Y“.For 50˚C and special applications, refer to page 6-144. AMounting hardware is included with each frame or complete breaker.A Toggle Handle Extension is included with each frame or complete breaker.Interrupting RatingsRMS Symmetrical Amperes (KA)UL 489 IEC 60947-2Volts AC (50/60 Hz) Volts DC Volts AC (50/60 Hz)Breaker 220/240 380/415 690Type 240 480 600 250 500 ICU ICS ICU ICS ICU ICSNPG 65 35 25 22 35 65 35 50 25 20 10HPG 100 65 35 25 50 100 50 70 35 30 15LPG 200 100 65 42 65 200 100 100 50 35 17Connectors for 75°C WireAmpere Wire No. of cables Catalog ListConstruction Rating Range per phase Number Price $Aluminum 1200-1600A 1/0–750 kcmil Al/Cu 6 3TA6PG750 940.00Copper 1200-1600A 1/0–750 kcmil Cu 6 3TC6PG750 (future) 1342.00Aluminum 1200-1600A 300–600 kcmil 5 TA5P600 320.00Aluminum 1200-1600A 600–750 kcmil 4 TA4P750 254.00Aluminum 1200-1600A 300–600 kcmil 6 TA6R600 338.00Copper 1200-1600A 300–600 kcmil 5 TC5R600 426.00 Requires Lug Mounting Assembly LMAP1600. Requires Breaker Mounting Base MBPG1600 Kit or MBPG1601. Consists of 3 connectors. Consists of 1 connector. For 100% rated applications, 90°C. Standard connector provided with complete breaker.Mounting ArrangementDescription Catalog Number List Price $Lug Mounting Assembly LMAP1600 968.00Breaker Mounting Base (Front Connect) MBPG1600 1153.00Breaker Mounting Base (Rear Connect) MBPG1601 1153.00PG 1600A Frame 3-Pole with Thermal-Magnetic Trip UnitSelection/DimensionsDimensions, inches (mm)NumberTo Handleof Poles W L D D12, 3 9 (229)4 12 (305)16 (406) 6 (152) 8.1 (207)Shipping Weight, lbs. (kg)CompletePoles Frame Trip Unit Breaker2, 3 60.2 (27.3) 8.8 (4.0) 69.0 (31.3)4 76.7 (34.8) 13.2 (6.0) 89.9 (40.8)PG Thermal-Magnetic,InstantaneousTrip Adjustment RangeInstantaneousTrip Unit Continuous Overcurrent Setting (I i )Amp Rating (I n ) Min. Max.1200 7000 120001400 7000 120001600 7000 12000Note: Each breaker has 6 trip settings in this range.Model 525 Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNPG3F160 8983.00 HPG3F160 9944.00 LPG3F160 12158.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLY1200 NPG3B120 17276.00 HPG3B120 18237.00 LPG3B120 20451.00 CPT3B120 8293.001400 NPG3B140 17276.00 HPG3B140 18237.00 LPG3B140 20451.00 CPT3B140 8293.001600 NPG3B160 17276.00 HPG3B160 18237.00 LPG3B160 20451.00 CPT3B160 8293.00A - Consult with Siemens for availability.External Accessories pages 6-125 through 6-1396-120Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

VL Circuit BreakersPG 1600A Electronic 3-Knob & LCD Trip UnitsSelectionPG 1600A Frame 3-Pole Electronic Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNPG3F160 8983.00 HPG3F160 9944.00 LPG3F160 12158.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLYELECTRONIC LI TRIP1200 NPG3N120 18743.00 HPG3N120 19704.00 LPG3N120 21918.00 CPT3N120 9760.001600 NPG3N160 18743.00 HPG3N160 19704.00 LPG3N160 21918.00 CPT3N160 9760.00ELECTRONIC LSI TRIP1200 NPG3P120 19077.00 HPG3P120 20038.00 LPG3P120 22252.00 CPT3P120 10094.001600 NPG3P160 19077.00 HPG3P160 20038.00 LPG3P160 22252.00 CPT3P160 10094.00ELECTRONIC LSIG TRIP1200 NPG3U120 21006.00 HPG3U120 21967.00 LPG3U120 24181.00 CPT3U120 12023.001600 NPG3U160 21006.00 HPG3U160 21967.00 LPG3U160 24181.00 CPT3U160 12023.00ELECTRONIC LIG TRIP1200 NPG3X120 20672.00 HPG3X120 21633.00 LPG3X120 23847.00 CPT3X120 11689.001600 NPG3X160 20672.00 HPG3X160 21633.00 LPG3X160 23847.00 CPT3X160 11689.00PG 1600A Frame 4-Pole Electronic Trip Unit AModel 545 Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNPG4F160 11678.00 HPG4F160 12927.00 LPG4F160 15806.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLYELECTRONIC LI TRIP1200 NPG4N120 24367.00 HPG4N120 25616.00 LPG4N120 28495.00 CPT4N120 12689.001600 NPG4N160 24367.00 HPG4N160 25616.00 LPG4N160 28495.00 CPT4N160 12689.00ELECTRONIC LSI TRIP1200 NPG4P120 24800.00 HPG4P120 26049.00 LPG4P120 28928.00 CPT4P120 13122.001600 NPG4P160 24800.00 HPG4P160 26049.00 LPG4P160 28928.00 CPT4P160 13122.00ELECTRONIC LSIG TRIP1200 NPG4U120 27308.00 HPG4U120 28557.00 LPG4U120 31436.00 CPT4U120 15630.001600 NPG4U160 27308.00 HPG4U160 28557.00 LPG4U160 31436.00 CPT4U160 15630.00ELECTRONIC LIG TRIP1200 NPG4X120 26874.00 HPG4X120 28123.00 LPG4X120 31002.00 CPT4X120 15196.001600 NPG4X160 26874.00 HPG4X160 28123.00 LPG4X160 31002.00 CPT4X160 15196.006MOLDED CASECIRCUIT BREAKERSPG 1600A Frame 3-Pole Electronic LCD Trip UnitN-Interrupting Class H-Interrupting Class L-Interrupting ClassCatalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $FRAME ONLYContinuousNPG3F160 8983.00 HPG3F160 9944.00 LPG3F160 12158.00Ampere Rating COMPLETE FACTORY ASSEMBLED CIRCUIT BREAKER TRIP UNIT ONLYLCD ELECTRONIC LSI TRIP1200 NPG3D120 20591.00 HPG3D120 21552.00 LPG3D120 23766.00 CPT3D120 11608.001600 NPG3D160 20591.00 HPG3D160 21552.00 LPG3D160 23766.00 CPT3D160 11608.00LCD ELECTRONIC LSIG TRIP1200 NPG3E120 22520.00 HPG3E120 23481.00 LPG3E120 25695.00 CPT3E120 13537.001600 NPG3E160 22520.00 HPG3E160 23481.00 LPG3E160 25695.00 CPT3E160 13537.00A - Consult with Siemens for availability.Model 576 Trip UnitDiscount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-121

VL Circuit BreakersInternal Accessories for MG 800A, NG 1200A, and PG 1600A FramesAuxiliary Switch and Alarm Switch Combination KitsDescription Mounting Pocket Catalog Number List Price $2 Aux. + 2 Alarm Switches2A + 2B Left Pocket Only ASKP3 530.00Base AMBP24 Aux. Switches2A + 2B Left, Right, Neutral ASKP4 495.00Base AMBP1Auxiliary/Alarm Switch Mounting Base OnlyDescription Mounting Pocket Catalog Number List Price $Up to 4 Auxiliary Switches Left, Right, Neutral AMBP1 83.002 Aux. + 2 Alarm Switches Left Pocket Only AMBP2 83.00Auxiliary/Alarm Switch OnlyCommon to DG-PG FramesDescription Catalog Number List Price $1 Normally Open Contact (1A) ASWPA 108.001 Normally Closed Contact (1B) ASWPB 108.00Selectionx4x46Shunt TripsDescription Mounting Pocket Catalog Number List Price $24 VDC STRPB24DC 654.0048-60 VDC STRPC60DC 654.00110-127 VDC STRPD125DC 654.00220-250 VDC Right Pocket Only STRPE250DC 654.0048-60 VAC STRPM60 654.00110-127 VAC STRPN120 654.00208-277 VAC STRPS277 654.00380-600 VAC STRPV600 654.00MOLDED CASECIRCUIT BREAKERSUndervoltage ReleaseDescription Mounting Pocket Catalog Number List Price $12 VDC UVRPA12DC 654.0024 VDC UVRPB24DC 654.0048 VDC UVRPC48DC 654.0060 VDC UVRPG60DC 654.00110-127 VDC UVRPD125DC 654.00220-250 VDC UVRPE250DC 654.00110-127 VAC Right Pocket Only UVRPN120 654.00220-240 VAC UVRPR240 654.00208 VAC UVRPP208 654.00277 VAC UVRPS277 654.00380-415 VAC UVRPT415 654.00440-480 VAC UVRPU480 654.00600 VAC UVRPV600 654.00‘A’ refers to a normally open contact (open when the breaker contacts are open).‘B’ refers to a normally closed contact (closed when the breaker contacts are open). Refer to the “Accessory Locations” chart for guidelines and limitations about which pockets may be used for accessory combinations.External Accessories pages 6-125 through 6-1396-122Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

Molded Case Circuit BreakersMolded Case SwitchGeneralTypically a molded case switch is usedwhen a compact load-break switch isneeded for disconnect purposes. TheVL line of molded case switches fromSiemens is made of the same materialsand components as the VL circuitbreakers but do not provide overcurrentprotection. Each molded caseswitch has a fixed instantaneous selfprotectingtrip element which mayopen the switch under high fault conditions.Application NoteOvercurrent protection must be providedby an appropriate overcurrent protectivedevice located upstream fromSelectionthe molded case switch. Also, theshort-circuit current rating of theswitch is limited to the interrupting ratingof the upstream protective deviceor the ratings in the table below,whichever is less.Ordering InformationEach type VL molded case switch accepts the same terminals and accessories as the equivalent VL circuit breakers.All type VL molded case switches are suitable for reverse feed applications.Mounting hardware and standard line and load terminals are included on ratings through 250A. For 400 – 1600A ratings,order the lugs separately.All ratings are UL listed and CSA certified.Molded Case SwitchMaximumCatalog List Catalog ListAmpereNumber Price $ Number Price $Rating / Frame 2-Pole 3-Pole150A / DG HDS2S150L 1362.00 HDS3S150L 1447.00250A / FG HFS2S250L 1618.00 HFS3S250L 1998.00400A / JG HJS2S400 2840.00 HJS3S400 3357.00600A / LG HLS2S600 3973.00 HLS3S600 4970.00800A / MG HMS2S800 4811.00 HMS3S800 5843.001200A / NG HNS2S120 9172.00 HNS3S120 10002.001600A / PG — — HPS3S160 18017.00MaximumCatalogListAmpereNumber Price $Rating / Frame3-Pole250A /FG LFS3S250L 2498.00400A / JG LJS3S400 4028.00600A / LG LLS3S600 6863.00800A / MG LMS3S800 7597.001200A / NG LNS3S120 12003.001600A / PG LPS3S160 20179.00Short-CircuitCurrent Rating*Self ProtectiveInstantaneous240V 480V 600V Override200k 100k 25k 3,500A200k 100k 42k 4,400A200k 100k 42k 5,500A200k 100k 50k 6,500A200k 100k 65k 12,000A200k 100k 65k 12,000AShort-CircuitCurrent Rating*Self ProtectiveInstantaneous240V 480V 600V Override100k 65k 20k 2,500A100k 65k 35k 3,500A100k 65k 35k 4,400A100k 65k 35k 5,500A100k 65k 35k 6,500A100k 65k 35k 12,000A100k 65k 35k 12,000A6MOLDED CASECIRCUIT BREAKERS* The Short-Circuit Current Rating is the maximum available current of the circuit where the switch is used, when protected by an appropriate overcurrent protective device.Above 250A, terminals are not included and must be ordered separately. For terminal information and the variety of lugs available for VL breakers.Discount Schedule MCCBSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-123

Molded Case Circuit BreakersMotor Circuit ProtectorsSelectionGeneralProtection of Motor CircuitsMolded case circuit breakers are used in motor circuits as a disconnecting means and for short-circuit protection. They should beused in conjunction with motor-running, over-current protection devices, and should permit the motor to start without nuisance trippingfrom motor-inrush current. The circuit breaker should have a continuous current rating of not less than 115% of the motor fullloadcurrent.The recommended motor circuit protectors listed have continuous-current ratings of at least 115% of motor full-load currents. Thetrip setting positions are approximately 11 times motor full-load current. The suggested trip settings may need to be adjustedupward to no higher than 1300% of full-load current for non-design E type motors, and no greater than 1700% of full-load currentfor design E motors, to allow for motor startup due to in-rush current.Breaker Mounted Immediately Ahead of Motor StarterSiemens motor circuit protectors are recommended for use in combination motor starters to provide selective short-circuit protectionfor the motor branch circuit. The adjustable instantaneous trip feature of the Siemens motor circuit protector provides for a tripsetting slightly above the peak motor in-rush current. With this setting, no delay is introduced in opening the circuit when a faultoccurs. This circuit breaker has no time-delay trip element. Therefore it must be used in conjunction with, and immediately aheadof, the motor-running overcurrent protection device.Important: The information below does not apply to all motor applications: it is recommended that the user refer to the NationalElectrical Code (NEC) for specific needs.Table 1 (When Breaker is Mounted Immediately Ahead of Motor Starter)3-Phase Induction Type Motors (Siemens motor circuit protectors for branch circuit use with alternating-current combination, full voltage motor starters)6MOLDED CASECIRCUIT BREAKERSMotor Full Trip CatalogLoad Amperes Setting (A) Number List Price $35-50 45042-60 54048-70 630 HDM3L150L 1589.0055-80 72062-90 81069-100 90058-83 75069-100 90081-117 1050 HDM3M150L 1589.0092-133 1200104-150 1350115-150 150096-139 1250115-150 1500135-150 1750 HDM3H150L 1589.00135-150 2000135-150 2250135-150 250046-67 60055-80 72065-93 840 HFM3L250L 2111.0074-107 96083-120 108092-133 120077-111 100092-133 1200108-156 1400 HFM3M250L 2111.00123-178 1600138-200 1800154-222 2000135-194 1750162-210 2100188-220 2450 HFM3H250L 2111.00215-241 2800242-250 3150242-250 3500Motor Full Trip CatalogLoad Amperes Setting (A) Number List Price $96-139 1250115-167 1500135-194 1750 HJM3L400 3881.00154-222 2000173-250 2250192-278 2500154-222 2000185-267 2400215-311 2800 HJM3M400 3881.00246-356 3200277-400 3600308-400 4000154-222 2000185-267 2400215-311 2800 HLM3L600 5771.00246-356 3200277-400 3600308-444 4000212-306 2750254-367 3300296-428 3850 HLM3M600 5771.00338-489 4400381-550 4950423-600 5500250-361 3250292-422 3800335-483 4350 HMM3M800 8277.00385-556 5000442-638 5740500-722 6500385-556 5000462-667 6000538-778 7000 HNM3M120 13587.00615-889 8000692-1000 9000769-1111 10,000 Motor circuit protectors rated 150A and 250A are supplied with line and load lugsinstalled. If lugs are required on 400A to 1200A motor circuit breakers, order requiredlugs separately. These settings are provided for starting currents greater than 11X but not to exceed17X. Full Load Amps ( FLA ) not to exceed ampere rating of MCP.6-124Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

External AccessoriesOperating MechanismsSelection6MOLDED CASECIRCUIT BREAKERSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-125

External AccessoriesOperating MechanismsFor DG to FG Frame For JG to LG Frame150 to 250 A 400 A to 600 ACatalog List Catalog ListDescription Number Price $ Number Price $Through Door Mounted Rotary Handle Operator Kit AFixed depth and the handle is mounteddirectly on the circuit breaker.Lockable knob (for up to 3 padlocks).NEMA 1, 12 RHFF 155.00 RHFL 193.00Red Handle Versionwith red knob, yellow indicator plateNEMA 1, 12 RHFFEM 168.00 RHFLEM 205.00Door Mounted Rotary Handle Operator Kit AVariable depth, door mounted handle.Includes knob with masking frame,indicator plate, detachable door coupling,12" shaft, and breaker mounted rotaryoperator. Lockable knob (for up to 3padlocks).NEMA 1, 12 RHVF12 214.00 RHVL12 295.00Auxiliary Switch Kits AFor Direct or Extended RotaryHandle Operators (RHF and RHV).Form C, Early Break type2 Aux. Switch Kit Includes 1 switch with 5' wireFor Variable Depth RHSFA1 187.00 RHSLA1 187.00For Fixed Depth RHSFA1F 187.00 RHSLA1F 187.00Includes 2 switches with 5' wireFor Variable Depth RHSFA2 237.00 RHSLA2 237.00For Fixed Depth RHSFA2F 237.00 RHSLA2F 237.00Door Mounted Rotary Operator Mechanism Only ABreaker mechanism only RHVFBM 131.00 RHVLBM 212.00MOLDED CASECIRCUIT BREAKERS6Door Mounted Rotary Handle Only AStandard version NEMA 1, 12 RHVM12H 51.00 RHVM12H 51.00NEMA 3R RHVM3RH 116.00 RHVM3RH 116.00NEMA 4X RHVM4XH 150.00 RHVM4XH 150.00Red Handle version RHVMEMH 61.00 RHVMEMH 61.00Extension Shaft Only, for Door Mounted Operator A2 inches (50.8mm) RHVMS02 31.50 RHVMS02 31.503 inches (76.2mm) — — — —12 inches (304.8 mm) RHVMS12 31.50 RHVMS12 31.5016 inches (406.4 mm) RHVMS16 31.50 RHVMS16 31.5024 inches (609.6mm) w/ support bracket — — — — During manual operation, Early Break auxiliary switch contacts open before the breaker opens.A - Consult with Siemens for availability.6-126Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

For MG FrameFor NG to PG Frame800 A 1200 to 1600 ACatalog List Catalog ListDescription Number Price $ Number Price $Through Door Mounted Rotary Handle Operator Kit AFixed depth, breaker mounted.For direct fitting to the circuit breaker.Lockable with up to 3 padlocks.NEMA 1, 12 RHFM 210.00 — —Red Handle versionwith red knob, yellow indicator plateNEMA 1, 12 RHFMEM 226.00 — —Door Mounted Rotary Handle Operator Kit AVariable depth, door mounted handle. — —Includes knob with masking frame,indicator plate, detachable door coupling,12" shaft, and breaker mounted rotaryoperator. Lockable knob (for up to 3padlocks).NEMA 1, 12 RHVM12 322.00 — —Auxiliary Switch Kits AFor Direct or Extended RotaryHandle Operators (RHF and RHV).Early Break type2 Aux. Switch KitIncludes 1 switch with 5' wireFor Variable Depth RHSMA1 187.00 RHSPA1 187.00For Fixed Depth RHSMA1F 187.00 RHSPA1F 187.00Includes 2 switches with 5' wireFor Variable Depth RHSMA2 237.00 RHSPA2 237.00For Fixed Depth RHSMA2F 237.00 RHSPA2F 237.00Door Mounted Rotary Operator Mechanism Only ABreaker mechanism only RHVMBM 239.00 RHVPBM 239.00Door Mounted Rotary Handle Only AStandard version NEMA 1, 12 RHVM12H 51.00 RHVP3RH 116.00NEMA 3R RHVM3RH 116.00 RHVP3RH 116.00NEMA 4X RHVM4XH 150.00 RHVP4XH 150.00Red Handle version RHVMEMH 61.00 RHVPEMH 126.00Extension Shaft Only, for Door Mounted Operator A2 inches (50.8mm) RHVMS02 31.50 — —3 inches (76.2mm) — — RHVPS03 97.0012 inches (304.8 mm) RHVMS12 31.50 RHVPS12 97.0016 inches (406.4 mm) RHVMS16 31.50 — —24 inches (609.6mm) w/ support bracket — — RHVPS24 127.006MOLDED CASECIRCUIT BREAKERSA - Consult with Siemens for availability.Discount Schedule MCCB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-127

External AccessoriesOperating MechanismsFor DG and FG Frame For JG and LG Frame150 to 250 A 400 to 600 ACatalog List Catalog ListDescription Number Price $ Number Price $Variable Depth Flange Mounted Operator Kit AAdjustable from 8" to 16"Complete kit, includes handle andvariable depth operator. NEMA 1, 3R, 12 FHVF3R 275.00 FHVL3R 294.00NEMA 4X FHVF4X 368.00 FHVL4X 391.00IEC Black Handle NEMA 1, 3R, 12 FHVF3RB 275.00 FHVL3RB 294.00Max-Flex, Variable Depth FlangeMounted Operator Kit AComplete kit, includes handle, breakeroperator, and cable. NEMA 1, 3R, 12 MFKF3R 588.00 MFKL3R 630.00For DG and FG operators, the cable is 36",all others are 48"Handle Only, for Max-Flex Variable Depth ANEMA 1, 3R, 12 Plastic MFHM3R 269.00 MFHM3R 269.00NEMA 1, 3R, 12 Steel - epoxy coated MFHM3RS 315.00 MFHM3RS 315.00NEMA 4, 4X Steel - chrome plated MFHM4X 432.00 MFHM4X 432.00Solid color (all gray) Plastic NEMA 1, 3R, 12 MFHM3RB 269.00 MFHM3RB 269.00Solid color (black handle) Steel epoxy coated NEMA 1, 3R, 12 MFHM3RSB 315.00 MFHM3RSB 315.00Breaker Operator Mechanism Only, for Max-Flex A MFMF 194.00 MFML 218.006MOLDED CASECIRCUIT BREAKERSCable Only, for Max-Flex Variable Depth A36" MFCF036 161.00 MFCM036 177.0048" MFCF048 192.00 MFCM048 209.0060" MFCF060 217.00 MFCM060 239.0072" MFCF072 239.00 MFCM072 275.0084" MFCF084 264.00 MFCM084 319.0096" MFCF096 287.00 MFCM096 376.00120" MFCF120 376.00 MFCM120 408.00144" MFCF144 417.00 MFCM144 424.00Handle Auxiliary Switch AForm C (1NO - 1NC), early break 1 Aux. switch MFSFA1 165.00 MFSLA1 165.002 Aux. switch MFSFA2 330.00 MFSLA2 330.00 Max-Flex handles are available with solid gray or black handles instead of the customary “Red for On” flange handle.The black handle is preferred for IEC markets, where red handles have a specific meaning. During manual operation, Early Break aux. contacts open before the breaker opens.A - Consult with Siemens for availability.6-128Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

For MG Frame For NG Frame For PG Frame800 A 1200 A 1600 ACatalog List Catalog List Catalog ListDescription Number Price $ Number Price $ Number Price $Variable Depth Flange Mounted Operator Kit AAdjustable from 8" to 16"Complete kit, includes handle andvariable depth operator. NEMA 1, 3R, 12 — — — — — —NEMA 4X — — — — — —IEC Black Handle NEMA 1, 3R, 12 — — — — — —Max-Flex, Variable Depth FlangeMounted Operator Kit AComplete kit, includes handle, breakeroperator, and cable. NEMA 1, 3R, 12 MFKM3R 736.00 MFKP3RS 839.00 MFKP3RS 839.00For DG and FG operators, the cable is 36",all others are 48"Handle Only, for Max-Flex Variable Depth ANEMA 1, 3R, 12 Plastic MFHM3R 269.00 — — — —NEMA 1, 3R, 12 Steel - epoxy coated MFHP3RS 470.00 MFHP3RS 470.00 MFHP3RS 470.00NEMA 4, 4X Steel - chrome plated MFHM4X 432.00 MFHP4X 630.00 MFHP4X 630.00Solid color (all gray) Plastic NEMA 1, 3R, 12 MFHM3RB 269.00 — — — —Solid color (black handle) Steel epoxy coated NEMA 1, 3R, 12 MFHM3RSB 315.00 MFHP3RSB 470.00 MFHP3RSB 470.00Breaker Operator Mechanism Only, for Max-Flex A MFMM 218.00 MFMP 218.00 MFMP 218.00Cable Only, for Max-Flex Variable Depth A36" MFCM036 177.00 — — — —48" MFCM048 209.00 MFCP048 237.00 MFCP048 237.0060" MFCM060 239.00 MFCP060 275.00 MFCP060 275.0072" MFCM072 275.00 MFCP072 320.00 MFCP072 320.0084" MFCM084 319.00 MFCP084 337.00 MFCP084 337.0096" MFCM096 376.00 MFCP096 401.00 MFCP096 401.00120" MFCM120 408.00 MFCP120 437.00 MFCP120 437.00144" MFCM144 424.00 MFCP144 588.00 MFCP144 588.00Handle Auxiliary Switch AForm C (1NO - 1NC), early break 1 Aux. switch MFSPA1 CSO MFSPA1 CSO MFSPA1 CSO2 Aux. switch MFSPA2 CSO MFSPA2 CSO MFSPA2 CSO6MOLDED CASECIRCUIT BREAKERSA - Consult with Siemens for availability.Discount Schedule MCCB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-129

External AccessoriesOperating MechanismsFor DG to FG Frame150 to 250 ACatalog ListDescription Number Price $Stored Energy and Motor OperatorsLockable with up to 3 padlocks.AC Voltage DC Voltage Stored Energy Type— 24 SEAFB 1915.0042-48 42-48 SEAFM 1915.0060 60 SEAFY 1915.00110–127 110–127 SEAFN 1915.00220–250 220–250 SEAFR 1915.00Cylinder Locks for Field Installation CLKF 120.00Plug-In and Draw-Out BasesFor DG FrameFor FG Frame150 A 250 ACatalog List CatalogDescription Number Price $ NumberPlug-in Mounting Base AssemblyIncludes base, terminal blade kit, sec. terminal block assembly, base tripinterlock, and mounting hardware.Rear Connected3-pole PCBDRC3 351.00 PCBFRC3 691.00Front Connected3-pole PCBDFC3 351.00 PCBFFC3 691.006MOLDED CASECIRCUIT BREAKERSDraw-out AssemblyIncludes base, position indicator switch, socket, base tripinterlock, crank handle, connectors, and necessary shields.Rear Connected3-pole DCADRC3 944.00 DCAFRC3 1194.00Front Connected3-pole DCADFC3 944.00 DCAFFC3 1194.00(Draw-out assembly includes side plates and all hardware)Hex Wrench for racking draw-out assembly and position indicator DCHP 134.00 DCHP 134.00Position Indicator Switch DCIP 156.00 DCIP 156.00Form “C” switch to indicate breaker engaged/de-engagedposition. Secondary Terminal Block Assy. PCTF83 109.00 PCTF83 109.00Accessory connections for plug-in or draw-out breakers. Pre-wired plugand block with 8 terminal points. 90° Connection Adapter Kit PCAF390 74.00 PCAF390 74.00For rear connected 3-pole plug-in basePlug-In Spare Breaker Kit PCXD3 242.00 PCXF3 320.00Set of 6 terminal blades, 2 terminal shield, & 1 trip interlockDraw-out Spare Breaker Kit DCXD3 210.00 DCXF3 289.00Set of 6 terminal blades, & 1 trip interlockSpare BreakerTrip Interlock PCXFT 21.00 PCXFT 21.00 Up to 2 position indicator switches may be mounted per plug-in or draw-out base. Up to 2 plugs per breaker (16 terminal points) may be mounted on DG, and FG breakers. Up to 3 plugs per breaker (24 terminal points) may be mountedon JG, LG, MG, NG, and PG breakers.A - Consult Siemens for availability.6-130Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

For JG to LG Frame For MG Frame For NG to PG Frame400 to 600 A 800 A 1200 to 1600 ACatalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $Stored Energy Type Stored Energy Type Motor Operator TypeSEALB 3525.00 SEAMB 4173.00 MTRPB 4457.00SEALM 3525.00 SEAMM 4173.00 MTRPM 4457.00SEALY 3525.00 SEAMY 4173.00 MTRPY 4457.00SEALN 3525.00 SEAMN 4173.00 MTRPN 4457.00SEALR 3525.00 SEAMR 4173.00 MTRPR 4457.00CLKP 120.00 CLKP 120.00 CLKP 120.00For JG Frame For LG Frame For MG Frame For NG Frame For PG Frame400 A 600 A 800 A 1200 A 1600 ACatalog List Catalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $ Number Price $PCBJRC3 1179.00 PCBLRC3 1865.00 PCBMRC3 2891.00 PCBNRC3 3909.00 — —PCBJFC3 1179.00 PCBLFC3 1865.00 — — — — — —DCAJRC3 1881.00 DCALRC3 2886.00 DCAMRC3 4337.00 DCAPRC3 5566.00 DCAPRC3 5566.00DCAJFC3 1881.00 DCALFC3 2886.00 DCAMFC3 4337.00 DCAPFC3 A 5566.00 DCAPFC3 A 5566.00DCHP 134.00 DCHP 134.00 DCHP 134.00 DCHP 134.00 DCHP 134.00DCIP 156.00 DCIP 156.00 DCIP 156.00 DCIP 156.00 DCIP 156.006MOLDED CASECIRCUIT BREAKERSPCTL83 133.00 PCTL83 133.00 PCTM83 143.00 PCTP83 168.00 PCTP83 168.00— — — — — — — — — —PCXJ3 410.00 PCXL3 483.00 PCXM3 1085.00 PCXN3 1344.00 — —DCXJ3 378.00 DCXL3 452.00 DCXM3 1050.00 DCXN3 1307.00 DCXP3 1307.00PCXLT 23.00 PCXLT 23.00 PCXMT 58.00 PCXPT 77.00 PCXPT 77.00Discount Schedule MCCB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-131

External AccessoriesConnectionsStandard 3-Pole SetRound TerminalFor DG FrameFor FG Frame150 A 250 ACatalog List Catalog ListDescription Number Price $ Number Price $Front Bus Bar Connections Includes nut keeper plates and shield.Standard (straight)3-Pole Set FBCD3 CSO FBCF3 CSOBus Bar Connection Strap Kit — — — —Includes 6 - Bus Bars, 6 Nut Keepers & Shields100% rated applicationsRear-Connecting StudsShort length round term. (1piece) RTLDSR 83.00 RTLFSR 83.00Long length round term. (1piece) RTLDLR 112.00 RTLFLR 112.003-Pole round term. kit, 2 short + 1 long SRTDR3 277.00 SRTFR3 277.00Short length flat term. (1piece) RTLDSF 83.00 RTLFSF 83.00Long length flat term. (1piece) RTLDLF 112.00 RTLFLF 112.003-Pole flat term. kit, 2 short + 1 long SRTDF3 277.00 SRTFF3 277.00Flat bus bar type (1 piece) — — — —3-Pole set of flat bus bar — — — —Flat TerminalTerminal Shields Includes 1 terminal shield, for line or load.3-Pole Standard Shield TSSF3 37.00 TSSF3 37.003-Pole Extended Shield TSLF3 58.00 TSLF3 58.00Interphase Barriers Set of 2 barriers IPBF 29.00 IPBF 29.00Also fits plug-in and draw-out bases.6MOLDED CASECIRCUIT BREAKERSFlat Bus BarLug Mounting Assy. — — — —Breaker Mounting BaseFront connected — — — —Rear connected — — — —Terminal ShieldsInterphase Barriers Not UL listed.A - Consult Siemens for availability.6-132Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

For JG Frame For LG Frame For MG Frame For NG Frame For PG Frame400 A 600 A 800 A 1200 A 1600 ACatalog List Catalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $ Number Price $FBCJ3 A CSO FBCL3 A CSO FBCM3 A CSO FBCP3 A CSO FBCP3 A CSO— — — — — — SSBP 1004.00 SSBP 1004.00SSBPH 1227.00 SSBPH 1227.00RTLJSR 195.00 — — — — — — — —RTLJLR 208.00 — — — — — — — —SRTJR3 597.00 — — — — — — — —RTLJSF 195.00 — — — — — — — —RTLJLF 208.00 — — — — — — — —SRTJF3 597.00 — — — — — — — —— — RTLLSF 224.00 RTLMSF 323.00 RTLNSF 434.00 — —— — SRTLF3 671.00 SRTMF3 967.00 SRTNF3 1303.00 — —TSSL3 47.50 TSSL3 47.50 TSSM3 67.00 TSSP3 91.00 TSSP3 91.00TSLL3 68.00 TSLL3 68.00 TSLM3 97.00 TSLP3 116.00 TSLP3 116.00IPBM 38.50 IPBM 38.50 IPBM 38.50 IPBP 83.00 IPBP 83.00— — — — — — — — LMAP1600 968.00— — — — — — — — MBPG1600 1211.00— — — — — — — — MBPG1601 1211.006MOLDED CASECIRCUIT BREAKERSA - Consult with Siemens for availability.Discount Schedule MCCB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-133

External AccessoriesConnectionsFor DG FrameFor FG Frame150 A 250 ACatalog List Catalog ListDiscription Number Price $ Number Price $Nut Keeper PlatesFor ring/tongue terminal or bus bar connections.(For metric threads on other than the JG or LG frame,change ”TNK” to ”TMK”)1 Nut Keeper Plate TNKD 6.10 TNKF 6.10Kit of 3 TNKD3 19.40 TNKF3 19.40Mechanical LugsSteel Wrap Around Body (Cu Wire Only)Cable Size; (cables per phase) #8-1/0; 1-hole #4-350 kcmil; 1-holeSingle Lug TW1DG20 7.20 TW1FG350 22.00Kit of 3 3TW1DG20 22.00 3TW1FG350 65.00Aluminum Body (Al or Cu Wire)Cable Size; (cables per phase) #6-3/0; 1-hole #4-350 kcmil; 1-holeSingle Lug TA1DG30 7.20 TAW1FG350 22.00Kit of 2 — — — —Kit of 3 3TA1DG30 22.00 3TAW1FG350 65.00Cable Size; (cables per phase) — — — —Single Lug — — — —Kit of 2 — — — —Kit of 3 — — — —Cable Size; (cables per phase) — — — —Single Lug — — — —Kit of 3 — — — —Copper Body (Cu Wire Only)Cable Size; (cables per phase) #6-3/0; 1-hole #4-350 kcmil; 1-holeSingle Lug TC1DG30 33.50 TCW1FG350 34.50Kit of 2 — — — —6MOLDED CASECIRCUIT BREAKERSKit of 3 3TC1DG30 101.00 3TCW1FG350 104.00Cable Size; (cables per phase) — — — —Single Lug — — — —Compression LugsCable Size; (cables per phase) #14-2/0; 1-cable #6-350 kcmil; 1-cableKit of 2 2CLD20 54.00 2CLF350 102.00Kit of 3 3CLD20 81.00 3CLF350 152.00Cable Size; (cables per phase) — —Kit of 2 — —Kit of 3 — — — —Cable Size; (cables per phase) — — — —Kit of 3 — — — —Distribution Lugs#14-#1; 2-hole andCable Size; (cables per phase) #14-#2; 3-hole #14-2/0; 1-holeSingle Lug TA3DG02 31.50 TA3FG20 37.00Kit of 3 3TA3DG02 110.00 3TA3FG20 110.00Cable Size; (cables per phase) #14-#4; 6-hole #14-#4; 6-holeSingle Lug TA6DG04 33.50 TA6FG04 37.00Kit of 3 3TA6DG04 110.00 3TA6FG04 110.006-134Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

For JG Frame For LG Frame For MG Frame For NG Frame For PG Frame400 A 600 A 800 A 1200 A 1600 ACatalog List Catalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $ Number Price $TMKJ 6.10 TNKL 9.80 TNKM 9.80 TNKP 9.80 TNKP 9.80TMKJ3 19.40 TNKL3 29.00 TNKM3 29.00 TNKP3 29.00 TNKP3 29.001/0-500 kcmil; 1-hole — — — — — — — —TW1JG600 29.00 — — — — — — — —3TW1JG600 87.00 — — — — — — — —3/0-250 kcmil; 2-hole #2-600 kcmil; 2-hole 1/0-500 kcmil, 3-hole 1/0-500 kcmil; 4-hole 1/0-750 kcmil; 6-holeTA2JG250 29.00 — — TA3MG500 67.00 — — — —— — 2TA2LG600LD 72.00 3TA3MG500 202.00 2TA4NG500 579.00 — —2TA2LG600LN 72.003TA2JG250 87.00 3TA2LG600LD 109.00 3TA4NG500 291.00 3TA6PG750 940.003TA2LG600LN 109.00 3TA4NG500H 875.00AL: 250-750 kcmilAL: 250-750 kcmilCU: 3/0-600 kcmil; 1-hole CU: 3/0-600 kcmil; 1-hole 500 -750 kcmil; 2-hole 500 -750 kcmil; 3-hole 600-750 kcmil; 4-holeTA1JG750 36.00 TA1JG750 (400A max) 36.00 TA2MG750 122.00 TA3NG750 106.00 TA4P750 254.00— — — — — — 2TA3NG750 579.003TA1JG750 109.00 3TA1JG750 (400A max)109.00 3TA2MG750 364.00 3TA3NG750 832.00 — —— — — — #2-600 kcmil; 3-hole 300-600 kcmil; 5; 6-hole— — — — — — TA5P600 320.00TA6R600 338.00— — — — 3TA3MG600 218.00 — — — —3/0-250 kcmil; 2-hole #2-600 kcmil; 2-hole 1/0-500 kcmil; 3-hole 1/0-500 kcmil; 4-hole 1/0-750 kcmil; 6-holeTC2JG250 77.00 — — TC3MG500 134.00 — — — —— — 2TC2LG600LD 154.00 — — — — — —2TC2LG600LN 154.00— — 3TC2LG600LD 231.00 — — 3TC4NG500 832.00 3TC6PG750 (future) 1342.003TC2LG600LN 231.003/0-750 kcmil; 1-hole — — — — 1/0-500 kcmil; 3-hole 300-600 kcmil; 5-holeTC1JG750 77.00 — — — — TC3NG500 CSO TC5R600 426.00#6-350 kcmil; 1-cable #6-350 kcmil; 2-cable 1/0-500 kcmil; 3-cable 1/0-500 kcmil; 4-cable #2-600 kcmil; 8-cable— — — — — — — — — —3CLJ350 449.00 6CLL350 899.00 9CLM500 (future) 1056.00 12CLN500 1393.00 24CLP600 (future) 2787.00250-750 kcmil; 1-cable 250 kcmil-750 kcmil; 1-cable — — — —— — — — — — — — — —3CLJ750 449.00 3CLL750 494.00 — — — — — —6MOLDED CASECIRCUIT BREAKERS250-600 kcmil; 1-cable 250 kcmil-600 kcmil; 2-cable — — — — — —3CLJ600 449.00 6CLL600 899.00 — — — — — —#14-#4; 12-hole — — — — — — — —TA12JG04 88.00 — — — — — — — —3TA12JG04 265.00 — — — — — — — —#14-2/0; 6-hole — — — — — — — —TA6JG20 88.00 — — — — — — — —3TA6JG20 265.00 — — — — — — — —All lug kits include the nut keepers. Mounted on Load Side Only. Mounted on Line Side Only. Rated 90° for 100% Applications. Requires extended modified shield. Used only with LMAP 1600 mounting base. Used with MBPG 1600 or 1601 mounting base.Discount Schedule MCCB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-135

External AccessoriesGeneralFor DG FrameFor FG Frame150 A 250 ACatalog List Catalog ListDescription Number Price $ Number Price $Handle Padlocking Device HPLF 15.80 HPLF 15.80To padlock breaker toggle in the “OFF” position. Accepts upto 3 padlocks with 5–8 mm shackles.Handle Blocking Device HBDF 27.00 HBDF 27.00For holding the handle in the “ON” or “OFF” position. Not alockout/tagout device.Handle PadlockingDeviceWalking-Beam Interlock MechanismProvides mechanical interlocking between two adjacentcircuit breakers.Fixed mounted breakers WBMFFM 608.00 WBMFFM 608.00Plug-in or draw-out mounted breakers (Future) WBMFDP 603.00 WBMFDP 603.00Note: Both breakers must be of the same frame size.Walking-BeamInterlock MechanismCable Interlock MechanismProvides mechanical interlocking between 2 circuit-breakers -includes operator mechanism for one circuit breaker only. CBTF 481.00 CBTF 481.00Combination with the next larger or smaller frame size is possible.Interlock CableCable only, to connect 2 circuit breakers.Cable length 18 in. .46m (recommended up to 250A) CBCF18 134.00 CBCF18 134.00Cable length 36 in. .91m (recommended from 600–800A) CBCM36 156.00 CBCM36 156.00Cable length 54 in. 1.37m (recommended from 1200–1600A) CBCP54 190.00 CBCP54 190.00Mounting Screw KitIncludes the necessary hardware to mount a circuit breaker to theuser’s prepared surface (SAE thread)Kit with 2 screws MSKF2 3.70 MSKF2 3.70Kit with 4 screws MSKF4 3.70 MSKF4 3.706MOLDED CASECIRCUIT BREAKERSCable InterlockSystemTrip Adjustment Sealing CoverIncludes a trip unit cover to prevent tampering or adjustmentof trip settings. Seal not included.Electronic Trip Units TSCPET 15.80 TSCPET 15.80Thermal-Magnetic Trip Units TSCFTM 38.50 TSCFTM 38.506-136Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

For JG Frame For LG Frame For MG Frame For NG Frame For PG Frame400 A 600 A 800 A 1200 A 1600 ACatalog List Catalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $ Number Price $HPLL 22.00 HPLL 22.00 HPLM 57.00 HPLP 57.00 HPLP 57.00HBDL 27.00 HBDL 27.00 HBDM 57.00 HBDP 57.00 HBDP 57.00WBMLFM 608.00 WBMLFM 608.00 WBMMFM 608.00 WBMPFM 658.00 WBMPFM 658.00WBMLDP 603.00 WBMLDP 603.00 WBMMDP 603.00 WBMPDP 658.00 WBMPDP 658.00CBTL 515.00 CBTL 515.00 CBTM 548.00 CBTP 582.00 CBTP 582.00— — — — — — — — — —CBCM36 156.00 CBCM36 156.00 CBCM36 156.00 — — — —CBCP54 190.00 CBCP54 190.00 CBCP54 190.00 CBCP54 190.00 CBCP54 190.00— — — — — — — — — —MSKL4 10.90 MSKL4 10.90 MSKM4 15.80 MSKP4 29.00 MSKP4 29.006TSCPET 15.80 TSCPET 15.80 TSCPET 15.80 TSCPET 15.80 TSCPET 15.80TSCLTM 38.50 TSCLTM 38.50 TSCMTM 38.50 — — — —MOLDED CASECIRCUIT BREAKERSDiscount Schedule MCCB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-137

External AccessoriesGround Sensors & Electronic AccessoriesFor DG FrameFor FG Frame150 A 250 ACatalog List Catalog ListDescription Number Price $ Number Price $Neutral Current Transformer (Ground Sensor, N-pole)Neutral = 35/60A NGSD060 402.00 — —Neutral = 100A NGSF100 402.00 NGSF100 402.00Neutral = 150A NGSF150 402.00 NGSF150 402.00Neutral = 250A — — NGSJ250 402.00Neutral = 400A — — — —Neutral = 600A — — — —Neutral = 800A — — — —Neutral = 1000/1200A — — — —Neutral = 1600A — — — —Communications & ElectronicsPower Stick - Hand held, battery operated power supply for EPSP18V 582.00 EPSP18V 582.00LCD trip units. (Requires two -9V batteries)For programming and trip testing only.Power StickSpare FlatCableRS232 CableTest Kit - Portable power supply for programming, trip test, ELTPHB 3428.00 ELTPHB 3428.00and checking CT’s plus a port for local communications ofcurrents flow and trip settings. (Requires two 9V batteries)Universal Power Supply - 120/240Vac adapter used in lieu of UPAPELTK 537.00 UPAPELTK 537.009V batteries for Test Kit ELTPHB (includes necessary cables)Power Supply with ZSI (for Model 576 trip units only). COMPS 2013.00 COMPS 2013.00Com10 Profibus Communications Module with ZSI COMPRO 2684.00 COMPRO 2684.00for LCD trip Model 576 onlyCom11 Modbus Communications Module with ZSI COMMOD 2684.00 COMMOD 2684.00for LCD Trip Model 576 only6MOLDED CASECIRCUIT BREAKERSCom10 Profibus &Com11 ModbusCommunicationsModuleCommunications Adapter - Interface with a laptop or PC CSAPELTU 911.00 CSAPELTU 911.00to test or program Model 545 & 576 trip unitsCable for COM10/11 and Model 576 external COMKIT1 179.00 COMKIT1 179.00power supply……5ft. (1.5m)Extension cable for COMKIT1 & COMKIT2, adds 5 ft. COMEXT 134.00 COMEXT 134.00Spare flat cable for Test Kits or Communications Adapters COMPCA 358.00 COMPCA 358.00RS232 type cable for Test Kits or Communications Adapters COMP232 179.00 COMP232 179.00Door Cutouts & ExtensionsCover Frame for Door CutoutFor fixed or plug-in mounted circuit breakers. (IP30)2-Pole & 3-Pole BZLF3 224.00 BZLF3 224.00For breakers with stored energy operator. (IP40) BZLFRHSE 224.00 BZLFRHSE 224.00Cover Frame forDoor CutoutCircuit-breaker draw-out mounted and toggle handle operated.Kit includes cover frame (bezel) and escutcheon as needed. (IP40)(not for use with rotary handle or stored energy operator) BZLFBDC 224.00 BZLFBDC 224.00Toggle Handle Extension — — — —For spare or replacement. (One is included with eachLG - PG frame.)Toggle HandleExtension6-138Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule MCCB

For JG Frame For LG Frame For MG Frame For NG Frame For PG Frame400 A 600 A 800 A 1200 A 1600 ACatalog List Catalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $ Number Price $— — — — — — — — — —— — — — — — — — — —— — — — — — — — — —NGSJ250 402.00 — — — — — — — —NGSL400 402.00 NGSL400 402.00 — — — — — —— — NGSM600 402.00 NGSM600 402.00 — — — —— — — — NGSN800 402.00 NGSN800 402.00 — —— — — — — — NGSP120 402.00 NGSP120 402.00— — — — — — — — NGSP160 402.00EPSP18V 582.00 EPSP18V 582.00 EPSP18V 582.00 EPSP18V 582.00 EPSP18V 582.00ELTPHB 3428.00 ELTPHB 3428.00 ELTPHB 3428.00 ELTPHB 3428.00 ELTPHB 3428.00UPAPELTK 537.00 UPAPELTK 537.00 UPAPELTK 537.00 UPAPELTK 537.00 UPAPELTK 537.00COMPS 2013.00 COMPS 2013.00 COMPS 2013.00 COMPS 2013.00 COMPS 2013.00COMPRO 2684.00 COMPRO 2684.00 COMPRO 2684.00 COMPRO 2684.00 COMPRO 2684.00COMMOD 2684.00 COMMOD 2684.00 COMMOD 2684.00 COMMOD 2684.00 COMMOD 2684.00CSAPELTU 911.00 CSAPELTU 911.00 CSAPELTU 911.00 CSAPELTU 911.00 CSAPELTU 911.00COMKIT2 179.00 COMKIT2 179.00 COMKIT2 179.00 COMKIT1 179.00 COMKIT1 179.00COMEXT 134.00 COMEXT 134.00 COMEXT 134.00 COMEXT 134.00 COMEXT 134.00COMPCA 358.00 COMPCA 358.00 COMPCA 358.00 COMPCA 358.00 COMPCA 358.00COMP232 179.00 COMP232 179.00 COMP232 179.00 COMP232 179.00 COMP232 179.006MOLDED CASECIRCUIT BREAKERSBZLL3 224.00 BZLL3 224.00 BZLM3 279.00 BZLP3 279.00 BZLP3 279.00BZLLRHSE 224.00 BZLLRHSE 224.00 BZLMRHSE 279.00 BZLPRHSE 279.00 BZLPRHSE 279.00BZLLBDC 224.00 BZLLBDC 224.00 BZLMBDC 279.00 BZLPBDC 279.00 BZLPBDC 279.00THEL 63.00 THEL 63.00 THEM 105.00 THEP 105.00 THEP 105.00Discount Schedule MCCB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-139

Molded Case Circuit BreakersAccessory LocationsSelectionLocations of Internally Mounted AccessoriesFrame Family Left Pocket Right PocketDG*, FG*, JG, LG150 to 600AUp to 3 Auxiliary SwitchesUp to 2 Auxiliary Switches + 1 Alarm SwichShunt Trip or UVR or up to 3 Auxiliary Switchesor up to 2 Auxiliary Switches + 1 Alarm SwitchShunt Trip or UVR or up to 3 Auxiliary Switchesor up to 2 Auxiliary Switches + 1 Alarm SwitchMG, NG, PG800 to 1600AUp to 4 Auxiliary SwitchesUp to 2 Auxiliary Switches + 2 Alarm SwichesShunt Trip or UVR or up to 4 Auxiliary SwitchesShunt Trip or UVR or up to 4 Auxiliary Switches* Except DG and FG breakers with Electronic Trip Units. Due to the location of the Magnetic Latch, the Left Pocket is not available for accessories.6MOLDED CASECIRCUIT BREAKERSAccessory Information▪ Aux. Switch is an Auxiliary Switch, 1Aor 1B contact▪ Alarm Switch has 1A or 1B contact▪ UVR is an Undervoltage Release▪ The standard location for factorymounted Auxiliary and Alarm Switchesis the Left Pocket▪ For 4-pole breakers, the 4th pole (locatedon the far left) can hold up to 3Auxiliary Switches on DG, FG, JG, andup to 4 Auxiliary Switches on MG, NG,and PG breakersAccessory MaximumsDG, FG, JG, LG Maximum Accessories:▪ Maximum of six (6) switches total▪ DG, FG Maximum of two (2) AlarmSwitches, one each in the Left andRight Pockets. JG, LG Max. of 1 Alarm,Left only▪ Maximum of three (3) switches combinedin 4th Pole and Left PocketsMG, NG, PG Maximum Accessories:▪ Maximum of eight (8) switches total▪ Maximum of two (2) Alarm Switches,Left Pocket only▪ Maximum of four (4) switches combinedin 4th Pole and Left Pockets6-140Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersSuffix for factory mounted Switch CombinationsSelectionThen addDeviceIf the frame is: And you need these functions: this suffix: Catalog Number1 Alarm SwitchDG, FG, JG or LG 1 NO Alarm A1 ASKL11 NC AlarmDG, FG, JG or LG2 Aux. Switches1 NO + 1 NC Aux. ContactsA2ASKL22 Aux. + 1 Alarm Switches1NO + 1NC Aux. and 1NO AlarmDG, FG, JG or LG 1NO + 1NC Aux. and 1NC Alarm A3 ASKL32NO Aux. and 1NC Alarm2NC Aux. and 1NO Alarm2 Aux. + 2 Alarm SwitchesMG, NG or PG1NO + 1NC Aux. and 1NO + 1NC Alarm2NO Aux. and 2NC AlarmA3ASKP32NC Aux. and 2NO AlarmMG, NG or PG4 Aux. Switches2NO + 2NC Aux.Suffix for factory mounted Shunt TripsA4ASKP4Then addDeviceIf the frame is: And you need these functions: this suffix: Catalog Number24V DC RB STRLB24DC48-60V DC RC STRLC60DC110-127V DC RD STRLD125DCDG, FG, JG or LG220-250V DC RE STRLE250DC48-60V AC RM STRLM60110-127V AC RN STRLN120208-277V AC RS STRLS277380-600V AC RV STRLV60024V DC RB STRPB24DC48-60V DC RC STRPC60DC110-127V DC RD STRPD125DCMG, NG or PG220-250V DC RE STRPE250DC48-60V AC RM STRPM60110-127V AC RN STRPN120208-277V AC RS STRPS277380-600V AC RV STRPV600Suffix for factory mounted Under Voltage ReleasesThen addDeviceIf the frame is: And you need these functions: this suffix: Catalog Number12V DC UA UVRLA12DC24V DC UB UVRLB24DC48V DC UC UVRLC48DC60V DC UG UVRLG60DC110-127V DC UD UVRLD125DC220-250V DC UE UVRLE250DCDG, FG, JG or LG 110-127V AC UN UVRLN120220-240V AC UR UVRLR240208V AC UP UVRLP208277V AC US UVRLS277380-415V AC UT UVRLT415440-480V AC UU UVRLU480600V AC UV UVRLV60012V DC UA UVRPA12DC24V DC UB UVRPB24DC48V DC UC UVRPC48DC60V DC UG UVRPG60DC110-127V DC UD UVRPD125DC220-250V DC UE UVRPE250DCMG, NG or PG 110-127V AC UN UVRPN120220-240V AC UR UVRPR240208V AC UP UVRPP208277V AC US UVRPS277380-415V AC UT UVRPT415440-480V AC UU UVRPU480600V AC UV UVRPV6006MOLDED CASECIRCUIT BREAKERSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-141

Technical Data6MOLDED CASECIRCUIT BREAKERSDG FG JG LG MG NG PGMax rated continuous current 150 250 400 600 800 1200 1600Rated operational voltageNEMA V AC 600 600 600 600 600 600 600IEC V AC 690 690 690 690 690 690 690Rated Impulse Withstand VoltageMain conducting paths kV 8 8 8 8 8 8 8Auxiliary circuits kV 4 4 4 4 4 4 4Ambient Temperature Range ºC -25 to +75 -25 to +75 -25 to +75 -25 to +75 -25 to +75 -25 to +75 -25 to +75High Ambient Derating (thermal-mag.) 50ºC 93% 93% 93% 93% 95% 95% 95%60ºC 86% 86% 86% 86% 86% 86% 80%70ºC 80% 80% 80% 80% 80% 80% 74%Operating Cycles 20,000 20,000 20,000 10,000 5,000 3,000 3,000Max switching rate (per hour) 120 120 120 60 60 30 30Power loss (at max. rated current)Thermal-magnetic W 15 – 48 32 – 80 60 – 175 85 – 230 170 – 250 150 – 220 200 – 260Electronic trip unit W 40 60 90 160 250 210 260IEC Time constant t = 10 ms1 current path 2 current paths 3 current pathsin series in seriesUp to 250V DC 440V DC 600V DC — — — — — — —NEMATime constant t = 8 ms2 poles switching 1 current path250V DC Max. 30 30 30 30 42 42 423 poles switching 2 current paths in series500V DC Max. 18 25 35 35 65 65 65AccessoriesAuxiliary/ Alarm SwitchCurrent rating (1 or 2 switches) 10 10 10 10 10 10 10Current rating (3 or 4 same switch) A 5 5 5 5 5 5 5Shunt TripPick-up voltage V 0.7 – 1.1 0.7 – 1.1 0.7 – 1.1 0.7 – 1.1 0.7 – 1.1 0.7 – 1.1 0.7 – 1.1Power Consumption (short-time) at:48 – 60 V AC VA 401 – 501 401 – 501 401 – 501 401 – 501 401 – 501 401 – 501 401 – 501110 – 127 V AC VA 424 – 489 424 – 489 424 – 489 424 – 489 424 – 489 424 – 489 424 – 489208 – 277 V AC VA 533 – 736 533 – 736 533 – 736 533 – 736 533 – 736 533 – 736 533 – 736380 – 600 V AC VA 408 – 645 408 – 645 408 – 645 408 – 645 408 – 645 408 – 645 408 – 64524 V DC W 594 594 594 594 594 594 59448 – 60 V DC W 740 – 925 740 – 925 740 – 925 740 – 925 740 – 925 740 – 925 740 – 925110 –127 V DC W 559 – 648 559 – 648 559 – 648 559 – 648 559 – 648 559 – 648 559 – 648220 – 250 V DC W 722 – 820 722 – 820 722 – 820 722 – 820 722 – 820 722 – 820 722 – 820Max. Operating time ms 50 50 50 50 50 50 50 Consult Siemens for short circuit values. Review individual frame and type values.6-142Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Technical DataDG FG JG LG MG NG PGUndervoltage TripDrop voltage (percentage) V 35% – 70% 35% – 70% 35% – 70% 35% – 70% 35% – 70% 35% – 70% 35% – 70%Pick-up voltage (percentage) V 70% – 85% 70% – 85% 70% – 85% 70% – 85% 70% – 85% 70% – 85% 70% – 85%Power consumption (continuous) at:110 – 127 V AC VA 1 1 1 1 1.1 1.1 1.1220 – 250 V AC VA 2.1 2.1 2.1 2.1 2.1 2.1 2.1208 V AC VA 1.2 1.2 1.2 1.2 1.2 1.2 1.2277 V AC VA 1.4 1.4 1.4 1.4 1.4 1.4 1.4380 – 415 V AC VA 1.9 1.9 1.9 1.9 1.9 1.9 1.9440 – 480 V AC VA 2.2 2.2 2.2 2.2 2.2 2.2 2.2500 – 525 V AC VA 2.5 2.5 2.5 2.5 2.5 2.5 2.5600 V AC VA 2.8 2.8 2.8 2.8 2.8 2.8 2.8Max. opening time ms 50 50 50 50 50 50 50Motorized Operating MechanismMotor with stored energy mechanism(synchronizable) X X X X X X XMotor Operator X XMax. switching rate (per hour) 120 120 120 60 60 30 30Command duration ms 20 – 50 20 – 50 20 – 50 20 – 50 20 – 50 — —Closing time ms

6MOLDED CASECIRCUIT BREAKERSMolded Case Circuit BreakersUnusual Operating ConditionsReferenceNote: The information provided on this and the next page is intended for reference and recommendation only. Because severalvariables can act on a circuit breaker’s performance at the same time, the data below is based less on controlled testing,than on experience and engineering judgment. Contact Siemens for further information on special conditions and treatment.High Ambient TemperaturesBecause thermal-magnetic trip breakersare temperature sensitive and calibratedfor a specific ambient of 40° C (104° F)(average enclosure temperature), ahigher ambient will cause the breaker totrip at lower current than its nameplaterating, in other words, causing thebreaker to “derate” (see Table 1).Similarly, the current carrying capacityof a circuit conductor is based upon acertain ambient temperature, a higherambient will reduce its current carryingcapacity, causing it to “derate.” Thus,with a fluctuating temperature, athermal-magnetic breaker will deratenearly parallel with its connected circuitconductors and maintain close circuitprotection. If the application temperatureexceeds 40° C (104° F) and is known,either a breaker specially calibrated forthe higher ambient or one oversizedaccording to Table 1 may be selected.In a case such as this, the circuitconductors should be oversized as well.Siemens Electronic Trip Unit Breakersare insensitive to temperature changes.However, they do include circuitry toprotect the components fromabnormally high temperatures.Moisture — CorrosionFor atmospheres having high moisturecontent and / or where fungus growth isprevalent, a special preventive treatmentmay be required.Where the air is heavily laden withcorrosive elements, breakers madewith special corrosion-resistantfinishes may be required.AltitudeReduced air density at altitudes greaterthan 6600 ft. (2000 meters) affects theability of a molded case circuit breakerto transfer heat and interrupt faults.Therefore, circuit breakers applied atthese altitudes should have interrupting,insulation and continuous currentsderated as indicated in Figure 1.Table 1 — Temperature Derating Data for Thermal-Magnetic BreakersReferenceAmpere Ampere Rating at:Rating at 25° C 50° C 60° C40° C (104° F) (77° F) (122° F) (140° F) Siemens Breaker Frames0015 0017 0013 00110020 0022 0018 00160025 0028 0023 0021BQ,0030 0033 0028 0026 BL,0035 0039 0030 0025 BQD,0040 0044 0037 00340050 0055 0046 0042CQD,0060 0066 0056 0052 NGG,0070 0077 0065 0060 NGB,0090 0099 0084 0078DGED0100 0110 0094 00870125 0137 0114 01000150 0165 0136 01200175 0192 0159 0140FG0200 0220 0182 01600225 0247 0205 01800250 0275 0235 02200300 0330 0276 02520350 0385 0325 0301JG0400 0440 0372 03400500 0550 0468 0435LG0600 0660 0564 05250700 0770 0658 0613MG0800 0880 0754 07040900 0990 0828 07491000 1100 0900 0825NG1200 1320 1090 10001400 1540 1304 11481600 1760 1500 13201800 1980 1690 14852000 2200 1880 1650Altitude in Feet (Meters)13,000 (4,000)12,000 (3,675)11,000 (3,350)10,000 (3,000)9,000 (2,750)8,000 (2,400)7,000 (2,100)PG6,000 (1,800)1.0 .95 .90 .85 .80 .75Rating Correction FactorFigure 1 — Altitude Adjustment6-144Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersUnusual Operating Conditions400 Hz Systems Siemens molded case circuit breakerscan be applied for overcurrent protectionon 400Hz systems, commonly used topower computer installations, aircraft,military and other specialty equipment.Below are basic guidelines.Circuit Breaker Derating RequiredThis table lists the maximum continuouscurrent carrying capacity for Siemensbreakers at 400Hz. Due to the increasedresistance of the copper sectionsresulting from the skin effect producedby eddy currents at these frequencies,circuit breakers in many cases requirederating. The thermal derating on thesedevices is based upon 100%,three phase application in open air in amaximum of 40° C (104° F) with 48 in.(1219 mm) of the specified cable or busat the line and load side. Additionalderating of not less than 20% will berequired if the circuit breaker is to beutilized in an enclosure. Further deratingmay be required if the enclosureambient temperature exceeds 40° C(104° F).Cable and Bus SizingThe cable and bus sizes to be utilizedat 400Hz are not based on standardNational Electric Codes tables for 60Hzapplication. Larger cross sections arenecessary at 400Hz. All bus barsspecified are based upon mountingthe bars in the vertical plane to allowmaximum air flow. All bus bars arespaced at a minimum of 0.25 in. (6 mm)apart. Mounting of bus bars in thehorizontal plane will necessitateadditional drafting. Edgewise orientationof the bus may change the maximumratings indicated. If additional informationis required for other connections of cableor bus, contact Siemens for information.Application RecommendationsIt is recommended that temperatures bemeasured on the line and load terminalsor T-connectors of the center pole. TheseReferenceare usually the hottest terminals with abalanced load. A maximum temperatureof 75° C (35° C over a maximum ambientof 40° C) would verify the particularapplication. Temperature profiles takenon these breakers can be correlated toensure that the hottest points withinthe breaker are within the requiredtemperature limits.Factory ConfigurationWhen required, molded case circuitbreakers may be factory calibrated for400Hz application. These breakers arespecially labeled for 400Hz usage andtheir nameplate current rating willinclude the necessary derating factory.The highest “Maximum ContinuousAmperes” rating at 400Hz, found in thetable below approximates the highestspecially calibrated 400Hz nameplateampere rating available for a givenframe size. Contact Siemens forordering information on otherbreakers applied in 400Hz systems.400Hz BreakersMaximum Continuous Ampere Rating75°C (167°F)At 40°C (104°F) CopperSiemens60HZ 400HZ Cable per PoleBreaker Enclosed No of WireType Open Air Open Air After Derating Pieces Size015 015 012 1 #14020 020 016 1 #1215 15 12 1 #1420 20 16 1 #1225 25 20 1 #1030 30 24 1 #1035 35 28 1 #1040 40 32 1 #8NGG, EG 45 43 34 1 #850 48 38 1 #860 57 46 1 #670 67 54 1 #480 76 61 1 #490 86 69 1 #3100 95 76 1 #3110 105 84 1 #2125 119 95 1 #150 48 38 1 #860 57 46 1 #670 63 50 1 #480 72 58 1 #4DG 90 80 64 1 #3100 90 72 1 #3110 95 75 1 #2125 105 84 1 #1150 125 100 1 #1/0100 90 72 1 #3110 95 75 1 #2125 105 84 1 #1FG150 125 100 1 #1/0175 140 112 1 #2/0200 160 128 1 #3/0225 180 144 1 #4/0250 200 160 1 250 kcmilMaximum Continuous Ampere Rating75°C (167°F)At 40°C (104°F) CopperSiemens60HZ 400HZ Cable per PoleBreaker Enclosed No of WireType Open Air Open Air After Derating Pieces Size250 210 168 1 250 kcmilJG300 240 192 1 350 kcmil350 260 208 1 500 kcmil400 300 240 2 #2/0250 210 210 1 250 kcmilJG 100% Rated300 240 240 1 350 kcmil350 260 260 1 500 kcmil400 300 300 2 #3/0400 300 240 2 #3/0LG 500 375 300 2 250 kcmil600 420 336 2 350 kcmil600 430 360 2 350 kcmilMG 700 500 400 3 250 kcmil800 560 448 3 300 kcmil600 430 430 2 350 kcmilMG 100% Rated 700 500 500 3 250 kcmil800 560 560 3 300 kcmil800 560 448 3 300 kcmilNG900 600 480 3 350 kcmil1000 650 520 3 400 kcmil1200 780 624 4 350 kcmil900 600 600 3 350 kcmilNG 100% Rated 1000 650 650 3 400 kcmil1200 780 780 4 350 kcmil1200 780 624 4 400 kcmilPG 1400 850 680 4 500 kcmil1600 960 768 5 500 kcmil1200 780 780 4 400 kcmilPG 100% Rated 1400 850 850 4 500 kcmil1600 960 960 5 500 kcmil6MOLDED CASECIRCUIT BREAKERSThe information provided on this page is intended forreference and recommendation only. Because severalvariables can act on a circuit breaker’s performanceat the same time, the data above is based less oncontrolled testing, than on experience and engineeringjudgment. Contact Siemens for further information onspecial conditions and treatment.Additional derating may be required if the ambienttemperature is greater than 40°C (104°F).Calculated after derating to compensate for the heatingof the copper conductor, caused by the skin effectgenerated by eddy currents produced at 400/415HZ.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-145

6MOLDED CASECIRCUIT BREAKERSSentron ® Molded Case Circuit BreakersSeries Connected Short Circuit RatingsThe term “Series Connected ShortCircuit Rating” refers to the application ofseries circuit breakers in a combinationthat allows downstream breakers to havelower individual interrupting ratings thanthe available fault current.240V Series RatingsMain BreakerBranch BreakerUL SeriesConnected Maximum NumberRating Type Amperes Type of Poles Amperes1 15–70QP, BQ, BL 2 15–1253 15–100070 (1P) QE, BLE,2 15–60QPH, BQH, 125 (2P) QPF, BLF, QAF, BAFBLH 100 (3P) QE, BLE, BE, QPF,1 15–30BQF, BLF, QAF, BAFQT 1, 2 15–40QG, BG 1, 2 15–301 15–70QP, BQ, BL2 15–125QE, BLE, BE, QPF,1 15–30BQF, BLF, QAF, BAFQPPH225 (2P)QE, BLE, BE,2 15–60QPF, BLF, QAF, BAFQPP 2 125–20022,000 QT 1, 2 15–4015–25135–70QP15–252QPMH200 (2P)35–1251 15–30QE, QPF, QAF, BAF2 15–60QT 2 15–301 15–70QP, BQ, BL 2 15–1253 60–100QJH2 225QPF, BQF, BLF, BG, BLG,(2 & 3P)1 15–30QE, BE, BLE, QAF, BAFQPF, BLF, BG, BLG,2 15–60QE, BE, BLE, QAF, BAFQT 1, 2 15, 20, 401 15–70QP, BQ, BL 2 15–1253 60–10042,000 QJ2H 2251 15–70QPH, BQH,(2 & 3P)2 15–125BLH3 15–100QJH2 2, 3 60–2251 15–70QP, BQ, BL,2 15–125QPH, BQH, BLH3 15–100QPF, BQF, BLF, BE,070 (1P) QPHF, BQHF, BLHF,1 15–30HQP, HBQ, HBL 125 (2P) QEH, BLEH, QE, BLE,100 (3P) QAFH, BAFH, QAF, BAFQEH, BLEH, QE, QPHF,65,000 BLHF, BLE, QPF, BLF, 2 15–60QAFH, BAFH, QAF, BAFThis is permitted as long as the seriescombination has been tested and certifiedby UL.The tables on these pages list specificmain and branch breaker combinationsthat may be used for the short circuitinterrupting ratings shown.QT 1, 2 15–40QG, BG 1, 2 15–30QP, BQ, BL, 1 15–70QPH, BQH, BLH 2 15–125HQPP 225 (2P) QPF, BQF, BLF, QPHF,BQHF, BLHF, QEH,1 15–30BLEH, QE, BLE, BE,QAFH, BAFH, QAF, BAFGeneralNo substitutions are permitted. All combinationsshown have been tested andare UL Listed. This information is providedas a reference tool only. For verificationof specific combination ratingsconsult the UL RecognizedComponents Directory.240V Series Ratings (Continued)Main BreakerBranch BreakerUL SeriesConnectedRating TypeMaximumAmperes TypeNumberof Poles AmperesQEH, BLEH, QE, QPHF,BLHF, BLE, QPF, BLF, 2 15–60QAFH, BAFH, QAF, BAFQT 1, 2 15–40QPPH, QPP 2 125–2001 15–70QP, BQ, BL,2 15–125QPH, BQH, BLH3 15–100QPHF, BQHF, BLHF,ED4, ED6QPF, BQF, BLF, QE,1 15–30QEH, BLEH, BE, BLE,100 (1P)QAFH, BAFH, QAF, BAF125 (2 & 3P)QEH, BLEH, QE, QPHF,BLHF, BLE, QPF, BLF, 2 15–60QAFH, BAFH, QAF, BAFED2 1, 2, 3 15–100QT 1, 2 15–401 15–70QP, BQ, BL,2 15–125QPH, BQH, BLH65,000 FD6-A, FXD6-A 250 (2 & 3P)3 15–100QPF, QPHF, BLF, BLHF,QAF, QAHF, BAF, BAHF1, 2 15–60(Continued) QJ2H, QJ2, QJH2 2, 3 60–225QPPH 2 125–2251 15–70JXD2-A, JD6-A,QPH, BQH, BLH 2 15–125JXD6-A, LD6-A, 600 (2 & 3P) 3 15–100LXD6-AQJ2H, QJH2 2, 3 60–225HJD6-A, HJXD6-AHLD6-A, HLXD6-A1 15–70HMD6, HMXD62000 QPH 2 15–125HND6, HNXD6(2 & 3P) 3 15–100HPD6, HPXD6HRD6, HRXD6SJD6-A, SLD6-A, 1 15–70SMD6, SND6, 1600 QPH, BQH, BLH 2 15–125SPD6 (2 & 3P) 3 15–100MD6, MXD61 15–70ND6, NXD62000 QPH, BQH, BLH 2 15–125PD6, PXD6(2 & 3P) 3 15–100RD6, RXD6QP, BQ, BL, 1 15–70QPH, BQH, BLH, 2 15–125HQP, HBQ, HBL 3 15–100QEH, BLEH, QE, BE,QPHF, BQHF, BLHF,QPF, BLF, BQF, BLE,1 15–30QAFH, BAFH, QAF, BAFHED4, HED6 125 (2 & 3P) QEH, BLEH, QPHF, QE,BLHF, QPF, BLF, BLE, 2 15–60100,000QAFH, BAFH, QAF, BAFED2 1, 2, 3 15–100ED4 1 15–100ED4, ED6 2, 3 15–125QT 1, 2 15–40HED4 100 (1P) ED2, ED4 1 15–1006-146Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Sentron ® Molded Case Circuit BreakersSeries Connected Short Circuit Ratings240V Series Ratings (Continued)UL SeriesMain BreakerBranch BreakerConnected Maximum NumberRating Type Amperes Type of Poles AmperesQP, BQ, BL,1 15–70QPH, BQH, BLH,2 15–125HQP, HBQ, HBLHQPP, QPPH, QPP 2 125–225QEH, BLEH, QE, BE,HQPPH225 (2P)QPHF, BQHF, BLHF,QPF, BQF, BLF, BLE,1 15–30QAFH, BAFH, QAF, BAFQE, QEH, BLEH, QPHF,BLHF, QPF, BLF, BLE, 2 15–60QAFH, BAFH, QAF, BAFQT 1, 2 15–40115–2535–70QP, BQ, BL15–25235–1253 15–1001 15–70QPH, BQH, BLH,2 15–125HQP, HBQ, HBL3 15–100HQJ2H 225 (2 & 3P)QEH, BLEH, QE, BE,QPHF, BQHF, BLHF,QPF, BQF, BLF, BLE,1 15–30QAFH, BAFH, QAF, BAFQEH, BLEH, QPHF, BLE,BLHF, QE, QPF, BLF, 2 15–60QAFH, BAFH, QAF, BAFQT 1 15–50100,000(Continued)QP, BQ, BL, 1 15–70QPH, BQH, BLH, 2 15–125HQP, HBQ, HBL 3 15–100QE, BE, BLE, QPHF,BQHF, BLHF, QPF, BQF, 1 15–30BLF, QEH, BLEH, BAF,QAFH, BAFH, QAFQPF, BLF, BLE, BLEH,HFD6, HFXD6 250 (2 & 3P) QPHF, BLHF, QEH, QE, 2 15–60QAFH, BAFH, QAF, BAFED4 1 15–100ED4, ED6 2, 3 15–125FD6-A, FXD6-A 2, 3 70–250QJ2, QJH2, QJ2H 2, 3 60–225HQPP, QPPH, QPP 2 125–225QT 1, 2 15–40ED4 1 15–100HJD6-A,ED4, ED6 2, 3 15–125HJXD6-A, 400 (2 & 3P) FD6-A, FXD6-A 2, 3 70–250SHJD6-AJD6-A, JXD6-A,JXD2-A, SJD6-A2, 3 200–400HLD6-AED4 1 15–100ED4, ED6 2, 3 15–125FD6-A, FXD6-A 2, 3 70–250JD6-A, JXD6-A,600 (2 & 3P) 2, 3JXD2-A, SJD6-A200–400LD6-A 2, 3 200–600LXD6-A 2, 3 450–600SLD6-A 3 300–600General240V Series Ratings (Continued)UL SeriesMain BreakerBranch BreakerConnectedRating TypeMaximumAmperes TypeNumberof Poles AmperesED4 1 15–100ED4, ED6 2, 3 15–125HLXD6-A 600 (2 & 3P)FD6-A FXD6-A 2, 3 70–250JD6-A, JXD6-A,JXD2-A, SJD6-A2, 3 200–400LD6-A 2, 3 200–600LXD6-A 2, 3 450–600SLD6-A 3 300–600ED4 1 15–100ED4, ED6 2,3 15–125FD6-A, FXD6-A 2, 3 70–250SHLD6-A 600 (3P)JD6-A, JXD6-A,JXD2-A, SJD6-A2, 3 200–400HMD6,HMXD6 800 (2 & 3P)LD6-A 2, 3 200–600LXD6-A 2, 3 450–600SLD6-A 3 300–600ED4 1 15–100ED4, ED6 2, 3 15–125FD6-A, FXD6-A 2, 3 70–250JD6-A, JXD6-A,JXD2-A, SJD6-A2, 3 200–400LD6-A 2, 3 200–600LXD6-A 2, 3 450–600SLD6-A 3 300–600MD6, MXD6 SMD6 2,3 500–800ED4 1 15–100100,000(Continued) ED4, ED6 2, 3 15–125FD6-A, FXD6-A 2, 3 70–250JD6-A, JXD6-A,SHMD6 800 (3P) JXD2-A, SJD6-A2, 3 200–400LD6-A 2, 3 200–600LXD6-A 2, 3 450–600SLD6-A 3 300–600MD6, MXD6, SMD6 2, 3 500–800ED4 1 15–100ED4, ED6 2, 3 15–125FD6-A, FXD6-A 2, 3 70–250JD6-A, JXD6-A,HND6, HNXD6, 1200 (2 & 3P)JXD2-A, SJD6-A2, 3 200–400SHND6 LD6-A 2, 3 200–600LXD6-A 2, 3 450–600SLD6-A 3 300–600MD6, MXD6, SMD6 2, 3 500–800ND6, NXD6, SND6 2, 3 500–1200ED4 1 15–100ED4, ED6 2, 3 15–125FD6-A, FXD6-A 2, 3 70–250JD6-A, JXD6-A,JXD2-A, SJD6-A2, 3 200–400HPD6, HPXD6, 1600 (3P) LD6-A 2, 3 200–600SHPDLXD6-A 2, 3 450–600SLD6-A 3 300–600MD6, MXD6, SMD6 2, 3 500–800ND6, NXD6, SND6 2, 3 500–1200PD6, PXD6, SPD6 2, 3 1200–16006MOLDED CASECIRCUIT BREAKERSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-147

6MOLDED CASECIRCUIT BREAKERSSentron ® Molded Case Circuit BreakersSeries Connected Short Circuit Ratings240V Series Ratings (Continued)UL Series Main Breaker Branch BreakerConnectedMaximumRating Type Amperes Type P AmperesED4 1 15–100ED4, ED6 2, 3 15–125FD6-A, FXD6-A 2, 3 70–250JD6-A, JXD6-A,JXD2-A, SJD6-A2, 3 200–400100,000 HRD6, HRXD6 2000 (3P) LD6-A 2, 3 200–600(Continued)LXD6-A 2, 3 450–600SLD6-A 3 300–600MD6, MXD6, SMD6 2, 3 500–800ND6, NXD6, SND6 2, 3 500–1200PD6, PXD6, SPD6 2, 3 1200–1600RD6, RXD6 2, 3 1600–2000QP, BQ, BL, 1 15–70QPH, BQH, BLH, 2 15–125HQP, HBQ, HBL 3 15–100QPHF, BQHF, BLHF,QPF, BQF, BLF, QEH, 1 15–30QE, BE, BLEH, QAFH,BLE, BAFH, QAF, BAFCED6 125 (2 & 3P) QEH, BLEH, QAFH, QE,QPHF, BLHF, QPF, BLE, 2 15–60BLF, BAFH, QAF, BAFED4, HED4 1 15–100ED4, ED6,HED4, HED62, 3 15–125QT 1, 2 15–40QP, BQ, BL, 1 15–70QPH, BQH, BLH, 2 15–125HQP, HBQ, HBL 3 15–100QPHF, BQHF, BLHF,QE, BE, BLE,QPF, BQF, BLF, 1 15–30QEH, BLEH, QAF, BAFQPHF, BLHF, QE,BLE, QPF, BLF, 2 15–60QEH, BLEH, QAF, BAF200,000 CFD6 250 (2 & 3P) ED2 1, 2, 3 15–100HED4, ED4 1 15–100ED4, ED6,HED4, HED62, 3 15–125FD6-A, FXD6-A,HFD6, HFXD62, 3 70–250HHJD6, HHJXD6, 600 (2 & 3P)HHLD6, HHLXD6QJ2H, QJH2, QJ2 2, 3 60–225QPPH, QPP 2 125–225QT 1, 2 15–40FD6-A, FXD6-A,HFD6, HFXD62, 3 70–250QPH, BQH, BLH, 2 100–125HQP, HBQ, HBL 3 –100ED4, ED6 2, 3 15–125CJD6-A 400 (2 & 3P)FD6-A, FXDG-A,HFD6, HFXD62, 3 70–250JXD2-A, JD6-A,JXD6-A, HJD6-A, 2, 3 200–400HJXD6-AQT 1, 2 15–30General240V Series Ratings (Continued)UL Series Main Breaker Branch BreakerConnectedMaximumRating Type Amperes Type P AmperesQPH, BQH, BLH, 2 100–125HQP, HBQ, HBL 3 100ED4, ED6 2, 3 15–25CLD6-A 600 (2 & 3P)FD6-A, FXD6-A,HFD6, HFXD62, 3 70–250JXD2-A, JD6-A,JXD6-A, HJD6-A, 2, 3 200–400HJXD6-ALD6-A, HLD6-A 2, 3 200–600LXD6-A, HJXD6-A 2, 3 450–600QT 1, 2 15–30ED4, ED6 1 15ED4, ED6,HED4, HED6 2, 315–125FD6-A, FXD6-A,HFD6, HFXD62, 3 70–250JXD2-A, JD6-A,JXD6-A, HJD6-A, 2, 3 200–400CMD6 800 (2 & 3P) HJXD6-ALD6-A, HLD6-A 2, 3 200–600LXD6-A, HLXD6-A 2, 3 450–600MD6, MXD6,HMD6, HMXD62, 3 500–800SCMD6 800 (3P)MD6, MXD6,HMD6, HMXD62, 3 500–800ED4, ED6 1 15ED4, ED6,HED4, HED62, 3 15–125FD6-A, FXD6-A,HFD6, HFXD62, 3 70–250JXD2-A, JD6-A,JXD6-A, HJD6-A, 2, 3 200–400200,000 CND6-A 1200 (2 & 3P) HJXD6-ALD6-A, HLD6-A 2, 3 200–600LXD6-A, HLXD6-A 2, 3 450–600MD6, MXD6,HMD6, HMXD62, 3 500–800ND6, NXD6, SND6,HND6, HNXD62, 3 500–1200MD6, HMD6,HMXD6, MXD6, 2, 3 500–800SCND61200 (3P)SHMD6, SMD6ND6, HND6,SHND6, NXD6, 2, 3 500–1200HNXD6, SND6FD6-A, FXD6-A,HFD6, HFXD62, 3 70–250JXD2-A, JD6-A,JXD6-A, HJD6-A, 2, 3 200–400HJXD6-ACPD6 1600 (3P) LD6-A, HLD6-A 2, 3 200–600LXD6-A, HLXD6-A 2, 3 450–600MD6, MXD6,HMD6, HMXD62, 3 500–800ND6, NXD6, SND6,HND6, HNXD62, 3 500–12006-148Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Sentron ® Molded Case Circuit BreakersSeries Connected Short Circuit Ratings480V Series RatingsUL SeriesMain BreakerBranch BreakerConnectedRating TypeMaximumAmperes TypeNumberof Poles Amperes18,000 ED4 125 (2 & 3P) BQD, CQD 1, 2, 3 15–10025,000 ED6 125 (2 & 3P) BQD, CQD 1, 2, 3 15–100BQD, CQD 1, 2, 3 15–10030,000 HED6 125 (2 & 3P) ED4 1 15–100ED4, ED6 2, 3 15–125BQD, CQD 1, 2, 3 15–10042,000 HED4 125 (2 & 3P) ED4 1 15–100ED4, ED6 2, 3 15–125HJD6-A, HJXD6-A,HLD6-A, 600 (2 & 3P) HED4 2, 3 15–50HLXD6-AFD6-A, FXD6-A 2, 3 70–250JD6-A, JXD6-A, 2, 3 200–400MD6, MXD6, 1200 (2 & 3P)SJD6-AND6, NXD6 LD6-A 2, 3 200–600LXD6-A 2, 3 450–600SLD6-A 3 400–600JD6-A, JXD6-A 2, 3 200–400SMD6, SND6, 1600 (3P) LD6-A 2, 3 200–600SPD6 LXD6-A 2, 3 450–60050,000 SLD6-A 3 400–60065,000PD6, PXD6RD6, RXD6HFD6, HFXD6 250 (2 & 3P)HJD6-A,HJXD6-AHLD6-A,HLXD6-AHMD6, HMXD6 800 (2 & 3P)14–1600 (3P) FD6-A, FXD6-A 2, 3 70–250JD6-A, JXD6-A,SJD6-A2, 3 200–4001600 (3P) LD6-A 2, 3 200–600LXD6-A 2, 3 450–600SLD6-A 3 400–600FD6-A, FXD6-A 2, 3 70–250JD6-A, JXD6-A,SJD6-A2, 3 200–40018–2000 (3P)LD6-A 2, 3 200–600LXD6-A 2, 3 450–600SLD6-A 3 400–600BQD, CQD 1, 2, 3 15–100ED4, HED4 1 15–100ED4, ED6,HED42, 3 15–125HED4, ED4 1 15–100400 (2 & 3P) FD6-A, FXD6-A 2, 3 70–250JD6-A, JXD6-A 2, 3 200–400ED4, HED4 1 15–100FD6-A, FXD6-A 2, 3 70–250600 (2 & 3P) JD6-A, JXD6-A 2, 3 200–400LD6-A 2, 3 200–600LXD6-A 2, 3 450–600FD6-A, FXD6-A 2, 3 70–250JD6-A, JXD6-A 2, 3 200–400LD6-A 2, 3 200–600LXD6-A 2, 3 450–600FD6-A, FXD6-A 2, 3 70–250JD6-A, JXD6-A 2, 3 200–400HND6, HNXD6 1200 (2 & 3P) LD6-A 2, 3 200–600LXD6-A 2, 3 450–600MD6, MXD6, SMD6 2, 3 500–800HPD6, HPXD6 14–1600 (3P) FD6-A, FXD6-A 2, 3 70–250General480V Series Ratings (Continued)Main BreakerBranch BreakerUL SeriesConnected Maximum NumberRating Type Amperes Type of Poles AmperesFD6-A, FXD6-A 2, 3 70–25065,000JD6-A, JXD6-A 2, 3 200–400HRD6, HRXD6 18–2000 (3P)(Continued) LD6-A 2, 3 200–600LXD6-A 2, 3 450–600CFD6 250 (2 & 3P)BQD, CQD 1 15–1002, 3 15–30HHJXD6, HHJD6,ED4, ED6, 1 15–100HHLD6, 600 (2 & 3P)HED4HHLXD6 HFD6, HFXD6 2, 3 70–250FD6-A, FXD6-A,HFD6, HFXD62, 3 70–250JD6-A, HJD6-A,2, 3 200–400JXD6-A, HJXD6-ACMD6800 (3P)100,000LD6-A, HLD6-A 2, 3 200–600LXD6-A, HLXD6-A 2, 3 450–600MD6, MXD6,HMD6, HMXD62, 3 500–800SCMD, SCND6 1200 (3P) HFD6, HFXD6 2, 3 70–250FD6-A, FXD6-A,HFD6, HFXD62, 3 70–250JD6-A, HJD6-A,JXD6-A, HJXD6-A2, 3 200–400CND6 1200 (3P) LD6-A, HLD6-A 2, 3 200–600LXD6-A, HLXD6-A 2, 3 450–600MD6, MXD6,HMD6, HMXD62, 3 500–800ND6, NXD6,HND6, HNXD62, 3 500–1200CPD61600 (3P)FD6-A, FXD6-A,HFD6, HFXD62, 3 70–250ED4 1 15–100HFD6, HFXD6 2, 3 70–250CJD6-A 400 (2 & 3P)JD6-A, HJD6-A,2, 3 200–400JXD6-A, HJXD6-A150,000ED4 1 15–100HFD6, HFXD6 2, 3 70–250CLD6-A 600 (2 & 3P)JD6-A, HJD6-A,JXD6-A, HJXD6-A2, 3 200–400LD6-A, HLD6-A 2, 3 200–600LXD6-A, HLXD6-A 2, 3 450–600BQD, CQD 1 15–1002, 3 20–30CED6 125 (2 & 3P) ED4, HED4 1 15–100ED4, ED6,HED42, 3 15–1251 15–100BQD, CQD200,000 2, 3 20–30CFD6 250 (2 & 3P)ED4, ED6 2,3 15–50ED4, HED4 1 15–100HED4 2, 3 15–125FD6-A, FXD6-A,HFD6, HFXD62, 3 70–2506MOLDED CASECIRCUIT BREAKERS BQD & CQD breakers (2, 3P) are series ratedfrom 15–100A for Series 7A, S2, S3, and P1panelboard applications only.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-149

6MOLDED CASECIRCUIT BREAKERSSentron ® Molded Case Circuit BreakersSeries Connected Short Circuit Ratings240 Volt Fuse Series RatingsMain BreakerBranch BreakerUL SeriesConnected Maximum NumberRating Type Amperes Type of Poles AmperesJ, R 15–600 (1, 2, 3P) QPH, BQH, BLH 1, 2, 3 15–12565,000 T 15–1200 (1, 2, 3P) QPH, BQH, BLH 1, 2, 3 15–125100,000 TL 601–6000 (1, 2, 3P) QPH, BQH, BLH 1, 2, 3 15–125T(300V)QP, BQ, BL 1, 2, 3 15–125HQP, HBQ, HBL,QPH, BQH, BLH3 15–10015–200 (1, 2, 3P)QPF, BQF, BLF, QPHF,QE, BE, BLE, QEH,BLEH, BLHF, BQHF,1 15–30QAFH, BAFH, QAF, BAF15–600 (1, 2, 3P)QEH, BLEH, QE, QPF,QPHF, BLHF, BLE, BLF, 2 15–60QAFH, BAFH, QAF, BAFQT 1, 2 15–50QPH, BQH, BLH,HQP, HBQ, HBL1, 2 15–125ED4, HED4 1 15–10015–600 (2, 3P) ED4, ED6,HED42, 3 15–12570–600 (2, 3P) FD6-A, FXD6-A 2, 3 70–250J, R JD6-A, JXD6-A,200–600 (2, 3P) JXD2-A, SJD6-A2, 3 200–400LD6-A 2, 3 200–600300–600 (3P) SLD6-A 3 300–600450–600 (2, 3P) LXD6-A 2, 3 450–60015–1200 (2, 3P) ED4, HED4 1 15–100ED4, ED6,HED42, 3 15–12570–1200 (2, 3P) FXD6-A, FD6-A 2, 3 70–250450–1200 (2, 3P) LXD6-A 2, 3 450–600JD6-A, JXD6-A,200–1200 (2, 3P) JXD2-A, SJD6-A2, 3 200–400LD6-A 2, 3 200–600300–1200 (3P) SLD6-A 3 300–600ED4, HED4 1 15–100ED4, ED6,HED42, 3 15–125FD6-A, FXD6-A 2, 3 70–250JD6-A, JXD6-A,JXD2-A, SJD6-A2, 3 200–400L 601–6000 (2, 3P) LD6-A 2, 3 200–600LXD6-A 2, 3 450–600SLD6-A 3 300–600SMD6 3 500–800SND6 3 500–1200PD6, PXD6, SPD6 3 1200–1600RD6, RXD6 3 1600–2000R 125–200 (2, 3P) QJH2, QJ2H, QJ2 2, 3 125–200T, J 125–600 (2, 3P) QJH2, QJ2H 2, 3 125–225200,000 125–400 (2, 3P) QJ2 2, 3 125–225J, R 70–600 (2, 3P) HFD6, HFXD6 2, 3 70–250General240 Volt Series Ratings (Continued)Main BreakerBranch BreakerUL SeriesConnected Maximum NumberRating Type Amperes Type of Poles AmperesT 70–1200 (2, 3P) HFD6, HFXD6 2, 3 70–250HFD6, HFXD6 2, 3 70–250200,000 L 601–6000 (2, 3P)MD6, MXD6,HMD6, HMXD62, 3 500–800ND6, NXD6,HND6, HNXD62, 3 500–1200480 Volt Fuse Series RatingsMain BreakerBranch BreakerUL SeriesConnected Maximum NumberRating Type Amperes Type of Poles Amperes50,000 J60–400 (1, 2, 3P) ED4 1 60–10015–400 (2, 3P) ED4 2, 3 15–100J 15–400 (1, 2, 3P) ED4 1 15–50T, J 70–600 (2, 3P) FD6-A, FXD6-A 2, 3 70–250J, R 70–600 (2, 3P) HFD6, HFXD6 2, 3 70–250JD6-A, JXD6-A2, 3 200–400HJD6-A, HJXD6-AT, J, 200–600 (2, 3P)LD6-A, HLD6-A 2, 3 200–600R450–600 (2, 3P) LXD6-A, HLXD6-A 2, 3 450–600100,000 T 70–1200 (2, 3P) HFD6, HFXD6 2, 3 70–250JD6-A, JXD6-A2, 3 200–400HJD6-A, HJXD6-AT, L 601–1200 (2, 3P)LD6-A, HLD6-A 2, 3 200–600200,000LXD6-A, HLXD6-A 2, 3 450–600HFD6, HFXD6 2, 3 70–250L 601–6000 (2, 3P)MD6, MXD6,HMD6, HMXD62, 3 500–800ND6, NXD6,HND6, HNXD62, 3 500–1200R 15–100 (1, 2, 3P)T, J 15–200 (1, 2, 3P)BQD, CQD 1 15–100BQD, CQD 2, 3 20–30BQD, CQD 1 15–100BQD, CQD 2, 3 20–30 BQD & CQD breakers are series rated from 15–100A forSeries 7A, S2, S3, and P1 panelboard applications only.6-150Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersUnusual Operating ConditionsReferenceNote: The information provided on this and the next page is intended for reference and recommendation only. Because severalvariables can act on a circuit breaker’s performance at the same time, the data below is based less on controlled testing,than on experience and engineering judgment. Contact Siemens for further information on special conditions and treatment.High Ambient TemperaturesBecause thermal-magnetic trip breakersare temperature sensitive and calibratedfor a specific ambient of 40° C (104° F)(average enclosure temperature), ahigher ambient will cause the breaker totrip at lower current than its nameplaterating, in other words, causing thebreaker to “derate” (see Table 1).Similarly, the current carrying capacityof a circuit conductor is based upon acertain ambient temperature, a higherambient will reduce its current carryingcapacity, causing it to “derate.” Thus,with a fluctuating temperature, athermal-magnetic breaker will deratenearly parallel with its connected circuitconductors and maintain close circuitprotection. If the application temperatureexceeds 40° C (104° F) and is known,either a breaker specially calibrated forthe higher ambient or one oversizedaccording to Table 1 may be selected.In a case such as this, the circuitconductors should be oversized as well.Siemens Sensitrip ® III and Type SBEncased Systems Breakers areinsensitive to temperature changes.However, they do include circuitry toprotect the components fromabnormally high temperatures.Moisture — CorrosionFor atmospheres having high moisturecontent and / or where fungus growth isprevalent, a special preventive treatmentmay be required.Where the air is heavily laden withcorrosive elements, breakers madewith special corrosion-resistantfinishes may be required.AltitudeReduced air density at altitudes greaterthan 6600 ft. (2000 meters) affects theability of a molded case circuit breakerto transfer heat and interrupt faults.Therefore, circuit breakers applied atthese altitudes should have interrupting,insulation and continuous currentsderated as indicated in Figure 1.Table 1 — Temperature Derating Data for Thermal-Magnetic BreakersReferenceAmpere Ampere Rating at:Rating at 25° C 50° C 60° C40° C (104° F) (77° F) (122° F) (140° F) Siemens Breaker Frames0015 0017 0013 00110020 0022 0018 00160025 0028 0023 0021BQ,0030 0033 0028 0026 BL,0035 0039 0030 0025 BQD,0040 0044 0037 00340050 0055 0046 0042CQD,0060 0066 0056 0052 NGG,0070 0077 0065 0060 NGB,0090 0099 0084 00780100 0110 0094 0087ED0125 0137 0114 0100QJ0150 0165 0136 0120FD0175 0192 0159 01400200 0220 0182 01600225 0247 0205 01800250 0275 0235 02200300 0330 0276 0252JD0350 0385 0325 03010400 0440 0372 0340LD0500 0550 0468 04350600 0660 0564 05250700 0770 0658 0613MD0800 0880 0754 07040900 0990 0828 07491000 1100 0900 0825ND1200 1320 1090 10001400 1540 1304 1148PD1600 1760 1500 13201800 1980 1690 14852000 2200 1880 1650Altitude in Feet (Meters)13,000 (4,000)12,000 (3,675)11,000 (3,350)10,000 (3,000)9,000 (2,750)8,000 (2,400)7,000 (2,100)6,000 (1,800)RD6MOLDED CASECIRCUIT BREAKERS1.0 .95 .90 .85 .80 .75Rating Correction FactorFigure 1 — Altitude AdjustmentSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-151

Molded Case Circuit BreakersUnusual Operating Conditions400 Hz Systems Siemens molded case circuit breakerscan be applied for overcurrent protectionon 400Hz systems, commonly used topower computer installations, aircraft,military and other specialty equipment.Below are basic guidelines.Circuit Breaker Derating RequiredThis table lists the maximum continuouscurrent carrying capacity for Siemensbreakers at 400Hz. Due to the increasedresistance of the copper sectionsresulting from the skin effect producedby eddy currents at these frequencies,circuit breakers in many cases requirederating. The thermal derating on thesedevices is based upon 100%,three phase application in open air in amaximum of 40° C (104° F) with 48 in.(1219 mm) of the specified cable or busat the line and load side. Additionalderating of not less than 20% will berequired if the circuit breaker is to beutilized in an enclosure. Further deratingmay be required if the enclosureambient temperature exceeds 40° C(104° F).Cable and Bus SizingThe cable and bus sizes to be utilizedat 400Hz are not based on standardNational Electric Codes tables for 60Hzapplication. Larger cross sections arenecessary at 400Hz. All bus barsspecified are based upon mountingthe bars in the vertical plane to allowmaximum air flow. All bus bars arespaced at a minimum of 0.25 in. (6 mm)apart. Mounting of bus bars in thehorizontal plane will necessitateadditional drafting. Edgewise orientationof the bus may change the maximumratings indicated. If additional informationis required for other connections of cableor bus, contact Siemens for information.Application RecommendationsIt is recommended that temperatures bemeasured on the line and load terminalsor T-connectors of the center pole. TheseReferenceare usually the hottest terminals with abalanced load. A maximum temperatureof 75° C (35° C over a maximum ambientof 40° C) would verify the particularapplication. Temperature profiles takenon these breakers can be correlated toensure that the hottest points withinthe breaker are within the requiredtemperature limits.Factory ConfigurationWhen required, molded case circuitbreakers may be factory calibrated for400Hz application. These breakers arespecially labeled for 400Hz usage andtheir nameplate current rating willinclude the necessary derating factory.The highest “Maximum ContinuousAmperes” rating at 400Hz, found in thetable below approximates the highestspecially calibrated 400Hz nameplateampere rating available for a givenframe size. Contact Siemens forordering information on otherbreakers applied in 400Hz systems.6MOLDED CASECIRCUIT BREAKERS400Hz BreakersMaximum Continuous Ampere Rating75°C (167°F)At 40°C (104°F) CopperSiemens60HZ 400HZ Cable per PoleBreaker Enclosed No of WireType Open Air Open Air After Derating Pieces Size015 015 012 1 #14020 020 016 1 #12025 025 020 1 #10030 030 024 1 #10035 035 028 1 #10040 040 032 1 #8ED2, ED4, ED6, 045 043 034 1 #8BQD, HED4, 050 048 038 1 #8HED6, CED6 060 057 046 1 #6070 067 054 1 #4080 076 061 1 #4090 086 069 1 #3100 095 076 1 #3110 105 084 1 #2125 119 095 1 #1070 063 050 1 #4080 072 058 1 #4090 080 064 1 #3QJ2, QJH2,100 090 072 1 #3QJ2H, HQJ2HFD6, FXD6, 110 095 075 1 #2HFD6, HFXD6, 125 105 084 1 #1CFD6 150 125 100 1 #1/0175 140 112 1 #2/0200 160 128 1 #3/0225 180 144 1 #4/0250 200 160 1 250 kcmil200 170 136 1 #3/0JXD2, JD6,225 190 152 1 #4/0JXD6, HJD6, 250 210 168 1 250 kcmilHJXD6, HHJD6, 300 240 192 1 350 kcmilHHJXD6, CJD6350 260 208 1 500 kcmil400 300 240 2 #3/0200 170 170 2 #3/0225 190 190 2 #4/0JD6, JXD6,HJD6, HJXD6 250 210 210 1 250 kcmil100% Rated 300 240 240 1 350 kcmil350 260 260 1 500 kcmil400 300 300 2 #3/0The information provided on this page is intended forreference and recommendation only. Because severalvariables can act on a circuit breaker’s performance atthe same time, the data above is based less oncontrolled testing, than on experience and engineeringjudgment. Contact Siemens for further information onspecial conditions and treatment.Additional derating may be required if the ambientMaximum Continuous Ampere Rating75°C (167°F)At 40°C (104°F) CopperSiemens60HZ 400/415HZ Cable per PoleBreaker Enclosed No of WireType Open Air Open Air After Derating Pieces Size0250 0210 168 1 250 kcmilLD6, LXD6,HLD6, HLXD6,HHLD6,HHLXD6,CLD6LD6, LXD6,HLD6, HLXD6,100% RatedMD6, MXD6,HMD6,HMXD6, CMD6MD6, MXD6,HMD6,HMXD6, CMD6100% RatedND6, NXD6HND6, HNXD6,CND6ND6, NXD6HND6, HNXD6,CND6100% RatedPD6, PXD6,HPD6, HPXD6,CPD6,PD6, PXD6,HPD6, HPXD6,CPD6100% RatedRD6, RXD6,HRD6, HRXD680% Rated0300 0240 192 1 350 kcmil0350 0260 208 1 500 kcmil0400 0300 240 2 #3/00450 0340 272 2 #4/00500 0375 300 2 250 kcmil0600 0420 336 2 350 kcmil0250 0210 210 1 250 kcmil0300 0240 240 1 350 kcmil0350 0260 260 1 500 kcmil0400 0300 300 2 #3/00450 0340 340 2 #4/00500 0375 375 2 250 kcmil0600 0420 420 2 350 kcmil0500 0400 320 2 250 kcmil0600 0430 360 2 350 kcmil0700 0500 400 3 250 kcmil0800 0560 448 3 300 kcmil0500 0400 400 2 250 kcmil0600 0430 430 2 350 kcmil0700 0500 500 3 250 kcmil0800 0560 560 3 300 kcmil0800 0560 448 3 300 kcmil0900 0600 480 3 350 kcmil1000 0650 520 3 400 kcmil1200 0780 624 4 350 kcmil0900 0600 600 3 350 kcmil1000 0650 650 3 400 kcmil1200 0780 780 4 350 kcmil1200 0780 624 4 400 kcmil1400 0850 680 4 500 kcmil1600 0960 768 5 500 kcmil1200 0780 780 4 400 kcmil1400 0850 850 4 500 kcmil1600 0960 960 5 500 kcmil1600 0960 768 5 500 kcmil1800 1080 864 5 500 kcmil2000 1200 960 6 500 kcmiltemperature is greater than 40°C (104°F).Calculated after derating to compensate for the heatingof the copper conductor, caused by the skin effectgenerated by eddy currents produced at 400/415HZ.6-152Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersIEC 947-2 ® AC Interrupting Ratings, 50/60 HZ KAReferenceAmpere Breaker Breaker 220/240 Volts 380/415 Volts 500 VoltsRating Frame Type Icu Ics Icu Ics Icu Ics15-125 ED ED6 65 17 35 9 18 5FXD6 65 33 35 18 20 10FD6 65 33 35 18 20 1070-250 FDHFD6 100 50 65 33 42 21HFXD6 100 50 65 33 42 21HHFD6 200 100 100 50 65 33HHFXD6 200 100 100 50 65 33JXD6(A) 65 33 40 20 30 15JD6(A) 65 33 40 20 30 15HJD6(A) 100 50 65 33 42 21HJXD6(A) 100 50 65 33 42 21250-400 JDHHJD6 200 100 100 50 65 33 bHHJXD6 200 100 100 50 65 33 bCJD6 — — — — — —SJD6(A) 65 33 40 20 30 15SHJD6(A) 100 50 65 33 42 21SCJD6 — — — — — —LXD6(A) 65 33 40 20 30 15LD6(A) 65 33 40 20 30 15HLD6(A) 100 50 65 33 42 21HLXD6(A) 100 50 65 33 42 21400-600 LDHHLD6(A) 200 100 100 50 65 33 bHHLXD6 200 100 100 50 65 33 bCLD6 — — — — — —SLD6(A) 65 33 40 20 30 15SHLD6(A) 100 50 65 33 42 21SCLD6 — — — — — —LMXD6 65 33 40 20 30 15600-800 LMDLMD6 65 33 40 20 30 15HLMXD6 100 50 65 33 42 21HLMD6 100 50 65 33 42 21MXD6 65 33 40 20 30 15MD6 65 33 40 20 30 15HMXD6 100 50 65 33 42 21600-800 MDHMD6 100 50 65 33 42 21CMD6 200 100 100 50 65 33SMD6 65 33 40 20 30 15SHMD6 100 50 65 33 42 21SCMD6 200 100 100 50 65 33NXD6 65 33 40 20 30 15ND6 65 33 40 20 30 15HNXD6 100 50 65 33 42 21800-1200 NDHND6 100 50 65 33 42 21CND6 200 100 100 50 65 33SND6 65 33 40 20 30 15SHND6 100 50 65 33 42 21SCND6 200 100 200 50 65 33PXD6 65 33 40 10 30 8PD6 65 33 40 10 30 8HPXD6 100 50 65 17 42 111200-1600 PD HPD6 100 50 65 17 42 11CPD6 200 100 100 25 65 17SPD6 — — — — — —SHPD6 — — — — — —RXD6 65 33 40 10 30 81600-2000 RDRD6 65 33 40 10 30 8HRXD6 100 50 65 17 42 11HRD6 100 50 65 17 42 116MOLDED CASECIRCUIT BREAKERSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-153

Molded Case Circuit BreakersTypical SpecificationsReferenceGeneral SpecificationsMolded case circuit breakers shall provide circuit overcurrent protection withinverse time and instantaneous tripping characteristics and shall be SiemensSentron, Sensitrip or approved equal.6MOLDED CASECIRCUIT BREAKERSAll circuit breakers shall be listed by Underwriters’ Laboratories, Inc., conformto applicable requirements of NEMA Standard Publication No. AB1 and meetappropriate classifications of Federal Specifications W C 375B/Gen.All circuit breakers shall have a quick-make, quick-break over center toggle typemechanism and the handle mechanism shall be trip free to prevent holding contactsclosed against a short circuit or sustained overload. All circuit breaker handles shallassume a position between “ON” and “OFF when tripped automatically. Multi-polecircuit breakers shall be common-trip such that an overload or short circuit on anyone pole will result in all poles opening simultaneously. Arc extinction is to beaccomplished by magnetic arc chutes. All ratings are to be clearly visible. Whenreverse feed is indicated on the drawings, in accordance with UL, circuit breakerswith sealed trip units shall be supplied.Thermal Magnetic SpecificationsUnless otherwise noted on the drawings, all Circuit breakers 2000 Ampereand below shall have thermal-magnetic trip units, with inverse time-currentcharacteristics. Automatic operation of these circuit breakers shall be obtained bymeans of thermal-magnetic tripping devices located in each pole providing inversetime delay and instantaneous circuit protection. Circuit breakers shall be ambientcompensating in that, as the ambient temperature increases over 40°C, the circuitbreaker automatically derates itself so as to better protect its associated conductor.Thermal magnetic breakers from 250 to 2000A frames shall have thermalinterchangeable trip units, with instantaneous magnetic trip settings that areadjustable and accessible from the front of all circuit breakers on frame sizes 250Amperes and above. Where indicated, provide circuit breakers UL listed forapplication at 100% of their continuous ampere rating in their intended enclosure.Motor Circuit ProtectorsWhere indicated on the drawings and in the combination motor starter/motorcontrol center schedule, furnish instantaneous magnetic trip only circuit breakersfor motor short circuit protection. The magnetic trips shall be adjustable andaccessible from the front of all circuit breakers frames. The continuous currentrating shall be between 1 and 800 Amperes as indicated on the drawing.Solid State Sensing SpecificationsAs indicated on the drawings, circuit breaker frames400 Ampere through 3200-Ampere shall havemicroprocessor-based RMS sensing trip units, withthe capability to measure through to the 21st harmonic.Automatic operation of all circuit breaker frames 400Aand larger shall be obtained by means of solid statetripping elements providing inverse time delay and(instantaneous) and/or (short-time delay) circuitprotection. Continuous current ratings shall be adjustablefrom 20% to 100% of the trip unit rating, without the needfor a rating plug. Long-time delay and instantaneous tripshall be adjustable. The optional short-time trip functionshall have adjustable pick-up settings, three fixed times,and I 2 t ramp. Circuit breaker frames 400A and larger, andwhere indicated on the drawings, shall be 100% equipmentrated.Integral GroundFault OptionMain and feeder circuit breakers, as indicated on thedrawings, shall be provided with integral ground faultprotection. Ground fault pick-up shall be adjustable from20% to 70% of the circuit breakers maximum continuouscurrent rating. Ground fault time delay shall be adjustablewith three 1 2 t ramps.Metering OptionWhen indicated on the drawings, solid state trip breakersshall be furnished with a plug-in or panel mountedmetering device. This device shall simultaneously displayall three phase currents, as well as average current,ground current, and phase unbalance. In addition it shalldisplay breaker status, a max log, and a trip log. The triplog will retain and display date, time and type of trip(overload, short circuit or ground fault) for the mostrecent 5 trip events.The interrupting rating of the circuit breakers shall be as indicated in thespecifications, and shown on the drawing or single line diagram. The interruptingrating of the circuit breakers shall be at least equal to the available short circuitcurrent at the line terminals of the circuit breaker and correspond to the UL listedintegrated short circuit current rating specified.Internal AccessoriesProvide shunt trips, bell alarms, and auxiliary switches as shown on the contractdrawings. Gold plated auxiliary switches shall be supplied for PLC connection. Internalaccessories for all breakers shall be UL listed for field installation and modification.Current Limiting SpecificationsWhere indicated on the drawings, Siemens currentlimiting circuit breakers are to be furnished. Currentlimiting circuit breakers shall limit the let-through I 2 t to avalue less than the I 2 t of one-half cycle wave of thesymmetrical prospective current without any fusibleelements when operating within its current range.Series Connected Combination SpecificationsWhere protective devices are applied in series combination,such that the prospective available fault current exceedsthe interrupting rating (AIR) of the downstream protectivedevices, such combinations shall be UL recognizedcombinations. All electrical equipment using these ULrecognized circuit breaker combinations shall be clearlymarked in accordance with NEC Section 240-83(c).Connection AccessoriesUnless otherwise noted, Mechanical lugs shall be provided with all Molded CaseBreakers. Where indicated on the drawings, compression lugs shall be provided on1200 Ampere frame and below circuit breakers. All compression lugs shall besupplied by the Circuit Breaker Manufacturer. Where indicated on the drawings,UL listed plug-in or rear connectors shall be supplied.6-154Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersSuperseded BreakersGeneralSentron Series Note Superseded Note SupersededCED62B015-CED62B125CLE62B015-CLE62B100CE2B015-CE2B100CED62S100ACLE62S100CE2S100CED63A001-CED63A125CLE63A001-CLE63A125CED63B015-CED63B125CLE63B015-CLE63B100CE3B015-CEB100CED63S100ACLE63S100CE3S100HHED62B015-HHED62B125HED62B015-HED62B125HHED63B015-HHED63B125HED63B015-HED63B125CFD62A150, CFD62L150, CFD62A250CLF62A150, CLF62A250CFD62B070-CFD62B250CLF62B070-CLF62B240CJ2B125-CJ2B250CFD62S250ACLF62S250CFD63A150, CFD63L150, CFD63A250CLF63A150, CLF63A250CFD63B070-CFD63B250CLF63B070-CLF63B250CJ3B125-CJ3B250CFD63S250ACLF63S250CJD62B200-CJD62B400CLJ62B100-CLJ62B400CJ2B300-CJ2B400CJD62H400, CJD62L400CLJ62L400, CLJ62H400CJD62S400ACLJ62S400CJ2S400CJD63B200-CJD63B400CLJ63B200-CLJ63B400CJ3B300-CJ3B400CJD63H400, CJD63L400CLJ63L400, CLJ63H400CJD63S400ACLJ63S400CJ3S400CPD63B120-CPD63B160CP3B120-CP3B160ED21B015-ED21B100E21B015-E21B100EE1B015-EE1B100ED22B015-ED22B100E22B015-E22B100EE2B015-EE2B100ED22S100AE22S100AEE2S100ED23B015-ED23B100E23B015-E23B100EE3B015-EE3B100ED23S100AE23S100AEE3S100ED41B015-ED41B100E41B015-E41B100EH1B015-EH1B100ED42B015-ED42B125E42B015-E42B100EH2B015-ED2B125ED42S100AE42S100EH2S100ED43B015-ED43B125E43B015-E43B100EH3B015-EH3B100ED43S100AE43S100EH3S100ED61B015-ED61B100E61B015-E61B100EF1B015-EF1B020ED62B015-ED62B125E62B015-E62B100EF2B015-EF2B100ED62S100AE62S100AEF2S100ED63A001-ED63A125E63A001-E63A125EF3A003, EF3J050, EF3L050-EF3A100, EF3H1ED63B015-ED63B125E63B015-E63B100EF3B015-EF3B100ED63S100AE63S100AEF3S100HHED62B015-HHED62B125HED62B015-HED62B125HHED63B015-HHED63B125HED63B015-HED63B125FD62B070-FD62B250 F62B070, F62B250FD63B070-FD63B250 F63B070-F63B250FXD62A150, FXD62L150, FXD62A250FJ62A150, FJ62L150-FJ62A250FXD62B070-FXD62B250 FJ62B070-FJ62B250FJ2B070-FJ2B225FXD62S250AFJ62S250FJ2S225FXD63A150, FXD63L150, FXD63A250FJ63A150, FJ63L150-FJ63A250FJ3A225FXD63B070-FXD63B250 FJ63B070-FJ63B250FJ3B070-FJ3B225FXD63S250AFJ63S250FJ3S225HED41B015-HED41B100HE41B015-HE41B100HED42B015-HED42B125HE42B015-HE42B100HED43B015-HED43B125HE43B015-HE43B100HED61B015-HED61B100HE61B015-HE61B100HED62B015-HED62B125HE62B015-HE62B110HE2B015-HE2B100HED63B015-HED63B125HE63B015-HE63B100HE3B015-HE3B100HFD62B070-HFD62B250HF62B070-HF62B250HFD63B070-HFD63B250HF63B070-HF63B250HHED62B015-HHED62B125HED62B015-HED62B125HHED63B015-HHED63B125HED63B015-HED63B125HJD63B200-HJD63B400HJ63B200-HJ63B400HJ3B125-HJ3B400HLD63B250-HLD63B600HL63B450-HL63B600HL3B450-HL3B600HMD63B500-HMD63B800HN3B500-HN3B800HND63B100-HND63B120HK3B100-HK3B120HPD63B120-HPD63B160HP3B120-HP3B160HRD63B160-HRD63B200HR3B160-HR3B2006MOLDED CASECIRCUIT BREAKERS Mechanically and electrically interchangeable. Electrically interchangeable only, refer to sales office forfurther details. Electrically interchangeable only if the system interruptingcapacity is less than or equal to:200 kA at 240V AC200 kA at 480V AC100 kA at 600V AC Electrically interchangeable only if the system interruptingcapacity is less than or equal to:200 kA at 240V AC150 kA at 480V AC100 kA at 600V AC Refer to local sales office for replacement information. Effective 1994 — The FD6 and FXD6 types have beenreplaced by FD6-A and FXD6-A type thermal / magneticcircuit breakers — mechanically and electricallyinterchangeable with the exception that FXD6-A and FD6-Ahave 22kA at 600V AC ratings versus 18kA at 600V AC fortypes FXD6 and FD6.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-155

Molded Case Circuit BreakersSuperseded BreakersGeneral6MOLDED CASECIRCUIT BREAKERSSentron Series Note Superseded Note SupersededJD62B200-JD62B400JD63B200-JD63B400JXD22B200-JXD22B400JXD22S400AJXD23B200-JXD23B400JXD23S400AJXD62B200-JXD62B400JXD62H400, JXD62L400JXD62S400AJXD63B200-JXD63B400JXD63H400, JXD63L400JXD63S400ALD62B250-LD62B500LD62B250-LD63B600LXD62B450-LXD62B600LXD62J600, LXD62L600LXD62S600ALXD63B450-LXD63B600LXD64H600, LXD63L600LXD63S600AMD62B500-MD62B800MD63B500-MD63B800MXD62A800, MXD62H800, MXD62L800MXD62S800AMXD63A800, MXD63H800, MXD63L800MXD63S800AND63B100-ND63B900NXD63S120APD63B120-PD63B160PXD63S160ARD63B160-RD63B200QJ22B060-QJ22B225QJ22B060H-QJ22B225HQJ22S225QJ23B060-QJ23B225QJ23B060H-QJ23B225HQJH22B060-QJH22B225QJH23B060-QJH23B225QJH23S225RD63B160-RD63B200RXD63S200ASHJD69200-SHJD69400SHJD69200G-SHJD69400GSHJD69200NGT-SHJD69400NGTSHJD69200NT-SHJD69400NTSHLD69300-SHLD69600SHLD69300G-SHLD69600GSHLD69300NGT-SHLD69600NGSHLD69300NT-SHLD69600NTSHND69100A-SHND69120ASHND69100AG-SHND69120AGSHPD69120-SHPD69160SHPD69120G-SHPD69160GJLB200-JL62B400JL63B200-JL63B400JD22B200-JD22B400JD22S400JD23B200-JD23B400JD23S400JJ62B200-JJ62B400JL62L400, JL62H400JJ62S400AJJ63B200-JJ63B400JL63A400, JL63H400, JL63L400JJ63S400ALL63B250-LL62B600LL63B250-LL63B600LJ62B450-LJ62B600LL2H600, LL2U600, LL2X600LJ62S600LJ63B450-LJ63B600LL63H600, LL63L600LJ63S600AKM2B500-KM2B800KM3B500-KM3B800KM2A800, KM2H800, KM2L800KM2S800KM3A600, KM3H800, KM3L800KM3S800KP3B100-KP3B900KP3S120HP3B120-HP3B160HP3S160HR3B160-HR3B200QJ2B125-QJ2B225QJS225QJ3B125-QJ3B225QJ2H125-QJ2B225QJ3H125-QJ3H225QJ3S225HR3B160-HR3B200HR3S200SHJ63B200-SHJ63B400GSHJ63B200G-SHJ63B400GSHJ63N200G-SHJ63N400GSHJ63N200-SHJ63N400SHL63B300-SHL63B600SHL63B300G-SHL63B600GSHL63N300G-SHL63N600GSHL63N300-SHL63N600SHND69100-SHND69800SHND69100G-SHND69800GSHPF3B120-SHPF3B160SHPF3B120G-SHPF3B160GJL2B070-JL2B400JL3B0L0-JL3B400JD2B250-JD2B400JD2S400JD3B250-JD3B400JD3S400JJ2B250-JJ2B400JL2L400-JL2H400JJ3B200-JJ3B400JL3H400, JL3L400, JL3A225LL2B450-LL2B600LL3B450-LL3B600LL3A450, LL3H600LL3S600SHKF3B100-SHKF3B800SHKF3B100G-SHKF3B800GMechanically and electrically interchangeable.Electrically interchangeable only, refer to sales office forfurther details. Electrically interchangeable only if the systeminterrupting capacity is less than or equal to:200 kA at 240V AC200 kA at 480V AC100 kA at 600V ACElectrically interchangeable only if the systeminterrupting capacity is less than or equal to:200 kA at 240V AC150 kA at 480V AC100 kA at 600V ACRefer to local sales office for replacement information.6-156Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersSuperseded BreakersGeneralSentron Series Note Superseded Note SupersededSHND69100NGT-SHND69800NGTSHND69100NT-SHND69800NTSHPF3B120-SHPF3B160SHPF3B120G-SHPF3B160GSHPF3N120-SHPF3N160SHPF3N120G-SHPF3N160GSJD69200-SJ369400SJD69200G-SJD69400GSJD69200NGT-SJD69400NGTSJD69200NT-SJD69400NTSLD69300-SLD69600SLD69300G-SLD69600GSLD69300NGT-SLD69600NGTSLD69300NT-SLD69600NTSMD69600A-SMD69800ASMD69600AG-SMD69800AGSMD69600ANGT-SMD69800ANGTSMD69600ANT-SMD69800ANTSND69800A-SND69120ASND69800AG-SND69120AGSND69800ANGT-SND69120ANGTSND69800ANT-SND69120ANTSPD69120-SPD69160SPD69120G-SPD69160GSPD69120NGT-SPD69160NGTSPD69120NT-SPD69160NT— —— —— —— —— —— —— —— —— —— —— —SHKF3N100G-SHKF3N800GSHKF3N100-SHKF3N800SHP3B120-SHP3B800SHP3B120G-SHP3B800GSHP3N120-SHP3N800SHP3N120G-SHP3N800GSJL63B200-SJL63B400SJL63B200G-SJL63B400GSJL63N200G-SJL63N400GSJL63N200-SJL63N400SLL63B300-SLL63B600SLL63B300G-SLL63B600GSLL63N300G-SLL63N600GSLL63N300-SLL63N600SMD69600-SMD69800SMD69600G-SMD69800GSMD69600NGT-SMD69800NGTSMD69600NT-SMD69800NTSND69100-SND69800SND69100G-SND69800GSND69100NGT-SND69800NGTSND69100NT-SND69800NTSHPF3B120-SHPF3B160SHPF3B120G-SHPF3B160GSHPF3N120-SHPF3N160GSHPF3N120G-SHPF3N160GBQCC1B015-BQC1B030CC1B015-CC1B030CC2B015-CC2B030CC3B015-CC3B030EF2A003, EF2H050, EF2L050, EF2A100,EF2H150, EF2L150EH1B015-EH1B100EH2B015-EH2B100EH3B015-EH3B100HE2A003, HE2H050, HE2L050-HE2A100HE3A003, HE3H050, HE3L050-HE3A100HE3B015-HE3B100SHK3N100G-SHK3N600GSHK3N100-SHK3N600SKMF3B600-SKMF3B800SKMF3B600G-SKMF3B800GSKMF3N600G-SKMF3N800GSKMF3N600-SKMF3N800SKPF3B100-SKPF3B600SKPF3B100G-SKPF3B600GSKPF3N100G-SKPF3N600GSKPF3N100-SKPF3N6006MOLDED CASECIRCUIT BREAKERSMechanically and electrically interchangeable.Electrically interchangeable only, refer to salesoffice for further details.These units are for replacement purposes only.Consult sales office for availability.These units are no longer manufactured, and noreplacement is available.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 6-157

NotesMOLDED CASECIRCUIT BREAKERS66-158Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

7SPEEDFAX TM 2007-2008 TransformersContentsFeatures and Technical Information 7-2Transformer—Dry Type Distribution 7-3 – 7-4Catalog Coding System 7-5Single Phase—Distribution Dry Type 7-6 – 7-7Three Phase—Distribution Dry Type 7-8 – 7-11Filtered Isolation and Motor Drive 7-12Sentron Power Centers 7-13NEMA TP1 – Energy Efficient & Super Energy Efficient Transformers 7-14Harmonic Mitigation Transformers 7-15 – 7-16Reduced Size Transformers 7-17Warehouse StockType QST [Standard Units] 7-18Buck-Boost TransformersType Q Buck-Boost Transformers and Accessories 7-19Buck-Boost Application, Selection Tables 7-20 – 7-23Single Phase, Three Phase Buck-Boost Connection Diagrams 7-247 TRANSFORMERSResidential Commercial Industrial

7TRANSFORMERSDistribution Dry Type Transformers600 Volts Class — Single and Three Phase Selection600 Volts ClassSingle Phase 0.25–167 KVAThree Phase 3–1000 KVAFeatures▪ Standard units are UL listed and aredesigned in accordance with ANSI,NEMA (ST20) and IEEE standardsEncapsulated▪ UL listed designs (UL 506)▪ Totally enclosed, non-ventilated,heavy gauge steel enclosure▪ Core and coil completely embeddedwithin a resin compound for quiet,low temperature operation▪ Encapsulation seals out moisture and air▪ UL listed indoor/outdoor enclosurefeatures integral wall mounting brackets▪ Rugged design resists weather, dust,and corrosion▪ Efficient, compact, lightweight, easyto install▪ Flexible wiring leads that terminatewithin the bottom wiring compartment▪ Large wiring compartment on thebottom with convenient knockouts▪ High quality non-aging electrical gradecore steel▪ Precision wound coilsVentilated▪ UL listed designs (UL 1561)▪ Designed for indoor NEMA 2 installations.NEMA 3R enclosures suitable for outdoorlocations available as an option▪ Core and coils are designed with ULlisted high-temperature materials ratedfor 220°C; standard units feature 150°Cwinding temperature rise▪ Optional low temperature rise of 115° Cor 80° C winding temperature rise forincreased efficiency and additionaloverload capability▪ Rugged sheet steel enclosure perUL1561, UL506 standards withremovable panels for access tothe internal wiring area▪ Neoprene noise dampening pads isolatethe core and coil from the enclosure▪ Optional drip shields/weathershieldand wall brackets available▪ High quality, non-aging electrical gradecore steel▪ Precision wound coils25KVA 277 -120/240 is 115°C rise. 25KVA 480 x 240-120/240 is 150°C rise. Average sound level applies to 150°C rise K-1 transformers.Average dB levels for low temperature and other K-Factorratings available upon request. NEMA Class for 80°C rise = B, 115°C rise = F, 150°C = H.Insulation class per UL 1446 180° = (H), 220° = (R)Encapsulated TransformerSingle Phase Transformer Ampere RatingsSingle Phase Full Load Amperes (FLC)KVA 120V 208V 240V 277V 480V 600V.25 2.0 1.2 1.0 0.9 0.5 0.4.50 4.2 2.4 2.1 1.8 1.0 0.8.75 6.3 3.6 3.1 2.7 1.6 1.31 8.3 4.8 4.2 3.6 2.1 1.71.5 12.5 7.2 6.2 5.4 3.1 2.52 16.7 9.6 8.3 7.2 4.2 3.33 25 14.4 12.5 10.8 6.2 55 41 24 20.8 18.0 10.4 8.37.5 62 36 31 27 15.6 12.510 83 48 41 36 20.8 16.715 125 72 62 54 31 2525 206 120 104 90 52 4137.5 312 180 156 135 76 6250 416 240 208 180 104 8375 625 340 312 270 156 125100 833 480 416 361 208 166167 1391 803 695 603 347 278Three Phase Transformer Ampere RatingsThree Phase Full Load Amperes (FLC)KVA 208V 240V 480V 600V3 8.3 7.2 3.6 2.96 16.6 14.4 7.2 5.89 25 21.6 10.8 8.615 41.7 36.1 18.0 14.430 83.4 72.3 36.1 28.945 124 108 54.2 43.475 208 180 90 72112.5 312 270 135 108150 416 360 180 144225 624 541 270 216300 832 721 360 288500 1387 1202 601 481750 2084 1806 903 7231000 2779 2408 1204 963Insulation Class and Temperature RiseKVAInsulationTemperatureTemperature1-Phase 3-Phase NEMA Class Class Rise0.25–25 3–15 F 180° C 115° C15–167 15–1000 H 220° C 150° CSound Level in Decibels — 600V ClassVentilated TransformerNEMANEMAKVA Average dB KVA Average dB0–9 40 301–500 6010–50 45 501–700 6251–150 50 701–1000 64151–300 557-2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

TransformersDry Type Distribution 600 Volt ClassSiemens dry type distribution transformersare rated 600 volt class and are availablein a wide variety of ratings to provideversatile electrical distribution for generalpurpose, lighting and power loads incommercial and industrial applications.Ratings are available from 0.25 through167 kVA single phase, and 3 through 1000kVA 3-phase. A variety of primary andsecondary voltage ratings are available tomatch the load requirements to thedistribution system. All units meetapplicable ANSI and NEMA standards.Standard designs are UL Listed.Dry type transformers are air cooled bynatural convection. They require nospecial vaults for installation, and canbe installed in locations convenient tothe load being served.Encapsulated designs are provided forratings from 0.25 kVA through 15 kVA,1-phase, and from 3 kVA through 15kVA 3-phase. These designs featureindoor/outdoor enclosures with integralwall mounting brackets, and 115°C rise,180°C insulation system.Encapsulated TransformerVentilated designs are provided for ratingsfrom 25 kVA through 167 kVA 1- phase,and from 15 kVA through 1000 kVA 3-phase. These feature indoor enclosures,150°C rise, and 220°C insulation system.Ventilated TransformerGeneralA wide variety of designs and optionalaccessories are available includingweather shields for outdoor NEMA 3Rprotection.K-Factor Rated for Non-Linear LoadsSiemens offers transformer designswhich meet K-Factor ratings. K-Factor isa ratio between the additional lossesdue to harmonics and the eddy losses at60Hz. It is used to specify transformersfor non-linear loads. Note that K-Factortransformers do not eliminate harmonicdistortion; they withstand the non-linearload condition without overheating.K-Factor Features Designed to ANSI and NEMAStandards UL K-Factor Listed per UL 1561 K-Factor Rating Designed to IEEEc57.110 Aluminum Wound Coils Core, Conductors designed forHarmonics and Eddy Currents 150°CRise, 220°C Insulation Electrostatic Shield to Attenuate LineTransients 200% Neutral Bar (2X Phase current) NEMA 1 EnclosureOptions Special K-Factor ratings Special voltage ratings NEMA 3R Enclosure 80° or 115°C temperature rise Low noise designs Copper windings Drip shields Wall mounting brackets (15–50 kVA)Encapsulated Features UL Listed Designs Totally Enclosed, Non-Ventilated Heavy Gauge Steel Enclosure Core and Coil Completely EmbeddedWithin a Resin Compound — quiet,low temperature operation Encapsulation — seals out moistureand air UL Listed Indoor/Outdoor Enclosure— features integral wall mountingbrackets Rugged Design Resists Weather,Dust, and Corrosion Efficient, Compact, Lightweight —easy to install Flexible Wiring Leads TerminateWithin Bottom Wiring Compartment Large Wiring Compartment onBottom with Convenient Knockouts High Quality Non-Aging ElectricalGrade Core Steel Precision Wound CoilsOptions Copper windings Electrostatic shield (3 kVA and larger)Ventilated Features UL Listed Designs Designed for Indoor Installation Core and Coils are Designed with ULListed High-Temperature Materials —rated for 220°C; standard units feature150°C winding temperature rise Rugged Sheet Steel Enclosure perULI561, UL506 standards withRemovable Panels for Access toInternal Wiring Area Neoprene Noise Dampening PadsIsolate the Core and Coil from theEnclosure High Quality, Non-Aging ElectricalGrade Core Steel Precision Wound CoilsOptions Low temperature rise of 115°C or80°C winding temperature rise forincreased efficiency and additionaloverload capability Outdoor enclosures Totally enclosed non-ventilateddesigns Copper windings Electrostatic shield Low noise designs K-factor rated designs Drip shields and wall brackets available7 TRANSFORMERSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 7-3

7TRANSFORMERSTransformersDry Type Distribution 600 Volt ClassK-Factor Rated For Non-Linear LoadsFurnish and install K-Factor rated dry typetransformers of the two winding type,self-cooled, with 60Hz ratings as indicatedon the electrical plans. Unless specifiedotherwise, provide standard NEMAtaps, standard impedance, and standardsound levels. Transformers shall beSiemens or approved equal.Transformers shall be designed, manufactured,and tested in accordance withANSI, NEMA and IEEE Standards andshall be UL Listed. The self-coded kVArating shall be suitable for 30°C average,40°C maximum ambient temperature.Non-Linear rated transformers shall besuitable for nonsinusoidal loads and harmonicdistortion as indicated in IEEEC57.110, and shall be designed with thefollowing K-Factor rating (choose one):K4 for 50% Non-Linear loadK13 for 100% Non-Linear loadK20 for 150% Non-Linear loadK30 for 200% Non-Linear loadNon-Linear rated transformers shall beUL Listed and shall bear the UL markingon the nameplate along with the specifiedK-Factor rating. Non-Linear ratedtransformers shall include the followingdesign features:a) Core designed to withstand voltagedistortion and high frequencyharmonic currents. Magnetic fluxdensity designed to reduce eddycurrents and prevent saturation oroverheating of the core.b) Primary and secondary coilsdesigned to minimize stray losses,skin effect losses, and excessiveheating from harmonic currents.Coils shall not exceed the specifiedwinding temperature rise, the correspondinghot spot temperaturerating, or the 220°C insulation ratingwhile carrying the specifiedNon-Linear load.c) Neutral bus sized for 200% ofrated current to withstand circulatingcurrents and triplen harmonics.d) An Electrostatic Shield betweenthe primary and secondary windingand grounded to a common pointwithin the transformer enclosure.When properly grounded, theshield shall provide noise isolationand attenuate common mode andtransverse mode noise transientsunder normal loading conditions.e) The design and materials usedshall enable the transformers tocomply with NEMA TP1 efficiencystandards.Transformers rated 15 kVA and largershall be a ventilated dry type with a ULListed 220°C insulation system. Unitsshall be designed to operate with arated maximum temperature rise of150°C (Provide optional 115°C or 80°Crise when specified).Construction shall consist of aluminumwindings and arranged to brace coil layersand provide maximum ventilation.(Provide optional copper windings whenspecified). Cores shall be constructed ofnon-aging electrical grade steel withhigh magnetic permeability and low losscharacteristics.Core laminations shall be tightly assembled.The complete core and coilassembly shall be impregnated withnon-hydroscopic thermo-setting varnishto provide a high dielectric, moistureresistant,and flame retardant seal.SpecificationsCore and coil assemblies shall be constructedto provide short circuit withstand capability as defined by ANSI andNEMA standards. The complete assemblyshall be installed on vibration dampeningpads to reduce noise and securelybolted to the enclosure base. A flexiblegrounding conductor shall be installedbetween the core and coil assemblyand the transformer enclosure.Enclosures shall be ventilated, heavygauge steel construction finished withlight gray paint. Front and rear coversshall be removable to provide access tothe terminal compartment. Terminalsshall be fully sized to carry the transformerfull load current and shall bearranged to accept required UL-Listedcable connectors. Units installed outdoorsshall have a UL-Listed type 3Routdoor enclosure, or shall be UL Listedwith optional weathershields installed.Standard voltage ratings shall be suppliedwith NEMA standard taps for thehigh voltage windings.Unless specified otherwise, averagesound levels (150°C rise) shall meet thefollowing ANSI/ NEMA standards:0 to 9 kVA 40 dB10 to 50 kVA 45 dB51 to 150 kVA 50 dB151 to 300 kVA 55 dB301 to 500 kVA 60 dB501 to 700 kVA 62 dB701 to 1000 kVA 64 dBEach transformer shall have a securelyattached nameplate providing completeelectrical ratings, wiring diagram, tapconnections, and catalog number, asapplicable.7-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Distribution Dry Type TransformersCatalog Number Coding System for TransformersSelection3 F 3 Y 150 R K13 F ES C LN3 Z4 TE TEE TP1 LZ HM1 S 30 TS7 TV TB SS SSN4X I3 P CC W VG DSBasic Rating InformationPhasePrimary VoltageSecondary VoltageTapskVAOptional ModificationsReduced Size Plus (RSP) ModelK-Factor (K4, K13, K20, K30)Low Temperature Rise: 130C = (G), 115C = (F), 80C = (B)Electrostatic Shield (ES)(ES2=dual, ES3=120dB attenuation on HM1 & 2)Copper Wound (C)Low Noise (LN3 = 3dB below, LN5, etc.)Seismic Zone 4 Rated (Z4)Totally Enclosed NEMA 3R (TE)Totally Enclosed Encapsulated N-3R (TEE)Energy Efficient (NEMA -TP1)Frequency 50/60HzHarmonic Mitigation (HM1=1 secondary/single output, HM2=2 secondaries/double output)Super Energy Efficient - Surpasses NEMA-TP1 (Available on TP1, HM1, HM2, “TP1S”, ”HM1S”, “HM2S”Phase Shift for HM1 select > (00) or (30) degreePhase Shift for HM2 select > (03) for 0 & 30 or (15) for 15 & 45 degree lagging, or (PN15) for 15 pos & 15 negThermal Switches (TS7=170C, TS8=180C or TS0=200C)(TS72=2 switches, TS76=6 switches @ 170C, etc.)TVSS - Filter Capacitors Secondary Side with Surge CompressionTerminal BlockStainless Steel Enclosure N-3R w/DS or N4X w/SSN4XEnclosure Types NEMA 4X (SSN4X), NEMA 12 (N12), NEMA 4 (N4)Special Impedance — I4 = 4% max, I3 = 3% max etc.Fungus ProofingCore and Coil Assembly with nameplate displayed on frame bracket (may be shipped in std. enclosure)Wall Mounting Brackets (W)Vent GuardDrip Shields (weathershields) to provide NEMA-3R (DS)Note 1: If the catalog number will not completely describe the product, it will be identified as SPC-_ _ _KVA-XFMR.Note 2: “QST” suffix on catalog numbers defines units available in the Siemens warehouse distribution system.Note 3: Suffix K4TP1 or K13TP1 will indicate K-Factor rating and TP1 rating at K1 loading.Phase1-Phase 13-Phase 3Primary240X120 A208 B240 C480X240 D277 E480 F600 GExportSecondary120/240 1240 2208Y/120 3120/208 3480Y/277 5380Y/219 6230Y/133 7110/220 8190/200/208/220x380400/416/440 Range H190/208/220/240x380416/440/480ExportRange XTAPSDescription Designation4–3% (2 FCAN, 2 FCBN) J2–3.5% (1 FCAN, 1 FCBN) K3–5% (1 FCAN, 2 FCBN) MNoneN2–5% FCBN R2–5% (1 FCAN, 1 FCBN) S4–2.5% (2 FCAN, 2 FCBN) T2–2.5% FCBN U4–2.5% FCBN X6–2.5% (2 FCAN, 4 FCBN) YKVACatalog Catalog Catalog CatalogKVA Code KVA Code KVA Code KVA Code0.25 205 5 005 30 030 150 1500.50 505 6 006 37.5 037 167 1670.75 705 7.5 007 45 045 225 2251 001 9 009 50 050 300 3001.5 105 10 010 75 075 500 5002 002 15 015 100 100 750 7503 003 25 025 112.5 112 1000 000 Available in 3-phase 3 to 15 KVA only. Taps are determined by transformer design and are not selectable on standardcatalog units. With continuous overloads these units will be operating as 150°C rise designs. ”XES” Suffix coding for shielded isolation with filters & surge suppression. Applies to HMT designs.OPTIONAL PRODUCT OFFERINGS1. For non-standard or non-cataloged voltages or non-catalogedprimary taps refer to sales office.2. Non-standard application, 50/60 Hz, special impedance,voltage, etc. — consult sales office.3. Wall mounting brackets and weathershields — available atno charge on all indicated units when requested at time ofinitial project order. Contact sales office for feasibility of wallbrackets on units with special temperature rise, low noise,or copper windings.4. Special temperature rise:— 115° C rise, can tolerate 15% continuous overload. (Suffix Code F)— 80° C rise, can tolerate 30% continuous overload. (Suffix Code B)5. Copper windings — Available on most designs. (Suffix Code C)6. Low Noise Suffix code LN3 (3dB below std.) available asindicated. For LN5, etc. contact sales office with requiredsound level.7. Totally Enclosed Non-Ventilated (TE) — see page 7-8.8. Auto transformers (A) — see page 7-11.9. Non-standard paint color — contact sales office.10. Electrostatic shield (full width copper foil) for added noiseattenuation and reduction of high frequency disturbances.(Suffix Code ES)11. Energy Efficient (NEMA TP1), Meets TP1-1996 Efficiency.12. Harmonic mitigating transformers—see page 7-15.13. Transformer and panel combinations—see page 7-13.14. Reduced Size Plus models—see page 7-17.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 7-57 TRANSFORMERS

Distribution Dry Type TransformersSingle PhaseSelectionCatalog List Temperature Mounting Drip Shield Enclosure OptionalKVA Number Price $ Taps Rise Insulation Type Required Style Modifications208 Volts Primary, 120/240 Volts Secondary1. 1B1N001 377.00 N 115° C 180° C Wall No Encapsulated 22. 1B1N002 629.00 N 115° C 180° C Wall No Encapsulated 23. 1B1N003 770.00 N 115° C 180° C Wall No Encapsulated 1b, 2, 35. 1B1N005 967.00 N 115° C 180° C Wall No Encapsulated 1b, 2, 37.5 1B1N007 1425.00 N 115° C 180° C Wall No Encapsulated 1b, 2, 3010. 1B1N010 1614.00 N 115° C 180° C Wall No Encapsulated 1b, 2, 3015. 1B1N015 1859.00 N 115° C 180° C Wall No Encapsulated 1b, 2, 3025. 1B1Y025TP1 5509.00 N 150° C 220° C Floor Yes Ventilated 1, 2, 3, 4, 5037.5 1B1Y037TP1 6502.00 N 150° C 220° C Floor Yes Ventilated 1, 2, 3, 4, 5050. 1B1Y050TP1 7597.00 N 150° C 220° C Floor Yes Ventilated 1, 2, 3, 4, 5075. 1B1Y075TP1 18495.00 N 150° C 220° C Floor Yes Ventilated 1, 2, 3, 50100. 1B1Y100TP1 20659.00 N 150° C 220° C Floor Yes Ventilated 1, 2, 3, 50167. 1B1Y167TP1 51057.00 N 150° C 220° C Floor Yes Ventilated 1, 2, 3, 51240 480 Volts Primary, 120/240 Volts Secondary.25 1D1N205 164.00 N 115° C 180° C Wall No Encapsulated None.50 1D1N505 255.00 N 115° C 180° C Wall No Encapsulated None.75 1D1N705 381.00 N 115° C 180° C Wall No Encapsulated None1.0 1D1N001 380.00 N 115° C 180° C Wall No Encapsulated 2, 1b1.5 1D1N105 552.00 N 115° C 180° C Wall No Encapsulated None2.0 1D1N002 631.00 N 115° C 180° C Wall No Encapsulated 2, 1b3.0 1D1N003 769.00 N 115° C 180° C Wall No Encapsulated 2, 1b5.0 1D1N005 968.00 N 115° C 180° C Wall No Encapsulated 2, 1b7.5 1D1N007 1405.00 N 115° C 180° C Wall No Encapsulated 2, 1b10.0 1D1N010 1603.00 N 115° C 180° C Wall No Encapsulated 2, 1b15 1D1N015 1868.00 N 115° C 180° C Wall No Encapsulated 2, 1b15 1D1Y015TP1 3562.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 525 1D1Y025TP1 5283.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 537.5 1D1Y037TP1 6720.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 550 1D1Y050TP1 7737.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 575 1D1Y075TP1 10254.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5100 1D1Y100TP1 21106.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5167 1D1Y167TP1 32804.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 57277 Volts Primary, 120/240 Volts Secondary3 1E1U003 755.00 U 115° C 180° C Wall No Encapsulated 1b, 2, 35 1E1U005 978.00 U 115° C 180° C Wall No Encapsulated 1b, 2, 37.5 1E1U007 1535.00 U 115° C 180° C Wall No Encapsulated 1b, 2, 310 1E1U010 1804.00 U 115° C 180° C Wall No Encapsulated 1b, 2, 315 1E1U015 5170.00 U 115° C 180° C Wall No Encapsulated 1b, 2, 325 1E1U025 5311.00 U 115° C 180° C Wall No Encapsulated 1b, 2, 31TRANSFORMERS480 Volts Primary, 120/240 Volts Secondary3 1F1R003 774.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 35 1F1R005 968.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 37.5 1F1R007 1415.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 310 1F1R010 1598.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 315 1F1R015 1868.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 325 1F1R025 4314.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 31Optional Modifications Table (Contact Sales office for List Price)Optional (commonly used)CatalogModificationsSuffix Code1a. 115° C Rise F1b. 80° C Rise B2. Electrostatic Shield ES3. Copper Windings C4. Wall Mounting Brackets1 W5. Drip Shields DSTapsDescriptionDesignation4–3% (2 FCAN, 2 FCBN) J2–3.5% (1 FCAN, 1 FCBN) K3–5% (1 FCAN, 2 FCBN) MNoneN2–5% FCBN R2–5% (1 FCAN, 1 FCBN) S4–2.5% (2 FCAN, 2 FCBN) T2–2.5% FCBN U4–2.5% FCBN X6–2.5% (2 FCAN, 4 FCBN) YActual taps may vary based on volts/turn ratio.Wall designations for units having standard features.For outdoor application. Ventilated transformersrequiring drip shields/weathershields are UL listedfor outdoor use. No charge when requested at time ofinitial project order.Encapsulated transformers are UL listed for indoor/outdoor use.No charge when requested at time of initial project order. Items marked floor and wall can be wall mounted withoptional wall bracket identified with “W” suffix oncatalog number.7-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule XFMR

Distribution Dry Type TransformersSingle PhaseSelectionCatalog List Temperature Mounting Drip Shield Enclosure OptionalKVA Number Price $ Taps Rise Insulation Type Required Style Modifications600 Volts Primary, 120/240 Volts Secondary3 1G1R003 780.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 35 1G1R005 1246.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 37.5 1G1R007 1759.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 310 1G1R010 1617.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 315 1G1R015 3665.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 325 1G1R025 5555.00 R, U 115° C 180° C Wall No Encapsulated 1b, 2, 325 1G1Y025TP1 9545.00 Y, U 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 537.5 1G1Y037TP1 12171.00 Y, U 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 550 1G1Y050TP1 14122.00 Y, U 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 575 1G1Y075TP1 20472.00 Y 150° C 220° C Floor Yes Ventilated 2, 3, 5100 1G1Y100TP1 25821.00 Y 150° C 220° C Floor Yes Ventilated 2, 3, 5167 1G1Y167TP1 51057.00 Y 150° C 220° C Floor Yes Ventilated 2, 3, 51See page 7-6 for footnotes & Overseas Model 190/200/208/220 x 380/400/416/440 Volts Primary, 120/240 Volts Secondary—1Ø, 50/60 Hz1 1H1N001 828.00 N 115° C 180° C Wall No Encapsulated 22 1H1N002 1211.00 N 115° C 180° C Wall No Encapsulated 23 1H1N003 1570.00 N 115° C 180° C Wall No Encapsulated 25 1H1N005 1976.00 N 115° C 180° C Wall No Encapsulated 27.5 1H1N007 2613.00 N 115° C 180° C Wall No Encapsulated 210 1H1N010 3138.00 N 115° C 180° C Wall No Encapsulated 215 1H1N015 4030.00 N 115° C 180° C Wall No Encapsulated 2, 325 1H1N025 6532.00 N 115° C 180° C Wall No Encapsulated 2, 337.5 1H1N037 7368.00 N 150° C 220° C Floor & Wall Yes Ventilated 2, 3, 550 1H1N050 8571.00 N 150° C 220° C Floor & Wall Yes Ventilated 2, 3, 575 1H1N075 10179.00 N 150° C 220° C Floor Yes Ventilated 2, 3, 5100 1H1N100 11550.00 N 150° C 220° C Floor Yes Ventilated 2, 3, 5Overseas Model 190/208/220/240 x 380/416/440/480 Volts Primary, 120/240 Volts Secondary—1Ø, 50/60 Hz1 1X1N001 828.00 N 115° C 180° C Wall No Encapsulated 22 1X1N002 1211.00 N 115° C 180° C Wall No Encapsulated 23 1X1N003 1570.00 N 115° C 180° C Wall No Encapsulated 25 1X1N005 1976.00 N 115° C 180° C Wall No Encapsulated 27.5 1X1N007 2613.00 N 115° C 180° C Wall No Encapsulated 210 1X1N010 3138.00 N 115° C 180° C Wall No Encapsulated 215 1X1N015 4030.00 N 115° C 180° C Wall No Encapsulated 2, 325 1X1N025 6532.00 N 115° C 180° C Wall No Encapsulated 2, 3Overseas Model 190/200/208/220 x 380/400/416/440 Volts Primary, 110/220 Volts Secondary—1Ø, 50/60 Hz1 1H8N001 828.00 N 115° C 180° C Wall No Encapsulated 22 1H8N002 1211.00 N 115° C 180° C Wall No Encapsulated 23 1H8N003 1570.00 N 115° C 180° C Wall No Encapsulated 25 1H8N005 1976.00 N 115° C 180° C Wall No Encapsulated 27.5 1H8N007 2613.00 N 115° C 180° C Wall No Encapsulated 2Notice: CE mark is included on sizes 1 through 25KVA on all overseas models.Optional Modifications Table (Contact Sales office for List Price)Optional (commonly used)CatalogModificationsSuffix Code1a. 115° C Rise F1b. 80° C Rise B2. Electrostatic Shield ES3. Copper Windings C4. Wall Mounting Brackets1 W5. Drip Shields DSTapsDescriptionDesignation4–3% (2 FCAN, 2 FCBN) J2–3.5% (1 FCAN, 1 FCBN) K3–5% (1 FCAN, 2 FCBN) MNoneN2–5% FCBN R2–5% (1 FCAN, 1 FCBN) S4–2.5% (2 FCAN, 2 FCBN) T2–2.5% FCBN U4–2.5% FCBN X6–2.5% (2 FCAN, 4 FCBN) Y7 TRANSFORMERSDiscount Schedule XFMRSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 7-7

Distribution Dry Type TransformersThree PhaseSelectionCatalog List Temperature Mounting Drip Shield Enclosure OptionalKVA Number Price $ Taps Rise Insulation Type Required Style Modifications480 Volts Δ Primary, 240 Volts Δ Secondary With 120 Volt Tap On B Phase 15 3F1Y015TP1 4204.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 530 3F1Y030TP1 6562.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 545 3F1Y045TP1 6648.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 575 3F1Y075TP1 9606.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5, 7112.5 3F1Y112TP1 13152.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5, 7150 3F1Y150TP1 15852.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5, 7225 3F1Y225TP1 22217.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5, 7300 3F1Y300TP1 29647.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5, 7500 3F1Y500TP1 59077.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5, 7750 3F1Y750TP1 93911.00 Y 150° C 220° C Floor Yes Ventilated 1a, 2, 3480 Volts Δ Primary, 240 Volts Δ Secondary3 3F2R003 2094.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 36 3F2R006 2774.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 39 3F2R009 3457.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 315 3F2R015 5035.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 3480 Volts Δ Primary, 208Y/120 Volts Secondary3 3F3R003 1807.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 36 3F3R006 1899.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 39 3F3R009 2735.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 315 3F3R015 2943.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 315 3F3Y015TP1 4246.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 5, 6, 730 3F3Y030TP1 5467.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 5, 6, 745 3F3Y045TP1 6494.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 5, 6, 775 3F3Y075TP1 9244.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 5, 6, 7112.5 3F3Y112TP1 11607.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5, 6, 7150 3F3Y150TP1 15472.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5, 6, 7225 3F3Y225TP1 19634.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5, 6, 7300 3F3Y300TP1 27092.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5, 6, 7500 3F3Y500TP1 41465.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5, 6, 7750 3F3Y750TP1 92836.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 71000 3F3S000TP1 91694.00 J, Y, K, S 150° C 220° C Floor Yes Ventilated NoneCatalog List Temperature Mounting Drip Shield Optional Avg. SoundKVA Number Price $ Taps Rise Insulation Type Required Modifications Level7TRANSFORMERSTotally Enclosed Transformers, Indoor/Outdoor Use 480 Volts Δ Primary, 208Y/120 Volts Secondary15 3F3Y015TE 7260.00 Y 150° C 220° C Floor No None 45dB30 3F3Y030TE 10382.00 Y 150° C 220° C Floor No None 45dB45 3F3Y045TE 12171.00 Y 150° C 220° C Floor No None 50dB75 3F3Y075TE 17130.00 Y 150° C 220° C Floor No None 50dB112.5 3F3Y112TE 12626.00 Y 150° C 220° C Floor No None 55dB150 3F3Y150TE 15862.00 Y 150° C 220° C Floor No None 55dB1480 Volts Δ Primary, 240 Volts Δ Secondary with 120V Lighting Tap on B Phase 15 3F1Y015TE 7260.00 Y 150° C 220° C Floor No None 45dB30 3F1Y030TE 10382.00 Y 150° C 220° C Floor No None 45dB45 3F1Y045TE 12171.00 Y 150° C 220° C Floor No None 50dB75 3F1Y075TE 16981.00 Y 150° C 220° C Floor No None 50dB112.5 3F1Y112TE 23718.00 Y 150° C 220° C Floor No None 55dB150 3F1Y150TE 30907.00 Y 150° C 220° C Floor No None 55dB1Optional Modifications Table (Contact Sales office for List Price)Optional (commonly used)CatalogModificationsSuffix Code1a. 115°C Rise F1b. 80°C Rise B2. Electrostatic Shield ES3. Copper Windings C4. Wall Mounting Brackets1 W5. Drip Shields DS6. Low noise — 3dB below std. LN37. Super Energy Efficient S 1TapsDescriptionDesignation4–3% (2 FCAN, 2 FCBN) J2–3.5% (1 FCAN, 1 FCBN) K3–5% (1 FCAN, 2 FCBN) MNoneN2–5% FCBN R2–5% (1 FCAN, 1 FCBN) S4–2.5% (2 FCAN, 2 FCBN) T2–2.5% FCBN U4–2.5% FCBN X6–2.5% (2 FCAN, 4 FCBN) YActual taps may vary based on volts/turn ratio.Wall designations for units having standard features.For outdoor application. Ventilated transformersrequiring drip shields are UL listed for outdoor use.Encapsulated transformers are UL listed for indoor/outdoor use (2.5% on each side of lighting tap).Reduced capacity 1-phase tap— When utilizing 1-phase7-8tap at 5%, the 3-phase load is reduced to 85% max. (5%reduction on 3 coils). 10% of rated KVA absolutemaximum (evenly balanced on each side of lightingtap). When utilizing 1-phase tap at 10%, the 3-phaseload is reduced to 70% max. (10% reduction on 3 coils).No charge when requested at time of initial project order.240 volt secondary (3F2) is available in 3-phase 3 to15KVA only.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog TE units will have inrush equal to 2 sizeslarger than rated KVA. Items marked floor and wall can be wall mountedwith optional wall bracket identified with “W” suffixon catalog number. Wall mounting for 150˚C rise aluminum only. TP1S “S” features are described on page 7-14.Discount Schedule XFMR

Distribution Dry Type TransformersThree PhaseSelectionCatalog List Temperature Mounting Drip Shield Enclosed OptionalKVA Number Price $ Taps Rise Insulation Type Required Type Modifications480 Volts Δ Primary, 480Y/277 Volts Secondary15 3F5R015 4660.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 315 3F5Y015TP1 3952.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 5, 730 3F5Y030TP1 33766.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 5, 745 3F5Y045TP1 8191.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 5, 775 3F5Y075TP1 12353.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5, 7112.5 3F5Y112TP1 17122.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5, 7150 3F5Y150TP1 15157.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5, 7225 3F5Y225TP1 30016.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5, 7300 3F5Y300TP1 43146.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5, 7500 3F5Y500TP1 78455.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5, 73-Phase 480 Δ — 208Y/120 K-4 (50% Non-Linear Load) 15 3F3Y015K4TP1 5480.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 4, 5, 630 3F3Y030K4TP1 5903.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 4, 5, 645 3F3Y045K4TP1 6945.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 4, 5, 675 3F3Y075K4TP1 10012.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5, 6112.5 3F3Y112K4TP1 13214.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5, 6150 3F3Y150K4TP1 17173.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5, 6225 3F3Y225K4TP1 23977.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5, 6300 3F3Y300K4TP1 32603.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5, 6500 3F3Y500K4TP1 81244.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5, 613-Phase 480 Δ — 208Y/120 K-13 (100% Non-Linear Load) 15 3F3Y015K13TP1 6181.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 4, 5, 6, 730 3F3Y030K13TP1 6659.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 4, 5, 6, 745 3F3Y045K13TP1 7766.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 4, 5, 6, 775 3F3Y075K13TP1 11103.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5, 6, 7112.5 3F3Y112K13TP1 14912.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5, 6, 7150 3F3Y150K13TP1 19380.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5, 6, 7225 3F3Y225K13TP1 27282.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5, 6, 7300 3F3Y300K13TP1 36776.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5, 6, 7500 3F3Y500K13TP1 96114.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5, 6, 73-Phase 480 Δ — 208Y/120 K-20 (125% Non-Linear Load) 15 3F3Y015K20TP1 6659.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 4, 530 3F3Y030K20TP1 9193.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 4, 545 3F3Y045K20TP1 10870.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 4, 575 3F3Y075K20TP1 15244.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5112.5 3F3Y112K20TP1 23304.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5150 3F3Y150K20TP1 25308.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5225 3F3Y225K20TP1 36122.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5300 3F3Y300K20TP1 53724.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5500 3F3Y500K20TP1 105122.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 513-Phase 480 Δ — 208Y/120 K-30 (150% Non-Linear Load) 15 3F3Y015K30TP1 CSO Y 150° C 220° C Floor Yes Ventilated 1, 3, 4, 530 3F3Y030K30TP1 8451.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 4, 545 3F3Y045K30TP1 11749.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 4, 575 3F3Y075K30TP1 CSO Y 150° C 220° C Floor Yes Ventilated 1, 3, 5112.5 3F3Y112K30TP1 28298.00 Y 150° C 220° C Floor Yes Ventilated 1, 3, 5150 3F3Y150K30TP1 CSO Y 150° C 220° C Floor Yes Ventilated 1, 3, 5225 3F3Y225K30TP1 CSO Y 150° C 220° C Floor Yes Ventilated 1, 3, 5300 3F3Y300K30TP1 CSO Y 150° C 220° C Floor Yes Ventilated 1, 3, 5500 3F3Y500K30TP1 CSO Y 150° C 220° C Floor Yes Ventilated 1, 3, 517 TRANSFORMERSOptional Modifications Table (Contact Sales office for List Price)Optional (commonly used)CatalogModificationsSuffix Code1a. 115°C Rise F1b. 80°C Rise B2. Electrostatic Shield ES3. Copper Windings C4. Wall Mounting Brackets1 W5. Drip Shields DS6. Low noise — 3dB below std. LN37. Super Energy Efficient S 1Actual taps may vary based on volts/turn ratio.Wall designations for units having standard features.For outdoor application. Ventilated transformersrequiring drip shields are UL listed for outdoor use.TapsEncapsulated transformers are UL listed for indoor/outdoor use. 9 & 15kva with R taps also available inventilated enclosures.K-Factor transformers equipped with electrostatic shieldand 200% neutral as standard features.DescriptionDesignation4–3% (2 FCAN, 2 FCBN) J2–3.5% (1 FCAN, 1 FCBN) K3–5% (1 FCAN, 2 FCBN) MNoneN2–5% FCBN R2–5% (1 FCAN, 1 FCBN) S4–2.5% (2 FCAN, 2 FCBN) T2–2.5% FCBN U4–2.5% FCBN X6–2.5% (2 FCAN, 4 FCBN) YNo charge when requested at time of initial project order. Items marked floor and wall can be wall mounted withoptional wall bracket identified with “W” suffix oncatalog number. TP1S features are described on page 7-14.Discount Schedule XFMRSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 7-9

7TRANSFORMERSDistribution Dry Type TransformersThree Phase7-10Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogSelectionCatalog List Temperature Mounting Drip Shield Enclosure OptionalKVA Number Price $ Taps Rise Insulation Type Required Style Modifications208 Volts Δ Primary, 208Y/120 Volts Secondary3 3B3R003 1923.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 36 3B3R006 3055.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 39 3B3R009 4166.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 315 3B3R015 5140.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 315 3B3Y015TP1 4038.00 Y, T 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 530 3B3Y030TP1 6953.00 Y, T 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 545 3B3Y045TP1 21463.00 Y, T 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 575 3B3Y075TP1 26602.00 Y, T 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5112.5 3B3Y112TP1 33138.00 Y, T 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5150 3B3Y150TP1 19676.00 Y, T, M 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5225 3B3S225TP1 32520.00 R, S 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5300 3B3S300TP1 46740.00 R, S 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5500 3B3S500TP1 84992.00 R, S 150° C 220° C Floor Yes Ventilated 1, 2, 3, 51208 Volt Δ Primary, 240 Δ Secondary with 120 Volt TAP on B Phase 15 3B1Y015TP1 4165.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 530 3B1Y030TP1 9585.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 545 3B1Y045TP1 12455.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 575 3B1Y075TP1 19323.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 5112.5 3B1Y112TP1 24112.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 4, 5150 3B1Y150TP1 28211.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 4, 5225 3B1Y225TP1 37520.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 4, 5208 Volts Δ Primary, 480Y/277 Volts Secondary9 3B5R009 4176.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 315 3B5R015 4934.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 330 3B5R030TP1 6983.00 R 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 545 3B5R045TP1 8201.00 R 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 575 3B5R075TP1 11559.00 R 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5112.5 3B5R112TP1 19146.00 R 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5150 3B5R150TP1 19088.00 R 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5225 3B5S225TP1 26527.00 S 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5300 3B5S300TP1 65844.00 S 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5500 3B5S500TP1 95283.00 S 150° C 220° C Floor Yes Ventilated 1, 2, 3, 51240 Volts Δ Primary, 208Y/120 Volts Secondary15 3C3Y015TP1 7780.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 530 3C3Y030TP1 13383.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 545 3C3Y045TP1 7871.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 575 3C3Y075TP1 11683.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5112.5 3C3Y112TP1 15676.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5150 3C3Y150TP1 17465.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5225 3C3S225TP1 32520.00 S 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5300 3C3S300TP1 46740.00 S 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5500 3C3S500TP1 56332.00 S 150° C 220° C Floor Yes Ventilated 1, 2, 3, 51240 Volts Δ Primary, 480Y/277 Volts Secondary15 3C5Y015TP1 7780.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 530 3C5Y030TP1 9585.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 545 3C5Y045TP1 12455.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 575 3C5Y075TP1 17138.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5112.5 3C5Y112TP1 21398.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5150 3C5Y150TP1 28211.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5225 3C5S225TP1 45801.00 S 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5300 3C5S300TP1 65844.00 S 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5500 3C5S500TP1 84992.00 S 150° C 220° C Floor Yes Ventilated 1, 2, 3, 51Optional Modifications Table (Contact Sales office for List Price)TapsOptional (commonly used) CatalogDescriptionDesignationModifications1a. 115° C Rise F1b. 80° C Rise B2. Electrostatic Shield ES3. Copper Windings C4. Wall Mounting Brackets1 W5. Drip Shields DS16. Low noise—3dB below std. LN31Actual taps may vary based on volts/turn ratio.Wall designations for units having standard features.For outdoor application. Ventilated transformersrequiring drip shields are UL listed for outdoor use.Encapsulated transformers are UL listed for indoor/outdoor use. 9 & 15kva with R taps also available inventilated enclosures.Suffix CodeNo charge when requested at time of initial projectorder. Items marked floor and wall can be wall mounted withoptional wall bracket identified with “W” suffix oncatalog number.4–3% (2 FCAN, 2 FCBN) J2–3.5% (1 FCAN, 1 FCBN) K3–5% (1 FCAN, 2 FCBN) MNoneN2–5% FCBN R2–5% (1 FCAN, 1 FCBN) S4–2.5% (2 FCAN, 2 FCBN) T2–2.5% FCBN U4–2.5% FCBN X6–2.5% (2 FCAN, 4 FCBN) Y Reduced capacity 1-phase tap— When utilizing 1-phasetap at 5%, the 3-phase load is reduced to 85% max. (5%reduction on 3 coils). 10% of rated KVA absolutemaximum (evenly balanced on each side of lightingtap). When utilizing 1-phase tap at 10%, the 3-phaseload is reduced to 70% max. (10% reduction on 3 coils).Discount Schedule XFMR

Distribution Dry Type TransformersThree PhaseSelectionCatalog List Temperature Mounting Drip Shield Enclosure OptionalKVA Number Price $ Taps Rise Insulation Type Required Style Modifications600 Volts Δ Primary, 208Y/120 Volts Secondary3 3G3R003 3476.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 36 3G3R006 2541.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 39 3G3R009 3137.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 315 3G3R015 4846.00 R 115° C 180° C Wall No Encapsulated 1b, 2, 315 3G3Y015TP1 6740.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 530 3G3Y030TP1 8309.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 545 3G3Y045TP1 10797.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 2, 3, 4, 575 3G3Y075TP1 14854.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5112.5 3G3Y112TP1 18545.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5150 3G3Y150TP1 24455.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5225 3G3Y225TP1 32520.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5300 3G3Y300TP1 46740.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5500 3G3Y500TP1 84992.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 51600 Volts Δ Primary, 480Y/277 Volts Secondary3 3G5R003 1819.00 R 115° C 180° C Wall No Encapsulated 26 3G5R006 3009.00 R 115° C 180° C Wall No Encapsulated 29 3G5R009 4684.00 R 115° C 180° C Wall No Encapsulated 215 3G5R015 8424.00 R 115° C 180° C Wall No Encapsulated 215 3G5Y015TP1 7780.00 Y 150° C 220° C Floor & Wall Yes Ventilated 2, 4, 530 3G5Y030TP1 9585.00 Y 150° C 220° C Floor & Wall Yes Ventilated 2, 4, 545 3G5Y045TP1 12455.00 Y 150° C 220° C Floor & Wall Yes Ventilated 2, 4, 575 3G5Y075TP1 17138.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5112.5 3G5Y112TP1 30128.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5150 3G5Y150TP1 28211.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5225 3G5Y225TP1 37520.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5300 3G5Y300TP1 52867.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 5500 3G5Y500TP1 98065.00 Y 150° C 220° C Floor Yes Ventilated 1, 2, 3, 51Dual Purpose Auto Transformers KVA600V Pri 480V Pri Catalog List Temperature Mounting Drip Shield Enclosure Optional480V Sec 380V Sec Number Price $ Taps Rise Insulation Type Required Style Modifications600 Volts Primary, 480 Volts Secondary 3Ø 60 Hz &— 480 Volts Primary 380 Volts Secondary 3Ø 50/60 Hz Alternate Rating15 12 3G4R015A 2008.00 R 115° C 180° C Wall No Encapsulated —30 24 3G4R030A 2549.00 R 115° C 180° C Wall No Encapsulated —45 36 3G4R045A 3816.00 R 115° C 180° C Wall No Encapsulated —75 60 3G4R075A 5552.00 R 115° C 180° C Floor & Wall No Encapsulated 4112.5 90 3G4R112A 6603.00 R 150° C 220° C Floor & Wall Yes Ventilated 4, 5150 120 3G4R150A 7655.00 R 150° C 220° C Floor & Wall Yes Ventilated 4, 5225 180 3G4R225A 9240.00 R 150° C 220° C Floor & Wall Yes Ventilated 4, 5300 240 3G4R300A 12020.00 R 150° C 220° C Floor & Wall Yes Ventilated 4, 5500 400 3G4R500A 16155.00 R 150° C 220° C Floor & Wall Yes Ventilated 51Optional Modifications Table (Contact Sales office for List Price)Optional (commonly used) CatalogModificationsSuffix Code1a. 115° C Rise F1b. 80° C Rise B2. Electrostatic Shield ES3. Copper Windings C4. Wall Mounting Brackets1 W5. Drip Shields DSTapsDescriptionDesignation4–3% (2 FCAN, 2 FCBN) J2–3.5% (1 FCAN, 1 FCBN) K3–5% (1 FCAN, 2 FCBN) MNoneN2–5% FCBN R2–5% (1 FCAN, 1 FCBN) S4–2.5% (2 FCAN, 2 FCBN) T2–2.5% FCBN U4–2.5% FCBN X6–2.5% (2 FCAN, 4 FCBN) Y7 TRANSFORMERSActual taps may vary based on volts/turn ratio.Wall designations for units having standard features.For outdoor application. Ventilated transformersrequiring drip shields are UL listed for outdoor use.Encapsulated transformers are UL listed for indoor/outdoor use.No charge when requested at time of initial project order. If used on unbalanced loads, these auto transformerswill need to be used on a 4-wire system with the supplyneutral connected to the transformer. If used on motorloads, then they may be used on a 3-wire system withouta neutral or fourth wire. Review in NEC 450-4 and 450-5. Items marked floor and wall can be wall mounted withoptional wall bracket identified with “W” suffix oncatalog number.Discount Schedule XFMRSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 7-11

7TRANSFORMERSDistribution Dry Type TransformersThree PhaseIsolation & FilteringTransformersThe Siemens “XES” models arespecifically designed to protect sensitiveequipment from surges, spikes and linenoise. These designs are available withMotor Drive IsolationThree Phase 60HZ Motor Drive Isolation TransformersSelectionCatalog List Temperature Mounting Drip Shield Enclosure OptionalKVA Number Price $ Taps Rise Insulation Type Required Style Modifications480 Volts Δ Primary, 208Y/120 Volts Secondary15 3F3Y015XESTP1 6504.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 3, 4, 530 3F3Y030XESTP1 9008.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 3, 4, 545 3F3Y045XESTP1 11000.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 3, 4, 575 3F3Y075XESTP1 16130.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 3, 5112.5 3F3Y112XESTP1 18000.00 Y 150° C 220° C Floor Yes Ventilated 1a, 3, 5208 Volts Δ Primary, 208Y/120 Volts Secondary15 3B3Y015XESTP1 6504.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 3, 4, 530 3B3Y030XESTP1 9008.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 3, 4, 545 3B3Y045XESTP1 11000.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 3, 4, 575 3B3Y075XESTP1 16130.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 3, 5112.5 3B3Y112XESTP1 18000.00 Y 150° C 220° C Floor Yes Ventilated 1a, 3, 5240 Volts Δ Primary, 208Y/120 Volts Secondaryeither 208 volt or 480 volt primary and280Y/120 volt secondary up to 225 kVA.All units have spike/surge protection onthe primary side and low pass filters onthe secondary. The combination of thesecomponents and the electrostaticShielded Isolation with Filter Capacitors and Surge Suppression (“XES” Models)shielding provide excellent transversemode noise attenuation of 60 db.Additionally the common mode noiseattenuation of 120 db will increaseprotection from line noise, spikesand surges.15 3C3Y015XESTP1 6504.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 3, 4, 530 3C3Y030XESTP1 9008.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 3, 4, 545 3C3Y045XESTP1 11000.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 3, 4, 575 3C3Y075XESTP1 16130.00 Y 150° C 220° C Floor & Wall Yes Ventilated 1, 3, 5112.5 3C3Y112XESTP1 18000.00 Y 150° C 220° C Floor Yes Ventilated 1a, 3, 5Taps (See page 7-11)Motor Catalog List Standard Temperature Mounting Drip ShieldKVA H.P. Number Price $ Taps Rise Insulation Type Required 7.5 3 & 5 DT ( ) 007 3045.00 2–5% FCAN/BN 115° C 180° C Floor & Wall Yes11 7.5 DT ( ) 011 5492.00 2–5% FCAN/BN 115° C 180° C Floor & Wall Yes15 10 DT ( ) 015 5008.00 2–5% FCAN/BN 150° C 220° C Floor & Wall Yes20 15 DT ( ) 020 5797.00 2–5% FCAN/BN 150° C 220° C Floor & Wall Yes27 20 DT ( ) 027 6902.00 2–5% FCAN/BN 150° C 220° C Floor & Wall Yes34 25 DT ( ) 034 7659.00 2–5% FCAN/BN 150° C 220° C Floor & Wall Yes40 30 DT ( ) 040 8073.00 2–5% FCAN/BN 150° C 220° C Floor & Wall Yes51 40 DT ( ) 051 9163.00 2–5% FCAN/BN 150° C 220° C Floor & Wall Yes63 50 DT ( ) 063 10650.00 2–5% FCAN/BN 150° C 220° C Floor Yes75 60 DT ( ) 075 12130.00 2–5% FCAN/BN 150° C 220° C Floor Yes93 75 DT ( ) 093 12366.00 2–5% FCAN/BN 150° C 220° C Floor Yes118 100 DT ( ) 118 13114.00 2–5% FCAN/BN 150° C 220° C Floor Yes145 125 DT ( ) 145 15537.00 2–5% FCAN/BN 150° C 220° C Floor Yes175 150 DT ( ) 175 18626.00 2–5% FCAN/BN 150° C 220° C Floor Yes220 200 DT ( ) 220 23366.00 2–5% FCAN/BN 150° C 220° C Floor Yes275 250 DT ( ) 275 CSO 2–5% FCAN/BN 150° C 220° C Floor Yes330 300 DT ( ) 330 CSO 2–5% FCAN/BN 150° C 220° C Floor Yes440 400 DT ( ) 440 CSO 2–5% FCAN/BN 150° C 220° C Floor Yes550 500 DT ( ) 550 CSO 2–5% FCAN/BN 150° C 220° C Floor Yes660 600 DT ( ) 660 CSO 6.2% FCAN/BN 150° C 220° C Floor Yes7-12DT ( ) Code Primary Volts Secondary Volts18 208 Delta 208Y/12020 208 Delta 230Y/13321 208 Delta 460Y/26622 230 Delta 230Y/13324 230 Delta 460Y/26630 380 Delta 460Y/26642 460 Delta 230Y/13344 460 Delta 460Y/26645 460 Delta 380Y/22052 575 Delta 230Y/13354 575 Delta 460Y/266Actual taps may vary based on volts/turn ratio. For outdoor application. Ventilated transformersrequiring drip shields are UL listed for outdoor use. Nocharge when requested at time of initial project order. Items marked floor and wall can be wall mounted withoptional wall bracket identified with “W” suffix oncatalog number. Refer selection and application guide for additionalinformation on horsepower, Ampere, KVA ratings andSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogMotor Drive IsolationCatalogOptional ModificationsSuffix Code1a. 115° C Rise F1b. 080° C Rise B2. Electrostatic Shield ES3. Copper Windings C4. Wall Mounting Brackets W5. Drip Shields/Weather Shields DS6. Thermal Switches TS(Contact Sales office for List Price)applications. Standard taps varies with design volts/turnratio. KVA sizes 225 through 660 are available in “RSP”designs as described on page 7-17.Discount Schedule XFMR

Distribution Dry Type TransformersSentron Power CentersEconomical Space Saving PackageSiemens Sentron Power Center is apre-wired combination of a primarybreaker disconnect, dry type shieldedtransformer, secondary breakerdisconnect and a secondary power panelall in one convenient package.You save time, space and money by nothaving to individually assemble, mountand wire these components. Simply addthe branch and you’re ready to go.UL-3R EnclosuresAll Sentron Power Center enclosures areUL-3R listed for indoor and outdoor use.Transformer AssemblySiemens totally encapsulated distributiontransformers are designed for generalpurpose indoor/outdoor operation.Sentron Power Centers can be installedin a wide variety of atmospheric andenvironmental conditions. A 180°C, ULrecognized insulation system is used.Sentron Power Center units areelectrostatically shielded to providetransient voltage protection at noextra cost. All units have 2-5% FCBNtaps.Panel AssemblyThe power panel assembly willaccommodate one-inch, 1, 2 or 3-pole,common trip, duplex secondary branchcircuit breakers, Type Q and QT as wellas ground fault circuit breakers. Per ULand NEC requirements, the SentronPower Center assembly comes fullyequipped with primary and secondarymain circuit breakers. Branch circuitbreakers can be obtained from our localdistributor once you have establishedyour branch circuit requirements. AllSentron Power Centers are UL listedfor service entrance.SelectionMaximum Secondary Circuits InteriorApproximate DimensionsCatalog List1" Wide 1/2" Wide 2" WideNumber(in inches)ApproximateKVA Number Price $ 120V (1-Pole) 120V (1-Pole) 240V (2-pole) Reference Height Width Depth Net Weight (lbs.)480 Volts Δ Primary, 240/120 Volts Secondary — Single Phase — Sentron Power Centers 5.0 1LPC005 4310.00 8 16 4 I1224L1100CU 32.13 13.25 7.63 1207.5 1LPC007 5082.00 8 16 4 I1224L1100CU 32.13 15.88 11.00 16010.0 1LPC010 5520.00 8 16 4 I1224L1100CU 34.38 15.88 11.00 18515.0 1LPC015 6667.00 12 24 6 I1224L1125CU 34.38 17.13 12.38 24025.0 1LPC025 8412.00 20 40 10 I2440L1200CU 41.88 17.88 13.50 330480 Volts Δ Primary, 208Y/120 Volts Secondary — Three Phase — Sentron Power Centers 9.0 3LPC009 8404.00 12 24 4 I1836L3200CU 33.75 22.13 7.63 25515.0 3LPC015 12140.00 12 24 4 I1836L3200CU 35.13 22.13 12.38 38522.5 3LPC022 13486.00 18 36 6 I2442L3200CU 38.25 30.25 13.38 53530.0 3LPC030 15310.00 24 42 8 I3042L3200CU 43.75 33.00 13.75 680Circuit Breaker Data for Sentron Power Centers480 Volts to 240/120 Volts — Single Phase480 Volts 240/120 Volts Maximum RatingPrimary Secondary of SecondaryKVA Breaker Main Breakers5.0 ED42B025L (25A) Q225 (25A) 20 Amps7.5 ED42B025L (25A) Q240 (40A) 30 Amps10.0 ED42B035L (35A) Q250 (50A) 40 Amps15.0 ED42B050L (50A) Q270 (70A) 60 Amps25.0 ED42B090L (90A) Q2125 (125A) 100 Amps480 Volts Δ to 280Y/120 Volts — Three Phase480 Volts 280Y/120 Volts Maximum RatingPrimary Secondary of SecondaryKVA Breaker Main Breakers9.0 ED43B025L (25A) Q330 (30A) 25 Amps15.0 ED43B040L (40A) Q350 (50A) 40 Amps22.5 ED43B070L (70A) Q370 (70A) 60 Amps30.0 ED43B090L (90A) Q3100 (100A) 80 Amps7 TRANSFORMERS Primary breaker has lineside lug for customerconnection. Single Phase – 18,000 Amps RMS SymmetricalInterrupting Capacity. Three Phase – 18,000 Amps RMS SymmetricalInterrupting Capacity. Sentron Power Centers are NEMA 3R for outdoorapplication and may be ordered with “SS” suffix for 304stainless steel enclosure. Secondary branch breakers are not included and mustbe ordered separately. Primary and secondary main breakers are included andare factory installed. ED frame breakers furnished are rated 18000 AIC and aresufficient for fault current of transformer. If higher AICrating is required by spec, the ED can be changed in thefield to HED 4 (22000 AIC) or HHED6 (65000 AIC). 1LPC005 and 3LPC009 are copper wound. Available with Stainless Steel NEMA 3R enclosures byadding catalog number suffix “SS”.Discount Schedule XFMRSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 7-13

TransformersNEMA TP1 Energy Efficiency StandardSingle Phase and Three PhaseTP1–Energy Efficient TransformersMost commercial and industrial facilitiesrequire several low-voltage transformersto decrease the voltage received fromthe utility to the voltages used by variousloads such as lighting, computers andother electrically operated equipment.Standard transformers convert approximately95% of the electricity receivedinto usable output voltage. Since thesetransformers are energized continually,even a small improvement in efficiencycan provide significant energy savings.These energy efficient transformers arespecifically designed to help save moneyon utility bills and reduce energy waste.Depending on the size of the transformer,a “NEMA TP1 compliant” transformer cansave $100-300 each year at an electricityrate of $0.075 cents per kWh. A typicallarge commercial facility will have 6-10 lowvoltage transformers, and thus can savebetween $600 and $3,000 per year.Basic Design CharacteristicsThe TP1 designs include the use of highergrade electrical steel and other featuresdesigned to lower flux density and reducelosses especially at average 35% loadingwhere the TP1 measurements apply.To meet TP1 the design engineer mustconsider both the “I square R” losses andthe core or iron loses. Simple de-ratingfrom a higher kVA will not satisfy the TP1standards as the efficiency level isdependent on the combination of core(no-load) losses and I2R (winding) losses.The core construction employs the use ofhigh quality non-aging electrical gradegrain-oriented silicon steel with highpermeability, low hysteresis and low eddycurrent losses. These characteristics arerequired to achieve the TP1 efficiencylevels. Core laminations must be tightlyassembled enabling magnetic fluxdensities to be kept well below thesaturation point.The core and coil designs must be lowloss type with minimum efficiencies perNEMA TP1 when operated at 35% offull load capacity. Efficiency shall betested in accordance with NEMA TP2(Standard test method for measuringthe energy consumption of distributiontransformers). The efficiency levels mustmeet the following minimums.SelectionTP1- Energy Efficient transformers:Single Phase Three PhasekVA Efficiency kVA Efficiency15 97.7% 15 97.0%25 98.0% 30 97.5%37.5 98.2% 45 97.7%50 98.3% 75 98.0%75 98.5% 112.5 98.2%100 98.6% 150 98.3%167 98.7% 225 98.5%250 98.8% 300 98.6%333 98.9% 500 98.7%750 98.8%7TRANSFORMERSNew Super Energy EfficientTransformers:TP1S, HM1S & HM2STP1S transformer designs surpass theNEMA TP1 standards for efficiency.These units are designed not to exceed115°C temperature rise above a 40°Cambient under full linear load and not toexceed 150°C rise under a non-linearload level of K13 (K20 for HMT units).Standard features of the TP1S, HM1S,HM2S units include:▪ Higher efficiency level with LinearLoad Efficiency: 25% less loss thanNEMA TP-1 from 35% to 65% load @75°C for sizes 15-750KVA▪ TP1S units are TP1 Rated efficiencyunder non-linear loads with a loadprofile of K13 at 50% loads @ 75°C▪ Noise levels are 3 dB lower thanNEMA ST-20▪ Standard 200% neutral▪ K13 rating on nameplate (K20 forHMT units)▪ Electrostatic shield▪ Ten year pro-rated warranty withstandard liability limitations same asSentron Harmonic Mitigation units7-14Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

TransformersSentron Harmonic Mitigating Transformers (HM1 & HM2)Descriptionthe 3 rd , 9 th and 15 th harmonic currentsare canceled as previously described,The Sentron Harmonic Mitigatingand additionally the 5Transformers (HMTs) are designed toth and 7 th harmoniccurrents are cancelled in the electricalmeet the needs of modern powersupply common to both transformersdistribution systems that contain a largedue to their relative 30° phase shift.percentage of non-linear equipment thatproduces harmonics. Some examples of If a single harmonic mitigatingthis type of equipment are computers, transformer (0°) is used in an existingprinters, fax machines, scanners, copiers, or new system utilizing standarduninterruptible power supplies, ballast delta-wye transformers (-30°), the 5 thand variable frequency drives (VFD).and 7 th harmonic currents originatingThis type of equipment generatesfrom the HMT transformer (0°) willharmonic voltages and currents because attempt to cancel the 5 th and 7 ththey contain AC to DC power conversion harmonic currents originating from therectifiers. Harmonic voltages andstandard delta-wye transformer (-30°).currents can cause a variety of problems This reduces the overall 5 th and 7 thranging from poor power factor, voltage harmonics present in the system, withdistortion, capacitor resonance and motor the actual reduction dependent on thefailures to overloaded transformers and magnitudes of the secondary loads.conductors.Double-Output Harmonic MitigatingThe Sentron HMTs are specially designed Transformer (0° and -30°, -15° and -45°,to operate under high non-linear load or +15°and -15° primary-secondaryconditions and have the additional benefit angular displacement)of improving the overall power system The primary of this transformer has areliability.delta connection and its secondary hasApplicationdouble-output, special double windingconnections with 30° phase shiftOne of the most effective ways tobetween outputs. This arrangementeliminate power system harmonics is tocancels the 3use a technique known as “phaserd , 5 th , 7 th , 9 th , and 15 thharmonics at very low impedanceshifting.” In this method power systemon the secondary side. This greatlyharmonics are eliminated by pairingimproves voltage distortion for thetogether harmonics that have 180°loads and the primary power factor.relative angular displacement, whichThe advantage of this arrangementcauses them to cancel one another out.is that the reductions of harmonicThis can be accomplished by a varietycurrents are achieved with oneof means:transformer creating a 12 pulse load.Single Output HarmonicIf two of these transformers are used,Mitigating Transformerwith the primaries of each phase(0° or -30° primary-secondaryshifted 15° with respect to oneangular displacement)another, then cancellation of harmonicsThe primary of this transformer has a up to the 19 th are achievable creatingdelta connection and its secondary has a 24 pulse load.a special double winding connection.BenefitsAlthough there is only one secondarythree phase output, the 3 rd , 9 th and 15 th Elimination of undesirable harmonics byharmonic currents are prevented from using the Siemens Sentron HMTs is ancirculating in the primary windings by effective solution to the power qualitycanceling their magnetic fluxes at low problems encountered by today’s powerimpedance with the double winding system professionals. By treating thesecondary, reducing voltage distortions harmonics at their source, usingto the loads.advanced technology, installationproblems can be avoided and overallWhen two transformers with thissystem reliability improved. The Sentrontype of connection, 0° and -30°HMT product line provides many fardisplacement, are used in parallel,Selectionreaching benefits such as loweroperating cost, improved operatingefficiency, reduced down-time due tooutages caused by nuisance tripping,and increased equipment life due tolow voltage distortions.Design and ConstructionFeaturesThe Sentron Harmonic MitigatingTransformers comply with all applicableANSI/IEEE standards includingC57.12.91, C57.96, C57.110, CSA #C22.2 No. 47 (CUL), UL506, UL1561 aswell as NEMA ST-20. The design life is25 years at 130 degree C rise, 30 yearsat 115C rise and 40 years for 80C risemodels. Approvals and listings includeUL, CSA. with CE approval availablewhen requested. The Sentron HMTshave capability up to the load capabilityup to K-20, which is achieved byharmonic cancellations in the secondaryand low flux density design forprotection against heat in place ofdesign enlargement protection only.Copper coil windings with full widthcopper foil electrostatic shield arestandard and additional shield optionsare available for higher noise attenuationrequirements. All HMTs have 130C risewith optional 115C and 80C winding risedesigns available. All designs includevacuum impregnated polyester resinencapsulation of windings and NEMA 3Renclosures. A neutral sized at 200% ofthe ampacity of the secondary phaseconductors for extra protection againsttriplens and unbalanced single phaseloads. The Sentron HMT designs haveTP1 energy efficient rating equal to thatof a non K-Factor rated transformer andhave the Energy Star emblem displayed.Siemens HMT designs have TP1 efficiencylevels at 35% load @ ref temp. 75degree C and also retain TP1 efficiencylevels at 65% load @ referencetemperature 85C. A ten-year pro-ratedwarranty with standard liabilitylimitations applies to all Sentron HMTs.7 TRANSFORMERSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 7-15

7TRANSFORMERSTransformersSentron Harmonic Mitigating Transformers (HM1 & HM2)Catalog Number Coding:Single output (1 secondary) = HM1,Double output (2 secondaries) = HM2.Phase Shift Options: HM1 followed by > (00) or (30) degree.HM2 > (03) for 0 & 30 or (15) for 15 & 45 degree lagging,or (PN15) =15 pos & 15 neg.HMT, 480 Volt Primary 120/208 Volt Secondary (3F3) - 130C(standard), 115C and 80C Winding Rise displayed on this page.SelectionHMTs are also available with 480 - 277/480 (3F5), 208–120/208(3B3), 208–277/480 (3B5).Standard Features Include:▪ K-13 Load profile rating.▪ TP1 Efficiencies @ 35% and 65% load.▪ (C) Copper windings.▪ (ES) Electrostatic shield.▪ 130 C Winding rise.130C (std.) Rise HMT List 115C Rise HMT List 80C Rise HMT List Secondary Configuration Enclosure Optional HMTKVA Catalog Number Price $ Catalog Number Price $ Catalog Number Price $ Outputs Phase Shift Style Modifications15 3F3Y015GHM100 3F3Y015FHM100 3F3Y015BHM100 1 Zero Degree Vented A,B,C,D,E,F,G,H15 3F3Y015GHM130 3F3Y015FHM130 3F3Y015BHM130 1 30 Deg Lagging Vented A,B,C,D,E,F,G,H15 3F3Y015GHM203 3F3Y015FHM203 3F3Y015BHM203 2 0 & 30 Lagging Vented A,B,C,D,E,F,G,H15 3F3Y015GHM215 3F3Y015FHM215 3F3Y015BHM215 2 15 & 45 Lagging Vented A,B,C,D,E,F,G,H15 3F3Y015GHM2PN15 3F3Y015FHM2PN15 3F3Y015BHM2PN15 2 15 Pos & 15 Neg Vented A,B,C,D,E,F,G,H30 3F3Y030GHM100 3F3Y030FHM100 3F3Y030BHM100 1 Zero Degree Vented A,B,C,D,E,F,G,H30 3F3Y030GHM130 3F3Y030FHM130 3F3Y030BHM130 1 30 Deg Lagging Vented A,B,C,D,E,F,G,H30 3F3Y030GHM203 3F3Y030FHM203 3F3Y030BHM203 2 0 & 30 Lagging Vented A,B,C,D,E,F,G,H30 3F3Y030GHM215 3F3Y030FHM215 3F3Y030BHM215 2 15 & 45 Lagging Vented A,B,C,D,E,F,G,H30 3F3Y030GHM2PN15 3F3Y030FHM2PN15 3F3Y030BHM2PN15 2 15 Pos & 15 Neg Vented A,B,C,D,E,F,G,H45 3F3Y045GHM100 3F3Y045FHM100 3F3Y045BHM100 1 Zero Degree Vented A,B,C,D,E,F,G,H45 3F3Y045GHM130 3F3Y045FHM130 3F3Y045BHM130 1 30 Deg Lagging Vented A,B,C,D,E,F,G,H45 3F3Y045GHM203 3F3Y045FHM203 3F3Y045BHM203 2 0 & 30 Lagging Vented A,B,C,D,E,F,G,H45 3F3Y045GHM215 3F3Y045FHM215 3F3Y045BHM215 2 15 & 45 Lagging Vented A,B,C,D,E,F,G,H45 3F3Y045GHM2PN15 3F3Y045FHM2PN15 3F3Y045BHM2PN15 2 15 Pos & 15 Neg Vented A,B,C,D,E,F,G,H75 3F3Y075GHM100 3F3Y075FHM100 3F3Y075BHM100 1 Zero Degree Vented A,B,C,D,E,F,G,H75 3F3Y075GHM130 3F3Y075FHM130 3F3Y075BHM130 1 30 Deg Lagging Vented A,B,C,D,E,F,G,H75 3F3Y075GHM203 3F3Y075FHM203 3F3Y075BHM203 2 0 & 30 Lagging Vented A,B,C,D,E,F,G,H75 3F3Y075GHM215 3F3Y075FHM215 3F3Y075BHM215 2 15 & 45 Lagging Vented A,B,C,D,E,F,G,H75 3F3Y075GHM2PN15 3F3Y075FHM2PN15 3F3Y075BHM2PN15 2 15 Pos & 15 Neg Vented A,B,C,D,E,F,G,H112.5 3F3Y112GHM100 3F3Y112FHM100 3F3Y112BHM100 1 Zero Degree Vented A,B,C,D,E,F,G,H112.5 3F3Y112GHM130 3F3Y112FHM130 3F3Y112BHM130 1 30 Deg Lagging Vented A,B,C,D,E,F,G,H112.5 3F3Y112GHM203 3F3Y112FHM203 3F3Y112BHM203 2 0 & 30 Lagging Vented A,B,C,D,E,F,G,H112.5 3F3Y112GHM215 3F3Y112FHM215 3F3Y112BHM215 2 15 & 45 Lagging Vented A,B,C,D,E,F,G,H112.5 3F3Y112GHM2PN15 3F3Y112FHM2PN15 3F3Y112BHM2PN15 2 15 Pos & 15 Neg Vented A,B,C,D,E,F,G,H150 3F3Y150GHM100 3F3Y150FHM100 3F3Y150BHM100 1 Zero Degree Vented A,B,C,D,E,F,G,H150 3F3Y150GHM130 3F3Y150FHM130 3F3Y150BHM130 1 30 Deg Lagging Vented A,B,C,D,E,F,G,H150 3F3Y150GHM203 3F3Y150FHM203 3F3Y150BHM203 2 0 & 30 Lagging Vented A,B,C,D,E,F,G,H150 3F3Y150GHM215 3F3Y150FHM215 3F3Y150BHM215 2 15 & 45 Lagging Vented A,B,C,D,E,F,G,H150 3F3Y150GHM2PN15 3F3Y150FHM2PN15 3F3Y150BHM2PN15 2 15 Pos & 15 Neg Vented A,B,C,D,E,F,G,H225 3F3Y225GHM100 3F3Y225FHM100 3F3Y225BHM100 1 Zero Degree Vented A,B,C,D,E,F,G,H225 3F3Y225GHM130 3F3Y225FHM130 3F3Y225BHM130 1 30 Deg Lagging Vented A,B,C,D,E,F,G,H225 3F3Y225GHM203 3F3Y225FHM203 3F3Y225BHM203 2 0 & 30 Lagging Vented A,B,C,D,E,F,G,H225 3F3Y225GHM215 3F3Y225FHM215 3F3Y225BHM215 2 15 & 45 Lagging Vented A,B,C,D,E,F,G,H225 3F3Y225GHM2PN15 3F3Y225FHM2PN15 3F3Y225BHM2PN15 2 15 Pos & 15 Neg Vented A,B,C,D,E,F,G,H300 3F3Y300GHM100 3F3Y300FHM100 3F3Y300BHM100 1 Zero Degree Vented A,B,C,D,E,F,G,H300 3F3Y300GHM130 3F3Y300FHM130 3F3Y300BHM130 1 30 Deg Lagging Vented A,B,C,D,E,F,G,H300 3F3Y300GHM203 3F3Y300FHM203 3F3Y300BHM203 2 0 & 30 Lagging Vented A,B,C,D,E,F,G,H300 3F3Y300GHM215 3F3Y300FHM215 3F3Y300BHM215 2 15 & 45 Lagging Vented A,B,C,D,E,F,G,H300 3F3Y300GHM2PN15 3F3Y300FHM2PN15 3F3Y300BHM2PN15 2 15 Pos & 15 Neg Vented A,B,C,D,E,F,G,H500 3F3Y500GHM100 3F3Y500FHM100 3F3Y500BHM100 1 Zero Degree Vented C,D,E,F,G,H500 3F3Y500GHM130 3F3Y500FHM130 3F3Y500BHM130 1 30 Deg Lagging Vented C,D,E,F,G,H500 3F3Y500GHM203 3F3Y500FHM203 3F3Y500BHM203 2 0 & 30 Lagging Vented C,D,E,F,G,H500 3F3Y500GHM215 3F3Y500FHM215 3F3Y500BHM215 2 15 & 45 Lagging Vented C,D,E,F,G,H500 3F3Y500GHM2PN15 3F3Y500FHM2PN15 3F3Y500BHM2PN15 2 15 Pos & 15 Neg Vented C,D,E,F,G,HAdderList PriceOptional Modifications Table for HMTs to Base $ Adder $Sound LevelThermal Sensors 170° C= (TS7), 185° C= (TS8) or 200° C= (TS0)A LN3= (3dB below NEMA standard) CSO H TS7 = 1 sensor center coil CSOB LN5= (5dB below NEMA standard) CSO H TS72 = 2 sensors center coil CSOAttenuation—Single shield—60dB Common Mode Std. H TS76 = 6 sensors, (2) on each coil CSOC ES2= Double shield—80dB Common Mode > CSO H TS8 = 1 sensor center coil CSOD ES3= Double shield & TVSS—120dB Common > CSO H TS82 = 2 sensors center coil CSOFiltering & Attenuation H TS86 = 6 sensors, (2) on each coil CSOE TV= Secondary side TVSS (90kA Standard)with common mode noise attenuation CSO H TS0 = 1 sensor center coil CSOF TB= Terminal Block CSO H TS02 = 2 sensors center coil CSOG S= Super Energy Efficient (HM1S & HM2S) CSO H TS06 = 6 sensors, (2) on each coil CSO Contact Sales Office for pricing.7-16Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Reduced Size TransformersThree PhaseSentron Reduced Size Plus(RSP)The “Sentron Reduced Size Plus” is idealfor locations with limited equipmentspace. This product is specificallydesigned for easier installation withsufficiently sized bus and all aroundaccess for cable entry from bottom,lower back or sides. The rodent proofgrillwork at the bottom slides up forinsertion of forks or pallet jack for easypositioning. The RSP has 3-phaseshunt-trip activated disconnect installedon the primary side and a safety alarmfeature which operates automatically ifthe coils overheat due to severe load orin case of failure as life expectancy isreached. The “RSP” is a dry typetransformer with fan assisted coolingactivated by thermal sensors only whenneeded for peak periods and heavyloading. The RSP system incorporatesdry contacts to indicate 3 differenttemperature levels for customersSelectionwishing to monitor the transformerremotely. Audible noise insulationbarriers are factory installed inside ofthe enclosure for quieter operation foraverage applications. The “SentronReduced Size Plus” is available withcopper or aluminum windings in 150C,115C or 80C rise as well as K-Factor,electrostatic shielding and TP1 efficiencyratings.Features:▪ Approximately 30% smaller and 40%lighter▪ Built to NEMA ST-20 standards, IEEEC57 and UL Listed▪ 3-phase disconnect switch factoryinstalled on primary. Protection fromoverheating with shunt trip device.▪ Easy connection to LV lug landing pads▪ Lugs provided on disconnect for HVconnections to disconnect▪ Cable entrance from lower back, sidesor bottom▪ Quiet operation for averageapplications; 2 dB below NEMA std.▪ Thermal switches activate (Fans)@125˚C, (Alarm) @190˚C and(Disconnect) @200˚C.▪ Greater efficiency than standard models▪ Dry contacts for remote monitoringconnections▪ Same distance to wall as standardunits▪ Front access for easy maintenance▪ Enclosure is rodent proof by design▪ Audible safety alarm to signaloverheating▪ NEMA 3R with weather shields added▪ Energy efficient NEMA-TP1 designs7 TRANSFORMERSSizes Available:150-1000 KVA.SMALLERLIGHTERQUIETERENERGY EFFICIENTSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 7-17

Warehouse Stock TransformersType QST [Standard Units]SelectionCatalog List Temperature Mounting Drip Shield EnclosureKVA Number Price $ Taps Rise Insulation Type Required Style Single Phase240 480 Volts Primary, 120/240 Volts Secondary.05 1D1N555QST 98.00 N 115° C 180° C Wall None Encapsulated.075 1D1N775QST 114.00 N 115° C 180° C Wall None Encapsulated.10 1D1N110QST 114.00 N 115° C 180° C Wall None Encapsulated.15 1D1N115QST 163.00 N 115° C 180° C Wall None Encapsulated.25 1D1N205QST 164.00 N 115° C 180° C Wall None Encapsulated.50 1D1N505QST 255.00 N 115° C 180° C Wall None Encapsulated.75 1D1N705QST 381.00 N 115° C 180° C Wall None Encapsulated1.0 1D1N001QST 380.00 N 115° C 180° C Wall None Encapsulated1.5 1D1N105QST 552.00 N 115° C 180° C Wall None Encapsulated2.0 1D1N002QST 631.00 N 115° C 180° C Wall None Encapsulated3.0 1D1N003QST 769.00 N 115° C 180° C Wall None Encapsulated5.0 1D1N005QST 968.00 N 115° C 180° C Wall None Encapsulated7.5 1D1N007QST 1405.00 N 115° C 180° C Wall None Encapsulated10 1D1N010QST 1603.00 N 115° C 180° C Wall None Encapsulated15 1D1N015QST 1868.00 N 115° C 180° C Wall None Encapsulated25 1D1Y025TP1QST 5283.00 Y 150° C 220° C Floor & Wall DSK11Q Ventilated37.5 1D1Y037TP1QST 6720.00 Y 150° C 220° C Floor & Wall DSK12Q Ventilated50 1D1Y050TP1QST 7737.00 Y 150° C 220° C Floor & Wall DSK12Q Ventilated75 1D1Y075TP1QST 10254.00 Y 150° C 220° C Floor & Wall DSK12Q Ventilated100 1D1Y100TP1QST 21106.00 Y 150° C 220° C Floor DSK15Q Ventilated167 1D1Y167TP1QST 32804.00 Y 150° C 220° C Floor DSK15Q VentilatedThree Phase480 Volts Δ Primary, 208Y/120 Volts Secondary3 3F3R003QST 1807.00 R 115° C 180° C Wall None Encapsulated6 3F3R006QST 1899.00 R 115° C 180° C Wall None Encapsulated9 3F3R009QST 2735.00 R 115° C 180° C Wall None Encapsulated15 3F3Y015TP1QST 4246.00 Y 150° C 220° C Floor & Wall DSK31Q Ventilated30 3F3Y030TP1QST 6468.00 Y 150° C 220° C Floor & Wall DSK11Q Ventilated45 3F3Y045TP1QST 6494.00 Y 150° C 220° C Floor & Wall DSK11Q Ventilated75 3F3Y075TP1QST 9244.00 Y 150° C 220° C Floor & Wall DSK12Q Ventilated112.5 3F3Y112TP1QST 11607.00 Y 150° C 220° C Floor DSK12Q Ventilated150 3F3Y150TP1QST 15472.00 Y 150° C 220° C Floor DSK34Q Ventilated225 3F3Y225RTP1QST 24774.00 Y 150° C 220° C Floor DSK15Q Ventilated300 3F3Y300RTP1QST 34349.00 Y 150° C 220° C Floor DSK36Q Ventilated500 3F3Y500RTP1QST 54933.00 Y 150° C 220° C Floor DSK37Q Ventilated7TRANSFORMERSThree Phase480 Volts Δ Primary, 240 Volts Δ Secondary With 120 Volt Tap On B Phase 15 3F1Y015TP1QST 4204.00 Y 150° C 220° C Floor & Wall DSK31Q Ventilated30 3F1Y030TP1QST 6562.00 Y 150° C 220° C Floor & Wall DSK11Q Ventilated45 3F1Y045TP1QST 6648.00 Y 150° C 220° C Floor & Wall DSK11Q Ventilated75 3F1Y075TP1QST 9606.00 Y 150° C 220° C Floor & Wall DSK12Q Ventilated112.5 3F1Y112TP1QST 13152.00 Y 150° C 220° C Floor DSK12Q Ventilated150 3F1Y150TP1QST 15852.00 Y 150° C 220° C Floor DSK34Q VentilatedTapsDescriptionDesignation4–3% (2 FCAN, 2 FCBN) J2–3.5% (1 FCAN, 1 FCBN) K3–5% (1 FCAN, 2 FCBN) MNoneN2–5% FCBN R2–5% (1 FCAN, 1 FCBN) S4–2.5% (2 FCAN, 2 FCBN) T2–2.5% FCBN U4–2.5% FCBN X6–2.5% (2 FCAN, 4 FCBN) Y Actual taps are shown for warehouse stock transformers. Wall designations for units having standard features. For outdoor application. Ventilated transformersrequiring drip shields are UL listed for outdoor use. Encapsulated transformers are UL listed for indoor/outdoor use.Reduced capacity 1-phase tap—5% of rated KVA(2.5% on each side of lighting tap).= Warehouse Stock7-18 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule XFMR

Warehouse Stock TransformersType QST and Buck-Boost TransformersEncapsulated, Indoor/Outdoor Enclosure, 115° C Rise120 240 Volts — 12/24 Volts,60 Hz, No Taps, Wall MountedCatalogListNumber KVA Price $050BB1224Q .050 241.00100BB1224Q .100 278.00150BB1224Q .150 334.00205BB1224Q .250 391.00505BB1224Q .500 539.00705BB1224Q .750 688.001BB1224Q 1.00 890.00105BB1224Q 1.50 1077.002BB1224Q 2.00 1318.003BB1224Q 3.00 1763.005BB1224Q 5.00 2525.00120 240 Volts — 16/32 Volts,60 Hz, No Taps, Wall MountedCatalogListNumber KVA Price $050BB1632Q .050 241.00100BB1632Q .100 278.00150BB1632Q .150 334.00205BB1632Q .250 391.00505BB1632Q .500 539.00705BB1632Q .750 688.001BB1632Q 1.00 890.00105BB1632Q 1.50 1077.002BB1632Q 2.00 1318.003BB1632Q 3.00 1763.005BB1632Q 5.00 2525.00Selection240 480 Volts — 24/48 Volts,60 Hz, No Taps, Wall MountedCatalogListNumber KVA Price $050BB2448Q .050 278.00100BB2448Q .100 334.00150BB2448Q .150 372.00205BB2448Q .250 447.00505BB2448Q .500 613.00705BB2448Q .750 780.001BB2448Q 1.00 983.00105BB2448Q 1.50 1188.002BB2448Q 2.00 1448.003BB2448Q 3.00 1763.005BB2448Q 5.00 3694.00AccessoriesDripshield/Weathershield Kits for Type QST Ventilated Transformers Single Phase Three Phase Single Phase Three Phase Single Phase Three PhaseCatalog 150˚C Rise & TP1 150˚C Rise & TP1 115˚C Rise & TP1 115˚C Rise & TP1 80˚C Rise & TP1 80˚C Rise & TP1 NameplateNumber KVA Sizes KVA Sizes KVA Sizes KVA Sizes KVA Sizes KVA Sizes Ref. #DSK11Q 25 30, 45 — 30 — 15, 30 4317G05DSK12Q 37.5, 50, 75 75, 112.5 25, 37.5, 50 45, 75 25, 37.5 45, 75 4317G06DSK34Q — 150 — 112.5 — — 4317G07DSK15Q 100, 167 225 75, 100 150 50, 75, 100 112.5, 150 4317G08DSK36Q — 300 — 225 — — 4317G09DSK37Q — 500 — 300 — — 4317G10DSK31Q — 15 — 15 — — 4317G11DSK38Q — 750, 1000 — 500, 750 — 500 4317G67Wall Mounting Brackets for Type QST Ventilated TransformersSingle Phase Three Phase Single Phase Three Phase Single Phase Three PhaseCatalog 150˚C Rise & TP1 150˚C Rise & TP1 115˚C Rise & TP1 115˚C Rise & TP1 80˚C Rise & TP1 80˚C Rise & TP1Number KVA Sizes KVA Sizes KVA Sizes KVA Sizes KVA Sizes KVA SizesWMB42Q 25 15, 30, 45 — 15, 30 — 15, 30WMB43Q 37.5, 50 75 25, 37.5 45 25 45Terminal Lug Kits For Ventilated TransformersCatalog Single Phase Three Phase ListTerminal Lug CableTerminal Lug CableHardware IncludedNumber KVA Sizes KVA Sizes Price $ Qty. Lug No. Range Qty. Lug No. Range Qty. Bolt SizeTLK31Q — 15 65.00 7 KA25U/TA0 14awg-1/0mcm n/a 7 1/4" x 1"TLK32Q — 30, 45 141.00 7 KA29U/TA250 6awg-250mcm n/a 7 5/16" x 1 1/2"TLK11Q 25, 37.5 — 127.00 8 KA29U/TA250 6awg-250mcm n/a 8 5/16" x 1 1/2"TLK13Q 75 — 279.00 12 KA29U/TA250 6awg-250mcm n/a 12 5/16" x 1 1/2"TLK33Q — 75 243.00 3 KA29U/TA250 6awg-250mcm 8 KA31U/TA350 6awg-350mcm 3, 8 (3) 5/16" x 1 1/2"(8) 3/8" x 1 1/2"TLK12Q 50 — 191.00 4 KA29U/TA250 6awg-250mcm 4 KA31U/TA350 6awg-350mcm 8 3/8" x 1 1/2"TLK34Q — 112.5 243.00 11 KA31U/TA350 6awg-350mcm n/a 11 3/8" x 1 1/2"TLK36Q — 225 459.00 22 KA31U/TA350 6awg-350mcm n/a 22 3/8" x 1 1/2"TLK35Q — 150 396.00 3 KA31U/TA350 6awg-350mcm 8 KA34U/TA500 4awg-500mcm 11 3/8" x 1 1/2"TLK37Q — 300 638.00 6 KA31U/TA350 6awg-350mcm 16 KA34U/TA500 4awg-500mcm 22 3/8" x 1 1/2"TLK15Q 167 — 562.00 8 KA31U/TA350 6awg-350mcm 12 KA34U/TA500 4awg-500mcm 20 3/8" x 1 1/2"TLK38Q — 500 1150.00 9 KA31U/TA350 6awg-350mcm 24 KA34U/TA500 4awg-500mcm 33 3/8" x 1 1/2"TLK14Q 100 — 279.00 12 KA31U/TA350 6awg-350mcm n/a 12 3/8" x 1 1/2"TLK39Q — 750 1430.00 12 KA31U/TA350 6awg-350mcm 28 KA34U/TA500 4awg-500mcm 40 3/8" x 1 1/2"7 TRANSFORMERS These accessories fit only warehouse stock transformerswith QST Catalog Suffix. UL Listed for indoor and outdoor use withdripshield installed. May be used on “QST” suffix units and “non QST”suffix transformers. Terminal lugs are screw type, lugconnectors suitable for both copper and aluminumcable. TA lugs are single barrel, AU lugs are doublebarrel. Each barrel is suitable for cable range shown.Lugs are rated 90° C Lug kit contains quantity required for each transformer.Discount Schedule XFMR Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 7-19

7TRANSFORMERSWarehouse Stock TransformersWarehouse StockApplicationThe Buck-Boost Transformer has four separatewindings, two-windings in the primaryand two-windings in the secondary. The unitis designed for use as an insulating transformeror as an autotransformer. As an autotransformerthe unit can be connected toBuck (decrease) or Boost (increase) a supplyvoltage. When connected in either the Buckor Boost mode, the unit is no longer aninsulating transformer but is an autotransformer.Units are designed for 60Hz applications.Autotransformers are more economicaland physically smaller than equivalent twowindingtransformers and are designed tocarry the same function as two-windingtransformers, with the exception of isolatingtwo circuits. Since autotransformers maytransmit line disturbances directly, they maybe prohibited in some areas by local buildingcodes. Before applying them, care shouldbe taken to assure that they are acceptableaccording to local code.NOTE: Autotransformers are not used inclosed delta connections as they introduceinto the circuit a phase shift which makesthem uneconomical.As insulating transformers these units canaccommodate a high voltage of 120, 240or 480 volts. For units with two 12 voltsecondaries, two 16 volt secondaries, ortwo 24 volt secondaries, the output can bewired for either secondary voltage, or for3-wire secondary. The unit is rated (KVA) asany conventional transformer.OperationElectrical and electronic equipment isdesigned to operate on a standard supplyvoltage. When the supply voltage is constantlytoo high or too low, (usually greaterthan ± 5%), the equipment fails to operateat maximum efficiency. A Buck-Boosttransformer is a simple and economicalmeans of correcting this off-standardvoltage up to ± 20%. A Buck-Boosttransformer will NOT, however, stabilizea fluctuating voltage. Buck-Boosttransformers are suitable for use in a threephase autotransformer bank in eitherdirection to supply 3-wire loads. They arealso suitable for use in a three phaseautotransformer bank which provides aneutral return for unbalanced current. Theyare NOT suitable for use in a three phaseautotransformer bank to supply a 4-wireunbalanced load when the source is a3-wire circuit.ConstructionBuck-Boost Transformers are containedwithin a NEMA 3R, non-ventilated weatherproofenclosure. Wiring compartmentsare located at the bottom. Core and coilassemblies are encapsulated. Insulationsystem temperature is 180˚ C and thewinding temperature rise is 115˚ C. Coilsare copper wound through 3 kva.How To Select The ProperTransformerTo select the proper Transformer for Buck-Boost applications, determine:1. Input line voltage — The voltage that youwant to buck (decrease) or boost(increase). This can be found bymeasuring the supply line voltage with avoltmeter.2. Load voltage — The voltage at whichyour equipment is designed to operate.This is listed on the nameplate of the loadequipment.3. Load KVA or Load Amps — You do notneed to know both — one or the other issufficient for selection purposes. Thisinformation usually can be found on thenameplate of the equipment that youwant to operate.Selection4. Number of phases — Single or threephase line and load should matchbecause a transformer is not capable ofconverting single to three phase. It ishowever a common application to makea single phase transformer connectionfrom a three phase supply by use of oneleg of the three phase supply circuit. Caremust always be taken not to overload theleg of the three phase supply. This is particularlytrue in a Buck-Boost applicationbecause the supply must provide for theload KVA, not just the nameplate rating ofthe Buck-Boost transformer.5. Frequency — The supply line frequencymust be the same as the frequency ofthe equipment to be operated — either50 or 60 cycles.How To Use Selection Charts1. Choose the selection table with thecorrect number of phases for single orthree phase applications.2. Line/Load voltage combinations are listedacross the top of the selection table.Select a line/load voltage combinationwhich comes closest to matching yourapplications.3. Follow the selected column down untilyou find either the KVA or load amps ofyour application. If you do not find theexact value, go on the next highestrating.4. Now follow across the table to the farleft-hand side to find the catalog numberand the KVA of the transformer you need.5. Follow the column of your line/load voltageto the bottom to find the connectiondiagram for this application.NOTE: Connection diagrams show lowvoltage and high voltage connection terminals.Either can be input or outputdepending on Buck or Boost application.6. In the case of three phase loads eitherwo or three single phase transformersare required as indicated in the “quantityrequired” line at the bottom of the table.The selection is dependent on whether aWye connected bank of three transformerswith a neutral is required or whetheran open Delta connected bank of tworansformers for a Delta connected loadwill be suitable.7. For line/load voltage not listed on theselection tables, use the pair listed on thetable that is slightly above your applicationfor reference. Then apply the firstformula at the bottom of the table todetermine “new” output voltage. Thenew KVA rating can be found using thesecond formula.7-20Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Warehouse Stock TransformersBuck-BoostSelection120 240 Volts Primary — 12/24 Volts Secondary, 60 Hz, No Taps, Wall MountedSingle Phase — Table 1 Boosting BuckingCatalog Line VoltageNumber (Available)96 100 105 109 189 208 215 220 125 132 229 245 250 252InsulatingLoad VoltageTransformer(Output)Rating115 120 115 120 208 229 237 242 114 120 208 222 227 240050BB1224Q KVA .24 .25 .50 .50 .43 .48 .49 .50 .52 .55 .48 .51 .52 1.05.050 KVA Load Amps 2.08 2.08 4.17 4.17 2.08 2.08 2.08 2.08 4.59 4.59 2.29 2.29 2.29 4.38100BB1224Q KVA .48 .50 .96 1.00 .87 .95 .99 1.01 1.04 1.10 .95 1.02 1.04 2.10.100 KVA Load Amps 4.17 4.17 8.33 8.33 4.17 4.17 4.17 4.17 9.16 9.16 4.58 4.58 4.58 8.75150BB1224Q KVA .72 .75 1.44 1.50 1.30 1.43 1.48 1.51 1.55 1.65 1.43 1.53 1.56 3.15.150 KVA Load Amps 6.25 6.25 12.50 12.50 6.25 6.25 6.25 6.25 13.75 13.75 6.88 6.88 6.88 13.13205BB1224Q KVA 1.19 1.25 2.40 2.50 2.17 2.38 2.47 2.52 2.60 2.75 2.38 2.54 2.60 5.25.250 KVA Load Amps 10.42 10.42 20.83 20.83 10.42 10.42 10.42 10.42 22.92 22.92 11.46 11.46 11.46 21.88505BB1224Q KVA 2.37 2.50 4.80 5.00 4.33 4.77 4.94 5.04 5.18 5.50 4.77 5.09 5.20 10.50.500 KVA Load Amps 20.83 20.83 41.67 41.67 20.83 20.83 20.83 20.83 45.83 45.83 22.92 22.92 22.92 43.75705BB1224Q KVA 3.56 3.75 7.19 7.50 6.50 7.15 7.41 7.56 7.77 8.25 7.15 7.63 7.80 15.75.750 KVA Load Amps 31.25 31.25 62.50 62.50 31.25 31.25 31.25 31.25 68.75 68.75 34.38 34.38 34.38 65.631BB1224Q KVA 4.75 5.00 9.58 10.00 8.67 9.53 9.88 10.08 10.36 11.00 9.53 10.17 10.40 21.001.00 KVA Load Amps 41.67 41.67 83.33 83.33 41.67 41.67 41.67 41.67 91.66 91.66 45.83 45.83 45.83 87.50105BB1224Q KVA 7.13 7.50 14.38 15.00 13.00 14.30 14.81 15.13 15.54 16.50 14.30 15.26 15.61 31.501.50 KVA Load Amps 62.50 62.50 125.00 125.00 62.50 62.50 62.50 62.50 137.50 137.50 68.75 68.75 68.75 131.252BB1224Q KVA 9.50 10.00 19.17 20.00 17.33 19.07 19.75 20.17 20.72 22.00 19.07 20.35 20.81 42.002.00 KVA Load Amps 83.33 83.33 166.66 166.66 83.33 83.33 83.33 83.33 183.33 183.33 91.66 91.66 91.66 175.003BB1224Q KVA 14.25 15.00 28.75 30.00 26.00 28.60 29.63 30.25 31.08 33.00 28.60 30.53 31.21 63.003.00 KVA Load Amps 125.00 125.00 250.00 250.00 125.00 125.00 125.00 125.00 275.00 275.00 137.50 137.50 137.50 262.505BB1224Q KVA 23.75 25.00 47.92 50.00 43.33 47.67 49.37 50.42 51.79 55.00 47.67 50.88 52.02 105.005.00 KVA Load Amps 208.33 208.33 416.66 416.66 208.33 208.33 208.33 208.33 458.33 458.33 229.17 229.17 229.17 437.50Connection Diagram (pg. 7-24) B B B A A D D D D A A D D CThree Phase — Table 2 Boosting BuckingCatalog Line Voltage 189Y/ 195Y/ 200Y/ 208Y/ 416Y/ 416Y/Number (Available) 109 113 115 120 240 240189 208 220 218 229 250 255 264InsulatingLoad Voltage 208Y/ 234Y/ 240Y/ 229Y/ 458Y/ 437Y/Transformer(Output) 120 135 139 132 264 252Rating208 229 242 208 208 227 232 240050BB1224Q KVA 1.50 .84 .86 1.65 1.65 3.15 .75 .83 .87 1.58 .83 .90 .92 .95.050 KVA Load Amps 4.17 2.08 2.08 4.17 2.08 4.17 2.08 2.08 2.08 4.39 2.29 2.29 2.29 2.29100BB1224Q KVA 3.00 1.69 1.73 3.30 3.30 6.29 1.50 1.65 1.75 3.15 1.65 1.80 1.84 1.90.100 KVA Load Amps 8.33 4.17 4.17 8.33 4.17 8.33 4.17 4.17 4.17 8.75 4.58 4.58 4.58 4.58150BB1224Q KVA 4.50 2.54 2.60 4.96 4.96 9.44 2.26 2.48 2.62 4.73 2.48 2.71 2.76 2.86.150 KVA Load Amps 12.50 6.25 6.25 12.50 6.25 12.50 6.25 6.25 6.25 13.13 6.88 6.88 6.88 6.88205BB1224Q KVA 7.50 4.22 4.33 8.30 8.25 15.75 3.75 4.13 4.37 7.88 4.13 4.50 4.61 4.76.250 KVA Load Amps 20.83 10.42 10.42 20.83 10.42 20.83 10.42 10.42 10.42 21.88 11.46 11.46 11.46 11.46505BB1224Q KVA 15.01 8.44 8.66 16.60 16.50 31.50 7.50 8.26 8.73 15.76 8.26 9.01 9.21 9.53.500 KVA Load Amps 41.67 20.83 20.83 41.67 20.83 41.67 20.83 20.83 20.83 43.75 22.92 22.92 22.92 22.92705BB1224Q KVA 22.52 12.67 12.99 24.90 24.75 47.25 11.26 12.39 13.10 23.64 12.39 13.52 13.82 14.29.750 KVA Load Amps 62.50 31.25 31.25 62.50 31.25 62.50 31.25 31.25 31.25 65.63 34.38 34.38 34.38 34.381BB1224Q KVA 30.02 16.89 17.32 33.20 33.00 63.00 15.01 16.51 17.47 31.52 16.51 18.02 18.42 19.051.00 KVA Load Amps 83.33 41.67 41.67 83.33 41.67 83.33 41.67 41.67 41.67 87.50 45.83 45.83 45.83 45.53105BB1224Q KVA 45.03 25.33 25.98 49.80 49.50 94.50 22.52 24.77 26.20 47.28 24.77 27.03 27.63 28.531.50 KVA Load Amps 125.00 62.50 62.50 125.00 62.50 125.00 62.50 62.50 62.50 131.25 68.75 68.75 68.75 68.752BB1224Q KVA 60.06 33.77 34.64 66.40 66.00 126.00 30.02 33.03 34.93 63.05 33.03 36.04 36.84 38.112.00 KVA Load Amps 166.67 83.33 83.33 166.67 83.33 166.66 83.33 83.33 83.33 175.00 91.67 91.67 91.67 91.673BB1224Q KVA 90.07 50.66 51.96 99.59 99.00 189.00 45.03 49.54 52.39 94.57 49.54 54.06 55.25 57.163.00 KVA Load Amps 250.00 125.00 125.00 250.00 125.00 250.00 125.00 125.00 125.00 262.50 137.50 137.50 137.50 137.505BB1224Q KVA 150.11 84.44 86.60 165.99 165.00 318.00 75.05 82.56 87.32 157.62 82.56 90.10 92.09 95.265.00 KVA Load Amps 416.67 208.33 208.33 416.67 208.33 416.66 208.33 208.33 208.33 437.50 229.17 229.17 229.17 229.17Quantity Required 3 3 3 3 3 3 2 2 2 2 2 2 2 2Connection Diagram (pg. 7-24) F E E F J K G G G H G G G G7 TRANSFORMERS• Output voltage for lower input voltage can be found by:Rated Output Voltage Input Actual Voltage = Output New Voltage.Rated Input Voltage• Output KVA available at reduced input voltage can be found by:Actual Input Voltage Output KVA = New KVA Rating.Rated Input Voltage= Warehouse Stock• Inputs and outputs may be reversedwithout affecting KVA capacity. Seenote on page 7-24Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 7-21

Warehouse Stock TransformersBuck-Boost120 240 Volts Primary — 16/32 Volts Secondary, 60 Hz, No Taps, Wall MountedSelectionSingle Phase — Table 3 Boosting BuckingCatalog Line VoltageNumber (Available)95 100 105 208 215 215 220 225 135 240 240 245 250 255InsulatingLoad VoltageTransformer(Output)Rating120 113 119 236 244 229 235 240 120 212 225 230 234 239050BB1632Q KVA .19 .36 .37 .37 .38 .72 .73 .73 .42 .37 .75 .77 .78 .80.050 KVA Load Amps 1.56 3.12 3.12 1.56 1.56 3.12 3.12 3.12 3.54 1.77 3.33 3.33 3.33 3.33100BB1632Q KVA .38 .72 .74 .74 .76 1.44 1.46 1.50 .84 .74 1.50 1.54 1.56 1.60.100 KVA Load Amps 3.13 6.25 6.25 3.13 3.13 6.25 6.25 6.25 7.09 3.54 6.66 6.66 6.66 6.66150BB1632Q KVA .56 1.06 1.12 1.12 1.14 2.16 2.20 2.26 1.26 1.10 2.26 2.30 2.34 2.40.150 KVA Load Amps 4.69 9.38 9.38 4.69 4.69 9.38 9.38 9.38 10.64 5.30 10.02 10.02 10.02 10.02205BB1632Q KVA .94 1.78 1.86 1.88 1.91 3.59 3.67 3.75 2.11 1.84 3.75 3.83 3.90 3.98.250 KVA Load Amps 7.81 15.63 15.63 7.81 7.81 15.63 15.63 15.63 17.71 8.85 16.67 16.67 16.67 16.67505BB1632Q KVA 1.88 3.56 3.72 3.75 3.81 7.19 7.34 7.50 4.21 3.68 7.50 7.67 7.80 7.97.500 KVA Load Amps 15.63 31.25 31.25 15.63 15.63 31.25 31.25 31.25 35.42 17.71 33.33 33.33 33.33 33.33705BB1632Q KVA 2.81 5.34 5.58 5.63 5.72 10.78 11.02 11.25 6.32 5.53 11.25 11.50 11.70 11.95.750 KVA Load Amps 23.44 46.88 46.88 23.44 23.44 46.88 46.88 46.88 53.13 26.56 50.00 50.00 50.00 50.001BB1632Q KVA 3.75 7.13 7.44 7.50 7.63 14.38 14.69 15.00 8.43 7.37 15.00 15.33 15.60 15.931.00 KVA Load Amps 31.25 62.50 62.50 31.25 31.25 62.50 62.50 62.50 70.83 35.42 66.67 66.67 66.67 66.67105BB1632Q KVA 5.63 10.69 11.16 11.25 11.44 21.56 22.03 22.50 12.64 11.05 22.50 23.00 23.40 23.901.50 KVA Load Amps 43.90 93.80 93.80 46.90 46.90 93.80 93.80 93.80 106.30 53.10 100.00 100.00 100.00 100.002BB1632Q KVA 7.50 14.25 14.88 15.00 15.25 28.75 29.38 30.00 16.86 14.73 30.00 30.67 31.20 31.872.00 KVA Load Amps 62.50 125.00 125.00 62.50 62.50 125.00 125.00 125.00 141.70 70.80 133.30 133.30 133.30 133.303BB1632Q KVA 11.25 21.38 22.31 22.50 22.88 43.13 44.06 45.00 25.29 22.10 45.00 46.00 46.80 47.803.00 KVA Load Amps 93.80 187.50 187.50 93.80 93.80 187.50 187.50 187.50 212.50 106.30 200.00 200.00 200.00 200.005BB1632Q KVA 18.75 35.63 37.19 37.50 38.13 71.88 73.44 75.00 42.15 36.83 75.00 76.67 78.00 79.675.00 KVA Load Amps 156.30 312.50 312.50 156.30 156.30 312.50 312.50 312.50 354.20 177.10 333.30 333.30 333.30 333.30Connection Diagram (pg. 7-24) B A A D D C C C A D C C C C7TRANSFORMERSThree Phase — Table 4 Boosting BuckingCatalog Line Voltage 183Y/ 208Y/Number (Available) 106 120195 208 225 240 245 250 256 265 272InsulatingLoad Voltage 208Y/ 236Y/Transformer(Output) 120 136Rating208 236 240 208 230 234 240 234 240050BB1632Q KVA 1.13 1.28 1.13 .62 1.30 .56 1.33 1.35 1.39 .72 .74.050 KVA Load Amps 3.13 3.13 3.13 1.56 3.13 1.56 3.34 3.34 3.34 1.77 1.77100BB1632Q KVA 2.25 2.55 2.25 1.30 2.60 1.13 2.66 2.70 2.77 1.44 1.48.100 KVA Load Amps 6.25 6.25 6.25 3.13 6.25 3.13 6.67 6.67 6.67 3.55 3.55150BB1632Q KVA 3.38 3.83 3.38 1.95 3.90 1.69 3.98 4.05 4.16 2.15 2.21.150 KVA Load Amps 9.38 9.38 9.38 4.69 9.38 4.69 10.00 10.00 10.00 5.31 5.31205BB1632Q KVA 5.63 6.39 5.63 3.17 6.50 2.81 6.64 6.76 6.93 3.59 3.68.250 KVA Load Amps 15.63 15.63 15.63 7.81 15.63 7.81 16.67 16.67 16.67 8.85 8.85505BB1632Q KVA 11.26 12.77 11.26 6.33 12.99 5.63 13.28 13.50 13.86 7.17 7.36.500 KVA Load Amps 31.25 31.26 31.25 15.63 31.25 15.63 33.33 33.33 33.33 17.69 17.71705BB1632Q KVA 16.89 19.16 16.89 9.50 19.49 8.44 19.92 20.26 20.78 10.76 11.04.750 KVA Load Amps 46.88 46.88 46.88 23.44 46.88 23.44 50.00 50.00 50.00 26.54 26.561BB1632Q KVA 22.52 25.55 22.52 12.67 25.98 11.26 26.56 27.02 27.71 14.34 14.721.00 KVA Load Amps 62.50 62.50 62.50 31.25 62.50 31.25 66.67 66.67 66.67 35.39 35.42105BB1632Q KVA 33.77 38.32 33.77 19.00 38.97 16.89 39.84 40.53 41.57 21.52 22.081.50 KVA Load Amps 93.75 93.75 93.75 46.88 93.75 46.88 100.00 100.00 100.00 53.08 53.132BB1632Q KVA 45.03 51.10 46.03 25.33 51.96 22.52 53.11 54.04 55.43 28.69 29.442.00 KVA Load Amps 125.00 125.00 125.00 62.50 125.00 62.50 133.33 133.33 133.33 70.78 70.833BB1632Q KVA 67.55 76.64 67.55 38.00 77.94 33.77 79.67 81.06 83.14 43.03 44.173.00 KVA Load Amps 187.50 187.50 187.50 93.75 187.50 93.75 200.00 200.00 200.00 106.17 106.255BB1632Q KVA 112.58 127.74 112.58 63.33 129.90 56.29 132.79 135.09 138.56 71.72 73.615.00 KVA Load Amps 312.50 312.50 312.50 156.25 312.50 156.25 333.33 333.33 333.33 176.95 177.08Quantity Required 3 3 2 2 2 2 2 2 2 2 2Connection Diagram (pg. 7-24) F F H G H L H H H G G= Warehouse Stock•Output KVA available at reduced input voltage can be found by: •OutputActual Input Voltage Output KVA = New KVA Rating.Rated Input VoltageKVA available at reduced input voltage can be found by:Actual Input Voltage Output KVA = New KVA Rating.Rated Input Voltage7-22Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Warehouse Stock TransformersBuck-Boost240 480 Volts Primary — 24/48 Volts Secondary, 60 Hz, No Taps, Wall MountedSelectionSingle Phase — Table 5 Boosting BuckingCatalog Line VoltageNumber (Available)230 380 416 425 430 435 440 450 450 460 277 480 480 504InsulatingLoad VoltageTransformer(Output)Rating276 418 458 468 473 457 462 495 472 483 231 436 457 480050BB2448Q KVA .29 .44 .48 .49 .49 .95 .96 .52 .98 1.01 .29 .50 1.00 1.05.050 KVA Load Amps 1.04 1.04 1.04 1.04 1.04 2.08 2.08 1.04 2.08 2.08 1.25 1.15 2.19 2.19100BB2448Q KVA .58 .87 .95 .97 .99 1.90 1.93 1.03 1.97 2.01 .58 1.00 2.00 2.10.100 KVA Load Amps 2.08 2.08 2.08 2.08 2.08 4.17 4.17 2.08 4.17 4.17 2.50 2.29 4.38 4.38150BB2448Q KVA .86 1.31 1.43 1.46 1.48 2.86 2.89 1.55 2.95 3.02 .86 1.50 3.00 3.15.150 KVA Load Amps 3.13 3.13 3.13 3.13 3.13 6.25 6.25 3.13 6.25 6.25 3.75 3.44 6.56 6.56205BB2448Q KVA 1.44 2.18 2.38 2.43 2.46 4.76 4.81 2.58 4.92 5.03 1.44 2.50 5.00 5.25.250 KVA Load Amps 5.21 5.21 5.21 5.21 5.21 5.21 10.42 5.21 10.42 10.42 6.25 5.73 10.94 10.94505BB2448Q KVA 2.88 4.35 4.77 4.87 4.93 9.52 9.62 5.16 9.83 10.06 2.88 5.00 10.00 10.50.500 KVA Load Amps 10.42 10.42 10.42 10.42 10.42 20.83 20.83 10.42 20.83 20.83 12.50 11.46 21.88 21.88705BB2448Q KVA 4.31 6.53 7.15 7.30 7.39 14.28 14.44 7.73 14.75 15.09 4.31 7.49 15.00 15.75.750 KVA Load Amps 15.63 15.63 15.62 15.63 15.63 31.25 31.25 15.63 31.25 31.25 18.75 17.19 32.81 32.811BB2448Q KVA 5.75 8.71 9.53 9.74 9.85 19.04 19.25 10.31 19.67 20.13 5.75 9.99 20.00 21.001.00 KVA Load Amps 20.83 20.83 20.83 20.83 20.83 41.67 41.67 20.83 41.67 41.67 25.00 22.92 43.75 43.75105BB2448Q KVA 8.63 13.06 14.30 14.61 14.78 28.56 28.88 15.47 29.50 30.19 8.63 14.99 30.00 31.501.50 KVA Load Amps 31.25 31.25 31.25 31.25 31.25 62.50 62.50 31.25 62.50 62.50 37.50 34.38 65.63 65.632BB2448Q KVA 11.50 17.42 19.07 19.48 19.71 38.08 38.50 20.63 39.33 40.25 11.50 19.98 40.00 42.002.00 KVA Load Amps 41.67 41.67 41.67 41.67 41.67 83.33 83.33 41.67 83.33 83.33 50.00 45.83 87.50 87.503BB2448Q KVA 17.25 26.13 28.60 29.22 29.56 57.13 57.75 30.94 59.00 60.38 17.25 29.98 60.00 63.003.00 KVA Load Amps 62.50 62.50 62.50 62.50 62.50 125.00 125.00 62.50 125.00 125.00 75.00 68.80 131.25 131.255BB2448Q KVA 28.75 43.54 47.67 48.70 49.30 95.20 96.20 51.56 98.30 100.60 28.80 50.00 100.00 105.005.00 KVA Load Amps 104.17 104.17 104.17 104.17 104.20 208.30 208.30 104.17 208.30 208.30 125.00 114.60 218.75 218.75Connection Diagram (pg. 7-24) B D D D D C C D C C B D C CThree Phase — Table 6 Boosting BuckingCatalog Line Voltage 399Y/Number (Available) 230380 430 440 460 460 480 480 440 440 460 460 480 480 500 500InsulatingLoad Voltage 480Y/Transformer(Output) 277Rating418 473 462 506 483 528 504 400 419 438 418 457 436 455 476050BB2448Q KVA .86 .75 .85 1.66 .91 1.74 .95 1.82 .79 1.58 1.66 .83 1.73 .86 .90 1.80.050 KVA Load Amps 1.04 1.04 1.04 2.08 1.04 2.08 1.04 2.08 1.14 2.18 2.18 1.14 2.18 1.14 1.14 2.19100BB2448Q KVA 1.73 1.51 1.70 3.33 1.82 3.48 1.90 3.63 1.59 3.17 3.31 1.66 3.46 1.73 1.80 3.61.100 KVA Load Amps 2.08 2.08 2.08 4.16 2.08 4.16 2.08 4.16 2.29 4.37 4.37 2.29 4.37 2.29 2.29 4.38150BB2448Q KVA 2.60 2.26 2.56 4.99 2.73 5.22 2.85 5.45 2.38 4.75 4.97 2.48 5.19 2.59 2.70 5.41.150 KVA Load Amps 3.12 3.13 3.12 6.24 3.12 6.25 3.12 6.24 3.43 6.55 6.55 3.43 6.55 3.43 3.43 6.56205BB2448Q KVA 4.33 3.77 4.26 8.32 4.56 8.70 4.76 9.08 3.96 7.92 8.28 4.14 8.64 4.32 4.51 9.02.250 KVA Load Amps 5.20 5.21 5.20 10.40 5.20 10.40 5.20 10.40 5.72 10.92 10.92 5.72 10.92 5.72 5.72 10.94505BB2448Q KVA 8.60 7.54 8.52 16.64 9.11 17.40 9.51 18.16 7.93 15.85 16.57 8.28 17.29 8.64 9.02 18.04.500 KVA Load Amps 10.40 10.42 10.40 20.80 10.40 20.80 10.40 20.80 11.44 21.84 21.84 11.44 21.84 11.44 11.44 21.88705BB2448Q KVA 12.90 11.31 12.77 24.97 13.67 26.10 14.27 27.24 11.89 23.77 24.85 12.42 25.93 12.96 13.52 27.06.750 KVA Load Amps 15.60 15.63 15.60 31.20 15.60 31.20 15.60 31.20 17.16 32.76 32.76 17.16 32.76 17.16 17.16 32.811BB2448Q KVA 17.30 15.08 17.03 33.29 18.23 34.80 19.02 36.31 15.85 31.70 33.14 16.57 34.57 17.28 18.03 36.081.00 KVA Load Amps 20.80 20.83 20.80 41.60 20.80 41.60 20.80 41.60 22.88 43.68 43.68 22.88 43.68 22.88 22.88 43.75105BB2448Q KVA 25.90 22.62 25.55 49.93 27.34 52.50 28.53 54.47 23.78 47.55 49.71 24.85 51.86 25.92 27.05 54.131.50 KVA Load Amps 31.20 31.25 31.20 62.40 31.20 62.40 31.20 62.40 34.32 65.52 65.52 34.32 65.62 34.32 34.32 65.632BB2448Q KVA 34.60 30.17 34.07 66.58 36.46 69.60 38.04 72.63 31.70 63.40 66.27 33.13 69.15 34.56 36.06 72.172.00 KVA Load Amps 41.60 41.67 41.60 83.20 41.60 83.20 41.60 83.20 45.76 87.36 87.36 45.76 87.36 45.76 45.76 87.503BB2448Q KVA 52.00 45.25 51.18 100.03 54.69 104.57 57.07 109.12 47.63 95.25 99.57 49.77 103.89 51.92 54.18 108.253.00 KVA Load Amps 62.50 62.50 62.50 125.00 62.50 125.00 62.50 125.00 68.75 131.25 131.25 68.75 131.25 68.75 68.75 131.255BB2448Q KVA 86.10 75.42 85.17 166.44 91.15 174.01 95.11 181.57 79.26 158.50 165.69 82.83 172.87 86.39 90.16 180.425.00 KVA Load Amps 104.00 104.17 104.00 208.00 104.00 208.00 104.00 208.00 114.40 218.40 218.40 114.40 218.40 114.40 114.40 218.75Quantity Required 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2Connection Diagram (pg. 7-24) E G G H G H G H G H H G H G G H7 TRANSFORMERS= Warehouse Stock•Output voltage for lower input can be found by:Rated Output Voltage Input Actual Voltage = Output New Voltage.Rated Input Voltage•Output KVA available at reduced input voltage can be found by:Actual Input Voltage Output KVA = New KVA Rating.Rated Input Voltage• Inputs and outputs may be reversedwithout affecting KVA capacity. Seenote on page 7-24.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 7-23

Buck-Boost TransformersSingle Phase, Three PhaseSingle PhaseDiagram AThree PhaseNote:Typical Connection DiagramsContact sales office for diagrams applicable to “Q” suffix.Diagram E Diagram F Diagram G High VoltageLow VoltageLow VoltageLow VoltageDiagram BHigh VoltageWYEHigh VoltageWYEHigh VoltageOpen DeltaHigh VoltageDiagram J Low VoltageDiagram H Low VoltageDiagram CHigh VoltageLow VoltageHigh VoltageWYEHigh VoltageOpen DeltaDiagram K Low VoltageDiagram L High Voltage7Diagram DLow VoltageTRANSFORMERSHigh VoltageHigh VoltageWYELow VoltageOpen Delta(Standard Step-down Application)**Low Voltage Applications:By using the “Standard Step-down Application” diagram at left, buck boost transformerswill convert 120V or 240V to 12, 24, 16 or 32 volts and 240V or 480V to 24 or 48 voltswithout affecting the nameplate KVA rating of the transformer. Buck boost transformersused in this type of application will become isolation or insulating type transformers. These diagrams can only be used when the source is a4-wire supply. The neutral XO should not be used when the source is athree wire supply.Note:•Inputs and Outputs may be reversed; KVA capacityremains constant. Exception: Cannot use 3-wire inputwith 4-wire output to form a neutral and does notapply to standard step-down applications.•Refer to NEC 450-4 for overcurrent protection of anautotransformer.•All applications are suitable for 60Hz only.7-24Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

8SPEEDFAX TM 2007-2008 Power MonitoringContentsPower Monitoring Systems Overview 8-2Intelligent Metering and Control Devices 8-39200 Power Meter 8-49300 Power Meters 8-59330/9350 Power Meters 8-69510/9610 Power Meters 8-79510 ADR Advanced Data Recorder 8-8WinPM.Net Software 8-9Current and Voltage Transformers 8-10Application Engineering Services and Training 8-11Siemens ACCESS power monitoring systems provide thehardware and software for complete power informationmanagement and control.Features▪ Power Quality Reliability and Analysis▪ Electrical Asset Management▪ Utilities Cost Allocation and Billing▪ Utilities Usage Aggregation▪ Load Studies and Circuit Optimization▪ Demand and Power Factor Control▪ Load Preservation▪ Equipment Monitoring and Control▪ JCAHO Compliance Testing▪ Facility Monitoring and Automation▪ Sequence of Events Recording▪ Preventative MaintenanceFor technical assistance contact:1-800-427-2256Email your questions:Access.Support@siemens.com8 POWERMONITORINGFor latest information go to:www.sea.siemens.com/ACCESSResidential Commercial Industrial

Totally Integrated PowerSystem OverviewGeneral272 610237 10 1114912 61072 6 101 211147829771 21 47 10 111 4 9261072623671421172351123710111 2 3 4 57 8 9 10 118POWERMONITORING1. Power MetersSiemens’ ACCESS power monitors combine the best of newtechnologies and proven practices. Monitor critical loads, powerquality, and demand via the web directly from the meters.2. Power Monitoring SoftwareWinPM.Net web-enabled software facilitates easy, enterprise-wideconnection to power monitoring equipment, circuit breakers, andother devices from Siemens and third parties. Access informationvia the web with unlimited no-cost clients using built-in WebReach TMvia your web browser.3. Communications NetworksUtilize existing Ethernet or RS-485 communications networks toextract the information you need and get it where it needs to go.4. ComponentsCurrent Transformers (CTs), Voltage/Potential Transformers (PTs),Power Supplies, Ethernet Switches, Protocol Converters. Siemenscan provide everything required for your system.5. Intelligent I/OOur S7 I/O enables plug-n-play communications with Modbusdevices and expands digital and analog input and output functionalityof ACCESS Systems.6. Billing and Load Allocation SoftwareACCESS Energy Manager is the low-cost, simplified solution for costallocation, billing & load/demand analysis using your web browser.7. Engineering ServicesPDS Application Engineers can help from design throughcommissioning of even the most demanding power qualityand monitoring systems.8. Motor Control CentersMonitor mains and feeders for critical or power-intensive loads.Communicate with breakers (Static Trip III, SBEC), SAMMS,SIMOCODE, I/O and devices from other manufacturers. UseACCESS power meters to web-enable new as well as existing MCCs.9. Low & Medium Voltage SwitchgearWeb-enable switchgear by having ACCESS monitor power as wellas breaker status and upload the information to a corporate Intranetor to the Internet. Use MeterMail TM directly from meters for alarmconditions or simple reporting.10. Facility Management SystemsTie into building automation systems to provide the requiredpower and energy information. Lots of communications optionsare available ranging from legacy protocols to XML directly fromthe power monitors.11. Distributed Control Systems, Automation, andSCADA/Human Machine InterfaceACCESS power monitors and/or software can talk to all majorvendors’ systems.8-2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Totally Integrated PowerIntelligent Metering and Control DevicesGeneral9100 9200 9300 9330 9350 9510 ADR 9510 9610/9610HPOWER, ENERGY and DEMANDVoltage/current: per phase, average • • • • • •Voltage/current: unbalance • • • • •Power: real, reactive, apparent, power factor, frequency kW/kWh • • • • • •Energy: bi-directional, import, export • • • • • •Energy: total, net • • • • •Demand: block, sliding window • • • • • •Demand: thermal predicted • • • • •POWER QUALITY ANALYSISSag/swell monitoringSymmetrical components: zero, negative, positive• • ••Transient detection, microseconds 65/17Harmonics (individual, even, odd, total) up to THD only 15th 15th 31st 63rd 127th/256thSampling rate, maximum samples/cycle 64 32 32 64 256 512/1024Flicker, harmonics to EN50160, IEC 6100-4-7 / 4-15•Configurable for IEEE 519-1992, IEEE 1159, SEMI/ITIC•“Number of nines” uptime data (3 nines=99.9%) • •DATA and WAVEFORM LOGSTriggered by setpoint, schedule, or external signal • • • •Sequence-of-event logs, variable log depth • • • •Minimum/maximum logs for any parameter • • • •Historical logs, maximum # of channels 1 32 96 800 800 800Waveform logs, maximum # of consecutive cycles 48 96 96Time-stamps, resolution in seconds • 0.001 0.001 0.001 0.001GPS time synchronization • • •COMMUNICATION PORTS and I/O ( ) = OptionalRS-232/485 ports 1 1 1RS-485-only ports 1 1 2 2 1 1 1Ethernet ports (1) (1) (1) (1) (1) (1)Infrared optical ports 1 1 1 1 1 1WirelessTransmission•PROFIBUS ports (1)Built-in modems (1) (1) (1) (1) (1)Modbus RTU Slave on serial, modem or infrared ports(If equipped with modem or infrared port) • • • • • • •Modbus RTU Master on serial ports • • •Modbus/TCP on Ethernet ports • • • • • •DNP 3.0 on serial, modem, infrared ports • • • • •EtherGate: 31 other meters accessible via RS-485 • • • • •ModemGate: 31 other meters accessible via RS-485 • • • • •MeterM@il®: data e-mailed from meter • • • • •WebMeter®: on-board web server • • • • • •XML • • • • • •Analog inputs (4) (4) (4) (4) (4) (4)Analog outputs (4) (4) (4) (4) (4) (4)Digital status/counter inputs (standard/optional add-ons) 4 4 8/8 8/8 8/8Digital relay outputs (control/pulse) 2 4 4 4 7 7 7SETPOINTS, ALARMING and CONTROLSetpoints, minimum response time 1 sec 1 sec 1⁄2 cycle 1⁄2 cycle 1⁄2 cycleMath, logic, trig, log, linearization formulas • • • • •Single- and multi-condition alarms • • • • •Call-out on alarm • • • • •REVENUE METERINGANSI C12.16 accuracy compliant • • • • • •ANSI C12.20 0.2 compliant • • •IEC 60687 0.2S compliant • •IEC 60687 accuracy class 0.5S compliant • • • • • •ANSI class 10 (5A nominal, 10A max) • • •ANSI class 2, IEC 1/10 (1A nominal, 10A max) • •ANSI class 20, IEC 5/20 (5A nominal, 20A max) • •MV-90 on serial; Ethernet ports • • • •Time-of-use • • • •Transformer/line loss compensation • •8 POWERMONITORINGSome features are optional. Refer to datasheets for allowable port configurations. Products meet or exceed the accuracy requirements of the standards listed; due to form factors, notall ANSI/IEC compliance tests may apply. Some products certified by third-party laboratory.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 8-3

8POWERMONITORINGTotally Integrated Power9200 Power Meter SelectionFeatures▪ Use the 9200 Power Meter for basicmetering applications, like sub-billing,cost allocation and tenant monitoring▪ For use in Switchboards to replacemultiple analog meters and rotaryswitches, with less space and wiring▪ Choose between two mounting options,and one of three measurement packages.All units come standard with Modbus/RTURS-485 communication. The 9200 withno display is excellent for low costsub-metering applications inswitchboardsHigh AccuracyMeasurement Method and Accuracy▪ 64 samples per cycle▪ IEC 60687 class 0.5 accuracy▪ 4 quadrant energy and demand▪ Per phase voltage, current, peak currentdemand, watts, VARs, kWh, and more▪ Neutral current, THD, frequency, powerfactor and more▪ Revenue AccurateBuilding Management InterfacePulse Output Option▪ kWh and/or kVARh and/or kVAh pulsing▪ Rated 100mA, 200 VAC/DCSystem IntegrationCommunications▪ Industry standard protocol, ModbusRTU, for use with WinPM.Netsoftware or any Modbus compatiblesystemStandard MeasurementsVoltage (l-n), per phase, avg.Voltage (l-l), per phase, avg.Current, per phase, avg.Meter OptionsEnhanced Package #1Includes standard measurements andadds:Energy,(kWh) Imported/Exported TotalPower, (kW)Total Peak Power Demand (kW)*Current Demand, Avg + Per Phase PeakCurrent Demand, Avg + Per PhaseCurrent, Neutral FrequencyPower Factor, Total9200 Meter Catalog Number ConfigurationDescriptionMeter base unit and diplay optins• Integrated display unit with RS-485 and Modbus RTU communication• Remote display unit with RS-485 and Modbus RTU communication• Non-display unit with RS-485 and Modbus RTU communicationMetering Options• Configured for Volts and Amps per phase and avg.• Configured for Volts and Amps per phase and avg. with Energy/Power,Frequency, PF (package #1)• Configured for Volts and Amps per phase and avg. with Energy/Power,Frequency, PF, KVAR, kVA, andTHD (package #2)Enhanced Package #2Includes all the preceding parametersand adds:Power, (kW) Per Phase*Power Factor, Per PhaseReactive Energy (KVARh) Import/Export*Apparent Energy, (kVAh)*Reactive Power, (kVAR) Per Phase & Total*Apparent Power, (kVA) Per Phase & Total*Reactive Power, (kVAR) Peak Demand*Apparent Power, (kVA) Peak Demand*THD Voltage & Current, Per PhaseEnergy, (kWh) Import/Export Per Phase*Meter Catalog Number9200 D D - 1 Z Z APower Supply• 100-240 Vac / 110-300Vdc 1• 435-530Vac 2• 20-60 Vdc 3Digital Output•None•Two optically isolated Form A outputs for kWh, kVAh or kVARh energypulsingSecurity Options for Revenue Metering• Password ProtectedSpecials•NoneDRTADGZAZAPower Supply▪ 100-240 VAC (50-60 Hz)/110-300 VDC▪ 20-60 VDC (+/-10%)▪ 480 VAC*Meets or exceeds IEC 60687 class 0.5 accuracy.**As represented in SPACE 2000.8-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PDS

Totally Integrated Power9300/9330/9350 Low Cost Web-enabled Power Meter SelectionUse the 9300 Power Meter for basicmetering applications, like sub-billing, costallocation, tenant monitoring and for anyPROFIBUS applications.Use the 9330 Power Meter where onboarddata logging and setpoint-based alarms arerequired. An optional, built-in modem isavailable, and can be used as a gatewayfor up to 31 additional devices.Use the 9350 where -- in addition to all ofthe above -- waveforms are required. Alsohas sag/swell, enhanced harmonics, andfaster sampling rates.All meters have the option of adding anetwork card which provides an Ethernetport and access to onboard web pages,for easy viewing of real-time data fromyour desktop browser. This also enablesMeterMail, a function that allows themeters to send messages to PCs, pagers,cell phones, PDAs and other mobiledevices. These messages can be alarms,data, peak demand notifications, etc.Mounting Options:▪ Integrated Display for panel mounting▪ Remote Display▪ No display▪ In FT21 or S1 switchboard case forretrofit applicationsMeasurements▪ Hundreds of high accuracy powermeasurements▪ Harmonics to the 15th for 9300 &9330, to the 31st for the 9350▪ Predicted kW demand for demandcontrol applicationsDigital Inputs and Outputs▪ 4 digital inputs for status/counterfunctions, log gas, water, steam andair inputs▪ 4 digital outputs for control/pulseDraw-Out Case OptionAvailable in 9300, 9330 and9350 meter stylesWaveform Capture (9350 only)▪ Capture from 12 to 48 cycles on all channelsat 16 to 64 samples per cycle▪ Sag/swell detection to trigger waveforms onout-of-tolerance conditionsAnalog Inputs and Outputs▪ 4 - 4-20mA Inputs and Outputs▪ 4 - 0-1mA Inputs and OutputsCommunications▪ 9300 single RS-485 port, Ethernet option▪ 9330 two RS-485 ports std, Ethernet andModem optional▪ 9350 two RS-485 ports std, Ethernet andModem optionalSupported Protocols▪ 9300 SEAbus/ION, PROFIBUS, Modbus RTU& TCP▪ 9330 SEAbus/ION, Modbus RTU & TCP,DNP3.09300 Meter Catalog Number ConfigurationDescriptionMeter base unit and diplay options• Meter with integrated display• Meter with remote display (includes 6' cable and surface mount transducer)• Meter without display (Surface mount transducer version)• Meter with integrated display installed in S1 retro-fit switchboard kit (meter incage with cover, no casing)• Meter with integrated display installed in FT21 retro-fit switchboard kit (meterin cage with cover, no casing)Communicatons• RS485 with Modbus RTU (for use with integrated display only - when selecting“D”, “S” or “F” base unit above)• RS485 with Modbus RTU (for use with transducer version only - whenselecting “T” or “R” base unit above)• Profibus (for use with integrated display model only - selection “D” above)Power Supply• 85-240 VAC/VDC 1• 20-60 VDC 2▪ 9350 SEAbus/ION, Modbus RTU & TCP,DNP3.0▪ EtherGate allows direct Ethernet-to RS-485data transfer to 31 other devices▪ Infrared data port standardOnboard Data Logging▪ 9330 - Log up to 32 parameters for 30 days▪ 9350 - Same as 9330 plus three6-channelwaveform captures, fully configurable▪ Sequence-of-events and min/max loggingSetpoints for Control and Alarms▪ Create custom set-points on any parameteror condition▪ 1 second operation▪ Control demand with peak shaving andadvanced notification of approaching peaksMeter Catalog Number9300 D C - 1 0 0 - N Z Z Z AInput Voltage• 50-347 VAC 0Input Frequency•50-60Hz 0Network Card or Analog I/O (Analog options not available with Profibus orRemote andTransducer base unit options)• None• Ethernet Communication (10BaseT) RJ-45 Port• 4 Analog Inputs 0 to 1 mA• 4 Analog Inputs 0 to 20 mA• 4 Analog Outputs 0 to 1 mA• 4 Analog Outputs 0 to 20 mA• 4 Analog Inputs 0 to 1 mA & 4 Analog Outputs 0 to 1 mA• 4 Analog Inputs 0 to 20 mA & 4 Analog Outputs 0 to 20 mAWire Terminal Type for Input Voltage & Current Connections• Ring/Split/Bare wire type• Barrier/Captured wire typeMeter Mounting Options• Standard panel mounting• DIN Rail Kit (available for Remote “R” orTransducer “T” type base units only)Tropicalization Protection• None•YesSpecials• NoneDRTSFCMPZNBCDEFGZPZDZTA8 POWERMONITORINGDiscount Schedule PDSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 8-5

Power Monitoring9330/9350 Power Quality Meter with Web Server Technology Selection9330/9350 Meter Catalog Number ConfigurationDescriptionMeter base unit and diplay options• Meter with integrated display• Meter with remote display (includes 6' cable and surface mount transducer)• Meter without display (Surface mount transducer version)• Meter with integrated display installed in S1 retro-fit switchboard kit (meter in cagewith cover, no casing)• Meter with integrated display installed in FT21 retro-fit switchboard kit (meter incage with cover, no casing)Meter Catalog Number9330D C - 1 0 0 - O Z Z Z Z A9350DRTSFCommunications• RS485 with Modbus RTU (for use with integrated display only - when selecting “D”,“S” or “F” base unit above)• RS485 with Modbus RTU (for use with transducer version only - when selecting“T” or “R” base unit above)CMPower Supply• 85-240 VAC/VDC 1• 20-60 VDC 2Input Voltage• 50-347 VAC 0Input Frequency• 50 - 60 Hz 0Modem• None 0• Modem w/ RJ-11 (See Note 1 below) 1• Modem w/ plug connector (See Note 1 below) 2Network Card or Analog I/O(Analog options not available with Remote orTransducer base unit options)• None• Ethernet Communication (10BaseT) RJ-45 Port• 4 Analog Inputs 0 to 1 mA• 4 Analog Inputs 0 to 20 mA• 4 Analog Outputs 0 to 1 mA• 4 Analog Outputs 0 to 20 mA• 4 Analog Inputs 0 to 1 mA & 4 Analog Outputs 0 to 1 mA• 4 Analog Inputs 0 to 20 mA & 4 Analog Outputs 0 to 20 mAZNBCDEFGWire Terminal Type for input voltage & current connections• Ring/Split/Bare wire type• Barrier/Captured wire typeZP8Meter Mounting Options• Standard panel mounting• DIN Rail Kit (available for Remote “R” or Transducer “T” type base units only)ZDPOWERMONITORINGTropicalization Protection• None• YesSpecials• NoneZTANote 1 — The listed modems are suitable for USA applications. Contact Sales for special versions.8-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Totally Integrated Power9510/9610 Power Quality Meter with Web Server Technology Selection9510/9610 Power MeterPower Quality Meter with Web ServerTechnology▪ Use the 9510 Power Quality Meter atservice entrance points, on critical loads,and at locations requiring power qualityanalysis▪ Use the 9610 Power Quality Meter tomeet all the requirements above andwhere high-speed transient capture,additional memory for data loggingand/or compliance monitoring is required▪ Both meters have the option of adding anetwork card, which provides anEthernet port and access to onboardweb pages for easy viewing of real-timedata from your desktop browser. Alsoincludes e-mail for alarms as well asfor sending scheduled data such asmonthly kWhMounting Options:▪ Integrated Display for panel mounting▪ Transducer (TRANS) with no displaywhere local display is not requiredMeasurements▪ Hundreds of high accuracy powermeasurements▪ Harmonics to the 127th for 9510, tothe 511th for the 9610▪ Predicted kW demand for demandcontrol applicationsStandard Digital Inputs and Outputs▪ 8 digital inputs for status/counterfunctions. Log gas, water, steam, airinputs, breaker status, etc.▪ 4 digital outputs for control/pulse▪ 3 relay outputs for controlAdditional I/O▪ 4 - 4-20mA Inputs and Outputs▪ 4 - 0-1mA Inputs and Outputs▪ 8 Digital InputsWaveform Capture▪ Capture from 7 to 96 cycles on allchannels at 16 to 1024 samples perchannel per cycle per event. Multipleevents can be linked to form acontinuous waveform strip chart▪ 1 cycle Sag/swell detection to triggerwaveforms on out-of-toleranceconditionsTransient Capture▪ The 9610 can detect and recordsub-cycle transients as short as 17microsecondsCommunications▪ 9510 two RS-485 ports standard,Ethernet and Modem optional▪ 9610 two RS-485 ports standard,Ethernet and Modem optional▪ Meter Mail allows e-mail of alarms ordata logs by schedule or event drivenSupported Protocols▪ 9510 SEAbus/ION, Modbus RTU & TCP,DNP3.0, XML9510/9610 MeterCatalog Number ConfigurationDescriptionMeter base unit and diplay options• Meter with integrated display, and 5 MB logging memory• Meter with integrated display, and 10 MB logging memory• Meter without display, with 5 MB logging memory(Transducer version)• Meter without display, with 10 MB logging memory(Transducer version)Sampling Rate• 512 sampling• 1024 Sampling▪ 9610 SEAbus/ION, Modbus RTU & TCP,DNP3.0, XML▪ EtherGate allows direct Ethernet-toRS-485 data transfer to 31 other devices▪ ModemGate allows direct modem-toRS-485 data transfer to 31 other devices▪ Infrared data port standardModbus Master▪ Bring other devices’ information intothe meter using the Modbus Mastercapability. Store data onboard in themeter, display locally, create set-pointsfor the logged values and perform logicfunctions. Web server posts slavedevice data to web pagesMeter Catalog Number9510D C - 1 1 5 6 -9610Power Supply• 85-240 Vac/Vdc 1• 20-60 Vdc 2Input Voltage• 57 to 347 L-N / 100 to 600 L-L Vac 1Input Current• 1A Nominal (10 Amp full scale) 1• 5A Nominal (20 Amp full scale) 5System Frequency• 50 Hz 5• 60 Hz 6Communication Cards Ethernet EthernetRS232/RS485 Infrared Modem 10Base-T(Selectable) RS485 (Note 1) (Notes 1 & 2) with RJ45 10Base-FLX X X AX X X X BX X X X CX X X X X DX X X X X EX X X X X X FAuxiliary I/O Cards• Optiom #1 - None (base meter includes 8 digital in & 7 digital out)• Optiom #2 - 8 Binary Inputs; 4 Analog Inputs 0 to 1 mA• Optiom #3 - 8 Binary Inputs; 4 Analog Inputs 0 to 20 mA• Optiom #4 - 8 Binary Inputs; 4 Analog Outputs -1 to 1 mA• Optiom #5 - 8 Binary Inputs; 4 Analog Outputs 0 to 20 mA• Optiom #6 - 8 Binary Inputs; 4 Analog Inputs 0 to 20 mA & 4 Analog Outputs 0 to 20 mA• Optiom #7 - 8 Binary Inputs; 4 Analog Inputs 0 to 1 mA & 4 Analog Outputs -1 to 1 mATropicalization Protection•None•YesSpecials• Standard (password protected, no locking or sealing)• Password protected and hardware lockable (lock enabled/disabled via jumper on comm card)• EN50160 compliance monitoring• EN50160 compliance monitoring with password protection and hardware lockableDETUCHAB Z Z A DZBCDEFGZTABCD8 POWERMONITORINGNote 1 — The infrared and modem connections cannot be operated simultaneously. The connection type is configurable.Note 2 — The listed modems are suitable for European applications. Contact Sales for special versions.Discount Schedule PDS Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 8-7

Totally Integrated PowerCritical Process Monitoring with the 9510/9610Siemens Advanced Data Recorder(ADR)For use as a low-cost data concentrator or localdisplay, the 9510 ADR is a multi-function devicewhich supports multiple protocols, digital and I/Ooptions, and customizable displays. Each unitmust be custom configured for your application.Standard units are shipped with displays only forthe digital I/O status. To use the unit as a LocalDisplay, custom programming is required.Features:▪ Monitor breaker status changes with 1msresolution▪ Collect, log and scale pulse inputs from water,air, gas, electricity or steam meters▪ Act as an Ethernet Gateway for serial devices▪ Display Modbus slave information locally and viaHTML web pages▪ Log data and e-mail alarms from DownstreamModbus devices▪ Display trip unit data from WL, Static Trip III andSB-EC devices▪ Trigger alarms based on setpoint conditionsLocal Display for WL Power Breaker9510 ADR 9510 ADR WiringCOM 1WL Trip Units (max 16 devices)Selection▪ Consolidate data from multiple devices in a central display.▪ View real-time and breaker status for up to 16 WLbreakers, with 20 points per trip unit.▪ WL Breakers must include a COM 16 module forcommunication capability.▪ Factory configured and installed.▪ View real-time and breaker status for up to 16 Static Trip IIIunits, with 20 points per breaker.▪ SPI-1000 is required for communication between9510 ADR and Static Trip III.9510 ADR Catalog Number ConfigurationDescriptionMonitor Base Unit Type• Monitor with integrated display, and 5 MB logging memory• Monitor with integrated display, and 10 MB logging memory• Monitor without display, with 5 MB logging memory(Transducer version)• Monitor without display, with 10 MB logging memory(Transducer version)Communication• ModbusMeter Catalog Number9510 D C - 2 R T U - B Z Z ADETUCWater, Air, Gas and Steam MonitoringThe Advanced data recorder comes withDigital inputs which can be configured forpulse counting applications where fullutility monitoring is required.Now gas, water, air and steam pulsescan be collected in one unit, logged anddisplayed. Up to 16 digital inputs can beadded.Local DisplayPower Supply• 85-240 Vac/Vdc 1• 20-60 Vdc 28POWERMONITORINGDevice• Remote Transducer Unit R T UCommunication Cards5 Infrared Modem 10Base-T(Selectable) RS485 (Note 1) (Notes 1 & 2) with RJ45 10Base-FLX X X AX X X X BX X X X CX X X X X DX X X X X EX X X X X X FAuxiliary I/O Cards• None (base meter includes 8 digital in & 7 digital out)• 8 Binary Inputs; 4 Analog Inputs 0 to 1 mA• 8 Binary Inputs; 4 Analog Inputs 0 to 20 mA• 8 Binary Inputs; 4 Analog Outputs -1 to 1 mA• 8 Binary Inputs; 4 Analog Outputs 0 to 20 mA• 8 Binary Inputs; 4 Analog Inputs 0 to 20 mA & 4 Analog Outputs 0 to 20 mA• 8 Binary Inputs; 4 Analog Inputs 0 to 1 mA & 4 Analog Outputs -1 to 1 mAZBCDEFGTropicalization Protection• None•YesZTSpecials• Standard (password protected, no locking or sealing)A* Factory Programming Available (contact sales or refer to Engineering Service price list).8-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Totally Integrated PowerWinPM.Net SoftwareWinPM.Net web-enabled software is acomplete energy information managementsolution for your business. It offers controlcapabilities, comprehensive power qualityand reliability analysis and can help youreduce energy related costs. WinPM.Netallows you to manage our intelligentmetering, monitoring and control devices,analyze data, and decide on new coursesof action.Its cutting-edge flexibility and compatibilitymeans you can add one piece at a time,at your own pace, while still maintainingyour original investments. Interface toyour existing systems throughindustry-standard protocols and choosenewer components as they becomeavailable. WinPM.Net is a powerfulsoftware suite that can process, analyze,store, and share data across your entireenterprise. You can access informationfrom any desktop workstation, locally oraround the world, in the format you need.The software collects data through serial,wireless, modem, or Ethernet links, soyou can manage a single site or a globalnetwork of devices.Device CompatibilityWinPM.Net supports all currentACCESS field devices, including thefollowing:▪ 9700 Power Meter▪ 9610 Power Meter▪ 9510 Power Meter▪ 9350 Power Meter▪ 9330 Power Meter▪ 9300 Power Meter▪ 9200 Power Meter▪ 4720 Power Meter▪ 4700 Power Meter▪ 4300 Power Meter▪ ISGS intelligent Switchgear System▪ SB Energy Communicating BreakerUnit (SBEC)▪ WL/VL Low Voltage Power CircuitBreakers▪ Static trip III Trip Unit▪ S7 I/O▪ Siemens Advanced Motor MasterSystem (SAMMS)▪ ISGS MV Relays▪ Most third party Modbus DevicesFeatures Summary:▪ Unlimited no-cost view only clientsusing standard web browser▪ Data Acquisition▪ Monitoring▪ Analysis▪ Control▪ Equipment Monitoring and Control▪ Preventative MaintenanceCustomized System Diagrams:▪ Powerful Aggregation and control Tools▪ All configuration tools are included asstandard; no separate development/runtime licensesWinPM.Net: for Analysis and Control:▪ Display and Configuration▪ Power Quality▪ Cost Allocation▪ Automated Control▪ Logging Data from Devices▪ Load Aggregation▪ Modbus MasterWinPM.Net Networks:▪ Serial Sites▪ Ethernet Sites▪ Modem Sites▪ Gateway Sites▪ Web Deployment▪ Time Synchronization▪ Third Party IntegrationCustom Graphical Interface:▪ Reporting & Visualization▪ Device Configuration▪ Firmware Upgrade Utility▪ Configuration ToolsWinPM.Net Monitoring Your PowerSystem:▪ Take Advantage of Default Views▪ Power Quality Displays▪ Customize Your Backgrounds▪ Display Data the Way You Want▪ Receive Alarms at Your Desktop or onYour Mobile Device (Pager, Cell phone,PDA, etc.)▪ Access WinPM.Net Remotely from anyNetworked PC Using Web Browser(Internet Explorer).▪ Perform Manual Control Operations▪ Create Your Own Database Queries▪ Check Status Indicators▪ Generate Trend Graphs▪ Tunnel into Details with “Hot Spots”▪ Share data with other ODBC programsGeneralApplications:▪ Power Quality and Reliability Analysis▪ Cost Allocation and Billing▪ Load Studies and Circuit Optimization▪ Demand and Power Factor Control▪ Equipment Monitoring and Control▪ Preventative MaintenanceWinPM.Net Data Analysis:▪ Standard Reports▪ Aggregate Energy and DemandReports▪ Aggregate Load Profile Reports▪ Power Quality Reports▪ EN50160 Reports• Custom ReportsOrdering Information:WinPM.Net is packaged based on thenumber of devices (power monitors, circuitbreakers, protective relays, etc.) that willbe monitored.Consult factory for pricing andconfiguration recommendations.Start-up services are required forall software sales.Email:Access.Support@sea.siemens.comToll-free: 1-800-427-22568 POWERMONITORINGSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 8-9

Totally Integrated PowerCurrent & Voltage Transformers (Metering Grade)Low Voltage Current Transformers (Metering Grade)Selection8POWERMONITORINGPrimary Description Secondary Accuracy Catalog NumberSplit Core - Rectangular Metering Grade, 600V, 0.5% Accuracy100A 1.25" x 1.51" Window 5A Output PDS-CTSC-011200A 1.25" x 1.51" Window 5A Output PDS-CTSC-021300A 1.25" x 1.51" Window 5A Output PDS-CTSC-031400A 2.45" x 2.89" Window 5A Output PDS-CTSC-042600A 2.45" x 2.89" Window 5A Output PDS-CTSC-062800A 2.45" x 2.89" Window 5A Output PDS-CTSC-0821000A 2.45" x 5.50" Window 5A Output PDS-CTSC-0131200A 2.45" x 5.50" Window 5A Output PDS-CTSC-1231600A 2.45" x 5.50" Window 5A Output PDS-CTSC-1632000A 2.75" x 6.625" Window 5A Output PDS-CTSC-02R3000A 2.75" x 6.625" Window 5A Output PDS-CTSC-03RSplit Core - Round Metering Grade, 600V200A 4.0" Window 5A Output 4% Accuracy PDS-CTHC-024300A 4.0" Window 5A Output 4% Accuracy PDS-CTHC-034400A 4.0" Window 5A Output 3% Accuracy PDS-CTHC-044600A 4.0" Window 5A Output 2% Accuracy PDS-CTHC-064800A 4.0" Window 5A Output 2% Accuracy PDS-CTHC-0841200A 4.0" Window 5A Output 2% Accuracy PDS-CTHC-1243000A 6.0" Window 5A Output 2% Accuracy PDS-CTHC-3062000A 6.0" Window 5A Output 2% Accuracy PDS-CTHC-2064000A 6.0" Window 5A Output 2% Accuracy PDS-CTHC-406Solid Core - Round Metering Grade, 600V, 0.3 % Accuracy200A 1.25" Window 5A Output PDS-CTRC-021300A 1.25" Window 5A Output PDS-CTRC-031400A 1.25" Window 5A Output PDS-CTRC-041500A 1.25" Window 5A Output PDS-CTRC-051600A 1.25" Window 5A Output PDS-CTRC-061800A 1.25" Window 5A Output PDS-CTRC-0811000A 1.25" Window 5A Output PDS-CTRC-101100A 2.25" Window 5A Output PDS-CTRC-012200A 2.25" Window 5A Output PDS-CTRC-022300A 2.25" Window 5A Output PDS-CTRC-032400A 2.25" Window 5A Output PDS-CTRC-042800A 4.0" Window 5A Output PDS-CTRC-0841000A 4.0" Window 5A Output PDS-CTRC-1041200A 4.0" Window 5A Output PDS-CTRC-1241600A 4.0" Window 5A Output PDS-CTRC-1642000A 4.0" Window 5A Output PDS-CTRC-2043200A 6.5" Window 5A Output PDS-CTRC-3264000A 6.5" Window 5A Output PDS-CTRC-426Solid Core - Round Metering Grade, 600V, 0.3 % Accuracy100A 1.75" x 2.47", 1" Window 5A Output SMU-CT-011200A 1.75" x 2.47", 1" Window 5A Output SMU-CT-021250A 1.75" x 2.47", 1" Window 5A Output SMU-CT-025300A 1.75" x 2.47", 1" Window 5A Output SMU-CT-031400A 1.1" x 3.56", 1.56" Window 5A Output SMU-CT-041600A 1.1" x 3.56", 1.56" Window 5A Output SMU-CT-061800A 1.1" x 3.56", 1.56" Window 5A Output SMU-CT-0811000A 1.1" x 3.56", 1.56" Window 5A Output SMU-CT-1232000A 1.15" x 5.73", 3.25" Window 5A Output SMU-CT-02R2500A 1.15" x 5.73", 3.25" Window 5A Output SMU-CT-25R3000A 1.15" x 5.73", 3.25" Window 5A Output SMU-CT-30R4000A 1.15" x 5.73", 3.25" Window 5A Output SMU-CT-40RVoltage Transformers - Metering Grade, 600V and 5KV, +/- 1% Accuracy at all burdensup to 5VA at 1.0 and .95 pfCatalog Number Description Primary Secondary467-480 Potential Transformer (4:1) 480 V 120 V467-288 Potential Transformer,277:120V L-N 2.4:1 277 V 120 VPTW3-2-60-242 Potential Transformer, 2 BUSHINGS, NO FUSES 2400 V 120 VPTW5-2-110-722 Potential Transformer, 2 BUSHINGS, NO FUSES 7200 V 120 V8-10Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Totally Integrated PowerApplication Engineering Services & TrainingGeneralTraining Center in Norcross, GeorgiaSiemens’ Power DistributionSolutions group can provideengineered solutions, not justgreat products.Here is a brief summary of what we do:▪ Power Quality & Reliability Analysis▪ Utilities Cost Allocation and Billing▪ Load Studies & Circuit Optimization▪ Demand & Power Factor Control▪ Equipment Monitoring & Control▪ Preventative Maintenance & Reporting▪ Design, Start-up & Commissioning▪ Factory certify power monitoringsystem operation▪ System drawings and devicedocumentation▪ Optimally configure each powermonitoring device (set-up, data logging,communications, event-capture,customized web-server pages, etc.)▪ Workstation software setup andconfiguration▪ Other customized work per customerrequirements (custom screenconfiguration, networks, alarming, etc.)▪ Technical support▪ Overview and thorough “hands-on”operator training on their ownsystems▪ Additional, higher-level training can betailored to suit individual customerneeds at Siemens’ training facility inNorcross, GA or on-siteSiemens PDS Application Engineers arepower monitoring experts experiencedin all industrial and commercial powerapplications. Our engineers are the bestqualified to ensure that power monitoringsystems are properly installed andcommissioned.For your specific needs, please consultfactory.Additionally, integration into Eaton/Cutler-Hammer, Square D PowerLogic, GeneralElectric, Rockwell, PML and many othersystems can be accomplished in anumber of ways. Please give us a callto discuss our specific requirements.8 POWERMONITORINGSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 8-11

NotesPOWERMONITORING88-12Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

9SPEEDFAX TM 2007-2008 TVSSContentsTPS General Information 9-2(For Internal Equipment Mounted, Consult Factory)External or Remote Mounted Unit SelectionTPS 9, TPS 10 9-3 – 9-4TPS 11, TPS 12 and TPS 16 9-5 – 9-79 TVSSResidential Commercial Industrial

9TVSSTVSS - Transient Voltage Surge SuppressorsTPS - Transient Protection SystemSiemens offers surge suppression productsto provide for multi–stage protection.Why have multi-stage protection? Highvoltage surges enter your systems as theresult of utility switching, lightning strikesand low voltage transients caused by internalequipment such as motors and compressors.All of these surges can destroysensitive electronic equipment.The Siemens TPS system has products tofit at every level of the electrical distributionsystem.INTEGRALFactory Installed Option▪ Pre-wired and Protection Ready▪ Priced & Configured with Specified Gear▪ Field Replaceable Design▪ UL ListedContact Factory for More Informationand Current Specifications.Lighting Panel Mounted Units - P1, P2& P3TPS 1Standard Features:▪ Retrofit capabilities▪ Direct Bus Connection▪ 120kA, 160kA & 240kA▪ LED Indication, Audible Alarm & DryContacts▪ All Modes of ProtectionSurge Counter & Remote Monitor Options.TPS 1 (SAD & SAD/MOV Hybrid)Standard Features:▪ Retrofit capabilities▪ Direct Bus Connection▪ 20kA, 90kA, 130kA & 170kA▪ LED Indication, Audible Alarm & DryContacts▪ All Modes of ProtectionSurge Counter & Remote Monitor Options.TPS 11Standard Features:▪ Breaker Fed (30-50 amp)▪ 120kA & 160kA (voltage sensitive)▪ LED Indication, Audible Alarm & DryContacts▪ All Modes of ProtectionSurge Counter & Remote Monitor Options.TPS 9Standard Features:▪ Breaker Fed (20 amp)▪ 80kA & 100kA▪ LED IndicationDistribution Panel and DistributionSection Switchboard Mounted UnitesP4 and P5 and front connecteddistribution section switchboardapplicationsTPS 5Standard Features:▪ Close Connection to Panel Bus▪ 160kA & 240kA▪ LED Indication, Audible Alarm & DryContacts▪ Integral Disconnect Switch▪ All Modes of ProtectionSurge Counter & Remote Monitor Options.Service Section and SwitchgearMounted Units - S1, S2, S3 or RCIIISwitchboardsTPS 6Standard Features:▪ Mounted in Customer InstrumentCompartment▪ 240kA, 320kA & 400kA▪ LED Indication, Audible Alarm & DryContacts▪ Integral Disconnect Switch▪ All Modes of ProtectionSurge Counter & Remote Monitor Options.Motor Control Mounted Units - 6 inchand 18 inch MCC Bucket ApplicationsTPS MCCStandard Features:▪ 6" Compact Design Installed in a Section▪ 160kA & 240kA▪ Racking Lever Disconnect▪ Audible Alarm▪ ModularEXTERNALFor Remote Wall Mounting Applications▪ Factory Quick Ship▪ Fully Assembled▪ EMI / RFI Filtering▪ UL ListedContact Factory for More Informationand Current Specifications.GeneralTPS 9Close Coupling to Distribution EquipmentStandard Features:▪ Breaker Fed (20 amp)▪ 80kA, 100kA, 120kA & 150kA (voltagesensitive)▪ LED Indication▪ NEMA 4X EnclosureFlush Mounting Option.TPS 10Close Coupling to Distribution EquipmentStandard Features:▪ Breaker Fed (30-50 amp)▪ 50kA▪ LED Indication▪ NEMA 4X Enclosure▪ All Modes of ProtectionAudible Alarm, Dry Contacts, RemoteMonitor & Flush Mounting Options.TPS 11Close Coupling to Distribution EquipmentStandard Features:▪ Breaker Fed (30-50 amp)▪ 80kA, 120kA & 160kA (voltage sensitive)▪ LED Indication▪ NEMA 4X Enclosure▪ All Modes of ProtectionAudible Alarm, Dry Contacts, RemoteMonitor & Flush Mounting Options.TPS 12Close Coupling to Service Entrance andDistribution EquipmentStandard Features:▪ Breaker Fed (30-50 amp)▪ 80kA, 120kA & 160kA (voltage sensitive)▪ LED Indication▪ NEMA 4X Enclosure▪ All Modes of ProtectionInternal Disconnect Switch, Surge Counter,Dual Surge Counter, Remote Monitor, 3, 4,4X & Flush Mounting Options.TPS 16Close Coupling to Distribution EquipmentStandard Features:▪ Breaker Fed (30-50 amp)▪ 120kA, 180kA & 240kA▪ 10 - Mode Protection Design▪ NEMA 4X EnclosureDry Contacts, Surge Counter, AudibleAlarm, & Remote Monitor Options.9-2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

TVSS - Transient Voltage Surge SuppressorsTPS 9 - Transient Protection SystemTPS 9Transient Protection System for SensitiveElectronic loads. Externally mounted toElectrical Distribution Equipment.SelectionFEATURES▪ UL 1449 Second Edition Revisioneffective Feb. 9, 2007 (aka UL 1449 Rev2.5). Designed and tested in accordancewith IEEE C62.41.1, C62.41.2, and C62.45▪ UL 1449 Rev 2.5 listed for 200kA SCCRapplications or below. In compliance withNEC Article 285.6▪ Modes of protection: L-N, L-G, and L-L▪ Multistage protection circuit▪ Fast acting 20mm MOV’s▪ NEMA4X Standard Enclosure▪ LED indicators for immediate statusmonitoring▪ Dimensions: 8" x 3" x 3"▪ Weight: 4 lbs.AVAILABLE OPTIONS▪ Flush MountORDERING INFORMATIONCatalog# TPS 09 Voltage Code Surge Current (kA) Options (*)A = 120/240V 1Ø 3W 080 L = Remote LEDB = 240/120V 3Ø 4W 100 D = Dry ContactC = 208Y/120V 3Ø 4W 120** F = Flush MountD = 240V 3Ø 3W 150** N = Noise FilterE = 480Y/277V 3Ø 4WT = Adds N-G (Gas Tube)F = 480V 3Ø 3WK = 380Y/220V 3Ø 4W* When an option is not selected, include a zero (0) in the option field**Only for voltage codes A and C9 TVSSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 9-3

TVSS - Transient Voltage Surge SuppressorsTPS - Transient Protection SystemTPS 10Transient Protection System for SensitiveElectronic loads. Externally mounted toElectrical Distribution Equipment.SelectionFEATURES▪ UL 1449 Second Edition Revisioneffective Feb. 9, 2007 (aka UL 1449 Rev2.5). Designed and tested in accordancewith IEEE C62.41.1, C62.41.2, and C62.45▪ Patented TranSafe Circuitry Designincorporating thermal cutouts and surgerated fuses▪ UL 1449 Rev 2.5 listed for 200kA SCCRapplications or below. In compliance withNEC Article 285.6▪ All modes of protection: L-N, L-G, L-L,& N-G▪ Multistage protection circuit▪ Fast acting 20mm MOV’s▪ NEMA 4X Standard Enclosure▪ LED indicators for immediate statusmonitoring▪ Dimensions: 6" x 6" x 4"▪ Weight: 8 lbs.AVAILABLE OPTIONS▪ Audible Alarm▪ Dry Contacts▪ Flush Mount▪ Remote MonitorORDERING INFORMATIONCatalog# TPS 10050 9TVSSVoltage Code Options (*)A = 120/240V 1Ø 3WR = Remote MonitorB = 240/120V 3Ø 4WD = Dry ContactsC = 208Y/120V 3Ø 4WF = Flush MountE = 480Y/277V 3Ø 4WA = Audible Alarm* When an option is not selected, include a zero (0) in the option field9-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

TVSS - Transient Voltage Surge SuppressorsTPS - Transient Protection SystemTPS 11Transient Protection System for SensitiveElectronic loads. Externally mounted toElectrical Distribution Equipment.SelectionFEATURES▪ UL 1449 Second Edition Revisioneffective Feb. 9, 2007 (aka UL 1449 Rev2.5). Designed and tested in accordancewith IEEE C62.41.1, C62.41.2, and C62.45▪ Patented TranSafe Circuitry Designincorporating thermal cutouts and surgerated fuses▪▪ UL 1449 Rev 2.5 listed for 200kA SCCRapplications or below. In compliance withNEC Article 285.6▪ All modes of protection: L-N, L-G, L-L,& N-G▪ Multistage protection circuit▪ Fast acting 20mm MOV’s▪ NEMA4X Standard Enclosure▪ LED indicators for immediate statusmonitoring▪ Dimensions: 6" x 6" x 4"▪ Weight : 8 lbs.AVAILABLE OPTIONS▪ Audible Alarm▪ Dry Contacts▪ Flush Mount▪ Remote MonitorORDERING INFORMATIONCatalog# TPS 11 Voltage Code Surge Current (kA) Options (*)A = 120/240V 1Ø 3W 080 R = Remote MonitorB = 240/120V 3Ø 4W 120** D = Dry ContactsC = 208Y/120V 3Ø 4W 160*** F = Flush MountD = 240V 3Ø 4WA = Audible AlarmE = 480Y/277V 3Ø 4WF = 480V 3Ø 3WG = 600V 3Ø 3WK = 380Y/220V 3Ø 4WL = 600Y/347V 3Ø 4W9 TVSS*When an option is not selected, include a zero (0) in the option field** Only for voltage codes A, B, C, E, K and L*** Only for voltage codes A, B, C, E and KSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 9-5

TVSS - Transient Voltage Surge SuppressorsTPS - Transient Protection SystemTPS 12Transient Protection System for SensitiveElectronic loads. Externally mounted toElectrical Distribution Equipment.SelectionFEATURES▪ UL 1449 Second Edition Revisioneffective Feb. 9, 2007 (aka UL 1449 Rev 2.5).Designed and tested in accordance with IEEEC62.41.1, C62.41.2, and C62.45▪ Patented TranSafe Circuitry Designincorporating thermal cutouts and surgerated fuses▪ UL 1449 Rev 2.5 listed for 200kA SCCRapplications or below. In compliance withNEC Article 285.6▪ All modes of protection: L-N, L-G, L-L, & N-G▪ Multistage protection circuit▪ Fast acting 40mm MOV’s▪ Standard monitoring: LED Indicators, AudibleAlarm, and Dry Contacts▪ NEMA 12 Standard Enclosure:Standard 10" x 10" x 5"W/Disconnect 12" x 12" x 5"Flushmount 12" x 12" x 6"Weight21 lbs.AVAILABLE OPTIONS▪ Surge Counter ▪ Internal Disconnect▪ Remote Monitor▪ Flush Mount▪ Dual Surge Counter▪ NEMA3R, 4, and 4X(may increaseenclosure size)ORDERING INFORMATIONCatalog# TPS 12 9TVSSVoltage Code Surge Current (kA) Options (*)A = 120/240V 1Ø 3W 120 R = Remote MonitorB = 240/120V 3Ø 4W 160 D = DisconnectC = 208Y/120V 3Ø 4W 240 03 = NEMA 3RD = 240V 3Ø 3W 04 = NEMA 4E = 480Y/277V 3Ø 4W4X = NEMA 4XF = 480V 3Ø 3W F = Flush MountG = 600V 3Ø 3WS = Surge CounterK = 380Y/220V 3Ø 4W 2 = Dual CounterL = 600Y/347V 3Ø 4W*When an option is not selected, include a zero (0) in the option field9-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

TVSS - Transient Voltage Surge SuppressorsTPS - Transient Protection SystemTPS 16Discrete 10-Mode Transient ProtectionSystem for Sensitive Electronic loads.Externally mounted to Electrical DistributionEquipment.SelectionFEATURES▪ UL 1449 Second Edition Revisioneffective Feb. 9, 2007 (aka UL 1449 Rev 2.5).Designed and tested in accordance with IEEEC62.41.1, C62.41.2, and C62.45▪ Patented TranSafe Circuitry Designincorporating thermal cutouts and surgerated fuses▪ UL 1449 Rev 2.5 listed for 200kA SCCRapplications or below. In compliance withNEC Article 285.6▪ All modes of protection: L-N, L-G, L-L,& N-G▪ Multistage protection circuit▪ Fast acting 20mm MOV’s▪ Standard monitoring: LED Indicators forimmediate status monitoring, RedService LED▪ NEMA 4X Standard Enclosure:Standard 10" x 8" x 6"Weight15 lbs.AVAILABLE OPTIONS▪ Remote Monitor ▪ Surge Counter▪ Dry Contact ▪ Audible AlarmORDERING INFORMATIONCatalog# TPS 16 Voltage Code Surge Current (kA) Options (*)A = 120/240V 1Ø 3W 120 R = Remote MonitorB = 240/120V 3Ø 4W 180 D = Dry ContactC = 208Y/120V 3Ø 4W 240 S = Surge Counter (&E = 480Y/277V 3Ø 4WSwitched Audible Alarm)K = 380Y/220V 3Ø 4WA = Audible Alarm9 TVSS*When an option is not selected, include a zero (0) in the option fieldSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 9-7

NotesTVSS99-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

10SPEEDFAX TM 2007-2008 PanelboardsContentsFeatures, Reference Guide & General Specifications 10-2 – 10-8Unassembled Panelboards 10-9 – 10-14Factory Assembled Panelboard Coding System 10-15Factory Assembled Panelboard Pricing 10-16Type P1 10-17 – 10-22Specifications 10-17Main Lug and Main Breaker 10-18Branch and Subfeed Breakers 10-19Modifications and Additions 10-20 – 10-21Enclosure Dimensions 10-22Type P2 10-23 – 10-32Specifications 10-23Enclosure Selection 10-24Alternate Main and Subfeed Breakers 10-25Branch Breakers 10-26Main Lug and Main Breaker 10-27Modifications and Additions 10-28 – 10-31Enclosure Dimensions 10-32Type P3 10-33 – 10-43Specifications 10-33Enclosure Selection 10-34Alternate Main, Branch and Subfeed Breakers 10-35 – 10-36Main Lug and Main Breaker 10-37 – 10-38Modifications and Additions 10-39 – 10-42Enclosure Dimensions 10-43Type P4 10-44 – 10-54Specifications 10-44Enclosure Selection 10-44 – 10-46Main Lug and Main Breaker 10-47Main Switch and Alternate Main Breakers 10-48Branch Devices – Circuit Breaker and Switch 10-49 – 10-50Modifications and Additions 10-51 – 10-53Enclosure Dimensions 10-54Type P5 10-55 – 10-65Specifications 10-55Enclosure Selection 10-56Main Lug and Main Breaker 10-57Alternate Main Breaker and Main Switch 10-58Branch Breakers 10-59Branch Switches 10-60Modifications and Additions 10-61 – 10-64Enclosure Dimensions 10-65Column Type Panelboards 10-66 – 10-69Telephone and Equipment Cabinets 10-70Panelboard Modifications and Additions 10-71 – 10-73Enclosures—Relay Cabinets, NEMA 4X 10-71Remote Switches—ASCO, LEN 10-71Circuit Breaker Modifications, Obsolete Kits 10-72Circuit Breaker Accessories & Panel Skirts 10-7310 PANELBOARDSResidential Commercial Industrial

PanelboardsIntroductionThe new generation of products from anoutstanding ancestry represents the highlevel of engineering innovation expectedfrom Siemens. Additional strength hasbeen added to an already rugged anddurable panelboard family. This producthas added flexibility and is easier to install.These newer designs also simplify wiringand reduce material requirements, savingadditional installation time.The newly defined “P Series” of panelsoffer a stepped approach to powerdistribution. Anchored at one end with theinnovative P1 that offers the industriesmost flexible designs to virtually eliminatethe impact of common mistakes like feeddirection, main lug versus main breaker.Adding distribution is also easy with theability to add feed-thru lugs. With aminimum number of enclosures (six sizes),the P1 fits the majority of the lighting panelneeds in a cost-effective package.The next step in the series and withsubsequent steps, offers increasedcapacity and options. The P2 offersmaximum flexibility and options to fitthe most demanding specifications.The P3 is another flexible and innovativepanel. Sized more like a lighting panel forthose tight areas, the P3 panel packsthe power of a distribution panel.The P4 offers a mid-sized distributionpanel and allows fusible as well as circuitbreaker branch and main devices.The P5 anchors the other end of the series.Larger fusible and circuit breaker branchand main devices give maximum powerto the distribution system.Siemens also offers a number of specialtypanels like column panels. Don’t see yourrequirement met? Ask a Siemensrepresentative to tell you about ourcustom capabilities.The lighting panel design still features theFas-Latch trim that is popular with installers,the jacking screw system that permitsadjustments even after wiring has beeninstalled, and other features such asexclusive split neutral. Many panelboardshave the capability of mixing and matchingbreakers of different sizes and ratings – orchanging from main lug to main breaker,or adding subfeed breakers withoutchanging box size. Other models accepta wide range of fuse types, includingSiemens exclusive Vacu-Break ®technology.GeneralFeatures OverviewSiemens offers a complete line of lighting,and power distribution panelboards. Atthe heart of the product line is theextensive research and technology foundamong Siemens circuit protection devices– both fusible switches and molded casecircuit breakers.10PANELBOARDSKey Panelboard Features P1 P2 P3 P4 P5Lighting And Appliance Applications • • • • •Power Panelboard Applications — • • • •Convertible From Top Feed To Bottom Feed Or Vice Versa • — — — —Change From Main Lug To Main Breaker OrAdd Subfeed Without Changing Enclosure Size• Standard KOs available on P1 and P2 — 5.75" deep X 20" wideboxes and P3 7.75" deep X 24" wide boxes.• — — — —Space-Saving, Horizontally Mounted Main Breaker Up To 250 Amps Up To 250 Amps Up To 250 Amps • •Short-Circuit Rating Label Giving Performance Level • • • • •Standard Aluminum Ground AssemblyBlank End-Walls Standard ••••••••••Bolted Current-Carrying Parts • • • • •Split Neutral • • • • •Connection Accessible From FrontScrew-Type Mechanical Lugs••••••••••Time-Reducing Wing Nuts To Secure Interior Without Tools • • • • •Main and Branch Devices Connected WithCase-Hardened Hardware• • • • •Flush Lock, Concealed Door Hinges/Trim Screws • • • — —Symmetrical Interior Mounting StudsTo Eliminate Upside-Down Mounting of Box• • • • •Interior Height Adjustment For Flush Applications • • •Mix and Match Fusible Switch Circuit Breaker Capability — — —••••Shallow Depth (Standard) 5.75" 5.75" 7.75" 10.00" 12.75"Accepts A Wide Range Of Fuse Types — — — • •Accepts Vacu-Break Fusible Switch — — — • •Accepts A Wide Range Of Circuit Breakers — • • • •Accepts ACCESS Communications Tie-In — • • • •Optional Compression Lugs • • • • • Panelboards equipped with Siemens Sensitrip® circuitbreakers or Power Meters can be integrated intoSiemens ACCESS electrical monitoring systems.10-2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

PanelboardsFeatures / BenefitsReferenceThe standard Siemens P1 panelboard has some unique features that make it easier to design for an engineer, easier toreconfigure in the field for a contractor, and easier to upgrade and maintain for the Owner. The P1 is the smallest panel in theSiemens lineup, with bus sizes up to 400A. What makes it different is it’s split neutral design and it’s open ended bus. In theSiemens panel, instead of the common single neutral bus on one end, we have a neutral bus on both sides that is cross-bussed.This makes branch wiring simpler and cleaner – the lead lengths for line and neutral can now be made the same, creating moreroom and a neater installation. It also allows access to both ends of the bus as a standard feature – this provides the flexibility tomake changes in the field, even if it wasn’t part of the original configuration.MAIN BREAKER or SUB-FEED BREAKERMAIN LUGS or FEED-THROUGH LUGSINTEGRAL BUS MOUNTED TVSSThe following can be done to a standard P1 panelboard in the field with no modifications:▪ Change from top fed to bottom fed▪ Add feed-through lugs▪ Add an Integral bus-mounted TVSS▪ Add a sub feed breaker up to 250 amps▪ Change from Main Lugs to Main Breaker▪ Change from Main Breaker to Main Lugs▪ Panel may have up to two ground assemblies. Options are standard aluminum, copper, insulated or isolated aluminum orcopper. Mounting provisions in opposing corners of the box are standard. Any of these options may be added afterinstallation.10 PANELBOARDSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-3

PanelboardsTrimOptionsStandard Trim (FAS-Latch)Door in Door FrontPANELBOARDS10Hinged Front10-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

PanelboardsSpecial EnclosuresOptionsNEMA 3R EnclosuresNEMA 4X EnclosuresPanel Family Portrait10 PANELBOARDS“P” Series Panelboard Family for Lighting and Appliance and Distribution Panel ApplicationsSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-5

10PANELBOARDSPanelboardsGeneral SpecificationsClass CTL PanelboardsClass CTL panelboards incorporatephysical features which, in conjunctionwith the physical size, configuration, orother means provided in Class CTL circuitbreakers, are designed to prevent theinstallation of more over currentprotective poles than that number forwhich the device is designed and rated,per UL 67 and National Electrical Code(NEC) NFPA70.Service Entrance EquipmentWhen a panelboard is used as serviceentrance equipment, it must be locatednear the point of entrance of buildingsupply conductors. In a main lugs onlypanel, the number of breakersor switches directly connected to themain bus must be limited to six. In apanel having a main breaker or mainswitch, the number of circuits are notlimited except as may be provided underother panelboard requirements, i.e.,lighting and appliance branch circuitpanelboards. Also, panels must includea connector for bonding and groundingneutral conductor.Panelboard Code Data42-Circuit Rule: NEC Paragraph 408.34defines a lighting and appliance branchcircuit panelboard as one having morethan 10 percent of its over currentdevices rated 30 amperes or less, forwhich neutral connectors are provided.NEC paragraph 408.35 states that notmore than 42 over current devices (otherthan those provided in the mains) of alighting and appliance branch-circuitpanelboard shall be installed in any onecabinet. For the purpose of this article,a two pole circuit breaker shall beconsidered two over current devices;a three pole circuit breaker shall beconsidered three over current devices.(NEC 408.34 and 408.35 do not apply topanelboards feeding and communicationcircuits. Panelboards for this applicationmust be so marked.)Integrated Equipment Short CircuitRatingThe term “Integrated Equipment ShortCircuit Rating” refers to the applicationof series connected circuit breakers incombination that allows some breakersto have lower individual interruptingratings than the available fault current.This is permitted as long as the seriescombination has been tested and certifiedby UL.StandardsNEC: 2005NEMA: PB1UL: 67 and 50. Listed by Underwriter’sLaboratories, Inc., under “Panelboards”File #E2269, and #E4016. MeetsFederal Specification W-P-115c.Wire ConnectorsStandard wire connectors in Siemenspanels are suitable for copper oraluminum cables rated 60/75 degree.Copper main lugs are price added optionfor most panel types and some CircuitBreakers (check with Siemens sales foravailability). It should be noted that mostcopper lugs will only accept coppercables. Some applications, 100% rateddevices in particular, require that thecable and connectors be rated 90 degreebut are sized to the 75 degree tables.GroundsStandard ground connectors are alsosuitable for copper or aluminum wire.Ground connector assemblies (EGK, IGK)have (7) 1/0 max. and (15) #6 max.connections. The 1/0 holes are capableof connecting up (3) #10 max. wires.Copper ground assemblies (ECGK, ICGK)are rated for copper wire only andhave the same wiring capacity as theAl/Cu connectors.Neutral ConnectorsStandard neutrals, like standardmain lugs, are also rated for copperor aluminum wire. The neutral crossbar material follows the selection bus.Copper neutral lugs are rated for coppercable only and available as a price addedoption.Panel MountingWallWallShown mounted in wallShown mounted on surface of wallSpace Required for Mounting ofDouble PanelsUse two or more panelboards withfeed-thru or subfeed lugs when:1. Lighting and appliance panelboardsare required with more than 42 circuits.2. More circuit mounting space isrequired than is provided in the largestbox size.Feed-Thru LugsGeneralSubfeed Lugs or Double LugsFeed-thru lugs are mounted at theopposite end of the main bus from themain lugs or main breaker and are usedto connect two or more panelboards tothe incoming feeder. The feeder cablesare brought into Panelboard 1 andconnected to the main lugs or mainbreaker. Cables interconnecting thetwo panelboards are connected to thefeed-thru lugs in Panelboard1 and arecarried over the main lugs in Panelboard2. This arrangement could be reversedwith the main lugs located at the topand the feed-thru lugs at the bottomof the panel. Subfeed lugs are mounteddirectly beside the main incoming lugsand are used to connect two or morepanelboards to the incoming feeder.The feeder cables are brought intoPanelboard 1 and connected to the mainlugs. Another set of cables that are thesame size are connected to the subfeedlugs of Panelboard 1 and are carried overthe main lugs of Panelboard 2.10-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

PanelboardsGeneral SpecificationsBussing SequenceInteriors are designed to accommodatetop or bottom feed. Regardless ofwhich is specified, the uppermost poleis always on “A” phase; the secondpole down is always on “B” phase, andthe third pole down is always on ”C”phase (assuming 3Ø panel).As standard, branch breakers shall bemounted at the top of the panel with“spaces” at the bottom, regardless ofthe direction panel is fed.GeneralAll breakers have bolted connectionsexcept plug-in type. The panel designprovides bracing up to 200,000A IR ULshort circuit rating. Case-hardened, highperformance, thread rolling screws areused on branch bus.Circuit Breaker LightingPanel Type P1Circuit Breaker Lighting orDistribution Panel Types P2/P3Circuit Breaker DistributionPanel Type P4/P5Fusible Switch DistributionPanel Type P4/P5Panelboard RatingsDescription P1 P2 P3 P4 P5Max. Voltage 480Y/277V AC Max. 600V AC Max. 600V AC Max. 600V AC Max. 600V AC Max.250V DC Max. 500V DC Max. 500V DC Max. 500V DC Max. 500V DC Max.System 1-Phase, 2-Wire 1-Phase, 2-Wire 1-Phase, 2-Wire 1-Phase, 3-Wire 1-Phase, 3-Wire1-Phase, 3-Wire 1-Phase, 3-Wire 1-Phase, 3-Wire 3-Phase, 4-Wire 3-Phase, 4-Wire3-Phase, 3-Wire 3-Phase, 3-Wire 3-Phase, 4-Wire 3-Phase, 3-Wire 3-Phase, 3-Wire3-Phase, 4-Wire 3-Phase, 4-Wire 3-Phase, 3-WireMain Lugs 125A-400A 125A-600A 250A-800A 400A-1200A 800A-1200AMain Breaker 100A-400A 100A-600A 225A-600A 400A-800A 800A-1200AMain Switch — — — 100A-200A 400A-1200ACircuits 18, 30, 42 18, 30, 42, 54 — — —Branch Ratings 15-125A 15-225A 15-600A15-600A C/B 15-1200A C/B30-200A Fusible 30-1200 FusibleBranch BL, BLH, HBL, BQD, BL, BLH, HBL, BQD, BL, BLH, HBL, BQD, NGB, All 15-600A All 15-1200A C/BDisconnect NGB , BQD6, BLE, NGB, NEB, HEB, BQD6, NEB, HEB, BQD6, QJ2, Breakers and MG at 30A-200A VB SwitchesDevices BLEH, BLF, BLHF, BAF, QJ2, HQJ2, QJ2H, HQJ2, QJ2H, HQJ2H , 800 Amps, 30-200A 400-1200A HCPBAFH, BGL HQJ2H , ED4, HED4, ED6, ED4, HED4, ED6, Fusible Switches SwitchesHHED6, BLE, BLEH, BLF, HHED6, BLE, BLEH, BLF,BLHF, BAF, BAFH, BGL BLHF, BAF, BAFH, BGLSubfeed NGB, ED4, ED6, HED4, JD6, JXD6, HJD6, JD6, JXD6, HJD6, — —Circuit HED6, QJ2, QJH2, HJXD6, FD6, HFD6, FD6, HFD6, FXD6,Breakers QJ2-H, FXD6, FD6, FXD6, HFXD6 HFXD6 HFD6, HFXD6 Enclosure 32, 38, 44 @250A 26, 32, 38, 44, 50, 56, 56, 62, 68, 74, 80 60, 75, 90 60, 75, 90Heights (813, 965, 1118) 62, 68, 74 (1422-2032) (1524, 1905, 2286) (1524, 1905, 2286)Inches – (mm) 56, 62, 68 @400A (660-1880)(1422, 1575, 1727)Standard Fas-Latch – 1 Piece Fas-Latch – 1 Piece Fas-Latch – 1 Piece Four Piece Four Piece Trims Surface or Flush Surface or Flush Surface or Flush Surface Surface Functional pricing is based on circuits shown.However, the panel can be figured with less circuits. P1 can have (1) subfeed breaker. P2 and P3 can haveup to (2) FD subfeed breakers. JD and FD breakers are mounted vertical. Limitationsapply. Trim ring provided for flush applications. A maximum of (4) QJ breaker may be mounted in a P2Panel and are single mounted. A maximum of (6) QJ breakers may be mounted in a P3panel and are twin mounted. P1 panels with NGB breakers are limited to NGBbranch devices only. BL and BQD frames may not bemixed in this panel type.10 PANELBOARDSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-7

PanelboardsGeneral SpecificationsTypical Panelboard ModificationsLighting and Distribution PanelboardsDistribution PanelboardsDescription P1 P2 P3 P4 P5GeneralBoxType 3R/12 • • • • •Type 4, 4X • • • • •Drip Proof • • • • •Drip Proof Hood Only • • • • •Sealed Box • • • • •Gasketed Trim • • • • •Wider Box • • • • •Deeper Box — • • • •FrontHinged Front • • • • •Door-in-Door Front • • • • •Common Front • • • — —Split Door • • • — —Special Locks • • • • •Nameplate • • • • •InteriorAluminum Equipment Ground Bar Standard Standard Standard Standard StandardCopper Equipment Ground Bar • • • • •Insulated Equipment Ground • • • • •Subfeed Lugs — • • • •Feed-Thru Lugs • • • • •Split Bus — • • • •Compression Lugs • • • • •Copper Lugs • • • • •200% NeutralCheck Plant For Check Plant For• • •AvailabilityAvailabilityTemperature Rated - Aluminum Standard Standard Standard Standard StandardTemp. Rise Over Ambient - Copper • • • • •750 Ampere / in. - Aluminum — • • • •1000 Ampere / in. - Copper — • • • •Tin Std./ Tin Std./ Silver Std./ Silver Std./Copper Plating - Silver or TinTinSilver Optional Silver Optional Tin Optional Tin OptionalRemote Control Switches External Mounted • • • •Time Clocks External Mounted • • • •Circuit Breaker Shunt Trips • • • • •R, J and T Fuse Clips — — — • • All aluminum bus is tin-plated.• Available as an option.UL Fuse Classes InterruptingClass Amperes Volts Ratings (kA) l 2 t, l i CircuitsH 1-600 250 and 600V or less AC 10 — Less than 10,000A AvailableK5 1-600 250 and 600V or less AC 100 l•t – RK5 up to 100A, Feeder circuitsl i – RK5 up to 100AJ 1-600 600V or less 200 l•t – Low, l i – Low Feeder circuits (motor load small %)RK1 1/10-600 600V or less and 250V or less 200 l•t – Slightly > J, l i – Slightly > J Feeder circuits (motor load small %)RK5 1/10-600 600V or less and 250V or less 200 l•t – > RK-1, l i – > RK-1 Motor starting currents a factorT 1-800, 300 and 600V or less AC To 200 l•t – Low, l i – Low Non-Motor loads1-1200L 601-1200 600V or less 200 l•t – Low, l i – Low Mains, feeder circuits Per UL 67. Fuses do not prohibit the use of Class H type fuse in switch.PANELBOARDS1010-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

PanelboardsUnassembledCatalog Numbering SystemType P1 unassembled panelboards arecompletely convertible from main lugto main breaker and vice-versa.Additionally feed-thru lugs,or a subfeed circuit breaker up to400 amperes can be added withoutincreasing the box height. Follow theseeasy steps to select and price the properP1 panel from stock:1. Compute total number of poles todetermine interior catalog number.2. List catalog number and price ofinterior, box and front.3. Select main lug kit or main breakerkit from appropriate tables. Note:Main/Subfeed Breaker mounting kitsmay be ordered with or withoutbreakers included, see page 10-11and 10-12 for selection.Reference4. List required branch circuitbreakers and filler plates to coverany unused positions.5. Select any modificationsor accessories.6. Compute total list price.P 1 X 1 8 M C 2 5 0 A 1. P12. Voltage and SystemX = 208Y/120, 3-Phase 4-WireA = 120/240V, 1-Phase 3-WireE = 480Y/277V, 3-Phase 4-Wire3, 4. Circuit – 18, 30, 425, 6. Mains MC = Convertible mainsSelect Main Lug Kit or Breaker Mounting Kit from page 10-11—10-12Select Main Breaker Kit from page 10-11—10-127, 8, 9. Amperage – 400A max10. Main Bus Material A = AluminumC = CopperNote:Standard bussing in P1 panels is tin plated for aluminum and copper.Standard bus is temperature rated to the maximum amperage in the panel.Branch BreakersPanel Type Voltage (Max.) Breaker Type Speedfax Page240 BI, BLH, HBL, BQDP1 480/277 BQD See section 6600/347 BQD10 PANELBOARDS Consult sales office for availability of CSA.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-9

PanelboardsDistributor StockPricing An Unassembled Panel400A Max. — 20" Wide x 5.75" Deep1. Choose the appropriate Interior fromthe table below.2. Choose and price the Main Device:Main Lugs from pages 10-11, MainBreaker Kit from page 10-13 and MainBreakers from Section 6.3. Choose and price Branch Breakers.BL, BQD and NGB breakers fromSection 6.4. Choose and price Feed-Thru Lugs orSubfeed Breaker Feed-Thru Lugs frompage 10-11, Subfeed Breaker Kit frompage 10-11, and Subfeed Breaker fromSection 6.Type P1 Unassembled PanelboardsSelectionConvertible Mains — 1-Phase, 3-Wire 120/240VInteriors Only–Less Branch Breakers Boxes FrontsTotal AmperesList Rating Max. No List Height List List ListPrice $ Mains of Poles Interiors Price $ (inches) Type 1 Price $ Type 3R/12 Price $ Surface Flush Price $836.50 18 P1A18MC250A 630.00 32 B32 52.00 WP32 1690.00 S32B F32B 262.00975.50 250 30 P1A30MC250A 787.00 38 B38 52.00 WP38 1690.00 S38B F38B 262.001201.50 42 P1A42MC250A 1042.00 44 B44 52.00 WP44 1690.00 S44B F44B 262.001303.00 18 P1A18MC400A 979.00 56 B56 107.00 WP56 1841.00 S56B F56B 384.001443.00 400 30 P1A30MC400A 1138.00 62 B62 107.00 WP62 1841.00 S62B F62B 384.001669.00 42 P1A42MC400A 1393.00 68 B68 107.00 WP68 1841.00 S68B F68B 384.00893.50 18 P1A18MC250C 694.00 32 B32 52.00 WP32 1690.00 S32B F32B 262.001066.50 250 30 P1A30MC250C 889.00 38 B38 52.00 WP38 1690.00 S38B F38B 262.001310.50 42 P1A42MC250C 1165.00 44 B44 52.00 WP44 1690.00 S44B F44B 262.001389.00 18 P1A18MC400C 1077.00 56 B56 107.00 WP56 1841.00 S56B F56B 384.001562.00 400 30 P1A30MC400C 1272.00 62 B62 107.00 WP62 1841.00 S62B F62B 384.001806.00 42 P1A42MC400C 1548.00 68 B68 107.00 WP68 1841.00 S68B F68B 384.00Convertible Mains — 3-Phase, 4-Wire208Y/120V836.50 18 P1X18MC250A 630.00 32 B32 52.00 WP32 1690.00 S32B F32B 262.001068.50 250 30 P1X30MC250A 891.00 38 B38 52.00 WP38 1690.00 S38B F38B 262.001301.50 42 P1X42MC250A 1154.00 44 B44 52.00 WP44 1690.00 S44B F44B 262.001373.00 18 P1X18MC400A 1059.00 56 B56 107.00 WP56 1841.00 S56B F56B 384.001604.00 400 30 P1X30MC400A 1320.00 62 B62 107.00 WP62 1841.00 S62B F62B 384.001838.00 42 P1X42MC400A 1584.00 68 B68 107.00 WP68 1841.00 S68B F68B 384.00896.50 18 P1X18MC250C 697.00 32 B32 52.00 WP32 1690.00 S32B F32B 262.001152.50 250 30 P1X30MC250C 987.00 38 B38 52.00 WP38 1690.00 S38B F38B 262.001402.50 42 P1X42MC250C 1269.00 44 B44 52.00 WP44 1690.00 S44B F44B 262.001489.00 18 P1X18MC400C 1190.00 56 B56 107.00 WP56 1841.00 S56B F56B 384.001743.00 400 30 P1X30MC400C 1477.00 62 B62 107.00 WP62 1841.00 S62B F62B 384.001994.00 42 P1X42MC400C 1760.00 68 B68 107.00 WP68 1841.00 S68B F68B 384.0010PANELBOARDSConvertible Mains — 3-Phase, 4-Wire480Y/277V836.50 18 P1E18MC250A 630.00 32 B32 52.00 WP32 1690.00 S32B F32B 262.001068.50 250 30 P1E30MC250A 891.00 38 B38 52.00 WP38 1690.00 S38B F38B 262.001301.50 42 P1E42MC250A 1154.00 44 B44 52.00 WP44 1690.00 S44B F44B 262.001373.00 18 P1E18MC400A 1059.00 46 B56 107.00 WP56 1841.00 S56B F56B 384.001743.00 400 30 P1E30MC400A 1320.00 62 B62 107.00 WP62 1841.00 S62B F62B 384.001838.00 42 P1E42MC400A 1584.00 68 B68 107.00 WP68 1841.00 S68B F68B 384.00896.50 18 P1E18MC250C 697.00 32 B32 52.00 WP32 1690.00 S32B F32B 262.001152.50 250 30 P1E30MC250C 987.00 38 B38 52.00 WP38 1690.00 S38B F38B 262.001402.50 42 P1E42MC250C 1269.00 44 B44 52.00 WP44 1690.00 S44B F44B 262.001489.00 18 P1E18MC400C 1190.00 56 B56 107.00 WP56 1841.00 S56B F56B 384.001743.00 400 30 P1E30MC400C 1477.00 62 B62 107.00 WP62 1841.00 S62B F62B 384.001994.00 42 P1E42MC400C 1760.00 68 B68 107.00 WP68 1841.00 S68B F68B 384.00 Front included in NEMA 3R Box.10-10Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule UNPB

PanelboardsDistributor StockType P1 PanelboardsLug Kits — Main or Feed ThruAmpere Catalog ListRating Material Wire Range Service Number Price $(1) #6 AWG–350 kcmil1-Phase MLKA1 208.00Cu or AlAI(1) #6 AWG–350 kcmil3-Phase MLKA3 262.00Cu or Al250Cu(1) #6 AWG–350 kcmilCu or Al1-Phase MLKC1 388.00(1) #6 AWG–350 kcmilCu or Al3-Phase MLKC3 500.00400AlCuCopper Neutral Lug Kits — 250A(2) 3/0 250 or 1-Phase 4MLKA1 791.00(1) 600 kcmil 3-Phase 4MLKA3 879.00(2) 3/0 250 or 1-Phase 4MLKC1 1059.00(1) 600 kcmil 3-Phase 4MLKC3 1307.00Number Catalog Listof Circuits Description Number Price $1830422 Branch Neutral Strips, 1 Main Neutral Lug,CNLK18 208.00Hardware2 Branch Neutral Strips, 1 Main Neutral Lug,CNLK30 229.00Hardware2 Branch Neutral Strips, 1 Main Neutral Lug,CNLK42 251.00Hardware200% Neutral Lug Kits/250A1830422 Branch Neutral Strips, 2 Main Neutral Lug,2NLK18 310.00Hardware2 Branch Neutral Strips, 2 Main Neutral Lug,2NLK30 330.00Hardware2 Branch Neutral Strips, 2 Main Neutral Lug,2NLK42 351.00Hardware200% Neutral Lug Kits/400A and 600A18 42NLK18 487.002 Branch Neutral Strips, 4 Main Neutral Lug,3042NLK30 487.00Hardware4242NLK42 487.00Type P1 PanelboardsSelectionBreaker Mounting Kits 250A Max. — Main or Subfeed w/o BreakerAmpere Catalog ListRating Breaker Types Service Number Price $100A BQD 3-Phase MBKBC3 586.00100A125A125A225ABL, BLH, HBLNGBED4, ED6, HED4, HED6QJ2, QJH2, QJ2-H1-Phase MBKBL1 208.003-Phase MBKBL3 586.001-Phase MBKNB1 498.003-Phase MBKNB3 1063.001-Phase MBKED1 498.003-Phase MBKED3 1063.001-Phase MBKQJ1 498.003-Phase MBKQJ3 1063.001-Phase MBKFD1 797.00250A FXD6, FD6, HFD63-Phase MBKFD3 939.00400A JXD2, JD6, JXD6, 1-Phase MBKJD1 2381.00HJD6, HJXD6 3-Phase MBKJD3 2755.00 400 amp kit is for main—only not allowed for subfeed breaker.MBKQJ3Type P1, P2, and P3 PanelboardsMiscellaneous Parts and AccessoriesCatalogListNumber Description Price $EGK Al Ground Bus 44 Connections 18.00BK1 Bonding kit for 250A max. 20.00and all P1 panelsBK2 Bonding kit for S1/S2 400 & 600 20.00BK3 Bonding kit 20.00IMK1 Interior Adjusting Kit 13.0011-1824-01 Directory Card Holder 7.0012-1110-01 Directory Card 3.0011-1056-01 NEMA Instruction Book 3.00NBK03 Number Strips 1–42 9.00NBK04 Number Strips 43–84 9.00NBK05 Number Strips 85–126 8.00NBK06 Number Strips 127–168 8.00ECGK Cu Ground Bus 44 Connections 21.00IGK Insulated Al Ground Bus 57.00ICGK Insulated Cu Ground Bus 67.00EWK1End Wall Kit with Knockouts(20" W x 5.75" DP) 33.00EWK2End Wall Kit with Knockouts(24" W x 7.75" DP) 33.00QF3 Filler Plate 2.80EBF1 NEB/HEB Filler Plate 3.00MBKFD310 PANELBOARDSDiscount Schedule UNPB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-11

PanelboardsPanelboard Replacement, Modification, and AdditionsS1/S2 Panels—All the P1 panel kits for 250 amp and belowpanels will work for 250 amp maximum S1/S2 panels.400/600 Amp S1/S2 and All SE PanelsLug Kits — Main or Feed ThruAmpere Catalog ListRating Material Wire Range Service Number Price $125A/250A Al/Cu (2) 1/0–250 kcmil 1-Phase MLKA1 208.00125A/250A Al/Cu (2) 1/0–250 kcmil 3-Phase MLKA3 262.00400A/600A400A/600AAl/CuAl/Cu(2) #4–250 kcmil or(1) 3/0–500 kcmil(2) #4–250 kcmil or(1) 3/0–500 kcmil1-Phase SMLKA1 791.003-Phase SMLKA3 879.00SelectionBreaker Mounting KitsAmpere Catalog ListRating Breaker Types Service Number Price $125A ED2, ED4, ED6, HED4, HED6, HHED6 1-Phase SMBKED1 670.00225A ED2, ED4, ED6, HED4, HED6, HHED6 3-Phase SMBKED3 1273.00225A QJ2, HQJ2, HQJ2H 1-Phase SMBKQJ1 1786.00225A QJ2, HQJ2, HQJ2H 3-Phase SMBKQJ3 2007.00250A FXD6, FD6, HFXD6, HFD6 1-Phase SMBKFD1 955.00250A FXD6, FD6, HFXD6, HFD6 3-Phase SMBKFD3 1128.00400A JD6, JXD6, HJD6, HJXD6 1-Phase SMBKJD1 2381.00400A JD6, JXD6, HJD6, HJXD6 3-Phase SMBKJD3 2755.00600A LD6, LXD6, HLD6, HLXD6 1-Phase SMBKLD1 2533.00600A LD6, LXD6, HLD6, HLXD6 3-Phase SMBKLD3 2854.00Neutral KitsAmpere Catalog ListRating Description Number Price $250A max. 30/42 circuit 200% neutral kit 2NLK2 464.00400/600A max. 42 circuit 200% neutral kit 2NLK1 487.00Other applications:For P4/S4 and 10" deep SPP panels see page 10-50 for branch breaker mounting kits.For P5/S5 and 12.75" deep SPP panels see page 10-61 for branch breaker mounting kits.For P4/F1 and 10" deep FPP panels see page 10-50 for branch fusible switch mounting kits.For P5/F2 and 12.75" deep FPP panels see page 10-61 for branch fusible switch mounting kits.For Series 5, Series 6, CDP6 and VB 6 panels as well as FC20, FCI, FCII, SB1, SB2 and SB3distribution switchboards, see page 12-32 for branch device mounting kits.PANELBOARDS10 QJ mounting kit is for subfeed breakers only, not main breaker.The kit contains mountings for (2) breakers.10-12Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule UNPB

Sentron ® PanelboardsWarehouse Stock/UnassembledMain Breaker Mounting Kits w/Breakers for P1 panelsCatalogRatings ListNumber Description 240V 480V Price $MBKED3100 Kit w/3-pole ED4 100A breaker 65KA 18KA 1869.00MBKED3125 Kit w/3-pole ED4 125A breaker 65KA 18KA 3197.00MBKQJ1125 Kit w/2-pole QJ2 125A breaker 10KA — 1929.00MBKQJ1150 Kit w/2-pole QJ2 150A breaker 10KA — 1929.00MBKQJ1175 Kit w/2-pole QJ2 175A breaker 10KA — 1929.00MBKQJ1200 Kit w/2-pole QJ2 200A breaker 10KA — 1929.00MBKQJ1225 Kit w/2-pole QJ2 225A breaker 10KA — 1929.00MBKQJ3125 Kit w/3-pole QJ2 125A breaker 10KA — 2757.00MBKQJ3150 Kit w/3-pole QJ2 150A breaker 10KA — 2757.00MBKQJ3175 Kit w/3-pole QJ2 175A breaker 10KA — 2757.00MBKQJ3200 Kit w/3-pole QJ2 200A breaker 10KA — 2757.00MBKQJ3225 Kit w/3-pole QJ2 225A breaker 10KA — 2757.00MBKQJ1125H Kit w/2-pole QJ2H 125A breaker 42KA — 2115.00MBKQJ1150H Kit w/2-pole QJ2H 150A breaker 42KA — 2115.00MBKQJ1175H Kit w/2-pole QJ2H 175A breaker 42KA — 2115.00MBKQJ1200H Kit w/2-pole QJ2H 200A breaker 42KA — 2115.00MBKQJ1225H Kit w/2-pole QJ2H 225A breaker 42KA — 2115.00MBKQJ3125H Kit w/3-pole QJ2H 125A breaker 42KA — 3144.00MBKQJ3150H Kit w/3-pole QJ2H 150A breaker 42KA — 3144.00MBKQJ3175H Kit w/3-pole QJ2H 175A breaker 42KA — 3144.00MBKQJ3200H Kit w/3-pole QJ2H 200A breaker 42KA — 3144.00MBKQJ3225H Kit w/3-pole QJ2H 225A breaker 42KA — 3144.00MBKFD3150 Kit w/3-pole FXD6 150A breaker 65KA 35KA 3301.00MBKFD3175 Kit w/3-pole FXD6 175A breaker 65KA 35KA 3301.00MBKFD3200 Kit w/3-pole FXD6 200A breaker 65KA 35KA 3301.00MBKFD3225 Kit w/3-pole FXD6 225A breaker 65KA 35KA 3301.00MBKFD3250 Kit w/3-pole FXD6 250A breaker 65KA 35KA 4612.00MBKJD1300 Kit w/2-pole JXD6 300A breaker 65KA — 4534.00MBKJD3300 Kit w/3-pole JXD6 300A breaker 65KA 35KA 5974.00MBKJD1400 Kit w/2-pole JXD6 400A breaker 65KA 35KA 4534.00MBKJD3400 Kit w/3-pole JXD6 400A breaker 65KA 35KA 5974.00Branch Breakers Selection for P1Selection Guide1. Select breaker type.2. Select required amperage.3. Select number of poles.4. Select branch breakercatalog numbers.AFCI Arc Fault Circuit InterrupterSelectionInterrupting Ratings (kA)RMS Symmetrical AmperesBreaker Ampere CatalogVolts ACType Rating Number 120 120/240 240BAF 15 B115AF 10 — —1-Pole 20 B120AF 10 — —BAFH 15 B115AFH 22 — —1-Pole 20 B120AFH 22 — —Switching Neutrals 5. Select ground bar and fillerplates. (See replacementparts & accessories onPage 10-11.)Interrupting Ratings (kA)RMS Symmetrical AmperesBreaker Ampere CatalogVolts ACType Rating Number 120 120/240 240BG 15 BG215■ 10 — —2-Wire 20 BG220■ 10 — —Common Trip 30 BG230■ 10 — —BG 15 BG315■ — 10 —3-Wire 20 BG320■ — 10 —Common Trip 30 BG330■ — 10 —10 PANELBOARDS 400 Amp Kit used as Main only. And for top feedapplications only.Discount Schedule UNPB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-13

10PANELBOARDSSentron ® PanelboardsWarehouse Stock/UnassembledBranch Breakers Selection for P1Selection Guide1. Select breaker type.2. Select required amperage.3. Select number of poles.4. Select branch breaker catalognumbers.BL Branch Breakers – 10,000A IRAmp 1-Pole 2-Pole 2-Pole 3-PoleRating 120/240V 120/240V 240V 240V15 B115 B215 B215R B31520 B120 B220 B220R B32025 B125 B225 B225R B32530 B130 B230 B230R B33035 B135 B235 B235R B33540 B140 B240 B240R B34045 B145 B245 B245R B34550 B150 B250 B250R B35055 B155 — — —60 B160 B260 B260R B36070 B170 B270 B270R B37080 — B280 B280R B38090 — B290 B290R B390100 — B2100 B2100R B3100110 — B2110 — —125 — B2125 — —HBL Branch Breakers – 65,000A IRAmp 1-Pole 2-Pole 3-PoleRating 120/240V 120/240V 240V15 B115HH B215HH B315HH20 B120HH B220HH B320HH30 B130HH B230HH B330HH40 B140HH B240HH B340HH50 B150HH B250HH B350HH60 — B260HH B360HH70 — B270HH B370HH80 — B280HH B380HH90 — B290HH B390HH100 — B2100HH B3100HHGFCI Personnel Protection (5MA)Interrupting Ratings (kA)RMS Symmetrical AmperesBreaker Ampere CatalogVolts ACType Rating Number 120 120/240 240BLF 15 BF115 10 — —1-Pole 20 BF120 10 — —25 BF125■ 10 — —30 BF130 10 — —BLF 15 BF215 — 10 —2-Pole 20 BF220 — 10 —30 BF230 — 10 —40 BF240■ — 10 —50 BF250■ — 10 —60 BF260■ — 10 —BLHF 15 BF115H 22 — —1-Pole 20 BF120H 22 — —30 BF130H■ 22 — —BLHF 15 BF215H■ — 22 —2-Pole 20 BF220H■ — 22 —30 BF230H■ — 22 —40 BF240H■ — 22 —50 BF250H■ — 22 —60 BF260H■ — 22 —5. Select ground bar and fillerplates. (See replacement parts& accessories on Page 10-11.)SelectionBLH Branch Breakers – 22,000A IRAmp 1-Pole 2-Pole 3-PoleRating 120/240V 120/240V 240V15 B115H B215H B315H20 B120H B220H B320H25 B125H B225H B325H30 B130H B230H B330H40 B140H B240H B340H50 B150H B250H B350H55 B155H — —60 B160H B260H B360H70 B170H B270H B370H80 — B280H B380H90 — B290H B390H100 — B2100H B3100HBQD Branch Breakers – 14,000A IR Max. @ 480/277 Vac /65,000A IR max. @ 240 VacAmp 1-Pole 2-Pole 3-PoleRating 277V 480Y/277V 480Y/277V15 BQD115 BQD215 BQD31520 BQD120 BQD220 BQD32025 BQD125 BQD225 BQD32530 BQD130 BQD230 BQD33035 BQD135 BQD235 BQD33540 BQD140 BQD240 BQD34045 BQD145 BQD245 BQD34550 BQD150 BQD250 BQD35060 BQD160 BQD260 BQD36070 BQD170 BQD270 BQD37080 BQD180 BQD280 BQD38090 BQD190 BQD290 BQD390100 BQD1100 BQD2100 BQD3100■ Built to order. Allow 2–3 weeks for delivery. HACR rated.10-14Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

PanelboardsFactory AssembledSelectionCatalog Numbering SystemP 1 C 4 2F X2 5 0 A T SType of PanelP1, P2, P3, P4, P5Voltage and SystemC = 208Y/120 3Ø 4 W Wye AC - AllR = 415/240 3Ø 4 W Wye AC - AllE = 480Y/277 3Ø 4 W Wye AC - AllS = 440/250 3Ø 4 W Wye AC - AllD = 240 3Ø 3 W Delta AC - AllL = 600/347 3Ø 4 W Wye AC - AllF = 480 3Ø 3 W Delta AC - AllT = 230 3Ø 3 W Delta AC - AllG = 600 3Ø 3 W Delta AC - P2, P3, P4, P5Z = 380 3Ø 3 W Delta AC - P2, P3, P4, P5I = 347 3Ø 3 W Delta AC P2, P3, P4, P5 1 = 24V DC 1-Pole Branches Only (3) - AllB = 240/120 3Ø 4 W Delta BØ High Leg AC - All2 = 24V DC 2-Pole Branches Only (3) - AllQ = 240/120 3Ø 4 W Delta CØ High Leg AC - All3 = 48V DC 1-Pole Branches Only (3) - AllX = 120/240 2Ø 5 W Single Neutral AC - P2, P3, P4, P5 4 = 48V DC 2-Pole Branches Only (3) - AllA = 120/240 1Ø 3 W Grounded Neutral AC (2) - All5 = 125V DC 1-Pole Branches Only (3) - AllH = 120 1Ø 2 W Grounded Neutral AC (2) - AllN = 125V DC 2-Pole Branches Only - AllJ = 240 1Ø 2 W No Neutral AC (3) - AllO = 125/250V DC 2-Pole Branches Only - AllY = 125 1Ø 2 W Grounded Neutral AC (2) - P2, P3, P4, P5 P = 125/250V DC 2 & 3-Pole Branches - AllZ = 500 2W DC - P2, P3, P4, P5U = 120V AC 3Ø3W - AllK = 220/127 3Ø 4 W Wye AC - AllV = 240V 3Ø3W Grounded B Phase - AllM = 380/220 3Ø 4 W Wye AC - AllCircuits or Enclosure HeightP1 – 18, 30, 42P2 – 18, 30, 42, 54 P3 – 56, 62, 68, 74, 80P4, P5 – 60, 75, 90Main Lug (ML), Main Breaker(See Main Breaker Table coding below), Main Switch (MS)Amperage100–400A = P1 250 – 800A = P3100–600A = P2 400 –1200A = P4, P5Bus Material Bus Plating LetterTemp rated Al. Tin-Plated A750A/sq. in. Al. Tin-Plated BTemp rated Cu. Tin-Plated CTemp rated Cu. Silver-Plated ETemp rated Cu. Tin-Plated F1000A/sq. in. Cu. Tin-Plated G1000A/sq. in. Cu. Silver-Plated HA • • • • •B n/a • • • •C • • • n/a n/aF n/a • • • •E n/a optional optional • •G n/a • • optional optionalH n/a optional optional • •• Indicates default for this bus type.Feed LocationT = TopB = BottomMountingS = SurfaceF = Flush. Flush trims extend 1 1/2" beyond the base box dimensions on P1, P2 and P3 and 2" on P4 and P5 panels.Main Breaker CodingBusCode P1 P2 P3 P4 P5(Breaker Type) Code(BAF) BA, (BAFH) BF, (BQD) BQ, (NGB) NB, (BQD6) B6, (BL) BL, (BLEH) BE, (BLH) BH, (BLR) BR, (HBL) HB, (BGL-SWI) B1,(BLE-GFCI) BG, (BLF-GFCI) BC, (CED6) CE, (ED4) E4, (ED6) E6, (HED4) H4, (HHED6) HA, (BLHF-GFCI) B4, (BL-HID) B2,(HQP) HQ, (QP) QP, (QPH) PQ, (QJ2) QJ, (QJ2H) Q2, (QJH2) QH, (CFD6) CF, (FD6) FD, (FXD6) FX, (HFD6) HF, (HFXD6) H2,(HHFD6) H1, (HHFXD6) H3, (CJD6) CJ, (HHJD6) 6H, (HHJXD6) H9, (HJD6) H6, (HJXD6) H5, (HJXD6H) H7, (HQJ2H) Q3,(JD6) J6, (JXD2) JD, (JXD2H) J2, (JXD6) JX, (JXD6H) JH, (CLD6) CL (HHLD6) HH, (HHLXD6) XH, (HLD6) HL, (HLXD6) HO,(HLXD6H) HP, (LD6) L6, (LXD6) LX, (LXD6H) HL, (HLMD6) HJ, (HLMXD6) HK, (LMD6) L1, (LMXD6) LM, (NMX) M1, (HMX) M2,(LMX) M3, (NNX) N1, (HNX) N2, (LNX) N3, (NNY) N4, (HNY) N5, (LNY) N6, (CMD6H) CH, (HMD6) HM, (HMXD6) HR,(HMXD6H) HS, (MD6) MD, (MXD6) MX, (MXD6H) MH, (CND6) CN, (CND6H) C6, (HND6) HN, (HNXD6) HT, (HNXD6H) HX,(ND6) ND, (NXD6) NX, (NXD6H) NT Panel must not be a lighting and appliance panel. SeeNEC article 384. Standard bussing in P1, P2 and P3 panels is tinplatedfor aluminum and copper. Standard bus istemperature rated to the maximum amperage inthe panel.10 PANELBOARDSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-15

PanelboardsCircuit Breaker / Lighting and DistributionTypes P11) To specify a particular panelboard;list panel catalog number, branches,modifications, and price on anEstimate Sheet. Price includes interiorwith provisions, box, ground bar, andtrim. See Example No. 1.2) When more than 42 circuits arespecified for P1 a two section panelwill be required. Feed-thru lugs mustbe priced in one section from themodifications on pages 10-20.Example No. 2 is a two sectionpanel, each having 42 circuits.Section One will contain 1-225/3 QJ2main breaker (top feed), 250Afeed-thru lugs and 21" of unit space.Section Two will contain 250A mainlugs only (bottom feed) and 21" ofunit space. Sections will be 44"in height.Pricing3) Standard main breakers are indicatedby the 6th and 7th positions in thecatalog number. If any other mainbreaker type is required, replace withthe appropriate code from page 10-18.See Example No. 3.4) All panel modifications must be listedand priced separately.5) If the boxes are to be sized the samethen each panel must have the sameamount of unit space.Panel LPA1 — P1C30QJ225ATS 2540.10–20/1 25. ea. 250.4–30/3 140. ea. 560.3350.Panel LPB1 — P1C42QJ225ATS 2760.1 — P1C42ML250ATS 1330.1 — Feed-Thru Lugs 190.4280.Panel LPC1 — P1C42HF250CTS 3160.HFD6 Main 1900.42–20/1 BLH 35. ea. 1470.Cu Bus 255.Type 3R 860.7645.Example No. 1Type P2Type P2 panelboards are priced thesame as Type P1 described above exceptfor two section panels.1) When more than 42 circuits arespecified for P2, a two section panelwill be assumed. Main breaker codesin the 5th and 6th positions willdictate the use of feed-thru lugs.An “ML” in the fifth and sixthpositions will dictate the use ofsubfeed lugs for 125A and 250A andfeed-thru lugs for 400A and 600A.Types P3, P4 and P51) To specify a particular panelboard,first determine voltage, system,amperage and type of main,amperage and type of branchdevices, and modifications if any.(Step 1)Example No. 2Boxes will be sized the same for twosection panels.Base price includes all provisions.Subfeed or feed-thru lugs asrequired must be priced frompage 10-28.Example No. 4 is a two sectionpanel, each having 42 circuits.Section One will contain 1-400/3JXD6 main breaker (top feed), 225Afeed-thru lugs, and 21" of unit space.Section Two will contain 400A main2) List branch devices andmodifications requiring spaceadditions. List unit spacerequirements of each.Note: Some units are twin mountedmeaning two breakers occupy thesame unit space.Example No. 3lugs only (bottom feed) and 21" ofunit space. Sections will be 53"in height.Select appropriate enclosure heightfrom selection chart on pages 10-34,10-44, or 10-56, based on unit spacerequirements. (Step 2)3) Select panelboard catalog numberfrom appropriate table based uponvoltage, system, amperage and unitspace requirements. (Step 3)Step #1Step #2Unit Space CalculationStep #310PANELBOARDSAmperage 400Voltage 208Y/120System 3-phase 4-wireMainMain BreakerBranches 5-125/3, 2-225/3,1-250/3Modification NoneFeedTopMounting Surface5-125/3 QJ2 5" = 15"5-225/3 QJ2 5" = 5"1-250/3 FXD6 5" = 5"25"Enclosure is B275 from SelectionChart on page 10-41.(32" wide, 75" high, 10" deep).1—P4C75JX400ATS $04210.5-125/3 QJ2 940. 4700.2-225/3 QJ2 940. 1880.1-250/3 FXD6 2700. 2700.13490.For inches / millimeters conversion, see Application Data section.10-16Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

PanelboardsCircuit Breaker / Lighting and DistributionType P1480Y/277 Vac Maximum600Y/ 347 Vac (CSA only) Maximum400 Ampere Mains400 Ampere Maximum BranchUL Short Circuit Rating —200,000 A. @ 240 Vac / 100,000 A. @480/277 Vac. IR MaximumBranch Breaker SymmetricalInterrupting CapacityBased on Underwriters’ Test ProcedureFeed thru and subfeed lugs may result inlower interrupting ratings if not protectedby a main device. Consult sales office.Meets 2005 NEC wire bendingrequirement, section 312.6.Meet Federal Specification W-P-115C.PanelboardsListed by Underwriters’ Laboratories,Inc., under ”Panelboards” File #E2269for interiors and #E4016 for boxesand fronts.Service1-phase 2-wire - 120 Vac, 240 Vac,24 Vdc, 48 Vdc, 125 Vdc1-phase 3-wire - 120/240 Vac, 125/250Vdc3-phase 3-wire - 480Y/277 (when derivedfrom 3-phase 4-wire system), 240 Vac,120 Vac, 125/250 Vdc3-phase 4-wire - 208Y/120 Vac,240/120 Vac, 480Y/277 Vac,600Y/347 Vac, 380/220 Vac.Panelboard Fronts and DoorsStandard panelboards are furnishedwith trim featuring concealed fastenersand hinges with a flush door lock.All are factory-assembled for ease ofinstallation. Fronts are fabricated fromcode gauge steel and finished ANSI-61.See page 10-71 for optional fronts.Main BreakersBL, BLH, HBL, BQD, ED4, ED6, HED4,HHED6, QJ2, QJH2, QJ2-H, FXD6, FD6,HFD6, HFXD6, JXD6, JD6, HJXD6,HJD6. (All main breakers except 400amp frame are mounted horizontal.)Main Breaker Panel ConnectorsAmpereRating Connectors Suitable for Cu or Al100 (1)—#14 1/0 AWG125 (1)—#4 1/0 AWG225 (1)—#4 AWG–300 kcmilConnector ranges indicated do not applyto all main breaker types. Refer to moldedcase circuit breaker standard pressurewire connector chart (Section 6) for theconnector range of a specific frame.Main Lug Connectors125 (1)—#6 AWG–350 kcmil250 (1)—#6 AWG–350 kcmilBoxes20" wide, 5.75" deep▪ End walls are blank as standard.End walls with knockouts will besupplied at no charge on 5.75" deeppanels if requested at time of order. P1 400 amp main breaker panels have wire bending Feed-thru lug and neutral wire bending space is 15.000"space available for 600 kcmil.and 16.250" respectively on 400A panel. 400A main breaker is vertical mounted. P1 panel limited to (1) subfeed 250 amperes max.For inches / millimeters conversion, see Application Data section.250400400(1)—#4/0 AWG–350 kcmil Al(1)—#6/0 AWG–350 kcmil Cu(2)—#3/0 AWG–250 kcmil Al or(1)—#3/0 AWG–500 kcmil Al(2)—#3/0 AWG–250 kcmil or(1)—#3/0 AWG–600 kcmilMain Breaker Gutter Dimensions(inches)SideNeutralGutter LocationMain 20" 24" 20"Breaker w/box w/box w/boxBL, BLH, HBL, BQD 8.500 10.500 11.500NGB 8.000 10.000 11.500ED4, ED6, HED4 6.125 8.125 11.500QJ2, QJH2, QJ2-H 6.500 8.500 11.500FD6, FXD6, HFD6 5.250 7.250 11.500JD6 , JXD6 15.000 15.000 26.750Main Lug End Gutter Dimensions(inches)Amp End NeutralRating Gutter Location125 10.500 11.500250 10.500 11.500400 25.500 26.750GeneralSide Gutter Wiring Space (inches)PanelReference Panel Width 24"Letter Width 20" (Optional)A 6.375 7.375B 5.500 7.500C 6.125 8.125D 6.500 8.500E 5.250 7.250F 5.000 7.000Branch Breaker Side GuttersABCDEFBL, BLH, HBLBLF, BLHFBQDBL, BLH, HBLBLF, BLHFBQDED, ED4, ED6, HED4, HHED6QJ2, QJH2, QJ2-H FXD6, FD6, HFD6NGBNGBWeight — ApproximateTotal panelboard weight when filled witha normal quantity of breakers andaccessories is:▪ About 3 lbs. per inch of box heightGauge Steel BoxesWidth Height Gauge Steel20" All #16Fronts — Surface, Flush20" All #14Series Connected Short Circuit RatingsThe term “Series Connected ShortCircuit Rating” refers to the applicationof series connected circuit breakers in acombination that allows some breakersto have lower individual interruptingratings than the available fault current.This is permitted as long as the seriescombination has been tested andcertified by UL.The table below lists specific mainand branch breaker series combinationsthat are marked on all P1 panels.All combinations shown have beentested for use in P1 panelboards andare UL listed. Other combinations areavailable. See Circuit Breaker Section,of this book.These series ratings must be specifiedon order at time of entry.FAB10 PANELBOARDSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-17

10PANELBOARDSPanelboardsCircuit Breaker / Lighting and DistributionType P1Shown with Standard Mains, Top Fedand Surface TrimCatalog number is for aluminum mainbus. For optional copper main buschange “A” in position 11 to “C”.See copper price adder on page 10-20.Main Lugs OnlyPanels are top feed, surface mounted.For bottom feed, change “T” in position12 to “B”. For flush mounting,change “S” in position 13 to “F”.SelectionReplace fifth and sixth positionin panelboard catalog number,with alternate main breaker code.Use price adders from main breakerselection table. Horizontally mounted.Maximum Maximum Box208Y/120V 120/240V 480Y/277VPanel 1-Pole Height 3-Phase, 4-Wire List 1-Phase, 3-Wire List 3-Phase, 4-Wire ListAmpere Rating Circuits (inches) Catalog Number Price $ Catalog Number Price $ Catalog Number Price $18 32 P1C18ML125ATS 840.00 P1A18ML125ATS 750.00 P1E18ML125ATS 910.00125 30 38 P1C30ML125ATS 1060.00 P1A30ML125ATS 980.00 P1E30ML125ATS 1190.0042 44 P1C42ML125ATS 1250.00 P1A42ML125ATS 1180.00 P1E42ML125ATS 1440.0018 32 P1C18ML250ATS 910.00 P1A18ML250ATS 820.00 P1E18ML250ATS 1020.00250 30 38 P1C30ML250ATS 1100.00 P1A30ML250ATS 1010.00 P1E30ML250ATS 1270.0042 44 P1C42ML250ATS 1330.00 P1A42ML250ATS 1230.00 P1E42ML250ATS 1540.0018 56 P1C18ML400ATS 1240.00 P1A18ML400ATS 1110.00 P1E18ML400ATS 1240.00400 30 62 P1C30ML400ATS 1440.00 P1A30ML400ATS 1340.00 P1E30ML400ATS 1440.0042 68 P1C42ML400ATS 1710.00 P1A42ML400ATS 1580.00 P1E42ML400ATS 1710.00Main Circuit Breaker18 32 P1C18BL100ATS 1170.00 P1A18BL100ATS 1060.00 P1E18BD100ATS 1520.00100 30 38 P1C30BL100ATS 1370.00 P1A30BL100ATS 1250.00 P1E30BD100ATS 1740.0042 44 P1C42BL100ATS 1640.00 P1A42BL100ATS 1450.00 P1E42BD100ATS 2230.0018 32 P1C18NB125ATS 1710.00 P1A18NB125ATS 1600.00 P1E18NB125ATS 1710.00125 30 38 P1C30NB125ATS 1920.00 P1A30NB125ATS 1790.00 P1E30NB125ATS 1920.0042 44 P1C42NB125ATS 2190.00 P1A42NB125ATS 2010.00 P1E42NB125ATS 2190.0018 32 P1C18QJ225ATS 2350.00 P1A18QJ225ATS 1950.00 P1E18FX225ATS 2510.00225 30 38 P1C30QJ225ATS 2540.00 P1A30QJ225ATS 2150.00 P1E30FX225ATS 2780.0042 44 P1C42QJ225ATS 2760.00 P1A42QJ225ATS 2360.00 P1E42FX225ATS 3030.0018 32 P1C18FX250ATS 2760.00 P1A18FX250ATS 2360.00 P1E18FX250ATS 2760.00250 30 38 P1C30FX250ATS 2950.00 P1A30FX250ATS 2550.00 P1E30FX250ATS 2950.0042 44 P1C42FX250ATS 3160.00 P1A42FX250ATS 2770.00 P1E42FX250ATS 3160.0018 56 P1C18JX400ATS 3160.00 P1A18JX400ATS 2650.00 P1E18JX400ATS 3990.00400 30 62 P1C30JX400ATS 3370.00 P1A30JX400ATS 2850.00 P1E30JX400ATS 4190.0042 68 P1C42JX400ATS 4540.00 P1A42JX400ATS 3160.00 P1E42JX400ATS 4540.00Main Breaker Selection (Cost adder for other than std.)Ampere Breaker Maximum Interrupting Rating Catalog ListRating Type 240 Vac 480/277 Vac Number Price $ Available Trip ValuesBL 10 — BL STD @ 240 Vac 15, 20, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100100BLH 22 — BH 65. 15, 20, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100HBL 65 — HB 400. 15, 20, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100BQD 65 14 BQ 400. @ 240 Vac / STD @ 480/277 Vac 15, 20, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100NGB 100 25 NB STD 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100, 110, 125125ED4 65 18 E4 55. 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100, 110, 125HED4 100 42 H4 540. 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100, 110, 125HHED6 100 65 HA 540. 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100, 110, 125QJ2 10 — QJ STD @ 240 Vac 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225QJH2 22 — QH 75. 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225QJ2-H 42 — Q2 160. 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225HQJ2H 100 — HQ 1360. 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225225 FD6 35 FD 140.FXD6 65 35 FX 140. 70, 80, 90, 100, 110, 125, 150, 175, 200, 225HFD6 100 65 HF 1760. 70, 80, 90, 100, 110, 125, 150, 175, 200, 225HFXD6 65 H2 1760.HHFD6 200 100 H1 2120. 70, 80, 90, 100, 110, 125, 150, 175, 225FD6 FD STDFXD6 65 35 FX STD 250250 HFD6 100 65 HF 1900. 250HFXD6 H2 1900.HHFD6 200 100 H1 2120. 250JD6 J6 STD400JXD6 65 35 JX STD 200, 225, 250, 300, 350, 400HJD6 100 65 H6 2270. 200, 225, 250, 300, 350, 400HJXD6 H5 2270.For inches / millimeters conversion, see Application Datasection.Note: Price branch devices from page 10-19.10-18Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

PanelboardsCircuit Breaker / Lighting and DistributionType P1Branch Breaker SelectionSelectionAvailableProvisionsMaximum InterruptingBreaker AmpereList Price $ InstalledforRating (kA)Type Rating 1-Pole 2-Pole 3-Pole Future $ 120V 120/240V 240V 277V 480/277V15, 20, 25, 30, 35, 40, 45, 50, 60 25. 45. 140. —BL (120V) 70 35. 85. 190. — 10 10 — — —80, 90, 100 — 140. 210. —BL (HID) 15, 20, 30 40. 70. — — — — — — —15, 20, 25, 30, 35, 40, 45, 50, 55, 60 35. 85. 220. —BLH (120V) 70 75. 130. 300. — 22 22 — — —80, 90, 100 — 200. 310. —HBLBLF (GFCI)15, 20, 30, 40, 50 65. 150. 290. —60, 70, 80, 90, 100 — 400. 480. —15, 20, 30 140. 240. — —40, 50, 60 — 250. — —65 65 6510 — — — —BLE (EQGFI) 15, 20, 30 220. 330. — — 10 — — — —BLEHBGL (SWN)15, 20, 30 420. 530.40, 50, 60 (2-Pole Only) — 530.15, 20, 30 — 100. — —15, 20, 30 — — 120. —— — 22 22 — — —10 10 — — —BAF 15, 20 160. 330. — — 10 — — — —BAFH 15, 20 180. 340. — — 22 — — — —BLR (240V)BLHF (GFCI)BQDNGB15, 20, 25, 30, 35, 40, 45, 50, 55, 60 — 110. — —70, 80, 90, 100 — 190. — —15, 20, 30 160. 280. — —40, 50, 60 — 300. — —15, 20, 30, 40, 50, 60 85. 270. 380. —70, 80, 90, 100 200. 400. 490. —10 10 10 — —22 22 — — —65 65 65 14 1415, 20, 30, 40, 50, 60 130. 360. 480. —70, 80, 90, 100, 210. 420. 540. — 100 100 100 25 25110, 125 — 710. 910. —Subfeed Breakers — Limit One Per PanelAvailableProvisionsMaximum InterruptingBreaker AmpereList Price $ InstalledforRating (kA)Type Rating 1-Pole 2-Pole 3-Pole Future $ 120V 120/240V 240VED4HED4HHED615, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100 — 520. 670. 120. — — 65110, 125 — 880. 1120. 120. — — 6515, 20, 30, 40, 50, 60, 70, 80, 90, 100 — 690. 770. 120. — — 100110, 125 — 1260. 1460. 120. — — 10015, 20, 30, 40, 50, 60, 70 — 1270. 1400. 120. — — 10080, 90, 100, 110 — 1270. 1400. 120. — — 100QJ2 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225 — 420. 880. 170. — — 10QJH2 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225 — 930. 1140. 170. — — 22QJ2H 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225 — 1080. 1410. 170. — — 42HQJ2H 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225 — — 1940. 170. — — 100FXD6 70, 80, 90, 100, 110, 125, 150, 175, 200, 225, 250 — 1220. 1540. 220. — — 65HFD6 70, 80, 90, 100, 125, 150, 175, 200, 225, 250 — 2440. 2550. 220. — — 100Note: BGL Breaker — 1-pole takes 2" unit space or 2-poles— 2-pole takes 3" unit space or 3-polesNote: 1-pole HBL limited to 50 amps10 PANELBOARDSDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-19

PanelboardsType 1 P1 Panelboard Modifications and AdditionsEnclosuresListDescription Price $6" end gutter . . . . . . . . . . . . . . . . . . . . . 235.2" side gutter . . . . . . . . . . . . . . . . . . . . . 200.Barrier in gutter (add to extragutter price) . . . . . . . . . . . . . . . . . . . . 200.24" wide . . . . . . . . . . . . . . . . . . . . . . . . . 235.Hinged trims . . . . . . . . . . . . . . . . . . . . . 160.Piano hinged trims . . . . . . . . . . . . . . . . 360.Door-in-door trims . . . . . . . . . . . . . . . . 360.Screw to the box trims . . . . . . . . . . . . . 160.Trim mounted devices . . . . . . .See page 10–72• Pilot lights• Toggle switches• Push buttons(Devices mounted to be wired to the trimshould also have hinged trim specified)Painted boxes . . . . . . . . . . . . See page 10–72Custom colors . . . . . . . . . . . See painted boxesIncrease gauge trimsand boxes . . . . . . . . . . . . . See page 10–72Stainless steel trimsand boxes, Type 1 . . . . . . See page 10–72Aluminum trimsand boxes, Type 1 . . . . . . See page 10–72Meters(Contact sales for pricing and applicationengineering for space requirements)Panel Skirts See page 10-73Special LocksTEY . . . . . . . . . . . . . . . . . . . . . . . . . . . 235.TEU1 . . . . . . . . . . . . . . . . . . . . . . . . . . 255.Cat 60 . . . . . . . . . . . . . . . . . . . . . . . . . 235.LL803 . . . . . . . . . . . . . . . . . . . . . . . . . 235.LL806 . . . . . . . . . . . . . . . . . . . . . . . . . 235.Yale 47 (NYC) . . . . . . . . . . . . . . . . . . . 425.Panel ModificationsCatalogAmp RatingsMain Bus Number* 125A 250A 400ACopper (tin pltd.) C 255. 255. 390.* “C” represents “A” in the 11th digit ofthe catalog number.Branch and Main Breaker andAccessoriesSee breaker section for pricing on the followingoptions• Handle blocks• Handle locks• Aux. Contacts • UVR Bus mounted TVSS . . . . . see section 9Service Entrance LabelType P1 Panelboards are factory labeledsuitable for use as service entranceequipment when NEC requirements are met.A panelboard cannot have more than sixmain disconnects, unless it is a lighting andappliance branch panelboard. Lighting andappliance branch panelboards are limited totwo main disconnects.Grounding of PanelboardsGround Bars except for brazed to box areshipped with the panel interior factorymounted.• Non-Insulated Equipment Ground Bar – STD• Copper Non-Insulated Ground Bar . . . . . . 40.• Al Insulated Equipment Ground Bar. . . . . 40.• Cu Insulated Equipment Ground Bar . . . . 75.• Ground Bar Brazed to Box . . . . . . . . . . . 245.(recommended for painted boxes)Shunt Trip on Main or BranchBL, BLH, HBL, BQD as branch only. BL,BLH, HBL uses 1" unit space for shunttrip as a branch device. All others maybe used on mains or subfeeds. Seebreaker section for list price adders.QJ2, QJ2-H, QJH2, HQJ2H, ED4, ED6, HED4,HED6, HHED6, FXD6, HFD6, JXD6, JD6, HJD6,HJXD6Remote Control Switches480V AC max. mounted in a 23"enclosure to be cable connected to thepanel.Time ClocksTime clocks may be mounted in a 23"enclosure to be cable connected to thepanel. Sangamo, Tork or Paragon timeclock can be supplied.ListDescription Price $Time Clock (1 or 2-pole, singleor double throw contacts; 3-pole,single throw) 277V maximum withplain dial 1070.Astronomical dial 210.An omitting device 75.Reserve power or carryover 2450.Space and mountingprovisions only 540.Remote Switches Modifications(See page 10-71)SelectionApplication for Remote SwitchSwitch Type ModificationMounts in 23" relay cabinet as920a main only≤ 150 AMPS mounts in 23"911relay cabinet as a main only>150 AMPS not available30A mounts in 23" relayLENcabinet as a main onlyFeed-Thru LugsCannot be used in conduction withTVSS or subfeed breakersAmpere ListConnectorRating Price $ Type Range190.Al/Cu Lay-in (1)—#6 AWG-Mechanical 350 kcmil250 370.Cu Lay-in (1)—#6 AWG-Mechanical 350 kcmil285.Al/Cu(1)—#6 AWG-Compression 350 kcmil490.Al/Cu(2)—#3/0 AWG-AWG Mechanical 250 kcmil or(1)—#3/0 AWG-600 kcmil(2)—#3/0 AWG-400 775. Cu 250 kcmil or(1)—#3/0 AWG-600 kcmil585.Al/Cu (1) 400—600Compression kcmilNote: Specify copper or aluminum cable.PANELBOARDS10 Accessories on 1" pole breakers (BL, BQD, ED) will takeunit space.10-20Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

PanelboardsType P1 Panelboard Connector ModificationsCompression LugsSelectionList Price Adder $Amp Breaker Compression Box Height 3-Phase/ 3-Phase/ 1-Phase/ 1-Phase/Style Rating Type Connectors Addition 4-Wire 3-Wire 3-Wire 2-Wire125MLO250N/A (1) #4 AWG - 350 kcmil None 105. 105. 105. 105.400 N/A (1) 250-600 kcmil or(2) #3/0 AWG - 250 kcmilNone 150. 150. 150. 150.125 ED4, ED6, HED4MainHHED6, CED6(1) #12-1/0 AWG Box must go to 24" wide 115. 85. 85. 85.Breaker 225 QJ2, QJH2, QJ2H (1) #6 AWG - 350 kcmil Cu or AI Box must go to 24" wide for all breakers 225. 180. 180. 180.250 FXD6, HFD6, CFD6 (1) #6 AWG - 350 kcmil Cu or AI Box must go to 24" wide for all breakers 225. 180. 180. 180.NOTE: Standard compression lugs used for P1 panels are range taking lugs and may require a particular crimping tool to accommodate the range. Consult factory for information. 200%neutral not available with compression lugs.Enclosure ModificationsList Price Adder $Panel PanelWidth WidthDescription 20" 24"NEMA 3R enclosures 860. 1180.NEMA 3R/12 enclosures 1175. 1180.Gasket between trim 680. 900.and box (Type 1)NEMA-4—Water Tight, Dust Tight,Steel Enclosure (consult plant foractual enclosure size)Box Height Enclosure Size List Price(inches) H W D Adder $32 32 20 5.75 4230.38 38 20 5.75 5330.44 44 20 5.75 6605.56 56 20 5.75 16260.62 62 20 5.75 17500.68 68 20 5.75 19025.Additional Enclosure ModificationsDescription List Price $Strip Heaters 895.Humidstat Control 1570.Thermostat Control 1570.NEMA-4X—Water Tight, Dust Tight and Corrosion Resistant(consult plant for actual enclosure size)Enclosure - Stainless Steel Enclosure - FiberglassBox Height & Steel with Epoxy Coating Size (inches) List(inches) H W D H D W Price $32 32 20 5.75 36 24 8 10145.38 38 20 5.75 48 36 12 12085.44 44 20 5.75 48 36 12 15805.56 56 20 5.75 60 36 12 20265.62 62 20 5.75 66 36 12 23710.68 68 20 5.75 72 36 12 27435.Remote Switches Modifications (See page 10-71)Application for Remote SwitchSwitch Type Modification920 Mounts in 23" relay cabinet as a main only911≤ 150 AMPS mounts in 23" relay cabinet as a main only>150 AMPS not availableLEN30A mounts in 23" relay cabinet as a main only10 PANELBOARDSDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-21

PanelboardsType P1DimensionsType 1 BoxBox is symmetricalBox To WallMounting Holes2 in.[ 51 ].31 in.[ 8 ]4.63 in.[ 118 ]MountingDimpleInterior To BoxMountingStubs32 in., 38 in., 44 in.[ 813 ] [ 965 ] [ 1118 ]56 in., 62 in., 68 in.[ 1422 ] [ 1574 ][ 1727 ]4.63 in.[ 118 ]12.63 in.[ 321 ]15 in.[ 381 ]20 in.[ 508 ]2 in.[ 51 ]5.75 in.[ 146 ]Type 3R and 3R/12 Box7.5 in.[ 191 ].50 in.[ 13 ]2 in.[ 51 ]32 in., 38 in., 44 in.[ 813 ] [ 965 ] [ 1118 ]56 in., 62 in., 68 in.[ 1422 ] [ 1574 ][ 1727 ]MountingBracket2 in.[ 51 ]2 in.[ 51 ]10PANELBOARDS20 in.[ 508 ]21.5 in.[ 546 ]23.5 in.[ 597 ]1 in.[25]5.75 in.[ 146 ] Dimensions are interior of the box. Add 5/8" to width for absolute dimension.Add 1/8" to height for absolute dimension.Dimensions shown in inches and millimeters [ ].10-22Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

PanelboardsType P2 PanelboardsFeaturesFlexibility is the hallmark of the P2 panel.This panel offers a wide array of factoryassembledoptions to meet almost alllighting panel applications. With thisdesign, the ability to mix breaker framesin unit space up to 250 amps will alsomeet many distribution panel requirementsin a much smaller package. Bussingoptions for the P2 vary from the typicaltemperature rated to 750 A/Si aluminumto 1000A/Si copper. Standard bussing inthe P2 panel is tin-plated. Silver-platedcopper is also offered as an option.Integrated time clocks, bus mountedcontactors, as mains or sub mains, splitbus, and subfeed lugs (up to 400 amp)are just a few of the options of thisunique panel.Like a lighting panel, P2 is set up around18, 30, 42, and 54 circuit configurations.It will also allow the user to configurethe panel to the smallest possible size.The P2 panel starts with 9" of unit space(18 circuits of 1" pole breakers). Breakersmounted in unit space can be mixed andmatched to meet customer requirements.All 1" pole breakers (BL, BQD, ED frames)are mounted in 3" or 6" pole increments.Breaker frames, above 125 amps, aremounted in 6" single breaker mountings.As an example of a minimum panel, (6)20 amp 1-pole BL breakers (3" of unitspace) and a 3-pole 225 amp QJ breaker(6" of unit space) equaling 9" of unitspace can be configured in a P2 panelwithout any extra provisions or spacerequired. FD 250 amp and JD 400 ampbreakers are mounted as subfeedbreakers outside of unit space.Another unique feature of the P2 panel isthat blank unit space can be added toallow for future expansions ormodifications. Any expansions ormodifications must be in 3" increments.BL, BQD, and ED frame breakers have 3"or 6" pole kits, and can be mixed in unitspace by these increments. Breakers ofthe same frame can cross from onemounting to another if contiguous. QJframe breakers are mounted in 6"increments for two- and three pole, singlemounted units. Changes in the unit spacelength for BL, BQD, or ED frame breakersrequire an addition deadfront, center stripkit. Check with sales or the factory foradditional unit space kits.Main Lug / Main BreakerEnclosure – Standard Type 1 enclosureis 20" wide x 5.75" deep X. Box Height isdetermined by main device and unitspace. See charts for box height.20 (508) 26–74 (660–1880) #16 #14GeneralVoltage – 600V AC max.250V DC max.Amperage – 600 amp max.Short circuit rating – 200 KAIC max.symmetrical or equal to the lowest rateddevice installed unless a series ratingis indicated. Panels with subfeed orfeed-thru lugs without a main device,circuit breaker or fusible unit, are limitedto a three-cycle rating. The three-cyclerating for the P2 panel is limited to 22KAIC. Note that the main device maybe mounted remote from the panel.Bussing – The P2 panel has moreoptions to meet market requirements.The standard bussing is temperaturerated aluminum. The rating is per therequirements of UL 67 – the standard forpanelboards. All aluminum bussing istin-plated. Optional bussing for the P2panel is: 750 A/Si aluminum, temperaturerated copper, and 1000 A/Si copper.The copper bus option for this panel istin-plated.Weight – ApproximateTotal panelboard weight when filledwith a normal quantity of breakers andaccessories is about 3 lbs. (1 kg) perinch (54g per mm) of box height.Gauge Steel of Boxes Fronts, Surface and FlushDimensions in inches (mm)Gauge SteelWidth Height Box Front10 PANELBOARDSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-23

PanelboardsType P2 PanelboardsSelection/DimensionsPanel Unit Space To Box Height Requirements (See wire bending space diagrams below for ”A” and ”B” dimension references)P2 Panels With Standard Line Lugs. Unit Space (starting with 9" and adding 6" increments) “A” Dimension“B”DimensionMain LugsMain Breakers125A 125A 125A 225A 250A 250ABox Horiz. Horiz. Vert. Horiz. Horiz. Vert. 400A 400A 600A 600AHeight 125A 250A 400A 600A BL, BQD, ED CED ED QJ FD CFD JD CJD LD CLD26 9 — — — 9 — — — — — — — — —32 15 9 — — 15 9 9 9 — — — — — —38 21 15 9 9 21 15 15 15 9 — — — — —44 27 21 15 15 27 21 21 21 15 — — — — —50 33 27 21 21 33 27 27 27 21 9 9 — — —56 39 33 27 27 39 33 33 33 27 15 15 — 9 —62 45 39 33 33 45 39 39 39 33 21 21 9 15 968 51 45 39 39 51 45 45 45 39 27 27 15 21 1574 57 51 45 45 57 51 51 51 45 33 33 21 27 21Main BreakerPanel Amps Breaker Frames C D100BL 5.75 8.00BQD 5.125 8.00125NGB 4.625 8.00ED 4.00 8.00225 QJ 5.00 7.00250 FD 5.00 7.00400 JD 14.00 25.00600 LD 15.50 23.00Main Lug ConnectorsPanel Amps Standard Connectors C D125 (1) #14 - 2/0 6.62 8.19250 (1) #6 AWG - 350 kcmil 12.34 11.22400(1) #4 AWG - 600 kcmilor (2) #6 - 250 kcmil14.00 13.09600 (2) #4 AWG - 500 kcmil 14.00 11.00Main breaker wire bendingspace diagramMain lug wire bendingspace diagramBranch Breaker Side GuttersInches (mm)ReferenceLetter Panel Width 20" (508)A 5.750 (146)B 5.125 (130)C 4.000 (102)D 5.000 (127)E 4.625 (117) Single branch mounting construction.Box depth = 5.75 in. (146 mm)Box width – 20 in. (508 mm)for 100-600ABox depth = 5.75 in. (146 mm)Box width – 20 in. (508 mm)for 100-600AABCDEBranch breaker wire bendingspace diagramBL, BLH, HBL BL, BLH, HBLBLF, BLFH BLF, BLFHBQD, BQD6 BQD, BQD6ED, ED4, ED6 ED, ED4, ED6HED4, HHED6 HED4, HHED6QJ2, QJH2, QJ2-H, HQJ2H(Single Mounted)NGBNGBPanel Width20 in. (508 mm)Branch Breaker Side GuttersABCEPANELBOARDS1010-24Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

PanelboardsType P2 PanelboardsMain Breaker Selection SelectionMaximum InterruptingRef.Ampere BreakerRating (kA)CatalogList Price Adder $Rating Type 240V 480V 600V Number 240V 480V 600V Available Trip ValuesBL 10 — — BL STD — — 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100HBL 65 — — HB 400. — — 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100BQD 65 14 — BQ 400. STD (480/277) — 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100BLH 22 — — BH 65. — — 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100100ED4 65 18 — E4 330. 330. — 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100NGB 100 25 — NB 250. 55. — 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 100ED6 100 25 14 E6 360. 360. STD 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100HED4 100 42 — H4 540. 540. — 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100HHED6 100 65 18 HA 540. 540. 540. 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100CED6 200 200 100 CE 1960. 1960. 1960. 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100NGB 100 25 — NB STD STD — 110, 125ED4 65 18 — E4 55. 55. — 125125ED6 65 25 18 E6 360. 360. STD 125HED4 100 42 — H4 540. 540. — 125HHED6 100 65 18 HA 540. 540. 540. 125CED6 200 200 100 CE 1960. 1960. 1960. 125QJ2 10 — — QJ STD — — 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225QJH2 22 — — QH 70. — — 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225QJ2H 42 — — Q2 160. — — 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225HQJ2H 100 — — Q3 1360. — — 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225225 FD6 65 35 18 FD 190. STD STD 70, 80, 90, 100, 110, 125, 150, 175, 200, 225FXD6 65 35 18 FX 190. STD STD 70, 80, 90, 100, 110, 125, 150, 175, 200, 225HFD6 100 65 25 HF 1900. 1900. 1900. 70, 80, 90, 100, 110, 125, 150, 175, 200, 225HFXD6 100 65 25 H2 1900. 1900. 1900. 70, 80, 90, 100, 110, 125, 150, 175, 200, 225CFD6 200 200 100 CF 2770. 2770. 2770. 70, 80, 90, 100, 110, 125, 150, 175, 200, 225FD6 65 35 18 FD STD STD STD 250FXD6 65 35 18 FX STD STD STD 250250 HFD6 100 65 35 HF 1680. 1680. 1680. 250HFXD6 65 35 25 H2 1680. 1680. 1680. 250CFD6 200 150 100 CF 1895. 2450. 2610. 250JXD6 65 35 25 JX STD STD STD 200, 225, 250, 300, 350, 400JD6 65 35 35 J6 STD STD STD 200, 225, 250, 300, 350, 400HJXD6 100 65 35 H6 1825. 1825. 1825. 200, 225, 250, 300, 350, 400400HJD6 100 65 35 H5 1825. 1825. 1825. 200, 225, 250, 300, 350, 400SJD6 65 35 25 SJ 2200. 2200. 2200. 200, 300, 400SHJD6 100 65 35 S2 2500. 2500. 2500. 200, 300, 400CJD6 200 200 100 CJ 2650. 2650. 2650. 200, 300, 400SCJD6 200 200 100 SC 4385. 4385. 4385. 200, 300, 400LXD6 65 35 25 LX STD STD STD 450, 500, 600LD6 65 35 25 L6 STD STD STD 250, 300, 350, 400, 450, 500, 600HLXD6 100 65 35 HL 1825. 1825. 1825. 250, 300, 350, 400, 450, 500, 600600HLD6 100 65 35 HO 1825. 1825. 1825. 250, 300, 350, 400, 450, 500, 600SLD6 65 35 25 SL 2500. 2500. 2500. 300, 400, 500, 600SHLD6 100 65 35 S6 4325. 4325. 4325. 300, 400, 500, 600CLD6 200 150 100 CL 3830. 3830. 3830. 300, 400, 500, 600SCLD6 200 150 100 C6 5130. 5130. 5130. 300, 400, 500, 600When an ED4, ED6, HED4, QJ2, QJH2, QJ2H, FD6, HFD6, or FXD6 frame main breaker, vertically mounted, is required, price as a mainbreaker panel and add from the table for the main breaker mounting.Vertically Mounted Main BreakerAmpere Breaker Number of Poles Unit SpaceRating Type(s) 2-Pole 3-Pole (in.)100225ED4 295. 320.ED6 295. 320.HED4 295. 320.QJ2, QJH2, QJ2-H 390. 415.FXD6, FD6, HFD6 625. 670.66Subfeed BreakersMounting PositionWhen Used as Provisions Ampere Maximum Interrupting RatingBreaker Subfeed Breaker List Price $ for Ratings (kA) SymmetricalType Vertical 2-Pole 3-Pole Future $ For Load 240V AC 480V AC 600V ACFD6 , FXD6 Twin 1220. 1540. 220.-- 70–250 65 35 22HFD6 ,HFXD6 Twin 2440. 3010. 220.-- 70–250 100 65 25JD6 , JXD6 Single 1720. 2180. 290.-- 200–400 65 35 25HJD6 , HJXD6 Single 3160. 4220. 290.-- 200–400 100 65 35 Interchangeable trip main breakers are mounted attop of panel only. Vertically mounted. Twin mounted subfeed breakers are mounted at thebottom of panelboard only and adds 24" to the panelheight. Subfeed breaker is mounted at bottom of panelboardonly. 400 amp subfeed breaker adds 24" to the panelheight. (Only for use with MLO)10 PANELBOARDSDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-25

PanelboardsType P2 PanelboardsBranch Circuit Breakers100SelectionMax. Bolt-On ProvisionsAmp Breaker List Price $ for Maximum Interrupting Rating (kA)Rating Type Amps 1-Pole 2-Pole 3-Pole Future $ 120V AC 120/240V AC 240V AC 277V AC 480V AC 600V AC 250V DC12522515–60 25. 45. 140. — 10 — — — — — —BL 70 35. 85. 190. — — 10 — — — — —80–100 — 140. 210. — — — 10 — — — —15–60 35. 85. 220. — — 22 — — — — —BLH 70 75. 130. 300. — — 22 — — — — —80–100 — 200. 310. — — — 22 — — — —HBL15–55 85. 270. 380. — — 65 — — — — —60–100 — 400. 490. — — 65 — — — — —BL, HID 15–30 45. 75. — — 10 10 — — — — —BLR (240V)15–60 — 110. — — — — 10 — — — —70–100 — 190. — — — — 10 — — — —BLE (GFCI)15–30 220. 330. — — 10 — — — — — —40–60 — 330. — — — 10 — — — — —BLEH20–30 420. — — — 22 — — — — — —15–60 — 530. — — — 22 — — — — —BLF (GFCI)15–30 140. 240. — — 10 — — — — — —40–60 140. 250. — — — 10 — — — — —15–30 160. 280. — — 22 — — — — — —BLHF (GFCI)40–60 160. 300. — — — 22 — — — — —BGL 15–30 — 100. 130. — 10 10 — — — — —BAF 15–20 160. 330. — — 10 — — — — — —BAFH 15–20 180. 340. — — 22 — — — — — —BQD15–60 85. 270. 380. — — 65 — 14 — — 1470–100 200. 400. 490. — — 65 — — 14 — 1415–60 130. 360. 480. — 100 100 100 25 25 — 14NGB 70–100 210. 420. 540. — 100 100 100 25 25 — 14110–125 — 710. 910. — 100 100 100 25 25 — 1415–60 160. 440. 590. — 65 — — 22 — — —ED4 70–100 260. 520. 670. — — — 65 — 18 — 30110–125 — 880. 1120. — — — 65 — 18 — —15–60 — 460. 700. — — — 65 — 25 18 30ED6 70–100 — 600. 790. — — — 65 — 25 18 —110–125 — 1100. 1350. — — — 65 — 25 18 —15–60 320. 700. 880. — — — 65 — 25 18 30HED4 70–100 320. 860. 960. — — — 65 — 25 18 —110–125 — 1590. 1800. — — — 65 — 25 18 —15–60 — 700. 890. — — — 100 65 — — —HHED6 70–100 — 860. 990. — — — 100 42 42 — 30110–125 — 1600. 1810. — — — 100 — 42 — —QJ2 60–225 — 420. 880. 170. — — 10 — — — —QJH2 60–225 — 930. 1140. 170. — — 22 — — — —QJ2H 60–225 — 1080. 1410. 170. — — 42 — — — —HQJ2H 60–225 — — 1940. 170. — — 100 — — — —Branch Device LimitationsFor panels applied on systems requiring neutral connections,some limitations apply. By application rule (NEC 408.14) lightingand appliance panels are limited to 42 circuits installed. Eachovercurrent device pole counts as a circuit. Additional limitationsfor these panels are based on available neutral connections.Branch Neutral ConnectionsWire Range Max. Number of Connections Max. Amp #14-#6 26 65#14-1/0 28 125#6-350 kcmil 3 250(1) #4-600 kcmilor (2) #6-250 kcmil1 400PANELBOARDS10 1-Pole HED 4 15–30A Rated 65kA 35 through 100A Rated 25kA. Two pole breaker is one phase and neutral.Three pole is two phase and neutral. Based on 75 degree copper.NOTE: QJ Breakers are single mounted in unit space and take 6" of unit space. Limited to(4) per panel max. BL, HBL, BLH and BQD breakers are mounted in commonmountings in 3" or (6) pole increments. ED4, ED6, HED4 and HHED6 breakers aremounted in common mountings in 3" or (6) pole increments.10-26Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

PanelboardsType P2 PanelboardsTypical Catalog NumbersSelectionMain Lugs OnlyMaximum Maximum Box Catalog Catalog CatalogPanel 1-Pole Height Number List Number List Number ListAmp Rating Circuits inches (mm) 3Ø4W 208Y/120V Price $ 1Ø3W 120/240V Price $ 3Ø4W 480Y/277V Price $18 26 (660) P2C18ML125ATS 940.00 P2A18ML125ATS 840.00 P2E18ML125ATS 990.00125 30 32 (813) P2C30ML125ATS 1140.00 P2A30ML125ATS 1060.00 P2E30ML125ATS 1270.0042 38 (965) P2C42ML125ATS 1360.00 P2A42ML125ATS 1250.00 P2E42ML125ATS 1550.0018 32 (813) P2C18ML250ATS 990.00 P2A18ML250ATS 910.00 P2E18ML250ATS 1090.00250 30 38 (965) P2C30ML250ATS 1200.00 P2A30ML250ATS 1100.00 P2E30ML250ATS 1380.0042 44 (1118) P2C42ML250ATS 1420.00 P2A42ML250ATS 1330.00 P2E42ML250ATS 1630.0018 38 (965) P2C18ML400ATS 1350.00 P2A18ML400ATS 1240.00 P2E18ML400ATS 1350.0040030 44 (1118) P2C30ML400ATS 1550.00 P2A30ML400ATS 1440.00 P2E30ML400ATS 1550.0042 50 (1270) P2C42ML400ATS 1780.00 P2A42ML400ATS 1710.00 P2E42ML400ATS 1780.0054 56 (1422) P2C54ML400ATS 1970.00 P2A54ML400ATS 1800.00 P2E54ML400ATS 1970.0018 38 (965) P2C18ML600ATS 1630.00 P2A18ML600ATS 1580.00 P2E18ML600ATS 1630.0060030 44 (1118) P2C30ML600ATS 1840.00 P2A30ML600ATS 1780.00 P2E30ML600ATS 1840.0042 50 (1270) P2C42ML600ATS 2070.00 P2A42ML600ATS 1950.00 P2E42ML600ATS 2070.0054 56 (1422) P2C54ML600ATS 2260.00 P2A54ML600ATS 2140.00 P2E54ML600ATS 2260.00Main Circuit Breaker18 26 (660) P2C18BL100ATS 1270.00 P2A18BL100ATS 1170.00 P2E18BQ100ATS 1660.00100 30 32 (813) P2C30BL100ATS 1510.00 P2A30BL100ATS 1380.00 P2E30BQ100ATS 1910.0042 38 (965) P2C42BL100ATS 1810.00 P2A42BL100ATS 1600.00 P2E42BQ100ATS 2450.0018 26 (660) P2C18NB125ATS 1710.00 P2A18NB125ATS 1490.00 P2E18NB125ATS 1980.00125 30 32 (813) P2C30NB125ATS 1920.00 P2A30NB125ATS 1710.00 P2E30NB125ATS 2240.0042 38 (965) P2C42NB125ATS 2190.00 P2A42NB125ATS 1930.00 P2E42NB125ATS 2780.0018 32 (813) P2C18QJ225ATS 2590.00 P2A18QJ225ATS 2140.00 P2E18FX225ATS 2770.00225 30 38 (965) P2C30QJ225ATS 2800.00 P2A30QJ225ATS 2370.00 P2E30FX225ATS 3060.0042 44 (1118) P2C42QJ225ATS 3020.00 P2A42QJ225ATS 2600.00 P2E42FX225ATS 3030.0018 38 (965) P2C18FX250ATS 2990.00 P2A18FX250ATS 2550.00 P2E18FX250ATS 3170.00250 30 44 (1118) P2C30FX250ATS 3200.00 P2A30FX250ATS 2780.00 P2E30FX250ATS 3470.0042 50 (1270) P2C42FX250ATS 3430.00 P2A42FX250ATS 3000.00 P2E42FX250ATS 3450.0018 50 (1270) P2C18JX400ATS 3490.00 P2A18JX400ATS 2930.00 P2E18JX400ATS 4380.0040030 56 (1422) P2C30JX400ATS 3710.00 P2A30JX400ATS 3140.00 P2E30JX400ATS 4610.0042 62 (1575) P2C42JX400ATS 4850.00 P2A42JX400ATS 3370.00 P2E42JX400ATS 4850.0054 68 (1727) P2C54JX400ATS 5080.00 P2A54JX400ATS 3600.00 P2E54JX400ATS 5080.0018 56 (1422) P2C18LX600ATS 6320.00 P2A18LX600ATS 5550.00 P2E18LX600ATS 6320.0060030 62 (1575) P2C30LX600ATS 6550.00 P2A30LX600ATS 5790.00 P2E30LX600ATS 6550.0042 68 (1727) P2C42LX600ATS 6780.00 P2A42LX600ATS 6010.00 P2E42LX600ATS 6780.0054 74 (1727) P2C54LX600ATS 7000.00 P2A54LX600ATS 6240.00 P2E54LX600ATS 7000.0010 PANELBOARDSDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-27

10PANELBOARDSPanelboardsType P2 Panelboard Modifications and AdditionsEnclosuresExtra Gutter toSides or Ends of the CanListDescription Price $6" end gutter . . . . . . . . . . . . . . . . . . . . . 235.2" side gutter . . . . . . . . . . . . . . . . . . . . . 200.Barrier in gutter (add to extragutter price) . . . . . . . . . . . . . . . . . . . . 200.24" wide . . . . . . . . . . . . . . . . . . . . . . . . . 235.Hinged trims . . . . . . . . . . . . . . . . . . . . . 160.Piano hinged trims . . . . . . . . . . . . . . . . 360.Door-in-door trims . . . . . . . . . . . . . . . . 360.Screw to the box trims . . . . . . . . . . . . . 160.Trim mounted devices . . . . . . .See page 10–72• Pilot lights• Toggle switches• Push buttons(Devices mounted and wired to the trim shouldalso have hinged trim specified)Painted boxes . . . . . . . . . . . . See page 10–72Custom colors . . . . . . . . . . . See painted boxesIncrease gauge trimsand boxes . . . . . . . . . . . . . See page 10–72Stainless steel trimsand boxes, Type 1 . . . . . . See page 10–72Aluminum trimsand boxes, Type 1 . . . . . . See page 10–72Meters(Contact sales for pricing and applicationengineering for space requirements)Panel Skirts See page 10-73Special LocksTEY . . . . . . . . . . . . . . . . . . . . . . . . . . . 235.TEU1 . . . . . . . . . . . . . . . . . . . . . . . . . . 255.Cat 60 . . . . . . . . . . . . . . . . . . . . . . . . . 235.LL803 . . . . . . . . . . . . . . . . . . . . . . . . . 235.LL806 . . . . . . . . . . . . . . . . . . . . . . . . . 235.Yale 47 (NYC) . . . . . . . . . . . . . . . . . . . 425.Panel Bus ModificationsCatalogAmperes RatingMain Bus Number 125A 250A 400A 600A750 A/SI AL. B 190. 190. 340. 645.Copper (tin pltd.) F 340. 340. 910. 1335.Copper (silver pltd.) E 455. 455. 475. 1220.1000 A/SI Copper(tin pltd.)G 730. 730. 1020. 2110.1000 A/SI Copper(silver pltd.)H 1070. 1070. 1240. 2355.Subfeed, Feed-Thru and Split BusUnitAmpere List Price $ Connector SpaceRating 3-Pole 2-Pole Cu/Al Wire Range (inches)Subfeed (Double) Lugs for Main LugPanelboards Only100/125 85. 85. (2)—#12 AWG-2/0 3kcmil225/250 85. 85. (2)—#6 AWG-350kcmil 6400 235. 235. (4)—250 kcmil 12(2)—600 kcmilFeed-Thru Lugs — Cannot Be Used inConjunction with TVSS or SubfeedBreakers100/125 190. 160. (1)—#12 AWG-2/0 3kcmil225/250 190. 160. (1)—#6 AWG-350kcmil 6400 490. 445. (2)—250 kcmil(1)—600 kcmil 9600 720. 680. (2)—250-500 kcmil 12Split BusRequires feed thru lugs also to feed subpanel section and for space requirements.100/125 245. 180. (1)—#12 AWG-2/0 9kcmil225/250 245. 180. (1)—#6 AWG-350kcmil 9(2)—250 kcmil400 490. 445. (1)—600 kcmil 12600 720. 680. (2)—250-500 kcmil 15Contactor Mains or SubmainSee Page 10-71• Asco 920 through 225 amps – adds12" unit space as main, 15" unitspace as submain• Asco 911 through 150 amps – adds21" unit space• Siemens LEN through 30 amps –adds 12" unit space, makes box 10" deepBranch and Main Breaker AccessoriesSee breaker section of this catalog.• Handle blocks• Handle locks• Aux. Contacts • UVR Increase Capacity Neutral up to 200%Main Bus Amps List Price Adder $125 340.250 530.400 560.600 625.See page 10-29 for unit space addersand compatibility with other options.Copper MLO OnlySelectionMain Bus Amps List Price Adder $125 115.250 190.400 285.600 285.Bus mounted TVSS. . . . . . see section 9Service Entrance LabelType P2 Panelboards are factory labeledsuitable for use as service entranceequipment when NEC requirements are met.A panelboard cannot have more than sixmain disconnects, unless it is a lighting andappliance branch panelboard. Lighting andappliance branch panelboards are limited totwo main disconnects.Grounding of PanelboardsGround Bars except for brazed to box areshipped with the panel interior factorymounted.• Non-Insulated Equipment Ground Bar – STD• Copper Non-Insulated Ground Bar. . . . . . 40.• Al Insulated Equipment Ground Bar . . . . 40.• Cu Insulated Equipment Ground Bar . . . . 75.• Ground Bar Brazed to Box . . . . . . . . . . . 245.(recommended for painted boxes)Shunt Trip on Main or BranchBL, BLH, HBL, ED4, HED4, HED6,HHED6 uses 1" unit space for shunttrip. All others may be used on mains orsubfeeds. See breaker section for listprice adders.QJ2, QJ2-H, QJH2, HQJ2H, ED4, ED6, HED4,HED6, HHED6, FXD6, HFD6, JXD6, JD6, HJD6,HJXD6Time ClocksTime clocks may be mounted in a 23"enclosure to be cable connected to thepanel. Sangamo, Tork or Paragon timeclock can be supplied and mounted inpanelboard cabinet. Adds 12" to panelheight. Mounts in Sub-area.ListDescription Price $Time Clock (1 or 2-pole, singleor double throw contacts;3-pole, single throw)277V maximum with plain dial 1070.Options—Astronomical dial 210.An omitting device 75.Reserve power or carryover 2450.Space and mountingprovisions only 540.Subfeed Main Breaker PanelsDouble LugsRatings Amps Poles Mount Ht. List Price $1002575.21"3 620.2252635.21"3 670.4002760.18"3 825. Accessories on 1" pole breakers (BL, BQD, ED) will takeunit space.10-28Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

PanelboardsType P2 Panelboard Standard Modifications and AdditionsSelectionBox Size Additions for Optional FeaturesMain LugsMain Breakers125A 250A 400A 600A 125A 125A 125A 225A 225A 225A 250A 250A 400A 400A 600A 600AOptions Horiz. Horiz. Vert. Horiz. Vert. Horiz. Vert. Vert. JD CJD LD CLDBL, BQD,ED, NGB CED ED QJ QJ FD FD CFD*Min. Box Size 26" 32" 38" 38" 26" 32" 32" 32" 38" 38" 44" 50" 50" 62" 56" 62"200% Neutral 0 0 6 (all) 6 (all) 0 0 0 N/A 0 N/A 0 0 0 0 0 0(lug type)Std. Lugs 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0(100% Neut. PNL)CU Lugs (100% 6 6 6 0 N/A N/A 0 N/A 0 N/A 0 0 0 0 0 0Neut. PNL)Comp Lugs 6 6 6 6 N/A N/A 0 N/A 0 N/A 0 0 0 0 0 0(100% Neut. PNL)Feed-thruStandard Lugs 6 6 12 12 6 6 6 N/A 6 N/A 6 6 12 12 12 12Feed-thru Cu Lugs 6 6 12 N/A N/A N/A 6 N/A 6 N/A 6 6 12 12 N/A N/AFeed-thruComp Lugs 6 12 12 N/A N/A N/A 6 N/A 6 N/A 12 12 12 12 N/A N/ASubfeed StandardLugs 0 6 6 N/A — — — — — — — — N/A — — —Split Bus 6 6 6 6 6 6 6 N/A 6 N/A 6 6 6 6 6 6(1) FD Subfeed N/A 12 12 12 N/A N/A N/A N/A N/A 12 12 12 12 12 12 12(Horizontal Mtg.)(2) FD Subfeed N/A 24 24 24 N/A N/A N/A N/A N/A 24 24 24 24 N/A N/A N/A(Vertical Mtg.)TVSS 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12Split bus is paired with feed-thru lugs by default. Feed-thru lugs are to feed the section after the split.NOTE: N/A = OPTION NOT AVAILABLE*Min. Box Size, corresponding to 9" of Unit Space.Compression LugsStyleAmpRatingBreakerTypeCompressionConnectorsBox HeightAdditionList Price $3Ø4W 3Ø3W 1Ø3W 1Ø2W125 N/A (1)#6 - 350 kcmil Al/Cu 6 105. 75. 75. 65.250 N/A (1)#6 - 350 kcmil Al/Cu 6 105. 75. 75. 65.MLO(1) 400 - 600 kcmil Cu or400 N/A(2)#6 - 350 kcmil Al/Cu6 150. 115. 115. 95.600 N/A(2)#6 - 350 kcmil Cu or Cu/Al or400 - 600 kcmil Al/Cu6 200. 150. 150. 115.100ED4, ED6, HED4Box must go to 24" wide on CED6 breaker only(1)#14-2/0 AWG Cu or AlHHED6, CED6Add 6" to box height for NØ115. 85. 85. 85.225 QJ2, QJH2, QJ2H (1)#6 AWG - 350 kcmil Cu or Al Box must go to 24" wide 225. 180. 180. 180.Box must go to 24" wide for all breakers250 FXD6, HFD6, CFD6 (1)#6 AWG - 350 kcmil Cu or AlMainRequires an additional 6.0" box height225. 180. 180. 180.BreakerJD6, JXD6, HJD6,400 CJD6, SJD6, SHJD6, (2)#1/0 AWG - 500 kcmil Cu or Al 9 305. 235. 235. 235.SCJD6LD6, LXD6, HLD6,600 CJD6, SLD6, SHLD6, (2)#2/0 AWG - 500 kcmil Cu or Al 6 305. 235. 235. 235.SCLD6Alternate LugsStyle Amp Rating Breaker Type Compression Connectors Box Height Addition List Price $MLO 400 N/A(1) 250 - 750 kcmil or(2)#3/0 AWG - 250 kcmil Cu or Al6 275.JD6, JXD6, HJD6,Main Breaker 400 CJD6, SJD6, SHJD6, (1)#4/0 AWG - 750 kcmil Cu or Al 6 510.SCJD610 PANELBOARDSDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-29

PanelboardsType P2 Panelboard Connector ModificationsEnclosure ModificationsList Price Adder $Panel PanelWidth WidthDescription 20" 24"NEMA 3R enclosures 860. 1180.NEMA 3R/12 enclosures 1175. 1180.Gasket between trim 680. 900.and box (Type 1)SelectionNEMA-4 for Type P2Water Tight, Dust Tight, Steel Enclosure(consult plant for actual enclosure size)Box Height Enclosure Size List PriceInches H W D Adder $26 26 20 5.75 3920.32 32 20 5.75 4230.38 38 20 5.75 5330.44 44 20 5.75 6605.50 50 20 5.75 8015.56 56 20 5.75 16260.62 62 20 5.75 20545.68 68 20 5.75 24835.74 74 20 5.75 29340.NEMA-4X for Type P2Water Tight, Dust Tight and Corrosion Resistant(consult plant for actual enclosure size)Enclosure - Stainless Steel Enclosure - FiberglassBox Height and Steel with Epoxy Coating Size (inches) ListInches H W D H W D Price $26 26 20 5.75 30 24 8 9000.32 32 20 5.75 36 24 8 10145.38 38 20 5.75 48 36 12 12085.44 44 20 5.75 48 36 12 15805.50 50 20 5.75 60 36 12 18710.56 56 20 5.75 60 36 12 20265.62 62 20 5.75 72 36 8 23710.68 68 20 5.75 72 36 8 27435.74 74 20 5.75 84 36 8 31155.Remote Switch Modifications (see page 10-71)Application For Remote SwitchSwitch Type Modification920 Adds 12" to unit space911≤ 225A Adds 21" unit space >225 ≤400 Amps Add 10" to width and 8" DPminimum and 24" to height30A Adds 15" to unit spaceLEN>30A 100 Adds 12" to unit space7.7 Dp. Box min.100 A ≤ 200 Adds 12" to unit space and 10" Dp. min.PANELBOARDS1010-30Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

PanelboardsType P2 Panelboard Kits and AccessoriesStandard EnclosuresSelectionCatalog NumberBox Type 1HeightStandard TrimInches Box Surface Flush Type 3R Type 3R/1226 B26 S26B F26B NR26 WP2632 B32 S32B F32B NR32 WP3238 B38 S38B F38B NR38 WP3844 B44 S44B F44B NR44 WP4450 B50 S50B F50B NR50 WP5056 B56 S56B F56B NR56 WP5662 B62 S62B F62B NR62 WP6268 B68 S68B F68B NR68 WP6874 B74 S74B F74B NR74 WP74Options For Type 1 TrimsItems must be ordered as manual line item on SpartanburgHinged trim – Replace “B” suffix with “H”Door-in-door – Replace “B” suffix with “D”Metal card holder – Replace “B” suffix with “M” on standard trim, add “M” suffix on optional trimsOption For 24" Wide Enclosures with Equal Gutter on Both Sides24" wide with equal gutter on both sides - Add “24” as prefixBreaker Kits and AccessoriesKit Number Description Contents List Price $BBKB32 BL/BQD 6-pole 3" branch breaker kit Kit contains top barrier, (3) A/C connectors, (1) B connector, hardware 85.00BBKED32 ED 6-pole 3" branch breaker kit Kit contains breaker support, inter-phase barriers, (3) A/C connectors, 90.00(1) B connector, hardwareBBKNB32 NGB 6-pole 3" branch breaker kit Kit contains top barrier, (3) A/C connectors, (1) B connector, hardware 90.00BBKQ1 QJ branch breaker kit for 2 and Kit to contain all connectors and cover plates necessary 102.003-pole single mountto mount both 2 and 3-pole breakersDFK1 BL, BQD, ED deadfront kit for Center strips 3", 6", 9," 15," 21" plus mounting hardware 90.001" pole breakersDFFP3 Deadfront filler 3" 3" empty space filler and hardware 45.00DFFP6 Deadfront filler 6" 6" empty space filler and hardware 51.00BNK2 Branch neutral (P2) Three tier lug with mounting hardware to increase neutral capacity 45.00P2BK1 P2 250A max. Bonding Kit Bonding strap and hardware 23.00P2BK2 P2 400A max. Bonding Kit Bonding strap and hardware 23.00P2BK3 P2 600A max. Bonding Kit Bonding strap and hardware 23.0010 PANELBOARDSDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-31

PanelboardsType P2 PanelboardsDimensionsType 1 BoxBox is symmetricalBox To WallMounting Holes2 in.[ 51 ].31 in.[ 8 ]4.63 in.[ 118 ]MountingDimpleInterior To BoxMountingStubs26 in. 32 in. 38 in. 44 in. 50 in.[ 660 ] [ 816 ] [ 965 ] [ 1118 ] [ 1270 ]56 in. 62 in. 68 in. 74 in.[ 1422 ] [ 1575 ][ 1727 ] [ 1880 ]4.63 in.[ 118 ]12.63 in.[ 321 ]15 in.[ 381 ]20 in.[ 508 ]2 in.[ 51 ]5.75 in.[ 146 ]Type 3R and 3R/12 Box7.5 in.[ 191 ].50 in.[ 13 ]2 in.[ 51 ]26 in. 32 in. 38 in. 44 in. 50 in.[ 660 ] [ 816 ] [ 965 ] [ 1118 ] [ 1270 ]56 in. 62 in. 68 in. 74 in.[ 1422 ] [ 1575 ] [ 1727 ] [ 1880 ]2 in.[ 51 ]MountingBracket2 in.[ 51 ]10PANELBOARDS20 in.[ 508 ]21.5 in.[ 546 ]23.5 in.[ 597 ]1 in.[25]5.75 in.[ 146 ] Dimensions are interior of the box. Add 5/8" to width for absolutedimension. Add 1/8" to height for absolute dimension.Dimensions shown in inches and millimeters [ ].10-32Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

PanelboardsType P3 PanelboardsFeaturesAnother innovation from Siemens isthe P3 panel. It is a smaller, footprintdistribution panel to fit a large numberof applications that require more (orlarger) branch devices than the lightingpanel class offer. This panel offers awide array of factory-assembledoptions, and has the ability to mixbreaker frames in unit space up to250 amps. Bussing options for the P3vary from the standard temperaturealuminum to temperature rated copper,750 A/Si aluminum, and 1000A/Sicopper designs. All bussing in the P3panel is tin-plated as a standard.Silver-plated copper is offered as anoption on a copper bus. Integratedtime clocks, bus mounted contactors,as mains or sub mains, split bus andsubfeed lugs (up to 400 amp) are just afew of the options of this unique panel.The P3 panel configurations, defined bythe unit space, allow for a givenamperage, main device, and box height.The P3 panel starts with a 56" high box.Breaker unit space can be mixed andmatched to meet customerrequirements. All 1" pole breakers (BL,BQD, ED frames) are mounted in 3" or6" pole increments. Breakers frames,above 125 amps, are mounted in 6"single or twin breaker mountings. As anexample panel, FD 250 amp and JD 400amp breakers are mounted as subfeedbreakers outside of unit space.Like other distribution panels, the P3panel can have blank space added intothe panel to allow for future expansionsor modifications. Any expansions ormodifications must be in 3" increments.BL, BQD and ED frame breakers have3" or 6-pole kits and can be mixed inunit space by these increments.Breakers of the same frame can crossfrom one mounting to another ifcontiguous. QJ frame breakers aremounted in 6" increments for two andthree pole single and twin mountedunits. Changes in the unit space lengthfor BL, BQD, or ED frame breakersrequire an additional deadfront centerstrip kit. Check with sales or the factoryfor additional unit space kits.Main Lug/Main BreakerEnclosure – Standard Type 1 enclosureis 24" wide x 7.75" deep. X Box Heightis determined by main device and unitspace. See charts for box height.Voltage – 600V AC max.250V DC max.Amperage – 800 amp max.Short Circuit Rating – 200 Kaic max.symmetrical or equal to the lowestrated device installed unless a seriesrating is indicated. Panels with subfeedor feed-thru lugs without a main device,circuit breaker or fusible unit, are limitedto a three-cycle rating. The three-cyclerating for the P3 panel is limited to 22Kaic. Note that the main device may bemounted remote from the panel.Bussing – The P3 panel has moreoptions to meet market requirements.The standard bussing is temperaturerated aluminum. The rating is per therequirements of UL 67 – the standardfor panelboards. All aluminum bussingis tin-plated. Optional bussing for the P3panel is: 750 A/si aluminum,temperature rated copper, and 1000A/si copper. The copper bus optionfor this panel is tin-plated.Weight – ApproximateTotal panelboard weight when filledwith a normal quantity of breakers andaccessories is about 5 lbs. (1 kg) perinch (54g per mm) of box height.Gauge Steel of Boxes Fronts,Surface & FlushDimensions in inches (mm) Gauge SteelWidth Height Box Front24" 56 - 80" #16 #14(610) (1422, 2032)General10 PANELBOARDSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-33

PanelboardsType P3 PanelboardsPanel Unit Space To Box Height RequirementsSelection/DimensionsP3 Panels With Standard Line Lugs. Unit Space (starting with 9" and adding 6" increments) “A” DimensionMain LugsMain Breakers“B” 250A 250ADimension Horiz. Vert. 250A 400A 400A 600A 600ABox Height 250A 400A 600A 800A FD FD CFD JD CJD LD CLD56 27 21 21 21 21 15 9 9 — 9 —62 33 27 27 27 27 21 15 15 9 15 968 39 33 33 33 33 27 21 21 15 21 1574 45 39 39 39 39 33 27 27 21 27 2180 51 45 45 45 45 39 33 33 27 33 27Main Breaker Wire BendingBreakerFrame C E FFD Horiz. 7.25 — 20.13FD Vert. — 12.25 25.38CFD — 13.63 31.38JD — 15.63 29.38CJD — 14.75 35.38LD — 14.75 29.38CLD — 14.00 35.38Main Lug Wire BendingPanel Amps Standard Connectors C D250 (1) #6 AWG - 350 kcmil 10.75 13.50400 (2) #3/0 AWG - 250 kcmil 16.00 17.88or (1) 600 kcmil600 (2) #3/0 AWG - 500 kcmil 16.00 17.88800 (2) 600 kcmil 16.00 17.88 This lug is removable.Main Breaker Wire Bending DiagramBranch BreakerSide Gutters Inches (mm)ReferencePanelLetter Width 24" (609)A 7.750 (197)B 7.125 (181)C 6.000 (152)D 7.000 (178)E 5.000 (127)F 6.625 (168)G 5.750 (144) Single branch mounting construction.Main Lug Wire Bending DiagramBranch Breaker Wire Bending DiagramBox depth = 7.75 in. (197 mm)Box width = 24 in. (610 mm)Main Breaker Wire BendingABCD/EFGBL, BLH, HBLBLF, BLFHBQD, BQD6ED, ED4, ED6HED4, HHED6QJ2, QJH2,QJ2-H, HQJ2HNGBNEB, HEBBL, BLH, HBLBLF, BLFHBQD, BQD6ED, ED4, ED6HED4, HHED6QJ2, QJH2,QJ2-H, HQJ2HNGBNEB, HEBABCD/EFGBox depth = 7.75 in. (197 mm)Box width = 24 in. (610 mm)Main Lug Wire BendingPanel Width24 in. (610 mm)Branch Breaker Side GuttersPANELBOARDS1010-34Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

PanelboardsType P3 PanelboardsSelectionAlternate Main BreakersMaximum InterruptingRef.Ampere BreakerRating (kA)CatalogList Price Adder $Rating Type 240V 480V 600V Number 240V AC 480V AC 600V AC Available Trip ValuesFD6 65 35 18 FD STD STD STD 70, 80, 90, 100, 110, 125, 150, 200, 225, 250FXD6 65 35 18 FX STD STD STD 70, 80, 90, 100, 110, 125, 150, 200, 225, 250250 HFD6 100 65 25 HF 1900. 1900. 1900. 70, 80, 90, 100, 110, 125, 150, 200, 225, 250HFXD6 100 65 25 H2 1900. 1900. 1900. 70, 80, 90, 100, 110, 125, 150, 200, 225, 250CFD6 200 150 100 CF 2770. 2770. 2770. 70, 80, 90, 100, 110, 125, 150, 200, 225, 250JXD6 65 35 25 JX STD STD STD 200, 225, 250, 300, 350, 400JD6 65 35 25 J6 STD STD STD 200, 225, 250, 300, 350, 400HJXD6 100 65 35 H6 2060. 2060. 2060. 200, 225, 250, 300, 350, 400400HJD6 100 65 35 H5 2060. 2060. 2060. 200, 225, 250, 300, 350, 400SJD6 65 35 25 SJ 2480. 2480. 2480. 200, 300, 400SHJD6 100 65 35 S2 2820. 2820. 2820. 200, 300, 400CJD6 200 200 100 CJ 3000. 3000. 3000. 200, 300, 400SCJD6 200 200 100 SC 4950. 4950. 4950. 200, 300, 400LXD6 65 35 25 LX STD STD STD 450, 500, 600LD6 65 35 25 L6 STD STD STD 250, 300, 350, 400, 450, 500, 600HLXD6 100 65 35 HL 2060. 2060. 2060. 250, 300, 350, 400, 450, 500, 600600HLD6 100 65 35 HO 2060. 2060. 2060. 250, 300, 350, 400, 450, 500, 600SLD6 65 35 25 SL 2820. 2820. 2820. 300, 400, 500, 600SHLD6 100 65 35 S6 4890. 4890. 4890. 300, 400, 500, 600CLD6 200 150 100 CL 4320. 4320. 4320. 300, 400, 500, 600SCLD6 200 150 100 C6 5790. 5790. 5790. 300, 400, 500, 600 Vertically mounted10 PANELBOARDSDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-35

PanelboardsType P3 PanelboardsBranch Circuit BreakersSelectionMax. Bolt-On ProvisionsAmp Breaker List Price $ for Maximum Interrupting Rating (kA)Rating Type Amps 1-Pole 2-Pole 3-Pole Future $ 120V AC 120/240V AC 240V AC 277V AC 480V AC 600V AC 250V DC15–60 25. 45. 140. — 10 — — — — — —BL 70 35. 85. 190. — — 10 — — — — —80–100 — 140. 210. — — — 10 — — — —15–60 35. 85. 220. — — 22 — — — — —BLH 70 75. 130. 300. — — 22 — — — — —80–100 — 200. 310. — — — 22 — — — —HBL15–55 85. 270. 380. — — 65 — — — — —60–100 — 400. 490. — — — 65 — — — —BL, (HID) 15–30 45. 75. — — 10 — — — — — —15–60 — 110. — — — — 10 — — — —BLR (240V)70–100 — 190. — — — — 10 — — — —10015–30 220. 330. — — 10 — — — — — —BLE (GFCI)40–60 — 330. — — — 10 — — — — —15–30 420. — — — 22 — — — — — —BLEH (GFCI)15–60 — 530. — — — 22 — — — — —15–30 140. 240. — — 10 — — — — — —BLF (GFCI)40–60 — 250. — — — 10 — — — — —15–30 160. 280. — — 22 — — — — — —BLHF (GFCI)40–60 — 300. — — — 22 — — — — —BGL 15–30 — 100. 130. — 10 — — — — — —BAF 15–20 160. 330. — — 10 — — — — — —BAFH 15–20 180. 340. — — 22 — — — — — —15–60 85. 270. 380. — — 65 — — 14 — 14BQD70–100 — 400. 490. — — — 65 — 14 — 1415–60 130. 360. 480. — 100 100 100 25 25 — 14NGB 70–100 210. 420. 540. — 100 100 100 25 25 — 14110–125 — 710. 910. — 100 100 100 25 25 — 1415–60 250. 370. 560. — 85 85 85 35 35 22 35NEB 70–100 250. 490. 640. — 85 85 85 35 35 22 35110–125 460. 890. 1090. — 85 85 85 35 35 22 3515–60 380. 560. 710. — 100 100 100 65 65 25 42HEB 70–100 380. 690. 780. — 100 100 100 65 65 25 42110–125 1160. 1280. 1450. — 100 100 100 65 65 25 4215–60 160. 440. 590. — 65 — — 22 — — —125 ED4 70–100 260. 520. 670. — — — 65 — 18 — 30110–125 — 880. 1120. — — — 65 — 18 — —15–60 — 460. 700. — — — 65 — 25 18 30ED6 70–100 — 600. 790. — — — 65 — 25 18 —110–125 — 1100. 1350. — 100 — — — — — —15–60 490. 850. 950. — 100 — — — — — —HED4 70–100 490. 950. 1070. — — — — 65 — — —110–125 — 1750. 1970. — — — — 65 — — —15–60 — 860. 960. — — — 100 42 42 — 30HHED6 70–100 — 960. 1090. — — — 100 42 42 — 30110–125 — 1760. 1990. — — — 100 — 42 — —QJ2 60–225 — 420. 880. 170. — — 10 — — — —225QJH2 60–225 — 930. 1140. 170. — — 22 — — — —QJ2H 60–225 — 1080. 1410. 170. — — 42 — — — —HQJ2H 60–225 — — 1940. 170. — — 100 — — — —Subfeed BreakersMounting PositionWhen Used as Provisions Ampere Maximum Interrupting RatingBreaker Subfeed Breaker List Price $ for Ratings (kA) SymmetricalType Vertical 2-Pole 3-Pole Future $ For Load 240V AC 480V AC 600V ACFD6 , FXD6 Twin 1220. 1540. 220.-- 70–250 65 35 18HFD6 ,HFXD6 Twin 2440. 3010. 220.-- 70–250 100 65 25JD6 , JXD6 Single 1720. 2180. 290.-- 200–400 65 35 25HJD6 , HJXD6 Single 3160. 4220. 290.-- 200–400 100 65 35Neutral ConnectorsMax.Number of Max.Wire Range Connections Amps #14-#1/0 44 125#14-3/0 12 200#4 - 350 kcmil 6 250(1)#4 - 600 kcmil or(2)#6 - 250 kcmil1 40010PANELBOARDSBranch Device LimitationsFor panels applied on systems requiringneutral connections, some limitations BGL 2-pole is (1) phase and neutral 3-pole is (2)phases and neutral.NOTE:QJ Breakers are twin mounted in unit space andtake 6" of unit space. Limited to (6) per panelmax. BL, HBL, BLH and BQD breakers aremounted in common mountings in 3" or (6) poleincrements. ED2, ED4, ED6, HED4 and HHED6apply. By application rule (NEC 408.14),lighting and appliance panels are limitedto 42 circuit installed. Each overcurrentbreakers are mounted in common mountings in3" or (6) pole increments. Twin mounted subfeed breakers are mounted atbottom of panelboard only and adds 24" to thepanel height. Subfeed breaker is mounted at bottom of panelboardonly. 400 amp subfeed breaker adds 30" to the panelheight.device pole counts as a circuit. Additionallimitations for these panels are based onavailable neutral connections.10-36Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

PanelboardsType P3 PanelboardsTypical Catalog NumbersMain Lugs Only – shown with aluminum bus, top fed, and surface trimsSelection208Y/120V 240/120V 120/240V or250V DC Max.Maximum 3-Phase, 4-Wire 3-Phase, 4-Wire 1-Phase, 3-WirePanel Amp Rating Unit Space (inches) Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $27 P3C56ML250ATS 1760.00 P3B56ML250ATS 1760.00 P3A56ML250ATS 1660.0033 P3C62ML250ATS 1980.00 P3B62ML250ATS 1980.00 P3A62ML250ATS 1890.00250 39 P3C68ML250ATS 2220.00 P3B68ML250ATS 2220.00 P3A68ML250ATS 2110.0045 P3C74ML250ATS 2440.00 P3B74ML250ATS 2440.00 P3A74ML250ATS 2330.0051 P3C80ML250ATS 2660.00 P3B80ML250ATS 2660.00 P3A80ML250ATS 2570.0021 P3C56ML400ATS 2120.00 P3B56ML400ATS 2120.00 P3A56ML400ATS 2050.0027 P3C62ML400ATS 2350.00 P3B62ML400ATS 2350.00 P3A62ML400ATS 2270.00400 33 P3C68ML400ATS 2580.00 P3B68ML400ATS 2580.00 P3A68ML400ATS 2490.0039 P3C74ML400ATS 2800.00 P3B74ML400ATS 2800.00 P3A74ML400ATS 2720.0045 P3C80ML400ATS 3020.00 P3B80ML400ATS 3020.00 P3A80ML400ATS 2950.0021 P3C56ML600ATS 2410.00 P3B56ML600ATS 2410.00 P3A56ML600ATS 2290.0027 P3C62ML600ATS 2630.00 P3B62ML600ATS 2630.00 P3A62ML600ATS 2510.00600 33 P3C68ML600ATS 2850.00 P3B68ML600ATS 2850.00 P3A68ML600ATS 2730.0039 P3C74ML600ATS 3080.00 P3B74ML600ATS 3080.00 P3A74ML600ATS 2970.0045 P3C80ML600ATS 3310.00 P3B80ML600ATS 3310.00 P3A80ML600ATS 3190.0021 P3C56ML800ATS 2850.00 P3B56ML800ATS 2850.00 P3A56ML800ATS 2730.0027 P3C62ML800ATS 3080.00 P3B62ML800ATS 3080.00 P3A62ML800ATS 2970.00800 33 P3C68ML800ATS 3310.00 P3B68ML800ATS 3310.00 P3A68ML800ATS 3190.0039 P3C74ML800ATS 3530.00 P3B74ML800ATS 3530.00 P3A74ML800ATS 3410.0045 P3C80ML800ATS 3760.00 P3B80ML800ATS 3760.00 P3A80ML800ATS 3640.00240V 408Y/277V 480V Maximum 3-Phase, 3-Wire 3-Phase, 4-Wire 3-Phase, 3-WirePanel Amp Rating Unit Space (inches) Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $27 P3D56ML250ATS 1660.00 P3E56ML250ATS 1970.00 P3F56ML250ATS 1660.0033 P3D62ML250ATS 1890.00 P3E62ML250ATS 2200.00 P3F62ML250ATS 1890.00250 39 P3D68ML250ATS 2110.00 P3E68ML250ATS 2430.00 P3F68ML250ATS 2110.0045 P3D74ML250ATS 2330.00 P3E74ML250ATS 2650.00 P3F74ML250ATS 2330.0051 P3D80ML250ATS 2570.00 P3E80ML250ATS 2880.00 P3F80ML250ATS 2570.0021 P3D56ML400ATS 2050.00 P3E56ML400ATS 2120.00 P3F56ML400ATS 2050.0027 P3D62ML400ATS 2270.00 P3E62ML400ATS 2350.00 P3F62ML400ATS 2270.00400 33 P3D68ML400ATS 2490.00 P3E68ML400ATS 2580.00 P3F68ML400ATS 2490.0039 P3D74ML400ATS 2720.00 P3E74ML400ATS 2800.00 P3F74ML400ATS 2720.0045 P3D80ML400ATS 2950.00 P3E80ML400ATS 3020.00 P3F80ML400ATS 2950.0021 P3D56ML600ATS 2290.00 P3E56ML600ATS 2410.00 P3F56ML600ATS 2290.0027 P3D62ML600ATS 2510.00 P3E62ML600ATS 2630.00 P3F62ML600ATS 2510.00600 33 P3D68ML600ATS 2730.00 P3E68ML600ATS 2850.00 P3F68ML600ATS 2730.0039 P3D74ML600ATS 2970.00 P3E74ML600ATS 3080.00 P3F74ML600ATS 2970.0045 P3D80ML600ATS 3190.00 P3E80ML600ATS 3310.00 P3F80ML600ATS 3190.0021 P3D56ML800ATS 2730.00 P3E56ML800ATS 2850.00 P3F56ML800ATS 2730.0027 P3D62ML800ATS 2970.00 P3E62ML800ATS 3080.00 P3F62ML800ATS 2970.00800 33 P3D68ML800ATS 3190.00 P3E68ML800ATS 3310.00 P3F68ML800ATS 3190.0039 P3D74ML800ATS 3410.00 P3E74ML800ATS 3530.00 P3F74ML800ATS 3410.0045 P3D80ML800ATS 3640.00 P3E80ML800ATS 3760.00 P3F80ML800ATS 3640.0010 PANELBOARDS For 600V, change “F” in position 3 to “G.” Price onlybranch breakers with 600V ratings.Discount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-37

PanelboardsType P3 PanelboardsTypical Catalog NumbersSelectionMain Circuit Breaker – shown with aluminum bus, top fed, and surface trims120/240V or208Y/120V 240/120V 250V DC MaxMaximum 3-Phase, 4-Wire 3-Phase, 4-Wire 1-Phase, 3-WirePanel Amp Rating Unit Space (inches) Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $21 P3C56FD250ATS 3430.00 P3B56FD250ATS 3430.00 P3A56FD250ATS 3540.0027 P3C62FD250ATS 3660.00 P3B62FD250ATS 3660.00 P3A62FD250ATS 3770.00250 33 P3C68FD250ATS 3880.00 P3B68FD250ATS 3880.00 P3A68FD250ATS 4000.0039 P3C74FD250ATS 4110.00 P3B74FD250ATS 4110.00 P3A74FD250ATS 4220.0045 P3C80FD250ATS 4340.00 P3B80FD250ATS 4340.00 P3A80FD250ATS 4450.009 P3C56JD400ATS 3830.00 P3B56JD400ATS 3830.00 P3A56JD400ATS 3260.0015 P3C62JD400ATS 4050.00 P3B62JD400ATS 4050.00 P3A62JD400ATS 4720.00400 21 P3C68JD400ATS 5190.00 P3B68JD400ATS 5190.00 P3A68JD400ATS 4940.0027 P3C74JD400ATS 5420.00 P3B74JD400ATS 5420.00 P3A74JD400ATS 5180.0033 P3C80JD400ATS 5650.00 P3B80JD400ATS 5650.00 P3A80JD400ATS 5410.009 P3C56LD600ATS 6660.00 P3B56LD600ATS 6660.00 P3A56LD600ATS 6260.0015 P3C62LD600ATS 6890.00 P3B62LD600ATS 6890.00 P3A62LD600ATS 6500.00600 21 P3C68LD600ATS 7120.00 P3B68LD600ATS 7120.00 P3A68LD600ATS 6720.0027 P3C74LD600ATS 7340.00 P3B74LD600ATS 7340.00 P3A74LD600ATS 6950.0033 P3C80LD600ATS 7570.00 P3B80LD600ATS 7570.00 P3A80LD600ATS 7180.00240V 408Y/277V 480V Maximum 3-Phase, 3-Wire 3-Phase, 4-Wire 3-Phase, 3-WirePanel Amp Rating Unit Space (inches) Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $21 P3D56FD250ATS 3340.00 P3E56FD250ATS 3450.00 P3F56FD250ATS 3540.0027 P3D62FD250ATS 3570.00 P3E62FD250ATS 3670.00 P3F62FD250ATS 3770.00250 33 P3D68FD250ATS 3790.00 P3E68FD250ATS 3890.00 P3F68FD250ATS 4000.0039 P3D74FD250ATS 4020.00 P3E74FD250ATS 4120.00 P3F74FD250ATS 4220.0045 P3D80FD250ATS 4240.00 P3E80FD250ATS 4350.00 P3F80FD250ATS 4450.009 P3D56JD400ATS 4090.00 P3E56JD400ATS 5190.00 P3F56JD400ATS 3260.0015 P3D62JD400ATS 3850.00 P3E62JD400ATS 4940.00 P3F62JD400ATS 4720.00400 21 P3D68JD400ATS 4090.00 P3E68JD400ATS 5190.00 P3F68JD400ATS 4940.0027 P3D74JD400ATS 4310.00 P3E74JD400ATS 5420.00 P3F74JD400ATS 5180.0033 P3D80JD400ATS 4540.00 P3E80JD400ATS 5650.00 P3F80JD400ATS 5410.009 P3D56LD600ATS 6260.00 P3E56LD600ATS 6660.00 P3F56LD600ATS 6260.0015 P3D62LD600ATS 6500.00 P3E62LD600ATS 6890.00 P3F62LD600ATS 6500.00600 21 P3D68LD600ATS 6720.00 P3E68LD600ATS 7120.00 P3F68LD600ATS 6720.0027 P3D74LD600ATS 6950.00 P3E74LD600ATS 7340.00 P3F74LD600ATS 6950.0033 P3D80LD600ATS 7180.00 P3E80LD600ATS 7570.00 P3F80LD600ATS 7180.00 For 600V, change “F” in position 3 to “G.” Price onlybranch breakers with 600V ratings.PANELBOARDS1010-38Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

PanelboardsType P3 Panelboard Modifications and AdditionsEnclosuresExtra Gutter toSides or Ends of the CanListDescription Price $6" end gutter . . . . . . . . . . . . . . . . . . . . . 235.2" side gutter . . . . . . . . . . . . . . . . . . . . . 200.Barrier in gutter (add to extragutter price) . . . . . . . . . . . . . . . . . . . . 200.Hinged trims . . . . . . . . . . . . . . . . . . . . . 160.Piano hinged trims . . . . . . . . . . . . . . . . 360.Door-in-door trims . . . . . . . . . . . . . . . . 360.Screw to the box trims . . . . . . . . . . . . . 160.Trim mounted devices . . . . . . .See page 10–72• Pilot lights• Toggle switches• Push buttons(Devices mounted and wired to the trim shouldalso have hinged trim specified)Painted boxes . . . . . . . . . . . . See page 10–72Custom colors . . . . . . . . . . . See painted boxesIncrease gauge trimsand boxes . . . . . . . . . . . . . See page 10–72Stainless steel trimsand boxes, Type 1 . . . . . . See page 10–72Aluminum trimsand boxes, Type 1 . . . . . . See page 10–72Meters(Contact sales for pricing and applicationengineering for space requirements)Panel Skirts See page 10-73Special LocksTEY . . . . . . . . . . . . . . . . . . . . . . . . . . . 235.TEU1 . . . . . . . . . . . . . . . . . . . . . . . . . . 255.Cat 60 . . . . . . . . . . . . . . . . . . . . . . . . . 235.LL803 . . . . . . . . . . . . . . . . . . . . . . . . . 235.LL806 . . . . . . . . . . . . . . . . . . . . . . . . . 235.Yale 47 (NYC) . . . . . . . . . . . . . . . . . . . 425.Panel Bus ModificationsCatalogAmperes RatingMain Bus Number 125A 250A 400A 600A750 A/SI AL. B 190. 190. 340. 645.Copper (tin pltd.) F 340. 340. 910. 1335.Copper (silver pltd.) E 455. 455. 475. 1220.1000 A/SI Copper(tin pltd.)G 730. 730. 1020. 2110.1000 A/SI Copper(silver pltd.)H 1070. 1070. 1240. 2355.Subfeed, Feed-Thru and Split BusAmpereList Price $ConnectorRating 3-Pole 2-Pole Cu/Al Wire RangeSubfeed (Double) Lugs for Main LugPanelboards Only225/250 85. 85. (2)—#6 AWG-350kcmil400 235. 235. (2)—250 kcmil(1)—600 kcmilFeed-Thru Lugs — Cannot Be Used inConjunction with TVSS or SubfeedBreakersSee page 10-40 for unit space addersand compatibility with other options.225/250 190. 160. (1)—#6 AWG-350kcmil400 490. 445. (2)—250 kcmil(1)—600 kcmil600 720. 680. (2)—250-500 kcmil800 770. — (2)—600 kcmilSplit Bus225/250 245. 180. (1)—#6 AWG-350kcmil(2)—250 kcmil400 490. 445. (1)—600 kcmil600 720. 680. (2)—250-500 kcmil800 1435. 1390. (2)—600 kcmilBranch and Main Breaker AccessoriesSee page 10-70 and Breaker Section• Handle blocks• Handle locks• Aux. Contacts • UVR Increase capacity neutral up to 200%Main Bus Amps List Price Adder $125 340.250 530.400 560.600 625.See page 10-40 for unit space addersand compatibility with other options.Copper MLO OnlyMain Bus Amps List Price Adder $125 115.250 190.400 285.600 285.SelectionBus mounted TVSS. . . . . . . . . . . . See Section 9 for TPS1Service Entrance LabelType P3 Panelboards are factory labeledsuitable for use as service entranceequipment when NEC requirements are met.A panelboard cannot have more than sixmain disconnects, unless it is a lighting andappliance branch panelboard. Lighting andappliance branch panelboards are limited totwo main disconnects.Grounding of PanelboardsGround Bars except for brazed to box areshipped with the panel interior factorymounted.• Non-Insulated Equipment Ground Bar – STD• Copper Non-Insulated Ground Bar. . . . . . 40.• Al Insulated Equipment Ground Bar . . . . 40.• Cu Insulated Equipment Ground Bar . . . . 75.• Ground Bar Brazed to Box . . . . . . . . . . . 245.(recommended for painted boxes)Shunt Trip on Main or BranchSee breaker section for list priceadders. BL, BLH, HBL, BQD, ED4,HED4, ED6, HED6, HHED6, QJ2,QJ2H, QJH2, HQJ2H as branch only.BL, BLH, HBL, ED2, ED4, HED4, ED6,HED6, HHED6 uses 1" unit space forshunt trip. All others may be used onmains or subfeeds.QJ2, QJ2-H, QJH2, HQJ2H, ED4, ED6, HED4,HED6, HHED6, FXD6, HFD6, JXD6, JD6, HJD6,HJXD6Time ClocksTime clocks may be mounted in a 23"enclosure to be cable connected to thepanel. Sangamo, Tork or Paragon timeclock can be supplied and mounted inpanelboard cabinet. Adds 12" to panelheight. Mounts in Sub-area.ListDescription Price $Time Clock (1 or 2-pole, singleor double throw contacts;3-pole, single throw)277V maximum with plain dial 1070.Options—Astronomical dial 210.An omitting device 75.Reserve power or carryover 2450.Space and mountingprovisions only 540.10 PANELBOARDS Accessories on 1" pole breakers (BL, BQD, ED) will takeunit space.Discount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-39

PanelboardsType P3 Panelboard Standard ModificationsSelectionOption CombinationsSubfeed Feed-thru FD JD FD 200% Min. Box Unit SpaceAmps Incoming Lugs Lugs Subfeed Subfeed Subfeeds Neutral Size (in.) (in.)• — — — • 56 27Main Lug Only — — • — — • 56 15— — — • • 56 9• — — — • 56 21Main Lugs w/Subfeed Lugs • — • — — • 56 21250 — — — • • 62 9Main Breaker (Horiz. FD) —• — — — • 56 21— • — — • 56 9Main Breaker (Vert. FD) None Std. • — — — • 56 15Main Breaker (CFD)None Std.• — — — • 56 9— • — — • 68 9• — — — — • 56 21— • — — — • 56 15Main Lug Only — — • — — • 56 9— — — • — • 56 9— — — — • • 62 9— — — — • 56 9• — — — • 62 9400 Main Breaker (JD) None Std. — • — — • 68 9— — • — • 68 9— — — • • 74 9— — — — • 62 9• — — — • 74 9Main Breaker (CJD) None Std — • — — • 74 9— — • — • 74 9— — — • • 80 9— — — — • 56 21• — — — • 56 15Main Lug Only — — • — — • 56 9— — • — — 56 9— — — • • 62 9— — — — • 56 9• — — — • 62 9600 Main Breaker LD — — • — — • 68 9— — • — — 68 9— — — • • 74 9— — — — • 62 9• — — — • 68 9Main Breaker CLD — — • — — • 74 9— — • — — 74 9— — — • • 80 9— — — — • 56 21• — — — • 56 9800 Main Lug Only — — • — — • 56 9— — • — — 56 9— — — • • 62 910PANELBOARDS Subfed lugs are currently not offered as standard withmain circuit breakers. Subfed lugs on panels above 400A are not standard. 200% neutral cannot be provided along with a 400Asubfeed breaker because the breaker blocks the 4thlug site.10-40Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

PanelboardsType P3 Panelboard Connector ModificationsCompression LugsSelectionList Price $Amp Breaker Compression Box Height 3-Phase/ 3-Phase/ 1-Phase/ 1-Phase/Style Rating Type Connectors Addition 4-Wire 3-Wire 3-Wire 2-Wire250 N/A (1)#6 AWG - 350 kcmil — 105. 75. 75. 65.MLO400 N/A (1) 250 - 500 kcmil or — 150. 115. 115. 95.(2)# 1/0 AWG - 250 kcmil —600 N/A (2)#3/0 AWG - 500 kcmil — 200. 150. 150. 115.800 N/A (2) 400-750 kcmil Cu only — 265. 200. 200. 200.250 FXD6, HFD6, CFD6 (1)#6 AWG - 350 kcmil Cu or Al CFD6 requires an 225. 180. 180. 180.additional 6.0" box heightMain 400 JD6, JXD6, HJD6, (2)#1/0 AWG - 500 kcmil Cu or Al 6 305. 235. 235. 235.BreakerCJD6, SJD6, SHJD6, SCJD6600 LD6, LXD6, HLD6, CJD6, (2)#2/0 AWG - 500 kcmil Cu or Al 6 305. 235. 235. 235.SLD6, SHLD6, SCLD6Alternate LugsStyle Amp Rating Breaker Type Compression Connectors Box Height Addition List Price $MLO 400 N/A (1) 250 - 750 kcmil or 6 275.(2)#3/0 AWG - 250 kcmil Cu or Al800 N/A (2) 600 kcmil 6 390.Main Breaker 400 JD6, JXD6, HJD6, CJD6, (1)#4/0 AWG - 750 kcmil Cu or Al 6 305.SJD6, SHJD6, SCJD6Enclosure ModificationsList Price Adder $PanelWidthDescription 24"NEMA 3R enclosures 1175.NEMA 3R/12 enclosures 1175.Gasket between trim 890.and box (Type 1)NEMA-4 For Type P3Water Tight, Dust Tight, SteelEnclosure(consult plant for actual enclosure size)Box Height Enclosure Size ListInches H W D Price $56 56 24 7.75 16260.62 62 24 7.75 20545.68 68 24 7.75 24835.74 74 24 7.75 29340.80 80 24 7.75 29350.NEMA-4X For Type P3Water Tight, Dust Tight and Corrosion Resistant(consult plant for actual enclosure size)Enclosure - Stainless SteelEnclosure - FiberglassBox Height and Steel with Epoxy Coating Size (inches) ListInches H W D H W D Price $56 56 24 7.75 60 36 12 20265.62 62 24 7.75 66 36 8 23710.68 68 24 7.75 72 36 8 27435.74 74 24 7.75 78 36 8 31155.80 80 24 7.75 84 36 8 31610.Remote Switch Modifications (see page 10-71)Application For Remote SwitchSwitch TypeModification920 Adds 12" to unit space911≤ 225A Adds 21" unit space >225 ≤400 Amps Add 10" to width and 8" DPminimum and 24" to height30A Adds 15" to unit spaceLEN>30A ≤ 100 Adds 12" to unit space100 A ≤ 200 Adds 12" to unit space and 10" Dp. min.10 PANELBOARDSDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-41

PanelboardsType P3 Panelboard Kits and AccessoriesStandard EnclosuresCatalog NumberBox Type 1Height Standard Trim(in.) Box Surface Flush Type 3R Type 3R/1256 24WD56 P3S56 P3F56 24NRD56 24WPD5662 24WD62 P3S62 P3F62 24NRD62 24WPD6268 24WD68 P3S68 P3F68 24NRD68 24WPD6874 24WD74 P3S74 P3F74 24NRD74 24WPD7480 24WD80 P3S80 P3F80 24NRD80 24WPD80Options For Type 1 TrimsItems must be ordered as manual line item on factoryHinged trim – Add “H” suffixDoor-in-door – Add “D” suffixMetal card holder – Add “M” suffixSelectionBreaker Kits and AccessoriesKit Number Description Contents List Price $BBKB32 BL/BQD 6-pole 3" branch breaker kit Kit contains top barrier, (3) A/C connectors, (1) B connector, hardware 85.00BBKNB32 NGB 6-pole 3" branch breaker kit Kit contains top barrier, (3) A/C connectors, (1) B connector, hardware 90.00BBKEB32 NEB/HEB 6-pole 3" branch breaker kit Kit contains top barrier, (3) A/C connectors, (1) B connector, hardware 113.00BBKED32 ED 6-pole 3" branch breaker kit Kit contains breaker support, inter-phase barriers, (3) A/C connectors, (1) B connector, hardware 90.00BBKQ2Branch breaker kit for 2 and 3-poleQJ twin mountKit contains all connectors and cover plates necessary to mount both 2 and 3-pole breakers 350.00DFFP3 Deadfront filler 3" 3" empty space filler and hardware 45.00DFFP6 Deadfront filler 6" 6" empty space filler and hardware 51.00P3BK1 P3 bonding kit Bonding strap and hardware 23.00PANELBOARDS1010-42Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

PanelboardsType P3 PanelboardsDimensionsType 1 BoxBox is symmetricalBox To WallMounting Holes2 in.[ 51 ].31 in.[ 8 ]7.625 in.[ 199 ]MountingDimpleInterior To BoxMountingStubs56 in. 62 in. 68 in.[ 1422 ][ 1575 ][ 1727 ]74 in. 80 in.[ 1880 ] [ 2032 ]7.625 in.[ 199 ]12.63 in.[ 321 ]15 in.[ 381 ]24 in.[610]2 in.[ 51 ]7.75 in.[ 197 ]Type 3R and 3R/12 Box9.5 in.[ 241 ].50 in.[ 13 ]2 in.[ 51 ]56 in. 62 in. 68 in.[ 1422 ][ 1575 ][ 1727 ]74 in. 80 in.[ 1880 ] [ 2032 ]MountingBracket2 in.[ 51 ]2 in.[ 51 ]24 in.[ 610 ]25.5 in.[ 648 ]27.5 in.[ 699 ]1 in.[25]7.75 in.[ 146 ] Dimensions are interior of the box. Add 5/8" to width for absolutedimension. Add 1/8" to height for absolute dimension.Dimensions shown in inches and millimeters [ ].10 PANELBOARDSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-43

PanelboardsType P4 PanelboardsFeaturesThe P4 panel is a medium sized footprintdistribution panel to fit a large number ofapplications that require more or largerbranch devices and higher amp ratingsthan the lighting panel class offer. Evenwith the increased capacity, this panel isa space saver with its 32" width and 10"depth. The P4 panel offers a wide arrayof factory-assembled options and hasthe ability to mix breaker frames in unitspace up to 800 amps and fusibleswitches up to 200 amps. Bussingoptions for the P4 vary from the standardtemperature rated aluminum totemperature rated copper and 750A/Sialuminum and 1000A/Si copper designs.All aluminum bussing in the P4 panel istin-plated as a standard. Silver-plated isoffered as the default for copper bus andtin as an option. Integrated time clocks,bus mounted contactors as mains orsubmains, split bus and subfeed lugs (upto 600 amp) are just a few of the optionsof this flexible panel.The 4 panel configurations defined bythe unit space allowed for a givenamperage, main device and box height.The P4 panel starts with a 60" high box.All of the branch devices are unit spacemounted. Breakers and switches can bemixed and matched to meet customerrequirements.Main Lug / Main Breaker / MainSwitchEnclosure – Standard Type 1 enclosureis 32" wide x 10" deep. X Box Height isdetermined by main device and unitspace. See charts for box height.Voltage – 600V AC max.250V DC max.Amperage – 400-800 amp main breaker(check with factory on availability of 800amp), 400-1200 amp MLO, 100-200 ampmain switch.Short Circuit Rating – 200 KAIC max.symmetrical or equal to the lowest rateddevice installed unless a series rating isindicated. Panels with subfeed orfeed-thru lugs without a main device,circuit breaker or fusible unit, are limitedto a three-cycle rating. The three-cyclerating for the P4 panel is limited to 42KAIC. Note that the main device maybe mounted remote from the panel.Bussing – The P4 panel has moreoptions to meet market requirements.The standard bussing is temperaturerated aluminum. The rating is per therequirements of UL 67 – the standard forpanelboards. All aluminum bussing istin-plated. Optional bussing for the P4panel is: 750 A/Si aluminum, temperaturerated copper, and 1000 A/Si copper.The copper bus option for this panelis silver-plated.GeneralWeight – ApproximateTotal panelboard weight when filledwith a normal quantityof breakers and accessories is about 8lbs. (1 kg) per inch(54g per mm) of box height.Main Lugs Connectors Suitable forAmpere Rating Copper or Aluminum400 (1) - #3/0 AWG-500 kcmil(2) - #3/0 AWG-250 kcmil600 (2) - #3/0 AWG-500 kcmil800 (3) - #3/0 AWG-500 kcmil1000 (4) - #3/0 AWG-500 kcmil1200 (4) - #3/0 AWG-500 kcmil Alternate lugs for 750 kcmil cable are available, butresult in significant loss of branch unit mounting space.Consult Siemens.Gauge Steel of BoxesFronts, Surface and FlushDimensions ininches (mm) Gauge SteelWidth Height Box Fronts32" 60 - 75 - 90 #16 #14 (1 piece trim)(813) (1524, 1905, 14 Ga (4 piece trim)2286) Box has 16 gauge side panels and 12 gauge backsupport.Enclosure Selection Available Circuit Space in Inches (mm)Enclosure Dimension in Inches (mm)Dimension “C”H W D Main Lug Main Breaker Main SwitchType 1, 3R/12 400 / 800A 400 / 800A 100 / 200A60 (1524) 32 (813) 10 (254) 30 (762) 21.25 (540) 20 (508)75 (1905) 32 (813) 10 (254) 45 (1143) 36.25 (921) 35 (889)90 (2286) 32 (813) 10 (254) 60 (1524) 51.25 (1302) 50 (1270)Main Breaker Unit Space DimensionsDimensions in Inches (mm)Ampere Breaker NeutralRating Type A B400 JXD6, JD6, HJD6 10.42 (265)400–600 LXD6, LD6, HLD6, SJD6, SHJD6, SLD6, SHLD6 10.42 (265) 13.125 (333)800 LMD6, LMXD6 10.00 (265)10PANELBOARDSMain Switch ConnectorsAmpere Connectors suitable forRating Copper or Aluminum100 (1) #10-#1/0 AWG (Cu or Al)200 (1) #6 AWG-300 kcmil Standard trim is four piece without door. Surface or flush one piece trim is available for32 in. (813 mm) wide circuit breaker panel.10-44Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

PanelboardsType P4 PanelboardsMain Lugs Only Wire Bending SpaceDimensions in inches (mm)Main LugNeutral400A 600A 800A 1000A 1200A 400-600A 800-1200ALugs A B C D E F GStandard 16.500 16.750 15.969 15.969 15.969 13.125 13.125(419) (419) (406) (406) (406) (333) (333)Oversize 16.500 21.750 25.969 25.969 25.969 18.125 23.125(419) (552) (660) (660) (660) (460) (587)Crimp 19.187 18.250 18.687 18.250 18.250 15.937 15.937(487) (464) (475) (464) (464) (405) (405)Standard 16.750 15.969 — — — 13.125 13.125w/Subfeed (425) (406) (333) (333)Standard 16.500 16.750 — — — 13.125 13.125w/Feed-thru (419) (419) (333) (333)DimensionsBranch Switch Unit SpaceMain Lugs Only Unit SpaceMounting Height in inches (mm)Ampere Number Twin Single AC Cables Per Connectors Suitable forRating of Poles Mounted Mounted Voltage Connector Copper or Aluminum30-30 2, 3 2.50 (64) — 240 1 #14 - #8 AWG (Cu Only)30-30 2, 3 5.00 (127) — 240 1 #14 - #4 AWG30-60 2, 3 5.00 (127) — 240 1 #14 - #4 AWG60-60 2, 3 5.00 (127) — 240 1 #14 - #4 AWG60-100 2, 3 7.50 (191) — 240 1 #10 - #1/0 AWG100-100 2, 3 7.50 (191) — 240 1 #10 - #1/0 AWG200-200 3 10.00 (254) — 240 1 #6 AWG - 350 kcmil200 2 — 7.50 (191) 240 1 #6 AWG - 350 kcmil200 3 — 10.00 (254) 240 2 #6 AWG - 350 kcmil30-30 2, 3 7.5 (191) — 600 1 #14 - #8 AWG30-60 2, 3 7.5 (191) — 600 1 #14 - #4 AWG60-60 2, 3 7.5 (191) — 600 1 #14 - #4 AWG60-100 2, 3 7.5 (191) — 600 1 #10-#1/0 AWG100-100 2, 3 7.5 (191) — 600 1 #10-#1/0 AWG200-200 3 10.00 (254) — 600 1 #6 AWG - 250 kcmil100 2, 3 — 7.50 (191) 600 1 #10-#1/0 AWG200 2, 3 — 10.00 (254) 600 1 #6 AWG - 250 kcmil10 PANELBOARDSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-45

PanelboardsType P4 PanelboardsBranch Breaker Side Gutter Inches (mm)DimensionsReferenceLetterPanel Width 32 in.Inches (mm)A 11.000 (279)B 7.000 (178)C 6.500 (146)D 5.250 (133)F 4.615 (177)G 8.769 (223)H 12.500 (265)I 8.250 (210)J 10.000 (254)K 7.000 (178)L 5.000 (127)M 7.500 (191)N 10.000 (254)O 10.500 (267)P 7.750 (197)ABCDFGHIJKLMNNOPBL, BLH, HBL, BQD, BLEBLEH, BLR, BLF, BLHFBAF, BAHF, BGLED4, ED6HED4, HHED6QJ2, QJH2QJ2H, HQJ2HFXD6, FD6HFD6CED6BL, BLH, HBL, BQD, BLEBLEH, BLR, BLF, BLHFBAF, BAHF, BGLED4, ED6HED4, HHED6QJ2, QJH2QJ2H, HQJ2HFXD6, FD6HFD6CED6CFD6JXD6, JD6, LXD6, LD6, SLD6SJD6, SHJD6, HLD6, SHLD6CJD6, SCJD6, CLD6, SCLD630–60A 5" switch30–60A 5" switch30–60A 7.5" switch30–60A 7.5" switch100–200A switch100–200A switch100–200A switchLMD6, LMXD6, HLMD6, HLMXD6NMG, HMG, LMGNGBNGBNEB, HEBNEB, HEBABCDFGHIJKLMNNOPPANELBOARDS1010-46Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

PanelboardsPower and DistributionType P4Shown with Standard Mains, Top Fedand Surface TrimCatalog number is for aluminum mainbus. For optional copper main buschange “A” in position 11 to “C”.Note: For 600V application, change “F” in position 3 to “G”.See alternate main breaker table on page 10-48 for600V rated mains. Change position 5 and 6 and addPanels are top feed, surface mounted.For bottom feed, change “T” in position12 to “B”. For flush mounting,change “S” in position 13 to “F”.price from table. Price only 600V rated branchbreakers.SelectionMain Lugs Only — shown with aluminum bus, top fed, and surface trims.Unit208Y/120V 240/120V 120/240V or 250 Vdc MaxMaximum Space 3-Phase, 4-Wire List 3-Phase, 4-Wire List 1-Phase, 3-Wire ListPanel Amps (inches) Catalog Number Price $ Catalog Number Price $ Catalog Number Price $30 P4C60ML400ATS 1220.00 P4B60ML400ATS 1220.00 P4A60ML400ATS 1220.00400 45 P4C75ML400ATS 1270.00 P4B75ML400ATS 1270.00 P4A75ML400ATS 1270.0060 P4C90ML400ATS 1360.00 P4B90ML400ATS 1360.00 P4A90ML400ATS 1360.0030 P4C60ML600ATS 1570.00 P4B60ML600ATS 1570.00 P4A60ML600ATS 1570.00600 45 P4C75ML600ATS 1660.00 P4B75ML600ATS 1660.00 P4A75ML600ATS 1660.0060 P4C90ML600ATS 1750.00 P4B90ML600ATS 1750.00 P4A90ML600ATS 1750.0030 P4C60ML800ATS 1910.00 P4B60ML800ATS 1910.00 P4A60ML800ATS 1910.00800 45 P4C75ML800ATS 2020.00 P4B75ML800ATS 2020.00 P4A75ML800ATS 2020.0060 P4C90ML800ATS 2120.00 P4B90ML800ATS 2120.00 P4A90ML800ATS 2120.0030 P4C60ML101ATS 2230.00 P4B60ML101ATS 2230.00 P4A60ML101ATS 2230.001000 45 P4C75ML101ATS 2350.00 P4B75ML101ATS 2350.00 P4A75ML101ATS 2350.0060 P4C90ML101ATS 2460.00 P4B90ML101ATS 2460.00 P4A90ML101ATS 2460.0030 P4C60ML120ATS 2510.00 P4B60ML120ATS 2510.00 P4A60ML120ATS 2510.001200 45 P4C75ML120ATS 2650.00 P4B75ML120ATS 2650.00 P4A75ML120ATS 2650.0060 P4C90ML120ATS 2800.00 P4B90ML120ATS 2800.00 P4A90ML120ATS 2800.00Unit240V 480Y/277V 480V Maximum Space 3-Phase, 3-Wire List 3-Phase, 4-Wire List 3-Phase, 3-Wire ListPanel Amps (inches) Catalog Number Price $ Catalog Number Price $ Catalog Number Price $30 P4D60ML400ATS 1010.00 P4E60ML400ATS 1200.00 P4F60ML400ATS 1010.00400 45 P4D75ML400ATS 1060.00 P4E75ML400ATS 1270.00 P4F75ML400ATS 1060.0060 P4D90ML400ATS 1110.00 P4E90ML400ATS 1360.00 P4F90ML400ATS 1110.0030 P4D60ML600ATS 1270.00 P4E60ML600ATS 1570.00 P4F60ML600ATS 1270.00600 45 P4D75ML600ATS 1360.00 P4E75ML600ATS 1660.00 P4F75ML600ATS 1360.0060 P4D90ML600ATS 1410.00 P4E90ML600ATS 1750.00 P4F90ML600ATS 1410.0030 P4D60ML800ATS 1510.00 P4E60ML800ATS 1910.00 P4F60ML800ATS 1510.00800 45 P4D75ML800ATS 1590.00 P4E75ML800ATS 2020.00 P4F75ML800ATS 1590.0060 P4D90ML800ATS 1690.00 P4E90ML800ATS 2120.00 P4F90ML800ATS 1690.0030 P4D60ML101ATS 1760.00 P4E60ML101ATS 2230.00 P4F60ML101ATS 1760.001000 45 P4D75ML101ATS 1870.00 P4E75ML101ATS 2350.00 P4F75ML101ATS 1870.0060 P4D90ML101ATS 1960.00 P4E90ML101ATS 2460.00 P4F90ML101ATS 1960.0030 P4D60ML120ATS 2020.00 P4E60ML120ATS 2510.00 P4F60ML120ATS 2020.001200 45 P4D75ML120ATS 2130.00 P4E75ML120ATS 2650.00 P4F75ML120ATS 2130.0060 P4D90ML120ATS 2260.00 P4E90ML120ATS 2800.00 P4F90ML120ATS 2260.00Main Circuit Breaker — shown with standard mains, aluminum bus, top fed, and surface trims.Replace fifth and sixth positionin panelboard catalog number,with alternate main breaker code.Use price adders from main breakersection table. Horizontally mounted.Unit208Y/120V 240/120V 120/240V or 250 Vdc MaxMaximum Space 3-Phase, 4-Wire List 3-Phase, 4-Wire List 1-Phase, 3-Wire ListPanel Amps (inches) Catalog Number Price $ Catalog Number Price $ Catalog Number Price $21.25 P4C60JX400ATS 4000.00 P4B60JX400ATS 4000.00 P4A60JX400ATS 3450.00400 36.25 P4C75JX400ATS 4210.00 P4B75JX400ATS 4210.00 P4A75JX400ATS 3630.0051.25 P4C90JX400ATS 4420.00 P4B90JX400ATS 4420.00 P4A90JX400ATS 3820.0021.25 P4C60LX600ATS 6250.00 P4B60LX600ATS 6250.00 P4A60LX600ATS 5250.00600 36.25 P4C75LX600ATS 6600.00 P4B75LX600ATS 6600.00 P4A75LX600ATS 5550.0051.25 P4C90LX600ATS 6950.00 P4B90LX600ATS 6950.00 P4A90LX600ATS 5840.0021.25 P4C60M1800ATS 8020.00 P4B60M1800ATS 8020.00 P4A60M1800ATS 6710.00800 36.25 P4C75M1800ATS 8480.00 P4B75M1800ATS 8480.00 P4A75M1800ATS 7160.0051.25 P4C90M1800ATS 8930.00 P4B90M1800ATS 8930.00 P4A90M1800ATS 7610.00Unit240V 480Y/277V 480V Maximum Space 3-Phase, 3-Wire List 3-Phase, 4-Wire List 3-Phase, 3-Wire ListPanel Amps (inches) Catalog Number Price $ Catalog Number Price $ Catalog Number Price $21.25 P4D60JX400ATS 3820.00 P4E60JX400ATS 4120.00 P4F60JX400ATS 3940.00400 36.25 P4D75JX400ATS 4010.00 P4E75JX400ATS 4340.00 P4F75JX400ATS 4140.0051.25 P4D90JX400ATS 4220.00 P4E90JX400ATS 4560.00 P4F90JX400ATS 4350.0021.25 P4D60LX600ATS 6000.00 P4E60LX600ATS 6250.00 P4F60LX600ATS 6000.00600 36.25 P4D75LX600ATS 6310.00 P4E75LX600ATS 6600.00 P4F75LX600ATS 6310.0051.25 P4D90LX600ATS 6650.00 P4E90LX600ATS 6950.00 P4F90LX600ATS 6650.0021.25 P4D60M1800ATS 8020.00 P4E60M1800ATS 8020.00 P4F60M1800ATS 8020.00800 36.25 P4D75M1800ATS 8480.00 P4E75M1800ATS 8480.00 P4F75M1800ATS 8480.0051.25 P4D90M1800ATS 8930.00 P4E90M1800ATS 8930.00 P4F90M1800ATS 8930.0010 PANELBOARDSDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-47

PanelboardsPower and DistributionMain Fusible Switch (fuses not included)SelectionMaximumUnit208Y/120V 240/120V 120/240VPanel Space 3-Phase, 4-Wire List 3-Phase, 4-Wire List 1-Phase, 3-Wire ListAmpere Rating (inches) Catalog Number Price $ Catalog Number Price $ Catalog Number Price $20 P4C60MS100ATS 1670.00 P4B60MS100ATS 1670.00 P4A60MS100ATS 1400.002003520P4C75MS100ATSP4C60MS200ATS1770.001740.00P4B75MS100ATSP4B60MS200ATS1770.001740.00P4A75MS100ATSP4A60MS200ATS1480.001440.0035 P4C75MS200ATS 1840.00 P4B75MS200ATS 1840.00 P4A75MS200ATS 1530.00MaximumUnit240V 480Y/277V 480V Panel Space 3-Phase, 3-Wire List 3-Phase, 4-Wire List 3-Phase, 3-Wire ListAmpere Rating (inches) Catalog Number Price $ Catalog Number Price $ Catalog Number Price $20 P4D60MS100ATS 1590.00 P4E60MS100ATS 1930.00 P4F60MS100ATS 1790.002003520P4D75MS100ATSP4D60MS200ATS1610.001590.00P4E75MS100ATSP4E60MS200ATS2050.002000.00P4F75MS100ATSP4F60MS200ATS1890.001860.0035 P4D75MS200ATS 1690.00 P4E75MS200ATS 2110.00 P4F75MS200ATS 1950.00Type P4Alternate Main Breaker SelectionMaximum InterruptingAmpere Breaker CatalogRating (KA)ListRating Type Number 240V 480V 600V Price $ Available Trip ValuesJXD6 JX 65 35 25 STD 200, 225, 250, 300, 350, 400JD6 J6 65 35 25 510. 200, 225, 250, 300, 350, 400HJD6 HJ 100 65 35 1630. 200, 225, 250, 300, 350, 400400 CJD6 CJ 200 150 150 2260. 200, 225, 250, 300, 350, 400SJD6 SJ 65 35 25 1130. 200, 300, 400SHJD6 SH 100 65 35 2370. 200, 300, 400SHJD6H SC 200 150 100 3020. 200, 300, 400LXD6 LX 65 35 25 STD 450, 500, 600LD6 L6 65 35 25 120. 250, 300, 350, 400, 450, 500, 600HLD6 HL 100 65 35 880. 250, 300, 350, 400, 450, 500, 600600 CLD6 CL 200 150 100 3390. 450, 500, 600SLD6 SL 65 35 25 730. 300, 400, 500, 600SHLD6 S6 100 65 35 2430. 300, 400, 500, 600SCLD6 C6 200 150 100 4640. 300, 400, 500, 600NMX M1 65 35 25 STD 600, 700, 800800 HMX M2 100 65 50 1130. 600, 700, 800LMX M3 200 100 65 3260. 600, 700, 800LMXD6 LM 65 50 25 590. 500, 600, 700, 800800LMD6HLMXD6L1HK6510050652550590.1870.500, 600, 700, 800500, 600, 700, 800HLMD6 HJ 100 65 50 1870. 500, 600, 700, 800PANELBOARDS10For inches / millimeters conversion, see Application Datasection. For 600V applications, change “F” in position 3 to “G”.Price only 600V branch device. Space price covers cost of housing frame plate withblank cover plate. Provision price includes all necessarymounting hardware, less circuit breaker, and includeshousing frame cover plate with breaker handle opening.10-48Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

PanelboardsPower and Distribution Space price covers cost of housing frame plate withblank cover plate. Provision price includes all necessarymounting hardware, less circuit breaker, and includeshousing frame cover plate with breaker handleopening. 1 to 6 poles may be mounted in 3.75" of unit space. Accessories such as shunt trips on three pole breakersrequire 6.25" of unit space. HED4 1-pole 15–30A = 65,000 IR35–100A = 25,000 IR For 600V applications, ED6 available at same list price. Ground fault not available on branch Sensitripbreakers.SelectionBranch Breaker SelectionAvailableProvisionsMounting Height Maximum Interrupting RatingBreaker Trip ValueList Price Installed $Space for(inches)(KA)Type Ampere Ratings 1-Pole 2-Pole 3-Pole $ Future $ Twin Single 120V 120/240V 240V 277V 480Y/277 480V 600V 250V DC15–60 100. 170. 250. 35. 55. — 10 — — — — — —BL 70 160. 190. 290. 35. 55. — 10 — — — — — —80, 90, 100 — 230. 330. 35. 55. — 10 — — — — — —BL (HID) 15, 20, 30 110. 190. — 35. 55. — 10 — — — — — —BAF 15, 20 220. 380. — 35. 55. 10 10 — — — — — —BAFH 15, 20 280. 450. — 35. 55. 22 22 — — — — — —BLF (GFCI)15, 20, 3040, 50, 60220.—250.290.——35.35.55.55. ——1010————————————BLE (EQ GFI) 15, 20, 30 200. 250.— — 35. 55. — 10 — — — — — —BLEH15, 20, 30, 420. — — 35. 55. 40, 50, 60 — 530.— — 35. 55. ——1010————————————BGL (SWN) 15, 20, 30 — 180. 230. 35. 55. — 10 — — — — — —BL (240V)R15, 20, 30, 40, 50, 6070, 80, 90, 100——210.310.——35.35.55.55. ————1010——————————BLH (120V)15, 20, 30, 40, 50, 60, 7080, 90, 100130.—250.280.340.480.35.35.55.55. ——2222————————————HBL15, 20, 30, 40, 50, 6070, 80, 90, 100130.—320.320.400.540.35.35.55.55. ——65656565——————————BLHF (GFCI) 15, 20, 30, 250. 340. — 35. 55. — 22 — — — — — —BQD15, 20, 30, 40, 50, 6070, 80, 90, 100130.200.320.420.400.540.35.35.55.55. ————6565——1414————141415—60 140. 460. 510. 35. 55. 100 100 100 25 25 25 — 14NGB 70—100 210. 500. 660. 35. 55. 3.75 — 100 100 100 25 25 25 — 14110—125 =— 820. 1190. 35. 55. 100 100 100 25 25 25 — 1415—60 270. 450. 590. 75. 110. 85 85 85 35 35 35 — 35NEB 70—100 300. 510. 670. 75. 110. 3.75 — 85 85 85 35 35 35 — 35110—125 730. 1290. 1440. 75. 110. 85 85 85 35 35 35 — 3515—60 390. 690. 910. 75. 110. 100 100 100 65 65 65 — 42HEB 70—100 430. 760. 990. 75. 110. 3.75 — 100 100 100 65 65 65 — 42110—125 1220. 2150. 2280. 75. 110. 100 100 100 65 65 65 — 4215, 20, 30, 40, 50, 60 175. 570. 630. 75. 110. — — 65 — 18 18 — 30ED4 70, 80, 90, 100 260. 620. 820. 75. 110. 3.75 3.75 — — 65 — 18 18 — 30110, 125 — 1010. 1470. 75. 110. — — 65 — 18 18 — 3015, 20, 30, 40, 50, 60 490. 850. 1120. 75. 110. — — 100 25 25 — 30HED4 70, 80, 90, 100 490. 950. 1220. 75. 110. 3.75 3.75 — — 100 — 25 42 — 30110, 125 — 2660. 2830. 75. 110. — — 100 — 42 42 — 3015, 20, 30, 40, 50, 60 — 940. 1250. 75. 110. — — 100 — — 65 25 —HHED6 70, 80, 90, 100 — 1060. 1360. 75. 110. 3.75 3.75 — — 100 — — 65 25 —110, 125 — 2970. 3130. 75. 110. — — 100 — — 65 25 —CED615, 20, 30, 40, 50, 60, 70, 80, 90, 100110, 125——1970.3160.2410.3980.75.75.110.110. 3.75 —————200200————200200——3030QJ2 60, 70, 80, 90, 100, 125, 150, 175, 200, 225 — 720. 940. 75. 150. 5 5 — — 10 — — — — —QJH2 60, 70, 80, 90, 100, 125, 150, 175, 200, 225 — 740. 1250. 75. 150. 5 5 — — 42 — — — — —FXD6 70, 80, 90, 100, 125, 150, 175, 200, 225 — 1250. 1590. 75. 320. 5 5 — — 65 — — 35 — 30HFD6 70, 80, 90, 100, 125, 150, 175, 200, 225 — 2750. 3350. 75. 320. 5 5 — — 100 — — 65 — 30CFD6 70, 80, 90, 100, 125, 150, 175, 200, 225 — 3500. 4470. 75. 320. — 5 — — 200 — — 200 — 30FXD6 250 — 2190. 2700. 75. 320. 5 5 — — 65 — — 35 — 30HFD6 250 — 3940. 4240. 75. 320. 5 5 — — 100 — — 65 — 30CFD6 250 — 4590. 5580. 75. 320. — 5 — — 200 — — 200 — 30JXD2 200, 225, 250, 300, 350, 400 — 2150. 2350. 130. 350. — 8.75 — — 65 — — — — 30JXD6 200, 225, 250, 300, 350, 400 — 2230. 2750. 130. 350. — 8.75 — — — — — 35 25 30HJD6 200, 225, 250, 300, 350, 400 — 4380. 4610. 130. 350. — 8.75 — — 100 — — 65 35 30CJD6 200, 225, 250, 300, 350, 400 — 4910. 6310. 130. 350. — 8.75 — — 200 — — 150 100 30SJD6 200, 225, 250, 300, 350, 400 — — 5960. 130. 350. — 8.75 — — 65 — — 35 25 —SHJD6 200, 300, 400 — — 6610. 130. 350. — 8.75 — — 100 — — 65 35 —LXD6 450, 500, 600 — 3540. 4580. 140. 640. — 8.75 — — 65 — — 35 25 30HLD6 250, 300, 350, 400, 450, 500, 600 — 4280. 5360. 140. 640. — 8.75 — — 100 — — 65 35 30CLD6 450, 500, 600 — 7950. 9720. 140. 640. — 8.75 — — 200 — — 150 100 30SLD6 300, 400, 500, 600 — — 6600. 140. 640. — 8.75 — — 65 — — 35 25 —SHLD6 300, 400, 500, 600 — — 6680. 140. 640. — 8.75 — — 100 — — 65 35 —LMD6,LMXD6500, 600, 700, 800 — 5060. 6520.— 210. 1360. — 8.75 — — 65 — — 50 25 30HLMD6,HLMXD6500, 600, 700, 800 — 6510. 8060.— 210. 1360. — 8.75 — — 100 — — 65 50 30NMX 600, 700, 800 — 4590. 5930. 210. 1720. — 8.75 — — 65 — — 35 25 30HMX 600, 700, 800 — 5910. 7320. 210. 1720. — 8.75 — — 100 — — 65 50 30LMX 600, 700, 800 — 15430. 17690. 210. 1720. — 8.75 — — 200 — — 100 65 30 Integral ground fault not available for 3-phase,4-wire systems. Only 3-phase, 3-wire from 3-phase,4-wire systems. HED 4 3-Pole=42,000 IR10 PANELBOARDSDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-49

PanelboardsPower and DistributionBranch Switch SelectionAmpere List Price $ Space Provisions for MountingRating 3-Pole 2-Pole Only $ Future $ Hgt (inches)240V — Twin MountedNEC Fuse Clips 30-30 965. 815. 105. 140. 2 1 ⁄2 30-30 1020. 870. 170. 225. 530-60 1020. 900. 170. 225. 560-60 1020. 900. 170. 225. 560-100 1315. 1050. 225. 255. 7 1 ⁄2100-100 1410. 1050. 225. 255. 7 1 ⁄2200-200 2510. — 275. 435. 10Type S4/P4/SPP (10" deep) and F1/P4/FPP(10" deep)Connecting Strap Kits — w/o Circuit BreakerFor use with Sentron SPP Shallow Depth or Type S4 power panelsUnitBreaker Mounting Height Catalog ListType Type (inches) Number Price $BL/BQD Twin 3.75 SBL 902.00NGB Twin 3.75 SNB 902.00NEB, HEB Twin 3.75 SEB 902.00ED Twin 3.75 SE6 902.00CED6 Single 3.75 SCE 902.00QJ Twin 5 SQJ 1622.00FD6 Twin 5 SF6 1622.00CFD6 Single 5 SCF 1622.00JXD2,6 Single 8.75 SJ1 2254.00SJD6 Single 8.75 SSJ1 2254.00CJD6 Single 8.75 SCJ 2254.00SCJD6 Single 8.75 SSCJ 2254.00LD6 Single 8.75 SL6 2668.00SLD6 Single 8.75 SSL6 2668.00CLD6 Single 8.75 SCL 2668.00SCLD6 Single 8.75 SSCL 2668.00NM, HM, LM,SNM, SHMSingle 8.75 MG1 3317.00Blank Plates — CircuitBreaker and Vacu-BreakFiller PlatesSelectionAmpere List Price $ Space Provisions for MountingRating 3-Pole 2-Pole Only $ Future $ Hgt (inches)600V — Twin MountedNEC Fuse Clips 240V — Single Mounted NEC Fuse Clips 30-30 1400. — 225. 295. 7 1 ⁄230-60 1400. — 225. 295. 7 1 ⁄260-60 1400. — 225. 295. 7 1 ⁄260-100 1525. — 225. 295. 7 1 ⁄2100-100 1610. — 225. 295. 7 1 ⁄2200-200 2895. — 275. 435. 10600V — Single MountedNEC Fuse Clips 100 1070. — 225. 295. 7 1 ⁄2200 1465. — 275. 445. 1030 830. — 260. 280. 7 1 ⁄260 830. — 260. 280. 7 1 ⁄2100 1080. — 225. 295. 7 1 ⁄2200 1355. — 225. 295. 10200 — 1335. 275. 435. 7 1 ⁄2For use with Sentron SPP and Type S4 power panelsHeight Catalog List(inches) Number Price $1.25 6FPB01 196.002.5 6FPB02 224.003.75 6FPB03 224.005.0 6FPB05 224.0010.0 6FPB10 302.00For use with Sentron SPP and S4 power panelsFillerPlateBreaker Catalog ListType Number Price $BL, BLH, HBLED2, ED4, ED6 QF3 2.80 per poleHED4, HHED6Note: When a front filler plate is not completely filled with breakers, the openings in the unusedspace must be closed with filler plates selected from this table.10PANELBOARDSConnecting Strap Kits FusibleFor use with Sentron Shallow Depth or TypeSPP/FPP/F1/P4 power panelsUnit10" Deep BoxAmpere Height Catalog ListRating (inches) Number Price $30–30 2.5 F602 46.0030–60 5, 7.5 F657 46.0030–60 5, 7.5 F657 46.0060–60 5, 7.5 F657 46.0060–100 5, 7.5 F657 46.00100–100 5, 7.5 F657 46.00100 7.5 F657 46.00200 7.5 F657 46.00200 10 F671 70.00200–200 10 F672 430.00For inches / millimeters conversion, see Application Data section. Space price covers cost of housing frame plate withoutbreaker handle opening. Provisions include allnecessary mounting hardware less breakers. For Class J, R or T fuse clip prices, refer to page 10-51.For Class J fuse clips price 600V, 7 1 ⁄2" high units. NEC fuse clips only. Normal stock item.10-50Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

Sentron ® PanelboardsModifications and AdditionsType P4When required, special constructions oradditions to standard panelboards may bespecified for all factory-assembled Powerand Distribution Panelboards. Belowand on the next page are listed many ofthose available for Type S4/F1/P4panelboards. In no case do these applyto Narrow (Column) Width LightingPanelboards or UnassembledPanelboards.1. Type 3R/12ListPrice $Description 32"Panelboard Construction: Single Door(Complete enclosure does notrequire a trim) 1175.ListPrice $AllDescriptionPanels2. Painted Finish See page 10–713. Miscellaneous AccessoriesNameplate — laminated, engraved 50.Tamper-Resistant Screws — per panel 70.4. Devices Mounted on Gutter Cover —Includes Device, Mounting —Wired or Unwired See page 10–715. Increased Capacity NeutralAmpere RatingListPhase Neutral Price $400 600 540.400 800 560.600 1200 795.800 1200 850.For inches / millimeters conversion, see Application Data section. At 250 Volts — available on 5" unit only. Class “J” clips not required on 600V twin 200A switch.Class “R” and “T” clips not available on this switch.6. Subfeed or Feed-Thru Lugs(One Set Per Panel)Subfeed Double Lugs(Main Lug Panels)Unit SpaceAmpereList Price $ (Additional Inches)Rating 3-Phase 1-Phase MLO400 245. 245. —600 455. 455. —800 NA NA NA1200 NA NA NAFeed-Thru Lugs400 245. 245. 10600 455. 455. 10800 615. 615. 17.51200 765. 765. 17.57. Split Bus (Unit Space +1.25")List Price $Phases 400A 600A 800A 1200A1 350. 415. 570. 700.3 415. 455. 655. 740.8. MLO Compression Lugs —Aluminum Lugs for Use WithCopper or Aluminum Cable seepage 10-52.9. Compression Lugs ForCircuit Breakers see page Section 6.10. Circuit Breaker Main — WithVacu-Break Branch PanelboardsPrice appropriate main breaker panel,then add list prices of desired vacu-breakbranches and accessories.11. Vacu-Break Main — With CircuitBreaker Branch PanelboardsPrice appropriate main switch panel, thenadd list price of desired circuit breakerbranches and accessories.12. Grounding of Panelboards(No Brazed Ground Bus Offered)Ground Bus ships with the interior asstandard — $115. list added for factorymounted.Non-Insulated Equipment Ground BarIncluding Ground Lug . . . . . . StandardInsulated Equipment Ground BarIncluding Ground Lug . . $395. per panel Integral ground fault not available on 600 amp 3-phase,4-wire systems. Only 3-phase, 4-wire systems. Only 3-phase wire from 3-phase, 4-wire systems. Available in 90" high enclosure only. Unit space is42 1 /2" with Test and Monitor Panel; 45" without Test andMonitor Panel.15. Remote Control SwitchesSelection13. Fuse Clip Provisions(Add to 250 Volts or 600 Volts UnitPrices Per Switch)Ampere List Price $ List Price $ List Price $Rating Class J Class R Class T30 55. 55. N/A60 55. 55. N/A100 85. 85. 180.200 85. 85. 285.14. Spanner Wrenches(for Vacu-Break Switches)Ampere Rating List Price $30-250 460.Switch Type Modification920 TAKES 20.0 unit space911≤ 800A 25" to unit space≥ 800A 30" unit spaceLEN≤ 60 AMPS 10" unit space> 60 AMPS 15" unit space16. Ground Fault on Main BreakerAmpere ListDescription Rating Price $Conventional Ground Fault includes:Ground Fault Relay, GroundSensor, CPT and Shunt Trip 400-600 6300.Test and Monitor Panel 1070.Ground Fault add toSensitrip III breaker price 400-600 2500.17. Time Clocks Sangamo, Tork or Paragon time clockcan be supplied, mounted in panelboardcabinet. For required increase inenclosure dimensions, consult localsales office. Price appropriatepanelboard, then add list price below.ListDescription Price $Time Clock (one or two pole, single ordouble throw contacts; three pole, .single throw) 277V maximum withplain dial . . . . . . . . . . . . . . . . . . . . . . 1070.Add for —Astronomical dial . . . . . . . . . . . . . 210.An omitting device . . . . . . . . . . . . 75.Reserve power or carryover . . . . . 2450.Space and mounting provisions only 540. Not available on Sensitrip III. For required unit space — consult local sales office.Price includes increased enclosure height if required. No charge at time of order.10 PANELBOARDSDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-51

Sentron ® PanelboardsModifications and AdditionsType S4/F1/P418. Circuit Breaker AccessoriesBreakerListType Price $Handle Blocking DeviceBlocks handle in either the “ON” or“OFF” position See Page 10-73Padlocking Device — Padlocks in“OFF” position See Page 10-7319. Ground Fault Sensing Relay KitEquipment Protection ED Frames(30 ma) See Section 620. Main BusStandard main bus and ground bus is tinplated aluminum. For copper main bus,neutral bus and ground bus add from thetable for each panel. Copper Neutral Bar$115. List Price.CatalogList Price $Main Bus Number 400A 600-1200ASilver Plated Cu E 475. 1220.1000A per sq. in Cu D 540. 1230.750A per sq. in Al B 340. 645.21. Copper Lugs —For Main Lug Only PanelsStandard main lugs and neutral lugs aretin plated aluminum, UL listed for usewith aluminum/copper cables. Pricebelow is for one panel and includescopper lugs for main lugs and neutral lugs,and must be used with copper cables.Main BusListAmpere Rating Price $400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150.600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190.800-1200 . . . . . . . . . . . . . . . . . . . . . . . . 260.22. Shunt Trip on Main and Branches See Breaker Section for list prices on thisoption.23. Alternate Lugs Main Lug Only24. Compression LugsSelectionAmperage Box Height PriceStyle Rating Alternate Connectors Addition Addition $Deduct 2.5"400 N/A(1)#3/0 AWG - 750 kcmil or (2)#3/0 AWG - 250 kcmil Unit SpaceCu or Al unit spacefrom available125.unit space600 N/A (2)#3/0 AWG - 750 kcmil or (4)#3/0 - 350 kcmil 0 255.Deduct 5.0"MLO 800 (3)#3/0 AWG - 750 kcmil Cu or AlUnit Spacefrom available390.unit spaceDeduct 7.5"1000 N/A (4)#3/0 AWG - 750 kcmil Cu or AlUnit Spacefrom available510.unit spaceAmp Breaker Compression Box HeightStyle Rating Type Connectors Addition Price Addition $3-Phase 4-Wire = $150400 N/A2-Wire = $1153-Phase 4-Wire = $200(1)250-500 kcmil or Deduct 5.0" Unit Space 3-Phase 3-Wire = $115(2)#2/0 AWG - 250 kcmil Cu or Al from available unit space 1-Phase 3-Wire = $115600 N/A (2)#3/0 AWG - 500 kcmil2-Wire = $1503-Phase 4-Wire = $255Deduct 5.0" Unit Space 3-Phase 3-Wire = $150from available unit space 1-Phase 3-Wire = $150MLO 800 N/A (3)#3/0 AWG - 500 kcmil Cu or Al2-Wire = $1903-Phase 4-Wire = $350Deduct 5.0" Unit Space 3-Phase 3-Wire = $190from available unit space 1-Phase 3-Wire = $1901000 N/A (4)#3/0 AWG - 500 kcmil Cu or Al2-Wire = $2553-Phase 4-Wire = $350Deduct 5.0" Unit Space 3-Phase 3-Wire = $255from available unit space 1-Phase 3-Wire = $2551200 N/A (4)#3/0 AWG - 500 kcmil Cu or Al2-Wire = $255Deduct 5.0" Unit Space 3-Phase 3-Wire = $255from available unit space 1-Phase 3-Wire = $255JD6, JXD6, 3-Phase 4-Wire = $350MainHJD6, CJD6,3-Phase 3-Wire = $255400(2)#2/0 AWG - 500 kcmil Cu or Al 0Breaker SJD6, SHJD6, 1-Phase 3-Wire = $255SCJD6 2-Wire = $255PANELBOARDS10For inches / millimeters conversion, see Application Datasection. Replace ”A” in position 11 of catalog number. Shunt Trip on 100A frame breakers increases mountingheight to 6.25" for twin mounting. Must price “D” for “B” main bus from item #20 above. See section (6) circuit breakers for 100% rated circuitbreaker requirements.10-52Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

Sentron ®PanelboardsType 1 Enclosure Modifications and AdditionsSelectionCatalog Panel After MarketNumber Description Adder $ Price $BoxesPB60 P4 box 32 W X 10 Dp X 60 Ht. Standard 595.PB75 P4 box 32 W X 10 Dp X 75 Ht. Standard 595.PB90 P4 box 32 W X 10 Dp X 90 Ht. Standard 595.WP260 P4 Nema 3R/12 32W X 10 Dp X 60 Ht. 1175. 2255.WP275 P4 Nema 3R/12 32W X 10 Dp X 75 Ht. 1175. 2255.WP290 P4 Nema 3R/12 32W X 10 Dp X 90 Ht. 1175. 2255.TrimsP460V P4 Std (4 piece trim) vented 60" Standard 615.P475V P4 Std (4 piece trim) vented 75" Standard 645.P490V P4 Std (4 piece trim) vented 90" Standard 670.P460NV P4 Std (4 piece trim) unvented 60" 615.P475NV P4 Std (4 piece trim) unvented 75" 645.P490NV P4 Std (4 piece trim) unvented 90" 670.P460VHG P4 Std (4 piece trim) vented 60" w/Hinged gutter covers 290. 910.P475VHG P4 Std (4 piece trim) vented 75" w/Hinged gutter covers 290. 935.P490VHG P4 Std (4 piece trim) vented 90" w/Hinged gutter covers 290. 965.P460NVHG P4 Std (4 piece trim) unvented 60" w/Hinged gutter covers 290. 910.P475NVHG P4 Std (4 piece trim) unvented 75" w/Hinged gutter covers 290. 935.P490NVHG P4 Std (4 piece trim) unvented 90" w/Hinged gutter covers 290. 965.P460VD P4 Std (1 PC. Door) vented 60" 730.P475VD P4 Std (1 PC. Door) vented 75" 755.P490VD P4 Std (1 PC. Door) vented 90" 785.P460NVD P4 Std (1 PC. Door) unvented 60" 730.P475NVD P4 Std (1 PC. Door) unvented 75" 755.P490NVD P4 Std (1 PC. Door) unvented 90" 785.P460VDD P4 Std (1 PC. Door in door) vented 60" 360. 1090.P475VDD P4 Std (1 PC. Door in door) vented 75" 360. 1115.P490VDD P4 Std (1 PC. Door in door) vented 90" 360. 1140.P460NVDD P4 Std (1 PC. Door in door) unvented 60" 360. 1090.P475NVDD P4 Std (1 PC. Door in door) unvented 75" 360. 1115.P490NVDD P4 Std (1 PC. Door in door) unvented 90" 360. 1140.Flush Mounting KitsF60 Flush kit for P4 60" Ht. 145.F75 Flush kit for P4 75" Ht. 145.F90 Flush kit for P4 90" Ht. 145.Type 3R/12 EnclosuresWP260 P4 3R/12 Enclosures 60" 1175. 2255.WP275 P4 3R/12 Enclosures 75" 1175. 2255.WP290 P4 3R/12 Enclosures 90" 1175. 2255.For inches / millimeters conversion, see Application Datasection.No price adder. Note as Mod. Note as Mod. No charge if noted at time of order.10 PANELBOARDSDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-53

PanelboardsType P4 PanelboardsType 1 BoxBox is symmetricalBox To WallMounting Holes4.375 in.[ 111 ]DimensionsRecommended Conduit Area6.635 in.[169 ]8.0 in.[ 203 ]30.0 in.[ 254 ]Interior To BoxMountingStubs60 in.,[ 1524 ]75 in.,[ 1905 ]90 in.[ 2286 ]6.635 in.[ 169 ]14 in.[356]24 in.[ 610 ]32 in.[ 813 ]4.375 in.[ 111 ]10.0 in.[ 254 ]Type 3R and 3R/12 Box12 in.[ 305 ].375 in.[ 10 ]15.81 in.[ 402 ]MountingBracket60 in.,[ 1524 ]75 in.,[ 1905 ]90 in.[ 2286 ].375 in.[ 10 ]15.81 in.[ 402 ]10PANELBOARDS32 in.[813 ]34 in.[ 864 ]36 in.[ 914 ].87 in.[ 22 ]10.0 in.[ 254 ] Dimensions are interior of the box. Add 5/8" to width for absolutedimension. Add 1/8" to height for absolute dimension.Dimensions shown in inches and millimeters [ ].10-54Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

PanelboardsType P5 PanelboardsFeaturesThe P5 panel is the largest footprintdistribution panel in the Siemens panelfamily. Even though it is our largestpanel type, the P5 panel is still a spacesaver with it’s 38" width and 12.75"depth. With even higher main ratingsto fit the application that require more orlarger branch devices. This panel offers awide array of factory assembled optionsand has the ability to mix breaker framesin unit space up to 1200 amps andfusible switches up to 1200 amps.Bussing options for the P5 vary from thestandard temperature rated aluminum totemperature rated copper and 750 A/SIaluminum and 1000A/Si copper designs.All aluminum bussing in the P5 panel istin-plated as a standard. Silver-plated isoffered as the default for copper bus andtin as an option. Integrated time clocks,bus mounted contactors as mains orsubmains, split bus and subfeed lugs(up to 600 amps) are just a few of theoptions of this flexible panel.The P5 panel configurations defined bythe unit space allowed for a givenamperage, main device and box height.The P5 panel starts with a 60" high box.All of the branch devices are unit spacemounted. Breakers and switches can bemixed and matched to meet customerrequirements.Main Lug / Main Breaker / MainSwitchEnclosure – Standard Type 1 enclosureis 38" wide x 12.75" deep. X Box Heightis determined by main device and unitspace. See charts for box height.Voltage – 600V AC max.250V DC max.Amperage – 800-1200 amp Mainbreaker, 800-1200 amp MLO (checkavailability of 1600 amp with factory),400-1200 amp Main switch.Short Circuit Rating – 200 Kaic max.symmetrical or equal to the lowest rateddevice installed unless a series rating isindicated. Panels with subfeed orfeed-thru lugs without a main device,circuit breaker or fusible unit, are limitedto a three-cycle rating. The three-cyclerating for the P5 panel is limited to 42Kaic. Note that the main device may bemounted remote from the panel.Bussing – The P5 panel has moreoptions to meet market requirements.The standard bussing is temperaturerated aluminum. The rating is per therequirements of UL 67 – the standard forpanelboards. All aluminum bussing istin-plated. Optional bussing for the P5panel is: 750 A/si aluminum, temperaturerated copper, and 1000 A/si copper.The copper bus option for this panel istin-plated.Weight – ApproximateTotal panelboard weight when filledwith a normal quantity of breakers andaccessories is about 10 lbs. (1 kg) perinch (54g per mm) of box height.Main Lugs AmpereConnectors Suitable forRatingCopper or Aluminum800 (3) - #3/0 AWG-500 Kcmil1000 (4) - #3/0 AWG-500 Kcmil1200 (4) - #3/0 AWB-500 Kcmil Alternate lugs for 750 kcmil cable are available, butresult in significant loss of branch unit mounting space.Consult Siemens.Gauge Steel of Boxes Fronts, Surfaceand FlushDimensions ininches (mm) Gauge SteelWidth Height Box Fronts38" 60 - 75 - 90 #16 #14 (1 piece trim)(965) (1524, 1905, #14 Ga. (4 piece2286) trim) 16 gauge side panels, 12 gauge back support.General10 PANELBOARDSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-55

PanelboardsPower and DistributionEnclosure Selection Selection/DimensionsEnclosure Dimension in Inches (mm)Available Unit Space in Inches (mm)H W D Main Lug Main Breaker Main SwitchType 1, 3R/12 Type 1, 3R/12 Type 1 Type 3R/12 800 / 1200A 800 / 1200A 800 / 1200A60 (1524) 38 (965) 12.75 (324) 14.25 (362) 30 (762) 20 (508) —75 (1905) 38 (965) 12.75 (324) 14.25 (362) 45 (1143) 35 (889) 35 (889)90 (2286) 38 (965) 12.75 (324) 14.25 (362) 60 (1524) 50 (1270) 50 (1270)Main Breaker Unit Space DimensionsDimensions in Inches (mm)AmpereNeutralRating Breaker Type A BLXD6, LMXD6, LMD6, MXD6, MD6, HMD6 13.00 (330)800CMD6, SCMD6, SHMD6, SMD6 10.42 (265) 13.125 (333)1200 NXD6, ND6, HND6, CND6, SND6, SHND6 13.00 (330)Main SwitchMaximumAmpere Rating A B400A/600A VB 9.3 13.125800A/1200A HCP 10.3 13.125Main Switch ConnectorsAmpere Connectors suitable forRating Copper or Aluminum400(1) #3/0 AWG-500 kcmil(2) #3/0 AWG-250 kcmil600 (2) #3/0 AWG-500 kcmil800 (3) #3/0 AWG-500 kcmil1200 (4) #3/0 AWG-500 kcmilMain Lugs Only Wire Bending SpaceDimensions in inches (mm)Main LugNeutral800A 1000A 1200A 800ALugs C D E GMain Breaker Wire Bending SpaceDimensions & Main SwitchStandard 15.969 (406) 15.969 (406) 15.969 (406) 13.125 (333)Oversize 25.969 (660) 25.969 (660) 25.969 (660) 23.125 (587)Crimp 18.687 (475) 18.250 (464) 18.250 (464) 15.937 (405)Standard withSubfeed— — — 13.125 (333)Standard withFeed-thru— — — 13.125 (333)Main Lugs Only Wire Bending SpacePANELBOARDS10 Standard trim is for space without door. Surface flushone piece trim is available for 32" (813mm) wide circuitbreaker panel.10-56Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

PanelboardsPower and DistributionType P5Shown with Standard Mains, Top Fedand Surface TrimCatalog number is for aluminum mainbus. For optional copper main buschange “A” in position 11 to “C”.Panels are top feed, surface mounted.For bottom feed, change “T” in position12 to “B”. For flush mounting,change “S” in position 13 to “F”.SelectionReplace fifth and sixth positionin panelboard catalog number,with alternate main breaker code.Use price adders from main breakersection table. Horizontally mounted.Main Lugs Only — shown with aluminum bus, top fed, and surface trims.MaximumUnit208Y/120V 240/120V 120/240V or 250 Vdc MaxPanel Space 3-Phase, 4-Wire List 3-Phase, 4-Wire List 1-Phase, 3-Wire ListAmpere Rating (inches) Catalog Number Price $ Catalog Number Price $ Catalog Number Price $30 P5C60ML800ATS 2020.00 P5B60ML800ATS 2020.00 P5A60ML800ATS 2020.00800 45 P5C75ML800ATS 2130.00 P5B75ML800ATS 2130.00 P5A75ML800ATS 2130.0060 P5C90ML800ATS 2260.00 P5B90ML800ATS 2260.00 P5A90ML800ATS 2260.0030 P5C60ML101ATS 2460.00 P5B60ML101ATS 2460.00 P5A60ML101ATS 2460.001000 45 P5C75ML101ATS 2610.00 P5B75ML101ATS 2610.00 P5A75ML101ATS 2610.0060 P5C90ML101ATS 2750.00 P5B90ML101ATS 2750.00 P5A90ML101ATS 2750.0030 P5C60ML120ATS 2900.00 P5B60ML120ATS 2900.00 P5A60ML120ATS 2900.001200 45 P5C75ML120ATS 3070.00 P5B75ML120ATS 3070.00 P5A75ML120ATS 3070.0060 P5C90ML120ATS 3230.00 P5B90ML120ATS 3230.00 P5A90ML120ATS 3230.00MaximumUnit240 480Y/277V 480V Panel Space 3-Phase, 3-Wire List 3-Phase, 4-Wire List 1-Phase, 3-Wire ListAmpere Rating (inches) Catalog Number Price $ Catalog Number Price $ Catalog Number Price $30 P5D60ML800ATS 1610.00 P5E60ML800ATS 2020.00 P5F60ML800ATS 1610.00800 45 P5D75ML800ATS 1720.00 P5E75ML800ATS 2130.00 P5F75ML800ATS 1720.0060 P5D90ML800ATS 1800.00 P5E90ML800ATS 2260.00 P5F90ML800ATS 1800.0030 P5D60ML101ATS 1960.00 P5E60ML101ATS 2460.00 P5F60ML101ATS 1960.001000 45 P5D75ML101ATS 2070.00 P5E75ML101ATS 2610.00 P5F75ML101ATS 2070.0060 P5D90ML101ATS 2150.00 P5E90ML101ATS 2750.00 P5F90ML101ATS 2150.0030 P5D60ML120ATS 2300.00 P5E60ML120ATS 2900.00 P5F60ML120ATS 2300.001200 45 P5D75ML120ATS 2430.00 P5E75ML120ATS 3070.00 P5F75ML120ATS 2430.0060 P5D90ML120ATS 2550.00 P5E90ML120ATS 3230.00 P5F90ML120ATS 2550.00Main Circuit Breaker — shown with aluminum bus, top fed, and surface trims.MaximumUnit208Y/120V 240/120V 120/240V or 250 Vdc MaxPanel Space 3-Phase, 4-Wire List 3-Phase, 4-Wire List 1-Phase, 3-Wire ListAmpere Rating (inches) Catalog Number Price $ Catalog Number Price $ Catalog Number Price $21.25 P5C60M1800ATS 8140.00 P5B60M1800ATS 8140.00 P5A60M1800ATS 6820.00800 36.25 P5C75M1800ATS 8590.00 P5B75M1800ATS 8590.00 P5A75M1800ATS 7190.0051.25 P5C90M1800ATS 9040.00 P5B90M1800ATS 9040.00 P5A90M1800ATS 7570.0020 P5C60N1120ATS 12900.00 P5B60N1120ATS 12900.00 P5A60N1120ATS 11590.001200 35 P5C75N1120ATS 13620.00 P5B75N1120ATS 13620.00 P5A75N1120ATS 12230.0050 P5C90N1120ATS 14350.00 P5B90N1120ATS 14350.00 P5A90N1120ATS 12880.00MaximumUnit240 480Y/277V 480V Panel Space 3-Phase, 4-Wire List 3-Phase, 4-Wire List 1-Phase, 3-Wire ListAmpere Rating (inches) Catalog Number Price $ Catalog Number Price $ Catalog Number Price $21.25 P5D60M1800ATS 7720.00 P5E60M1800ATS 8140.00 P5F60M1800ATS 7720.00800 36.25 P5D75M1800ATS 8160.00 P5E75M1800ATS 8590.00 P5F75M1800ATS 8160.0051.25 P5D90M1800ATS 8590.00 P5E90M1800ATS 9040.00 P5F90M1800ATS 8590.0020 P5D60N1120ATS 12310.00 P5E60N1120ATS 12900.00 P5F60N1120ATS 12310.001200 35 P5D75N1120ATS 13010.00 P5E75N1120ATS 13620.00 P5F75N1120ATS 13010.0050 P5D90N1120ATS 13680.00 P5E90N1120ATS 14350.00 P5F90N1120ATS 13680.00For inches / millimeters conversion, see Application Datasection. For 600V, change “F” in position 3 to “G”. Price onlybranch breakers with 600V ratings. Alternate main breaker requires additional 1.25" unitspace.10 PANELBOARDSDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-57

PanelboardsPower and DistributionAlternate Main Breaker Selection SelectionMain Fusible Switch (fuses not included)MaximumUnit208Y/120V 240/120V 120/240VPanel Space 3-Phase, 4-Wire List 3-Phase, 4-Wire List 1-Phase, 3-Wire ListAmpere Rating (inches) Catalog Number Price $ Catalog Number Price $ Catalog Number Price $4002040P5C75MS400ATSP5C90MS400ATS3480.003660.00P5B75MS400ATSP5B90MS400ATS3480.003660.00P5A75MS400ATSP5A90MS400ATS2790.002940.006002540P5C75MS600ATSP5C90MS600ATS4920.005170.00P5B75MS600ATSP5B90MS600ATS4920.005170.00P5A75MS600ATSP5A90MS600ATS4170.004380.00800 28.7543.75P5C75MS800ATSP5C90MS800ATS7640.008030.00P5B75MS800ATSP5B90MS800ATS7640.008030.00P5A75MS800ATSP5A90MS800ATS6290.006610.001200 28.7543.75P5C75MS120ATSP5C90MS120ATS9770.0010290.00P5B75MS120ATSP5B90MS120ATS9770.0010290.00P5A75MS120ATSP5A90MS120ATS8070.008500.00MaximumUnit240V 480Y/277V 480V Panel Space 3-Phase, 3-Wire List 3-Phase, 4-Wire List 3-Phase, 3-Wire ListAmpere Rating (inches) Catalog Number Price $ Catalog Number Price $ Catalog Number Price $4002540P5D75MS400ATSP5D90MS400ATS3480.003660.00P5E75MS400ATSP5E90MS400ATS4650.004900.00P5F75MS400ATSP5F90MS400ATS3890.004100.006002540P5D75MS600ATSP5D90MS600ATS4920.005170.00P5E75MS600ATSP5E90MS600ATS5190.005480.00P5F75MS600ATSP5F90MS600ATS4920.005180.00800 28.7543.75P5D75MS800ATSP5D90MS800ATS7640.008030.00P5E75MS800ATSP5E90MS800ATS7650.008050.00P5F75MS800ATSP5F90MS800ATS7250.007620.001200 28.7543.75P5D75MS120ATSP5D90MS120ATS9770.0010290.00P5E75MS120ATSP5E90MS120ATS9770.0010290.00P5F75MS120ATSP5F90MS120ATS9240.009730.00Maximum IR (KA)Ampere Breaker CatalogSymmetrical AmperesListRating Type Number 240V AC 480V AC 600V AC Price $ Available Trip ValuesNMX M1 65 35 25 STD 600, 700, 800800 HMX M2 100 65 50 1130. 600, 700, 800LMX M3 200 100 65 3260. 600, 700, 800LMD6 LMXD6 65 50 25 590. 500, 600, 700, 800HLMD6 HD 100 65 50 1870. 500, 600, 700, 800MD6 M6 65 50 25 1710. 500, 600, 700, 800800HMD6 HM 100 65 50 2370. 500, 600, 700, 800CMD6 CM 200 100 50 4370. 500, 600, 700, 800SMD6 SM 65 50 25 5860. 600, 700, 800SHMD6 S8 100 65 50 3540. 600, 700, 800SCMD6 C8 200 100 65 5860. 500, 600, 800NNX N1 65 35 25 STD 800, 900, 1000, 12001200 HNX N2 100 65 50 1130. 800, 900, 1000, 1200LNX N3 200 100 65 2500. 800, 900, 1000, 1200ND6 N6 65 50 25 1190. 800, 900, 1000, 1200HND6 HN 100 65 50 2370. 800, 900, 1000, 12001200CND6 CN 200 100 50 2500. 900, 1000, 1200SND6 SN 65 50 25 2440. 900, 1000, 1200SHND6 SI 100 65 50 4080. 800, 900, 1000, 1200SCND6 CI 200 100 65 5080. 800, 900, 1000, 1200PANELBOARDS10For inches / millimeters conversion, see ApplicationData section. For 600V, change “F” in position 3 to “G”. Price onlybranch breakers with 600V ratings. For ground fault, see page 10-62. Replace “MB” in catalog number with code letter.Use adders from this table. 800 and 1200 ampere switches have “L” class fuseprovisions (Type HCP).10-58Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

PanelboardsPower and DistributionType P5Branch Circuit Breakers Space price covers cost of housing frame plate withblank cover plate. Provision price includes all necessarymounting hardware, less circuit breaker, and includeshousing frame cover plate with breaker handle opening. 1 to 6 poles may be mounted in 3.75" of unit space. Accessories such as shunt trips on three pole breakersrequire 6.25" of unit space. HED4 1-pole 15–30A = 65,000 IR35–100A = 25,000 IRSelectionAvailableProvisionsMounting Height Maximum Interrupting RatingBreaker Trip ValueList Price Installed $Space for(inches)(KA)Type Ampere Ratings 1-Pole 2-Pole 3-Pole $ Future $ Twin Single 120V 120/240V 240V 277V 480Y/277 480V 600V 250V DCBL15, 20, 30, 40, 50, 60 100. 170. 250. 35. 55. — — 10 — — — — — —70 160. 190. 290. 35. 55. 3.75 — — 10 — — — — — —80, 90, 100 — 230. 330. 35. 55. — — 10 — — — — — —BL (HID) 15, 20, 30 110. 190. — 35. 55. 3.75 — — 10 — — — — — —BAF (arc fault) 15, 20 220. 380. — 35. 55. 3.75 — 10 10 — — — — — —BAFH(arc fault) 15, 20 280. 450. — 35. 55. 3.75 — 22 22 — — — — — —BLF (GFCI)15, 20, 3040, 50, 60220.—250.290.——35.35.55.55. 3.75 ————1010————————————BLE (EQ GFI) 15, 20, 30 200. 250. — 35. 55. 3.75 — — 10 — — — — — —BLEH15, 20, 3040, 50, 60420.—530.530.——35.35.55.55.3.75 3.75 ————1010————————————BGL (SWN) 15, 20, 30 — 180. 230. 35. 55. 3.75 — — 10 — — — — — —BL (240V)R15, 20, 30, 40, 50, 60, 7070, 80, 90, 100——210.310.——35.35.55.55. 3.75 ——————1010——————————BLH (120V)15, 20, 30, 40, 50, 60 130. 240. 340. 35. 55. 3.75 — — 22 — — — — — —70 — 340. 380. 35. 55. 3.75 — — 22 — — — — — —80, 90, 100 225. 280. 480. 35. 55. — — 22 — — — — — —BLHF (GFCI)15, 20, 3040, 50, 60250.—340.———35.35.55.55. 3.75 ————2222————————————HBL15, 20, 30, 40, 50, 6070, 80, 90, 100130.—320.420.400.540.35.35.5555. 3.75 ————2222————————————BQD15, 20, 30, 40, 50, 6070, 80, 90, 100130.200.320.420.400.540.35.35.55.55. 3.75 ——————6565——1414————1414NGB15—60 140. 460. 510. 35. 50. 100 100 100 25 25 25 — 1470—100 210. 500. 660. 35. 50. 3.75 — 100 100 100 25 25 25 — 14110—125 — 820. 1190. 35. 50. 100 100 100 25 25 25 — 14NEB15—60 270. 450. 590. 35. 50. 85 85 85 35 35 35 — 3570—100 300. 510. 670. 35. 50. 3.75 — 85 85 85 35 35 35 — 35110—125 730.= 1290. 1440. 35. 50. 85 85 85 35 35 35 — 35HEB15—60 390. 690. 910. 35. 50. 100 100 100 65 65 65 — 4270—100 430. 760. 990. 35. 50. 3.75 — 100 100 100 65 65 65 — 42110—125 1220.= 2150. 2280. 35. 50. 100 100 100 65 65 65 — 42ED4 15, 20, 30, 40, 50, 60 175. 570. 630. 75. 110. — — — 65 — 18 18 — 3070, 80, 90, 100 260. 620. 820. 75. 110. 3.75 — — — 65 — 18 18 — 30110, 125 — 1010. 1470. 75. 110. — — — 65 — 18 18 — 30HED4 15, 20, 30, 40, 50, 60 490. 850. 1120. 75. 110. — — — 100 25 42 — 3070, 80, 90, 100 490. 950. 1220. 75. 110. 3.75 — — — 100 — 25 42 — 30110, 125 — 2660. 2830. 75. 110. — — — 100 — 42 42 — 30HHED615, 20, 30, 40, 50, 60 — 940. 1250. 75. 110. — — — 100 — — 65 25 —70, 80, 90, 100 — 1060. 1360. 75. 110. 3.75 — — — 100 — — 65 25 —110, 125 — 2970. 3130. 75. 110. — — — 100 — — 65 25 —CED615, 20, 30, 40, 50, 60, 70, 80, 90, 100110, 125——1970.3160.2410.3980.75.75.110.110.3.75 ———————200—————200———30—QJ2 60, 70, 80, 90, 100, 125, 150, 175, 200, 225 — 720. 940. 75. 150. 5 5 — — 10 — — — — —QJH2 60, 70, 80, 90, 100, 125, 150, 175, 200, 225 — 740. 1250. 75. 150. 5 5 — — 22 — — — — —QJ2H 60, 70, 80, 90, 100, 125, 150, 175, 200, 225 — 1030. 1540. 75. 150. 5 5 — — 42 — — — — —FXD6 70, 80, 90, 100, 125, 150, 175, 200, 225 — 1250. 1590. 75. 320. 5 5 — — 65 — — 35 — 30HFD6 70, 80, 90, 100, 125, 150, 175, 200, 225 — 2750. 3350. 75. 320. 5 5 — — 100 — — 65 — 30CFD6 70, 80, 90, 100, 125, 150, 175, 200, 225 — 3500. 4470. 75. 320. — 5 — — 200 — — 200 — 30FXD6 250 — 2190. 2700. 75. 320. 5 5 — — 65 — — 35 — 30HFD6 250 — 3940. 4240. 75. 320. 5 5 — — 100 — — 65 — 30CFD6 250 — 4590. 5580. 75. 320. — 5 — — 200 — — 200 — 30JXD2 200, 225, 250, 300, 350, 400 — 2150. 2350. 130. 350. 8.75 8.75 — — 65 — — — — 30JXD6 200, 225, 250, 300, 350, 400 — 2230. 2750. 130. 350. 8.75 8.75 — — — — — 35 25 30HJD6 200, 225, 250, 300, 350, 400 — 3690. 4380. 130. 350. 8.75 8.75 — — 100 — — 65 35 30CJD6 200, 225, 250, 300, 350, 400 — 4910. 6310. 130. 350. — 8.75 — — 200 — — 150 100 30SJD6 200, 225, 250, 300, 350, 400 — — 5960. 130. 350. — 8.75 — — 65 — — 35 25 —SHJD6 200, 300, 400 — — 6610. 130. 350. — 8.75 — — 100 — — 65 35 —LXD6 450, 500, 600 — 3540. 4580. 140. 640. — — — — 65 — — 35 25 30HLD6 250, 300, 350, 400, 450, 500, 600 — 4280. 5360. 140. 640. — 8.75 — — 100 — — 65 35 30CLD6 450, 500, 600 — 6600. 9720. 140. 640. — — — — 200 — — 150 100 30SLD6 300, 400, 500, 600 — — 6600. 140. 640. — — — — 65 — — 35 25 —SHLD6 300, 400, 500, 600 — — 6680. 140. 640. — 8.75 — — 100 — — 65 35 —LMD6 500, 600, 700, 800 — 5060. 6520. 210. 1380. — 8.75 — — 65 — — 50 25 30HLMD6 500, 600, 700, 800 — 6510. 8060. 210. 1380. — 8.75 — — 100 — — 65 50 30MD6 500, 600, 700, 800 — 7450. 9500. 210. 1380. — — — — 65 — — 35 25 30HMD6 500, 600, 700, 800 — 9320. 10870. 210. 1380. — 10 — — 100 — — 65 35 30CMD6 500, 600, 700, 800 — 8010. 12160. 210. 1380. — — — — 200 — — 150 100 30SMD6 600, 700, 800 — — 10260. 210. 1380. — — — — 65 — — 35 25 —SHMD6 600, 700, 800 — — 11030. 210. 1380. — 10 — — 100 — — 65 50 —ND6 800, 900, 1000, 1200 — — 13040. 220. 1560. — — — — 65 — — 50 25 30HND6 800, 900, 1000, 1200 — — 13670. 220. 1560. — 10 — — 100 — — 65 35 30CND6 800, 900, 1000, 1200 — — 17690. 220. 1560. — — — — 200 — — 150 100 30SND6 900, 1000, 1200 — — 13030. 220. 1560. — — — — 65 — — 35 25 —SHND6 800, 1000, 1200 — — 13900. 220. 1560. — 10 — — 100 — — 65 50 —NMX 600, 700, 800 — 4590. 5930. 210. 1720. — 8.75 — — 65 — — 35 25 30HMX 600, 700, 800 — 5910. 7320. 210. 1720. — 8.75 — — 100 — — 65 50 30LMX 600, 700, 800 — 7280. 11060. 210. 1720. — 8.75 — — 200 — — 100 65 30NNX 800, 900, 1000, 1200 — 8910. 11850. 210. 1720. — 10 — — 65 — — 35 25 30HNX 800, 900, 1000, 1200 — 10490. 12430. 210. 1720. — 10 — — 100 — — 65 50 30LNX 800, 900, 1000, 1200 — 15430. 17690. 210. 1720. — 10 — — 200 — — 100 65 30For inches / millimeters conversion, see Application Data For 600V applications, ED6 available at same list price.section. Ground fault is not available on branchSensitrip breakers. HED4 3-Pole = 42,000 IRDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-5910 PANELBOARDS

PanelboardsPower and DistributionBranch Switch Selection (fuses not included)Selection/DimensionsProvisions MountingProvisions MountingAmpereList Price $ Space for HeightAmpereList Price $ Space for HeightRating 3-Pole 2-Pole Only $ Future $ (inches)Rating 3-Pole 2-Pole Only $ Future $ (inches)240V — Twin MountedNEC Fuse Clips 600V — Twin MountedNEC Fuse Clips 30-30 965. 815. 105. 140. 2 1 ⁄2 30-30 1400. — 225. 295. 7 1 ⁄230-30 1020. 870. 170. 225. 530-60 1400. — 225. 295. 7 1 ⁄230-60 1020. 880. 170. 225. 560-60 1400. — 225. 295. 7 1 ⁄260-60 1020. 900. 170. 225. 560-100 1525. — 225. 295. 7 1 ⁄260-100 1315. 1040. 225. 255. 7 1 100-100 1610. — 225. 295. 7 1 ⁄2⁄2100-100 1410. 1050. 225. 255. 7 1 200-200 2895. — 275. 435. 10⁄2200-200 2510. — – 275. 435. 10600V — Single MountedNEC Fuse Clips 240V — Single Mounted NEC Fuse Clips 100 1070. — 225. 295. 7 1 ⁄2030 830. — — 280. 7 1 ⁄2200 1465. — 275. 445. 10060 830. — — 280. 7 1 ⁄2400 3170. — 475. 475. 150100 1080. — 225. 295. 7 1 ⁄2400 (HCP) 9295. — 680. 680.0200 1355. — 275. 435. 10600 3860. — 475. 475. 150200 — 2015. 225. 295. 7 1 ⁄2600 (HCP) 9295. — 680. 680.0400 2545. 2015. 475. 475. 15800 (HCP) 9295. — 680. 680. 16 1 ⁄40600 3540. 4740. 475. 475. 151200 (HCP) 11100. — 680. 680. 16 1 ⁄40800 (HCP) 9295. 4740. 680. 680. 16 1 ⁄41200 (HCP) 11100. 5110. 680. 680. 16 1 ⁄4Branch Breaker Side Gutter Inches (mm)Reference Panel Width 38 in.Letter Inches (mm) AA 14.0 (356)B 10.0 (254)C 9.5 (242)D 8.25 (210)E 8.125 (207)F 7.615 (193)G 11.769 (299)H 13.425 (341)I 8.956 (227)J, M, N, O 13.0 (330)K 12.0 (305)P 10.0 (254)Q 8.0 (203)R, S 10.5 (267)T 9.3 (236)U 10.3 (262)V 13.0 (330)W 10.75 (273)BCDEFGHIJKMNOPQRSTUVWBLBLH, HBL, BQOED4, ED6HED4, HHED6QJ2, QJH2QJ2HFXD6, FD6HFD6JXD6, JD6HJD6CED6BLBLH, HBL, BQOED4, ED6HED4, HHED6QJ2, QJH2QJ2HFXD6, FD6HFD6JXD6, JD6HJD6CED6CFD6JXD6, JD6, LXD6, LD6, SLD6SJD6, SHJD6, HLD6, SHLD6CJD6, CLD6MD6, ND6, CMD6, CND6, HMD6, HND6, NNX, HNX, LNXSMD6, SND6LMD6, HLMD6, NMX, HMX, LMXVB 2.5" 30A Gutter VB 2.5" 30A GutterVB 5" 30–60A Gutter VB 5" 30–60A GutterVB 7.5" 60–100A Gutter VB 7.5" 60–100A GutterVB 10" 200A Gutter VB 10" 200A GutterVB 7.5" 100A GutterVB 10" 200A GutterVB 15" 400–600A GutterHCP 16–25" 400–1200A GutterNGBNGBNEB, HEBNEB, HEBABCDEFGHIJKMNOPQRSTUVWPANELBOARDS10For inches / millimeters conversion, see Application Datasection. Space price covers cost of housing frame plate withoutbreaker handle opening.Provisions include all necessary mounting hardwareless breakers. For Class J, R or T fuse clip prices, refer to page 10-62. 800 and 1200 ampere switches have class “L” fuseprovisions. (Type HCP). NEC fuse clips only.10-60Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

PanelboardsPower and DistributionTypes P5 and SPP/FPP, F2 (12 3/4" deep)Connecting Strap Kits Circuit BreakerFor use with Sentron Deep or Type S5 power panels12.75" DeepUnitBoxBreaker Height Catalog ListType Mounting (inches) Number Price $BL /BQD Twin 3.75 SBLBD 902.00NGB Twin 3.75 SNBD 902.00NEB, HEB Twin 3.75 SNBD 902.00ED Twin 3.75 SE6D 902.00CED6 Single 3.75 SCED 882.00QJ Twin 5. SQJD 1622.00FD6 Twin 5. SF6D 1622.00CFD6 Single 5. SCFD 1622.00JXD2, JXD6 Single 8.75 SJ1D 2254.00JXD2, JXD6 Twin 8.75 SJ2D 2488.00SJD6 Single 8.75 SSJ1D 2488.00CJD6 Single 8.75 SCJD 2254.00SCJD6 Single 8.75 SSCJD 2254.00LD6 Single 8.75 SL6D 2668.00SLD6 Single 8.75 SSL6D 2668.00CLD6 Single 8.75 SCLD 2668.00SCLD6 Single 8.75 SSCLD 2668.00LMD6, HLMD6 Single 8.75 SLM1D 3240.00MD6, HMD6,CMD6Single 10. SMND 3847.00SMD6, SHMD6 Single 10. SSMND 4097.00ND6, HND6 Single 10. SMND 3847.00SND6, SHND6,SCND6Single 10. SSMND 4097.00NM, HM, LM,SNM, SHMSingle 8.75. MG1D 3317.00NN, HN, LN,SNN, SHNSingle 10. NG1D 3939.00Connecting Strap Kits FusibleFor use with Sentron FPP Deep or Type F2/P5power panelsUnit12. 75" Deep BoxAmpere Height Catalog ListRating (inches) Number Price $30–30 2.5 F602D 210.0030–30 5, 7.5 F657D 254.0030–60 5, 7.5 F657D 254.0060–60 5, 7.5 F657D 254.0060–100 5, 7.5 F657D 254.00100–100 5, 7.5 F657D 254.00100 7.5 F657D 254.00200 7.5 F657D 254.00200 10 F671D 393.00200–200 10 F672D 430.00400–600 15 F6150D 186.00800–1200 16.25 F6162D 1366.00Selection/DimensionsBlank PlatesCircuit Breaker and Vacu-Break For use with Sentron SPP and Type S5power panelsHeight Catalog List(inches) Number Price $1.25 6FPB01 196.002.5 6FPB02 224.003.75 6FPB03 224.005.0 6FPB05 224.0010.0 6FPB10 302.00Filler PlatesFor use with Sentron SSP and Type S5power panelsFillerPlate ListBreaker Catalog PriceType Number $BL, BLH, HBL,BQD, ED2, ED4,ED6, HED4,QF3 2.80 per poleHED6, HHED6For inches / millimeters conversion, see Application Datasection. Normal stock item. Includes cover plate and mounting hardware,less circuit breaker. Also fits Types FCI, FCII, SB1 and SB2 switchboards. 800 –1200 amp units are HCP switch.Note: When a front filler plate is not completely filled withbreakers, the openings in the unused space must beclosed with filler plates selected from this table.10 PANELBOARDSDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-61

Sentron ® PanelboardsModifications and AdditionsType P5When required, special constructionsor additions to standard panelboardsmay be specified for all factoryassembledPower and DistributionPanelboards. Below and on the nextpage are listed many of those availablefor Type S5 panelboards. In no casedo these apply to Narrow (Column)Width Lighting Panelboards orUnassembled Panelboards.List Price $Unit SpacePhases 800A 1200A (Additional inches)1-Phase 570. 700. 1.253-Phase 655. 740. 1.257. MLO Compression Lugs —Aluminum Lugs for Use WithCopper or Aluminum CableAvailable as main lugs and neutral lug.Price includes required aluminumcompression lugs. See page 10-64.6. Split Bus Ampere List Price $ List Price $ List Price $Rating Class J Class R Class T8. Compression Lugs For CircuitBreakers — See Section 6.9. Circuit Breaker Main — With1. Type 3R/12Vacu-Break Branch PanelboardsList Price appropriate main breaker panel,Price $ then add list prices of desired vacu-breakDescription 38" branches and accessories.Panelboard Construction: Single Door . . . 1485.10. Vacu-Break Main — With CircuitComplete enclosure does not requireBreaker Branch Panelboardsa trim.Price appropriate main switch panel, thenadd list price of desired circuit breaker2. Painted Finish see page 10-72. branches and accessories.11. Grounding of Panelboards3. Miscellaneous AccessoriesNon-Insulated Equipment Ground BusListPrice $ Including Ground Lug . . . . . . .StandardAll Insulated Equipment Ground BusDescriptionPanels Including Ground Lug . . .$15. per panelNameplate — laminated, engraved . . . . 50.Tamper-Resistant Screws – per panel . . 70.List4. Devices Mounted on Gutter Cover— Includes Device, Mounting —Wired or Unwired see page 10-72DescriptionST W/CPTBFI — Blown FusePrice $2240.1200.5. Feed-Thru Lugs BFI/BFT — Blown Fuse/Blown Fuse Trip 3180.GF/BFT — Ground Fault & 10810.(One Set Per Panel)Blown Fuse TripUnit SpaceBFT — Blown Fuse Trip 1985.AmpereList Price $ (Additional inches)GF w/Test Panel 10810.Rating 3-Phase 1-Phase MLO400 245. 245. 10600 455. 455. 1013. Fuse Clip Provisions800 615. 615. 17.5(Add to 250 Volts or 600 Volts Unit1200 765. 765. 17.5Prices Per Switch)30 55. 55. N/A60 55. 55. N/A100 85. 85. 160.200 85. 85. 180.400, 600 85. 85. 285.Selection10PANELBOARDSFor inches / millimeters conversion, see ApplicationData section. For use on main lug, main breaker or main switchpanels without subfeed breakers. For increase in panelboard height — Consult localsales office. Price includes increased enclosure heightif required. Ground bar not installed in box. For factory installation,add $100. List Price per panel. Price 600 Volt 7 1 /2" high units. At 250 Volts — available on 5" unit only. Class “J” clips not required on 600V twin 200A switch.Class “R” and “T” clips not available on this switch.10-62Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

Sentron ® PanelboardsModifications and AdditionsType P514. Remote Control SwitchesSwitch Type Modification920 TAKES 20.0 unit space911≤ 800A 25" to unit space≥ 800A 30" unit spaceLEN≤ 60 AMPS 10" unit space> 60 AMPS 15" unit space15. Ground Fault on Main BreakerAmpere ListDescription Rating Price $Conventional Ground Fault includes:Ground Fault Relay, GroundSensor, CPT and Shunt Trip 800-1200 7330.Test and Monitor Panel 1070.Ground Fault add to SensitripIII breaker price (takes 5" ofunit space) 800-1200 2500.16. Time Clocks Sangamo, Tork or Paragon time clockcan be supplied, mounted in panelboardcabinet. For required increase inenclosure dimensions, consult local salesoffice. Price appropriate panelboard, thenadd list price below.19. Main BusStandard main bus and ground bus aretin plated aluminum. For copper mainbus, neutral bus and ground bus addfrom the table for each panel. CopperNeutral Bar $115. List Price.Catalog 800–1200Main Bus Number Ampere $Silver Plated Copper E 1220.1000A per sq. in. Copper D 1070.750A per sq. in. Aluminum B 645.20. Copper Lugs —For Main Lug Only PanelsStandard main lugs and neutral lugs aretin plated aluminum, UL listed for usewith aluminum/copper cables. Pricebelow is for one panel and includescopper lugs for main lugs and neutral lugs,and must be used with copper cables.Main BusListAmpere Rating Price $800-1200 225.21. Shunt Trip on Main and Branches See Breaker Section for list price on this option.SelectionListDescription Price $Time Clock (one or two pole, single ordouble throw contacts; three pole,single throw) 277V maximum withplain dial 1070.Add for —Astronomical dial 210.An omitting device 75.Reserve power or carryover 2450.Space and mounting provisions only 540.17. Circuit Breaker AccessoriesHandle Blocking DeviceBlocks handle in either the “ON” or“OFF” position — See page 10-73Padlocking Device — Padlocks in“OFF” position — See page 10-7318. Ground Fault Sensing Relay KitEquipment Protection ED Frames(30 ma) — See page 10-7322. Spanner Wrenches(for Vacu-Break Switches)ListAmpere Rating Price $30-250 460.23. Alternate LugsAmperage Box Height PriceStyle Rating Alternate Connectors Addition Addition $Deduct 5.0"800 (3)#3/0 AWG - 750 Kcmil Cu or AlUnit Spacefrom availableunit spaceDeduct 7.5"MLO 1000 (4)#3/0 AWG - 750 Kcmil Cu or AlUnit Spacefrom availableunit spaceDeduct 7.5"1200 (4)#3/0 AWG - 750 Kcmil Cu or AlUnit Spacefrom availableunit spaceMain Deduct 3.75"Switch(1)#3/0 AWG - 750 Kcmil Cu or Al or Unit Space400Vacu- (2)#3/0 AWG 250 Kcmil Cu or Al from availableBreakunit space390.510.510.125. Available in 90" high enclosure only. Unit space is42 1 /2" with Test and Monitor Panel; 45" without Testand Monitor Panel. Not available on Sensitrip III. For required unit space — consult local sales office.Price includes increased enclosure height if required. Replace ”A” in position 11 of catalog number. Shunt Trip on 100A frame breakers increases mountingheight to 6.25" for twin mounting. Must price “D” or “B” from item #19 above. See section (6) circuit breakers for 100% rated circuitbreaker requirements.10 PANELBOARDSDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-63

PanelboardsModifications and AdditionsType 1 Enclosure Modifications and AdditionsSelection24. Compression LugsStyle Amp Rating Breaker Type Compression Connectors Box Height Addition Price Addition $3-Phase 4-Wire = $255800 N/A (3)#3/0 AWG - 500 Kcmil Cu or Al2-Wire = $1903-Phase 4-Wire = $350Deduct 5.0" Unit Space 3-Phase 3-Wire = $190from available unit space 1-Phase 3-Wire = $190MLO 1000 N/A (4)#3/0 AWG - 500 Kcmil Cu or Al2-Wire = $2553-Phase 4-Wire = $350Deduct 5.0" Unit Space 3-Phase 3-Wire = $255from available unit space 1-Phase 3-Wire = $2551200 N/A (4)#3/0 AWG - 500 Kcmil Cu or Al2-Wire = $255Deduct 5.0" Unit Space 3-Phase 3-Wire = $255from available unit space 1-Phase 3-Wire = $255MD6, 3-Phase 4-Wire = $305HMD6, CMD6,3-Phase 3-Wire = $235800(3)#2/0 AWG - 500 Kcmil Cu or Al 0MainSMD6, SHMD6, 1-Phase 3-Wire = $235BreakerSCMD6 2-Wire = $235(S5 Only) ND6, HND6, 3-Phase 4-Wire = $3051200CND6, SND6,(4)#250 - 500 Kcmil Cu or Al 03-Phase 3-Wire = $235SHND6,1-Phase 3-Wire = $235SCND6 2-Wire = $23510PANELBOARDSPanel After MarketP5 Description Adder $ Price $BoxesPB860 P5 box 38 W X 12.75 Dp X 60 Ht. Standard 595.PB875 P5 box 38 W X 12.75 Dp X 75 Ht. Standard 595.PB890 P5 box 38 W X 12.75 Dp X 90 Ht. Standard 595.PBD860 P5 box 38 W X 14.50 Dp X 60 Ht. 615.PBD875 P5 box 38 W X 14.50 Dp X 75 Ht. 615.PBD890 P5 box 38 W X 14.50 Dp X 90 Ht. 615.TrimsP560V P5 Std (4 piece trim) vented 60" Standard 615.P575V P5 Std (4 piece trim) vented 75" Standard 645.P590V P5 Std (4 piece trim) vented 90" Standard 670.P560NV P5 Std (4 piece trim) unvented 60" 615.P575NV P5 Std (4 piece trim) unvented 75" 645.P590NV P5 Std (4 piece trim) unvented 90" 670.P560VHG P5 Std (4 piece trim) vented 60" w/Hinged gutter covers 290. 910.P575VHG P5 Std (4 piece trim) vented 75" w/Hinged gutter covers 290. 935.P590VHG P5 Std (4 piece trim) vented 90" w/Hinged gutter covers 290. 965.P560NVHG P5 Std (4 piece trim) unvented 60" w/ Hinged gutter covers 290. 910.P575NVHG P5 Std (4 piece trim) unvented 75" w/Hinged gutter covers 290. 935.P590NVHG P5 Std (4 piece trim) unvented 90" w/Hinged gutter covers 290. 965.P560VD P5 Std (1 PC. Door) vented 60" Use 14.5" deep box 170. 730.P575VD P5 Std (1 PC. Door) vented 75" Use 14.5" deep box 170. 760.P590VD P5 Std (1 PC. Door) vented 90" Use 14.5" deep box 170. 785.P560NVD P5 Std (1 PC. Door) unvented 60" Use 14.5" deep box 170. 730.P575NVD P5 Std (1 PC. Door) unvented 75" Use 14.5" deep box 170. 760.P590NVD P5 Std (1 PC. Door) unvented 90" Use 14.5" deep box 170. 785.P560VDD P5 Std (1 PC. Door in door) vented 60" Use 14.5" deep box 360. 1090.P575VDD P5 Std (1 PC. Door in door) vented 75" Use 14.5" deep box 360. 1115.P590VDD P5 Std (1 PC. Door in door) vented 90" Use 14.5" deep box 360. 1140.P560NVDD P5 Std (1 PC. Door in door) unvented 60" Use 14.5" deep box 360. 1090.P575NVDD P5 Std (1 PC. Door in door) unvented 75" Use 14.5" deep box 360. 1115.P590NVDD P5 Std (1 PC. Door in door) unvented 90" Use 14.5" deep box 360. 1140.Flush Mounting KitsF860 Flush kit for P5 60" Ht. 140.F875 Flush kit for P5 75" Ht. 140.F890 Flush kit for P5 90" Ht. 140.Type 3R/12WP860 P5 3R/12 60" — 140.WP875 P5 3R/12 75" — 140.WP890 P5 3R/12 90" — 140. Required with door over breaker handles. Un-vented trims require amps per square inch bussing. Requires 14.5 deep box. No adder if ordered at time of order entry.10-64Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

PanelboardsType P5 PanelboardsType 1 BoxBox is symmetricalBox To WallMounting Holes4.375 in.[ 111 ]Dimensions10.0 in.[ 254 ]Recommended Conduit Area6.635 in.[ 169 ]36.0 in.[ 914 ]Interior To BoxMountingStubs60 in.,[ 1524 ]75 in.,[ 1905 ]90 in.[ 2286 ]6.635 in.[ 169 ]24 in.[ 610 ]30 in.[ 762 ]38 in.[ 965 ]4.375 in.[ 111 ]12.75 in.[ 324Type 3R and 3R/12 Box15.88 in.[ 403 ].375 in.[ 10 ]15.81 in.[ 402 ]MountingBracket60 in.,[ 1524 ]75 in.,[ 1905 ]90 in.[ 2286 ].375 in.[ 10 ]15.81 in.[ 402 ]38 in.[ 965 ]40 in.[ 1016 ]42 in.[ 1067 ] Dimensions are interior of the box. Add 5/8" to width for absolutedimension. Add 1/8" to height for absolute dimension.Dimensions shown in inches and millimeters [ ]..87 in.[ 22 ]14.25 in.[ 362 ]10 PANELBOARDSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-65

PanelboardsCircuit Breaker / Column TypeType C1240 Volts AC Maximum250 Ampere Mains250 Ampere Maximum BranchUL Short Circuit Rating —200,000 IR MaximumBranch Breaker SymmetricalInterrupting RatingBased on Underwriters’ Test ProcedureType C2480Y/277 Volts AC Maximum250 Ampere Mains250 Ampere Maximum BranchUL Short Circuit Rating —100,000 IR MaximumMeets 2002 NEC wire bendingrequirement, section 312–6.PanelboardsListed by Underwriter’s Laboratories,Inc., under “Panelboards” File #E2269.Meets Federal SpecificationW–C375B/Gen.Service240 Volts Maximum. 1-Phase, 3-Wire, or3-Phase, 4-Wire.Panelboards Fronts and DoorsStandard panelboards are furnished withtrim with a flush door lock. All are factoryassembled for ease of installation. Frontsare fabricated from code gauge steel andfinished ANSI-61.Main Breakers C1BL, BLH and HBL frame breakers aremounted horizontally. All other framesare mounted vertically.Main Breakers C2BQD frame breakers are mountedhorizontally. All other frames aremounted vertically.BoxesC1 — 7 5 ⁄8" wide, 5 3 ⁄4" deep.C2 — 8 1 ⁄2" wide, 5 3 ⁄4" deep.Branch Breaker Side GuttersCircuitSide GutterType Breaker (inches)C1 BL, BLH, HBL, BQD 3.505C2 BQD 3.5Weight–ApproximateTotal panelboard weight when filled witha normal quantity of breakers andaccessories is:*About 3 lbs. per inch of box height.Gauge Steel BoxesType Width Height Gauge SteelC1 7 5 ⁄8" 48", 73", 85" #14C2 8 1 ⁄2" 48", 73", 85" #14FrontsC1 7 5 ⁄8" 48", 73", 85" #14C2 8 1 ⁄2" 48", 73", 85" #14Main Breaker ConnectorsAmpereRating Connectors suitable for Cu or Al100 (1) #14–1/0 AWG125 (1) #4–1/0 AWG225 (1) #6 AWG–300 kcmil250 (1) #4 AWG–350 kcmil Al(1) #6 AWG–350 kcmil CuMain Lug Connectors125 (1) #6 AWG–350 kcmil250 (1) #6 AWG–350 kcmilGeneralSeries Connected Short Circuit RatingsThe term “Series Connected ShortCircuit Rating” refers to the applicationof series connected circuit breakers in acombination that allows some circuitbreakers to have lower individualinterrupting ratings than the availablefault current. This is permitted as long asthe series combination has been testedand certified by UL.The table below lists specific main andbranch breaker series combinations thatare marked on all C1 panels. Allcombinations shown have been testedfor use in C1 panelboards and are ULListed. Other combinations are available.See series rating information in theCircuit Breaker Section, pages 6-146 to6-150. Ratings other than those shownbelow must be specified at the time oforder entry.PANELBOARDS10For inches / millimeters conversion, see Application Data section. Connector ranges indicated do not apply to all mainbreaker types. Refer to molded case circuit breakerstandard pressure wire connectors in the breakersection of this catalog for the wire ranges for a specificbreaker frame.10-66Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

PanelboardsCircuit Breaker / Column TypeMain Lugs Only C1Main Circuit Breaker C1Selection240 Volts MaximumMaximum Maximum Box 208Y/120V 120/240VPanel 1-Pole Height 3-Phase, 4-Wire List 1-Phase, 3-Wire ListAmpere Rating Circuits (inches) Catalog Number Price $ Catalog Number Price $18 48 C1C18ML125CTS 1030.00 C1A18ML125CTS 1190.00125 30 73 C1C30ML125CTS 1250.00 C1A30ML125CTS 1170.0042 85 C1C42ML125CTS 1440.00 C1A42ML125CTS 1370.0018 48 C1C18ML250CTS 1100.00 C1A18ML250CTS 1010.00250 30 73 C1C30ML250CTS 1290.00 C1A30ML250CTS 1200.0042 85 C1C42ML250CTS 1520.00 C1A42ML250CTS 1420.00240 Volts Maximum18 48 C1C18BL100CTS 1360.00 C1A18BL100CTS 1250.00100 30 73 C1C30BL100CTS 1570.00 C1A30BL100CTS 1440.0042 85 C1C42BL100CTS 1840.00 C1A42BL100CTS 1660.0018 48 C1C18E4125CTS 1910.00 C1A18E4125CTS 1790.00125 30 73 C1C30E4125CTS 2110.00 C1A30E4125CTS 2020.0042 85 C1C42E4125CTS 2390.00 C1A42E4125CTS 2200.0018 48 C1C18QJ225CTS 2540.00 C1A18QJ225CTS 2150.00225 30 73 C1C30QJ225CTS 2750.00 C1A30QJ225CTS 2350.0042 85 C1C42QJ225CTS 2950.00 C1A42QJ225CTS 2550.0018 48 C1C18FX250CTS 2950.00 C1A18FX250CTS 2550.00250 30 73 C1C30FX250CTS 3140.00 C1A30FX250CTS 2760.0042 85 C1C42FX250CTS 3350.00 C1A42FX250CTS 2960.00Main Lugs Only C2480Y/277 Volts MaximumMaximum Maximum Box 480Y/277VPanel 1-Pole Height 3-Phase, 4-Wire ListAmpere Rating Circuits (inches) Catalog Number Price $18 48 C2E18ML125CTS 1030.00125 30 73 C2E30ML125CTS 1260.0042 85 C2E42ML125CTS 1440.0018 48 C2E18ML250CTS 1100.00250 30 73 C2E30ML250CTS 1290.0042 85 C2E42ML250CTS 1520.00Main Circuit Breaker C2480Y/277 Volts Maximum18 48 C2E18BD100CTS 1710.00100 30 73 C2E30BD100CTS 1930.0042 85 C2E42BD100CTS 2190.0018 48 C2E18E4125CTS 1910.00125 30 73 C2E30E4125CTS 2110.0042 85 C2E42E4125CTS 2390.0018 48 C2E18FX225CTS 2710.00225 30 73 C2E30FX225CTS 2980.0042 85 C2E42FX225CTS 3240.0018 48 C2E18FX250CTS 2950.00250 30 73 C2E30FX250CTS 3140.0042 85 C2E42FX250CTS 3350.00Alternate Main Breaker Selection C1MaximumAmpere Breaker Interrupting Catalog ListRating Type Rating (KA) Number Price $ Available Trip ValuesBL 10 BL STD 50, 60, 70, 80, 90, 100100 BLH 22 LH 65. 50, 60, 70, 80, 90, 100HBL 65 HL 405. 50, 60, 70, 80, 90, 100125ED4HED465100E4H4STD540.50, 60, 70, 80, 90, 100, 110, 12550, 60, 70, 80, 90, 100, 110, 125QJ2 10 QJ STD 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225225 QJH2 22 QH 100. 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225QJ2-H 42 Q2 160. 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225225FXD6HFD6 65100FXHF140.1760.70, 80, 90, 100, 110, 125, 150, 175, 200, 22570, 80, 90, 100, 110, 125, 150, 175, 200, 225250FXD6HFD6 65100FXHFSTD1900.25025010 PANELBOARDSFor inches / millimeters conversion, see Application Datasection. BL, BLH, HBL and BQD are horizontally mounted.All others vertically mounted. Interchangeable trip breakers such as FD6 and HFD6cannot be back fed. Must be top feed only.Discount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-67

10PANELBOARDSPanelboardsCircuit Breaker / Column TypeBranch Breaker Selection C1 No increase in box height. Space is already built intoC1 panel. BL, BLH, HBL and BQD are horizontally mounted.All others vertically mounted. Interchangeable trip breakers such as FD6 and HFD6cannot be back fed. Must be top feed only.SelectionAvailableProvisionsMaximum InterruptingBreaker AmpereList Price Installed $forRating (kA)Type Rating 1-Pole 2-Pole 3-Pole Future $ 120V 120/240V 240V15, 20, 30, 40, 50, 60 25. 45. 140. — — 10 —BL (120V) 70 35. 85. 190. — — 10 —70, 80, 90, 100 — 140. 210. — — 10 —BL (HID) 15, 20, 30 55. 80. — — — — —BLF (GFCI)15, 20, 30 140. 240. — — 10 — —40, 50, 60 — 250. — — 10 — —BLE (EQGFI) 15, 20, 30 220. 330. — — 10 — —BGL (SWN) 15, 20, 30 — 100. 130. — 10 — —BLR (240V)15, 20, 30, 40, 50, 60 — 105. — — — — 1070, 80, 90, 100 — 185. — — — — 1015, 20, 30, 40, 50, 60 35. 85. 220. — — 22 —BLH (120V) 70 75. 130. 300. — — 22 —70, 80, 90, 100 — 200. 310. — — 22 —BLHF (GFCI)15, 20, 30 155. 270. — — — 22 —40, 50, 60 — 291. — — — 22 —HBL15, 20, 30, 40, 50 65. 150. 290. — — 65 6560, 70, 80, 90, 100 — 400. 480. — — 65 65BQD15, 20, 30, 40, 50, 60 85. 270. 290. — — — 6570, 80, 90, 100 200. 400. 480. — — — 65Subfeed Breakers — Limit One Per Panel C1ED415, 20, 30, 40, 50, 60, 70, 80, 90, 100110, 125—–—–420.750.540.910.100.100.————6565HED415, 20, 30, 40, 50, 60, 70, 80, 90, 100 —– 690. 910. 100. — — 65110, 125 —– 1270. 1450. 100. — — 100QJ2 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225 —– 420. 880. 150. — — 10QJH2 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225 —– 930. 1140. 150. — — 22QJ2-H 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225 —– 1080. 1410. 150. — — 42FXD6 70, 80, 90, 100, 110, 125, 150, 175, 200, 225, 250 —– 1220. 1540. 200. — — 65HFD6 70, 80, 90, 100, 110, 125, 150, 175, 200, 225, 250 —– 2440. 3010. 200. — — 100Alternate Main Breaker Selection C2Ampere Breaker Catalog ListRating Type IR Number Price $ Available Trip ValuesBQD 14 BD STD 50, 60, 70, 80, 90, 100100ED4ED61825E4E655.65.50, 60, 70, 80, 90, 10050, 60, 70, 80, 90, 100HED4 42 H4 290. 50, 60, 70, 80, 90, 100HHED6 65 H6 390. 50, 60, 70, 80, 90, 100ED4 18 E4 STD 110, 125125 ED6 25 E6 25. 110, 125HED4 42 H4 290. 110, 125HHED6 65 H6 390. 110, 125225FXD6 35 FX STD 70, 80, 90, 100, 110, 125, 150, 175, 200, 225HFD6 65 HF 1760. 70, 80, 90, 100, 110, 125, 150, 175, 200, 225250FXD6HFD63565FXHFSTD1760.250250Branch Circuit Breakers C2AvailableProvisionsMaximum InterruptingBreaker AmpereList Price Installed $forRating (kA)Type Rating 1-Pole 2-Pole 3-Pole Future $ 277V 480/277V 480VBQD15, 20, 30, 40, 50, 6070, 80, 90, 10085.200.270.400.290.480.— –— –14141414——Subfeed Breakers — Limit One Per Panel C2ED415, 20, 30, 40, 50, 60, 70, 80, 90, 100 —– 420. 540. 100. — 18 18110, 125 —– 750. 910. 100. — 18 18ED615, 20, 30, 40, 50, 60, 70, 80, 90, 100 —– 530. 860. 100. — — 25110, 125 —– 1090. 1090. 100. — — 25HED415, 20, 30, 40, 50, 60, 70, 80, 90, 100 —– 690. 910. 100. — — 42110, 125 —– 1270. 1450. 100. — — 42FXD6 70, 80, 90, 100, 110, 125, 150, 175, 200, 225, 250 —– 1220. 1540. 200. — — 35HFD6 70, 80, 90, 100, 110, 125, 150, 175, 200, 225, 250 —– 2440. 3010. 200. — — 6510-68Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

Sentron ® PanelboardsCircuit Breaker / Column Type, Modifications and AdditionsType C1/C2When required, special constructions oradditions to standard panelboards maybe specified for factory-assembledcolumn panelboards.Box ModificationsListDescription Price $Gasketed 670.Metal Card Holder 65.Welded Metal Card Holder 125.Nameplate 55.Al Ground BarSTDCu Ground Bar 40.Insulated Al Ground Bar 40.Insulated Cu Ground Bar 75.Interior ModificationsListDescription Price $Feed-Thru Lugs 180.Cu Neutral Lugs 110.Cu main Lugs 125A 115.Cu main Lugs 250A 190.Box Sizing ChartCertain modifications such as subfeedbreakers and feed-thru lugs requireadditional unit space. Use this chart todetermine proper enclosure size.BoxHeightPanel Configuration(inches)All MLO 18 Circuit 48All MLO 30 Circuit 73All MLO 42 Circuit 85All MLO 18 Circuit with feed-thru lugs 73All MLO 30 Circuit with feed-thru lugs 85All MLO 42 Circuit with feed-thru lugs 85All MLO 18 Circuit with subfeed breaker 73All MLO 30 Circuit with subfeed breaker 85All Main Breaker 18 Circuit 48All Main Breaker 30 Circuit 73All Main Breaker 42 Circuit 85All Main Breaker 18 Circuit with feed-thru lugs 73All Main Breaker 30 Circuit with feed-thru lugs 85All Main Breaker 42 Circuit with feed-thru lugs 85All Main Breaker 18 Circuit with subfeed breaker 73All Main Breaker 30 Circuit with subfeed breaker 85SelectionColumn ExtensionAvailable in various standard lengths,extensions are 5 1 ⁄4 inches deep and7 inches wide.Height (inches) Catalog Number List Price $14 LXX-14 150.0020 LXX-20 160.0026 LXX-26 180.0032 LXX-32 180.0038 LXX-38 210.0041 LXX-41 210.0044 LXX-44 235.0053 LXX-53 255.0056 LXX-56 275.0062 LXX-62 285.0065 LXX-65 305.0068 LXX-68 305.0074 LXX-74 330.0080 LXX-80 360.0086 LXX-86 380.00Pull BoxesTwo styles of pull boxes are available,top and front mounted. When the paneland its extensions are mounted in astructural WF beam a front mounted pullbox is required. When the panels aresurface mounted, a top mounted pull boxmay be used. Provisions are made sothat the neutral bar may be mounted inthe pull box when required.(Front mounted pull box dimensions are14" H. X 20" W.)Description Catalog Number List Price $Top Mount LXXP-T 180.00Front Mount LXX50-F 445.0010 PANELBOARDSFor inches / millimeters conversion, see Application Datasection. Includes 50" extension. Price additional extensionsfrom above.Discount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-69

Sentron ®PanelboardsTelephone and Equipment CabinetsTelephone and Equipment Cabinets: Conform to requirements of Underwriters’Laboratories, Inc., for all cabinets and boxes bearing their label. Surface and Flushenclosures: box and front constructed of code-gauge steel, box galvanized and frontonly finished with light gray, ANSI-61.Boxes: Standard construction has blank end walls, without knockouts.Fronts: Siemens Fas Latch fronts feature concealed hinges and fastening screws. MatchP1 and P2 Panels in appearance. Two locks supplied on doors more than 51 inches high.Selection/DimensionsCabinetsDimensionsList Price $ List Price $(inches)Catalog Without WithHeight Width Depth Number Backboard BackboardWith FAS Latch Front23 20 5.75 TC 23B 300. 350.26 20 5.75 TC 26B 320. 370.29 20 5.75 TC 29B 340. 390.32 20 5.75 TC 32B 360. 410.35 20 5.75 TC 35B 380. 430.38 20 5.75 TC 38B 400. 450.41 20 5.75 TC 41B 420. 470.44 20 5.75 TC 44B 440. 490.47 20 5.75 TC 47B 460. 510.50 20 5.75 TC 50B 480. 530.53 20 5.75 TC 53B 500. 550.56 20 5.75 TC 56B 520. 570.59 20 5.75 TC 59B 540. 590.62 20 5.75 TC 62B 560. 610.65 20 5.75 TC 65B 580. 630.23 24 5.75 TCW 23B 420. 470.29 24 5.75 TCW 29B 460. 510.35 24 5.75 TCW 35B 500. 550.38 24 5.75 TCW 38B 520. 570.41 24 5.75 TCW 41B 540. 590.44 24 5.75 TCW 44B 560. 610.53 24 5.75 TCW 53B 620. 670.59 24 5.75 TCW 59B 640. 690.DimensionsPANELBOARDS10For inches / millimeters conversion, see Application Datasection. Add S for Surface, F for Flush.10-70Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

Sentron ®PanelboardsEnclosure ModificationsCustomer Relay CabinetsDimensions Catalog ListH W D Number Price $23 20 5.75 RC(1)23B 355.0026 20 5.75 RC(1)26B 378.0029 20 5.75 RC(1)29B 386.0032 20 5.75 RC(1)32B 394.0035 20 5.75 RC(1)35B 401.0038 20 5.75 RC(1)38B 562.0041 20 5.75 RC(1)41B 594.0044 20 5.75 RC(1)44B 594.0047 20 5.75 RC(1)47B 604.0050 20 5.75 RC(1)50B 625.0053 20 5.75 RC(1)53B 636.0056 20 5.75 RC(1)56B 647.0059 20 5.75 RC(1)59B 678.0062 20 5.75 RC(1)62B 700.0065 20 5.75 RC(1)65B 753.0068 20 5.75 RC(1)68B 784.0071 20 5.75 RC(1)71B 827.0074 20 5.75 RC(1)74B 859.0077 20 5.75 RC(1)77B 912.00Note: Replace (1) with ”S” for surface applications and ”F” for flush applications.Additional Enclosures ModificationsDescription List Price $Strip Heaters 910.Humidstat control 1600.Thermostat control 1600.SelectionCustomer Relay CabinetsDimensions Catalog ListH W D Number Price $23 24 5.75 RCW(1)23B 372.0026 24 5.75 RCW(1)26B 396.0029 24 5.75 RCW(1)29B 402.0032 24 5.75 RCW(1)32B 411.0035 24 5.75 RCW(1)35B 419.0038 24 5.75 RCW(1)38B 583.0041 24 5.75 RCW(1)41B 615.0044 24 5.75 RCW(1)44B 615.0047 24 5.75 RCW(1)47B 636.0050 24 5.75 RCW(1)50B 647.0053 24 5.75 RCW(1)53B 657.0056 24 5.75 RCW(1)56B 678.0059 24 5.75 RCW(1)59B 710.0062 24 5.75 RCW(1)62B 721.0065 24 5.75 RCW(1)65B 795.0068 24 5.75 RCW(1)68B 816.0071 24 5.75 RCW(1)71B 869.0074 24 5.75 RCW(1)74B 890.0077 24 5.75 RCW(1)77B 943.00 List Price includes Fas latch trim and steel mounting pan. If 2 or more cabinets are to bestacked, specify on order (no extra charge for connecting hardware).ASCO #911 — 3-polesMechanically held remote control switch suitable for allASCO #920 classes of loads (Total system loads). Voltage rated Siemens LENMechanically held to 480V AC, UL listed. Electrically HeldAmpere List Price $ List Price $Rating 2-Pole 3-Pole List Price $ 2-Pole 3-Pole20 — — — — —30 2680. 3075. — 1270. 1495.60 3360. 4315. — 1580. 1920.75 3360. 4315. — — —100 3795. 4940. 7015. 2055. 2415.150 5215. 6615. 9475. 3360. 4015.200 5970. 7430. — 3360. 4015.225 6455. 8090. — — —260 — — 19400. — —300 — — 26935. — —400 — — 44520. — —600 — — 44520. — —800 — — 46270. — —1000 — — 60270. — —1200 — — 65530. — —Application (See individual panel sections for application information)Remote Control Switch ModificationListPriceDescription Adder $Separate Door in Dead Front Over 410.Switch (P2 as main only)Auxiliary Contacts (Mounted Not Wired) Ea. 490.2-Wire Control (add 6" to panel height.) 850.Control Power TransformerListPriceSize VA Adder $0,1 50 245.2 75 350.3 150 510.4 250 625.10 PANELBOARDSDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-71

PanelboardsModifications and AdditionsEnd Walls Only for 5.75 in. Deep Box End Walls Only for 7.75 in. Deep BoxWith knockoutsBlank$30. List Each20. List EachStandard Enclosures Made From SpecialMaterials - Type P1, P2, P3Aluminum, Stainless Steel, and Chrome Plated Enclosures.Price standard panelboard and add from the following table.AluminumAlumiteMill FinishMaterialStainless SteelList Price $Up to 20 in. WOver 20 in. WBox 1185. 1920.Front 1540. 3440.Box 1045. 1540.Front 1845. 2570.General Purpose Box 1845. 2600.Grade (Brush Front) Front 3045. 5000.Chrome PlatePolished Finish Front Only 1185. 1450.Addition WidthWidth Lighting Panel Distribution PanelsPer 2" 205 350Consult factory for dimension limitations.Addition DepthDepth Lighting Panel Distribution PanelsPer 2" 150 250Consult factory for dimension limitations.With knockoutsBlank$40. List Each30. List EachSelectionMiscellaneousList Price $Description Panel Width 20 in. Panel Over 20 in.Conduit Hubs — Up to1 1/2 in. Each 60. 60.2 in. to2 1/2 in. Each 90. 90.3 in. Each 110. 110.Increased Gauge Steel - 10 gauge MaximumBox and Front 265. 265.Box or Front Only 185. 185.Painted FinishSet-up Charge Net 85.Box Only 30.Alternate Color Trim 30.Special DrillingsTemplate Must Accompany Order 90.Front And Door ModificationsVault Handle 480.Cutout in Trim 250.Two Panels with Common Trim 340.Panels having doors over 48 in. high, 2 locks are standard. Voids UL label. Lighting panels only. Field must supply dimensional information and panelorientation.Devices Mounted On Trim-IncludesDevice, Mounting (Wired or Unwired)Toggle Switch-SPST or 3-way; 15A, 277 V MaximumFirst Switch 350.Each Additional 210.Pilot Light-General Purpose, Neon or IncandescentFirst Light 350.Each Additional 210.PushbuttonFirst Device 350.Each Additional 210.PANELBOARDS1010-72Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PBSB

PanelboardsCircuit Breaker Accessories and ModificationsBlank Plates—Vacu-BreakFor use with VB-23, VB-30, VB-32 and Uni-PowerSwitchboards12 in. Units—23 in. Wide 17 in. Units—30 in. andEnclosures Only32 in. Wide EnclosuresUnit Height Catalog List Catalog List(in.) Number Price $ Number Price $2 1/2 VB2F025 121.00 VB7F025 163.005 VB2F050 139.00 VB7F050 163.007 1/2 VB2F075 139.00 VB7F075 181.0010 VB2F100 163.00 VB2F100 163.00Conduit Enclosing Shield (Panel Skirts)Sheet metal to cover conduits above or below a standardpanelboard box.Skirt Length Width List Price $ 4 Side Adder $8, 9, 11, 12 20.00 125. 110.14, 17, 18, 23, 25 20.00 225. 110.26, 27, 28, 29, 30, 31,32, 33, 34, 35, 3620.00 320. 110.37, 38, 39, 40, 41, 42, 43, 44 20.00 405. 110.8, 9, 11, 12 24.00 200. 145.14, 17, 18, 23, 25 24.00 320. 145.26, 27, 28, 29, 30, 31,32, 33, 34, 35, 3624.00 435. 145.37, 38, 39, 40, 41, 42, 43, 44 24.00 530. 145.Panel Skirts Standard LengthSelectionMolded Case Switches(Non-Automatic Circuit Interrupters)When Molded case switches are substituted for thermalbreakers deduct from the installed thermal breaker price:Ampere Breaker Number of PolesRating Frame 3-Pole 2-Pole100 ED2 95. 75.ED4 95. 80.ED6 95. 85.225 QJ2 60. 35.250 FXD6 200. 170.400 JXD2 405. 325.JXD6 455. 370.600 LXD6 760. 590.800 MD6 1790. 1350.1200 ND6 3650. NA3 Sides Open Back4 Sides Screw Front8, 9, 10,11, 12, 14, 17, 18, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34,35, 36, 37, 38, 39, 40, 41, 42, 43, 4410 PANELBOARDSDiscount Schedule PBSB Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 10-73

NotesPANELBOARDS1010-74Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

11SPEEDFAX TM 2007-2008 Lighting ControlsContentsLCP3000EZ Panels 11-2LCP300EZ Catalog Numbering System & Accessories 11-3LCP300EZ Accessory Options 11-4LCP300EZ Device Descriptions 11-5 – 11-6LCP3000EZ LAN Software (ComBridge Studio) 11-7 – 11-8LCP3000EZ Wiring Diagrams 11-9 – 11-10LCP3000EZ Other Applications 11-1111 LIGHTINGCONTROLSBenefits of Lighting Control SystemsThe benefits of lighting control systems include enhanced comfort,productivity, security, environmental aesthetics and of course, energysavings. In terms of energy savings, many lighting control systems caneasily pay for themselves in less than two years.Siemens has developed a new lighting control system which is simple inboth design and installation. It efficiently covers a complex range oflighting schemes with a minimal investment of time and money.The Siemens LCP3000EZ Lighting Control Systems has been designedto make lighting control genuinely accessible for any building, whetherthe need is a single ON-OFF panel, or a complicated fully networkedsystem of control panels sequencing on-off schemes across a hundredfloors. In short, lighting control is something you can do quicklyand affordably.For production details and pricing, please contact your nearestlocal Siemens sales office or contact the Siemens Call Centerat 1-800-427-2256 for technical information.Code RequirementsANSI/ASHRAE/IESNA require positive lighting control beyond thehistorical light switch and circuit breaker disconnect panel. The codestates: Interior lighting in non-residential buildings larger than 5000square feet and not in operation 24 hours a day shall be controlled withan automatic control device to shut off building lighting in all spaces.This automatic control device shall function on a scheduled basis or anoccupancy sensor or a signal from an other control or alarm system.The LCP3000EZ is California Title 24 Certified.Residential Commercial Industrial

11LIGHTINGCONTROLSLighting ControlsLCP3000EZ PanelsSystem FeaturesThe Siemens LCP3000EZ is fullyassembled and delivered with allspecified relays, digital inputs, powersupply and RS232 interface installed inthe enclosure. Wall mount the enclosure.Connect the 120V AC power supply.connect the loads to the relays. Connectthe inputs. Then with a PDA with serialport support (RS232) (running Palm OS3.5 or higher), configure which inputscontrol which output/s (relay/s) and thesystem is ready to go. The configurationsoftware also can be run on a PC usingPalm Emulator software. Theconfiguration software and the PalmEmulator are provided with every orderat no charge.If your system has more than one panel,simply interconnect the panels with an18 AWG solid copper twisted pair.The Siemens LCP3000EZ lightingcontrol system comes with anabundance of standard operatingfeatures and the intelligence to meetvirtually any lighting control application.Each panel is equipped with an RS232interface for easy configuration of inputsand outputs. Any panel in the networkcan be configured from any other panelin the same network. Other optionsinclude Ethernet interface, PC software,two different time clocks (4 and 16control points, which provide the abilityto set 324 or 500 schedulesrespectively), motion sensors, dualsensors for light and temperature andmore. These options enable you to havea lighting control system that can meeteven the most demanding applications.Each individual device holds its ownoperating program in non-volatilememory. There is no central or mastercontroller. This feature prevents entiresystem shut down, which could happenon systems with a central logic board.NetworkingUp to 10 panels can be networkedtogether without the need for anyadditional cards or devices. Withoptional Web access devices andComBridge Studio Software, the usercan network up to 500 panels. TheLCP3000EZ interfaces with any BuildingAutomation System using OPC.Web Access SoftwareThe optional Web access software allowsthe user access any device in theLCP3000EZ system. This allows control ofGeneralany relay from a PC. Password protectionallows partial control to individual users.For example, the employee can turn ONor OFF the office lights from any PC.EnclosureThe LCP3000EZ is enclosed in a NEMA1, UL listed enclosure with hinged doorand hinged dead fronts. There are twodead fronts, one for the low voltage(24V) section and one for the linevoltage load relays. There is a barrierbetween the two sections.Technical LiteratureYou are able to review and download acopy of the LCP3000EZ Lighting ControlSelection and Application Guide athttp://www.sea.siemens.com/power/product/pdprodlc_3000ez.html. A printedversion of the Selection and ApplicationGuide, No. LCSA-03000-0604, or theTechnical Data Sheet, No. LCSS-01002-0304, can be requested through theSiemens Call Center at 1-800-427-2256.System Specifications▪ NEMA 1, surface mount,optional key lock and flush mount kit▪ Enclosures are always 20" wide and5 3 ⁄4" deep; height depends onnumber of outputs:- 24" high for up to 16 outputs- 32" high for up to 32 outputs- 40" high for up to 48 output relays▪ Load relays:- Mechanically held- Visual position indicator- Have manual override- Built in timer which can be set in30 minute intervals up to 6 hours- Eight relays per module- Can be programmed as groups tocontrol two or three pole loads- Are rated 20 Amp, 277 Volt (480V“Y” with ground three phase loads)▪ All panel size accept a maximum of32 digital (switch) inputs:- Rated 24V AC/DC- Can be configured to acceptmaintained, or momentary inputs- Four inputs per module▪ 4 control channels time clock allows324 schedules▪ 16 control channels time clock allows500 schedules. Four channels haveastronomical clock feature- Both time clocks have 10 yearsbattery back up- Automatic day light savings timeadjustment- Time of day (TOD) schedules- Warn Off - 5 minutes▪ RS-232 interface in every panel▪ Network up to 10 panels twisted pairwire, without additional cards▪ Network up to 500 panels withoptional Web access devices andComBridge Studio Software▪ Ambient Conditions:- Ambient operating temperature:23˚F - 113˚F (-5... +45˚C)- Ambient temperature (non-op):-13˚F - 158˚F (-25... +70˚C)- Relative Humidity(non-condensing): 5% to 93%11-2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Lighting ControlsLCP3000EZLCP3000EZ Catalog Numbering SystemEnclosure Height3 = 24" (up to 16 relays = 2 output (relay) modules)4 = 32" (up to 32 relays = 4 output (relay) modules)5 = 40" (up to 48 relays = 6 output (relay) modules)AccessoriesCatalog No. 5WG1 70 -8X -Z11 LIGHTINGCONTROLSPanel DesignationA, B, C, D, E, F,G, H, J or KNumber of Input ModulesSelect 0, 8, 16, 24 or 32inputs. Divide the number ofinputs by 8 to get the numberto enter at this location.i.e. 24 inputs / 8 = 3.Number of Output Modules1 to 6 (8 outputs per module;i.e. 48 outputs / 8 outputs permodule = 6 output modules).Enclosure OptionsBlank = None1 = Flush Mounting Kit2 = Key Lock3 = Key Lock and Flush Mounting KitTo format the LCP3000EZ catalognumber proceed as follows:1. Enclosure Height: Determine thenumber of relays and provisions forfuture relay additions your installationrequires. Round the number up to thenearest multiple of 8 (relays come inblocks of 8 relays).- 8 to 16 outputs (relays) enclosureheight is 24". Enter 3 in theEnclosure Height field- 24 to 32 outputs (relays) enclosureheight is 32". Enter 4 in theEnclosure Height field- 40 to 48 outputs (relays) enclosureheight is 40". Enter 5 in theEnclosure Height field2. Panel designation: First panel is A,second panel is B, third panel is C, etc.Last panel is K. There is no Panel I.3. Number of input Modules:Determine the number of inputs yoursystem requires and round the numberup to the nearest multiple of 8 (inputmodules are packaged as 2 blocks of 4;therefore, they are supplied in groups of8). Divide the number of inputs by 8 todetermine the number of input modules:- 8 inputs: enter 1 in the Number ofInput Modules field- 16 inputs: enter 2 in the Number ofInput Modules field- 24 inputs: enter 3 in the Number ofInput Modules field- 32 inputs: enter 4 in the Number ofInput Modules field4. Number of output (relay) modules:Determine the number of relays, andprovisions for future relay additions yourinstallation requires; then round thenumber up to the nearest 8 (relays comein blocks of 8 relays). Divide the numberof relays by 8 to determine the numberof output (relay) modules:- 8 relays: enter 1 for Number ofOutput (relay) Modules field- 16 relays: enter 2 in the Number ofOutput (relay) Modules field- 24 relays: enter 3 in the Number ofOutput (relay) Modules field- 32 relays: enter 4 in the Number ofOutput (relay) Modules field- 40 relays: enter 5 in the Number ofOutput (relay) Modules field- 48 relays: enter 6 in the Number ofOutput (relay) Modules field5. Enclosure options: Determine if keylock, flush mounting kit of both arerequired.- No option required: leave theEnclosure Options field blank- Flush mount kit: enter 1 in theEnclosure Options field- Key lock: enter 2 in the EnclosureOptions field- Key lock and flush mount kit: enter 3in the Enclosure Options fieldExample:A system needs two panels:The first panel requires 20 inputs and 30outputs (relays).The second panel requires 31 inputs and44 outputs (relays).Key lock is required in both panels.First Panel:1. Enclosure height: Number of outputs(relays) = 30, round up to the nearestmultiple of 8 which is 32. 32/8 = 4. Enter 4in the Enclosure Height field.2. Panel designation: This is the first panel.Enter A in the Panel Designation field.3. Number of input modules: Number ofinputs = 20, round up to the nearestmultiple of 8 which is 24. 24/8 = 3. Enter 3in the Number of Input Modules field4. Number of output (relay) modules:Number of relays = 30 round up to thenearest multiple of 8 which is 32.32/8 = 4. Enter 4 in the Number of Output(relay) Modules field.Second Panel:5. Enclosure height: Number of outputs(relays) = 44, round up to the nearestmultiple of 8 which is 48. 48/8 = 6. Enter 5in the Enclosure Height field.6. Panel designation: This is the secondpanel. Enter B in the Panel Designationfield.7. Number of input modules: Number ofinputs = 31, round up to the nearestmultiple of 8 which is 32. 32/8 = 4. Enter 4in the Number of Input Modules field.8. Number of output (relay) modules:Number of relays = 42 round up to thenearest multiple of 8 which is 48.48/8 = 6. Enter 6 in the Number of Output(relay) Modules field.Applicable to all panels:9. Enclosure options: Key lock required.Enter 2 in the Enclosure Options field.Finalized catalog numbers:First panel is: 5WG1 704-8XA34-Z2Second panel is: 5WG1 705-8XB46-Z2External optionsAfter you have finished with theLCP3000EZ catalog number, select anyexternal options for the project. i.e.:- Motion sensors (two SIEMENS motionsensors are supported per panel). Thirdparty motion sensors with dry contactscan be used; This type is used inconjunction with the Input Modules- Outdoor light sensor (one is supportedby each network of 10 panels- Override or key switch (you may selectthis option, although the binary inputscan also be used for this purpose- Web Access software (ComBridgeStudio)- OPC interface- E-mail services- Data Base servicesSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 11-3

11LIGHTINGCONTROLSLighting ControlsLCP3000EZOptions (not included in panel catalog number)5WG1 372-5EY01-Z-A2014 control channels time clock5WG1 373-5EY01-Z-A20216 control channels time clock5WG1 255-2AB11Motion sensor5WG1 114-2AB02-Z-A221 Wall mounted bus coupler for motion sensor(s). Panel A*5WG1 114-2AB02-Z-A231 Wall mounted bus coupler for motion sensor(s). Panel A*5WG1 114-2AB02-Z-B222 Wall mounted bus coupler for motion sensor(s). Panel B*5WG1 114-2AB02-Z-B232 Wall mounted bus coupler for motion sensor(s). Panel B*5WG1 114-2AB02-Z-C223 Wall mounted bus coupler for motion sensor(s). Panel C*5WG1 114-2AB02-Z-C233 Wall mounted bus coupler for motion sensor(s). Panel C*5WG1 114-2AB02-Z-D224 Wall mounted bus coupler for motion sensor(s). Panel D*5WG1 114-2AB02-Z-D234 Wall mounted bus coupler for motion sensor(s). Panel D*5WG1 114-2AB02-Z-E225 Wall mounted bus coupler for motion sensor(s). Panel E*5WG1 114-2AB02-Z-E235 Wall mounted bus coupler for motion sensor(s). Panel E*5WG1 114-2AB02-Z-F226 Wall mounted bus coupler for motion sensor(s). Panel F*5WG1 114-2AB02-Z-F236 Wall mounted bus coupler for motion sensor(s). Panel F*5WG1 114-2AB02-Z-G227 Wall mounted bus coupler for motion sensor(s). Panel G*5WG1 114-2AB02-Z-G237 Wall mounted bus coupler for motion sensor(s). Panel G*5WG1 114-2AB02-Z-H228 Wall mounted bus coupler for motion sensor(s). Panel H*5WG1 114-2AB02-Z-H238 Wall mounted bus coupler for motion sensor(s). Panel H*5WG1 114-2AB02-Z-J229 Wall mounted bus coupler for motion sensor(s). Panel J*5WG1 114-2AB02-Z-J239 Wall mounted bus coupler for motion sensor(s). Panel J*5WG1 114-2AB02-Z-K230 Wall mounted bus coupler for motion sensor(s). Panel K*5WG1 114-2AB02-Z-K240 Wall mounted bus coupler for motion sensor(s). Panel K*5WG1 588-2CB11-Z-A211Touch Panel, Panel A5WG1 588-2CB11-Z-B212Touch Panel, Panel B5WG1 588-2CB11-Z-C213Touch Panel, Panel C5WG1 588-2CB11-Z-D214Touch Panel, Panel D5WG1 588-2CB11-Z-E215Touch Panel, Panel E5WG1 588-2CB11-Z-F216Touch Panel, Panel F5WG1 588-2CB11-Z-G217Touch Panel, Panel G5WG1 588-2CB11-Z-H218Touch Panel, Panel H5WG1 588-2CB11-Z-J219Touch Panel, Panel J5WG1 588-2CB11-Z-K220Touch Panel, Panel K5WG1 254-3EY01-Z-A203Outdoor ambient light level sensor5WG1 220-2CB02-Z-A204Key switch63101-32-01 Software for LAN connection (for monitoring and control)63101-32-10 5 license extension for LAN software63101-32-06 OPC services for connection with BAS, LAN software required63101-32-01 LAN software e-mail services63101-32-04 LAN software database services63101-32-08 LAN software Visual EditorAccessories5WG1 376-5EY01-Z-A2014 Control channels5WG1 254-3EY01-Z-A203Outdoor ambient light sensor5WG1 148-1AB21-Z-A251IP Interface* Each panel supports 2 SIEMENS motion sensors. Catalog number corresponds to bus coupling 1 and bus coupling2 for each panel. The actual motion sensing device plugs into the bus coupling unit.Notes about components catalog number:– First 12 characters are the “out of the box” component catalog number (i.e. 5WG1 588 2CB11).– Z is a position holder in the catalog number sequence.– Last four characters are for a component’s specific location in the system (for example K220; where K indicatesthat the device belongs to panel K and 220 is the device’s unique address).11-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Lighting ControlsAccessoriesSelectionDescription of devicesAll devices described here are interconnected via 18 AWG solid copper twisted pair or via a communication bus on the DIN railsincorporated into the panels.Output (relay) Device (5WG1512-1CB01): Block of 8 277 V,20 amp, relays with timers,visual indication and manualoverride capability.Input Device (5WG1 261-1CB01): Block of 4 digitalinputs. It can take inputsfrom a set of dry contacts(maintained or momentary).Inputs requires 24 volt suppliedby the power supply.Sixteen Control Channels TimeClock (5WG1 373-5EY01): It has16 control channel. Each channelcan be seen by the system as aninput. This device can beprogrammed with up to 500different schedules, automaticday light saving time and 10 years battery back up. The firstfour control channels can be programmed as astronomicaltime clock. This feature allows to control the outside lightsbased on date and geographical location, rather than with anoutdoor light level sensor.RS232 Interface (5WG1 148-1AB04: It allows the user toconfigure the panel on site via aDB9 serial cable. Configuration isdone with the software suppliedfree of charge with every order.11 LIGHTINGCONTROLSPower Supply (5WG1 123-1CB01): Input 120 V, 50/60 HZ.One per panel. It suppliesvoltage for communications andfor the inputs.Choke (5WG1 120-1AB01): It ismounted next to the powersupply. The choke prevents thepower-supply 5WG1 123-1CB01from short-circuiting the data onthe bus line. It picks up thepower from the two outerprinted conductors and feeds it via inductors to the two innerprinted conductors.Four Control Channels TimeClock (5WG1 372-5EY01): It hasfour control channels; eachchannel can be seen by thesystem as an input. This devicecan be programmed with up to322 different schedules,automatic day light saving time and 10 years battery back up.IP Interface (5WG1 148-1AB21):It allows connection to the user’sLAN for control and monitoring ofthe system. Optional ComBridgeStudio software is required for LANconnectivity. It can be configured forfixed IP address and also for DHCP.Outdoor Ambient Light Sensor(5WG1 P254-3EY01): Used tocontrol outdoor lights such asparking lot, signs, drive throughwindow. Three light levelthresholds (100 Fc, 50 Fc and 20Fc) are pre-programmed into thedevice. This is also a temperature sensor. Outsidetemperature can be read when the optional ComBridge StudioLAN software is used.Motion Sensor (5WG1 255-2AB11): Detects motion tocommand light to turn ON. Eachmotion sensor require buscoupling unit 5WG1 114-2CB02.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 11-5

11LIGHTINGCONTROLSLighting ControlsAccessoriesKey Switch (5WG1 220-2CB02):It is a block of 4 digital inputs. Itcan take inputs from a set of drycontacts (maintained ormomentary). It requires novoltage from the power supply.One UP220 device is supportedby each set of 10 panels. This device is intended to be usedfor after hours override purposes (i.e. cleaning crews).Touch panel (5WG1 588-2CB11):It allows remote control of thelights. It also provides relaystatus, indication of outside lightlevel and temperature. Eachpanel in the system can have adedicated touch panel.SelectionLAN software (ComBridge Studio): It allows connectivity to theuser’s LAN for control and monitoring of the lighting controlsystem. It has options for the following applications:▪ Additional licenses to allow more than one person tocontrol the lights (access is password protected withlevels of access authority)▪ OPC interface: For communications with buildingautomation systems (BAS)▪ E-mail services: can be programmed to send e-mail whena pre-selected event occurs▪ Database Services: Stores pre-selected events on adatabase for further viewing and analysis▪ Visual editor: Allows a graphical interface with the lightingcontrol systemReplacement partsTo order replacement parts simply refer to the number on adevice label (for devices installed in the enclosure, this numberlabel is also on the inner door. This number starts with thepanel letter designation followed by a number (i.e. A-101).From this number, SIEMENS knows exactly what you need.11-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Lighting ControlsWeb Visualization with ComBridge StudioOPCServiceOPCEngineWebTabServiceWebAccessEngineVisual Directore-MailServiceDatabaseServiceAutomation EngineSchedulingServiceVisualEditorInfoPointConfiguratorConfigurationManagerOverviewVisual Director is a complete Web visualization tool with userinterface, its own navigation structure with EIB display andcontrol elements that can be freely positioned.The OPC service links EIB elements with OPC client systems.Automation Services execute automation functions directly fromthe ComBridge Studio Server PC: schedule jobs, e-mails anddatabase entries for the purpose of data analysis and reporting.11 LIGHTINGCONTROLSApplicationsGet and configure only the functions that you really need toestablish a simple, easy to operate interface. The graphicalinterface is ideal for use by non-technical personnel. It is alsoused to create links to other building automation functionsand systems.Webtab ServicesCore ServicesCore and Webtab Services link the EIB system to the networkand enable fast tabular visualization.ToolsIP Router, users and functional expansions can be added atany time. This offers considerable cost benefits. Thesefunctions can be divided into four groups:▪ Webtab Services▪ Automation Services▪ OPC Services▪ VisualizationAutomation ServicesThis package provides all the functions to control and monitor anLCP3000EZ Lighting Control System.It contains Webtabs, which support linking to the visualization ofthe lighting control data points in the shortest time possible.The following tools are part of the Core and Webtab Services:▪ ComBridge Configuration Manager: User interface formanagement of the IP router, TCP engines and softwarelicenses▪ ComBridge InfoPoint Configurator: Easy-to-use tool for thecreation of Webtabs, OPC data point lists, email services,time jobs and database entries.▪ Web-based user control:Control of the installation, ComBridge Studio AutomationServices deliver application services at the supervisory level.Schedules:Daily programs can be stored and managed centrally using theScheduling Service. Simply checkmark the week days on whichyou need to activate. Switching and control commands can beexecuted according to the schedule.Emails:Critical conditions or events can be monitored so that in event oftheir occurrence, emails are delivered. The contents of emailscan be custom designed, and even sent with an attachment, e.g.with photos or circuit diagrams. This capability enables an easyto visualize system that can expedite Trouble Diagnosis & Repair.Data recording:Using the Database Services, you can write selected events toa database for daily, weekly or monthly scheduled evaluationand reporting.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 11-7

11Lighting ControlsWeb Visualization with ComBridge StudioOPC ServicesVisual DirectorOverviewLIGHTINGCONTROLSComBridge Studio offers full OPC server functionality enablingSIEMENS lighting controls integration with other buildingautomation systems (BAS).Double Advantage:ComBridge Studio OPC Services can also be used at the sametime as other ComBridge Studio applications.For example, the facility can be controlled by OPC at the sametime as the workplace is controlled using Webtab or a VisualDirector application. It is also possible to ensure access to thesystem installations for service personnel, or setup an emailmessage services.Quantity Control:Not all data is of interest to the OPC client system.Exchanging all data with the system can lead to huge volumesof information that clogs up the system. In the InfoPointConfigurator you can restrict lists to the required informationonly.ComBridge Studio Visual Director is supplementary to Webtaband offers a wide range of design options such as definablenavigation, layout of the graphical display and controlelements.Web Standards:Visual Director is HTML-based. Web assets, such as,navigation, graphics, dynamic HTML, layouts, scripts anddynamic contents in visualization projects can be usedrepeatedly. Furthermore, HTML know-how is now prevalent inthe market and easily available.User Login:Visual Director provides complete system definition,application and use. Each user can be assigned their ownstart page and navigation allowing for individual system oroperational “views” depending upon operator or monitoraccess level, engineering, maintenance or security function.The user level lets you control the data points each user canaccess.Visual Editor:Visual Director contains a menu-assisted, pixel-graphic HTMLeditor with a multitude of functions for creating your Web userinterface.11-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Lighting Controls5WG1 261-1CB01 Binary Input DeviceWiring Diagrams11 LIGHTINGCONTROLSFigure 2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 11-9

11LIGHTINGCONTROLSLighting Controls5WG1 512-1CB01 Load Relays DeviceCommunications ConnectorWiring Diagrams3.54" (90 mm)5.67" (144 mm)FromBreakerThis type connection allows onebreaker to feed more than one relayFigure 311-10Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Lighting ControlsGeneralOther Applications:If the LCP3000EZ does not meet your needs SIEMENS can help with your lighting control requirements beyond the capabilitiesof the LCP3000EZ.SIEMENS has the equipment and technology to do complex installations which require dimming for energy savings. If yourequire day light harvesting for additional energy savings, SIEMENS is your source.For fluorescent dimming, SIEMENS uses DALI (Digital Addressable Lighting Interface). This is state of the art technology, whichuses individually addressable DALI ballasts.This technology allows you to change lighting zones via software without the need of re-wiring the system. It also allows you tomonitor ballast and lamp failure, as well as the light output (relay).Contact your nearest SIEMENS Energy and Automation Sales Office for additional information.11 LIGHTINGCONTROLSFigure 4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 11-11

NotesLIGHTINGCONTROLS1111-12Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

12SPEEDFAX TM 2007-2008 SwitchboardsContentsFront Connected SwitchboardsType SB1, SB2, and SB3 12-2Type IPS 12-3 – 12-6General Layout Information 12-7 – 12-12Rear Connected SwitchboardsType RCS 12-13Multi-Metering SwitchboardsType MMS 12-14Type SMM 12-15 – 12-17Super Blue Pennant Switchboards 12-18 – 12-23Service Entrance SwitchboardsType BCT 12-24Type SCT 12-25Switchboard Replacement and Modifications Kits 12-2612 SWITCHBOARDSResidential Commercial Industrial

12SWITCHBOARDSFront Connected SwitchboardsType SB1, SB2 and SB3Maximum FlexibilityWhether the design is for a 240V ac,400 ampere system; a 600V ac, 6000ampere system; or something inbetween, Siemens front connectedswitchboards should be considered.Every aspect of the equipment designhas been targeted at improving layoutconvenience, reducing installationcosts, and minimizing the impactand cost of system changes. Theseswitchboards provide the ruggedconstruction and service reliabilityrequired for industrial plants, hi-risecomplexes, hospitals, and commercialbuildings, and are built to UL 891 andNEMA PB-2 standards.GeneralType SB1 For LimitedSpace ApplicationsThe Siemens type SB1 switchboardhas been specifically designed forthose applications where floor spaceis at a premium. The SB1 containsfront-connected protective devicesand bus ratings up to 2000 amperesat 600V ac. The rear of all sectionsalign as standard.Type SB2 For Increased ServiceAnd More Load Cable RoomSiemens SB2 switchboards can haveextra depth behind the vertical bus ineach distribution section, and containsprotective devices and bus rated up to4000 amperes at 600V ac. The rear ofall sections align as a standard. Frontand rear alignment is available as anoption.Type SB3 For Custom OptionsThe SB3 switchboard is available withprotective devices and bus up to 6000amperes at 600V ac. Options include,but are not limited to, incoming andoutgoing busway, ACCESScommunication, protective relaying,autothrowover schemes andtransformer connections.Siemens SB SwitchboardsAvailable Features SB1 SB2 SB3Maximum Bus Rating 2000A 4000A 6000AMain Devices MCCB, VB, HCP, BPS MCCB, VB, HCP, BPS, WL (Fixed) MCCB, VB, HCP, BPS, WLFeeder Devices MCCB, VB, HCP, BPS MCCB, VB, HCP, BPS, WL, (Fixed) MCCB, VB, HCP, BPS, WLSolid State MCCB No 100,000 AIC 200,000 AICCustomer Metering Yes Yes YesUtility Metering Yes Yes YesDensity Rated Bussing No Yes YesAccessible Front Front Front (up to 38" deep)Front/Rear (Above 38" deep)Alignment Rear Rear STD; Rear/Front Optional Rear STD; Rear/Front OptionalFor additional information on this product visit our website at www.sea.siemens.com.For application pricing information contact your local distributor or the closest Siemens sales office.12-2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Integrated Power Systems SwitchboardsType IPSThe modular design of the Siemens lPSswitchboard allows the user to integrateelectrical distribution equipment, powermonitoring and environmental controlsthat typically mount in multipleenclosures into one switchboard line-up.Users have the freedom to configure anarrangement that best fits their individualneeds. Optional factory installedinterconnection wiring is available tofurther reduce installation time.lPS Equipment Benefits include:▪ Less product to handle and install▪ Lower total installation cost▪ Less time on the jobsite▪ Less floor space used for electricalequipment▪ Single source equipment supplier▪ Simplified field setup and programminglPS switchboards are built to UL 891 andNEMA PB-2 standards. Standard heightof lPS sections is 90 inches. Optionalheight of 70 inches is available. Minimumdepth of lPS switchboards is 13.75inches. Optional depths of 20, 28 and 38inches are available. Some componentsdictate the use of optional depths.Numerous components are availableto fit customer's individual needs.▪ Lighting Panelboards (MLO and MainDevice)▪ Power Monitoring▪ Distribution Transformers▪ ACCESS Communication▪ Lighting Contactors▪ Lighting Control▪ HVAC Control▪ Building Management▪ PLC▪ Automatic Transfer Switch▪ Motor Starter Units▪ Backup GeneratorsTypical lPS switchboards consist ofone service section and one or moredistribution sections that are cableconnected.However, lPS switchboards are alsoavailable with through bus and pullsections. lPS switchboards willGeneralaccommodate systems up to 4000amperes. 600V ac maximum in 1-phase3-wire, 3-phase 3-wire, or 3-phase 4-wireconfigurations.All components can be built intostandard NEMA Type 1 indoorenclosures, or optional NEMA Type 3Routdoor construction.Bus bars are available in standardtin-finished aluminum or optionalsilver-finished copper. Standard bus issized on the basis of heat rise criteria, inaccordance with UL 891. All bus bars aresized to limit heat rise to 65ºC above amaximum ambient temperature of 40ºC.As an option, conductor material can besized according to density limits, basedon bus material. The applicable limits are:Copper — 1000 amperes sq. in.Aluminum — 750 amperes sq. in.Screw type mechanical connectors (lugs)are provided as standard equipment onall devices. However, compressionconnectors are available as an option.12 SWITCHBOARDSService SectionDistribution Sections•• ••••••••••••• • • Main Breaker or Switchup to 4000 Amp• MLO to 2000 Amp Transient VoltageSurge Suppressor Digital Meter Local Display Unit(ACCESS TM Communication)• Feeder Breakers (up up 4000 Amp)• Feeder Switches (up up 4000 Amp)• Motor Starter Modules(up to NEMA Size 4)• Lighting Contactors (30 to 225 Amp)• PLC• Time Clock Lighting Panelboards Distribution Transformer Lighting Control Lighting Contactors, PLC, Time Clocks,ATS, Telephone Cabinets HVAC Control Customer Supplied ComponentsFor additional information on this product visit our website at www.sea.siemens.com.For application pricing information contact your local distributor or the closest Siemens sales office.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 12-3

Integrated Power Systems Switchboard (Type IPS)Individually Mounted Devices3.00(76.2)3.00(76.2)2.50 (63.5)12DCONDUIT AREATOP & BOTTOMSWITCHBOARDSW2.50 (63.5)5.00(127)2.50 (63.5)90.00(2286)UnitSpace75.00(1905)5.00(127)2.50 (63.5)Dimensions shown in inches and millimeters ( ).12-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Integrated Power Systems Switchboard (Type IPS)Individually Mounted Devices37.50 (953)Unit Space For ComponentsComponentDimensions in inches (mm)Required Minimum MinimumUnit Space Section Width (W) Section Depth (D)P3 Panels 25.00 (635)P1, P2 PanelsTime Clock (Up to 6 in 20" and 25" wide, 37.50 (953) 20.00 (508) 13.75 (349)9 in 32" wide)LCP Lighting Control Panel 25.00 (635)Distribution Transformer (15 KVA)37.50 (953) 20.00 (508)Distribution Transformer (30 - 45 KVA) 25.00 (635)20.00 (508)Distribution Transformer (75 - 112.5 KVA) 37.50 (953) 32.00 (813)Distribution Transformer (150 KVA)28.00 (711)38.00 (965)Distribution Transformer (225 KVA) 75.00 (1905)Distribution Transformer (300 KVA) 46.00 (1168) 38.00 (965)Lighting Contactor(Up to 4 in 20" and 25" wide,30 through 225 Amp 6 in 32" wide)PLC (LOGO!) (Up to 6 in 20" and 25" wide,20.00 (508) 13.75 (349)ASCO 920 or Siemens CLH 9 in 32" wide)PLC (S7–200) (Up to 4 in 20" and 25" wide,6 in 32" wide)Automatic Transfer Switch(up to 400 Amp) 75.00 (1905)32.00 (813) 20.00 (508)400-1200 Amp MCCB1600-2000 Amp MCCB 37.50 (953)800-2000 Amp ICCB (WL Breaker)28.00 (711)2500-4000 Amp ICCB (WL Breaker) 75.00 (1905) 38.00 (965)800-1200 Amp BPS 37.50 (953)1600-2000 Amp BPS38.00 (965)75.00 (1905)2500-4000 Amp BPS 46.00 (1168)12 SWITCHBOARDSNOTE: For required unit space relative to HVAC control and custom specified components, contact Siemens sales. These components can be mixed in a 37.5" (953mm) high compartment. 37.50" (half section) for panels that would fit in to panel cans 44". 20.00" for P1/P2 panel (note may be mounted 2 across in >=38" wide sections).25" for P3 panels (note may be mounted 2 across in >=46" wide sections). Distribution transformer minimum size requirements are based on 150 degree rise TP1rated units - aluminum or copper bus. Consult Siemens for size requirements related to otherratings including K-Rated. Outdoor sections with transformers must also have rear dooradded to that section for ventilation. Stacked transformers in a section are limited to 45KVAat this time. Contact Siemens for updated information. For CLH contactor only, up to 6 in 20"and 25" wide section can be mountedand 9 in a 32" wide section. ATS includes generator controls. Contact Siemens sales for details. Emergency power generators are available. Contact Siemens sales for details.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 12-5

Integrated Power Systems SwitchboardTypical IPS LineupSWITCHBOARDS1228.00(711)250 AMLOP1LPD250 AMBP1LP1250 AMLOP1LP213.75(349)250 AMLOP1LP3800 A MLODP1 480Y/277 Vac75 KVAXFMRD32.00(813)38.00(965)20.00(508)Dimensions shown in inches and millimeters ( ).12-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

General Layout Information (Type SB1, SB2, SB3, IPS)Individually Mounted Service MainsDimensions in Inches (mm)Height WidthPull SectionNon- BussedMax.Bussed UG Amp. DeviceRating Type H1 W1 W2 W3Molded Case Circuit BreakersHJXD6, HHJD6,400 HHJXD6, JXD2, 14.00JXD6, JD6, HJD6, (356)SJD6, SHJD6 32.00HLXD6, HHLD6, (813)600HHLXD6, LXD6, 20.00LD6, HLD6, (508)SLD6, SHLD6MXD6, MD6, HMD6,LMXD6, LMD6,20.00 20.00 800 HLMD6, HLMXD6, (508) (508)SMD6, SHMD6, 90.00NM, HM, LM (2286)NXD6, ND6, HND6,1000 SND6, SHND6,HNXD6, NN, HN, LN 38.00 32.001200NXD6, ND6, HND6, (965) (813)SND6, SHND6,HNXD6, NN, HN, LN16002000PXD6, PD6, HPD6,SPD6, HPXD6,NP, HP, LP 32.00 28.00 RXD6, RD6, (813) (711)HRXD6, HRD6Insulated Case Circuit Breakers — Stationary MountedMinimumRequiredDepth800 20.001200 32.00 (508)Type WL28.00 1600Insulated(813) (711)90.00 38.002000 Case(2286) (965)32.002500 Breaker38.00 (813) 38.03000(965) (965)4000Switches400 14.00 (356)60020.00 (508) 20.00HCP800 (508)1200800 20.001000 Vacu-Break 38.00 (508)1200 (965) 32.0090.00800(813) 28.00(2286)1000(711)12001600 Bolted2000 Pressure2500 32.0046.00 38.00 (813)300038.00(1168) (965) (965)4000H1Top Entrance Cables Pull BoxH1H1W2W39300MeterMainW1Bottom Entrance withNon-Bussed Pull Section9300MeterMainW1Bottom Entrance withBussed Pull Section9300MeterMainW1Bottom Entrance9300MeterDDD12 SWITCHBOARDS For EUSERC UGPS dimensions, refer to Siemens Front Connected Switchboard Selection & Application Guide. Optional depths are 28 and 38 inches. Optional depth is 38 inches.H1MainDW1Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 12-7

General Layout Information (Type SB1, SB2, SB3, IPS)Main Lug Only — 400A through 2000AAvailable branch circuit unit space variesdepending on amperage of incomingservice, lug type and if through bus isrequired. If more unit space is requiredthan is shown in the table below, one ormore panel mount device distributionsections must be added.12SWITCHBOARDSKKLCond. AreaTop / BottomM.L.O.LKKLCond. AreaTop / BottomLHUnitSpaceHUnitSpaceM.L.O.DDW W Top EntranceBottom EntranceMain Lug Only Unit SpaceDimensions in inches (mm)SuitableFor UseUnit Space Only AsLugsMax. Service Av Max.Ampere Equipment AIC Height Standard Alternate Compression Width Minimum Conduit AreaRating Rating (H) 500 kcmil 750 kcmil 600 kcmil Max. (W) Depth (D) K L62.50 60.00400(1588) (1524)55.0060.00 56.25 (1397)600(1524) (1429)32 or 38(8.13 orAvailable80058.75 52.5090.00965)as a user(1492) (1334)200,000 (2286)53.75 13.75 2.50 3.00selectable57.50 50.00 (1365) (349) (64) (76)1200 option(1461) (1270)1600200045.00 38.75 45.00 38.00(1143) (984) (1143) (965) 46 in. (1168) width available as an option. See page 12-12 for unit space requirements for disconnect devices. Optional 70" high is also available. Unit space is reduced by 20". If load through bus is required, the available unit space is reduced by 7.50 inches for 400-1200 amp MLO sections. Maximum of 6 disconnect devices only. SUSE service disconnects 1000A or higher on solidly grounded wye systems of more than 150V to ground require ground fault protection. Ground fault uses 10 in.(254 mm) of unit space. See NEC 230-95 for additional details. This applies to branch devices 1000A or larger on non-service equipment unless ground fault protectionis provided upstream at the service. See NEC 240-13 for further information. Optional section depths are 20", 28" and 38."12-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

General Layout Information (Type SB1, SB2, SB3, IPS)Panel Mounted MCCB — 400A through 1200AIPS service sections can house botha main service disconnect device andbranch disconnects. Switchboardscan be furnished with “Suitable forUse Only as Service Equipment”labels, but include no provisions forutility metering.Branch circuit device unit space varies,depending on the rating and consequentphysical size of the main disconnectdevice. If more unit space is requiredthan is shown in the tables below, oneor more additional panel mounted devicedistribution sections must be added.KK400-1200A Main Breaker Without GFPLConduit AreaTop or BottomL400 -1200A Main Breaker With GFPKKLConduit AreaTop or BottomL12 SWITCHBOARDSM C BUnitSpaceHUnitSpaceHM/BGFWDWDFig. 1 Top Entrance (Invert for bottom entrance)Fig. 2 Bottom Entrance (Invert for top entrance)Main Breaker with or without Ground Fault ProtectionDimensions in inches (mm)Max. Conduit Area ServiceAmpere Breaker Height Unit Space Width Minimum Main EntranceRating Type (H) (W) Depth (D) K L Location LabelJXD2, JXD6, JD6,400HJD6, HJXD6,HHJD6, HHJXD6,SJD6, SHJD656.25 (1429)LXD6, LD6, HLD6,HLXD6, HHLD6,600HHLXD6, SLD6,32.00 (813)SHLD6LMD6, LMXD6,90.00 13.75 2.50 3.00 Top orHLMD6, HLMXD6,(2286)53.75 (1365)(349) (64) (76) BottomNM, HM, LM800 MXD6, MD6,HMD6, HMXD652.50 (1334)SMD6, SHMD6 40.00 (1016)NXD6, ND6,1000 HND6, HNXD6, 52.50 (1334)NN, HN, LN38.00 (965) SND6, SHND6 40.00 (1016)NXD6, ND6,1200 HND6, HNXD6,52.50 (1334)NN, HN, LNSND6, SHND6 40.00 (1016)YesYes Ground fault, if applied, uses 10 in. (254 mm) of unit space. See page 12-12 for unit space requirements for disconnect devices. Available unit space for 400 and 600 amp main breaker sections is reduced to53.75 if load side through bus is required. Optional section depths are 20", 28" and 38". Optional 70" high is also available. Unit space is reduced by 20". 46 in. (1168 mm) wide if 750 kcmil or compression lugs required.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 12-9

General Layout Information (Type SB1, SB2, SB3, IPS)Panel Mounted HCP Switch Main — 400A through 1200AKK400 -1200A HCPLLConduit AreaTop or Bottom12SWITCHBOARDSH400-1200AHCPMain SwitchUnitSpaceW DTopFeedBottomFeedTop Entrance (Invert for Bottom Entrance)400 — 1200A HCP Switch MainDimensions in inches (mm)Max.ServiceAmpere Height Unit Width Minimum Conduit Area Main EntranceRating (H) Space (W) Depth (D) K L Location Label400 Top600 90.00 46.25 38.00 13.75 2.50 3.00 or Yes800 (2286) (1175) (965) (349) (64) (76) Bottom1200 46 in. (1168 mm) width available as an option. See page 12-12 for unit space requirements for disconnect devices. Optional section depths are 20", 28" and 38". Optional 70" high is also available. Unit space is reduced by 20".12-10Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

General Layout Information (Type SB1, SB2, SB3, IPS)Panel Mounted Devices Through-Bus FedThrough-Bus Fed Distribution SectionsLLKKConduit AreaTop or BottomThroughBusBusBarH1H2UnitSpace➀12 SWITCHBOARDSDWThrough-Bus Fed DimensionsDimensions in Inches (mm)HeightWidthWithMaximum Maximum Unit MinimumConduit AreaRiser Through-Bus Space Section DepthAmperage Amperage H1 H2 W (D) K L20002000 2500 & 3000 65.00 (1651)4000 90.00 (2286)3000 4000 62.50 (1588)32.00 or 38.00 (813) (965)38.00 or 46.00(965) (1168)20.00 (508) 2.50 (64) 3.00 (76) See page 12-12 for unit space requirements for disconnect devices. Optional 70" high is available. Unit space is reduced by 20. Optional section depths are 28" and 38". 46 inches (118 mm) width optional.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 12-11

12SWITCHBOARDSGeneral Layout Information (Type SB1, SB2, SB3, IPS)Unit Space for Panel Mount Disconnect and Miscellaneos ComponentsUnit Space Requirements — Molded Case Circuit Breakers (Mains and Branches)Dimensions in inches (mm)Max. Total Poles Unit Space Required EnclosureAmpere Device Available Twin Single MinimumRating Type 1P 2P 3P Mounted Mounted Width100BL, BLH, HBL, BQD, NGB, NEB, HEB26ED4, HHED6 2 3.75 (95)ED4, ED6, HED4, HHED6,NGB, NEB, HEBHED4, HHED6, ED4, NGB,6.25 (159)125 ED6 with accessories2CED6 3.75 (95) — 32.00 (813)2CED6 with accessories6.25 (159)225 QJ2, QJH2, QJ2-H,HQJ2-HFXD6, FD6, HFD6, HFXD6, 5.00 (127)250 HHFD6, HHFXD6CFD6 — 1 — 5.00 (127)JX2, JXD6, JD6, HJD61 1 — 8.75 (222)—400 HJXD6, HHJD6, HHJXD6 2 2 8.75 (222) — 38.00 (965)SJD6, SHJD6 —LXD6, LD6, HLD6, HLXD6,1600 HHLD6, HHLXD6 8.75 (222) 32.00 (813)SLD6, SHLD6 —LMD6, LMXD6, HLMD6, HLMXD6 1 1 —MXD6, MD6, HMD6, HMXD680010.00 (254) 38.00 (965) SMD6, SHMD6NM, HM, LM—8.75 (222) 38.00 (965)1200NXD6, ND6, HND6, HNXD6 1SND6, SHND6, NN, HN, LN —10.00 (254) 38.00 (965) Unit Space Requirements — Fusible Switches (Mains and Branches)Dimensions in inches (mm)Max Unit Space Required EnclosureAmp Switch 240V 600V MinimumRating Type Twin Single Twin Single Width30-30 2.50 (64) —30-3030-60 5.00 (127)60-60 — 7.50 (191) —32.00 (813)60-1007.50 (191)100-100 Vacu-Break200-200 10.00 (254) 10.00 (254) 100 7.50 (191) — 7.50 (191)200 10.00 (254) — 10.00 (254)400 —15.00 (381)600—15.00 (381) 38.00 (965)400 - 1200 HCP 16.25 (413) 16.25 (413) 46 in. (1168mm) wide if 750 kcmil or compression lugs required. The 2.5 in. (64) high unit is suitable for NEC Class H, K1 and K5 fuses only. Class R rejection type fuse holdersare not available. Unit rated 600V, factory configured to accept 250V Class K or R fuses. Field convertible to accept Class J fuses. Factory configure to accept Class J fuses only.Unit Space Requirements ForMiscellaneous ComponentsComponentUnit Spacein inches (mm)Local DisplayADR 9000 (SRTU)10.00 (254)Transient Voltage Surge 10.00 (254)Suppressor (TPS)9200A Digital Meter 10.00 (254)9200B Digital Meter 10.00 (254)9200C Digital Meter 10.00 (254)9300 Digital Meter 10.00 (254)9330 Digital Meter 10.00 (254)9350 Digital Meter 10.00 (254)Lighting Contactor30 to 225 Amp 10.00 (254)Siemens CLHLighting Contactor30 to 225 Amp ASCO 920 20.00 (508)Time ClockSangamo, Tork or Paragon 10.00 (254)PLC (LOGO! TM and S7) 10.00 (254)12-12Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Rear Connected SwitchboardsType RCSSiemens RCS switchboards differ fromthe front connected (Type SB1, SB2,SB3) design primarily in the distributionsections. In the distribution section thebranch feeders are individually mounted.Because of this method of mounting,access to the outgoing cable terminalsmust be from the rear of the unit. Busbar extensions from the feeder devicesare run to the rear of the RCS sectionstopping before the conduit area foreasy access and cable connection.An optional cable management systemcan be requested to secure the outgoingcables. The front and rear of all sectionsalign and are designed for mountingaway from the wall. RCS switchboardwill accommodate requirements up to6000 ampere and 600 volts. The mainbus can be specified for 400 to 6000ampere rating. Main, tie and branchdevices are available in amperage ratingsup to 6000 amps. RCS switchboards canbe indoor (NEMA 1) or outdoor (NEMA3R) construction.GeneralRCS switch boards utilize Type WLinsulated case and/or low voltage powercircuit breakers with drawout mountings.Features and benefits include highbreaker density, 100kA standard shortcircuit bus bracing and three levels ofhorizontal bus. Options include insulated/isolated bus, Dynamic Arc Flash Sentry,ModBus Communication and intelligentpower monitoring.12 SWITCHBOARDSWL Insulated Case WL LV PowerSwitchboard Circuit Breaker Circuit BreakerType RCS Mounting Drawout Mount Drawout MountMain Devices Individual 400-5000A 400-5000ABranch Devices Individual 400-5000A 400-5000AFor additional information on this product visit our website at www.sea.siemens.com.For application pricing information contact your local distributor or the closest Siemens sales office.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 12-13

12SWITCHBOARDSMulti-Metering SwitchboardsType MMSIn today’s commercial and industrialenvironments, the electrical meteringrequirements vary according to thespecification of the development site.Siemens offers a solution with highquality multi-metering switchboardsthat meet the non-EUSERC arearequirements. The MMS switchboardmeets the requirements of memberutilities and municipalities with thesedependable commercial switchboards.Features▪ Up to 4000A main service208Y/120V, three phase/four wire480Y/277V, 3-phase 4-wire▪ 100A, 200A and 320A tenant mainsare available▪ UL listed and labeled▪ NEMA “Non-EUSERC” Design▪ Hot sequence metering is standard;cold sequence also available▪ 50,000A symmetrical bus bracing isstandard; above 50,000A available uponrequest.▪ All meter sockets are pre-wired for100A, 200A or 320A devices▪ Copper or Aluminum bus available▪ Units are front accessible.▪ NEMA Type 1 and Type 3R constructionavailable▪ Available with optional cable pullsections▪ Sockets include lever type manualby-pass▪ Load cable exit top or bottom▪ Common depth for main and meteringsections upon request▪ Ring-less type meter cover designGeneralFor additional information on this product visit our website at www.sea.siemens.com.For application pricing information contact your local distributor or the closest Siemens sales office.12-14Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Multi-Metering SwitchboardsType SMMCompletely engineered and assembled,Siemens SMM commercial meteringswitchboards require minimal fieldassembly. They are UL listed and labeledand meet all EUSERC standards. SMMswitchboards are built to meet therugged requirements of the westernUnited States. These units can bemodified to meet any additionalrequirements of member utilities andmunicipalities. For a high qualitydependable commercial meteringswitchboard consider the West CoastSMM design.Features▪ Up to 4000A main service120/240V 1-phase 3-wire240/120V 3-phase 4-wire208Y/120V 3-phase 4-wire480Y/277V 3-phase 4-wire▪ 200 amp continuous duty metersockets▪ Meets EUSERC requirements▪ UL listed and labeled▪ Hot sequence metering standard -cold sequence metering optional▪ Test blocks are standard▪ Copper or Aluminum bus▪ 65,000A Sym bracing standard(higher bracing rating available ifrequired)▪ Type NEMA Type 1 and Type 3Rconstruction available▪ Meets UL891 and NEMA PB2standards▪ Rear cable barriers available for topload cable exist▪ Ring type meter cover designGeneral12 SWITCHBOARDSFor additional information on this product visit our website at www.sea.siemens.com.For application pricing information contact your local distributor or the closest Siemens sales office.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 12-15

Multi-Metering SwitchboardsType SMMGeneralFigure A Figure B Figure C Figure D SWITCHBOARDS1220" 32" 20" 32" 26"SMM/SMD Sections with Space for Tenant Mains/Meter SocketsTable 7.4.6.19 SMM Sections With Space For CB Mains And Sockets Sockets Figure3 A6 BTable 7.4.6.20 SMD Sections With Space For CB Mains And Sockets 3 A6 BTable 7.4.6.21 SMM Sections With Space For T-Fuse Mains And Sockets 3 A6 BTable 7.4.6.22 SMD Sections With Space For T-Fuse Mains and Sockets 3 A6 BTable 7.4.6.23 SMM Sections With Space For VB Mains And Sockets 2 C6 D2 C6 DTable 7.4.6.24 SMD Sections With Space For VB Mains And Sockets 2 C6 D2 C6 DNOTE: Component priced Meterboards allow for any combination of 100 and 200 ampere tenantmains or blank positions. Select the base structure, meter sockets and tenant mains accordingly.SMM sections–Cross bus from 800–2500 ampere.Sections 20" deep.Price sockets with tenant mains from Table 7.4.6.25,7.4.6.26, 7.4.6.27. Price sockets only from Table 7.4.6.28.Cross bus is not included. Price from Table 7.4.6.29or 7.4.6.30.When load cables exit top of section, rear load barrier(RLB) must be priced. See Table 7.4.6.31.SMD sections required for cross bus exceeding2500 ampere. Sections 28" deep.Fuses not included. For Class J fuse provisions, changeR to J.26" wide for Outdoor Type 3R.38" wide for Outdoor Type 3R.35" wide for Outdoor Type 3R.12-16Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Multi-Metering SwitchboardsType SMMComponentsTable 7.4.6.25 — Tenant Circuit Breaker With Meter Socket 240 VoltNo.Ampere Breaker ofOption Rating Type Poles I.C.100 BQ 2 110,0003 110,000100 BQH 2 122,0003 122,000100 HBQ 2 165,00001 3 165,000200 QJ2 2 110,0003 110,000200 QJH2 2 122,0003 122,000200 QJ2-H 2 142,0003 142,000100 ED4 2 165,0003 165,000100 NGG 2 165,0003 165,000100 HED4 2 100,000023 100,000100 HEG 2 100,0003 100,000200 FD6 2 165,0003 165,000200 HFD6 2 100,0003 100,000480 Volt100 ED4 2 118,0003 118,000100 NGG 2 125,0003 125,000100 HED4 2 142,0003 142,000100 HHED6 2 165,00003 3 165,000100 HEG 2 165,0003 165,000200 FD6 2 135,0003 135,000200 HFD6 2 165,0003 165,000200 HFD6 2 165,0003 165,000General12 SWITCHBOARDSOrder 100A and 200A tenant circuit breakers fromthe same option only. Do not mix breakers fromdifferent options.Meter socket with Test Block included. For socket only,without tenant disconnect, price from Table 7.4.6.28.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 12-17

12SWITCHBOARDSSuper Blue Pennant SwitchboardsWarehouse StockAmpere Ratings400–600–800 Ampere CircuitBreaker Main400–600 Ampere FusibleVacu-Break MainVoltage Ratings120/240 Volts 1-Phase, 3-Wire240/120 Volts 3-Phase, 4-Wire Delta240 Volts 3-Phase, 3-Wire Delta208Y/120 Volts 3-Phase, 4-Wire480Y/277 Volts 3-Phase, 4-Wire480 Volts 3-Phase, 3-Wire DeltaI.C. RatingsThe short circuit current rating islimited to the lowest currentinterrupting rating, at the supplyvoltage, of any device installed. OnlySiemens breakers with short circuitinterrupting ratings equal to or greaterthan the marked short circuit currentrating shall be used for replacementor additions.FeaturesGeneralThe Super Blue Pennant service entranceswitchboard is designed to meet theneeds of main over current protectionwith distribution devices for mediumduty service applications. Main servicedisconnects can be either SiemensVacu-Break fusible switch or Siemensmolded case circuit breakers. Eithertype of device provides dependableperformance with series ratedcombinations available. The switchboard islabeled as “suitable for use only as serviceequipment”. Super Blue Pennantswitchboards meet EUSERC utilityrequirements.□A NEMA Type 1 indoor or Type 3Routdoor self-contained enclosures areconstructed of code gauge steel andpainted ANSI-61 light gray.□B Rating label information is clearly visibleon the equipment front panel. Danger,short circuit rating labels and UL listinglabel present necessary information toconform with NEMA Standard PB-2.□C Metering and test block provisionsmeet EUSERC utility specifications.□D Incoming main lugs are mechanicalscrew-type mounted on studsaccepting a wide range of cable sizes.□E Barriered hot sequence utility meteringand fully bussed power companycurrent transformer compartment meetEUSERC utility standards.□F Service disconnect can be fusibleVacu-Break switch through 200,000 AICor circuit breaker with maximum ratingof 65,000 AIC at 240 volts and 50,000AIC at 480 volts.□G Distribution panel kits are optional andfield addable with ratings of 400–800amperes. Up to 40 branch circuitprovisions available, 18 branch circuitminimum.▪ High interrupting capacity subfeed kitswith molded case circuit breaker ratingsof 225 or 400 amperes.▪ Series rated combinations are available.Consult sales office.▪ Contact sales office for warehousestocking locations.12-18Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Super Blue Pennant SwitchboardsType 1 — Indoor, Type 3R — OutdoorType 1 — IndoorType 3R — Outdoor WeatherproofDimensions( )( )12 SWITCHBOARDS()2.875"26.25"2.875"2.875"3.875" 5.875"3.875"14.5" 12.5"8.75" 14.5"2.875"15.625"Dimensions (inches)Description A B CWithout Lug Landing 46 14 12With Lug Landing 58 26 24Dimensions (inches)Description A B CWithout Lug Landing 53 15 13With Lug Landing 65 27 25For inches / millimeters conversion, see conversion tablein Application Data section.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 12-19

Super Blue Pennant SwitchboardsMain Circuit BreakerMain Circuit BreakerMain Device Meter Distribution ApproximateAmpere ServiceCatalog Number List Price $ Socket KitsWeight (lbs.)Rating Voltage Indoor Outdoor Indoor Outdoor Clips Available Indoor OutdoorSelection12SWITCHBOARDS400 AmpereLine Lugs(2)— 3 ⁄0-500kcmil (Copperor Aluminum)Breaker Rated65,000A IRSymmetricalat 240 Volts35,000A IRSymmetricalat 480 VoltsType JD6120/240; 1-Phase, PQ26303-WirePB224 WPB224 4005.00 7071.00 5 PQ2612240/120; 3-Phase,4-Wire Delta240; 3-Phase, PQ4630PB424 WPB424 5000.00 8008.00 153-WirePQ4612208Y/120; 3-Phase,4-Wire480Y/277; 3-Phase,4-Wire480; 3-Phase,3-WirePB444 WPB444 6856.00 9889.00 15PE4630PF4606320 1050335 1060335 1060600 AmpereLine Lugs(2)— 3 ⁄0-500kcmil (Copperor Aluminum)Breaker Rated65,000A IRSymmetricalat 240 Volts35,000A IRSymmetricalat 480 VoltsType LD6120/240; 1-Phase, PQ26303-Wire PB226 WPB226 5125.00 8151.00 5 PQ2612240/120; 3-Phase,4-Wire Delta240; 3-Phase,3-Wire PB426 WPB426 6981.00 10015.00 15208Y/120; 3-Phase,4-Wire480Y/277; 3-Phase,4-Wire480; 3-Phase,3-WirePB446 WPB446 10476.00 13542.00 15PQ4630PQ4612PE4630PF4606320 1050335 1060335 1060800 AmpereLine Lugs(3)— 3 ⁄0-500kcmil (Copperor Aluminum)Breaker Rated65,000A IRSymmetricalat 240 Volts50,000A IRSymmetricalat 480 VoltsType MD6120/240; 1-Phase, PQ28403-Wire PB228 WPB228 6612.00 9656.00 5 PQ2816240/120; 3-Phase,4-Wire Delta240; 3-Phase,3-Wire PB428 WPB428 9053.00 12104.00 15208Y/120; 3-Phase,4-Wire480Y/277; 3-Phase,4-Wire480; 3-Phase,3-WirePB448 WPB448 13909.00 16930.00 15PQ4840PQ4818PE4840PF4809460 1090475 1090475 1090For inches / millimeters conversion, see conversion tablein Application Data section.Price does not include load side lugs, Distribution Panelor Subfeed Kits.For 6-jaw requirements, order 6th clip kitfrom accessories.Refer to Distribution Panel Kits for list prices.= Warehouse Stock12-20Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule SWBD

Super Blue Pennant SwitchboardsMain Fusible SwitchMain Fusible Switch Main Device Meter Distribution ApproximateAmpere ServiceCatalog Number List Price $ Socket KitsWeight (Lbs)Rating Voltage Indoor Outdoor Indoor Outdoor Clips Available Indoor Outdoor120/240; 1-Phase, PQ2630PF224 WPF224 4697.00 7549.00 53-WirePQ2612365 1094400 AmpereLine Lugs(2)— 3 ⁄0-500kcmil (Copper375 1110or Aluminum)200,000 AICmaximum at600 Volts600 AmpereLine Lugs(2)— 3 ⁄0-500kcmil (Copperor Aluminum)200,000 AICmaximum at600 Volts240/120; 3-Phase,4-Wire Delta240; 3-Phase, PQ4630PF424 WPF424 5726.00 8721.00 153-WirePQ4612208Y/120; 3-Phase,4-Wire480Y/277; 3-Phase,4-WirePE4630480; 3-Phase,PF444 WPF444 6714.00 9498.00 15PF46063-Wire120/240; 1-Phase, PQ26303-WirePF226 WPF226 5761.00 8927.00 5 PQ2612240/120; 3-Phase,4-Wire Delta240; 3-Phase, PQ4630PF426 WPF426 7942.00 10936.00 153-WirePQ4612208Y/120; 3-Phase,4-Wire480Y/277; 3-Phase,4-WirePE4630480; 3-Phase,PF446 WPF446 10225.00 13024.00 15PF46063-Wire375 1110370 1100390 1110390 1120Selection12 SWITCHBOARDSFor inches / millimeters conversion, see conversion tablein Application Data section.Fuses not included.Price does not include load side lugs, Distribution Panelor Subfeed Kits.For 6-jaw requirements, order 6th clip kitfrom accessories.Refer to Distribution Panel Kits for list prices.= Warehouse StockDiscount Schedule SWBD Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 12-21

12Super Blue Pennant SwitchboardsComponentsMain Device (Circuit Breaker or Fusible Switch)Load Side Lugs — Discount Schedule SWBDAmpere Rating Description Catalog Number Wire Range List Price $400 For Fusible LKF4 (1)—3/0-750 kcmil (Cu or Al) 227.00600 Switch LKF6 (2)—3/0-500 kcmil (Cu or Al) 227.00400 For Circuit LKB4 (1)—600-750 kcmil (Cu or Al) 227.00600 Breaker LKB6 (2)—3/0-350 kcmil (Cu or Al) 227.00800 LKB8 (2)—600-750 kcmil (Cu or Al) 451.00SelectionSWITCHBOARDSDistribution Panel Kits — Discount Schedule SWBDAmpereNumber and Type of Breaker PolesCatalogRating Voltage QP or HQ ED4 QJ2 or QJH2 FXD6 Number List Price $ Weight120/240V; 1-Phase, 3-Wire30 — — — PQ263012 — 12 — PQ26121105.00 39400 240/120V; 3-Phase, 4-Wire Delta 30 — — — PQ4630and 240V; 3-Phase, 3-Wire 1373.00 42600 208Y/120V; 3-Phase, 4-Wire 12 — 12 — PQ4612480Y/277V; 3-Phase, 4-Wire — 30 — — PE4630 1163.00 42480V; 3-Phase, 3-Wire — 12 — 6 PF4606 1163.00 65120/240V; 1-Phase, 3-Wire40 — — — PQ284012 — 16 — PQ28161806.00 65240/120V; 3-Phase, 4-Wire Delta 40 — — — PQ4840800 240V; 3-Phase, 3-Wire 2283.00 70208Y/120V; 3-Phase, 4-Wire 12 — 18 — PQ4818480V; 3-Phase, 3-Wire— 40 — — PE4840 1806.00 65— 12 — 9 PF4809 2552.00 70Circuit Breaker Subfeed Kits: (Breakers Not Included) — Discount Schedule SWBDDescription Catalog Number List Price $For FXD6-225A 2 or 3-pole PSFFJ6 595.00For JXD6, JD6, HJD6 400A 2 or 3-pole PSFJL6 913.00For inches / millimeters conversion, see conversion tablein Application Data section. Price includes phase and neutral load lugs and neutrallink assembly. 2-pole FXD6 requires 3-pole space. Price includes branch neutral and disconnectlink assembly. 1-pole breakers must not be connectedto “B” phase. 1-pole breakers must not be connectedto “B” phase. 2-pole breakers must be rated 240V.FXD6 circuit breakers are limited to 225A maximum. Price from Molded Case Circuit Breaker section.= Warehouse Stock12-22Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule SWBD

Super Blue Pennant SwitchboardsAccessoriesSelectionDescription Catalog Number List Price $Underground Pull Section or Full Height Section For Load Wiring — Discount Schedule SWBD14.5" Deep 90" High14" Wide (12" opening) — indoor PUG14 1597.0015" Wide (12" opening) — outdoor WPUG14 3370.0026" Wide (24" opening) — indoor PUG26 1866.0027" Wide (24" opening) — outdoor WPUG26 3879.0010" Wide (load wiring) PLW10 853.00Lug Landing Kits — Discount Schedule SWBD (Requires Catalog Number PUG26 or WPUG26)400A 1-Phase, 3-Wire or 3-Phase, 4-Wire PLL44 814.00600A 1-Phase, 3-Wire or 3-Phase, 4-Wire PLL46 1221.00800A 1-Phase, 3-Wire or 3-Phase, 4-Wire PLL48 1435.00“R” Fuse Clip Adapter Kit (Set of 3) — Discount Schedule VBSS400A 250/600V SSRK35 137.00600A 250/600V SSRK36 137.0012 SWITCHBOARDS“J” Fuse Clip Adapter Kit (Set of 3) — Discount Schedule VBSS400A 250V W49814 330.00400A 600V W49816 395.00600A 240V W49813 459.00600A 600V W49815 330.00“T” Fuse Clip Adapter Kit (One Pole Kit) — Discount Schedule VBSS400A 240V TFAK52 102.00400A 600V TFAK55 151.00600A 240V TFAK62 120.00600A 600V TFAK65 174.00Optional Meter Sockets and Doors — Discount Schedule SWBDMeter Compartment Door (32" Wide x 15" High for “S” base socket withtest block cutout (order necessary meter base from items below) PSP32 510.00Meter Compartment Door (32" Wide x 30" High) for 2 “S” basemeters with mounting provisions for test block and printingdemand meter (order meter base from table below)Left Hand Hinge or Right Hand Hinge PSDP32 577.00Blank Meter Compartment Door (32" Wide x 15" High) PBP32 243.005 Clip Meter Socket with ring PMS5 260.006 Clip Meter Socket with ring PMS6 294.008 Clip Meter Socket with ring PMS8 317.0013 Clip Meter Socket with ring PMS13 577.0015 Clip Meter Socket with ring PMS15 612.00Filler Plates — Discount Schedule MCCBQP-HQP-QJ2-QJ2H-QJH2 QF3 2.80Handle Blocking and Padlock Devices — Discount Schedule MCCBBlocking (QP-HQP 1, 2 and 3-pole) QL1 8.30Blocking (QJ2, QJ2-H, QJH2) QJHS1 13.40Blocking (ED2, ED4, ED6) E2HBL 16.00Padlock (QP-HQP) QLD3 8.40Padlock (QJ2, QJ2-H, QJH2) HL9419 15.10Padlock (ED2, ED4, ED6) ED2HPL 16.00Equipment Ground Bus –– Discount Schedule SWBDPEGB42 101.00For inches / millimeters conversion, see conversion tablein Application Data section.A PUG26 or WPUG26 Underground pull section isrequired when using these lug landing kits.= Warehouse StockDiscount Schedule SWBD Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 12-23

Circuit Breaker, Fusible Application SwitchboardsCircuit Breaker — BCT Service CubicleService Entrance Equipment With Provisions For Metering Current TransformersService Entrance Circuit BreakerSelectionCOLD SEQUENCE METERING STANDARDFor Hot Sequence Metering Invert Unit and Breaker12SWITCHBOARDS▪ Available with current transformerprovisions on load side and can beinverted for current transformerprovision on line side.▪ Tamperproof enclosure with hingeddoor over current transformercompartment with latch for utilitycompany sealing.▪ Current transformer provisions areadjustable for use with 12" or 14.5"primary bar type current transformer.▪ Indoor construction for floormounting only.▪ All units supplied as top feed coldmetering only. Units may be fieldmodified as shown in the AvailableConfigurations listed in the table below.▪ Listed by Underwriters Laboratories’as suitable for use as serviceequipment only.Connectors (Per phase and neutral)AmpereConnectors SuitableRatingfor Cu or Al400A(1)–4/0–500 kcmil or(2)–250 kcmil600A(2)–4/0–500 kcmil800A(3)–250–500 kcmil1000–1200A (4)–250–500 kcmilBCT SwitchboardSymmetrical AmpsDimensionsAvailable ConfigurationsCatalog ListInterrupting CapacityAmpere(inches)Top Feed Top Feed Bottom FeedNumber Price $ 240V 480V 600V Rating System Voltage Height Width Depth Cold Seq. Hot Seq. Cold / Hot Seq.BCT436JXD6 6805.00 65,000 35,000 25,000120/240V 1-Phase, 3-Wire 400BCT436HJD6 10922.00 100,000 65,000 35,000 208Y/120V 3-Phase, 4-Wire BCT636LXD6 9720.00 65,000 35,000 25,000240V 3-Phase, 3-Wire 70 32 13.75 600BCT636HLD6 12467.00 100,000 65,000 35,000 480Y/277V 3-Phase, 4-Wire BCT836MXD6 12752.00 65,000 50,000 25,000480 or 600V 3-Phase, 3-Wire 800BCT836HMD6 17194.00 100,000 65,000 50,000 BCT1036NXD6 15220.00 65,000 — — 1000BCT1036HND6 20066.00 100,000 — — 208Y/120V 3-Phase, 4-Wire 90 32 13.75 BCT1236NXD6 20135.00 65,000 — —240V 3-Phase, 3-Wire 1200BCT1236HND6 25777.00 100,000 — — PTE 1439.00 Potential Transformer Enclosure — — 20 20 10For inches / millimeters conversion, see conversion tablein Application Data section.= Warehouse Stock12-24Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule SWBD

Service Entrance SwitchboardsFusible Switch — SCT Service CubicleService Entrance Fusible Switch▪ Quick-Make — Quick-Break Fusible deadfront switch.▪ Interlocked door over fuses withprovisions for padlocking switch.▪ Door over current transformer sectionwith latch arrangement for utilitycompany seal.▪ Current transformer provisions areadjustable for use with 12" or 14.5"primary bar type current transformer.▪ Indoor construction for floormounting only.▪ Compact tamperproof enclosure withhinged door over current transformercompartment with latch for utilitycompany sealing.▪ Listed by Underwriters Laboratories’as suitable for use as serviceequipment only.Selection12 SWITCHBOARDSConnectors (Per phase and neutral)AmpereConnectors SuitableRatingfor Cu or Al400A(1)–4/0–500 kcmil or(2)–250 kcmil600A(2)–4/0–500 kcmil800A(3)–250–500 kcmil1000–1200A (4)–250–500 kcmilAmpereSymmetrical AmperesRating Fuse Clip Interrupting Capacity400–600 R 200,000800–1200 L 100,000SCT SwitchboardDimensionsCatalog NumberListAmpere(inches)Cold Sequence Hot Sequence Price $ Rating System Voltage Height Width DepthSCT432 LSCT432 7314.00 400 120/240V 1-Phase, 3-WireSCT632 LSCT632 9161.00 600208Y/120V 3-Phase, 4-Wire240V3-Phase, 3-WireSCT436 LSCT436 8516.00 400 480Y/277V 3-Phase, 4-Wire90 32 20SCT636 LSCT636 9755.00 600 480 or 600V 3-Phase, 3-WireSCT836 LSCT836 14244.00 800 All —SCT1236 LSCT1236 17695.00 1200208Y/120V 3-Phase, 4-Wire240V3-Phase, 3-WireFor inches / millimeters conversion, see conversion tablein Application Data section.= Warehouse StockDiscount Schedule SWBD Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 12-25

12SWITCHBOARDSSwitchboard Replacement and Modification KitsReplacement Data, Accessories, ModificationsConnecting Strap Kits — Circuit BreakerDiscount Schedule SWBDFor use with Series 5 or 6 CDP Circuit Breaker Panelboards orFC20, FCI, FCII, CDP-6, VB-6, SB1, SB2, and SB3 Switchboards —includes copper straps, cover plates and necessary hardware forswitchboards manufactured since 1974. Replacement strap kitsfor RCIII switchboards contact your local sales office.Strap KitCatalog List HeightBreaker Type Number Price $ (inches) MountingBL, BLH, HBL, BQD SBLBD 902.00 3.75 DNEB, HEB SEBD 902.00 3.75 DNGB SNBD 902.00 3.75 DED2, ED4, ED6, HED4,HED6, HHED66E62 1074.00 3.75 DCED6 6CLE2 1074.00 3.75 DQJ2, QJH2, QH2-H 6QJ2 1942.00 5. DFD6, FXD6, HFD6, HFXD6,HHFD6, HHFXD66F62 1942.00 5. DCFD6 6CLF1 1973.00 5. SJXD2, JD6, JXD6, HJD6,HJXD6, HHJD6, HHJXD6 6JJ61 2695.00 8.75 SSingle BranchJXD2, JD6, JXD6, HJD6,HJXD6, HHJD6, HHJXD6 6JJ62 2983.00 8.75 DDouble BranchCJD6 6CLJ1 2695.00 8.75 SSJD6, SHJD6 6SJL1 2695.00 8.75 SSCJD6 6SCJ1 2695.00 8.75 SLD6, LXD6, HLD6, HLXD6 6LL61 3207.00 8.75 SCLD6 6CLL1 3207.00 8.75 SSLD6, SHLD6 6SLL1 3207.00 8.75 SSCLD6 6SCL1 3207.00 8.75 SLMD6, LMXD6, HLMD6,HLMXD6SLM1D 3240.00 8.75 SMD6, MXD6, HMD6,HMXD6, CMD6SMND 3847.00 10. SSMD6, SHMD6, SCMD6 SSMND 4097.00 10. SNM, HM, LM,(VL Breaker)MG1D 3317.00 8.75 SND6, NXD6, HND6,HNXD6, CND6SMND 3847.00 10. SSND6, SHND6, SCND6 SSMND 4097.00 10. SNN, HN, LN,(VL Breaker)NG1D 3939.00 10 SNote: D = Denotes double branch or twin mountingS = Denotes single mountConnecting KitsFor use with SMM and SMD metering switchboards. Disconnect Strap Kit ListDevice Catalog Number Price $NGB SMMNGMK 135.00HEG SMMHEMK 135.00BQ, BQH, HBQ SMMBQMK 135.00QJ2, QJH2, QJ2-H SMMQJMK 135.00ED4, HED4 SMMEDMK 135.00FD6, HFD6 SMMFDMK 135.00CED6 SMMCEMK 135.00T-Fuse Pullout SMMTFMK 135.00SelectionFiller Plates — Discount Schedule SWBDFor use with Series 5 or 6 CDP Circuit Breaker Panelboards,FC-20, Class II, FCI, FCII, SB1, SB2, and SB3 Switchboards.Filler PlateCatalogBreaker Frame Number List Price $ NotesBQ, BQH, HBQ, E2,E4, E6, HE4, HE6,E2-A, E4-A, E6-A,HE4-A or HE6-A andQF3 2.80 Per PoleED2, ED4, ED6,HED4, HED6Note: When a front filler plate is not completely filled withbreakers, the openings in the unused space must beclosed with 1-pole filler plates from table.Connecting Strap Kits Vacu-Break and HCPDiscount Schedule SWBDFor use with VB-5, VB-6, FC-20, FC-I, FC-II, SB1, SB2 and SB3Switchboards. Includes copper straps and necessary hardware forSwitchboards manufactured since 1974.Ampere Unit Height Catalog ListRating (inches) Number Price $30-30 5, 7 1 ⁄230-60 5, 7 1 ⁄260-60 5, 7 1 ⁄2 VB657 302.0060-100 7 1 ⁄2100-100 7 1 ⁄2100 7 1 ⁄2200 7 1 ⁄2, 10 VB671 471.00200-200 10 VB610 511.00400-600 15 VB6150 211.00800-1200 16 1 ⁄4 F6162D 1366.00Blank Plates — Circuit Breaker and Vacu-Break Discount Schedule SWBDFor use with Series 5 or 6 VB and CDP Panelboards, FC20, Class II,FCI, FCII, SB1, SB2, and SB3 Switchboards.HeightCatalog Number(inches) Series 6 List Price $1 1 ⁄4 6FPB01 196.002 1 ⁄2 6FPB02 224.003 3 ⁄4 6FPB03 224.005 6FPB05 224.0010 6FPB10 302.00Note: Price breakers from circuit breaker section of this catalog.Replacement Meter Socket Kits For use with SMM and SMD metering switchboards.Strap KitListType Catalog Number Price $1-Phase MSK2001 281.003-Phase MSK2003 385.00For inches / millimeters conversion, see conversion tablein Application Data section.Consult sales office for availability.Connecting strap kit includes front filler plate.12-2610" plate accommodates 18 BQ or HBQ 1-pole breakers.Kits consist of all necessary mounting hardware, lessdisconnect device and cable.Siemens meter sockets used in SMM switchboards builtafter 1/91.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogSiemens Type WMS263 Meter Sockets are rated 200AContinuous Duty.Type HCP.Special order component supplied by apparatus factory.Contact Sales for availability.Discount Schedule SWBD

13SPEEDFAX TM 2007-2008 SwitchgearContentsMedium Voltage Equipment 13-2 – 13-235-15 kV GM-SG and 38 kV GM38 Metal-Clad Switchgear 13-2 – 13-1538 kV GIS Metal-Clad Switchgear 13-165-15-27 kV SIMOSEC Metal-Enclosed Load Interrupter Switchgear 13-17MV Controllers (MVC) up to 7.2 kVReduced Voltage Starters (FVNR, RVPR, RVAT) 13-18 – 13-19Solid State Reduced Voltage Starter (SSRV) 13-19Motor Protection Options 13-20 – 13-22Arc Flash SolutionsSARRACS Remote Breaker Racking 13-23Remote Circuit Breaker Controller System 13-23Power Switching Centers 13-24Standard Design Air Insulated 13-245-15-27 kV SIMOSEC Metal-Enclosed Load Interrupter Switchgear 13-24Protective Relays & SCADA Systems 13-25 – 13-30SCADA/Substation Automation 13-25SIPROTEC Protective Relays 13-26 – 13-30Replacement Breakers & Retrofit Products 13-31 – 13-32Medium Voltage Replacement Circuit Breakers 13-31Safety Racking Solutions 13-32Field Services 13-33 – 13-36Start-up/Commissioning/Engineer-by-the-Day Services 13-33 – 13-34Power System Studies 13-35Arc Flash Study 13-36Secondary Unit Substations 13-37 – 13-41Overview 13-37Transformers (See Transformer Section 7)Dry Type 13-38Liquid Filled Type 13-39Transition Sections 13-40Switchboard Secondary (See Switchboard Section 12) 13-41Switchgear Secondary (See Low Voltage Switchgear) 13-41Low Voltage Switchgear 13-42 – 13-53Type WL Low Voltage Metal-Enclosed Switchgear 13-42 – 13-48Options 13-45Type WL Circuit BreakersRogowski Coil CT Technology 13-49Electronic Trip Units 13-49 – 13-50WL Communication Overview 13-51Arc Flash Solutions 13-52 – 13-5313 SWITCHGEARAll statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable. The accuracy or completenesshereof is not guaranteed. Since conditions of use are outside our control, the user should determine the suitability of the product for its intended use and assumes all risk andliability whatsoever in connection herewith.Residential Commercial Industrial

13SWITCHGEARMedium Voltage Equipment5-15 kV GM-SG and 38 kV GM38 Metal-Clad Switchgear GeneralOverviewFeaturesSiemens 5, 7, 15 and 38kV class mediumvoltage, one- or two-high vacuum circuitbreaker switchgear is of the metal-cladtype as covered by ANSI standardC37.20.2. All parts are completelyenclosed within grounded metal barriers.Circuit breakers are the horizontaldrawout type. Secondary control devicesand primary circuits are isolated fromeach other by shutters or barriers.Primary circuits of different potential arealso separated by barriers. All primarybus work and joints are completelyencased with insulation material to suitthe voltage class of the equipment.Each vertical section may contain a mainbus bar section and two compartmentsfor auxiliary devices and / or circuitbreakers, with primary and secondarydisconnects, instrument transformers,instruments and relays, secondary wiringand other necessary components. Theswitchgear is designed so that additionalvertical sections with circuit breakersand / or auxiliary compartments may beadded in the future.The space saving potential of the 5-15kVtype GM-SG cubicle and GMSG circuitbreaker designs allows up to twodrawout elements to be furnished in asingle vertical section. The units can befurnished with two 2000 ampere circuitbreakers in one unit. For 3000 ampereself-cooled or 4000 ampere fan-cooledcircuit breakers, one rollout auxiliary canbe located in the lower cell, with thecircuit breaker in the upper cell; or thecell can be left blank, with the circuitbreaker located in the lower cell.Floor RolloutCircuit breakers in the lower cell can berolled out directly on the floor in front ofthe unit, without a handling device, lifttruck, or hoist for indoor and Shelter-Clad(walk-in) outdoor installations. A lift truckaccessory is optionally available forhandling circuit breakers in the upper cellof the 5-15kV GM-SG switchgear, or innon-walk-in outdoor enclosures, or forinstallations of switchgear on a raised“housekeeping” pad.Closed Door RackingThe cell mounted racking mechanismmay be operated with the cell door openor closed, through a small opening in thelower section of each door. For racking, amanual drive crank or an optional electricmotor drive may be used.Automatic ShuttersAutomatically operated grounded steelshutters are included to allow or blockaccess to the stationary primarydisconnects. The shutters are designedto remain closed until they are forcedopen by insertion of the circuit breaker.This design maximizes protection formaintenance personnel, as compared toracking mechanism operated shutters,which could be opened with the circuitbreaker out of the cell thereby exposingpersonnel to energized components.White Interior Device Panels in FrontCompartments Standard5 through 15kV Available in Two-High Design38kV Available in One-High DesignOnlyTested to ANSI StandardsSiemens switchgear is tested to meetthe requirements of ANSI standards. Acomplete design test program includingshort circuit interruption, load currentswitching, continuous current,mechanical endurance, close and latchcurrent, short time and momentarywithstand, impulse withstand, and theother tests required by the standards hasbeen successfully completed. Certifiedtest data can be furnished to customersupon request. These tests encompassthe complete equipment design,including both the switchgear structureand the circuit breaker removableelement.4000A Rating (5–15kV)Designs are available to 3000A selfcooled,and 4000A fan cooled.3000A Rating (38kV)Designs are available to 2000A selfcooledand 3000A fan cooled.UL listingUL listings to ANSI C37.54/C37.55standards is optionally available.cUL Available50kA Interrupting Rating Available atup to 15kVSiemens Relays, see Relaying sectionon page 13-25For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.13-2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Medium Voltage EquipmentGM-SG OverviewSiemens GM-SG 5kV, 7.2kV and 15kV metal-clad powerswitchgear assemblies with horizontal drawout type GMSGvacuum circuit breakers take advantage of the latestdevelopments in vacuum interrupter technology. Up to twocircuit breakers can be stacked in a single vertical section,allowing significant space savings.The equipment meets or exceeds the latest standards of ANSI,IEEE, and NEMA.GM-SG switchgear is designed for use in industrial plants,commercial buildings, electric utility systems, cogenerationinstallations, and other electrical systems. It is commonlyused for protection and switching of transformers, motors,generators, capacitors, buses, distribution feeder lines, and, ingeneral, for protection of any medium voltage power circuit.Siemens experience gained in over 80 years of supplying metalcladswitchgear in the U.S. has been captured in the GM-SGdesign. The objective has been to incorporate features designedto provide safety, while simplifying operation, maintenance, andminimizing installation cost.The switchgear structure and the drawout vacuum circuitbreaker are an integrated design, with dielectric, thermal, andinterruption integrity built directly into the basic design, notadded as an afterthought.Siemens 3AH3 Operating MechanismThe GMSG circuit breaker uses the proven Siemens 3AH3stored-energy operating mechanism. This operator is anevolution of the 3A family of operators first introduced in 1976.Over 60,000 3AH3 operating mechanisms have been producedsince 1998.Faster InterruptionStandard interrupting time is 5-cycles with an option availablefor 3-cycle interrupting time.Siemens Vacuum InterruptersThe vacuum interrupters used in the GMSG circuit breaker aremanufactured by Siemens and have been proven in thousandsof installations since 1976. The chrome-copper contact designused in these interrupters assures low chopping levels,eliminating the need for surge protection on most circuits.Front Mounted Operating MechanismThe simple GMSG operating mechanism makes maintenanceand inspection easy. The mechanism is located on the front ofthe circuit breaker, rather than underneath.GeneralMaintenance IntervalsIf applied under ANSl “usual service” conditions, maintenanceof the circuit breaker mechanism is only needed at ten yearintervals.Maintenance of the switchgear cubicle is recommended at fiveyear intervals, and primarily consists of cleaning insulation.Floor RolloutNo lift truck or dolly is needed to insert or remove circuit breakersin the lower cell of switchgear located at floor level. For indoorswitchgear located on a raised “housekeeping” pad or foroutdoor non-walk-in switchgear, a lift truck is required to handlecircuit breakers."Universal" Spare Breaker (up to 50kA)The physical configuration and interlock logic allow the use of asingle circuit breaker to serve as a “universal” spare breaker atan installation site for up to 50kA. The interlock logic checks theprincipal rating characteristics (continuous current, maximumvoltage, and interrupting current), and allows a circuit breaker tobe inserted in any circuit breaker cell, provided that the circuitbreaker equals or exceeds the ratings required by the cell.Single Source ResponsibilitySingle source responsibility is assured since the completeequipment is designed by Siemens and is manufactured andtested in a single facility. The vacuum circuit breakers arechecked in the switchgear cells as part of production testing,and shipped in the switchgear to assure interchangeabilityand reduce the possibility of damage to circuit breakers inshipment.Full ANSI Design BackgroundFull design integrity is assured. ANSl C37.09 and C37.20.2require design tests on circuit breakers and structures together.The 3AH3 operator is produced in our global center ofcompetence for circuit breakers in Berlin, and final assemblyof both the drawout GMSG circuit breaker and the switchgearstructures occurs in a single facility. Siemens controls theentire process, from design concept to production. Recordsare maintained to document compliance with ANSl standards.UL or C-UL Listing AvailableWhere the arrangement of components allows, UL or C-ULListing is available.Quality SystemsFacilities involved with application, engineering, design andproduction are certified to ISO 9001 requirements.13 SWITCHGEARSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-3

13SWITCHGEARMedium Voltage EquipmentGM-SG OverviewFigure 1: GM-SG Switchgear 1200A or 2000ACircuit Breaker SectionABCDAEA. Current transformers2 per bushingstandard accuracyB. Upper circuit breakerC. Isolated relay andinstrument compartmentD. Inter-unit wiringE. Lower circuit breakerF. Outgoing cable lugs(downfeed shown)G. Surge arrestersH. Ground sensor CTI. Main bus barsJ. Removable barrierK. Power cable ductStructural FlexibilitySiemens GM-SG metal-clad switchgear provides enhancedflexibility in locating circuit breaker, auxiliary, and metering cellswithin the structure layout. Circuit breakers rated 1200A and2000A may be located in upper or lower cell positions.Bus sectionalizing (tie) circuit breaker cells may be located onthe upper or lower levels and are ordinarily located next to anauxiliary cell on the same level to accommodate transition buswork.3000A circuit breakers can be located either in the bottom cellor the top cell of a vertical section. If the 3000A circuit breakeris located in the lower cell, the upper cell can be used formetering devices only. If the 3000A circuit breaker is in theupper cell, the lower cell may be used to house a set ofdrawout voltage transformers, or a drawout control powertransformer, or rollout fuses for a remote control powertransformer.The 3000A circuit breaker can be used for 4000A continuouscurrent applications, with the addition of fan coolingequipment in the auxiliary cell above or below the circuitbreaker. This application of fan cooling is well suited if loadsabove 3000A are infrequent, as for example, in the case of afan-cooled rating on a power transformer.Each vertical section contains the main bus bar compartmentplus a rear compartment for incoming and outgoingconnections. The front portion of the vertical section containsFGHIJKHGenerala central secondary device compartment, located betweentwo cells for auxiliary devices and / or circuit breakers,including primary and secondary disconnects, instrumenttransformers, instruments and relays, secondary wiring, andother components as necessary. The switchgear is normallydesigned so that additional vertical sections may be added inthe future.Enclosure DesignThe GM-SG design includes full ANSI/IEEE C37.20.2 Metal-Clad construction. This means complete enclosure of all liveparts and separation of major portions of the circuit to retardthe spread of faults to other compartments. Removable platespermit access to all compartments. The rear panels areindividually removable to allow separate access either todownfeed or upfeed cable connections.The structure is constructed of bolted steel for betterdimensional control than with welded designs. Sheet steelinterunit barriers extend the full height and depth of eachvertical section for isolating adjacent sections. The ground busextends the entire length of the complete switchgear lineup,and to all circuit breaker cells.Circuit Breaker InterchangeabilityThe GM-SG switchgear cubicle and the removable GMSGcircuit breaker element are both built to master fixtures socircuit breakers of the same ratings are interchangeable witheach other even if the circuit breaker is required for use with acell with "provisions only" supplied years earlier. The GMSGcircuit breaker is not interchangeable with the older designs.A circuit breaker of higher rating (up to 50kA) can be used in acell of equal or lower rating, i.e., a 3000A 50kA 15kV circuitbreaker can be used in a 1200A 25kA 15kV circuit breaker cell.Tested to ANSl/IEEE StandardsSiemens GM-SG switchgear is tested to meet therequirements of ANSl/IEEE standards. A complete design testprogram, including short circuit interruption, load currentswitching, continuous current, mechanical endurance, closeand latch current, short time and momentary withstand,impulse withstand, and the other tests required by thestandards has been successfully completed. These testsencompass the complete equipment design, including boththe switchgear structure and the circuit breaker removableelement. Production tests in accordance with ANSl/IEEEstandards are performed on every group of switchgear and oneach circuit breaker. Certified copies of all test data can befurnished to customers upon request.The switchgear is not classified as arc-resistant switchgear,and has not been tested for resistance to internal arcing perIEEE C37.20.7. Qualification to seismic requirements ofvarious codes (e.g., IBC-2006, UBC, IEEE 693, etc.) isavailable. Consult Siemens with detailed requirements.UL or C-UL Listing AvailableWhen specified, if the component configuration allows, theswitchgear can be provided with the UL or C-UL (for use inCanada) listed label, indicating conformance to therequirements of ANSl C37.54 and ANSI C37.55.13-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Medium Voltage EquipmentGM-SG Vacuum Circuit BreakersType GMSG Vacuum Circuit Breakers5kV, 7.2kV and 15kVSiemens Type GMSG circuit breakers are available in 25kAthrough 63kA* interrupting classes, or 250MVA through1000MVA on the older “constant MVA” rating basis.Continuous current ratings include 1200A, 2000A, and 3000Aself-cooled. 4000A is available using a 3000A circuit breakertogether with forced-air (fan) cooling in the switchgear cubicle.*Consult factory for availability of 63kAMaintenance FeaturesThe GMSG circuit breakers incorporate many featuresdesigned to reduce and simplify maintenance, including:▪ Virtually maintenance-free vacuum interrupter▪ Ten year maintenance interval▪ Floor rollout▪ Front mounted operator▪ Common operator family▪ Simple outer-phase barriers▪ “Universal” spare circuit breaker concept▪ Non-sliding current transfer▪ Rugged secondary disconnectsTen Year Maintenance Interval on GMSG Circuit BreakerWhen applied under mild conditions (ANSI “usual service”conditions), maintenance is only needed at ten year intervalson the circuit breaker. The maintenance interval for theswitchgear cubicles is five years.Low Maintenance RequirementsThe interrupter is a sealed unit, so the only maintenancenecessary is to clean off any contaminants and to check thevacuum integrity. The vacuum interrupters can bedisconnected from the stored energy mechanism quickly,without tools, and vacuum integrity inspected by hand;alternatively, a simple hi-pot test can be used.GeneralFloor RolloutWhen located in the lower cell, the circuit breakers arearranged to rollout directly on the floor in front of theswitchgear if the switchgear is not located on a“housekeeping” pad. No adapter, hoist, or lift truck isnecessary.Mechanism OperationThe mechanism is arranged to pre-store closing energy in theclosing springs. The closing springs are selected so that theyprovide sufficient energy not only to close the circuit breakersafely into maximum "close and latch" currents, but also topre-store the tripping energy necessary to open the circuitbreaker. The closing springs can be manually charged duringmaintenance or in emergency conditions, but are normallycharged electrically automatically after each closing operation.InterlocksThe racking system prevents racking of a closed circuitbreaker, and keeps the circuit breaker trip-free during racking.The racking mechanism can be padlocked to preventunauthorized operation. Padlocks can also be applied to theracking mechanism to maintain the circuit breaker in the tripfreecondition.Stored Energy OperatorThe GMSG circuit breaker utilizes the Siemens 3AH3 storedenergy operator for long life, high reliability, and ease ofmaintenance. Parts used in the manufacture of the circuitbreaker are precision tooled or produced on numericallycontrolled equipment. The circuit breaker design includesfrequent use of inherent alignment techniques.13 SWITCHGEARFront Side (barriers removed) RearFigure 2: GMSG Circuit BreakerSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-5

Medium Voltage EquipmentGM-SG RatingsSelectionTable 1: Type GMSG Circuit Breaker Ratings (New “Constant kA” Ratings Basis)These ratings are in accordance with the following standards:▪ ANSI/IEEE C37.04-1999 Standard Rating Structure for AC High-Voltage Circuit Breakers▪ ANSI C37.06-2000 AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and RelatedRequired Capabilities▪ ANSI/IEEE C37.09-1999 Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis▪ ANSI/IEEE C37.010-1999 Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current BasisCircuit Breaker Type 13SWITCHGEARRated ValuesUnits5-GMSG-40xxxx-1045-GMSG-50xxxx-1305-GMSG-63 xxxx-1647-GMSG-40xxxx-10415-GMSG-25xxxx-6515-GMSG-40xxxx-10415-GMSG-50xxxx-130Maximum Design Voltage (V) kV rms 4.76 4.76 4.76 8.25 15.0 15.0 15.0 15.0Voltage Range Factor (K) — 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0WithstandVoltage LevelsPowerFrequencyLightningImpulse (BIL)15-GMSG-63 xxxx-164kV rms 19 19 19 36 36 36 36 36kV crest 60 60 60 95 95 95 95 95Continuous A rms1200200030004000FC1200200030004000FC1200200030004000FC1200200030004000FC120020001200200030004000FC1200200030004000FC1200200030004000FCShort-Circuit (I) kA rms sym 40 50 63 40 25 40 50 63Interrupting Time mscycles835835835835835835835835Permissible Tripping Delay (Y) Sec 2 2 2 2 2 2 2 2Max. Sym. Interrupting (I) kA rms sym 40 50 63 40 25 40 50 63% dc Component % 47 47 47 47 47 47 47 47Short-Time Current (I)(3 seconds)kA rms 40 50 63 40 25 40 50 63Closing & Latching(Momentary) Asymmetrical(1.55 x I)kA rms 62 78 98 62 39 62 78 98Closing & Latching(Momentary)Peak(2.6 x I)kA peak 104 130 164 104 65 104 130 164 “xxxx” in type designation refers to the continuous current rating 1200, 2000, or3000A, as appropriate. The 4000A fan-cooled rating is achieved using a 3000Acircuit breaker, in combination with fan cooling as indicated in footnote 4. Maximum design voltage for which the circuit breaker is designed, and the upperlimit for operation. K is listed for informational purposes only. For circuit breakers rated on a “constantkA basis”, the voltage range factor is 1.0. 4000FC indicates that fan cooling is included in the switchgear structure for thisrating. 4000A rating is not available in outdoor equipment. All values apply to polyphase and line-to-line faults. Standard duty cycle is O - 0.3s - CO - 3 min. - CO. Standard rated interrupting time is 5 cycles (83ms). Optional rated interrupting timeof 3 cycles (50ms) is available. Consult factory for availability.13-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Medium Voltage EquipmentGM-SG RatingsTable 2: Type GMSG Circuit Breaker Control Data TypeSwitchCircuitBreakerControl Voltages, ANSI C37.06Spring Charging MotorClose CoilTrip CoilRange Amperes ChargingNominalClose Trip Amperes Amperes Run (Avg.) Seconds24 VDC 19 - 28 14 - 28 5.8 17 / — — —48 VDC 36 - 56 28 - 56 2.9 11.4 / 30 8 10125 VDC 100 - 140 70 - 140 1.0 4.8 / 7.4 4 10250 VDC 200 - 280 140 - 280 0.5 2.1 / 4.2 2 10120 VAC 104 - 127 104 - 127 0.9 — 6 10240 VAC 208 - 254 208 - 254 0.4 — 3 10 Current at nominal voltage. Capacitor trip. Value preceding slash ( / ) is the current for the standard trip coil with standardrating interrupting time. Value following ( / ) is current for optional trip coilwith 3-cycle interrupting time. — means this selection not available in this voltage.Table 3: Interrupting Capacity Auxiliary Switch Contacts ContinuousCurrentAmperes120ACControl Circuit Voltage240AC48DC125DC250DC10 10 5 10 / 30 5 3TOC 15 15 10 0.5 0.5 0.2MOC 20 15 10 10 10 5 2 contacts in series. All switch contacts are non-convertible.Table 4: Voltage TransformersVoltageClassRatioAccuracy Classat 120V Sec.X, Y, Z Z ZZVAThermalRating5kV 2400 / 120 0.3 1.2 — 5005kV 4200 / 120 0.3 1.2 — 5005kV 4800 / 120 0.3 1.2 — 50015kV 7200 / 120 0.3 0.3 1.2 100015kV 8400 / 120 0.3 0.3 1.2 100015kV 12000 / 120 0.3 0.3 1.2 100015kV 14400 / 120 0.3 0.3 1.2 1000Table 5: Current Transformers SelectionRatio60Hz Metering Accuracy at Burden RelayB0.1 B0.5 B1.0 B2.0 ClassType MD Torroidal Standard Accuracy100:5 2.4 — — — C 15150:5 0.6 2.4 — — C 20200:5 0.6 1.2 — — C 25250:5 0.6 1.2 2.4 — C 35300:5 0.6 0.6 1.2 2.4 C 40400:5 0.3 0.6 1.2 2.4 C 60500:5 0.3 0.3 0.6 1.2 C 75600:5 0.3 0.3 0.6 1.2 C100800:5 0.3 0.3 0.6 0.6 C1301000:5 0.3 0.3 0.3 0.3 C1701200:5 0.3 0.3 0.3 0.3 C2001500:5 0.3 0.3 0.3 0.3 C2002000:5 0.3 0.3 0.3 0.3 C2102500:5 0.3 0.3 0.3 0.3 C3003000:5 0.3 0.3 0.3 0.3 C2404000:5 0.3 0.3 0.3 0.3 C230Type MDD Torroidal Special Accuracy75:5 2.4 4.8 — — C 20100:5 1.2 2.4 — — C 30150:5 0.6 1.2 2.4 4.8 C 40200:5 0.6 1.2 1.2 2.4 C 60250:5 0.3 0.6 1.2 2.4 C 80300:5 0.3 0.6 0.6 1.2 C100400:5 0.3 0.3 0.6 0.6 C130500:5 0.3 0.3 0.3 0.6 C160600:5 0.3 0.3 0.3 0.3 C210800:5 0.3 0.3 0.3 0.3 C2701000:5 0.3 0.3 0.3 0.3 C3401200:5 0.3 0.3 0.3 0.3 C4251500:5 0.3 0.3 0.3 0.3 C5102000:5 0.3 0.3 0.3 0.3 C4602500:5 0.3 0.3 0.3 0.3 C5803000:5 0.3 0.3 0.3 0.3 C6604000:5 0.3 0.3 0.3 0.3 C460 1-second through-current and momentary current are equal to the ratings ofthe associated circuit breakers. Exceeds ANSI C37.20.2 Accuracy Limit. Multi-ratio current transformers available. The accuracy ratings shown applyonly to the full secondary winding.13 SWITCHGEARSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-7

Medium Voltage EquipmentGM-SGTable 6: Cubicle Dimensions Per Vertical Section DimensionsTypeDimensions in Inches (mm)Height Width Depth Drawout AisleWeight in lbs. (kg)Indoor GM-SG 95.25 (2419) 36.0 (914) 98.5 (2502) 72.0 (1829)recommended 3300 (1497)Shelter-Clad Single-Aisle SGM-SG 114.75 (2915) 36.0 (914) 173.5 (4407) 72.0 (1829)includedShelter-Clad Common Aisle SGM-SG 114.75 (2915) 36.0 (914) 269.0 (6833) 72.0 (1829)included5000 (2268)8900 (4037)13SWITCHGEARAisle-Less Non-Walk-In OGM-SG 113.62 (2886) 36.0 (914) 101.9 (2588) 72.0 (1829)recommended 3950 (1792)Table 7: GMSG Vacuum Circuit Breaker Weight in lbs. (kg) ContinuousCurrent (A)5-GMSG-405-GMSG-2505-GMSG-505-GMSG-3505-GMSG-63Circuit Breaker Type7-GMSG-407-GMSG-50015-GMSG-2515-GMSG-50015-GMSG-4015-GMSG-75015-GMSG-5015-GMSG-100015-GMSG-631200 440 (200) 455 (206) 809 (368) 455 (206) 430 (195) 445 (202) 460 (209) 819 (372)2000 650 (295) 665 (302) 819 (372) 665 (302) 640 (290) 670 (304) 675 (306) 829 (377)3000 665 (302) 670 (304) 824 (375) 675 (306) — 675 (306) 680 (308) 834 (379) Weight does not include circuit breakers, add separately from table 7. Weight estimates are for circuit breaker only. Add 75 lbs (34 kg) if shipped separately packaged. Weight and dimensions are approximate. Add 6” (152 mm) to each end of lineup for aisle extension 12” (304 mm) total. 72” (1829 mm) aisle space recommended allows room for interchange of circuit breakers. Minimum aisle space required for handling circuit breaker withlift truck is 65” (1651 mm). Minimum aisle space required if all circuit breakers are at floor level is 54” (1372 mm). Add for roof overhang.Non-Walk-InShelter-CladRear (cable side) 3.62” (92 mm) 3.62” (92 mm)Front (drawout side) 5.37” (136 mm) 1.5” (38 mm) If indoor switchgear is installed on a raised “housekeeping” pad, the pad must not extend further than 3” (75 mm) from the front of the switchgear to avoidinterference with the use of the portable lift truck. Approximate circuit breaker dimensions in inches (mm) (W X D X H):Net32” (813 mm) X 39” (991 mm) X 36” (914 mm)If packed for shipment separate from switchgear:42” (1067 mm) X 47” (1194 mm) X 43” (1092 mm)13-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Medium Voltage EquipmentGM-SG Stacking VersatilityDimensions1200ACircuitBreaker1200ACircuitBreakerAuxiliaryAuxiliary1200ACircuitBreakerA A DAC2000ACircuitBreakerALV PanelLV PanelLV PanelLV PanelLV Panel1200ACircuitBreakerBAuxiliaryAuxiliaryEF1200ACircuitBreakerB2000ACircuitBreakerB1200ACircuitBreakerB13 SWITCHGEAR2000ACircuitBreakerAuxiliaryVented Auxiliary2000A3000AC C CCircuitCircuitBreakerBreakerAuxiliaryVented AuxiliaryA DA DADLV PanelLV PanelLV PanelLV PanelLV PanelLV Panel2000ACircuitBreakerB2000ACircuitBreakerBAuxiliaryAuxiliaryEF3000A CircuitBreakerBVented AuxiliaryEFAuxiliaryAuxiliaryEFFigure 3: GM-SG Stacking Versatility Main bus sizes 1200A, 2000A, 3000A or 4000A (self-cooled). No rollout auxiliaries allowed in upper cell (C or D) if lower cell (B) has 3000Acircuit breaker. If 3000A circuit breaker is located in upper cell (A), onerollout auxiliary may be located in lower cell F. Auxiliary cells (C, D, E, or F) may each contain 1 rollout (except as indicatedin notes 2 and 5). Fuse rollout for stationary control power transformer must be located inlower rollout cell F, if CPT is located in rear or is remote. If CPT is located inlower auxiliary cell (E and F), fuse rollout is located in upper auxiliary cell. For fan cooled 4000A rating, circuit breaker (3000A self-cooled, 4000A fancooled)may be located in upper cell (A) with fan cooling in cell E, or may belocated in lower cell (B) with fan cooling in cells C and D. Stacking arrangements are available as shown. Total circuit breaker loading ina vertical unit may not exceed main bus rating. Consult Siemens for specificapplication assistance regarding total load limits in each unit, or refer toANSI/IEEE C37.20.2.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-9

13SWITCHGEARMedium Voltage EquipmentGM-SG AccessoriesStandard Accessories Include:▪ Manual racking crank▪ Spring charging crank▪ Drawout extension rails (facilitate handling of circuit breakersin upper cell)▪ Lifting sling (for circuit breakers above floor level)▪ Split plug jumper (standard unless test cabinet is furnished)▪ Contact lubricant▪ Touch up paintOptional Accessories Include:▪ Circuit breaker lift device▪ Test cabinet (in place of split plug jumper)▪ Test plugs (if required by devices)▪ Electric racking motor assembly (to enable racking whileoperator is at a distance from the switchgear)▪ Manual or electrical ground and test deviceTest provisions, either a split plug jumper or a test cabinet, areavailable for testing the circuit breaker outside its cubicle.The split plug jumper is used to bridge the secondary disconnectswith a flexible cable, so the circuit breaker may be electricallyclosed and tripped with the control switch on the instrumentpanel while the circuit breaker is outside of its compartment. Thetest cabinet, including a control switch is used for closing andtripping the circuit breaker at a location remote from theswitchgear.Manual Ground and Test DeviceThis is a drawout element that can be inserted into a circuitbreaker cell. It opens the shutters, connects to the cell primarydisconnecting contacts, and so provides a means to make theprimary disconnect stabs available for testing. It is suitable forhigh potential testing of outgoing circuits of the switchgearmain bus, or for phase sequence checking. It also provides ameans to connect temporary grounds to de-energized circuitsfor maintenance purposes.The manual ground and test incorporates three-position singlepoleswitches (upper stabs to ground, neutral, and lower stabsto ground), eliminating the need for user-furnished groundcables. The switches are hook-stick operatable and are ratedfor the full momentary and short-time ratings of the associatedswitchgear. User-furnished grounding cables and commerciallyavailable ground clamps seldom have ratings equal to those ofthe switchgear.GeneralElectrical Ground and Test DeviceAn electrical ground and test device includes a power operatedswitch (derived from a GMSG circuit breaker) arranged to allowgrounding one set of disconnect stabs. Two devices, one eachfor the upper and lower stabs, are required if grounding isdesired to either side of the unit. The device also provides ameans of access to the primary circuits for high potential testsor for phase sequence checking. These devices are able toclose and latch against short circuit currents corresponding tothe ratings of the equipment. Due to the unique requirementsfrequently involved in such devices, all applications ofelectrically operated ground and test devices should be referredto Siemens for review.Note: Due to the special nature of ground and test devices,each user must develop definitive operating procedures forincorporating safe operating practices. Only qualified personnelshould be allowed to use ground and test devices.Figure 4: Accessory Cabinet13-10Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Medium Voltage EquipmentGM-SGFigure 5: Switchgear End ViewsDimensionsType GM-SG Indoor SwitchgearType OGM-SG Non-walk-in Outdoor Switchgear13 SWITCHGEARType SGM-SG Shelter-clad Single Aisle Outdoor SwitchgearType SGM-SG Shelter-clad Common Aisle Outdoor SwitchgearSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-11

13SWITCHGEARMedium Voltage Equipment38 kV GM38 Metal-Clad Switchgear General/SpecificationsDrawout Indoor Switchgear▪ Horizontal drawout type 38-3AHvacuum circuit breaker▪ Uses the latest developments invacuum interrupter technologyRatingsTable 8Measured ParameterGeneral Nominal Voltage ClassRatedValuesTable 9Type 38-3AH Circuit Breaker Ratings▪ Highly reliable vacuum interrupters –MTTF over 42,500 years▪ Up to 50 full-fault interruptions▪ Meets or exceeds the latest ANSI,IEEE and NEMA standards▪ Universal spare circuit breaker▪ Interlock permits insertion of higherrating vacuum circuit breaker intolower rated cell but not vice-versa▪ Front accessible circuit breakeroperating mechanism for ease ofmaintenance▪ Closed door racking▪ Floor rollout circuit breaker in lowercell without a dollyCircuit Breaker Type38-3AH- 38-3AH-1500 31 RelatedRequiredCapabilities38-3AH-40 kV 38.0 38.0 38.0Nominal 3-PhaseRatedVoltageInsulationLevelsMVA Class MaxVoltage Range FactorRated WithstandTest VoltageLow FrequencyImpulseMVAE kV RMSKkV RMSkV Crest150038.01.65801501200—38.01.0801501200—38.01.0801501200Continuous Amperes 2000 2000 20003000FC 3000FC 3000FCRatedCurrent Short circuit (at rated max. kV) I kA RMS 21 31.5 40Interrupting TimeCycles 5 5 5Permissible Tripping Delay YSec.2 2 2Rated Max. Voltage Divided by KE/K kV RMS 23 38 38CurrentMax. Sym. Interrupting K Times Rated kA RMS 35 31.5 403-Sec. Short Time Short CircuitCurrent Carrying Current KI kA RMS 35 31.5 40Closing andkA RMS 56 50 62Latching(Momentary) kA Crest 95 85 104 Type 38-3AH-1500 ratings are in accord with ANSI C37.06-1987. Type 38-3AH-31 and 38-3AH-40 ratings conform toC37.06-2000 ratings. Maximum voltage for which the circuit breaker is designed and the upper limit for operation. K is the ratio of rated maximum voltage to the lower limit of the range of operating voltage in which the requiredsymmetrical and asymmetrical interrupting capabilities vary in inverse proportion to the operating voltage. 3000 ampere ratings are achieved using forced air cooling in the switchgear cubicle. To obtain the required symmetrical interrupting capability of a circuit breaker at an operating voltage between 1/K timesrated maximum voltage and rated maximum voltage, the following formula shall be used.Rated Maximum VoltageRequired Symmetrical Interrupting Capacity = Rated Short Circuit Current ×Operating VoltageFor operating voltages below 1/K times rated maximum voltage, the required symmetrical interrupting capability of thecircuit breaker shall be equal to K times rated short circuit current. With the limitations stated in 5.10 of ANSI Standard C37.04-1979, all values apply for polyphase and line-to-line faults.For single phase-to-ground faults, the specific conditions stated in 5.10.2.3 of ANSI Standard C37.04-1979 apply. Current values in this row are not to be exceeded even for voltages below 1/K times rated maximum voltage.For voltages between rated maximum voltage and 1/K times rated maximum voltage, follow 5 above. Current values in this row are independent of operating voltage up to and including rated maximum voltage. Included for reference only—not listed in ANSI C37.06.Type 38-3AH Circuit Breaker Control DataControl Voltages, ANSI C37.06 Table 10 Coil Amperes Spring Charging MotorRangeAmperesNominal Close Trip Close Trip Run (Avg.) Inrush (Peak)ChargingSeconds48 VDC 38–56 28–56 2.1 20 8 2510125 VDC 100–140 70–140 1.0 5.4 4 1810250 VDC 200–280 140–280 0.5 2.1 2 1010120 VAC 104–127 — 0.9 — 6 —10240 VAC 208–254 — 0.4 — 3 —10 Current at nominal voltage.▪ Visible secondary disconnect▪ One high construction▪ Pair with Siemens relays to match anyapplicationTable 10 Interrupting CapacityAuxiliary Switch ContactsTypeSwitchCont.CurrentAmperesNon-inductiveBreaker 10TOC15MOC 20InductiveBreakerTOCMOCTable 11Table 12Volt.Class38kV1 Bushing38kV2 Bushing101520RatioCircuit InterruptingCapacity in AmperesControl Circuit Voltage120AC 240AC 48DC 125DC 250DC10 5 10 9.6 4.815 10 0.5 0.5 0.215 10 10 10 56 3 10 6 315 10 0.5 0.5 0.215 10 10 10 5Current Transformers 60 Hz Metering Accuracyat BurdenRatio B0.1 B0.5 B1.0 B2.0Type MD38 Torroidal Standard Accuracy100:5150:5200:5250:5300:5400:5500:5 600:5800:51000:5 1200:51500:5 2000:52500:5 3000:52.40.60.60.60.60.30.30.30.30.30.30.30.30.30.3—2.41.21.21.20.60.30.30.30.30.30.30.30.30.3Type MDD38 High Accuracy 2.475:.5100:5150:5200:5250:5300:5400:5500:5600:5800:51000:5 1200:51500:52000:52500:53000:52.41.20.60.60.30.30.30.30.30.30.30.30.30.30.34.84.82.41.21.20.60.60.30.30.30.30.30.30.30.30.3Voltage TransformersAccuracyClassat 120VW,X,Y,Z ZZVAThermalRating(55°CAmb)20125:115 0.3 1.2 100024000:12027600:11534500:115———2.41.21.20.60.60.60.30.30.30.30.30.3——4.82.41.21.20.60.60.60.30.30.30.30.30.30.3————2.41.21.21.20.60.30.30.30.30.30.3——4.84.82.42.41.20.60.60.30.30.30.30.30.30.3RelayClassC 10C 20C 25C 35C 40C 60C 75C100C130C170C200C180C210C300C300C 15C 20C 35C 50C 70C 90C120C150C200C250C300C400C440C450C550C700 1-second through-current and momentary current areequal to the ratings of the associated circuit breakers. Exceeds ANSI C37.20.2 Accuracy Limit. Multi-ratio current transformers available. The accuracyratings shown apply only to the full secondary winding.0.3 1.2 100013-12Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Medium Voltage Equipment38 kV GM38 Metal-Clad Switchgear DimensionsEnclosure DimensionsTable 13TypeIndoorShelter-CladSingle-AisleShelter-CladCommon-AisleAisle-LessNon-Walk-InCubicle Dimensions-Per Vertical SectionWeightin lbs.(kg) Add 6 in. (152 mm) to each end of lineupfor aisle extension, 12 in. (305 mm) total.Dimensions in inches (mm)Width DepthDrawout AisleGM38 5000 (2273) 48 (1219) 110 (2794) 96 (2438) RecommendedSGM38 6400 (2909) 48 (1219) 132.5 (3366) 96 (2438) IncludedSGM38 11700 (5318) 48 (1219) 132.5 (3366) 96 (2438) IncludedOGM38 5800 (2636) 48 (1219) 130.5 (3315) 96 (2438) RecommendedAdd for roof overhang Non-Walk-in Shelter-CladRear (Cable Side)Front3.875 in. (98 mm)6.875 in. (175 mm)3.875 in. (98 mm)1.5 in. (38 mm)Table 14 38-3AH Circuit BreakerWeights in lbs. (kg)Cont.CurrentAmps1200Circuit Breaker Type38-3AH-1500 38-3AH-31800 (364) 800 (364)2000 900 (409) 900 (409)3000 1000 (455) 1000 (455)38-3AH-40850 (387)950 (432)1050 (478)13 SWITCHGEAREnd View of Indoor SwitchgearType GM38End View of Single Aisle SwitchgearType SGM38End View of Aisle-Less Outdoor Switchgear(Non Walk-In) Type OGM38End View of Common Aisle SwitchgearType SGM38For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-13

Medium Voltage Equipment38 kV GM38 Metal-Clad Switchgear DimensionsFloor PlansSWITCHGEAR13Indoor GM38 SwitchgearOutdoor SGM38 Shelter-CladWalk-In Single Aisle SwitchgearOutdoor OGM38Non Walk-in Switchgear Recommended location of conduits forpower cables, top or bottom. Recommended location of secondaryleads, top or bottom. Customer conduit not to extend morethan 1 in. (25 mm) above floor line. Allow 6 in. (152 mm) clearance for lifttruck on each end. Floor must be level 80 in. (2032 mm) infront of switchgear to allow properoperation of lift truck.Outdoor SGM38 Shelter-CladWalk-In Common-Aisle SwitchgearTable 15 38kV Switchgear Floor Plan DetailDimensions in inches (mm)ABCDEFGHJKLMNOPQRSTUVWX130.0(3302)48.0(1219)40.0(1016)42.5(1080)22.0(559)4.0(102)7.5(191)3.5(89)4.25(108)43.75(1111)45.88(1165)0.12(3)43.12(1095)2.82(72)43.75(1111)2.13(54)1.16(29)45.84(1164)87.06(2211)126.91(3224)6.0(152)47.5(1207)96.0(2438)13-14Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Medium Voltage Equipment38 kV GM38 Metal-Clad Switchgear DimensionsSide Views — 1200, 2000, 3000A Breakers / AuxiliaryAuxiliary / 1200A-3000A Breaker(No drawout auxiliaries in upper cell for3000A breaker)VT Auxiliary / 1200A or 2000A Breaker(Downfeed Cables)13 SWITCHGEARAuxiliary / 1200A or 2000A Breaker(Upfeed Cables)CPT Fuse Truck / Stationary 3 CPTAuxiliary / Bus Tie BreakerAuxiliary / Feeder Breaker(Adjacent to right side of tie breaker section)Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-15

13SWITCHGEARMedium Voltage Equipment38 kV GIS Metal-Clad Switchgear General/SpecificationsGISTypes 8DA10 and 8DB10 MediumVoltage Gas-Insulated Switchgear aregas insulated, vacuum circuit breakerdesigns with a voltage range of 4.16kVto 38kV. Lightning impulse withstandvoltage ratings up to 200kV BIL andinterrupting ratings up to 40kA areavailable.The 8DA10 and 8DB10 Medium VoltageGas-Insulated Switchgear designsfeature fixed-mounted vacuum circuitbreakers, connectable to the main busthrough three-position (closed-openreadyto ground) switches. The positionof the switches is externally observablefrom the front of the unit using aconvenient camera system. MediumVoltage Gas-Insulated Switchgear issuitable for systems where small size,arc resistance, environmental immunity,or reduced maintenance needs areimportant. Depending upon the voltagerating, Medium Voltage Gas-InsulatedSwitchgear is approximately 1/5 thesize of conventional air insulatedswitchgear.MV Vacuum Interrupter GISThe 8DA and 8DB – up to 38kV, 2500A,40kA, 200kV BIL.▪ Inherently arc-resistant▪ Significantly reduced P.P.E. needs▪ Compact – 80% smaller than airinsulated switchgear▪ 20 year internal maintenance cycle▪ Meets IEEE and IEC standards▪ UL or C-UL Listing available▪ Single phase design eliminates phaseto-phasefaults▪ Meets NEC visible disconnectrequirement▪ Well suited for contaminatedenvironments▪ Pair with Siemens Protective Relaysto match any applicationGIS Specification SheetRated Values8DA10 3-pole / 8DB10 3-poleVoltage Max. kV 15 27 38Frequency kV 60 Hz 60 Hz 60 HzShort-dur. power-frequency withstand voltage kV 36 60 80Lightning impulse withstand voltage kV 95 125 170; 200*Short-circuit breaking current up to 40kA up to 40kA up to 40kAShort-time withstand current, 3s up to 40kA up to 40kA up to 40kAShort-circuit making current (peak) up to 104kA up to 104kA up to 104kAPeak withstand current up to 104kA up to 104kA up to 104kANormal current of busbar up to 4000A up to 4000A up to 4000ANormal current of feeders up to 2500A up to 2500A up to 2500A* On request. Consult factory8DA Dimensions8DB DimensionsBus2Bus134"34"73"93"83"93"15" 15" 11" 13"24" 24"64"29" 29" 11" 13"105"Front view Side view Front view Side view13-16Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Medium Voltage Equipment5–15–27 kV SIMOSEC Metal-Enclosed Load Interrupter Switchgear General/SpecificationsSIMOSECMedium voltage metal-enclosed loadinterrupter indoor switchgear up to27.6kV.▪ Extremely compact footprint▪ Meets ANSI / IEEE C37.20.3▪ UL or C-uL listing available▪ Seismic up to Zone 4 (optional)▪ High switching capacity – 100operations @ 600A▪ Gas insulated three-position switchdisconnector,hermetically sealed forlife inside the stainless steel vessel▪ Switch-disconnector combines thefunction of a load interrupter switch(with CLOSED-OPEN indication) and agrounding switch (with OPEN-GROUND indication)▪ HV HRC fuses and cable terminationsaccessible only if the feeder groundingswitch is in the grounded position▪ Fuses and outgoing cables frontaccessible▪ Standard viewing window for visibleverification of isolating distance▪ Standard capacitive voltage presenceindicator▪ Integrated mechanical interlocking▪ Animated mimic diagram▪ Main bus at top or bottom to suitapplication▪ Configurations: individual feederswitches, transformer primary switches& switch lineups▪ Ideal for utility, construction & industrialapplications▪ Over 20 years field experience andmore than 350,000 switch-disconnectorunits installed13 SWITCHGEARCable SwitchCSFused SwitchFSMeteringMTCable ConnectionCCSIMOSEC Specification SheetDimensionsWidthDepthHeightRatingsCable Switch Fused Switch Metering Cable ConnectionCS FS MT CC1Single cable or fuse 14.8" 1 (375mm) 14.8" 1 (375mm) 19.7" 3 (500mm) 14.8" 1 (375mm)2 Two cables or double-barrel fuse3Width depends on equipment arrangement19.7" 2 (500mm) 19.7" 2 (500mm) 29.5" 3 (750mm) 19.7" 2 (500mm)48.4" (1230mm)88.6 - 100.4" (2250 - 2850mm) depending on arrangementRated voltage Up to 5kV 8.25kV & 15kV 27.6kVRated frequency 50 / 60 50 / 60 50 / 60Rated short-duration power-frequency withstand voltage 19kV 36kV 60kVRated lightning impulse withstand voltage (BIL) 60kV 95kV 125kVRated short-time withstand currenttk = rated duration of short2 Sec Up to 25kA Up to 25kA Up to 20kASingle fuse FS-1 325A 165A 65AMaximum fused continuous current(not fuse E rating)Double fuse FS-2 575A 305A 117ATriple fuse FS-3 600A 430A 156AMain bus continuous 600A, 1200A 600A, 1200A 600A, 1200ASwitch-disconnectorContinuous 600A 600A 600AInterrupting 600A 600A 600ACapacitive voltage indicatorCable discharge switch (1.6kA 1-sec) (optional)Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-17

13SWITCHGEARMedium Voltage EquipmentMV Controllers (MVC) up to 7.2 kVGeneralThe design and manufacture of the Series81000 meduim voltage controller unit isbased on our experience as a leadingmanufacturer of motors worldwide. Thebenefits of this experience result in controlscheme flexibility and increased safety,while simplifying operations, maintenance,and minimizing installation costs. Typicalapplications include:▪ Squirrel-Cage Induction Motors (nonreversing,reversing, and multi-speed)▪ Reduced Voltage Starters(autotransformer reactor or solid-statetype)▪ Synchronous motors (brush or brushlesstype)▪ Wound Rotor Motors — with or withoutsecondary control▪ Transformer Feeders▪ Capacitor Bank Feeders▪ Power Bus Feeders (Tie)The utilization voltage range for thecontrollers is 2300 through 7200 volts AC.The Siemens Series 81000 mediumvoltage controller allows the user tocombine vacuum contactors, latchedcontactors and load break switches in onelineup. The user can also connect directlyto Siemens GM-SG Medium Voltageswitchgear without additional transitionsections. This provides extreme flexibilityin systems design.Stationary Controllers:▪ Full Voltage (FVNR)▪ Reduced Voltage PrimaryReactor (RVPR)▪ Reduced VoltageAutotransformer (RVAT)Load Break Switches (LBS)Drawout Controllers:▪ Full Voltage (FVNR)▪ Reduced Voltage Primary Reactor(RVPR)▪ Reduced Voltage Autotransformer(RVAT)▪ Reduced Voltage Solid State (SSRV)▪ Brushless Synchronous (BL-SYNCH)▪ Brushtype Synchronous (BT-SYNCH)▪ Two Speed Two Winding (2S2W)▪ Two Speed One Winding (2S1W)▪ Wound Rotor (WR)▪ ReversingE2 (Fused) Contactors — To meetinterrupting capability required for NEMAClass E2 controllers, the 97H3 and 96H6contactors are provided with primarycurrent limiting fuses in all three phases.The resulting interrupting ratings areshown in the Table 17.Table 17SystemVoltage2300 3602300 7204000 3604000 7204600 3604600 720360Series 81000 Ratings5kA10kA5kA10kA5kA10kA7.2kA200 MVA200 MVA350 MVA350 MVA400 MVA400 MVA570 MVA15003000250055002500550040001750350030006000300060005000DrawoutTable 16 Controllers and Load Break Switches Selection TableMaximumMotorSizeLoad BreakSwitch(LBS)EnclosedContinuousAmpereRatingNominal motor voltage 6600V.UnfusedClass E1InterruptingCapacityFusedClass E2Motor Horsepower Rating(3 Phase)SynchronousMotors0.8 PF 1.0 PFInductionMotors1500300025005500250055004000MaximumMotorFuseRating24R57X24R57X24R57X24RGeneralStationaryControllerType 2.3kV 4.16kV 6.9kV 13.8kVStationary to 1500HP to 2500HP to 4000HP —Drawout to 3000HP to 5500HP to 4000HP —SSRV to 3000HP to 5500HP to 4000HP to 5500HP600A Fused Fused — —Unfused Unfused Unfused —1200A Fused Fused — —Unfused Unfused Unfused —TransformerLoadsMaximum3-PhasekVA1500200025003500250040001500MaximumFuseRating450E600E450E600E450E600E200EFor more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.13-18Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Medium Voltage EquipmentMV Controllers (MVC) up to 7.2 kVStationaryThe Siemens Series 81000 MVC is alsooffered in a stationary contactor design.The one high stationary starters can beconfigured in a reduced height (75") andreduced width (24") stand-alone enclosurefacilitating a smaller footprint and reducedshipping cost.GeneralMain and Vertical Bus Construction (shownwith optional insulation)Power BusAll power bus is isolated behind groundedsteel barriers. Automatic shutters areprovided to cover the line-side bus stabswhenever a starter door is opened.Horizontal bus ratings range from 600through 3000 amperes and are furtherdetailed in Table 18. Vertical tap buses ineach section are rated 360, 540, or 720amperes, depending on the application.Insulated bus with boots are available asoptions.DrawoutThe Siemens Series 81000 DrawoutMedium Voltage Motor Controller is amodular design consisting of up to threevacuum contactors per vertical sectioneach with three current limiting fuses, allhoused in a free-standing sheet steelenclosure.The completely drawout contactorcarriage (360A) includes all major powercomponents (vacuum contactor, powerfuses, CPT, CPT fuses) on a wheeled,drawout carriage. The drawout contactorcarriage includes a quick disconnect plugfor secondary connections. Drawout fusecarriages are used when loads require720A vacuum contactors.Contactors are available in up to threehigh mounting for 5kV and 360A.The drawout controllers are available in awide range of starter types, includingSolid State Reduced Voltage.Table 18Series 81000 Bus RatingsContinuousConductorSize inInches (mm)Type Bus AmperesMain600Horizontal 100012001000120020003000Vertical 360540720Ground 6003000A bus must be located on top of unit.0.25 (6) x 3.0 (76)0.375 (10) x 3.0 (76)0.50 (13) x 3.0 (76)0.25 (6) x 3.0 (76)0.375 (10) x 3.0 (76)2 x 0.375 (10) x 3.0 (76)3 x 0.50 (13) x 3.0 (76)0.25 x (6) x 1.0 (25)0.25 (6) x 1.5 (38)0.50 (13) x 2.0 (51)0.25 (6) x 2.0 (51)Solid State Reduced VoltageController (SSRVC)Soft Start Advantages▪ Minimize system maintenance andrepair▪ Reduce system downtime▪ Increase productivity▪ Minimize mechanical wear and tear▪ Reduce inrush currents▪ Reduce motor torque for prolongedmotor lifeStandard Features▪ Drawout main fused contactor (360A)▪ Drawout main fuses with fixed-mountedmain contactor (720A)▪ Bypass contactor▪ Heavy duty soft start module▪ 125% continuous duty rating (on softstart module only)▪ Digital microprocessor control with nonvolatilememory▪ Fiber optic isolation▪ Advanced electronic motor protection▪ Metering▪ Alphanumeric LCD display▪ Keypad programming▪ Modbus RTU communicationsConductorMaterialAluminumCopperCurrentDensity(Amps/in 2 )80088980013331067889667144014407201200Solid State Reduced VoltageStandard Adjustment Capabilities▪ Soft start and stop▪ Voltage and current rampStarting Methods (settable)▪ Current limit and dual ramp▪ Learned acceleration curve or userdefined (custom) acceleration curve▪ Kick start and jogOptional Features▪ Zero sequence ground fault protection▪ Profibus communicationsFlexibility▪ Available in lineups with up to 3000Amain bus directly connected with Metal-Clad Switchgear, Load InterrupterSwitches, or other Class E2 ControllersSafety▪ Full drawout construction means powerfuse changes are done outside of theenclosureReliability▪ Made under ISO 9001 Quality SystemstandardsDependability▪ Series 81000 Controllers have been inproduction for over 20 yearsUL Listed13 SWITCHGEARFor more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-19

13SWITCHGEARMedium Voltage EquipmentMV Controllers (MVC) up to 7.2 kVFuse ApplicationTable 19MaximumDesignedVoltage50807200Type FM Fuse DataCurrentDesignation2R (1 barrel)3R4R6R9R12R18R (2 barrel)24R38R57X (3 barrel)2R (1 barrel)3R4R6R9R12R18R (2 barrel)24RContinuousCurrentat 40°C7010013017020023039045060090070100130170200230390450MinimumInterruptingCapability190225330500 Single Phase740955144019103000450019022533050074095514401910InterruptingRating50/60 Hz80kA RMSAsymmetrical(210MVA at 2.4kV)(415MVA at 4.8kV)Single Phase80kA RMSAsymmetrical(620MVA at 7.2kV)GeneralType FM Fuses Installed on 97H3 ContactorFor Non-Motor LoadsThe principal application for ANSI “E”rated fuses in Series 81000 controllers isfor non-rotating loads, such astransformer feeders. The followingtabulation may be used for estimatingwhich “E” rated fuse is appropriate for aparticular 3-phase transformerapplication.Table 20 Typical Fuse Sizesfor Transformer ProtectionFuse Size at:2.4kV 4.16kV 4.8kV 6.9kVTransformerkVA4575112.51502253005007501000150020002500300025E30E40E50E80E100E200E250E400E450E———10E15E20E30E40E65E100E150E200E300E400E450E—10E15E20E25E40E50E80E125E200E250E350E400E450E—10E15E20E25E40E65E100E125E200E———Note: Fuse sizes are based on 133% overload capacity,except 1500kVA at 2.4kV. 2500kVA at 4.16kV. and3000kVA at 4.8kV.Fuse ratings higher or lower than thoselisted in Table 20 may be necessary if thetransformer has unusual magnetizing(inrush) current characteristics, or forproper coordination with the secondaryprotective device (secondary fuse, lowvoltage circuit breaker trip device,overcurrent relay, etc.). Transformeroverload capability may also have abearing on fuse selection. However, thistable is accurate for most typicaltransformer feeder applications.The “E” rated fuses have the sameinterrupting current ratings as the typeFM or A720R “R” rated fuses. Both arerated at 50kA symmetrical and 80kAasymmetrical interrupting.All medium voltage controllers employcurrent limiting fuses for short circuitprotection. The term “current limiting”derives from the operating characteristicsof the fuse. Figure 6 shows graphicallyhow, for maximum fault levels, the fuseoperates within the first 1/4 cycle of shortcircuit current. This limits the energy “letthru”well below peak values, thusproviding “current limitation.”Figure 6 Current Limiting EffectA mechanical indicator “pops-out” of theend of the fuse if the fuse has operated.This provides a visual means for checkingthe condition of the fuse, and also acts toengage the optional blown fuse trip baron the 97H3 contactor.Current designations 2R through 24R(38R and 57X (“X” rated) for fuses on720A) are used to distinguish one fusesize from another within the samevoltage rating. Ampere ratings are notused to identify medium voltage fuses,since fuse selection involves manydifferent variables. Among these aremotor locked rotor and running current,acceleration time, and the time currentcharacteristics of the overload relay used.The fuses are installed on the top of the97H3 vacuum contactor or on the drawoutfuse carriage used with the 96H6contactor. No fuse pullers or special toolsare required to install or replace the fuses.13-20Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Medium Voltage EquipmentMV Controllers (MVC) up to 7.2 kVTable 21 MV Controllers Dimensions and Specification SheetDimensions/SpecificationEnclosure Dimensions in InchesNEMA 1, 1A or 12 N3R-WI N3RNWIDrawout or Number of 107" 103"Type Stationary Rating Contactors Height Width Depth Width Width5kV 360A 30Drawout 5kV 720A 1 90 36 36 42 42Induction Full Voltage7kV 360A90Non-Reversing (FVNR)Stationary5kV 360A1 75/90 24 36 42 427kV 360A5kV 360A 60/72 78 78Reduced Voltage Primary Drawout 5kV 720A 2 90 96/108 36 114 120Reactor Non-Reversing 7kV 360A 72/96 78/114 120(RVPR)Stationary5kV 360A7kV 360A2 75/90 60 36 78 785kV 360A 60/72 78 78Reduced Voltage- Drawout 5kV 720A 3 90 96/108 36 114 120Autotransformer 7kV 360A 72/96 78/114 120Non-Reversing (RVAT)Stationary5kV 360A7kV 360A3 75/90 60 78 785kV 360A 36 42 42Induction FullVoltage Reversing (FVR)Drawout 5kV 720A 3 90 72 36 78 787kV 360A 36 42 425kV 360A 60/72 78 78Synchronous Full VoltageNon-Reversing (FVNRS)Drawout 5kV 720A 1 90 72/84 36 78/114 78/1207kV 360A 72/84 78/114 78/120Synchronous Reduced 5kV 360A 84/108 114 120Voltage-Autotransformer Drawout 5kV 720A 3 90 132/144 36 150 156Non-Reversing (RVATS) 7kV 360A 132 150 1565kV 360A 36 42 42Induction Full Voltage 2-SpeedDrawout 5kV 720A 2 90 72 36 78 782-Winding (2S2W)7kV 360A 72 78 785kV 360A 36 42 42Induction Full Voltage 2-SpeedDrawout 5kV 720A 3 90 36 1-Winding (2S1W)7kV 360A 72 78 785kV 360A 30Latched Contactor Drawout 5kV 720A 1 90 36 36 42 427kV 360A 905kV 360A 36 36 42 42Solid State Reduced VoltageDrawout5kV 720A2 9072 36 78 78Non-Reversing (SSRV) 7kV 360A 72 36 78 7815kV 300A 126 48 – –LBS Unfused 600A or 1200A – 5kV / 7kV – 90 36 36 42 42LBS 600A Fused or1200A/900E Fused– 5kV – 90 72 36 78 7818Incoming Line Main Lugs Only – 5kV / 7kV – 90 24 36 42 4236 Also available in 45" construction for 2-high arrangement,requires top mounted bus. Consult factory.Typical Floor Plan Details for Class E2 Medium Voltage Controllers13 SWITCHGEARDetail A — Floor Plan View — Bottom Conduit EntryDetail B — Floor Plan View — Conduit Entry TopTable 22A90.00(2286)MVC Floor Plan Dimensions in Inches (mm)B36.00(914)C32.75(832)D31.00(787)E21.88(556)F1.12(28)G4.68(119)H2.13(54)J34.94(887)K10.06(256)L6.06(154)M4.42(112)N3.50(89)O2.87(73)P29.50(749)Q68.50(1740)R32.50(826)Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-21

13Medium Voltage EquipmentMV Controllers (MVC) up to 7.2 kVMotor Protection OptionsDrive motors often play a decisive role inthe functioning of a production process.Motor damage and breakdowns notinfrequently lead also to consequentialdamage and production shutdowns, thecost of which significantly exceeds thecost of repairing the motor. Optimumdesign of the motor protection ensuresthat damage following thermal overloadis prevented, meaning that there is noreduction to the normal service life.Secondary faults are minimized in theevent of short circuits, ground faults andwinding faults. The spectrum extendsfrom small low-voltage motors with anoutput of a few kW to high voltagemotors with outputs measured in MW.Protection system design must be basedon the rating of the motor, theimportance of the drive for thetechnological process, the operatingconditions and the requirements of themotor manufacturer.Common motor protection functions andSIPROTEC motor protective relayselection tables are provided below.Protective RelayingSWITCHGEARProtection functions for various types of motor faultsFault Protection ANSI NumberStator thermal overload Stator thermal overload protection 49Rotor thermal overload during start2 Protection principles for the rotor overload protectiontoo long or blocked Motor starting time supervision 48too frequent Restart inhibit 66, 49RGround-fault Ground-fault protection (I 0 >;U 0 >; 10 MW7UM627UM61+ differential protection + (Option: Generator Basic)+ control functions 7UM62+ high accuracy (Option: Generator Basic)+ high sensitivity or with control functions via bay mimic diagram in graphic display+ operating range in a wide 7SJ64frequency band (11Hz - 68Hz)+ (Option: Generator Basic)For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.13-22Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Medium Voltage EquipmentArc Flash SolutionsSARRACS Remote BreakerRackingProtection for your most importantinvestments: your personnel and yourequipment!Incidents of serious and sometimes fatalinjury have become an all too commonoccurrence when faults occur while circuitbreakers are being racked in or out on alive bus. NFPA 70E-2004 (referenced inOSHA 29CFR-1910-S Appendix “A”)requires that personnel wear full-bodyflash suits during racking procedures onan energized system. However, asoperators must stand within the flashboundary, they are still at considerablerisk due to intense heat, concussionforces and airborne debris should a faultexplosion occur. Now, by allowingoperators to remotely perform rackingprocedures from a distance of up to 40feet, SARRACS safety breaker systemfrom Siemens provides increasedprotection for your most importantinvestments: your personnel and yourequipment.SARRACS (with CustomTorque) provides the following:Operator Safety▪ Remote operation– Personnel safely operate breakerracking system from a distance of up to40 feet▪ Eliminates need for special personalprotective equipment (PPE) duringracking– Since operator is outside the flashboundary, a full-body flash suit is notrequired▪ Completely portable– Ball bearing wheels, casters, andtransport handle for easy maneuveringGeneralBreaker Safety▪ Utilizes state-of-the-art SIMATIC ® S7-200 PLC from Siemens– Digital position control for consistentand accurate breaker engagement– Customized position-torque controlprovides protection to minimizeequipment damage– Auto reverse (optional)– Speed control– Ramp up/ramp down– Interface optionsFlexibility▪ Programmable to allow for varying torqueprofiles and mechanical requirements ofindividual circuit breakers in a lineup▪ Mechanically adjustable to allow fordifferent circuit breakers in the samelineup▪ Portable and self-contained– Easy to store and transport– Strong but light (approx. 200 lb.)▪ Designs available for most circuitbreakersSiemens Industrial Services can providetraining and on-site modificaions if required.13 SWITCHGEARMedium Voltage EquipmentArc Flash SolutionsRemote Circuit BreakerController SystemAlternate to Arc-Resistant switchgearSiemens can offer a cost effectivesolution that satisfies the NFPA 70Erequirements which provides improvedpersonnel safety when coupled withconventional switchgear.With the Siemens CB Controller (C7)there is no longer a need to stand in frontof the circuit breaker cell to view circuitbreaker status, operate the circuit breakeror view metering information. All of thiscan be done from a safe distance fromthe switchgear.This places the operator or maintenancepersonnel at a safe distance while theyperform these necessary functions.Each lineup would be supplied with itsown controller as follows.The system consists of two hardwarelevels. They are the Siemens SIPROTECprotective relays installed for each circuitbreaker in the switchgear and the touchscreen CB Controller C7 mounted remote.The two levels are connected via aProfibus communication link. Allnecessary security measures are availableto prevent unauthorized usage.Siemens will configure the systemcompletely and test all communicationfunctionality and relay data.The above solution in conjunction withremote circuit breaker racking (seeTypical schemeGeneralSARRACS above) allows for circuitbreaker operation and racking withoutbeing in front of any circuit breaker duringthe trip/close function or the racking in/outprocedure.When operated correctly, a circuit breakercan be tripped and racked out withoutbeing in the flash hazard zone.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-23

13SWITCHGEARPower Switching CentersSIMOSEC Narrow Profile Gas InsulatedSIMOSECMedium voltage metal-enclosed loadinterrupter indoor switchgear up to 27.6kV.▪ Extremely compact footprint▪ Meets ANSI / IEEE C37.20.3▪ UL or C-uL listing available▪ Seismic up to Zone 4 (optional)▪ High switching capacity – 100 operations@ 600A▪ Gas insulated three-position switchdisconnector,hermetically sealed for lifeinside the stainless steel vessel▪ Switch-disconnector combines thefunction of a load interrupter switch(with CLOSED-OPEN indication) and agrounding switch (with OPEN-GROUNDindication)▪ HV HRC fuses and cable terminationsaccessible only if the feeder groundingswitch is in the grounded position▪ Fuses and outgoing cables frontaccessible▪ Standard viewing window for visibleverification of isolating distance▪ Standard capacitive voltage presenceindicator▪ Integrated mechanical interlocking▪ Animated mimic diagram▪ Main bus at top or bottom to suitapplication▪ Configurations: individual feederswitches, transformer primary switches& switch lineups▪ Ideal for utility, construction & industrialapplications▪ Over 20 years experience and more than350,000 switch-disconnector unitsinstalledGeneralSIMOSEC Information on page 13-1713-24Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Protective Relays & SCADA SystemsSCADA Substation AutomationSICAM PAS & SICAM StationManager IISICAM PAS (Power Automation System)can meet all the demands made of adistributed substation control system –both now and in the future, too. SICAMPAS was conceived as an open system,i.e., besides providing standardized datatransfer processes, it features userinterfaces for the integration of systemspecifictasks. SICAM PAS can thus beintegrated with ease in existing systemsand can be used for system integration.With modern diagnostics, it optimallysupports commissioning andmaintenance. SICAM PAS is clearlystructured and reliable, thanks to its open,fully documented and tested system.SICAM StationManager II combinesextensive IED integration capabilities, anIEC 1131 compliant programminginterface, some of the best configurationand diagnostic tools in the industry, andvarious advanced features like WANsupport, data encryption and HTML servercapabilities, to make it a perfectSubstation Data Concentrator.Major Features and Benefits:▪ Built-in power supply supporting 48 VDC,125 VDC, and 115 VAC power inputs▪ Three PC-104 card slots (instead of two);Support for new EPIC processor▪ Supports two Ethernet fiber converters;Demodulated IRIG-B input▪ Completely enclosed packaging; RS-485switches mounted on outside of chassis▪ StationManager II is completely softwarecompatible with StationManager IICCP Protocol Communications▪ Unexpected events occur in the realworld. ICCP runs in “real world”conditions▪ Secure communications are required tosupport confidentiality, integrity andavailability. ICCP/NT supports securecommunication using the ICCP PKIsecurity standard▪ With critical communications, reliableproducts are of utmost importanceSIPROTEC with IEC 61850 – for moreefficient power automationSIPROTEC – the standard for numericalprotective relaying – has established itselfright across the market. Besides thecommon system platform and the uniqueDIGSI 4 service software that may be usedfor all protective devices, it also supportsthe new IEC 61850 communicationstandard. A potential that offers even moreefficiency easily and conveniently.IEC 61850 – what it is and what it canachieveUsers and manufacturers jointly developedthe new international standard IEC 61850.It was approved in early 2004. The agreedaim of this standard is to arrive at aGeneralcomplete communication solution forsubstations, thus providing users withinteroperability among different makes onthe basis of Ethernet technology. Thisopens up a whole new dimension inefficient substation management. Not onlyshort-term savings in operation andmaintenance, but also simplifiedengineering, less complexity, and longtermexpandability can make you one of thewinners in tomorrow’s power market.Progress. It’s that simple.HMI ClientUsing a local or web-based HMI from theSICAM PAS you can monitor and control allparts of a system from a central point. Theclear display of the operating situationallows you to react fast; you consequentlyreduce your operating costs and canquickly restore power in the event ofmalfunctions. As an integrated overallsystem, SICAM PAS supports you all theway from the bay level to the controlcenter interface with fast data handling,with the flexibility of a programmable-logiccontroller and with the reliability philosophyof a classic telecontrol unit. Availability andflexibility will help you create state-of-theart,monitoring, control and protectionconcepts in power automation.13 SWITCHGEARSICAM RemoteTerminal UnitOPCDNPHMI ClientSICAM Station Mngr.Station Bus IEC 61850 (Ethernet)Siemens PLC’sModbus, DNP,Profibus DPProtection,Control,MeteringDNPProtection,Control,MeteringProtection, Control, MeteringPeer to Peer or GooseCapableSiemens Siprotec Relay (see Siprotecspecific info on page 13-26)Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-25

13SWITCHGEARProtective Relays & SCADA SystemsSIPROTEC Protective RelaysOverviewHigh-performance protective relayingcomes into its own when it’s a questionof minimizing power system operationgcosts.Uncomplicated operation, convenientcommissioning tools and flexiblecommunication are all importantelements when service and maintenancecosts have to be reduced. The SiemensSIPROTEC family with its protectionrelays and bay control units is anintegrated system for medium-voltage toextra-high-voltage applications.Numerical protection systems are nothingnew; after all, Siemens has more than 25years experience in this field. Althoughsystem hardware is still often referred toas protection equipment or units – aswas once the case with analogtechnology – it can now do so muchmore. These relays not only handle faultdetection and location tasks but alsocontrol, metering and monitoringfunctions. And it is these additionalfunctions – impossible before the adventof numerical technology – which offermajor cost-cutting potential.IEC 61850SIPROTEC — the standard for numericalprotective relaying — has establisheditself right across the market. Besides thecommon system platform and the uniqueDIGSI 4 service interface that may beused for all protective devices, it alsosupports the new IEC 61850communication standard. A potential thatoffers more efficiency, easily andconveniently. With SIPROTEC relays andbay control units from Siemens we offerall the advantages of an expert andinnovative partner in the field ofprotective relaying and substationautomation. We bring you attractivelypriced intelligent solutions by payingparticular attention to lowering your lifecycle and system management costs.These solutions are the first onesavailable on the market with theinternational IEC 61850 standard. Toenable you to profit from theseadvantages as quickly as possible,Siemens collaborated in the preparationof this international standard and madeevery effort to ensure no time was lost inbringing it out. The result is certainlyworth a look, because SIPROTEC andGeneralother Power Automation products andSiemens systems are available on thebasis of the IEC 61850 standard and caneven be retrofitted in systems suppliedsince 1998.System advantages▪ One bay, one unitThe SIPROTEC 4 relay family offers fullyintegrated protection, control, monitoring,and automation functions incorporated ina single device. For many applications,this product contains all the functions youneed to meet all your protection andcontrol requirements with just one unitper bay, saving on investment andinstallation costs and enhancingavailability.▪ DIGSI 4 – one tool for all tasks andproductsDIGSI 4 is a computer program designedfor all SIPROTEC relays. DIGSI 4 offersusers a universal tool for all support tasksfrom setting and commissioning ofdevices to simple analysis anddocumentation of system faults. Ourpowerful analysis tool speeds up troubleshootingand supplies important serviceinformation.For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.13-26Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Protective Relays & SCADA SystemsSIPROTEC Protective RelaysANSI Selection List for Protective RelaysSelectionANSI Number*7SA522 Distance7SA67SD600 Pilot wire differential7SD5 Line differential7SD6107SJ45 Overcurrent7SJ467SJ6007SJ6027SJ617SJ627SJ637SJ647VH60 Differential7UT6127UT6137UT637SS607SS527UM61 Generator andmotor protection7UM627VK61 Breaker management7VE6 Synchronizing7SV600 Breaker failure7RW600 Voltage, frequencyProtection Function14 Locked rotor protection — — — — — — — — — ● ● ● ● — — — — — — ■ ■ — — — —21 Distance protection, phase ■ ■ — ● — — — — — — — — — — — — — — — ■ ■ — — — —21N Distance protection, earth (ground) ■ ■ — ● — — — — — — — — — — — — — — — — — — — — —21FL Fault locator ■ ■ — ● — — — — — — ● ● ● — — — — — — — — — — — —24 Overfluxing (V/f protection) — — — — — — — — — — — — — — — ● ● — — ■ ■ — — — ■25 Synchronizing, synchronism check ● ● — ● — — — — — — — — ● — — — — — — — — ■ ■ — —27 Undervoltage ● ● — ● — — — — — — ● ● ● — — — ● — — ■ ■ ● ● — ■27/34 Stator earth-fault 3 rd harmonic — — — — — — — — — — — — — — — — — — — ■ ■ — — — —32 Directional power — — — — — — — — — — — — ● — — — ● — — — ■ — — — —32F Forward power — — — — — — — — — — — — ● — — — — — — ● ■ — — — —32R Reverse power — — — — — — — — — — — — ● — — — — — — ■ ■ — — — —37 Undercurrent or underpower — — — — — — — — ● ■ ■ ■ ■ — — — — — — — ■ — — — —40 Loss of field — — — — — — — — — — — — — — — — — — — ● ■ — — — —46 Load unbalance, negative phase- — — — — — — — ■ ■ ■ ■ ■ ■ — ● — ● — — ● ● — — — —sequence overcurrent47 Phase-sequence voltage ■ ■ — ■ — — — — — — ■ ■ ■ — — — — — — ■ ■ — — — —48 Incomplete sequence, locked rotor — — — — — — — — — — — — — — — — — — — ● ● — — — —49 Thermal overload — ● — ■ ■ — — ■ ■ ■ ■ ■ ■ — ■ ■ ■ — — ■ ■ — — — —49R Rotor thermal protection — — — — — — — ■ ■ ■ ■ ■ ■ — — — — — — — ■ — — — —49S Stator thermal protection — — — — — — — ■ ■ ■ ■ ■ ■ — — — — — — ■ ■ — — — —50 Instantaneous overcurrent ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ — ■ ■ ■ — ● ■ ■ ■ — — —50N Instantaneous earth-fault ■ ■ — ■ ■ — — ■ ■ ■ ■ ■ ■ — ■ ■ ■ — ● ■ ■ — — — —overcurrent50BF Breaker failure ● ● — ■ ● — — — ■ ■ ■ ■ ■ — ● ● ● — ■ ■ ■ ■ — ■ —51GN Zero speed and underspeed device — — — — — — — — — — — — — — — — — — — — ■ — — — —51 Overcurrent-time relay, phase ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ — ■ ■ ■ — ● ■ ■ — — — —51N Overcurrent-time relay, earth ■ ■ — ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ — ■ ■ ■ — ● ■ ■ — — — —51V Overcurrent-time relay, — — — — — — — — — — — — — — — — — — — ■ ■ — — — —voltage controlled59 Overvoltage ● ● — ● — — — — — — ● ● ● — — — ● — — ■ ■ ● ● — ■59N Residual voltage earth-fault ● ● — ● — — — — ■ — ■ ■ ■ — — — — — — ■ ■ — — — —protection59GN Stator earth-fault protection — — — — — — — — — — — — — — — — — — — ■ ■ — — — —64 100% Stator earth-fault — — — — — — — — — — — — — — — — — — — — ● — — — —protection (20 Hz)64R Rotor earth-fault — — — — — — — — — — — — — — — — — — — ■ ■ — — — —13 SWITCHGEAR■●✽Standard functionOptionalANSI/IEEE C37.2: IEEE Standard Electrical Power System Device Function NumbersFor more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-27

Protective Relays & SCADA SystemsSIPROTEC Protective RelaysANSI Selection List for Protective RelaysSelection13SWITCHGEARANSI Number*7SA522 Distance7SA67SD600 Pilot wire differential7SD5 Line differential7SD6107SJ45 Overcurrent7SJ467SJ6007SJ6027SJ617SJ627SJ637SJ647VH60 Differential7UT6127UT6137UT637SS607SS527UM61 Generator andmotor protection7UM627VK61 Breaker management7VE6 Synchronizing7SV600 Breaker failure7RW600 Voltage, frequencyProtection Function67 Directional overcurrent — — — — — — — — — — ■ ■ ■ — — — — — — ■ ■ — — — —67N Directional earth-fault overcurrent ● ● — ● — — — — ■ 1) — ■ ■ ■ — — — — — — ■ ■ — — — —67G Stator earth-fault — — — — — — — — — — — — — — — — — — — ■ ■ — — — —directional overcurrent68 Power swing detection ● ● — ● — — — — — — — — — — — — — — — — ● — — — —74TC Trip circuit supervision ■ ■ — ■ ■ — — ■ ■ ■ ■ ■ ■ — ● ● ● — — ■ ■ ■ — — —78 Out-of-step protection — — — — — — — — — — — — — — — — — — — — ■ — — — —79 Auto-reclosure ● ● — ● ● — — ● ● ● ● ● ● — — — — — — — — ■ — — —81 Frequency protection ■ ■ — ● — — — — — — ● ● ● — — — ● — — ■ ■ — ● — ■81R Rate-of-frequency-change protection — — — — — — — — — — — — — — — — — — — ● ● — ● — ●Vector jump supervision — — — — — — — — — — — — — — — — — — — ● ● — ● — —85 Carrier interface/remote trip ■ ■ ● ■ ■ — — — — — — — — — — — — — ■ — — — — — —86 Lockout function ■ ■ ■ ■ ■ — — — — ■ ■ ■ ■ — ■ ■ ■ ■ — ■ ■ ■ ● — —87G Differential protection generator — — — — — — — — — — — — — — ■ ■ ■ — — — ■ — — — —87T Differential protection transformer — — ■ ● ● — — — — — — — — ■ ■ ■ ■ — — — ■ — — — —87BB Differential protection busbar — — — — — — — — — — — — — — ■ ■ ■ ■ ■ — — — — — —87M Differential protection motor — — — — — — — — — — — — — — ■ ■ ■ — — — ■ — — — —87L Differential protection line — — ■ ■ ■ — — — — — — — — — ■ ■ ■ — — — — — — — —87N Restricted earth-fault protection — — — — — — — — — ■ ■ ■ ■ ■ ● ● ● — — — ● — — — —■●✽Standard functionOptionalANSI/IEEE C37.2: IEEE Standard Electrical Power System Device Function Numbers1) Only sensitive directional earth-fault overcurrent (67Ns).For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.13-28Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Protective Relays & SCADA SystemsSIPROTEC Protective RelaysSiemens Protective Relays - Quick Competitor Comparison by ApplicationMotor ProtectionModel Siemens Equivalent Typical Catalog NumberGE 239 SIMPRO SIMPRO-100-R-NGE 269 SIMPRO SIMPRO-100-R-NGE 269+ SIMPRO SIMPRO-100-R-NSelectionGE 369 SIMPRO SIMPRO-100-R-VGE 469 SIMPRO and 7SJ601 SIMPRO-100-R-V/7SJ6015-4EA01-0AA0Feeder ProtectionModel Siemens Equivalent Typical Catalog NumberABB CO (4 single phase) 7SJ45 (1 three phase) 7SJ4505-1EA00-1AA1 (1 three phase)7SJ46 (1 three phase)7SJ4605-1EA00-1AA0 (1 three phase)7SJ601 (1 three phase)7SJ6015-4EA01-0AA0 (1 three phase)ABB Microshield 7SJ600 7SJ6005-4EA00-0DA17SJ6027SJ6025-4EB00-1FA07SJ617SJ6115-5EC90-1FA0+L0D7SJ627SJ6215-5EC90-1FE0+L0DABB DPU-1500 7SJ62 7SJ6215-5EC90-1FE0+L0D7SJ637SJ6315-5EC90-1FE0+L0D7SJ647SJ6405-5EC92-1FE4+L0DABB DPU-2000R 7SJ62 7SJ6215-5EC90-1FE0+L0D7SJ637SJ6315-5EC90-1FE0+L0D7SJ647SJ6405-5EC92-1FE4+L0DBasler BE3-51 (4 single phase) 7SJ45 (1 three phase) 7SJ4505-1EA00-1AA1 (1 three phase)7SJ46 (1 three phase)7SJ4605-1EA00-1AA0 (1 three phase)Basler BE1-51 (4 single phase) 7SJ45 (1 three phase) 7SJ4505-1EA00-1AA1 (1 three phase)7SJ46 (1 three phase)7SJ4605-1EA00-1AA0 (1 three phase)7SJ601 (1 three phase)7SJ6015-4EA01-0AA0 (1 three phase)Basler BE1-851 7SJ600 7SJ6005-4EA00-0DA17SJ6027SJ6025-4EB00-1FA07SJ617SJ6115-5EC90-1FA0+L0DBasler BE1-951 7SJ62 7SJ6215-5EC90-1FE0+L0D7SJ637SJ6315-5EC90-1FE0+L0D7SJ647SJ6405-5EC92-1FE4+L0DGE MDP 7SJ45 7SJ4505-1EA00-1AA17SJ467SJ4605-1EA00-1AA07SJ6017SJ6015-4EA01-0AA0GE 735 7SJ600 7SJ6005-4EA00-0DA17SJ6027SJ6025-4EB00-1FA07SJ617SJ6115-5EC90-1FA0+L0DGE 750 7SJ62 7SJ6215-5EC90-1FE0+L0D7SJ637SJ6315-5EC90-1FE0+L0D7SJ647SJ6405-5EC92-1FE4+L0DGE F60 7SJ62 7SJ6215-5EC90-1FE0+L0D7SJ637SJ6315-5EC90-1FE0+L0D7SJ647SJ6405-5EC92-1FE4+L0DSEL 351A 7SJ62 7SJ6215-5EC90-1FE0+L0D7SJ637SJ6315-5EC90-1FE0+L0D7SJ647SJ6405-5EC92-1FE4+L0DSEL 351 7SJ62 7SJ6215-5EC90-1FE0+L0D7SJ637SJ6315-5EC90-1FE0+L0D7SJ647SJ6405-5EC92-1FE4+L0DSEL 351S 7SJ62 7SJ6215-5EC90-1FE0+L0D7SJ637SJ6315-5EC90-1FE0+L0D7SJ647SJ6405-5EC92-1FE4+L0DSEL 501 7SJ600 7SJ6005-4EA00-0DA17SJ6027SJ6025-4EB00-1FA07SJ617SJ6115-5EC90-1FA0+L0DSEL 551 7SJ600 7SJ6005-4EA00-0DA17SJ6027SJ6025-4EB00-1FA07SJ617SJ6115-5EC90-1FA0+L0D13 SWITCHGEAR*Siemens catalog numbers in Bold are the preferred equivalent model.Siemens does not accept any liability for the information contained in this document.For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-29

13SWITCHGEARProtective Relays & SCADA SystemsSIPROTEC Protective RelaysGeneral ProtectionModel Siemens Equivalent Typical Catalog NumberABB GPU2000 7UM62 7UM6215-5EC90-0BA0+L0DBasler BE1- GPS100 7UM61 7UM6115-5EC90-0CA0+L0D7UM627UM6215-5EC90-0BA0+L0DBeckwith M-3420 7UM61 7UM6115-5EC90-0CA0+L0D7UM627UM6215-5EC90-0BA0+L0DBeckwith M-3425 7UM62 7UM6215-5EC90-0CA0+L0DGE 489 7UM61 7UM6115-5EC90-0CA0+L0D7UM627UM6215-5EC90-0BA0+L0DSEL 300G 7UM61 7UM6115-5EC90-0CA0+L0D7UM627UM6215-5EC90-0BA0+L0DBus ProtectionModel Siemens Equivalent Typical Catalog NumberABB HU 7VH60 7VH6002-0EA20-0AA0ABB CA 7VH60 7VH6002-0EA20-0AA0ABB TPU2000R 7UT513 7UT5135-4GB11-1AA07UT6127UT6125-5EC00-1AA0Basler BE1-87 7UT513 7UT5135-4GB11-1AA07UT6127UT6125-5EC00-1AA0(3) 7VH60 7VH6002-0EA20-0AA0GE PVD 7VH60 7VH6002-0EA20-0AA0GE B30 7UT513 7UT5135-4GB11-1AA07UT6127UT6125-5EC00-1AA0SEL 387 7UT513 7UT5135-4GB11-1AA07UT6127UT6125-5EC00-1AA0Transformer ProtectionModel Siemens Equivalent Typical Catalog NumberABB HU (3) 7UT512 (1) 7UT5125-4GB11-0AA07UT513 (1)7UT5135-4GB11-1AA07UT612 (1)7UT6125-5EC00-1AA0ABB CA (3) 7UT512 (1) 7UT5125-4GB11-0AA07UT513 (1)7UT5135-4GB11-1AA07UT612 (1)7UT6125-5EC00-1AA0ABB TPU2000R 7UT512 7UT5125-4GB11-0AA07UT5137UT5135-4GB11-1AA07UT6127UT6125-5EC00-1AA0Basler BE1-CDS 7UT513 7UT5135-4GB11-1AA07UT6127UT6125-5EC00-1AA0GE 745 7UT513 7UT5135-4GB11-1AA07UT6127UT6125-5EC00-1AA0GE T60 7UT513 7UT5135-4GB11-1AA07UT6127UT6125-5EC00-1AA0SEL 387 7UT513 7UT5135-4GB11-1AA07UT6127UT6125-5EC00-1AA0SEL 587 7UT512 7UT5125-4GB11-0AA07UT5137UT5135-4GB11-1AA07UT6127UT6125-5EC00-1AA0Voltage/Frequency ProtectionModel Siemens Equivalent Typical Catalog NumberBasler BE1-27 7RW600 7RW60000-4EA00-0DA0Basler BE1-59 7RW600 7RW60000-4EA00-0DA0Basler BE1-27/59 7RW600 7RW60000-4EA00-0DA0Basler BE1-81O/U 7RW600 7RW60000-4EA00-0DA0GE IAV 7RW600 7RW60000-4EA00-0DA0GE IFV 7RW600 7RW60000-4EA00-0DA0GE MIV 7RW600 7RW60000-4EA00-0DA0GE NGV 7RW600 7RW60000-4EA00-0DA0GE DFF 7RW600 7RW60000-4EA00-0DA0GE MFF 7RW600 7RW60000-4EA00-0DA0GE SFF 7RW600 7RW60000-4EA00-0DA0Selection*Siemens catalog numbers in Bold are the preferred equivalent model.13-30Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Replacement Breakers & Retrofit ProductsMedium Voltage Replacement Circuit BreakersRatings from 5–38 kV, 250–1500 MVA,1200-3000 AmperesReplacement circuit breakers provide acost-effective way to upgrade yoursystem capabilities while saving you fromcostly maintenance and lost productivityand preserving your investment inexisting cubicles and cables.Whether your equipment was originallymanufactured by Allis-Chalmers,Westinghouse, GE, Federal Pacific, ITE,or another manufacturer, we will assistyou to evaluate the Siemens replacementoptions which best meet your needs.Why Replacement Breakers?▪ Increased Reliability and Performance▪ Reduced Operating and MaintenanceExpenditures▪ Reduced Downtime, MinimalChangeover Time During Upgrade▪ Preserved Investment in ExistingCubicles▪ Improved Employee andEnvironmental SafetyWhy Siemens?Siemens Offers the Best Vacuum CircuitBreaker in the Industry.▪ Superior Performance, Longer ServiceLife– 10,000 full load operation, 10-yearmaintenance cycle on replacementcircuit breakers with 3AH operator▪ Standard Operator on All SiemensReplacement, Medium VoltageDistribution, and Outdoor VacuumCircuit Breakers▪ Extensive Replacement BreakerExperience – 750+ projects since1983– Over 400,0000 3AF/H series circuitbreakers in service worldwide– Nuclear Class 1E Rated (350+breakers)▪ Full Range of Service Capabilities bySkilled Factory-Trained Engineers andTechniciansSiemens Medium Voltage Replacement Circuit BreakersThe following circuit breakers are available as pre-engineered designs. Othermanufacturers, models, and ratings can be engineered by Siemens.Transformer ProtectionGeneralManufacturer Model kV RatingsMVAAMPAllis-Chalmers AM 5 150 1200, 2000(All Air-Magnetic) 250 1200, 2000MB 7 250 1200, 2000500 1200, 2000MC/MCV 15 150 1200250 1200, 2000500 1200, 2000MA 5 250 1200, 2000350 1200, 2000FA 5 350 3000FB 7 500 1200, 2000, 3000FC/FCV 15 500 1200, 2000750 1200, 20001000 1200, 2000, 3000Siemens 3AF (2-High) 5 250 1200, 2000350 1200, 2000, 30007.5 500 1200, 2000, 300015 500 1200, 2000750 1200, 20001000 1200, 2000, 3000GE Magneblast (AMH) 4.16 250 600, 1200, 2000(All Air-Magnetic) Magneblast (AM) 2.4 100 600, 1200, 2000150 600, 1200, 20004.16 100 600, 1200, 2000150 600, 1200, 2000250 600, 1200, 2000350 1200, 2000, 30007.2 500 1200, 2000, 300013.8 250 1200, 2000500 1200, 2000750 1200, 20001000 1200, 2000, 3000Westinghouse DH 5 150 1200, 2000250 1200, 2000350 30007.5 500 1200, 200015 500 1200, 2000750 1200, 20001000 1200, 2000, 3000DHP 5 350 1200, 20007.5 500 1200, 200015 500 1200, 2000750, 750C 1200, 20001000 1200, 2000ITE HV 5 100 600, 1200150 600, 1200250 600, 1200HK 7.5 500 1200, 200015 500 1200, 2000750 1200, 20001000 1200, 2000Federal Pacific DST2 5 250 1200, 20007.5 500 1200, 200015 500 1200, 2000750 1200, 2000MOP 27 1000 1200McGraw Edison PSD 15 501 1200502 2000751 120013 SWITCHGEAR5-MSV (replacement forAllis-Chalmers MA)Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-31

13SWITCHGEARReplacement Breakers & Retrofit ProductsSafety Racking SolutionsSiemens GM Switchgear ElectricRacking AccessoryAn optional electric racking accessory isavailable for 5-15kV GM, GM-SG, and38kV GM38 switchgear. The switchgearrequires modifications to the front panelto add mounting adapters for the motordrive mechanism. The accessoryconsists of a motor drive enclosurewhich installs on mounting brackets onthe switchgear front panel of a circuitbreaker compartment. The unit includesa power cord, which can be connectedto a convenient power source in thevicinity of the switchgear. Instructionsfor mounting the racking accessory andfor racking of circuit breakers areprovided on a label on the rackingaccessory.Allis-Chalmers D and F Switchgear—Closed Door Racking ModificationIn order to improve operator safety,Siemens offers a field modification toconvert type D and F switchgear to aclosed-door, remote rack design. Thismodification provides a cost effectivesolution to keep operators clear of thearc flash zone during breaker racking.Allis-Chalmers and later Siemensmanufactured type D and F mediumvoltageswitchgear from 1958 throughthe late 1980’s. This gear utilized airmagneticbreakers that were typicallymanually racked via a lever while thecubicle panel door was open.The field modification consists of a floormountedscrew racking device and abreaker-mounted bracket to interfacewith the floor-mounted screw device.These additions allow end-users toeither have closed-door manual racking,or closed-door remote racking.The closed-door remote racking optionrequires the above mentioned cell andbreaker additions, as well as a minorfront panel modification to accept atorque-regulated motor. The motor canbe moved from one cell position to thenext, thus only one motor device isrequired.Figure 7 Motor drive mounted on CBcubicle door.Before: Original floor-mounted leverracking, commonly used on type D and Fswitchgear, required the operator to standin front of the breaker with the panel dooropen.Manuf. Model kV Ratings MVA AMPAllis-ChalmersD Gear MA 5 250 1200, 2000350 1200, 2000FA 5 350 3000F Gear FB 7 500 1200, 2000, 3000FC/FCV 15 500 1200, 2000750 1200, 20001000 1200, 2000, 3000Easily installed on existing units and can be provided for5kV, 7.5kV, and 15kV ratings, from 1200A through 3000A.GeneralFigure 8 Power and Control switch units.After: Following the field modification, thebreaker can be racked in and out while theoperator stands outside of the arc flashzone.For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.13-32Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Field ServicesStart-up Commissioning ServicesWe realize that, even though our TotallyIntegrated Automation® and TotallyIntegrated Power® products aredesigned for quick and easy installation,your schedule may not allow you toallocate the resources and personnelnecessary to get this equipment up andrunning when it is required.In today's business environment, staffmembers are frequently overloaded, orthey may be dedicated to other projects.Now, when you purchase newequipment from Siemens, you can addstartup services at special rates. This willgive you the additional help required tomeet even the most pressingdeadlines... at affordable rates. You canbe confident that we will arrive at yourdoor with the installation experiencenecessary to get your new generalpurpose drives, motor control center orswitchgear properly started up andworking when you need it.Factory-trained engineers will:▪ Startup your newly-purchasedSiemens equipment▪ Test for operational functionality▪ Provide a written report detailing testsand services▪ Advise your team on upkeep andmaintenance.In many cases, you will receive a oneyearparts warranty extension on yournew equipment such as:▪ Motor control centers▪ General purpose variable speed drives▪ Low voltage switchgear.Bonus:Receive an additional one-year partswarranty when you purchase Siemensstartup services with your new motorcontrol centers, general purpose variablespeed drives and/or low voltageswitchgear.Medium Voltage Switchgear StartupService▪ Inspect anchorage, alignment andgrounding▪ Check tightness of bolted bus joints▪ Measure and record critical distancessuch as contact gap▪ Perform mechanical operation tests onthe operating mechanism▪ Perform a contact resistance test onthe breaker vacuum contacts▪ Perform insulation resistance tests▪ Perform vacuum interrupter integrity(over-potential) tests▪ Perform insulation resistance test onall control wiring at 1000 volts DC▪ Verify trip, close, trip-free and antipumpfunctions▪ MoreLow Voltage Switchgear StartupService▪ Perform mechanical operational test▪ Check cell fit and element alignmentGeneral▪ Check tightness of connections▪ Lubricate as required▪ Perform a contact resistance test▪ Perform an insulation resistance testat 1000 volts DC from pole-to-pole andfrom each pole-to-ground with breakerclosed and across open contacts ofeach phase▪ Perform secondary current injectiontesting▪ MoreSwitchboards and Power SwitchingCenters▪ Inspect for physical damage andnameplate compliance with single linediagram▪ Perform mechanical operational test.(circuit breakers, switches, etc.)▪ Check cell fit and element alignment▪ Check tightness of connections andlubricate▪ Perform a contact resistance test onRL/WL/SB breakers and power switches▪ Perform an insulation resistance testat 1000 volts DC from pole-to-pole andfrom each pole-to-ground with breakeror switch closed and across opencontacts of each phase▪ Perform Secondary Current InjectionTesting (RL/WL/SB breakers)▪ More13 SWITCHGEARFor more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-33

13SWITCHGEARField ServicesStart-up Commissioning Services▪ Ensure incoming line powerconnections comply with UL/NECrequirements where applicable▪ Ensure that any special motor startingand running applications have beenconsidered when selecting motorstarter controls, and that mainmetering is functioning properly▪ Perform startup on drives, solid state/soft-start starters and other equipment▪ MoreGeneralafter installation and wiring (perdrawings)▪ Make final adjustments such as speedrange, acceleration/deceleration andtuning to motor▪ Check starting, stopping, interlockingand sequencing (per drawings)▪ Check and adjust for purchasedoptions such as bypass, braking, serialcommunications, encoder interface,and line filters▪ Verify power quality (MM440 unitsonly)▪ MoreMotor Control Center Startup Service▪ Ensure that all protective devices havebeen properly set and locked▪ Review power fuse selection andinstallation procedures▪ Conduct a general physical inspectionof MCC power and controlconnections. Check tightness ofconnectionsGeneral Purpose Variable SpeedDrives Startup Service▪ Inspect electrical and mechanical partsEngineer-by-the-Day for new equipment purchases*Minimum purchase required. Extended warrantynot vailable with Engineer-by-the-Day service.Now, you can take advantage of theexpertise of a Siemens factory-trainedengineer to startup your Siemens powerdistribution and control equipmentpurchases.Engineer-by-the-Day is available incomplete one-day increments for setupof the following products*:▪ ACCESS power monitoring▪ Busway▪▪▪▪▪▪▪▪Dry type transformersInsulated case circuit breakersMolded case circuit breakersPanelboardsSensitrip circuit breakersSwitchboardsSwitchesMoreSiemens Energy & Automation iscommitted to ensuring that yourequipment is up and running...when youneed it. Siemens Industrial Servicesprovides expert factoryauthorizedequipment startup at a special rate whenyou purchase the service before yourproduct is delivered.Get your equipment up and running ontime. Contact your local distributor orSiemens Energy & Automation salesoffice to learn more.13-34Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Field ServicesPower System StudiesGeneral/SelectionShort Circuit StudyPower system specialists from Siemenswill determine the maximum duty thatyour system’s protective devices,transformers, and interconnections willbe subjected to in the event of threephase and/or line-to-ground faultconditions. In addition, we will providebasic information required to establishprotective relay settings.Coordination StudyUnder fault conditions, systems shouldisolate the faulted area to minimizedisturbance to the remaining system,and simultaneously limit damage toequipment. We will review thecharacteristics of your protectivedevices, then provide the settingsnecessary to ensure that your systemfunctions optimally should a fault occur.Harmonic AnalysisAs AC drives have become increasinglyprevalent in industry, we have seen theintroduction of destructive harmonics tomany systems. The power qualityexperts from Siemens will determine theextent and severity of harmonics in yoursystem, then recommend theappropriate means of limiting potentialdamage.Transient Stability StudyThis study is particularly valuable forfacilities that generate their own power,and those with very large motors. Ourpower system specialists will study thetransient response of rotating equipmentfollowing system disturbances, andanalyze system behavior in relation tothe power company tie.Protective Device EvaluationWith the objective of achieving optimumprotection, we will perform thenecessary calculations required to selectthe interrupting rating of power fuses,circuit breakers, and other protectivedevices.Power Quality AssessmentWith the proliferation of sensitiveelectronic equipment in recent years,power quality has become a majorconcern for industry. We performstructured, step-by-step studies withtimely diagnosis and expert solutions tothe complex challenges of utility andend-user power quality issues.Arc Flash StudyNFPA 70E recommends that an ArcFlash Hazard Analysis be performed priorto work on electrical equipment.Siemens will determine the incidentenergy levels, Arc Flash Boundary (AFB),and required level of Personal ProtectiveEquipment (PPE).Load Flow StudyThis steady-state analysis of yoursystem’s capability to supply theconnected load will produce a listing ofreal and reactive power flow in each lineor branch, and the bus voltages, underboth normal and abnormal systemconditions.Voltage Unbalance StudyVoltage flicker and poor voltageregulation are a common concern onsystems with large arc furnaces. Theexperts from Siemens use this study todevelop comprehensive solutions thatlimit the effects of voltage irregularitiesand protect sensitive equipment.Grounding StudyWith the goal of ensuring properprotection and reducing the possibility ofexcessive transient overvoltages duringline-to-ground faults, our engineers willdetermine and recommend the mostappropriate form of system groundingprotection (including solidstate, lowresistance, and high resistance).With power system expertise andexperience that comes from real-worldsuccesses, the specialized team ofprofessional engineers and certifiedtechnicians from Siemens will help you:▪ Minimize downtime▪ Improve the safety of your operationsfor employees and sub-contractors▪ Optimize your system’s performance▪ Extend your equipment’s life cycle▪ Reallocate your valuable internalmaintenance resources to your corebusiness▪ Maximize the protection of sensitiveelectronics▪ Ensure your facility complies withapplicable safety regulationsIn addition, the power system specialistsfrom Siemens also provide the following:Power System Studies on“Equipment Release for Manufacture”▪ To ensure adequate interrupting rating,and to ensure that coordinationcapabilities are recognizedStreamlined Power SystemConstruction Studies (PSCS)▪ For devices being installed onconstruction projects13 SWITCHGEARFor more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-35

Field ServicesArc Flash StudyGeneralImplementingrecommendations from aSiemens Arc Flash HazardStudy can bring you thefollowing benefits:▪ Improve employee safety▪ Improve your electrical system▪ Provide safety information tosubcontractors13SWITCHGEARArc Flash HazardsIn the fraction of a second that it takescopper to expand to vapor, an arc flashcan generate skin-searing heat — fourtimes hotter than the surface of the sun.Recent revisions to NFPA70E requirethat an Arc Flash Hazard Analysis beperformed prior to working on or nearelectrical equipment containing exposedenergized conductors. The analysisdetermines the arc flash boundaries(AFB), incident energy levels and therequired level of personal protectiveequipment (PPE). The recommendationsin the analysis can be used to determinehazards in your workplace. Implementingthe recommendations will help protectyour workers and help you satisfy OSHArequirements.The Siemens solution tominimize risks from arc flashhazardsWorking within NFPA and IEEEguidelines, our experienced powersystems engineers will performsystematic and accurate Arc Flash HazardStudies as follows:1. Short Circuit CalculationsSiemens will either use your data, ormake calculations for you, to identifybolted and arcing fault levels at keypoints in a power distribution system.2. Protective Device CoordinationUsing the customer’s electricalsystems coordination study, Siemensdetermines the duration of the arcingfaults.3. Arc Flash Hazard CalculationsThe incident energy level, the flashhazard boundary, and the PPE requiredare then calculated for each location.4. DocumentationThe information above is compiled foryou into a comprehensive report,which contains information necessaryto comply with regulatoryrequirements.5. Unsafe Work LocationsThe report will identify work locationshaving incident energy levels in excessof available PPE ratings.6. Arc Flash Hazard MitigationRecommendations will be made tominimize Arc Flash Hazards bychanges in system protection oroperational procedures.7. Arc Flash Hazard LabelsIn addition to the report, our customerswill receive a field label containing theflash hazard boundary distance,incident energy level, PPE categoryand shock hazard for each location.▪ Assist in compliance with regulations▪ Provide you with documentation thatmay bring about reductions in workerscompensation and insurance ratesTurn to Siemens for Arc Flash HazardStudies, comprehensive safety trainingand other related services that willenhance the safety of your personneland the reliability of your operation.SARRACS — Complete arc flashprotection for switchgear racking.After completion of your Arc Flash HazardStudy and Equipment Labeling efforts,why not consider another aspect to yourpersonnel safety initiatives? Why notconsider Siemens’ SARRACS remotecircuit breaker racking system? Rackingmedium voltage circuit breakers (>1000V)into and out of a live bus is one instancewhere the PPE required may not beadequate to protect personnel from arcflash. Siemens SARRACS effectivelyremoves the operator from the arc flashboundary by allowing for remoteinstallation or removal. In addition,SARRACS provides torque monitoring todetect improper breaker connection.For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.13-36Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Secondary Unit SubstationsOverviewGeneralSiemens offers a wide variety of unitsubstation designs to meet customerrequirements. A unit substation consistsof one or more transformersmechanically and electrically connectedto and coordinated in design with one ormore switchgear or switchboardassemblies. A secondary unit substationis defined as a unit substation whoseoutgoing section is rated below 1000volts.A typical secondary unit substationconsists of three sections:▪ Primary: an incoming section thataccepts incoming high voltage (2400 to13,800 volts) line▪ Transformer: section that transformsincoming voltage down to utilizationvoltage (600 volts or less)▪ Secondary: an outgoing section thatdistributes power to outgoing feedersand provides protection for thesefeeders (600 volts and less)Standard secondary unit substationsconsist of:▪ Medium Voltage Primary▪ Transformer▪ Low Voltage SecondarySiemens also offers low voltage unitsubstations with:▪ Low Voltage Primary▪ Transformer▪ Low Voltage SecondaryThe primary reason for using a secondaryunit substation is to bring power as closeas possible to the center of the loads.Another reason is that it provides asystem design concept incorporating awide variety of components that permitstailoring equipment to the needs of theapplication. A secondary unit substationprovides▪ Reduced power losses▪ Better voltage regulation▪ Improved service continuity▪ Increased functional flexibility▪ Lower installation cost▪ Efficient space utilizationEvery component and assembly ofsecondary unit substations are designedand engineered as an integral part of acomplete system.Primary SwitchPrimary SwitchLiquid Filled TransformerDry Type TransformerSwitchboard with WL EncasedSystems BreakersType SB3 Switchboard withFusible Switches13 SWITCHGEARPrimary SwitchLiquid Filled TransformerType WL Low VoltageSwitchgearFor more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-37

Secondary Unit SubstationsTransformers — Dry TypeDimensions10.5 in.(266.7 mm)H + 3.25 in.(82.6 mm)DANGERFRONTFANCONTROLPANEL8.0 in.(203.2 mm)13SWITCHGEAR2.75 in.(69.85 mm)8.0 in.(203.2 mm)12.63 in.(320.8 mm)4.0 in. (101.6 mm)GROUNDBUSHigh VoltageTerminal1.81 in.(45.97 mm)Front ViewOutdoorW1.81 in.(45.97 mm)Table 23kVARating225300500750100015002000250030005kV and 15kV Ventilated Dry Type Transformers115˚C or 150˚C Temp Rise5 kV = 30 kV BIL,15 kV = 60 kV BILDim. in Inches (mm) Approx.weight—H W D Lbs. (kg)90(2286)90(2286)90(2286)90(2286)90(2286)90(2286)90(2286)102(2591)110(2794)48(1219)78(1981)78(1981)78(1981)78(1981)90(2286)90(2286)112(2845)120(3048)48(1219)48(1219)48 (1219)48 (1219)48 (1219)48 (1219)58(1473)58(1473)58(1473)2,200(998)2,500(1134)3,150(1429)4,150(1882)5,050(2291)6,700(3039)8,050(3652)13,000(5897)14,000(6350)80˚C Temp Rise5 kV = 30 kV BIL,15 kV = 60 kV BIL115˚C or 150˚C Temp Rise5 kV = 60 kV BIL,15 kV = 95 kV BILApprox.weight—Lbs. (kg)80˚C Temp Rise5 kV = 60 kV BIL,15 kV = 95 kV BILDim. in Inches (mm) Approx. Dim. in Inches (mm) Dim. in Inches (mm)weight—H W D Lbs. (kg) H W D H W D90(2286)90(2286)90(2286)90(2286)90(2286)90(2286)90(2286)102(2591)110(2794)48(1219)78(1981)78(1981)78(1981)78(1981)90(2286)102(2591)112(2845)120(3048)48(1219)48(1219)48 (1219)48 (1219)48 (1219)48 (1219)58(1473)58(1473)58(1473)2,500(1134)3,150(1429)4,150(1882)5,050(2291)6,550(2971)8,050(3652)13,000(5897)16,000(7258)18,000(8165)Approx.weight—Lbs. (kg)— — — — — — — —90(2286)90(2286)90(2286)90(2286)90(2286)90(2286)102(2591)110(2794)78(1981)78(1981)90(2286)90(2286)102(2591)112(2845)112(2845)120(3048)48(1219)48(1219)58(1473)58(1473)58(1473)58(1473)58(1473)58(1473)3,150(1429)4,150(1882)5,100(2313)6,600(2994)8,050(3652)13,000(5897)16,000(7258)18,000(8165)90(2286)90(2286)90(2286)90(2286)90(2286)102(2591)110(2794)110(2794)78(1981)78(1981)90(2286)102(2591)112(2845)112(2845)112(2845)120(3048)48(1219)48 (1219)58(1473)58(1473)58(1473)58(1473)58(1473)58(1473)3,300(1499)4,400(1996)5,500(2495)7,400(3357)14,000(6350)14,000(6350)16,000(7258)18,000(8165)Table 24 5kV and 15kV Cast Coil Type Transformers115˚C or 80˚C 5 kV = 75 kV BILkVARating50075010001500200025003000Dim. in Inches (mm)H90 (2286)90 (2286)90 (2286)90 (2286)102 (2591)108 (2743)114 (2896) 208V secondary requires 58 in. (1473 mm) deep enclosure.W90 (2286)96 (2438)102 (2591)108 (2743)114 (2896)120 (3048)126 (3200)115˚C or 80˚C Rise 15 kV = 95 kV BILDim. in Inches (mm)Weight inD Lbs. (kg) H W D58 (1473)58 (1473)58 (1473)58 (1473)58 (1473)58 (1473)58 (1473)5,200 (2359)6,900 (3130)8,400 (3810)11,200 (5080)13,200 (5988)15,300 (6940)18,200 (8256)90 (2286)90 (2286)90 (2286)96 (2438)102 (2591)108 (2743)114 (2896)90 (2286)96 (2438)96 (2438)102 (2591)114 (2896)120 (3048)126 (3200)58 (1473)58 (1473)58 (1473)58 (1473)58 (1473)58 (1473)58 (1473)Approx.Weight inLbs. (kg)5,400 (2449)7,200 (3266)8,500 (3856)12,900 (5851)13,900 (6305)15,900 (7212)18,900 (8573)13-38Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Secondary Unit SubstationsTransformers — Liquid Filled TypeDimensions5kV and 15kV Liquid-Filled TransformerTable 25 5kV and 15kV Silicone Liquid TransformerskVARating500750100015002000250065°C Temp. Rise55°C/65°C Temp. RiseDimensions in Inches (mm)WeightDimensions in Inches (mm)A B C D Lb. (kg) A B C D70.5 (1791) 59.5 (1511) 52.00 (1321) 21.50 (546) 4190 (1901) 70.5 (1791) 76.0 (1930) 52.00 (1321) 38.00 (965)72.5 (1842) 81.0 (2057) 53.00 (1346) 40.50 (1029) 6450 (2926) 72.5 (1842) 81.0 (2057) 53.00 (1346) 40.50 (1029)74.5 (1892) 75.0 (1905) 56.00 (1422) 40.50 (1029) 7630 (3461) 80.5 (2045) 81.0 (2057) 56.00 (1422) 40.50 (1029)79.5 (2019) 81.0 (2057) 59.00 (1499) 40.50 (1029) 9500 (4309) 80.5 (2045) 103.5 (2629) 59.00 (1499) 51.75 (1314)79.5 (2019) 102.5 (2604) 59.00 (1499) 53.25 (1353) 12070 (5475) 89.5 (2273) 122.5 (3112) 59.00 (1499) 61.25 (1556)79.5 (2019) 110.5 (2807) 59.00 (1499) 57.25 (1454) 14190 (6437) 89.5 (2273) 130.5 (3315) 59.00 (1499) 65.25 (1657)WeightLb. (kg)4390 (1991)6890 (3125)8350 (3788)11300 (5126)13920 (6314)15230 (6908)13 SWITCHGEARTable 265kV and 15kV Mineral Oil Filled Transformers65°C Temp. Rise55°C/65°C Temp. RisekVADimensions in Inches (mm)WeightDimensions in Inches (mm)Rating A B C D Lb. (kg) A B C D500 70.5 (1791) 53.5 (1359) 52.00 (1321) 21.5 (546) 4100 (1860) 70.5 (1791) 53.5 (1359) 52.00 (1321) 21.50 (546)750 70.5 (1791) 58.5 (1486) 53.00 (1346) 24.0 (610) 6200 (2812) 70.5 (1791) 75.0 (1905) 53.00 (1346) 40.50 (1029)1000 70.5 (1791) 64.5 (1638) 56.00 (1422) 24.0 (610) 7140 (3239) 70.5 (1791) 81.0 (2057) 56.00 (1422) 40.50 (1029)1500 72.5 (1842) 64.5 (1638) 59.00 (1499) 24.0 (610) 8800 (3992) 72.5 (1842) 81.0 (2057) 59.00 (1499) 40.50 (1029)2000 76.5 (1943) 78.0 (1981) 59.00 (1499) 36.0 (914) 10250 (4649) 76.5 (1943) 98.5 (2502) 59.00 (1499) 49.25 (1251)2500 76.5 (1943) 84.0 (2134) 59.00 (1499) 42.0 (1067) 13730 (6228) 76.5 (1943) 106.5 (2705) 59.00 (1499) 53.25 (1353)3000 76.5 (1943) 98.5 (2502) 70.00 (1778) 49.25 (1251)76.5 (1943) 106.5 (2705) 70.00 (1778) 53.25 (1353)3750 77.5 (1969) 108.5 (2756) 72.00 (1829) 54.25 (1378)77.5 (1969) 124.5 (3162) 72.00 (1829) 62.25 (1581) Consult Siemens for weight.WeightLb. (kg)4270 (1937)6420 (2912)7720 (3502)9550 (4332)10650 (4831)14250 (6464)Note: Dimensions and weights on this page are for estimating purposes only, not for construction.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-39

Secondary Unit SubstationsTransition SectionsA transition section is required betweenthe transformer and the primary section,and between the main device section ofthe switchboard for a liquid filledtransformer. Connection between thetransformer secondary and the main busof the switchboard is made with flexibleconnectors.General13SWITCHGEARTransition SectionFlexible Connectors Between Transformer Secondary and Main Bus of SwitchboardHigh Voltage TransitionSection Between PrimarySwitch and TransformerTable 27TransformerWidth inInches (mm) DepthOil, RTEmp, Silicone 20 (508) Ventilated Dry Type 20 (508) Outdoor Cast-Coil 20 (508) Same depth as primary switch section. Transition section is not required (optional).Low Voltage TransitionSection BetweenTransformer and LowVoltage SwitchboardTable 28Dimensions in Inches (mm)AmpRating60080010000120016002000250030004000Liquid FilledTransformerW20(508)20(508)20(508)D 20(508) 20(508)VentilatedDry Type andCast CoilTransformer W D20 (508) Same depth as primary switch section. Transition section is not required (optional).Switchboard secondary defines requirements.Consult Siemens for specific requirements.For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.13-40Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Secondary Unit Substations▪ Switchboard SecondaryNote: See Section 12 for Switchboard Secondaries▪ Switchgear SecondaryNote: See Pages 42-51 for WL Switchgear Secondary13 SWITCHGEARFor more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-41

13SWITCHGEARLow Voltage SwitchgearType WL Low Voltage Metal-Enclosed SwitchgearSiemens Type WL low voltagemetal-enclosed switchgear is designed,constructed and tested to providesuperior power distribution, powermonitoring and control. At the heart of theType WL low voltage switchgear is theWorld Class Siemens WL breaker.Siemens Type WL low voltage switchgearcan be utilized in the followingapplications:▪ Industrial▪ Institutional▪ Critical Power▪ Utility and co-generation▪ CommercialProduct Scope▪ Equipment ratings635VAC Maximum3-Phase 3-Wire,3-Phase 4-Wire50/60 Hz6000 amp maximum horizontal bus5000 amp maximum vertical bus▪ Enclosure optionsNEMA 1 IndoorNEMA 3R Outdoor Walk-inNEMA 3R Outdoor Non Walk-inExclusive FeaturesGenerator/Utility Protection Sets24/7/365 power availability is critical forsome systems. On-site generationcapability is growing more and morecommon in many systems. All of the WLdigital electronic trip units allow thesystem designer to precisely tailor tripsettings for the most demandingrequirements. However, the 755 and 776trip units allow one set of trip settings fora fully loaded utility feed and with asimple contact closure, the trip unittoggles to a second trip set tailored toprovide optimal generator protection. Thewide range of settings allows the WL toprovide protection for a minimalgenerator capacity for only essentialloads, through full backup for an entirefacility. This dual utility/generatorprotection capability in a single circuitbreaker allows the system designerunparalleled, costeffective flexibility.Type WL Low Voltage Metal-Enclosed SwitchgearExtended Instantaneous Protection(EIP – Patent Pending Feature)Another unique feature of the WL TripUnit, allows the system designer toachieve full selective trip coordination upto the short-time rating of the frame,while also allowing application of thebreaker up to the interrupting rating ofthe frame. EIP allows the WL breaker tobe applied up to the full withstand ratingof the breaker, for complete coordination,with a minus 0% short- time bandtolerance up to 85kA on Frame Size IIand 100kA on Frame Size III. Above faultcurrents of 20% higher than the fullshort-time rating, the WL breaker is selfprotecting, and the EIP function will tripthe breaker instantly to protect the frameand the system from these extremelyhigh currents, as high as 150 kA onFrame Size III. One added benefit is thatarc flash energy is greatly reduced in thishigh current region due to theinstantaneous trip response that EIPprovides.GeneralIndustry StandardsType WL switchgear with power circuitbreakers are designed, tested andconstructed in accordance with:▪ UL 1558—Metal-Enclosed Low VoltagePower Circuit Breaker Switchgear▪ ANSI C37.20.1—Metal-Enclosed LowVoltage Power Circuit BreakerSwitchgearWL drawout circuit breakers are designedfor continuous operation at 100% of theircurrent rating without the need forexternal heat sinks, and are in accordancewith:▪ UL 1066—Low Voltage AC and DCPower Circuit Breakers Used inEnclosures▪ ANSI C37.13—Low Voltage AC PowerCircuit Breakers Used in EnclosuresFor more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.13-42Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Low Voltage SwitchgearType WL Low Voltage Metal-Enclosed SwitchgearWL Low Voltage Metal-Enclosed Switchgear Features & Benefits▪ Control and communication termination area located in frontof equipment and segregated from power cable terminationarea that is located in rear of equipment▪ Front accessible vertical and horizontal wiring channels▪ Easy access to control and communication connectionsthrough separate front door▪ No heat sinks on breaker or bus▪ No front-breaker door ventilation▪ 100kA bus bracing standard - 150kA and 200kA optional▪ Insulated/isolated bus through 6000 amps▪ Three levels of horizontal bus through 5000 amps▪ Modular design for maximum configuration flexibilityBreaker RatingsSpecifications▪ Breaker racking handle integral to the breaker▪ All breaker settings and displays clearly visible with breakerdoor closed▪ Field installable “drop in place” accessories and trip units▪ Same accessories work for entire breaker line▪ ModBus, ProfiBus and Ethernet communication▪ Field installable ground fault protection and zone selectiveinterlock▪ Rogowski coil current sensors provide high metering accuracyand prevent saturation at high current levels▪ Dynamic Arc Flash Sentry (DAS) and EIP (ExtendedInstantaneous Protection) are patent pending features fromSiemens that greatly reduce Arc Flash EnergyFrame Size IIFrame Rating 800 1600 2000 3200Rating Designation N S H L F N S H L F S H L F S H LInterrupting Current I cs 254VAC 50 65 85 100 200 50 65 85 100 200 65 85 100 200 65 85 100(kAIR RMS) 50/60 Hz 508VAC 50 65 85 100 200 50 65 85 100 200 65 85 100 200 65 85 100635VAC 50 65 65 85 200 50 65 65 85 200 65 65 85 200 65 65 85Short-time Withstand13 SWITCHGEARCurrent l cw(kA RMS) 50/60 Hz 0.5s 50 65 65 85 20 50 65 65 85 20 65 65 85 20 65 65 85Extended Instantaneous 285-Protection 508VAC 50 65 85 100 200 50 65 85 100 200 65 85 100 200 65 85 100(kA RMS - 0% to 20+%) 635VAC 50 65 65 85 200 50 65 65 85 200 65 65 85 200 65 65 85Close & Latch Ratings(kA RMS) 50/60 Hz 50 65 65 85 75 50 65 65 85 75 65 65 85 75 65 65 85Rating Plug Range 200A to 800A 200A to 1600A 200A to 2000A 200A to 3200AEndurance Rating(switching operations Mech. 15,000 15,000 15,000 15,000with maintenance) Elec. 15,000 15,000 15,000 15,000Frame Size IIIFrame Rating 3200 4000 5000Rating Designation M F H L M F H L M FInterrupting Current I cs 254VAC 150 200 85 100 150 200 85 100 150 200(kAIR RMS) 50/60 Hz 508VAC 150 200 85 100 150 200 85 100 150 200635VAC 85 200 85 85 85 200 85 85 85 200Short-time WithstandCurrent l cw(kA RMS) 50/60 Hz 0.5s 100 40 85 100 100 40 85 100 100 40Extended Instantaneous 254VACProtection 508VAC 150 200 85 100 150 200 85 100 150 200(kA RMS - 0% to 20+%) 635VAC 85 200 85 85 85 200 85 85 85 200Close & Latch Ratings(kA RMS) 50/60 Hz 100 40 85 100 100 40 85 100 100 40Rating Plug Range 800A to 3200A 800A to 4000A 800A to 5000AEndurance Rating(switching operations Mech. 10,000 10,000 10,000with maintenance) Elec. 10,000 10,000 10,000Maintenance means: Replacing main contacts and arc chutes (see operating instructions).Main contacts in breakers with Rating Designation M can only be replaced by Siemenspersonnel.Do not apply breaker at 635V AC on a system with available fault current > 85kA RMS.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-43

13SWITCHGEARLow Voltage SwitchgearType WL Low Voltage Metal-Enclosed SwitchgearMain and Ground BusThe standard main bus is silver-platedcopper. Tin-plated copper bus is optionallyavailable. Vertical and horizontalbus bar utilize a channel shape designto maximize short circuit withstandcapability and minimize heat rise. Allbus joints include Grade 5 bolts andconical spring washers. Provisionsfor future extension of the main businclude plated joints and high tensilestrength steel hardware.The main three phase horizontal busis arranged vertically one phase abovethe other with edge-to-edge alignmentto provide high, short circuit strength.Insulated main bus with isolated verticalbus is optional.Vertical bus ratings available are 1600,2000, 3200, 4000 and 5000 amperescontinuous current. Horizontal busratings available are 1600, 2000, 3200,4000, 5000 and 6000 amperes. A neutralbus is furnished when specified, and canbe rated 1600, 2000, 3200, 4000, 5000or 6000 amperes continuous current.Control and Communication WiringStandard control and communicationwiring is #14 AWG extra-flexible, strandedcopper type SIS. Terminations are madewith compression-type, insulatedterminals. Control and communicationwiring is installed and accessed from thefront of the switchgear structure. Eachbreaker compartment has a dedicatedhorizontal and vertical wireway.For devices not having screw-typeterminals, pressure terminals are used.InsulationThe insulation used is a UL recognizedthermoset material that has excellent heatresistance, flame retardance, dimensionalstability and low moisture absorption.12GeneralCircuit Breaker CompartmentsTypical circuit breaker compartmentsinclude primary disconnects, drawoutrails, secondary disconnects, verticalwireway, horizontal wireway and, ifapplicable, TOC switch operator, MOCswitch operator and associated interlocks.Drawout rails allow the breakerto be withdrawn from the compartmentwithout additional extensions or adapters.Up to six (2 sets of three) currenttransformers for metering or relaying canbe mounted in each compartment.A separate secondary disconnect accessdoor that is supplied with each breakercan be used to mount a variety of auxiliarydevices such as breaker control switches,indicating lights and pushbuttons.34A standard copper ground bus extendsthrough all sections. Cable lugs aremounted to the ground bus in eachsection.Standard short-circuit withstand (4 cycle)and short-time withstand (60 cycle) busbracing is 100,000 amperes. Higher shortcircuitwithstand bus bracings (150kA and200kA) are available.Load side runbacks for feeder circuitsare copper construction, are insulatedwith sleeve tubing in the main bus area,and are supported by high-strengthbus bracing.5671234TOC Switch OperatorBreaker Compartment Rear BarrierSecondary DisconnectVertical Wireway567Interference InterlockDrawout RailsPrimary DisconnectCircuit Breaker Cell InteriorFor more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.13-44Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Low Voltage SwitchgearType WL Low Voltage Metal-Enclosed SwitchgearOptionsSiemens High Resistance GroundingSystem(1) The HRG section can be 22" or 32"wide. The HRG instrumentcompartment is 45" high and either19" or 24" deep depending onwhether the circuit breakers are fused.The HRG instrument compartmentwill house all of the high resistancegrounding system components eitheron the door or in the device bucketexcept for the grounding resistors.(2) The grounding resistor assembly willmount in the rear cable compartmentof the switchgear on the runbacksupport posts. It will typically mountbehind the HRG instrumentcompartment where it cannotinterfere with feeder breakerrunbacks.(3) In a typical Siemens HRG applicationwith a close coupled main breakersection, a general purpose instrumentcompartment takes up the Acompartment, the main breaker goesin the B compartment and the HRGinstrument compartment takes up theC & D compartments. An alternateHRG main breaker section can havethe HRG instrument compartment inthe A & B compartments, mainbreaker in the C compartment and ageneral instrument compartment inthe D compartment.Switchgear Mounted HoistThe integrally mounted hoist, standardon walk-in outdoor and optional onindoor switchgear enclosures, travelsalong rails on top of the switchgear toassist in breaker handling.TOC and MOC SwitchesThe Truck Operated Cell (TOC) Switchprovides interlocking control or remoteindication of the breaker rackingposition. The cubicle mounted auxiliaryswitch or Mechanism Operated Cell(MOC) switch provides interlockingcontrol or remote indication based onthe main contact position (open orclosed).ShuttersThese provide protection against accidentalcontact with primary disconnectsin a compartment when the breaker isremoved. Shutters automatically closewhen the breaker is withdrawn and arepadlockable and field installable.Key InterlockThis provides a mechanical means foroperating circuit breakers and otherdevices only when predescribed conditionsare met.Test SetA portable breaker test set is available asan option and supports testing the fullrange of functions and protectivesettings supplied with the breaker tripunit.Metering and Auxiliary CompartmentsCompartments are available to housedevices such as voltage transformers,metering, control power transformers,and supervisory devices.Instrument and Control TransformersVoltage transformers and control powertransformers are mounted in auxiliarycompartments. These transformersare protected by primary pull-out typecurrent-limiting fuses and secondaryfuses. Current transformers are normallymounted on the compartment primarydisconnect studs where they are readilyaccessible.Miscellaneous▪ Each switchgear lineup includes abreaker lifting device that is adjustablefor use with Size II and Size IIIbreakers▪ An optional portable breaker hoist isavailable if the integrated breaker hoistand track is not specified▪ A test cabinet is also available as anoption. The test cabinet is wall mountednecessary equipment for testingelectrically-operated breakers thathave been removed from the breakercompartment. The test cabinet doesn'tinclude or replace a breaker trip unittester▪ 4" high formed steel channel sillsare available for indoor switchgearenclosuresOutdoor SwitchgearType WL switchgear is available in twooutdoor (NEMA 3R) enclosures. Walk-inand non walk-in versions are availableto meet your particular application.For protection from snow, rain andother foreign matter, both outdoorenclosures rest on a six-inch high,formed steel base which providesrigid support and a tight bottomseal. A heavy duty protective undercoatingis applied to the undersideof all outdoor enclosures to protectagainst moisture and corrosion.Shielded ventilation housings permitproper air circulation while excludingdirt and foreign matter.In the walk-in outdoor enclosure alighted, unobstructed service aisle isprovided at the front of the switchgearallowing inspection and maintenanceGeneralwithout exposure to the elements.An access door equipped with anemergency bar release is located ateach end of the aisle.The following features are standardwith walk-in outdoor enclosures.(1) Space heaters in breaker compartmentand bus compartment.(2) Screens and filters for exteriordoor ventilation louvers.(3) Incandescent lighting receptaclewith three-way switch at each aisleaccess door.(4) Duplex receptacle with ground faultprotection at each aisle access door.(5) Load center for power distributionto lights, receptacles, switches andheaters.For non walk-in outdoor enclosures,space heaters and screens/filters forventilation louvering are standardwith lighting, receptacles, switchesand load centers offered as options.Side ViewRear View13 SWITCHGEARSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-45

Low Voltage SwitchgearType WL Low Voltage Metal-Enclosed SwitchgearDimensionsIndoor Front Elevation ViewIndoor Floor Plan and Cable Space Details1.25(32)typ..86(22)4.42 (112).75 (19) typ..75 (19) typ.1.50(38).86(22)5.86(149) 7.88 (200)4.82(122)B13SWITCHGEARATransformerThroatLiquid filled &outdoor dry typetransformers onlyC L14.9(378)Maximum availablespace in top or bottomof unit for customer'spower cables(4) Holes for.50 (12mm)Grade 5anchor boltsSpace forsecondaryleads fromabove2.00 (51)5.00(127)4.00(102)4.00(102) 1.00(25)2.12(54)3.00 (76)End Trim Panel (typ.)Required on left andright end of switchgearlineup — adds 2”to total lineup widthDSpace forsecondaryleads frombelow7.00(179)C2.37 (60)4.40 (112)1.00 (25)W1.00 (25)2.00 (51)W = 22 (559) or 32 (813)A Equipment DepthDirection of Cables B C D60" Non-Fused with(N, S, H or L-Rating Breakers)Below21.50 (546) 13.88 (353) 32.59 (828)OR65" Fused with (F-Rating Breakers)Above 21.25 (540) 18.88 (480) 37.59 (955)70" Non-fused with(N, S, H or L-Rating Breakers)Below 31.50 (800) 13.88 (353) 32.59 (828)OR75" Fused with (F-Rating Breakers) Above 31.25 (794) 18.88 (480) 37.59 (955)80" Non-fused with Below 41.50 (1054) (N, S, H or L-Rating Breakers) Above 41.25 (1048) 13.88 (353) 32.59 (828)80" Fused with Below 36.50 (927) (F-Rating Breakers) Above 36.25 (921) 18.88 (480) 37.59 (955)Note: Dimensions shown in inches and (mm). Reduce by 7.88" if upper neutral is present with cables above or if a lower neutral is present with cables below. Reduce by 4.00" if an 800-3200A breaker is located in the bottom compartment.Reductions per notes 1 & 2 are additive. Example: cables below + lower neutral + 2000A breaker in bottom compartment = B-11.88. Reduce cable space by 4.00" x 4.82" if Neutral Riser is present. (Consult Factory). 4.10 (104) if W=22; 4.60 (117) if W=32.For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.13-46Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Low Voltage SwitchgearType WL Low Voltage Metal-Enclosed SwitchgearSelectionGeneral Notes:▪ A blank/instrument compartment can always besubstituted for a breaker compartment▪ Any 22" wide section can be 32" wide if moreconduit working room is needed▪ For bus duct connections – if incoming is top,Compartment A must be blank/instrument, ifincoming is bottom, Com-partment D must beblank/instrument▪ Bused transition section is 22" wide▪ For close coupled transformer connections,Compartment A must be blank/instrument▪ Utility metering is always in a separatesection. Section width is dependent on utilityNote 1 – If a 4000 amp feeder breaker is installedin Compartment C, Compartment D must be aBlank or Instrument Compartment.Note 2 – If a 4000 amp breaker is installed inCompartment B, Compartment A must be a Blankor Instrument Compartment.Note 3 – Contact factory for applicationguidelines related to this design.Note 4 – If a 3200 amp breaker is installed inCompartment B, the middle level through bus isnot available.Note 5 – If a 3200 amp breaker is installed inCompartment D, the lower level through bus isnot available.Note 6 – If incoming is bottom, feeder breakerscan mount in compartments A and/or B.Note 7 – If a 3200 amp breaker is installed inCompartment B, Feeder Breaker in CompartmentA is limited to 1600 amp.Note 8 – If a 3200 amp breaker is inCompartment BC, the maximum breaker inCompartment A is 1600 amp and if a 4000 ampbreaker is in Compartment BC, the maximumbreaker in Compartment A is 800 amp.Section Compartment ArrangementACompartmentBCompartmentCCompartmentDCompartmentMain Sections – Non-Fused BreakersBlank orInstrumentCompartmentMain Breaker800, 1600,2000, 3200Feeder Breaker800, 1600,2000, 3200Feeder Breaker800, 1600,200022 in.(559 mm)Feeder Breaker800, 1600,2000Feeder Breaker800, 1600,2000, 3200Main Breaker800, 1600,2000, 3200Blank orInstrumentCompartment22 in.(559 mm)Blank orInstrumentCompartmentBlank orInstrumentCompartmentMain Breaker800, 1600,2000, 3200Feeder Breaker800, 1600,200022 in.(559 mm)Blank orInstrumentCompartmentMain Breaker4000, 5000Feeder Breaker800, 1600, 2000,3200, 4000Refer to Note 1Feeder Breaker800, 1600, 2000Refer to Note 132 in.(813 mm)Blank orInstrumentCompartmentBlank orInstrumentCompartmentMain Breaker4000, 5000Refer to Note 6Feeder Breaker800, 1600, 200032 in.(813 mm)13 SWITCHGEARSwitchgear Depth Dimensional Information(Dimensions below are for internal frames – nottotal structure depth)▪ Non-fused indoor – 60" standard, 70" and 80"optional▪ Fused indoor – 65" standard, 75" and 80"optional▪ Non-fused non-walk-in outdoor – 60" standardand 75" optional▪ Fused non-walk-in outdoor – 65" standard and75" optional▪ Non-fused walk-in outdoor – 60" standard and75" optional▪ Fused walk-in outdoor – 65" standard and 75"optional▪ Walk-in outdoor aisle is 42" deep▪ Sections with cable connected main, tie and/orfeeder breakers that are 3200 amp or greatermust be minimum depth of 70" for unfusedbreakers and 75" for fused breakers.Main Sections – Fused BreakersBlank orInstrumentCompartmentMain Breaker800, 1600,2000Feeder Breaker800, 1600,2000Feeder Breaker800, 1600,200022 in.(559 mm)Blank orInstrumentCompartmentBlank orInstrumentCompartmentMain Breaker800, 1600,2000Feeder Breaker800, 1600,200022 in.(559 mm)Blank orInstrumentCompartmentMain Breaker3200, 4000Feeder Breaker800, 1600, 200032 in.(813 mm)Blank orInstrumentCompartmentMain Breaker500032 in.(813 mm)For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-47

Low Voltage SwitchgearType WL Low Voltage Metal-Enclosed SwitchgearTie Sections – Non-Fused BreakersTie Sections – Fused BreakersSelectionFeeder Breaker800, 1600,2000Refer to Note 7Feeder Breaker800, 1600,2000Feeder Breaker800, 1600, 2000Feeder Breaker800, 1600, 2000Refer to Note 2Feeder Breaker800, 1600,2000Feeder Breaker800, 1600,2000Feeder Breaker800, 1600Refer to Note 8Blank orInstrumentCompartmentTie Breaker800, 1600,2000, 3200Feeder Breaker800, 1600,2000, 3200Feeder Breaker800, 1600,2000Tie Breaker800, 1600,2000, 3200Tie Breaker4000Feeder Breaker800, 1600, 2000,3200, 4000Refer to Note 1Feeder Breaker800, 1600, 2000,3200, 4000Refer to Note 2and Note 4Tie Breaker4000, 5000Tie Breaker800, 1600,2000Feeder Breaker800, 1600,2000Feeder Breaker800, 1600,2000Tie Breaker800, 1600,2000Tie Breaker3200, 4000Tie Breaker500013Feeder Breaker800, 1600,200022 in.(559 mm)Feeder Breaker800, 1600,200022 in.(559 mm)Feeder Breaker800, 1600, 2000Refer to Note 132 in.(813 mm)Feeder Breaker800, 1600, 200032 in.(813 mm)Feeder Breaker800, 1600,200022 in.(559 mm)Feeder Breaker800, 1600,200022 in.(559 mm)Feeder Breaker800, 1600,200032 in.(813 mm)32 in.(813 mm)SWITCHGEARMain and Tie Sections – Non-Fused BreakersMain and Tie Sections – Fused BreakersBlank orInstrumentCompartmentFeeder Breaker800, 1600,2000Refer to Note 7Blank orInstrumentCompartmentFeeder Breaker800Feeder Breaker800Feeder Breaker800, 1600,2000Feeder Breaker800, 1600,2000Main Breaker800, 1600,2000, 3200Tie Breaker800, 1600,2000, 3200Main Breaker800, 1600,2000Main Breaker4000Tie Breaker4000Main Breaker800, 1600,2000Tie Breaker800, 1600,2000Tie Breaker800, 1600,2000, 3200Main Breaker800, 1600,2000, 3200Tie Breaker800, 1600,2000Tie Breaker4000Main Breaker4000Tie Breaker800, 1600,2000Main Breaker800, 1600,2000Feeder Breaker800, 1600,2000Feeder Breaker800, 1600,2000Main Breaker800, 1600,2000Feeder Breaker800, 1600,2000Feeder Breaker800, 1600,2000Feeder Breaker800, 1600,2000Feeder Breaker800, 1600,200022 in.(559 mm)22 in.(559 mm)22 in.(559 mm)32 in.(813 mm)32 in.(813 mm)22 in.(559 mm)22 in.(559 mm)Feeder Sections – Non-Fused BreakersFeeder Sections – Fused BreakersFeeder Breaker800, 1600,2000Feeder Breaker800, 1600,2000Blank orInstrumentCompartmentBlankFeeder Breaker800, 1600,2000Feeder Breaker800, 1600Blank orInstrumentCompartmentBlank orInstrumentCompartmentFeeder Breaker800, 1600,2000, 3200Refer to Note 4Feeder Breaker800, 1600,2000, 3200Feeder Breaker800, 1600,2000Feeder Breaker4000, 5000Feeder Breaker4000, 5000Feeder Breaker4000Feeder Breaker4000, 5000Feeder Breaker800, 1600,2000, 3200Feeder Breaker800, 1600,2000Feeder Breaker800, 1600,2000Feeder Breaker3200Feeder Breaker4000Feeder Breaker5000Feeder Breaker800, 1600,2000, 3200Refer to Note 522 in.(559 mm)Blank orInstrumentCompartment32 in.(813 mm)Blank orInstrumentCompartment32 in.(813 mm)Feeder Breaker800, 1600,2000, 3200Refer to Note 532 in.(813 mm)Feeder Breaker800, 1600,200022 in.(559 mm)Feeder Breaker800, 1600,200032 in.(813 mm)Feeder Breaker800, 1600,200032 in.(813 mm)32 in.(813 mm)For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.13-48Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Low Voltage SwitchgearType WL Circuit BreakersRogowski Coil CT TechnologyA Rogowski coil is an ‘air-core’ toroidalcoil placed round the conductor. Thealternating magnetic field produced bythe current induces a voltage in the coilwhich is proportional to the rate ofchange of current.The direct output from the coil is givenby Vout=M dI/dt Where M is the mutualinductance of the coil and dI/dt is therate of change of current. To completethe transducer the voltage is integratedelectronically so that the output from theintegrator is a voltage that accuratelyreproduces the current waveform.Coil and Integrator:The combination of a coil and anintegrator provides an exceptionallyversatile current-measuring systemwhich can be designed to accommodatea vast range of frequencies, currentlevels and conductor sizes. The output isindependent of frequency, has anaccurate phase response and canmeasure complex current waveformsand transients.Linearity:One of the most important properties ofa Rogowski coil measuring system isthat it is inherently linear. The coilcontains no saturable components andthe output increases linearly inproportion to current right up to theoperating limit determined by voltagebreakdown. The integrator is alsoinherently linear up to the point wherethe electronics saturates. Linearitymakes Rogowski coils easy to calibratebecause a transducer can be calibratedat any convenient current level and thecalibration will be accurate for allcurrents including very large ones. Also,because of their linearity, thetransducers have a very wide dynamicrange and an excellent transientresponse.Coil WindingWith a Rogowski coil it is important toensure that the winding is as uniform aspossible. A non-uniform winding makesthe coil susceptible to magnetic pickupfrom adjacent conductors or othersources of magnetic fields. We havedeveloped special machines for makingaccurate windings. Coils come in a rangeof styles including rigid and flexible coilsbut we have developed several othervariations to meet specific needs.Output IndicationThe output from the integrator can beused with any form of electronicindicating device that has an inputimpedance greater than about 10kohmsuch as a voltmeter, oscilloscope,transient recorder or protection system.Split CoilsSome designs of coil can be fitted onthe conductor without the need todisconnect the conductor. Most flexiblecoils can be fitted this way and it is alsopossible to build split rigid coils. Splitiron-cored devices such as currenttransformers are subject to appreciableamplitude and phase errors if the halvesare misaligned by even a small amount.Rogowski coils do not have thisproblem. Misalignment of the joiningfaces of a split Rogowski coil has only asmall effect on the amplitude and noeffect on the phase.Electronic Trip UnitSelection Criteria for WL CircuitBreakersThe basic criteria for selecting circuitbreakers is:Maximum Available Short Circuit at theinstallation point. This value determinesthe short circuit current interruptingGeneralrating or short circuit current withstandrating of the circuit breaker.Rated Current In which is to flowthrough the respective circuit breakercontinuously. This value may not begreater than the maximum rated currentof the circuit breaker. The rated currentfor the WL is determined by the ratingplug, up to the maximum frame rating.Ambient Temperature of the circuitbreaker. This is usually the temperatureinside the cubicle.Design of the circuit breaker.Protective Functions of the circuitbreaker.These are determined by theselection of the appropriate trip unit.Dynamic Arc-Flash Sentry (PatentPending) A unique feature of the WL tripunit allows the system designer toachieve lower levels of arc flash energyand delayed tripping for selective tripcoordination purposes.Rating PlugThe Rating Plug is a replaceable modulethat enables users to reduce the rateddevice current for optimum adaptation tothe system; e.g., during startup of a plantsection. The Rating Plug should beselected so that it corresponds to therated current of the system.Switch-selectable I2t or I4t CharacteristicCurve Improved Overload Protection.The best possible protection is assuredwhen all protective devices in the systemare optimally coordinated. To achieveoptimum selectivity and coordination, thelong-time characteristic can be switchedbetween l2t and l4t, to improvecoordination with fuses or inverse relays.Switchable Parameter SetsTo allow the protection to adapt tochanges in system needs such asswitching between utility and generatorfeeds, WL Circuit Breakers support ETUswith two independent parameter sets.Switching between the parameter setsoccurs in less than 100 ms and can bedone remotely or via a contact input to anoptional CubicleBUS module.13 SWITCHGEARFor more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 13-49

Low Voltage SwitchgearType WL Circuit BreakersTrip Unit FunctionsSelectionSWITCHGEAR13Basic Protective Functions ETU725 ETU727 ETU745 ETU748 ETU755 ETU776Long-time overcurrent protection L Short-time delayed overcurrent protection S Instantaneous overcurrent protection I -- Neutral protection N -- Ground fault protection G -- Additional FunctionsSelectable neutral protection -- Defeatable short-time delay -- -- Defeatable instantaneous protection -- -- -- Selectable thermal memory -- -- Zone selective interlocking -- -- Selectable I 2 t or fixed short-time delay -- -- Adjustable instantaneous pick-up -- -- Selectable I 2 t or I 4 t long-time delay -- -- Adjustable short-time delay and pick-up Selectable and adjustable neutral protection -- -- Dual protective setting capability (DAS)* -- -- -- -- Extended instantaneous protection Parameterization and DisplaysParameterization by rotary switches (10 steps) -- --Parameterization by communication (absolute values) -- -- -- Parameterization by menu/keypad (absolute values) -- -- -- -- -- Remote parameterization of the basic functions -- -- -- -- Remote parameterization of the additional functions -- -- -- -- Alphanumeric LCD -- -- -- --Graphical LCD -- -- -- -- -- Metering FunctionMetering function Plus -- -- CommunicationCubicleBUS -- -- Communication via PROFIBUS-DP -- -- Communication via the MODBUS -- -- Communication via the Ethernet (BDA) -- -- standard -- not available optional* DAS- Dynamic Arc Flash Sentry, Siemens patent pending protective feature Fixed short-time delay onlyFor more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.13-50 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Low Voltage SwitchgearType WL Circuit BreakersWL Communication OverviewConnection DiagramGeneral1 Breaker Data Adapter(BDA)13 132 Browser-capable inputand output device(e.g. notebook)WinPM.NetServerWinPM.NetWeb ClientEthernet /Internet /Intranet3 WL Circuit Breaker4 COM16 MODBUSmodule or COM 15PROFIBUS moduleEthernet135 Breaker Status Sensor(BSS)6 Electronic Trip Unit7 Metering function PLUS8 Zone SelectiveInterlocking (ZSI) moduleMODBUS MasterPLC or SupervisorySoftware9510 Meter*(Ethernet Gateway)14OptionalMODBUS8 9 10 111215BDA Plus*SWITCHGEAR9 Digital output modulewith relay or optocoupleroutputs10 Digital output modulewith relay or optocoupleroutputs, remotelyconfigurable11 Analog output module12 Digital input module245163BDA7WL Circuit Breakerwith COM 16* The Siemens BDA Plus or meters, 9330, 9350, 95/9610 canbe used as a gateway to enable Ethernet communicationto the WL Circuit Breaker.13 WinPM.Net on PC14 PLC (e.g. SIMATIC S7)15 BDA PlusFeatures▪ Industry standard MODBUS orPROFIBUS communication available onall WL breakers from 200A to 5000A▪ The high modularity of the WL CircuitBreakers and accessories allows simpleretrofitting of all communicationcomponents▪ The ability to connect additional inputand output modules to the breakerinternalCubicleBUS of the WL opens upa range of opportunities to reduceecondary device count and wiring andto increase functionality implementedin switchgear▪ Innovative software products for localconfiguration, operation, monitoringand diagnostics of WL Circuit Breakersusing MODBUS, PROFIBUS or viaEthernet/Intranet/Internet▪ Complete integration of WL CircuitBreakers in all Totally Integrated Powerand Totally Integrated AutomationSolutionsMetering Function/Metering FunctionPLUSThe integrated metering function can beinstalled on all ETU745, ETU748,ETU755, and ETU776 trip units andprovides a viable alternative to externalmulti-function measuring instruments inmany applications.Metering Function can measure thefollowing:▪ Currents▪ Voltages▪ Power▪ Energy▪ Power Factor▪ FrequencyAll metered quantities are delivered asreal time values with min/maxrecording. The metering module alsocontains additional alarm setpoint andprotective relay functions (e.g. trip onoverfrequency or undervoltage, andalarm on reverse power or over amperedemand).The Metering Function PLUS has twoadditional wave form buffers andsupports harmonic analysis. With thetwo independent wave form buffers, thecurrent and voltage waveforms can berecorded, and allows detailed diagnostictriggering on events.If the Metering Function /MeteringFunction PLUS is ordered together withthe circuit breaker, it is already installedand ready for operation. As a retrofitpart, the metering function is simplyattached to the ETU and connected tothe CubicleBUS.For more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog13-51

Low Voltage SwitchgearArc Flash SolutionsFunction DescriptionMode of operationEScGeneralobjects can be detected at a range of 15m, for example, to output a warningmessage (however, this is not safetyrelated).Flexibility already on boardReflectionSF 3 SF 1 SF 4SF 2SWITCHGEAR13Dynamic Arc Flash Sentry (DAS)Laser Scanner SensorSIGUARD laser scanners are opticaldistance sensors which detect anymotion in a 190° working zone. Bytransmitting safe laser pulses and thenevaluating every reflected pulse, theyhave everything safely in view. Andwhen potentially hazardous situations doarise, they respond quickly and reliably.They can be simply programmed usingeither a PC or a laptop which means thatthey can be quickly and flexibly adaptedto new requirements.Unified, integrated communications viastandard fieldbuses can be implementedin a fail-safe fashion by transmittingsafety-related and standard datatogether. This means that also with ourSIGUARD laser scanners, you can enjoythe benefits of having just one buscoupling.SIGUARD laser scanners LS4 – theadvantages at a glance:▪ Hazardous areas can be contactlesslyand reliably secured with deviceswhich can be universally used: onmachines, production robots, conveyorsystems, vehicles etc.▪ Standard versions with fail-safesemiconductor outputs▪ Safe direct connection to AS-InterfaceSafety at Work▪ User-friendly version with PROFIBUSPROFIsafe connection▪ When scanners are replaced,parameters are automaticallytransferred via PROFIBUS▪ Category 3 according to EN 954-1▪ Up to 4 personnel protective and warningfield pairs which can be freely set▪ Protective field with max. 4 m radiusfor personnel safety▪ Extremely compact design▪ Low current drain (approx. 300 mA)The SIGUARD laser scanner LS4 is ascanner which optically andcontactlessly scans areas – and which ispredominantly used for personnelprotection. The laser scanner generatesa continuous train of bundled lightpulses using a laser diode and an opticalsystem. An integrated rotating mirrordistributes these light pulses over thecomplete working area. If objects orpersons enter this field, then thescanner evaluates the reflected lightpulses and, using the light propagationtime, continually calculates the preciseposition coordinates. If the definedpersonnel protective field is violated,then it brings the machine to animmediate stop.– 5°The operating range of SIGUARD laserscanners LS4 extends over 190° and issubdivided into angular segments of0.36°. The scanning rate is 25 scans persecond which means that a light pulse istransmitted every 40 ms into everysegment. A special algorithm ensuresthat objects larger than 70 mm – thiscorresponds to the scanner resolution –are reliably detected. However, it alsoensures that dust and other disturbingeffects do not have a negative impact onthe availability of the system.Personnel protective field 4 mWarning fieldWorking area15 m0.36°185°50 mSIGUARD laser scanners LS4 detectpersons – even when they are wearingdark clothing – in a safety-related fashionup to 4 meters away. Persons andOnly personnel protective fields are shownSIGUARD laser scanners can be flexiblyadapted to every requirement using fourvariable protective field pairs forpersonnel protection and warning fields.These protective field pairs can besimply set at the PC. The SIGUARDlaser scanner can be used on stationarymachines and systems, but it can alsobe used for mobile applications mountedon vehicles, driverless transport systemsor trolleys. This means, for example, thatvarious operating areas of a robot can besecured where the laser scannerconsecutively scans the different areas.Using four programmable protectivefields, driverless transport systems canbe secured e.g., for fast travel, slowtravel, lefthand and righthand curves.Software for every applicationIt is extremely easy to precisely set thelaser scanner thanks to the LS4soft PCoperator software. The followingfunctions are integrated:▪ Protective fields can be easilyconfigured using either a PC or laptop▪ Additional functions such as protectivefield changeover, restart inhibit etc.can be configured using a softwareassistant▪ Extensive range of displays – e.g.,defined protective fields, actual scancontour, system settings etc.▪ Safe access protection usingpasswords with various authorizationstages▪ LS4soft can run under MicrosoftWindows 95/98/2000/NT/XP13-52 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Low Voltage SwitchgearArc Flash SolutionsConnection ExamplesGeneral+ 24V0VPEAS-Interface Safety at Work1,25A mTEvaluation unit orfault-tolerant PLCAS-Interfaceauxiliary voltageor 24 V DC24 VOptional: Localbutton for restartProtective field 1–4Addressing socket1 2 3 4 5 6 7 8 9 101112131415X1SIGUARD laser scanner LS4SIGUARD laser scanner “Standard” with protective fieldchangeover and start button▪ Start button for manual restart directly at the scanner(connection 2)▪ Alarm output at connection 5 (e.g., warning lamp)▪ Protective field changeover at connections 4, 6, 7 and 8▪ Safety-related processing of the safe outputs (connections 11and 12) through an evaluation unit or fault-tolerant PLCSIGUARD laser scanner AS-Interface▪ Directly connected to AS-Interface Safety at Work▪ Safety-related shutdown using the safety monitor▪ Protective field changeover as for the standard scanner▪ A local button can be optionally connected for manual restart▪ All of the connections are established through M12connectorsPROFIBUSSIGUARD laser scanner LS4PROFIBUSor terminating resistor at the end node13SWITCHGEAR+ 24V+24V24 V DC0VPE1,25AmT1 ATContactormonitoringk46,3 AF6,3 AFOptional: Localbutton for restartSafety outputk5A1(L+)S1S33 S34 S35 S31 S221 2 31 2 3 4 5 6 7 8 9 101112131415CH1K1SIGUARD 3RG7847-4BBCH2K2N.O.N.O.SIGUARD Laserscanner LS4SIGUARD laser scanner LS40VSIGUARD laser scanner “Standard” with 3RG7847-4BBevaluation unit▪ Start button for manual restart directly at the scanner(connection 2)▪ Permanently set protective field pair 1 (24 V permanentlyconnected to connection 4)A2(L-S21 S12K4*1 2 3K5**provide suitablespark quenchingSIGUARD laser scanner PROFIBUS▪ Directly connected to PROFIBUS▪ The shutdown signal is safely transferred via the PROFIBUSPROFIsafe profile▪ Safe protective field changeover also via PROFIBUS▪ Laser scanners can be quickly replaced thanks to theautomatic parameter transfer▪ A local button can be optionally connected for manual restart▪ All of the connections are established through M12connectorsFor more information, please visit http://automation.usa.siemens.com/consultant/ or contact your local sales office.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog13-53

NotesSWITCHGEAR1313-54 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

14SPEEDFAX TM 2007-2008 Busway SystemsContentsGeneral Pricing Notes 14-2Busway Selector 14-3Sentron ® BuswayCatalog Numbering System 14-4Busway, Aluminum 14-5 – 14-7Busway, Copper 14-8 – 14-10Busway, Accessories 14-11 – 14-12Sentron ® Bus PlugsCatalog Numbering System 14-13Fusible Bus Plugs 14-14Circuit Breakers 14-15 – 14-16Sentron ® MiscellaneousSentron ® Cubicles 14-17Meter Center Taps 14-18Sentron ® General & Technical InformationNational Electric Code—References 14-19 – 14-20Sentron Busway Overview 14-21 – 14-22Sentron Bus Plug Overview 14-23Technical Data 14-24 – 14-25Straight Sections - Plug-In, Riser & Feeder 14-26 – 14-27Elbows 14-28 – 14-29Offsets & Combinations 14-30 – 14-31Tees 14-32End Tap Boxes 14-33Center Tap Boxes 14-34In-Line Disconnect Cubicles & Expansion Fittings 14-35Reducers & Phase Rotation Fittings 14-36Service Heads 14-37Hangers 14-38 – 14-39Hangers & End Closers 14-40Roof & Wall Flanges 14-41Flanged Ends 14-42 – 14-43Panelboards & Meter Center Modules 14-44Molded Case Circuit Breaker Cubicles with Meter Tap Stack Provisions 14-45Installation & Application Information 14-46Sentron Busway Quick Reference 14-47XJ-L, Plug-inBusway, Copper 14-48Busway, Accessories 14-49BD, Plug-inBusway, Aluminum and Copper 14-50Busway, Accessories 14-51XL-U, Plug-In, FeederBusway, Aluminum 14-52Busway, Accessories 14-53Busway, Copper 14-54Busway, Accessories 14-55Bus PlugsXJ-L 14-56XL-X, XL-U, BD 14-57 – 14-58CubiclesXL-X, XL-U, BD 14-59Mobile Industrial Trol-E Duct2 and 3-Pole Duct, Accessories 14-60 – 14-614-Pole Duct, Accessories 14-6214 BUSWAYSYSTEMSResidential Commercial Industrial

14BUSWAYSYSTEMSBusway Systems OverviewPricing NotesA. Footage Pricing1. Sentron and XL-U base pricing islisted on a per foot charge. Whencalculating the footage charge,fractions are figured to the nextlarger number of whole feet (i.e.,a linear run totaling 66'3" wouldbe priced at 67 feet.2. BD, XJ-L and ITD base pricing islisted on a per section charge.B. AccessoriesSome busway accessories arelisted as complete device priceswhile others are listed underaccessory charges.1. Complete device price includes allmaterial and accessory chargesfor a standard device. (Buswayfootage included if applicable).2. Accessory Charge includesfabrication and any miscellaneousfittings for the standard device.(No busway footage included).C. End Cable Tap Boxes are designedto be installed at the beginning orend of a busway run. The buswayrating determines the tap box listprice. Mechanical lugs are standard.For compression lugs add 30% totap box list price.D. Elbows with an angle other than 90degrees, the accessory charge is tobe doubled.E. Flange Ends (SwitchboardConnections / Stubs) accessoryprices are for connection to Siemensequipment. For connection to othermanufacturer’s equipment, multiplythe flange end list price by 2.5.Standard list price includes eightinches of bus extension intoequipment from mounting flange,if more than 8 inches requiredconsult factory for pricing. SentronSwitchboards can be assembledwith the Busway Flanged Endpre-installed, eliminating the laborto connect the Busway to theswitchboard at the job site.F. Service Heads are speciallyconstructed tap boxes suitable foroutdoor use and are equipped toaccept service cables through aremovable insulated bottom plate.The busway should be pricedthrough the end of the run.G. Phase Transpositions can be builtinto a busway section to providebetter voltage balance on long runs.To price, use the “Expansion Section”accessory charge for the appropriateampere rating.H. HangersSentron and XL-U busway are ULlisted for standard hanger spacingof ten feet (on center). Purchasingbusway hangers for horizontalinstallations is optional. Unistrut/Kindorf is commonly used bycontractors as an approvedalternative.Two hangers are furnished free ofcharge with every straight section ofBD and XJ-L. For ITD refer to pricingsection. Self compensating “Spring”hangers required for verticalinstallations are designed to be fieldinstalled by the installer and areshipped separately. These are alsoused as intermediate supports wherefloor-to-floor height is greater than 16feet.I. Ceiling, Floor And Wall Flanges areused when busway passes through afloor or wall and are intended tocover that portion of the openingaround the outside of the busway.They are not to be used tosupport the busway.J. Reducers price is determined by therating of the larger busway. Fusedreducers do not include fuses.K. Special Paint — Busway Sections,Accessories And Bus PlugsStandard finish is ASA #61 light gray.For other than standard color, add20% and consult factory foravailability.L. For Silver Finishing of Copper BusBars, add 10%.M. Roof Flanges are specially constructedcollars and plates built onto a section of3R busway which passes through a flator angled roof. Roof pitch must begiven for angled roof.GeneralN. Circuit Breaker Type Bus Plugsfor Sentron Busways are priced as“complete devices” with circuitbreakers factory installed.Circuit Breaker plugs for XJ-L, BD,XL-U and XL-X busways are priced“enclosure only.” When orderedwith breaker, standard procedureis to individually ship both theenclosure and circuit breaker.When ordering bus plugs withbreaker factory installed, addenclosure and breaker pricestogether and add 20% to the total,specify when ordering and allowtime for assembly.O. Fusible Type Bus Plugs do notinclude fuses. Adapter kits for ClassR, T & J fuses are available for fieldinstallation.P. Cubicle list prices include labor andmaterial for a single frame devicewith enclosure including line sideinternal bussing for connection tobusway and protective device.Fuses and load side bussing arenot included in the base price.Q. Sentron Busway has been tested inaccordance with UL1479 and offersa certified two hour fire rating forgypsum wall board construction,and a three hour fire rating forconcrete slab or block penetrations.These ratings were achieved usingstandard busway installed withSpecSeal ® sealant fromSpecified Technologies Inc.This material is available throughElectrical Distribution.R. Refer to the following publicationsfor additional technical informationand physical parameters.Sentron Busway BUSA-05501XL-U Busway 5.3.2BD Busway BUSA-5331XJ-L Busway BUPC-XJL-01TROL-E-DUCT 5.2.114-2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Busway Systems OverviewSelector Chart (100-6500 Ampere)I-T-E (then known as Bulldog Electric)was the first manufacturer to make aBusway System. Since its introduction inBusway Selector Chart1932, Busway Systems have improvedand expanded into several designs tomeet the ever changing needs of theGeneralelectrical industry. The Busway SelectionChart below will help you in selecting theproper product to fit your requirements.100-6500 Ampere 600 Volts or LessProductFeaturePlug-in and Feeder BuswaySentron XL-U XJ-L BD IndustrialPlug-in/Feeder Plug-in Feeder Plug-in Plug-in Trol-E-Duct100 150 200 225 400 Ampere 600 Rating 800 1000 1200 1350 1600 2000 2500 3000 3200 4000 5000 6000, 6500 ConductorCopper Aluminum UseIndoor Outdoor 2W1Ø3WAC Service 3Ø3W 50-60 Hz 3Ø4W FN 400Hz 3Ø4W 200% N Voltage 600 volts or less ConstructionVentilatedNon-Ventilated UL 857 Meets NEMA BU1 Electrical CSA/CUL C22.2 NO 27 Standard ANCE NMX-J-148ANCE IEC60439-1 1993 60439-2 1993 14 BUSWAYSYSTEMS Meets most applicable provisions of this foreignstandard. Consult factory for information.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-3

14BUSWAYSYSTEMSSentron ® Busway SystemsCatalog Numbering SystemS X 4 0 2 C 1 0 SentronSX = US LengthsConfiguration3 = 3Ø, 3W4 = 3Ø, 4W 100% Neutral5 = 3Ø, 4W 200% NeutralAmpere Rating02 = 225A 32 = 3200A04 = 400A 40 = 4000A06 = 600A 50 = 5000A 08 = 800A10 = 1000A12 = 1200A13 = 1350A16 = 1600A20 = 2000A25 = 2500A30 = 3000ABus Bar MaterialC = CopperM = 1000 Amps/In 2 CopperA = AluminumL = 750 Amps/In 2 AluminumGround1 = Integral (Housing)2 = Internal Bus Bar 3 = Isolated Ground IP Rating0 = IP40 4 = IP55 6 = IP66 9 = NEMA 3R Copper only Copper or aluminum ground bar IEC Markets NEMA Markets For odd degree angle (other than 90°) specify the degree angle of the turn. Indoor only (Plug-in and Feeder) Outdoor use (Feeder only) Elbow Stack (IP40 and IP55 only)• Catalog Numbers for Hangers can be found on page 14-12.• Specials must be ordered by description (drawing must be included). Contact factoryfor pricing.Suffix part of Catalog NumbersP L 0 6 Feeder Length in Inches, ex.: 2'3" = 027Feeder lengths available from 2'0"(024 Inches) up to 10'0" (120 inches)Plug-in L Length 04 = 4'0"06 = 6'0"08 = 8'0"10 = 10'0"Riser I Length 04 = 4'0"06 = 6'0"08 = 8'0"10 = 10'0"ElbowsS = Stack L = 90° Edge UpO = OddDowndegree angle Flat RightLeftTees E Edge UpDownFlatSelectionRightLeftOffsets F Edge UpDownFlatRightLeftCombinations O Edge Up Flat LeftEdge Down Flat LeftEdge Up Flat RightEdge Down Flat RightFlat LeftFlat LeftFlat RightFlat RightEXpansion P F TFittingsEdge UpEdge DownEdge UpEdge DownCenter Cable T B StandardTap BoxesEXpandedEnd Cable T Vertical StandardTap Boxes Horizontal EXpandedEnd Closers C L SFlanGe Roof F LWallJoint Stacks Standard S TIsolationSerVice Heads 1 = 1-Phase Tranformer H3 = 3-PhaseT = Throat Utility Florida Pwr/LightHouston Pwr/LightCommonwealth EDPacific Gas/ElectricDetroit EdisonOtherReducers Fused R FNon-fused R NFlanged End E = Int’l Standard N DR = U.S. Standard NDO = OtherTransposition R PG = Phase & GroundPO = Phase onlyGO = Ground only14-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Sentron ® Straight Section BuswayAluminum (225 – 1000 Ampere)Selection225A AluminumBasic Catalog Number SX302A1 SX302A2 SX302A3 SX402A1 SX502A1 SX402A2 SX502A2 SX402A3 SX502A34-Pole4-PoleInternalIsolatedAdd Suffix3-Pole 3-Pole 4-Pole 4-Pole Ground 4-Pole GroundTo BasicInternal Isolated 200% Internal 200% Isolated 200%BuswayCatalog 3-Pole Ground Ground 4-Pole Neutral Ground Neutral Ground NeutralTypeNumber List Price Per Foot $Feeder IP40 0F 249.00 264.00 274.00 276.00 349.00 312.00 386.00 367.00 405.00Feeder IP55 4F 293.00 308.00 322.00 326.00 410.00 367.00 455.00 390.00 479.00Feeder 3R 9F 374.00 393.00 411.00 415.00 524.00 471.00 580.00 497.00 608.00Plug-in IP40 0P 268.00 282.00 293.00 295.00 370.00 332.00 405.00 349.00 421.00Plug-in IP55 4P 318.00 335.00 348.00 349.00 436.00 372.00 481.00 417.00 504.00Riser IP40 0R 259.00 273.00 284.00 285.00 360.00 322.00 397.00 341.00 415.00Riser IP55 4R 259.00 321.00 336.00 337.00 424.00 360.00 470.00 403.00 491.00400A AluminumBasic Catalog Number SX304A1 SX304A2 SX304A3 SX404A1 SX504A1 SX404A2 SX504A2 SX404A3 SX504A3Feeder IP40 0F 249.00 264.00 274.00 276.00 349.00 312.00 386.00 332.00 405.00Feeder IP55 4F 293.00 308.00 322.00 326.00 410.00 367.00 455.00 390.00 479.00Feeder 3R 9F 374.00 393.00 411.00 415.00 524.00 471.00 580.00 342.00 608.00Plug-in IP40 0P 268.00 282.00 293.00 295.00 370.00 332.00 405.00 349.00 424.00Plug-in IP55 4P 318.00 335.00 348.00 349.00 436.00 393.00 481.00 391.00 504.00Riser IP40 0R 259.00 273.00 284.00 285.00 360.00 322.00 397.00 341.00 415.00Riser IP55 4R 305.00 321.00 336.00 337.00 424.00 380.00 470.00 403.00 491.00600A AluminumBasic Catalog Number SX306A1 SX306A2 SX306A3 SX406A1 SX506A1 SX406A2 SX506A2 SX406A3 SX506A3Feeder IP40 0F 249.00 264.00 274.00 276.00 349.00 312.00 386.00 332.00 405.00Feeder IP55 4F 293.00 308.00 322.00 326.00 410.00 367.00 455.00 390.00 479.00Feeder 3R 9F 374.00 393.00 411.00 415.00 524.00 471.00 580.00 497.00 608.00Plug-in IP40 0P 268.00 282.00 293.00 295.00 370.00 332.00 405.00 349.00 424.00Plug-in IP55 4P 318.00 335.00 348.00 349.00 436.00 393.00 481.00 417.00 504.00Riser IP40 0R 259.00 273.00 284.00 285.00 360.00 322.00 397.00 341.00 415.00Riser IP55 4R 305.00 321.00 336.00 337.00 424.00 380.00 470.00 403.00 491.00800A AluminumBasic Catalog Number SX308A1 SX308A2 SX308A3 SX408A1 SX508A1 SX408A2 SX508A2 SX408A3 SX508A3Feeder IP40 0F 271.00 282.00 293.00 295.00 373.00 333.00 410.00 353.00 431.00Feeder IP55 4F 321.00 332.00 343.00 346.00 439.00 391.00 484.00 417.00 510.00Feeder 3R 9F 409.00 424.00 440.00 441.00 559.00 500.00 617.00 529.00 646.00Plug-in IP40 0P 290.00 298.00 310.00 311.00 390.00 352.00 429.00 370.00 449.00Plug-in IP55 4P 343.00 357.00 368.00 370.00 462.00 417.00 510.00 415.00 533.00Riser IP40 0R 280.00 291.00 301.00 302.00 383.00 342.00 420.00 360.00 440.00Riser IP55 4R 332.00 343.00 357.00 358.00 451.00 404.00 497.00 429.00 521.001000A AluminumBasic Catalog Number SX310A1 SX310A2 SX310A3 SX410A1 SX510A1 SX410A2 SX510A2 SX410A3 SX510A3Feeder IP40 0F 295.00 315.00 333.00 336.00 424.00 379.00 467.00 403.00 490.00Feeder IP55 4F 346.00 370.00 393.00 395.00 500.00 448.00 552.00 472.00 579.00Feeder 3R 9F 441.00 471.00 502.00 503.00 636.00 572.00 702.00 604.00 735.00Plug-in IP40 0P 311.00 332.00 352.00 353.00 441.00 398.00 484.00 420.00 508.00Plug-in IP55 4P 370.00 393.00 418.00 420.00 524.00 471.00 575.00 497.00 604.00Riser IP40 0R 302.00 324.00 342.00 343.00 433.00 389.00 477.00 410.00 498.00Riser IP55 4R 358.00 383.00 405.00 408.00 512.00 459.00 564.00 484.00 591.0014 BUSWAYSYSTEMSFeeder or Plug-inIndoorSplash ProofIP40IP55Feeder OnlyOutdoorNEMA 3RDiscount Schedule BUSW Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-5

Sentron ® Straight Section BuswayAluminum (1200– 2000 Ampere)1200A AluminumSelectionBasic Catalog Number SX312A1 SX312A2 SX312A3 SX412A1 SX512A1 SX412A2 SX512A2 SX412A3 SX512A34-Pole4-PoleInternalIsolatedAdd Suffix3-Pole 3-Pole 4-Pole 4-Pole Ground 4-Pole GroundTo BasicInternal Isolated 200% Internal 200% Isolated 200%BuswayCatalog 3-Pole Ground Ground 4-Pole Neutral Ground Neutral Ground NeutralTypeNumber List Price Per Foot $Feeder IP40 0F 333.00 395.00 456.00 459.00 579.00 518.00 637.00 548.00 668.00Feeder IP55 4F 391.00 466.00 541.00 542.00 684.00 611.00 753.00 648.00 788.00Feeder 3R 9F 502.00 595.00 687.00 689.00 865.00 772.00 957.00 819.00 1005.00Plug-in IP40 0P 352.00 414.00 473.00 477.00 596.00 535.00 655.00 565.00 686.00Plug-in IP55 4P 417.00 490.00 564.00 565.00 708.00 636.00 772.00 672.00 819.00Riser IP40 0R 342.00 404.00 466.00 467.00 587.00 528.00 646.00 556.00 677.00Riser IP55 4R 404.00 479.00 552.00 554.00 697.00 624.00 766.00 659.00 803.0014BUSWAYSYSTEMS1350A AluminumBasic Catalog Number SX313A1 SX313A2 SX313A3 SX413A1 SX513A1 SX413A2 SX513A2 SX413A3 SX513A3Feeder IP40 0F 398.00 398.00 518.00 521.00 656.00 587.00 722.00 622.00 758.00Feeder IP55 4F 467.00 467.00 614.00 615.00 772.00 696.00 850.00 735.00 896.00Feeder 3R 9F 596.00 596.00 788.00 788.00 988.00 881.00 1081.00 927.00 1129.00Plug-in IP40 0P 415.00 415.00 535.00 539.00 673.00 605.00 741.00 639.00 772.00Plug-in IP55 4P 492.00 492.00 637.00 639.00 803.00 718.00 881.00 760.00 912.00Riser IP40 0R 405.00 405.00 528.00 529.00 666.00 596.00 731.00 748.00 763.00Riser IP55 4R 480.00 480.00 625.00 627.00 788.00 706.00 865.00 748.00 912.001600A AluminumBasic Catalog Number SX316A1 SX316A2 SX316A3 SX416A1 SX516A1 SX416A2 SX516A2 SX416A3 SX516A3Feeder IP40 0F 466.00 534.00 603.00 604.00 760.00 680.00 834.00 719.00 881.00Feeder IP55 4F 549.00 629.00 711.00 714.00 896.00 803.00 988.00 850.00 1036.00Feeder 3R 9F 699.00 803.00 896.00 912.00 1143.00 1019.00 1253.00 1081.00 1314.00Plug-in IP40 0P 483.00 552.00 618.00 621.00 772.00 698.00 850.00 737.00 896.00Plug-in IP55 4P 574.00 655.00 735.00 737.00 927.00 834.00 1019.00 881.00 1067.00Riser IP40 0R 473.00 543.00 610.00 611.00 768.00 689.00 850.00 729.00 881.00Riser IP55 4R 562.00 642.00 722.00 727.00 912.00 819.00 1005.00 865.00 1050.002000A AluminumBasic Catalog Number SX320A1 SX320A2 SX320A3 SX420A1 SX520A1 SX420A2 SX520A2 SX420A3 SX520A3Feeder IP40 0F 570.00 637.00 706.00 708.00 896.00 803.00 974.00 974.00 1019.00Feeder IP55 4F 672.00 753.00 834.00 834.00 1050.00 943.00 1160.00 1160.00 1222.00Feeder 3R 9F 850.00 957.00 1067.00 1067.00 1329.00 1205.00 1469.00 1469.00 1545.00Plug-in IP40 0P 586.00 655.00 722.00 727.00 912.00 819.00 1005.00 1005.00 1036.00Plug-in IP55 4P 697.00 772.00 865.00 865.00 1081.00 974.00 1191.00 1191.00 1236.00Riser IP40 0R 577.00 646.00 715.00 717.00 896.00 803.00 988.00 988.00 1036.00Riser IP55 4R 684.00 766.00 850.00 850.00 1067.00 957.00 1174.00 1174.00 1222.00Feeder or Plug-inIndoorSplash ProofIP40IP55Feeder OnlyOutdoorNEMA 3R14-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule BUSW

Sentron ® Straight Section BuswayAluminum (2500 – 4000 Ampere)Selection2500A AluminumBasic Catalog Number SX325A1 SX325A2 SX325A3 SX425A1 SX525A1 SX425A2 SX525A2 SX425A3 SX525A34-Pole4-PoleInternalIsolatedAdd Suffix3-Pole 3-Pole 4-Pole 4-Pole Ground 4-Pole GroundTo BasicInternal Isolated 200% Internal 200% Isolated 200%BuswayCatalog 3-Pole Ground Ground 4-Pole Neutral Ground Neutral Ground NeutralTypeNumber List Price Per Foot $Feeder IP40 0F 749.00 834.00 912.00 912.00 1143.00 1036.00 1267.00 1098.00 1329.00Feeder IP55 4F 881.00 988.00 1081.00 1081.00 1360.00 1222.00 1500.00 1298.00 1562.00Feeder 3R 9F 1129.00 1253.00 1376.00 1376.00 1731.00 1545.00 1901.00 1638.00 1994.00Plug-in IP40 0P 766.00 850.00 927.00 927.00 1160.00 1050.00 1284.00 1112.00 1345.00Plug-in IP55 4P 865.00 1005.00 1112.00 1112.00 1391.00 1253.00 1531.00 1314.00 1593.00Riser IP40 0R 759.00 834.00 927.00 927.00 1160.00 1036.00 1267.00 1098.00 1329.00Riser IP55 4R 896.00 988.00 1098.00 1098.00 1376.00 1236.00 1514.00 1298.00 1576.003000A AluminumBasic Catalog Number SX330A1 SX330A2 SX330A3 SX430A1 SX530A1 SX430A2 SX530A2 SX430A3 SX530A3Feeder IP40 0F 896.00 957.00 1036.00 1036.00 1298.00 1174.00 1438.00 1236.00 1500.00Feeder IP55 4F 1050.00 1143.00 1222.00 1236.00 1545.00 1391.00 1700.00 1469.00 1777.00Feeder 3R 9F 1345.00 1452.00 1562.00 1562.00 1963.00 1762.00 2149.00 1855.00 2257.00Plug-in IP40 0P 912.00 988.00 1050.00 1050.00 1314.00 1191.00 1452.00 1253.00 1514.00Plug-in IP55 4P 1081.00 1160.00 1253.00 1253.00 1562.00 1407.00 1731.00 1483.00 1808.00Riser IP40 0R 896.00 974.00 1050.00 1050.00 1314.00 1174.00 1438.00 1253.00 1514.00Riser IP55 4R 1067.00 1160.00 1236.00 1236.00 1562.00 1407.00 1717.00 1483.00 1793.003200A AluminumBasic Catalog Number SX332A1 SX332A2 SX332A3 SX432A1 SX532A1 SX432A2 SX532A2 SX432A3 SX532A3Feeder IP40 0F 973.00 1081.00 1310.00 1310.00 1654.00 1485.00 1422.00 1345.00 1715.00Feeder IP55 4F 1143.00 1282.00 1407.00 1423.00 1948.00 2374.00 1685.00 1593.00 2040.00Feeder 3R 9F 1452.00 1623.00 1793.00 1793.00 2458.00 2243.00 2133.00 2026.00 2582.00Plug-in IP40 0P 988.00 1097.00 1206.00 1206.00 1500.00 1361.00 1669.00 1437.00 1731.00Plug-in IP55 4P 1174.00 1298.00 1438.00 1438.00 1793.00 1607.00 1978.00 1700.00 2071.00Riser IP40 0R 973.00 1081.00 1206.00 1206.00 1500.00 1345.00 1700.00 1437.00 1731.00Riser IP55 4R 1159.00 1298.00 1423.00 1423.00 1793.00 1593.00 1963.00 1700.00 2056.004000A AluminumBasic Catalog Number SX340A1 SX340A2 SX340A3 SX440A1 SX540A1 SX440A2 SX540A2 SX440A3 SX540A3Feeder IP40 0F 1112.00 1314.00 1500.00 1500.00 1870.00 1686.00 2071.00 1777.00 2164.00Feeder IP55 4F 1329.00 1545.00 1777.00 1777.00 2226.00 1994.00 2443.00 2102.00 2566.00Feeder 3R 9F 1686.00 1963.00 2241.00 2241.00 2814.00 2535.00 3092.00 2675.00 3232.00Plug-in IP40 0P 1129.00 1329.00 1514.00 1514.00 1886.00 1700.00 2087.00 1793.00 2180.00Plug-in IP55 4P 1345.00 1576.00 1793.00 1793.00 2241.00 2025.00 2474.00 2133.00 2582.00Riser IP40 0R 1129.00 1314.00 1500.00 1500.00 1886.00 1700.00 2071.00 1793.00 2164.00Riser IP55 4R 1329.00 1562.00 1777.00 1777.00 2241.00 2009.00 2458.00 2118.00 2566.0014 BUSWAYSYSTEMSFeeder or Plug-inIndoorSplash ProofIP40IP55Feeder OnlyOutdoorNEMA 3RDiscount Schedule BUSW Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-7

14BUSWAYSYSTEMSSentron ® Straight Section BuswayCopper (225 – 1000 Ampere)Selection225A CopperBasic Catalog Number SX302C1 SX302C2 SX302C3 SX402C1 SX502C1 SX402C2 SX502C2 SX402C3 SX502C34-Pole4-PoleInternalIsolatedAdd Suffix3-Pole 3-Pole 4-Pole 4-Pole Ground 4-Pole GroundTo BasicInternal Isolated 200% Internal 200% Isolated 200%BuswayCatalog 3-Pole Ground Ground 4-Pole Neutral Ground Neutral Ground NeutralTypeNumber List Price Per Foot $Feeder IP40 0F 380.00 430.00 478.00 479.00 606.00 542.00 668.00 572.00 698.00Feeder IP55 4F 446.00 503.00 561.00 565.00 714.00 639.00 787.00 675.00 824.00Feeder 3R 9F 571.00 642.00 717.00 719.00 906.00 812.00 1009.00 854.00 1043.00Plug-in IP40 0P 401.00 452.00 499.00 500.00 627.00 561.00 687.00 592.00 719.00Plug-in IP55 4P 476.00 533.00 591.00 592.00 741.00 668.00 817.00 705.00 854.00Riser IP40 0R 390.00 441.00 489.00 490.00 616.00 550.00 679.00 583.00 709.00Riser IP55 4R 461.00 520.00 578.00 579.00 728.00 652.00 800.00 691.00 840.00400A CopperBasic Catalog Number SX304C1 SX304C2 SX304C3 SX404C1 SX504C1 SX404C2 SX504C2 SX404C3 SX504C3Feeder IP40 0F 380.00 430.00 478.00 479.00 606.00 542.00 668.00 572.00 698.00Feeder IP55 4F 446.00 503.00 561.00 565.00 714.00 639.00 787.00 675.00 824.00Feeder 3R 9F 571.00 642.00 717.00 719.00 906.00 812.00 1009.00 854.00 1043.00Plug-in IP40 0P 401.00 452.00 499.00 500.00 627.00 561.00 687.00 592.00 719.00Plug-in IP55 4P 476.00 533.00 591.00 592.00 741.00 668.00 817.00 705.00 854.00Riser IP40 0R 390.00 441.00 489.00 500.00 616.00 550.00 679.00 583.00 709.00Riser IP55 4R 461.00 520.00 578.00 579.00 728.00 652.00 800.00 691.00 840.00600A CopperBasic Catalog Number SX306C1 SX306C2 SX306C3 SX406C1 SX506C1 SX406C2 SX506C2 SX406C3 SX506C3Feeder IP40 0F 380.00 430.00 478.00 479.00 606.00 542.00 668.00 572.00 698.00Feeder IP55 4F 446.00 503.00 561.00 565.00 714.00 639.00 787.00 675.00 824.00Feeder 3R 9F 571.00 642.00 717.00 719.00 906.00 812.00 1009.00 854.00 1043.00Plug-in IP40 0P 401.00 452.00 499.00 500.00 627.00 561.00 687.00 592.00 719.00Plug-in IP55 4P 476.00 533.00 591.00 592.00 741.00 668.00 817.00 705.00 854.00Riser IP40 0R 390.00 441.00 489.00 490.00 616.00 550.00 679.00 583.00 709.00Riser IP55 4R 461.00 520.00 578.00 579.00 728.00 652.00 800.00 691.00 840.00800A CopperBasic Catalog Number SX308C1 SX308C2 SX308C3 SX408C1 SX508C1 SX408C2 SX508C2 SX408C3 SX508C3Feeder IP40 0F 417.00 476.00 530.00 531.00 669.00 600.00 738.00 634.00 773.00Feeder IP55 4F 490.00 556.00 624.00 625.00 788.00 708.00 872.00 749.00 906.00Feeder 3R 9F 625.00 709.00 794.00 797.00 1009.00 906.00 1112.00 957.00 1162.00Plug-in IP40 0P 435.00 493.00 548.00 549.00 687.00 618.00 740.00 652.00 791.00Plug-in IP55 4P 517.00 584.00 650.00 652.00 816.00 735.00 906.00 775.00 941.00Riser IP40 0R 428.00 483.00 537.00 539.00 679.00 608.00 747.00 642.00 781.00Riser IP55 4R 503.00 571.00 637.00 639.00 804.00 721.00 888.00 762.00 923.001000A CopperBasic Catalog Number SX310C1 SX310C2 SX310C3 SX410C1 SX510C1 SX410C2 SX510C2 SX410C3 SX510C3Feeder IP40 0F 461.00 565.00 667.00 668.00 841.00 753.00 923.00 797.00 975.00Feeder IP55 4F 542.00 667.00 787.00 788.00 991.00 888.00 1094.00 941.00 1145.00Feeder 3R 9F 692.00 846.00 991.00 1009.00 1264.00 1128.00 1386.00 1197.00 1454.00Plug-in IP40 0P 479.00 583.00 685.00 686.00 854.00 773.00 941.00 816.00 991.00Plug-in IP55 4P 568.00 692.00 812.00 816.00 1025.00 923.00 1128.00 975.00 1180.00Riser IP40 0R 470.00 572.00 674.00 675.00 850.00 762.00 941.00 806.00 975.00Riser IP55 4R 555.00 679.00 799.00 804.00 1009.00 906.00 1112.00 957.00 1162.00Feeder or Plug-inIndoorSplash ProofIP40IP55Feeder OnlyOutdoorNEMA 3R14-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule BUSW

Sentron ® Straight Section BuswayCopper (1200 – 2500 Ampere)Selection1200A CopperBasic Catalog Number SX312C1 SX312C2 SX312C3 SX412C1 SX512C1 SX412C2 SX512C2 SX412C3 SX512C34-Pole4-PoleInternalIsolatedAdd Suffix3-Pole 3-Pole 4-Pole 4-Pole Ground 4-Pole GroundTo BasicInternal Isolated 200% Internal 200% Isolated 200%BuswayCatalog 3-Pole Ground Ground 4-Pole Neutral Ground Neutral Ground NeutralTypeNumber List Price Per Foot $Feeder IP40 0F 598.00 703.00 805.00 806.00 1009.00 906.00 1112.00 957.00 1162.00Feeder IP55 4F 704.00 829.00 957.00 957.00 1197.00 1078.00 1317.00 1128.00 1386.00Feeder 3R 9F 906.00 1043.00 1214.00 1214.00 1523.00 1368.00 1675.00 1436.00 1744.00Plug-in IP40 0P 616.00 721.00 823.00 824.00 1025.00 923.00 1128.00 975.00 1180.00Plug-in IP55 4P 731.00 854.00 975.00 975.00 1231.00 1094.00 1351.00 1162.00 1401.00Riser IP40 0R 606.00 710.00 812.00 816.00 1025.00 923.00 1128.00 975.00 1180.00Riser IP55 4R 719.00 842.00 957.00 957.00 1214.00 1094.00 1333.00 1145.00 1401.001350A CopperBasic Catalog Number SX313C1 SX313C2 SX313C3 SX413C1 SX513C1 SX413C2 SX513C2 SX413C3 SX513C3Feeder IP40 0F 668.00 781.00 888.00 888.00 1128.00 1009.00 1231.00 1060.00 1299.00Feeder IP55 4F 788.00 923.00 1060.00 1060.00 1333.00 1197.00 1470.00 1264.00 1538.00Feeder 3R 9F 1009.00 1162.00 1333.00 1351.00 1693.00 1523.00 1864.00 1607.00 1949.00Plug-in IP40 0P 686.00 799.00 906.00 923.00 1145.00 1025.00 1264.00 1078.00 1317.00Plug-in IP55 4P 816.00 957.00 1078.00 1078.00 1351.00 1214.00 1488.00 1282.00 1556.00Riser IP40 0R 675.00 791.00 906.00 906.00 1128.00 1025.00 1249.00 1078.00 1299.00Riser IP55 4R 804.00 941.00 1078.00 1078.00 1351.00 1214.00 1488.00 1282.00 1556.001600A CopperBasic Catalog Number SX316C1 SX316C2 SX316C3 SX416C1 SX516C1 SX416C2 SX516C2 SX416C3 SX516C3Feeder IP40 0F 761.00 906.00 1025.00 1025.00 1299.00 1162.00 1436.00 1231.00 1488.00Feeder IP55 4F 906.00 1060.00 1214.00 1231.00 1538.00 1386.00 1693.00 1454.00 1779.00Feeder 3R 9F 1145.00 1351.00 1556.00 1556.00 1949.00 1744.00 2138.00 1846.00 2240.00Plug-in IP40 0P 779.00 923.00 1043.00 1060.00 1317.00 1180.00 1454.00 1249.00 1523.00Plug-in IP55 4P 923.00 1094.00 1249.00 1249.00 1556.00 1401.00 1727.00 1488.00 1796.00Riser IP40 0R 771.00 906.00 1043.00 1043.00 1299.00 1180.00 1436.00 1249.00 1505.00Riser IP55 4R 906.00 1078.00 1231.00 1231.00 1556.00 1386.00 1710.00 1470.00 1779.002000A CopperBasic Catalog Number SX320C1 SX320C2 SX320C3 SX420C1 SX520C1 SX420C2 SX520C2 SX420C3 SX520C3Feeder IP40 0F 975.00 1112.00 1264.00 1264.00 1591.00 1419.00 1744.00 1505.00 1830.00Feeder IP55 4F 1145.00 1317.00 1505.00 1505.00 1881.00 1693.00 2070.00 1779.00 2172.00Feeder 3R 9F 1454.00 1675.00 1899.00 1899.00 2377.00 2138.00 2618.00 2257.00 2737.00Plug-in IP40 0P 991.00 1128.00 1282.00 1282.00 1607.00 1454.00 1762.00 1523.00 1846.00Plug-in IP55 4P 1162.00 1351.00 1523.00 1523.00 1915.00 1710.00 2103.00 1812.00 2189.00Riser IP40 0R 975.00 1128.00 1264.00 1282.00 1591.00 1436.00 1762.00 1523.00 1830.00Riser IP55 4R 1162.00 1333.00 1505.00 1505.00 1881.00 1710.00 2086.00 1796.00 2172.002500A CopperBasic Catalog Number SX325C1 SX325C2 SX325C3 SX425C1 SX525C1 SX425C2 SX525C2 SX425C3 SX525C3Feeder IP40 0F 1231.00 1454.00 1660.00 1660.00 2070.00 1864.00 2291.00 1967.00 2394.00Feeder IP55 4F 1470.00 1710.00 1967.00 1967.00 2463.00 2207.00 2702.00 2344.00 2839.00Feeder 3R 9F 1864.00 2172.00 2481.00 2481.00 3113.00 2804.00 3421.00 2959.00 3591.00Plug-in IP40 0P 1249.00 1470.00 1675.00 1675.00 2103.00 1881.00 2309.00 1983.00 2412.00Plug-in IP55 4P 1488.00 1744.00 1983.00 1983.00 2481.00 2240.00 2737.00 2359.00 2857.00Riser IP40 0R 1249.00 1454.00 1660.00 1660.00 2086.00 1881.00 2291.00 1983.00 2394.00Riser IP55 4R 1470.00 1727.00 1967.00 1983.00 2481.00 2222.00 2720.00 2344.00 2857.0014 BUSWAYSYSTEMSFeeder or Plug-inIndoorSplash ProofIP40IP55Feeder OnlyOutdoorNEMA 3RDiscount Schedule BUSW Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-9

14BUSWAYSYSTEMSSentron ® Straight Section BuswayCopper (3000 – 5000 Ampere)3000A CopperSelectionBasic Catalog Number SX330C1 SX330C2 SX330C3 SX430C1 SX530C1 SX430C2 SX530C2 SX430C3 SX530C34-Pole4-PoleInternalIsolatedAdd Suffix3-Pole 3-Pole 4-Pole 4-Pole Ground 4-Pole GroundTo BasicInternal Isolated 200% Internal 200% Isolated 200%BuswayCatalog 3-Pole Ground Ground 4-Pole Neutral Ground Neutral Ground NeutralTypeNumber List Price Per Foot $Feeder IP40 0F 1505.00 1744.00 2001.00 2001.00 2496.00 2257.00 2754.00 2377.00 2873.00Feeder IP55 4F 1779.00 2070.00 2359.00 2377.00 2959.00 2667.00 3267.00 2822.00 3421.00Feeder 3R 9F 2240.00 2618.00 2994.00 2994.00 3762.00 3370.00 4138.00 3558.00 4328.00Plug-in IP40 0P 1523.00 1762.00 2018.00 2018.00 2531.00 2275.00 2770.00 2394.00 2907.00Plug-in IP55 4P 1796.00 2103.00 2394.00 2394.00 2994.00 2702.00 3302.00 2839.00 3439.00Riser IP40 0R 1505.00 1762.00 2001.00 2001.00 2514.00 2257.00 2770.00 2394.00 2891.00Riser IP55 4R 1796.00 2086.00 2377.00 2377.00 2976.00 2685.00 3284.00 2839.00 3439.003200A CopperBasic Catalog Number SX332C1 SX332C2 SX332C3 SX432C1 SX532C1 SX432C2 SX532C2 SX432C3 SX532C3Feeder IP40 0F 1660.00 1933.00 2207.00 2207.00 2771.00 2497.00 3045.00 2634.00 3182.00Feeder IP55 4F 1968.00 2291.00 2618.00 2634.00 3284.00 2960.00 3610.00 3130.00 3781.00Feeder 3R 9F 2463.00 2891.00 3318.00 3318.00 4157.00 3729.00 4585.00 3935.00 4789.00Plug-in IP40 0P 1676.00 1950.00 2224.00 2241.00 2789.00 2515.00 3063.00 2652.00 3216.00Plug-in IP55 4P 1984.00 2326.00 2652.00 2652.00 3318.00 2995.00 3644.00 3147.00 3797.00Riser IP40 0R 1660.00 1950.00 2224.00 2224.00 2789.00 2497.00 3063.00 2565.00 3199.00Riser IP55 4R 1968.00 2309.00 2634.00 2634.00 3302.00 2976.00 3627.00 3130.00 3797.004000A CopperBasic Catalog Number SX340C1 SX340C2 SX340C3 SX440C1 SX540C1 SX440C2 SX540C2 SX440C3 SX540C3Feeder IP40 0F 1949.00 2291.00 2633.00 2633.00 3302.00 2976.00 3643.00 3147.00 3797.00Feeder IP55 4F 2326.00 2720.00 3130.00 3130.00 3917.00 3523.00 4310.00 3728.00 4516.00Feeder 3R 9F 2925.00 3439.00 3968.00 3968.00 4959.00 4464.00 5457.00 4704.00 5713.00Plug-in IP40 0P 1967.00 2309.00 2651.00 2667.00 3317.00 2994.00 3660.00 3165.00 3831.00Plug-in IP55 4P 2344.00 2754.00 3147.00 3165.00 3951.00 3558.00 4344.00 3746.00 4533.00Riser IP40 0R 1967.00 2309.00 2651.00 2651.00 3317.00 2976.00 3643.00 3147.00 3815.00Riser IP55 4R 2326.00 2737.00 3147.00 3147.00 3934.00 3541.00 4328.00 3728.00 4533.005000A CopperBasic Catalog Number SX350C1 SX350C2 SX350C3 SX450C1 SX550C1 SX450C2 SX550C2 SX450C3 SX550C3Feeder IP40 0F 2326.00 2754.00 3165.00 3165.00 3968.00 3575.00 4362.00 3762.00 4567.00Feeder IP55 4F 2754.00 3249.00 3762.00 3762.00 4704.00 4225.00 5183.00 4464.00 5404.00Feeder 3R 9F 3489.00 4123.00 4755.00 4755.00 5952.00 5355.00 6552.00 5644.00 6842.00Plug-in IP40 0P 2344.00 2770.00 3180.00 3180.00 3986.00 3591.00 4379.00 3780.00 4583.00Plug-in IP55 4P 2788.00 3284.00 3780.00 3780.00 4738.00 4260.00 5200.00 4499.00 5439.00Riser IP40 0R 2326.00 2754.00 3180.00 3180.00 3968.00 3575.00 4379.00 3780.00 4567.00Riser IP55 4R 2770.00 3267.00 3762.00 3762.00 4720.00 4242.00 5183.00 4481.00 5422.00Feeder or Plug-inIndoorSplash ProofIP40IP55Feeder OnlyOutdoorNEMA 3R14-10Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule BUSW

Sentron ® Busway SystemsBusway Accessories“M” Rating/StandardRating Conversion Table1000/A Square InchStandard 55°C Rating“M” RatingSentron225 600400 800600 1200800 13501000 16001200 20001350 20001600 2000 25002500 40003000 40003200 40004000 5000“L” Rating/StandardRating Conversion Table750/A Square InchStandard 55°C Rating“L” RatingSentron225 600400 800600 1000800 12001000 13501200 16001350 20001600 20002000 25002500 30003000 40003200 4000SelectionFlanged XFMR XFMR PhaseEnd/ Cable Cable Expan- Rota- Flanges Isola-Ampere Elbow End Center Swbd. End XFMR Tap Tap sion Reducer Reducer tion Wall/ tion RoofRating Stack Elbow Tee Tap Box Tap Box Conn. Closure Throat 1-3 PH 3-1 PH Section Fused Unfused Section Floor Joint FlangeSuffix ES EL TE ET CT FE EC VT V3 V1 XP RF RN PR GW JI GR3-Pole225 830. 873. 1048. 1996. 1996. 918. 218. 4270. 976. 2797. 1486. 2097. 1106. 1486. 199. 844. 1136.400 830. 873. 1048. 1996. 1996. 976. 218. 4270. 976. 2797. 1486. 2097. 1106. 1486. 199. 844. 1136.600 830. 873. 1048. 1996. 1996. 1268. 218. 4270. 976. 2797. 1486. 2097. 1106. 1486. 199. 844. 1136.800 968. 1019. 1048. 2055. 2055. 1369. 218. 4750. 1035. 2988. 1777. 2404. 1268. 1777. 199. 844. 1136.1000 968. 1019. 1165. 2156. 2156. 1560. 220. 5202. 1093. 3147. 1952. 2725. 1443. 1952. 210. 903. 1136.1200 968. 1019. 1165. 2272. 2272. 1748. 220. 5640. 1136. 3322. 2113. 3249. 1719. 2113. 210. 903. 1136.1350 968. 1019. 1165. 2681. 2389. 1792. 228. 6003. 1194. 3396. 2302. 3454. 1836. 2302. 210. 903. 1136.1600 968. 1019. 1165. 2594. 2594. 2214. 228. 6528. 1253. 3555. 2477. 3905. 2069. 2477. 218. 931. 1136.2000 1106. 1165. 1165. 2900. 2900. 2346. 228. 7476. 1443. 3963. 2929. 4562. 2404. 2929. 218. 931. 1136.2500 1106. 1165. 1428. 3205. 3205. 2783. 279. 8613. 1719. 4357. 3396. 5538. 2929. 3396. 224. 961. 1136.3000 1106. 1165. 1428. 3409. 3409. 3322. 279. 10537. 2025. 4750. 3905. 6398. 3396. 3905. 224. 961. 1180.3200 1166. 1224. 1516. 3585. 3599. 4138. 279. 11047. 2113. 5013. 4226. 7010. 3716. 4226. 224. 961. 1180.4000 1289. 1355. 1705. 3934. 3934. 4138. 279. 12053. 2302. 2451. 4867. 8234. 4357. 4867. 224. 961. 1180.5000 1289. 1355. 1705. 4649. 4649. 4867. 279. 14253. 2638. 2809. 5741. 10085. 5333. 5741. 224. 961. 1238.4-Pole225 998. 1048. 1223. 2069. 2069. 976. 218. 4794. 1035. 2797. 1777. 2171. 1151. 1777. 199. 844. 1136.400 998. 1048. 1223. 2069. 2069. 1005. 218. 4794. 1035. 2797. 1777. 2171. 1151. 1777. 199. 844. 1136.600 998. 1048. 1223. 2069. 2069. 1297. 218. 4794. 1035. 2797. 1777. 2171. 1151. 1777. 199. 844. 1136.800 1019. 1078. 1223. 2272. 2272. 1413. 218. 5450. 1136. 2988. 2069. 3046. 1602. 2069. 199. 844. 1136.1000 1019. 1078. 1311. 2375. 2375. 1705. 220. 4022. 1194. 3147. 2302. 3571. 1894. 2302. 210. 903. 1136.1200 1019. 1078. 1311. 2594. 2594. 1821. 220. 6178. 1253. 3322. 2638. 4007. 2113. 2638. 210. 903. 1136.1350 1106. 1165. 1311. 2710. 2710. 1908. 228. 7243. 1385. 3396. 2827. 4445. 2346. 2827. 210. 903. 1136.1600 1106. 1165. 1311. 3001. 3001. 2230. 228. 7957. 1443. 3555. 3424. 5086. 2696. 3424. 218. 931. 1136.2000 1355. 1428. 1705. 3292. 3292. 2564. 228. 9268. 1719. 3963. 3730. 5945. 3147. 3730. 218. 931. 1136.2500 1355. 1428. 1705. 3730. 3730. 3104. 279. 10945. 1952. 4357. 4342. 7389. 3905. 4342. 224. 961. 1136.3000 1355. 1428. 1705. 4022. 4022. 3672. 279. 12446. 2244. 4750. 5042. 8671. 4591. 5042. 224. 961. 1180.3200 1443. 1515. 1792. 4329. 4329. 3979. 279. 13510. 2360. 5013. 5480. 9502. 5028. 5480. 224. 961. 1180.4000 1618. 1705. 1981. 4955. 4955. 4591. 279. 15623. 2579. 5552. 6353. 11149. 5902. 6353. 224. 961. 1180.5000 1618. 1705. 1981. 5669. 5669. 5815. 279. 18816. 3046. 6353. 7621. 13757. 7273. 7621. 224. 961. 1238.To price complete device, add the following appropriate IP feeder footage to the accessory charge.FlangedEndAmpere Elbow Tap Box Tap Box Swbd. XFMR Expansion Reducer ReducerRating Stack Elbow Tee Cross End Center Conn. Throat Section Fusible Unfused225–1350 Al225–1600 Cu1' 2' 3' 4' 1' 4' 1' 4' 4' 4' 4'1600–3200 Al2000–4000 Cu2' 3' 5' 6' 1' 4' 1' 4' 4' 4' 4'4000 Al5000 Cu3' 4' 6' 8' 1' 4' 1' 4' 4' 4' 4'14 BUSWAYSYSTEMS Elbows other than 90° double the labor charge. For connections to other manufactures switchboard,multiply accessory charge by 2.5 (Suffix is FO). Feeder only. 1600A “M” rating is a dedicated offering.Consult factory for pricing.Note: To price cross price 2 times elbow.Discount Schedule BUSW Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-11

Sentron ®Hangers, Floor SupportsBusway SystemsTrapeze Hangers Structural Steel Hangers Wall Mounted Hangers Catalog ListCatalog ListCatalog ListNumber Price $Number Price $Number Price $SXTH1 26.00SXSS1 36.00SXWH1 160.00SXTH2 35.00SXSS2 44.00SXWH2 183.00SXTH3 40.00SXSS3 51.00SXWH3 232.00SXTH4 54.00SXSS4 60.00SXWH4 273.00Selection14BUSWAYSYSTEMSSingle Drop Rod HangersAluminumCopperCatalog List Catalog ListNumber Price $ Number Price $SXDRA1 46.00 SXDRC1 54.00SXDRA2 54.00 SXDRC2 66.00SXDRA3 60.00 SXDRC3 74.00SXDRA4 66.00 SXDRC4 80.00SXDRA5 74.00 SXDRC5 86.00SXDRA6 80.00 SXDRC6 92.00SXDRA7 86.00 SXDRC7 104.00Spring Hanger/ Floor SupportCatalog ListNumber Price $SXSH4 235.00SXSH6 243.00SXSH8 255.00SXSH10 264.00SXSH12 273.00SXSH14 282.00Lifting Kit Catalog ListNumber Price $SXLK 63.00Sway Brace BracketCatalog ListNumber Price $SXSB 91.00Busway Assembly ToolCatalog ListNumber Price $SXBAT 63.00 See pages 14-38 to 14-39 for Hanger Applicationinformation. Used for mounting 400 and 600A Sentron Bus Plugs inriser applications. One kit required per bus plug.14-12Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule BUSW

Sentron ® Bus PlugsCatalog Numbering SystemSentron Bus Plugs—Circuit Breaker (Installed)S L E C S 3 2 0 1 5 0 G E D 2 Selection / ApplicationPlug TypeSL = Sentron IICircuit Breaker FrameE = 15–125AF = 70–250AJ = 200–400AL = 250–600AM = 500–800AEnclosure TypeC = Circuit Breaker EnclosureL = Current Limiting EnclosureCradle DesignationS = 3Ø3W, 3Ø4W>400A200%N>200A onlyConfiguration3 = 3Ø, 3W4 = 3Ø, 4W5 = 3Ø, 4W 200% neutral Breaker Voltage2 = 240V 4 = 480V 6 = 600VAmpere Trip RatingIP Rating0 = IP404 = IP55Ground DesignationG = Internal GroundIG = Isolated GroundCircuit Breaker Frame Identification14 BUSWAYSYSTEMSSentron SLVB Bus Plugs—FusibleS L V B R 3 2 1 0GPlug TypeSL = Sentron IIHeavy Duty Fusible SwitchVBOrientationR = RiserH = HorizontalConfiguration (Poles/Wires)3 = 3Ø3W4 = 3Ø4W5 = 3Ø4W 200% NeutralVoltage2 = 240V6 = 600VMax Ampere Rating1 = 30A2 = 60A3 = 100A4 = 200A5 = 400A6 = 600AIP Rating0 = IP404 = IP55Ground DesignationG = Internal GroundIG = Isolated Ground The S digit is only used on 3- and 4-wire (100%N) plugs that are greaterthan 400A and 200%N plugs greater than 200A. Lower amperage plugsdo not require this digit. (Ex. SLID3610, SLEC32060ED2) The G and IG digits are used to specify internal and isolated groundrespectively. Integral (housing) ground plugs do not require this digit.(Ex. SLID3610, SLEC360150ED6) Available through 400A only. Available with E, F and J Frame breakers only. Available with ED2 breakers only. Available with ED4 and HHED6 breakers only.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-13

Sentron ® SLVB Bus PlugsBus Plugs / Fusible PlugsAmpere Catalog ListRating Number Price $3-Pole, 250 Volt 30A SLVB*3210 734.00SLVB*3210G 833.00SLVB*3210IG 877.0060A SLVB*3220 807.00SLVB*3220G 907.00SLVB*3220IG 950.00100A SLVB*3230 1206.00SLVB*3230G 1307.00SLVB*3230IG 1349.00200A SLVB*3240 2017.00SLVB*3240G 2116.00SLVB*3240IG 2160.00400A SLVB*3250 5191.00SLVB*3250G 5291.00SLVB*3250IG 5377.00600A SLVB*3260 8064.00SLVB*3260G 8164.00SLVB*3260IG 8251.00Ampere Catalog List Catalog ListRating Number Price $ Number Price $4-Pole, 250 Volt, 200% Neutral 30A SLVB*4210 872.00 SLVB*5210 1010.00SLVB*4210G 970.00 SLVB*5210G 1109.00SLVB*4210IG 1014.00 SLVB*5210IG 1191.0060A SLVB*4220 893.00 SLVB*5220 1084.00SLVB*4220G 992.00 SLVB*5220G 1183.00SLVB*4220IG 1035.00 SLVB*5220IG 1265.00100A SLVB*4230 1409.00 SLVB*5230 845.00SLVB*4230G 439.00 SLVB*5230G 1578.00SLVB*4230IG 1476.00 SLVB*5230IG 676.00200A SLVB*4240 2316.00 SLVB*5240 2613.00SLVB*4240G 2414.00 SLVB*5240G 1841.00SLVB*4240IG 1684.00 SLVB*5240IG 2348.00400A SLVB*4250 5833.00 SLVB*5250 6241.00SLVB*4250G 5933.00 SLVB*5250G 6500.00SLVB*4250IG 6032.00 SLVB*5250IG 7152.00600A SLVB*4260 8229.00 — —SLVB*4260G 8328.00 — —SLVB*4260IG 8427.00 — —Selection14BUSWAYSYSTEMSAmpere Catalog ListRating Number Price $3-Pole, 600 Volt 30A SLVB*3610 807.00SLVB*3610G 907.00SLVB*3610IG 950.0060A SLVB*3620 870.00SLVB*3620G 969.00SLVB*3620IG 1013.00100A SLVB*3630 1227.00SLVB*3630G 1328.00SLVB*3630IG 1371.00200A SLVB*3640 2139.00SLVB*3640G 2239.00SLVB*3640IG 2283.00400A SLVB*3650 5537.00SLVB*3650G 5637.00SLVB*3650IG 5725.00600A SLVB*3660 8005.00SLVB*3660G 8106.00SLVB*3660IG 8205.00Ampere Catalog List Catalog ListRating Number Price $ Number Price $4-Pole, 600 Volt, 200% Neutral 30A SLVB*4610 906.00 SLVB*5610 1045.00SLVB*4610G 1005.00 SLVB*5610G 1142.00SLVB*4610IG 1049.00 SLVB*5610IG 1187.0060A SLVB*4620 937.00 SLVB*5620 1074.00SLVB*4620G 1036.00 SLVB*5620G 1175.00SLVB*4620IG 1080.00 SLVB*5620IG 1219.00100A SLVB*4630 1376.00 SLVB*5630 1591.00SLVB*4630G 1476.00 SLVB*5630G 1601.00SLVB*4630IG 1519.00 SLVB*5630IG 1645.00200A SLVB*4640 2451.00 SLVB*5640 2642.00SLVB*4640G 2476.00 SLVB*5640G 2773.00SLVB*4640IG 2519.00 SLVB*5640IG 2817.00400A SLVB*4650 5977.00 SLVB*5650 7327.00SLVB*4650G 6076.00 SLVB*5650G 8427.00SLVB*4650IG 6176.00 SLVB*5650IG 9269.00600A SLVB*4660 8838.00 — —SLVB*4660G 8937.00 — —SLVB*4660IG 9036.00 — —Note: Replace * in catalog number with “H” for horizontal applications and “R” for riser applications.Ground Detector AndPotentializer PlugCatalog ListDescription Number Price $For 2 or 3-pole240 and 480 voltservice. SLPGR3140G 819.00(IP40 constructiononly)Note: Available in IP40 construction only.Catalog ListDescription Number Price $Spring Kit SXSK 32.00 All plugs shown are rated IP40; if IP55 rating is desired,substitute a “4” for “0” in position 8 (or 9 for cradleplugs) of catalog number and apply one of the followinglist price adders:30A, 60A: $229.100A: $307.200A: $579.400A, 600A: $1039. 400A and larger bus plugs that require auxilary support.See also SXSK Spring Kit.Fuse Adapter KitsClass TClass JSwitch Std Fuse Class R List Catalog List Catalog ListRating Class Catalog Number Price $ Number Price $ Number Price $250V30A H, K SLR2030 105.00 — — — —60A H, K SLR2060 132.00 — — — —100A H, K SLR2100 89.00 SLT2100 92.00 — —200A H, K SLR2200 89.00 SLT2200 124.00 — —400A H, K, J SLR2400 132.00 SLT2400 124.00 — —600A H, K, J SLR2600 132.00 SLT2600 141.00 SLJ2600 529.00600V30A H, K, J SLR6030 124.00 — — — —60A H, K, J SLR6060 124.00 — — — —100A H, K, J SLR6100 89.00 SLT6100 141.00 — —200A H, K, J SLR6200 89.00 SLT6200 172.00 — —400A H, K, J SLR6400 132.00 SLT6400 185.00 — —600A H, K, J SLR6600 132.00 SLT6600 210.00 SLJ6600 249.00 Used on 400A and larger bus plugs that require auxilarysupport and that are mounted on vertical/riser busway.Kit contains two springs (part number 32-9909-04). Onekit required per bus plug.14-14Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule BPLU

Sentron ® Bus PlugsBus Plugs with Standard Circuit Breakers Ampere Catalog ListRating Number Price $E Frame 3-Pole, 240 Volt, ED2 BreakerSLEC32***0ED2 1106.0015-60A SLEC32***0GED2 1210.00SLEC32***0IGED2 1255.00SLEC32***0ED2 1106.0070-100A SLEC32***0GED2 1210.00SLEC32***0IGED2 1255.00E Frame 3-Pole, 480 Volt, ED4 BreakerSLEC34***0ED4 1363.0015-60A SLEC34***0GED4 1468.00SLEC34***0IGED4 1512.00SLEC34***0ED4 1512.0070-100A SLEC34***0GED4 1617.00SLEC34***0IGED4 1662.00SLEC34***0ED4 1710.00110-125A SLEC34***0GED4 1817.00SLEC34***0IGED4 1662.00E Frame 3-Pole, 600 Volt, ED6 BreakerSLEC36***0ED6 1503.0015-60A SLEC36***0GED6 1608.00SLEC36***0IGED6 1653.00SLEC36***0ED6 1668.0070-100A SLEC36***0GED6 1772.00SLEC36***0IGED6 1818.00SLEC36***0ED6 1870.00110-125A SLEC36***0GED6 1974.00SLEC36***0IGED6 2019.00F Frame 3-Pole, 600 Volt, FXD6 BreakerSLFC36***0FXD6 3733.0070-225A SLFC36***0GFXD6 3838.00SLFC36***0IGFXD6 3883.00SLFC362500FXD6 4453.00250A SLFC362500GFXD6 4557.00SLFC362500IGFXD6 4603.00J Frame 3-Pole, 600 Volt, JXD6 BreakerSLJC36***0JXD6 7301.00200-400A SLJC36***0GJXD6 7405.00SLJC36***0IGJXD6 7451.00L Frame 3-Pole, 600 Volt, LXD6 BreakerSLLCS36***0LXD6 10457.00450-600A SLLCS36***0GLXD6 10707.00SLLCS36***0IGLXD6 10838.00M Frame 3-Pole, 600 Volt, MXD6 BreakerSLMCS36***0MXD6 12246.00500-800A SLMCS36***0GMXD6 12617.00SLMCS36***0IGMXD6 12681.00SelectionAmpere Catalog List Ampere Catalog ListRating Number Price $ Rating Number Price $E Frame 4-Pole, 240 Volt, ED2 BreakerE Frame 4-Pole, 600 Volt, ED6 BreakerE Frame 200% NeutralSLEC46***0ED6 1661.00 SLEC56***0ED6 2083.0015-60A SLEC46***0GED6 1765.00 15-60A SLEC56***0GED6 2187.00SLEC46***0IGED6 1809.00 SLEC56***0IGED6 2233.00SLEC46***0ED6 1825.00 SLEC56***0ED6 2253.0070-100A SLEC46***0GED6 1930.00 70-100A SLEC56***0GED6 2360.00SLEC46***0IGED6 1975.00 SLEC56***0IGED6 2407.00SLEC46***0ED6 2027.00 SLEC56***0ED6 2393.00110-125A SLEC46***0GED6 2132.00 110-125A SLEC56***0GED6 2498.00SLEC46***0IGED6 2178.00 SLEC56***0IGED6 2543.00F Frame 4-Pole, 600 Volt, FXD6 BreakerF Frame 200% NeutralSLFC46***0FXD6 3855.00 SLFC56***0FXD6 4177.0070-225A SLFC46***0GFXD6 3946.00 70-200A SLFC56***0GFXD6 4281.00SLFC46***0IGFXD6 3992.00 SLFC56***0IGFXD6 4326.00SLFC462500FXD6 4538.00 SLFC56***0FXD6 4177.00250A SLFC462500GFXD6 4665.00 225-250A SLFC56***0GFXD6 4281.00SLFC462500IGFXD6 4901.00 SLFC56***0IGFXD6 4326.00J Frame 4-Pole, 600 Volt, JXD6 BreakerSLJC46***0JXD6 7940.00200-400A SLJC46***0GJXD6 8089.00SLJC46***0IGJXD6 8089.00L Frame 4-Pole, 600 Volt, LXD6 BreakerSLLCS46***0LXD6 10999.00450-600A SLLCS46***0GLXD6 11251.00SLLCS46***0IGLXD6 11382.00M Frame 4-Pole, 600 Volt, MXD6 BreakerSLMCS46***0MXD6 12972.00500-800A SLMCS46***0GMXD6 13343.00SLMCS46***0IGMXD6 13405.00E Frame 200% NeutralSLEC42***0ED2 1262.00 SLEC52***0ED2 1630.0015-60A SLEC42***0GED2 1367.00 15-60A SLEC52***0GED2 1734.00SLEC42***0IGED2 1411.00 SLEC52***0IGED2 1778.00SLEC42***0ED2 1262.00 SLEC52***0ED2 1630.0070-100A SLEC42***0GED2 1367.00 70-100A SLEC52***0GED2 1734.00SLEC42***0IGED2 1411.00 SLEC52***0IGED2 1778.00E Frame 4-Pole, 480 Volt, ED4 BreakerE Frame 200% Neutral15-60A SLEC44***0ED4 1520.00 SLEC54***0ED4 1927.00SLEC44***0GED4 1624.00 15-60A SLEC54***0GED4 2032.00SLEC44***0IGED4 1670.00 SLEC54***0IGED4 2078.0070-100A SLEC44***0ED4 1670.00 SLEC54***0ED4 2101.00SLEC44***0GED4 1773.00 70-100A SLEC54***0GED4 2203.00SLEC44***0IGED4 1819.00 SLEC54***0IGED4 2249.00110-125A SLEC44***0ED4 1869.00 SLEC54***0ED4 2229.00SLEC44***0GED4 1973.00 110-125A SLEC54***0GED4 2339.00SLEC44***0IGED4 2018.00 SLEC54***0IGED4 2386.00J Frame 200% NeutralSLJC562000JXD6 8275.00200A SLJC562000GJXD6 8379.00SLJC562000IGJXD6 8425.00SLJCS56***0JXD6 8833.00225-400A SLJCS56***0GJXD6 8939.00SLJCS56***0IGJXD6 8984.00Catalog ListDescription Number Price $Spring Kit SXSK 32.0014 BUSWAYSYSTEMS Replace “***” with breaker trip rating.Example: SLEC36060ED6, for 60A trip. All plugs shown have an IP40 rating, if IP54/55 is desiredsubstitute ”4” for ”0” in position 10 (or 11 for cradleplugs) and add the following charge:E Frame: $149. Ex. SLEC360604ED6F Frame: $353. Ex. SLFC360704FXD6J Frame: $913. Ex. SLJC36100JXD6L Frame: $960. Ex. SLLCS365004LXD6M Frame: $1046. Ex. SLMCS368004MXD6 For the following breaker charges, change the catalognumber suffix and add the appropriate charge:15-60A: HHED6 $624. Ex. SLEC36***0HHED670-100A: HHED6 $561. Ex. SLEC36***0HHED6110-125A: HHED6 $761. Ex. SLEC36***0HHED6F Frame: FD6 $446. Ex. SLFC36***0FD6F Frame: HFD6 $2777. Ex. SLFC36***0HFD6J Frame: JD6 $189. Ex. SLJC36***0JD6J Frame: HJD6 $2772. Ex. SLJC36***0HJD6L Frame: LD6 $189. Ex. SLLCS36***0LD6L Frame: HLD6 $2247. Ex. SLLCS36***0HLD6M Frame: MD6 $588. Ex. SLMCS36***0MD6M Frame: HMD6 $2247. Ex. SLMCS36***0HMD6 400A and larger bus plugs that require auxilary support.See also SXSK Spring Kit. Used on 400A and larger bus plugs that require auxilarysupport and that are mounted on vertical/riser busway. Kitcontains two springs (part number 32-9909-04). One kitrequired per bus plug.Discount Schedule BPLU Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-15

Sentron ® Bus PlugsBus Plugs with Current Limiting Circuit Breakers Selection14BUSWAYSYSTEMSAmpere Catalog ListRating Number Price $E Frame 3-Pole, 600 Volt, CED6 BreakerSLEL36***0CED6 4664.0015-60A SLEL36***0GCED6 4769.00SLEL36***0IGCED6 4813.00SLEL36***0CED6 4664.0070-100A SLEL36***0GCED6 4769.00SLEL36***0IGCED6 4813.00SLEL36***0CED6 4664.00110-125A SLEL36***0GCED6 4769.00SLEL36***0IGCED6 4813.00F Frame 3-Pole, 600 Volt, CFD6 BreakerSLFL36***0CFD6 8399.00100-225A SLFL36***0GCFD6 8504.00SLFL36***0IGCFD6 8550.00SLFL362500CFD6 8407.00250A SLFL362500CGFD6 8512.00SLFL362500ICGFD6 8557.00J Frame 3-Pole, 600 Volt, CJD6 BreakerSLJL36***0CJD6 12708.00200-400A SLJL36***0CGJD6 12812.00SLJL36***0ICGJD6 12858.00L Frame 3-Pole, 600 Volt, CLD6 BreakerSLLLS36***0CLD6 16688.00450-600A SLLLS36***0GCLD6 16940.00SLLLS36***0IGCLD6 17070.00Ampere Catalog List Ampere Catalog ListRating Number Price $ Rating Number Price $E Frame 4-Pole, 600 Volt, CED6 BreakerE Frame 200% NeutralSLEL46***0CED6 4821.00 SLEL56***0CED6 5373.0015-60A SLEL46***0GCED6 4926.00 15-60A SLEL56***0GCED6 5478.00SLEL46***0IGCED6 4971.00 SLEL56***0IGCED6 5522.00SLEL46***0CED6 4821.00 SLEL56***0CED6 5373.0070-100A SLEL46***0GCED6 4926.00 70-100A SLEL56***0GCED6 5478.00SLEL46***0IGCED6 4971.00 SLEL56***0IGCED6 5522.00SLEL46***0CED6 4821.00 SLEL56***0CED6 5373.00110-125A SLEL46***0GCED6 4926.00 110-125A SLEL56***0GCED6 5478.00SLEL46***0IGCED6 4971.00 SLEL56***0IGCED6 5522.00F Frame 4-Pole, 600 Volt, CFD6 BreakerF Frame 200% NeutralSLFL46***0CFD6 8508.00 SLFL56***0CFD6 8843.00100-225A SLFL46***0GCFD6 8613.00 70-200A SLFL56***0GCFD6 8948.00SLFL46***0IGCFD6 8658.00 SLFL56***0IGCFD6 8993.00SLFL462500CFD6 8843.00 SLFL56***0CFD6 8843.00250A SLFL462500GCFD6 8948.00 225-250A SLFL56***0GCFD6 8948.00SLFL462500IGCFD6 8993.00 SLFL56***0IGCFD6 8993.00J Frame 4-Pole, 600 Volt, CJD6 BreakerSLJL46***0CJD6 13347.00200-400A SLJL46***0GCJD6 13452.00SLJL46***0IGCJD6 13498.00L Frame 4-Pole, 600 Volt, CLD6 BreakerSLLLS46***0CLD6 17232.00450-600A SLLLS46***0GCLD6 17483.00SLLLS46***0IGCLD6 17613.00J Frame 200% NeutralSLJL562000CJD6 13786.00200A SLJL562000GCJD6 13832.00SLJL562000IGCJD6 13681.00SLJLS56***0CJD6 14241.00225-400A SLJLS56***0GCJD6 14346.00SLJLS56***0IGCJD6 14392.00 Replace “***” with breaker trip rating.Example: SLEC36060ED6, for 60A trip. All plugs shown have an IP40 rating, if IP54/55 isdesired, substitute ”4” for ”0” in position 10 (or 11 forcradle plugs) and add the following charge:E Frame: $149. Ex. SLEC360604ED6F Frame: $353. Ex. SLFC360704FXD6J Frame: $913. Ex. SLJC361004JXD6L Frame: $960. Ex. SLLCS365004LXD6M Frame:$1046. Ex. SLMCS368004MXD6 400A and larger bus plugs that require auxilary support.See also SXSK Spring Kit.14-16Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule BPLU

Sentron ®Busway SystemsFusible Cubicles, Molded Case Circuit Breaker CubiclesFusible Cubicles Solid State Molded Case Circuit Breaker Cubicles SelectionList Price $Ampere3-Pole, 600V 4-Pole, 480/277VRating IP40 IP40200 7800. 7925.400 8514. 10139.600 10942. 13066.800 16546. 17957.1200 20152. 22508.Molded Case Circuit Breaker Cubicles Power Circuit Breaker List Price $Breaker Ampere3-Pole, 600V 4-Pole, 480/277VFrame Rating IP40 IP40JD6 200–400 10708. 11138.LD6 300–600 16849. 17385.MD6 600–800 22828. 24043.ND6 800–1200 28844. 29540.PD6 1400–1600 33682. 34147.RD6 1800–2000 38269. 38841.AC Interrupting Capacity List Price $Breaker MaximumSymmetrical (RMS) Amperes With BreakerFrame Ampere 3-Phase,Size Rating 240 Volt 480 Volt 600 Volt 3-Pole 4-WireType RLRL-800 800 30,000 30,000 30,000 25828. 43495.RL-1600 1600 50,000 50,000 50,000 37361. 76130.RL-2000 2000 65,000 65,000 65,000 54090. 83086.RL-3200 3200 65,000 65,000 65,000 114720. 174007.RL-4000 4000 85,000 85,000 85,000 166200. 261011.Type RL (Fused)RLF-800 800 200,000 200,000 200,000 40149. 42165.RLF-3200 3200 200,000 200,000 200,000 68564. 70388.RLF-4000 4000 200,000 200,000 200,000 166516. 170280.Bolted Pressure SwitchesList Price $List Price $Breaker Ampere3-Pole, 600V 4-Pole, 480/277VFrame Rating IP40 IP40SJD6 8745. 9093.SJD6G200–40012329. 12709.SJD6NT 10873. 11251.SJD6NGT 14836. 15201.SLD6 13758. 14195.SLD6G300–60017125. 17562.SLD6NT 15784. 16192.SLD6NGT 19850. 20302.SMD6A 19530. 20491.SMD6AG600–80021788. 22707.SMD6ANT 19922. 20928.SMD6ANGT 21628. 22780.SND6A 25243. 25796.SND6AG800–120026263. 28085.SND6ANT 26059. 26627.SND6ANGT 29993. 30548.SPD6 27502. 27880.SPD6G1400–160027590. 27982.SPD6NT 29484. 24281.SPD6NGT 30840. 31232.Ampere480 Volt 600 VoltRating 3-Pole 4-Pole 3-Pole 4-Pole800 18245. 24396. 25156. 25625.1200 27475. 28135. 28832. 29529.1600 30048. 30974. 31594. 32495.2000 36778. 37856. 38616. 39769.2500 43596. 45041. 45763. 47297.3000 56168. 57867. 58982. 60832.4000 79120. 81933. 83075. 86040.14 BUSWAYSYSTEMS Fuses not included. For IP55 rating add 12% to list price. For electrically operated, specify control voltage.Discount Schedule BUSW Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-17

Sentron ®Meter CentersBusway SystemsMolded Case Circuit Breaker Cubicleswith Meter Tap Stack Provisions List Price $Busway L Frame Breaker N Frame BreakerAluminum Busway600A - 1200A 8503. 13030.1350A - 1600A 10150. 14677.2000A - 3000A 12346. 16871.Copper Busway800A - 1600A 9875. 14402.2000A 11796. 16323.2500A - 4000A 15912. 20439.5000A 18655. 23182.Meter Center Tap Stacks—IP40 SelectionList Price $3-Pole 3-Pole 4-Pole 4-PoleInternal Isolated Internal IsolatedAmps 3-Pole Ground Ground 4-Pole Ground Ground100 1005. 1122. 1194. 1355. 1456. 1618.200 1063. 1180. 1268. 1428. 1530. 1689.400 1106. 1223. 1326. 1501. 1602. 1777.600 1165. 1281. 1385. 1560. 1675. 1850.800 1210. 1339. 1443. 1631. 1748. 1861.1000 1268. 1398. 1501. 1705. 1821. 2011.1200 1311. 1456. 1560. 1763. 1894. 2097.Note: Prices do not include meter centers.BUSWAYSYSTEMS14 For IP55 rating add 12% to list price.For IP55 add 28% add to list price.14-18Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule BUSW

Busway SystemsNational Electric CodeI.General Requirements368.1 Scope. This article covers serviceentrance,feeder and branch-circuitbusways and associated fittings.368.2 Definition.Busway. A grounded metal enclosurecontaining factory-mounted, bare orinsulated conductors, which are usuallycopper or aluminum bars, rods or tubes.FPN: For cables, refer to article 370.II. Installation368.10 Uses Permitted. Busways shallbe permitted to be installed where theyare located in accordance with 368.10(A)through (C).(A) Exposed. Busways shall bepermitted to be located in the openwhere visible, except as permitted in368.10 (C).(B) Concealed. Busways shall bepermitted to be installed behind accesspanels, provided the busways are totallyenclosed, of non-ventilating-typeconstruction and installed so that thejoints between sections and at fittingsare accessible for maintenancepurposes. Where installed behind accesspanels, means of access shall beprovided and either of the followingconditions shall be met:(1) The space behind the access panelsshall not be used for air-handlingpurposes.(2) Where the space behind the accesspanels is used for environmental air,other than ducts and plenums, thereshall be no provisions for plug-inconnections and the conductors shall beinsulated.(C) Through walls and Floors.Busways shall be permitted to beinstalled through walls and floors inaccordance with (C)(1) and (C)(2).(1) Walls. Unbroken lengths of buswayshall be permitted to be extendedthrough dry walls.(2) Floors. Floor penetrations shallcomply with (a) and (b).(a) Busways shall be permitted to beextended vertically through dry floors iftotally enclosed (unventilated) wherepassing through and for a minimumdistance of 1.8m (6ft) above the floor toprovide adequate protection fromphysical damage.(b) In other than industrialestablishments, where a vertical riserpenetrates two or more dry floors, aminimum 100mm (4 in) high curb shallbe installed around all floor openings forriser busway to prevent liquids fromentering the opening. Electricalequipment shall be located so that it willnot be damaged by liquids that areretained by the curb.FPN: See 300.21 for informationconcerning the spread of fire or productsof combustion.368.12 Uses Not Permitted.(A) Physical Damage. Busways shallnot be installed where subject to severephysical damage or corrosive vapors.(B) Hoist ways. Busways shall not binstalled in Hoist ways.(C) Hazardous Locations. Buswaysshall not be installed in any hazardous(Classified) location, unless specificallyapproved for such use.FPN: See 501.10(B)(D) Wet Locations. Busway shall not beinstalled outdoors or in wet damplocations unless identified for such use.(E) Working Platform. Lighting buswayand trolley busway shall not be installedless than 2.5 m (8 ft) above the floor orworking platform unless provided with acover identified for the purpose.368.17 Over current Protection. Overcurrent protection shall be provided inaccordance with 368.17(A) through (D).(A) Rating of over current protection –Feeders. A busway shall be protectedagainst over current in accordance withthe allowable current rating of thebusway.Exception No. 1: The applicableprovisions of 240.4 shall be permitted.Exception No. 2: Where used astransformer secondary ties, theprovisions of 450.6(A)(3) shall bepermitted.(B) Reduction in Ampacity Size ofBusway. Over current protection shallbe required where busways are reducedin ampacity.Exception: For industrial establishmentsonly, omission of over current protectionshall be permitted at points wherebusway are reduced in ampacity,provided that the length of the buswayhaving the smaller ampacity does notexceed 15m(50ft) and has ampacity atleast equal to one-third the rating orsetting of the over current device nextback on the line, and provided that suchbusway is free from contact withcombustible material.(C) Feeder or Branch Circuits. Where abusway is used as a feeder, devices orplug-in connections for tapping offTechnicalfeeder or branch circuits from thebusway shall contain the over currentdevices required for the protection ofthe feeder or branch circuits. Theplug0in device shall consist of anexternally operable circuit breaker or anexternally operable fusible switch.Where such devices are mounted out ofreach and contain disconnecting means,suitable means such as ropes, chains orsticks shall be provided for operating thedisconnecting means from the floor.Exception No.1: As permitted in 240.21.Exception No. 2: For fixed or semi fixedluminaries (light fixtures), where thebranch circuit over current device is partof the luminaries (fixture) cord plug oncord-connected luminaries (fixtures).Exception No.3: Where luminaries(fixtures) without cords are plugged indirectly into busway and the over currentdevice is mounted on the luminaries(fixture).(D) Rating of Over Current Protection– Branch Circuits. A busway used as abranch circuit shall be protected againstover current in accordance with 210.20.368.30 Support. Busways shall besecurely supported at intervals notexceeding 1.5 m (5 ft) unless otherwisedesigned and marked.368.50 Branches from Busways.Branches from busways shall bepermitted to be made in accordancewith 368.56(A), (B) and (C).(A)General. Branches from buswaysshall be permitted to use any of thefollowing wiring methods:(1) Type AC Armored Cable(2) Type MC metal-clad Cable(3) Type MI mineral-insulated, metalsheathed cable(4) Type IMC intermediate metal conduit(5) Type RMC rigid metal conduit(6) Type FMC flexible metal conduit(7) Type LFMC liquid tight flexible metalconduit(8) Type RNC rigid nonmetallic conduit(9) Type LFNC liquid tight flexiblenonmetal conduit(10 Type EMT electrical metallic tubing(11) Type ENT electrical nonmetallictubing(12) Busways(13) Strut-type channel raceway(14) Surface Metal raceways(15) Surface nonmetallic raceways14 BUSWAYSYSTEMSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-19

14BUSWAYSYSTEMSBusway SystemsNational Electric CodeWhere a separate equipment groundingconductor is used, connection of theequipment grounding conductor to thebusway shall comply with 250.8 and250.12.(B) Cord and Cable Assemblies.Suitable cord and cable assembliesapproved for extra-hard usage and hardusage, and listed bus drop cable shall bepermitted as branches from the buswayfor the connection of portable equipmentor the connection of stationaryequipment to facilitate their interchangein accordance with 400.7 and 400.8 andthe following conditions:(1) The cord or cable shall be attached tothe building by the approved means.(2) The length of the cord or cable forma busway plug-in device to a suitabletension take-up support device shall notexceed 1.8 m (6 ft.).(3) The cord and cable shall not beinstalled as a vertical riser from thetension take-up support device to theequipment served.(4) Strain relief cable grips shall beprovided for the cord or cable at thebusway plug-in device and equipmentterminations.Exception to (B)(2): In industrialestablishments only, where theconditions of maintenance andsupervision ensure that only qualifiedpersons service the installation, lengthsexceeding 1.8 m (6 ft.) shall bepermitted between the busway plug-indevice and the tension take-up supportdevice where the cord or cable issupported at intervals not exceeding2.5 m (8 ft.).(C) Branches from Trolley-TypeBusways. Suitable cord and cableassemblies approved for extra-hard sageor hard-usage and listed bus drop cableshall be permitted as branches fromtrolley-type busways for the connectionof moveable equipment in accordancewith 400.7 and 400.8.368.58 Dead Ends. A dead end of abusway shall be closed.368.60 Grounding. Busway shall begrounded.III. Construction368.120 Marking. Busway shall bemarked with the voltage and currentrating for which they are designed andwith the manufacturers name ortrademark in such a manner as to bevisible after installation.IV. Requirements for over 600 Volts,Nominal368.214 Adjacent and SupportingStructures. Metal enclosed buswaysshall be installed so that temperaturerise from induced circulating currents inany adjacent metallic parts will not behazardous to personnel or constitute afire hazard.368.234 Barriers and Seals.(A) Vapor Seals. Busway runs that havesections located inside and outside of abuilding shall have a vapor seal at thebuilding wall to prevent interchange ofair between indoor and outdoor sections.Exception: Vapor seals shall not berequired in forced-cooled bus.(B) Fire Barriers. Fire barriers shall beprovided where fire walls, floors andceilings are penetrated.FPN: See 300.21 for informationconcerning the spread of fire or productsof combustion.368.236 Drain Facilities. Drain plugs,filter drains or similar methods shall beprovided to remove condensed moisturefrom low points on a busway run.368.237 Ventilated Bus Enclosures.Ventilated busway enclosures shall beinstalled in accordance with Article 110,Part III and 490.24.368.238 Terminations andConnections. Where bus enclosuresterminate at machines cooled byflammable gas, seal-off bushings, bafflesor other means shall be provided toprevent accumulation of flammable gasin the busway enclosures. All conductortermination and connection hardwareshall be accessible for installation,connection and maintenance.368.239 Switches. Switching devices ordisconnecting links provided in thebusway run shall have the samemomentary rating as the busway.Disconnecting links shall be plainlymarked to be removable only when thebus is de-energized. Switching devicesthat are not load-break shall beinterlocked to prevent operation underload and disconnecting link enclosuresshall be interlocked to prevent access toenergized parts.368.240 Wiring 600 Volts or Less,Nominal. Secondary control devices andwiring that are provided as part of themetal-enclosed bus run shall beinsulated by fire-retardant barriers fromall primary circuit elements with theTechnicalexception of short lengths of wire, suchas at instrument transformer terminals.368.244 Expansion Fittings. Flexible orexpansion connections shall be providedin long, straight runs of bus to allow fortemperature expansion or contraction orwhere the busway run crosses thebuilding vibration insulation joints.368.258 Neutral. Neutral bus, whererequired shall be sized to carry all neutralload current, including harmonic currentsand shall have adequate momentary andshort circuit rating consistent withsystem requirements.368.260 Grounding. Metal-enclosedbusway shall be grounded.368.320 Marking. Each busway runshall be provided with a permanentnameplate on which the followinginformation shall be provided:(1) Rated voltage.(2) Rated continuous current; if bus isforced-cooled, both the normal forcedcooledrating and the self-cooled (notforced-cooled) rating for the sametemperature rise shall be given.(3) Rated frequency.(4) Rated impulse withstand voltage.(5) Rated 60Hz withstand voltage (dry).(6) Rated momentary current.(7) Manufacturers name or trademark.FPN: See ANSI C37.23-1987(R1991),Guide for Metal enclosed Bus andCalculating Losses in Isolated-PhaseBus, for construction and testingrequirements for metal enclosed bus.14-20Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Busway SystemsSentron Busway OverviewOverviewSentron Busway for GlobalPower Distribution ApplicationsBuilding on a solid foundation ofadvanced products for the constructionindustry, the Siemens Sentron name isrecognized worldwide as synonymouswith quality and consistent performance.Sentron Busway delivers impressivefeatures and benefits that make it idealfor many types of industrial andconstruction implementations.Engineered to ensure the safe andefficient distribution of power inindustrial, commercial and institutionalenvironments world-wide, Sentronampacities range from 225A to 5000AUL and IEC. Thanks to an innovativedesign, you benefit from labor-savinginstallation and a flexible, compact bussystem that is an ideal fit for mostapplications. In fact, Sentron Busway isone of the industry's least laborintensivesystems.Sentron Busway installs with minimalhardware and often costs less thancable and conduit installations. Thelightweight aluminum housing acts as anintegral ground, joint stacks connectwith splice plates featuring a single-boltdesign, and bus plugs and cable tapboxes offer the industry's largest wirebending space. An optional 200%neutral within the bus bar housingaccommodates harmonics common intoday's power systems.Sentron Busway conductors areinsulated with a state-of-the-art epoxyinsulation system, which is applied usingan electrostatic spray process foroptimal insulation integrity.Exemplifying the spirit of continuinginnovation, Sentron Busway is nowavailable with economical andconvenient elbow stacks for changingleft, right, up or down directions at 90degrees.And, of course, Sentron Busway iscertified to design standards worldwide,including UL, NEMA, IEC, CSA, VDEand BS.Siemens Busway Business usesindustry leading technology in all itsmanufacturing processes. From bus barfabrication to Electrostatic Spray Epoxyinsulation, all the processes used in themanufacturing of Siemens SentronBusway are electronically controlled toprovide for consistent, high qualityresults, making Sentron Buswayproducts best in its class.HousingSentron Busway incorporates an allaluminum housing. This lightweighttotally enclosed, non-ventilated housingresists rust and other elements,distributes heat away from theconductors, and provides an excellentground path. The totally enclosed designalso eliminates the need for derating ofthe system regardless of installationorientation. The housing is covered withan electrostatically applied light grayANSI 61 polyester urethane powderpaint that is scratch resistant and has a1,000-hour salt spray resistance rating.ConductorsSentron Busway conductors have acompact construction and can beconfigured as 3-phase 3-wire, 3-phase4-wire or 3-phase 4-wire with 200%neutral. The conductors may be orderedin copper (98% conductivity), 1000A/in 2M-Rated Copper, Aluminum (58%conductivity) and 750A/in 2 L-RatedAluminum. The optional 200% neutralhelps to handle harmonic conditions thatmay exist. This system is especiallyuseful with discharge lighting(fluorescent) and computer installations.This will help to minimize overheatingand prolong the life cycle of your powerdistribution equipment.GroundSentron Busway offers ground optionsto meet your specifications: standardintegral aluminum housing ground andoptional internal grounding bars. Anoptional isolated ground is also availablewhich is especially useful in applicationswhere a clean ground is needed.PlatingAll bus bars are electroplated with tin.This unique tin plating provides excellentconductivity and resists outsideelements from attaching to the bars.Optional silver plating is also available.InsulationSentron Busway is insulated with anEpoxy Powder Coating system designedby Siemens Engineers, Epoxy SystemEngineers and Epoxy PowderSpecialists, specifically for SiemensBusway products.The Siemens exclusive ElectrostaticSpray insulation process producesuniform application of Epoxy powderover the entire conductor bar. This isfurther enhanced by the inline filterprocess and magnetic separator thathelps to eliminate contaminantscommon to fluidized bed systems. Theelectrostatic application also provides abetter coating consistency than that ofthe older fluidized bed process. Thecombination of electrostatic spray andlower oven temperatures produces aconsistent coverage with fewerimpurities and pinholes in the insulation.The lower oven temperatures reduce therisk of bar annealing, which affects theoverall quality of the system.Sentron Busway insulation is Class B,130°C Rated. Every bus bar andcompleted assembly is dielectriclytested to ensure the insulation is freeof defects.14 BUSWAYSYSTEMSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-21

14BUSWAYSYSTEMSBusway SystemsSentron Busway OverviewJoint StackEach Sentron Busway piece is shippedwith a joint stack and joint coversinstalled at one end of the busway and ashipping end protector at the other end.The joint stacks feature a single boltdesign and a special, torque indicating,double headed break-off bolt. Thiseliminates the need for torque wrenchesand assures proper torque at installationof 55 ft.-lbs.(68 N-m). When the propertorque value is achieved, the top bolthead will shear off. Each joint stackallows for +/- .625 inches (15.8mm)adjustability at each joint. Overadjustment is prevented by the jointcovers, which will only allow a .625 inch(15.8mm) adjustment when theknockouts on the joint cover areremoved. It is possible to remove anyjoint connection assembly to allowelectrical isolation or removal of abusway length without disturbingadjacent busway lengths. Isolation jointstacks are available and used toelectrically isolate a busway section(s)within a busway run. For easy visualidentification, isolation joint stackassemblies are painted white.Plug-in OpeningSentron Busway offer plug-in stylebusway which feature plug-in openingsrated for finger safety to IP2X inaccordance with IEC 529 and BS EN60439-1, -2 and BS EN 60529.Each plug-in opening has a reversiblehinged dead front designed to protectthe contact surfaces from dirt, dust ormoisture. Gasketing is used whereapplications require a splash proof(IP55) rating.IP RatingsSentron Busway is available in a varietyof IP ratings. Use the chart below todetermine the IP rating that best fitsyour application needs.TestingEach piece of Sentron Busway is factorytested before shipping. Tests performedinclude dielectric tests, which are usedto insure integrity of insulation. Inaddition, Sentron Busway is tested inaccordance with both UL and IECstandards. All Sentron Busway ismanufactured and inspected in an ISO9001:2000 registered facility.OverviewStandardsAll Sentron Busway products meet thefollowing standards:UL 857NEMA BU1CSA C22.2IEC 439-1(1993), IEC 439-2 (1993),IEC 529 (1989)BS EN 60529BS EN 60439-1, 60439-2UL 1479DIN 4102 Parts 9&12BS 6387 Parts 11.1 and 11.2Labor SavingsUsing Sentron Busway instead of cableand conduit can create savings of up to20 - 30% on total installed costs. Sentronbusway is lightweight, compact andtakes half the time to install as cable andconduit. Siemens Sentron Busway -Cable/Conduit Conversion SoftwareProgram will show you side by sidecomparisons of busway vs. cable/conduit.These comparisons include materialcosts, labor costs, bill of materials, andtechnical information between buswayand cable/conduit. Contact your localSiemens sales office to find out moreinformation, or visit our web site atwww.sea.siemens.com.Joint AssemblyPlug-In Opening and CoverLevels of Protection DescriptionCodeIP 2XDescriptionPlug-In outlet protects against access to live parts by .472 in. (12 mm) test probe, even with coveropened. Finger SafeSentron BuswayFeeder Plug-In• • •IP 40 Enclosure protects against entry of .039 in. (1.0 mm) test probe. Indoor (Typical UL Designation) • • •IP 55 Enclosure protects against entry of dust and water jets. Splash Proof • • •IP 66 Enclosure is dust tight and protects against powerful water jets. Outdoor (International Only) •NEMA 3R Enclosure protects against rain, sleet and damage from ice formation. Outdoor - NAFTA •Sentron Bus Plugs14-22Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Busway SystemsSentron Bus Plug OverviewOverviewSENTRON Bus Plugs are engineeredwith the installer and end user in mind.The installer will benefit from thenumerous features, such as factoryinstalled circuit breakers, compactfootprint, generous wirebend space, anddual interlocks. The end user willappreciate the visible position indicator,as well as the spring loaded pad lockablelatch which prevents access tounauthorized personel.SENTRON Bus Plugs are designed withan interlock device to prevent the doorfrom being opened when the disconnectis on. This also prevents the disconnectfrom being turned on while the door isopen. The interlock ensures that theprotective device is “OFF” prior toinstallation or removal of the bus plug.Once the bus plug is properly installed,a spring - loaded, padlock latch providesadditional security by preventingunauthorized access to the unit.Alignment and interlock stabs arefeatures of the Sentron Bus Plugsengineered to prevent improperinstallation of the unit. Guide stabsprevent installing the bus plug 180degrees out of rotation. In addition, thestabs provide vertical support for verticalapplications. The bus plug ground stabsare designed to ensure positive contactwith both the integral and optionalinternal busway grounds before the busplug fingers contact the phase andneutral bars. Sentron Bus Plugs alsofeature bolt-on mounting to the buswayhousing for secure attachment.Sentron Bus Plugs can be configured forhorizontal or vertical applications. Thefollowing Bus Plugs can be mounted(side by side) five (5) per busway sidechannel (Total 10 per 10' Section).▪ 30-600 SLVBH Fusible (Horizontal) ▪ 30-200 SLVBR Fusible (Riser) ▪ 30-400 Circuit Breaker Sentron SLVB Fusible Bus Plugs featurea direct drive mechanism. The operatinghandle mounts directly to the switchmechanism for fewer moving parts.Enclosure Ratings:▪ IP40▪ IP55Conductors:▪ 3-phase, 3-wire▪ 3-phase, 4-wire▪ 3-phase, 4-wire 200% neutral (400Aand below)Grounding:▪ Integral (Housing)▪ Internal▪ Isolated14 BUSWAYSYSTEMSNote: SLVBH Horizontal Application Shown. Contact Siemens for 200% Neutral Applications.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-23

Busway SystemsTechnical DataTechnicalBUSWAYSYSTEMS14R, X, Z and Ohms, Voltage DropVoltage Drop - Concentrated Loads, Line-to-Line per 100 feet at 100%Bus Bar Width Ohms x 10.3 per 100 feet Rated Load, 35°C Ambient x 0.25 in. Line to Neutral Power FactorAmpere Rating (6.4mm) Thick R X Z 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0AL L-Rated 225 — 1.75 (44.5) 3.94 1.13 4.10 0.88 1.02 1.15 1.27 1.39 1.49 1.57 1.54400 — 1.75 (44.5) 4.08 1.23 4.26 1.66 1.91 2.15 2.38 2.58 2.77 2.91 2.83600 — 1.75 (44.5) 4.26 1.32 4.46 2.64 3.03 3.40 3.75 4.08 4.37 4.58 4.43800 400 2.38 (60.5) 3.42 1.06 3.58 2.82 3.24 3.64 4.02 4.36 4.67 4.90 4.741000 600 3.25 (82.6) 2.45 0.74 2.56 2.50 2.88 3.24 3.57 3.89 4.17 4.38 4.241200 800 4.38 (111.3) 1.86 0.59 1.95 2.32 2.66 2.99 3.29 3.58 3.82 4.01 3.871350 1000 5.38 (138.7) 1.39 0.24 1.41 1.50 1.81 2.10 2.39 2.67 2.93 3.17 3.251600 1200 6.50 (165.1) 1.21 0.48 1.29 2.19 2.48 2.75 3.00 3.23 3.43 3.56 3.352000 1350,1600 8.75 (222.3) 0.91 0.35 0.98 2.11 2.38 2.64 2.87 3.08 3.26 3.37 3.162500 2000 (2) 5.63 (143.0) 0.68 0.29 0.74 2.09 2.34 2.57 2.78 2.97 3.12 3.21 2.953000 2500 (2) 6.75 (171.5) 0.54 0.28 0.61 2.24 2.47 2.67 2.85 3.01 3.12 3.16 2.803200 2000 (2) 7.50 (190.5) 0.48 0.33 0.58 2.53 2.73 2.91 3.06 3.17 3.23 3.20 2.684000 3000,3200 (2) 9.00 (228.6) 0.62 0.21 0.51 2.34 2.61 2.85 3.08 3.27 3.43 3.51 3.20CU M-Rated 225 — 1.75 (44.5) 2.34 1.13 2.60 0.69 0.77 0.84 0.90 0.95 0.99 1.01 0.91400 — 1.75 (44.5) 2.44 1.13 2.69 1.26 1.40 1.52 1.64 1.74 1.82 1.86 1.69600 — 1.75 (44.5) 2.58 1.16 2.83 1.96 2.18 2.39 2.58 2.74 2.87 2.94 2.68800 400 1.75 (44.5) 2.71 1.17 2.95 2.67 2.98 3.28 3.55 3.78 3.97 4.08 3.761000 — 2.25 (67.2) 2.12 0.98 2.30 2.58 2.88 3.17 3.44 3.67 3.86 3.98 3.671200 600 2.88 (73.2) 1.66 0.77 1.83 2.56 2.85 3.11 3.35 3.56 3.72 3.80 3.451350 800 3.50 (88.9) 1.30 0.64 1.45 2.34 2.59 2.82 3.03 3.20 3.33 3.39 3.041600 1000 4.50 (114.3) 1.06 0.56 1.20 2.37 2.60 2.66 3.01 3.17 3.29 3.32 2.942000 1200,1350 6.00 (152.4) 0.77 0.44 0.89 2.27 2.48 2.50 2.83 2.96 3.05 3.07 2.66— 1600 — — — — — — — — — — — —2500 2000 8.50 (215.9) 0.55 0.35 0.65 2.15 2.34 2.50 2.64 2.75 2.82 2.81 2.393000 — (2) 4.75 (120.7) 0.49 0.27 0.56 2.07 2.28 2.46 2.62 2.76 2.86 2.89 2.543200 — (2) 5.50 (139.7) 0.44 0.30 0.53 2.33 2.51 2.67 2.80 2.90 2.96 2.93 2.444000 2500,3000,3200 (2) 6.50 (165.1) 0.36 0.15 0.39 1.76 1.97 2.17 2.35 2.51 2.63 2.71 2.495000 4000 (2) 8.50 (215.9) 0.30 0.21 0.37 2.49 2.69 2.86 3.00 3.11 3.17 3.15 2.63Notes:1. For plug-in distributed loads, divide voltage dropvalues by 2.2. To determine voltage drop line-to-neutral, multiply lineto-linevalues by 0.577.3. Actual voltage drop for different lengths and atloadings less than full rated current can be calculatedusing the formula:Vd (actual) = Vd (table) x actual load x actual length (ft)rated load 100 feet4. For 50 Hz, multiply reactance (X) by 0.85 and resistancevalues do not change. For 400 Hz, multiply reactanceby 3.75 and multiply resistance by 1.4. Calculate newvoltage drop:Vd = amps load x 3(Rcos θ + X sin θ) per 100 ft,where cos θ = Power Factor.5. For metric conversion R, X, Z values ”in Ohms permeters Line to Neutral”R x .0328X x .0328Z x .03286. For metric conversion ”Line to Line per meter at 25° Cambient in mV/A/m” (Vd 32.8) / A Divide Vd by 2 fordistributed loads.7. Voltage Drop will decrease in lower ambienttemperature. Contact Siemens for Voltage Drop inother ambient conditions.14-24Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Busway SystemsTechnical DataGround CapacityTechnicalMin. CSA for SectionalEffective CurrentGround Bus Area 50% IntegralCarrying Capacity Grd. Circuit Characteristics under FaultBus Bar Bars per UL 857 Internal (Hsg.)of Housing Conditions Ohms x 103 per 100 ftWidth per Table 14 Ground Bar Ground % of % of Internal Ground Housing GroundAmpere Rating Inches (mm) Pole In2 (mm2) In2 (mm2) In2 (mm2) UL Req Phase Bar R X Z R X ZA L-Rated225 — 1.75 (44.5) 1 0.08 (53.5) 0.22 (141.1) 2.30 (1485.1) 1333 253 10.267 9.037 4.872 14.200 12.963 5.797400 — 1.75 (44.5) 1 0.17 (107.1) 0.22 (141.1) 2.30 (1485.1) 667 253 10.267 9.037 4.872 14.200 12.963 5.797600 — 1.75 (44.5) 1 0.17 (107.1) 0.22 (141.1) 2.30 (1485.1) 667 253 10.267 9.037 4.872 14.200 12.963 5.797800 400 2.38 (60.5) 1 0.17 (107.1) 0.30 (191.9) 2.40 (1550.1) 688 192 8.063 7.333 3.351 11.150 10.000 4.9321000 600 3.25 (82.6) 1 0.20 (126.5) 0.41 (262.1) 2.54 (1639.9) 607 147 7.208 6.628 2.833 9.202 8.442 3.6621200 800 4.38 (111.1) 1 0.23 (146.5) 0.55 (352.8) 2.72 (1756.6) 552 115 6.358 5.852 2.487 7.625 6.926 3.1891350 1000 5.38 (136.5) 1 0.29 (189.7) 0.67 (433.5) 2.88 (1859.8) 446 9 5.561 5.115 2.182 6.478 5.883 2.7131600 1200 6.50 (165.1) 1 0.29 (189.7) 0.81 (524.2) 3.06 (1975.4) 467 84 4.837 4.489 1.801 5.687 5.206 2.2892000 1350,1600 8.75 (222.3) 1 0.35 (227.7) 1.09 (705.6) 3.42 (2207.7) 425 69 3.735 3.467 1.390 4.565 4.267 1.6232500 2000 5.63 (142.9) 2 0.52 (332.3) 1.41 (907.3) 3.85 (2480.7) 320 59 3.169 2.955 1.145 4.129 3.837 1.5263000 2500 6.75 (171.5) 2 0.59 (380.0) 1.69 (1088.7) 4.20 (2711.9) 301 53 2.848 2.683 0.954 3.835 3.635 1.2213200 2000 7.50 (190.5) 2 0.81 (522.6) 1.88 (1209.7) 4.44 (2866.8) 229 51 2.648 2.493 0.894 3.614 3.428 1.1444000 3000,3200 9.00 (228.6) 2 0.81 (522.6) 2.25 (1451.6) 4.92 (3176.5) 250 50 2.446 2.339 0.715 3.500 3.378 0.916CU M-Rated225 — 1.75 (44.5) 1 0.05 (33.5) 0.22 (141.1) 2.30 (1485.1) 2128 261 7.380 6.330 3.803 11.338 10.083 5.183400 — 1.75 (44.5) 1 0.11 (67.7) 0.22 (141.1) 2.30 (1485.1) 1054 261 7.380 6.330 3.803 11.338 10.083 5.183600 — 1.75 (44.5) 1 0.11 (67.7) 0.22 (141.1) 2.30 (1485.1) 1054 261 7.380 6.330 3.803 11.338 10.083 5.183800 400 1.75 (44.5) 1 0.11 (67.7) 0.22 (141.1) 2.30 (1485.1) 1054 261 7.380 6.330 3.803 11.338 10.083 5.1831000 — 2.25 (57.2) 1 0.13 (85.2) 0.28 (181.5) 2.38 (1536.7) 860 207 6.715 5.993 3.029 10.194 9.191 4.4091200 600 2.88 (73.0) 1 0.18 (114.2) 0.36 (231.9) 2.48 (1601.8) 661 166 6.186 5.676 2.460 8.996 8.212 3.6741350 800 3.50 (88.9) 1 0.24 (152.3) 0.44 (282.3) 2.58 (1665.8) 510 140 5.704 5.267 2.188 8.000 7.492 2.8071600 1000 4.50 (114.3) 1 0.24 (152.3) 0.56 (362.9) 2.74 (1769.0) 534 113 4.719 4.323 1.893 7.411 6.880 2.7562000 1200,1350 6.00 (152.4) 1 0.29 (189.7) 0.75 (483.9) 2.98 (1923.8) 457 90 3.507 3.181 1.476 6.422 6.032 2.205— 1600 6.50 (165.1) 1 0.29 (189.7) 0.81 (524.2) 3.06 (1975.4) 467 84 4.837 4.489 1.801 5.687 5.206 2.2892500 2000 8.50 (215.9) 1 0.35 (227.7) 1.06 (685.5) 3.38 (2181.9) 421 70 2.294 2.020 1.087 3.072 5.419 1.7643000 — 4.75 (120.7) 2 0.41 (265.8) 1.19 (766.1) 3.56 (2290.0) 376 66 2.117 1.874 0.984 4.859 4.631 1.4703200 — 5.50 (139.7) 2 0.59 (380.0) 1.38 (887.1) 3.80 (2453.9) 277 60 1.938 1.691 0.947 4.353 4.129 1.3784000 2500,3000,3200 6.50 (165.1) 2 0.59 (380.0) 1.63 (1048.4) 4.12 (2660.3) 296 54 1.688 1.500 0.773 3.334 3.060 1.3235000 4000 8.50 (215.9) 2 0.71 (456.1) 2.13 (1371.0) 4.76 (3073.2) 278 50 1.360 1.218 0.606 1.989 1.783 0.88214 BUSWAYSYSTEMSNote: Bus bar thickness = .25 in. (6.4mm), Ground bar thickness = .125 in.(3.18mm)UL Short Circuit RatingsUL Series Connected with FuseMaximum Fuse Size for 200kARMS Symmetrical (kA)RMS Symmetrical RatingAmpere Rating 6 cycle 1 sec. 3 sec. Class R Class J & T Class LAL L-Rated225 — 85 28 16 600 600 J & T —400 — 85 28 16 600 600 J & T —600 — 85 28 16 600 600 J & T —800 400 100 47 27 — 800 T 12001000 600 100 50 29 — — 30001200 800 125 60 35 — — 30001350 1000 150 75 43 — — 30001600 1200 150 90 52 — — 30002000 1350,1600 150 110 64 — — 50002500 2000 200 130 75 — — 50003000 2500 200 160 92 — — —3200 2000 200 160 92 — — —4000 3000,3200 200 200 115 — — —CU M-Rated225 — 85 40 23 600 600 J & T —400 — 85 40 23 600 600 J & T —600 — 85 40 23 600 600 J & T —800 400 85 40 23 — 800 T 16001000 — 100 50 29 — — 30001200 600 100 65 38 — — 30001350 800 100 80 46 — — 30001600 1000 125 95 55 — — 40002000 1200,1350 150 115 66 — — 5000— 1600 150 90 52 — — 30002500 2000 150 130 75 — — 50003000 — 200 175 101 — — —3200 — 200 175 101 — — —4000 2500,3000,3200 200 200 115 — — —5000 4000 200 200 115 — — —Sentron Busway has ULapproved Series Ratings. Byusing the appropriate line sidefuse, short circuit ratings can beenhanced to 200kA for loweramperage busway.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-25

14BUSWAYSYSTEMSBusway SystemsStraight Sections—Plug-In, Riser and FeederStraight SectionsSentron Busway can be ordered withAluminum or Copper bus bars.Aluminum bars are available in 225-4000ampere sections. Copper bars areavailable in 225-5000 ampere sections.Sentron Busway includes an integralhousing ground, and is available with aninternal ground bar or an isolated groundbar in all ampere ratings. SentronBusway housing is a four-piecealuminum design.Plug-In SectionsSentron plug-in sections are designedwith plug-in openings centered on 24 in.(610mm) intervals, and are located onboth sides of the busway for optimumutilization. Plug-in sections are availablein standard lengths of 4 ft. (1.22m), 6 ft.(1.83m), 8 ft. (2.44m) and 10 ft. (3.05m).Sentron plug-in sections meet IP40(indoor) and IP55 (splash proof)requirements. One joint stack assemblyis provided with each plug-in section.Riser SectionsSentron Riser sections are designedwith plug-in openings centered on 24 in.(610mm) intervals on one side of thebusway only. This eliminates unusableplug-in outlets in vertical applications.Riser busway is available in standardlengths of 4 ft. (1.22m), 6 ft. (1.83m), 8ft. (2.44m) and 10 ft. (3.05m). SentronRiser Busway is available in IP40 (indoor)and IP55 (splash proof). One joint stackassembly is provided with each risersection.Plug-In Outlet FeaturesThe plug-in outlet molded guard designprevents incidental finger contact withlive conductors. Sentron plug-in outletsSelectionare IP 2X rated (with the outlet coveropen) which means a .472 in. (12mm) orlarger probe is unable to enter a plug-inoutlet. The outlet is IP40 Rated with thecover closed and IP55 Rated whenconfigured with gaskets.Feeder SectionsFeeder busway carries the current of thebusway system from the supply source.Feeder busway does not have plug-inoutlets. Sentron Feeder busway isavailable in custom lengths from 2 ft.(.61m) to 10 ft. (3.05m). Feeder sectionsare rated as IP40 (Indoor), IP55 (SplashProof), NEMA 3R (Outdoor), and IP66(Severe Outdoor). One joint stackassembly is provided with each feedersection.Standard Plug-In Section (Standard plug-in outlets on both sides on 24 in. centers)Suffix PL04 (4 ft.), PL06 (6 ft.), PL08 (8 ft.), PL10 (10 ft.)Standard Riser Section (Standard Plug-In outlets on one side on 24 in. centers)Suffix RI04 (4 ft.), RI06 (6 ft.), RI08 (8 ft.), RI10 (10 ft.)Standard Feeder SectionSuffix F024 - 120 (last 3 digits = length in Inches, 024=24 in., 120=120 in.)14-26Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Busway SystemsSentron Busway, Widths and WeightsSelectionApproximate Weight - lbs per ft. (kg per meter)3Ø, 4-Wire3Ø, 3-Wire 3Ø, 4-Wire 3Ø, 4-Wire 200% NeutralDimension with Internal with Internal 200% with InternalAmpere Rating Inches (mm) 3Ø, 3-Wire Ground 3Ø, 4-Wire Ground Neutral GroundAL L-Rated225 — “W1” 3.9 (99) 5 (8) 5 (8) 6 (9) 6 (9) 7 (10) 7 (10)400 — “W1” 3.9 (99) 5 (8) 5 (8) 6 (9) 6 (9) 7 (10) 7 (10)600 — “W1” 3.9 (99) 5 (8) 5 (8) 6 (9) 6 (9) 7 (10) 7 (10)800 400 “W1” 4.6 (117) 6 (9) 6 (9) 7 (10) 7 (10) 7 (11) 8 (11)1000 600 “W1” 5.4 (137) 7 (10) 7 (11) 8 (12) 8 (12) 9 (13) 9 (14)1200 800 “W1” 6.6 (168) 8 (12) 9 (13) 9 (14) 10 (15) 11 (16) 11 (17)1350 1000 “W1” 7.6 (193) 9 (13) 10 (15) 11 (16) 11 (17) 12 (18) 13 (19)1600 1200 “W1” 8.7 (221) 10 (15) 11 (17) 12 (18) 13 (19) 14 (21) 15 (22)2000 1250,1600 “W1” 10.9 (277) 13 (19) 14 (21) 15 (23) 16 (24) 18 (26) 19 (28)2500 2000 “W2” 13.7 (348) 15 (22) 17 (25) 8 (27) 20 (30) 22 (33) 23 (34)3000 2500 “W2” 15.8 (402) 17 (25) 19 (28) 21 (31) 23 (34) 25 (37) 27 (40)3200 2000 “W2” 17.3 (439) 18 (27) 20 (30) 23 (34) 25 (37) 27 (40) 29 (43)4000 3000,3200 “W2” 20.3 (516) 22 (33) 25 (37) 27 (40) 30 (44) 32 (48) 35 (52)CU M-Rated225 — “W1” 3.9 (99) 9 (13) 10 (14) 10 (16) 11 (17) 12 (18) 13 (19)400 — “W1” 3.9 (99) 9 (13) 10 (14) 10 (16) 11 (17) 12 (18) 13 (19)600 — “W1” 3.9 (99) 9 (13) 10 (14) 10 (16) 11 (17) 12 (18) 13 (19)800 400 “W1” 3.9 (99) 9 (13) 10 (14) 10 (16) 11 (17) 12 (18) 13 (19)1000 — “W1” 4.4 (112) 10 (15) 11 (17) 12 (19) 14 (20) 15 (22) 16 (23)1200 600 “W1” 5.1 (130) 12 (18) 14 (20) 15 (23) 16 (24) 18 (26) 19 (29)1350 800 “W1” 5.7 (145) 14 (21) 16 (24) 17 (26) 19 (29) 21 (31) 23 (34)1600 1000 “W1” 6.7 (170) 17 (26) 19 (29) 22 (32) 24 (35) 26 (38) 28 (42)2000 1200,1350 “W1” 8.2 (208) 22 (32) 25 (37) 28 (41) 30 (45) 33 (50) 36 (54)— 1600 “W1” 10.9 (277) 13 (19) 14 (21) 5 (23) 16 (24) 18 (26) 19 (28)2500 2000 “W1” 10.7 (272) 30 (44) 34 (50) 38 (56) 42 (62) 46 (68) 50 (74)3000 — “W2” 11.8 (300) 33 (49) 37 (55) 42 (63) 47 (70) 51 (76) 56 (83)3200 — “W2” 13.3 (335) 37 (55) 2 (63) 48 (72) 53 (79) 58 (86) 64 (95)4000 2500,3000,3200 “W2” 15.3 (389) 43 (64) 50 (75) 56 (83) 62 (92) 68 (101) 75 (112)5000 4000 “W2” 19.3 (491) 56 (83) 4 (95) 72 (107) 80 (119) 89 (132) 97 (145)14 BUSWAYSYSTEMSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-27

14BUSWAYSYSTEMSBusway SystemsElbowsSentron Busway elbows provide a simple, convenientmethod of changing the direction (left, right, up ordown) of a busway run. Two elbow styles are offered:elbow stack and elbow section.Flatwise Elbow Stacks, Dimensions (standard/min.)Dimensions Inches (mm)Ampere Rating“A”AL L-Rated225 — 1.00 (25)400 — 1.00 (25)600 — 1.00 (25)800 400 1.12 (281000 600 2.00 (51)1200 800 2.50 (64)1350 1000 3.00 (76)1600 1200 3.50 (89)2000 1350,1600 4.62 (117)2500 2000 5.75 (146)3000 2500 7.00 (178)3200 2000 7.75 (197)4000 3000,3200 9.35 (237)CU M-Rated225 — 1.00 (25)400 — 1.00 (25)600 — 1.00 (25)800 400 1.00 (25)1000 — 1.12 (28)1200 600 .25 (33)1350 800 2.00 (50)1600 1000 2.50 (64)2000 1200,1350 3.25 (83)— 1600 4.62 (117)2500 2000 4.50 (114)3000 — 5.00 (127)3200 — 5.75 (146)4000 2500,3000,3200 6.75 (171)5000 4000 8.87 (225)Note: Flatwise elbow stacks can be ordered as either right-hand (ESFR) or lefthand(ESFL) to follow the same nomen-clature as an elbow section. Theconstruction is identical and interchangeable.SelectionFlatwise Elbow StacksFlatwise elbow stacks are used for left and right directionalchanges. When the busway system is mounted flatwise in thehorizontal plane (bus bars run parallel to the floor).FlatSuffix ESFR/ESFLEdgewise Elbow Stacks, Dimensions (standard/min.)Dimensions Inches (mm)Ampere Rating“A”AL L-Rated225 — 4.25 (108)400 — 4.25 (108)600 — 4.25 (108)800 400 4.25 (108)1000 600 4.25 (108)1200 800 4.25 (108)1350 1000 4.25 (108)1600 1200 4.25 (108)2000 1350,1600 4.25 (108)2500 2000 4.25 (108)3000 2500 4.25 (108)3200 2000 4.25 (108)CU M-Rated225 — 4.25 (108)400 — 4.25 (108)600 — 4.25 (108)800 400 4.25 (108)1000 — 4.25 (108)1200 600 4.25 (108)1350 800 4.25 (108)1600 1000 4.25 (108)2000 1200,1350 4.25 (108)— 1600 4.25 (108)2500 2000 4.25 (108)3000 — 4.25 (108)3200 — 4.25 (108)4000 2500,3000,3200 4.25 (108)5000 4000 4.25 (108)Note: Edge up and edge down elbow stacks are not interchangeable.Edgewise Elbow StacksEdgewise elbow stacks create up and down directional changes.The “A” phase is on the inside of the bend for edge up elbowstacks. The “A” phase is on the outside of the bend for edge downelbow stacks.Edge DownSuffix ESEDEdge UpSuffix ESEU14-28Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Busway SystemsElbowsFlatwise Elbow Sections, Dimensions (standard/min.)Dimensions Inches (mm)Ampere Rating “A” ”B”AL L-Rated225 — 12 (305) 12 (305)400 — 12 (305) 12 (305)600 — 12 (305) 12 (305)800 400 12 (305) 12 (305)1000 600 12(305) 12 (305)1200 800 12 (305) 12 (305)1350 1000 12 (305) 12 (305)1600 1200 18 (457) 18 (457)2000 1350,1600 18 (457) 18 (457)2500 2000 18 (457) 18 (457)3000 2500 18 (457) 18 (457)3200 2000 18 (457) 18 (457)4000 3000,3200 24 (610) 24 (610)CU M-Rated225 — 12 (305) 12 (305)400 — 12 (305) 12 (305)600 — 12 (305) 12 (305)800 400 12 (305) 12 (305)1000 — 12 (305) 12 (305)1200 600 12 (305) 12 (305)1350 800 12 (305) 12 (305)1600 1000 12 (305) 12 (305)2000 1200,1350 12 (305) 12 (305)— 1600 12 (305) 12 (305)2500 2000 12 (305) 12 (305)3000 — 12 (305) 12 (305)3200 — 12 (305) 12 (305)4000 2500,3000,3200 12 (305) 12 (305)5000 4000 12 (305) 12 (305)SelectionFlatwise Elbow SectionsFlatwise elbow sections are used for left and right directionalchanges when the busway system is mounted in the horizontal plane(bus bars run parallel to the floor). The joint stack assembly may bemoved to the opposite leg to change the orientation from left toright/right to left.Flat LeftSuffix ELEFFlat RightSuffix ELFR14 BUSWAYSYSTEMSEdgewise Elbow Sections, Dimensions (standard/min.)Dimensions Inches (mm)Ampere Rating “A” ”B”AL L-Rated225 — 10 (254) 10 (254)400 — 10 (254) 10 (254)600 — 10 (254) 10 (254)800 400 10 (254) 10 (254)1000 600 10 (254) 10 (254)1200 800 10 (254) 10 (254)1350 1000 10 (254) 10 (254)1600 1200 10 (254) 10 (254)2000 1350,1600 10 (254) 10 (254)2500 2000 10 (254) 10 (254)3000 2500 10 (254) 10 (254)3200 2000 10 (254) 10 (254)4000 3000,3200 10 (254) 10 (254)CU M-Rated225 — 10 (254) 10 (254)400 — 10 (254) 10 (254)600 — 10 (254) 10 (254)800 400 10 (254) 10 (254)1000 — 10 (254) 10 (254)1200 600 10 (254) 10 (254)1350 800 10 (254) 10 (254)1600 1000 10 (254) 10 (254)2000 1200,1350 10 (254) 10 (254)— 1600 10 (254) 10 (254)2500 2000 10 (254) 10 (254)3000 — 10 (254) 10 (254)3200 — 10 (254) 10 (254)4000 2500,3000,3200 10 (254) 10 (254)5000 4000 10 (254) 10 (254)Note : Odd angle elbow flatwise and edgewise elbow sections are availablefor angles 95° - 175° in 5° increments.Edgewise Elbow SectionsEdgewise elbow sections create up and down directional changes.The “A”phase bus bar lies on the inside of the bend for edge upelbows. The “A” phase bus bar lies on the outside of the bend foredge down elbows. The joint stack assembly on edgewise elbowscan not be moved in order to change orientation from up todown/down to up. Sentron Busway elbow sections are shipped witha joint stack assembly on one end for direct connection to thebusway system.Edge UpSuffix ELEUEdge DownSuffix ELEDSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-29

Busway SystemsOffsetsOffsets can be utilized to solve difficult contourproblems and save space. In applications where spacedoes not allow for two connected elbows, a singleoffset can bypass an obstruction. All offsets aresupplied with one joint stack assembly.Selection14BUSWAYSYSTEMSFlatwise Offsets, Dimensions (standard/min.)Dimensions Inches (mm)Ampere Rating *“A” ”B” ”C”AL L-Rated225 — 12 (305) 5 (127) 12 (305)400 — 12 (305) 5 (127) 12 (305)600 — 12 (305) 5 (127) 12 (305)800 400 12 (305) 5 (127) 12 (305)1000 600 12 (305) 5 (127) 12 (305)1200 800 12 (305) 5 (127) 12 (305)1350 1000 12 (305) 5 (127) 12 (305)1600 1200 18 (457) 5 (127) 18 (457)2000 1350,1600 18 (457) 5 (127) 18 (457)2500 2000 18 (457) 5 (127) 18 (457)3000 2500 18 (457) 5 (127) 18 (457)3200 2000 18 (457) 5 (127) 18 (457)4000 3000,3200 24 (610) 8 (203) 24 (610)CU M-Rated225 — 12 (305) 5 (127) 12 (305)400 — 12 (305) 5 (127) 12 (305)600 — 12 (305) 5 (127) 12 (305)800 400 12 (305) 5 (127) 12 (305)1000 — 12 (305) 5 (127) 12 (305)1200 600 12 (305) 5 (127) 12 (305)1350 800 12 (305) 5 (127) 12 (305)1600 1000 12 (305) 5 (127) 12 (305)2000 1200,1350 12 (305) 5 (127) 12 (305)— 16002500 2000 18 (457) 5 (127) 18 (457)3000 — 18 (457) 5 (127) 18 (457)3200 — 18 (457) 5 (127) 18 (457)4000 2500,3000,3200 18 (457) 5 (127) 18 (457)5000 4000 24 (610) 8 (203) 24 (610)Flat RightSuffix OFFRFlat LeftSuffix OFFLEdgewise Offsets, Dimensions (standard/min.)Dimensions Inches (mm)Ampere Rating *“A” ”B” ”C”AL L-Rated225 — 10 (254) 6 (152) 10 (254)400 — 10 (254) 6 (152) 10 (254)600 — 10 (254) 6 (152) 10 (254)800 400 10 (254) 6 (152) 10 (254)1000 600 10 (254) 6 (152) 10 (254)1200 800 10 (254) 6 (152) 10 (254)1350 1000 10 (254) 6 (152) 10 (254)1600 1200 10 (254) 6 (152) 10 (254)2000 1350,1600 10 (254) 6 (152) 10 (254)2500 2000 10 (254) 6 (152) 10 (254)3000 2500 10 (254) 6 (152) 10 (254)3200 2000 10 (254) 6 (152) 10 (254)4000 3000,3200 10 (254) 6 (152) 10 (254)CU M-Rated225 — 10 (254) 6 (152) 10 (254)400 — 10 (254) 6 (152) 10 (254)600 — 10 (254) 6 (152) 10 (254)800 400 10 (254) 6 (152) 10 (254)1000 — 10 (254) 6 (152) 10 (254)1200 600 10 (254) 6 (152) 10 (254)1350 800 10 (254) 6 (152) 10 (254)1600 1000 10 (254) 6 (152) 10 (254)2000 1200,1350 10 (254) 6 (152) 10 (254)— 1600 10 (254) 6 (152) 10 (254)2500 2000 10 (254) 6 (152) 10 (254)3000 — 10 (254) 6 (152) 10 (254)3200 — 10 (254) 6 (152) 10 (254)4000 2500,3000,3200 10 (254) 6 (152) 10 (254)5000 4000 10 (254) 6 (152) 10 (254)*Note: Leg Dimensions A and C have been reversed from prior publications.Edge UpSuffix OFEUEdge DownSuffix OFED14-30Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Busway SystemsCombinationsSelectionCombinations are used to create edge to flat and flatto edge changes in the busway run. One joint stackassembly is shipped with combination.Flat Right - Edge UpSuffix CORUFlat Left - Edge UpSuffix COLUSee drawings for minimum dimensions. ConsultBusway Order Service for information on customlengths.Combinations, Dimensions (standard/min.)Dimensions Inches (mm)Ampere Rating *“A” ”B” ”C”AL L-Rated225 — 10 (254) 8 (203) 12 (305)400 — 10 (254) 8 (203) 12 (305)600 — 10 (254) 8 (203) 12 (305)800 400 10 (254) 8 (203) 12 (305)1000 600 10 (254) 8 (203) 12 (305)1200 800 10 (254) 8 (203) 12 (305)1350 1000 10 (254) 8 (203) 12 (305)1600 1200 10 (254) 12 (305) 18 (457)2000 1350,1600 10 (254) 12 (305) 18 (457)2500 2000 10 (254) 12 (305) 18 (457)3000 2500 10 (254) 12 (305) 18 (457)3200 2000 10 (254) 12 (305) 18 (457)4000 3000,3200 10 (254) 16 (406) 24 (610)CU M-Rated225 — 10 (254) 8 (203) 12 (305)400 — 10 (254) 8 (203) 12 (305)600 — 10 (254) 8 (203) 12 (305)800 400 10 (254) 8 (203) 12 (305)1000 — 10 (254) 8 (203) 12 (305)1200 600 10 (254) 8 (203) 12 (305)1350 800 10 (254) 8 (203) 12 (305)1600 1000 10 (254) 8 (203) 12 (305)2000 1200,1350 10 (254) 8 (203) 12 (305)— 1600 10 (254) 12 (305) 18 (457)2500 2000 10 (254) 12 (305) 18 (457)3000 — 10 (254) 12 (305) 18 (457)3200 — 10 (254) 12 (305) 18 (457)4000 2500,3000,3200 10 (254) 12 (305) 18 (457)5000 4000 10 (254) 16 (406) 24 (610)Edge Up - Flat LeftSuffix COULFlat Right - Edge DownSuffix CORDEdge Up - Flat RightSuffix COURFlat Left - Edge DownSuffix COLD14 BUSWAYSYSTEMS*Note: Leg Dimensions A and C have been reversed from prior publications.Edge Down - Flat LeftSuffix CODLEdge Down - Flat RightSuffix CODRSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-31

Busway SystemsTeesTees are used to simplify directional and planeorientation changes in a busway system. Tees canmake 90° bends left or right, and up and down alongthe busway run. All tees are supplied with two jointstack assemblies.Selection14BUSWAYSYSTEMSFlatwise Tees, Dimensions (standard/min.)Dimensions Inches (mm)Ampere Rating“A”, ”B”, ”C”AL L-Rated225 — 12 (305)400 — 12 (305)600 — 12 (305)800 400 12 (305)1000 600 12 (305)1200 800 12 (305)1350 1000 12 (305)1600 1200 18 (457)2000 1350,1600 18 (457)2500 2000 18 (457)3000 2500 18 (457)3200 2000 18 (457)4000 3000,3200 24 (610)CU M-Rated225 — 12 (305)400 — 12 (305)600 — 12 (305)800 400 12 (305)1000 — 12 (305)1200 600 12 (305)1350 800 12 (305)1600 1000 12 (305)2000 1200,1350 12 (305)— 1600 18 (457)2500 2000 18 (457)3000 — 18 (457)3200 — 18 (457)4000 2500,3000,3200 18 (457)5000 4000 24 (610)Flatwise TeesFlatwise tees are used to create left and right branches.Flat RightSuffix TEFRFlat LeftSuffix TEFLEdgewise Tees, Dimensions (standard/min.)Dimensions Inches (mm)Ampere Rating“D”AL L-Rated225 — 13 (330)400 — 13 (330)600 — 13 (330)800 400 13 (330)1000 600 13 (330)1200 800 18 (457)1350 1000 18 (457)1600 1200 18 (457)2000 1350,1600 18 (457)2500 2000 27 (686)3000 2500 27 (686)3200 2000 27 (686)4000 3000,3200 29 (737)CU M-Rated225 — 13 (330)400 — 13 (330)600 — 13 (330)800 400 13 (330)1000 — 13 (330)1200 600 13 (330)1350 800 13 (330)1600 1000 18 (457)2000 1200,1350 18 (457)— 1600 18 (457)2500 2000 18 (457)3000 — 27 (686)3200 — 27 (686)4000 2500,3000,3200 27 (686)5000 4000 29 (737) 12.0" (305mm) For Isolated Ground.Edgewise TeesEdgewise tees are used to create branches that stem up or downfrom the busway run.Edge UpSuffix TEEUEdge DownSuffix TEED14-32Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Busway SystemsEnd Tap BoxesEnd tap boxes are non-fusible devices used to connect cable and conduit to the end of abusway run or where busway runs connect without the need for over-current protection. Endtap boxes may be installed at the end or beginning of a run. Vertical end tap boxes andhorizontal end tap boxes can be installed in both horizontal and vertical applications. Extendedend tap boxes are available if the application requires additional wire bending space. One jointstack assembly is shipped with each end tap box.Standard and Extended Horizontal End Tap Boxes, DimensionsCable LugsDimensions Inches (mm) Wire Bend Space Per Phase & Neutral GroundAmpere Rating "A" "B" Std. "B" Ext. "C" Std. "C" Ext. Qty. Size Lugs AL L-Rated225 — 13 (330) 30 (762) 34 (863) 17 (432) 21 (533) 1 1400 — 13 (330) 30 (762) 34 (863) 17 (432) 21 (533) 1 1600 — 13 (330) 30 (762) 34 (863) 17 (432) 21 (533) 2 1800 400 13 (330) 30 (762) 34 (863) 17 (432) 21 (533) 3 11000 600 13 (330) 30 (762) 34 (863) 17 (432) 21 (533) 4 11200 800 18 (457) 32 (813) 37 (940) 20 (508) 24 (610) 4 11350 1000 18 (457) 33 (838) 37 (940) 20 (508) 24 (610) 4 11600 1200 18 (457) 33 (838) 37 (940) 20 (508) 24 (610) 6 22000 1350,1600 18 (457) 33 (838) 37 (940) 20 (508) 24 (610) 6 22500 2000 27 (686) 33 (838) 37 (940) 20 (508) 24 (610) 8 23000 2500 27 (686) 33 (838) 37 (940) 20 (508) 24 (610) 9 23200 2000 27 (686) 33 (838) 37 (940) 20 (508) 24 (610) 9 24000 3000,3200 29 (737) 33 (838) 37 (940) 20 (508) 24 (610) 12 3CU M-Rated225 — 13 (330) 30 (762) 34 (863) 17 (432) 21 (533) 1 1400 — 13 (330) 30 (762) 34 (863) 17 (432) 21 (533) 1 1600 — 13 (330) 30 (762) 34 (863) 17 (432) 21 (533) 2 1800 400 13 (330) 30 (762) 34 (863) 17 (432) 21 (533) 3 11000 — 13 (330) 30 (762) 34 (863) 17 (432) 21 (533) 4 11200 600 13 (330) 33 (838) 37 (940) 20 (508) 24 (610) 4 11350 800 13 (330) 33 (838) 37 (940) 20 (508) 24 (610) 4 11600 1000 18 (457) 33 (838) 37 (940) 20 (508) 24 (610) 5 12000 1200,1350 18 (457) 33 (838) 37 (940) 20 (508) 24 (610) 6 2— 1600 18 (457) 33 (838) 37 (940) 20 (508) 24 (610) 5 12500 2000 18 (457) 33 (838) 37 (940) 20 (508) 24 (610) 8 23000 — 27 (686) 33 (838) 37 (940) 20 (508) 24 (610) 9 23200 — 27 (686) 33 (838) 37 (940) 20 (508) 24 (610) 9 24000 2500,3000,3200 27 (686) 33 (838) 37 (940) 20 (508) 24 (610) 12 35000 4000 29 (737) 33 (838) 37 (940) 20 (508) 24 (610) 15 4SelectionHorizontal End Tap BoxSuffix ETHS (Standard)Suffix ETHX (Extended)14 BUSWAYSYSTEMSStandard and Extended Vertical End Tap Boxes, DimensionsCable LugsDimensions Inches (mm) Wire Bend Space Per Phase & Neutral GroundAmpere Rating "A" "B" Std. "B" Ext. "C" Std. "C" Ext. Qty. Size Lugs AL L-Rated225 — 13 (330) 25 (635) 29 (737) 17 (432) 21 (533) 1 1400 — 13 (330) 25 (635) 29 (737) 17 (432) 21 (533) 1 1600 — 13 (330) 25 (635) 29 (737) 17 (432) 21 (533) 2 1800 400 13 (330) 25 (635) 29 (737) 17 (432) 21 (533) 3 11000 600 13 (330) 25 (635) 29 (737) 17 (432) 21 (533) 4 11200 800 18 (457) 32 (813) 32 (813) 20 (508) 24 (610) 4 11350 1000 18 (457) 28 (711) 32 (813) 20 (508) 24 (610) 4 11600 1200 18 (457) 28 (711) 32 (813) 20 (508) 24 (610) 6 22000 1350,1600 18 (457) 28 (711) 32 (813) 20 (508) 24 (610) 6 22500 2000 27 (686) 28 (711) 32 (813) 20 (508) 24 (610) 8 23000 2500 27 (686) 28 (711) 32 (813) 20 (508) 24 (610) 9 23200 2000 29 (737) 28 (711) 32 (813) 20 (508) 24 (610) 9 24000 3000,3200 29 (737) 28 (711) 32 (813) 20 (508) 24 (610) 12 3CU M-Rated225 — 13 (330) 25 (635) 29 (737) 17 (432) 21 (533) 1 1400 — 13 (330) 25 (635) 29 (737) 17 (432) 21 (533) 1 1600 — 13 (330) 25 (635) 29 (737) 17 (432) 21 (533) 2 1800 400 13 (330) 25 (635) 29 (737) 17 (432) 21 (533) 3 11000 — 13 (330) 25 (635) 29 (737) 17 (432) 21 (533) 4 11200 600 13 (330) 28 (711) 32 (813) 20 (508) 24 (610) 4 11350 800 13 (330) 28 (711) 32 (813) 20 (508) 24 (610) 4 11600 1000 18 (457) 28 (711) 32 (813) 20 (508) 24 (610) 5 12000 1200,1350 18 (457) 28 (711) 32 (813) 20 (508) 24 (610) 6 2— 1600 18 (457) 28 (711) 32 (813) 20 (508) 24 (610) 5 12500 2000 18 (457) 28 (711) 32 (813) 20 (508) 24 (610) 8 23000 — 27 (686) 28 (711) 32 (813) 20 (508) 24 (610) 9 23200 — 27 (686) 28 (711) 32 (813) 20 (508) 24 (610) 9 24000 2500,3000,3200 27 (686) 28 (711) 32 (813) 20 (508) 24 (610) 12 35000 4000 29 (737) 28 (711) 32 (813) 20 (508) 24 (610) 15 4Vertical End Tap BoxSuffix ETVS (Standard)Suffix ETVX (Extended) #6 AWG -350 kcmil, Cu/AI. #4 AWG -600 kcmil, Cu/AI. 24.0" (610mm) for isolated ground.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-33

Busway SystemsCenter Tap BoxesCenter tap boxes are non-fusible devices utilized to feed to or take off power from the buswayrun. When loads served by the busway run do not require over-current protection, center tapboxes may be used. If the application requires additional wiring bending space, extendedcenter tap boxes are available. One joint stack assembly is provided with each center tap box.Selection14BUSWAYSYSTEMSStandard and Extended Center End Tap Boxes, DimensionsCable LugsPer Phase &Dimensions Inches (mm) Wire Bend Space Neutral GroundAmpere Rating "A"Std. "B" "D" "A" Ext.. "C" Std. "C" Ext. Qty. Size Lugs AL L-Rated225 — 25 (635) 16 (406) 3.9 (99) 29 (737) 17 (432) 21 (533) 1 1225 — 25 (635) 16 (406) 3.9 (99) 29 (737) 17 (432) 21 (533) 1 1400 — 25 (635) 16 (406) 3.9 (99) 29 (737) 17 (432) 21 (533) 1 1600 — 25 (635) 16 (406) 3.9 (99) 29 (737) 17 (432) 21 (533) 2 1800 400 25 (635) 16 (406) 4.2 (107) 29 (737) 17 (432) 21 (533) 3 11000 600 25 (635) 16 (406) 4.6 (117) 29 (737) 17 (432) 21 (533) 4 11200 800 29 (737) 16 (406) 5.2 (132) 33 (838) 20 (508) 24 (610) 4 11350 1000 29 (737) 16 (406) 5.7 (145) 33 (838) 20 (508) 24 (610) 4 11600 1200 33 (838) 20 (508) 6.3 (160) 37 (940) 20 (508) 24 (610) 5 12000 1350,1600 33 (838) 20 (508) 7.4 (188) 37 (940) 20 (508) 24 (610) 6 22500 2000 37 (940) 24 (610) 8.7 (221) 41 (1041) 20 (508) 24 (610) 8 23000 2500 37 (940) 24 (610) 9.7 (246) 41 (1041) 20 (508) 24 (610) 9 23200 2000 37 (940) 24 (610) 9.7 (246) 41 (1041) 20 (508) 24 (610) 9 24000 3000,3200 45 (1143) 28 (711) 11.9 (302) 49 (1245) 20 (508) 24 (610) 12 3CU M-Rated225 — 25 (635) 30 (762) 3.9 (99) 29 (737) 17 (432) 21 (533) 1 1400 — 25 (635) 30 (762) 3.9 (99) 29 (737) 17 (432) 21 (533) 1 1600 — 25 (635) 30 (762) 3.9 (99) 29 (737) 17 (432) 21 (533) 2 1800 400 25 (635) 30 (762) 4.2 (107) 29 (737) 17 (432) 21 (533) 3 11000 — 25 (635) 30 (762) 4.2 (107) 29 (737) 18 (457) 22 (559) 4 11200 600 29 (737) 33 (838) 4.5 (114) 33 (838) 22 (559) 26 (660) 4 11350 800 29 (737) 33 (838) 4.8 (122) 33 (838) 21 (533) 25 (635) 4 11600 1000 29 (737) 20 (508) 5.3 (135) 33 (838) 21 (533) 25 (635) 5 12000 1200,1350 29 (737) 20 (508) 6.1 (155) 33 (838) 20 (508) 24 (610) 6 2— 1600 33 (838) 20 (508) 6.3 (160) 37 (940) 20 (508) 24 (610) 5 12500 2000 33 (838) 24 (610) 7.3 (185) 37 (940) 23 (584) 17 (432) 8 23000 — 33 (838) 24 (610) 7.9 (201) 37 (940) 20 (508) 24 (610) 9 23200 — 33 (838) 24 (610) 7.9 (201) 37 (940) 20 (508) 24 (610) 9 24000 2500,3000,3200 37 (940) 28 (711) 9.4 (239) 41 (1041) 20 (508) 24 (610) 12 35000 4000 40(1016) 34 (863) 11.7(297) 44 (1118) 19 (483) 23 (584) 15 4Center Tap BoxSuffix CTBS (Standard)Suffix CTBX (Extended) #6 AWG -350 kcmil, Cu/AI. #4 AWG -600 kcmil, Cu/AI. 24.0" (610mm) for isolated ground.14-34Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Busway SystemsIn-Line Disconnect Cubicles and Expansion FittingsIn-Line Disconnect Cubicle, DimensionsDescriptionDimensions Inches (mm)of Unit Type of Disconnect “A” “B” “C”Fusible Switch 400-600A FK Visible Blade 36 (914) 28 (711) 28 (711)800-1200A Vacu-Break 36 (914) 36 (914) 32 (813)Molded Case JD6, LD6, MD6, ND6 36 (914) 28 (711) 28 (711)Circuit Breaker PD6, RD6 36 (914) 36 (914) 32 (813)Digital Sentron SJD6, SLD6, SMD6, SND6 36 (914) 28 (711) 28 (711)Series MCCB's SPD6 1600A Frame 36 (914) 36 (914) 32 (813)PowerCircuit Breaker200-5000A WL 48 (1219) 36 (914) 32 (813)Bolted Pressure 800A 33 (838) 36 (914) 32 (813)Switch 1200-2500A 37 (940) 40 (1016) 32 (813)3000A 37 (940) 40 (1016) 48 (1219)4000A 41 (1041) 40 (1016) 48 (1219)ACCESScompatibleNote: Consult your local Siemens sales office for details on WL breakers.SelectionIn-Line Disconnect CubiclesCubicles provide a means of mounting switchesor circuit breakers where power feeds to orpulls from the busway system. When boltedconnections are preferred, cubicles may beused in place of plug-in units. Cubicles can alsobe used at ampere ratings that exceed standardplug-in unit ratings. Modifications to cubiclescan be made in order to accommodate keyinter-locks, ground fault detector systems andpower monitoring systems.In-Line Disconnect CubicleHorizontal14 BUSWAYSYSTEMSVerticalExpansion Fittings, Dimensions (standard/min.)Dimensions Inches (mm)Ampere Rating“A”AL L-Rated225 — 13 (330)400 — 13 (330)600 — 13 (330)800 400 13 (330)1000 600 13 (330)1200 800 18 (457)1350 1000 18 (457)1600 1200 18 (457)2000 1350,1600 18 (457)2500 2000 23 (584)3000 2500 23 (584)3200 2000 23 (584)4000 3000,3200 25 (635)CU M-Rated225 — 13 (330)400 — 13 (330)600 — 13 (330)800 400 13 (330)1000 — 13 (330)1200 600 13 (330)1350 800 13 (330)1600 1000 18 (457)2000 1200,1350 18 (457)— 1600 18 (457)2500 2000 18 (457)3000 — 23 (584)3200 — 23 (584)4000 2500,3000,3200 23 (584)5000 4000 25 (635)Expansion FittingsExpansion fittings accommodate for expansionand contraction of a busway run and buildingmovement. Expansion fittings typically areinstalled in the center of long busway runs, andat the beginning of riser runs to minimize stresson the lower most device or where a buswayrun crosses an expansion joint of a building.Expansion Fittings are recommended when therun exceeds 200 ft. (608m). Expansion fittingsallow for a +/- 2 in. (50.8mm) movement alongthe length of the busway system.Expansion FittingSuffix XPFT 24.0" (610mm) for isolated ground.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-35

14BUSWAYSYSTEMSBusway SystemsReducers and Phase Rotation FittingsFused Reducers, Dimensions (standard/min.)Dimensions Inches (mm)Ampere Rating“A”AL L-Rated225 — 11.4 (289)400 — 11.4 (289)600 — 11.4 (289)800 400 11.4 (289)1000 600 11.4 (289)1200 800 12.5 (318)1350 1000 13.5 (343)1600 1200 14.6 (372)2000 1350,1600 16.9 (429)2500 2000 19.6 (498)3000 2500 21.3 (541)3200 2000 22.9 (582)4000 3000,3200 31.5 (800)CU M-Rated225 — 10.4 (264)400 — 10.4 (264)600 — 10.4 (264)800 400 10.4 (264)1000 — 10.4 (264)1200 600 11.0 (280)1350 800 11.6 (296)1600 1000 12.6 (321)2000 1200,1350 14.1 (359)— 1600 14.6 (372)2500 2000 16.6 (423)3000 — 17.9 (455)3200 — 18.9 (480)4000 2500,3000,3200 20.9 (531)5000 4000 31.5 (800)SelectionFused ReducersThe National Electric Code requires over current protection whenbusway systems are reduced in ampacity. A fused reducer is used toreduce the allowable ampere rating in those sections of the buswaythat do not require a higher rating (i.e. at branch circuit junctures).Fused ReducerSuffix RFRFNon-Fused ReducersNon-fused reducers are used in conjunction with the followingexception to the Fused Reducer in the National Electric Code: “Forindustrial establishments only,omission of over current protectionshall be permitted at points where busways are reduced in ampacity,provided that the length of the busway having the smaller ampacitydoes not exceed 50 ft. and has an ampacity of at least equal to onethirdthe rating or setting of the over current device next back on theline, and provided that such busway is free from contact withcombustible material.” Special joint stack connections are providedfor non-fused reducer connections. Consult factory for specific designguidelines.Phase Rotation Fittings, Dimensions (standard/min.)Dimensions Inches (mm)Ampere Rating“A”AL L-Rated225 — 7.9 (200)400 — 7.9 (200)600 — 7.9 (200)800 400 8.5 (216)1000 600 9.4 (239)1200 800 10.5 (267)1350 1000 11.5 (293)1600 1200 12.6 (321)2000 1350,1600 14.9 (376)2500 2000 17.6 (447)3000 2500 19.8 (503)3200 2000 21.3 (541)4000 3000,3200 24.3 (617)CU M-Rated225 — 7.9 (200)400 — 7.9 (200)600 — 7.9 (200)800 400 7.9 (200)1000 — 8.4 (213)1200 600 9.0 (229)1350 800 9.6 (245)1600 1000 10.6 (270)2000 1200,1350 12.1 (372)— 1600 12.6 (321)2500 2000 14.6 (200)3000 — 15.8 (402)3200 — 17.3 (439)4000 2500,3000,3200 19.3 (490)5000 4000 23.3 (592)Phase-Rotation FittingsPhase-rotation fittings can be used when the application requires aphase rotation in the power supply. Phase rotation fittings can beordered for “phase and ground”, “phase only” and “ground only”rotations.Phase Rotation FittingSuffix TRPG, Phase and GroundTRPO, Phase OnlyTRGO, Ground OnlyPhase Rotation Examples14-36Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Busway SystemsService HeadsSingle-Phase Service Heads, Dimensions (standard/min.)Cable Lugs perDimensions Inches (mm) Phase and Neutral GroundAmpere Rating Single-Phase “A” Qty. Size Lugs AL L-Rated225 13 (330) 1 1400 225 13 (330) 1 1600 — 13 (330) 2 1800 400 13 (330) 3 11000 600 13 (330) 4 11200 800 18 (457) 4 11350 1000 18 (457) 4 11600 1200 18 (457) 5 12000 1350,1600 20 (508) 6 22500 2000 27 (686) 8 23000 2500 29 (737) 9 23200 2000 29 (737) 9 24000 3000,3200 29 (737) 12 3CU M-Rated225 13 (330) 1 1400 13 (330) 1 1600 13 (330) 2 1800 400 13 (330) 3 11000 — 13 (330) 4 11200 600 13 (330) 4 11350 800 13 (330) 4 11600 1000 18 (457) 5 12000 1200,1350 20 (508) 6 2— 1600 18 (457) 5 12500 2000 20 (508) 8 23000 — 27 (686) 9 23200 — 27 (686) 9 24000 2500,3000,3200 27 (686) 12 35000 4000 29 (737) 15 4SelectionService Heads are used to connect busway to a service entrance. In the Sentron Busway line, 3 single-phase service heads and3-phase service head connections are available. The standard service entrance connection is the 3-phase service head whichconsists of one service head for all three phases. 3 single-phase service heads consist of three heads – one for each phase andmay be used to meet the requirements of certain applications. To ensure ease of installation of incoming cables, both types ofSentron service heads are constructed so that the lugs face the Glastic bottom of the box. The Glastic bottom providesinsulation and protection to the incoming cables.Three Single-Phase Service HeadsSuffix V1TX14 BUSWAYSYSTEMSThree-Phase Service Heads, Dimensions (standard/min.)Cable Lugs perDimensions Inches (mm) Phase and Neutral GroundAmpere Rating Three-Phase “B” Qty. Size Lugs AL L-Rated225 13 (330) 1 1400 225 13 (330) 1 1600 — 13 (330) 2 1800 400 13 (330) 3 11000 600 13 (330) 4 11200 800 18 (457) 4 11350 1000 18 (457) 4 11600 1200 18 (457) 5 12000 1350,1600 18 (457) 6 22500 2000 27 (686) 8 23000 2500 27 (686) 9 23200 2000 27 (686) 9 24000 3000,3200 29 (737) 12 3CU M-Rated225 13 (330) 1 1400 13 (330) 1 1600 13 (330) 2 1800 400 13 (330) 3 11000 — 13 (330) 4 11200 600 13 (330) 4 11350 800 13 (330) 4 11600 1000 18 (457) 5 12000 1200,1350 18 (457) 6 2— 1600 18 (457) 5 12500 2000 18 (457) 8 23000 — 27 (686) 9 23200 — 27 (686) 9 24000 2500,3000,3200 27 (686) 12 35000 4000 29 (737) 15 4 #6 AWG - 350 kcmil, Cu / Al. #4 AWG - 600 kcmil, Cu / Al.Three-Phase Service HeadSuffix V3TXSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-37

14BUSWAYSYSTEMSBusway SystemsHangersTrapeze Hanger, Dimensions and Catalog Numbers“A” Dimensions Flat MountedAmpere Rating Inches (mm) Catalog Number AL L-Rated225 — 10.0 (254) SXTH1400 — 10.0 (254) SXTH1600 — 10.0 (254) SXTH1800 400 10.0 (254) SXTH11000 600 10.0 (254) SXTH11200 800 10.0 (254) SXTH11350 1000 13.5 (343) SXTH21600 1200 13.5 (343) SXTH22000 1350,1600 13.5 (343) SXTH22500 2000 13.5 (343) SXTH33000 2500 13.5 (343) SXTH33200 2000 13.5 (343) SXTH34000 3000,3200 23.0 (584) SXTH4CU M-Rated225 — 10.0 (254) SXTH1400 — 10.0 (254) SXTH1600 — 10.0 (254) SXTH1800 400 10.0 (254) SXTH11000 — 10.0 (254) SXTH11200 600 10.0 (254) SXTH11350 800 10.0 (254) SXTH11600 1000 10.0 (254) SXTH12000 1200,1350 13.5 (343) SXTH2— 1600 13.5 (343) SXTH22500 2000 13.5 (343) SXTH23000 — 18.5 (470) SXTH33200 — 18.5 (470) SXTH34000 2500,3000,3200 18.5 (470) SXTH35000 4000 23.0 (584) SXTH4 Use SXTH1 for Edge Mounted.SelectionTrapeze HangerA complete offering of hangers is available tosupport Sentron Busway in both vertical andhorizontal applications. Standard trapeze hangerssupport Sentron Busway in horizontal applications on10 ft. (3.05m) centers. Additional hangers may beused if structural requirements mandate their use.The contractor must supply drop rods to completeassembly for trapeze hangers.Flat MountedEdge MountedSpring Hanger, Catalog NumbersCatalog Assembly floor to ceiling heightAmpere Rating 10ft. 12 ft. 14 ft. 16 ft. 18 ft.AL L-Rated225 — SXSH4 SXSH4 SXSH4 SXSH4 SXSH4400 — SXSH4 SXSH4 SXSH4 SXSH4 SXSH4600 — SXSH4 SXSH4 SXSH4 SXSH4 SXSH4800 400 SXSH4 SXSH4 SXSH4 SXSH4 SXSH41000 600 SXSH4 SXSH4 SXSH4 SXSH4 SXSH41200 800 SXSH4 SXSH4 SXSH4 SXSH4 SXSH41350 1000 SXSH4 SXSH4 SXSH4 SXSH4 SXSH41600 1200 SXSH4 SXSH4 SXSH4 SXSH4 SXSH42000 1350,1600 SXSH4 SXSH4 SXSH4 SXSH4 SXSH42500 2000 SXSH4 SXSH4 SXSH4 SXSH6 SXSH63000 2500 SXSH4 SXSH6 SXSH6 SXSH6 SXSH63200 2000 SXSH4 SXSH6 SXSH6 SXSH6 SXSH64000 3000,3200 SXSH4 SXSH6 SXSH6 SXSH6 SXSH8CU M-Rated225 — SXSH4 SXSH4 SXSH4 SXSH4 SXSH4400 — SXSH4 SXSH4 SXSH4 SXSH4 SXSH4600 — SXSH4 SXSH4 SXSH4 SXSH4 SXSH4800 400 SXSH4 SXSH4 SXSH4 SXSH4 SXSH41000 — SXSH4 SXSH4 SXSH4 SXSH4 SXSH41200 600 SXSH4 SXSH4 SXSH4 SXSH4 SXSH41350 800 SXSH4 SXSH4 SXSH4 SXSH6 SXSH61600 1000 SXSH4 SXSH4 SXSH6 SXSH6 SXSH62000 1200,1350 SXSH6 SXSH6 SXSH6 SXSH6 SXSH8— 1600 SXSH4 SXSH4 SXSH4 SXSH4 SXSH42500 2000 SXSH2 SXSH6 SXSH8 SXSH8 SXSH83000 — SXSH6 SXSH8 SXSH8 SXSH10 SXSH103200 — SXSH6 SXSH8 SXSH8 SXSH10 SXSH124000 2500,3000,3200 SXSH6 SXSH8 SXSH10 SXSH12 SXSH125000 4000 SXSH6 SXSH10 SXSH12 SXSH14 SXSH14Spring HangerSpring hangers and floor support hangers must beused to provide secure mounting of the busway runin vertical applications. Spring hangers support theweight of the busway on each floor and alsocompensate for minimal building movement andthermal expansion. Maximum distance betweenspring hangers may not exceed 16 ft. (4.88m). Whenordering 18 ft. (5.49m) floor to ceiling heightassemblies, intermediate support hangers arenecessary.**Note: Flanges do not offer support to the busway. Flanges provide ameans of covering the hole created in the existing structure.14-38Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Busway SystemsHangersStructural Steel Hanger, Dimensions and Catalog Numbers“A” Dimensions CatalogAmpere Rating Inches (mm) NumberAL L-Rated225 — 10.0 (254) SXSS1400 — 10.0 (254) SXSS1600 — 10.0 (254) SXSS1800 400 10.0 (254) SXSS11000 600 10.0 (254) SXSS11200 800 10.0 (254) SXSS11350 1000 13.5 (343) SXSS21600 1200 13.5 (343) SXSS22000 1350,1600 13.5 (343) SXSS22500 2000 18.5 (470) SXSS33000 2500 18.5 (470) SXSS33200 2000 18.5 (470) SXSS34000 3000,3200 23.0 (584) SXSS4CU M-Rated225 — 10.0 (254) SXSS1400 — 10.0 (254) SXSS1600 — 10.0 (254) SXSS1800 400 10.0 (254) SXSS11000 — 10.0 (254) SXSS11200 600 10.0 (254) SXSS11350 800 10.0 (254) SXSS11600 1000 10.0 (254) SXSS12000 1200,1350 13.5 (343) SXSS2— 1600 13.5 (343) SXSS22500 2000 13.5 (343) SXSS23000 — 13.5 (343) SXSS23200 — 13.5 (343) SXSS24000 2500,3000,3200 13.5 (343) SXSS25000 4000 23.0 (584) SXSS4SelectionStructural Steel HangerA complete offering of hangers is available to support Sentron Busway inboth vertical and horizontal applications. Structural Steel hangers supportSentron Busway in horizontal applications on 10 ft. (3.05m) centers.Additional hangers may be used if structural requirements mandate theiruse.14 BUSWAYSYSTEMSSingle Drop Rod Hanger, Catalog NumbersAmpere RatingCatalog NumberAL L-Rated225 — —400 — —600 — SXDRA1800 400 SXDRA21000 600 SXDRA31200 800 SXDRA41350 1000 SXDRA51600 1200 SXDRA62000 1350,1600 SXDRA72500 2000 —3000 2500 —3200 2000 —4000 3000,3200 —CU M-Rated225 — —400 — —600 — —800 400 SXDRC11000 — SXDRC21200 600 SXDRC31350 800 SXDRC41600 1000 SXDRC52000 1200,1350 SXDRC6— 1600 SXDRC82500 2000 SXDRC73000 — —3200 — —4000 2500,3000,3200 —5000 4000 —Single Drop Rod HangerA complete offering of hangers is available to support Sentron Busway inboth vertical and horizontal applications. Single drop rod hangers supportSentron Busway in horizontal applications on 10 ft. (3.05m) centers.Additional hangers may be used if structural requirements mandate theiruse. The contractor must supply drop rods to complete assembly for singledrop rod hangers.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-39

14BUSWAYSYSTEMSBusway SystemsHangers and End ClosersWall Mounted Hanger, Dimensions and Catalog NumbersDimensions Inches (mm) CatalogAmpere Rating “A” ”B” ”C” NumberAL L-Rated225 — 12.3 (311) 6.1 (156) 4.2 (107) SXWH1400 — 12.3 (311) 6.1 (156) 4.2 (107) SXWH1600 — 12.3 (311) 6.1 (156) 4.2 (107) SXWH1800 400 12.3 (311) 6.1 (156) 3.8 (97) SXWH11000 600 12.3 (311) 6.1 (156) 3.8 (97) SXWH11200 800 12.3 (311) 6.1 (156) 2.8 (72) SXWH11350 1000 16.3 (413) 8.1 (206) 4.4 (111) SXWH21600 1200 16.3 (413) 8.1 (206) 3.9 (98) SXWH22000 1350,1600 16.3 (413) 8.1 (206) 2.8 (70) SXWH22500 2000 20.8 (527) 10.4 (264) 3.6 (92) SXWH33000 2500 20.8 (527) 10.4 (264) 2.5 (64) SXWH33200 2000 20.8 (527) 10.4 (264) 1.8 (46) SXWH34000 3000,3200 25.3 (641) 12.6 (321) 2.5 (64) SXWH4CU M-Rated225 — 12.3 (311) 6.1 (156) 4.2 (107) SXWH1400 — 12.3 (311) 6.1 (156) 4.2 (107) SXWH1600 — 12.3 (311) 6.1 (156) 4.2 (107) SXWH1800 400 12.3 (311) 6.1 (156) 3.8 (97) SXWH11000 — 12.3 (311) 6.1 (156) 3.8 (97) SXWH11200 600 12.3 (311) 6.1 (156) 2.8 (72) SXWH11350 800 12.3 (311) 6.1 (156) 2.8 (72) SXWH11600 1000 12.3 (311) 6.1 (156) 2.8 (72) SXWH12000 1200,1350 16.3 (413) 8.1 (206) 4.4 (111) SXWH2— 1600 16.3 (413) 8.1 (206) 3.9 (98) SXWH22500 2000 16.3 (413) 8.1 (206) 2.8 (70) SXWH23000 — 20.8 (527) 10.4 (264) 3.6 (92) SXWH33200 — 20.8 (527) 10.4 (264) 2.5 (64) SXWH34000 2500,3000,3200 20.8 (527) 10.4 (264) 1.8 (46) SXWH35000 4000 25.3 (641) 12.6 (321) 2.5 (64) SXWH4Wall Mounted HangerWall Mounted Hangers are used for horizontalapplications close to a wall. The busway can be mountedeither edgewise or flatwise to the wall.Wall Mounted Hanger ensures the minimum clearancebetween the wall and the busway run.SelectionEnd ClosersEnd closers safely terminate a busway run and protect thebus bar ends. End closers may be removed easily in orderto extend a busway run. End closers are shipped withGlastic insulation pieces, however, joint stacks andinspection covers are not included.End Closers(Joint stack and covers not included)Suffix ECLS14-40Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Busway SystemsRoof and Wall FlangesRoof, wall and floor flanges are available forSentron Busway. When the busway run passesthorough a roof, wall or ceiling, a flange shouldbe used. Flanges do not offer support to thebusway. Flanges provide a means of covering thehole created in the existing structure. Additionalsealant may be required to meet fire codes andall other local requirements. No caulking orgasketing is provided with Sentron flanges.Roof Flanges, DimensionsDimensions Inches (mm)Ampere Rating “A” ”B”AL L-Rated225 — 12 (305) 18 (457)400 — 12 (305) 18 (457)600 — 12 (305) 18 (457)800 400 12 (305) 18 (457)1000 600 12 (305) 18 (457)1200 800 12 (305) 18 (457)1350 1000 16 (406) 22 (559)1600 1200 16 (406) 22 (559)2000 1350,1600 16 (406) 22 (559)2500 2000 20.5 (521) 22 (559)3000 2500 20.5 (521) 26.5 (673)3200 2000 20.5 (521) 26.5 (673)4000 3000,3200 25 (635) 31 (787)CU M-Rated225 — 12 (305) 18 (457)400 — 12 (305) 18 (457)600 — 12 (305) 18 (457)800 400 12 (305) 18 (457)1000 — 12 (305) 18 (457))1200 600 12 (305) 18 (457)1350 800 12 (305) 18 (457)1600 1000 12 (305) 18 (457)2000 1200,1350 16 (406) 22 (559)— 1600 16 (406) 22 (559)2500 2000 16 (406) 22 (559)3000 — 20.5 (521) 26.5 (673)3200 — 20.5 (521) 26.5 (673)4000 2500,3000,3200 20.5 (521) 26.5 (673)5000 4000 25 (635) 31 (787)Roof FlangesSuffix GRFLSelectionRoof FlangesRoof flanges are available for Sentron Busway. When the busway run passesthorough a roof, a flange should be used. Flanges do not offer support to thebusway. Flanges provide a means of covering the hole created in the existingstructure. Additional sealant may be required to meet fire codes and all otherlocal requirements. No caulking or gasketing is provided with Sentron flanges.Roof flanges provide a watertight seal for use with NEMA 3R and IP66 ratedbusway. Roof pitch must be indicated on drawings when ordering roof flanges.14 BUSWAYSYSTEMSWall, Ceiling and Floor Flanges, DimensionsDimensions Inches (mm)Ampere Rating “A” ”B”AL L-Rated225 — 11 (279) 7 (178)400 — 11 (279) 7 (178)600 — 11 (279) 7 (178)800 400 11 (279) 7 (178)1000 600 12 (305) 8 (203)1200 800 13 (330) 9 (229)1350 1000 14 (356) 10 (254)1600 1200 15 (381) 11 (279)2000 1350,1600 17 (432) 13 (330)2500 2000 20 (508) 16 (406)3000 2500 22 (559) 18 (457)3200 2000 24 (610) 20 (508)4000 3000,3200 26 (660) 22 (559)CU M-Rated225 — 10 (254) 6 (152)400 — 10 (254) 6 (152)600 — 10 (254) 6 (152)800 400 10 (254) 6 (152)1000 — 11 (279) 7 (178)1200 600 12 (305) 8 (203)1350 800 12 (305) 8 (203)1600 1000 13 (330) 9 (229)2000 1200,1350 15 (381) 11 (279)— 1600 15 (381) 11 (279)2500 2000 17 (432) 13 (330)3000 — 18 (457) 14 (356)3200 — 19 (483) 15 (381)4000 2500,3000,3200 21 (533) 17 (432)5000 4000 26 (660) 22 (559)Wall, Ceiling and Floor FlangesWall/Floor flanges are available for Sentron Busway. When the busway runpasses thorough a wall or ceiling, a flange should be used. Flanges do notoffer support to the busway. Flanges provide a means of covering the holecreated in the existing structure. Additional sealant may be required to meetfire codes and all other local requirements. No caulking or gasketing isprovided with Sentron flanges.Wall, Ceiling and Floor FlangesSuffix GWFLSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-41

Busway SystemsFlanged EndsFlanged ends provide a direct connection to low voltageswitchgear, switchboards, motor control centers, largepower panels, and other electrical distributionequipment. Flanged ends are shipped with one jointstack assembly. The switchgear manufacture supplieslugs and mounting hardware. See illustration for flangedend drilling patterns.Selection14BUSWAYSYSTEMSFlanged End, DimensionsDimensions Inches (mm)Fig.Ampere Rating “W” No.AL L-Rated225 — 1.75 (44.4) 1400 — 1.75 (44.4) 1600 — 1.75 (44.4) 1800 400 2.38 (60.5) 11000 600 3.25 (82.6) 11200 800 4.38 (111.3) 11350 1000 5.38 (136.7) 11600 1200 6.50 (165.1) 12000 1350,1600 8.75 (222.3) 12500 2000 5.63 (143.0) 23000 2500 6.75 (171.5) 23200 2000 6.75 (171.5) 24000 3000,3200 9.00 (228.6) 2CU M-Rated225 — 1.75 (44.4) 1400 — 1.75 (44.4) 1600 — 1.75 (44.4) 1800 400 1.75 (44.4) 11000 — 2.25 (57.2) 11200 600 2.88 (73.2) 11350 800 3.50 (88.9) 11600 1000 4.50 (114.3) 12000 1200,1350 6.00 (152.4) 1— 1600 6.50 (165.1) 12500 2000 8.50 (215.9) 13000 — 4.75 (120.7) 23200 — 5.50 (139.7) 24000 2500,3000,3200 6.50 (165.1) 25000 4000 8.50 (215.9) 2Flanged EndSuffix FRNDFigure 1 Figure 2Flanged End Bus Bar Drilling Pattern (NEMA) (Same pattern for 2 bus bars per pole, see figure 2 above.) Other drilling patterns are available and must be specified at order entry. See Figures 4, 5 and 6 on page 14-43.14-42Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Busway SystemsFlanged EndsSelectionFlanged End, Dimensions (standard/min.)Dimensions Inches (mm)Ampere Rating Ref. Bar Width Fig. No. “A” ”B” ”C” ”D” ”E” ”F” ”G” Fig. No.AL L-Rated225 — 2.38 (60.5) 1 10.0 (254) 8.00 (203) 4.38 (111) 1.94 (49) 3.88 (99) — 6.00 (152) 4, 5400 — 2.38 (60.5) 1 10.0 (254) 8.00 (203) 4.38 (111) 1.94 (49) 3.88 (99) — 6.00 (152) 4, 5600 — 2.38 (60.5) 1 10.0 (254) 8.00 (203) 4.38 (111) 1.94 (49) 3.88 (99) — 6.00 (152) 4, 5800 400 2.38 (60.5) 1 10.0 (254) 8.00 (203) 4.38 (111) 1.94 (49) 3.88 (99) — 6.00 (152) 4, 51000 600 3.25 (82.6) 2 10.0 (254) 8.00 (203) 4.38 (111) 1.94 (49) 2.06 (52) — 6.00 (152) 4, 61200 800 4.38 (111.3) 2 15.50 (395) 13.50 (343) 7.13 (181) 1.60 (41) 3.19 (81) — 8.50 (216) 4, 61350 1000 5.38 (136.7) 2 15.50 (395) 13.50 (343) 7.13 (181) 2.10 (53) 4.19 (106) — 8.50 (216) 4, 61600 1200 6.50 (165.1) 2 15.50 (395) 13.50 (343) 7.13 (181) 2.66 (67) 5.31 (135) — 8.50 (216) 4, 62000 1350,1600 8.75 (222.3) 2 15.50 (395) 13.50 (343) 7.13 (181) 3.78 (96) 7.56 (192) — 8.50 (216) 4, 62500 2000 5.63 (143.0) 3 20.0 (508) 18.00 (457) 4.50 (114) 0.68 (17) 1.37 (36) 4.44 (113) 13.25 (337) 4, 63000 2500 6.75 (171.5) 3 20.0 (508) 18.00 (457) 4.50 (114) 0.68 (17) 1.37 (36) 5.56 (141) 13.25 (337) 4, 63200 2000 7.50 (190.5) 3 24.0 (610) 22.0 (569) 5.50 (140) 0.68 (17) 1.37 (36) 6.32 (161) 13.25 (337) 4, 64000 3000,3200 9.00 (228.6) 3 24.0 (610) 22.0 (569) 5.50 (140) 0.68 (17) 1.37 (36) 7.81 (198) 14.25 (362) 4, 6CU M-Rated225 — 1.75 (44.4) 1 10.0 (254) 8.00 (203) 4.38 (111) 1.63 (41) 3.25 (83) — 6.00 (152) 4, 5400 — 1.75 (44.4) 1 10.0 (254) 8.00 (203) 4.38 (111) 1.63 (41) 3.25 (83) — 6.00 (152) 4, 5600 — 1.75 (44.4) 1 10.0 (254) 8.00 (203) 4.38 (111) 1.63 (41) 3.25 (83) — 6.00 (152) 4, 5800 400 1.75 (44.4) 1 10.0 (254) 8.00 (203) 4.38 (111) 1.63 (41) 3.25 (83) — 6.00 (152) 4, 51000 — 2.25 (57.2) 1 10.0 (254) 8.00 (203) 4.38 (111) 1.88 (48) 3.75 (95) — 6.00 (152) 4, 51200 600 2.88 (73.2) 2 10.0 (254) 8.00 (203) 4.38 (111) 0.85 (21) 1.69 (43) — 6.00 (152) 4, 61350 800 3.50 (88.9) 2 10.0 (254) 8.00 (203) 4.38 (111) 1.16 (29) 2.31 (59) — 6.00 (152) 4, 61600 1000 4.50 (114.3) 2 15.50 (395) 13.50 (343) 7.13 (181) 1.66 (42) 3.31 (84) — 8.50 (216) 4, 62000 1200,1350 6.00 (152.4) 2 15.50 (395) 13.50 (343) 7.13 (181) 2.41 (42) 4.81 (122) — 8.50 (216) 4, 6— 1600 6.50 (165.1) 2 15.50 (395) 13.50 (343) 7.13 (181) 2.66 (67) 5.31 (135) — 8.50 (216) 4, 62500 2000 8.50 (215.9) 1 15.50 (395) 13.50 (343) 7.13 (181) 3.66 (93) 7.31 (186) — 8.50 (216) 4, 63000 — 4.75 (120.7) 3 20.0 (508) 18.00 (457) 4.50 (114) 0.68 (17) 1.37 (36) 3.56 (90) 13.25 (337) 4, 63200 — 5.50 (139.7) 3 20.0 (508) 18.00 (457) 4.50 (114) 0.68 (17) 1.37 (36) 4.32 (110) 13.25 (337) 4, 64000 2500,3000,3200 6.50 (165.1) 3 20.0 (508) 18.00 (457) 4.50 (114) 0.68 (17) 1.37 (36) 5.31 (135) 13.25 (337) 4, 65000 4000 8.50 (215.9) 3 24.0 (610) 22.00 (569) 5.50 (140) 0.68 (17) 1.37 (36) 7.31 (186) 14.25 (362) 4, 614 BUSWAYSYSTEMSFigure 1 Figure 2Figure 3Integral and Internal Ground Strap Drilling DetailFigure 4 Figure 5 Figure 6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-43

Busway SystemsPanelboards and Meter Center ModulesMeter center modules provide a quick andconvenient method of connecting to meteringdevices for both commercial and industrialapplications.Meter center modules connect at the side of abusway run to special joint stacks; these specialjoints can be added to existing busway toaccommodate meter center moduleconnections. When using multiple meteringstacks, main disconnects are available if thesystem reaches the 6 circuit rule (see meteringbulletin for further information).Selection14BUSWAYSYSTEMSDimensional Data RequiredDimensions Inches (mm)“A” Distance between floor and bottomof meter center as required by thecustomer.“B” Dimension from bottom of metercenter to centerline of meter centerjoint connection stack:100-125A Panel, B = 16.5 (419)200A Panel, B = 22.0 (559)“C” Equals “A” plus “B”, Minimum 16.0 (406)“D” Individual meter center height.Consult Modular Metering applicationinformation.14-44Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Busway SystemsSelectionMeter Center CubiclesMeter center cubicles provide a quick and convenient method of connecting to metering devices for both commercial andindustrial applications and have the main disconnect circuit breaker factory installed.Having the main disconnect built into the device reduces the required space on the right and left side of the busway. Metercenter modules connect at the side of the cubicle frame box using an SBJ4 stack. Meter center cubicles are available for600 – 1200 Amp (L, M and N Frames). They are available with flexible meter center connections, left side, right side or both.(When ordering a meter center cubicle a SBJ4 stack must be ordered separately.)Molded Case Circuit Breaker Cubicles with Meter Tap Stack Provisions Dimensions, Inches (mm)Busway L Frame Breaker (250-600A) M Frame Breaker (250-600A) N Frame Breaker (800-1200A)Ampere Rating Width W A B C A B C A B CAL L-Rated225 — 3.9 (99) 32 (813) 24 (620) 16 (406) 37 (940) 26 (660) 16 (406) 37 (940) 26 (660) 16 (406)400 — 3.9 (99) 32 (813) 24 (620) 16 (406) 37 (940) 26 (660) 16 (406) 37 (940) 26 (660) 16 (406)600 — 3.9 (99) 32 (813) 24 (620) 16 (406) 37 (940) 26 (660) 16 (406) 37 (940) 26 (660) 16 (406)800 400 4.6 (117) 32 (813) 24 (610) 16 (406) 37 (940) 26 (660) 16 (406) 37 (940) 26 (660) 16 (406)1000 600 5.4 (137) 32 (813) 24 (610) 16 (406) 37 (940) 26 (660) 16 (406) 37 (940) 26 (660) 16 (406)1200 800 6.6 (168) 32 (813) 24 (610) 16 (406) 37 (940) 26 (660) 16 (406) 37 (940) 26 (660) 16 (406)1350 1000 7.6 (193) 32 (813) 24 (610) 16 (406) 37 (940) 26 (660) 16 (406) 37 (940) 26 (660) 16 (406)1600 1200 8.7 (221) 32 (813) 24 (610) 20 (490) 37 (940) 26 (660) 20 (490) 37 (940) 26 (660) 20 (490)2000 1350,1600 10.9 (277) 32 (813) 24 (610) 20 (490) 37 (940) 26 (660) 20 (490) 37 (940) 26 (660) 20 (490)2500 2000 13.7 (348) 32 (813) 24 (610) 23.5 (597) 37 (940) 26 (660) 23.5 (597) 37 (940) 26 (660) 23.5 (597)3000 2500 15.8 (401) 32 (813) 24 (610) 23.5 (597) 37 (940) 26 (660) 23.5 (597) 37 (940) 26 (660) 23.5 (597)3200 2000 17.3 (439) 32 (813) 24 (610) 23.5 (597) 37 (940) 26 (660) 28 (711) 37 (940) 26 (660) 28 (711)4000 3000,3200 20.3 (516) 32 (813) 24 (610) 28 (711) 37 (940) 26 (660) 28 (711) 37 (940) 26 (660) 28 (711)4000 3000,3200 20.3 (516) 32 (813) 24 (610) 28 (711) 37 (940) 26 (660) 28 (711) 37 (940) 26 (660) 28 (711)CU M-Rated225 — 3.9 (99) 32 (813) 24 (620) 16 (406) 37 (940) 26 (660) 16 (406) 37 (940) 26 (660) 16 (406)400 — 3.9 (99) 32 (813) 24 (620) 16 (406) 37 (940) 26 (660) 16 (406) 37 (940) 26 (660) 16 (406)600 — 3.9 (99) 32 (813) 24 (620) 16 (406) 37 (940) 26 (660) 16 (406) 37 (940) 26 (660) 16 (406)800 400 3.9 (99) 32 (813) 24 (620) 16 (406) 37 (940) 26 (660) 16 (406) 37 (940) 26 (660) 16 (406)1000 — 4.4 (112) 32 (813) 24 (610) 16 (406) 37 (940) 26 (660) 16 (406) 37 (940) 26 (660) 16 (406)1200 600 5.1 (130) 32 (813) 24 (610) 16 (406) 37 (940) 26 (660) 16 (406) 37 (940) 26 (660) 16 (406)1350 800 5.7 (145) 32 (813) 24 (610) 16 (406) 37 (940) 26 (660) 16 (406) 37 (940) 26 (660) 16 (406)1600 1000 6.7 (170) 32 (813) 24 (610) 16 (406) 37 (940) 26 (660) 16 (406) 37 (940) 26 (660) 16 (406)2000 1200,1350 8.2 (208) 32 (813) 24 (610) 20 (490) 37 (940) 26 (660) 20 (490) 37 (940) 26 (660) 20 (490)— 1600 8.7 (221) 32 (813) 24 (610) 20 (490) 37 (940) 26 (660) 20 (490) 37 (940) 26 (660) 20 (490)2500 2000 10.7 (272) 32 (813) 24 (610) 20 (490) 37 (940) 26 (660) 20 (490) 37 (940) 26 (660) 20 (490)3000 — 11.8 (300) 32 (813) 24 (610) 20 (490) 37 (940) 26 (660) 20 (490) 37 (940) 26 (660) 20 (490)3200 — 13.3 (335) 32 (813) 24 (610) 20 (490) 37 (940) 26 (660) 23.5 (597) 37 (940) 26 (660) 23.5 (597)4000 2500,3000,3200 15.3 (389) 32 (813) 24 (610) 23.5 (597) 37 (940) 26 (660) 23.5 (597) 37 (940) 26 (660) 23.5 (597)5000 4000 19.3 (491) 32 (813) 24 (610) 28 (711) 37 (940) 26 (660) 28 (711) 37 (940) 26 (660) 28 (711)14 BUSWAYSYSTEMSMeter Center ModuleMain Disconnect Meter ModuleMeter Center CubicleSide Mount PanelboardSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-45

14BUSWAYSYSTEMSBusway SystemsInstallation and Application InformationInstallationIn preparation for installation of yourbusway systems, it is important tofamiliarize yourself with the followinginstallation publications:▪ General Instructions For Handling,Installation, Operation andMaintenance of Busway Rated 600volts or less (NEMA StandardsPublication BU1)▪ Storage, Installation andMaintainance Instructions for SentronBusway (31-9918-01)These publications should be readthrough thoroughly and used asreference during installation to ensureproper installation procedures. AllBusway Order Entry ChecklistNote: Submit one checklist for each busway run.Date Submitted: ____________Purchase Order #: _______________________Project Name: _____________________________Submitted By: _____________________________Sales Engineer: _________________________________ Released _____ Hold for ReleaseRun Designation: ___________________________Busway Catalog #: __________________________Service: _____ Phase _____ Wire _____ Volts _____ AmpsConductor: _____ Cu _____ Al _____ “M” Rated _____ “L”RatedNeutral: _____ None _____ 100% _____ 200%Ground: _____ Case _____ Internal _____ IsolatedIP Rating _____ IP40 (Indoor)_____ IP55 (Splash Proof)_____ NEMA 3R (Outdoor)Shipping Instructions:_____ Ship complete _____ Ship partialSpecial Shipping Requirements:___________________________Ship not before date: ____________Drawing Requirements:_____ Approval drawings _____ # copies:_____ Record drawings _____ # copies:A) Engineering InformationCheck applicable information and be sure it is shown onaccompanying drawing.equipment should be inspected upondelivery. If the busway is not installedimmediately, it should be stored in aclean, dry location. Factory suppliedrecord drawings as well as installationtools should be accessible in preparationfor installation.UL 1479 Fire Rated InstallationsSentron Busway has been tested inaccordance with UL 1479 and offers acertified two hour fire rating for gypsumwallboard construction and a three hourfire rating for concrete slab or blockpenetrations. These ratings wereachieved using standard buswayinstalled with SpecSeal ® sealant fromSpecified Technologies Inc. TheSpecSeal ® fire stop system providessuperior11. _____ Riser Busa) _____ Load side of bus plug (top or bottom)b) _____ Required distance from floor to top ofpanel/plugsc) _____ Meter Bank (center line of tap stack)d) _____ Barriers and/or floor supports12. _____ Transformer Connectionsa) _____Standard XFMR Service Heads_____ 1-three phase_____ 3-single phaseb) Special drawing required_____ Dimensions between phases_____ LV spade detail including drilling andthickness_____ Dimension of the LV spade from tank wall_____ Throat opening and hole pattern (if any)13. _____ Utility Vault Connection Utility Type: __________ Drawing Attached14. End Cable Tap Box_____ Horizontal_____ Vertical_____ Standard Lugs_____ Special Lug RequirementsNo. _____ Size _____ per phase & neutralNo. _____ Size _____ per ground15. _____ Busway Mounting position in reference to floor:Selectionperformance at the industry’s lowestinstalled cost. Sentron is the firstbusway system to achieve a fire ratingfor gypsum wallboard construction.MeasuringCritical to the success of any buswayinstallation is the layout and the accuratemeasuring of the busway. First andforemost:Select a route for your busway that willrequire the fewest fittings and themaxumum number of 10' (3.05m) sections.It is important that the busway system bedesigned to meet the requirements of theNational Electric Code for Busway. Thereare a number of techniques that may beused to ensure an accurate measurementbefore purchasing and installing thebusway. The following tools will berequired during layout and masuring:▪ 100' (30.48m) tape measure▪ Meauring Stick▪ Chalkline▪ Plumb Bob▪ Marker(A laser distance measuring device maybe used to speed the measuringprocess).1. _____ Drawing Attached (Required)2. _____ Estimate Sheets Attached (Required)3. _____ Dimensions from walls, column lines, etc.4. _____ Wall, floor, roof thickness and pitch5. _____ Floor Elevations_____ Floor to floor_____ Floor to ceiling6. _____ Wall Locations7. _____ Equipment Pads shown: Height _______8. ____ Existing busway to be extendeda) _____ Phasingb) _____ Nameplate Informatioc) _____ Match to competitor: Call the factory9. ____ Secial Switchboard Connection: Provide Details10. ____ Phase transpositions: Provide phasing on drawing.FlatwiseEdgewiseB) Specifications(Check or fill appropriate blanks)1. _____ Standard busway meets specifications2. _____ Exception to specificationsa) Short circuit withstand _____ Ampere Symmetricalb) Voltage Drop Requirement _____c) Temperature-rise requirement _____d) Current density requirement _____e) Special Paint: Provide paint chip _____f) Other: ____________________________Exception to electrical specifications: Call the factory.Other Notes: _________________________________________________________________________________________________________________________________Minimal ClearancesMinimum clearances for installing feederbusway are shown. Additional clearancemay be required for plug-in deviceslarger than 100A fusible and 250A circuitbreaker.14-46Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Busway SystemsSiemens Sentron Busway Quick ReferenceSiemens Sentron Busway Quick ReferenceCritical Dimensions:Busway that passes through a wall, ceiling or floor:▪ centerline of a joint to the wall, ceiling or floor = 7 in. min.▪ centerline of a joint (above a floor support) to a floor = 16 in. min.▪ joints cannot be positioned inside a wall, ceiling or floor (joints must be accessible for maintenance)Feeder Busway clearances:▪ from the top of the busway to a ceiling/floor/wall or other busway = 6 in. min.▪ from the side of the busway to a ceiling/floor/wall or other busway = 4 in. min.Plug-in Busway clearances:▪ plug-in busway clearances depend on the configuration of bus plugs (see bus plug clearance charts in theSentron Selection and Application Guide)▪ otherwise, clearances for feeder busway apply▪ note orientation of the operating handle and provide clearance for access & operationFeeder Busway length:▪ minimum length = 14.38 in.▪ maximum length = 10 ft.Plug-in & Riser length:▪ available only in 4, 6, 8 and 10 ft. lengthsFlat Elbow section:▪ maximum leg length = 4 ft.▪ minimum leg length: Varies according to amperage and bus bar materialEdge Elbow section:▪ maximum length = 4 ft.▪ minimum leg length = 10 in.Combination and Offset Elbows:▪ maximum leg lengths = 4 ft.▪ minimum leg length = 2.50 in. + (case size x .5)Critical Details:▪ Busway DRAWINGs must include all relevant dimensions▪ CENTERLINE dimensions are expected (please note any dimensions that are not center line dimensions)▪ WALLs and FLOORs must be located (wall & floor thickness must be included)▪ Locate the FRONT of all switchboards and provide the phasing of any existing boards (advise if any PADs arelocated under boards)▪ When using RISER plug-in busway please note the desired direction of the load side of bus plugs (G, A, B, C, Nfrom left to right will position the load side to the bottom and “UP is On” handle operation)▪ TRANSFORMER THROAT connections require complete details▪ Horizontal plug-in busway must be oriented with the A phase on top (bolt head on top)▪ In-Line Disconnect CUBICLEs are engineered to order. The FRONT of the cubicle must be specifiedOutdoor Busway:▪ Route busway to minimize outdoor busway run length▪ Avoid installing busway near exhaust pipes that may generate steam or caustic vaporsGeneral14 BUSWAYSYSTEMSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-47

Busway Power DistributionXJ-L Plug-In BuswaySelectionBusway Sections — CompleteSwitchboard or10 Foot Plug-in Sections 5 Foot Plug-in Sections 2 Foot Plug-in Sections Panelboard Stubs(flanged end)Catalog List Weight Catalog List Weight Catalog List Weight Catalog ListNumber Price $ (lbs.) Number Price $ (lbs.) Number Price $ (lbs.) Number Price $14BUSWAYSYSTEMS100 Ampere Busway — Copper Conductors 3-Phase, 3-Wire600 Volts or LessXC1003 618.00 42 XC10035 412.00 20 XC10032 240.00 8 XC1003FE 709.00XC1003G 709.00 42 XC10035G 474.00 21 XC10032G 277.00 9 XC1003FEG 798.00XC1003IG 722.00 44 XC10035IG 499.00 20 XC10032IG 281.00 8 XC1003FEIG 785.00XC1003GIG 837.00 44 XC10035GIG 578.00 21 XC10032GIG 325.00 9 XC1003FEGIG 888.003-Phase, 4-Wire600 Volts or LessXC1004 722.00 45 XC10045 474.00 21 XC10042 270.00 9 XC1004FE 774.00XC1004G 774.00 46 XC10045G 505.00 22 XC10042G 309.00 10 XC1004FEG 862.00XC1004IG 837.00 45 XC10045IG 547.00 21 XC10042IG 318.00 9 XC1004FEIG 875.00XC1004GIG 976.00 46 XC10045GIG 630.00 22 XC10042GIG 368.00 10 XC1004FEGIG 951.00225 Ampere Busway — Copper Conductors3-Phase, 3-WireX2003 837.00 56 X20035 470.00 27 X20032 258.00 12 X2003FE 963.00X2003G 951.00 58 X20035G 499.00 28 X20032G 298.00 13 X2003FEG 1103.00X2003IG 951.00 56 X20035IG 544.00 27 X20032IG 315.00 12 X2003FEIG 1115.00X2003GIG 1115.00 58 X20035GIG 671.00 28 X20032GIG 371.00 13 X2003FEGIG 1254.003-Phase, 4-Wire600 Volts or Less480 Volts or LessX2004 913.00 60 X20045 519.00 29 X20042 286.00 14 X2004FE 1052.00X2004G 932.00 62 X20045G 565.00 30 X20042G 326.00 15 X2004FEG 1166.00X2004IG 1115.00 60 X20045IG 594.00 29 X20042IG 326.00 14 X2004FEIG 1204.00X2004GIG 1204.00 62 X20045GIG 722.00 30 X20042GIG 401.00 15 X2004FEGIG 1330.00400 Ampere Busway — Copper Conductors3-Phase, 3-WireX4003 1127.00 69 X40035 676.00 35 X40032 338.00 15 X4003FE 1299.00X4003G 1296.00 75 X40035G 778.00 38 X40032G 389.00 16 X4003FEG 1487.00X4003IG 1353.00 79 X40035IG 811.00 40 X40032IG 405.00 17 X4003FEIG 1505.00X4003GIG 1466.00 84 X40035GIG 879.00 43 X40032GIG 439.00 18 X4003FEGIG 1693.003-Phase, 4-Wire600 Volts or Less480 Volts or LessX4004 1240.00 79 X40045 744.00 40 X40042 372.00 17 X4004FE 1429.00X4004G 1409.00 84 X40045G 845.00 43 X40042G 422.00 18 X4004FEG 1617.00X4004IG 1466.00 89 X40045IG 879.00 45 X40042IG 439.00 19 X4004FEIG 1635.00X4004GIG 1578.00 94 X40045GIG 947.00 48 X40042GIG 473.00 20 X4004FEGIG 1823.00 Plug-in sections do not include outlet covers.Plug-in outlet covers are available as an option.Catalog number XOC. List price $12.00 each. 100A XJ-L Aluminum sections are no longer available.However, 100A Copper sections are fully compatiblewith existing Aluminum busway. 100% Internal Ground bus included. 100% Isolated Ground bus included. 60% Internal Ground bus included.Hangers: Two hangers are furnished No Charge with each10' straight section. One hanger is furnished NoCharge with each 2' and 5' straight section, andelbows.Additional Hangers: Catalog Number XH2 — $34.50 each.14-48 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule BUSW

Busway Power DistributionXJ-L Plug-In BuswayBusway Accessories — Complete DevicesEnd TapCenter Tap90° Elbows End Closers Box Box Catalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $100 Ampere Busway — Copper Conductors 3-Phase, 3-Wire600 Volts or LessXC1003L 381.00 XE100 77.00 XC1003ETVB 858.00 — —XC1003LG 426.00 XE100 77.00 XC1003ETVBG 964.00 — —XC1003LIG 434.00 XE100 77.00 XC1003ETVBIG 950.00 — —XC1003LGIG 492.00 XE100 77.00 XC1003ETVBGIG 1072.00 — —3-Phase, 4-Wire600 Volts or LessXC1004L 430.00 XE100 77.00 XC1004ETVB 934.00 — —XC1004LG 449.00 XE100 77.00 XC1004ETVBG 1042.00 — —XC1004LIG 458.00 XE100 77.00 XC1004ETVBIG 1056.00 — —XC1004LGIG 516.00 XE100 77.00 XC1004ETVBGIG 1149.00 — —225 Ampere Busway — Copper Conductors3-Phase, 3-Wire600 Volts or LessX2003L 949.00 XE200 86.00 X2003ETVB 1164.00 X2003M 1242.00X2003LG 1000.00 XE200 86.00 X2003ETVBG 1333.00 X2003MG 1267.00X2003LIG 1025.00 XE200 86.00 X2003ETVBIG 1349.00 X2003MIG 1267.00X2003LGIG 1153.00 XE200 86.00 X2003ETVBGIG 1517.00 X2003MGIG 1292.003-Phase, 4-Wire480 Volts or LessX2004L 975.00 XE200 86.00 X2004ETVB 1271.00 X2004M 1254.00X2004LG 1050.00 XE200 86.00 X2004ETVBG 1409.00 X2004MG 1254.00X2004LIG 1216.00 XE200 86.00 X2004ETVBIG 1455.00 X2004MIG 1280.00X2004LGIG 1368.00 XE200 86.00 X2004ETVBGIG 1609.00 X2004MGIG 1305.00400 Ampere Busway — Copper Conductors3-Phase, 3-Wire600 Volts or LessX4003L 1281.00 XE400 89.00 X4003ETVB 1673.00 X4003M 1675.00X4003LG 1351.00 XE400 89.00 X4003ETVBG 1916.00 X4003MG 1843.00X4003LIG 1384.00 XE400 89.00 X4003ETVBIG 1938.00 X4003MIG 1934.00X4003LGIG 1556.00 XE400 89.00 X4003ETVBGIG 2180.00 X4003MGIG 2178.003-Phase, 4-Wire480 Volts or LessX4004L 1410.00 XE400 89.00 X4004ETVB 1841.00 X4004M 1843.00X4004LG 1479.00 XE400 89.00 X4004ETVBG 2083.00 X4004MG 2027.00X4004LIG 1513.00 XE400 89.00 X4004ETVBIG 2106.00 X4004MIG 2128.00X4004LGIG 1684.00 XE400 89.00 X4004ETVBGIG 2348.00 X4004MGIG 2396.00Selection14 BUSWAYSYSTEMS Elbows:Catalog Numbers as listed above are not complete.A1, 2, 3 or 4 suffix denoting configuration isrequired. Example: Catalog Number X1003L2 is anedgewise right hand elbow. Number Identification(1)=Flatwise Right Hand, (2)=Edgewise Right Hand,(3)=Flatwise Left Hand, (4)=Edgewise Left Hand.Flatwise and Edgewise refer to busway casing orhousing for XJ-L style busway. 100A XJ-L Aluminum sections are no longeravailable. However, 100A Copper sections are fullycompatible with existing Aluminum busway. 100% Internal Ground bus included. 100% Isolated Ground bus included. 60% Internal Ground bus included. Isolated ground kit for tap box W68113 — $46.00each. Center Tap Boxes are built on to a 2' straightsection. Catalog number X2004MG — Rated 400Amps. Center tap box for 100 amp use 200 AMPPlug-In Tap Box. Must use X2003MIG. Must use X2003MGIG. Must use X2004MIG. Must use X2004MGIG.Note: Wall and Floor Flanges: a two piece 14 gaugesteel collar which fits around busway housing.Flanges can be field assembled on buswayprior to or after busway installed. Wall or FloorFlange Catalog Number — WF1 for X100 andWF2 for X200 — $81.00 each. Packaged 5 percarton.Plug-In Tap Boxes or Feed-Ins Catalog List Catalog ListNumber Price $ Number Price $3-Phase, 3-Wire600 Volts or LessX103PB 242.00 X2003PB 616.00X103PBG 301.00 X2003PBG 823.00X103PBIG 305.00 —X103PBGIG 358.00 —3-Phase, 4-Wire480 Volts or LessX104PB 346.00 X2004PB 646.00X104PBG 401.00 X2004PBG 925.00X104PBIG 411.00 —X104PBGIG 464.00 —Discount Schedule BUSWSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-49

14BUSWAYSYSTEMSBusway Power DistributionBD ® Plug-In (225 — 1600 Ampere)225–1600 AmperesSelectionGround 90° Elbow Prefix Building ExpansionPlug In 10'– 0"BusFitting10'– 0"StraightAdderSwitch-StraightLengthSuffix GKBoardLength Case Shipping Connec-Ampere Catalog Dimensions Weight List List Price Catalog List tion List Catalog ListRating Number (inches) Lb./Ft. Price $ Per Foot $ Number Price $ Prefix Price $ Number Price $Copper3-Phase, 3-Wire600V or Less225 BDP302 4 1 ⁄16 x 8 7 ⁄8 09 1584.00 66. LDP302 1520.00 FEP302 1052.00 EJP302 3333.00400 BDP304 4 1 ⁄16 x 8 7 ⁄8 12 1 ⁄2 2395.00 66. LDP304 1761.00 FEP304 1216.00 EJP304 4372.00600 BDP306 4 1 ⁄16 x 8 7 ⁄8 13 1 ⁄2 3067.00 69. LDP306 1963.00 FEP306 1635.00 EJP306 5171.00800 BDP308 6 1 ⁄16 x 8 7 ⁄8 18 1 ⁄2 4486.00 69. LDP308 2394.00 FEP308 1977.00 EJP308 7299.001000 BDP310 6 1 ⁄16 x 8 7 ⁄8 22 4854.00 69. LDP310 2584.00 FEP310 2230.00 EJP310 7896.001350 BDP313 12 1 ⁄8 x 8 7 ⁄8 28 7338.00 98. LDP313 3573.00 FEP313 2940.00 EJP313 10341.001600 BDP316 12 1 ⁄8 x 8 7 ⁄8 29 7819.00 140. LDP316 3712.00 FEP316 3004.00 EJP316 11343.003-Phase, 4-Wire — Full Capacity Neutral480V or Less225 BDP4024 4 1 ⁄16 x 8 7 ⁄8 12 2053.00 66. LDP4024 1875.00 FEP4024 1191.00 EJP4024 4081.00400 BDP4044 4 1 ⁄16 x 8 7 ⁄8 14 1 ⁄2 3459.00 66. LDP4044 2293.00 FEP4044 1483.00 EJP4044 5677.00600 BDP4064 4 1 ⁄16 x 8 7 ⁄8 15 1 ⁄2 3929.00 69. LDP4064 2432.00 FEP4064 1837.00 EJP4064 6451.00800 BDP4084 8 1 ⁄8 x 8 7 ⁄8 28 5729.00 69. LDP4084 3167.00 FEP4084 2294.00 EJP4084 8694.001000 BDP4104 8 1 ⁄8 x 8 7 ⁄8 32 6704.00 69. LDP4104 3459.00 FEP4104 2420.00 EJP4104 10139.00Aluminum to Copper Cross ReferencePlug In 10'– 0"StraightLength CaseAmpere Catalog DimensionsRating Number (inches)Aluminum3-Phase, 3-Wire225 ABD302 4 1 ⁄16 x 8 7 ⁄8400 ABD304 4 1 ⁄16 x 8 7 ⁄8600 ABD306 6 1 ⁄16 x 8 7 ⁄8800 ABD308 6 1 ⁄16 x 8 7 ⁄8Plug In 10'– 0"StraightLength CaseAmpere Catalog DimensionsRating Number (inches)Copper3-Phase, 3-Wire225 BDP302 4 1 ⁄16 x 8 7 ⁄8400 BDP304 4 1 ⁄16 x 8 7 ⁄8600 BDP306 4 1 ⁄16 x 8 7 ⁄8800 BDP308 6 1 ⁄16 x 8 7 ⁄8“M” Rating / Standard RatingConversion Table1000/A Square Inch Standard 55°C Rating“M” RatingBDP225 —400 0600600 0800800 08001000 10001200 —1350 13501600 16002000 —2500 —3000 —4000 —1000 ABD310 12 1 ⁄8 x 8 7 ⁄81200 ABD312 12 1 ⁄8 x 8 7 ⁄83-Phase, 4-Wire — Full Capacity Neutral225 ABD4024 4 1 ⁄16 x 8 7 ⁄8400 ABD4044 4 1 ⁄16 x 8 7 ⁄8600 ABD4064 6 1 ⁄16 x 8 7 ⁄8800 ABD4084 8 1 ⁄8 x 8 7 ⁄81000 ABD4104 12 1 ⁄8 x 8 7 ⁄81200 ABD4124 12 1 ⁄8 x 8 7 ⁄81000 BDP310 6 1 ⁄16 x 8 7 ⁄81350 BDP313 12 1 ⁄8 x 8 7 ⁄81600 BDP316 12 1 ⁄8 x 8 7 ⁄83-Phase, 4-Wire — Full Capacity Neutral225 BDP4024 4 1 ⁄16 x 8 7 ⁄8400 BDP4044 4 1 ⁄16 x 8 7 ⁄8600 BDP4064 4 1 ⁄16 x 8 7 ⁄8800 BDP4084 8 1 ⁄8 x 8 7 ⁄81000 BDP4104 8 1 ⁄8 x 8 7 ⁄8For inches / millimeters conversion, see Application DataSection.Consult local sales office for five foot length.List prices are for standard construction, for higher shortcircuit ratings add an “H” after the “D” or “P” (ABDH302or BDPH302) and add 20% to the list price. Consult salesoffice for ratings.“GK” is an internal ground bus. For any other groundconfiguration, consult local sales office. List price is perfoot. Please use following footage for fittings:Elbow - 3'SWB - 1'End Cable Tap Box - 1'Center Cable Tap Box - 10'Building Expansion - 10'Right EdgewiseElbow (-2)Left EdgewiseElbow (-4)Suffix Description-1 Right Flatwise Appropriate suffix-2 Right Edgewise must be added to-3 Left Flatwise Elbow Catalog-4 Left Edgewise Number to order.Switchboard stub includes flange to cover cutoutin top of indoor switchboard and 6" of bus insideswitchboard. Connecting hardware supplied byswitchboard manufacturer.14-50 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule BUSW

Busway Power DistributionBD ® Plug-In (225 — 1600 Ampere)225–1600 AmperesSelectionCable Tap Box End Closure Hangers End Center Catalog List Catalog List Catalog List Catalog ListNumber Price $ Number Price $ Number Price $ Number Price $Copper3-Phase, 3-Wire600V or LessETB302 1927.00 CTB302 2813.00 ECP6 156.00 BDH10 63.00ETB304 2319.00 CTB304 3612.00 ECP6156.00ETB306 3409.00 CTB306 4614.00 ECP6 BDH10 63.00ETB308 3447.00 CTB308 6058.00 ECP10158.00ETB310 3472.00 CTB310 6388.00 ECP10 BDH10 63.00ETB313 3497.00 CTB313 9391.00 ECA10ETB316 3524.00 CTB316 9872.00 ECA103-Phase, 4-Wire — Full Capacity Neutral163.00 BDH12 65.00480V or LessETB4024 2155.00 CTB4024 3282.00 ECP6 156.00 BDH10 63.00ETB4044 2598.00 CTB4044 4677.00 ECP6ETB4064 3802.00 CTB4064 5462.00 ECP6156.00 BDH10 63.00ETB4084 3992.00 CTB4084 7274.00 ECA8 BDH12 65.00164.00ETB4104 4042.00 CTB4104 8238.00 ECA8BDH12 65.00Rod-Hanger Adapter (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UJ10012.70 each14 BUSWAYSYSTEMS Includes busway stub. Total length added to run is 2'for 225A and 400A aluminum or 225A–600A copper;3' for all others. Box is designed to connect to offsetbus-bar ends. When it is to be connected to straightbus-bar ends, adapter will be furnished upon request. Must be factory-assembled to busway. Completedevice includes 10' busway. Two hangers included free of charge with eachbusway section, elbow, tee and cross.Discount Schedule BUSWSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-51

14BUSWAYSYSTEMSBusway Power DistributionXL-U ® Aluminum (225–5000 Ampere)225–5000 Amperes / 600 Volts or LessNon-Ventilated 225–600 AmperesSelectionBusway Catalog Number List Price Per Foot $ Accessory Charge $Switch-Ground Board Trans- Trans-Basic Case Shipping Feeder Plug-In Bus 90° Connec- Trans- former formerAmpere Catalog Dimensions Weight Busway Busway Adder Elbow Tee Cross tion former Tap Tap RoofRating Number (inches) Lb./Ft. Suffix F Suffix P Suffix G Suffix L Suffix T Suffix X Suffix S Throat 1-3 Phase 3-1 Phase Flange3-Pole225 UH302AB 4 1 ⁄2 x 10 8 134. 134. 47. 747.400 UH304AB 4 1 ⁄2 x 10 9 167. 167. 47. 1076. 1280. 1533. 747. — — — —600 UH306AB 5 1 ⁄2 x 10 10 208. 208. 52. 747.4-Pole Full Neutral225 UH502AB 4 1 ⁄2 x 10 8 157. 157. 45. 844.400 UH504AB 4 1 ⁄2 x 10 9 195. 195. 45. 1201. 1416. 1487. 844. — — — —600 UH506AB 5 1 ⁄2 x 10 10 264. 264. 48. 844.Note: For non-ventilated 225-600A busway with insulated bus bars add 15%.Ventilated 800–5000 Amperes With Ground BusBusway Sections Complete List Price Per Foot $ Accessory Charge $Ampere Rating SwitchEdge- Flat- Outdoor Board Trans- Transwisewise Basic Case Shipping Feeder Plug-In Feeder 90° Connec- Trans- former formerCatalog Dimensions Weight Busway Busway Suffix Elbow Tee Cross tion former Tap Tap RoofNumber (inches) Lb./Ft. Suffix F Suffix P W Suffix L Suffix T Suffix X Suffix S Throat 1-3 Phase 3-1 Phase Flange3-Pole800 800 UH308AV 4 1 ⁄2 x 10 10 297. 311. 357.785. 6679. 1444. 3599.1000 800 UH310AV 41128. 1368. 1558.⁄2 x 10 11 335. 349. 403. 785. 6679. 1444. 3599.2585.1200 1000 UH312AV 5 1 ⁄2 x 10 12 459. 472. 549.1065. 9048. 1951. 4879.1533. 1938. 2268.1350 1200 UH313AV 5 1 ⁄2 x 10 13 525. 540. 630. 1065. 9048. 1951. 4879.1600 1350 UH316AV 7 1 ⁄2 x 10 16 646. 659. 773.1065. 9048. 1951. 4879.2000 1600 UH320AV 71533. 1938. 2268.⁄2 x 10 19 773. 785. 924. 1065. 9048. 1951. 4879.3510.2500 2000 UH325AV 9 1 ⁄2 x 10 23 950. 962. 1141. 1533. 1938. 2268. 1065. 9048. 1951. 4879. 3510.3000 3000 UH330AV 7 1 ⁄2 x 20 5 ⁄8 32 1076. 1090. 1292. 1938. 2281. 2395. 1356. 11406. 2458. 6159. 4423.4000 3500 UH340AV 9 1 ⁄2 x 20 5 ⁄8 41 1482. 1495. 1774. 1938. 2281. 2395. 1356. 11406. 2458. 6159.5000 4000 UH350AV 94423.1 ⁄2 x 20 5 ⁄8 45 1964. 1976. 2357. 1938. 2281. 2395. 1356. 11406. 2458. 6159.4-Pole Full Neutral800 800 UH508AV 4 1 ⁄2 x 10 11 351. 365. 421. 1648. 1648. 1964. 962. 6944. 1533. 3662.1000 800 UH510AV 4 1 ⁄2 x 10 12 440. 453. 527. 1648. 1648. 1964. 962. 6944. 1533. 3662.1200 1000 UH512AV 5 1 ⁄2 x 10 14 552. 566. 659. 2256.1318. 7489. 2155. 4638.2256. 2698.1350 1200 UH513AV 5 1 ⁄2 x 10 15 634. 646. 760. 2256. 1318. 7489. 2155. 4638.1600 1350 UH516AV 7 1 ⁄2 x 10 18 760. 773. 899.2256. 2698. 1318. 7489. 2155. 4638.2000 1600 UH520AV 72256.1 ⁄2 x 10 21 950. 962. 1141. 2256. 2698. 1318. 8453. 2559. 5589.2500 2000 UH525AV 9 1 ⁄2 x 10 26 1153. 1166. 1381. 2256. 2256. 2698. 1318. 9580. 3523. 7693. 3510.3000 3000 UH530AV 7 1 ⁄2 x 20 5 ⁄8 35 1343. 1356. 1610. 2698. 2698. 3218. 1583. 9580. 4169. 7693. 4423.4000 3500 UH540AV 9 1 ⁄2 x 20 5 ⁄8 47 1799. 1812. 2166.5000 4000 UH550AV 92698. 2698. 3218. 1583. 13712. 4169. 9618. 4423.1 ⁄2 x 20 5 ⁄8 52 2737. 2750. 3282.2585.3510.For inches / millimeters conversion, see Application DataSection.Note: To form complete catalog number, use basiccatalog number and substitute suffix of requireditem. Example: Basic busway Catalog NumberU316AV— accessory switchboard stub with groundbus U316AVSG.To price complete device, add the following feederbusway footage to the labor charges shown:XL-U Elbow 2' XLU-EXP Section 4'XL-U Tee 3' XL-U SWBD Stub 1'XL-U Cross 4' XL-U Reducer 4' List prices are for standard construction for higher shortcircuit rating add an “HH” after the “U” (UHH302ABP)and add 45% to the list price. Consult sales office foravailable ratings. For elbows other than 90°, accessory charge is doubled. Switchboard stub includes flange to cover cutout intop of indoor switchboard and 8" of bus insideswitchboard. Connecting hardware supplied byswitchboard manufacturer. Ventilated XL-U busway has two ratings; see above foredgewise or flatwise mounting.XL-U also comes in nonventilated housing; consult localsales office. Transformer throat connection includes gasketed boxsized to match throat plus flexible straps and bolts.No Busway footage is included. For connection totransformers not manufactured by Siemens,consult factory.14-52Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule BUSW

Busway Power DistributionXL-U ® Aluminum (225–5000 Ampere)225–5000 Amperes / 600 Volts or LessNon-Ventilated 225–600 AmperesAccessory Charge $ Complete Device Price $SelectionNon Expansion Tap Box Wall Flange Floor Support End Closure Hangers Ampere Fusible Fusible Section End Center Catalog List Catalog List Catalog List Draft Weather Catalog ListRating Reducer Reducer Suffix J Suffix B Suffix M Number Price $ Number Price $ Number Price $ Barrier Stop Number Price $3-Pole225 — — 1888. 1330. 1292. UF145 226.00 UFS145 422.00 UE145 — 422. 849. UH145 —400 747. 3054. 2142. 1989. 1292. UF145 226.00 UFS145 422.00 UE145 293.00 422. 849. UH145 65.00600 785. 3472. 2332. 2839. 1292. UF145 226.00 UFS145 422.00 UE155 293.00 422. 849. UH155 65.004-Pole Full Neutral225 — — 1888. 1545. 1507. UF145 226.00 UFS145 422.00 UE145 293.00 422. 1051. UH145 65.00400 747. 3054. 2142. 1723. 1507. UF145 226.00 UFS145 422.00 UE145 293.00 422. 1051. UH145 65.00600 785. 3472. 2332. 1825. 1507. UF145 226.00 UFS145 422.00 UE155 293.00 422. 1051. UH155 65.00Ventilated 800–5000 Amperes with Ground BusAmpere Accessory Charge $ Complete Device Price $RatingNon Expansion Tap Box Wall Flange Floor Support End Closure HangersEdge-wise Fusible Fusible Section End Center Catalog List Catalog List Catalog List Draft Weather Catalog ListReducer Reducer Suffix J Suffix B Suffix M Number Price $ Number Price $ Number Price $ Barrier Stop Number Price $3-Pole800 1051. 4410. 3142. 3054. 1356. UF145 226.00 UFS145 422.00 UE145 293.00 422. 899. UH145 65.001000 1051. 4410. 3142. 3054. 1356. UF145 226.00 UFS145 422.00 UE145 293.00 422. 899. UH145 65.001200 1419. 5957. 4257. 4131. 1761. UF155 226.00 UFS145 422.00 UE155 293.00 422. 899. UH155 65.001350 1419. 5957. 4257. 4131. 1761. UF155 226.00 UFS145 422.00 UE155 293.00 422. 899. UH155 65.001600 1419. 5957. 4257. 4131. 1761. UF175 323.00 UFS179 506.00 UE175 715.00 506. 1305. UH175 80.002000 1419. 5957. 4257. 4131. 1761. UF175 323.00 UFS179 506.00 UE175 715.00 506. 1305. UH175 80.002500 1419. 5957. 4257. 4473. 1761. UF195 323.00 UFS179 506.00 UE175 715.00 506. 1305. UH195 80.003000 1787. 7514. 5374. 4613. 5969. UF275 1103.00 UFS279 709.00 UE275 1147.00 709. 1711. UH275 96.004000 1787. 7514. 5374. 4854. 6235. UF295 1103.00 UFS279 709.00 UE295 1147.00 709. 1711. UH295 96.005000 1787. 7514. 5374. 4854. 6235. UF295 1103.00 UFS279 709.00 UE295 1147.00 709. 1711. UH295 96.004-Pole Full Neutral800 1204. 5069. 3611. 3472. 1610. UF145 226.00 UFS145 422.00 UE145 293.00 422. 1153. UH145 65.001000 1204. 5069. 3611. 3472. 1610. UF145 226.00 UFS145 422.00 UE145 293.00 422. 1153. UH145 65.001200 1635. 6843. 4892. 4537. 2128. UF155 226.00 UFS145 422.00 UE155 293.00 422. 1153. UH155 65.001350 1635. 6843. 4892. 4537. 2128. UF155 226.00 UFS145 422.00 UE155 293.00 422. 1153. UH155 65.001600 1635. 6843. 4892. 4537. 2128. UF175 323.00 UFS179 506.00 UE175 715.00 506. 1673. UH175 80.002000 1635. 6843. 4892. 4537. 2128. UF175 323.00 UFS179 506.00 UE175 715.00 506. 1673. UH175 80.002500 2052. 6843. 4892. 5424. 2128. UF195 323.00 UFS179 506.00 UE195 715.00 506. 1673. UH195 80.003000 2052. 8643. 5424. 5766. 7350. UF275 1103.00 UFS279 709.00 UE275 1147.00 709. 2052. UH275 96.004000 2052. 8643. 6184. 6045. 7629. UF295 1103.00 UFS279 709.00 UE295 1147.00 709. 2052. UH295 96.005000 2052. 8643. 6184. 6045. 7629. UF295 1103.00 UFS279 709.00 UE295 1147.00 709. 2052. UH295 96.0014 BUSWAYSYSTEMSFor inches / millimeters conversion, see Application DataSection. For reducer, consult page 14-2 (J). On fusible reducersno fuses are supplied. Tap boxes furnished with standard screw-typemechanical lugs. For compression lugs add 30% to listprice. Floor and ceiling flanges are ordered by description.Price the same as wall flanges. For rod-hanger adapter UJ100 see page 14-51.Discount Schedule BUSWSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-53

Busway Power DistributionXL-U ® Copper (225–6500 Amperes)225–6500 Amperes / 600 Volts or LessNon-Ventilated 225–600 AmperesSelectionBusway Catalog Number List Price Per Foot $ Accessory Charge $Switch-Ground Board Trans- Trans-Basic Case Shipping Feeder Plug-In Bus 90° Connec- Trans- former formerAmpere Catalog Dimensions Weight Busway Busway Adder Elbow Tee Cross tion former Tap Tap RoofRating Number (inches) Lb./Ft. Suffix F Suffix P Suffix G Suffix L Suffix T Suffix X Suffix S Throat 1-3 Phase 3-1 Phase Flange3-Pole225 UH302CB 8 166. 166. 72. — — — 747.400 UH304CB 4 1 ⁄2 x 10 12 248. 248. 72. 1076. 1280. 1533. 899. — — — —600 UH306CB 13 327. 327. 74. — — — 1051.14BUSWAYSYSTEMS4-Pole Full Neutral225 UH502CB 9 227. 227. 72. — — — 899.400 UH504CB 4 1 ⁄2 x 10 13 370. 370. 72. 1280. 1533. 1787. 1076. — — — —600 UH506CB 15 424. 424. 74. — — — 1254.Ventilated 800–6500 Amperes With Ground BusBusway Sections Complete List Price Per Foot $ Accessory Charge $Ampere Rating SwitchEdge- Flat- Outdoor Board Trans- Transwisewise Basic Case Shipping Feeder Plug-In Feeder 90° Connec- Trans- former formerCatalog Dimensions Weight Busway Busway Suffix Elbow Tee Cross tion former Tap Tap RoofNumber (inches) Lb./Ft. Suffix F Suffix P W Suffix L Suffix T Suffix X Suffix S Throat 1-3 Phase 3-1 Phase Flange3-Pole800 800 UH308CV 4 1 ⁄2 x 10 12 490. 504. 587. 1128. 1368. 1558. 1166. 6679. 1444. 3599. 2585.1000 1000 UH310CV 4 1 ⁄2 x 10 15 510. 524. 612. 1128. 1368. 1558. 1166. 6679. 1444. 3599. 2585.1200 1000 UH312CV 4 1 ⁄2 x 10 16 684. 697. 811. 1128. 1368. 1558. 1166. 6679. 1444. 3599. 2585.1350 1200 UH313CV 4 1 ⁄2 x 10 19 798. 811. 962. 1128. 1368. 1558. 1166. 6679. 1444. 3599. 2585.1600 1350 UH316CV 5 1 ⁄2 x 10 23 899. 912. 1076. 1533. 1850. 2117. 1571. 9048. 1951. 4879. 3510.2000 1600 UH320CV 5 1 ⁄2 x 10 26 1153. 1166. 1381. 1533. 1850. 2117. 1571. 9048. 1951. 4879. 3510.2500 2000 UH325CV 7 1 ⁄2 x 10 34 1457. 1482. 1761. 1533. 1850. 2117. 1571. 9048. 1951. 4879. 3510.3000 2500 UH330CV 9 1 ⁄2 x 10 41 1596. 1610. 1913. 1533. 1850. 2117. 1571. 9048. 1951. 4879. 3510.4000 4000 UH340CV 7 1 ⁄2 x 20 5 ⁄8 57 2294. 2306. 2750. 1938. 2332. 2662. 1976. 11406. 2458. 6159. 4423.5000 4500 UH350CV 7 1 ⁄2 x 20 5 ⁄8 70 2763. 2775. 3320. 1938. 2332. 2662. 1976. 11406. 2458. 6159. 4423.6000 5000 UH360CV 9 1 ⁄2 x 20 5 ⁄8 85 3320. 3346. 3992. 1938. 2332. 2662. 1976. 11406. 2458. 6159. 4423.6500 5500 UH365CV 9 1 ⁄2 x 20 5 ⁄8 98 3485. 3497. 4182. 1938. 2332. 2662. 1976. 11406. 2458. 6159. 4423.4-Pole Full Neutral800 800 UH508CV 4 1 ⁄2 x 10 14 646. 659. 1153. 1381. 1673. 1901. 1419. 6944. 1520. 3662. 2585.1000 1000 UH510CV 4 1 ⁄2 x 10 18 735. 747. 887. 1381. 1673. 1901. 1419. 6944. 1520. 3662. 2585.1200 1000 UH512CV 4 1 ⁄2 x 10 19 899. 912. 1076. 1381. 1673. 1901. 1419. 6944. 1520. 3662. 2585.1350 1200 UH513CV 4 1 ⁄2 x 10 23 1013. 1038. 1229. 1381. 1673. 1901. 1419. 6944. 1520. 3662. 2585.1600 1350 UH516CV 5 1 ⁄2 x 10 28 1229. 1242. 1469. 1888. 2281. 2559. 1938. 7489. 2155. 4638. 3510.2000 1600 UH520CV 5 1 ⁄2 x 10 30 1482. 1495. 1774. 1888. 2281. 2559. 1938. 7489. 2155. 4638. 3510.2500 2000 UH525CV 7 1 ⁄2 x 10 42 1799. 1812. 2166. 1888. 2281. 2559. 1938. 7489. 2155. 4638. 3510.3000 2500 UH530CV 7 1 ⁄2 x 10 61 2319. 2332. 2788. 1888. 2281. 2559. 1938. 7489. 2155. 4638. 3510.4000 4000 UH540CV 7 1 ⁄2 x 20 5 ⁄8 70 2990. 3003. 3586. 2268. 2737. 3041. 2319. 13712. 3523. 7693. 4423.5000 4500 UH550CV 7 1 ⁄2 x 20 5 ⁄8 86 3624. 3637. 4347. 2268. 2737. 3041. 2319. 13712. 3523. 7693. 4423.6000 5000 UH560CV 9 1 ⁄2 x 20 5 ⁄8 105 4436. 4448. 5322. 2268. 2737. 3041. 2319. 13712. 4169. 9618. 4423.6500 5500 UH565CV 9 1 ⁄2 x 20 5 ⁄8 122 4790. 4802. 5740. 2268. 2737. 3041. 2319. 13712. 4169. 9618. 4423.“M” Rating / Standard RatingConversion Table1000/A Square Inch“M” Rating22540060080010001200135016002000250030004000Standard 55°C RatingXL-U——800120013501600200025002500300040005000Note: To form complete catalog number, use basic catalognumber and substitute suffix of required item.Example: Basic busway Catalog Number U316CV—accessory switchboard stub with ground busU316CVSG.To price complete device, add the following feeder buswayfootage to the labor charges shown:XL-U Elbow 2' XLU-EXP Section 4'XL-U Tee 3' XL-U SWBD Stub 1'XL-U Cross 4' XL-U Reducer 4' List prices are for standard construction for higher shortcircuit rating add an “HH” after the “U” (UHH302CBPand add 45% to the list price. Consult sales office foravailable ratings. For elbows other than 90°, accessory charge is doubled. Switchboard stub includes flange to cover cutout in top ofindoor switchboard and 8'' of bus inside switchboard.Connecting hardware supplied by switchboard manufacturer. Ventilated XL-U busway has two ratings; see above foredgewise or flatwise mounting. XL-U also comes innonventilated housing; consult local sales office. Transformer throat connection includes gasketed boxsized to match throat plus flexible straps and bolts.No Busway footage is included. For connection totransformers not manufactured by Siemens, consultfactory. Ventilated busway has aluminum ground bus asstandard. For copper ground bus multiply footage priceby 1.05.14-54Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule BUSW

Busway SystemsXL-U ® Copper (225–6500 Amperes)225–6500 Amperes / 600 Volts or LessNon-Ventilated 225–600 AmperesSelectionAccessory Charge $ Complete Device Price $Non Expansion Tap Box Wall Flange Floor Support End Closure Hangers Ampere Fusible Fusible Section End Center Catalog List Catalog List Catalog List Draft Weather Catalog ListRating Reducer Reducer Suffix J Suffix B Suffix M Number Price $ Number Price $ Number Price $ Barrier Stop Number Price $3-Pole225 — — 1850. 1381. 1267. UF145 226.00 UFS145 422.00 UE145 293.00 414. 823. UH145 65.00400 735. 3003. 2103. 2078. 1267. UF145 226.00 UFS145 422.00 UE145 293.00 414. 823. UH145 65.00600 735. 3003. 2103. 2965. 1267. UF145 226.00 UFS145 422.00 UE145 293.00 414. 823. UH145 65.004-Pole Full Neutral225 — — 2205. 1698. 1482. UF145 226.00 UFS145 422.00 UE145 293.00 414. 1038. UH145 65.00400 874. 3573. 2509. 1863. 1482. UF145 226.00 UFS145 422.00 UE145 293.00 414. 1038. UH145 65.00600 874. 3573. 2509. 2002. 1482. UF145 226.00 UFS145 422.00 UE145 293.00 414. 1038. UH145 65.00Ventilated 800–6500 Amperes with Ground BusAmpereRatingEdgewiseAccessory Charge $ Complete Device Price $Non Expansion Tap Box Wall Flange Floor Support End Closure Hangers Fusible Fusible Section End Center Catalog List Catalog List Catalog List Draft Weather Catalog ListReducer Reducer Suffix J Suffix B Suffix M Number Price $ Number Price $ Number Price $ Barrier Stop Number Price $3-Pole800 1026. 4322. 3092. 3180. 1330. UF145 226.00 UFS145 422.00 UE145 293.00 414. 887. UH145 65.001000 1026. 4322. 3092. 3180. 1330. UF145 226.00 UFS145 422.00 UE145 293.00 414. 887. UH145 65.001200 1026. 4322. 3092. 4245. 1330. UF145 226.00 UFS145 422.00 UE145 293.00 414. 887. UH145 65.001350 1026. 4322. 3092. 4245. 1330. UF145 226.00 UFS145 422.00 UE145 293.00 414. 887. UH145 65.001600 1394. 5854. 4182. 4423. 1723. UF155 226.00 UFS145 422.00 UE155 293.00 414. 887. UH155 65.002000 1394. 5854. 4182. 4423. 1723. UF155 226.00 UFS145 422.00 UE155 293.00 414. 887. UH155 65.002500 1394. 5854. 4182. 4423. 1723. UF175 323.00 UFS179 506.00 UE175 715.00 496. 1280. UH175 80.003000 1394. 5854. 4182. 4423. 1723. UF195 323.00 UFS179 506.00 UE195 715.00 496. 1280. UH195 80.004000 1761. 7388. 5271. 4701. 6679. UF275 1103.00 UFS279 709.00 UE275 1147.00 697. 1685. UH275 96.005000 1761. 7388. 5271. 4701. 6679. UF275 1103.00 UFS275 709.00 UE275 1147.00 697. 1685. UH275 96.006000 1761. 7388. 5271. 4701. 6679. UF295 1103.00 UFS279 709.00 UE295 1147.00 697. 1685. UH295 96.006500 1761. 7388. 5271. 4701. 6679. UF295 1103.00 UFS279 709.00 UE295 1147.00 697. 1685. UH295 96.0014 BUSWAYSYSTEMS800 1178. 4968. 3548. 3662. 1571. UF145 226.00 UFS145 422.00 UE145 293.00 414. 1128. UH145 65.001000 1178. 4968. 3548. 3662. 1571. UF145 226.00 UFS145 422.00 UE145 293.00 414. 1128. UH145 65.001200 1178. 4968. 3548. 3662. 1571. UF145 226.00 UFS145 422.00 UE145 293.00 414. 1128. UH145 65.001350 1178. 4968. 3548. 3662. 1571. UF145 226.00 UFS145 422.00 UE145 293.00 414. 1128. UH145 65.001600 1596. 6729. 4815. 5082. 2090. UF155 226.00 UFS145 422.00 UE155 293.00 414. 1128. UH155 65.002000 1596. 6729. 4815. 5082. 2090. UF155 226.00 UFS145 422.00 UE155 293.00 414. 1128. UH155 65.002500 1596. 6729. 4815. 5082. 2090. UF175 226.00 UFS179 506.00 UE175 715.00 496. 1648. UH175 80.003000 1596. 6729. 4815. 5082. 2090. UF195 226.00 UFS179 506.00 UE195 715.00 496. 1648. UH195 80.004000 2027. 8491. 6058. 7034. 9353. UF275 1103.00 UFS279 709.00 UE275 1147.00 697. 2014. UH275 96.005000 2027. 8491. 6058. 7034. 9353. UF275 1103.00 UFS279 709.00 UE275 1147.00 697. 2014. UH275 96.006000 2027. 8491. 6058. 7034. 9353. UF295 1103.00 UFS279 709.00 UE295 1147.00 1026. 2014. UH295 96.006500 2027. 8491. 6058. 7034. 9353. UF295 1103.00 UFS279 709.00 UE295 1147.00 1026. 2014. UH295 96.00For inches / millimeters conversion, see Application DataSection. For reducer, consult page 14-2 (J). On fusible reducersno fuses are supplied. Tap boxes furnished with standard screw-typemechanical lugs. For compression lugs add 30% to listprice. Floor and ceiling flanges are ordered by description.Price the same as wall flanges. For rod-hanger adapter UJ100 see page 14-51.Discount Schedule BUSWSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-55

14BUSWAYSYSTEMSBusway Power DistributionXJ-L Plug-In UnitsCircuit Breaker Enclosure XQ45XQ Circuit Breaker EnclosuresFront OperableSelectionEnclosures Only 3-Phase, 3-Wire3-Phase, 4-WireBreakerBreaker AC Ampere Catalog List Catalog ListType Volts Rating Number Price $ Number Price $15–50 XQ35 184.00 XQ45 198.00QP and BQ 120/24015–50 XQ35R 264.00 XQ45R 288.00Circuit Breaker Bus Plugs —Front Operable3-Phase, 3-Wire3-Phase, 4-WireBreaker Enclosure Only Enclosure OnlyBreaker AC Ampere Catalog List Catalog ListType Volts Rating Number Price $ Number Price $ED2 240ED4 480ED6 60015–5060–10015–5060–10015–5060–100Operable Through Cover3-Phase, 3-Wire3-Phase, 4-WireEnclosure OnlyEnclosure OnlyBreakerBreaker AC Ampere Catalog List Catalog List Catalog List Catalog ListType Volts Rating Number Price $ Number Price $ Number Price $ Number Price $ED2 240ED4 48015–5060–10015–5060–100Circuit Breaker Plugs —Floor OperableXEC3100 408.00 XEC3100IG 461.00 XEC4100 517.00 XEC4100IG 570.00XLEC3100 649.00 XLEC4100 794.00Circuit Breaker Bus Plug(Receptacles and coverssupplied by installer)XQ45RFusible Vacu-Break Switch Plugs Floor Operable3-Pole4-PoleAmpereVolts Rating Catalog Number List Price $ Catalog Number List Price $30 XLVB321 706.00 XLVB421N 880.00240 60 XLVB322 775.00 XLVB422N 902.00100 XLVB323 1181.00 XLVB423N 1320.0030 XLVB351 775.00 XLVB451N 915.00600 60 XLVB352 845.00 XLVB452N 949.00100 XLVB353 1203.00 XLVB453N 1355.00Circuit Breaker Bus PlugFront-operableXEC4100For inches / millimeters conversion, see Application DataSection. XEQH floor-operating handle with “ON-OFF” labels,$44.50 each. Designed for 2 or 3-pole breakers only.Standard package 10 per carton. Ground kit for bonded ground Catalog Number W62890.List price $56.00. Ground kit for isolated ground Catalog Number W68101.List price $59.00. XQ plug designed for 1, 2 or 3-pole breakers use. Enclosures available from stock. For factory installedbreakers, add enclosure and breaker prices together andadd 20% to the total. When ordering circuit breaker busplugs complete with breaker, factory-installed, allowtime for assembly and SPECIFY enclosure frame size,phase and ampere rating.Example: One XEC3100—ED2—3P—70A—factoryassembled. “On-Off” bus plug, pressure-sensitive labels, W47185:$6.20 per pair. Ground kit bonded ground Catalog Number W62891.List price $56.00. W63810 required when used on “XL” busway list price$16.20. Breaker cover for XQ Bus Plugs, XQBRKCVR: List Price$57.00.14-56Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule BPLU

Busway Power DistributionXL-X ® , XL-U ® , BD ® Plug-In UnitsCircuit Breaker PlugsFloor Operable3-Phase, 3-WireEnclosure Only 3-Phase, 4-WireEnclosure Only SelectionCatalog Catalog Catalog Number Catalog Catalog Catalog NumberBreaker AC Ampere Number Number List BD List Number Number List BD ListType Volts Rating XL-X XL-U Price $ Plug-In Price $ XL-X XL-U Price $ Plug-In Price $ED2 240ED4 480ED615–6070–10015–60 REC3100G UEC3100G 833.00 BEC3100 671.00 REC4100G UEC4100G 995.00 BEC4100 822.0070–10015–6070–100FD6, FXD 600 70–250 RFC3250G UFC3250G 1748.00 BFC3250 1562.00 RFC4250G UFC4250G 2025.00 BFC4250 1828.00JXD6 200–400JXD2 240 200–400 RJC3400G UJC3400G 4270.00 BJC3400 4039.00 RJC4400G UJC4400G 4758.00 BJC4400 4886.00JD6 200–400LXD6 450–600 RLC3600G ULC3600G 4514.00 BLC3600 4191.00 RLC4600G ULC4600G 5058.00 BLC4600 4990.00LD6MD6600250–600 400–600 RMC3800G UMC3800G 5266.00 BMC3800 5012.00 RMC4800G UMC4800G 5994.00 BMC4800 5792.00700–800 I-T-E Fusible Vacu-Break ® Switch Plugs Floor-Operable with Line Terminal Protection3-Phase, 3-Wire3-Phase, 4-WireHorsepower Catalog Horsepower CatalogRatings Catalog Catalog Number Number Ratings, AC Catalog Number NumberAmpere Standard Maximum List BD List Standard Maximum List BD ListVolts Rating (NEC) (Time Delay) XL-X XL-U Price $ Plug-In Price $ (NEC) (Time Delay) XL-X XL-U Price $ Plug-In Price $030 003 007 1 ⁄2 RV321G UV321G 873.00 BOS14321 763.00 003 007 1 ⁄2 RV421G UV421G 1017.00 BOS16421 937.00060 007 1 ⁄2 015 RV322G UV322G 950.00 BOS14322 822.00 007 1 ⁄2 015 RV422G UV422G 1040.00 BOS16422 961.00100 015 030 RV323G UV323G 1376.00 BOS14323 1251.00 015 030 RV423G UV423G 1510.00 BOS16423 1389.00250 ACor 200 025 060 RV324G UV324G 2225.00 BOS14324 2118.00 025 060 RV424G UV424G 2539.00 BOS16424 2431.00250 DC 400 050 125 RV325G UV325G 5569.00 BOS14325 5486.00 050 125 RV425G UV425G 6240.00 BOS16425 6437.00600 075 200 RV326G UV326G 8051.00 BOS14326 7604.00 075 200 RV426G UV426G 8230.00 BOS16426 8463.00030 007 1 ⁄2 020 RV361G UV361G 950.00 BOS14351 822.00 005 015 RV461G UV461G 1063.00 BOS16451 971.00060 015 050 RV362G UV362G 1017.00 BOS14352 891.00 015 030 RV462G UV462G 1096.00 BOS16452 1007.00100 030 075 RV363G UV363G 1398.00 BOS14353 1274.00 025 060 RV463G UV463G 1554.00 BOS16453 1424.00600 AC 200 060 150 RV364G UV364G 2359.00 BOS14354 2246.00 050 125 RV464G UV464G 2605.00 BOS16454 2500.00400 125 350 RV365G UV365G 5938.00 BOS14355 5856.00 100 150 RV465G UV465G 6397.00 BOS16455 6599.00400 125 350 RV365SG UV365SG 5938.00 — — 100 150 RV465SG UV465SG 6397.00 — —600 200 500 RV366G UV366G 7996.00 BOS14356 7662.00 150 400 RV466G UV466G 8287.00 BOS16456 8521.0014 BUSWAYSYSTEMSFuse Adapter Kits — RV and UV240V AC/250V DCClass “J” Class “T” Class “R”Amper- Catalog List Catalog List Catalog Listage Number Price $ Number Price $ Number Price $30—— W56626 72.0060—— W56628 91.00100— TFAK32 76.00 W55365 61.00200— TFAK42 102.00 W55366 61.00400— TFAK52 102.00 W55367 91.00600 W49813 459.00 TFAK62 120.00 W55368 91.00600V30—— W56627 101.0060—— W56629 85.00100— TFAK35 120.00 W55365 61.00200— TFAK45 143.00 W55366 61.00400— TFAK55 151.00 W55367 91.00600 W49813 459.00 TFAK65 174.00 W55368 91.00Field Addable Ground Kits forBD Bus PlugsFusibleAmpere Catalog ListRating Number Price $30–60 W63231 109.00100 W63232 154.00200 W63233 154.00400 W63234 173.00600 W63234 173.00Circuit BreakerBEC W63553 173.00BFC W63554 173.00BJC W63238 263.00BLC W63238 263.00BMC W73534 168.00Note: These are for use on busway with internal groundbus manufactured after March, 1986. For ground kitsprior to this date, consult local sales office.Fuse Adapter Kits — BOS240V AC/250V DCClass “J” Class “T” Class “R”Amper- Catalog List Catalog List Catalog Listage Number Price $ Number Price $ Number Price $30—— W56626 72.0060—— W56628 91.00100 W49827 131.00 TFAK32 76.00 W55365 61.00200 W49819 131.00 TFAK42 102.00 W55366 61.00400 W49814 330.00 TFAK52 102.00 W55367 91.00600 W49813 459.00 TFAK62 120.00 W55368 91.00600V30 W49832 163.00 — W56627 101.0060 W49830 163.00 — W56629 85.00100 W49828 131.00 TFAK35 120.00 W55365 61.00200 W49818 163.00 TFAK45 143.00 W55366 61.00400 W49816 395.00 TFAK55 151.00 W55367 91.00600 W49815 330.00 TFAK65 174.00 W55368 91.00 Grounding Finger — See table. Enclosures available from stock. For factory installedbreakers, add enclosure and breaker prices together andadd 20% to the total. When ordering circuit breaker busplugs complete with breaker, factory-installed, allowtime for assembly and SPECIFY enclosure frame size,phase and ampere rating.Example: One UEC3100—ED4—3P—70A–factoryassembled Bus plugs 400A and smaller require one plug-inopening. 600–800A require two plug-in openings. To order 400A fusible plug with increased wire space,add “S” to the catalog number.Example: UV365SG, UV465SG. Channel Spacers — Must be used with bus plugsmounted on 600, 800, or 1000 ampere ABD busway oron 800 or 1000 ampere BDP busway. Catalog NumberW37940 list price $8.90 When BD busway capacity exceeds 400A for aluminumor 600A for copper, capacity must be specified to obtainproper number and arrangement of neutral fingers. Not required.Discount Schedule BPLUSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-57

14BUSWAYSYSTEMSBusway Power DistributionXL-X ® , XL-U ® and BD ® Plug-In UnitsShipping Weights — PoundsFor Circuit Breaker Bus Plugs Only3-Phase, 3-Wire3-Phase, 4-WireEnclosure Complete Enclosure CompleteOnly Assembly Only AssemblyBreaker Ampere XL-U BD, XL-U BD, XL-U BD, XL-U BD,Type Rating XL-X LO-X XL-X LO-X XL-X LO-X XL-X LO-XED2,ED4, 15–100 12 14 13 9 13 15 14 10ED6FD6 70–250 1 27 51 37 45 28 55 38JXD6 200–400 90 35 102 57 95 36 107 58JXD2 200–400 90 35 102 57 95 36 107 58JD6 200–400 95 39 117 61 100 40 122 62LXD6 450–600 140 39 175 691 147 40 182 62LD6 450–600 140 39 175 61 147 40 182 62MD6 400–800 140 79 175 114 147 80 182 115SelectionShipping Weights — PoundsFor Fusible Switch Bus Plugs Only3-Phase, 3-Wire3-Phase, 4-WireXL-XXL-XXL-U BD, LO-X XL-U BD, LO-XSwitch Prefix PrefixAmpere RV Prefix RV PrefixRating UV BOS UV BOS30,60 17 15 19 12100 17 18 19 18200 36 34 38 36400 165 111 160 112600 165 111 170 112Special Bus PlugsCatalog NumberDescription XL-U XL-X BD, LO-X List Price $Ground Detector and Potentializer–For 2 or 3-pole 240 and 480 Volt service. UPGR314G RPGR314G PGR6314 1137.00AccessoriesCatalog ListDescription Number Price $Channel Spacers–Must be used with Bus Plugs or Plug-inBranch-Run Adapters mounted on 600-, 800- or 1000-ampereABD Busway or on 800- or 1000-ampere BDP Busway.4 per package W37940 8.90“ON-OFF” Bus Plug Stickers –Pressure sensitive, per pair. W47185 6.20BD Bus Plug Catalog Number ReferenceABD4 BuswayCatalogNumberBDP4 Busway225 400 600 800 1000 1200 225 400 600 800 1000 1350ABD402 ABD404 ABD406 ABD408 ABD410 ABD412 BDP402 BDP404 BDP406 BDP408 BDP410 BDP413BJC44001 — — — — — — — — BJC44002 — — — — — — —BJC4400G1 — — — — — — — — BJC4400G2 — — — — — — —BFC46001 — — — — — — — — BFC46002 — — — — — — — — —BFC4600G1 — — — — — — — — BFC4600G2 — — — — — — — — —BMC48001 — — — — — — — — BMC48002 — — — — — — — — — —BMC4800G1 — — — — — — — — BMC4800G2 — — — — — — — — — —BOS164251 — — — — — — — — BOS164252 — — — — — — —BOS16425G1 — — — — — — — — BOS16425G2 — — — — — — —BOS164261 — — — — — — — — BOS164262 — — — — — — — — —BOS16426G1 — — — — — — — — BOS16426G2 — — — — — — — — —BOS164551 — — — — — — — — BOS164552 — — — — — — —BOS16455G1 — — — — — — — — BOS16455G2 — — — — — — —BOS164561 — — — — — — — — BOS164562 — — — — — — — — —BOS16456G1 — — — — — — — — BOS16456G2 — — — — — — — — —1600BDP41614-58Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule BPLU

Busway Power DistributionXL-X ® , XL-U ® , BD ® CubiclesCubicles Molded Case Circuit Breakers(For Use With All Types of Busway)List Price $ — With Breaker3-Phase, 4-WireBreaker Ampere 3-Phase 120/280V ACType Rating 600V AC 277/480V ACET Heavy DutyJD6 200–400 13433. 14093.MD6400–600 22939. 24092.700–800 23496. 24675.800 26867. 28135.1000 29097. 30543.PD6 1200 34129. 35840.1400 37488. 39364.1600 38045. 39947.RD6Current-LimitingCJD61800 43634. 45826.2000 44763. 46993.150–225 19947. 20948.250–400 22939. 24079.CLD6 450–600 38895. 40833.CMD6 400–800 39895. 41885.800 40884. 42937.1000 44877. 47120.CPD6 1200 51860. 54457.1400 53051. 55712.1600 53849. 56548.CRD6Note: Additional molded case circuit breakers not listed may be used.Consult local sales office for availability.1800 56447. 59273.2000 56840. 59692.Selection14 BUSWAYSYSTEMSFusible Switch — Vacu-Break ®3-Phase, 3-Wire3-Phase, 4-Wire250 600 120/208 277/480Volts AC Volts AC Volts AC Volts ACAmpere Catalog List Catalog List Catalog List Catalog ListRating Number Price $ Number Price $ Number Price $ Number Price $200 FC3022 8351.00 FC3025 9010.00 FC4022 9809.00 FC4025 10594.00400 FC3042 9593.00 FC3045 10367.00 FC4042 11280.00 FC4045 12179.00600 FC3062 11266.00 FC3065 12166.00 FC4062 13243.00 FC4065 14295.00800 — — FC3085 19200.00 — — FC4085 22558.001200 — — FC3125 23370.00 — — FC4125 27464.00Power Circuit BreakerAC Interrupting Capacity List Price $Breaker MaximumSymmetrical (RMS) AmperesWith BreakerFrame Ampere 3-Phase, 3-Phase,Size Rating 240 Volt 480 Volt 600 Volt 3-Wire 4-WireType RLRL-800 800 30,000 30,000 30,000 39541. 43495.RL-1600 1600 50,000 50,000 50,000 69210. 76130.RL-2000 2000 65,000 65,000 65,000 75534. 83086.RL-3200 3200 65,000 65,000 65,000 158190. 174007.RL-4000 4000 85,000 85,000 85,000 237286. 261011.Type RLF (Fused)RL-800 800 200,000 200,000 200,000 57347. 63075.RL-3200 3200 200,000 200,000 200,000 197731. 217502.RL-4000 4000 200,000 200,000 200,000 276827. 304506.Bolted Pressure SwitchesAmpere480 Volts AC 600 Volts ACRating 3-Pole 4-Pole 3-Pole 4-Pole800 28613. 29185. 30330. 30901.1200 32905. 33562. 34878. 35538.1600 35765. 36481. 37912. 38627.2000 42919. 43777. 45493. 46352.2500 51504. 52532. 54593. 55624.3000 65809. 67126. 69758. 71073.4000 94422. 96311. 100087. 101975.No fuses supplied with fusible cubicles. Cubicle pricing includes labor and material for:1. Single cubicle frame section complete with requiredbusway openings.2. Circuit breaker or fusible switch.3. Mounting of circuit breaker or fusible switch andline-side connections.Figure busway footage through cubicle to compensatefor load-size connections.For other options, consult local sales office. For electrically operated, specify control voltage.Discount Schedule BUSWSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-59

14BUSWAYSYSTEMSBusway Mobile Industrial PowerIndustrial Trol-E Duct ®2 and 3-Pole100/150 Amperes 600 Volt AC, 250 Volt DCStandard Duty TD310Ship.Catalog List WeightDescription Number Price $ (lbs.)Standard Straight Busway Sections2-pole, 10 foot TD210 1001.00 403-pole, 10 foot TD310 1128.00 40Drop-Out Sections2-pole, 10 foot TD210R 1204.00 452-pole, 10 foot — sectionalizing TD210RS 1432.00 453-pole, 10 foot TD310R 1357.00 453-pole, 10 foot — sectionalizing TD310RS 1614.00 45Busless Busway And Drop-Out Sections10 foot busway TD010 800.80 3610 foot drop-out TD010R 963.20 36Accessories (Complete Assemblies)Hanger — 2 and 3-pole TDH3 79.00 04Intermediate Hanger TRH31 43.00 01End Plate TRB23 53.00 00 3 ⁄4Feed-In Adapter — 2 and 3-pole TDF3 150.00 04Insulated Ramp Ends (pair) — 510.00 —Replacement PartsCover for standard hanger(contains 10 pieces) W43771 70.00 05Hanger with cover (see TDH3) — — 04Bus Connector (contains 12 pieces) W43101 132.00 00 1 ⁄2Feed-In Connector (top)(contains 2 pieces) W43100 53.00 01Feed-In Connector (side)(contains 4 pieces) W43099 130.00 01For inches / millimeters conversion, see Application DataSection. Busway rating is 100A continuous and 150A intermittent.Note: All busway sections, regardless of length, include:1 hanger, 1 hanger cover, 1 set of bus connectors.Recommended loads not to exceed 25 pounds.UL listed.(All dimensions in inches)Selection / DimensionsGeneralStraight Duct Sessions LessThan 10 FeetFor each straight busway section lessthan 10 feet long:1. Use base price of $228. list to coverspecial construction.2. Take list price of standard 10-footsection of type required and proratefor footage price, figuring fractions tothe next larger number of even feet,as shown below:Example:Required: 4 feet of 3-pole Trol-E-Duct,100/150 ampere type.Base price to cover specialconstruction . . . . . . . . . . . . . . . . .$228.Footage price ($112.00/foot) proratedfrom TD310 . . . . . . . . . . . . . . . . . .$448.List price for 4 feet of 3-pole extrafootage . . . . . . . . . . . . . . . . . . . . .$676.Special Curved Duct SectionsCurved busway sections should befigured on basis of $120. list per linearfoot, plus $2090. set-up andengineering charge for each curvedsection. Any change of directionconstitutes a curve and should bepriced as above.Exceptions:1. On a circle, 2 set-up charges willapply.2. When 2 or more identical curvesare required on a job, apply onlyone set-up charge to each groupof identical curves.To find the linear footage of specialcurves of any number of degreesand any radius, use the formulashown below:2R x 3.1416 x D =L360R = Radius in feetD = Degreesof curveL = Length of curveExample:Required: The length of a 75° curvewith a radius of 5 1 ⁄2 feet.2 x 5.5 x 3.1416 x 75 =7.199 feet360 (charge for 8 feet).Fractions are figured to the next largernumber of even feet, as price is alwaysbased on full linear feet.Flared EndsList price for each flared end on anystraight or curved busway section $476.Special feed-in (required for buswaysections with two flared ends) . . .$234.14-60Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule BUSW

Busway Mobile Industrial PowerIndustrial Trol-E Duct ® / Trolleys, Tool Hangers2 and 3-Pole Non-Fusible600V AC and 250V DCNumber Minimum Ship.Trolley of Maximum Radius Catalog List WeightType Poles Amperes (feet) Number Price $ (lbs.)Trolleys OnlyStandard 2 30 5 T131 399.00 4Standard 3 30 5 T331 406.00 4Curve 2 60 3 T134 716.00 5Curve 3 60 3 T334 805.00 5Heavy Duty 2 60 5 TR1311 478.00 4Heavy Duty 3 60 5 TR3311 530.00 4Roller 2 20 5 TR1312 364.00 4Roller 3 20 5 TR3312 406.00 4Transfer 2 30 2 T25 1241.00 7Transfer 3 30 2 T35 1308.00 7Button 2 60 5 T132 649.00 5Button 3 60 5 T332 659.00 5Trolleys Box Hangers Plain — — — TPTH 223.00 5Tool — — — TBTH 292.00 6Box Tool Hanger With SAF To Fuse Unit 30A 240V AC 250V DC TBTH302F 455.00 730A 600V AC TBTH306F 760.00 8Box Tool Hanger With Receptacle 20A 240V AC 250V DC TBTH202R 628.00 7Cleaning TrolleysAbrasive 3 — 5 ACT331 705.00 4Brush 3 — 5 BCT331 705.00 4Note: When trolleys are used with auxiliary equipment that has a lower rating, the ratingof the auxiliary device will govern the rating of the trolley. For example: heavy-dutytrolleys (maximum 60A) used with box tool hangers having SAFtoFUSE units arelimited by the fuse size to a rating of 30A. Also, trolleys used with box tool hangershaving receptacles are limited by the receptacles’ rating to a rating of 20A, 480V ACor 250V DC.Heavy Duty TrolleyTR331-1Transfer Type TrolleyT35Selection / DimensionsStandard TrolleyT331Roller Type TrolleyTR331-2Button Type TrolleyT33214 BUSWAYSYSTEMSPlain Tool HangerBox Tool Hanger For 90A heavy duty trolleys, 2 or 3-pole, add $102. to listprice above. Plain and box tool hangers are not designed for usewith curve or transfer type trolleys. They are forassembly only on standard, heavy-duty, roller or buttontrolleys.Discount Schedule BUSWSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 14-61

Busway Mobile Industrial PowerIndustrial Trol-E Duct ®4-Pole100/150 Amperes 480 Volt AC, 250 Volt DCSelection / Dimensions14BUSWAYSYSTEMSStandard Duty TD410Ship.Catalog List WeightDescription Number Price $ (lbs.)Standard Straight Busway Sections4-pole, 10 foot TD410 44Drop-Out Sections4-pole, 10 foot TD410R 494-pole, 10 foot — sectionalized TD410RS 49Busway Accessories (Complete Assemblies)Hanger — 4-pole TDH4 4 1 ⁄4Intermediate Hanger TRH31 1End Plate TRB23 3⁄4Feed-In Adapter — 4-pole TDF4 4 1 ⁄44-Pole TrolleyInsulated Ramp Ends (pair) — —30A 4-pole Button Trolley T431 4Replacement PartsCover for standard hanger(contains 10 pieces) W43771 5Hanger with cover (see TDH4) — 4Bus Connector (contains 12 pieces) W43101 1⁄2Feed-In Connector (top)(contains 2 pieces) W43100 1Feed-In Connector (side)(contains 4 pieces) W43099 1AVAILABILITY TO BE ANNOUNCED(All dimensions in inches)For inches / millimeters conversion, see Application DataSection. Busway rating is 100A continuous and 150A intermittent. See Electronic Pricing.Note: All busway sections, regardless of length, include:1 hanger, 1 hanger cover, 1 set of bus connectors.Recommended loads not to exceed 25 pounds.UL listed.14-62Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule BUSW

15SPEEDFAX TM 2007-2008 Motor Control CentersContentsTIASTAR Motor Control CenterProduct Overview 15-2 – 15-5Technical / Dimensions 15-6 – 15-10Motor Control Center Replacement UnitsAftermarket Overview 15-11 – 15-1415MOTOR CONTROLCENTERSResidential Commercial Industrial

15MOTOR CONTROLCENTERSTIASTAR Motor Control CenterOverview of TIASTARSiemens Energy & Automationintroduces the TIASTAR (tie-star) MotorControl Center to meet the growingneeds of our consumers. The TIASTARMCC enhancements have been createdfrom listening to our customers andoffering a wider selection of options.Providing the best of Siemens’ provenmotor control centers (MCCs), System89 and Model 95+, TIASTAR is designedto be the industry’s leading value.From its sturdy metal cabinet to thebest-of-breed Siemens technologywithin, TIASTAR has no equal. Siemens’TIASTAR MCC with PROFIBUS-DPcommunications combines heavy-dutyindustrial construction and user friendlyfeatures to deliver detailed diagnosticsand control by communicating betweenMCC units and a PLC or DCS. Unlikeother manufacturers’ network offerings,Siemens’ offering is non-proprietary andis designed to simplify, not complicate,your life. So whatever you need, youcan rest assured that your TIASTARMCC can meet your needs.While we think Siemens’ TIASTAR MCCis a wise investment, it is important foryou to know that advanced capabilitiescan be added any time during the life ofthe product. Siemens doesn’t think youshould pay for pre-wiring or designfeatures that don’t have an immediatepayback.TIASTAR Motor Control CenterGeneral Features and BenefitsThe most effective means for groupinglow voltage motor starters, associatedcontrol and distribution equipment isthrough the use of motor control centers.Siemens MCCs allow grouping thisequipment in a common sheet steelenclosure. All 36" motor starter units(through NEMA Size 5 for FVNR) andall feeder disconnects through 250amperes can be mounted withdrawout construction.All devices within the MCC are poweredfrom a common horizontal bus andthree phase vertical bus located in eachsection. Once installed in its centralizedoperating plant location, manualsupervision and monitoring can beperformed safely, and remotesupervision can be provided throughthe Siemens ACCESS datacommunication system.Domestic Design StandardsThe following are the principal domesticstandards which apply to motor controlcenter design, testing, construction andapplication. The TIASTAR Motor ControlCenter complies fully with the latestversion of all these standards.NEMAAB-1 Molded Case Circuit BreakersICS 1 General Standards for IndustrialControlICS 2 Standard for Industrial ControlDevices, Controllers and AssembliesICS 18 Standard for Motor ControlCentersUL845 Motor Control Centers508 Industrial Control Equipment891 Switchboard Design94 Test for Flammability of PlasticMaterials for Parts, Devices, andAppliances489 Molded Case Circuit Breakers andCircuit Breaker Enclosures991 Tests for Safety-related ControlsEmploying Solid-state DevicesNFPA – National Fire ProtectionAssociation70 National Electrical CodeIEEEIEEE-STD-693-1997, IEEERecommended Design Practice forSeismic Design of SubstationsProduct OverviewConstruction DetailsSiemens TIASTAR Motor Control Centersare composed of a number of verticalsections bolted together. That allowsfor future addition of MCC vertical unitsso the equipment can expand withcustomer needs. The standards structureis 90 in. (2286 mm) high, plus a 1.125 in.(29 mm) high channel sill. Front-onlystructures can be either 15 in. (381 mm)or 20 in. (508 mm) deep. Back-to-backmounted structures are 30 in. (762 mm)or 40 in. (1016 mm) deep, and consist oftwo horizontal and vertical buses. Thisallows for correct bus phasing on thefront or rear. Siemens provides a 21 in.back-to-back design, consisting of acommon horizontal and vertical busstructure, for applications whereavailable footprint is limited.UL Listed StartersSiemens offers a wide range of ULListing for the industry – from NEMASize 0 through 6, including reducedvoltage, two-speed, wye-delta andpart-winding type starters.Drives and Soft StartsSiemens VFD (variable frequency drives)and RVSS (reduce voltage solid statestarters) are available in our MCC.The range for VFD is fractional hp to300 hp-VT and 1hp to 600 hp for RVSS.These applications are designed to meetthe robust industrial environment and arecost effective for today’s market.Power MonitoringSiemens line of power meters providesmarket leading technology for powerquality measurement. These productscontinually change to meet growingneeds for power quality and energymonitoring. Siemens TIASTAR MCCsare fully capable of installing any ofSiemens power meters for your needs.Please review the full line of Siemenspower meters at www.sea.siemens.com.Overload ProtectionSiemens understands customer needsvary from motor to motor. That is whywe offer 4 lines of overload protection.For basic needs you can specify bi-metalambient compensated overloads. Ifsingle phase is a concern our customerscan specify ESP100, and for the mostadvanced motor protection, customerscan consider SIMOCODE overloads thatprovide detailed information and control.15-2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

TIASTAR Motor Control CenterESP100 Solid State OverloadsESP100 solid state overload relays areself powered, requiring no separate120V source to power the circuit board.They provide phase loss protection,fewer connection points and high repeattrip accuracy which results in longermotor life and cost savings. NEMAClass 10, 20 and 30 trip curves areavailable for a variety of applications.The ESP100 solid state overloadprovides phase loss protection for themotor by tripping within three secondsupon complete loss of one phase of athree phase motor branch circuit.Each overload has at least a 2:1 currentadjustment range with the adjustmentdial reading out in full load amps. Inaddition to the markings on the dialthere are audible clicks which allowfor extremely fine tuning.The heaterless construction of theseoverloads minimizes energy costs andthe costs of cabinet ventilation orcooling. Solid state overloads can beused at temperatures from –30°C to70°C and are rated for 50Hz and 60Hzapplications.ESP100 panel mounted overloads can beused to upgrade existing starterapplications where panel mountedthermal overloads are used. In addition,ESP100 overloads can be panel mountedwhen used with other types ofcontrollers, such as DP, IEC contactors,and soft starts.ESP100 overloads can be used on highvoltage applications, making them idealfor use with vacuum contactors andother high voltage control.ESP100 overloads can be retrofittedon existing contactors using the retrofitplate suffixes or on other brands usingthe plates listed in the competitiveretrofit plates table on page 16-48.SIMOCODE ProSIMOCODE Pro is the latest generationof Motor Management System(“Smart Overload”) bringing a new levelof flexibility and functionality within theSiemens smart motor control center.By means of a PROFIBUS DP interface,it can easily be linked to higher-levelautomation systems. SIMOCODE Proimplements all motor protection andcontrol functions, determines operational,diagnostic and statistical data andorganizes the communication betweenthe automation system and MCC bucket.The SIMOCODE Pro consists of twodevice series with different levels offunctionality:SIMOCODE Pro C (Compact)The compact motor management systemcan be used for Full Voltage Nonreversing(FVNR) starters, Full VoltageReversing (FVR) starters, and baseoverload functionality.CT ModuleSIMOCODE Pro V (Variable)The variable motor management systemhas an even greater range of functions,including voltage and power monitoringand expandable modules for additionalI/O, as well as temperature and groundfault protection.CT ModuleKeypad(Door Mounted)SIMOCODE Pro CSIMOCODE Pro VProduct OverviewThermal OverloadsBimetal Ambient CompensatedBimetal ambient compensated overloadrelays protect both the motor andequipment by opening the control circuitwhen the motor experiences an overloadcondition. The bimetal overload relay maybe set for either manual or automaticreset and can be supplied with standardClass 20 heater elements or optionalClass 10 heater elements as required.An ambient compensated model of thebimetal overload is available.Bimetal Ambient Compensated Overload15MOTOR CONTROLCENTERSExpandable ModuleKeypad(Door Mounted)Note: For detailed information on the SIMODE Pro pleasecontact the local Siemens Sales Office.ESP100 Solid State OverloadSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 15-3

Motor Control CentersQuality Features Exceed StandardsProduct OverviewMOTOR CONTROLCENTERS1515-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Motor Control CentersProduct OverviewFor ease in wiring and inspection,terminal blocks are mounted on aswing-out side barrier.The horizontal bus compartment isisolated from the horizontal wirewaysby a crystal clear polycarbonatebarrier that makes visible andinfrared maintenance inspectiona breeze. The barrier is easilyremoved when access to thehorizontal bus is required.A racking lever on all plug-in unitsensures that they are fully engagedwith the vertical bus. An interlockwith the disconnect device ensuresthat a plug-in unit is not inserted orremoved from the vertical bus whenthe unit is energized.Horizontal bus design keeps the busin the top 12" of the structure, neverbehind units, for easy maintenanceand accessibility.A positive stop in the “TEST”position indicates that a plug-inunit is fully withdrawn from thevertical bus.Copper bus and heavy-duty insulators safely distributepower to sections. Copper bus, standard throughout, isconservatively rated at 50-degree rise and provides up toan optional 100,000A withstand capacity.Pilot devices are mounted on a sturdyformed-metal panel attached withtwo captive screws to the MCC unitdoor for easy access to internalcomponents. For unit removal andtest, the pilot device panel is easilyremoved from the door and mountdon the unit.A copper clip on plug-in unitsengages and grounds units atall times.The unit disconnect operating handlefeatures a simple, rugged design.“ON” and “OFF” are clearly indicatedby position, color and word. The“TRIP” indication is clearly displayedon circuit breaker equipped units.15MOTOR CONTROLCENTERSA positive stop mechanism preventsthe unit from falling out of thestructure during unit removal.Important Additional Features: All wiring and components meet or exceed therequirements of UL, CSA, ENEMA, EEMAC, andNEC Pre-wired components are professionally harnessedto industrial terminal blocks Full depth wire tie rods are standard in each verticalwireway White interior increases visibility for easy wiring,maintenance and inspection Modular units are fully interchangeable Each TIASTAR MCC is designed to satisfy your mostexacting specifications White on black base operating handle is easy toidentifyA screwdriver operated defeatermechanism allows access toan energized unit byauthorized personnel.All doors swing open a minimumof 110° for easy unit accessand removal.Plug-in unit stab assemblies includeself-aligning stab clips with springsteel backup springs. Wires from thestab clips to the line-side of the circuitbreaker or disconnect switch arecontained in the stab housing and areisolated phase-to-phase until thewires enter the MCC.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 15-5

15MOTOR CONTROLCENTERSTIASTAR Motor Control CentersDimensionsHeight:91.125 in. (2318 mm)(Front Mounted Only Structure)Width:20 in. (508 mm)24 in. (610 mm)30 in. (762 mm)Depth: Standard: 15 in. (381 mm)Optional: 20 in. (508 mm)Optional:* 31 or 41 in.(762 or 1016 mm)*(Front mtd. only structures mtd.Back-to-Back)(Back-to-Back structure)Width:Depth:20 in. (508 mm)30 in. (762 mm)21 in. (533 mm)Vertical Wireway Height:72 in. (1829 mm)Width:4 in. (127 mm)Depth:10 in. (203 mm)Cross Section: 38.25 square in.(972 square mm)Top Horizontal WirewayFront Mounted Only andBack-to-Back MountedHeight:12 in. (305 mm)Depth:7 in. (178 mm)Bottom Horizontal WirewayFront Mounted OnlyHeight:Depth:6 in. (152 mm)15 in. (381 mm)20 in. (508 mm)or Back-to-Back MountedHeight:6 in. (152 mm)Depth:30 or 40 in.(762 or 1016 mm)Structural Gauge ChartStructural PartsDivider Sheets . . . . . . . . . . . . . . . . . . . . . . . . .14 ga.Side Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . .14 ga.Center Bottom Cross Ties . . . . . . . . . . . . . . . .12 ga.Rear-Channel(Front Mounting only) . . . . . . . . . . . . . . .13 ga.Channel Sills . . . . . . . . . . . . . . . . . . . . . . . . . . .7 ga.Center-Top Channel . . . . . . . . . . . . . . . . . . . . .13 ga.Vertical Bus Mounting Angles . . . . . . . . . . . . .14 ga.Lifting Angles . . . . . . . . . . . . . . . . . . . . . . . . . .7 ga.Rear Covers . . . . . . . . . . . . . . . . . . . . . . . . . . .16 ga.Top Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 ga.End Covers . . . . . . . . . . . . . . . . . . . . . . . . . . .16 ga.Separator Angles . . . . . . . . . . . . . . . . . . . . . . .12 ga.Shelf Brackets . . . . . . . . . . . . . . . . . . . . . . . . .10 ga.Unit PartsTop and Bottom Unit Barriers . . . . . . . . . . . . .14 ga.Back Pan . . . . . . . . . . . . . . . . . . . . . . . . . .13, 14 ga.Side Barrier Plate . . . . . . . . . . . . . . . . . . . . . . .18 ga.Angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 ga.Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13, 14 ga.Finish (Ext.) ANSI 61 Light GrayElectrostatically applied dry powder paintis standard.PlatingAll power bus, copper tin-plated as std.Silver plating available by request.Horizontal BusAmpere RatingsStandard:Optional:600A, tin-plated Cu800A, Cu1200A, Cu1600A, Cu2000A, Cu2500A, CuVertical BusAmpere RatingsStandard:300A, tin-platedOptional:600A, CuNeutral Bus (Bottom Mounted)Optional:Full neutral CuOptional: Neutral landing padRatings:600A to 1600ABus BracingStandard:Optional:42,000A,65,000A, and100,000A Sym.Incoming Line TerminationsIncoming line arrangements areavailable in many configurationsfrom 600A to 2500A.BarriersStandard:Isolation Barrier:Standard:Optional:Grounded sheetsteel with stabopenings.Inserts to cover unusedopenings in V-bus barrier.Automatic shuttermechanism.Ground Bus (Bottom Mounted)Required for UL labelingStandard: .25 in. x 1 in. unplated Cu.Optional ground bus available up to1200A.Vertical ground bus available asoption, rating 300A.Also available with motor groundterminations.Weight TableDimensionsShippinginches (mm)Weightper SectionH W D Type in lbs. (kg)20 15550 lbs. (250)(508) (381)front only20 20600 lbs. (273)(508) (508)91.13 20 30(2315) (508) (762)back-to-back 850 lbs. (386)30 20(762) (508)front only 800 lbs. (364)20 21(508) (533)back-to-back 900 lbs. (409)Technical / DimensionsWiring SpecificationsControl on Units16 gauge19 strand bonded copper105°C – 600VInterconnection Control WiringBetween Units14 gauge19 strand copper105°C – 600VPower Wiring – Sized to suitmaximum HP rating of unit12 gauge to 2 gauge19 strand copper105°C – 600V1 gauge to 500 MCM19 strand to 37 strand copper105°C – 600VEnclosure TypesNEMA 1 (Standard) – IndoorNEMA 1A Gasketed – IndoorNEMA 2 – Drip-proof – IndoorNEMA 12 – Dust tight – IndoorNEMA 3R – Rainproof – Outdoor(Non-walk-in)MCC Shutter MechanismAutomatic shutter mechanisms whenspecified will be supplied at the stabin location of each plug-in unit andrequested future space. Unused stabopenings will be covered with snap-inhole plugs.Pull Box (Top Hat)Available in 12 in., 18 in. or 24 in. high;20 in. or 30 in. wide; 15 in. or 20 in. deep.15-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Motor Control CentersWiring ClassificationsSiemens MCC’s are available as eitherClass I or Class II assemblies utilizing eitherType A, Type B, or Type C wiring as definedin NEMA ICS18-2001(3.1) and NEMAICS18-2001(3.3). Below are the NEMAclass and type definitions:Class I — Independent Units (NEMAICS18-2001(3.2.1))Class I motor control centers shall consistof mechanical groupings of combinationmotor control units, feeder tap units, otherunits, and electrical devices arranged in aconvenient assembly. The manufacturershall furnish drawings that include:a. Overall dimensions of the motor controlcenter, identification of units and theirlocation in the motor control center,locations of incoming line terminals,mounting dimensions, available conduitentrance areas, and the location of themaster terminal board if required (Type Cwiring only).b. Manufacturer’s standard diagrams forindividual units and master terminal boards(Type C wiring only) consist of one or moredrawing(s) that:1. Identify electrical devices.2. Indicate electrical connections.3. Indicate terminal numberingdesignations.Note: When a combination schematic and /or wiring diagram for a unit is suppliedshowing optional devices, the manufacturershall provide information to indicate whichdevices are actually furnished.Class II — Interconnected Units (NEMAICS18-2001(3.2.2))Class II motor control centers shall be thesame as Class I motor control centers withthe addition of manufacturer furnishedelectrical interlocking and wiring betweenunits as specified in overall control systemdiagrams supplied by the purchaser. Inaddition to the drawings furnished for ClassI motor control centers, the manufacturershall furnish drawings that indicate factoryinterconnections within the motor controlcenter.Class I-S and II-S — Motor ControlCenters With Custom DrawingRequirements (NEMA ICS18-2001(3.2.3))Class I-S and II-S motor control centersshall be the same as Class I and II exceptcustom drawings shall be provided in lieuof standard drawings as specified by theuser. Examples of custom drawings are:▪ Special identifications for electricaldevices▪ Special terminal numbering designations▪ Special sizes of drawingsThe drawings supplied by the manufacturershall convey the same information asdrawings provided with Class I and II motorcontrol centers, additionally modified asspecified by the user.Types of Wiring — NEMA ICS18-2001(3.3.1)Type A (NEMA ICS18-2001 (3.3.1.1))User field wiring shall connect directly todevice terminals internal to the unit andshall be provided only on Class I motorcontrol centers.Technical / DimensionsType B (NEMA ICS18-2001(3.3.1.2))a. Type B user field load wiring forcombination motor control units size 3 orsmaller shall be designated as B-D or B-T,according to the following:▪ B-D connects directly to the deviceterminals, which are located immediatelyadjacent and readily accessible to thevertical wireway.▪ B-T connects directly to a load terminalblock in, or adjacent to, the unit.b. Type B user field load wiring forcombination motor control units larger thansize 3, and for feeder tap units, shallconnect directly to unit device terminals.c. Type B user field control wiring shallconnect directly to unit terminal block(s)located in, or adjacent to, each combinationmotor control unit.Type C (NEMA ICS18-2001(3.3.1.3))User field control wiring shall connectdirectly to master terminal blocks mountedat the top or bottom of those verticalsections that contain combination motorcontrol units or control assemblies whichshall be factory wired to their masterterminal blocks. User field load wiring forcombination motor control units, size 3 orsmaller, shall connect directly to masterterminal blocks mounted at the top orbottom of vertical sections. Motor controlunit load wiring shall be factory wired to themaster terminal blocks. User field loadwiring for combination motor control unitslarger than size 3, and for feeder tap units,shall connect directly to unit deviceterminals.15MOTOR CONTROLCENTERSIAIB-TIIBIICIB-DICSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 15-7

Motor Control CentersStarter Ratings and DimensionsMCC Starter Ratings and DimensionsNEMASizeMaximumHorsepower Rating208 V 230 V 460 VCircuit Breaker Type (For Maximum HP at 460V) Fusible Type (For Maximum HP at 460V)StandardBreakerTypeDimensions in Inches (mm)Unit Height W = Width, D = DepthkAInterruptingRatingat 480 V StandardDisconnectSw/FuseClip SizesTechnical / DimensionsDimensions in Inches (mm)Unit Height W = Width, D = DepthkAInterruptingRatingat 480 V 15MOTOR CONTROLCENTERSFull Voltage — UL Listed — FVNR FVR IR Std./Opt. —FVNR FVR IR0-1 7.5 7.5 10 12 (305) 18 (457)30 / 30 12 (305)18 (457)2 10 15 25 MCP 12 (305) 24 (610)60 / 60 12 (305)24 (610)42 / 1003 25 30 5018 (457) 30 (762)100 / 100 24 (610)36 (914)4 40 50 100 FD6-ETI 24 (610)36 (914)FD6MCS / 200 42 (1067) 48 (1219) 5 75 100 200 JD6-ETI 36 (914) 72 (1829) 42 / 100 JD6MCS / 400 72 (1829) 72 (1829) 30W (762W) 1006 150 200 400 LD6-ETI 48 (1219)72 (1829)MD6MCS / 600 72 (1829)72 (1829)30W (762W)30W (762W)42 / 10072 (1829)72 (1829)7 — 300 600 ND6 30W × 20DN/A ND6MCS / 1200 40W × 20DN/A(762W × 508D)(1016W × 508D)Two Speed, ConstantOr Variable Torque — UL Listed — 2S2W 2S1W IR Std./Opt. —2S2W 2SW1 IR0-1 7.5 7.5 10 24 (610) 24 (610)30 / 30 24 (610)24 (610)2 10 15 25 MCP 24 (610) 24 (610)60 / 60 24 (610)24 (610)42 / 1003 25 30 5030 (762) 36 (914)100 / 100 36 (914)48 (1219)4 40 50 100 FD6-ETI 36 (914)48 (1219)FD6MCS / 200 48 (1219) 60 (1524) 1005 75 100 200 JD6-ETI72 (1829)72 (1829)72 (1829) 72 (1829)42 / 100 JD6MCS / 40030W (762W) 30W (762W)30W (762W) 30W (762W)6 150 200 400 LD6-ETI72 (1829)ConsultConsult30W (762W) Siemens42 / 100 MD6MCS / 60072 (1829)40W (1016W) Siemens2S2W-CH 2S1W-CH IR Std./Opt.RVAT IR Std./Opt.Two Speed, ConstantHorsepower — UL Listed— —2S2W-CH 2SW1-CH IRStar Connected — UL Listed — RVPWIR Std./Opt. —RVPW IR0-1 7.5 7.5 10 24 (610) 24 (610)30 / 30 24 (610)24 (610)2 10 15 25 MCP 24 (610) 24 (610)60 / 60 24 (610)24 (610)42 / 1003 25 30 5030 (762) 36 (914)100 / 100 36 (914)48 (1219)4 40 50 100 FD6-ETI 30 (762)48 (1219)FD6MCS / 200 48 (1219)60 (1524) 1005 42 / 10075 100 200 JD6-ETI 72 (1829)72 (1829)JD6MCS / 400 72 (1829)72 (1829)30W (762W) 30W (762W)30W (762W)6 150 200 400 LD6-ETI72 (1829)Consult42 / 100MD6MCS / 60072 (1829)Consult30W (762W) Siemens40W (1016W) SiemensReduced Voltage AutotransformerNon-Reversing, Closed Transition— UL Listed— —RVAT IR2 10 15 25 42 (1067)60 / 60 42 (1067)MCP3 25 30 5042 (1067)42 / 100100 / 100 48 (1219)4 40 50 100 FD6-ETI 48 (1219)FD6MCS / 200 60 (1524)5 75 100 200 JD6-ETI 72 (1829), 30W (762W)42 / 100JD6MCS / 400 72 (1829), 30W (762W)6 150 200 400 LD6-ETI10072 (1829)30W (762W)MD6MCS / 80072 (1829)30W (762W)42 / 1007 300 300 600 ND672 (1829)50W × 20DND6MCS / 120072 (1829)50W × 20D(1270W × 508D)(1270W × 508D)Two Step Part Winding,1 10 10 1560 / 60 24 (610)24 (610)2 20 25 40 MCP100 / 100 24 (610)42 / 1003 40 50 7536 (914)FD6MCS / 200 48 (1219)4 75 75 150 JD6-ETI 36 (914)JD6MCS / 400 72 (1829) 1005 125 150 350 LD6-ETI 72 (1829)42 / 10072 (1829)LD6MCS / 60030W (762W)6 — 250 500 MD6 72 (1829)30W (762W)42 / 100 MD6MCS / 60072 (1829)30W (762W) The addition of oversize CPT’s (above 50VA), relays, timers, etc. may increase unit height. Consult Siemens for other voltages. Interrupting ratings are 25 kAIC when not UL Listed. Stationary units (not plug-in). Fixed mounted unit – space behind not available. Based on each winding handling 50%. Consult Siemens for other ratings.Note: For Half Size Starters, contact Siemens.15-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Motor Control CentersStarter Ratings and DimensionsMCC Starter Ratings and Dimensions (cont'd)NEMASizeMaximumHorsepower Rating208 V 230 V 460 VTechnical / DimensionsReduced Voltage Wye Delta,Open and Closed Transition — YDO YDC IR Std./Opt. —YDOYDCIR2 20 25 40 MCP 30 (762) 42 (1067) 42 / 100100 / 100 36 (914)4 60 60 125 FD6-ETI 36 (914) 48 (1219) 42 / 100400MCS / 400 72 (1829) 72 (1829) 1003 25 30 60 MCP 30 (762) 42 (1067) 42 / 100250MCS / 200 48 (1219) 60 (1524)5 150 150 300 LD6-ETI72 (1829) 72 (1829) 72 (1829)30W (762W) 30W (762W) 42 / 100600MCS-60030W (508W) 30W (508W)Solid State Reduced VoltgageOpen and Closed Transition — IR Std./Opt. — IR1 7.5 7.5 10 CED6-ETI 18 (457) (30 / 30) 18 (457) 3 25 30 50 CED6-ETI 36 (914) (ED36 (914)MCS / 100)2 10 15 25 CED6-ETI 36 (914) (60 / 60) 36 (914) 4 40 50 100 CFD6-ETI(ED36 (914)42 / 100MCS / 100)60 (1524)1005 75 100 200 CJD6-ETI 48 (1219) (EDMCS / 100)60 (1524) 6 150150350Circuit Breaker Type (For Maximum HP at 460V) Fusible Type (For Maximum HP at 460V)StandardBreakerTypeCLD6-ETIDimensions in Inches (mm)Unit Height W = Width, D = DepthkAInterruptingRatingat 480 V StandardDisconnectSw / FuseClip Sizes(EDMCS / 100)72 (1829) 72 (1829) Dimensions in Inches (mm)Unit Height W = Width, D = Depth72 (1829) kAInterruptingRatingat 480 V Compact Units — AvailableCircuit—FVNR Only — UL ListedBreaker Type Fusible Type IR Std./Opt.0-1 7.5 7.5 10 MCP 6 (152) 6 (152) 42 / 100 The 2 addition 10 of oversize 15 CPT’s (above 25 50VA), ED6-ETI relays, timers, 12 (305) etc. may increase 18 unit (457) height. Number Consult 3 Siemens 25 for 30 other voltages. 50 ED6-ETI 15 (381) 30 (762) Amp Of Stationary units — Not plug in.Rating Circuits4 40 50 100 FD6 21 (533) 30 (762) Requires 30 in. (762 mm) wide structure. Bypass and / or isolation requires additional space. 15 HP at 230V requires additional unit space. Consult Siemens. The addition of relays, timers, etc. will require additional space. Unit includes rated line side isolation starter and J fuses.480V Variable Frequency Drives — NEMA 1A MCC Enclosures Dimensions—In. (mm) RatingHP 2DriveTypeMM440RatedAmperes4MountingHeight18 (457) (Plug-in)MM440 8.55MM440 7.624 (610)(Plug-in)7.5 MM440 11MM440 1410MM440 19MM440 2336 (914)15(Plug-in)MM440 2520 MM440 3225MM440MM440343448 (1219)30MM440 45(Plug-in)MM440 4640 MM440 5260 (1524)50MM440 75(Recessed Panel,60MM440 240 Max. Fixed Mounted)75-125 MM440 185 Max. 72 (1829)150-300 MM440 370 Max. (Recessed Panel, Fixed-Mounted)StructureW × D20 (508) × 15 (381)20 (508) × 20 (508)50 (1270) × 20 (508) For other available voltage ratings, consult Siemens. For other enclosure types, consult Siemens. Ratings are for variable torque applications. Consult Siemens for other applications. Dimensions shown are for circuit breaker or fusible disconnects. Drives with bypass and / or isolation require extra mounting space. Consult Siemens for further information.Lighting PanelboardsApplied in MCC’sHeight In Inches (mm)1Ø, 3W 3Ø, 4W240/120 208Y/1203Ø, 4W277/480PanelMain Lug Only18 1 to 18 30 (762) 30 (762) 30 (762)225 30 1 to 30 36 (914) 36 (914) 36 (914)42 1 to 42 42 (1067) 42 (1067) 42 (1067)Main Breaker225 18 1 to 18 30 (762) 30 (762) 30 (762)25030 1 to 30 36 (914) 36 (914) 36 (914)42 1 to 42 42 (1067) 42 (1067) 42 (1067)Distribution TransformerskVARating11.5PhaseUnit HeightIn Inches (mm)Plate-Mounted in12 in. (305 mm) space2357.5 110 18 (457) 15253024 (610) 37.5 24 (610) 9152530453 12 (305)18 (457)24 (610) Transformer mounted on brackets 6 in. (152 mm) off sills. Requires 20 in. (508 mm) deep structure.15MOTOR CONTROLCENTERSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 15-9

Motor Control CentersIncoming Cable Space, Wiring Troughs, Wiring TerminationsThe National Electrical Code establishesvery specific guidelines for minimumcable bending space within motor controlcenters. Figures 1 through 5 belowdescribe the most commonarrangements for terminating mainincoming power cables in the MCC.Consult Siemens for incoming linecompartment braced for 100,000amperes symmetrical, short circuit.Incoming Cable SpaceDescription ofTop or BottomIncoming ServiceIncoming Section≤ 350 kcmilTwo per Phase≤ 600 kcmil One orTwo per Phase≤ 600 kcmil Three orFour per Phase750 kcmil One orTwo per Phase350 kcmil One orTwo per Phase≤ 600 kcmil One orTwo per Phase≤ 750 kcmil, up to eight per phase≤ 500 kcmil One or Two per Phase≤ 750 kcmil One per Phase toMain Breaker≤ 500 kcmil One toFour per Phase≤ 750 kcmil One per Phase toMain BreakerBusway or Cable Feedto Line ReactorTop — Directlyon Main BusTopTopTopBottomBottomTop or BottomTopTopTop or BottomCable EntryTop or BottomEitherEitherTopTopBottomBottomEitherBottomTopEitherTechnical / DimensionsSpace Requirementsin Inches (mm) NotesNone See Figure 3Top Wireway plus12.0 (305) orSee Figure 118.0 (457)Top Wireway plus18.0 (457)Top Wireway plus24.0 (607)Bottom Wireway plus18.0 (457)Bottom Wireway plus24.0 (610)Full StructureSeeBreaker / DisconnectSeeBreaker / DisconnectConsult SiemensSee Figure 1—600 A MaximumSee Figure 2600 A MaximumSee Figure 2Consult SiemensSee Figure 4See Figure 5Consult Siemens15MOTOR CONTROLCENTERSSiemens MCC’s are equipped with a 12 in. (305 mm) high, full-width horizontal wireway in the top and 6 in. (152 mm) in the bottomof each structure. A separate vertical wireway connects the top and bottom wiring areas in each vertical section. This wireway is 4in. (102 mm) wide by 10 in. (254 mm) deep, or 38.25 (972) square inches (mm).Note: All standard Siemens termination schemes shown herein do comply with applicable cable bending requirements of UL and the NEC.Figure 1MainLugsIncoming CableFigure 2Figure 3IncomingCableMainLugsMain Lugs at Top with Top Cable EntryCan accommodate up to two 600 kcmil cablesper phase when using Siemens standardmechanical lugs. A total height of 24 in. (610mm). This includes 12 in. (305 mm) for the topwireway plus 12 in. (305mm) of unit space.Compression lugs require extra vertical spaceor the addition of a top hat.Main Lugs at Bottom with Bottom CableEntryLugs are bolted directly to the bottom of thevertical bus. Can accommodate up to two 350kcmil per phase in 24 in. (610 mm) highcompartment. This includes 6 in. (152 mm) forthe bottom wireway plus 18 in. (457 mm) of unitspace. Can accommodate up to two 600 kcmilper phase in 30 in. (762 mm) high compartment.This includes 6 in. (152 mm) for the bottomwireway plus 24 in. (610 mm) of unit space.Main Lugs at Top with Top or BottomCable EntryIn this arrangement the lugs mount directlyon the horizontal bus, eliminating the need touse unit mounting space. The limitation hereis 350 kcmil cable per phase.Figure 4Figure 5Main Disconnect with Bottom Cable EntryMain Disconnect with Top Cable EntryIf bottom entry is used, cables must be properly laced and supported based upon the available short circuitcurrent. See dimensional requirements for molded case breakers and fused switches, consult local sales office.15-10Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Motor Control Center Replacement UnitsAftermarket OverviewProduct Description (Time Line: 2002 — Current)Introduced in 2002, Siemens TIASTAR is an advancedSISystem (Smart Integrated Solution System) that providesyou with seamless control of your physical plant by fusing ASI,PROFIBUS®, and ACCESS – as well as most legacysystems – into a robust, fully integrated management system.Units widths are normally 15" or 20" wide, and 12" tall with 6"increments. Today, we provide you with Siemens breakersand starters. The standard lead-time for delivery is 24 hrs –3 weeks.Model 95+Replacement CapabilitiesStarter UnitsReplacement starter units are available for all plug-in and Nonplug-in units MCC designs. A complete unit for adding to anexisting MCC includes a unit door, divider pans and allnecessary mounting hardware. Features of the replacementunits include:▪ Siemens Starter Size 1-6▪ CT, CPT, PT & Pilot Devices▪ CB and Fusible▪ Relays, Fuses, VFDand Softstarts▪ Soft Starts, SIMOCODE,ASI, PROFIBUS▪ UL LabeledProduct Description (Time Line: 1996 — 2001)The Model 95+ retrofit buckets are designed to fit into Model95+ MCCs. This upgrade from Model 95 included changes inhandles, color, pilot devices, and stabs. Unit widths arenormally 15" or 20" wide, and 12" tall with 6" increments.15MOTOR CONTROLCENTERSToday, we provide you with Siemens breakers and starters.The standard lead-time for delivery is 24 hrs – 3 weeks.Replacement CapabilitiesStarter UnitsReplacement starters are available for all plug-in and Nonplug-in units. A complete unit for adding to an existing MCCincludes a unit door, divider pans and all necessary mountinghardware. Features of the replacement units include:▪ Siemens Starter Size 1-6▪ CT, CPT, PT▪ CB and Fusible▪ Pilot Devices, VFD, Softstartsand ASI▪ Relays, Fuses▪ UL LabeledSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 15-11

Motor Control Center Replacement UnitsModel 95Aftermarket OverviewProduct Description (Time Line: 1995 — 1997)The Model 95 was originally manufactured in Raleigh, NC.Model 95 served as a style template for many old MCCbuckets since installation procedures and dimensions stayedthe same. Unit widths are normally 15" or 20" wide, and 12"tall with 6" increments.The original Model came with a variety of CB and startersfrom ITE, C-H and Siemens 3TF & 3UA Overload. Today, weprovide you with Siemens breakers and starters. The standardlead-time for delivery is 24 hrs – 3 weeks.15MOTOR CONTROLCENTERSModel 90Replacement CapabilitiesStarter UnitsReplacement starters are available for all plug-in and Nonplug-in units. A complete unit for adding to an existing MCCincludes a unit door, divider pans and all necessary mountinghardware. Features of the replacement units include:▪ Siemens Starter Size 1-6▪ CT, CPT, PT▪ CB and fusible▪ Pilot Devices▪ Relays and FusesProduct Description (Time Line: 1986 — 1997)The Model 90 retrofit buckets are designed to fit into Model90 MCCs. Unit widths are normally 15" or 20" wide, and 12"tall with 6" increments.The original Model came with a variety of CB and startersfrom ITE, C-H, and Siemens 3TF & 3UA Overload. Today, weprovide you with Siemens breakers and starters. The standardlead-time for delivery is 24 hrs – 3 weeks.Replacement CapabilitiesStarter UnitsReplacement starters are available for all plug-in and Nonplug-in units. A complete unit for adding to an existing MCCincludes a unit door, divider pans and all necessary mountinghardware. Features of the replacement units include:▪ Siemens Starter Size 1-6▪ CT, CPT, PT▪ CB and Fusible▪ Pilot Devices▪ Relays and Fuses15-12Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Motor Control Center Replacement UnitsAftermarket OverviewProduct Description (Time Line: 1979 — 2001)This is an upgrade from Class 89 developed by Furnas in1965. Bucket structures are normally 15" or 20" wide, and 12"tall with 6" increments.The original System 89 came with a variety of CB andstarters from Westinghouse, GE and Furnas Electric. Today,we provide you with Siemens breakers and starters. Thestandard lead-time for delivery is 24 hrs – 3 weeks.Replacement Capabilities MCC Plant: West ChicagoStarter UnitsReplacement starter units are available for all plug-in and nonplug-in unit MCC designs. A complete unit for adding to anexisting MCC includes a unit door, divider pans and allnecessary mounting hardware. Features of the replacementunits include:▪ Siemens Starter Size 1-6▪ CT, CPT, PT▪ CB and Fusible▪ Pilot Devices▪ Relay, Fuses, VFDand Softstarts▪ UL LabeledProduct Description (Time Line: 1975 — 1996)The Marq21 retrofit buckets are designed to fit into Marq21MCCs. Marq21 was created from the forge of two of theworld’s foremost electrical companies, Siemens-Allis. Unitswidths are normally 15" or 20" wide, and 12" tall with 6"increments.15MOTOR CONTROLCENTERSThe original Marq21 came with a variety of CB and startersfrom ITE and Allis-Chambers. The standard lead-time fordelivery is 24 hrs – 3 weeks.Note: Original components are not available. Today, weprovide you with Sentron breakers and Siemens starters.Replacement CapabilitiesStarter UnitsReplacement starters are available for all plug-in and Nonplug-in units. A complete units for adding to an existing MCCincludes a unit door, divider pans and all necessary mountinghardware. Features of the replacement units include:▪ Siemens Starter Size 1-6▪ CT, CPT, PT▪ CB and fusible▪ Pilot Devices▪ Relays and Fuses▪ UL LabeledSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 15-13

Motor Control Center Replacement UnitsMark 2Aftermarket OverviewProduct Description (Time Line: 1972 — 1975)The Mark 2 retrofit buckets are designed to fit into their olddesign. This is an upgrade from the Mark 1 in ValueLine family.Unit widths are normally 15" or 20" wide, and 12" tall with 6"increments.The original Mark 2 came with a variety of CB and startersfrom Westinghouse and Allis-Chalmers. The standard leadtimefor delivery is 24 hrs – 3 weeks.Add-on MCCs:New TIASTAR MCC can be spliced to existing line-up.Note: Original components are not available. Today, weprovide you with Sentron breakers and Siemens starters.15MOTOR CONTROLCENTERS5600Replacement CapabilitiesStarter UnitsReplacement starters are available in plug-in Non plug units. Acomplete unit for adding to an existing MCC includes a unitdoor, divider pans and all necessary mounting hardware.Features of the replacement units include:▪ Siemens Starter Size 1-6▪ CT, CPT, PT▪ CB and Fusible▪ Pilot Devices▪ Relays, Fuses▪ UL LabeledProduct Description (Time Line: 1971 — 1992)The 5600 MCC retrofit buckets are designed to fit into theirold design. 5600 units are 15" wide buckets and the fixmounted panels are 20" wide.The original Gould came with a variety of old CB and startersfrom ITE, Rowan, and AMP-CAP. These buckets are availableup to NEMA size 5. The standard lead-time for delivery is 24hrs – 3 weeks.Note: Original components are not available. Today, weprovide you with Sentron breakers and Siemens starters.Replacement CapabilitiesStarter UnitsReplacement starters are available for all plug-in and Nonplug-in units. A complete unit for adding to an existing MCCincludes a unit door, divider pans and all necessary mountinghardware. Features of the replacement units include:▪ Siemens Starter Size 1-6▪ CT, CPT, PT▪ CB and Fusible▪ Pilot Devices, Relays,and Fuses▪ UL Labeled▪ Shelf is ordered separately15-14Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

16SPEEDFAX TM 2007-2008 Control ProductsContentsWhat’s New 16-3Product Overview 16-4NEMA & General Purpose ControlManual ControlFractional HP Starters, Class SMF 16-5 – 16-6Switches, Class MMS and MRS 16-7 – 16-8Starters and Switches, Class 11 - 3RV 16-9 – 16-10NEMA ControlCatalog Numbering System 16-11Non-Combination Starters Features and Benefits 16-12 – 16-13Non-Reversing Starters, Class 14 16-14 – 16-16Combination Starters Features and Benefits 16-17Combination Starters, Class 17 and 18 16-18 – 16-26Reversing Starters, Class 22 16-27 – 16-28Combination Reversing Starters, Class 25 and 26 16-29 – 16-30Two Speed Starters Features and Benefits 16-31Two Speed Starters, Class 30 16-32 – 16-35Combination Two Speed Starters, Class 32 16-36 – 16-43Non-Reversing Contactors, Class 40 16-44 – 16-45Vacuum Contactors, Class 40 16-45Reversing Contactors, Class 43 16-46Overload Relays, Class 48, 958 and 3RB20 16-47 – 16-49Current Sensitive Relays, Class 97 16-50 – 16-51Duplex ControllersFeatures and Benefits 16-52Non Combination, Class 83 16-53Combination, Class 84 16-54 – 16-55Pump Control PanelsFeatures and Benefits 16-56 – 16-57Full-Voltage Type, Class 87 16-58 – 16-59Reduced-Voltage Type, Class 88 16-60 – 16-61Vacuum Starter Type, Class 87 16-62Reduced Voltage ControlReduced Voltage Features and Benefits 16-63Auto Transformer Starters, Class 36 and 37 16-64Part Winding Starters, Class 36 and 37 16-65Wye Delta Open Transition, Class 36 and 37 16-66Wye Delta Closed Transition, Class 36 and 37 16-67Lighting ControlElectrically Held Contactors, LE 16-68 – 16-70Mechanically Held Contactors, CLM 16-71 – 16-73Control Power TransformersDomestic and International (UL, CSA and CE), Class MT and MTG 16-74 – 16-78Modifications and DrawingsField Modification Kits 16-79 – 16-89Enclosure Kits 16-90 – 16-93Factory Modifications 16-94 – 16-98Dimensions 16-99– 16-128Wiring Diagrams 16-129 – 16-14716 CONTROLPRODUCTSResidential Commercial Industrial

16SPEEDFAX TM 2007-2008 Control Products16CONTROLPRODUCTSContentsHeater Tables and Replacement PartsOverload Relay Heater Tables 16-148 – 16-154NEMA Coils and Contact Kits 16-155 – 16-156Coil VA Ratings and Overload Relays 16-157Lighting Contactor Parts and Kits 16-158 – 16-159Definite Purpose ControlGeneral Application - Class 42 and 45 16-160 – 16-161Soft Starters ControlElectronic Soft Starts, 3RW 16-162 – 16-167Control Products, 3RW 16-168 – 16-176Mods and Dimensions 16-177 – 16-178Wiring Diagrams 16-179Pilot DevicesClass 50 Standard Duty Control StationsIntroduction 16-180Standard Duty Type 1 and 1B 16-181 – 16-185Heavy Duty Type 4 Stations 16-186Class 50 Accessories 16-187Class 50 Standard Duty Dimension Drawings 16-188Class 52 30mm Mounting Diameter Pilot DevicesIntroduction 16-189Complete Pushbutton units 16-189 – 16-190Push-pull Mushroom Pushbuttons 16-191 – 16-192Indicator lights-Push to Test Lights-Illuminated Pushbuttons 16-193 – 16-194Pushbuttons and Push-pull Operators 16-195Selector Switch Operators 16-196 – 16-198Keyed Selector Switches 16-199Specialty Operators 16-200 – 16-201Class 52 Black Max N4-4X-13Complete Units 16-202Pushbuttons and Push-pull Operators 16-203 – 16-204Selector Switch Operators 16-205Indicator lights-Push to Test Lights-Illuminated Pushbuttons 16-206 – 16-207Class 52 30mm Enclosed Pushbutton StationsSelector Switch Operators 16-208Cam Selection Chart for Selector Switches 16-209Custom Order Pushbutton Stations 16-210Accessories and Spare Parts 16-211 – 16-213Dimensional Drawings 16-214 – 16-215Assembled Enclosures with Standard Devices. 16-216 – 16-217P30 Empty Enclosures Only 16-218Enclosure Legend Plates 16-219Enclosure Dimension 16-220Residential Commercial Industrial

Control ProductsWhat ’ s NewCatalog Enhancements▪ Section 16 pages have been restructured according toproduct group for even better organization. Each productgroup is identified by a sub-tab on each page. The groupsconsist of:—NEMA & General Purpose Control—Definite Purpose Control—Soft Starter Control—Pilot Devices▪ Class 97 Current Sensitive Relay dimensions and wiringdiagram added. See pages 16-108 and 16-143.▪ Class MRS Fractional HP Switch wiring diagrams added.See page 16-129.Enclosure Kits for Lighting & Heating ContractorsEnclosure kits are now available for Class LE and CLM Lighting& Heating Contactors. These enclosure kits allow you to addvalue by assembling enclosed lighting & heating contactors inthe field. (Contactor and modification kits are sold separately.)See page 16-91.Class 40with ShieldClass 14with ShieldClass 17with ShieldProtective Shields - Protect Against Accidental Contactwith NEMA ProductsProtective shields can be added to open and enclosed NEMAcontactors and starters, as well as fusible or non-fusibledisconnect switches in combination starters and pump panels.Protective shields provide protection against accidental contactwith live parts such as line and load terminals, auxiliarycontacts and coil terminals.Contactor and starter shields allow access to terminals and thereset button on overloads without removing the shield.▪ The shields are designed for use on Class 40 contactors andClass 14 starter sizes 00 to 4.▪ The same shield used on Class 14 starters can be used oneither solid state or bimetal overloads.▪ Shields used on disconnect switches are designed for30-200A switches in either combination starters or pumpcontrol panels.▪ Shield covers both switch and load base fuse clips wheninstalled.See page 16-82.16 CONTROLPRODUCTSHandle and Mechanism Replacement KitsHandle & Mechanism replacement kits are now availablefor class 17, 18, 25, 26, & 32. The replacement kits includethe operator handle, link rod, mechanism and all necessaryhardware. See page 16-159.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-3

Control ProductsNEMA & General Purpose ControlsProduct OverviewClass SMFFractional HorsepowerManual StartersPage 16-5Class MMS & MRSFractional HorsepowerManual SwitchesPage 16-7Class 11Manual Starters andSwitchesPage 16-9Class 14NEMA StartersPage 16-14Class 17, 18NEMA CombinationStartersPage 16-18Class 22NEMA ReversingStartersPage 16-27Class 25, 26NEMA CombinationReversing StartersPage 16-29Class 30NEMA Multi-SpeedStartersPage 16-32Class 32NEMA CombinationMulti-Speed StartersPage 16-36Class 36, 37Reduced VoltageElectromechanicalStartersPage 16-64CONTROLPRODUCTS16Class 40NEMA Contactorsand Vacuum ContactorsPage 16-44Class 43NEMA ReversingContactorsPage 16-46Class 48, 958, 3RB20Overload RelaysPage 16-47Class 83, 84, 87, 88Pump ControlsPage 16-53Class 97Current Sensitive RelaysPage 16-50Class LE, CLMLighting ContactorsPage 16-68Class MT, MTGControl PowerTransformersPage 16-74Modifications andDrawingsPage 16-79Heater Tables andReplacement PartsPage 16-14816-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Manual ControlFractional HP Starters, Class SMFClass SMFClass SMF fractional horsepowerstarters provide overload protection aswell as manual on-off control for smallhorsepower motors in a variety ofindustrial and commercial applications.Available in one or two pole versions,these devices are suitable for use withAC single phase motors up to 1 HP.Two pole starters can also be usedwith DC motors up to 3 ⁄4 HP. Typicalapplications include fans, conveyors,pumps, and small machine tools.Continuous Current Rating16 amperes.Overload Trip AssemblyMotor protection is provided by a ClassSMFH heater element which must beinstalled before the starter will operate.Two Speed StartersTwo speed manual starters aredesigned for control of small singlephase AC motors having separatewindings for high and low speedoperation. Two toggle operated startersare used, with overload protectionincluded for each motor winding.Surface mounting devices, and thosewith a gray flush plate, utilize amechanical interlock which allowsdirect control of the motor by meansof the toggle operators.EnclosuresClass SMF, NEMA Type 1 surfacemounting enclosures are sheet steelwith a thermo-plastic wrap-around coverfor convenience in wiring. The NEMAType 1 enclosure is also available in anoversized version which allows morewiring space. A zinc alloy die casting isused for NEMA Type 4 enclosures.Pilot LightsRed or green neon pilot light unitsare available for flush mounting plates,NEMA Type 1 enclosures, and NEMAType 4 enclosures. Pilot lights may beeither factory or field installed. (Forstarters that contain a pilot light, a Redlight is standard. For a Green pilot lightadd ”G” to the end of the catalognumber.)TerminalsBinding head screw type terminals aresuitable for #10 or smaller copper wire,and are accessible from the front. Allterminals are clearly marked.MountingOpen types without a pilot light fitstandard single gang switch boxes, andcan be used with any cover plate havinga standard toggle cutout. Single-unitflush mounting types, including thosewith pilot lights, are suitable for wallmounting in a standard switch box orfor machine cavity mounting withouta box.OperationAvailable with toggle handle or withremovable key type operator todiscourage unauthorized operation.GeneralClass SMF Starter in a NEMA Type 1Enclosure with Pilot LightEmergency Off ActuatorA toggle operator extender is availablefor Class SMF, NEMA Type 1 surfacemounted units. The extender has a redvinyl button that provides a fast andeasy method for locating and switchingthe device‘s toggle operator into theOFF position. The Emergency OffActuator is available in kit form onlyfor field installation.Handle Guard/Lock-OffAn optional handle guard on ClassSMF, NEMA Type 1 enclosed startersprevents accidental operation of thetoggle operator and also allows thetoggle operator to be padlocked ineither the “ON” or “OFF” position.This handle guard can be factoryinstalled on NEMA Type 1 enclosedstarters and is also available in kit formfor field installation on NEMA Type 1surface and flush mounting enclosures.Standard NEMA Type 4 metallicenclosures include provisions forpadlocking the device in theOFF position.16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-5

Manual ControlFractional HP Starters with Melting Alloy Overload, Class SMFSelectionOrdering Information Heater Elements see page 16-148. Field Modification Kits see page 16-79. Dimensions see pages 16-99. Wiring Diagrams see page 16-129.Horsepower RatingsMaximum HorsepowerAC Single Phase DCVolts 1-Pole 2-Pole 2-Pole115–230 1 1 3⁄416CONTROLPRODUCTSNEMA & GeneralPurpose ControlStarter—Class SMF, Single Phase Starter With Handle Guard/Lock-Off—Class SMF, Single Phase ToggleClass SMF Starter in a NEMA Type 1Enclosure with Pilot LightOne Starter in Duplex Enclosure—Class SMF, Single Phase General Purpose Flush MountingOpen Starter with Flush Plate - (No Enclosure Provided)277 1 1 —General Purpose Flush Mounting NEMA Type 1 General Purpose NEMA Type NEMA NEMA TypeOpen Starter with Flush Plate Enclosure, Surface Mounting 3R, 4 & 12 Type 4 3R, 7 & 9(No Enclosure Provided) Watertight, Watertight, Div 1 and Div 2Dust-tight Dust-tight Class I GroupsMetallic Metallic B, C, D &Standard JumboEnclosure Enclosure Class II GroupsGray Stainless Stainlesswith Clear CoverE, F, GFlush Steel SteelEnclosuresType Open Type Plate Flush Plate Flush Plate Standard Oversizedof No. of Catalog List Catalog List Catalog List Catalog List Catalog List Catalog List Catalog List Catalog List Catalog ListOperator Poles Starter Features Number Price $ Number Price $ Number Price $ Number Price $ Number Price $ Number Price $ Number Price $ Number Price $ Number Price $Standard SMFF01 43.00 SMFFF1 48.00 SMFFS1 50.00 — — SMFFG1 51.00 SMFFGJ1 61.00 SMFFWN1 182.00 — — — —1Red Pilot Light SMFF01P 69.00 SMFFF1P 72.00 SMFFS1P 77.00 SMFFSJ1P 90.00 SMFFG1P 77.00 SMFFGJ1P 86.00 SMFFWN1P 189.00 — — — —ToggleStandard SMFF02 51.00 SMFFF2 56.00 SMFFS2 61.00 — — SMFFG2 61.00 SMFFGJ2 69.00 SMFFWN2 249.00 — — — —2Red Pilot Light SMFF02P 77.00 SMFFF2P 82.00 SMFFS2P 86.00 SMFFSJ2P 100.00 SMFFG2P 86.00 SMFFGJ2P 96.00 SMFFWN2P 258.00 — — — —Standard SMFF03 61.00 SMFFF3 65.00 SMFFS3 69.00 — — SMFFG3 69.00 SMFFGJ3 77.00 SMFFWN3 198.00 — — — —1Red Pilot Light SMFF03P 86.00 SMFFF3P 82.00 SMFFS3P 96.00 SMFFSJ3P 107.00 SMFFG3P 96.00 SMFFGJ3P 103.00 SMFFWN3P 207.00 — — — —KeyStandard SMFF04 69.00 SMFFF4 72.00 SMFFS4 77.00 — — SMFFG4 77.00 SMFFGJ4 86.00 SMFFWN4 268.00 — — — —2Red Pilot Light SMFF04P 96.00 SMFFF4P 100.00 SMFFS4P 103.00 SMFFSJ4P 117.00 SMFFG4P 103.00 SMFFGJ4P 111.00 SMFFWN4P 276.00 — — — —Standard — — — — — SMFFG5 61.00 SMFFGJ5 69.00 — — SMFFW1 193.00 SMFFR1 211.00Red Pilot Light — — — — — SMFFG5P 86.00 SMFFGJ5P 96.00 — — SMFFW1P 262.00 — —1 (2) 3 ⁄4" NPT Outlets — — — — — — — — — — — SMFFW1H 211.00 SMFFR1H 228.00(2) 3 ⁄4" NPT Outlets— — — — — — — — — — — SMFFW1PH 279.00 — —and Red Pilot LightStandard — — — — — SMFFG6 69.00 SMFFGJ6 77.00 — — SMFFW2 203.00 SMFFR2 219.00Red Pilot Light — — — — — SMFFG6P 98.00 SMFFGJ6P 103.00 — — SMFFW2P 272.00 — —2 (2) 3 ⁄4" NPT Outlets — — — — — — — — — — — SMFFW2H 219.00 SMFFR2H 237.00(2) 3 ⁄4" NPT Outlets— — — — — — — — — — — SMFFW2PH 289.00 — —and Red Pilot LightGray Flush Plate Stainless Steel Flush NEMA Type 1 GeneralFor Wall or Cavity Plate for Wall or Cavity Purpose Enclosure ReplacementType of Number Mounting Mounting Surface Mounting StartersOperator of Poles Starter Features Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $Toggle 2Standard — — — — SMFFG02 96.00 — —Red Pilot Light — — — — SMFFG02P 121.00 — —Key 2 Red Pilot Light — — — — SMFFG04P 121.00 — —Two Starters In Duplex Enclosure—Class SMF, Single Phase Standard SMFFF222 138.00 — — SMFFG222 147.00 — —Toggle 2 Per StarterRed Pilot Light on Each Starter SMFFF222P 233.00 SMFFS22P 242.00 SMFFG222P 242.00 — —Key 2 Per Starter Red Pilot Light on Each Starter SMFFF44P 268.00 SMFFS44P 276.00 SMFFG44P 276.00 — —Starter And “Auto-Off-Hand” SPDT Selector Switch (AC Only)—Class SMF, Single Phase Standard SMFFF71 125.00 — — SMFFG71 133.00 — —1Red Pilot Light SMFFF71P 151.00 SMFFS71P 160.00 SMFFG71P 160.00 — —ToggleStandard SMFFF72 133.00 — — SMFFG72 142.00 — —2Red Pilot Light SMFFF72P 160.00 SMFFS72P 168.00 SMFFG72P 168.00 — —Key 2 Red Pilot Light SMFFF74P 176.00 SMFFS74P 186.00 SMFFG74P 186.00 — —Two Speed Starters (AC Only)—Class SMF, Single Phase ToggleMechanical Interlock SMFFF11 182.00 — — SMFFG11 189.00 SMFF01T 51.001 Mechanical Interlock and (2) Red Pilot Lights SMFFF11P 276.00 — — SMFFG11P 285.00 SMFF01PT 77.00Mechanical Interlock, HIGH-OFF-LOWSelector Switch and (2) Red Pilot Lights— — SMFFS101P 285.00 — — SMFF01PT 77.00Mechanical Interlock SMFFF22 198.00 — — SMFFG22 207.00 SMFF02T 61.002 Mechanical Interlock and (2) Red Pilot Lights SMFFF22P 293.00 — — SMFFG22P 302.00 SMFF02PT 86.00Mechanical Interlock, HIGH-OFF-LOWSelector Switch and (2) Red Pilot Lights— — SMFFS202P 302.00 — — SMFF02PT 86.00 One heater element required. Furnished with (1) 3 ⁄4" NPT Outlet in bottom(reversible for top feed). Two heater elements required. Order Open Type starter plus separate handle guard kit. For starters that contain a pilot light, a Red light isstandard. For a Green pilot light add ”G” to the end ofthe catalog number.16-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Manual ControlFractional HP Switches, Class MMS, MRSClass MMS, MRSClass MMS and MRS motor startingswitches provide manual “ON-OFF”control of single or three phase ACmotors where overload protection isnot required or is provided separately.Compact construction and a 600 voltrating make these switches suitablefor a wide range of industrial andcommercial uses. Typical applicationsinclude small machine tools, pumps,fans, conveyors and many other typesof electrical machinery. They can alsobe used on non-motor loads such asresistance heating applications.Continuous Current RatingMMS & MRS: 30 amperes at 250volts max, 26.4 amperes at 277 volts,20 amperes at 600 volts max, 30amperes resistive at 600 volts max.Two Speed—Class MRSTwo speed manual switches may beused with separate winding three phaseor single phase AC motors whereoverload protection is not required or isprovided separately. Two switches areemployed to give “ON-OFF” control ineach speed.Reversing—Class MRSReversing manual switches providea compact means of starting, stoppingand reversing AC motors whereoverload protection is not required oris provided separately. They are suitablefor use with three phase squirrel cagemotors and for single phase motorswhich can be reversed by reconnectingmotor leads. Two switches are used,one to connect the motor forwardrotation and one for reverse.EnclosuresClass MMS, MRS, NEMA Type 1surface mounting enclosures are sheetsteel with a thermo-plastic wrap-aroundcover for convenience in wiring.The NEMA Type 1 enclosure is alsoavailable in an oversized version whichallows more wiring space. A zinc alloydie casting is used for NEMA Type 4enclosures.Pilot LightsRed or green neon pilot light unitsare available for flush mounting plates,NEMA Type 1 enclosures, and NEMAType 4 enclosures. Pilot lights may beeither factory or field installed. (Forswitches that contain a pilot light, a Redlight is standard. For a Green pilot lightadd ”G” to the end of the catalognumber.)TerminalsBinding head screw type terminals aresuitable for #10 or smaller copper wire,and are accessible from the front. Allterminals are clearly marked.MountingOpen types without a pilot light fitstandard single gang switch boxes, andcan be used with any cover plate havinga standard toggle cutout. Single-unitflush mounting types, including thosewith pilot lights, are suitable for wallmounting in a standard switch box orfor machine cavity mounting withouta box.OperationAvailable with toggle handle or withremovable key type operator todiscourage unauthorized operation.Class MMS Switch in aNEMA Type 1 EnclosureGeneralEmergency Off ActuatorA toggle operator extender is availablefor Class MMS, MRS, NEMA Type 1surface mounted units. The extenderhas a red vinyl button that provides afast and easy method for locating andswitching the device‘s toggle operatorinto the OFF position. The EmergencyOff Actuator is available in kit formonly for field installation.Handle Guard/Lock-OffAn optional handle guard on ClassMMS, MRS, NEMA Type 1 enclosedswitches prevents accidental operationof the toggle operator and also allowsthe toggle operator to be padlocked ineither the “ON” or “OFF” position. Thishandle guard is available in kit form forfield installation on NEMA Type 1surface and flush mounting enclosures.Standard NEMA Type 4 metallicenclosures include provisions forpadlocking the device in theOFF position.16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-7

Manual ControlSwitches , Class MMS, MRSOrdering InformationHorsepower RatingsSelectionClass MMS Switch in aNEMA Type 1 EnclosureHeater Elements not Required. Field Modification Kits seepage 16-79. Dimensions see pages 16-99. Wiring Diagrams see page 16-129.No of Motor TypeMaximum HPDC RatingsDevice Poles AC 115V 230V 450–575V 90V 115V 230VClass MMS2 Single Phase 2 2 3 1 2 1 1 /23 3-Phase 2 7 1 /2 10 1 2 1 1 /2Class MRS 2 Single Phase 2 2 3 1 2 1 1 /2Reversing 3 3-Phase 2 7 1 /2 10 1 2 1 1 /22 Single Phase 2 2 3 1 2 1Class MMS/23 3-Phase, Constant or Variable Torque 2 7Two Speed/2 10 1 2 1 1 /23 3-Phase, Constant Horsepower 2 7 1 /2 10 1 2 1 1 /2Switch—Class MMS, Single Phase and 3-Phase16CONTROLPRODUCTSNEMA & GeneralPurpose ControlGeneral Purpose Flush Mounting NEMA Type 1 General Purpose NEMA Type NEMA NEMAOpen Switch with Flush Plate Enclosure Surface Mounting 3R, 4 & 12 Type 4 Type 7 & 9 (No Enclosure Provided) Watertight, Watertight, Class I GroupsStandard Jumbo Dust-tight Dust-tight B, C & D &Gray Stainless Stainless Metallic Enclosurer Metallic Class II Groupswith Clear Cover Enclosure E, F, GFlush Steel SteelEnclosuresType No Open Type Plate Flush Plate Flush Plate Standard Oversizedof of Switch Catalog List Catalog List Catalog List Catalog List Catalog List Catalog List Catalog List Catalog List Catalog ListOperator Poles Features Number Price $ Number Price $ Number Price $ Number Price $ Number Price $ Number Price $ Number Price $ Number Price $ Number Price $Standard MMSK01 32.00 MMSKF1 36.00 MMSKS1 40.50 — — MMSKG1 40.50 MMSKGJ1 49.00 MMSKWN1 170.00 MMSKW1 189.00 MMSKR1 207.002Red Pilot Light115V AC MMSK01A 75.00 MMSKF1A 80.00 MMSKS1A 83.00 MMSKSJ1A 97.00 MMSKG1A 83.00 MMSKGJ1A 91.00 MMSKWN1A 212.00 MMSKW1A 258.00 — —ToggleKeyReversing Switch—Class MRS, Single Phase and 3-PhaseGeneral PurposeFlush Mounting NEMA Type 1Open Switch with Flush Plate General Purpose Replacement SwitchType of Number of Suitable Switch Features (Including (No Enclosure Provided) Enclosure Surface Mounting Class MRSOperator Poles Motor Types Mechanical Interlock) Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ToggleRed Pilot Light230V ACMMSK01B 75.00 MMSKF1B 80.00 MMSKS1B 83.00 MMSKSJ1B 97.00 MMSKG1B 83.00 MMSKGJ1B 91.00 MMSKWN1B 212.00 MMSKW1B 258.00 — —3 Standard MMSK02 82.00 MMSKF2 86.00 MMSKS2 90.00 — — MMSKG2 90.00 MMSKGJ2 100.00 MMSKWN2 212.00 MMSKW2 233.00 MMSKR2 254.00Red Pilot Light208-240V AC MMSK02B 125.00 MMSKF2B 130.00 MMSKS2B 133.00 MMSKSJ2B 147.00 MMSKG2B 133.00 MMSKGJ2B 142.00 MMSKWN2B 281.00 MMSKW2B 302.00 — —Red Pilot Light440-600V ACMMSK02C 125.00 MMSKF2C 130.00 MMSKS2C 133.00 MMSKSJ2C 147.00 MMSKG2C 133.00 MMSKGJ2C 142.00 MMSKWN2C 281.00 MMSKW2C 302.00 — —23Standard MMSK03 49.00 MMSKF3 54.00 MMSKS3 57.00 — — MMSKG3 57.00 MMSKGJ3 69.00 MMSKWN3 187.00 — — — —Red Pilot Light115V AC MMSK03A 91.00 MMSKF3A 97.00 MMSKS3A 101.00 MMSKSJ3A 111.00 MMSKG3A 101.00 MMSKGJ3A 107.00 MMSKWN3A 229.00 — — — —Red Pilot Light230V ACMMSK03B 91.00 MMSKF3B 97.00 MMSKS3B 101.00 MMSKSJ3B 111.00 MMSKG3B 101.00 MMSKGJ3B 107.00 MMSKWN3B 229.00 — — — —Standard MMSK04 127.00 MMSKF4 103.00 MMSKS4 107.00 — — MMSKG4 107.00 MMSKGJ4 117.00 MMSKWN4 237.00 — — — —Red Pilot Light208–240V AC MMSK04B 142.00 MMSKF4B 147.00 MMSKS4B 151.00 MMSKSJ4B 163.00 MMSKG4B 151.00 MMSKGJ4B 160.00 MMSKWN4B 306.00 — — — —Red Pilot LightMMSK04C440–600V AC142.00 MMSKF4C 147.00 MMSKS4C 151.00 MMSKSJ4C 163.00 MMSKG4C 151.00 MMSKGJ4C 160.00 MMSKWN4C 306.00 — — — —Single Phase Standard MRSKF11 163.00 MRSKG11 172.00 MRSK01T 40.502 3-Lead Red Pilot Device—115V AC MRSKF11A 233.00 MRSKG11A 242.00 MRSK01AT 83.00Repulsion-Induction Red Pilot Device— 230V AC MRSKF11B 233.00 MRSKG11B 242.00 MRSK01BT 83.003-Phase; AlsoStandard MRSKF22 258.00 MRSKG22 268.00 MRSK02T 90.00Single Phase Capacitor, Red Pilot Light—110–120V AC MRSKF22A 328.00 MRSKG22A 336.00 MRSK02AT 133.003Split Phase, or 4-Lead Red Pilot Light—208–220V AC MRSKF22B 328.00 MRSKG22B 336.00 MRSK02BT 133.00Repulsion-InductionRed Pilot Light—440–600V AC MRSKF22C 328.00 MRSKG22C 336.00 MRSK02CT 133.00Two Speed Switch—Class MMS, Single Phase and 3-PhaseGeneral PurposeFlush Mounting NEMA Type 1Open Switch with Flush Plate General Purpose Replacement SwitchType of Number of Suitable Switch Features (Including (No Enclosure Provided) Enclosure Surface Mounting Class MRSOperator Poles Motor Types Mechanical Interlock) Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ToggleSingle Phase Standard MMSKF11 163.00 MMSKG11 172.00 MRSK01T 40.502 Two Winding (2) Red Pilot Devices—115V AC MMSKF11A 302.00 MMSKG11A 310.00 MRSK01AT 83.00(3-Lead) (2) Red Pilot Devices—230V AC MMSKF11B 302.00 MMSKG11B 310.00 MRSK01BT 83.003-Phase Standard MMSKF22 258.00 MMSKG22 268.00 MRSK02T 90.003 Separate Winding (2) Red Pilot Lights—208–240V AC MMSKF22B 396.00 MMSKG22B 405.00 MRSK02BT 133.00(Wye-Connected) (2) Red Pilot Lights—440–600V AC MMSKF22C 396.00 MMSKG22C 405.00 MRSK02CT 133.00 Manual switches do not include overloads. Furnished with (1) 3/4" NPT outlet in bottom (reversiblefor top feed). In order to obtain a 3 ⁄4" NPT outlet in topand bottom, add suffix letter “H” to type number and add$16 to List Price. Do not use as replacement interiors for NEMA Type 4metallic enclosures. For replacement unit, orderType MMSK01 or MMSK02 and separate pilot light kit. For switches that contain a pilot light, a Red light isstandard. For a Green pilot light add ”G” to the endof the catalog number.16-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Manual ControlStarters and Switches, Class 11 - 3RVClass 11 - 3RVClass 11 across the line manualstarters and switches provide controlfor machinery where remote start stopcontrol is not required.Class 11 - 3RV manual starters areused for single and poly-phase motorsup to 20HP @ 575V. Starters havebimetallic heater elements to provideclass 10 overcurrent protection. Eachstarter has a fourth bimetallic strip thatreacts only to the ambient temperatureinside the control panel. This ambientcompensation helps prevent the starterfrom nuisance tripping when the paneltemperature is higher than the ambienttemperature of the motor.A built-in differential trip bar causes thestarter to trip faster on a phase losscondition to help reduce motor damage.Magnetic trip elements in each startertake the device off line when it sensescurrent of 13 times the maximum FLAdial setting.Class 11 - 3RV switches providecontrol for inherently protected motors.Typical applications include metal andwoodworking machinery, grinders,power saws, conveyors, fans, pumps,blowers, textile and packagingmachinery, and paper cutters.Each switch is provided with magnetictrip elements which take the device offline when it senses current of 13 timesthe maximum switch rating.Class 11 - 3RV manual starters can beused as Type E self-protected manualcombination starters (up to 22 amps)per UL508 or as components inGroup Installation per NEC 430.53.When using the Class 11 - 3RV as amanual combination starter upstreamprotection is not required.Class 11 - 3RV controllers are availablewith low voltage protection which willautomatically open the power poleswhen the voltage drops or the poweris interrupted.Controllers with the LVP option providethe OSHA requirements for protectingpersonnel from potential injury causedby the automatic start-up of machineryfollowing a voltage drop or powerinterruption when low voltageprotection is specified.GeneralClass 11 - 3RV is available as Openstyle, or in NEMA 1, NEMA 7 & 9 orNEMA 7 & 9 / 3 & 4 enclosures.Standard Features include:▪ ON/OFF rotary handle with lockoutand visible trip indication▪ Adjustment dial for setting to motorFLA (Starters only)▪ Low Voltage Protection (LVP) Option▪ Short Circuit trip at 13 times themaximum setting of the FLA dialor rated current▪ Ambient compensated up to 140°F▪ Phase loss sensitivity▪ Test trip function▪ LVP Option Meets OSHARequirements▪ UL Listed▪ CSA Certified16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlOPEN TYPEStarterNEMA 1General PurposeNEMA 7 & 9Div 1 & Div 2Class I Group C & DClass II Group E, F & GNEMA 3 & 4, NEMA 7 & 9Div 1 & Div 2Class I Group C & DClass II Group E, F & GSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-9

Manual ControlStarters and Switches, Class 11 - 3RVOrdering InformationLow Voltage Protection Coil TableSelectionClass 11 Manual Motor Starter No heaters required. Field modification kits see page 16-79. Dimensions see page 16-101. Wiring Diagrams see page 16-129. For applications requiring a low voltage protection coilsee table at right.60 Hz Voltage Letter120V* F208V* D240V* G460V* H*Add corresponding letter to end of base Class 11catalog number for low voltage protection coil.$96.00 list adder.Note: The LVP option for Open type 3RV is availablefrom the factory, please order separately from thefield modification kits on page 16-80.The coil voltage should correspond with theline voltage.Manual Starter—Class 11 - 3RVFLA Max HP EnclosureAdjustment Single Phase 3-Phase Open Type NEMA 1 NEMA 7 & 9 NEMA 3 & 4, NEMA 7 & 9 Range HP Ratings HP Ratings General Purpose Class I Groups C & D Watertight (Outdoor use)Class II Groups E, F & G Class I Groups C & DClass II Groups E, F & G16CONTROLPRODUCTSNEMA & GeneralPurpose Control115V 230V 200V 230V 460V 575V Catalog Number List Price $ Catalog Number List Price $. Catalog Number List Price $ Catalog Number List Price $0.11-0.16 — — — — — — 3RV1021-0AA10 145.00 11AD3B 160.00 11AD3H 555.00 11AD3W 652.000.14-0.2 — — — — — — 3RV1021-0BA10 145.00 11BD3B 160.00 11BD3H 555.00 11BD3W 652.000.18-0.25 — — — — — — 3RV1021-0CA10 145.00 11CD3B 160.00 11CD3H 555.00 11CD3W 652.000.22-0.32 — — — — — — 3RV1021-0DA10 145.00 11DD3B 160.00 11DD3H 555.00 11DD3W 652.000.28-0.4 — — — — — — 3RV1021-0EA10 145.00 11ED3B 160.00 11ED3H 555.00 11ED3W 652.000.35-0.5 — — — — — — 3RV1021-0FA10 160.00 11FD3B 189.00 11FD3H 586.00 11FD3W 682.000.45-0.63 — — — — — — 3RV1021-0GA10 160.00 11GD3B 189.00 11GD3H 586.00 11GD3W 682.000.55-0.8 — — — — — 1⁄2 3RV1021-0HA10 160.00 11HD3B 189.00 11HD3H 586.00 11HD3W 682.000.7-1 — — — — 1⁄21⁄2 3RV1021-0JA10 160.00 11JD3B 189.00 11JD3H 586.00 11JD3W 682.000.9-1.25 — — — — 3⁄43⁄4 3RV1021-0KA10 160.00 11KD3B 189.00 11KD3H 586.00 11KD3W 682.001.1-1.6 — 1⁄10 — — 3⁄4 1 3RV1021-1AA10 160.00 11LD3B 189.00 11LD3H 586.00 11LD3W 682.001.4-2 — 1⁄8 — — 1 1 1 ⁄2 3RV1021-1BA10 160.00 11MD3B 189.00 11MD3H 586.00 11MD3W 682.001.8-2.5 — 1⁄61⁄21⁄2 1 1 ⁄2 1 1 ⁄2 3RV1021-1CA10 160.00 11ND3B 189.00 11ND3H 586.00 11ND3W 682.002.2-3.2 1⁄101⁄43⁄43⁄4 1 1 ⁄2 2 3RV1021-1DA10 160.00 11PD3B 189.00 11PD3H 586.00 11PD3W 682.002.8-4 1⁄81⁄33⁄4 1 2 3 3RV1021-1EA10 160.00 11QD3B 189.00 11QD3H 586.00 11QD3W 682.003.5-5 1⁄61⁄2 1 1 3 3 3RV1021-1FA10 160.00 11RD3B 189.00 11RD3H 586.00 11RD3W 682.004.5-6.3 1⁄43⁄4 1 1 ⁄2 1 1 ⁄2 5 5 3RV1021-1GA10 160.00 11SD3B 189.00 11SD3H 586.00 11SD3W 682.005.5-8 1⁄3 1 2 2 5 5 3RV1021-1HA10 160.00 11TD3B 189.00 11TD3H 586.00 11TD3W 682.007-10 1⁄2 1 1 ⁄2 3 3 7 1 ⁄2 10 3RV1021-1JA10 160.00 11UD3B 189.00 11UD3H 586.00 11UD3W 682.009-12.5 1⁄2 2 3 3 7 1 ⁄2 10 3RV1021-1KA10 191.00 11VD3B 233.00 11VD3H 689.00 11VD3W 785.0011-16 1 3 5 5 10 15 3RV1021-4AA10 191.00 11WD3B 233.00 11WD3H 689.00 11WD3W 785.0014-20 1 1 ⁄2 3 5 7 1 ⁄2 15 20 3RV1021-4BA10 191.00 11XD3B 233.00 11XD3H 689.00 11XD3W 785.0017-22 2 3 7 1 ⁄2 7 1 ⁄2 15 20 3RV1021-4CA10 191.00 11YD3B 233.00 11YD3H 689.00 11YD3W 785.0020-25 2 5 7 1 ⁄2 7 1 ⁄2 15 20 3RV1021-4DA10 191.00 11ZD3B 233.00 11ZD3H 689.00 11ZD3W 785.00Manual Switch—Class 11 - 3RVRated Max HP EnclosureCurrent Single Phase 3-Phase Open Type NEMA 1 NEMA 7 & 9 NEMA 3 & 4, NEMA 7 & 9HP Ratings HP Ratings General Purpose Class I Groups C & D WatertightClass II Groups E, F & G Class I Groups C & DClass II Groups E, F & G115V 230V 200V 230V 460V 575V Catalog Number List Price $. Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $1 — — — — 1⁄2 1 ⁄2 3RV1321-0JC10 154.00 111D3B 189.00 111D3H 586.00 111D3W 682.005 1⁄6 1 ⁄2 1 1 3 3 3RV1321-1FC10 154.00 112D3B 189.00 112D3H 586.00 112D3W 682.0010 1⁄2 1 1 ⁄2 3 3 7 1 ⁄2 10 3RV1321-1JC10 154.00 113D3B 189.00 113D3H 586.00 113D3W 682.0020 1 1 ⁄2 3 5 7 1 ⁄2 15 20 3RV1321-4BC10 185.00 114D3B 233.00 114D3H 689.00 114D3W 785.0025 2 5 7 1 ⁄2 7 1 ⁄2 15 20 3RV1321-4DC10 185.00 115D3B 233.00 115D3H 689.00 115D3W 785.00 Instantaneous Magnetic Trip will occur at 13 timesthe maximum FLA dial setting or rated switch current. Discount Code: IEC. Shaded Ratings apply for Manual Motor ControllersOnly! These Ratings do not apply as UL Listed ManualCombination Starters. Add 1 to the end of the catalog number for 1/2 inch drainhole with plug. Add $53. to the list price. Drain fitting notsupplied, order separately XDB-2.16-10Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Heavy Duty ControlCatalog Numbering SystemGeneralESP 100 ®Current Range Class17 — Combination Starter(Non Fusible, Fusible)18 — Combination Starter(Circuit Breaker)25 — ReversingCombination Starter(Non Fusible, Fusible)26 — ReversingCombination Starter(Circuit Breaker)SizeC — 0D — 1E — 1 3 ⁄4F — 2G — 2 1 ⁄2H — 3I — 3 1 ⁄2J — 4L — 5M — 6N — 7P — 8ModelP — Thermal size 00– 4,Solid state sizes 5& 6S — ESP100 size 0–3 1 ⁄2T — ESP100 size 4H — ESP100 size 7 & 8Enclosure Size92 — Standard Width82 — Extra WideThree PhaseA — .25–1B — .75–3D — 2.5–10E — 9–18F — 13–27G — 20–40H — 22–45J — 30–60K — 45–90L — 57–115M — 67–135U — 55–250X — 200–540Y — 420–820Z — 420–1220Enclosure TypeB — NEMA 1F — NEMA 4X FiberglassH — NEMA 7/9/3/4, bolted (Class 18 & 26 only)N — NEMA 12 Field convertible to 3/3R/4W — NEMA 4/4X Stainless SteelBreaker HP Code Horsepower Rating200, 230, 460, 575A — 1 ⁄2, 1 ⁄2,1, 1B — 1, 1, 3, 3C — 3, 3, 5, 5D — 3, 3, 7 1 ⁄2, 7 1 ⁄2E — 7 1 ⁄2, 7 1 ⁄2, 10, 10F — —, —, 15, 15G — 10, 10, —, —H — 7 1 ⁄2, 10, 20, 20J — 10, 15, 25, 25K — —, —, 30, 30L — 15, 20, —, —M — —, —, 30, 30N — 25, 30, 50, 50P — 30, 40, 75, 75R — 40, 50, 100, 100Class14 — Across the Line NEMAMotor Starter22 — Reversing NEMA MotorStarter40 — Across the Line NEMAMagnetic Contactor43 — Reversing NEMA MagneticContactorSizeB — 00C — 0D — 1E — 1 3 ⁄4 & 1PF — 2G — 2 1 ⁄2H — 3I — 3 1 ⁄2J — 4L — 5M — 6N — 7P — 8ModelP — Thermal size 00–3 1 ⁄2,Solid state sizes 5 &6G — Thermal size 4S — ESP100 size 00–3 1 ⁄2T — ESP100 size 4H — ESP100 size 7 & 8ESP 100 ®Current Range Three PhaseA — .25–1B — .75–3D — 2.5–10E — 9–18F — 13–27G — 20–40H — 22–45J — 30–60K — 45–90L — 57–115M — 67–135U — 55–250X — 200–540Y — 420–820Z — 420–1220Single Phase A — .25–1B — .75–3D — 2.5–10E — 5–16Pilot Control CircuitCoilA2 — suitable for— 110–120V/220–240V@60Hz110V/190–220V@50Hz3-wire controlC(NO aux.— 220–240V/440–480V@60Hz190–220V/380–440V@50Hzcontact incl.)D — 200–208V@60HzE — 550–600V@60Hz550V@50HzF — 120V@60HzPower Poles/Enclosure Size110V@50Hz1 — 2 power poles,1-phase G — 220–240V@60Hz3 — 3 power poles, 3-phase190–220V@50Hz82 — 3 power poles, 3-phase, H — 440–480V@60Hzextra wide enclosure380–440V@50HzJ — 24V@60Hz24V@50HzL — 277V@60Hz240V@50HzEnclosure TypeA — OpenB — NEMA 1F — NEMA 4X FiberglassH — NEMA 7/9/3/4 bolted0 — NEMA 12 Field convertible to 3/3R/4W — NEMA 4/4X Stainless Steel16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlClass36 — NonCombinationReducedVoltageStarter37 — CombinationReducedVoltageStarterSizeC — 0D — 1E — 1 3 ⁄4F — 2G — 2 1 ⁄2H — 3I — 3 1 ⁄2J — 4L — 5M — 6N — 7P — 8ModelS — ESP100size 0–4T — ESP100size 5–6H — ESP100size 7 & 8ESP 100 ®Current Range TypeLine VoltsT — Auto XFMR 2 — 230P — Part Wind. 3 — 3800 — Wye DeltaOpen Trans.45——460575C — Wye DeltaClosed Trans.6 — 200/208Enclosure Type CoilA — Open DB — NEMA 1 EW — NEMA 4/4X FStainless Steel G0 — NEMA 12 HLDisconnect Type D — Non Fused Disc.F — Fusible Disc.P — MCP Single phase ESP100 available on Class 14 Startersonly. Not used on Class 17, 25 or with ESP100 versions. Not available on sizes 5–8. For Class 37 only. Position used for ESP100 only. Not available on sizes 7 and 8.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-11

16CONTROLPRODUCTSNEMA & GeneralPurpose ControlHeavy Duty StartersFeatures and BenefitsStandard FeaturesSize 00–4 magnetic starters include thefollowing standard features:▪ Rugged Industrial Design▪ Half Sizes for Cost and Space Savings▪ Dual Voltage, Dual Frequency Coils▪ Solid State or Ambient CompensatedBimetal Overload Protection▪ Wide Range of Accessories▪ Easy Coil Access▪ Overload Test Feature▪ Straight Thru Wiring▪ Gravity Dropout▪ Large Silver Cadmium ContactsApplicationHeavy Duty starters are designed foracross the line starting of single phaseand polyphase motors.These controls are available in NEMASizes 00 through 8. In addition to theusual NEMA Starter Sizes, Siemensoffers three exclusive Half Sizes; 1 3 ⁄4,2 1 ⁄2 and 3 1 ⁄2. These integral sizes offerthe same rugged, industrialconstruction as our NEMA Sizes andensure efficient operating performance.Half Sizes provide a real cost savingsby cutting down on over capacity whenNEMA Sizes exceed the motor ratings.All Siemens Heavy Duty controls,including our popular Half Sizes complywith applicable NEMA and UL tests.All starters are supplied with a NOholding interlock that in conjunctionwith an appropriate pilot device willprovide low voltage protection orrelease.NEMA starters are ideal forapplications requiring dependabilityand durability. Typical applicationsinclude use with machine tools, airconditioning equipment, materialhandling equipment, compressors,hoists and various production andindustrial equipment as well as indemanding automotive applications.Starters are available as an open typeor in NEMA 1, 12/3/3R, 4 (painted), 4/4X(stainless), 4X (fiberglass), and 7 & 9enclosures.Gravity DropoutFor added reliability, the gravity dropoutof the armature and contacts is assistedby stainless steel springs which helpprovide quick, precise opening of thecontacts.45 Degree, Wedge Action ContactsThe 45 degree, wedge action contactsreduce tracking and provide faster arcquenching. The resulting self-cleaningand reduced contact bounce meancooler operation and longer life for thelarge silver cadmium oxide contacts.Terminal DesignControl terminals are self-risingpressure type.Molded CoilMagnetic coils are carefully wound andthen sealed in epoxy. Encapsulationhelps seal out moisture, promotesheat transfer and resists electrical,mechanical and thermal stresses.Dual Voltage/Frequency CoilStarters are available with dual voltage,dual frequency coils. They are designedto operate on either 50 or 60 Hertz.Molded Stationary Contact BlockThermoset materials resist arc trackingand the stresses of heat and severeimpact.Field Modification KitsAll starters can be modified in the fieldwith a complete range of accessories.These include pushbuttons, selectorswitches, pilot lights, auxiliary contactsand surge suppressors.Auxiliary Equipment▪ NEMA starters are available withbuilt-in START-STOP push buttonsfor 3-wire control or aHAND-OFF-AUTO selectorswitch for 2-wire control▪ Field modifications such as auxiliarycontacts, pilot lights, push buttons,selector switches, and fuse blocksGeneralare available to meet particularapplication requirements▪ Normally opened or normally closedauxiliary power pole kits are availablefor Sizes 00 through 1 3 ⁄4▪ Transformers can be ordered as eitherfactory or field modifications.In some cases these may require alarger enclosure▪ A full line of replacement parts areavailable including contact kits, coils,and overload relaysPart No49D70084Siemens Sizes 00–1 3 ⁄4 have asstandard, universal mounting whichfits the following:Cutler Hammer—Citation Series—Freedom SeriesGE—300 LineSquare D —Type SThe Starter with its existingbackplate mounts onto the piggybackmounting plate and is secured inplace with three mounting screws.The piggyback mounting plate fitsthe following:Allen-Bradley —Bulletin 509—Bulletin 709Westinghouse —Series A200Size 5 & 6 StartersAdditional Features▪ Solid State Overload (3RB type)Standard▪ Latest technology in arc quenching toextend contactor life▪ Wide variety of enclosures in allstarter configurationsSize 7 & 8 StartersAdditional Features▪ New Compact Design▪ Can be mounted in any position▪ Same coil voltage is AC or DC16-12Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Heavy Duty StartersFeatures and BenefitsESP100 ® Solid State StarterESP100 ® starters combine the ruggedcharacteristics of a NEMA ratedcontactor with a solid state overloadthat provides phase loss protection.It offers the industrial user greaterprotection and added life for motors inheavy duty applications. The inherentbenefits of the ESP100 ® ultimatelyresult in a cost savings to the user.ESP100 ® Solid State Overload RelaysThese standard features of the ESP100 ®provide Extra Starter Performance.▪ True phase loss protection; tripswithin 3 seconds▪ High accuracy trip curves; ± 2%repeat trip accuracy▪ Ease of use. Mount, wire, and set FLA▪ Overload is self protected againstshort circuits▪ Overload is self powered and requiresno hard wiring or separate powersource▪ Heaterless construction minimizesenergy costs and the costs of cabinetventilation or cooling▪ Class 20 protection is standard. Class10 and 30 protection are available▪ Provides motor protection for50/60 HertzHalf Size StartersHalf-Size starters feature all therugged performance characteristics ofour NEMA rated starter sizes, but arefractionally sized to more closely matchyour exact motor rating. As a result,significant economic savings are madepossible without sacrificing the reliabilityyou expect from a heavy duty starter.These additional starter sizes have thereserve capacity to handle occasionalplugging and jogging applicationswithout derating. Superior operatingperformance in heavy duty applicationsis assured by the large current carryingparts, not by derating the device.Exclusive “half-sizes” save potentiallyhundreds, even thousands of dollarsper project.Using the table below, simply matchthe specific size starter to thehorsepower rating of your motor.Every half-size starter saves youmoney—up to 31%.All “half-sizes” comply to applicableNEMA and UL standards.SelectionESP100 ® FLA Adjustment Dial—Set theadjustment dial on the overload to theFLA of the motor.Figure 1Typical Solid-State OverloadAdjustment Dial MarkingsEach overload is precisely calibrated andlabels are individually laser printed andthen custom applied for each particularcalibration.Savings for Siemens “Half-Size” Starters in NEMA 1 Enclosures, FVNRMotor Size“Half-Size”Starter Half Savings Over230V 460V Size Size List Price $ Next Full Size7 1 ⁄2 10 1 — 393. —10 15 — 1 3 ⁄4 521. 31%15 25 2 — 737. —20 30 — 2 1 ⁄2 969. 20%30 50 3 — 1202. —40 75 — 3 1 ⁄2 2321. 13%50 100 4 — 2666. —16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlDiscount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-13

Heavy Duty Motor StartersSolid State Overload with Manual Reset, Class 14SelectionOrdering InformationCoil Table16CONTROLPRODUCTSNEMA & GeneralPurpose Control Replace the (*) with a letter from the coil table. Dual voltage coils are 60Hz VoltageLetterwired on high voltage unless specified on order.24 Separate Control J Field Modification Kits see pages 16-79.120 Separate Control F110–120/220–240 Factory Modifications see pages 16-94.A200–208 D Dimensions see pages 16-102 open and 16-115 enclosed.220–240 G277 LWiring Diagrams see page 16-130.220–240/440–480 C Replacement Parts see pages 16-155.440–480 H Shipped as standard Class 20. For Class 10 or Class 30 see page 16-96. 575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.Open Type & Standard Width Enclosure, 3-Phase, 3-PoleMax HpEnclosureOpen Type NEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9 NEMA 12Standard Auxiliary General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3 & 4 NEMA 3/3R 16-14Contacts Corrosion Resistant Corrosion Resistant304 Stainless SteelOverload200 230 460 575 NEMA Half Amp Catalog List Catalog List Catalog List Catalog List Catalog List Catalog ListVolts Volts Volts Volts Size Size Range Number Price $ Number Price $ Number Price $ Number Price $ Number Price $ Number Price $1⁄61⁄61⁄31⁄2 00 — 0.25–1 14BSA32A* 272.00 14BSA32B* 289.00 Use Size 0 — Use Size 0 — Use Size 0 — Use Size 0 —1⁄23⁄4 1 1 ⁄2 2 00 — 0.75–3 14BSB32A* 272.00 14BSB32B* 289.00 Use Size 0 — Use Size 0 — Use Size 0 — Use Size 0 —1 1 ⁄2 1 1 ⁄2 2 — 00 — 2.5–10 14BSD32A* 272.00 14BSD32B* 289.00 Use Size 0 — Use Size 0 — Use Size 0 — Use Size 0 —1⁄61⁄61⁄31⁄2 0 — 0.25–1 14CSA32A* 332.00 14CSA32B* 349.00 14CSA32W* 651.00 14CSA32F* 716.00 14CSA32H* 1434.00 14CSA320* 452.001⁄23⁄4 1 1 ⁄2 2 0 — 0.75–3 14CSB32A* 332.00 14CSB32B* 349.00 14CSB32W* 651.00 14CSB32F* 716.00 14CSB32H* 1434.00 14CSB320* 452.002 2 5 5 0 — 2.5–10 14CSD32A* 332.00 14CSD32B* 349.00 14CSD32W* 651.00 14CSD32F* 716.00 14CSD32H* 1434.00 14CSD320* 452.003 3 — — 0 — 9–18 14CSE32A* 332.00 14CSE32B* 349.00 14CSE32W* 651.00 14CSE32F* 716.00 14CSE32H* 1434.00 14CSE320* 452.001⁄61⁄61⁄31⁄2 1 — 0.25–1 14DSA32A* 375.00 14DSA32B* 393.00 14DSA32W* 702.00 14DSA32F* 773.00 14DSA32H* 1477.00 14DSA320* 496.001⁄23⁄4 1 1 ⁄2 2 1 — 0.75–3 14DSB32A* 375.00 14DSB32B* 393.00 14DSB32W* 702.00 14DSB32F* 773.00 14DSB32H* 1477.00 14DSB320* 496.002 2 5 5 1 — 2.5–10 14DSD32A* 375.00 14DSD32B* 393.00 14DSD32W* 702.00 14DSD32F* 773.00 14DSD32H* 1477.00 14DSD320* 496.003 3 10 10 1 — 9–18 14DSE32A* 375.00 14DSE32B* 393.00 14DSE32W* 702.00 14DSE32F* 773.00 14DSE32H* 1477.00 14DSE320* 496.007 1 ⁄2 7 1 ⁄2 — — 1 — 13–27 14DSF32A* 375.00 14DSF32B* 393.00 14DSF32W* 702.00 14DSF32F* 773.00 14DSF32H* 1477.00 14DSF320* 496.00— — 15 15 — 1 3 ⁄4 13–27 14ESF32A* 504.00 14ESF32B* 521.00 14ESF32W* 831.00 14ESF32F* 914.00 14ESF32H* 1606.00 14ESF320* 625.0010 10 — — — 1 3 ⁄4 20–40 14ESG32A* 504.00 14ESG32B* 521.00 14ESG32W* 831.00 14ESG32F* 914.00 14ESG32H* 1606.00 14ESG320* 625.00— — 15 20 2 — 13–27 14FSF32A* 651.00 14FSF32B* 737.00 14FSF32W* 1357.00 14FSF32F* 1492.00 14FSF32H* 2029.00 14FSF320* 926.0010 15 25 25 2 — 22–45 14FSH32A* 651.00 14FSH32B* 737.00 14FSH32W* 1357.00 14FSH32F* 1492.00 14FSH32H* 2029.00 14FSH320* 926.00— — 30 30 — 2 1 ⁄2 22–45 14GSH32A* 840.00 14GSH32B* 969.00 14GSH32W* 1719.00 14GSH32F* 1891.00 14GSH32H* 2528.00 14GSH320* 1176.0015 20 — — — 2 1 ⁄2 30–60 14GSJ32A* 840.00 14GSJ32B* 969.00 14GSJ32W* 1719.00 14GSJ32F* 1891.00 14GSJ32H* 2528.00 14GSJ320* 1176.00— — 30 40 3 — 30–60 14HSJ32A* 1030.00 14HSJ32B* 1202.00 14HSJ32W* 2081.00 14HSJ32F* 2289.00 14HSJ32H* 3627.00 14HSJ320* 1426.0025 30 50 50 3 — 45–90 14HSK32A* 1030.00 14HSK32B* 1202.00 14HSK32W* 2081.00 14HSK32F* 2289.00 14HSK32H* 3627.00 14HSK320* 1426.0030 40 75 75 — 3 1 ⁄2 57–115 14ISL32A* 1960.00 14ISL32B* 2322.00 14ISL32W* 3821.00 14ISL32F* 4203.00 14ISL32H* 4519.00 14ISL320* 3063.0040 50 100 100 4 — 67–135 14JTM32A* 2305.00 14JTM32B* 2666.00 14JTM32W* 4165.00 14JTM32F* 4582.00 14JTM32H* 4864.00 14JTM320* 3407.0075 100 200 200 5 — 55 - 250 14LPU32A* 5573.00 14LPU32B* 6238.00 14LPU32E* 8133.00 — — 14LPU32H* 11269.00 14LPU320* 8133.00150 200 400 400 6 — 160–540 14MPX32A* 13198.00 14MPX32B* 17507.00 14MPX32E* 21814.00 — — — — 14MPX320* 19832.00— 300 600 600 7 — 420–820 14NHY32A* 19547.00 14NHY32B* 23855.00 14NHY32E* 28162.00 — — — — 14NHY320* 26181.00— 450 900 900 8 — 420–1220 14PHZ32A* 29223.00 14PHZ32B* 33530.00 14PHZ32E* 37837.00 — — — — 14PHZ320* 35855.00Open Type & Standard Width Enclosure, Single Phase, 2-Pole Max HpEnclosure316 Stainless Steel(optional) Open Type NEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9 NEMA 12General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3 & 4 NEMA 3/3R Corrosion Resistant Corrosion Resistant Div 1 and Div 2 Industrial Use304 Stainless Steel Class I Groups C & D Weatherproof316 Stainless Steel(optional) Class II Groups E, F & GClass IIIBolted EnclosuresIndoor/Outdoor UseOverload115 208/230 NEMA Amp Catalog List Catalog List Catalog List Catalog List Catalog List Catalog ListVolts Volts Size Range Number Price $ Number Price $ Number Price $ Number Price $ Number Price $ Number Price $1⁄81⁄4 0 0.75–3 14CSB12A* 276.00 14CSB12B* 293.00 14CSB12W* 595.00 14CSB12F* 654.00 14CSB12H* 1379.00 14CSB120* 396.001⁄41⁄2 0 2.5–10 14CSD12A* 276.00 14CSD12B* 293.00 14CSD12W* 595.00 14CSD12F* 654.00 14CSD12H* 1379.00 14CSD120* 396.001 2 0 5.0–16 14CSE12A* 276.00 14CSE12B* 293.00 14CSE12W* 595.00 14CSE12F* 654.00 14CSE12H* 1379.00 14CSE120* 396.001⁄81⁄4 1 0.75–3 14DSB12A* 319.00 14DSB12B* 336.00 14DSB12W* 647.00 14DSB12F* 711.00 14DSB12H* 1422.00 14DSB120* 440.001⁄41⁄2 1 2.5–10 14DSD12A* 319.00 14DSD12B* 336.00 14DSD12W* 647.00 14DSD12F* 711.00 14DSD12H* 1422.00 14DSD120* 440.001 2 1 5.0–16 14DSE12A* 319.00 14DSE12B* 336.00 14DSE12W* 647.00 14DSE12F* 711.00 14DSE12H* 1422.00 14DSE120* 440.00Note: Hp’s shown above are based on the overload amp Dual voltage coils not available in size 5–8 starters.range for the FLA’s (per the National Electric Code) of For conduit hubs and conversion instructions, see pagetypical industrial motors. All starter sizes carry one16-87.maximum Hp rating. For higher Hp single phase Coils D, F, or G will be wired for incoming voltage. J coilmotors, use 3-phase starters, wire and set perwill be wired for separate source. Coils E, H, and L dodiagram on page 16-130.not apply to single phase starters. Enclosure is NEMA Type 4 (painted steel).Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiv 1 and Div 2 Industrial UseClass I Groups C & DClass II Groups E, F & G WeatherproofClass IIIBolted EnclosuresIndoor/Outdoor Use F coil 100-250V AC 50/60Hz, or DC,H coil 150-500V AC 50/60Hz, or DC Only available F coil100-250V AC 50/60Hz, or DC Standard Auxiliary Contacts, Same as Contactors,refer to page 16-44. For 316 Stainless Steel option see page 16-98.Discount Schedule NEMA

Heavy Duty Motor StartersSolid State Overload with Manual Reset, Class 14SelectionOrdering InformationCoil TableNEMA 1 Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-115. Wiring Diagrams see page 16-130. Replacement Parts see page 16-155.60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.Extra Wide Enclosure, 3-Phase, 3-Pole Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 7 & 9 NEMA 12General Purpose Watertight, Dust-tight NEMA 3 & 4 NEMA 3/3R Corrosion Resistant Div 1 and Div 2 Industrial Use304 Stainless Steel Class I Groups C & D WeatherproofClass II Groups E, F & G, Class IIIBolted EnclosuresIndoor/Outdoor UseOverload200 230 460 575 NEMA Half AmpVolts Volts Volts Volts Size Size Range Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $1⁄61⁄61⁄31⁄2 00 — 0.25–1 14BSA82B* 506.00 Use Size 0 — — — Use Size 0 —1⁄23⁄4 1 1 ⁄2 2 00 — 0.75–3 14BSB82B* 506.00 Use Size 0 — — — Use Size 0 —1 1 ⁄2 1 1 ⁄2 2 — 00 — 2.5–10 14BSD82B* 506.00 Use Size 0 — — — Use Size 0 —1⁄61⁄61⁄31⁄2 0 — 0.25–1 14CSA82B* 567.00 14CSA82W* 961.00 14CSA82H* 2196.00 14CSA820* 625.001⁄23⁄4 1 1 ⁄2 2 0 — 0.75–3 14CSB82B* 567.00 14CSB82W* 961.00 14CSB82H* 2196.00 14CSB820* 625.002 2 5 5 0 — 2.5–10 14CSD82B* 567.00 14CSD82W* 961.00 14CSD82H* 2196.00 14CSD820* 625.003 3 — — 0 — 9–18 14CSE82B* 567.00 14CSE82W* 961.00 14CSE82H* 2196.00 14CSE820* 625.001⁄61⁄61⁄31⁄2 1 — 0.25–1 14DSA82B* 609.00 14DSA82W* 1064.00 14DSA82H* 2264.00 14DSA820* 668.001⁄23⁄4 1 1 ⁄2 2 1 — 0.75–3 14DSB82B* 609.00 14DSB82W* 1064.00 14DSB82H* 2264.00 14DSB820* 668.002 2 5 5 1 — 2.5–10 14DSD82B* 609.00 14DSD82W* 1064.00 14DSD82H* 2264.00 14DSD820* 668.003 3 10 10 1 — 9–18 14DSE82B* 609.00 14DSE82W* 1064.00 14DSE82H* 2264.00 14DSE820* 668.007 1 ⁄2 7 1 ⁄2 — — 1 — 13–27 14DSF82B* 609.00 14DSF82W* 1064.00 14DSF82H* 2264.00 14DSF820* 668.00— — 15 15 — 1 3 ⁄4 13–27 14ESF82B* 739.00 14ESF82W* 1193.00 14ESF82H* 2393.00 14ESF820* 797.0010 10 — — — 1 3 ⁄4 20–40 14ESG82B* 739.00 14ESG82W* 1193.00 14ESG82H* 2393.00 14ESG820* 797.00— — 15 20 2 — 13–27 14FSF82B* 885.00 14FSF82W* 1951.00 14FSF82H* 3479.00 14FSF820* 1254.0010 15 25 25 2 — 22–45 14FSH82B* 885.00 14FSH82W* 1951.00 14FSH82H* 3479.00 14FSH820* 1254.00— — 30 30 — 2 1 ⁄2 22–45 14GSH82B* 1074.00 14GSH82W* 2140.00 14GSH82H* 4314.00 14GSH820* 1443.0015 20 — — — 2 1 ⁄2 30–60 14GSJ82B* 1074.00 14GSJ82W* 2140.00 14GSJ82H* 4314.00 14GSJ820* 1443.00— — 30 40 3 — 30–60 14HSJ82B* 1391.00 14HSJ82W* 3821.00 14HSJ82H* 5483.00 14HSJ820* 2356.0025 30 50 50 3 — 45–90 14HSK82B* 1391.00 14HSK82W* 3821.00 14HSK82H* 5483.00 14HSK820* 2356.0030 40 75 75 — 3 1 ⁄2 57–115 14ISL82B* 2409.00 14ISL82W* 4751.00 14ISL82H* 9048.00 14ISL820* 3286.0040 50 100 100 4 — 67–135 14JTM82B* 2752.00 14JTM82W* 5096.00 14JTM82H* 9368.00 14JTM820* 3631.0016 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating. For higher Hp singlephase motors, use 3-phase starters, wire and setper diagram on page 16-130. To receive a single phase starter in an extra wideenclosure, order the enclosure kit from pg 16-96 andthe open style starter from page 16-14 or 16-16 asseparate items. For conduit hubs and conversion instructions, seepage 16-87. For 316 Stainless Steel option see page 16-97.Discount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-15

Heavy Duty Motor StartersAmbient Compensated Bimetal Overload with Manual and Auto Reset, Class 14SelectionOrdering InformationCoil Table16CONTROLPRODUCTSNEMA & GeneralPurpose Control Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Heater elements see page 16-148. Single phase starters require 1 heaterelement. 3-phase starters require 3 heater elements. Field Modification Kits page 16-79. Factory Modifications page 16-94. Dimensions see page 16-103 open and 16-115 enclosed. Wiring Diagrams see page 16-130. Replacement Parts see page 16-155.60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.Open Type & Standard Width Enclosure, 3-Phase, 3-PoleMax HpEnclosureOpen Type NEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9 NEMA 12Standard Auxiliary General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3 & 4 NEMA 3/3R Contacts Corrosion Resistant Corrosion Resistant Div 1 and Div 2 Industrial Use304 Stainless Steel Class I Groups C & D WeatherproofClass II Groups E, F & GCont-Class IIIactorBolted Enclosures200 230 460 575 Amp NEMA Half Indoor/Outdoor UseVolts Volts Volts Volts Rating Size Size Catalog No Price $ Catalog No Price $ Catalog No Price $ Catalog No Price $ Catalog No Price $ Catalog No Price $1 1 ⁄2 1 1 ⁄2 2 2 9 00 — 14BP32A*81 233.00 14BP32B*81 249.00 Use Size 0 — Use Size 0 — Use Size 0 — Use Size 0 —3 3 5 5 18 0 — 14CP32A*81 293.00 14CP32B*81 310.00 14CP32W*81 612.00 14CP32F*81 673.00 14CP32H*81 1395.00 14CP320*81 414.007 1 ⁄2 7 1 ⁄2 10 10 27 1 — 14DP32A*81 336.00 14DP32B*81 354.00 14DP32W*81 664.00 14DP32F*81 729.00 14DP32H*81 1440.00 14DP320*81 457.0010 10 15 15 40 — 1 3 ⁄4 14EP32A*81 465.00 14EP32B*81 482.00 14EP32W*81 793.00 14EP32F*81 873.00 14EP32H*81 1568.00 14EP320*81 586.0010 15 25 25 45 2 — 14FP32A*81 612.00 14FP32B*81 698.00 14FP32W*81 1319.00 14FP32F*81 1450.00 14FP32H*81 1991.00 14FP320*81 888.0015 20 30 30 60 — 2 1 ⁄2 14GP32A*81 801.00 14GP32B*81 930.00 14GP32W*81 1680.00 14GP32F*81 1847.00 14GP32H*81 2490.00 14GP320*81 1137.0025 30 50 50 90 3 — 14HP32A*81 991.00 14HP32B*81 1163.00 14HP32W*81 2042.00 14HP32F*81 2247.00 14HP32H*81 3589.00 14HP320*81 1387.0030 40 75 75 115 — 3 1 ⁄2 14IP32A*81 1922.00 14IP32B*81 2284.00 14IP32W*81 3782.00 14IP32F*81 4160.00 14IP32H*81 4479.00 14IP320*81 3024.0040 50 100 100 135 4 — 14JG32A*81 2266.00 14JG32B*81 2628.00 14JG32W*81 4126.00 14JG32F*81 4539.00 14JG32H*81 4824.00 14JG320*81 3368.00Open Type & Standard Width Enclosure, Single Phase, 2-Pole Max HpEnclosureOpen Type NEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9 NEMA 12General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3 & 4 NEMA 3/3R Corrosion Resistant Corrosion Resistant Div 1 and Div 2 Industrial Use304 Stainless Steel Class I Groups C & DClass II Groups E, F & GWeatherproofClass IIIContactorBolted Enclosures115 208/230 Amp NEMA HalfIndoor/Outdoor UseVolts Volts Rating Size Size Catalog No Price $ Catalog No Price $ Catalog No Price $ Catalog No Price $ Catalog No Price $ Catalog No Price $1⁄3 1 9 00 — 14BP12A*81 203.00 14BP12B*81 219.00 Use Size 0 — Use Size 0 — Use Size 0 — Use Size 0 —1 2 18 0 — 14CP12A*81 262.00 14CP12B*81 279.00 14CP12W*81 582.00 14CP12F*81 639.00 14CP12H*81 1365.00 14CP120*81 383.002 3 27 1 — 14DP12A*81 306.00 14DP12B*81 323.00 14DP12W*81 633.00 14DP12F*81 696.00 14DP12H*81 1409.00 14DP120*81 426.003 5 35 1P — 14EP12A*81 400.00 14EP12B*81 418.00 14EP12W*81 728.00 14EP12F*81 801.00 14EP12H*81 1503.00 14EP120*81 521.003 7 1 ⁄2 45 2 — 14FP12A*81 555.00 14FP12B*81 418.00 14FP12W*81 1262.00 14FP12F*81 1389.00 14FP12H*81 1934.00 14FP120*81 831.005 10 60 — 2 1 ⁄2 14GP12A*81 754.00 14GP12B*81 875.00 14GP12W*81 1623.00 14GP12F*81 1786.00 14GP12H*81 2442.00 14GP120*81 1090.00Extra Wide Enclosure, 3-Phase, 3-Pole Max HpNote: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All Starter Sizes carryone maximum Hp rating. For higher Hp singlephase motors, use 3-phase starters, wire and setper diagram on page 16-130.EnclosureNEMA 1 NEMA 4/4X Stainless NEMA 7 & 9 NEMA 12General Purpose Watertight, Dust-tight NEMA 3 & 4 NEMA 3/3R Corrosion Resistant Div 1 and Div 2 Industrial Use To receive a single phase starter in an extra wideenclosure, order the enclosure kit from pg 16-90 andthe open style starter from pg 16-14 or 16-16 asseparate items. For conduit hubs and conversion instructions, seepage 16-87.304 Stainless Steel Class II Groups E, F & G WeatherproofClass IIIBolted EnclosuresIndoor/Outdoor UseContactor200 230 460 575 Amp NEMA HalfVolts Volts Volts Volts Rating Size Size Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $1 1 ⁄2 1 1 ⁄2 2 2 9 00 — 14BP82B*81 467.00 Use Size 0 — Use Size 0 — Use Size 0 —3 3 5 5 18 0 — 14CP82B*81 528.00 14CP82W*81 982.00 14CP82H*81 2156.00 14CP820*81 586.007 1 ⁄2 7 1 ⁄2 10 10 27 1 — 14DP82B*81 570.00 14DP82W*81 1025.00 14DP82H*81 2224.00 14DP820*81 629.0010 10 15 15 40 — 1 3 ⁄4 14EP82B*81 700.00 14EP82W*81 1154.00 14EP82H*81 2355.00 14EP820*81 758.0010 15 25 25 45 2 — 14FP82B*81 846.00 14FP82W*81 1912.00 14FP82H*81 3440.00 14FP820*81 1215.0015 20 30 30 60 — 2 1 ⁄2 14GP82B*81 1035.00 14GP82W*81 2101.00 14GP82H*81 4275.00 14GP820*81 1404.0025 30 50 50 90 3 — 14HP82B*81 1352.00 14HP82W*81 3782.00 14HP82H*81 5443.00 14HP820*81 2317.0030 40 75 75 115 — 3 1 ⁄2 14IP82B*81 2284.00 14IP82W*81 4712.00 14IP82H*81 8899.00 14IP820*81 3248.0040 50 100 100 135 4 — 14JG82B*81 2628.00 14JG82W*81 5057.00 14JG82H*81 9244.00 14JG820*81 3592.00 Coils D, F, or G will be wired for incoming voltage.S coil will be wired for separate source. Coils E, H,and L do not apply to single phase starters. Standard Auxiliary Contacts, Same as Contactors,refer to page 16-44. For 316 Stainless Steel option see page 16-97.16-16Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Combination Heavy Duty StartersFeatures and BenefitsCombination StarterFeaturesCombination starters includethe following features:▪ Manufactured with Cold Forming“TOX” Process▪ Solid State Overloads Standard onSizes 5–8▪ Easy to Install▪ Wide Range of Enclosure TypesAvailable▪ Heavy Duty Quarter Turns▪ 100kA Short Circuit Current Ratingwhen Protected with Class R Fusesto 600V or MCP to 480V▪ Visible Blade Disconnect▪ Industrial Type Disconnect HandleApplicationA combination starter meets NationalElectrical Code requirements for:1. A means of providing short circuitmotor protection with fused or breakerdisconnection of line voltage.2. A means of safeguarding personnelfrom contact with live parts and fromaccidental starting of machinery bydisconnecting the motor and thecontroller.3. A motor controller with overloadprotection.Prewired combination starters eliminatethe cost of wiring between separatedisconnect and starter. Factory testingassures field performance. Combinationstarters also provide a more compactand attractive installation than separateunits.Enclosure TypesCombination starters are available inNEMA 1, 12/3/3R/4 (painted), 4/4X(stainless), 4X fiberglass and 7 & 9enclosures. Enclosures protectpersonnel from contact with live partsand depending upon the construction,protect the control in varying degreesfrom physical damage and harmfulatmospheres. All enclosures aresupplied with corrosion resistantfinishes.New Heavy Duty Disconnect SwitchesThe disconnect switch that goes thedistance in durability, performance andreliability has been made even better togive you greater advantages:▪ Visible blades for the highest levelof safety▪ Double break switching action toreduce arcing, increase lifetime andeliminate the “electric hinge”▪ More rugged positive action switch▪ Oversized lugs are standard▪ Line side shield to help guardpersonnel from contact with live parts▪ Higher horsepower rating fordesign E high efficiency motors▪ Now UL listed for IIsco, Burndy andT&B crimp type lugs▪ The 200A switch now accepts up to300 MCM versus 250 MCM wire sizeIts rugged construction - with a highfault withstand rating of 100kA at 600VAC when fused with class R ratedfuses - meets the most stringentindustry standards set forth by theautomotive, petro-chemical, and pulpand paper industries. UL recognized andCSA certified, our disconnect switchesare available either non-fusible or fusiblewith class R and class J fuse clips.Enclosure Kits for NEMACombination Starters DescriptionNow you can assemble a non-stockedcombination starter per your unanticipatedneeds in minutes. Say, forexample, your customer needs a fusiblecombination starter that you don’t havein stock. You need in now, but don’tsweat it. Simply start with the newlyoffered enclosure kit which has theGeneralhandle preinstalled. You install therequired starter and fusible disconnect,connect the power wire and you arefinished. Within minutes, you have therequired combination starter in yourhands. No more waiting on the factory.You need it, your got it!What Is In It For You!▪ Reduce Lead-time - What used totake days to get now takes minutes▪ Reduced Inventory - Instead ofstocking scores of various combinationstarters, simply stock a fewenclosure kits, disconnect kits, circuitbreaker kits and open starters. Withthese basic “building blocks” youvirtually have hundreds of productson-hand▪ Quality - The same high level ofquality you have been accustomedto with our products will also befound in these new enclosure kits▪ UL Listed - By correctly followingthe instructions included with the kits,the product you build isUL/CSA ListedRefer to page 16-90 for more details.Siemens Type ETI Circuit BreakerThe ETI circuit breaker is a devicedesigned specifically for applicationin motor circuits. The ETI is a magneticonly protective device designed toprovide protection against shortcircuit current.The instantaneous-only type ETI circuitbreaker employs adjustable magnetictrip settings to allow broader applicationranges and a higher degree of motorshort circuit protection.Heavy Duty StartersThese combination starters use thesame starters described in the heavyduty starter section of this catalog.ESP 100 solid state overload startersand ambient compensated bimetaloverload starters are available.16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-17

Combination Heavy Duty StartersNon-Fusible with Solid State Overload, Class 17SelectionOrdering Information Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. For Fusible Styles see page 16-21. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-117. Wiring Diagrams see page 16-131. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.16CONTROLPRODUCTSNEMA & GeneralPurpose ControlStandard Width Enclosure, 3 Phase, 3-PoleMax HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R, General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 Painted (thru Sz 4)Corrosion Resistant Corrosion Resistant Industrial UseOverload Disc 304 Stainless Steel Weatherproof200 230 460 575 NEMA Half Amp Amp 316 Stainless Steel (optional) Watertight, Dust-tightVolts Volts Volts Volts Size Size Range Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $1⁄61⁄6 1⁄3 1⁄2 0 — 0.25–1 30 17CSA92B* 823.00 17CSA92W* 1650.00 17CSA92F* 1814.00 17CSA92N* 1030.001⁄23⁄4 1 1 ⁄2 2 0 — 0.75–3 30 17CSB92B* 823.00 17CSB92W* 1650.00 17CSB92F* 1814.00 17CSB92N* 1030.002 2 5 5 0 — 2.5–10 30 17CSD92B* 823.00 17CSD92W* 1650.00 17CSD92F* 1814.00 17CSD92N* 1030.003 3 — — 0 — 9–18 30 17CSE92B* 823.00 17CSE92W* 1650.00 17CSE92F* 1814.00 17CSE92N* 1030.001⁄61⁄6 1⁄3 1⁄2 1 — 0.25–1 30 17DSA92B* 865.00 17DSA92W* 1693.00 17DSA92F* 1863.00 17DSA92N* 1072.001⁄23⁄4 1 1 ⁄2 2 1 — 0.75–3 30 17DSB92B* 865.00 17DSB92W* 1693.00 17DSB92F* 1863.00 17DSB92N* 1072.002 2 5 5 1 — 2.5–10 30 17DSD92B* 865.00 17DSD92W* 1693.00 17DSD92F* 1863.00 17DSD92N* 1072.003 3 10 10 1 — 9–18 30 17DSE92B* 865.00 17DSE92W* 1693.00 17DSE92F* 1863.00 17DSE92N* 1072.007 1 ⁄2 7 1 ⁄2 — — 1 — 13–27 60 17DSF92B* 865.00 17DSF92W* 1693.00 17DSF92F* 1863.00 17DSF92N* 1072.00— — 15 15 — 1 3 ⁄4 13–27 60 17ESF92B* 995.00 17ESF92W* 1822.00 17ESF92F* 2003.00 17ESF92N* 1202.0010 10 — — — 1 3 ⁄4 20–40 60 17ESG92B* 995.00 17ESG92W* 1822.00 17ESG92F* 2003.00 17ESG92N* 1202.00— — 15 20 2 — 13–27 60 17FSF92B* 1348.00 17FSF92W* 2623.00 17FSF92F* 2886.00 17FSF92N* 1641.0010 15 25 25 2 — 22–45 60 17FSH92B* 1348.00 17FSH92W* 2623.00 17FSH92F* 2886.00 17FSH92N* 1641.00— — 30 30 — 2 1 ⁄2 22–45 100 17GSH92B* 1822.00 17GSH92W* 4045.00 17GSH92F* 4450.00 17GSH92N* 2201.0015 20 — — — 2 1 ⁄2 30–60 100 17GSJ92B* 1822.00 17GSJ92W* 4045.00 17GSJ92F* 4450.00 17GSJ92N* 2201.00— — 30 40 3 — 30–60 100 17HSJ92B* 2219.00 17HSJ92W* 4440.00 17HSJ92F* 4886.00 17HSJ92N* 2598.0020 25 50 50 3 — 45–90 100 17HSK92B* 2219.00 17HSK92W* 4440.00 17HSK92F* 4886.00 17HSK92N* 2598.0030 40 75 75 — 3 1 ⁄2 57–115 200 17ISL92B* 3899.00 17ISL92W* 6741.00 17ISL92F* 7415.00 17ISL92N* 4950.0040 50 100 100 4 — 67–135 200 17JTM92B* 4243.00 17JTM92W* 7086.00 17JTM92F* 7795.00 17JTM92N* 5294.0075 100 200 200 5 — 55–250 400 17LPU92B* 9476.00 17LPU92E* 16730.00 — — 17LPU92N* 11949.00150 200 400 400 6 — 160–540 800 17MPX92B* 24941.00 17MPX92E* 32694.00 — — 17MPX92N* 27912.00— 300 600 600 7 — 420–820 1200 17NHY92B* 31118.00 — — — — 17NHY92N* 33444.00— 450 900 900 8 — 420–1220 1600 17PHZ92B* 41812.00 — — — — 17PHZ92N* 44139.00Standard Width Enclosure, Single Phase, (Catalog Numbers are three phase, wire for single phase in the field)Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R, General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedCorrosion Resistant Corrosion Resistant Industrial Use304 Stainless Steel Weatherproof208/ Overload Disc 316 Stainless Steel (optional) Watertight, Dust-tight115 230 NEMA Amp AmpVolts Volts Size Range Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $1⁄8 1⁄4 0 0.75–3 30 17CSB92B* 823.00 17CSB92W* 1650.00 17CSB92F* 1814.00 17CSB92N* 1030.001⁄4 1⁄2 0 2.5–10 30 17CSD92B* 823.00 17CSD92W* 1650.00 17CSD92F* 1814.00 17CSD92N* 1030.001 2 0 9–18 30 17CSE92B* 823.00 17CSE92W* 1650.00 17CSE92F* 1814.00 17CSE92N* 1030.001⁄8 1⁄4 1 0.75–3 30 17DSB92B* 865.00 17DSB92W* 1693.00 17DSB92F* 1863.00 17DSB92N* 1072.001⁄4 1⁄2 1 2.5–10 30 17DSD92B* 865.00 17DSD92W* 1693.00 17DSD92F* 1863.00 17DSD92N* 1072.001 2 1 9–18 30 17DSE92B* 865.00 17DSE92W* 1693.00 17DSE92F* 1863.00 17DSE92N* 1072.00Note: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating. Dual voltage coils not available in modified starters orin starter sizes 5–8. For conduit hubs and conversion instructions, see page16-87. For 60A disconnect, order fusible cat. no. page 16-21. For 25 HP and 200A disconnect, order fusible cat. no.page 16-21. For 30HP and 200A disconnect, order fusible cat. no.page 16-21. For 600A disconnect, order fusible cat. no. page 16-21. Enclosure is NEMA Type 4 (painted steel). For a single phase motor, multiply the motornameplate by 0.75 and set the OL dial to theresulting value. F coil 100-250V AC 50/60Hz, or DC,H coil 150-500V AC 50/60Hz, or DC Only availableF coil 100-250V AC 50/60Hz, or DC For 316 Stainless Steel option see page 16-97.16-18Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Combination Heavy Duty StartersNon-Fusible with Solid State Overload, Class 17SelectionOrdering Information Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. For Fusible Styles see page 16-21. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-117. Wiring Diagrams see page 16-131. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.Extra Wide Enclosure, 3-Phase, 3-PoleMax HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 12, NEMA 3/3R, General Purpose Watertight, Dust-tight NEMA 4 PaintedCorrosion ResistantIndustrial UseOverload Disc 304 Stainless Steel Weatherproof200 230 460 575 NEMA Half Amp Amp 316 Stainless Steel (optional) Watertight, Dust-tightVolts Volts Volts Volts Size Size Range Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $1⁄61⁄61⁄31⁄2 0 — 0.25–1 30 17CSA82B* 1037.00 17CSA82W* 2295.00 17CSA82N* 1416.001⁄23⁄4 1 1 ⁄2 2 0 — 0.75–3 30 17CSB82B* 1037.00 17CSB82W* 2295.00 17CSB82N* 1416.002 2 5 5 0 — 2.5–10 30 17CSD82B* 1037.00 17CSD82W* 2295.00 17CSD82N* 1416.003 3 — — 0 — 9–18 30 17CSE82B* 1037.00 17CSE82W* 2295.00 17CSE82N* 1416.001⁄61⁄61⁄31⁄2 1 — 0.25–1 30 17DSA82B* 1082.00 17DSA82W* 2339.00 17DSA82N* 1461.001⁄23⁄4 1 1 ⁄2 2 1 — 0.75–3 30 17DSB82B* 1082.00 17DSB82W* 2339.00 17DSB82N* 1461.002 2 5 5 1 — 2.5–10 30 17DSD82B* 1082.00 17DSD82W* 2339.00 17DSD82N* 1461.003 3 10 10 1 — 9–18 30 17DSE82B* 1082.00 17DSE82W* 2339.00 17DSE82N* 1461.007 1 ⁄2 7 1 ⁄2 — — 1 — 13–27 60 17DSF82B* 1082.00 17DSF82W* 2339.00 17DSF82N* 1461.00— — 15 15 — 1 3 ⁄4 13–27 60 17ESF82B* 1210.00 17ESF82W* 2468.00 17ESF82N* 1589.0010 10 — — — 1 3 ⁄4 20–40 60 17ESG82B* 1210.00 17ESG82W* 2468.00 17ESG82N* 1589.00— — 15 20 2 — 13–27 60 17FSF82B* 1563.00 17FSF82W* 3270.00 17FSF82N* 2029.0010 15 25 25 2 — 22–45 60 17FSH82B* 1563.00 17FSH82W* 3270.00 17FSH82N* 2029.00— — 30 30 — 2 1 ⁄2 22–45 100 17GSH82B* 2253.00 17GSH82W* 5337.00 17GSH82N* 2977.0015 20 — — — 2 1 ⁄2 30–60 100 17GSJ82B* 2253.00 17GSJ82W* 5337.00 17GSJ82N* 2977.00— — 30 40 3 — 30–60 100 17HSJ82B* 2649.00 17HSJ82W* 5733.00 17HSJ82N* 3373.0020 20 50 50 3 — 45–90 100 17HSK82B* 2649.00 17HSK82W* 5733.00 17HSK82N* 3373.0016 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone Hp rating. Dual voltage coils not available in modified starters. For conduit hubs and conversion instructions, see page16-87. For 60A disconnect, order fusible cat. no. page 16-22. For 25 HP and 200A disconnect, order fusible cat. no.page 16-22. For 30HP and 200A disconnect, order fusible cat. no.page 16-22. For 316 Stainless Steel option see page 16-97.Discount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-19

Combination Heavy Duty StartersNon-Fusible with Ambient Compensated Bimetal Overload, Class 17SelectionOrdering Information Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Heater elements see page 16-148. (3 required) Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-117. Wiring Diagrams see page 16-131. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.Standard Width Enclosure, 3-Phase, 3-PoleMax HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R, General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedCorrosion Resistant Corrosion Resistant Industrial UseContactor Disc 304 Stainless Steel Weatherproof200 230 460 575 Amp NEMA Half Amp 316 Stainless Steel (optional) Watertight, Dust-tightVolts Volts Volts Volts Rating Size Size Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $3 3 5 5 18 0 — 30 17CP92B*81 784.00 17CP92W*81 1612.00 17CP92F*81 1773.00 17CP92N*81 991.007 1 ⁄2 7 1 ⁄2 10 10 27 1 — 30 17DP92B*81 827.00 17DP92W*81 1654.00 17DP92F*81 1820.00 17DP92N*81 1033.0010 10 15 15 40 — 1 3 ⁄4 60 17EP92B*81 957.00 17EP92W*81 1784.00 17EP92F*81 1962.00 17EP92N*81 1163.0010 15 25 25 45 2 — 60 17FP92B*81 1309.00 17FP92W*81 2584.00 17FP92F*81 2743.00 17FP92N*81 1602.0015 20 30 30 60 — 2 1 ⁄2 100 17GP92B*81 1784.00 17GP92W*81 4006.00 17GP92F*81 4407.00 17GP92N*81 2163.0025 30 50 50 90 3 — 100 17HP92B*81 2180.00 17HP92W*81 4403.00 17HP92F*81 4844.00 17HP92N*81 2559.0030 40 75 75 115 — 3 1 ⁄2 200 17IP92B*81 3859.00 17IP92W*81 6703.00 17IP92F*81 7374.00 17IP92N*81 4910.0040 50 100 100 135 4 — 200 17JP92B*81 4204.00 17JP92W*81 7048.00 17JP92F*81 7753.00 17JP92N*81 5254.0016CONTROLPRODUCTSNEMA & GeneralPurpose ControlExtra Wide Enclosure, 3-Phase, 3-PoleMax HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 12, NEMA 3/3R, General Purpose Watertight, Dust-tight NEMA 4 PaintedCorrosion ResistantIndustrial UseContactor Disc 304 Stainless Steel Weatherproof200 230 460 575 Amp NEMA Half Amp 316 Stainless Steel (optional) Watertight, Dust-tightVolts Volts Volts Volts Rating Size Size Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $3 3 5 5 18 0 — 30 17CP82B*81 1000.00 17CP82W*81 2256.00 17CP82N*81 1379.007 1 ⁄2 7 1 ⁄2 10 10 27 1 — 30 17DP82B*81 1043.00 17DP82W*81 2301.00 17DP82N*81 1422.0010 10 15 15 40 — 1 3 ⁄4 60 17EP82B*81 1172.00 17EP82W*81 2430.00 17EP82N*81 1551.0010 15 25 25 45 2 — 60 17FP82B*81 1526.00 17FP82W*81 3231.00 17FP82N*81 1991.0015 20 30 30 60 — 2 1 ⁄2 100 17GP82B*81 2214.00 17GP82W*81 5298.00 17GP82N*81 2938.0025 30 50 50 90 3 — 100 17HP82B*81 2610.00 17HP82W*81 5694.00 17HP82N*81 3334.00Standard Width Enclosure, Single Phase, (Catalog Numbers are three phase, wire for single phase in the field)Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R, General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedCorrosion Resistant Corrosion Resistant Industrial Use304 Stainless Steel Weatherproof208/ Contactor Disc 316 Stainless Steel (optional) Watertight, Dust-tight115 230 Amp NEMA Half AmpVolts Volts Rating Size Size Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $1 2 18 0 — 30 17CP92B*81 784.00 17CP92W*81 1612.00 17CP92F*81 1773.00 17CP92N*81 991.002 3 27 1 — 30 17DP92B*81 827.00 17DP92W*81 1654.00 17DP92F*81 1820.00 17DP92N*81 1033.003 5 35 1P — 60 17EP92B*81 957.00 17EP92W*81 1784.00 17EP92F*81 1962.00 17EP92N*81 1163.003 7 1 ⁄2 45 2 — 60 17FP92B*81 1309.00 17FP92W*81 2584.00 17FP92F*81 2743.00 17FP92N*81 1602.005 10 60 — 2 1 ⁄2 100 17GP92B*81 1784.00 17GP92W*81 4006.00 17GP92F*81 4407.00 17GP92N*81 2163.00Note: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating. Dual voltage coils not available in modified starters. For conduit hubs and conversion instructions, see page16-87. For 60A disc, order fusible cat. no. page 16-23. For 200A disc, order fusible cat. no. page 16-23. For 316 Stainless Steel option see page 16-97.16-20Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Combination Heavy Duty StartersFusible with Solid State Overload, Class 17SelectionOrdering Information Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-117. Wiring Diagrams see page 16-131. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.Standard Width Enclosure, 3-Phase, 3-Pole Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R, General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 Painted (thru Sz 4)Corrosion Resistant Corrosion Resistant Industrial Use304 Stainless Steel WeatherproofOverload Disc Fuse Clip 316 Stainless Steel (optional) Watertight, Dust-tight200 230 460 575 NEMA Half Amp Amp Size Catalog List Catalog List Catalog List Catalog ListVolts Volts Volts Volts Size Size Range Rating Amps/Volts Number Price $ Number Price $ Number Price $ Number Price $1⁄6 1⁄6 — — 0 — 0.25–1 30 30A/250V 17CSA92B*10 848.00 17CSA92W*10 1675.00 17CSA92F*10 1843.00 17CSA92N*10 1055.00— — 1 ⁄3 1⁄2 0 — 0.25–1 30 30A/600V 17CSA92B*11 866.00 17CSA92W*11 1693.00 17CSA92F*11 1863.00 17CSA92N*11 1073.001⁄2 3⁄4 — — 0 — 0.75–3 30 30A/250V 17CSB92B*10 848.00 17CSB92W*10 1675.00 17CSB92F*10 1843.00 17CSB92N*10 1055.00— — 1 1 ⁄2 2 0 — 0.75–3 30 30A/600V 17CSB92B*11 866.00 17CSB92W*11 1693.00 17CSB92F*11 1863.00 17CSB92N*11 1073.002 2 — — 0 — 2.5–10 30 30A/250V 17CSD92B*10 848.00 17CSD92W*10 1675.00 17CSD92F*10 1843.00 17CSD92N*10 1055.00— — 5 5 0 — 2.5–10 30 30A/600V 17CSD92B*11 866.00 17CSD92W*11 1693.00 17CSD92F*11 1863.00 17CSD92N*11 1073.003 3 — — 0 — 9–18 30 30A/250V 17CSE92B*10 848.00 17CSE92W*10 1675.00 17CSE92F*10 1843.00 17CSE92N*10 1055.001⁄6 1⁄6 — — 1 — 0.25–1 30 30A/250V 17DSA92B*10 891.00 17DSA92W*10 1719.00 17DSA92F*10 1891.00 17DSA92N*10 1098.00— — 1 ⁄3 1⁄2 1 — 0.25–1 30 30A/600V 17DSA92B*11 909.00 17DSA92W*11 1737.00 17DSA92F*11 1911.00 17DSA92N*11 1116.001⁄2 3⁄4 — — 1 — 0.75–3 30 30A/250V 17DSB92B*10 891.00 17DSB92W*10 1719.00 17DSB92F*10 1891.00 17DSB92N*10 1098.00— — 1 1 ⁄2 2 1 — 0.75–3 30 30A/600V 17DSB92B*11 909.00 17DSB92W*11 1737.00 17DSB92F*11 1911.00 17DSB92N*11 1116.002 2 — — 1 — 2.5–10 30 30A/250V 17DSD92B*10 891.00 17DSD92W*10 1719.00 17DSD92F*10 1891.00 17DSD92N*10 1098.00— — 5 5 1 — 2.5–10 30 30A/600V 17DSD92B*11 909.00 17DSD92W*11 1737.00 17DSD92F*11 1911.00 17DSD92N*11 1116.003 3 — — 1 — 9–18 30 30A/250V 17DSE92B*10 891.00 17DSE92W*10 1719.00 17DSE92F*10 1891.00 17DSE92N*10 1098.00— — 10 10 1 — 9–18 30 30A/600V 17DSE92B*11 909.00 17DSE92W*11 1737.00 17DSE92F*11 1911.00 17DSE92N*11 1116.005 5 — — 1 — 13–27 30 30A/250V 17DSF92B*10 891.00 17DSF92W*10 1719.00 17DSF92F*10 1891.00 17DSF92N*10 1098.007 1 ⁄2 7 1 ⁄2 — — 1 — 13–27 60 60A/250V 17DSF92B*12 909.00 17DSF92W*12 1737.00 17DSF92F*12 1911.00 17DSF92N*12 1116.00— — 15 15 — 1 3 ⁄4 13–27 60 60A/600V 17ESF92B*13 1055.00 17ESF92W*13 1882.00 17ESF92F*13 2052.00 17ESF92N*13 1262.0010 10 — — — 1 3 ⁄4 20–40 60 60A/250V 17ESG92B*12 1038.00 17ESG92W*12 1865.00 17ESG92F*12 2071.00 17ESG92N*12 1245.00— — 15 20 2 — 13–27 60 60A/600V 17FSF92B*13 1409.00 17FSF92W*13 2684.00 17FSF92F*13 2953.00 17FSF92N*13 1702.0010 15 — — 2 — 22–45 60 60A/250V 17FSH92B*12 1390.00 17FSH92W*12 2667.00 17FSH92F*12 2935.00 17FSH92N*12 1685.00— — 25 25 2 — 22–45 60 60A/600V 17FSH92B*13 1409.00 17FSH92W*13 2684.00 17FSH92F*13 2953.00 17FSH92N*13 1702.00— — — 30 — 2 1 ⁄2 22–45 60 60A/600V 17GSH92B*13 1882.00 17GSH92W*13 4106.00 17GSH92F*13 4517.00 17GSH92N*13 2261.00— — 30 — — 2 1 ⁄2 22–45 100 100A/600V 17GSH92B*15 1959.00 17GSH92W*15 4182.00 17GSH92F*15 4600.00 17GSH92N*15 2338.0015 20 — — — 2 1 ⁄2 30–60 100 100A/250V 17GSJ92B*14 1959.00 17GSJ92W*14 4182.00 17GSJ92F*14 4600.00 17GSJ92N*14 2338.00— — 30 40 3 — 30–60 100 100A/600V 17HSJ92B*15 2356.00 17HSJ92W*15 4578.00 17HSJ92F*15 5037.00 17HSJ92N*15 2735.0020 25 — — 3 — 45–90 100 100A/250V 17HSK92B*14 2356.00 17HSK92W*14 4578.00 17HSK92F*14 5037.00 17HSK92N*14 2735.00— — 50 50 3 — 45–90 100 100A/600V 17HSK92B*15 2356.00 17HSK92W*15 4578.00 17HSK92F*15 5037.00 17HSK92N*15 2735.0025 30 — — — — 45–90 200 200A/250V 17HSK92B*16 2528.00 17HSK92W*16 4750.00 17HSK92F*16 5226.00 17HSK92N*16 2907.0030 40 — — — 3 1 ⁄2 57–115 200 200A/250V 17ISL92B*16 4208.00 17ISL92W*16 7051.00 17ISL92F*16 7756.00 17ISL92N*16 5259.00— — 75 75 — 3 1 ⁄2 57–115 200 200A/600V 17ISL92B*17 4208.00 17ISL92W*17 7051.00 17ISL92F*17 7756.00 17ISL92N*17 5259.0040 50 — — 4 — 67–135 200 200A/250V 17JTM92B*16 4553.00 17JTM92W*16 7396.00 17JTM92F*16 8136.00 17JTM92N*16 5604.00— — 100 100 4 — 67–135 200 200A/600V 17JTM92B*17 4553.00 17JTM92W*17 7396.00 17JTM92F*17 8136.00 17JTM92N*17 5604.0075 100 — — 5 — 55–250 400 400A/250V 17LPU92B*18 10114.00 17LPU92E*18 17368.00 — — 17LPU92N*18 12664.00— 100 — — 5 — 55–250 600 600A/250V 17LPU92B*20 10390.00 17LPU92E*20 17644.00 — — 17LPU92N*20 12940.00— — — 125 5 — 55–250 400 200A/600V 17LPU92B*17 9786.00 17LPU92E*17 17039.00 — — 17LPU92N*17 12336.00— — 200 200 5 — 55–250 400 400A/600V 17LPU92B*19 10114.00 17LPU92E*19 17368.00 — — 17LPU92N*19 12664.00— — 200 — 5 — 55–250 600 600A/600V 17LPU92B*21 10390.00 17LPU92E*21 17644.00 — — 17LPU92N*21 12940.00150 200 — — 6 — 160–540 600 600A/250V 17MPX92B*20 25854.00 17MPX92E*20 33108.00 — — 17MPX92N*20 28827.00— — 400 400 6 — 160–540 600 600A/600V 17MPX92B*21 25854.00 17MPX92E*21 33108.00 — — 17MPX92N*21 28827.00— — 400 400 6 — 160–540 800 800A/600V 17MPX92B*23 26997.00 17MPX92E*23 34251.00 — — 17MPX92N*23 29969.00— — 600 600 7 — 420–820 1200 1200A/600V 17NHY92B*23 33174.00 — — — — 17NHY92N*23 35499.00— — 900 900 8 — 420–1220 1600 1600A/600V 17PHZ92B*25 46953.00 — — — — 17PHZ92N*25 49279.0016 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating. Dual voltage coils not available in modified starters orin starter sizes 5–8. For conduit hubs and conversion instructions, see page16-87. Use Class J fuses only. Enclosure is NEMA Type 4 (painted steel). Single phase wiring page 16-130. F coil 100-250V AC 50/60Hz, or DC,H coil 150-500V AC 50/60Hz, or DC Only availableF coil 100-250V AC 50/60Hz, or DC For 316 Stainless Steel option see page 16-97.Discount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-21

Combination Heavy Duty StartersFusible with Solid State Overload, Class 17SelectionOrdering Information Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-117. Wiring Diagrams see page 16-131. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.Extra Wide Enclosure, 3-Phase, 3-Pole16CONTROLPRODUCTSNEMA & GeneralPurpose ControlMax HpEnclosureNEMA 1 NEMA 4/4X St-less NEMA 12, NEMA 3/3R, General Purpose Watertight, Dust-tight, NEMA 4 PaintedCorrosion ResistantIndustrial UseFuse 304 Stainless Steel WeatherproofOverload Disc Clip Size 316 Stainless Steel (optional) Watertight, Dust-tight200 230 460 575 NEMA Half Amp Amp Amps/Volts Volts Volts Volts Size Size Range Rating Volts Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $1⁄61⁄6 — — 0 — 0.25–1 30 30A/250V 17CSA82B*10 1064.00 17CSA82W*10 2322.00 17CSA82N*10 1443.00— — 1⁄31⁄2 0 — 0.25–1 30 30A/600V 17CSA82B*11 1082.00 17CSA82W*11 2339.00 17CSA82N*11 1461.001⁄23⁄4 — — 0 — 0.75–3 30 30A/250V 17CSB82B*10 1064.00 17CSB82W*10 2322.00 17CSB82N*10 1443.00— — 1 1 ⁄2 2 0 — 0.75–3 30 30A/600V 17CSB82B*11 1082.00 17CSB82W*11 2339.00 17CSB82N*11 1461.002 2 — — 0 — 2.5–10 30 30A/250V 17CSD82B*10 1064.00 17CSD82W*10 2322.00 17CSD82N*10 1443.00— — 5 5 0 — 2.5–10 30 30A/600V 17CSD82B*11 1082.00 17CSD82W*11 2339.00 17CSD82N*11 1461.003 3 — — 0 — 9–18 30 30A/250V 17CSE82B*10 1064.00 17CSE82W*10 2322.00 17CSE82N*10 1443.001⁄61⁄6 — — 1 — 0.25–1 30 30A/250V 17DSA82B*10 1107.00 17DSA82W*10 2365.00 17DSA82N*10 1486.00— — 1⁄31⁄2 1 — 0.25–1 30 30A/600V 17DSA82B*11 1125.00 17DSA82W*11 2384.00 17DSA82N*11 1504.001⁄23⁄4 — — 1 — 0.75–3 30 30A/250V 17DSB82B*10 1107.00 17DSB82W*10 2365.00 17DSB82N*10 1486.00— — 1 1 ⁄2 2 1 — 0.75–3 30 30A/600V 17DSB82B*11 1125.00 17DSB82W*11 2384.00 17DSB82N*11 1504.002 2 — — 1 — 2.5–10 30 30A/250V 17DSD82B*10 1107.00 17DSD82W*10 2365.00 17DSD82N*10 1486.00— — 5 5 1 — 2.5–10 30 30A/600V 17DSD82B*11 1125.00 17DSD82W*11 2384.00 17DSD82N*11 1504.003 3 — — 1 — 9–18 30 30A/250V 17DSE82B*10 1107.00 17DSE82W*10 2365.00 17DSE82N*10 1486.00— — 10 10 1 — 9–18 30 30A/600V 17DSE82B*11 1125.00 17DSE82W*11 2384.00 17DSE82N*11 1504.005 5 — — 1 — 13–27 30 30A/250V 17DSF82B*10 1107.00 17DSF82W*10 2365.00 17DSF82N*10 1486.007 1 ⁄2 7 1 ⁄2 — — 1 — 13–27 60 60A/250V 17DSF82B*12 1125.00 17DSF82W*12 2384.00 17DSF82N*12 1504.00— — 15 15 — 1 3 ⁄4 13–27 60 60A/600V 17ESF82B*13 1270.00 17ESF82W*13 2512.00 17ESF82N*13 1650.0010 10 — — — 1 3 ⁄4 20–40 60 60A/250V 17ESG82B*12 1254.00 17ESG82W*12 2512.00 17ESG82N*12 1633.00— — 15 20 2 — 13–27 60 60A/600V 17FSF82B*13 1623.00 17FSF82W*13 3331.00 17FSF82N*13 2088.0010 15 — — 2 — 22–45 60 60A/250V 17FSH82B*12 1606.00 17FSH82W*12 3314.00 17FSH82N*12 2072.00— — 25 25 2 — 22–45 60 60A/600V 17FSH82B*13 1623.00 17FSH82W*13 3331.00 17FSH82N*13 2088.00— — — 30 — 2 1 ⁄2 22–45 60 60A/600V 17GSH82B*13 2313.00 17GSH82W*13 5398.00 17GSH82N*13 3038.00— — 30 — — 2 1 ⁄2 22–45 100 100A/600V 17GSH82B*15 2391.00 17GSH82W*15 5475.00 17GSH82N*15 3114.0015 20 — — — 2 1 ⁄2 30–60 100 100A/250V 17GSJ82B*14 2391.00 17GSJ82W*14 5475.00 17GSJ82N*14 3114.00— — 30 40 3 — 30–60 100 100A/600V 17HSJ82B*15 2787.00 17HSJ82W*15 5871.00 17HSJ82N*15 3510.0020 25 — — 3 — 45–90 100 100A/250V 17HSK82B*14 2787.00 17HSK82W*14 5871.00 17HSK82N*14 3510.00— — 50 50 3 — 45–90 100 100A/600V 17HSK82B*15 2787.00 17HSK82W*15 5871.00 17HSK82N*15 3510.0025 30 — — 3 — 45–90 200 200A/250V 17HSK82B*16 2955.00 17HSK82W*16 6044.00 17HSK82N*16 3682.00Note: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating. Dual voltage coils not available in modified starters. For conduit hubs and conversion instructions, seepage 16-87. For 316 Stainless Steel option see page 16-97.16-22Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Combination Heavy Duty StartersFusible with Ambient Compensated Bimetal Overload, Class 17SelectionOrdering Information Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Heater elements see page 16-148. (3 required) Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-117. Wiring Diagrams see page 16-131. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.Standard Width Enclosure, 3-Phase, 3-Pole Max HpNote: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating.EnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R, General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedCorrosion Resistant Corrosion Resistant Industrial UseCont- 304 Stainless Steel Weatherproofactor Disc Fuse Clip 316 Stainless Steel (optional) Watertight, Dust-tight200 230 460 575 Amp NEMA Half Amp Size Catalog List Catalog List Catalog List Catalog ListVolts Volts Volts Volts Rating Size Size Rating Amps/Volts Number Price $ Number Price $ Number Price $ Number Price $3 3 — — 18 0 — 30 30A/250V 17CP92B*1081 810.00 17CP92W*1081 1637.00 17CP92F*1081 1802.00 17CP92N*1081 1016.00— — 5 5 18 0 — 30 30A/600V 17CP92B*1181 827.00 17CP92W*1181 1655.00 17CP92F*1181 1821.00 17CP92N*1181 1034.005 5 — — 27 1 — 30 30A/250V 17DP92B*1081 854.00 17DP92W*1081 1680.00 17DP92F*1081 1848.00 17DP92N*1081 1059.00— — 10 10 27 1 — 30 30A/600V 17DP92B*1181 872.00 17DP92W*1181 1698.00 17DP92F*1181 1868.00 17DP92N*1181 1077.007 1 ⁄2 7 1 ⁄2 — — 27 1 — 60 60A/250V 17DP92B*1281 872.00 17DP92W*1281 1698.00 17DP92F*1281 1868.00 17DP92N*1281 1077.0010 10 — — 40 — 1 3 ⁄4 60 60A/250V 17EP92B*1281 1000.00 17EP92W*1281 1827.00 17EP92F*1281 2011.00 17EP92N*1281 1206.00— — 15 15 40 — 1 3 ⁄4 60 60A/600V 17EP92B*1381 1016.00 17EP92W*1381 1844.00 17EP92F*1381 2029.00 17EP92N*1381 1223.0010 15 — — 45 2 — 60 60A/250V 17FP92B*1281 1353.00 17FP92W*1281 2628.00 17FP92F*1281 2891.00 17FP92N*1281 1646.00— — 25 25 45 2 — 60 60A/600V 17FP92B*1381 1370.00 17FP92W*1381 2645.00 17FP92F*1381 2910.00 17FP92N*1381 1663.00— — — 30 60 — 2 1 ⁄2 60 60A/600V 17GP92B*1381 1844.00 17GP92W*1381 4066.00 17GP92F*1381 4473.00 17GP92N*1381 2223.00— — 30 — 60 — 2 1 ⁄2 100 100A/600V 17GP92B*1581 1922.00 17GP92W*1581 4143.00 17GP92F*1581 4580.00 17GP92N*1581 2301.0015 20 — — 60 — 2 1 ⁄2 100 100A/250V 17GP92B*1481 1922.00 17GP92W*1481 4143.00 17GP92F*1481 4580.00 17GP92N*1481 2301.0020 25 — — 90 3 — 100 100A/250V 17HP92B*1481 2317.00 17HP92W*1481 4540.00 17HP92F*1481 4994.00 17HP92N*1481 2696.00— — 50 50 90 3 — 100 100A/600V 17HP92B*1581 2317.00 17HP92W*1581 4540.00 17HP92F*1581 4994.00 17HP92N*1581 2696.0025 30 — — 90 3 — 200 200A/250V 17HP92B*1681 2490.00 17HP92W*1681 4712.00 17HP92F*1681 5184.00 17HP92N*1681 3987.0030 40 — — 115 — 3 1 ⁄2 200 200A/250V 17IP92B*1681 4168.00 17IP92W*1681 7013.00 17IP92F*1681 7714.00 17IP92N*1681 5220.00— — 75 75 115 — 3 1 ⁄2 200 200A/600V 17IP92B*1781 4168.00 17IP92W*1781 7013.00 17IP92F*1781 7714.00 17IP92N*1781 5220.0040 50 — — 135 4 — 200 200A/250V 17JP92B*1681 4514.00 17JP92W*1681 7357.00 17JP92F*1681 8092.00 17JP92N*1681 5564.00— — 100 100 135 4 — 200 200A/600V 17JP92B*1781 4514.00 17JP92W*1781 7357.00 17JP92F*1781 8092.00 17JP92N*1781 5564.00Extra Wide Enclosure, 3-Phase, 3-PoleMax HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 12, NEMA 3/3R, General Purpose Watertight, Dust-tight NEMA 4 PaintedCont- Industrial Use Weatherproof Industrial Useactor Disc Fuse Clip 304 Stainless Steel Weatherproof200 230 460 575 Amp NEMA Half Amp Size316 Stainless Steel (optional) Watertight, Dust-tightVolts Volts Volts Volts Rating Size Size Rating Amps/Volts Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $3 3 — — 18 0 — 30 30A/250V 17CP82B*1081 1026.00 17CP82W*1081 2283.00 17CP82N*1081 1405.00— — 5 5 18 0 — 30 30A/600V 17CP82B*1181 1044.00 17CP82W*1181 2301.00 17CP82N*1181 1423.005 5 — — 27 1 — 30 30A/250V 17DP82B*1081 1068.00 17DP82W*1081 2326.00 17DP82N*1081 1447.00— — 10 10 27 1 — 30 30A/600V 17DP82B*1181 1086.00 17DP82W*1181 2344.00 17DP82N*1181 1465.007 1 ⁄2 7 1 ⁄2 — — 27 1 — 60 60A/250V 17DP82B*1281 1086.00 17DP82W*1281 2344.00 17DP82N*1281 1465.0010 10 — — 40 — 1 3 ⁄4 60 60A/250V 17EP82B*1281 1216.00 17EP82W*1281 2474.00 17EP82N*1281 1595.00— — 15 15 40 — 1 3 ⁄4 60 60A/600V 17EP82B*1381 1233.00 17EP82W*1381 2491.00 17EP82N*1381 1612.0010 15 — — 45 2 — 60 60A/250V 17FP82B*1281 1569.00 17FP82W*1281 3274.00 17FP82N*1281 2034.00— — 25 25 45 2 — 60 60A/600V 17FP82B*1381 1586.00 17FP82W*1381 3291.00 17FP82N*1381 2051.00— — — 30 60 — 2 1 ⁄2 60 60A/600V 17GP82B*1381 2274.00 17GP82W*1381 5358.00 17GP82N*1381 2998.00— — 30 — 60 — 2 1 ⁄2 100 100A/600V 17GP82B*1581 2352.00 17GP82W*1581 5436.00 17GP82N*1581 3075.0015 20 — — 60 — 2 1 ⁄2 100 100A/250V 17GP82B*1481 2352.00 17GP82W*1481 5436.00 17GP82N*1481 3075.0020 25 — — 90 3 — 100 100A/250V 17HP82B*1481 2748.00 17HP82W*1481 5832.00 17HP82N*1481 3471.00— — 50 50 90 3 — 100 100A/600V 17HP82B*1581 2748.00 17HP82W*1581 5832.00 17HP82N*1581 3471.0025 30 — — 90 3 — 200 200A/250V 17HP92B*1681 2490.00 17HP92W*1681 4712.00 17HP92N*1681 3987.00 Dual voltage coils not available in modified starters. For conduit hubs and conversion instructions, see page16-87. Single phase wiring page 16-130. For 316 Stainless Steel option see page 16-97.16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlDiscount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-23

Combination Heavy Duty StartersMCP Type with Solid State Overload, Class 18SelectionOrdering Information Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see pages 16-117. Wiring Diagrams see page 16-131. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.Standard Width Enclosure, 3-Phase, 3-Pole16CONTROLPRODUCTSNEMA & GeneralPurpose ControlMax HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9 NEMA 12, NEMA 3/3R General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3, 4 NEMA 4 Painted (thru Sz 4)Corrosion Resistant Corrosion Resistant Div 1 and Div 2 Industrial Use304 Stainless Steel Class I Groups C&D Weatherproof316 Stainless Steel Class II Groups E, F&G Watertight, Dust-tightMotorCircuitInterrupter(optional) Class IIIBolted EnclosuresIndoor/Outdoor Use200 230 460 575 NEMA Half Overload ETI Catalog List Catalog List Catalog List Catalog List Catalog ListVolts Volts Volts Volts Size Size Amp Range Amps Number Price $ Number Price $ Number Price $ Number Price $ Number Price $1⁄2 1⁄2 1 1 0 — 0.75–3 3 18CSB92B* 1133.00 18CSB92W* 1960.00 18CSB92F* 2157.00 18CSB92H* 2360.00 18CSB92N* 1340.002 2 5 5 0 — 2.5–10 10 18CSD92B* 1133.00 18CSD92W* 1960.00 18CSD92F* 2157.00 18CSD92H* 2360.00 18CSD92N* 1340.003 3 — — 0 — 9–18 25 18CSE92B* 1133.00 18CSE92W* 1960.00 18CSE92F* 2157.00 18CSE92H* 2360.00 18CSE92N* 1340.001⁄2 1⁄2 1 1 1 — 0.75–3 3 18DSB92B* 1176.00 18DSB92W* 2002.00 18DSB92F* 2204.00 18DSB92H* 2416.00 18DSB92N* 1382.002 2 5 5 1 — 2.5–10 10 18DSD92B* 1176.00 18DSD92W* 2002.00 18DSD92F* 2204.00 18DSD92H* 2416.00 18DSD92N* 1382.003 3 7 1 ⁄2 10 1 — 9–18 25 18DSE92B* 1176.00 18DSE92W* 2002.00 18DSE92F* 2204.00 18DSE92H* 2416.00 18DSE92N* 1382.007 1 ⁄2 7 1 ⁄2 10 — 1 — 13–27 30 18DSF92B* 1176.00 18DSF92W* 2002.00 18DSF92F* 2204.00 18DSF92H* 2416.00 18DSF92N* 1382.00— — 15 15 — 1 3 ⁄4 13–27 40 18ESF92B* 1305.00 18ESF92W* 2133.00 18ESF92F* 2346.00 18ESF92H* 3067.00 18ESF92N* 1512.0010 10 — — — 1 3 ⁄4 20–40 50 18ESG92B* 1305.00 18ESG92W* 2133.00 18ESG92F* 2346.00 18ESG92H* 3067.00 18ESG92N* 1512.00— — 15 20 2 — 13–27 40 18FSF92B* 1305.00 18FSF92W* 2925.00 18FSF92F* 3218.00 18FSF92H* 3214.00 18FSF92N* 1942.0010 15 25 25 2 — 22–45 50 18FSH92B* 1650.00 18FSH92W* 2925.00 18FSH92F* 3218.00 18FSH92H* 3214.00 18FSH92N* 1942.00— — 30 30 — 2 1 ⁄2 22–45 50 18GSH92B* 2192.00 18GSH92W* 4415.00 18GSH92F* 4856.00 18GSH92H* 4250.00 18GSH92N* 2572.0015 20 — — — 2 1 ⁄2 30–60 100 18GSJ92B* 2192.00 18GSJ92W* 4415.00 18GSJ92F* 4856.00 18GSJ92H* 4250.00 18GSJ92N* 2572.00— — 30 30 3 — 30–60 50 18HSJ92B* 2381.00 18HSJ92W* 4605.00 18HSJ92F* 5065.00 18HSJ92H* 5285.00 18HSJ92N* 2760.0025 30 50 50 3 — 45–90 100 18HSK92B* 2381.00 18HSK92W* 4605.00 18HSK92F* 5065.00 18HSK92H* 5285.00 18HSK92N* 2760.0030 40 75 75 — 3 1 ⁄2 57–115 125 18ISL92B* 4837.00 18ISL92W* 7680.00 18ISL92F* 8448.00 18ISL92H* 6749.00 18ISL92N* 5888.0040 50 100 100 4 — 67–135 150 18JTM92B* 5182.00 18JTM92W* 8024.00 18JTM92F* 8827.00 18JTM92H* 8214.00 18JTM92N* 6233.0050 75 150 200 5 — 55–250 250 18LPT92B* 11967.00 18LPT92E* 19220.00 — — 18LPT92H* 16720.00 18LPT92N* 13862.0075 100 200 — 5 — 55–250 400 18LPU92B* 11967.00 18LPU92E* 19811.00 — — — — 18LPU92N* 13862.00100 125 250 300 6 — 160–540 400 18MPW92B* 25349.00 18MPW92E* 29657.00 — — — — 18MPW92N* 27676.00150 200 400 400 6 — 160–540 600 18MPX92B* 25940.00 18MPX92E* 30247.00 — — — — 18MPX92N* 28266.00— 250 500 500 7 — 420–820 800 18NHV92B* 35021.00 — — — — — — 18NHV92N* 37346.00— 300 600 600 7 — 420–820 1000 18NHY92B* 35021.00 — — — — — — 18NHY92N* 37346.00— 400 800 800 8 — 420–1220 1200 18PHZ92B* 52095.00 — — — — — — 18PHZ92N* 54420.00— 450 900 900 8 — 420–1220 1600 18PH192B* 52095.00 — — — — — — 18PH192N* 54420.00Note: Hp’s shown above are based on the overloadamp range for the FLA’s (per the National ElectricCode) of typical industrial motors. All starter sizescarry one maximum Hp rating. Dual voltage coils not available in modified starters orin starter sizes 5–8. For conduit hubs and conversion instructions, seepage 16-87. Enclosure is NEMA Type 4 (painted steel). F coil 100-250V AC 50/60Hz, or DC,H coil 150-500V AC 50/60Hz, or DC Only availableF coil 100-250V AC 50/60Hz, or DC For 316 Stainless Steel option see page 16-97.16-24Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Combination Heavy Duty StartersMCP Type with Solid State Overload, Class 18SelectionOrdering Information Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-117. Wiring Diagrams see page 16-131. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.Extra Wide Enclosure, 3-Phase, 3-PoleMax HpEnclosureNEMA 1 NEMA 4/4X Stainless General Purpose Watertight, Dust-tightNEMA 12, NEMA 3/3R, NEMA 4 PaintedCorrosion ResistantIndustrial UseMotor 304 Stainless Steel WeatherproofCircuit 316 Stainless Steel (optional) Watertight, Dust-tight200 230 460 575 NEMA Half Interrupter List List ListVolts Volts Volts Volts Size Size Overload Amp Range ETI Amps Catalog Number Price $ Catalog Number Price $ Catalog Number Price $1⁄2 1⁄2 1 1 0 — 0.75–3 3 18CSB82B* 1348.00 18CSB82W* 2605.00 18CSB82N* 1727.002 2 5 5 0 — 2.5–10 10 18CSD82B* 1348.00 18CSD82W* 2605.00 18CSD82N* 1727.003 3 — — 0 — 9–18 25 18CSE82B* 1348.00 18CSE82W* 2605.00 18CSE82N* 1727.001⁄2 1⁄2 1 1 1 — 0.75–3 3 18DSB82B* 1391.00 18DSB82W* 2649.00 18DSB82N* 1770.002 2 5 5 1 — 2.5–10 10 18DSD82B* 1391.00 18DSD82W* 2649.00 18DSD82N* 1770.003 3 7 1 ⁄2 10 1 — 9–18 25 18DSE82B* 1391.00 18DSE82W* 2649.00 18DSE82N* 1770.007 1 ⁄2 7 1 ⁄2 10 — 1 — 13–27 30 18DSF82B* 1391.00 18DSF82W* 2649.00 18DSF82N* 1770.00— — 15 15 — 1 3 ⁄4 13–27 40 18ESF82B* 1520.00 18ESF82W* 2779.00 18ESF82N* 1899.0010 10 — — — 1 3 ⁄4 20–40 50 18ESG82B* 1520.00 18ESG82W* 2779.00 18ESG82N* 1899.00— — 15 20 2 — 13–27 40 18FSF82B* 1865.00 18FSF82W* 3571.00 18FSF82N* 2330.0010 15 25 25 2 — 22–45 50 18FSH82B* 1865.00 18FSH82W* 3571.00 18FSH82N* 2330.00— — 30 30 — 2 1 ⁄2 22–45 50 18GSH82B* 2623.00 18GSH82W* 5708.00 18GSH82N* 3347.0015 20 — — — 2 1 ⁄2 30–60 100 18GSJ82B* 2623.00 18GSJ82W* 5708.00 18GSJ82N* 3347.00— — 30 30 3 — 30–60 50 18HSJ82B* 2812.00 18HSJ82W* 5897.00 18HSJ82N* 3536.0025 30 50 50 3 — 45–90 100 18HSK82B* 2812.00 18HSK82W* 5897.00 18HSK82N* 3536.0016 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating.Discount Schedule NEMA Dual voltage coils not available in modified starters. For conduit hubs and conversion instructions, seepage 16-87. For 316 Stainless Steel option see page 16-97.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-25

Combination Heavy Duty StartersMCP Type with Ambient Compensated Bimetal Overload, Class 18SelectionOrdering Information Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Heater elements see page 16-148. (3 required) Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-117. Wiring Diagrams see page 16-131. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.Standard Width Enclosure, 3-Phase, 3-Pole16CONTROLPRODUCTSNEMA & GeneralPurpose ControlMax HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9 NEMA 12,NEMA 3/3R, General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3 & 4 NEMA 4 PaintedCorrosion Resistant Corrosion Resistant Div 1 and Div 2 Industrial Use304 Stainless Steel Class I Groups C & D Weatherproof316 Stainless Steel Class II Groups E, F & G Watertight, Dust-tightCont-Motor(optional) Class IIIBolted EnclosuresactorCircuitIndoor/Outdoor Use200 230 460 575 Amp NEMA Half Interrupter Catalog List Catalog List Catalog List Catalog List Catalog ListVolts Volts Volts Volts Rating Size Size ETI Amps Number Price $ Number Price $ Number Price $ Number Price $ Number Price $1⁄2 1⁄2 1 1 18 0 — 3 18CP92BA*81 1094.00 18CP92WA*81 1922.00 18CP92FA*81 2114.00 18CP92HA*81 2322.00 18CP92NA*81 1301.001 1 3 3 18 0 — 10 18CP92BB*81 1094.00 18CP92WB*81 1922.00 18CP92FB*81 2114.00 18CP92HB*81 2322.00 18CP92NB*81 1301.003 3 5 5 18 0 — 25 18CP92BC*81 1094.00 18CP92WC*81 1922.00 18CP92FC*81 2114.00 18CP92HC*81 2322.00 18CP92NC*81 1301.001⁄2 1⁄2 1 1 27 1 — 3 18DP92BA*81 1137.00 18DP92WA*81 1965.00 18DP92FA*81 2162.00 18DP92HA*81 2377.00 18DP92NA*81 1344.001 1 3 3 27 1 — 10 18DP92BB*81 1137.00 18DP92WB*81 1965.00 18DP92FB*81 2162.00 18DP92HB*81 2377.00 18DP92NB*81 1344.003 3 7 1 ⁄2 7 1 ⁄2 27 1 — 25 18DP92BD*81 1137.00 18DP92WD*81 1965.00 18DP92FD*81 2162.00 18DP92HD*81 2377.00 18DP92ND*81 1344.007 1 ⁄2 7 1 ⁄2 10 10 27 1 — 30 18DP92BE*81 1137.00 18DP92WE*81 1965.00 18DP92FE*81 2162.00 18DP92HE*81 2377.00 18DP92NE*81 1344.00— — 15 15 40 — 1 3 ⁄4 40 18EP92BF*81 1266.00 18EP92WF*81 2094.00 18EP92FF*81 2304.00 18EP92HF*81 3028.00 18EP92NF*81 1473.0010 10 — — 40 — 1 3 ⁄4 50 18EP92BG*81 1266.00 18EP92WG*81 2094.00 18EP92FG*81 2304.00 18EP92HG*81 3028.00 18EP92NG*81 1473.00— — 20 20 45 2 — 40 18FP92BH*81 1612.00 18FP92WH*81 2886.00 18FP92FH*81 3176.00 18FP92HH*81 3175.00 18FP92NH*81 1905.0010 15 25 25 45 2 — 50 18FP92BJ*81 1612.00 18FP92WJ*81 2886.00 18FP92FJ*81 3176.00 18FP92HJ*81 3175.00 18FP92NJ*81 1905.0010 15 30 30 60 — 2 1 ⁄2 50 18GP92BK*81 2154.00 18GP92WK*81 4376.00 18GP92FK*81 4815.00 18GP92HK*81 4212.00 18GP92NK*81 2533.0015 20 — — 60 — 2 1 ⁄2 100 18GP92BL*81 2154.00 18GP92WL*81 4376.00 18GP92FL*81 4815.00 18GP92HL*81 4212.00 18GP92NK*81 2533.00— — 30 30 90 3 — 50 18HP92BM*81 2343.00 18HP92WM*81 4565.00 18HP92FM*81 5023.00 18HP92HM*81 5247.00 18HP92NM*81 2722.0025 30 50 50 90 3 — 100 18HP92BN*81 2343.00 18HP92WN*81 4565.00 18HP92FN*81 5023.00 18HP92HN*81 5247.00 18HP92NN*81 2722.0030 40 75 75 115 — 3 1 ⁄2 125 18IP92BP*81 4798.00 18IP92WP*81 7641.00 18IP92FP*81 8406.00 18IP92HP*81 6711.00 18IP92NP*81 5850.0040 50 100 100 135 4 — 150 18JP92BR*81 5143.00 18JP92WR*81 7986.00 18JP92FR*81 8786.00 18JP92HR*81 8175.00 18JP92NR*81 —Extra Wide Enclosure, 3-Phase, 3-PoleMax HpEnclosureNEMA 1 NEMA 4/4X Stainless General Purpose Watertight, Dust-tightNEMA 12, NEMA 3/3R, NEMA 4 PaintedCorrosion ResistantIndustrial Use304 Stainless Steel WeatherproofContactor 316 Stainless Steel (optional) Watertight, Dust-tight200 230 460 575 Amp NEMA Half Motor Circuit Catalog List Catalog List Catalog ListVolts Volts Volts Volts Rating Size Size Interrupter ETI Amps Number Price $ Number Price $ Number Price $1⁄21⁄2 1 1 18 0 — 3 18CP82BA*81 1309.00 18CP82WA*81 2567.00 18CP82NA*81 1688.001 1 3 3 18 0 — 10 18CP82BB*81 1309.00 18CP82WB*81 2567.00 18CP82NB*81 1688.003 3 5 5 18 0 — 25 18CP82BC*81 1309.00 18CP82WC*81 2567.00 18CP82NC*81 1688.001⁄21⁄2 1 1 27 1 — 3 18DP82BA*81 1353.00 18DP82WA*81 2610.00 18DP82NA*81 1732.001 1 3 3 27 1 — 10 18DP82BB*81 1353.00 18DP82WB*81 2610.00 18DP82NB*81 1732.003 3 7 1 ⁄2 7 1 ⁄2 27 1 — 25 18DP82BD*81 1353.00 18DP82WD*81 2610.00 18DP82ND*81 1732.007 1 ⁄2 7 1 ⁄2 10 10 27 1 — 30 18DP82BE*81 1353.00 18DP82WE*81 2610.00 18DP82NE*81 1732.00— — 15 15 40 — 1 3 ⁄4 40 18EP82BF*81 1482.00 18EP82WF*81 2739.00 18EP82NF*81 1861.0010 10 — — 40 — 1 3 ⁄4 50 18EP82BG*81 1482.00 18EP82WG*81 2739.00 18EP82NG*81 1861.00— — 20 20 45 2 — 40 18FP82BH*81 1826.00 18FP82WH*81 3532.00 18FP82NH*81 2291.0010 15 25 25 45 2 — 50 18FP82BJ*81 1826.00 18FP82WJ*81 3532.00 18FP82NJ*81 2291.0010 15 30 30 60 — 2 1 ⁄2 50 18GP82BK*81 1826.00 18GP82WK*81 3532.00 18GP82NK*81 2291.0015 20 — — 60 — 2 1 ⁄2 100 18GP82BL*81 2584.00 18GP82WL*81 5668.00 18GP82NL*81 3308.00— — 30 30 90 3 — 50 18HP82BM*81 2774.00 18HP82WM*81 5859.00 18HP82NM*81 3498.0025 30 50 50 90 3 — 100 18HP82BN*81 2774.00 18HP82WN*81 5859.00 18HP82NN*81 3498.00Note: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating. Dual voltage coils not available in modified starters. For conduit hubs and conversion instructions, seepage 16-87. For 316 Stainless Steel option see page 16-97.16-26Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Reversing Heavy Duty StartersSolid State Overload with Manual Reset, Class 22SelectionOrdering Information Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see pages 16-104 open and 16-120 enclosed. Wiring Diagrams see page 16-132. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.Open Type & Standard Width Enclosure, 3-Phase, 3-Pole Max HpEnclosureOpen Type NEMA 1 NEMA 4/4X NEMA 4X NEMA 7 & 9 NEMA 12 General Purpose Stainless Fiberglass NEMA 3 & 4 NEMA 3/3RWatertight, Dust-tight Watertight, Dust-tight Div 1 and Div 2 Industrial UseCorrosion Resistant Corrosion Resistant Class I Groups C & D Weatherproof304 Stainless Steel Class II Groups E, F & GClass IIIBolted EnclosuresOverloadIndoor/Outdoor Use200 230 460 575 NEMA Half Amp Catalog List Catalog List Catalog List Catalog List Catalog List Catalog ListVolts Volts Volts Volts Size Size Range Number Price $ Number Price $ Number Price $ Number Price $ Number Price $ Number Price $1⁄6 1⁄6 1⁄3 1⁄2 00 — 0.25–1 22BSA32A* 598.00 22BSA32B* 633.00 Use Size 0 — Use Size 0 — Use Size 0 — Use Size 0 —1⁄2 3⁄4 1 1 ⁄2 2 00 — 0.75–3 22BSB32A* 598.00 22BSB32B* 633.00 Use Size 0 — Use Size 0 — Use Size 0 — Use Size 0 —1 1 ⁄2 1 1 ⁄2 2 — 00 — 2.5–10 22BSD32A* 598.00 22BSD32B* 633.00 Use Size 0 — Use Size 0 — Use Size 0 — Use Size 0 —1⁄6 1⁄6 1⁄3 1⁄2 0 — 0.25–1 22CSA32A* 702.00 22CSA32B* 737.00 22CSA32W* 1133.00 22CSA32F* 1246.00 22CSA32H* 2330.00 22CSA320* 891.001⁄2 3⁄4 1 1 ⁄2 2 0 — 0.75–3 22CSB32A* 702.00 22CSB32B* 737.00 22CSB32W* 1133.00 22CSB32F* 1246.00 22CSB32H* 2330.00 22CSB320* 891.002 2 5 5 0 — 2.5–10 22CSD32A* 702.00 22CSD32B* 737.00 22CSD32W* 1133.00 22CSD32F* 1246.00 22CSD32H* 2330.00 22CSD320* 891.003 3 — — 0 — 9–18 22CSE32A* 702.00 22CSE32B* 737.00 22CSE32W* 1133.00 22CSE32F* 1246.00 22CSE32H* 2330.00 22CSE320* 891.001⁄6 1⁄6 1⁄3 1⁄2 1 — 0.25–1 22DSA32A* 789.00 22DSA32B* 840.00 22DSA32W* 1391.00 22DSA32F* 1531.00 22DSA32H* 2442.00 22DSA320* 995.001⁄2 3⁄4 1 1 ⁄2 2 1 — 0.75–3 22DSB32A* 789.00 22DSB32B* 840.00 22DSB32W* 1391.00 22DSB32F* 1531.00 22DSB32H* 2442.00 22DSB320* 995.002 2 5 5 1 — 2.5–10 22DSD32A* 789.00 22DSD32B* 840.00 22DSD32W* 1391.00 22DSD32F* 1531.00 22DSD32H* 2442.00 22DSD320* 995.003 3 10 10 1 — 9–18 22DSE32A* 789.00 22DSE32B* 840.00 22DSE32W* 1391.00 22DSE32F* 1531.00 22DSE32H* 2442.00 22DSE320* 995.007 1 ⁄2 7 1 ⁄2 — — 1 — 13–27 22DSF32A* 789.00 22DSF32B* 840.00 22DSF32W* 1391.00 22DSF32F* 1531.00 22DSF32H* 2442.00 22DSF320* 995.00— — 15 15 — 1 3 ⁄4 13–27 22ESF32A* 1047.00 22ESF32B* 1098.00 22ESF32W* 1650.00 22ESF32F* 1814.00 22ESF32H* 2701.00 22ESF320* 1254.0010 10 — — — 1 3 ⁄4 20–40 22ESG32A* 1047.00 22ESG32B* 1098.00 22ESG32W* 1650.00 22ESG32F* 1814.00 22ESG32H* 2701.00 22ESG320* 1254.00— — 15 20 2 — 13–27 22FSF32A* 1461.00 22FSF32B* 1598.00 22FSF32W* 2494.00 22FSF32F* 2743.00 22FSF32H* 4054.00 22FSF320* 1856.0010 15 25 25 2 — 22–45 22FSH32A* 1461.00 22FSH32B* 1598.00 22FSH32W* 2494.00 22FSH32F* 2743.00 22FSH32H* 4054.00 22FSH320* 1856.00— — 30 30 — 2 1 ⁄2 22–45 22GSH32A* 1926.00 22GSH32B* 2115.00 22GSH32W* 3227.00 22GSH32F* 3549.00 22GSH32H* 5165.00 22GSH320* 2528.0015 20 — — — 2 1 ⁄2 30–60 22GSJ32A* 1926.00 22GSJ32B* 2115.00 22GSJ32W* 3227.00 22GSJ32F* 3549.00 22GSJ32H* 5165.00 22GSJ320* 2528.00— — 30 40 3 — 30–60 22HSJ32A* 2399.00 22HSJ32B* 2640.00 22HSJ32W* 3968.00 22HSJ32F* 4365.00 22HSJ32H* 6491.00 22HSJ320* 3210.0025 30 50 50 3 — 45–90 22HSK32A* 2399.00 22HSK32B* 2640.00 22HSK32W* 3968.00 22HSK32F* 4365.00 22HSK32H* 6491.00 22HSK320* 3210.0030 40 75 75 — 3 1 ⁄2 57–115 22ISL32A* 5112.00 22ISL32B* 5561.00 22ISL32W* 7903.00 22ISL32F* 8694.00 22ISL32H* 11730.00 22ISL320* 6440.0040 50 100 100 4 — 67–135 22JTM32A* 5802.00 22JTM32B* 6250.00 22JTM32W* 8594.00 22JTM32F* 9454.00 22JTM32H* 12418.00 22JTM320* 7128.0075 100 200 200 5 — 55–250 22LPU32A* 11113.00 22LPU32B* 13707.00 22LPU32E* 16739.00 — — — — 22LPU320* 15127.00150 200 400 400 6 — 160–540 22MPX32A* 26172.00 22MPX32B* 30480.00 22MPX32E* 34788.00 — — — — 22MPX320* 33665.00— 300 600 600 7 — 420–820 22NHY32A* 37088.00 22NHY32B* 41395.00 — — — — — — 22NHY320* 43721.00— 450 900 900 8 — 420–1220 22PHZ32A* 54541.00 22PHZ32B* 58849.00 — — — — — — 22PHZ320* 61175.0016 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All Starter Sizes carryone maximum Hp rating. Dual voltage coils not available in size 5–8 starters. For conduit hubs and conversion instructions, seepage 16-87. For single phase, select a starter with bimetal OL onpage 16-28. Enclosure is rated only NEMA 4 (painted steel). Only availableF coil 100-250V AC 50/60Hz, or DCH coil 150-500V AC 50/60Hz, or DC Only availableF coil 100-250V AC 50/60Hz, or DC Auxiliary contacts22B-22E 4th pole built-in22F-22J 2 NO & 2 NCDiscount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-27

Reversing Heavy Duty StartersAmbient Compensated Bimetal Overload with Manual and Auto Reset, Class 22SelectionOrdering Information Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Heater elements see page 16-148. Single phase starters require 1 heaterelement. 3-phase starters require 3 heater elements. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see pages 16-104 open and 16-120 enclosed. Wiring Diagrams see page 16-132. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.16Open Type & Standard Width Enclosure, 3-Phase, 3-PoleMax HpEnclosureOpen Type NEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9 NEMA 12 General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3 & 4 NEMA 3/3RCorrosion Resistant Corrosion Resistant Div 1 and Div 2 Industrial Use304 Stainless Steel Indoor/Outdoor Use Class I Groups C & D WeatherproofClass II Groups E, F & GCont-Class IIIactorBolted Enclosures200 230 460 575 Amp NEMA Half Catalog List Catalog List Catalog List Catalog List Catalog List Catalog ListVolts Volts Volts Volts Rating Size Size Number Price $ Number Price $ Number Price $ Number Price $ Number Price $ Number Price $1 1 ⁄2 1 1 ⁄2 2 2 9 00 — 22BP32A*81 561.00 22BP32B*81 595.00 Use Size 0 — Use Size 0 — Use Size 0 — Use Size 0 —3 3 5 5 18 0 — 22CP32A*81 664.00 22CP32B*81 698.00 22CP32W*81 1094.00 22CP32F*81 1203.00 22CP32H*81 2291.00 22CP320*81 854.007 1 ⁄2 7 1 ⁄2 10 10 27 1 — 22DP32A*81 750.00 22DP32B*81 801.00 22DP32W*81 1353.00 22DP32F*81 1489.00 22DP32H*81 2403.00 22DP320*81 957.0010 10 15 15 40 — 1 3 ⁄4 22EP32A*81 1008.00 22EP32B*81 1060.00 22EP32W*81 1612.00 22EP32F*81 1773.00 22EP32H*81 2663.00 22EP320*81 1215.0010 15 25 25 45 2 — 22FP32A*81 1422.00 22FP32B*81 1559.00 22FP32W*81 2456.00 22FP32F*81 2702.00 22FP32H*81 4014.00 22FP320*81 1819.0015 20 30 30 60 — 2 1 ⁄2 22GP32A*81 1887.00 22GP32B*81 2077.00 22GP32W*81 3187.00 22GP32F*81 3506.00 22GP32H*81 5126.00 22GP320*81 2490.0025 30 50 50 90 3 — 22HP32A*81 2360.00 22HP32B*81 2602.00 22HP32W*81 3928.00 22HP32F*81 4322.00 22HP32H*81 6452.00 22HP320*81 3170.0030 40 75 75 115 — 3 1 ⁄2 22IP32A*81 5075.00 22IP32B*81 5522.00 22IP32W*81 7866.00 22IP32F*81 8653.00 22IP32H*81 11691.00 22IP320*81 6401.0040 50 100 100 135 4 — 22JG32A*81 5763.00 22JG32B*81 6212.00 22JG32W*81 8554.00 22JG32F*81 9410.00 22JG32H*81 12381.00 22JG320*81 7090.00CONTROLPRODUCTSNEMA & GeneralPurpose ControlOpen Type & Standard Width Enclosure, Single Phase, 3-Wire, 2-Pole Max HpEnclosureOpen Type NEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9 NEMA 12 General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3 & 4 NEMA 3/3RCorrosion Resistant Corrosion Resistant Div 1 and Div 2 Industrial Use304 Stainless Steel Class I Groups C & D WeatherproofClass II Groups E, F & GClass IIIBolted Enclosures208/ Contactor Indoor/Outdoor Use115 230 Amp NEMA Catalog List Catalog List Catalog List Catalog List Catalog List Catalog ListVolts Volts Rating Size Number Price $ Number Price $ Number Price $ Number Price $ Number Price $ Number Price $1⁄3 1 9 00 22BP12A*81 521.00 22BP12B*81 555.00 Use Size 0 — Use Size 0 — Use Size 0 — Use Size 0 —1 2 18 0 22CP12A*81 625.00 22CP12B*81 658.00 22CP12W*81 1055.00 22CP12F*81 1162.00 22CP12H*81 1162.00 22CP120*81 814.002 3 27 1 22DP12A*81 711.00 22DP12B*81 762.00 22DP12W*81 1314.00 22DP12F*81 1446.00 22DP12H*81 1446.00 22DP120*81 917.003 5 35 1P 22EP12A*81 969.00 22EP12B*81 1021.00 22EP12W*81 1572.00 22EP12F*81 1730.00 22EP12H*81 1730.00 22EP120*81 1176.00Note: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All Starter Sizes carryone maximum Hp rating. For conduit hubs and conversion instructions, seepage 16-87. Coil D, F, or G will be wired for Incoming Voltage.J coil will be wired for 24V separate source. Coils E,H, and L do not apply to single phase starters. Auxiliary contacts22B-22E 4th pole built-in22F-22J 2 NO & 2 NC16-28Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Combination Reversing Heavy Duty StartersNon-Fusible, Class 25SelectionOrdering Information Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Heater elements see page 16-148. (3 required) Fuse clips see page 16-95. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page16-122. Wiring Diagrams see page16-133. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.Standard Width Enclosure with Solid State Overload, 3-Phase, 3-PoleMax HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12 General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3/3RCorrosion Resistant Corrosion Resistant304 Stainless SteelNEMA 4 Painted(thru Sz 4)Industrial UseWeatherproofDiscWatertight, Dust-tight200 230 460 575 NEMA Half Amp Amp Catalog List Catalog List Catalog List Catalog ListVolts Volts Volts Volts Size Size Range Rating Number Price $ Number Price $ Number Price $ Number Price $1⁄61⁄61⁄31⁄2 0 — 0.25–1 30 25CSA92B* 1323.00 25CSA92W* 2373.00 25CSA92F* 2611.00 25CSA92N* 1616.001⁄23⁄4 1 1 ⁄2 2 0 — 0.75–3 30 25CSB92B* 1323.00 25CSB92W* 2373.00 25CSB92F* 2611.00 25CSB92N* 1616.002 2 5 5 0 — 2.5–10 30 25CSD92B* 1323.00 25CSD92W* 2373.00 25CSD92F* 2611.00 25CSD92N* 1616.003 3 — — 0 — 9–18 30 25CSE92B* 1323.00 25CSE92W* 2373.00 25CSE92F* 2611.00 25CSE92N* 1616.001⁄61⁄61⁄31⁄2 1 — 0.25–1 30 25DSA92B* 1409.00 25DSA92W* 2459.00 25DSA92F* 2705.00 25DSA92N* 1702.001⁄23⁄4 1 1 ⁄2 2 1 — 0.75–3 30 25DSB92B* 1409.00 25DSB92W* 2459.00 25DSB92F* 2705.00 25DSB92N* 1702.002 2 5 5 1 — 2.5–10 30 25DSD92B* 1409.00 25DSD92W* 2459.00 25DSD92F* 2705.00 25DSD92N* 1702.003 3 10 10 1 — 9–18 30 25DSE92B* 1409.00 25DSE92W* 2459.00 25DSE92F* 2705.00 25DSE92N* 1702.007 1 ⁄2 7 1 ⁄2 — — 1 — 13–27 60 25DSF92B* 1409.00 25DSF92W* 2459.00 25DSF92F* 2705.00 25DSF92N* 1702.00— — 15 15 — 1 3 ⁄4 13–27 60 25ESF92B* 1667.00 25ESF92W* 2718.00 25ESF92F* 2991.00 25ESF92N* 1960.0010 10 — — — 1 3 ⁄4 20–40 60 25ESG92B* 1667.00 25ESG92W* 2718.00 25ESG92F* 2991.00 25ESG92N* 1960.00— — 15 20 2 — 13–27 60 25FSF92B* 2330.00 25FSF92W* 3933.00 25FSF92F* 4326.00 25FSF92N* 2709.0010 15 25 25 2 — 22–45 60 25FSH92B* 2330.00 25FSH92W* 3933.00 25FSH92F* 4326.00 25FSH92N* 2709.00— — 30 30 — 2 1 ⁄2 22–45 100 25GSH92B* 3364.00 25GSH92W* 6173.00 25GSH92F* 6790.00 25GSH92N* 3864.0015 20 — — — 2 1 ⁄2 30–60 100 25GSJ92B* 3364.00 25GSJ92W* 6173.00 25GSJ92F* 6790.00 25GSJ92N* 3864.00— — 30 40 3 — 30–60 100 25HSJ92B* 3838.00 25HSJ92W* 6646.00 25HSJ92F* 7312.00 25HSJ92N* 4338.0020 25 50 50 3 — 45–90 100 25HSK92B* 3838.00 25HSK92W* 6646.00 25HSK92F* 7312.00 25HSK92N* 4338.0030 40 75 75 — 3 1 ⁄2 57–115 200 25ISL92B* 7310.00 25ISL92W* 10859.00 25ISL92F* 11946.00 25ISL92N* 8680.0040 50 100 100 4 — 67–135 200 25JTM92B* 7999.00 25JTM92W* 11548.00 25JTM92F* 12703.00 25JTM92N* 9369.0075 100 200 200 5 — 55–250 400 25LPU92B* 15576.00 25LPU92E* 23408.00 — — 25LPU92N* 18833.00150 200 400 400 6 — 160–540 800 25MPX92B* 38686.00 25MPX92E* 42993.00 — — 25MPX92N* 41012.00— 300 600 600 7 — 420–820 1200 25NHY92B* 52457.00 — — — — 25NHY92N* 54783.00— 450 900 900 8 — 420–1220 1600 25PHZ92B* 67132.00 — — — — 25PHZ92N* 69459.00Standard Width Enclosure with Ambient Compensated Bimetal Overload, 3-Phase, 3-PoleMax HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12 General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3/3RCorrosion Resistant Corrosion Resistant NEMA 4 PaintedCont-304 Stainless Steel Industrial UseWeatherproofactorDiscWatertight, Dust-tight200 230 460 575 Amp NEMA Half Amp Catalog List Catalog List Catalog List Catalog ListVolts Volts Volts Volts Rating Size Size Rating Number Price $ Number Price $ Number Price $ Number Price $3 3 5 5 18 0 — 30 25CP92B*81 1284.00 25CP92W*81 2335.00 25JP92W*81 11510.00 25CP92N*81 1577.007 1 ⁄2 7 1 ⁄2 10 10 27 1 — 30 25DP92B*81 1370.00 25DP92W*81 2421.00 25DP92F*81 2664.00 25DP92N*81 1663.0010 10 15 15 40 — 1 3 ⁄4 60 25EP92B*81 1629.00 25EP92W*81 2680.00 25EP92F*81 2947.00 25EP92N*81 1922.0010 15 25 25 45 2 — 60 25FP92B*81 2291.00 25FP92W*81 3893.00 25FP92F*81 4284.00 25FP92N*81 2670.0015 20 30 30 60 — 2 1 ⁄2 100 25GP92B*81 3325.00 25GP92W*81 6134.00 25GP92F*81 6747.00 25GP92N*81 3825.0025 30 50 50 90 3 — 100 25HP92B*81 3799.00 25HP92W*81 6608.00 25HP92F*81 7268.00 25HP92N*81 4299.0030 40 75 75 115 — 3 1 ⁄2 200 25IP92B*81 7271.00 25IP92W*81 10820.00 25IP92F*81 11903.00 25IP92N*81 8640.0040 50 100 100 135 4 — 200 25JP92B*81 7673.00 25JP92W*81 11510.00 25JP92F*81 12662.00 25JP92N*81 9329.0016 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overloadamp range for the FLA’s (per the National ElectricCode) of typical industrial motors. All starter sizescarry one maximum Hp rating. Dual voltage coils not available in modified starters orin starter sizes 5–8.Discount Schedule NEMA For conduit hubs and conversion instructions, seepage 16-87. For 60A disconnect, order fusible cat. no. For 25HP and 200A disconnect, order fusible cat. no. For 30HP and 200A disconnect, order fusible cat. no. For 600A disconnect, order fusible cat. no. Enclosure is NEMA Type 4 (painted steel). F coil 100-250V AC 50/60Hz, or DC,H coil 150-500V AC 50/60Hz, or DC Only availableF coil 100-250V AC 50/60Hz, or DCSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-29

Combination Reversing Heavy Duty StartersMCP Type, Class 26SelectionOrdering InformationCoil Table16CONTROLPRODUCTSNEMA & GeneralPurpose ControlStandard Width Enclosure with Solid State Overload, 3-Phase, 3-PoleMax HpNote: Hp’s shown above are based on the overload Dual voltage coils not available in modified starters oramp range for the FLA’s (per the National Electric in starter sizes 5–8.Code) of typical industrial motors. All starter sizes For conduit hubs and conversion instructions, seecarry one maximum Hp rating.page 16-87. Enclosure is NEMA Type 4 (painted steel).Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog16-30 Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Heater elements see page 16-148. (3 required) Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-122. Wiring Diagrams see page 16-133. Replacement Parts see page 16-155.Enclosure60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.NEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9 NEMA 12 General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3 & 4 NEMA 3/3RCorrosion Resistant Corrosion Resistant Div I and Div 2304 Stainless Steel Class I Groups C & DNEMA 4 Painted(thru Sz 4)Class II Groups E, F & G Industrial Use,Class IIIWeatherproof,Bolted Enclosure Watertight,Dust-tightOverload Motor Interrupter Indoor/Outdoor Use200 230 460 575 NEMA Half Amp Circuit Catalog List Catalog List Catalog List Catalog List Catalog ListVolts Volts Volts Volts Size Size Range ETI Amps Number Price $ Number Price $ Number Price $ Number Price $ Number Price $1⁄2 1⁄2 1 1 0 — 0.75–3 3 26CSB92B* 1581.00 26CSB92W* 2632.00 26CSB92F* 2896.00 26CSB92H* 3241.00 26CSB92N* 1874.002 2 5 5 0 — 2.5–10 10 26CSD92B* 1581.00 26CSD92W* 2632.00 26CSD92F* 2896.00 26CSD92H* 3241.00 26CSD92N* 1874.003 3 — — 0 — 9–18 25 26CSE92B* 1581.00 26CSE92W* 2632.00 26CSE92F* 2896.00 26CSE92H* 3241.00 26CSE92N* 1874.001⁄2 1⁄2 1 1 1 — 0.75–3 3 26DSB92B* 1684.00 26DSB92W* 2735.00 26DSB92F* 3009.00 26DSB92H* 3358.00 26DSB92N* 1977.002 2 5 5 1 — 2.5–10 10 26DSD92B* 1684.00 26DSD92W* 2735.00 26DSD92F* 3009.00 26DSD92H* 3358.00 26DSD92N* 1977.003 3 7 1 ⁄2 10 1 — 9–18 25 26DSE92B* 1684.00 26DSE92W* 2735.00 26DSE92F* 3009.00 26DSE92H* 3358.00 26DSE92N* 1977.007 1 ⁄2 7 1 ⁄2 10 — 1 — 13–27 30 26DSF92B* 1684.00 26DSF92W* 2735.00 26DSF92F* 3009.00 26DSF92H* 3358.00 26DSF92N* 1977.00— — 15 15 — 1 3 ⁄4 13–27 40 26ESF92B* 1942.00 26ESF92W* 2994.00 26ESF92F* 3293.00 26ESF92H* 3488.00 26ESF92N* 2235.0010 10 — — — 1 3 ⁄4 20–40 50 26ESG92B* 1942.00 26ESG92W* 2994.00 26ESG92F* 3293.00 26ESG92H* 3488.00 26ESG92N* 2235.00— — 15 20 2 — 13–27 40 26FSF92B* 2666.00 26FSF92W* 4268.00 26FSF92F* 4696.00 26FSF92H* 4970.00 26FSF92N* 3045.0010 15 25 25 2 — 22–45 50 26FSH92B* 2666.00 26FSH92W* 4268.00 26FSH92F* 4696.00 26FSH92H* 4970.00 26FSH92N* 3045.00— — 30 30 — 2 1 ⁄2 22–45 50 26GSH92B* 3493.00 26GSH92W* 6301.00 26GSH92F* 6932.00 26GSH92H* 5159.00 26GSH92N* 3993.0015 20 — — — 2 1 ⁄2 30–60 100 26GSJ92B* 3493.00 26GSJ92W* 6301.00 26GSJ92F* 6932.00 26GSJ92H* 5159.00 26GSJ92N* 3993.00— — 30 30 3 — 30–60 50 26HSJ92B* 3968.00 26HSJ92W* 6776.00 26HSJ92F* 7453.00 26HSJ92H* 8265.00 26HSJ92N* 4468.0025 30 50 50 3 — 45–90 100 26HSK92B* 3968.00 26HSK92W* 6776.00 26HSK92F* 7453.00 26HSK92H* 8265.00 26HSK92N* 4468.0030 40 75 75 — 3 1 ⁄2 57–115 125 26ISL92B* 8250.00 26ISL92W* 11799.00 26ISL92F* 12979.00 26ISL92H* 11804.00 26ISL92N* 9619.0040 50 100 100 4 — 67–135 150 26JTM92B* 8939.00 26JTM92W* 12488.00 26JTM92F* 13736.00 26JTM92H* 15846.00 26JTM92N* 10308.0050 75 150 200 5 — 55–250 250 26LPT92B* 18065.00 26LPT92E* 27129.00 — — — — 26LPT92N* 21321.0075 100 200 — 5 — 55–250 400 26LPU92B* 18065.00 26LPU92E* 27129.00 — — — — 26LPU92N* 21321.00100 125 250 300 6 — 160–540 400 26MPW92B* 38646.00 26MPW92E* 43182.00 — — — — 26MPW92N* 41163.00150 200 400 400 6 — 160–540 600 26MPX92B* 38646.00 26MPX92E* 43182.00 — — — — 26MPX92N* 41163.00— 250 500 500 7 — 420–820 800 26NHV92B* 52418.00 — — — — — — 26NHV92N* 54934.00— 300 600 600 7 — 420–820 1000 26NHY92B* 52418.00 — — — — — — 26NHY92N* 54934.00— 400 800 800 8 — 420–1220 1200 26PHZ92B* 77979.00 — — — — — — 26PHZ92N* 80305.00— 450 900 900 8 — 420–1220 1600 26PH192B* 77979.00 — — — — — — 26PH192N* 80305.00Standard Width Enclosure with Ambient Compensated Bimetal Overload, 3-Phase, 3-Pole1⁄2 1⁄2 1 1 0 — 18 3 26CP92BA*81 1542.00 26CP92WA*81 2594.00 26CP92FA*81 2853.00 26CP92HA*81 3204.00 26CP92NA*81 1835.001 1 3 3 0 — 18 10 26CP92BB*81 1542.00 26CP92WB*81 2594.00 26CP92FB*81 2853.00 26CP92HB*81 3204.00 26CP92NB*81 1835.003 3 5 5 0 — 18 25 26CP92BC*81 1542.00 26CP92WC*81 2594.00 26CP92FC*81 2853.00 26CP92HC*81 3204.00 26CP92NC*81 1835.001⁄2 1⁄2 1 1 1 — 27 3 26DP92BA*81 1645.00 26DP92WA*81 2696.00 26DP92FA*81 2966.00 26DP92HA*81 3320.00 26DP92NA*81 1938.001 1 3 3 1 — 27 10 26DP92BB*81 1645.00 26DP92WB*81 2696.00 26DP92FB*81 2966.00 26DP92HB*81 3320.00 26DP92NB*81 1938.003 3 7 1 ⁄2 7 1 ⁄2 1 — 27 25 26DP92BD*81 1645.00 26DP92WD*81 2696.00 26DP92FD*81 2966.00 26DP92HD*81 3320.00 26DP92ND*81 1938.007 1 ⁄2 7 1 ⁄2 10 10 1 — 27 30 26DP92BE*81 1645.00 26DP92WE*81 2696.00 26DP92FE*81 2966.00 26DP92HE*81 3320.00 26DP92NE*81 1938.00— — 15 15 — 1 3 ⁄4 40 40 26EP92BF*81 1905.00 26EP92WF*81 2955.00 26EP92FF*81 3251.00 26EP92HF*81 3448.00 26EP92NF*81 2198.0010 10 — — — 1 3 ⁄4 40 50 26EP92BG*81 1905.00 26EP92WG*81 2955.00 26EP92FG*81 3251.00 26EP92HG*81 3448.00 26EP92NG*81 2198.00— — 20 20 2 — 45 40 26FP92BH*81 2628.00 26FP92WH*81 4230.00 26FP92FH*81 4655.00 26FP92HH*81 4931.00 26FP92NH*81 3007.0010 15 25 25 2 — 45 50 26FP92BJ*81 2628.00 26FP92WJ*81 4230.00 26FP92FJ*81 4655.00 26FP92HJ*81 4931.00 26FP92NJ*81 3007.0010 15 30 30 — 2 1 ⁄2 60 50 26GP92BK*81 3454.00 26GP92WK*81 6263.00 26GP92FK*81 6891.00 26GP92HK*81 7752.00 26GP92NK*81 3954.0015 20 — — — 2 1 ⁄2 60 100 26GP92BL*81 3454.00 26GP92WL*81 6263.00 26GP92FL*81 6891.00 26GP92HL*81 7752.00 26GP92NL*81 3954.00— — 30 30 3 — 90 50 26HP92BM*81 3928.00 26HP92WM*81 6738.00 26HP92FM*81 7412.00 26HP92HM*81 8226.00 26HP92NM*81 4428.0025 30 50 50 3 — 90 100 26HP92BN*81 3928.00 26HP92WN*81 6738.00 26HP92FN*81 7412.00 26HP92HN*81 8226.00 26HP92NN*81 4428.0030 40 75 75 — 3 1 ⁄2 115 125 26IP92BP*81 8210.00 26IP92WP*81 11760.00 26IP92FP*81 12936.00 26IP92HP*81 13378.00 26IP92NP*81 9580.0040 50 100 100 4 — 135 150 26JP92BR*81 8899.00 26JP92WR*81 12449.00 26JP92FR*81 13694.00 26JP92HR*81 15808.00 26JP92NR*81 10269.00 F coil 100-250V AC 50/60Hz, or DC,H coil 150-500V AC 50/60Hz, or DC Only availableF coil 100-250V AC 50/60Hz, or DCDiscount Schedule NEMA

Two Speed Heavy Duty StartersFeatures and BenefitsFeatures▪ Rugged Industrial Design▪ Dual Voltage, Dual Frequency Coils▪ Compact Design▪ Snap-On Front Removable AuxiliaryContacts▪ Electrical and Mechanical Interlocks▪ Half Sizes — Space and Cost Savings▪ Industrial Type DisconnectOperating Handle▪ Visible Blade Disconnect Thru Size 4▪ Adjustable Motor Circuit Protector▪ 100,000 Amp Fault Protection withMCP or Class R Fuses▪ Pilot Device Locations identifiedon All Enclosures▪ UL Listed File #E14900▪ CSA Certified File #LR6535ApplicationsMulti-speed magnetic startersautomatically reconnect multi-speedmotor windings for the desired speed inresponse to a signal received from pushbutton stations or other pilot devices.These starters are available for twospeed motors.Consequent Pole multi-speed motorshaving two speeds on a single winding(consequent pole) require a starterwhich reconnects the motor leads tohalf the number of effective motorpoles at the high speed point. In thistype of motor, the low speed is onehalf the high speed.Separate Windings motors havingseparate windings for each speedprovide more varied speedcombinations in that the low speedneed not be one half the high speed.Starters for separate windingmotors consist of a starter unitfor each speed.Multi-speed motor starters are availablefor constant torque, variable torque andconstant horsepower motors.Constant Torque motors maintainconstant torque at all speeds.Horsepower varies directly with speed.This type of motor is applicable toconveyors, mills and similarapplications.Variable Torque motors produce atorque characteristic which varies asthe square of the speed. This type ofmotor is applicable to fans, blowersand centrifugal pumps.Constant Horsepower motorsmaintain constant horsepower at allspeeds and therefore torque variesinversely with speed. This type ofmotor is applicable where the samehorsepower is required at all speeds.The higher current required atlow speed requires derating onstarters for constant horsepowerapplications. This type of motor isapplicable to metal working machinessuch as drills, lathes, mills, bendingmachines, punch presses, and powerwrenches.OperationMagnetic starters for multi-speedapplications select the desired speedin accordance with the pilot control.The shock to machinery upon thereduction of speed is greater than whenthe speed is increased. Therefore, thepilot control should be wired so that thestop button must be depressed beforedropping to a lower speed or timedelays should be used for applicationsrequiring full automatic operations. Themulti-speed controls are available withthe necessary interlocks or relays toprovide this type of operation.These controls may be modified forcompelling or acceleration pilot control.Selective Control permits theoperator to start the motor at any speedand to change to a higher speed bymerely pushing a button. To change toa lower speed it is necessary to firstdepress the stop button and to thenpress the proper speed button.Selective control is a function of thepilot control selected and requires nostarter modifications.Internal View of NEMA 1 EnclosureSz 2 2S2W starter with CPT(ESP 100 Overload)GeneralCompelling Control requires that themotor always be started at the lowerspeed and that the push buttons beoperated in speed sequence to go tothe next higher speed. To change to alower speed, the stop button must bedepressed and then the push buttonsoperated in speed sequence until thedesired speed is reached. Compellingcontrol can be added from the factorymodification section page 16-98.Acceleration Control provides thatthe motor be accelerated automaticallywith timers by progressively energizingthe controls from the push buttonstation from the lowest to highestspeed. To change to a lower speed thestop button is depressed and then it isnecessary to proceed as if starting fromrest. Acceleration control can be addedfrom the factory modification sectionpage 16-98.Deceleration Control provides thatthe motor be decelerated automaticallywith a timer when going from highspeed to low speed. The timer allowsthe motor to decelerate from highspeed to a lower speed beforeautomatically restarting the motor inlow speed. Deceleration control can beadded from the factory modificationsection page16-98.Open Style Two Speed Starter(ESP100 Overload)Open Style Two Speed Starter(Ambient Compensated Overload)16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-31

Two Speed Heavy Duty StartersConstant or Variable Torque with Solid Overload, Class 30Selection2S2W starter( ESP 100 Overload)Ordering Information Replace the (*) with a letter fromthe coil table. Dual voltage coilsare wired on high voltage unlessspecified on order. Replace the (†) with the letter thatcorresponds to the correct lowspeed FLA in the FLA table. Field Modification Kits see page16-79. Factory Modifications see page 16-94. Dimensions see pages 16-104 openand 16-123 enclosed. Wiring Diagrams see page 16-134. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.Low Speed FLA TableSize FLA †0,1 0.25–1 A0,1 0.75–3 B0,1 2.5–10 D0–1 3 /4 9–18 E1–4 13–27 F1 3 /4 20–40 G2–4 22–45 H2 1 /2–4 30–60 J3–4 45–90 K3 1 /2–4 57–115 L4 67–135 MOne Winding Consequent Pole, 3-Phase (Constant or Variable Torque)Max HpEnclosure16CONTROLPRODUCTSNEMA & GeneralPurpose ControlOpen Type NEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12 General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3/3ROverload Corrosion Resistant Corrosion Resistant Industrial Use200 230 460 575 NEMA Half Amp304 Stainless Steel WeatherproofVolts Volts Volts Volts Size Size Range Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $1⁄23⁄4 1 1 ⁄2 1 1 ⁄2 0 — 0.75–3 30CSB†32A2V* 1370.00 30CSB†32B2V* 1405.00 30CSB†32W2V* 2231.00 30CSB†32F2V* 2455.00 30CSB†3202V* 1672.002 2 5 5 0 — 2.5–10 30CSD†32A2V* 1370.00 30CSD†32B2V* 1405.00 30CSD†32W2V* 2231.00 30CSD†32F2V* 2455.00 30CSD†3202V* 1672.003 3 — — 0 — 9–18 30CSE†32A2V* 1370.00 30CSE†32B2V* 1405.00 30CSE†32W2V* 2231.00 30CSE†32F2V* 2455.00 30CSE†3202V* 1672.001 1 ⁄2 1 3 ⁄4 1 1 ⁄2 1 1 ⁄2 1 — 0.75–3 30DSB†32A2V* 1456.00 30DSB†32B2V* 1508.00 30DSB†32W2V* 2317.00 30DSB†32F2V* 2549.00 30DSB†3202V* 1774.002 2 5 5 1 — 2.5–10 30DSD†32A2V* 1456.00 30DSD†32B2V* 1508.00 30DSD†32W2V* 2317.00 30DSD†32F2V* 2549.00 30DSD†3202V* 1774.003 3 10 10 1 — 9–18 30DSE†32A2V* 1456.00 30DSE†32B2V* 1508.00 30DSE†32W2V* 2317.00 30DSE†32F2V* 2549.00 30DSE†3202V* 1774.007 1 ⁄2 7 1 ⁄2 — — 1 — 13–27 30DSF†32A2V* 1456.00 30DSF†32B2V* 1508.00 30DSF†32W2V* 2317.00 30DSF†32F2V* 2549.00 30DSF†3202V* 1774.00— — 15 15 — 1 3 ⁄4 13–27 30ESF†32A2V* 1844.00 30ESF†32B2V* 1895.00 30ESF†32W2V* 2705.00 30ESF†32F2V* 2976.00 30ESF†3202V* 2163.0010 10 — — — 1 3 ⁄4 20–40 30ESG†32A2V* 1844.00 30ESG†32B2V* 1895.00 30ESG†32W2V* 2705.00 30ESG†32F2V* 2976.00 30ESG†3202V* 2163.00— — 15 15 2 — 13–27 30FSF†32A2V* 2524.00 30FSF†32B2V* 2680.00 30FSF†32W2V* 3679.00 30FSF†32F2V* 4047.00 30FSF†3202V* 3059.0010 15 25 25 2 — 22–45 30FSH†32A2V* 2524.00 30FSH†32B2V* 2680.00 30FSH†32W2V* 3679.00 30FSH†32F2V* 4047.00 30FSH†3202V* 3059.00— — 30 30 — 2 1 ⁄2 22–45 30GSH†32A2V* 3145.00 30GSH†32B2V* 3342.00 30GSH†32W2V* 4600.00 30GSH†32F2V* 5061.00 30GSH†3202V* 3963.0015 20 — — — 2 1 ⁄2 30–60 30GSJ†32A2V* 3145.00 30GSJ†32B2V* 3342.00 30GSJ†32W2V* 4600.00 30GSJ†32F2V* 5061.00 30GSJ†3202V* 3963.00— — 40 40 3 — 30–60 30HSJ†32A2V* 3765.00 30HSJ†32B2V* 4006.00 30HSJ†32W2V* 5487.00 30HSJ†32F2V* 6036.00 30HSJ†3202V* 4868.0025 30 50 50 3 — 45–90 30HSK†32A2V* 3765.00 30HSK†32B2V* 4006.00 30HSK†32W2V* 5487.00 30HSK†32F2V* 6036.00 30HSK†3202V* 4868.0030 40 75 75 — 3 1 ⁄2 57–115 30ISL†32A2V* 8589.00 30ISL†32B2V* 9536.00 30ISL†32W2V* 12570.00 30ISL†32F2V* 13826.00 30ISL†3202V* 11243.0040 50 100 100 4 — 67–135 30JTM†32A2V* 9622.00 30JTM†32B2V* 10570.00 30JTM†32W2V* 13604.00 30JTM†32F2V* 14965.00 30JTM†3202V* 12277.00Two Separate Windings, 3-Phase (Constant or Variable Torque)Max HpEnclosureOpen Type NEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12 General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3/3ROverload Corrosion Resistant Corrosion Resistant Industrial Use200 230 460 575 NEMA Half Amp304 Stainless Steel WeatherproofVolts Volts Volts Volts Size Size Range Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $1⁄2 3⁄4 1 1 ⁄2 1 1 ⁄2 0 — 0.75–3 30CSB†32A1V* 991.00 30CSB†32B1V* 1026.00 30CSB†32W1V* 1852.00 30CSB†32F1V* 2037.00 30CSB†3201V* 1293.002 2 5 5 0 — 2.5–10 30CSD†32A1V* 991.00 30CSD†32B1V* 1026.00 30CSD†32W1V* 1852.00 30CSD†32F1V* 2037.00 30CSD†3201V* 1293.003 3 — — 0 — 9–18 30CSE†32A1V* 991.00 30CSE†32B1V* 1026.00 30CSE†32W1V* 1852.00 30CSE†32F1V* 2037.00 30CSE†3201V* 1293.001 1 ⁄2 1 3 ⁄4 1 1 ⁄2 1 1 ⁄2 1 — 0.75–3 30DSB†32A1V* 1094.00 30DSB†32B1V* 1147.00 30DSB†32W1V* 1956.00 30DSB†32F1V* 2151.00 30DSB†3201V* 1412.002 2 5 5 1 — 2.5–10 30DSD†32A1V* 1094.00 30DSD†32B1V* 1147.00 30DSD†32W1V* 1956.00 30DSD†32F1V* 2151.00 30DSD†3201V* 1412.003 3 10 10 1 — 9–18 30DSE†32A1V* 1094.00 30DSE†32B1V* 1147.00 30DSE†32W1V* 1956.00 30DSE†32F1V* 2151.00 30DSE†3201V* 1412.007 1 ⁄2 7 1 ⁄2 — — 1 — 13–27 30DSF†32A1V* 1094.00 30DSF†32B1V* 1147.00 30DSF†32W1V* 1956.00 30DSF†32F1V* 2151.00 30DSF†3201V* 1412.00— — 15 15 — 1 3 ⁄4 13–27 30ESF†32A1V* 1353.00 30ESF†32B1V* 1405.00 30ESF†32W1V* 2214.00 30ESF†32F1V* 2436.00 30ESF†3201V* 1672.0010 10 — — — 1 3 ⁄4 20–40 30ESG†32A1V* 1353.00 30ESG†32B1V* 1405.00 30ESG†32W1V* 2214.00 30ESG†32F1V* 2436.00 30ESG†3201V* 1672.00— — 15 15 2 — 13–27 30FSF†32A1V* 1852.00 30FSF†32B1V* 1991.00 30FSF†32W1V* 3007.00 30FSF†32F1V* 3308.00 30FSF†3201V* 2370.0010 15 25 25 2 — 22–45 30FSH†32A1V* 1852.00 30FSH†32B1V* 1991.00 30FSH†32W1V* 3007.00 30FSH†32F1V* 3308.00 30FSH†3201V* 2370.00— — 30 30 — 2 1 ⁄2 22–45 30GSH†32A1V* 2343.00 30GSH†32B1V* 2533.00 30GSH†32W1V* 3782.00 30GSH†32F1V* 4161.00 30GSH†3201V* 3153.0015 20 30 30 — 2 1 ⁄2 30–60 30GSJ†32A1V* 2343.00 30GSJ†32B1V* 2533.00 30GSJ†32W1V* 3782.00 30GSJ†32F1V* 4161.00 30GSJ†3201V* 3153.00— — 40 40 3 — 30–60 30HSJ†32A1V* 2835.00 30HSJ†32B1V* 3075.00 30HSJ†32W1V* 4557.00 30HSJ†32F1V* 5013.00 30HSJ†3201V* 3911.0025 30 50 50 3 — 45–90 30HSK†32A1V* 2835.00 30HSK†32B1V* 3075.00 30HSK†32W1V* 4557.00 30HSK†32F1V* 5013.00 30HSK†3201V* 3911.0030 40 75 75 — 3 1 ⁄2 57–115 30ISL†32A1V* 6298.00 30ISL†32B1V* 6745.00 30ISL†32W1V* 9778.00 30ISL†32F1V* 10756.00 30ISL†3201V* 8451.0040 50 100 100 4 — 67–135 30JTM†32A1V* 6987.00 30JTM†32B1V* 7435.00 30JTM†32W1V* 10466.00 30JTM†32F1V* 11513.00 30JTM†3201V* 9140.00Note: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating.16-32 For conduit hubs and conversion instructions, seepage 16-87. If motor FLA are unknown, select overload on thebasis that low speed FLA will be no greater than 50%of high speed FLA.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog Auxiliary contacts30C-30E 4th pole built-in30F-30J 2 NO & 2 NCDiscount Schedule NEMA

Two Speed Heavy Duty StartersConstant HP with Solid State Overload, Class 30Selection2S2W starter( ESP 100 Overload)Ordering Information Replace the (*) with a letter fromthe coil table. Dual voltage coilsare wired on high voltage unlessspecified on order. Replace the (†) with the letter thatcorresponds to the correct FLA inHigh/Low Speed FLA Table. Field Modification Kits see page16-79. Factory Modifications see page 16-94. Dimensions see pages 16-104open and 16-123 enclosed. Wiring Diagrams see page 16-134. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.High/Low Speed FLA Table Size FLA †0,1 0.25–1 A0,1 0.75–3 B0,1 2.5–10 D0–1 3 /4 9–18 E1–4 13–27 F1 3 /4 20–40 G2–4 22–45 H2 1 /2–4 30–60 J3–4 45–90 K3 1 /2–4 57–115 L4 67–135 MOne Winding Consequent Pole, 3-Phase (Constant Horsepower)Max HpEnclosureOpen Type NEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12 General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3/3ROverload Corrosion Resistant Corrosion Resistant Industrial Use200 230 460 575 NEMA Half Amp304 Stainless Steel WeatherproofVolts Volts Volts Volts Size Size Range Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $2 2 3 3 0 — — 30CS††32A2H* 1370.00 30CS††32B2H* 1405.00 30CS††32W2H* 2231.00 30CS††32F2H* 2455.00 30CS††3202H* 1672.005 5 7 1 ⁄2 7 1 ⁄2 1 — — 30DS††32A2H* 1456.00 30DS††32B2H* 1508.00 30DS††32W2H* 2317.00 30DS††32F2H* 2549.00 30DS††3202H* 1774.007 1 ⁄2 7 1 ⁄2 10 10 — 1 3 ⁄4 — 30ES††32A2H* 1844.00 30ES††32B2H* 1895.00 30ES††32W2H* 2705.00 30ES††32F2H* 2976.00 30ES††3202H* 2163.007 1 ⁄2 10 20 20 2 — — 30FS††32A2H* 2524.00 30FS††32B2H* 2680.00 30FS††32W2H* 3679.00 30FS††32F2H* 4047.00 30FS††3202H* 3059.0010 15 25 25 — 2 1 ⁄2 — 30GS††32A2H* 3145.00 30GS††32B2H* 3342.00 30GS††32W2H* 4600.00 30GS††32F2H* 5061.00 30GS††3202H* 3963.0020 25 40 40 3 — — 30HS††32A2H* 3765.00 30HS††32B2H* 4006.00 30HS††32W2H* 5487.00 30HS††32F2H* 6036.00 30HS††3202H* 4868.0025 30 50 50 — 3 1 ⁄2 — 30IS††32A2H* 8589.00 30IS††32B2H* 9536.00 30IS††32W2H* 12570.00 30IS††32F2H* 13826.00 30IS††3202H* 11243.0030 40 75 75 4 — — 30JT††32A2H* 9622.00 30JT††32B2H* 10570.00 30JT††32W2H* 13604.00 30JT††32F2H* 14965.00 30JT††3202H* 12277.00Two Separate Windings, 3-Phase (Constant Horsepower)Max HpEnclosureOpen Type NEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12 General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3/3ROverload Corrosion Resistant Corrosion Resistant Industrial Use200 230 460 575 NEMA Half Amp304 Stainless Steel WeatherproofVolts Volts Volts Volts Size Size Range Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $2 2 3 3 0 — — 30CS††32A1H* 991.00 30CS††32B1H* 1026.00 30CS††32W1H* 1852.00 30CS††32F1H* 2037.00 30CS††3201H* 1293.005 5 7 1 ⁄2 7 1 ⁄2 1 — — 30DS††32A1H* 1094.00 30DS††32B1H* 1147.00 30DS††32W1H* 1956.00 30DS††32F1H* 2151.00 30DS††3201H* 1412.007 1 ⁄2 7 1 ⁄2 10 10 — 1 3 ⁄4 — 30ES††32A1H* 1353.00 30ES††32B1H* 1405.00 30ES††32W1H* 2214.00 30ES††32F1H* 2436.00 30ES††3201H* 1672.007 1 ⁄2 10 20 20 2 — — 30FS††32A1H* 1852.00 30FS††32B1H* 1991.00 30FS††32W1H* 3007.00 30FS††32F1H* 3308.00 30FS††3201H* 2370.0010 15 25 25 — 2 1 ⁄2 — 30GS††32A1H* 2343.00 30GS††32B1H* 2533.00 30GS††32W1H* 3782.00 30GS††32F1H* 4161.00 30GS††3201H* 3153.0020 25 40 40 3 — — 30HS††32A1H* 2835.00 30HS††32B1H* 3075.00 30HS††32W1H* 4557.00 30HS††32F1H* 5013.00 30HS††3201H* 3938.0025 30 50 50 — 3 1 ⁄2 — 30IS††32A1H* 6298.00 30IS††32B1H* 6745.00 30IS††32W1H* 9778.00 30IS††32F1H* 10756.00 30IS††3201H* 8451.0030 40 75 75 4 — — 30JT††32A1H* 6987.00 30JT††32B1H* 7435.00 30JT††32W1H* 10466.00 30JT††32F1H* 11513.00 30JT††3201H* 9140.0016 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating. For conduit hubs and conversion instructions, seepage 16-87. First (†) for high speed, second (†) for low speed. Usemotor nameplate information to select FLA. If motorFLA are unknown, select overload on the basis thatlow speed FLA will be no greater than 50% of highspeed FLA. Auxiliary contacts30C-30E 4th pole built-in30F-30J 2 NO & 2 NCDiscount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-33

Two Speed Heavy Duty StartersConstant or Variable Torque with Ambient Compensated Bimetal Overload, Class 30SelectionOrdering InformationCoil Table2S2W starter(Amb. Comp. Bimetal OL) Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Heater elements see page 16-148 (6 required) Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see pages 16-104 open and 16-123 enclosed. Wiring Diagrams see page 16-134. Replacement Parts see page 16-155.60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.One Winding Consequent Pole, 3 Phase (Constant or Variable Torque)Max HpEnclosureOpen Type NEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12 Cont- General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3/3Ractor Corrosion Resistant Corrosion Resistant Industrial Use200 230 460 575 Amp NEMA Half304 Stainless Steel WeatherproofVolts Volts Volts Volts Rating Size Size Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $3 3 5 5 18 0 — 30CP32A2V*81 1293.00 30CP32B2V*81 1326.00 30CP32W2V*81 2154.00 30CP32F2V*81 2370.00 30CP3202V*81 1594.007 1 ⁄2 7 1 ⁄2 10 10 27 1 — 30DP32A2V*81 1379.00 30DP32B2V*81 1430.00 30DP32W2V*81 2240.00 30DP32F2V*81 2464.00 30DP3202V*81 1698.0010 10 15 15 40 — 1 3 ⁄4 30EP32A2V*81 1766.00 30EP32B2V*81 1819.00 30EP32W2V*81 2628.00 30EP32F2V*81 2891.00 30EP3202V*81 2084.0010 15 25 25 45 2 — 30FP32A2V*81 2446.00 30FP32B2V*81 2602.00 30FP32W2V*81 3600.00 30FP32F2V*81 3961.00 30FP3202V*81 2981.0015 20 30 30 60 — 2 1 ⁄2 30GP32A2V*81 3067.00 30GP32B2V*81 3266.00 30GP32W2V*81 4523.00 30GP32F2V*81 4976.00 30GP3202V*81 3886.0025 30 50 50 90 3 — 30HP32A2V*81 3687.00 30HP32B2V*81 3928.00 30HP32W2V*81 5410.00 30HP32F2V*81 5951.00 30HP3202V*81 4789.0030 40 75 75 115 — 3 1 ⁄2 30IP32A2V*81 8512.00 30IP32B2V*81 9459.00 30IP32W2V*81 12492.00 30IP32F2V*81 13742.00 30IP3202V*81 11165.0040 50 100 100 135 4 — 30JG32A2V*81 9546.00 30JG32B2V*81 11211.00 30JG32W2V*81 13525.00 30JG32F2V*81 14878.00 30JG3202V*81 12199.0016CONTROLPRODUCTSNEMA & GeneralPurpose ControlTwo Separate Windings, 3-Phase (Constant or Variable Torque)Max HpEnclosureOpen Type NEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12 Cont- General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3/3Ractor Corrosion Resistant Corrosion Resistant Industrial Use200 230 460 575 Amp NEMA Half 304 Stainless Steel WeatherproofVolts Volts Volts Volts Rating Size Size Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $3 3 5 5 18 0 — 30CP32A1V*81 914.00 30CP32B1V*81 947.00 30CP32W1V*81 1774.00 30CP32F1V*81 1952.00 30CP3201V*81 1215.007 1 ⁄2 7 1 ⁄2 10 10 27 1 — 30DP32A1V*81 1016.00 30DP32B1V*81 1068.00 30DP32W1V*81 1877.00 30DP32F1V*81 2065.00 30DP3201V*81 1336.0010 10 15 15 40 — 1 3 ⁄4 30EP32A1V*81 1275.00 30EP32B1V*81 1326.00 30EP32W1V*81 2137.00 30EP32F1V*81 2352.00 30EP3201V*81 1594.0010 15 25 25 45 2 — 30FP32A1V*81 1774.00 30FP32B1V*81 1912.00 30FP32W1V*81 2928.00 30FP32F1V*81 3221.00 30FP3201V*81 2291.0015 20 30 30 60 — 2 1 ⁄2 30GP32A1V*81 2266.00 30GP32B1V*81 2456.00 30GP32W1V*81 3704.00 30GP32F1V*81 4076.00 30GP3201V*81 3075.0025 30 50 50 90 3 — 30HP32A1V*81 2756.00 30HP32B1V*81 2998.00 30HP32W1V*81 4479.00 30HP32F1V*81 4928.00 30HP3201V*81 3859.0030 40 75 75 115 — 3 1 ⁄2 30IP32A1V*81 6220.00 30IP32B1V*81 6669.00 30IP32W1V*81 9701.00 30IP32F1V*81 10671.00 30IP3201V*81 8374.0040 50 100 100 135 4 — 30JG32A1V*81 6910.00 30JG32B1V*81 7357.00 30JG32W1V*81 10390.00 30JG32F1V*81 11429.00 30JG3201V*81 9064.00Note: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating. For conduit hubs and conversion instructions,see page 16-87. If motor FLA are unknown, select heater elements onthe basis that low speed FLA will be no greater than50% of high speed FLA. Auxiliary contacts30C-30E 4th pole built-in30F-30J 2 NO & 2 NC16-34Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Two Speed Heavy Duty StartersConstant HP with Ambient Compensated Bimetal Overload, Class 30SelectionOrdering InformationCoil Table2S2W starter(Amb. Comp. Bimetal OL) Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Heater elements see page 16-148 (6 required) . Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see pages 16-104 open and 16-123 enclosed. Wiring Diagrams see page 16-134. Replacement Parts see page 16-155.60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.One Winding Consequent Pole, 3-Phase (Constant Horsepower)Max HpEnclosureOpen Type NEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12 Cont- General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3/3Ractor Corrosion Resistant Corrosion Resistant Industrial Use200 230 460 575 Amp NEMA Half304 Stainless Steel WeatherproofVolts Volts Volts Volts Rating Size Size Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $2 2 3 3 18 0 — 30CP32A2H*81 1293.00 30CP32B2H*81 1326.00 30CP32W2H*81 2154.00 30CP32F2H*81 2370.00 30CP3202H*81 1594.005 5 7 1 ⁄2 7 1 ⁄2 27 1 — 30DP32A2H*81 1379.00 30DP32B2H*81 1430.00 30DP32W2H*81 2240.00 30DP32F2H*81 2464.00 30DP3202H*81 1698.007 1 ⁄2 7 1 ⁄2 10 10 40 — 1 3 ⁄4 30EP32A2H*81 1766.00 30EP32B2H*81 1819.00 30EP32W2H*81 2628.00 30EP32F2H*81 2891.00 30EP3202H*81 2084.007 1 ⁄2 10 20 20 45 2 — 30FP32A2H*81 2446.00 30FP32B2H*81 2602.00 30FP32W2H*81 3600.00 30FP32F2H*81 3961.00 30FP3202H*81 2981.0010 15 25 25 60 — 2 1 ⁄2 30GP32A2H*81 3067.00 30GP32B2H*81 3266.00 30GP32W2H*81 4523.00 30GP32F2H*81 4976.00 30GP3202H*81 3886.0020 25 40 40 90 3 — 30HP32A2H*81 3687.00 30HP32B2H*81 3928.00 30HP32W2H*81 5410.00 30HP32F2H*81 5951.00 30HP3202H*81 4789.0025 30 50 50 115 — 3 1 ⁄2 30IP32A2H*81 8512.00 30IP32B2H*81 9459.00 30IP32W2H*81 12492.00 30IP32F2H*81 13742.00 30IP3202H*81 11165.0030 40 75 75 135 4 — 30JG32A2H*81 9546.00 30JG32B2H*81 10493.00 30JG32W2H*81 13525.00 30JG32F2H*81 14878.00 30JG3202H*81 12199.00Two Separate Windings, 3-Phase (Constant Horsepower)Max HpEnclosureOpen Type NEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12 Cont- General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3/3Ractor Corrosion Resistant Corrosion Resistant Industrial Use200 230 460 575 Amp NEMA Half304 Stainless Steel WeatherproofVolts Volts Volts Volts Rating Size Size Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $2 2 3 3 18 0 — 30CP32A1H*81 914.00 30CP32B1H*81 947.00 30CP32W1H*81 1774.00 30CP32F1H*81 1952.00 30CP3201H*81 1215.005 5 7 1 ⁄2 7 1 ⁄2 27 1 — 30DP32A1H*81 1016.00 30DP32B1H*81 1068.00 30DP32W1H*81 1877.00 30DP32F1H*81 2065.00 30DP3201H*81 1336.007 1 ⁄2 7 1 ⁄2 10 10 40 — 1 3 ⁄4 30EP32A1H*81 1275.00 30EP32B1H*81 1068.00 30EP32W1H*81 2137.00 30EP32F1H*81 2352.00 30EP3201H*81 1594.007 1 ⁄2 10 20 20 45 2 — 30FP32A1H*81 1774.00 30FP32B1H*81 1912.00 30FP32W1H*81 2928.00 30FP32F1H*81 3221.00 30FP3201H*81 2291.0010 15 25 25 60 — 2 1 ⁄2 30GP32A1H*81 2266.00 30GP32B1H*81 2456.00 30GP32W1H*81 3704.00 30GP32F1H*81 4076.00 30GP3201H*81 3075.0020 25 40 40 90 3 — 30HP32A1H*81 2756.00 30HP32B1H*81 2998.00 30HP32W1H*81 4479.00 30HP32F1H*81 4928.00 30HP3201H*81 3859.0025 30 50 50 115 — 3 1 ⁄2 30IP32A1H*81 6220.00 30IP32B1H*81 6669.00 30IP32W1H*81 9701.00 30IP32F1H*81 10671.00 30IP3201H*81 8374.0030 40 75 75 135 4 — 30JG32A1H*81 6910.00 30JG32B1H*81 7357.00 30JG32W1H*81 10390.00 30JG32F1H*81 11429.00 30JG3201H*81 9064.0016 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating. For conduit hubs and conversion instructions,see page 16-87. If motor FLA are unknown, select heater element onthe basis that low speed FLA will be no greater than50% of high speed FLA. Auxiliary contacts30C-30E 4th pole built-in30F-30J 2 NO & 2 NCDiscount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-35

Combination Two Speed Heavy Duty StartersNon-Fusible, Constant or Variable Torque with Solid Overload, Class 32SelectionOrdering Information Replace the (*) with a letter fromthe coil table. Dual voltage coilsare wired on high voltage unlessspecified on order. Replace the (†) with the letter thatcorresponds to the correct lowspeed FLA in the FLA table. Fuse clips see page 16-95. Field Modification Kits see page16-79. Factory Modifications see page16-94. Dimensions see page 16-124. Wiring Diagrams see page 16-134. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.Low Speed FLA TableSize FLA †0,1 0.25–1 A0,1 0.75–3 B0,1 2.5–10 D0–1 3 /4 9–18 E1–4 13–27 F1 3 /4 20–40 G2–4 22–45 H2 1 /2–4 30–60 J3–4 45–90 K3 1 /2–4 57–115 L4 67–135 M16CONTROLPRODUCTSNEMA & GeneralPurpose ControlOne Winding Consequent Pole, 3-Phase (Constant or Variable Torque)Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedCorrosion Resistant Corrosion Resistant Industrial UseOverload Disc304 Stainless Steel Weatherproof200 230 460 575 NEMA Half Amp Amp Watertight, Dust-tightVolts Volts Volts Volts Size Size Range Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $1⁄2 3⁄4 1 1 ⁄2 2 0 — 0.75–3 30 32CSB†92B2V2* 2214.00 32CSB†92W2V2* 3541.00 32CSB†92F2V2* 3894.00 32CSB†92N2V2* 2498.002 2 5 5 0 — 2.5–10 30 32CSD†92B2V2* 2214.00 32CSD†92W2V2* 3541.00 32CSD†92F2V2* 3894.00 32CSD†92N2V2* 2498.003 3 — — 0 — 9–18 30 32CSE†92B2V2* 2214.00 32CSE†92W2V2* 3541.00 32CSE†92F2V2* 3894.00 32CSE†92N2V2* 2498.001 1 ⁄2 1 3 ⁄4 1 1 ⁄2 2 1 — 0.75–3 30 32DSB†92B2V2* 2317.00 32DSB†92W2V2* 3645.00 32DSB†92F2V2* 4009.00 32DSB†92N2V2* 2602.002 2 5 5 1 — 2.5–10 30 32DSD†92B2V2* 2317.00 32DSB†92W2V2* 3645.00 32DSB†92F2V2* 4009.00 32DSD†92N2V2* 2602.003 3 10 10 1 — 9–18 30 32DSE†92B2V2* 2317.00 32DSE†92W2V2* 3645.00 32DSE†92F2V2* 4009.00 32DSE†92N2V2* 2602.007 1 ⁄2 7 1 ⁄2 — — 1 — 13–27 60 32DSF†92B2V2* 2317.00 32DSF†92W2V2* 3645.00 32DSF†92F2V2* 4009.00 32DSF†92N2V2* 2602.00— — 15 15 — 1 3 ⁄4 13–27 60 32ESF†92B2V2* 2928.00 32ESF†92W2V2* 4256.00 32ESF†92F2V2* 4682.00 32ESF†92N2V2* 3214.0010 10 — — — 1 3 ⁄4 20–40 60 32ESG†92B2V2* 2928.00 32ESG†92W2V2* 4256.00 32ESG†92F2V2* 4682.00 32ESG†92N2V2* 3214.00— — 15 15 2 — 13–27 60 32FSF†92B2V2* 3713.00 32FSF†92W2V2* 5368.00 32FSF†92F2V2* 5904.00 32FSF†92N2V2* 4161.0010 15 25 25 2 — 22–45 60 32FSH†92B2V2* 3713.00 32FSH†92W2V2* 5368.00 32FSH†92F2V2* 5904.00 32FSH†92N2V2* 4161.00— — 30 30 — 2 1 ⁄2 22–45 100 32GSH†92B2V2* 4652.00 32GSH†92W2V2* 6306.00 32GSH†92F2V2* 6936.00 32GSH†92N2V2* 5100.0015 20 — — — 2 1 ⁄2 30–60 100 32GSJ†92B2V2* 4652.00 32GSJ†92W2V2* 6306.00 32GSJ†92F2V2* 6936.00 32GSJ†92N2V2* 5100.00— — 40 40 3 — 30–60 100 32HSJ†92B2V2* 5315.00 32HSJ†92W2V2* 8141.00 32HSJ†92F2V2* 8955.00 32HSJ†92N2V2* 6298.0020 25 50 50 3 — 45–90 100 32HSK†92B2V2* 5315.00 32HSK†92W2V2* 8141.00 32HSK†92F2V2* 8955.00 32HSK†92N2V2* 6298.0030 40 75 75 — 3 1 ⁄2 57–115 200 32ISL†92B2V2* 11345.00 32ISL†92W2V2* 15791.00 32ISL†92F2V2* 17371.00 32ISL†92N2V2* 14086.0040 50 100 100 4 — 67–135 200 32JTM†92B2V2* 12381.00 32JTM†92W2V2* 16825.00 32JTM†92F2V2* 18508.00 32JTM†92N2V2* 15120.00Two Separate Windings, 3-Phase (Constant or Variable Torque)Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedCorrosion Resistant Corrosion Resistant Industrial UseOverload Disc304 Stainless Steel Weatherproof200 230 460 575 NEMA Half Amp Amp Watertight, Dust-tightVolts Volts Volts Volts Size Size Range Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $1⁄2 3⁄4 1 1 ⁄2 2 0 — 0.75–3 30 32CSB†92B1V2* 1835.00 32CSB†92W1V2* 3162.00 32CSB†92F1V2* 3478.00 32CSB†92N1V2* 2119.002 2 5 5 0 — 2.5–10 30 32CSD†92B1V2* 1835.00 32CSD†92W1V2* 3162.00 32CSD†92F1V2* 3478.00 32CSD†92N1V2* 2119.003 3 — — 0 — 9–18 30 32CSE†92B1V2* 1835.00 32CSE†92W1V2* 3162.00 32CSE†92F1V2* 3478.00 32CSE†92N1V2* 2119.001 1 ⁄2 1 3 ⁄4 1 1 ⁄2 2 1 — 0.75–3 30 32DSB†92B1V2* 1956.00 32DSB†92W1V2* 3282.00 32DSB†92F1V2* 3611.00 32DSB†92N1V2* 2240.002 2 5 5 1 — 2.5–10 30 32DSD†92B1V2* 1956.00 32DSD†92W1V2* 3282.00 32DSD†92F1V2* 3611.00 32DSD†92N1V2* 2240.003 3 10 10 1 — 9–18 30 32DSE†92B1V2* 1956.00 32DSE†92W1V2* 3282.00 32DSE†92F1V2* 3611.00 32DSE†92N1V2* 2240.007 1 ⁄2 7 1 ⁄2 — — 1 — 13–27 60 32DSF†92B1V2* 1956.00 32DSF†92W1V2* 3282.00 32DSF†92F1V2* 3611.00 32DSF†92N1V2* 2240.00— — 15 15 — 1 3 ⁄4 13–27 60 32ESF†92B1V2* 2438.00 32ESF†92W1V2* 3765.00 32ESF†92F1V2* 4142.00 32ESF†92N1V2* 2722.0010 10 — — — 1 3 ⁄4 20–40 60 32ESG†92B1V2* 2438.00 32ESG†92W1V2* 3765.00 32ESG†92F1V2* 4142.00 32ESG†92N1V2* 2722.00— — 15 15 2 — 13–27 60 32FSF†92B1V2* 3024.00 32FSF†92W1V2* 4678.00 32FSF†92F1V2* 5146.00 32FSF†92N1V2* 3472.0010 15 25 25 2 — 22–45 60 32FSH†92B1V2* 3024.00 32FSH†92W1V2* 4678.00 32FSH†92F1V2* 5146.00 32FSH†92N1V2* 3472.00— — 30 30 — 2 1 ⁄2 22–45 100 32GSH†92B1V2* 3842.00 32GSH†92W1V2* 5496.00 32GSH†92F1V2* 6046.00 32GSH†92N1V2* 4290.0015 20 — — — 2 1 ⁄2 30–60 100 32GSJ†92B1V2* 3842.00 32GSJ†92W1V2* 5496.00 32GSJ†92F1V2* 6046.00 32GSJ†92N1V2* 4290.00— — 40 40 3 — 30–60 100 32HSJ†92B1V2* 4388.00 32HSJ†92W1V2* 7210.00 32HSJ†92F1V2* 7932.00 32HSJ†92N1V2* 5368.0020 25 50 50 3 — 45–90 100 32HSK†92B1V2* 4388.00 32HSK†92W1V2* 7210.00 32HSK†92F1V2* 7932.00 32HSK†92N1V2* 5368.0030 40 75 75 — 3 1 ⁄2 57–115 200 32ISL†92B1V2* 8554.00 32ISL†92W1V2* 13000.00 32ISL†92F1V2* 14300.00 32ISL†92N1V2* 11294.0040 50 100 100 4 — 67–135 200 32JTM†92B1V2* 9243.00 32JTM†92W1V2* 13690.00 32JTM†92F1V2* 15059.00 32JTM†92N1V2* 11984.00Note: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating. Dual voltage coils not available in modified starters. For conduit hubs and conversion instructions, seepage 16-87. If motor FLA are unknown, select overload on thebasis that low speed FLA will be no greater than 50%of high speed FLA.16-36Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Combination Two Speed Heavy Duty StartersNon-Fusible, Constant Horsepower with Solid State Overload, Class 32SelectionOrdering Information Replace the (*) with a letter fromthe coil table. Dual voltage coils arewired on high voltage unlessspecified on order. Replace the (†) with the letter thatcorresponds to the correct FLA in theHigh/Low Speed FLA Table. Fuse clips see page 16-95. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-124. Wiring Diagrams see page 16-134. Replacement Parts see page 16-155.Coil Table60Hz Voltage Letter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages andfrequencies see FactoryModifications page 16-94.High/Low Speed FLA Table Size FLA †0,1 0.25–1 A0,1 0.75–3 B0,1 2.5–10 D0–1 3 ⁄4 9–18 E1–4 13–27 F1 3 ⁄4 20–40 G2–4 22–45 H2 1 ⁄2–4 30–60 J3–4 45–90 K3 1 ⁄2–4 57–115 L4 67–135 MOne Winding Consequent Pole, 3-Phase (Constant Horsepower)Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedCorrosion Resistant Corrosion Resistant Industrial UseOverload Disc304 Stainless Steel Weatherproof200 230 460 575 NEMA Half Amp Amp Watertight, Dust-tightVolts Volts Volts Volts Size Size Range Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $2 2 3 3 0 — — 30 32CS††92B2H2* 2214.00 32CS††92W2H2* 3541.00 32CS††92F2H2* 3894.00 32CS††92N2H2* 2498.005 5 7 1 ⁄2 7 1 ⁄2 1 — — 30 32DS††92B2H2* 2317.00 32DS††92W2H2* 3645.00 32DS††92F2H2* 4679.00 32DS††92N2H2* 2602.007 1 ⁄2 7 1 ⁄2 10 10 — 1 3 ⁄4 — 60 32ES††92B2H2* 2928.00 32ES††92W2H2* 4256.00 32ES††92F2H2* 4679.00 32ES††92N2H2* 3214.007 1 ⁄2 10 20 20 2 — — 60 32FS††92B2H2* 3713.00 32FS††92W2H2* 5368.00 32FS††92F2H2* 5904.00 32FS††92N2H2* 4161.0010 15 25 25 — 2 1 ⁄2 — 100 32GS††92B2H2* 4652.00 32GS††92W2H2* 6306.00 32GS††92F2H2* 6936.00 32GS††92N2H2* 5100.0020 25 40 40 3 — — 100 32HS††92B2H2* 5315.00 32HS††92W2H2* 8141.00 32HS††92F2H2* 8955.00 32HS††92N2H2* 6298.0025 30 50 50 — 3 1 ⁄2 — 200 32IS††92B2H2* 11345.00 32IS††92W2H2* 15791.00 32IS††92F2H2* 17371.00 32IS††92N2H2* 14086.0030 40 75 75 4 — — 200 32JT††92B2H2* 12381.00 32JT††92W2H2* 16825.00 32JT††92F2H2* 18508.00 32JT††92N2H2* 15120.00Two Separate Windings, 3-Phase (Constant Horsepower)Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedCorrosion Resistant Corrosion Resistant Industrial UseOverload Disc304 Stainless Steel Weatherproof200 230 460 575 NEMA Half Amp Amp Watertight, Dust-tightVolts Volts Volts Volts Size Size Range Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $2 2 3 3 0 — — 30 32CS††92B1H2* 1835.00 32CS††92W1H2* 3162.00 32CS††92F1H2* 3478.00 32CS††92N1H2* 2119.005 5 7 1 ⁄2 7 1 ⁄2 1 — — 30 32DS††92B1H2* 1956.00 32DS††92W1H2* 3282.00 32DS††92F1H2* 3611.00 32DS††92N1H2* 2240.007 1 ⁄2 7 1 ⁄2 10 10 — 1 3 ⁄4 — 60 32ES††92B1H2* 2438.00 32ES††92W1H2* 3765.00 32ES††92F1H2* 4142.00 32ES††92N1H2* 2722.007 1 ⁄2 10 20 20 2 — — 60 32FS††92B1H2* 3024.00 32FS††92W1H2* 4678.00 32FS††92F1H2* 5146.00 32FS††92N1H2* 3472.0010 15 25 25 — 2 1 ⁄2 — 100 32GS††92B1H2* 3842.00 32GS††92W1H2* 5496.00 32GS††92F1H2* 6046.00 32GS††92N1H2* 4290.0020 25 40 40 3 — — 100 32HS††92B1H2* 4388.00 32HS††92W1H2* 7210.00 32HS††92F1H2* 7932.00 32HS††92N1H2* 5368.0025 30 50 50 — 3 1 ⁄2 — 200 32IS††92B1H2* 8554.00 32IS††92W1H2* 13000.00 32IS††92F1H2* 14300.00 32IS††92N1H2* 11294.0030 40 75 75 4 — — 200 32JT††92B1H2* 9243.00 32JT††92W1H2* 13690.00 32JT††92F1H2* 15059.00 32JT††92N1H2* 11984.0016 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating. Dual voltage coils not available in modified starters. For conduit hubs and conversion instructions, seepage 16-87. First † for high speed, second † for low speed. Usemotor nameplate information to select FLA. If motorFLA are unknown, select overload on the basis thatlow speed FLA will be no greater than 50% of highspeed FLA.Discount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-37

Combination Two Speed Heavy Duty StartersNon-Fusible, Constant or Variable Torque with Ambient Compensated Bimetal Overload, Class 32SelectionOrdering Information Replace the (*) with a letter from the coiltable. Dual voltage coils are wired on highvoltage unless specified on order. Heater elements see page 16-148. (6 required) Fuse clips see page 16-95. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-124. Wiring Diagrams see page 16-134. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies, see FactoryModifications page 16-94.16CONTROLPRODUCTSNEMA & GeneralPurpose ControlOne Winding Consequent Pole, 3-Phase (Constant or Variable Torque)Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedCont- Corrosion Resistant Corrosion Resistant Industrial UseactorDisc304 Stainless Steel Weatherproof200 230 460 575 Amp NEMA Half Amp Watertight, Dust-tightVolts Volts Volts Volts Rating Size Size Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $3 3 5 5 18 0 — 30 32CP92B2V2*81 2137.00 32CP92W2V2*81 3463.00 32CP92F2V2*81 3809.00 32CP92N2V2*81 2421.007 1 ⁄2 7 1 ⁄2 10 10 27 1 — 30 32DP92B2V2*81 2240.00 32DP92W2V2*81 3566.00 32DP92F2V2*81 3923.00 32DP92N2V2*81 2524.0010 10 15 15 40 — 1 3 ⁄4 60 32EP92B2V2*81 2852.00 32EP92W2V2*81 4178.00 32EP92F2V2*81 4596.00 32EP92N2V2*81 3135.0010 15 25 25 45 2 — 60 32FP92B2V2*81 3635.00 32FP92W2V2*81 5289.00 32FP92F2V2*81 5818.00 32FP92N2V2*81 4083.0015 20 30 30 60 — 2 1 ⁄2 100 32GP92B2V2*81 4575.00 32GP92W2V2*81 6229.00 32GP92F2V2*81 6851.00 32GP92N2V2*81 5022.0020 25 50 50 90 3 — 100 32HP92B2V2*81 5237.00 32HP92W2V2*81 8064.00 32HP92F2V2*81 8871.00 32HP92N2V2*81 6220.0030 40 75 75 115 — 3 1 ⁄2 200 32IP92B2V2*81 11269.00 32IP92W2V2*81 15713.00 32IP92F2V2*81 17286.00 32IP92N2V2*81 14008.0040 50 100 100 135 4 — 200 32JP92B2V2*81 12302.00 32JP92W2V2*81 16749.00 32JP92F2V2*81 18423.00 32JP92N2V2*81 15041.00Two Separate Windings, 3-Phase (Constant or Variable Torque)Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R Cont-General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedCorrosion Resistant Corrosion Resistant Industrial Useactor Disc304 Stainless Steel Weatherproof200 230 460 575 Amp NEMA Half Amp Watertight, Dust-tightVolts Volts Volts Volts Rating Size Size Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $3 3 5 5 18 0 — 30 32CP92B1V2*81 1758.00 32CP92W1V2*81 3084.00 32CP92F1V2*81 3393.00 32CP92N1V2*81 2042.007 1 ⁄2 7 1 ⁄2 10 10 27 1 — 30 32DP92B1V2*81 1877.00 32DP92W1V2*81 3205.00 32DP92F1V2*81 3526.00 32DP92N1V2*81 2163.0010 10 15 15 40 — 1 3 ⁄4 60 32EP92B1V2*81 2360.00 32EP92W1V2*81 3687.00 32EP92F1V2*81 4056.00 32EP92N1V2*81 2645.0010 15 25 25 45 2 — 60 32FP92B1V2*81 2946.00 32FP92W1V2*81 4600.00 32FP92F1V2*81 5061.00 32FP92N1V2*81 3394.0015 20 30 30 60 — 2 1 ⁄2 100 32GP92B1V2*81 3765.00 32GP92W1V2*81 5419.00 32GP92F1V2*81 5962.00 32GP92N1V2*81 4213.0020 25 50 50 90 3 — 100 32HP92B1V2*81 4307.00 32HP92W1V2*81 7134.00 32HP92F1V2*81 7847.00 32HP92N1V2*81 5289.0030 40 75 75 115 — 3 1 ⁄2 200 32IP92B1V2*81 8478.00 32IP92W1V2*81 12922.00 32IP92F1V2*81 14215.00 32IP92N1V2*81 11217.0040 50 100 100 135 4 — 200 32JP92B1V2*81 9166.00 32JP92W1V2*81 13611.00 32JP92F1V2*81 14973.00 32JP92N1V2*81 11906.00Note: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating. Dual voltage coils not available in modified starters. For conduit hubs and conversion instructions, seepage 16-87.16-38Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Combination Two Speed Heavy Duty StartersNon-Fusible, Constant Horsepower with Ambient Compensated Bimetal Overload, Class 32SelectionOrdering Information Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Heater elements see page 16-148. (6 Required) Fuse clips see page 16-95. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-124. Wiring Diagrams see page 16-134. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.One Winding Consequent Pole, 3-Phase (Constant Horsepower)Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedCorrosion Resistant Corrosion Resistant Industrial UseContactorDisc304 Stainless Steel Weatherproof200 230 460 575 Amp NEMA Half Amp Watertight, Dust-tightVolts Volts Volts Volts Rating Size Size Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $2 2 3 3 18 0 — 30 32CP92B2H2*81 2137.00 32CP92W2H2*81 3463.00 32CP92F2H2*81 3809.00 32CP92N2H2*81 2421.005 5 7 1 ⁄2 7 1 ⁄2 27 1 — 30 32DP92B2H2*81 2240.00 32DP92W2H2*81 3566.00 32DP92F2H2*81 3923.00 32DP92N2H2*81 2524.007 1 ⁄2 7 1 ⁄2 10 10 40 — 1 3 ⁄4 60 32EP92B2H2*81 2852.00 32EP92W2H2*81 4178.00 32EP92F2H2*81 4596.00 32EP92N2H2*81 3135.007 1 ⁄2 10 20 20 45 2 — 60 32FP92B2H2*81 3635.00 32FP92W2H2*81 5289.00 32FP92F2H2*81 5818.00 32FP92N2H2*81 4083.0010 15 25 25 60 — 2 1 ⁄2 100 32GP92B2H2*81 4575.00 32GP92W2H2*81 6229.00 32GP92F2H2*81 6851.00 32GP92N2H2*81 5022.0020 25 40 40 90 3 — 100 32HP92B2H2*81 5237.00 32HP92W2H2*81 8064.00 32HP92F2H2*81 8860.00 32HP92N2H2*81 6220.0025 30 50 50 115 — 3 1 ⁄2 200 32IP92B2H2*81 11269.00 32IP92W2H2*81 15713.00 32IP92F2H2*81 17286.00 32IP92N2H2*81 14008.0030 40 75 75 135 4 — 200 32JP92B2H2*81 12302.00 32JP92W2H2*81 16749.00 32JP92F2H2*81 18423.00 32JP92N2H2*81 15041.00Two Separate Windings, 3-Phase (Constant Horsepower)Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedCorrosion Resistant Corrosion Resistant Industrial UseContactorDisc304 Stainless Steel Weatherproof200 230 460 575 Amp NEMA Half Amp Watertight, Dust-tightVolts Volts Volts Volts Rating Size Size Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $2 2 3 3 18 0 — 30 32CP92B1H2*81 1758.00 32CP92W1H2*81 3084.00 32CP92F1H2*81 3393.00 32CP92N1H2*81 2042.005 5 7 1 ⁄2 7 1 ⁄2 27 1 — 30 32DP92B1H2*81 1877.00 32DP92W1H2*81 3205.00 32DP92F1H2*81 3526.00 32DP92N1H2*81 2163.007 1 ⁄2 7 1 ⁄2 10 10 40 — 1 3 ⁄4 60 32EP92B1H2*81 2360.00 32EP92W1H2*81 3687.00 32EP92F1H2*81 4056.00 32EP92N1H2*81 2645.007 1 ⁄2 10 20 20 45 2 — 60 32FP92B1H2*81 2946.00 32FP92W1H2*81 4600.00 32FP92F1H2*81 5061.00 32FP92N1H2*81 3394.0010 15 25 25 60 — 2 1 ⁄2 100 32GP92B1H2*81 3765.00 32GP92W1H2*81 5419.00 32GP92F1H2*81 5962.00 32GP92N1H2*81 4213.0020 25 40 40 90 3 — 100 32HP92B1H2*81 4307.00 32HP92W1H2*81 7134.00 32HP92F1H2*81 7847.00 32HP92N1H2*81 5289.0025 30 50 50 115 — 3 1 ⁄2 200 32IP92B1H2*81 8478.00 32IP92W1H2*81 12923.00 32IP92F1H2*81 14215.00 32IP92N1H2*81 11217.0030 40 75 75 135 4 — 200 32JP92B1H2*81 9166.00 32JP92W1H2*81 13611.00 32JP92F1H2*81 14973.00 32JP92N1H2*81 11906.0016 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating. Dual voltage coils not available in modified starters. For conduit hubs and conversion instructions, seepage 16-87.Discount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-39

Combination Two Speed Heavy Duty StartersMCP Type, Constant or Variable Torque with Solid State Overload, Class 32SelectionOrdering Information Replace the (*) with a letter fromthe coil table. Dual voltage coilsare wired on high voltage unlessspecified on order. Replace the (†) with the letter thatcorresponds to the correct low speedFLA in the FLA table. Field Modification Kits see page16-79. Factory Modifications see page16-94. Dimensions see page 16-124. Wiring Diagrams see page 16-134. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies, seeFactory Modifications page 16-94.Low Speed FLA TableSize FLA †0,1 0.25–1 A0,1 0.75–3 B0,1 2.5–10 D0–1 3 /4 9–18 E1–4 13–27 F1 3 /4 20–40 G2–4 22–45 H2 1 /2–4 30–60 J3–4 45–90 K3 1 /2–4 57–115 L4 67–135 M16CONTROLPRODUCTSNEMA & GeneralPurpose Control1⁄2 1⁄2 1 1 0 — 0.75–3 3 32CSB†92B2V* 2619.00 32CSB†92W2V* 3945.00 32CSB†92F2V* 4340.00 32CSB†92N2V* 2903.002 2 5 5 0 — 2.5–10 10 32CSD†92B2V* 2619.00 32CSD†92W2V* 3945.00 32CSD†92F2V* 4340.00 32CSD†92N2V* 2903.003 3 — — 0 — 9–18 25 32CSE†92B2V* 2619.00 32CSE†92W2V* 3945.00 32CSE†92F2V* 4340.00 32CSE†92N2V* 2903.001 1 ⁄2 1 1 ⁄2 1 1 1 — 0.75–3 3 32DSB†92B2V* 2722.00 32DSB†92W2V* 4049.00 32DSB†92F2V* 4455.00 32DSB†92N2V* 3007.002 2 5 5 1 — 2.5–10 10 32DSD†92B2V* 2722.00 32DSD†92W2V* 4049.00 32DSD†92F2V* 4455.00 32DSD†92N2V* 3007.003 3 7 1 ⁄2 10 1 — 9–18 25 32DSE†92B2V* 2722.00 32DSE†92W2V* 4049.00 32DSE†92F2V* 4455.00 32DSE†92N2V* 3007.007 1 ⁄2 7 1 ⁄2 10 — 1 — 13–27 30 32DSF†92B2V* 2722.00 32DSF†92W2V* 4049.00 32DSF†92F2V* 4455.00 32DSF†92N2V* 3007.00— — 15 15 — 1 3 ⁄4 13–27 40 32ESF†92B2V* 3377.00 32ESF†92W2V* 4703.00 32ESF†92F2V* 5174.00 32ESF†92N2V* 3661.0010 10 — — — 1 3 ⁄4 20–40 50 32ESG†92B2V* 3377.00 32ESG†92W2V* 4703.00 32ESG†92F2V* 5174.00 32ESG†92N2V* 3661.00— — 15 20 2 — 13–27 40 32FSF†92B2V* 4161.00 32FSF†92W2V* 5815.00 32FSF†92F2V* 6397.00 32FSF†92N2V* 4610.0010 15 25 25 2 — 22–45 50 32FSH†92B2V* 4161.00 32FSH†92W2V* 5815.00 32FSH†92F2V* 6397.00 32FSH†92N2V* 4610.00— — 30 30 — 2 1 ⁄2 22–45 50 32GSH†92B2V* 4954.00 32GSH†92W2V* 6608.00 32GSH†92F2V* 7268.00 32GSH†92N2V* 5401.0015 20 — — — 2 1 ⁄2 30–60 100 32GSJ†92B2V* 4954.00 32GSJ†92W2V* 6608.00 32GSJ†92F2V* 7268.00 32GSJ†92N2V* 5401.00— — 30 30 3 — 30–60 100 32HSJ†92B2V* 5616.00 32HSJ†92W2V* 8443.00 32HSJ†92F2V* 9287.00 32HSJ†92N2V* 6599.0025 30 50 50 3 — 45–90 100 32HSK†92B2V* 5616.00 32HSK†92W2V* 8443.00 32HSK†92F2V* 9287.00 32HSK†92N2V* 6599.0030 40 75 75 — 3 1 ⁄2 57–115 125 32ISL†92B2V* 12483.00 32ISL†92W2V* 16928.00 32ISL†92F2V* 18621.00 32ISL†92N2V* 15223.0040 50 100 100 4 67–135 150 32JTM†92B2V* 13518.00 32JTM†92W2V* 17962.00 32JTM†92F2V* 19760.00 32JTM†92N2V* 16256.00Two Separate Windings, 3-Phase (Constant or Variable Torque)One Winding Consequent Pole, 3-Phase (Constant or Variable Torque)Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedOverloadCorrosion Resistant Corrosion Resistant Industrial Use304 Stainless Steel Weatherproof200 230 460 575 NEMA Half Amp Motor CircuitWatertight, Dust-tightVolts Volts Volts Volts Size Size Range Interrupter ETI Amps Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedOverloadCorrosion Resistant Corrosion Resistant Industrial Use304 Stainless Steel Weatherproof200 230 460 575 NEMA Half Amp Motor CircuitWatertight, Dust-tightVolts Volts Volts Volts Size Size Range Interrupter ETI Amps Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $1⁄2 1⁄2 1 1 0 — 0.75–3 3 32CSB†92B1V* 2240.00 32CSB†92W1V* 3566.00 32CSB†92F1V* 3923.00 32CSB†92N1V* 2524.002 2 5 5 0 — 2.5–10 10 32CSD†92B1V* 2240.00 32CSD†92W1V* 3566.00 32CSD†92F1V* 3923.00 32CSD†92N1V* 2524.003 3 — — 0 — 9–18 25 32CSE†92B1V* 2240.00 32CSE†92W1V* 3566.00 32CSE†92F1V* 3923.00 32CSE†92N1V* 2524.001 1 ⁄2 1 1 ⁄2 1 1 1 — 0.75–3 3 32DSB†92B1V* 2360.00 32DSB†92W1V* 3687.00 32DSB†92F1V* 4056.00 32DSB†92N1V* 2645.002 2 5 5 1 — 2.5–10 10 32DSD†92B1V* 2360.00 32DSD†92W1V* 3687.00 32DSD†92F1V* 4056.00 32DSD†92N1V* 2645.003 3 7 1 ⁄2 10 1 — 9–18 25 32DSE†92B1V* 2360.00 32DSE†92W1V* 3687.00 32DSE†92F1V* 4056.00 32DSE†92N1V* 2645.007 1 ⁄2 7 1 ⁄2 10 — 1 — 13–27 30 32DSF†92B1V* 2360.00 32DSF†92W1V* 3687.00 32DSF†92F1V* 4056.00 32DSF†92N1V* 2645.00— — 15 15 — 1 3 ⁄4 13–27 40 32ESF†92B1V* 2886.00 32ESF†92W1V* 4213.00 32ESF†92F1V* 4634.00 32ESF†92N1V* 3170.0010 10 — — — 1 3 ⁄4 20–40 50 32ESG†92B1V* 2886.00 32ESG†92W1V* 4213.00 32ESG†92F1V* 4634.00 32ESG†92N1V* 3170.00— — 15 20 2 — 13–27 40 32FSF†92B1V* 3472.00 32FSF†92W1V* 5126.00 32FSF†92F1V* 5640.00 32FSF†92N1V* 3920.0010 15 25 25 2 — 22–45 50 32FSH†92B1V* 3472.00 32FSH†92W1V* 5126.00 32FSH†92F1V* 5640.00 32FSH†92N1V* 3920.00— — 30 30 — 2 1 ⁄2 22–45 50 32GSH†92B1V* 4144.00 32GSH†92W1V* 5798.00 32GSH†92F1V* 6379.00 32GSH†92N1V* 4592.0015 20 — — — 2 1 ⁄2 30–60 100 32GSJ†92B1V* 4144.00 32GSJ†92W1V* 5798.00 32GSJ†92F1V* 6379.00 32GSJ†92N1V* 4592.00— — 30 30 3 — 30–60 100 32HSJ†92B1V* 4686.00 32HSJ†92W1V* 7513.00 32HSJ†92F1V* 8264.00 32HSJ†92N1V* 5668.0025 30 50 50 3 — 45–90 100 32HSK†92B1V* 4686.00 32HSK†92W1V* 7513.00 32HSK†92F1V* 8264.00 32HSK†92N1V* 5668.0030 40 75 75 — 3 1 ⁄2 57–115 125 32ISL†92B1V* 9692.00 32ISL†92W1V* 14137.00 32ISL†92F1V* 15552.00 32ISL†92N1V* 12432.0040 50 100 100 4 — 67–135 150 32JTM†92B1V* 10380.00 32JTM†92W1V* 14827.00 32JTM†92F1V* 16310.00 32JTM†92N1V* 13121.00Note: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating. Dual voltage coils not available in modified starters. For conduit hubs and conversion instructions, seepage 16-87. If motor FLA are unknown, select overload on thebasis that low speed FLA will be no greater than 50%of high speed FLA.16-40Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Combination Two Speed Heavy Duty StartersMCP Type, Constant Horsepower with Solid State Overload, Class 32SelectionOrdering Information Replace the (*) with a letter fromthe coil table. Dual voltage coils arewired on high voltage unless specifiedon order. Replace the (†) with the letter thatcorresponds to the correct FLA in theHigh/Low Speed FLA table. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-124. Wiring Diagrams see page 16-134. Replacement Parts see page 16-155.Coil Table60Hz Voltage Letter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages andfrequencies see FactoryModifications page 16-94.High/Low Speed FLA Table Size FLA †0,1 0.25–1 A0,1 0.75–3 B0,1 2.5–10 D0–1 3 ⁄4 9–18 E1–4 13–27 F1 3 ⁄4 20–40 G2–4 22–45 H2 1 ⁄2–4 30–60 J3–4 45–90 K3 1 ⁄2–4 57–115 L4 67–135 MOne Winding Consequent Pole, 3-Phase (Constant Horsepower)2 2 3 3 0 — — 10 32CS††92B2H* 2619.00 32CS††92W2H* 3945.00 32CS††92F2H* 4340.00 32CS††92N2H* 2903.005 5 7 1 ⁄2 7 1 ⁄2 1 — — 25 32DS††92B2H* 2722.00 32DS††92W2H* 4049.00 32DS††92F2H* 4455.00 32DS††92N2H* 3007.007 1 ⁄2 7 1 ⁄2 10 10 — 1 3 ⁄4 — 40 32ES††92B2H* 3377.00 32ES††92W2H* 4703.00 32ES††92F2H* 5174.00 32ES††92N2H* 3661.007 1 ⁄2 10 20 20 2 — — 50 32FS††92B2H* 4161.00 32FS††92W2H* 5815.00 32FS††92F2H* 6397.00 32FS††92N2H* 4610.0010 15 25 25 — 2 1 ⁄2 — 100 32GS††92B2H* 4954.00 32GS††92W2H* 6608.00 32GS††92F2H* 7268.00 32GS††92N2H* 5401.0020 25 40 40 3 — — 100 32HS††92B2H* 5616.00 32HS††92W2H* 8443.00 32HS††92F2H* 9287.00 32HS††92N2H* 6599.0025 30 50 50 — 3 1 ⁄2 — 125 32IS††92B2H* 12483.00 32IS††92W2H* 16928.00 32IS††92F2H* 18621.00 32IS††92N2H* 15223.0030 40 75 75 4 — — 150 32JT††92B2H* 13518.00 32JT††92W2H* 17962.00 32JT††92F2H* 19760.00 32JT††92N2H* 16256.00Two Separate Windings, 3-Phase (Constant Horsepower)Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedOverloadCorrosion Resistant Corrosion Resistant Industrial Use304 Stainless Steel Weatherproof200 230 460 575 NEMA Half Amp Motor CircuitWatertight, Dust-tightVolts Volts Volts Volts Size Size Range Interrupter ETI Amps Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedOverloadCorrosion Resistant Corrosion Resistant Industrial Use304 Stainless Steel Weatherproof200 230 460 575 NEMA Half Amp Motor CircuitWatertight, Dust-tightVolts Volts Volts Volts Size Size Range Interrupter ETI Amps Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $2 2 3 3 0 — — 10 32CS††92B1H* 2240.00 32CS††92W1H* 3566.00 32CS††92F1H* 3923.00 32CS††92N1H* 2524.005 5 7 1 ⁄2 7 1 ⁄2 1 — — 25 32DS††92B1H* 2360.00 32DS††92W1H* 3687.00 32DS††92F1H* 4056.00 32DS††92N1H* 2645.007 1 ⁄2 7 1 ⁄2 10 10 — 1 3 ⁄4 — 40 32ES††92B1H* 2886.00 32ES††92W1H* 4213.00 32ES††92F1H* 4634.00 32ES††92N1H* 3170.007 1 ⁄2 10 20 20 2 — — 50 32FS††92B1H* 3472.00 32FS††92W1H* 5126.00 32FS††92F1H* 5640.00 32FS††92N1H* 3920.0010 15 25 25 — 2 1 ⁄2 — 100 32GS††92B1H* 4144.00 32GS††92W1H* 5798.00 32GS††92F1H* 6379.00 32GS††92N1H* 4592.0020 25 40 40 3 — — 100 32HS††92B1H* 4686.00 32HS††92W1H* 7513.00 32HS††92F1H* 8264.00 32HS††92N1H* 5668.0025 30 50 50 — 3 1 ⁄2 — 125 32IS††92B1H* 9692.00 32IS††92W1H* 14137.00 32IS††92F1H* 15552.00 32IS††92N1H* 12432.0030 40 75 75 4 — — 150 32JT††92B1H* 10380.00 32JT††92W1H* 14827.00 32JT††92F1H* 16310.00 32JT††92N1H* 13121.0016 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating. Dual voltage coils not available in modified starters. For conduit hubs and conversion instructions, seepage 16-87. First † for high speed, second † for low speed. Usemotor nameplate information to select FLA. If motorFLA are unknown, select overload on the basis thatlow speed FLA will be no greater than 50% of highspeed FLA.Discount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-41

Combination Two Speed Heavy Duty StartersMCP Type, Constant or Variable Torque w/Ambient Compensated Bimetal Overload, Class 32 SelectionOrdering Information Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Heater elements see page 16-148. (6 Required) Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-124. Wiring Diagrams see page 16-134. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.16CONTROLPRODUCTSNEMA & GeneralPurpose ControlOne Winding Consequent Pole, 3-Phase (Constant or Variable Torque)Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedCorrosion Resistant Corrosion Resistant Industrial Use304 Stainless Steel Weatherproof200 230 460 575 NEMA Half Motor CircuitWatertight, Dust-tightVolts Volts Volts Volts Size Size Interrupter ETI Amps Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $1⁄2 1⁄2 1 1 0 — 3 32CP92B2VA*81 2542.00 32CP92W2VA*81 3868.00 32CP92F2VA*81 4255.00 32CP92N2VA*81 2826.001 1 3 3 0 — 10 32CP92B2VB*81 2542.00 32CP92W2VB*81 3868.00 32CP92F2VB*81 4255.00 32CP92N2VB*81 2826.003 3 5 5 0 — 25 32CP92B2VC*81 2542.00 32CP92W2VC*81 3868.00 32CP92F2VC*81 4255.00 32CP92N2VC*81 2826.001 1 ⁄2 1 1 ⁄2 1 1 1 — 3 32DP92B2VA*81 2645.00 32DP92W2VA*81 3972.00 32DP92F2VA*81 4370.00 32DP92N2VA*81 2928.001 1 3 3 1 — 10 32DP92B2VB*81 2645.00 32DP92W2VB*81 3972.00 32DP92F2VB*81 4370.00 32DP92N2VB*81 2928.003 3 7 1 ⁄2 7 1 ⁄2 1 — 25 32DP92B2VD*81 2645.00 32DP92W2VD*81 3972.00 32DP92F2VD*81 4370.00 32DP92N2VD*81 2928.007 1 ⁄2 7 1 ⁄2 10 10 1 — 30 32DP92B2VE*81 2645.00 32DP92W2VE*81 3972.00 32DP92F2VE*81 4370.00 32DP92N2VE*81 2928.00— — 15 15 — 1 3 ⁄4 40 32EP92B2VF*81 3300.00 32EP92W2VF*81 4626.00 32EP92F2VF*81 5089.00 32EP92N2VF*81 3584.0010 10 — — — 1 3 ⁄4 50 32EP92B2VG*81 3300.00 32EP92W2VG*81 4626.00 32EP92F2VG*81 5089.00 32EP92N2VG*81 3584.00— — 20 20 2 — 40 32FP92B2VH*81 4083.00 32FP92W2VH*81 5738.00 32FP92F2VH*81 6313.00 32FP92N2VH*81 4531.0010 15 25 25 2 — 50 32FP92B2VJ*81 4083.00 32FP92W2VJ*81 5738.00 32FP92F2VJ*81 6313.00 32FP92N2VJ*81 4531.0010 15 30 30 — 2 1 ⁄2 50 32GP92B2VK*81 4875.00 32GP92W2VK*81 6531.00 32GP92F2VK*81 7184.00 32GP92N2VK*81 5324.0015 20 — — — 2 1 ⁄2 100 32GP92B2VL*81 4875.00 32GP92W2VL*81 6531.00 32GP92F2VL*81 7184.00 32GP92N2VL*81 5324.00— — 30 30 3 — 50 32HP92B2VM*81 5540.00 32HP92W2VM*81 8365.00 32HP92F2VM*81 9203.00 32HP92N2VM*81 6522.0025 30 50 50 3 — 100 32HP92B2VN*81 5540.00 32HP92W2VN*81 8365.00 32HP92F2VN*81 9203.00 32HP92N2VN*81 6522.0030 40 75 75 — 3 1 ⁄2 125 32IP92B2VP*81 12406.00 32IP92W2VP*81 16850.00 32IP92F2VP*81 18536.00 32IP92N2VP*81 15145.0040 50 100 100 4 — 150 32JP92B2VR*81 13439.00 32JP92W2VR*81 17886.00 32JP92F2VR*81 19675.00 32JP92N2VR*81 16178.00Two Separate Windings, 3-Phase (Constant or Variable Torque)Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedCorrosion Resistant Corrosion Resistant Industrial Use304 Stainless Steel Weatherproof200 230 460 575 NEMA Half Motor CircuitWatertight, Dust-tightVolts Volts Volts Volts Size Size Interrupter ETI Amps Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ CatalogNumber List Price $1⁄2 1⁄2 1 1 0 — 3 32CP92B1VA*81 2163.00 32CP92W1VA*81 3489.00 32CP92F1VA*81 3838.00 32CP92N1VA*81 2446.001 1 3 3 0 — 10 32CP92B1VB*81 2163.00 32CP92W1VB*81 3489.00 32CP92F1VB*81 3838.00 32CP92N1VB*81 2446.003 3 5 5 0 — 25 32CP92B1VC*81 2163.00 32CP92W1VC*81 3489.00 32CP92F1VC*81 3838.00 32CP92N1VC*81 2446.001⁄2 1⁄2 1 1 1 — 3 32DP92B1VA*81 2284.00 32DP92W1VA*81 3610.00 32DP92F1VA*81 3971.00 32DP92N1VA*81 2567.001 1 3 3 1 — 10 32DP92B1VB*81 2284.00 32DP92W1VB*81 3610.00 32DP92F1VB*81 3971.00 32DP92N1VB*81 2567.003 3 7 1 ⁄2 7 1 ⁄2 1 — 25 32DP92B1VD*81 2284.00 32DP92W1VD*81 3610.00 32DP92F1VD*81 3971.00 32DP92N1VD*81 2567.007 1 ⁄2 7 1 ⁄2 10 10 1 — 30 32DP92B1VE*81 2284.00 32DP92W1VE*81 3610.00 32DP92F1VE*81 3971.00 32DP92N1VE*81 2567.00— — 15 15 — 1 3 ⁄4 40 32EP92B1VF*81 2809.00 32EP92W1VF*81 4135.00 32EP92F1VF*81 4549.00 32EP92N1VF*81 3093.0010 10 — — — 1 3 ⁄4 50 32EP92B1VG*81 2809.00 32EP92W1VG*81 4135.00 32EP92F1VG*81 4549.00 32EP92N1VG*81 3093.00— — 20 20 2 — 40 32FP92B1VH*81 3394.00 32FP92W1VH*81 5048.00 32FP92F1VH*81 5554.00 32FP92N1VH*81 3842.0010 15 25 25 2 — 50 32FP92B1VJ*81 3394.00 32FP92W1VJ*81 5048.00 32FP92F1VJ*81 5554.00 32FP92N1VJ*81 3842.0010 15 30 30 — 2 1 ⁄2 50 32GP92B1VK*81 4066.00 32GP92W1VK*81 5719.00 32GP92F1VK*81 6293.00 32GP92N1VK*81 4514.0015 20 — — — 2 1 ⁄2 100 32GP92B1VL*81 4066.00 32GP92W1VL*81 5719.00 32GP92F1VL*81 6293.00 32GP92N1VL*81 4514.00— — 30 30 3 — 50 32HP92B1VM*81 4610.00 32HP92W1VM*81 7435.00 32HP92F1VM*81 8178.00 32HP92N1VM*81 5591.0025 30 50 50 3 — 100 32HP92B1VN*81 4610.00 32HP92W1VN*81 7435.00 32HP92F1VN*81 8178.00 32HP92N1VN*81 5591.0030 40 75 75 — 3 1 ⁄2 125 32IP92B1VP*81 9615.00 32IP92W1VP*81 14060.00 32IP92F1VP*81 15466.00 32IP92N1VP*81 12354.0040 50 100 100 4 — 150 32JP92B1VR*81 10304.00 32JP92W1VR*81 14748.00 32JP92F1VR*81 16224.00 32JP92N1VR*81 13043.00Note: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating. Dual voltage coils not available in modified starters. For conduit hubs and conversion instructions, seepage 16-87.16-42Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Combination Two Speed Heavy Duty StartersMCP, Constant Horsepower w/ Ambient Compensated Bimetal Overload, Class 32SelectionOrdering Information Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Heater elements see page 16-148. (6 Required) Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-124. Wiring Diagrams see page 16-134. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.One Winding Consequent Pole, 3-Phase (Constant Horsepower)Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedCorrosion Resistant Corrosion Resistant Industrial Use304 Stainless Steel Weatherproof200 230 460 575 NEMA Half Motor CircuitWatertight, Dust-tightVolts Volts Volts Volts Size Size Interrupter ETI Amps Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $1⁄2 1⁄2 1 1 0 — 3 32CP92B2HA*81 2542.00 32CP92W2HA*81 3868.00 32CP92F2HA*81 4255.00 32CP92N2HA*81 2826.001 1 ⁄2 1 1 ⁄2 3 3 0 — 10 32CP92B2HB*81 2542.00 32CP92W2HB*81 3868.00 32CP92F2HB*81 4255.00 32CP92N2HB*81 2826.002 2 — — 0 — 25 32CP92B2HC*81 2542.00 32CP92W2HC*81 3868.00 32CP92F2HC*81 4255.00 32CP92N2HC*81 2826.001⁄2 1⁄2 1 1 1 — 3 32DP92B2HA*81 2645.00 32DP92W2HA*81 3972.00 32DP92F2HA*81 4370.00 32DP92N2HA*81 2928.001 1 ⁄2 1 1 ⁄2 3 3 1 — 10 32DP92B2HB*81 2645.00 32DP92W2HB*81 3972.00 32DP92F2HB*81 4370.00 32DP92N2HB*81 2928.003 3 7 1 ⁄2 7 1 ⁄2 1 — 25 32DP92B2HD*81 2645.00 32DP92W2HD*81 3972.00 32DP92F2HD*81 4370.00 32DP92N2HD*81 2928.005 5 — — 1 — 30 32DP92B2HE*81 2645.00 32DP92W2HE*81 3972.00 32DP92F2HE*81 4370.00 32DP92N2HE*81 2928.00— — 10 10 — 1 3 ⁄4 40 32EP92B2HF*81 3300.00 32EP92W2HF*81 4626.00 32EP92F2HF*81 5089.00 32EP92N2HF*81 3584.007 1 ⁄2 7 1 ⁄2 — — — 1 3 ⁄4 50 32EP92B2HG*81 3300.00 32EP92W2HG*81 4626.00 32EP92F2HG*81 5089.00 32EP92N2HG*81 3584.00— 7 1 ⁄2 15 20 2 — 40 32FP92B2HH*81 4083.00 32FP92W2HH*81 5738.00 32FP92F2HH*81 6313.00 32FP92N2HH*81 4531.007 1 ⁄2 10 20 — 2 — 50 32FP92B2HJ*81 4083.00 32FP92W2HJ*81 5738.00 32FP92F2HJ*81 6313.00 32FP92N2HJ*81 4531.00— — 30 30 — 2 1 ⁄2 50 32GP92B2HK*81 4875.00 32GP92W2HK*81 6531.00 32GP92F2HK*81 7184.00 32GP92N2HK*81 5324.0010 15 30 40 3 — 50 32HP92B2HM*81 5540.00 32HP92W2HM*81 8365.00 32HP92F2HM*81 9203.00 32HP92N2HM*81 6522.0020 25 40 — 3 — 100 32HP92B2HN*81 5540.00 32HP92W2HN*81 8365.00 32HP92F2HN*81 9203.00 32HP92N2HN*81 6522.0025 30 50 50 — 3 1 ⁄2 125 32IP92B2HP*81 12406.00 32IP92W2HP*81 16850.00 32IP92F2HP*81 18536.00 32IP92N2HP*81 15145.0030 40 75 75 4 — 150 32JP92B2HR*81 13439.00 32JP92W2HR*81 17886.00 32JP92F2HR*81 19675.00 32JP92N2HR*81 16178.0016 CONTROLPRODUCTSTwo Separate Windings, 3-Phase (Constant Horsepower)Max HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 12, NEMA 3/3R General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 4 PaintedCorrosion Resistant Corrosion Resistant Industrial Use304 Stainless Steel Weatherproof200 230 460 575 NEMA Half Motor CircuitWatertight, Dust-tightVolts Volts Volts Volts Size Size Interrupter ETI Amps Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $1⁄21⁄2 1 1 0 — 3 32CP92B1HA*81 2163.00 32CP92W1HA*81 3489.00 32CP92F1HA*81 3838.00 32CP92N1HA*81 2446.001 1 ⁄2 1 1 ⁄2 3 3 0 — 10 32CP92B1HB*81 2163.00 32CP92W1HB*81 3489.00 32CP92F1HB*81 3838.00 32CP92N1HB*81 2446.002 2 — — 0 — 25 32CP92B1HC*81 2163.00 32CP92W1HC*81 3489.00 32CP92F1HC*81 3838.00 32CP92N1HC*81 2446.001⁄21⁄2 1 1 1 — 3 32DP92B1HA*81 2284.00 32DP92W1HA*81 3610.00 32DP92F1HA*81 3971.00 32DP92N1HA*81 2567.001 1 ⁄2 1 1 ⁄2 3 3 1 — 10 32DP92B1HB*81 2284.00 32DP92W1HB*81 3610.00 32DP92F1HB*81 3971.00 32DP92N1HB*81 2567.003 3 7 1 ⁄2 7 1 ⁄2 1 — 25 32DP92B1HD*81 2284.00 32DP92W1HD*81 3610.00 32DP92F1HD*81 3971.00 32DP92N1HD*81 2567.005 5 — — 1 — 30 32DP92B1HE*81 2284.00 32DP92W1HE*81 3610.00 32DP92F1HE*81 3971.00 32DP92N1HE*81 2567.00— — 10 10 — 1 3 ⁄4 40 32EP92B1HF*81 2809.00 32EP92W1HF*81 4135.00 32EP92F1HF*81 4549.00 32EP92N1HF*81 3093.007 1 ⁄2 7 1 ⁄2 — — — 1 3 ⁄4 50 32EP92B1HG*81 2809.00 32EP92W1HG*81 4135.00 32EP92F1HG*81 4549.00 32EP92N1HG*81 3093.00— 7 1 ⁄2 15 20 2 — 40 32FP92B1HH*81 3394.00 32FP92W1HH*81 5048.00 32FP92F1HH*81 5554.00 32FP92N1HH*81 3842.007 1 ⁄2 10 20 — 2 — 50 32FP92B1HJ*81 3394.00 32FP92W1HJ*81 5048.00 32FP92F1HJ*81 5554.00 32FP92N1HJ*81 3842.00— — 30 30 — 2 1 ⁄2 50 32GP92B1HK*81 4066.00 32GP92W1HK*81 5719.00 32GP92F1HK*81 6293.00 32GP92N1HK*81 4514.0010 15 30 40 3 — 50 32HP92B1HM*81 4610.00 32HP92W1HM*81 7435.00 32HP92F1HM*81 7955.00 32HP92N1HM*81 5591.0020 25 40 — 3 — 100 32HP92B1HN*81 4610.00 32HP92W1HN*81 7435.00 32HP92F1HN*81 7955.00 32HP92N1HN*81 5591.0025 30 50 50 — 3 1 ⁄2 125 32IP92B1HP*81 9615.00 32IP92W1HP*81 14060.00 32IP92F1HP*81 15466.00 32IP92N1HP*81 12354.0030 40 75 75 4 — 150 32JP92B1HR*81 10304.00 32JP92W1HR*81 14748.00 32JP9F1HR*81 16224.00 32JP92N1HR*81 13043.00NEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating.Discount Schedule NEMA Dual voltage coils not available in modified starters. For conduit hubs and conversion instructions, seepage 16-87.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-43

Heavy Duty Contractors3-Phase, Class 40SelectionOrdering Information Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see pages 16-106 open and 16-115 enclosed. Wiring Diagrams see page 16-140. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.16CONTROLPRODUCTSNEMA & GeneralPurpose ControlOpen Type & Standard Width Enclosure, 3-Phase, 3-PoleMax HpEnclosureOpen Type NEMA 1 NEMA 4/4X NEMA 4X NEMA 7 & 9 NEMA 12 General Purpose Stainless Fiberglass NEMA 3 & 4 NEMA 3/3RWatertight, Dust-tight Watertight, Dust-tight Div1 and Div 2 Industrial UseCorrosion Resistant Corrosion Resistant Class I Groups C & D Weatherproof304 Stainless Steel Class II Groups E,F&GClass IIICont-Bolted EnclosuresIndoor/Outdoor Useactor200 230 460 575 Amp NEMA Half Catalog List Catalog List Catalog List Catalog List Catalog List Catalog ListVolts Volts Volts Volts Rating Size Size Number Price $ Number Price $ Number Price $ Number Price $ Number Price $ Number Price $1 1 ⁄2 1 1 ⁄2 2 2 9 00 — 40BP32A* 198.00 40BP32B* 216.00 Use Size 0 — Use Size 0 — Use Size 0 — Use Size 0 —3 3 5 5 18 0 — 40CP32A* 249.00 40CP32B* 268.00 40CP32W* 578.00 40CP32F* 635.00 40CP32H* 1137.00 40CP320* 371.007 1 ⁄2 7 1 ⁄2 10 10 27 1 — 40DP32A* 293.00 40DP32B* 310.00 40DP32W* 621.00 40DP32F* 684.00 40DP32H* 1189.00 40DP320* 414.0010 10 15 15 40 — 1 3 ⁄4 40EP32A* 422.00 40EP32B* 440.00 40EP32W* 750.00 40EP32F* 824.00 40EP32H* 1319.00 40EP320* 414.0010 15 25 25 45 2 — 40FP32A* 534.00 40FP32B* 621.00 40FP32W* 1240.00 40FP32F* 1364.00 40FP32H* 1912.00 40FP320* 810.0015 20 30 30 60 — 2 1 ⁄2 40GP32A* 698.00 40GP32B* 827.00 40GP32W* 1577.00 40GP32F* 1735.00 40GP32H* 2377.00 40GP320* 1033.0025 30 50 50 90 3 — 40HP32A* 861.00 40HP32B* 1033.00 40HP32W* 1912.00 40HP32F* 2103.00 40HP32H* 2860.00 40HP320* 1258.0030 40 75 75 115 — 3 1 ⁄2 40IP32A* 1723.00 40IP32B* 2084.00 40IP32W* 3584.00 40IP32F* 3943.00 40IP32H* 4282.00 40IP320* 2826.0040 50 100 100 135 4 — 40JG32A* 2067.00 40JG32B* 2430.00 40JG32W* 3928.00 40JG32F* 4322.00 40JG32H* 4626.00 40JG320* 3170.0075 100 200 200 270 5 — 40LP32A* 4506.00 40LP32B* 5168.00 40LP32E* 7064.00 — — 40LP32H* 9597.00 40LP320* 7064.00150 200 400 400 540 6 — 40MP32A* 12044.00 40MP32B* 15223.00 40MP32E* 19530.00 — — — — 40MP320* 17549.00— 300 600 600 810 7 — 40NH32A* 17042.00 40NH32B* 20487.00 40NH32E* 24794.00 — — — — 40NH320* 22812.00— 450 900 900 1215 8 — 40PH32A* 27103.00 40PH32B* 31893.00 40PH32E* 35929.00 — — — — 40PH320* 27103.00Extra Wide Enclosure, 3-Phase, 3-PoleMax HpEnclosureNEMA 1 NEMA 4/4X Stainless NEMA 7 & 9 NEMA 12 General Purpose Watertight, Dust-tight NEMA 3 & 4 NEMA 3/3RCorrosion ResistantDiv 1 and Div 2Industrial Use304 Stainless SteelClass I Groups C & DWeatherproofClass II Groups E, F & GClass IIIContactorBolted Enclosures200 230 460 575 Amp NEMA HalfIndoor/Outdoor UseVolts Volts Volts Volts Range Size Size Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $1 1 ⁄2 1 1 ⁄2 2 2 9 00 — 40BP82B* 467.00 Use Size 0 — Use Size 0 — Use Size 0 —3 3 5 5 18 0 — 40CP82B* 528.00 40CP82W* 982.00 40CP82H* 1929.00 40CP820* 586.007 1 ⁄2 7 1 ⁄2 10 10 27 1 — 40DP82B* 570.00 40DP82W* 1025.00 40DP82H* 1973.00 40DP820* 629.0010 10 15 15 40 — 1 3 /4 40EP82B* 700.00 40EP82W* 1154.00 40EP82H* 2101.00 40EP820* 758.0010 15 25 25 45 2 — 40FP82B* 846.00 40FP82W* 1912.00 40FP82H* 2695.00 40FP820* 1215.0015 20 30 30 60 — 2 1 /2 40GP82B* 1035.00 40GP82W* 2101.00 40GP82H* 3160.00 40GP820* 1404.0025 30 50 50 90 3 — 40HP82B* 1352.00 40HP82W* 3782.00 40HP82H* 3420.00 40HP820* 2317.0030 40 75 75 115 — 3 1 /2 40IP82B* 2284.00 40IP82W* 4712.00 40IP82H* 4840.00 40IP820* 3248.0040 50 100 100 135 4 — 40JG82B* 2628.00 40JG82W* 5057.00 40JG82H* 5185.00 40JG820* 3592.00Note: Hp’s shown above are based on the overloadamp range for the FLA’s (per the National ElectricCode) of typical industrial motors. All starter sizescarry one maximum Hp rating. Dual voltage coils not available in size 5-8 starters. For conduit hubs and conversion instructions, seepage 16-87. Enclosure is NEMA Type 4 (painted steel). Only availableF coil 100-250V AC 50/60Hz, or DCH coil 150-500V AC 50/60Hz, or DC Only availableF coil100-250V AC 50/60Hz, or DCStandard Auxiliary ContactsType Size (3rd Character) Configuration Internal / ExternalB Thru E 1N.O. InternalAll FVNR F Thru J 1N.O. ExternalStarters &Contactors L Thru M 2N.O., 2N.C. ExternalN Thru P 1N.O., 1N.C. External Lugs are not included, refer to page 16-86.16-44Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Heavy Duty ContactorsSingle Phase, 4-Pole & Vacuum, Class 40SelectionOrdering Information Replace the (*) with a letter from the coil table.Dual voltage coils are wired on high voltage unlessspecified on order. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see pages 16-106 open and 16-115enclosed. Wiring Diagrams see page 16-140. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.Open Type & Standard Width Enclosure, Single Phase, 2-Pole Max HpOpen Type & Standard Width Enclosure, 4-PoleMax HpEnclosureOpen Type NEMA 1 NEMA 4/4X NEMA 4X NEMA 7 & 9 NEMA 12General Purposes Stainless Fiberglass NEMA 3 & 4 NEMA 3/3R Watertight, Dust-tight Watertight, Dust-tight Div 1 and Div 2 Industrial UseCorrosion Resistant Corrosion Resistant Class I Groups C & D Weatherproof304 Stainless Steel Class II Groups E, F & GCont-Class III208/ actor Bolted EnclosureIndoor/Outdoor Use115 230 Amp NEMA HalfVolts Volts Rating Size Size Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $1⁄3 1 9 00 — 40BP12A* 172.00 40BP12B* 189.00 Use Size 0 — Use Size 0 — Use Size 0 — Use Size 0 —1 2 18 0 — 40CP12A* 224.00 40CP12B* 242.00 40CP12W* 551.00 40CP12F* 607.00 40CP12H* 1112.00 40CP120* 344.002 3 27 1 — 40DP12A* 268.00 40DP12B* 285.00 40DP12W* 595.00 40DP12F* 655.00 40DP12H* 1163.00 40DP120* 388.003 5 35 1P — 40EP12A* 344.00 40EP12B* 362.00 40EP12W* 1206.00 40EP12F* 1327.00 40EP12H* 1240.00 40EP120* 465.003 7 1 ⁄2 45 2 — 40FP12A* 500.00 40FP12B* 586.00 40EP12W* 1206.00 40EP12F* 1327.00 40FP12H* 1877.00 40FP120* 775.005 10 60 — 2 1 ⁄2 40GP12A* 647.00 40GP12B* 775.00 40GP12W* 1526.00 40GP12F* 1679.00 40GP12H* 2163.00 40GP120* 982.007 1 ⁄3 15 90 3 — 40HP12A* 793.00 40HP12B* 965.00 40HP12W* 1844.00 40HP12F* 2029.00 40HP12H* 2791.00 40HP120* 1189.00— — 115 — 3 1 ⁄2 40IP12A* 1568.00 40IP12B* 1930.00 40IP12W* 3428.00 40IP12F* 3772.00 40IP12H* 4126.00 40IP120* 2670.00— — 135 4 — 40JG12A* 1912.00 40JG12B* 2274.00 40JG12W* 3773.00 40JG12F* 4151.00 40JG12H* 4471.00 40JG120* 3015.00EnclosureOpen Type NEMA 1 NEMA 4/4X NEMA 4X NEMA 7 & 9 NEMA 12General Purpose Stainless Fiberglass NEMA 3 & 4 NEMA 3/3R Watertight, Dust-tight Watertight, Dust-tight Div 1 and Div 2 Industrial UseCorrosion Resistant Corrosion Resistant Class I Groups C & D Weatherproof304 Stainless Steel Class II Groups E, F & GCont-Class IIIactorBolted EnclosureIndoor/Outdoor Use200 230 460 575 Amp NEMA HalfVolts Volts Volts Volts Rating Size Size Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $1⁄3 1 1 ⁄2 2 2 9 00 — 40BP22A* 224.00 40BP22B* 242.00 Use Size 0 — Use Size 0 — Use Size 0 — Use Size 0 —2 3 5 5 18 0 — 40CP22A* 319.00 40BP22B* 242.00 40CP22W* 647.00 40CP22F* 711.00 40CP22H* 1206.00 40CP220* 440.003 7 1 ⁄2 10 10 27 1 — 40DP22A* 362.00 40DP22B* 379.00 40DP22W* 689.00 40DP22F* 758.00 40DP22H* 1258.00 40DP220* 482.005 10 15 15 40 — 1 3 ⁄4 40EP22A* 491.00 40EP22B* 509.00 40EP22W* 819.00 40EP22F* 901.00 40EP22H* 1387.00 40EP220* 612.00Vacuum Contactors, 3-Phase, 3-Pole Max HpContactorOpen TypeAmpNEMA200V 230V 460V 575V Rating Size Catalog Number List Price $40 50 100 100 135 4 40JV32A* 2397.0075 100 200 200 270 5 40LV32A* 4842.00150 200 400 400 540 6 40MV32A* 13539.0016 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating. Dual voltage coils not available for vacuum contactors.Refer to Page 16-94 for a complete list of available coilvoltages.Discount Schedule NEMA For conduit hubs and conversion instructions, see page16-87. To order single phase contactor in an extra wide enclosure,order the enclosure kit from Page 16-90 and theopen style contactor as separate items. Coils D, F, or G will be wired for incoming voltage.J coil will be wired for separate source. Coils E, H,and L do not apply to single phase starters. 1 NO Auxiliary.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-45

Reversing Heavy Duty ContactorsClass 43SelectionOrdering Information Replace the (*) with a letter from the coil table. Dual voltage coils arewired on high voltage unless specified on order. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see pages 16-107 open and 16-120 enclosed. Wiring Diagrams see page 16-140. Replacement Parts see page 16-155.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A200–208 D220–240 G277 L220–240/440–480 C440–480 H575–600 EFor other voltages and frequencies,see Factory Modifications page 16-94.16CONTROLPRODUCTSOpen Type & Standard Width Enclosure, 3-Phase, 3-PoleMax HpEnclosureOpen Type NEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9 NEMA 12 General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3 & 4 NEMA 3/3RCorrosion Resistant Corrosion Resistant Div 1 and Div 2 Industrial Use304 Stainless Steel Class I Groups C & D WeatherproofClass II Groups E, F & GCont-Class IIIBolted EnclosuresactorIndoor/Outdoor Use200 230 460 575 Amp NEMA Half Catalog List Catalog List Catalog List Catalog List Catalog List Catalog ListVolts Volts Volts Volts Rating Size Size Number Price $ Number Price $ Number Price $ Number Price $ Number Price $ Number Price $1⁄2 1⁄2 2 2 9 00 — 43BP32A* 517.00 43BP32B* 551.00 Use Size 0 — Use Size 0 — Use Size 0 — Use Size 0 —3 3 5 5 18 0 — 43CP32A* 621.00 43CP32B* 655.00 43CP32W* 1051.00 43CP32F* 1156.00 43CP32H* 2137.00 43CP320* 810.007 1 ⁄2 7 1 ⁄2 10 10 27 1 — 43DP32A* 707.00 43DP32B* 758.00 43DP32W* 1309.00 43DP32F* 1442.00 43DP32H* 2360.00 43DP320* 914.0010 10 15 15 40 — 1 3 ⁄4 43EP32A* 965.00 43EP32B* 1016.00 43EP32W* 1568.00 43EP32F* 1725.00 43EP32H* 2620.00 43EP320* 1172.0010 15 25 25 45 2 — 43FP32A* 1344.00 43FP32B* 1482.00 43FP32W* 2377.00 43FP32F* 2616.00 43FP32H* 3938.00 43FP320* 1740.0015 20 30 30 60 — 2 1 ⁄2 43GP32A* 1784.00 43GP32B* 1973.00 43GP32W* 3084.00 43GP32F* 3393.00 43GP32H* 5023.00 43GP320* 2387.0025 30 50 50 90 3 — 43HP32A* 2231.00 43HP32B* 2473.00 43HP32W* 3799.00 43HP32F* 4179.00 43HP32H* 6323.00 43HP320* 3042.0030 40 75 75 115 — 3 1 ⁄2 43IP32A* 4875.00 43IP32B* 5324.00 43IP32W* 7668.00 43IP32F* 8435.00 43IP32H* 11491.00 43IP320* 6203.0040 50 100 100 135 4 — 43JG32A* 5566.00 43JG32B* 6013.00 43JG32W* 8357.00 43JG32F* 9193.00 43JG32H* 12182.00 43JG320* 6892.0075 100 200 200 270 5 — 43LP32A* 11113.00 43LP32B* 13707.00 43LP32E* 16739.00 — — — — 43LP320* 15534.00100 200 400 400 540 6 — 43MP32A* 26172.00 43MP32B* 30480.00 43MP32E* 34788.00 — — — — 43MP320* 32124.00— 300 600 600 810 7 — 43NH32A* 37088.00 43NH32B* 41395.00 43NH32E* 45703.00 — — — — 43NH320* 43721.00— 450 900 900 1215 8 — 43PH32A* 72272.00 — — — — — — — — — —NEMA & GeneralPurpose ControlOpen Type & Standard Width Enclosure, Single Phase, 3-Wire, 2-Pole Max HpEnclosureOpen Type NEMA 1 NEMA 4/4X Stainless NEMA 4X Fiberglass NEMA 7 & 9 NEMA 12 General Purpose Watertight, Dust-tight Watertight, Dust-tight NEMA 3 & 4 NEMA 3/3RCorrosion Resistant Corrosion Resistant Div 1 and Div 2 Industrial Use304 Stainless Steel Class I Groups C & D WeatherproofClass II Groups E, F & GCont-Class III208/ actor Bolted Enclosures115 230 Amp NEMA Indoor/Outdoor UseVolts Volts Rating Size Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $1 1 ⁄3 1 9 00 43BP12A* 500.00 43BP12B* 534.00 Use Size 0 — Use Size 0 — Use Size 0 — Use Size 0 —1 2 18 0 43CP12A* 603.00 43CP12B* 637.00 43CP12W* 1033.00 43CP12F* 1137.00 43CP12H* 2231.00 43CP120* 793.002 3 27 1 43DP12A* 689.00 43DP12B* 741.00 43DP12W* 1293.00 43DP12F* 1423.00 43DP12H* 2343.00 43DP120* 896.003 5 35 1P 43EP12A* 947.00 43EP12B* 1000.00 43EP12W* 1551.00 43EP12F* 1706.00 43EP12H* 2602.00 43EP120* 1154.00Note: Hp’s shown above are based on the overloadamp range for the FLA’s (per the National ElectricCode) of typical industrial motors. All starter sizescarry one maximum Hp rating. Dual voltage coils not available in size 5–8 starters. For conduit hubs and conversion instructions, seepage 16-87. Enclosure is NEMA Type 4 (painted steel). Coils D, F, or G will be wired for incoming voltage. Jcoil will be wired for separate source. Coils E, H, andL do not apply to single phase starters. Only availableF coil 100-250V AC 50/60Hz, or DCH coil 150-500V AC 50/60Hz, or DC Only availableF coil 100-250V AC 50/60Hz, or DC Auxiliary contacts43B-43E 4th pole built-in43F-43J 2 NO & 2 NC16-46Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Overload RelaysSolid State ESP100 & 3RB20, Special Use 958, Oil Field 958L, and ThermalApplicationFeatures▪ Solid State ESP100, 958 & 958LOverloads—Phase Loss Protection—TripsWithin 3 Seconds—Ambient Insensitive—Heaterless Design—Self-Powered—2% Repeat Trip Accuracy—NEMA Class 10, 20 & 30 TripCurves Available—FLA Adjustment Dial with WideAdjustment Range (Fig. 1)—Short Circuit Self Protected—Thermal Memory Circuit—Conformally Coated Circuit Board— –22°F to 159°F (–30°C to 70°C)—NC Contact Rated NEMA A600,P600 (10 Amps 600VAC Max.,5 Amps 600VDC Max.)—“Must Hold Amps” Adjustment Dial(958 only)▪ Ambient Compensated BimetalOverloads—Automatic or manual reset adjustment—A manual test button is provided totest the operation of the 3-poleoverload relay control contacts—15% nominal trip current adjustment—Accept either standard Class 20 orQuick Trip (NEMA Class 10) heaterelements without any otherchanges or adjustments—Available with a normally open contactfor an alarm circuit (SPDT) up to 60A—Compensated bimetal overload relaysprovide a constant trip time in ambienttemperatures from –20°F to170°F for a given heater rating▪ UL Listed File #E22655 or ComponentRecognized▪ CSA Certified File #LR6535▪ 3RB20 Solid State Overload Relay—Marking Strip—STOP button—1 NO and 1 NC contacts—Trip class 10 or 20—Test function and switch positionindicator—4:1 current adjustment dial e.g. 160-630A—Phase loss protection—Self-poweredESP100 Solid State OverloadsESP100 solid state overload relays areself powered, requiring no separate 120Vsource to power the circuit board. Theyprovide phase loss protection, fewerconnection points and high repeat tripaccuracy which results in longer motorlife and cost savings. NEMA Class 10, 20and 30 trip curves are available for avariety of applications.The ESP100 solid state overloadprovides phase loss protection for themotor by tripping within three secondsupon complete loss of one phase of athree phase motor branch circuit.Each overload has at least a 2:1 currentadjustment range with the adjustmentdial reading out in full load amps. Inaddition to the markings on the dialthere are audible clicks which allowfor extremely fine tuning.The heaterless construction of theseoverloads minimizes energy costsand the costs of cabinet ventilation orcooling. Solid state overloads can beused at temperatures from –30°C to70°C and are rated for 50Hz and60Hz applications.ESP100 panel mounted overloads canbe used to upgrade existing starterapplications where panel mountedthermal overloads are used. In addition,ESP100 overloads can be panelmounted when used with other typesof controllers, such as DP, IECcontactors, and soft starts.ESP100 overloads can be used on highvoltage applications, making them idealfor use with vacuum contactors andother high voltage control.ESP100 overloads can be retrofittedon existing contactors using the retrofitplate suffixes or on other brands usingthe plates listed in the competitive retrofitplates table on page 16-48.958 ESP100 Special Use Solid StateOverloads958 ESP100 special use solid stateoverloads provide excellent protectionof hermetically sealed compressors andGeneralartificially cooled motors which requireambient insensitivity and quick tripresponse times. Combined with aseries lockout relay, they can provideunsurpassed protection for hermeticallysealed compressor motors in airconditioning applications. The combinationof high trip speed, current adjustment, andease of installation makes it suitable forthese applications. The trip curves havebeen custom tailored to provide properoverload protection on such loads withoutcausing nuisance tripping.958 overload dials denote must holdamps. Must trip amps are 112% of themust hold setting.958L ESP100 Oil Field Solid StateOverload Relays958L ESP100 solid state overloads aredesigned specifically for the oil marketand the cyclical loads experienced withthese types of pumping applications.These overloads provide protectionon all standard motors, oil well pumpmotors, multi-torque connections,and ultra-high slip motors.Rotors can be damaged in 8 to 15seconds during motor stall conditionsif electrical power is not removed. Toprevent damage during motor stall,the 958L solid-state overload removespower in 7 seconds at 250% lockedrotor current. Therefore, die cast orfabricated rotors will be protectedfrom damage saving the user bothtime and money.Ambient Compensated BimetalOverloadsThese thermal type overload relays areused to protect motors from excessiveheat resulting from sustained motoroverloads, rapid motor cycling andstalled rotor conditions. Although thesedevices function based on thermalprinciples they are designed tocompensate for the ambient airtemperature surrounding the overload.This helps prevent the occurrence ofnuisance tripping when there are highsurrounding ambient temperatures.The percentage of overload determinesthe length of time required to open thecircuit.16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlFigure 127ESP100 Solid StateOverload958 or 958L Solid StateOverload2422201815TYPICAL SOLID-STATEOVERLOAD ADJUSTMENTDIAL MARKINGSAmbient CompensatedBimetal—Single Phaseand Three PhaseSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-4713

Overload RelaysSolid State and Thermal, Class 48, ESP100 and 3RB20SelectionOrdering InformationESP100 Solid StateOverload RelayAmbient CompensatedBimetal 3-PhaseOverload Relay3RB20 Solid StateOverload RelayFor Thermal Overloads, order heater elements by code number at $13.00 each. Field Modification Kits see page 16-79. Dimensions see page 16-108.To retrofit existing Thermal Furnas Brand Starters with the ESP100 Solid State OverloadRelay add the appropriate suffix to the end of the catalog number from the Retrofit Platestable shown below and also add $14.30 to the list price. Example: 48ASE3M201P. Or orderthe Plate Kit Separate 49ASMP1, 2, or 3.16CONTROLPRODUCTSSolid State—Class 48 ESP100, 3-Phase, Single Phase (Panel Mount and Replacement) Full Load Manual Reset Manual Reset Manual ResetAmp Frame Class 10 List Class 20 List Class 30 ListCurrent Range Phase Size Catalog Number Price $ Catalog Number Price $ Catalog Number Price $0.25–1 3 A 48ASA3M10 117.00 48ASA3M20 117.00 48ASA3M30 117.000.75–3 3 A 48ASB3M10 117.00 48ASB3M20 117.00 48ASB3M30 117.002.5–10 3 A 48ASD3M10 117.00 48ASD3M20 117.00 48ASD3M30 117.009–18 3 A1 48ASE3M10 117.00 48ASE3M20 117.00 48ASE3M30 117.0013–27 3 A1 48ASF3M10 117.00 48ASF3M20 117.00 48ASF3M30 117.0020–40 3 A1 48ASG3M10 151.00 48ASG3M20 151.00 48ASG3M30 151.0013–27 3 B 48BSF3M10 163.00 48BSF3M20 163.00 48BSF3M30 163.0022–45 3 B 48BSH3M10 163.00 48BSH3M20 163.00 48BSH3M30 163.0030–60 3 B 48BSJ3M10 198.00 48BSJ3M20 198.00 48BSJ3M30 198.0045–90 3 B 48BSK3M10 198.00 48BSK3M20 198.00 48BSK3M30 198.0057–115 3 B 48BSL3M10 289.00 48BSL3M20 289.00 48BSL3M30 289.0067–135 3 B 48BSM3M10 289.00 48BSM3M20 289.00 48BSM3M30 289.0081–162 3 B 48BSN3M10 289.00 48BSN3M20 289.00 48BSN3M30 289.00100–210 3 A 48ASS3M10 143.00 48ASS3M20 143.00 48ASS3M30 143.00100–270 3 A 48ASU3M10 143.00 48ASU3M20 143.00 48ASU3M30 143.00200–540 3 A 48ASX3M10 143.00 48ASX3M20 143.00 48ASX3M30 143.00250–750 3 A 48CSH3M10 143.00 48CSH3M20 143.00 48CSH3M30 143.00420–820 3 A 48CSY3M10 143.00 48CSY3M20 143.00 48CSY3M30 143.00420–1220 3 A 48CSZ3M10 143.00 48CSZ3M20 143.00 48CSZ3M30 143.000.25-1 1 A 48ASA1M10 107.00 48ASA1M20 107.00 48ASA1M30 107.000.75-3 1 A 48ASB1M10 107.00 48ASB1M20 107.00 48ASB1M30 107.002.5-10 1 A 48ASD1M10 107.00 48ASD1M20 107.00 48ASD1M30 107.005-16 1 A 48ASE1M10 107.00 48ASE1M20 107.00 48ASE1M30 107.00Solid State—3RB206, 3-Phase For Setting Manual/Automatic ResetContactor Range Class 10 List Class 20 ListSize Amps Catalog Number Price $ Catalog Number Price $5 55-250 3RB2066-1GC2 377.00 3RB2066-2GC2 397.00 6 160-630 3RB2066-1MC2 540.00 3RB2066-2MC2 560.00 NEMA & GeneralPurpose ControlAmbient Compensated Bimetal—Open Type Class 48 Single Phase, 3-Phase (Panel Mount Only) Amp Contact ListPoles Rating Auxiliary Contacts Rating Catalog Number Price $125 1 NC 48DA18AA4 38.005A (B600)60 1 NC48GA18AA4 56.00&100 1 NC48HA18AA4 72.005A (P300)180 1 NC48JA18AA4 117.0030 1 NC48DC38AA4 77.0010A (A600)30 1 NO/NC48DC39AA4 111.00&60 1 NC48GC38AA4 111.0035A (P300)60 1 NO/NC 48GC39AA4 147.00100 3 NC48HA38AA4 198.005A (B600) & 5A (P300)180 3 NC 48JA38AA4 285.00Retrofit Plates for Contactors, Class 48Replacement for Starter Sizes ESP100 Overload Frame Size Retrofit Plate Suffix Plate Kit Separate Price Adder $Size 00–1 3 ⁄4 A or A1 1P 49ASMP1 14.30Size 2, 2 1 ⁄2 B 2P 49ASMP2 14.30Size 3, 3 1 ⁄2 B 3P 49ASMP3 14.30Size 4 B 4P 49ASMP3 14.30 To determine frame size of replacement solid stateoverload, refer to retrofit plates table above. Temperature rating 20° to 60°C. Requires use of 300:5 Current Transformers–3 of97CT005. Requires use of 600:5 Current Transformers–3 of97CT008. Requires use of 1200:5 Current Transformers–3 of97CT012. Overload has busbar connections. Discount Code: IEC. Requires use of 750:5 Current Transformers–3 of97CT009. See note under Ordering Information to retrofitexisting Thermal Starters with ESP100 Solid StateOverload Relay. For replacement of Starter Mounted Overload Relay,refer to page 16-157.16-48Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Overload RelaysSpecial Use Solid State Overloads, Class 958 and 958LSelectionOrdering Information Field Modification Kits see page 16-79. Dimensions see page 16-108.Current TransformersRating Catalog No. List Price $150:5 97CT002 158.00200:5 97CT003 158.00250:5 97CT004 158.00300:5 97CT005 158.00400:5 97CT006 158.00600:5 97CT008 158.00750:5 97CT009 158.001200:5 97CT012 158.00Standard Class 958 — Manual Reset, Trip Curve AFull Load Amp For Use On Catalog ListCurrent Range Phase Controller Sizes Number Price $15–30 3 1– 1 3 ⁄4 958AA32A 323.0022–44 3 1 3 ⁄4 958BA32A 323.0033–66 3 2–3 958CA32A 374.0050–100 3 3 –3 1 ⁄2 958DA32A 374.0075–150 3 4 958EA32A 410.0090–180 3 4 958FA32A 430.00Oil Field Class 958L—Manual ResetFull Load Amp For Use On Catalog ListCurrent Range Phase Controller Sizes Number Price $5.6–11.6 3 0–1 3 ⁄4 958L109307U 158.007–14 3 0–1 3 ⁄4 958L109308U 158.0011–22 3 1, 1 3 ⁄4 958L109309U 158.0014–28 3 1, 1 3 ⁄4 958L109330U 158.0018–36 3 1 3 ⁄4 958L109331U 193.0020–40 3 1 3 ⁄4 958L109332U 193.0018–36 3 2–4 958L109313U 206.0028–56 3 2 1 ⁄2–4 958L109314U 239.0035–70 3 3–4 958L109329U 239.0043–86 3 3–4 958L109315U 239.0050–90 3 3–4 958L109311U 239.0060–126 3 4 958L109316U 330.0075–150 3 — 958L109312U 186.0084–174 3 — 958L109327U 186.00105–210 3 — 958L109328U 186.00132–264 3 — 958L109522U 186.00264–528 3 — 958L109523U 186.00Trip Curve A958L Trip Curve16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlTemperature rating 20° to 60°C.Discount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-49

16CONTROLPRODUCTSCurrent Sensitive RelayClass 97Features▪ Start Up Delay▪ Trip Delay▪ Overcurrent or Undercurrent TripApplications▪ Manual or Automatic ResetStart-up delay, trip delay and current trip(undercurrent trip on Model 97U andovercurrent trip on the Model 97A)adjustments are provided to match thecurrent sensitive relay to a specificapplication. Reset can be switch selectablefor manual or automatic.DescriptionThe Class 97 current sensitive relay is adevice that monitors motor current andprovides an instantaneous output if themotor current is over (Model 97A) orunder (Model 97U) an adjustable setpoint. These over or under current conditionsmay be the result of a change insystem status such as a jam, brokenbelt or dry well. Control voltage of 120VAC or 240V AC is required to operatethe relay. An SPDT, 2.5 amp relay outputcontact is provided. No currenttransformers are required below 100amps (56 amps for undercurrent relay).Electrical DataSupply Voltage:Start Up Time Delay:Trip Time Delay:Reset:Fault Indicator:Contact Rating:Wire Termination:Sensing Loop Wire Size:Operating Temperature Range:Set Point Repeatability:Current Transformers (Optional):100–140VAC, 60Hz(240VAC available)1–6 seconds. Begins when motorcurrent is above 10% of currenttrip point. Output is inhibited ifmotor current is below 10% ofcurrent set point.Model 97U0.5–2.5 secondsModel 97A0.2–2.5 secondsManual or Automaticswitch selectableLED, ON during fault1 SPDT, 2.5 amp @250VAC (NEMA C300)Saddle clampWire range: Two #12 to #18 gauge6 gauge maximumexcept 97AAF30102/0 gauge maximum25°C to 60°C2% over temperature rangeof 0° to 60°C4% over temperature rangeof 25° to 0°CRefer to page 16-49 for SelectionGeneralNEMA & GeneralPurpose ControlClass 97 Current Sensitive RelayOperationModel 97A—Overcurrent Sensitive RelayModel 97U—Undercurrent Sensitive Relay16-50Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Current Sensitive RelayClass 97SelectionOrdering Information For Current Transformers refer to page 16-49. Dimensions see pages 16-108. Wiring Diagrams see page 16-143.UndercurrentCurrentMaxTrip AmpContinuousReset Control Adjustment Hp Range Operation ListType Mounting Voltage Range @ 460VAC Current Catalog Number Price $2–7 3–7 1 ⁄ 2 125A 97UMM0207 388.00120VAC4–16 5–15 140A 97UMM0416 388.007–28 10–30 140A 97UMM0728 388.00Panel 14–56 20–60 140A 97UMM1456 388.00Mount 2–7 3–7 1 ⁄ 2 125A 97UMM0207G 388.00240VAC4–16 5–15 140A 97UMM0416G 388.007–28 10–30 140A 97UMM0728G 388.00Man/ 14–56 20–60 140A 97UMM1456G 388.00Auto 2–7 3–7 1 ⁄ 2 125A 97UMF0207 352.004–16 5–15 140A 97UMF0416 352.00120VACFree 7–28 10–30 140A 97UMF0728 352.00Standing 14–56 20–60 140A 97UMF1456 352.00240VAC4–16 5–15 140A 97UMF0416G 352.007–28 10–30 140A 97UMF0728G 352.00OvercurrentCurrentMaxTrip AmpContinuousReset Control Adjustment Hp Range Operation ListTypeTMounting Voltage Range @ 460VAC Current Catalog Number Price $2–7 3–7 1 ⁄ 2 125A 97AMM0207 388.004–16 5–15 140A 97AMM0416 388.00120VAC 7–28 10–30 140A 97AMM0728 388.00Panel 14–56 20–60 140A 97AMM1456 388.00Mount 30–100 30–75 140A 97AMM3010 388.002–7 3–7 1 ⁄ 2 125A 97AMM0207G 388.00240VAC 14–56 20–60 140A 97AMM1456G 388.00Man/ 30–100 30–75 140A 97AMM3010G 388.00Auto 2–7 3–7 1 ⁄ 2 125A 97AMF0207 352.004–16 5–15 140A 97AMF0416 352.00120VAC 7–28 10–30 140A 97AMF0728 352.0014–56 20–60 140A 97AMF1456 352.00Free 30–100 30–75 140A 97AMF3010 352.00Standing 2–7 3–7 1 ⁄ 2 125A 97AMF0207G 352.004–16 5–15 140A 97AMF0416G 352.00240VAC 7–28 10–30 140A 97AMF0728G 352.0014–56 20–60 140A 97AMF1456G 352.0030–100 30–75 140A 97AMF3010G 352.0016 CONTROLPRODUCTSNEMA & GeneralPurpose Control These catalog numbers can also be used on voltagesystems other than 460VAC by changing the Hp rangeproportionally.Discount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-51

16CONTROLPRODUCTSNEMA & GeneralPurpose ControlDuplex Heavy Duty ControllersClass 83FeaturesClass 84▪ Heavy Duty NEMA Starters▪ Solid State or Thermal OverloadRelays▪ Fusible or MCP▪ Heavy Duty Disconnect Handle▪ Flexibility with Field Modifications▪ Alternator Transfer on De-energization▪ UL Listed for Outdoor Use andService Equipment File #E14900ApplicationDuplex pump controls are designed toperform one or both of two distinctfunctions: duplexing and alternation. Theduplexing function provides capacity forsystem peaking or above normal demandwithout having the full motor capacityspinning at all times. It also providesstandby capacity for use when one ofthe motors or pumps is disabled. Theduplexing function is also referred to aslead/lag or main/standby. When twopumps or compressors are controlled bya duplex controller, they are started insequence as necessary to attain presetvalues of pressure, flow or liquid level.Two field devices such as pressureswitches or float switches provideelectrical signals to the duplex controller.One remote device is set to initiate thestarting of the lead motor. This motor israted to handle normal system demand.The second motor is usually the samerating and is referred to as the lag motor.It is only energized when the systemdemand is greater than the capacity ofthe lead motor. The lag motor is startedwhen the second remote device issignalling for more output than thelead motor can produce.The alternation function reverses the leadand lag mode for the two motors in aduplex system. Upon alternation the firstmotor as described above becomes thelag motor and the second motorassumes the lead function. Thealternation is usually programmed tooccur at any time both pumps come torest. The alternation function equalizeswear on the two machines and extendsthe life of seals and bearings.Enclosure TypesDuplex controllers are available inNEMA 1, 12/3/3R, 4 (painted) and4/4X (stainless) enclosures.Enclosures protect personnel fromcontact with live parts and dependingupon the construction, protect thecontrol in varying degrees from physicaldamage and harmful atmospheres. Allenclosures are supplied with corrosionresistant finishes.Heavy Duty StartersThese Duplex controllers use the samestarters described in the heavy dutystarter section of this catalog.ESP 100 solid state overload startersand ambient compensated bimetaloverload starters are available.Siemens Type ETI Circuit BreakerThe ETI circuit breaker is a devicedesigned specifically for applicationin motor circuits. The ETI is a magneticonly protective device designed toprovide protection against shortcircuit current.The instantaneous-only type ETI circuitbreaker employs adjustable magnetictrip settings to allow broader applicationranges and a higher degree of motorshort circuit protection.GeneralFeaturesTwo control transformers may beprovided for low voltage control tosafeguard personnel from high voltage.One transformer is required for eachstarter to provide independent controlcircuits.A Hand-Off-Auto selector switch for eachstarter may be mounted in the enclosuredoor or furnished separately for remotecontrol. Test push buttons or pilot lightsmay also be installed on the enclosure.Solid-state or Ambient CompensatedBimetal Overload Relays are supplied asstandard.New Heavy Duty DisconnectSwitchesThe disconnect switch that goes thedistance in durability, performance andreliability has been made even better togive you greater advantages:▪ Visible blades for the highest levelof safety▪ Double break switching action toreduce arcing, increase lifetime andeliminate the “electric hinge”▪ More rugged positive action switch▪ Oversized lugs are standard▪ Line side shield to help guardpersonnel from contact with live parts▪ Higher horsepower rating fordesign E high efficiency motors▪ Now UL listed for IIsco, Burndy andT&B crimp type lugs▪ The 200A switch now accepts up to300 MCM versus 250 MCM wire sizeIts rugged construction - with a highfault withstand rating of 100kA at 600VAC when fused with class R ratedfuses - meets the most stringentindustry standards set forth by theautomotive, petro-chemical, and pulpand paper industries. UL recognized andCSA certified, our disconnect switchesare available either non-fusible or fusiblewith class R and class J fuse clips.16-52Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Duplex Heavy Duty ControllersNon - Combination, Class 83SelectionOrdering Information Standard coil voltage supplied will be 120V, separate control. For non-alternator styles(see factory modifications) change the 9th character using the coil table. Heater elements for bimetal overloads see page 16-148 (6-Required). Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-126. Wiring Diagrams see page 16-141.Coil Table60Hz Voltage24 Separate Control J120 Separate Control F200–208 D220–240 G277 L440–480 H550–600 ELetter Replacement Parts see pages 16-155.Non-Combination (with Solid-State Overload)Max HpEnclosureNEMA 1 NEMA 12/3R NEMA 4 Painted NEMA 4/4X StainlessGeneral Purpose Industrial Use Watertight Watertight, Dust-tightOverload Weatherproof Dust-tight Corrosion Resistant200 230 460 575 NEMA Half Amp 304 Stainless SteelVolts Volts Volts Volts Size Size Range Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $1⁄61⁄61⁄31⁄2 0 — 0.25-1 83CSA92BF 1482.00 83CSA920F 1629.00 83CSA92EF 1956.00 83CSA92WF 3463.001⁄23⁄4 1 1 ⁄2 2 0 — 0.75-3 83CSB92BF 1482.00 83CSB920F 1629.00 83CSB92EF 1956.00 83CSB92WF 3463.002 2 5 5 0 — 2.5-10 83CSD92BF 1482.00 83CSD920F 1629.00 83CSD92EF 1956.00 83CSD92WF 3463.003 3 — — 0 — 9-18 83CSE92BF 1482.00 83CSE920F 1629.00 83CSE92EF 1956.00 83CSE92WF 3463.001⁄6 1⁄6 1⁄3 1⁄2 1 — 0.25-1 83DSA92BF 1577.00 83DSA920F 1723.00 83DSA92EF 2067.00 83DSA92WF 3575.001⁄23⁄4 1 1 ⁄2 2 1 — 0.75-3 83DSB92BF 1577.00 83DSB920F 1723.00 83DSB92EF 2067.00 83DSB92WF 3575.002 2 5 5 1 — 2.5-10 83DSD92BF 1577.00 83DSD920F 1723.00 83DSD92EF 2067.00 83DSD92WF 3575.003 3 10 10 1 — 9-18 83DSE92BF 1577.00 83DSE920F 1723.00 83DSE92EF 2067.00 83DSE92WF 3575.007 1 ⁄2 7 1 ⁄2 — — 1 — 13-27 83DSF92BF 1577.00 83DSF920F 1723.00 83DSF92EF 2067.00 83DSF92WF 3575.00— — 15 15 — 1 3 ⁄4 13-27 83ESF92BF 1835.00 83ESF920F 1981.00 83ESF92EF 2326.00 83ESF92WF 3834.0010 10 — — — 1 3 ⁄4 20-40 83ESG92BF 1835.00 83ESG920F 1981.00 83ESG92EF 2326.00 83ESG92WF 3834.00— — 15 20 2 — 13-27 83FSF92BF 2335.00 83FSF920F 2714.00 83FSF92EF 3360.00 83FSF92WF 4868.0010 15 25 25 2 — 22-45 83FSH92BF 2335.00 83FSH920F 2714.00 83FSH92EF 3360.00 83FSH92WF 4868.00— — 30 30 — 2 1 ⁄2 22-45 83GSH92BF 2791.00 83GSH920F 3282.00 83GSH92EF 4721.00 83GSH92WF 6229.0015 20 — — — 2 1 ⁄2 30-60 83GSJ92BF 2791.00 83GSJ920F 3282.00 83GSJ92EF 4721.00 83GSJ92WF 6229.00— — 30 40 3 — 30-60 83HSJ92BF 3170.00 83HSJ920F 3661.00 83HSJ92EF 5100.00 83HSJ92WF 6967.0025 30 50 50 3 — 45-90 83HSK92BF 3170.00 83HSK920F 3661.00 83HSK92EF 5100.00 83HSK92WF 6967.0030 40 75 75 — 3 1 ⁄2 57-115 83ISL92BF 5704.00 83ISL920F 7331.00 83ISL92EF 8994.00 83ISL92WF 10860.0040 50 100 100 4 — 67-135 83JSM92BF 6392.00 83JSM920F 8020.00 83JSM92EF 9683.00 83JSM92WF 11549.0016 CONTROLPRODUCTSNon-Combination (with Ambient Compensated Bimetal Overload)Max HpEnclosureNEMA 1 NEMA 12/3R NEMA 4 Painted NEMA 4/4X StainlessGeneral Purpose Industrial Use Watertight Watertight, Dust-tightWeatherproof Dust-tight Corrosion Resistant200 230 460 575 NEMA Half 304 Stainless SteelVolts Volts Volts Volts Size Size Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $3 3 5 5 0 — 83CP92BF81 1405.00 83CP920F81 1551.00 83CP92EF81 1877.00 83CP92WF81 3385.007 1 ⁄2 7 1 ⁄2 10 10 1 — 83DP92BF81 1498.00 83DP920F81 1645.00 83DP92EF81 1991.00 83DP92WF81 3498.0010 10 15 15 — 1 3 ⁄4 83EP92BF81 1758.00 83EP920F81 1905.00 83EP92EF81 2249.00 83EP92WF81 3756.0010 15 25 25 2 — 83FP92BF81 2256.00 83FP920F81 2636.00 83FP92EF81 3282.00 83FP92WF81 4789.0015 20 30 30 — 2 1 ⁄2 83GP92BF81 2714.00 83GP920F81 3205.00 83GP92EF81 4643.00 83GP92WF81 6151.0025 30 50 50 3 — 83HP92BF81 3093.00 83HP920F81 3584.00 83HP92EF81 5022.00 83HP92WF81 6888.0030 40 75 75 — 3 1 ⁄2 83IP92BF81 5626.00 83IP920F81 7254.00 83IP92EF81 8917.00 83IP920W81 10784.0040 50 100 100 4 — 83JP92BF81 6315.00 83JP920F81 7943.00 83JP92EF81 9605.00 83JP92WF81 11472.00NEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overloadamp range for the FLA’s (per the National ElectricCode) of typical industrial motors. All starter sizescarry one maximum Hp rating. NEMA 12 is field convertible to NEMA 3/3R. For conduithubs and conversion instructions, see page 16-87. Not available on standard alternator style ('92' in thecatalog number).Discount Schedule NEMA Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-53

Duplex Heavy Duty ControllersCombination Disconnect (Fusible & Non-Fusible), Class 84Ordering Information Standard coil voltage supplied will be 120V, separate control. For non-alternator styles (seefactory modifications) change the 10th character using the coil table. Heater elements for bimetal overloads see page 16-148 (6-Required). For factory installed fusible disconnect, see page 16-95. Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-126. Wiring Diagrams see page 16-141. Replacement Parts see pages 16-155.Coil Table60Hz VoltageSelection24 Separate Control J120 Separate Control F200–208 D220–240 G277 L440–480 H550–600 ELetter16CONTROLPRODUCTSTwo Disconnect Switches with Solid-State OverloadMax HpEnclosureNEMA 1 NEMA 12/3R NEMA 4 Painted NEMA 4X StainlessGeneral Purpose Industrial Use Watertight Watertight, Dust-tightWeatherproof Dust-tight Corrosion ResistantOverload Disc304 Stainless Steel200 230 460 575 NEMA Half Amp Amp Catalog List Catalog List Catalog List Catalog ListVolts Volts Volts Volts Size Size Range Rating Number Price $ Number Price $ Number Price $ Number Price $1⁄6 1⁄6 1⁄3 1⁄2 0 — 0.25-1 30 84CSA92BDF 2335.00 84CSA920DF 2791.00 84CSA92EDF 4152.00 84CSA92WDF 5660.001⁄2 3⁄4 1 1 ⁄2 2 0 — 0.75-3 30 84CSB92BDF 2335.00 84CSB920DF 2791.00 84CSB92EDF 4152.00 84CSB92WDF 5660.002 2 5 5 0 — 2.5-10 30 84CSD92BDF 2335.00 84CSD920DF 2791.00 84CSD92EDF 4152.00 84CSD92WDF 5660.003 3 — — 0 — 9-18 30 84CSE92BDF 2335.00 84CSE920DF 2791.00 84CSE92EDF 4152.00 84CSE92WDF 5660.001⁄6 1⁄6 1⁄3 1⁄2 1 — 0.25-1 30 84DSA92BDF 2430.00 84DSA920DF 2886.00 84DSA92EDF 4247.00 84DSA92WDF 5754.001⁄2 3⁄4 1 1 ⁄2 2 1 — 0.75-3 30 84DSB92BDF 2430.00 84DSB920DF 2886.00 84DSB92EDF 4247.00 84DSB92WDF 5754.002 2 5 5 1 — 2.5-10 30 84DSD92BDF 2430.00 84DSD920DF 2886.00 84DSD92EDF 4247.00 84DSD92WDF 5754.003 3 10 10 1 — 9-18 30 84DSE92BDF 2430.00 84DSE920DF 2886.00 84DSE92EDF 4247.00 84DSE92WDF 5754.007 1 ⁄2 7 1 ⁄2 — — 1 — 13-27 30 84DSF92BDF 2430.00 84DSF920DF 2886.00 84DSF92EDF 4247.00 84DSF92WDF 5754.00— — 15 15 — 1 3 ⁄4 13-27 60 84ESF92BDF 2688.00 84ESF920DF 3145.00 84ESF92EDF 4506.00 84ESF92WDF 6013.0010 10 — — — 1 3 ⁄4 20-40 60 84ESG92BDF 2688.00 84ESG920DF 3145.00 84ESG92EDF 4506.00 84ESG92WDF 6013.00— — 15 20 2 — 13-27 60 84FSF92BDF 3489.00 84FSF920DF 4135.00 84FSF92EDF 6298.00 84FSF92WDF 7806.0010 15 25 25 2 — 22-45 60 84FSH92BDF 3489.00 84FSH920DF 4135.00 84FSH92EDF 6298.00 84FSH92WDF 7806.00— — 30 30 — 2 1 ⁄2 22-45 100 84GSH92BDF 5022.00 84GSH920DF 5859.00 84GSH92EDF 9915.00 84GSH92WDF 11423.0015 20 — — — 2 1 ⁄2 30-60 100 84GSJ92BDF 5022.00 84GSJ920DF 5859.00 84GSJ92EDF 9915.00 84GSJ92WDF 11423.00— — 30 40 3 — 30-60 100 84HSJ92BDF 5401.00 84HSJ920DF 6238.00 84HSJ92EDF 10294.00 84HSJ92WDF 12161.0025 30 50 50 3 — 45-90 100 84HSK92BDF 5401.00 84HSK920DF 6238.00 84HSK92EDF 10294.00 84HSK92WDF 12161.0030 40 75 75 — 3 1 ⁄2 57-115 200 84ISL92BDF 9166.00 84ISL920DF 11483.00 84ISL92EDF 15420.00 84ISL92WDF 17287.0040 50 100 100 4 — 67-135 200 84JSM92BDF 9855.00 84JSM920DF 12174.00 84JSM92EDF 16109.00 84JSM92WDF 17976.00NEMA & GeneralPurpose ControlTwo Disconnect Switches with Ambient Compensated Bimetal OverloadMax HpEnclosureNEMA 1 NEMA 12/3R NEMA 4 Painted NEMA 4/4X StainlessGeneral Purpose Industrial Use Watertight Watertight, Dust-tightDisc Weatherproof Dust-tight Corrosion Resistant200 230 460 575 NEMA Half Amp 304 Stainless SteelVolts Volts Volts Volts Size Size Range Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $3 3 5 5 0 — 30 84CP92BDF81 2327.00 84CP920DF81 2714.00 84CP92EDF81 4075.00 84CP92WDF81 5582.007 1 ⁄2 7 1 ⁄2 10 10 1 — 30 84DP92BDF81 2352.00 84DP920DF81 2809.00 84DP92EDF81 4170.00 84DP92WDF81 5677.0010 10 15 15 — 1 3 ⁄4 60 84EP92BDF81 2610.00 84EP920DF81 3067.00 84EP92EDF81 4428.00 84EP92WDF81 5936.0010 15 25 25 2 — 60 84FP92BDF81 3411.00 84FP920DF81 4058.00 84FP92EDF81 6220.00 84FP92WDF81 7727.0015 20 30 30 — 2 1 ⁄2 100 84GP92BDF81 4944.00 84GP920DF81 5780.00 84GP92EDF81 9838.00 84GP92WDF81 11345.0025 30 50 50 3 — 100 84HP92BDF81 5324.00 84HP920DF81 6159.00 84HP92EDF81 10218.00 84HP92WDF81 12083.0030 40 75 75 — 3 1 ⁄2 200 84IP92BDF81 9089.00 84IP920DF81 11406.00 84IP92EDF81 15344.00 84IP92WDF81 17210.0040 50 100 100 4 — 200 84JP92BDF81 9778.00 84JP920DF81 12095.00 84JP92EDF81 16032.00 84JP92WDF81 17898.00Note: Hp’s shown above are based on the overloadamp range for the FLA’s (per the National ElectricCode) of typical industrial motors. All starter sizescarry one maximum Hp rating. NEMA 12 is field convertible to NEMA 3/3R. For conduithubs and conversion instructions, see page 16-87. Not available on standard alternator style('92' in the catalog number).16-54Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Duplex Heavy Duty ControllersCombination Circuit Breaker, Class 84Ordering Information Standard coil voltage supplied will be 120V, separate control. For non-alternator styles (seefactory modifications) change the 10th character using the coil table. Heater elements for bimetal overloads see page 16-148 (6-Required). Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-126. Wiring Diagrams see page 16-141. Replacement Parts see pages 16-155.Coil Table60Hz VoltageSelection24 Separate Control J120 Separate Control F200–208 D220–240 G277 L440–480 H550–600 ELetter2 Motor Circuit Protectors (with Solid-State Overload)Max HpEnclosureNEMA 1 NEMA 12/3R NEMA 4 Painted NEMA 4/4X StainlessGeneral Purpose Industrial Use Watertight Watertight, Dust-tightWeatherproof Dust-tight Corrosion ResistantOverloadCircuitMotor304 Stainless Steel200 230 460 575 NEMA Half Amp Interrupter Catalog List Catalog List Catalog List Catalog ListVolts Volts Volts Volts Size Size Range ETI Number Price $ Number Price $ Number Price $ Number Price $1⁄6 1⁄6 1⁄3 1⁄2 0 — 0.25-1 3 84CSA92BMF 3015.00 84CSA920MF 3472.00 84CSA92EMF 4833.00 84CSA92WMF 6341.001⁄2 3⁄4 1 1 ⁄2 2 0 — 0.75-3 3 84CSB92BMF 3015.00 84CSB920MF 3472.00 84CSB92EMF 4833.00 84CSB92WMF 6341.002 2 5 5 0 — 2.5-10 10 84CSD92BMF 3015.00 84CSD920MF 3472.00 84CSD92EMF 4833.00 84CSD92WMF 6341.003 3 — — 0 — 9-18 25 84CSE92BMF 3015.00 84CSE920MF 3472.00 84CSE92EMF 4833.00 84CSE92WMF 6341.001⁄6 1⁄6 1⁄3 1⁄2 1 — 0.25-1 3 84DSA92BMF 3110.00 84DSA920MF 3566.00 84DSA92EMF 4928.00 84DSA92WMF 6435.001⁄2 3⁄4 1 1 ⁄2 2 1 — 0.75-3 3 84DSB92BMF 3110.00 84DSB920MF 3566.00 84DSB92EMF 4928.00 84DSB92WMF 6435.002 2 5 5 1 — 2.5-10 10 84DSD92BMF 3110.00 84DSD920MF 3566.00 84DSD92EMF 4928.00 84DSD92WMF 6435.003 3 10 10 1 — 9-18 25 84DSE92BMF 3110.00 84DSE920MF 3566.00 84DSE92EMF 4928.00 84DSE92WMF 6435.007 1 ⁄2 7 1 ⁄2 — — 1 — 13-27 30 84DSF92BMF 3110.00 84DSF920MF 3566.00 84DSF92EMF 4928.00 84DSF92WMF 6435.00— — 15 15 — 1 3 ⁄4 13-27 40 84ESF92BMF 3378.00 84ESF920MF 3825.00 84ESF92EMF 5186.00 84ESF92WMF 6694.0010 10 — — — 1 3 ⁄4 20-40 50 84ESG92BMF 3378.00 84ESG920MF 3825.00 84ESG92EMF 5186.00 84ESG92WMF 6694.00— — 15 20 2 — 13-27 40 84FSF92BMF 4152.00 84FSF920MF 4798.00 84FSF92EMF 6962.00 84FSF92WMF 8468.0010 15 25 25 2 — 22-45 50 84FSH92BMF 4152.00 84FSH920MF 4798.00 84FSH92EMF 6962.00 84FSH92WMF 8468.00— — 30 30 — 2 1 ⁄2 22-45 50 84GSH92BMF 5384.00 84GSH920MF 6220.00 84GSH92EMF 10277.00 84GSH92WMF 11785.0015 20 — — — 2 1 ⁄2 30-60 100 84GSJ92BMF 5384.00 84GSJ920MF 6220.00 84GSJ92EMF 10277.00 84GSJ92WMF 11785.00— — 30 40 3 — 30-60 50 84HSJ92BMF 5763.00 84HSJ920MF 6599.00 84HSJ92EMF 10656.00 84HSJ92WMF 12523.0025 30 50 50 3 — 45-90 100 84HSK92BMF 5763.00 84HSK920MF 6599.00 84HSK92EMF 10656.00 84HSK92WMF 12523.0030 40 75 75 — 3 1 ⁄2 57-115 125 84ISL92BMF 11234.00 84ISL920MF 13543.00 84ISL92EMF 17489.00 84ISL92WMF 19355.0040 50 100 100 4 — 67-135 150 84JSM92BMF 11923.00 84JSM920MF 14232.00 84JSM92EMF 18178.00 84JSM92WMF 20043.0016 CONTROLPRODUCTS2 Motor Circuit Protectors (with Ambient Compensated Bimetal Overload)Max HpEnclosureNEMA 1 NEMA 12/3R NEMA 4 Painted NEMA 4/4X StainlessGeneral Purpose Industrial Use Watertight Watertight, Dust-tightMotorCircuitWeatherproof Dust-tight Corrosion Resistant304 Stainless Steel200 230 460 575 NEMA Half Interrupter Catalog List Catalog List Catalog List Catalog ListVolts Volts Volts Volts Size Size ETI Number Price $ Number Price $ Number Price $ Number Price $1⁄2 3⁄4 1 1 ⁄2 2 0 — 3 84CPB92BMF81 2938.00 84CPB920MF81 3394.00 84CPB92EMF81 4755.00 84CPB92WMF81 6263.002 2 5 5 0 — 10 84CPD92BMF81 2938.00 84CPD920MF81 3394.00 84CPD92EMF81 4755.00 84CPD92WMF81 6263.003 3 — — 0 — 25 84CPE92BMF81 2938.00 84CPE920MF81 3394.00 84CPE92EMF81 4755.00 84CPE92WMF81 6263.001⁄2 3⁄4 1 1 ⁄2 2 1 — 3 84DPB92BMF81 3032.00 84DPB920MF81 3489.00 84DPB92EMF81 4850.00 84DPB92WMF81 6358.002 2 5 5 1 — 10 84DPD92BMF81 3032.00 84DPD920MF81 3489.00 84DPD92EMF81 4850.00 84DPD92WMF81 6358.003 3 10 10 1 — 25 84DPE92BMF81 3032.00 84DPE920MF81 3489.00 84DPE92EMF81 4850.00 84DPE92WMF81 6358.007 1 ⁄2 7 1 ⁄2 — — 1 — 30 84DPF92BMF81 3032.00 84DPF920MF81 3489.00 84DPF92EMF81 4850.00 84DPF92WMF81 6358.00— — 15 15 — 1 3 ⁄4 40 84EPF92BMF81 3291.00 84EPF920MF81 3747.00 84EPF92EMF81 5108.00 84EPF92WMF81 6616.0010 10 — — — 1 3 ⁄4 50 84EPG92BMF81 3291.00 84EPG920MF81 3747.00 84EPG92EMF81 5108.00 84EPG92WMF81 6616.00— — 15 20 2 — 40 84FPF92BMF81 4075.00 84FPF920MF81 4721.00 84FPF92EMF81 6883.00 84FPF92WMF81 8391.0010 15 25 25 2 — 50 84FPH92BMF81 4075.00 84FPH920MF81 4721.00 84FPH92EMF81 6883.00 84FPH92WMF81 8391.00— — 30 30 — 2 1 ⁄2 50 84GPH92BMF81 5307.00 84GPH920MF81 6142.00 84GPH92EMF81 10201.00 84GPH92WMF81 11709.0015 20 — — — 2 1 ⁄2 100 84GPJ92BMF81 5307.00 84GPJ920MF81 6142.00 84GPJ92EMF81 10201.00 84GPJ92WMF81 11709.00— — 30 40 3 — 50 84HPJ92BMF81 5687.00 84HPJ920MF81 6522.00 84HPJ92EMF81 10580.00 84HPJ92WMF81 12446.0025 30 50 50 3 — 100 84HPK92BMF81 5687.00 84HPK920MF81 6522.00 84HPK92EMF81 10580.00 84HPK92WMF81 12446.0030 40 75 75 — 3 1 ⁄2 125 84IPL92BMF81 11157.00 84IPL920MF81 13465.00 84IPL92EMF81 17411.00 84IPL92WMF81 19278.0040 50 100 100 4 — 150 84JPM92BMF81 11846.00 84JPM920MF81 14155.00 84JPM92EMF81 18100.00 84JPM92WMF81 19967.00NEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overloadamp range for the FLA’s (per the National ElectricCode) of typical industrial motors. All starter sizescarry one maximum Hp rating. NEMA 12 is field convertible to NEMA 3/3R. For conduithubs and conversion instructions, see page 16-87. Not available on standard alternator style('92' in the catalog number).Discount Schedule NEMA Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-55

16CONTROLPRODUCTSNEMA & GeneralPurpose ControlPump Control PanelsClass 87, 88Features▪ Fully Gasketed NEMA 3R RainproofEnclosures▪ 100,000 Amp Interrupting Capacitywith Class R Fuses▪ Heavy Duty NEMA Starters▪ Solid State or Ambient CompensatedBimetal Overload Relays▪ Heavy Duty Disconnect Handle▪ Available in Reduced Voltage Versions▪ Bold Pilot Legend on Front▪ Generous Accessory Space▪ Copper Grounding Lug For Three#6 Wires▪ UL Listed for Outdoor Use andService Equipment File #E14900ApplicationHeavy duty pump control panels aredesigned to withstand the mostdemanding environments. Typicalapplications include irrigation, agriculture,petrochemical, wastewater treatmentand wherever motor control ischallenged by harsh elements.Rugged pump control panels utilizedcold forming “tox” process. They aremore rainproof, sleet and iceresistant than in the past.Installation is easy. Panels are factorywired to provide flexible control andprotect against short circuits andoverloads. Ample space is providedfor field modifications and installationof accessories.The pump control panels feature a fullsized removable auxiliary panel for themounting of accessories. The fusibleversion features fuse clips for full sizedRK5 or compact class J fuses andaccessory mounting space for themost commonly used accessories.Class 87 pump panels become jockeypump panels with the addition of apressure switch. The jockey pump’sprimary function is to maintain waterpressure at a preset level and thuscompensate for possible shortage ofwater in the pumping system. When thewater pressure drops below the presetlevel, the pressure switch energizes thestarter which in turn activates the jockeypump. The water pressure is thenbrought back up to the desired level. Thisinsures the maintenance of proper waterpressure at all times.GeneralFeaturesSpecified by Fortune 500 companies,ESP100 or thermal starters offerprolonged service under severe dutyconditions. NEMA rated, these startersutilize large silver cadmium oxidecontacts and wide copper heat sinksto ensure rapid heat dissipation andmaximum electrical life.ESP100 solid state overloadrelays provide phase loss protectionfor the motor by tripping within threeseconds upon complete loss of onephase in a three phase circuit. Eachoverload has a 2:1 (4:1 in lower ranges)FLA adjustment range with anadjustment dial reading out in FLA.This feature allows for extreme finetuning. Their heaterless constructionminimizes energy costs and costs ofcabinet ventilation or cooling. The class87 pump panel comes with class 10trip standard.The ambient compensated bimetaloverload relays are designed toparallel thermal characteristics of typicalpump motors. They prevent nuisancetrips that may result from operation ofthe control in a higher ambient temperaturethan that at the pump. These relaysare trip-free, tamperproof and can be setto reset automatically or manually.HOA and Start PushbuttonEvery pump panel comes with an HOAand a start pushbutton.Half Size StartersSiemens motor matched starters featureall the rugged performance characteristicsof our NEMA rated starter sizes, but arefractionally sized to more closely matchyour exact motor rating. As a result,significant economic savings are madepossible without sacrificing the reliabilityyou expect from a heavy duty starter.These additional starter sizes have thereserve capacity to handle occasionalplugging and jogging without de-ratingthe device.Siemens motor matched can save hundreds,even thousands of dollars per project.Siemens motor matched starters complywith NEMA, UL and CSA standards.16-56Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Pump Control PanelsClass 87, 88Panels are predrilled for easy repositioningof the fuse trailer block to accommodate250 and 600 volt fuses and full sized RKor compact J fuses. Circuit breakers arealso available.New Heavy Duty FusibleDisconnect SwitchThe disconnect switch has beenmade even better to give you greateradvantages:▪ Visible blades for the highestlevel of safety▪ Double Break Switching Actionto reduce arcing, increase lifetimeand eliminate the “electric hinge”▪ Oversized lugs are standard▪ Line side shield to help guardpersonnel from contact with live partsMotor Circuit ProtectorThe motor circuit protector provides fast,accurate fault clearing that will minimizedamage to the motor and controlapparatus and protect branch circuitconductors. Continuous current ratingsand adjustable trip ranges meet NECrequirements for full load and lockedrotor currents. The adjustableinstantaneous trip point can be setprecisely to assure fault protectionand eliminate nuisance tripping.Removable DoorEnclosure door may be lifted off to makewiring easier.Mounting FlangesConvenient flanges at top and bottomof the enclosure provide easy mounting.They fit pole or flat surfaces usingkeyhole slots.Quarter Turn LatchesQuarter turns are utilized to secure thedoor.Wind CatchesA wind catch is provided to prevent thedoor from slamming shut (or open) dueto high wind conditions.Safety Disconnect HandleUp to three padlocks can be used to lockthe disconnect in the OFF position.Maintenance work can be performedwithout hazard to personnel.External ResetThe overload relay may be quickly resetby means of a button on the front of theenclosure.Bold Pilot LegendProvides positive indication of theselector switch position for use tostop the pump motor.Ground LugsInsures proper connecting of groundwires and lightning arresters.UL ListedAssures proper construction throughoutcontrol panel.Reduced VoltageAvailable in part winding, wye delta andauto transformer types, these controlsmay be necessary where the powercompany limits the amount of currentdrawn from its lines, or where startingtorque must be reduced.Fully gasketed NEMA 3/12 weatherproofenclosures are supplied withClass 88 reduced voltage starters.Part Winding Starters apply startingcurrent in timed steps to minimizevoltage fluctuations.Auto Transformer Starters maintaina closed circuit during transition andeliminate voltage or current surges.They draw less current than part windingstarters and are well suited for startingmotors over 20 Hp.Wye Delta starters and motors areused in areas where the power supply isinadequate to supply full starting currentwithout objectionable voltage drop or forapplications where low starting torque isrequired. Centrifugal pumps and similarapparatus requiring a low starting torqueare typical applications. Both ends of allthree windings of the wye delta motorare brought out so that they may beaccessible for reconnecting from wyeto delta.GeneralAuxiliary EquipmentPilot Lights are easily installed on theenclosure. Oil Tight and Heavy Duty, theymeet NEMA A600 requirements.Lightning Arresters protect the controlpanel from lightning induced surges.Undervoltage and Phase SensingRelays protect the pump against lowvoltage, voltage imbalance, loss of phaseand phase reversal.Anti-Backspin Timers prevent themotor from starting during motor/shaftbackspin.The TOX BoxSiemens uses the TOX process tomanufacture the enclosures for thepump panels.Advantages of the TOX process:▪ Joints are 50-70% stronger▪ Since the TOX process compressesthe metal at the joint, it does notleave the high stresses in the metal▪ Increased corrosion resistance.The protective layer on the metal isnot damaged in the process, butinstead flows with the materialClass 87 NEMA Vacuum StarterPump Control PanelsThe Siemens vacuum starter pumpcontrollers are designed for the harshestenvironments. Typical environmentsinclude chemical, petrochemical, wastewater treatment and mining.Contaminations present in thesesevere environments are detrimentalto conventional air-break contactsdecreasing their life expectancy andreliability. The Siemens vacuum starterpump controllers are well suited forthese environments because thecontacts are contained in hermeticallysealed contact tubes. This preventscontaminates in the atmosphere fromaffecting the operation of the contacts.Additionally, neither arcs nor arcinggases are produced which dramaticallyincreases the electrical endurance ofthe contacts.16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-57

Pump Control PanelsStandard Pump Panel with Solid State Overload, Class 87Selection16CONTROLPRODUCTSNEMA & GeneralPurpose ControlOrdering Information Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-127. Wiring Diagrams see page 16-143. Replacement Parts see pages 16-155. Sizes 1-4 will be supplied standard with a 240/480 volt coil. To change the coil voltage,change the 8th character in the catalog number to the letter shown in the coil table. Sizes 5 & 6 will be supplied standard with a 480 volt coil. To change the coil voltage, changethe 8th character in the catalog number to the letter shown in the coil table.Coil Table60Hz VoltageLetter24 Separate Control J120 Separate Control F110–120/220–240 A 200–208 D220–240 G220–240/440–480 C 277 L440–480 H550–600 EFusible DisconnectMax HP Overload Disc Fuse Clip200V 230V 460V 575V NEMA Size Half Size Amp Range Amp Rating Amps/Volts Catalog Number List Price $— — 1 1 1 — 0.75-3 30 30A/600V 87DSB6FC 1137.00— — 5 5 1 — 2.5-10 30 30A/600V 87DSD6FC 1137.00— — 7 1 ⁄2 10 1 — 9-18 30 30A/600V 87DSE6FC 1137.00— — 7 1 ⁄2 10 1 — 9-18 60 60A/600V 87DSE60C 1154.00— — 15 15 — 1 3 ⁄4 13-27 30 30A/600V 87ESF6FC 1336.00— — 15 15 — 1 3 ⁄4 13-27 60 60A/600V 87ESF60C 1353.00— — 15 20 2 — 13-27 60 60A/600V 87FSF6FC 1533.00— — 25 25 2 — 22-45 60 60A/600V 87FSH6FC 1533.00— — 25 25 2 — 22-45 100 100A/600V 87FSH60C 1629.00— — 30 30 — 2 1 ⁄2 22-45 60 60A/600V 87GSH6FC 2188.00— — 30 30 — 2 1 ⁄2 22-45 100 100A/600V 87GSH60C 2284.00— — 50 50 3 — 45-90 100 100A/600V 87HSK6FC 2473.00— — 50 50 3 — 45-90 200 200A/600V 87HSK60C 2653.00— — 75 75 — 3 1 ⁄2 57-115 200 200A/600V 87ISL6FC 4204.00— — 100 100 4 — 67-135 200 200A/600V 87JSM6FC 4549.00— — 200 200 5 — 100-270 400 400A/600V 87KSU6FH 9890.00— — 250 — 6 — 200-540 600 600A/600V 87MSW6FH 24970.002 2 — — 1 — 2.5-10 30 30A/250V 87DSD6LC 1120.003 3 — — 1 — 9-18 30 30A/250V 87DSE6LC 1120.007 1 ⁄2 7 1 ⁄2 — — 1 — 13-27 30 30A/250V 87DSF6LC 1120.007 1 ⁄2 7 1 ⁄2 — — 1 — 13-27 60 60A/250V 87DSF6PC 1137.0010 10 — — — 1 3 ⁄4 20-40 60 60A/250V 87ESG6LC 1336.0010 15 — — 2 — 22-45 60 60A/250V 87FSH6LC 1508.0010 15 — — 2 — 22-45 100 100A/250V 87FSH6PC 1612.0015 20 — — — 2 1 ⁄2 30-60 60 60A/250V 87GSJ6LC 2128.0015 20 — — — 2 1 ⁄2 30-60 100 100A/250V 87GSJ6PC 2231.0025 30 — — 3 — 45-90 100 100A/250V 87HSK6LC 2421.0025 30 — — 3 — 45-90 200 200A/250V 87HSK6PC 2619.0030 40 — — — 3 1 ⁄2 57-115 200 200A/250V 87ISL6LC 4170.0040 50 — — 4 — 67-135 200 200A/250V 87JSM6LC 4514.0075 100 — — 5 — 55-250 400 400A/250V 87KSU6LH 9683.00Circuit BreakerMax HPMotor CircuitOverload Interrupter200V 230V 460V 575V NEMA Size Half Size Amp Range ETI Amps Catalog Number List Price $1/2 1/2 1 1 1 — 0.75-3 3 87DSB6MC 1430.001 1 3 3 1 — 2.5-10 10 87DSC6MC 1430.002 2 5 5 1 — 2.5-10 10 87DSD6MC 1430.003 3 7 1 ⁄2 10 1 — 9-18 25 87DSE6MC 1430.007 1 ⁄2 7 1 ⁄2 10 — 1 — 13-27 30 87DSF6MC 1430.00— — 15 15 — 1 3 ⁄4 13-27 40 87ESF6MC 1602.0010 10 — — — 1 3 ⁄4 20-40 50 87ESG6MC 1602.00— — 15 20 2 — 13-27 40 87FSF6MC 1774.0010 15 25 25 2 — 22-45 50 87FSH6MC 1774.00— — 30 30 — 2 1 ⁄2 22-45 50 87GSH6MC 2317.0015 20 — — — 2 1 ⁄2 30-60 100 87GSJ6MC 2317.0025 30 50 50 3 — 45-90 100 87HSK6MC 2507.0030 40 75 75 — 3 1 ⁄2 57-115 125 87ISL6MC 4962.0040 50 100 100 4 — 67-135 150 87JSM6MC 5307.0050 75 150 200 5 — 55-250 250 87KST6MH 12070.0075 100 200 200 5 — 55-250 400 87KSU6MH 12070.00100 125 250 300 6 — 160-540 400 87MSW6MH 26168.00150 200 400 400 6 — 160-540 600 87MSX6MH 30084.00Note: Hp’s shown above are based on the overload Not available on Size 5 and larger. For an overload amp range of 0.25-1A, change the 5thamp range for the FLA’s (per the National Electriccharacter from a ‘B’ to an ‘A’.Code) of typical industrial motors. All starter sizescarry one maximum Hp rating.16-58 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Pump Control PanelsPump Panel with Ambient Compensated Bimetal Overload, Class 87Ordering Information Heater elements for bimetal overloads see page 16-148 (6-Required). Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-127. Wiring Diagrams see page 16-143. Replacement Parts see pages 16-155. Sizes 1-4 will be supplied standard with a 230/480 volt coil. To change the coilvoltage, change the 8th character in the catalog number to the letter shown inthe coil table. Sizes 5 & 6 will be supplied standard with a 480 volt coil. To change the coilvoltage, change the 8th character in the catalog number to the letter shownin the coil table.Coil Table60Hz VoltageSelectionLetter24 Separate Control J120 Separate Control F110–120/220–240 A 200–208 D220–240 G220–240/440–480 C 277 L440–480 H550–600 EFusible DisconnectMax HP Disc Fuse Clip200V 230V 460V 575V NEMA Size Half Size Amp Rating Amps/Volts Catalog Number List Price $— — 10 10 1 — 30 30A/600V 87DAE6FC 1098.00— — 10 10 1 — 60 60A/600V 87DAE60C 1116.00— — 15 15 — 1 3 ⁄4 30 30A/600V 87EAF6FC 1296.00— — 15 15 — 1 3 ⁄4 60 60A/600V 87EAF60C 1314.00— — 25 25 2 — 60 60A/600V 87FAJ6FC 1495.00— — 25 25 2 — 100 100A/600V 87FAJ60C 1589.00— — 30 30 — 2 1 ⁄2 60 60A/600V 87GAK6FC 2149.00— — 30 30 — 2 1 ⁄2 100 100A/600V 87GAK60C 2244.00— — 50 50 3 — 100 100A/600V 87HAN6FC 2433.00— — 50 50 3 — 200 200A/600V 87HAN60C 2614.00— — 75 75 — 3 1 ⁄2 200 200A/600V 87IAP6FC 4165.00— — 100 100 4 — 200 200A/600V 87JAR6FC 4510.007 1 ⁄2 7 1 ⁄2 — — 1 — 30 30A/250V 87DAE6LC 1082.007 1 ⁄2 7 1 ⁄2 — — 1 — 60 60A/250V 87DAE6PC 1098.0010 10 — — — 1 3 ⁄4 60 60A/250V 87EAG6LC 1296.0010 15 — — 2 — 60 60A/250V 87FAJ6LC 1469.0010 15 — — 2 — 100 100A/250V 87FAJ6PC 1572.0015 20 — — — 2 1 ⁄2 100 100A/250V 87GAL6LC 2192.0025 30 — — 3 — 100 100A/250V 87HAN6LC 2381.0025 30 — — 3 — 200 200A/250V 87HAN6PC 2580.0030 40 — — — 3 1 ⁄2 200 200A/250V 87IAP6LC 4131.0040 50 — — 4 — 200 200A/250V 87JAR6LC 4475.00Circuit BreakerMax HPMotor CircuitInterrupter200V 230V 460V 575V NEMA Size Half Size ETI Amps Catalog Number List Price $1⁄21⁄2 1 1 1 — 3 87DAA6MC 1391.001 1 3 3 1 — 10 87DAB6MC 1391.003 3 7 1 ⁄2 7 1 ⁄2 1 — 25 87DAD6MC 1391.007 1 ⁄2 7 1 ⁄2 10 10 1 — 30 87DAE6MC 1391.007 1 ⁄2 7 1 ⁄2 15 15 — 1 3 ⁄4 40 87EAF6MC 1563.0010 10 — — — 1 3 ⁄4 50 87EAG6MC 1720.00— — 15 20 2 — 40 87FAH6MC 1736.0010 15 25 25 2 — 50 87FAJ6MC 1736.00— — 30 30 — 2 1 ⁄2 50 87GAK6MC 2278.0015 20 — — — 2 1 ⁄2 100 87GAL6MC 2278.0025 30 50 50 3 — 100 87HAN6MC 2468.0030 40 75 75 — 3 1 ⁄2 125 87IAP6MC 4923.0040 50 100 100 4 — 150 87JAR6MC 5268.0016 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overloadamp range for the FLA’s (per the National ElectricCode) of typical industrial motors. All starter sizescarry one maximum Hp rating. Not available on Size 5 or above.Discount Schedule NEMA Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-59

Reduced Voltage Pump PanelsAuto Transformer & Part winding (2 Step) with Solid State Overload, Class 88SelectionOrdering Information Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-127. Wiring Diagrams see page 16-143. Replacement Parts see pages 16-155.Coil and Control VoltageThe coil voltage on the contactors will bethe motor voltage. A CPT will be suppliedto provide the control voltage. The controlvoltage will be 120V.To change the control voltage to customersupplied (no CPT included), change the9th character to the following:for 24V , use ”J”for 120V, use ”F”Auto Transformer TypeFusible DisconnectCircuit BreakerMotor Max OL amp NEMA Half Fuse Clip Size List Circuit Breaker ListVoltage Hp range Size Size Amps/Volts Catalog Number Price $ Amps Catalog Number Price $230 15 22-45 2 — 60A/250V 88FSHT2FG 7159.00 50 88FSHT2MG 7254.0020 30-60 — 2 1 ⁄2 100A/250V 88GSJT2FG 9683.00 100 88GSJT2MG 9880.0030 45-90 3 — 100A/250V 88HSKT2FG 10334.00 100 88HSKT2MG 11320.0040 57-115 — 3 1 ⁄2 200A/250V 88ISLT2FG 14680.00 125 88ISLT2MG 16213.0050 67-135 4 — 200A/250V 88JSMT2FG 15506.00 150 88JSMT2MG 17042.0075 100-210 5 — — — — 250 88KSST2MG 26740.00100 100-270 5 — 400A/250V 88KSUT2FG 26853.00 400 88KSUT2MG 28706.00200 200-540 6 — — — — 600 88MSXT2MH 48033.00460 25 22-45 2 — 60A/600V 88FSHT4FH 7634.00 50 88FSHT4MH 7757.0030 22-45 — 2 1 ⁄2 60A/600V 88GSHT4FH 10045.00 50 88GSHT4MH 10144.0050 45-90 3 — 100A/600V 88HSKT4FH 10700.00 100 88HSKT4MH 11230.0075 57-115 — 3 1 ⁄2 200A/600V 88ISLT4FH 15179.00 125 88ISLT4MH 16412.00100 67-135 4 — 200A/600V 88JSMT4FH 16936.00 150 88JSMT4MH 17446.00150 55-250 5 — — — — 250 88KSST4MH 27464.00200 55-250 5 — 400A/600V 88KSUT4FH 29592.00 400 88KSUT4MH 31032.00400 160-540 6 — 600A/600V 88MSXT4FH 43290.00 600 88MSXT4MH 48029.0016CONTROLPRODUCTSNEMA & GeneralPurpose ControlPart Winding 2 StepFusible DisconnectCircuit BreakerMotor Max OL amp NEMA Half Fuse Clip Size List Circuit Breaker ListVoltage Hp range Size Size Amps/Volts Catalog Number Price $ Amps Catalog Number Price $230 20 20-40 — 1 3 ⁄4 100A/250V 88ESGP2FG 4282.00 100 88ESGP2MG 4014.0025 22-45 2 — 100A/250V 88FSHP2FG 4635.00 100 88FSHP2MG 4489.0040 30-60 — 2 1 ⁄2 200A/250V 88GSJP2FG 6548.00 100 88GSJP2MG 6376.0050 45-90 3 — 200A/250V 88HSKP2FG 7099.00 150 88HSKP2MG 6927.0060 57-115 — 3 1 ⁄2 200A/250V 88ISLP2FG 12578.00 250 88ISLP2MG 13543.0075 67-135 4 — 400A/250V 88JSMP2FG 13276.00 250 88JSMP2MG 14232.00125 100-210 5 — — — — 400 88KSSP2MG 25078.00150 100-270 5 — 600A/250V 88KSUP2FG 25672.00 600 88KSUP2MG 26285.00460 30 13-27 — 1 3 ⁄4 100A/600V 88ESFP4FH 4282.00 50 88ESFP4MH 4014.0040 22-45 2 — 100A/600V 88FSHP4FH 4635.00 100 88FSHP4MH 4489.0060 30-60 — 2 1 ⁄2 200A/600V 88GSJP4FH 6548.00 100 88GSJP4MH 6376.0075 30-60 3 — 200A/600V 88HSJP4FH 7099.00 125 88HSJP4MH 6927.00100 57-115 — 3 1 ⁄2 200A/600V 88ISLP4FH 12578.00 150 88ISLP4MH 13543.00150 67-135 4 — 400A/600V 88JSMP4FH 13276.00 250 88JSMP4MH 14232.00250 55-250 5 — — — — 400 88KSSP4MH 26285.00350 55-250 5 — 600A/600V 88KSUP4FH 25672.00 600 88KSUP4MH 47288.00Note: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating.16-60Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Reduced Voltage Pump PanelsWye Delta with Solid State Overload, Class 88Ordering Information Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-127. Wiring Diagrams see page 16-143. Replacement Parts see pages 16-155.SelectionCoil and Control VoltageThe coil voltage on the contactors will bethe motor voltage. A CPT will be suppliedto provide the control voltage. The controlvoltage will be 120V.To change the control voltage to customersupplied (no CPT included), change the9th character to the following:for 24V , use ”J”for 120V, use ”F”Wye DeltaOpen TransitionClosed TransitionFusible Disconnect Circuit Breaker Fusible Disconnect Circuit BreakerFuse ClipMotor NEMA Half Amps/ MCP Catalog List Catalog List Catalog List Catalog ListVoltage Max Hp Size Size Volts Amps Number Price $ Number Price $ Number Price $ Number Price $10 1 — 60A/250V 50 88DSF06FD 5384.00 88DSF06MD 5719.00 88DSFC6FD 6944.00 88DSFC6MD 7280.0015 — 1 3 ⁄4 100A/250V 100 88ESG06FD 6048.00 88ESG06MD 6022.00 88ESGC6FD 7341.00 88ESGC6MD 7624.0020 2 — 100A/250V 100 88FSH06FD 6892.00 88FSH06MD 6608.00 88FSHC6FD 8167.00 88FSHC6MD 8219.0030 — 2 1 ⁄2 200A/250V 125 88GSJ06FD 8640.00 88GSJ06MD 8744.00 88GSJC6FD 10166.00 88GSJC6MD 10613.00200V 40 3 — 200A/250V 150 88HSK06FD 9304.00 88HSK06MD 9752.00 88HSKC6FD 11269.00 88HSKC6MD 11716.0050 — 3 1 ⁄2 200A/250V 250 88ISL06FD 16351.00 88ISL06MD 17463.00 88ISLC6FD 18789.00 88ISLC6MD 20331.0060 4 — 400A/250V 250 88ISL06FD 16351.00 88JSM06MD 18496.00 88ISLC6FD 18789.00 88JSMC6MD 21779.0075 5 — 400A/250V 400 88KSS06FD 25506.00 88KSS06MD 29820.00 88KSSC6FD 34060.00 88KSSC6MD 33974.00150 5 — 600A/250V 600 88KSU06FD 30833.00 88KSU06MD 30282.00 88KSUC6FD 35141.00 88KSUC6MD 34590.00300 6 — — 800 — — 88MSX06MD 56221.00 — — 88MSXC6MD 66766.0010 1 — 60A/250V 50 88DSF02FG 5384.00 88DSF02MG 5719.00 88DSFC2FG 6944.00 88DSFC2MG 7280.0015 — 1 3 ⁄4 60A/250V 50 88ESG02FG 5952.00 88ESG02MG 6022.00 88ESGC2FG 7245.00 88ESGC2MG 7624.0025 2 — 100A/250V 100 88FSH02FG 6892.00 88FSH02MG 6608.00 88FSHC2FG 8167.00 88FSHC2MG 8219.0030 — 2 1 ⁄2 200A/250V 100 88GSJ02FG 8640.00 88GSJ02MG 8744.00 88GSJC2FG 10166.00 88GSJC2MG 10613.00230V 50 3 — 200A/250V 150 88HSK02FG 9304.00 88HSK02MG 9752.00 88HSKC2FG 11269.00 88HSKC2MG 11716.0060 — 3 1 ⁄2 200A/250V 250 88ISL02FG 16351.00 88ISL02MG 17463.00 88ISLC2FG 18789.00 88ISLC2MG 20331.0075 4 — 400A/250V 250 88JSM02FG 16953.00 88JSM02MG 18496.00 88JSMC2FG 20237.00 88JSMC2MG 21779.00100 5 — 400A/250V 400 88KSS02FG 25506.00 88KSS02MG 29820.00 88KSSC2FG 34060.00 88KSSC2MG 33974.00150 5 — 600A/250V 600 88KSU02FG 30833.00 88KSU02MG 30282.00 88KSUC2FG 35141.00 88KSUC2MG 34590.00350 6 — — 1200 — — 88MSX02MG 56221.00 — — 88MSXC2MG 66766.0015 1 — 60A/600V 30 88DSE04FH 5384.00 88DSE04MH 5719.00 88DSEC4FH 6944.00 88DSEC4MH 7280.0030 — 1 3 ⁄4 60A/600V 50 88ESF04FH 5970.00 88ESF04MH 6022.00 88ESFC4FH 7262.00 88ESFC4MH 7624.0040 2 — 100A/600V 100 88FSH04FH 6548.00 88FSH04MH 6608.00 88FSHC4FH 8348.00 88FSHC4MH 8408.0060 — 2 1 ⁄2 200A/600V 100 88GSJ04FH 8296.00 88GSJ04MH 8744.00 88GSJC4FH 10355.00 88GSJC4MH 10803.00460V 75 3 — 200A/600V 125 88HSK04FH 8296.00 88HSK04MH 9752.00 88HSKC4FH 10355.00 88HSKC4MH 12639.00100 — 3 1 ⁄2 200A/600V 150 88ISL04FH 14232.00 88ISL04MH 17463.00 88ISLC4FH 19427.00 88ISLC4MH 21296.00150 4 — 400A/600V 250 88JSM04FH 16953.00 88JSM04MH 18496.00 88JSMC4FH 20995.00 88JSMC4MH 22537.00200 5 — 400A/600V 400 88KSS04FH 25506.00 88KSS04MH 29820.00 88KSSC4FH 34835.00 88KSSC4MH 34749.00300 5 — 600A/600V 600 88KSU04FH 30833.00 88KSU04MH 30282.00 88KSUC4FH 37009.00 88KSUC4MH 36458.00700 6 — — 1200 — — 88MSX04MH 56221.00 — — 88MSXC4MH 66766.0015 1 — 60A/600V 30 88DSE05FE 5384.00 88DSE05ME 5719.00 88DSEC5FE 6944.00 88DSEC5ME 7280.0030 — 1 3 ⁄4 60A/600V 50 88ESF05FE 5970.00 88ESF05ME 6022.00 88ESFC5FE 7262.00 88ESFC5ME 7624.0040 2 — 60A/600V 50 88FSF05FE 6548.00 88FSF05ME 6608.00 88FSFC5FE 8348.00 88FSFC5ME 8408.0060 — 2 1 ⁄2 100A/600V 100 88GSH05FE 8296.00 88GSH05ME 8744.00 88GSHC5FE 10355.00 88GSHC5ME 10803.00575V 75 3 — 200A/600V 125 88HSJ05FE 9304.00 88HSJ05ME 9752.00 88HSJC5FE 12190.00 88HSJC5ME 12639.00100 — 3 1 ⁄2 200A/600V 150 88ISK05FE 14232.00 88ISK05ME 17463.00 88ISKC5FE 19427.00 88ISKC5ME 21296.00150 4 — 400A/600V 250 88JSM05FE 14232.00 88JSM05ME 18496.00 88JSMC5FE 19427.00 88JSMC5ME 22537.00200 5 — 400A/600V 400 88KSS05FE 25506.00 88KSS05ME 29820.00 88KSSC5FE 34835.00 88KSSC5ME 34749.00300 5 — 600A/600V 400 88KSU05FE 30833.00 88KSU05ME 30282.00 88KSUC5FE 37009.00 88KSUC5ME 36458.00700 6 — — 1200 — — 88MSX05ME 56221.00 — — 88MSXC5ME 66766.0016 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating.Discount Schedule NEMA Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-61

Vacuum Starter Pump PanelsWith Solid-State Overload Relay, Class 87Ordering Information Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-127. Wiring Diagrams see page 16-143. Replacement Parts see pages 16-155. Sizes 4-6 will be supplied standard with a 480 volt coil. To changethe coil voltage, change the 8th character in the catalog number tothe letter shown in the coil table.Coil TableSelection60Hz Voltage ***24 Separate Control J120 Separate Control F200–208 D220–240 G277 L440–480 H550–600 EFusible DisconnectMax HpFuse Clip460 Volts 575 Volts NEMA Size Overload Range Amps/Volts Catalog Number List Price $100 100 4 55-250A 200A/600V 87JCM4F* 7894.00200 200 5 55-250A 400A/600V 87KCU4F* 12707.00Circuit BreakerMax HpCircuit Breaker460 Volts 575 Volts NEMA Size Overload Range Rating Amps Catalog Number List Price $100 100 4 55-250A 250A 87JCM4M* 8734.00200 200 5 55-250A 400A 87KCT4M* 15002.00250 300 6 160-540A 400A 87MCW4M* 33467.00400 400 6 160-540A 600A 87MCX4M* 33467.00NEMA & GeneralPurpose ControlCONTROLPRODUCTS16Note: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating.16-62Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Reduced Voltage Heavy Duty StartersFeatures and BenefitsSiemens manufactures the three commonlyused electromechanical reducedvoltage starters. Each one is designedfor specific application requirementsand consists of auto transformer,wye-delta and partwinding starters.The reduced voltage starter:▪ Reduces inrush current▪ Provides smoother acceleration of theload▪ Reduces starting torque▪ Reduces stresses on mechanicallinkagesGeneralCombination and non-combinationreduced voltage starter sizes rangefrom 0 to 6 including Siemens exclusivemotormatched half-sizes. Enclosuretypes include 1, 3R/12, 4 painted and4/4X stainless steel. All starters are ULlisted and CSA certified.Auto Transformer Starter▪ Maximum torque per amp▪ Three coil auto transformer for balancedstarting currents▪ 50, 65 and 80% voltage taps▪ Closed circuit transition▪ Adjustable starting time▪ ESP100 overload as standard▪ CPT supplied as standard▪ Wide range of factory modificationsWye-Delta Starter▪ Lowest starting torque▪ Closed or open circuit transition▪ Adjustable starting time▪ ESP100 overload as standard▪ CPT supplied as standard▪ Wide range of factory modificationsPart-Winding Starter▪ Simplest design – most economical▪ Adjustable starting time▪ ESP100 overload as standard▪ CPT supplied as standard▪ Wide range of factory modifications16 CONTROLPRODUCTSVarious Methods of Electro-Mechanical Reduced Voltage Motor Starting—A General ComparisonAutotransformer Part-Winding Wye-Delta50% 65% 80%Characteristic Tap Tap Tap 2 stepStarting current drawn fromline as % of that which would 25% 42% 64% 65% 33%be drawn upon full voltagestartingStarting current drawn by themotor50% 65% 80% 65% 58%Starting torque developed as25% 42% 64% 40% 33%% of that which would beIncreases slightlydeveloped on full voltagewith speedstartingSmoothness of acceleration First in order of Third in order of Second in order ofSmoothness Smoothness SmoothnessAllowable accelerating times 15 seconds at 200HP(typical) max. or 30 seconds on 5 seconds max. 5-60 seconds200HP based on Limited by motor Limited by motorNEMA medium duty design designtransformersStarting current and torque Adjustable within limitsand adjustmentsof various tapsFixedFixedNEMA & GeneralPurpose ControlSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-63

Reduced Voltage Heavy Duty StartersAuto Transformer with Solid State Overload, Class 36 & 37Ordering Information Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-125. Wiring Diagrams see page 16-136. Replacement Parts see page 16-155. For additional enclosure options see page 16-97.Coil and Control VoltageSelectionThe coil voltage will always match themotor voltage.As standard, a CPT is supplied and 120Vcontrol voltage is utilized.To change to 120V separate controlvoltage (CPT not supplied), change the9th character to “F”.To change to 24VAC separate controlvoltage (CPT not supplied), change the9th character to “J”.16CONTROLPRODUCTSNEMA & GeneralPurpose ControlNEMA 1 General Purpose EnclosuresCombinationNon-combination Non-Fusible Combination CombinationOverload Enclosures Disconnect MotorFuseFusible DisconnectCircuitCircuit BreakerMotor Max NEMA Half Amp Catalog List Catalog List Clip Size Catalog List Interrupter Catalog ListVolts HP Size Size Range Number Price $ Number Price $ Amps/Volts Number Price $ ETI Amps Number Price $10 — 1 3 ⁄4 20–40 36ESGT6BD 4622.00 37ESGT6BDD 5656.00 60A/250V 37ESGT6BDF 5794.00 50 37ESGT6BDP 5991.0010 2 — 22–45 36FSHT6BD 4923.00 37FSHT6BDD 5957.00 60A/250V 37FSHT6BDF 6208.00 50 37FSHT6BDP 6405.0015 — 2 1 ⁄2 30–60 36GSJT6BD 5354.00 37GSJT6BDD 6663.00 100A/250V 37GSJT6BDF 7112.00 100 37GSJT6BDP 6966.0025 3 — 45–90 36HSKT6BD 5784.00 37HSKT6BDD 7094.00 100A/250V 37HSKT6BDF 7542.00 100 37HSKT6BDP 7417.00200 30 — 3 1 ⁄2 57–115 36ISLT6BD 10351.00 37ISLT6BDD 12160.00 200A/250V 37ISLT6BDF 12539.00 125 37ISLT6BDP 13297.0040 4 — 67–135 36JSMT6BD 11178.00 37JSMT6BDD 12987.00 200A/250V 37JSMT6BDF 14297.00 150 37JSMT6BDP 14125.0050 5 — 55–250 — — — — — — — 250 37LTST6BDP 24838.0075 5 — 55–250 36LTUT6BD 19108.00 37LTUT6BDD 22347.00 400A/250V 37LTUT6BDF 22658.00 400 37LTUT6BDP 24838.00150 6 — 160–540 36MTXT6BD 34218.00 37MTXT6BDD 41654.00 600A/250V 37MTXT6BDF 41846.00 600 37MTXT6BDP 42653.0010 — 1 3 ⁄4 20–40 36ESGT2BG 4622.00 37ESGT2BGD 5656.00 60A/250V 37ESGT2BGF 5794.00 50 37ESGT2BGP 5991.0015 2 — 22–45 36FSHT2BG 4923.00 37FSHT2BGD 5957.00 60A/250V 37FSHT2BGF 6208.00 50 37FSHT2BGP 6405.0020 — 2 1 ⁄2 30–60 36GSJT2BG 5354.00 37GSJT2BGD 6663.00 100A/250V 37GSJT2BGF 7112.00 100 37GSJT2BGP 6966.0030 3 — 45–90 36HSKT2BG 5784.00 37HSKT2BGD 7094.00 100A/250V 37HSKT2BGF 7542.00 100 37HSKT2BGP 7417.00230 40 — 3 1 ⁄2 57–115 36ISLT2BG 10351.00 37ISLT2BGD 12160.00 200A/250V 37ISLT2BGF 12539.00 125 37ISLT2BGP 13297.0050 4 — 67–135 36JSMT2BG 11178.00 37JSMT2BGD 12987.00 200A/250V 37JSMT2BGF 14297.00 150 37JSMT2BGP 14125.0075 5 — 55–250 — — — — — — — 250 37LTST2BGP 24838.00100 5 — 55–250 36LTUT2BG 19108.00 37LTUT2BGD 22347.00 400A/250V 37LTUT2BGF 22658.00 400 37LTUT2BGP 24838.00200 6 — 160–540 36MTXT2BG 35442.00 37MTXT2BGD 42877.00 600A/250V 37MTXT2BGF 43069.00 600 37MTXT2BGP 43875.0015 — 1 3 ⁄4 13–27 36ESFT4BH 4531.00 37ESFT4BHD 5656.00 30A/600V 37ESFT4BHF 5794.00 40 37ESFT4BHP 5991.0025 2 — 22–45 36FSHT4BH 4923.00 37FSHT4BHD 5957.00 60A/600V 37FSHT4BHF 6069.00 50 37FSHT4BHP 6405.0030 — 2 1 ⁄2 22–45 36GSHT4BH 5578.00 37GSHT4BHD 6887.00 60A/600V 37GSHT4BHF 6991.00 50 37GSHT4BHP 7189.0050 3 — 45–90 36HSKT4BH 6233.00 37HSKT4BHD 7542.00 100A/600V 37HSKT4BHF 7989.00 100 37HSKT4BHP 7844.00460 75 — 3 1 ⁄2 57–115 36ISLT4BH 10351.00 37ISLT4BHD 12160.00 200A/600V 37ISLT4BHF 12539.00 125 37ISLT4BHP 13297.00100 4 — 67–135 36JSMT4BH 11385.00 37JSMT4BHD 13194.00 200A/600V 37JSMT4BHF 14504.00 150 37JSMT4BHP 14331.00150 5 — 55–250 — — — — — — — 250 37LTST4BHP 26508.00200 5 — 55–250 36LTUT4BH 20780.00 37LTUT4BHD 24019.00 400A/600V 37LTUT4BHF 24328.00 400 37LTUT4BHP 26508.00400 6 — 160–540 36MTXT4BH 37544.00 37MTXT4BHD 44979.00 600A/600V 37MTXT4BHF 45172.00 600 37MTXT4BHP 45978.0015 — 1 3 ⁄4 13–27 36ESFT5BE 4531.00 37ESFT5BED 5656.00 30A/600V 37ESFT5BEF 5794.00 40 37ESFT5BEP 5991.0025 2 — 22–45 36FSHT5BE 4923.00 37FSHT5BED 5957.00 60A/600V 37FSHT5BEF 6069.00 50 37FSHT5BEP 6405.0030 — 2 1 ⁄2 22–45 36GSHT5BE 5578.00 37GSHT5BED 6887.00 60A/600V 37GSHT5BEF 6991.00 50 37GSHT5BEP 7189.0057550 3 — 45–90 36HSKT5BE 6233.00 37HSKT5BED 7542.00 100A/600V 37HSKT5BEF 7989.00 100 37HSKT5BEP 7844.0075 — 3 1 ⁄2 57–115 36ISLT5BE 10351.00 37ISLT5BED 12160.00 200A/600V 37ISLT5BEF 12539.00 125 37ISLT5BEP 13297.00100 4 — 67–135 36JSMT5BE 11385.00 37JSMT5BED 13194.00 200A/600V 37JSMT5BEF 14504.00 150 37JSMT5BEP 14331.00200 5 — 55–250 36LTUT5BE 20780.00 37LTUT5BED 24019.00 400A/600V 37LTUT5BEF 24328.00 250 37LTUT5BEP 26508.00400 6 — 160–540 36MTXT5BE 37544.00 37MTXT5BED 44979.00 600A/600V 37MTXT5BEF 45172.00 600 37MTXT5BEP 45978.00Note: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating.16-64Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Reduced Voltage Heavy Duty Starters2 Step Part Winding with Solid State Overload, Class 36 & 37 SelectionOrdering Information Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-125. Wiring Diagrams see page 16-136. Replacement Parts see page 16-155. For additional enclosure options see page 16-97.Coil and Control VoltageThe coil voltage will always match themotor voltage.As standard, a CPT is supplied and 120Vcontrol voltage is utilized.To change to 120V separate controlvoltage (CPT not supplied), changethe 9th character to “F”.To change to 24VAC separate controlvoltage (CPT not supplied), change the9th character to “J”.NEMA 1 General Purpose EnclosuresCombinationNon-combination Non-Fusible Combination CombinationOverload Enclosures Disconnect MotorFuseFusible DisconnectCircuit BreakerCircuitMotor Max NEMA Half Amp Catalog List Catalog List Clip Size Catalog List Interrupter Catalog ListVolts HP Size Size Range Number Price $ Number Price $ Amps/Volts Number Price $ ETI Amps Number Price $7 1 ⁄2 0 — 9–18 36CSEP6BD 1844.00 37CSEP6BDD 2877.00 60A/250V 37CSEP6BDF 2903.00 30 37CSEP6BDP 3325.0010 1 — 9–18 36DSEP6BD 1965.00 37DSEP6BDD 2998.00 60A/250V 37DSEP6BDF 3248.00 50 37DSEP6BDP 3446.0015 — 1 3 ⁄4 20–40 36ESGP6BD 2309.00 37ESGP6BDD 3342.00 100A/250V 37ESGP6BDF 3938.00 100 37ESGP6BDP 3790.0020 2 — 22–45 36FSHP6BD 2766.00 37FSHP6BDD 4075.00 100A/250V 37FSHP6BDF 4523.00 100 37FSHP6BDP 4376.0020030 — 2 1 ⁄2 30–60 36GSJP6BD 3317.00 37GSJP6BDD 5126.00 200A/250V 37GSJP6BDF 5505.00 125 37GSJP6BDP 6263.0040 3 — 45–90 36HSKP6BD 3868.00 37HSKP6BDD 5677.00 200A/250V 37HSKP6BDF 6056.00 150 37HSKP6BDP 6814.0050 — 3 1 ⁄2 57–115 36ISLP6BD 7495.00 37ISLP6BDD 10734.00 200A/250V 37ISLP6BDF 11036.00 250 37ISLP6BDP 13225.0075 4 — 67–135 36JSMP6BD 8185.00 37JSMP6BDD 11424.00 400A/250V 37JSMP6BDF 11734.00 400 37JSMP6BDP 13914.00100 5 — 55–250 — — — — — — — 600 37LTSP6BDP 25492.00150 5 — 55–250 36LTUP6BD 17058.00 37LTUP6BDD 24492.00 600A/250V 37LTUP6BDF 24686.00 600 37LTUP6BFP 25492.007 1 ⁄2 0 — 9–18 36CSEP2BG 1844.00 37CSEP2BGD 2877.00 60A/250V 37CSEP2BGF 2903.00 30 37CSEP2BGP 3325.0010 1 — 9–18 36DSEP2BG 1965.00 37DSEP2BGD 2998.00 60A/250V 37DSEP2BGF 3248.00 50 37DSEP2BGP 3446.0020 — 1 3 ⁄4 20–40 36ESGP2BG 2309.00 37ESGP2BGD 3342.00 100A/250V 37ESGP2BGF 3938.00 100 37ESGP2BGP 3790.0025 2 — 22–45 36FSHP2BG 2766.00 37FSHP2BGD 4075.00 100A/250V 37FSHP2BGF 4523.00 100 37FSHP2BGP 4376.0030 — 2 1 ⁄2 30–60 36GSJP2BG 3317.00 37GSJP2BGD 5126.00 200A/250V 37GSJP2BGF 5505.00 100 37GSJP2BGP 6263.00230 50 3 — 45–90 36HSKP2BG 3868.00 37HSKP2BGD 5677.00 200A/250V 37HSKP2BGF 6056.00 150 37HSKPP2BGP 6814.0060 — 3 1 ⁄2 57–115 36ISLP2BG 7495.00 37ISLP2BGD 10734.00 200A/250V 37ISLP2BGF 11036.00 250 37ISLP2BGP 13225.0075 4 — 67–135 36JSMP2BG 8185.00 37JSMP2BGD 11424.00 400A/250V 37JSMP2BGF 11734.00 250 37JSMP2BGP 13914.00125 5 — 55–250 — — — — — — — 400 37LTSP2BGP 25492.00150 5 — 55–250 36LTUP2BG 17058.00 37LTUP2BGD 24492.00 600A/250V 37LTUP2BGF 24686.00 600 37LTUP2BGP 25492.00300 6 — 160–540 36MTXP2BG 35580.00 37MTXP2BGD 43445.00 1200A/250V 37MTXP2BGF 44540.00 1200 37MTXP2BGP 47271.0010 0 — 2.5–10 36CSDP4BH 1844.00 37CSDP4BHD 2877.00 30A/600V 37CSDP4BHF 2903.00 30 37CSDP4BHP 3325.0015 1 — 9–18 36DSEP4BH 1965.00 37DSEP4BHD 2998.00 60A/600V 37DSEP4BHF 3024.00 30 37DSEP4BHP 3446.0030 — 1 3 ⁄4 13–27 36ESFP4BH 2309.00 37ESFP4BHD 3342.00 60A/600V 37ESFP4BHF 3721.00 50 37ESFP4BHP 3790.0040 2 — 22–45 36FSHP4BH 2766.00 37FSHP4BHD 4075.00 100A/600V 37FSHP4BHF 4178.00 100 37FSHP4BHP 4376.0060 — 2 1 ⁄2 30–60 36GSJP4BH 3317.00 37GSJP4BHD 5126.00 200A/600V 37GSJP4BHF 5505.00 100 37GSJP4BHP 6263.00460 75 3 — 30–60 36HSJP4BH 3868.00 37HSJP4BHD 5677.00 200A/600V 37HSJP4BHF 6056.00 125 37HSJP4BHP 6814.00100 — 3 1 ⁄2 57–115 36ISLP4BH 7495.00 37ISLP4BHD 10734.00 200A/600V 37ISLP4BHF 11036.00 150 37ISLP4BHP 13225.00150 4 — 67–135 36JSMP4BH 8185.00 37JSMP4BHD 11424.00 400A/600V 37JSMP4BHF 11734.00 250 37JSMP4BHP 13914.00250 5 — 55–250 — — — — — — — 400 37LTSP4BHP 25492.00350 5 — 55–250 36LTUP4BH 17058.00 37LTUP4BHD 24492.00 600A/600V 37LTUP4BHF 24686.00 600 37LTUP4BHP 25492.00600 6 — 160–540 36MTXP4BH 35580.00 37MTXP4BHD 43445.00 1200A/600V 37MTXP4BHF 44540.00 1200 37MTXP4BHP 47271.0010 0 — 2.5–10 36CSDP5BE 1844.00 37CSDP5BED 2877.00 30A/600V 37CSDP5BEF 2903.00 30 37CSDP5BEP 3325.0015 1 — 2.5–10 36DSDP5BE 1965.00 37DSDP5BED 2998.00 60A/600V 37DSDP5BEF 3024.00 30 37DSDP5BEP 3446.0030 — 1 3 ⁄4 13–27 36ESFP5BE 2309.00 37ESFP5BED 3342.00 60A/600V 37ESFP5BEF 3721.00 50 37ESFP5BEP 3790.0040 2 — 13–27 36FSFP5BE 2766.00 37FSFP5BED 4075.00 60A/600V 37FSFP5BEF 4178.00 50 37FSFP5BEP 4376.0060 — 2 1 ⁄2 22–45 36GSHP5BE 3317.00 37GSHP5BED 5126.00 100A/600V 37GSHP5BEF 5505.00 100 37GSHP5BEP 6263.00575 75 3 — 30–60 36HSJP5BE 3868.00 37HSJP5BED 5677.00 200A/600V 37HSJP5BEF 6056.00 125 37HSJP5BEP 6814.00100 — 3 1 ⁄2 57–115 36ISKP5BE 7495.00 37ISKP5BED 10734.00 400A/600V 37ISKP5BEF 11036.00 150 37ISKP5BEP 13225.00150 4 — 67–135 36JSMP5BE 8185.00 37JSMP5BED 11424.00 400A/600V 37JSMP5BEF 11734.00 250 37JSMP5BEP 13914.00250 5 — 55–250 — — — — 400A/600V 37LTSP5BEF 24686.00 — — —350 5 — 55–250 36LTUP5BE 17058.00 37LTUP5BED 24492.00 600A/600V 37LTUP5BEF 24686.00 400 37LTUP5BEP 25492.00600 6 — 160–540 36MTXP5BE 35580.00 37MTXP5BED 43445.00 1200A/600V 37MTXP5BEF 44540.00 1200 37MTXP5BEP 47271.0016 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating.Discount Schedule NEMA Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-65

Reduced Voltage Heavy Duty StartersWye Delta, Open Transition with Solid State Overload, Class 36 & 37SelectionOrdering Information Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-125. Wiring Diagrams see page 16-138. Replacement Parts see page 16-155. For additional enclosure options see page 16-97.Coil and Control VoltageThe coil voltage will always match themotor voltage.As standard, a CPT is supplied and 120Vcontrol voltage is utilized.To change to 120V separate controlvoltage (CPT not supplied), changethe 9th character to “F”.To change to 24VAC separate controlvoltage (CPT not supplied), change the9th character to “J”.16CONTROLPRODUCTSNEMA & GeneralPurpose ControlNEMA 1 General Purpose EnclosuresCombinationCombinationNon-combination Non-Fusible FusibleMotorCombinationOverloadEnclosuresDisconnectFuseDisconnectCircuitCircuit BreakerMotor Max NEMA Half Amp Catalog List Catalog List Clip Size Catalog List Interrupter Catalog ListVolts HP Size Size Range Number Price $ Number Price $ Amps/Volts Number Price $ ETI Amps Number Price $10 1 — 13–27 36DSF06BD 2998.00 37DSF06BDD 4031.00 60A/250V 37DSF06BDF 4100.00 50 37DSF06BDP 4479.0015 — 1 3 ⁄4 20–40 36ESG06BD 3266.00 37ESG06BDD 4600.00 100A/250V 37ESG06BDF 4669.00 100 37ESG06BDP 4782.0020 2 — 22–45 36FSH06BD 3541.00 37FSH06BDD 4850.00 100A/250V 37FSH06BDF 5298.00 100 37FSH06BDP 5151.0030 — 2 1 ⁄2 30–60 36GSJ06BD 4342.00 37GSJ06BDD 5221.00 200A/250V 37GSJ06BDF 6875.00 125 37GSJ06BDP 7289.0020040 3 — 45–90 36HSK06BD 5134.00 37HSK06BDD 6944.00 200A/250V 37HSK06BDF 7323.00 150 37HSK06BDP 8081.0050 — 3 1 ⁄2 57–115 36ISL06BD 9632.00 37ISL06BDD 11441.00 200A/250V 37ISL06BDF 13611.00 250 37ISL06BDP 15360.0060 4 — 67–135 36JSM06BD 10666.00 37JSM06BDD 13904.00 400A/250V 37JSM06BDF 14215.00 250 37JSM06BDP 16395.0075 5 — 55–250 36LTS06BD 19143.00 37LTS06BDD 25965.00 400A/250V 37LTS06BDF 27490.00 400 37LTS06BDP 27577.00150 5 — 55–250 36LTU06BD 19143.00 37LTU06BDD 25965.00 600A/250V 37LTU06BDF 27490.00 600 37LTU06BDP 27577.00300 6 — 160–540 36MTX06BD 40922.00 37MTX06BDD 48787.00 1200A/250V 37MTX06BDF 49880.00 1200 37MTX06BDP 52611.0010 1 — 13–27 36DSF02BG 2998.00 37DSF02BGD 4031.00 60A/250V 37DSF02BGF 4100.00 50 37DSF02BGP 4479.0015 — 1 3 ⁄4 20–40 36ESG02BG 3266.00 37ESG02BGD 4600.00 60A/250V 37ESG02BGF 4669.00 50 37ESG02BGP 4782.0025 2 — 22–45 36FSH02BG 3541.00 37FSH02BGD 4850.00 100A/250V 37FSH02BGF 5298.00 100 37FSH02BGP 5151.0030 — 2 1 ⁄2 30–60 36GSJ02BG 4342.00 37GSJ02BGD 5221.00 200A/250V 37GSJ02BGF 6875.00 100 37GSJ02BGP 7289.0023050 3 — 45–90 36HSK02BG 5134.00 37HSK02BGD 6944.00 200A/250V 37HSK02BGF 7323.00 150 37HSK02BGP 8081.0060 — 3 1 ⁄2 57–115 36ISL02BG 9632.00 37ISL02BGD 11441.00 200A/600V 37ISL02BGF 13611.00 250 37ISL02BGP 15360.0075 4 — 67–135 36JSM02BG 10666.00 37JSM02BGD 13904.00 400A/250V 37JSM02BGF 14215.00 250 37JSM02BGP 16395.00100 5 — 55–250 36LTS02BG 19143.00 37LTS02BGD 25965.00 400A/250V 37LTS02BGF 27490.00 400 37LTS02BGP 27577.00150 5 — 55–250 36LTU02BG 19143.00 37LTU02BGD 25965.00 600A/250V 37LTU02BGF 27490.00 600 37LTU02BGP 27577.00350 6 — 160–540 36MTX02BG 40922.00 37MTX02BGD 48787.00 1200A/250V 37MTX02BGF 49880.00 1200 37MTX02BGP 52611.0015 1 — 9–18 36DSE04BH 2998.00 37DSE04BHD 4031.00 30A/600V 37DSE04BHF 4100.00 30 37DSE04BHP 4479.0030 — 1 3 ⁄4 13–27 36ESF04BH 3266.00 37ESF04BHD 4600.00 60A/600V 37ESF04BHF 4669.00 50 37ESF04BHP 4782.0040 2 — 22–45 36FSH04BH 3541.00 37FSH04BHD 4850.00 100A/600V 37FSH04BHF 4954.00 100 37FSH04BHP 5151.0060 — 2 1 ⁄2 22–45 36GSJ04BH 4342.00 37GSJ04BHD 5221.00 200A/600V 37GSJ04BHF 6531.00 100 37GSJ04BHP 7289.0046075 3 — 45–90 36HSK04BH 5134.00 37HSK04BHD 6944.00 200A/600V 37HSK04BHF 7323.00 125 37HSK04BHP 8081.00100 — 3 1 ⁄2 57–115 36ISL04BH 9632.00 37ISL040BHD 11441.00 200A/600V 37ISL04BHF 11820.00 150 37ISL04BHP 15360.00150 4 — 67–135 36JSM04BH 10666.00 37JSM04BHD 13904.00 400A/600V 37JSM04BHF 14215.00 250 37JSM04BHP 16395.00200 5 — 55–250 36LTSS04BH 19143.00 37LTS04BHD 25965.00 400A/600V 37LTS04BHF 26770.00 400 37LTS04BHP 27577.00300 5 — 55–250 36LTU04BH 19143.00 37LTU04BHD 25965.00 600A/600V 37LTU04BHF 26770.00 600 37LTU04BHP 27577.00700 6 — 160–540 36MTX04BH 40922.00 37MTX04BHD 48787.00 1600A/600V 37MTX04BHF 49880.00 1200 37MTX04BHP 52611.0015 1 — 9–18 36DSE05BE 2998.00 37DSE05BED 4031.00 30A/600V 37DSE05BEF 4100.00 30 37DSE05BEP 4479.0030 — 1 3 ⁄4 13–27 36ESF05BE 3266.00 37ESF05BED 4600.00 60A/600V 37ESF05BEF 4669.00 50 37ESF05BEP 4782.0040 2 — 13–27 36FSF05BE 3541.00 37FSF05BED 4850.00 100A/600V 37FSF05BEF 4954.00 50 37FSF05BEP 5151.0060 — 2 1 ⁄2 22–45 36GSH05BE 4342.00 37GSH05BED 5221.00 100A/600V 37GSH05BEF 6531.00 100 37GSH05BEP 7289.0057575 3 — 30–60 36HSJ05BE 5134.00 37HSJ05BED 6944.00 200A/600V 37HSJ05BEF 7323.00 125 37HSJ05BEP 8081.00100 — 3 1 ⁄2 57–115 36ISK05BE 9632.00 37ISK05BED 11441.00 200A/600V 37ISK05BEF 11820.00 150 37ISK05BEP 15360.00150 4 — 67–135 36JSM05BE 10666.00 37JSM05BED 13904.00 400A/600V 37JSM05BEF 14215.00 250 37JSM05BEP 16395.00200 5 — 55–250 36LTS05BE 19143.00 37LTS05BED 21507.00 400A/600V 37LTS05BEF 26770.00 250 37LTS05BEP 27577.00300 5 — 55–250 36LTU05BE 19143.00 37LTU05BED 25965.00 600A/600V 37LTU05BEF 26770.00 400 37LTU05BEP 27577.00700 6 — 160–540 36MTX05BE 40922.00 37MTX05BED 48787.00 1600A/600V 37MTX05BEF 49880.00 1600 37MTX05BEP 52611.00Note: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating.16-66Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Reduced Voltage Heavy Duty StartersWye Delta, Closed Transition with Solid State Overload, Class 36 & 37SelectionOrdering Information Field Modification Kits see page 16-79. Factory Modifications see page 16-94. Dimensions see page 16-125. Wiring Diagrams see page 16-138. Replacement Parts see page 16-155. For additional enclosure options see page 16-97.Coil and Control VoltageThe coil voltage will always match themotor voltage.As standard, a CPT is supplied and 120Vcontrol voltage is utilized.To change to 120V separate controlvoltage (CPT not supplied), changethe 9th character to “F”.To change to 24VAC separate controlvoltage (CPT not supplied), change the9th character to “J”.NEMA 1 General Purpose EnclosuresCombinationNon-combination Non-Fusible CombinationMotorCombinationOverloadEnclosuresDisconnectFuseFusible DisconnectCircuitCircuit BreakerMotor Max NEMA Half Amp Catalog List Catalog List Clip Size Catalog List Interrupter Catalog ListVolts HP Size Size Range Number Price $ Number Price $ Amps/Volts Number Price $ ETI Amps Number Price $10 1 — 13–27 36DSFC6BD 4557.00 37DSFC6BDD 5591.00 60A/250V 37DSFC6BDF 5661.00 50 37DSFC6BDP 6040.0015 — 1 3 ⁄4 20–40 36ESGC6BD 4858.00 37ESGC6BDD 5894.00 100A/250V 37ESGC6BDF 5962.00 100 37ESGC6BDP 6384.0020 2 — 22–45 36FSHC6BD 5151.00 37FSHC6BDD 6462.00 100A/250V 37FSHC6BDF 6573.00 100 37FSHC6BDP 6763.0030 — 2 1 ⁄2 30–60 36GSJC6BD 6212.00 37GSJC6BDD 8020.00 200A/250V 37GSJC6BDF 8399.00 125 37GSJC6BDP 9157.0020040 3 — 45–90 36HSKC6BD 7099.00 37HSKC6BDD 8908.00 200A/250V 37HSKC6BDF 9287.00 150 37HSKC6BDP 10045.0050 — 3 1 ⁄2 57–115 36ISLC6BD 12501.00 37ISLC6BDD 15740.00 200A/250V 37ISLC6BDF 16050.00 250 37ISLC6BDP 18230.0060 4 — 67–135 36JSMC6BD 13948.00 37JSMC6BDD 17186.00 400A/250V 37JSMC6BDF 17497.00 250 37JSMC6BDP 19677.0075 5 — 55–250 36LTSC6BD 23450.00 37LTSC6BDD 30885.00 400A/250V 37LTSC6BDF 31797.00 400 37LTSC6BDP 31884.00150 5 — 55–250 36LTUC6BD 23450.00 37LTUC6BDD 30885.00 600A/250V 37LTUC6BDF 31797.00 600 37LTUC6BDP 31884.00300 6 — 160–540 36MTXC6BD 51467.00 37MTXC6BDD 59331.00 1200A/250V 37MTXC6BDF 60425.00 1200 37MTXC6BFP 63156.0010 1 — 13–27 36DSFC2BG 4557.00 37DSFC2BGD 5591.00 60A/250V 37DSFC2BGF 5661.00 50 37DSFC2BGP 6040.0015 — 1 3 ⁄4 20–40 36ESGC2BG 4858.00 37ESGC2BGD 5894.00 60A/250V 37ESGC2BGF 5962.00 50 37ESGC2BGP 6384.0025 2 — 22–45 36FSHC2BG 5151.00 37FSHC2BGD 6462.00 100A/250V 37FSHC2BGF 6573.00 100 37FSHC2BGP 6763.0030 — 2 1 ⁄2 30–60 36GSJC2BG 6212.00 37GSJC2BGD 8020.00 200A/250V 37GSJC2BGF 8399.00 100 37GSJC2BGP 9157.0023050 3 — 45–90 36HSKC2BG 7099.00 37HSKC2BGD 8908.00 200A/250V 37HSKC2BGF 9287.00 150 37HSKC2BGP 10045.0060 — 3 1 ⁄2 57–115 36ISLC2BG 12501.00 37ISLC2BGD 15740.00 200A/250V 37ISLC2BGF 16050.00 250 37ISLC2BGP 18230.0075 4 — 67–135 36JSMC2BG 13948.00 37JSMC2BGD 17186.00 400A/250V 37JSMC2BGF 17497.00 250 37JSMC2BGP 19677.00100 5 — 55–250 36LTSC2BG 23450.00 37LTSC2BGD 30885.00 400A/250V 37LTSC2BGF 31797.00 400 37LTSC2BGP 31884.00150 5 — 55–250 36LTUC2BG 23450.00 37LTUC2BGD 30885.00 600A/250V 37LTUC2BGF 31797.00 600 37LTUC2BGP 31884.00350 6 — 160–540 36MTXC2BG 51467.00 37MTXC2BGD 59331.00 1200A/250V 37MTXC2BGF 60425.00 1200 37MTXC2BGP 63156.0015 1 — 9–18 36DSEC4BH 4557.00 37DSEC4BHD 5591.00 30A/600V 37DSEC4BHF 5661.00 30 37DSEC4BHP 6040.0030 — 1 3 ⁄4 13–27 36ESFC4BH 4858.00 37ESFC4BHD 5894.00 60A/600V 37ESFC4BHF 5962.00 50 37ESFC4BHP 6384.0040 2 — 22–45 36FSHC4BH 5340.00 37FSHC4BHD 6651.00 100A/600V 37FSHC4BHF 6755.00 100 37FSHC4BHP 6952.0060 — 2 1 ⁄2 30–60 36GSJC4BH 6401.00 37GSJC4BHD 8210.00 200A/600V 37GSJC4BHF 8589.00 100 37GSJC4BHP 9347.0046075 3 — 45–90 36HSKC4BH 8451.00 37HSKC4BHD 9829.00 200A/600V 37HSKC4BHF 10208.00 125 37HSKC4BHP 10966.00100 — 3 1 ⁄2 57–115 36ISLC4BH 13465.00 37ISLC4BHD 16704.00 200A/600V 37ISLC4BHF 17014.00 150 37ISLC4BHP 19195.00150 4 — 67–135 36JSMC4BH 14706.00 37JSMC4BHD 17944.00 400A/600V 37JSMC4BHF 18255.00 250 37JSMC4BHP 20435.00200 5 — 55–250 36LTSC4BH 25320.00 37LTSC4BHD 32755.00 400A/600V 37LTSC4BHF 33667.00 400 37LTSC4BHP 33753.00300 5 — 55–250 36LTUC4BH 25320.00 37LTUC4BHD 32755.00 600A/600V 37LTUC4BHF 33667.00 600 37LTUC4BHP 33753.00700 6 — 160–540 36MTXC4BH 51467.00 37MTXC4BHD 59331.00 1600A/600V 37MTXC4BHF 60425.00 1200 37MTXC4BHP 63156.0015 1 — 9–18 36DSEC5BE 4557.00 37DSEC5BED 5591.00 30A/600V 37DSEC5BEF 5661.00 30 37DSEC5BEP 6040.0030 — 1 3 ⁄4 13–27 36ESFC5BE 4858.00 37ESFC5BED 5894.00 60A/600V 37ESFC5BEF 5962.00 50 37ESFC5BEP 6384.0040 2 — 13–27 36FSFC5BE 5340.00 37FSFC5BED 6651.00 100A/600V 37FSFC5BEF 6755.00 50 37FSFC5BEP 6952.0060 — 2 1 ⁄2 22–45 36GSHC5BE 6401.00 37GSHC5BED 8210.00 100A/600V 37GSHC5BEF 8589.00 100 37GSHC5BEP 9347.0057575 3 — 30–60 36HSJC5BE 8451.00 37HSJC5BED 9829.00 200A/600V 37HSJC5BEF 10208.00 125 37HSJC5BEP 10966.00100 — 3 1 ⁄2 57–115 36ISKC5BE 13465.00 37ISKC5BED 16704.00 200A/600V 37ISKC5BEF 17014.00 150 37ISKC5BEP 19195.00150 4 — 67–135 36JSMC5BE 14714.00 37JSMC5BED 17944.00 400A/600V 37JSMC5BEF 18255.00 250 37JSMC5BEP 20435.00200 5 — 55–250 36LTSC5BE 25320.00 37LTSC5BED 32755.00 400A/600V 37LTSC5BEF 33667.00 250 37LTSC5BEP 33753.00300 5 — 55–250 36LTUC5BE 25320.00 37LTUC5BED 32755.00 600A/600V 37LTUC5BEF 33667.00 400 37LTUC5BEP 33753.00700 6 — 160–540 36MTXC5BE 51467.00 37MTXC5BED 59331.00 1600A/600V 37MTXC5BEF 60425.00 1600 37MTXC5BEP 63156.0016 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Hp’s shown above are based on the overload amprange for the FLA’s (per the National Electric Code)of typical industrial motors. All starter sizes carryone maximum Hp rating.Discount Schedule NEMA Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-67

Lighting and Heating ControlElectrically Held Lighting ContactorsFeaturesApplication▪ Compact Design▪ Silver Cadmium Oxide Contacts▪ Pressure Type Terminals▪ Straight Thru Wiring▪ Wide Variety of Contact Configurations▪ 12-Poles Maximum▪ Available From 20 Amps–400 AmpsUp to 12-Poles 20, 30 and 60 Amps3-Poles On 100–400 Amps▪ Full Line of EnclosuresNEMA 1NEMA 3R/12NEMA 4/4X (Stainless Steel)▪ Available In Combination Form withChoice of:Fusible DisconnectNon-Fusible DisconnectCircuit Breaker▪ All Combination Lighting Contactorsare UL Service Entrance Listed▪ Full Line of Factory And FieldModifications▪ UL Listed Files #E14900▪ CSA Certified File LR 6535Siemens electrically held lightingcontactors provide a safe, convenientmeans of local or remote switchingfor tungsten and ballast lamp loads,mercury arc lamps, and 3-phaseresistive heating.Class LE electrically held lightingand heating contactors are used inapplications where it is not critical thatthe contacts remain in the closedposition during loss of control power.These lighting contactors are rated at480V Tungsten, 600V Ballast. They areavailable in 2–12 poles with a variety ofNO and NC contact arrangements.Typical applications include:▪ Industrial and Commercial Buildings▪ Stadiums▪ Airports▪ Non-Critical Resistive Heaters andother Non-Inductive LoadsGeneralNEMA & GeneralPurpose ControlCONTROLPRODUCTS1616-68Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Lighting and Heating ControlElectrically Held Lighting Contactors, Class LESelectionOrdering Information Replace the *** with a number from the coil table. Field modifications see page 16-79. Factory modification kits see page 16-94. Dimensions see page 16-110 open page 16-128 enclosed. Wiring Diagrams see page 16-144. Replacement parts see page 16-158.Coil Table60Hz VoltageNumber24 024120 120208 208240 240277 277480 480600 600Open and Non-combination Enclosed ContactorsOpen Type NEMA 1 NEMA 12 NEMA 4/4X Stainless Steel General Purpose NEMA 3/3R Watertight, Dust-tight,Industrial UseCorrosion Resistant,Max. Number Normally NormallyWeatherproof304 Stainless SteelAmp of Closed OpenRating Poles Contacts Contacts Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $22 0 LEN00B200***A 242.00 LEN01B200***A 268.00 LEN02B200***A 414.00 LEN04B200***A 554.000 2 LEN00B002***A 242.00 LEN01B002***A 268.00 LEN02B002***A 414.00 LEN04B002***A 554.0033 0 LEN00B300***A 268.00 LEN01B300***A 293.00 LEN02B300***A 440.00 LEN04B300***A 651.000 3 LEN00B003***A 268.00 LEN01B003***A 293.00 LEN02B003***A 440.00 LEN04B003***A 651.004 0 LEN00B400***A 344.00 LEN01B400***A 371.00 LEN02B400***A 517.00 LEN04B400***A 728.0042 2 LEN00B202***A 344.00 LEN01B202***A 371.00 LEN02B202***A 517.00 LEN04B202***A 728.001 3 LEN00B103***A 344.00 LEN01B103***A 371.00 LEN02B103***A 517.00 LEN04B103***A 728.000 4 LEN00B004***A 344.00 LEN01B004***A 371.00 LEN02B004***A 517.00 LEN04B004***A 728.0062 4 LEN00B204***A 448.00 LEN01B204***A 534.00 LEN02B204***A 621.00 LEN04B204***A 758.000 6 LEN00B006***A 448.00 LEN01B006***A 534.00 LEN02B006***A 621.00 LEN04B006***A 758.00204 4 LEN00B404***A 612.00 LEN01B404***A 698.00 LEN02B404***A 784.00 LEN04B404***A 925.008 2 6 LEN00B206***A 612.00 LEN01B206***A 698.00 LEN02B206***A 784.00 LEN04B206***A 925.000 8 LEN00B008***A 612.00 LEN01B008***A 698.00 LEN02B008***A 784.00 LEN04B008***A 925.004 5 LEN00B405***A 664.00 LEN01B405***A 750.00 LEN02B405***A 853.00 LEN04B405***A 976.009 2 7 LEN00B207***A 664.00 LEN01B207***A 750.00 LEN02B207***A 853.00 LEN04B207***A 976.000 9 LEN00B009***A 664.00 LEN01B009***A 750.00 LEN02B009***A 853.00 LEN04B009***A 976.004 6 LEN00B406***A 715.00 LEN01B406***A 801.00 LEN02B406***A 919.00 LEN04B406***A 1028.0010 2 8 LEN00B208***A 715.00 LEN01B208***A 801.00 LEN02B208***A 919.00 LEN04B208***A 1028.000 10 LEN00B010***A 715.00 LEN01B010***A 801.00 LEN02B010***A 919.00 LEN04B010***A 1028.004 8 LEN00B408***A 819.00 LEN01B408***A 905.00 LEN02B408***A 1022.00 LEN04B408***A 1147.0012 2 10 LEN00B210***A 819.00 LEN01B210***A 905.00 LEN02B210***A 1022.00 LEN04B210***A 1147.000 12 LEN00B012***A 819.00 LEN01B012***A 905.00 LEN02B012***A 1022.00 LEN04B012***A 1147.003 0 3 LEN00C003***A 293.00 LEN01C003***A 310.00 LEN02C003***A 462.00 LEN04C003***A 702.00 6 0 6 LEN00C006***A 603.00 LEN01C006***A 621.00 LEN02C006***A 793.00 LEN04C006***A 991.00309 0 9 LEN00C009***A 914.00 LEN01C009***A 930.00 LEN02C009***A 1120.00 LEN04C009***A 1400.0012 0 12 LEN00C012***A 1223.00 LEN01C012***A 1240.00 LEN02C012***A 1430.00 LEN04C012***A 1788.003 0 3 LEN00D003***A 534.00 LEN01D003***A 621.00 LEN02D003***A 861.00 LEN04D003***A 1293.00 6 0 6 LEN00D006***A 1154.00 LEN01D006***A 1240.00 LEN02D006***A 1644.00 LEN04D006***A 2140.00609 0 9 LEN00D009***A 1774.00 LEN01D009***A 1861.00 LEN02D009***A 2305.00 LEN04D009***A 2995.0012 0 12 LEN00D012***A 2395.00 LEN01D012***A 2481.00 LEN02D012***A 3004.00 LEN04D012***A 3904.00100 3 0 3 LEN00E003***A 861.00 LEN01E003***A 1033.00 LEN02E003***A 1309.00 LEN04E003***A 1981.00200 3 0 3 LEN00F003***A 2067.00 LEN01F003***A 2430.00 LEN02F003***A 3231.00 LEN04F003***A 4036.00300 3 0 3 LEN00G003***A 4506.00 LEN01G003***A 5168.00 LEN02G003***A 7431.00 LEN04G003***A 8133.00400 3 0 3 LEN00H003***A 12578.00 LEN01H003***A 14232.00 LEN02H003***A 17635.00 LEN04H003***A 19616.0016 CONTROLPRODUCTSNEMA & GeneralPurpose Control For conduit hubs and conversion instructions, see page16-87. Can be field assembled. Order mounting kit49MCMPMA and required number of contactors.Example, 3, three pole contactors and 1 mounting platefor a 9-pole open assembly.Discount Schedule NEMA Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-69

Lighting and Heating ControlCombination Electrically Held Lighting Contactors, Class LEOrdering Information Replace the *** with a number from the coil table. Field modification kits see page 16-79. Factory modifications see page 16-94. Dimensions see page 16-128. Wiring Diagrams see page 16-144. Replacement parts see page 16-155.Coil TableSelection60Hz VoltageNumber24 024120 120208 208240 240277 277480 480600 600Combination Lighting Contactors16CONTROLPRODUCTSNEMA 1 NEMA 12, NEMA 3/3R NEMA 4/4X Stainless Steel General Purpose NEMA 4 Painted (thru 100 amps) Watertight, Dust-tight,Industrial UseCorrosion ResistantMax. Number Disc Disc Amp/ CircuitWeatherproof, Watertight, Dust-tight 304 Stainless SteelDisconnect Amp of NO Amp Fuse Clip BreakerType Rating Poles Rating Rating Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $20 3 30A — — LEDB1B003***A 768.00 LEDB2B003***A 855.00 LEDB4B003***A 1512.0030 3 30A — — LEDB1C003***A 784.00 LEDB2C003***A 991.00 LEDB4C003***A 1612.00Non-Fusible60 3 60A — — LEDD1D003***A 1233.00 LEDD2D003***A 1526.00 LEDD4D003***A 2507.00100 3 100A — — LEDF1E003***A 2051.00 LEDF2E003***A 2430.00 LEDF4E003***A 4272.00200 3 200A — — LEDH1F003***A 4006.00 LEDH2F003***A 5057.00 LEDH4F003***A 6849.00300 3 400A — — LEDK1G003***A 8408.00 LEDK2G003***A 10958.00 LEDK4G003***A 15662.00203 — 30A/250V — LEFA1B003***A 793.00 LEFA2B003***A 880.00 LEFA4B003***A 1512.003 — 30A/600V — LEFB1B003***A 810.00 LEFB2B003***A 898.00 LEFB4B003***A 1529.00303 — 30A/250V — LEFA1C003***A 810.00 LEFA2C003***A 1016.00 LEFA4C003***A 1637.003 — 30A/600V — LEFB1C003***A 827.00 LEFB2C003***A 1033.00 LEFB4C003***A 1654.00Fusible603 — 60A/250V — LEFC1D003***A 1266.00 LEFC2D003***A 1559.00 LEFC4D003***A 2542.003 — 60A/600V — LEFD1D003***A 1293.00 LEFD2D003***A 1586.00 LEFD4D003***A 2567.001003 — 100A/250V — LEFE1E003***A 2137.00 LEFE2E003***A 2516.00 LEFE4E003***A 4359.003 — 100A/600V — LEFF1E003***A 2180.00 LEFF2E003***A 2559.00 LEFF4E003***A 4403.002003 — 200A/250V — LEFG1F003***A 4152.00 LEFG2F003***A 5203.00 LEFG4F003***A 6996.003 — 200A/600V — LEFH1F003***A 4186.00 LEFH2F003***A 5237.00 LEFH4F003***A 7030.003003 — 400A/250V — LEFJ1G003***A 8650.00 LEFJ2G003***A 11199.00 LEFJ4G003***A 15903.003 — 400A/600V — LEFK1G003***A 8718.00 LEFK2G003***A 11269.00 LEFK4G003***A 15972.0020 3 — — 20A LEBT1B003***A 1077.00 LEBT2B003***A 1164.00 LEBT4B003***A 1796.00Circuit 30 3 — — 30A LEBV1C003***A 1094.00 LEBV2C003***A 1301.00 LEBV4C003***A 1922.00Breaker 60 3 — — 60A LEBY1D003***A 1533.00 LEBY2D003***A 1826.00 LEBY4D003***A 2809.00100 3 — — 100A LEBZ1E003***A 2214.00 LEBY2D003***A 1826.00 LEBZ4E003***A 4437.00NEMA & GeneralPurpose Control For conduit hubs and conversion instructions, see page16-87.16-70Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Lighting and Heating ContractorsMechanically and Magnetically Held Lighting ContactorsCLM 20 AmpCLM 100 AmpMechanically Latched Lightingand Heating ContactorThe CLM Lighting Contactors can beused with metal halide, mercury vapor,quartz halogen, tungsten and fluorescentlighting. They provide reliable andconvenient lighting control in numerousapplications, such as industrial plants,schools, hospitals, office buildings,shopping centers, airports, stadiums . . .literally everywhere lighting is required.The CLMs are listed under UL 508 withno derating when used open orenclosed. Combination lightingcontactors are listed for UL serviceentrance.UL listed File #E60310CSA Certified File LR 6535Type CLM 20 Amp LightingContactor Solid State ControlModulesThe CLM 20 amp lighting contactoris an electromagnetically operated,mechanically latched three wire controlcontactor. The most commonly usedmethod of control is a three positionmomentary contact switch with acenter-off position. The controllingdevice must be able to make the coilinrush current but need not break it.The coil current is interrupted by thecontrol contacts within the CLMcontactor. Power for the control line maycome from a separate source or directlyfrom the line side of the CLM contactor.The CLM contactor can also becontrolled by devices such as:▪ Break-glass control stations▪ Timers having single pole, doublethrow contacts▪ Photo-electric cells ▪ Energy management systems ▪ Microprocessors ▪ Occupancy sensors Control modules make it possible touse a controlling device that does nothave enough current-carrying capacityto control the CLM contactor directly.Control modules are also used whenthe control station is to be located ata distance greater than the allowablecontactor line run.Another use for control modules occurswhen the controlling device is onlyavailable as a single pole single-throwcontact necessitating a two wirecontrol line.Still another application for controlmodules is when start-stop threewire control is needed.Control modules also can make itpossible to operate the CLM coil fromits own incoming line at one voltagewhile providing the control at asecond, perhaps lower voltage.Two Wire Control Module(Accessory 47)The advantages of two wire controls are:1. Control station can have lowerampacity rating.2. Control station can be located anextended distance from the CLMcontactor.3. Control module can frequently becontrolled directly frommicroprocessor.4. Control devices can be two wiresingle pole, single-throw types.5. Control voltage may be different thanthe CLM coil circuit and at a lowervoltage level.Note: If the control power to the solidstate control module is lost while themodule is energized the lightingcontactor will open. If the line powerto the lighting contactor is lost while thecontactor is energized the contactor willnot change state with return of linevoltage. Power will be restored tothe load if the control module is stillenergized. Control station shouldbe the maintained type.Three Wire Control Module(Accessory 48)1. The accessory 48 consists of tworelays with contacts appropriatelyinterconnected which provides for aninterlocking that prevents both relaysfrom being energized simultaneously.2. This module has similar characteristicsto the two wire module (Accessory 47)except there is no change of switchcontact position upon loss of control linepower. Control stations should be themomentary type.SelectionStop-Start Control Module(Accessory 49)Stop-start three wire maintained controlis an arrangement used mostly whencontrolling motors, but can be used inlighting applications.Any number of momentary contactcontrol stations consisting of normallyopen start buttons and normally closedstop buttons can be used. Start buttonsare connected in parallel and stopbuttons in series.Operation (Magnetic Latch)A permanent magnet is built into thecontactor structure of the 30A, 60A,100A, and 200A contactors that willmaintain the contactor in its energizedstate indefinitely without using controlpower. When energized, a DC current isapplied that produces a magnetic fieldthat reinforces the polarity of thepermanent magnet, and the contactorpulls in immediately. The current to thecoil is disconnected by the coil clearinginterlock. In order to drop out thecontactor, it is necessary to apply a fieldthrough the OFF coil in the reversedirection to the permanent magnet.This momentarily cancels the magneticattraction and the contactor drops out.Coil and module failures are possiblewhen used with solid state relays andPLC outputs. 24-volt systems are ok touse, but 120 volts and above should bediscouraged. If higher values cannotbe avoided, an interposing relay shouldbe used.(Mechanically Latched)The 300 & 400A lighting and heatingcontactors operate using a latchingmechanism.Closing – When the “close” pushbuttonis operated, the closing coil is energized,closing the contactor. As the contactorcloses, the latch lever hooks over thelatch pin to mechanically latch thecontactor closed. The coil-clearingauxiliary contact de-energizes theclosing coil.Opening – When the “Trip” pushbuttonis operated, the trip solenoid coil isenergized, unhooking the latch leverfrom the latch pin, which allows thecontactor to open. As the contactoropens, the coil-clearing auxiliary contactde-energizes the trip solenoid coil.16 CONTROLPRODUCTSNEMA & GeneralPurpose Control Operation through control modules.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-71

Lighting ControlMechanically and Magnetically Held Lighting contactors, Class CLMSelectionOrdering InformationReplace *** with a number from the coil table. Field modification kits see page 16-79. Factory modifications see page 16-94.Dimensions see page 16-111 open page 16-128 enclosed. Wiring Diagrams see page 16-145. Replacement parts see page 16-158.Coil Table60Hz VoltageNumber24 024120 120208 208240 240277 277480 480600 60016CONTROLPRODUCTSNEMA & GeneralPurpose ControlOpen and Non-combination Enclosed ContactorsOpen Type EnclosureNEMA 1 NEMA 12 NEMA 4/4X Stainless Steel General Purpose NEMA 3/3R Watertight, Dust-tight,Industrial UseCorrosion Resistant,MaxWeatherproof304 Stainless SteelAmp NumberRating of Poles Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $2 CLM1B02*** 438.00 CLM2B02*** 543.00 CLMSB02*** 1046.003 CLM1B03*** 460.00 CLM2B03*** 567.00 CLMSB03*** 1067.004 CLM1B04*** 491.00 CLM2B04*** 592.00 CLMSB04*** 1080.0020 6 see table see table CLM1B06*** 610.00 CLM2B06*** 711.00 CLMSB06*** 1321.008 below below CLM1B08*** 896.00 CLM2B08*** 1102.00 CLMSB08*** 1533.0010 CLM1B10*** 986.00 CLM2B10*** 1193.00 CLMSB10*** 1623.0012 CLM1B12*** 1121.00 CLM2B12*** 1328.00 CLMSB12*** 1759.002 CLM0C02*** 429.00 CLM1C02*** 446.00 CLM2C02*** 550.00 CLMSC02*** 757.003 CLM0C03*** 455.00 CLM1C03*** 471.00 CLM2C03*** 575.00 CLMSC03*** 783.004 CLM0C04*** 481.00 CLM1C03*** 471.00 CLM2C04*** 602.00 CLMSC04*** 808.005 CLM0C05*** 602.00 CLM1C05*** 618.00 CLM2C05*** 722.00 CLMSC05*** 929.0030 6 CLM0C06*** 1192.00 CLM1C06*** 1561.00 CLM2C06*** 1584.00 — —8 CLM0C08*** 1296.00 CLM1C08*** 1666.00 CLM2C08*** 1688.00 — —9 CLM0C09*** 1768.00 CLM1C09*** 2132.00 CLM2C09*** 2152.00 — —10 CLM0C10*** 1411.00 CLM1C10*** 1782.00 CLM2C10*** 1804.00 — —12 CLM0C12*** 1926.00 CLM1C12*** 1782.00 CLM2C12*** 2310.00 — —2 CLM0D02*** 830.00 CLM1D02*** 899.00 CLM2D02*** 1088.00 CLMSD02*** 1518.003 CLM0D03*** 864.00 CLM1D03*** 933.00 CLM2D03*** 1122.00 CLMSD03*** 1553.004 CLM0D04*** 1036.00 CLM1D04*** 1106.00 CLM2D04*** 1295.00 CLMSD04*** 1967.005 CLM0D05*** 1381.00 CLM1D05*** 1450.00 CLM2D05*** 1639.00 CLMSD05*** 2311.0060 6 CLM0D06*** 2016.00 CLM1D06*** 2523.00 CLM2D06*** 2521.00 — —8 CLM0D08*** 2517.00 CLM1D08*** 3024.00 CLM2D08*** 3022.00 — —9 CLM0D09*** 3006.00 CLM1D09*** 3505.00 CLM2D09*** 3503.00 — —10 CLM0D10*** 2726.00 CLM1D10*** 3232.00 CLM2D10*** 3231.00 — —12 CLM0D12*** 3757.00 CLM1D12*** 4256.00 CLM2D12*** 4254.00 — —2 CLM0E02*** 1106.00 CLM1E02*** 1260.00 CLM2E02*** 1485.00 CLMSE02*** 2139.001003 CLM0E03*** 1174.00 CLM1E03*** 1329.00 CLM2E03*** 1553.00 CLMSE03*** 2208.004 CLM0E04*** 1432.00 CLM1E04*** 1588.00 CLM2E04*** 1811.00 CLMSE04*** 2708.005 CLM0E05*** 1983.00 CLM1E05*** 2139.00 CLM2E05*** 2362.00 CLMSE05*** 3259.002 CLM0F02*** 2725.00 CLM1F02*** 3225.00 CLM2F02*** 3965.00 CLMSF02*** 4724.002003 CLM0F03*** 2948.00 CLM1F03*** 3639.00 CLM2F03*** 4380.00 CLMSF03*** 5138.004 CLM0F04*** 3760.00 CLM1F04*** 4449.00 CLM2F04*** 5447.00 CLMSF04*** 6568.005 CLM0F05*** 4858.00 CLM1F05*** 5547.00 CLM2F05*** 6548.00 CLMSF05*** 7893.003002 CLM0G02*** 4570.00 CLM1G02*** 5637.00 CLM2G02*** 7533.00 — —3 CLM0G03*** 4724.00 CLM1G03*** 6189.00 CLM2G03*** 8084.00 — —4002 CLM0H02*** 10936.00 CLM1H02*** 13666.00 CLM2H02*** 15993.00 — —3 CLM0H03*** 12580.00 CLM1H03*** 15312.00 CLM2H03*** 17638.00 — —Open 20 Amp ContactorsMax110–120V Coil 50/60Hz 208–240V Coil 50/60Hz 265–277V Coil 50/60Hz 440–480V Coil 50/60HzAmp NumberRating of Poles Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $2 CLM22031 424.00 CLM22061 424.00 CLM22071 424.00 CLM22091 424.003 CLM32031 449.00 CLM32061 449.00 CLM32071 449.00 CLM32091 449.004 CLM42031 469.00 CLM42061 469.00 CLM42071 469.00 CLM42091 469.0020 6 CLM62031 728.00 CLM62061 728.00 CLM62071 728.00 CLM62091 728.008 CLM82031 810.00 CLM82061 810.00 CLM82071 810.00 CLM82091 810.0010 CLM102031 900.00 CLM102061 900.00 CLM102071 900.00 CLM102091 900.0012 CLM122031 1035.00 CLM122061 1035.00 CLM122071 1035.00 CLM122091 1035.00 Contactors with 2–6-poles will be assembled with allpoles located in the top portion of the contactor.Contactors with 8–12-poles will be assembled with 6-poles in the top portion and the remaining poles inthe bottom portion of the contactor.16-72 24 volt coils are not available on 20, 300 and 400 ampcontactor sizes. For 24 volt control of 20 amp contactorselect solid state control module. For conduit hubs and conversion instructions, seepage 16-87.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog CLM 30 & 60A 6-12-pole can be field assembled.Order mounting kit 49MCMPMA and the appropriatenumber of 2-5 pole contactors. 600 volt coils are not available on 20 ampcontactors.Discount Schedule NEMA

Lighting ControlCombination Mechanically and Magnetically Held Lighting contactors, Class CLM SelectionOrdering InformationReplace *** with a number from the coil table. Field modification kits see page 16-79. Factory modifications see page 16-94. Dimensions see page 16-128. Wiring Diagrams see page 16-145. Replacement parts see page 16-158.Coil Table60Hz VoltageNumber24 024120 120208 208240 240277 277480 480600 600Combination Lighting ContactorsEnclosureNEMA 1 NEMA 12, NEMA 3/3R NEMA 4/4X Stainless SteelGeneral Purpose NEMA 4 Painted (thru 100 amps) Watertight, Dust-tight,Industrial UseCorrosion Resistant,Contactor Number Disc Disc Amp/ Circuit Weatherproof, Watertight, Dust-tight 304 Stainless SteelDisconnect Amp of NO Amp Fuse Clip BreakerType Rating Poles Rating Rating Rating Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $20 3 30A — — CMNB14*** 768.00 CMNB24*** 855.00 CMNBS4*** 1486.0030 3 30A — — CMNC14*** 784.00 CMNC24*** 991.00 CMNCS4*** 1612.00Non-Fusible60 3 60A — — CMND15*** 1233.00 CMND25*** 1526.00 CMNDS5*** 2507.00100 3 100A — — CMNE16*** 2051.00 CMNE26*** 2430.00 CMNES6*** 4272.00200 3 200A — — CMNF17*** 3990.00 CMNF27*** 5057.00 CMNFS7*** 6849.00300 3 400A — — CMNG18*** 8408.00 CMNG28*** 10958.00 CMNGS8*** 15662.00203 — 30A/250V — CMFB10*** 793.00 CMFB20*** 880.00 CMFBS0*** 1512.003 — 30A/600V — CMFB11*** 810.00 CMFB21*** 898.00 CMFBS1*** 1529.00303 — 30A/250V — CMFC10*** 810.00 CMFC20*** 1016.00 CMFCS0*** 1637.003 — 30A/600V — CMFC11*** 827.00 CMFC21*** 1033.00 CMFCS1*** 1654.00Fusible603 — 60A/250V — CMFD12*** 1266.00 CMFD22*** 1559.00 CMFDS2*** 2542.003 — 60A/600V — CMFD13*** 1293.00 CMFD23*** 1586.00 CMFDS3*** 2567.001003 — 100A/250V — CMFE14*** 2137.00 CMFE24*** 2516.00 CMFES4*** 4359.003 — 100A/600V — CMFE15*** 2180.00 CMFE25*** 2559.00 CMFES5*** 4403.002003 — 200A/250V — CMFF16*** 4152.00 CMFF26*** 5203.00 CMFFS6*** 6996.003 — 200A/600V — CMFF17*** 4186.00 CMFF27*** 5237.00 CMFFS7*** 7030.003003 — 400A/250V — CMFG18*** 8650.00 CMFG28*** 11199.00 CMFGS8*** 15903.003 — 400A/600V — CMFG19*** 8718.00 CMFG29*** 11269.00 CMFGS9*** 15972.0020 3 — — 20A CMBB14*** 1077.00 CMBB24*** 1164.00 CMBBS4*** 1796.00Circuit 30 3 — — 30A CMBC15*** 1094.00 CMBC25*** 1301.00 CMBCS5*** 1922.00Breaker 60 3 — — 60A CMBD18*** 1533.00 CMBD28*** 1826.00 CMBDS8*** 2809.00100 3 — — 100A CMBE18*** 1533.00 CMBE28*** 2594.00 CMBES8*** 4437.00200 3 — — 200A CMBF10*** 4944.00 CMBF20*** 5997.00 CMBFS0*** 7788.00300 3 — — 300A CMBG11*** 10898.00 CMBG21*** 12793.00 CMBGS1*** 18151.00Lighting & Heating Contactor Ratings CLMMaximum AC/DC Voltage andAmp RatingsPoles to LoadLoad Amperes 2 for 1-PhaseType Continuous 1 for 1-Phase 3 for 3-PhaseTungsten 20 250V AC 250V ACBallast 20 347V AC 600V ACGeneral 30 347V AC 600V ACGeneral 20 125V DC 250V DCInrush Current Over Fuse Size (amps RMS)at AC Control Voltage 20A CLMAmps 120V 240V 277V 347V 480VInrush 5.0 2.5 2.2 1.8 1.3Fuse 2.0 1.0 1.0 0.75 0.5Contactor RatingsLoad Amperes Max Volts Max VoltsType Continuous Line to Line Line to NeutralTungsten 30-400 480 277Ballast 30-400 600 346Heating 30-400 600 346AC Coil DataContactorAmperes No. Poles Inrush VA Dropout VA20 2-12 625 630 2-5 410 4060 2-3 410 4060 4-5 600 40100/200 2-3 900 200100/200 4-5 1300 130300/400 2-3 1600 55016 CONTROLPRODUCTSNEMA & GeneralPurpose Control 24 volt coils are not available on 20 and 300 ampcontactors. Use solid state control module on 20 ampsize. For conduit hubs and conversion instructions, seepage 16-87. 600 volt coils are not available on 20 ampcontactors.Discount Schedule NEMA Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-73

16CONTROLPRODUCTSNEMA & GeneralPurpose ControlIndustrial Control Power TransformersClass MTFeatures▪ Epoxy-encapsulated (50–5000VA);Completely seals the transformer coilsagainst moisture, dust, dirt andindustrial contaminants for maximumprotection in hostile and industrialenvironments▪ Fuse clips (most models). Factorymounted for integral fusing on thesecondary side to save panel space,save wiring time and save the costof buying an add-on fuse block or kit▪ Integrally molded barriers. Betweenterminals and transformer, protectagainst electrical creepage. Up to 30%greater terminal contact area permitslow-loss connections. Extra-deep barriersreduce the chance of shorts fromfrayed leads or careless wiring▪ Terminals. Molded into thetransformer, are difficult to break duringwiring. A full quarter-inch ofthread on the 10-32 terminal screwsprevents stripping and pullout▪ Jumpers supplied. Two jumper linksare standard with all transformerswhich can be wired for dual primaryvoltagesOperationIndustrial control circuits and motorcontrol loads typically require morecurrent when they are initially energizedthan under normal operating conditions.This period of high current demand,referred to as inrush, may be as greatas ten times the current required understeady state (normal) operatingconditions, and can last up to 40milliseconds. A transformer in a circuitsubject to inrush will typically attemptto provide the load with the requiredcurrent during the inrush period.However, it will be atthe expense of the secondary voltagestability by allowing the voltage tothe load to decrease as the currentincreases. This period of secondaryvoltage instability, resulting fromincreased current, can be of suchmagnitude that the transformer isunable to supply sufficient voltage toenergize the load. The transformermust therefore be designed andconstructed to accommodate the highinrush current, while maintainingsecondary voltage stability. Accordingto NEMA standards, the secondaryvoltage would typically beat 85% of the rated voltage.Industrial Control Power Transformersare specifically designed and built toprovide adequate voltage to the loadwhile accommodating the high currentlevels present at inrush. Thesetransformers deliver excellentsecondary voltage regulation and meetor exceed the standards establishedby NEMA, ANSI, UL and CSA. Theirrugged construction and excellentelectrical characteristics ensure reliableoperation of electromagnetic devicesand trouble-free performance.Specifications▪ Laminations are built with siliconsteel to minimize core losses andto increase optimum performanceand efficiency▪ Copper magnet wire of the highestquality assures efficient operation▪ Factory mounted type “K” fuseclips are standard on all secondarytransformers where possible▪ Two jumper links are standard withall transformers which can be wiredfor dual primary voltages▪ UL listed and CSA certified▪ 50/60 Hz rated▪ Insulation materials are of thehighest rating available for thetemperature classGeneral▪ Mounting brackets are heavygauge steel to add strength to coreconstruction and provide stablemounting. Slotted mounting feetpermit easy installation▪ Attractive black finish; easy-to-readnameplate with complete rating dataand wiring diagram▪ Class 105°C (221°F) insulationsystem. 55°C (131°F) temperaturerise. (50–750VA typical)▪ Class 180°C (356°F) insulationsystem. 120°C (248°F) temperaturerise. (1000–5000VA typical)▪ Optional field mounted 2-poleprimary Class CC fuse block isavailable16-74Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Industrial Control Power TransformersClass MTGFeatures▪ Class MTG Industrial Control Transformers are 100%certified for all domestic and International Applications▪ The MTG line has full compliance with IEC Safetystandards EN 61 558▪ CE Mark in accordance with requirements for EN 61 558▪ Meets IP-20 specifications per IEC 529 for finger-safeprotection when used with Siemens Touch Safe snapon terminal cover kits. Meets IP-00 specifications whencovers are not used.▪ UL Listed (File # E46323)▪ CSA Certified (File #LR27533)▪ Exceeds applicable requirements for control transformers asdetermined by NEMA and ANSI▪ Insulation requirements is twice that of UL506▪ Proven Epoxy-encapsulated coils operate cooler andcompletely seal the transformer coils against moisture,dust, dirt and industrial contaminants for maximumprotection in hostile and industrial environments▪ Available in 50 to 750 VA sizes, in all standard voltagecombinations▪ Class 105°C (221°F) insulation system. 55°C (131°F)temperature rise. (50–750VA typical)▪ Class 180°C (356°F) insulation system. 120°C (248°F)temperature rise. (1000–5000VA typical)▪ Primary and secondary fusing capability available as fieldinstalled kits for domestic or international fusing▪ Integrally-molded terminals and barriers between terminalsmake breakage virtually impossible during wiring. The MTGtransformer construction is the same as our high qualityClass MT transformersOptional Field Installed Fuse Clip Kits For Panel Mounting▪ 2-Pole primary Class CC fuse block▪ 1-Pole secondary midget fuse block for 13 ⁄32 1 1 ⁄2 fuses▪ 2-Pole primary international type fuse blocks▪ 1-Pole secondary international type fuse blocksOptional Touch-Safe Snap-On Terminal Cover KitsThe Touch-Safe terminal covers are designed to complywith IEC 742 and IP 20 requirements. When installed,Generalthe covers prevent contact with current carrying parts onthe transformer and are available for 4 terminal configurations.The international fuse block kits have inherent touchsafe terminals and fuse clips.Siemens Meets International StandardsCSA (Canadian Standards Association) was utilized as aCompetent Body in reviewing, interpreting and properlycomplying with the requirements of IEC-742 to place a CEmark on its MTG Series product. As a National CertificationBody, CSA also has the proper documentation and reportson file for MTG Series to utilize the CB Scheme ensuringacceptance throughout the world.The standard Siemens MTG product is available with terminalcovers which meets the requirements of IEC-529, IP20degree of protection and meets the applicable requirementsfor covers per IEC-742.IEC-742The requirements for industrial control circuit transformersto be used in the European Common Market are identifiedby the International Electrotechnical Commission (IEC) andspecified under IEC-742, Non-Short Circuit Proof IsolatingTransformers, under the Low Voltage Directive 73/23/EEC.Manufacturers of control transformers indicate compliancewith these requirements by placing a CE mark on theproduct.▪ Winding to winding insulation requirements may be twicethat for IEC-742 compared to UL506▪ The electrical clearances between current carrying partsare one-third greater to comply with IEC-742 requirementsfor units up to 250VA with voltages up to 440 volts ac▪ Transformers manufactured to IEC-742 requirementswill have a minimum of 10% higher overload capacitythan those manufactured only to UL506 requirementsWhile no requirement exists in IEC-742 for the electricalconnections to be either finger safe or touch proof, thespecification does state that IF a transformer is suppliedwith a cover to prevent incidental contact with currentcarrying parts, that cover must utilize two separate methodsor places of securing it to the component, with neither beingdependent upon the other. Additionally, one of these methodsMUST require a tool to remove it.IEC-529The requirements for finger-safe or touch-proof electricalconnections are identified by the International ElectrotechnicalCommission (IEC) under specification 529, Classification ofDegrees of Protection Provided by Enclosures. These variousdegrees of protection are identified and differentiated by IPratings.The IP specification which most closely approximatesprotection to a human finger is IP20. This IP rating wouldbe the most common degree of touch-proof connectionfor electrical components such as transformers.EN 61 558The requirements for industrial control transformers to beused in the European Common Market are identifiedby the IEC and specified in EN 61 558, Safety of PowerControl Transformers, under Low Voltage Directive 73/23/EEC.CE mark on the product indicates compliance.16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-75

16CONTROLPRODUCTSNEMA & GeneralPurpose ControlIndustrial Control Power TransformersClass MT, MTGTransformer Selection ProcessSelecting a transformer for industrialcontrol circuit applications requiresknowledge of the following terms:Inrush VA is the product of load voltage(V) multiplied by the current (A) thatis required during circuit start-up. Itis calculated by adding the inrush VArequirements of all devices (contactors,timers, relays, pilot lights, solenoids,etc.), which will be energized together.Inrush VA requirements are bestobtained from the componentmanufacturer.Sealed VA is the product of loadvoltage (V) multiplied by the current (A)that is required to operate the circuitafter initial start-up or under normaloperating conditions. It is calculated byadding the sealed VA requirements ofall electrical components of the circuitthat will be energized at any giventime. Sealed VA requirements arebest obtained from the componentmanufacturer. Sealed VA is also referredto as steady state VA.Primary Voltage is the voltage availablefrom the electrical distribution systemand its operational frequency,which is connected to the transformersupply voltage terminals.Secondary Voltage is the voltagerequired for load operation which isconnected to the transformer loadvoltage terminals.Fuse Clip Kit KCCFPX2RPrimary Fuse KitIn addition to factory installed secondaryfusing, Siemens offers a primaryfuse kit for class MT transformers size50–750 VA for field installation. Theprimary fuse kit includes a 2-pole ClassCC fuse block, instructions and allassociated mounting and wiringhardware. Additionally, this fuse kitwill fit most competitors’ units. Toorder this kit, use catalog numberKCCFPX2R. The primary fuse kit,when installed, will add a maximum of0.69 in. (18 mm) to the transformer “A”dimension and 1.94 in. (49 mm) to the“C” dimension.GeneralOnce the circuit variables have been determined, transformer selection is a simple5-step process as follows:1. Determine the Application Inrush VA by using the following industry accepted formula:——————————–Application Inrush VA = √(Inrush VA) 2 (Sealed VA) 22. Refer to the Regulation Data Chart. If the primary voltage is basically stable anddoes not vary by more than 5% from nominal, the 90% secondary voltage columnshould be used. If the primary voltage varies between 5% and 10% of nominal,the 95% secondary voltage column should be used.3. After determining the proper secondary voltage column, read down until a valueequal to or greater than the Application Inrush VA is found. In no case should afigure less than the Application Inrush VA be used.4. Read left to the Transformer VA Rating column to determine the propertransformer for this application. As a final check, make sure that the TransformerVA Rating is equal to or greater than the total sealed requirements. If not, selecta transformer with a VA rating equal to or greater than the total sealed VA.5. Refer to the following pages to determine the proper catalog number basedon the transformer VA, and primary and secondary voltage requirements.Regulation Data ChartInrush VA At 20% Power FactorNEMA/IEC NEMA/IEC NEMA/IECTransformer 95% Sec 90% Sec 85% SecVA Ratings Voltage Voltage Voltage25 100/––– 130/––– 150/–––50 170/190 200/220 240/27075 310/350 410/460 540/600100 370/410 540/600 730/810150 780/860 930/1030 1150/1270200 810/900 1150/1270 1450/1600250 1400/1540 1900/2090 2300/2530300 1900/2090 2700/2970 3850/4240350 3100/3410 3650/4020 4800/5280500 4000/4400 5300/5830 7000/7700750 8300/9130 11000/12100 14000/154001000 15000/––– 21000/––– 27000/–––1000 9000/––– 13000/––– 18500/–––1500 10500/––– 15000/––– 205000/–––2000 17000/––– 25500/––– 34000/–––3000 24000/––– 36000/––– 47500/–––5000 55000/––– 92500/––– 115000/–––To comply with NEMA standards, which require all magnetic devices to operate successfully at 85% of rated voltage, the90% secondary voltage column is most often used in selecting a transformer. For units with Class 105°C insulation systems. For units with Class 180°C insulation systems.Primary Fuse Kit Installation—Class MT Transformer with Primary Fuse Kit, KCCFPX2R16-76Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Industrial Control Power TransformersDomestic, Class MTSelectionOrdering Information Use the Voltage Table to determine theprimary and secondary voltage required. Field Modifications see page 16-79. Dimensions see page 16-113. Wiring Diagrams see page 16-147.Voltage TablePrimary Volts 50/60 Hz Secondary Volts Letter240 X 480, 230 X 460, 220 X 440 120/115/110 A240 X 480 24 B120 X 240 24 C115 X 230 24 D550/575/600 110/115/120 E208/277 120 F208/230/460 115 G230/460/575 95/115 H380/400/415 110 X 220 I208/230/460, 200/220/440,240/480 24 X 115, 23 X 110, 25 X 120 J240/416/480/600, 230/400/460/575, 99/120/130, 95/115/125,220/380/440/550, 208/500 91/110/120, 85/100/110L240 X 480 120 X 240 MVoltage Letter Voltage Letter Voltage Letter Voltage Letter Voltage Letter Voltage LetterVAA B C D E F Rating Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $50 MT0050A 46.00 MT0050B 54.00 MT0050C 54.00 MT0050D 54.00 MT0050E 54.00 MT0050F 54.0075 MT0075A 55.00 MT0075B 65.00 MT0075C 65.00 MT0075D 65.00 MT0075E 63.00 MT0075F 57.00100 MT0100A 62.00 MT0100B 71.00 MT0100C 71.00 MT0100D 71.00 MT0100E 66.00 MT0100F 66.00150 MT0150A 66.00 MT0150B 91.00 MT0150C 91.00 MT0150D 91.00 MT0150E 79.00 MT0150F 79.00200 MT0200A 82.00 MT0200B 116.00 MT0200C 116.00 MT0200D 116.00 MT0200E 98.00 MT0200F 98.00250 MT0250A 96.00 MT0250B 136.00 MT0250C 136.00 MT0250D 136.00 MT0250E 121.00 MT0250F 121.00300 MT0300A 105.00 MT0300B 143.00 MT0300C 143.00 MT0300D 143.00 MT0300E 143.00 MT0300F 143.00350 MT0350A 113.00 MT0350B 150.00 MT0350C 150.00 MT0350D 150.00 MT0350E 153.00 MT0350F 151.00500 MT0500A 139.00 MT0500B 188.00 MT0500C 188.00 MT0500D 188.00 MT0500E 163.00 MT0500F 163.00750 MT0750A 192.00 MT0750B 168.00 — — — — MT0750E 186.00 MT0750F 172.001000 MT1000A 234.00 — — — — — — MT1000E 288.00 — —1500 MT1500A 333.00 — — — — — — — — — —2000 MT2000A 405.00 — — — — — — — — — —3000 MT3000A 563.00 — — — — — — — — — —5000 MT5000A 945.00 — — — — — — — — — —16 CONTROLPRODUCTSVoltage Letter Voltage Letter Voltage Letter Voltage Letter Voltage Letter Voltage LetterVAG H I J L M Rating Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $50 MT0050G 75.00 MT0050H 75.00 MT0050I 54.00 MT0050J 75.00 MT0050L 77.00 MT0050M 77.0075 MT0075G 80.00 MT0075H 80.00 MT0075I 65.00 MT0075J 80.00 — — MT0075M 82.00100 MT0100G 84.00 MT0100H 84.00 MT0100I 71.00 MT0100J 84.00 MT0100L 86.00 MT0100M 86.00150 MT0150G 108.00 MT0150H 108.00 MT0150I 91.00 MT0150J 108.00 MT0150L 113.00 MT0150M 113.00200 MT0200G 140.00 MT0200H 140.00 MT0200I 116.00 MT0200J 140.00 — — MT0200M 145.00250 MT0250G 148.00 MT0250H 148.00 MT0250I 136.00 MT0250J 148.00 MT0250L 153.00 MT0250M 153.00300 MT0300G 173.00 MT0300H 173.00 MT0300I 143.00 MT0300J 173.00 — — MT0300M 180.00350 MT0350G 182.00 MT0350H — MT0350I 150.00 MT0350J 182.00 MT0350L 188.00 MT0350M 188.00500 MT0500G 203.00 MT0500H 203.00 MT0500I 188.00 MT0500J 203.00 MT0500L 211.00 MT0500M 211.00750 MT0750G 281.00 MT0750H 281.00 MT0750I 236.00 — — MT0750L 293.00 MT0750M 293.001000 MT1000G 332.00 MT1000H 332.00 MT1000I 332.00 — — — — — —1500 MT1500G 430.00 MT1500H 430.00 MT1500I 374.00 — — — — — —2000 MT2000G 574.00 MT2000H 574.00 MT2000I 574.00 — — — — — —3000 MT3000G 718.00 MT3000H 718.00 MT3000I 718.00 — — — — — —5000 MT5000G 1149.00 MT5000H 1149.00 — — — — — — — —NEMA & GeneralPurpose Control Includes secondary fuse clip on sizes 50–750VA. A 2-pole primary Class CC fuse kit is available for fieldinstallation. See page 16-79 for details. CatalogNumber: KCCFPX2R. Includes secondary fuse clip on sizes 50–500VA. Does not include secondary fuse clip on any size.Discount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-77

Industrial Control Power TransformersInternational, Class MTGSelectionOrdering Information Use the Voltage Table to determinethe primary and secondary voltagerequired. Field Modifications see page 16-79. Dimensions see page 16-113. Wiring Diagrams see page 16-147.Voltage TablePrimary Volts 50/60 Hz Secondary Volts Letter240 X 480, 230 X 460, 220 X 440 120/115/110 A240 X 480 24 B120 X 240 24 C550/575/600 110/115/120 E380/400/415 110 X 220 I208/230/460, 200/220/440, 240/480 24 X 115, 23 X 110, 25 X 120 J380 24 PVoltage Letter Voltage Letter Voltage Letter Voltage Letter Voltage Letter Voltage Letter Voltage LetterVAA B C E I J PRating Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $ Catalog No List Price $50 MTG0050A 62.00 MTG0050B 71.00 MTG0050C 71.00 MTG0050E 71.00 MTG0050I 100.00 MTG0050J 72.00 MTG0050P 71.0075 MTG0075A 72.00 MTG0075B 86.00 MTG0075C 86.00 MTG0075E 80.00 MTG0075I 105.00 MTG0075J 81.00 MTG0075P 86.00100 MTG0100A 82.00 MTG0100B 97.00 MTG0100C 97.00 MTG0100E 87.00 MTG0100I 110.00 MTG0100J 110.00 MTG0100P 97.00150 MTG0150A 87.00 MTG0150B 122.00 MTG0150C 122.00 MTG0150E 105.00 MTG0150I 145.00 MTG0150J 153.00 MTG0150P 122.00200 MTG0200A 109.00 MTG0200B 155.00 MTG0200C 155.00 MTG0200E 150.00 MTG0200I 158.00 MTG0200J 184.00 MTG0200P 155.00250 MTG0250A 125.00 MTG0250B 183.00 MTG0250C 183.00 MTG0250E 187.00 MTG0250I 200.00 MTG0250J 193.00 MTG0250P 183.00300 MTG0300A 141.00 MTG0300B 192.00 MTG0300C 192.00 MTG0300E 192.00 MTG0300I 219.00 MTG0300J 247.00 MTG0300P 192.00350 MTG0350A 150.00 MTG0350B 218.00 MTG0350C 218.00 MTG0350E 229.00 MTG0350I 243.00 MTG0350J 258.00 MTG0350P 218.00500 MTG0500A 186.00 MTG0500B 252.00 MTG0500C 252.00 MTG0500E 252.00 MTG0500I 272.00 MTG0500J 272.00 MTG0500P 252.00750 MTG0750A 257.00 MTG0750B 354.00 MTG0750C 354.00 MTG0750E 354.00 MTG0750I 378.00 MTG0750J 517.00 MTG0750P 354.001000 MTG1000A 309.00 MTG1000B 460.00 MTG1000C — — — — — MTG1000J 574.00 — —1500 MTG1500A 424.00 — — — — — — — — — — — —2000 MTG2000A 475.00 — — — — — — — — — — — —3000 MTG3000A 689.00 — — — — — — — — — — — —5000 MTG5000A 1033.00 — — — — — — — — — — — —NEMA & GeneralPurpose ControlCONTROLPRODUCTS1616-78Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Field Modification KitsClass SMF, MMS, MRSAccessories—Class SMFCatalog ListDescription Number Price $Handle Guard Kit with Padlock Provision SMFFL1 8.60Emergency Off Actuator SMFPB1 22.00Additional Key for Key Operated Devices SMFFK1 2.90Pilot Light Kits—Class MMS, MRS RedGreenVoltagePilot LightPilot LightDevice Rating Catalog Number List Price $ Catalog Number List Price $Class SMF 115–277V AC SMFPL10 26.00 SMFPL10G 26.00Accessories—Class MMS, MRSSelectionListDescription Catalog Number Price $Handle Guard Kit with Padlock Provision SMFFL1 8.60Emergency Off Actuator SMFPB1 22.00Additional Key for Key Operated Devices SMFFK1 2.90Pilot Light Kits—Class MMS, MRS RedGreenVoltagePilot LightPilot LightDevice Rating Catalog Number List Price $ Catalog Number List Price $110–120V AC SMFPL11 43.00 SMFPL11G 43.00Class MMS 208–277V AC SMFPL12 43.00 SMFPL12G 43.00440–600V AC SMFPL13 43.00 SMFPL13G 43.00Enclosures—Class SMFCatalog ListEnclosure Type For Use With SMF Number Price $Standard SizeFO1, FO1P, FO2, FO2P, FO3,NEMA 1FO3P, FO4, FO4PGeneral PurposeSMFFE2 23.00OversizedFO1, FO1P, FO2, FO2P, FO3,NEMA Type 1FO3P, FO4, FO4PGeneral PurposeSMFFE1 26.00NEMA 3R, 4, 12FO1, FO1P, FO2, FO2P, FO3,WatertightFO3P, FO4, FO4PDust-tightSMF40BC1 138.00Enclosures—Class MMSCatalog ListEnclosure Type For Use With MMS Number Price $Standard SizeKO1, KO1P, KO1B, KO2,NEMA 1 KO2A, KO2B, KO3, KO3A, MMSKE3 26.00General PurposeKO3B, KO4, KO4A, KO4BOversizedKO1, KO2B, KO2C, KO3,NEMA Type 1 KO3A, KO3B, KO4, KO4B, MMSKE1 26.00General PurposeKO4C, KO2JumboKO1, KO2B, KO2C, KO3,NEMA Type 1 KO3A, KO3B, KO4, KO4B, MMSKE2 51.00General PurposeKO4C, KO2NEMA 3R, 4, 12KO1, KO2B, KO2C, KO3,Watertight KO3A, KO3B, KO4, KO4B, SMF40BC1 138.00Dust-tightKO4CNameplates—Class SMFWithoutWithPilot LightPilot LightNameplate Catalog List Catalog ListFor Use On Marking Number Price $ Number Price $Standardcommercial switch boxcover including None SMFFN2 13.00 — —stainless steel platesNameplates—Class MMSWithoutWithPilot LightPilot LightNameplate Catalog List Catalog ListFor Use On Marking Number Price $ Number Price $Standardcommercial switch boxcover including None SMFFN1 13.00 — —stainless steel plates16 CONTROLPRODUCTSStainless Steel Plate None SMFFSN3 30.50 SMFFSN4 30.50NEMA 1 None SMFFN30 13.00 SMFFN40 13.00surface mounted enclosure High SMFFN31 13.00 SMFFN41 13.00or gray flush plate Low SMFFN32 13.00 SMFFN42 13.00Replacement Parts—Class SMF, MMSNEMA 1 None SMFFN10 13.00 SMFFN20 13.00surface mounted High SMFFN11 13.00 SMFFN21 13.00enclosure or Low SMFFN12 13.00 SMFFN22 13.00gray flush plate Forward SMFFN13 13.00 — —Reverse SMFFN14 13.00 SMFFN24 13.00ListDescription Catalog Number Price $Replacement Toggle Kits:Type FW and KW (NEMA 4 Metallic Enclosure) SMFHW1 26.00NEMA & GeneralPurpose Control Pilot lights can be field installed on standard NEMA 1general purpose surface mount enclosures, andNEMA 3R, 4 and 12 enclosures only.For flush mounting units a complete switch unit withpilot light must be ordered.Discount Schedule NEMA Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-79

Field Modification KitsClass 11 - 3RVSelection16CONTROLPRODUCTSNEMA & GeneralPurpose Control3RV1901-1D3RV1901-1A3RV1912-1CP03RV1902-1DP03RV1928-1HDescription Type Catalog Number List Price $Auxiliary Contact BlocksPlug in contact block 1 SPDT contact, NO/NC 3RV1901-1D 21.501 block per 3RV 1 NO 1 NC 3RV1901-1E 26.00mountable at the front 1 SPDT contact NO/NC electronic contact 3RV1901-1G 80.00Side mount auxiliary 1 NO 1 NC 3RV1901-1A 26.00contact with 2 NO 3RV1901-1B 26.00screw connection 2 NC 3RV1901-1C 26.001 side mount auxiliary 2 NO 2 NC 3RV1901-1J 26.00contact per 3RV mountableon the left-hand sideSignaling Contact BlockSignaling contact1 signaling contact per 3RV 1NO + 1NC for any tripmountable on the left-hand +side. Can also be fitted1NO + 1NC for short3RV1921-1M 43.00together with side mountcircuit trip only.auxiliary contact.Auxiliary ReleasesUndervoltage release AC 50Hz AC 60Hz1 undervoltage release — 120V 3RV1902-1AF0 66.00per 3RV mountable on the 230V 208V 3RV1902-1AM1 66.00right-hand side. 415V 240V 3RV1902-1AP0 66.00Cannot be fitted together 480V 3RV1902-1AV1 66.00with shunt trip.Undervoltage release AC 50Hz AC 60Hzwith early make contacts (2NO) 230V 240V 3RV1922-1CP0 83.001 undervoltage release 415V 480V 3RV1922-1CV1 83.00per 3RV mountable atthe right-hand side.Cannot be fitted togetherwith shunt trip.Shunt trip AC 50Hz/60Hz DC 1 shunt trip per 3RV 20–24V 20–70V 3RV1902-1DB0 66.00mountable at the right- 90–110V 70–190V 3RV1902-1DF0 66.00hand side. Cannot be 200–240V 190–330V 3RV1902-1DP0 66.00fitted together with 350–415V 330–500V 3RV1902-1DV0 66.00undervoltage release.Pilot LightsAC 50Hz/60Hz24V 49SBLBJ 130.00 For NEMA 1 enclosure only. Kit 120V 49SBLBF 130.00 includes Red, Green, and 240V 49SBLBG 130.00 Amber lenses 480V 49SBLBH 130.00 600V 49SBLBE 130.00 Lug KitRequired for Type E ManualFor 3RV with amp range:Combination Starter 0.11-22A up to 480V Max. 0.11-12.5A up to 3RV1928-1H 16.00575V MaxMountingPush-in Mounting Hole KitFor screw panel mounting Four mounting holes required for each 3RV. 3RB1900-0B 1.10of the 3RVSealing deviceAdjustment Dial coversFor sealing the FLAadjustment dial(Kit includes 10 covers)3RV1908-0P 2.103RV1901-0HFront mount auxiliary coverDoor OperatorsThru-the-door operatorsRotary operating mechanism, ratedNEMA 12, lockable with up to3 padlocks in the OFF position.Includes extension shift andconnecting element for the 3RV.For sealing the front mountauxiliary opening. (Kit includes 10 covers)3RV1901-0H 53.00130 mm depth 3RV1926-0B 104.00With Black Handle330 mm depth withsupporting bracket3RV1926-0K 124.00 100% on time. 5 sec. max. on time. Discount Code: PILO. Compatible for use in dusty atmospheres. Contactsrated for 1-300mA @ 3-60V.16-80Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule IEC

Field Modification KitsPilot DevicesSelectionPush Buttons and Enclosure Controller Size or Catalog ListSelector Switches Class Type (Lighting Rating) Type Number Price $49SBPB549SBSB149SAP0549SAS01Start, Stop Push Buttons 49SAPB5 69.00Open 00-4 Hand-Off-Auto Selector Switch 49SASB1 69.00Off-On Selector Switch 49SASB4 69.00Start, Stop Push Buttons 49SBPB5 69.0000-4 or (20–100A) Hand-Off-Auto Selector Switch 49SBSB1 69.00Off-On Selector Switch 49SBSB4 69.0014, 40, LEN, CLM 1 Start, Stop Push Buttons 49SAP05 69.00Hand-Off-Auto Selector Switch 49SAS01 69.005-8 or (200–400A)Keyed Hand-Off-Auto (key removable in all positions) 49SAS09 133.00Off-On Selector Switch 49SAS04 69.00Start, Stop Push Buttons 49SAP05 69.0012, 4/4X 00-8 or (20–400A)Hand-Off-Auto Selector Switch 49SAS01 69.00Keyed Hand-Off-Auto (key removable in all positions) 49SAS09 133.00Off-On Selector Switch 49SAS04 69.00Open 00-4 Forward-Off-Reverse Selector Switch 49SASB2 69.0000-4 Forward-Off-Reverse Selector Switch 49SBSB2 69.0022, 431Forward, Reverse, Stop Push Buttons 49SAP02 130.005-8Forward-Off-Reverse Selector Switch 49SAS02 69.0012, 4/4X 0-8Forward, Reverse, Stop Push Buttons 49SAP02 130.00Forward-Off-Reverse Selector Switch 49SAS02 69.00Open 0-4 High-Off-Low Selector Switch 49SASB3 69.000-1 3 ⁄4 High-Off-Low Selector Switch 49SBSB3 69.0030 (2S1W)1High, Low, Stop Push Buttons 49SAP03 130.002-4High-Off-Low Selector Switch 49SAS03 69.0012, 4/4X 0-4High, Low, Stop Push Buttons 49SAP03 130.00High-Off-Low Selector Switch 49SAS03 69.00Open 0-4 High-Off-Low Selector Switch 49SASB3 69.001 0-4 High-Off-Low Selector Switch 49SBSB3 69.0030 (2S2W)High, Low, Stop Push Buttons 49SAP03 130.0012, 4/4X 0-4High-Off-Low Selector Switch 49SAS03 69.0017, 18, 36, 37, 83, 84,LED,LEF, LEB, CMN ,CMF , CMB 1, 12, 4/4X 0-8 (20-400A)25, 26 1, 12, 4/4X 0-832 1, 12, 4/4X 0-4Start, Stop Push Buttons 49SAP05 69.00Hand-Off-Auto Selector Switch 49SAS01 69.00Keyed Hand-Off-Auto (key removable in all positions) 49SAS09 133.00Off-On Selector Switch 49SAS04 69.00Forward, Reverse, Stop Push Buttons 49SAP02 130.00Forward-Off-Reverse Selector Switch 49SAS02 69.00High, Low, Stop Push Buttons 49SAP03 130.00High-Off-Low Selector Switch 49SAS03 69.0016 CONTROLPRODUCTSNEMA & GeneralPurpose Control To be used for replacement of switch only. Does notinclude relay or extra contact block on 30-400A CLMand CM Lighting Contactors. Class 49SB not availablefor these devices.Discount Schedule NEMA Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-81

Field Modification KitsNEMA, Lighting and Heating Contactors, 20 Amp CLM, CMB, CMF, CMNSolid State Control Module Kits For Lighting and Heating Contactors SelectionCLM 20 AmpContactor Kit Catalog List Catalog List Catalog ListDescription Accessory Number Price $ Accessory Number Price $ Accessory Number Price $120V AC, 50/60 Hz CLM4379771 415.00 CLM4379781 454.00 CLM4379791 484.0024V AC/DC,50/60 Hz240/277V AC,50/60 Hz12V AC/DC,50/60 Hz47(2-Wire Control)(2W)Protective Shielding for NEMA ProductsCLM4379772 415.0048CLM4379782 454.0049CLM4379792 484.00(3-Wire Control)(Start/Stop Control)CLM4379773 415.00 (3W)CLM4379783 454.00 (3WS)CLM4379793 484.00CLM4379774 415.00 CLM4379784 454.00 CLM4379794 484.00NEW!16CONTROLPRODUCTSNEMA & GeneralPurpose ControlClass 14, 22, 30, 40, 43Contactor orStarter Size 00–1 3 ⁄4 List Price $ 2–2 1 ⁄2 List Price $ 3–3 1 ⁄2 List Price $ 4 List Price $Contactor ShieldCatalog NumberStarter ShieldCatalog NumberClass 17, 25, 32, 87DisconnectSizeClass 4049PSC1 45.00 49PSC2 52.00 49PSC3 62.00 49PSC4 76.0049PSS1 52.00 49PSS2 59.00 49PSS3 78.00 49PSS4 83.00CatalogNumber List Price $30A 49PSD5 74.0060 & 100A 49PSD6 79.00200A 49PSD7 84.00Class 14Disconnect with protective shield These kits are only for use with 20A mechanically heldlighting contactors.16-82Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Field Modification KitsPilot LightsSelectionEnclosure Controller Size or Catalog ListDescription Class Type (Lighting Rating) Lens Color(s) Legend(s) Voltage Number Price $49SBLBF49SPL0BRF49SBLBL1 00–4 or (20–200A) Red, Green, AmberON, RUN, OFF 24 Vac 49SBLBJ 130.00,OL TRIPPED 120 Vac 49SBLBF 130.00,208/240/277 Vac 49SBLBG 130.00FORWARD, REVERSE,480 Vac 49SBLBH 130.00LOW, HIGH600 Vac 49SBLBE 130.0024 Vac (Full Voltage) 49SPL0BRJ 130.0014, 40, 22 , 43 ,120 Vac 49SPL0BRF 130.00Red30 (2S2W) ,ON 240 Vac 49SPL0BRG 130.00(Transformer Type)LEN, CLM 480 Vac 49SPL0BRH 130.001 5–8 or (300–400A)600 Vac 49SPL0BRE 130.0024 Vac (Full Voltage) 49SPL0AGJ 182.00120 Vac 49SPL0AGF 182.0012, 4/4X 0–8 or (20–400A) GreenOFF(Transformer Type)240 Vac 49SPL0AGG 182.00480 Vac 49SPL0AGH 182.00600 Vac 49SPL0AGE 182.001 0–4 Red, Green, AmberON, RUN, OFF 24 Vac 49SBLBJ 130.00,OL TRIPPED 120 Vac 49SBLBF 130.00,208/240/277 Vac 49SBLBG 130.00FORWARD, REVERSE,480 Vac 49SBLBH 130.00LOW, HIGH600 Vac 49SBLBE 130.0024 Vac (Full Voltage) 49SPL0BRJ 130.0030 (2S1W) 120 Vac 49SPL0BRF 130.00RedON 240 Vac 49SPL0BRG 130.00(Transformer Type)480 Vac 49SPL0BRH 130.001 2–4600 Vac 49SPL0BRE 130.0024 Vac (Full Voltage) 49SPL0AGJ 182.00120 Vac 49SPL0AGF 182.0012, 4/4X 0–4 GreenOFF(Transformer Type)240 Vac 49SPL0AGG 182.00480 Vac 49SPL0AGH 182.00600 Vac 49SPL0AGE 182.0024 Vac (Full Voltage) 49SPL0BRJ 130.00120 Vac 49SPL0BRF 130.00RedON 240 Vac 49SPL0BRG 130.00(Transformer Type)17, 18, 25, 26 , 32 , 480 Vac 49SPL0BRH 130.0036, 37, 83, 84, 87, 88,600 Vac 49SPL0BRE 130.001, 12, 4/4X 0–6 (20–400A)LED, LEF, LEB, 24 Vac (Full Voltage) 49SPL0AGJ 182.00CMN, CMF, CMB120 Vac 49SPL0AGF 182.00GreenOFF(Transformer Type)240 Vac 49SPL0AGG 182.00480 Vac 49SPL0AGH 182.00600 Vac 49SPL0AGE 182.00Lens Kit ONLY(30 (2S1W)) 0–1 3 ⁄4(14, 40, 22, 43, 30 (2S2W), 1 00–4 or (20–200A)Red, Green, Amber — — 49SBLBL 11.20LEN, CLM)16 CONTROLPRODUCTSNEMA & GeneralPurpose Control ”Off” PL requires: (1) N.C. aux contact, 49AB01 onsizes 00-4. Class 22, 25, 26, 30, 32, 43, 83 & 84 requires qty. of (2)pilot light kits. Does not apply to 49SB kits. Selectappropriate legend plate as a separate item per typeof starter; either “FORWARD” & “REVERSE” or“LOW” & “HIGH”. 2S2W is starter size 0–4. Includes NC aux contact for NEMA starter Size 0–4. “OL TRIPPED” requires (1) N.O. OL aux 49ASNO forESP 100 OL relay. Use suffix “91” for amb. comp. OLsize 00-2 1 ⁄2. Not available sizes 3-4.Discount Schedule NEMA Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-83

16CONTROLPRODUCTSField Modification KitsNEMA, Reduced Voltage and LightingStarter/Contactor Auxiliary Contact KitsDisconnect Auxiliary Switch KitsSelectionDescription Class Size Type Catalog Number List Price $14, 17, 18, 22, 25, 26,30, 32, 36, 37, 40, 43,83, 84, 87, 8814, 17, 18, 22, 25, 26,36, 37, 40, 43, 87, 881 NO 49AB10 51.001 NC 49AB01 51.001 NC Early Break 49AB01EB 51.001 NC Late Break 49AB01LB 51.001 NC Extra Late Break 49AB01XLB 51.0000-4 1 NO Extra Late Make 49AB10XLM 51.001 NO & 1 NC 49AB11 103.002 NO 49AB20 103.004 NO 49AB40 206.003 NO & 1 NC 49AB31 206.002 NO & 2 NC 49AB22 206.002 NO 3RH1921-1EA20 21.50 5, 6 1 NO & 1 NC 3RH1921-1DA11 21.50 2 NC 3RH1921-1EA02 21.50 14, 17, 18, 22, 25, 26 1 NO & 1 NC (Inside L or R) 49CAL18-11 34.007, 840, 431 NO & 1 NC (Outside L or R) 49CAL18-11B 34.001 NO 49ACR0 14.301 NC 49ACRC 14.3020-60 Amps 2 NO 49ACR7 28.501 NO & 1 NC 49ACR6 28.50LEN, LED, LEF, LEB 2 NC 49ACR8 28.501 NO 49D22125001 51.00100 Amps 1 NC 49D22125002 51.001 NO/NC SPDT 49CE42SPDT 51.00200-400 Amps 1 NO/NC SPDT 3RH1921-1DA11 21.50 20 Amps1 NO/NC SPDT CLM4097291 97.002 NO/NC SPDT CLM4097292 193.001 NO & 1 NC CLMFCAK11 71.002 NC CLMFCAK02 71.0030-200 Amps2 NO CLMFCAK20 71.00CLM, CMN, CMF, CMB1 Coil Clearing NO & NC CLMFCCK11 71.001 NO & 1 NC CLMHCAK11 71.00300-400 Amps2 NC CLMHCAK02 71.002 NO CLMHCAK20 71.001 Coil Clearing NO & NC CLMHCCK11 71.00Disconnect Amp orDescription Class CB Rating Type Catalog Number List Price $Non-fusible 17, 25, 32, 37, 83, 84,or Fusible Type 87, 88, LED, LEF, CMN, CMF30 - 200A 2 NO/2 NC DPDT (NEMA A600) HA261234 266.00NEMA & GeneralPurpose ControlMCP 18, 26, 32, 37, 83, 84,87, 88, LEB, CMBControl Power Transformer Kits 45VA transformer kits will include secondary but notprimary fusing. Sizes 50VA and higher include16-84Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog3A–125A 1 NO/1 NC 240V A02ED62 540.00 250A 1 NO/1 NC 480V A02FD64 540.00 400A-600A (2) 1 NO/1 NC SPDT-480V A02JLD64 540.00 Recommended Transformer Size VA Transformer TableDescription Control Size Transformer VA Rating Catalog Number List Price $ Primary Volts Secondary Volts Code0–2 1 ⁄2 45 or 50 45 VA KT*050 155.00 120 24 13–3 1 ⁄2 75 50 VA KT*050P 207.00 208 24 G4 100 100 VA KT*100 216.00 208 120 H5-6 150 150 VA KT*150 289.00 240/480 24 47-8 300 200 VA KT*200 323.00 240/480 120 8Lighting Control 300 VA KT*300 398.00 277 24 5CLM 500 VA KT*500 475.00 277 120 720A, 2 - 12P 150 600 24 630A, 3P 100 Replace * with code from Transformer table. Kits used with NEMA 1 600 120 930A, 6 - 12P 200 general purpose lift-off cover type require extra wide enclosure.60A, 3P 100 Class 14 Sizes 0-2 1 ⁄260A, 4 - 6P 150 Class 30 (2S2W) Sizes 0-2 1 ⁄260A, 8 - 12P 250 Class 30 (2S1W) Sizes 0-1 3 ⁄4100/200A, 3P 200100/200A, 5P 250Transformer 300/400A, 3P 25050/60HZLEN20A, 3 - 12P 2530/60A, 3 - 6P 2530/60A, 9 - 12P 50100/200A, 3P 75300/400A, 3P 1502-pole primary fusing and 1-pole secondary fusing. Discount Code: IEC. Discount Code: MCCB.Discount Schedule NEMA

Field Modification KitsNEMA, Reduced Voltage and LightingMiscellaneous KitsSelectionEnclosure Controller Catalog ListDescription Class Type Size Number Price $49MBRSOverload Single Reset (Red) 14, 22, 30 4/4X 00–4 49MARSR 28.50ResetsSingle Reset (Blue)14, 22, 30,17, 18, 25, 26, 321, 12, 4/4X 00–4 49MBRS 25.00Miniature For use in any manufacturer’sUniversal Reset enclosure — 8 inches36, 37 1, 12 — 49MARB 17.90ESP100 Reset For use with Siemens MCC’s and—Extender other deep enclosures. Attaches to OL devices— — 49ASRE 14.60Oil TightBootFor Single and Multi Unitusing 49MARSR Resets — 4, 4X — 52AABA 16.40Starter Mounting Fits Allen Bradley 509 and 709,Adapter PlateWestinghouse A20014 Open 00–1 49D70084 14.60ESP100 ESP100 48 Open 00–1 3 ⁄4 49ASMP1 14.30Mounting Plate Mounting Plate Kit 2–2 1 ⁄2 49ASMP2 14.303–4 49ASMP3 14.30Furnas Brand Thermal OverloadRetrofit Kit, Sizes 0–13⁄4A, A1 Frame Size 49ASRFTC 14.60Includes terminal block and stabs forOverloadconnection to contactor terminals to pro-0–1AllAllLug Extender vide connections at bottom of ESP100 (9–40A Ranges)49ASLE 23.00overloadCan be closed with wire seal to deterOverload Tamper0–4 49ASTCtampering of ESP100 overload FLA All AllResistant Cover(9–135A Ranges) (Bag of 10)adjustment dial (Clear cover)29.501 Fuse All All 49MAFB1 17.90FuseFor 13 ⁄32 1 1 ⁄2 FusesBlock2 Fuses All All 49MAFB2 26.0030A MaxSuitable for Class CC fusesFor Rejection-Type Fuses 2 Fuses All All 49MAFB4 26.00Dust SealFor ESP100 overloadAll All 00–449ASDS(Bag of 10)29.5016 CONTROLPRODUCTSReplacement Dial CoverReplacement SeparateMounting Kit (Includedwith standard 48AS and48CS overloads)For ESP100 overload without00–1 (0.25–10A) 49ASDLAllAll29.50pass through windows (Bag of 10)For ESP100 overload without48AS, 48CS All 00–1 (0.25–10A) 49ASMS 14.60pass through windowsNEMA & GeneralPurpose ControlDiscount Schedule NEMA Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-85

Field Modification KitsNEMA, Reduced Voltage and LightingMiscellaneous KitsSelectionEnclosure ControllerDescription Class Type Size Catalog Number List Price $Mechanical Interlock 00–1 49CCF22H 61.00for Horizontally114, 40 Open⁄4 49EEF22H 61.00Mounted ContactorsIncludes wire2, 2 1 ⁄2 49GGF22H 61.003, 3 1 ⁄2 49HHP22H 77.004 49JJG22H 116.00Interlock Only 5, 6 3RT1954-2A 43.00 Wire Kit Only5 3RA1963-2A 357.00 14, 40 Open 6 3RA1973-2A 463.00 Base Plate Only5 3RA1962-2A 187.00 6 3RA1972-2A 213.00 Mechanical Interlock 14, 40 Open7 49VM750H 168.008 49VM1650H 1342.0000–1 49CCF22HP 69.001 3 ⁄4 49EEF22HP 69.00Includes wire &14, 40 Open 2, 2 1 ⁄2mounting plate49GGF22HP 69.003, 3 1 ⁄2 49HHP22HP 96.004 49JJG22HP 143.00Includes Left Rightmounting plate 14, 40 Open 2, 2 1 ⁄2 3, 3 1 ⁄2 49L107944 99.00(Different Frame Sizes) 3, 3 1 ⁄2 2, 2 1 ⁄2 49L107945 99.00Surge Suppressor for 120V ACSurge coil. Limits transient voltage All butAll 00–3 1 ⁄2Suppressor produced by the coil to 220% Class LE, CLM49D26344 35.00maximum peak line volts.Auxiliary NO 36A at 600V AC Max All but49SAF0 96.00All 00–1 3 ⁄4Power Pole NC 25A at 600V AC Max Class LE, CLM 49SAFC 96.0016CONTROLPRODUCTSNEMA & GeneralPurpose Control2 NC (mounts to contactor or power pole) 49LN02A 101.00Auxiliary 2 NO (mounts to contactor or power pole)49LN20A 101.00LEN, LED, LEF, LEB All 20 AmpsPower Pole 2 NO (mounts to contactor only) 49LS20A 101.001 NO (mounts to contactor only) 49LS10A 101.00Top or Bottom, 2-Pole CLM4097331 258.00Main ContactsTop, 3-PoleCLM4097332 290.00CLM All 20 AmpsLighting Contactors Top or Bottom, 4-Pole CLM4097333 355.00Top or Bottom, 6-Pole CLM4097334 419.00Mounting Kit for Open LEN, CLM Open 30, 60 Amp 49MCMPMA 24.00Heating & Lighting6 - 12-polesLoad SideIncludes 3 power lugsPower Take for making extra All but All 00–1 3 ⁄4 49SAE 30.50Off Kit connections to the load Class LE, CLMside of the contactorLug Kit for Contactors For AL/CU Wire 14, 40 All 2-2 1 ⁄2 49SAAF 43.00Item Wire Range3-3 1 ⁄2 49SAAH 51.0049SAAF 2-144 75D35994001 89.0049SAAH 2/0-1475D35994001 250MCM-6For AL/CU Wire 14, 40 All 5, 6 3RT1966-4G 158.00Use CU Only 14, 40 All7 49ATK750-3 252.008 49ATK1650-6 626.00Ground Lug KitMeets CSA Standard 1 Conductor 2-14 All All All 49D11960001 8.9022.2 No 14-1973 For AL/CU WireLightning Arrestor All All All 49D45584002 276.00Backspin TimerOn delay timer that reduces3RP20 25-1AQ30 64.00risk of starting into a 87, 88 All All3RP20 25-1AP30 64.00backspinCovers the hole that isHole Plug typically used for the 87 All 1-4 49D41149006 23.00conduit hubIllustration Description Contactor Wire Size Catalog Number List Price $Lug KitNEMA size 4 (Vacuum)1 Kit = 1 Terminal block. 1 kit NEMA size 5 2/0 to 600 MCM, max. one 500MCMnecessary for each line and load. NEMA size 6 & one 600MCM3RT1966-4G 158.003RT1966-4G Discount Code: IEC. Surge Suppression for NEMA sizes 5 – 8 are suppliedinternal with the coil. For size 4 panel mount. Only 3 lugs are suplied for line or load.If lugs for line and load are required order 2 kits. Lug Kit for contactors include 3 terminals for line orload.16-86Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Field Modification KitsNEMA, Reduced Voltage and LightingSelectionFused and Non-Fused Disconnect Switch Kits (Includes load base plus line and load fuse clips) Basic Switch Switch Load Base Load BaseSwitch Catalog Catalog Catalog Catalog LugAmpere Number List Number List Kit Number List Number List WireRating Non-Fused Price $ Fused Price $ Description Class J Price $ Class H Price $ Size30 HNB612 77.00 HFB21 84.00 30A, 250V — — HBB21 56.00 #14-2 AWG (Cu/AI)HFB612 137.00 30A, 600V HBB612 81.00 HBB612 81.0060 HNB623 313.00 HFB22 141.00 60A, 250V — — HBB22 83.00 #14-2 AWG (Cu/AI)HFB62 169.00 60A, 600V HBB62 97.00 HBB62 97.00100 HNB623 313.00 HFB63 208.00 100A, 250V — — HBB63 176.00 #14-1/0 AWG (Cu/AI)100A, 600V HBB63 176.00200 HNB64 327.00 HFB64 447.00 200A, 250V — — HBB64 256.00 #6-300 AWG (Cu/AI)200A, 600V HBB64 256.00Class R Fuse Conversion KitsCatalog Number Description List Price $HR21 30A, 240V 83.00HR612 30A, 600V 83.00HR612 60A, 240V 83.00HR62 60A, 600V 83.00HR63 100A, 240/600V 54.00HR64 200A, 240/600V 54.00Hazardous Location Accessories For Enclosure Types 7 & 9Description Conduit Size Inches Catalog Number List Price $Install in bottom as drain.Install in top as breather.Breather/Drain Suitable for Class I groups C & D and 51AADB 41.00 for Class II groups F & G applications only.for 1 ⁄2" NPT.Hole PlugsFor tapered NPT conduit openings.1⁄2 51AAHA 4.20 3⁄4 51AAHB 4.60 1 51AAHC 5.10 1 1 ⁄2 51AAHD 8.20 2 51AAHE 13.80 2 1 ⁄2 51AAHF 21.00 3⁄4– 1 ⁄2 51AARBA 4.20 1– 1 ⁄2 51AARCA 4.60 1 1 ⁄2– 3 ⁄4 51AARDB 10.20 1 1 ⁄2–1 51AARDC 10.20 Cast aluminum, UL Recognized and 2 1 ⁄2– 3 ⁄4 51AARFB 31.00 CSA Certified. Used to reduce existing 2 1 ⁄2–1 51AARFC 29.50 Reducer Bushings tapered NPT conduit opening when 2 1 ⁄2–1 1 ⁄2 51AARFD 25.50 required. 2 1 ⁄2–2 51AARFE 25.50 Conduit Hubs3–1 51AARGC 41.50 3–1 1 ⁄2 51AARGD 41.50 3–2 51AARGE 32.50 3–2 1 ⁄2 51AARGF 32.50 Conduit Controller Enclosure Catalog ListDescription Size Class Size Type Number Price $16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlConduit Hubs For EnclosuresNoncombination - NEMA 12may be field modified for NEMA 3/3R.Combination - NEMA 12 may be fieldmodified for NEMA 3/3R/4 enclosure.Use UL Listed conduit hub forthe appropriate NEMA type.NEMA 3R requires the location of the conduithub to be at a level above the lowest live partand holes of 1/8" dia. to be added in thebottom of the enclosure.Does not apply to class 87 Pump Panels.3⁄4" 49MACML 19.001" 49MACMD 21.00Metal Hub 1 1 ⁄2" All All 12, 3, 3R, 4 49MACMN 26.002" 49MACMF 33.002 1 ⁄2" 49MACMG 72.001" 75D41149001 19.00Metal Hub 1 1 ⁄2" 87 All 3R 75D41149003 19.002" 75D41149004 19.002 1 ⁄2" 75D41149005 19.00 Discount Code: PILO. Discount code: HDSS. For Class R fuses order Class H kit from this table andthe Class R conversion kit.Discount Schedule NEMA Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-87

Field Modification KitsNEMA, Overload RelaysSirius 3RB20SelectionIllustration Description For Overload Type Catalog Number List Price $Reset mechanismsReset plungerMounts directly to overload relay. Requires 3RB206 3RU1900-1A 12.80 separate reset operator in enclosure door. Kitincludes reset plunger, holder and funnel.Reset plunger with reset buttonCable length 3RU1900-1B 59.00 Flexible cable reset mechanism15.75 in (400mm)Requires a 6.5 mm hole in the3RB206enclosure with a maximumCable lengthenclosure thickness of 8 mm. 23.62 in (600mm) 3RU1900-1C 64.00 Flexible resetCoversTamper resistant cover for current setting and 3RB206 3RB2984-0 6.00 manual/ automatic reset button.Competitive Retrofit Overload PlatesNEMAPlateManufacturer Size Part Number List Price $A-B 0, 1 49D57090 15.60A-B 2 49D57161 15.60Sq. D 0, 1 49D57091 15.6016CONTROLPRODUCTSElectronic Coil System with Remaining Lifetime Indication and 24VDC PLC Output21 - 27V 96 - 127V 200 - 277VClass Size Model Type Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $All5P – – 3RT1965-5PF31 575.00 3RT1965-5PP31 575.00V – – 3RT1966-5PF31 660.00 3RT1966-5PP31 660.006P – – 3RT1975-5PF31 937.00 3RT1975-5PP31 937.00V – – 3RT1976-5PF31 958.00 3RT1976-5PP31 958.00Overload Auxiliary Contact KitDescription Class Size Type Catalog Number List Price $All ESP100 00–41 NO (NEMA A600) 49ASN0 35.001 NC (NEMA A600) 49ASNC 35.00NEMA & GeneralPurpose Control Discount Code: IEC.16-88Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Field Modification KitsClass MT, MTGFuse Blocks, Touch-Safe Terminal CoversInternational Fusing SelectionCatalog Number Description List Price $Catalog Number Description List Price $2-Pole Primary Class CCFuse Block for domesticfusing. Max 600V.-(Single- ole cover kits,if required are listedbelow. One cover kitrequired per pole.)32.001-Pole Fuse Block,Touch-Safe. Up to 6.3Afor 5 mm 20 mm or5 mm 25 mm (RequiresDIN Rail Mounting)7.80 8WA1011-1SF12KCCFP2RG1-Pole SecondaryMidget Fuse Block for13/32 1 1 ⁄2 domesticFusing. Max 250V.(Single pole cover kits,if required are listedbelow.)11.603NW70111-Pole Fuse Block,Touch-Safe 25A, for10 38 mm CylindricalFuses. (Requires DINRail Mounting.)12.00 KCCF1G2-Pole Fuse Block,Touch-Safe 25A, for10 38 mm CylindricalFuses. (Requires DINRail Mounting.)27.00 16 CONTROLPRODUCTSKCCFBCKSingle Pole Fuse Blockcover Kit for domesticfuse blocks listed above.(For primary or secondary)2-Kits required for 2-polefuse block.13.003NW70211-Pole Fuse Block,Touch-Safe 4-50A, for14 51 mm CylindricalFuses. (Requires DINRail Mounting.)29.00 NEMA & GeneralPurpose Control3NW7111Snap-On TransformerTerminal Touch-Safe CoverKit. (Includes primary andsecondary covers.)11.60Fuse Block DIN RailMounting for separatescrew mounting to panel.(Max 2-pole 2-25A sizeper rail.)(Max 1-pole 4-50A sizeper rail.)3.80 KTTSC4P8WA1815 Discount Code: IEC.Discount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-89

Heavy Duty ControlNon-Combination Enclosure Kits, Class 4949 E B 14 E B 11 07 05 RSelectionClass49 — FieldKitTypeE — EnclosureOnly ModelB — ModelC — 2002Product Class14 — Class 14, 4022 — Class 22, 4330 — Class 30Starter SizeE — 00, 0, 1, 1 3 ⁄4G — 2, 2 1 ⁄2I — 3, 3 1 ⁄2J — 4NEMA TypeB — NEMA 10 — NEMA 12W — NEMA 4 S.S.Width(In Inches)Height(In Inches)Depth(In Inches)Reset InstallationR — ResetNon-Reversing Starters & Contactors Class 14, 40NEMA 1 NEMA 4/4X Stainless NEMA 12/3/3R General Purpose (Clamshell) Watertight, Dust-tight, Corrosion Resistant Industrial Use, Weatherproof Without CPT With CPT (Extra Wide) Without CPT With CPT (Extra Wide) Without CPT With CPT (Extra Wide)Model C EnclosureModel C EnclosureMaxModel B EnclosureModel B EnclosureMaxModel B EnclosureModel B EnclosureMaxList CPT List List CPT List List CPT ListSize Catalog Number Price $ Catalog Number VA Price $ Catalog Number Price $ Catalog Number VA Price $ Catalog Number Price $ Catalog Number VA Price $00–1 3 ⁄4 49EC14EB110705R 61.00 49EC14IB201208R 200 235.00 49EB14EW130806R 414.00 49EB22EW131306R 689.00 49EB14E0130806R 224.00 49EB22E0131306R 293.002, 2 1 ⁄2 49EC14GB140807R 130.00 49EC14IB201208R 200 235.00 49EB14GW160907R 879.00 49EB22GW161406R 1301.00 49EB14G0160907R 354.00 49EB22G0161406R 603.003, 3 1 ⁄2 49EC14IB201208R 235.00 49EC14IB201208R 100 235.00 49EB14JW261408R 1861.00 49EB14JW261408R 1861.00 49EB14J0261408R 1102.00 49EB14J0261408R 1102.003, 3 1 ⁄2 — — 49EC14JB251409R 250 361.00 — — — — — — — —4 49EC14JB251409R 361.00 49EC14JB251409R 300 361.00 49EB14JW261408R 1861.00 49EB22JW302410R 2791.00 49EB14J0261408R 1102.00 49EB22J0302410R 1326.00Reversing Starters & Reversing Contactors Class 22, 4316CONTROLPRODUCTSNEMA 1 NEMA 4/4X Stainless NEMA 12/3/3R General Purpose (Clamshell) Watertight, Dust-tight, Corrosion Resistant Industrial Use, Weatherproof Without CPT With CPT (Extra Wide) Without CPT With CPT (Extra Wide) Without CPT With CPT (Extra Wide)Model C EnclosureModel C EnclosureMaxModel B EnclosureModel B EnclosureMaxModel B EnclosureModel B EnclosureMaxList CPT List List CPT List List CPT ListSize Catalog Number Price $ Catalog Number VA Price $ Catalog Number Price $ Catalog Number VA Price $ Catalog Number Price $ Catalog Number VA Price $00–1 3 ⁄4 49EC14IB201208R 235.00 49EC14IB201208R 200 235.00 49EB22EW131306R 689.00 49EB22EW131306R 689.00 49EB22E0131306R 293.00 49EB22E0131306R 293.002, 2 1 ⁄2 49EC14IB201208R 235.00 49EC14IB201208R 200 235.00 49EB22GW161406R 1301.00 49EB22GW161406R 1301.00 49EB22G0161406R 603.00 49EB22G0161406R 603.003, 3 1 ⁄2 49EC14JB251409R 361.00 49EC14JB251409R 250 361.00 49EB22IW261808R 2791.00 49EB22JW302410R 2791.00 49EB22I0261808R 1326.00 49EB22J0302410R 1326.004 49EC14JB251409R 361.00 49EC14JB251409R 300 361.00 49EB22JW302410R 2791.00 49EB22JW302410R 2791.00 49EB22J0302410R 1326.00 49EB22J0302410R 1326.00Two-Speed Two-Winding Starters Class 30NEMA & GeneralPurpose ControlNEMA 1 NEMA 4/4X Stainless NEMA 12/3/3R Watertight, Dust-tight, Corrosion Resistant Industrial Use, Weatherproof Without CPT With CPT (Extra Wide) Without CPT With CPT (Extra Wide) Without CPT With CPT (Extra Wide)Model C EnclosureModel C EnclosureMaxModel B EnclosureModel B EnclosureMaxModel B EnclosureModel B EnclosureMaxList CPT List List CPT List List CPT ListSize Catalog Number Price $ Catalog Number VA Price $ Catalog Number Price $ Catalog Number VA Price $ Catalog Number Price $ Catalog Number VA Price $00–1 3 ⁄4 49EC14IB201208R 235.00 49EC14JB251409R 200 361.00 49EB30EW131306R 689.00 49EB30GW161808R 1301.00 49EB30E0131306R 293.00 49EB30G0161808R 603.002, 2 1 ⁄2 49EC14IB201208R 235.00 49EC14JB251409R 200 361.00 49EB30GW161406R 1301.00 49EB30GW161808R 1301.00 49EB30G0161406R 603.00 49EB30G0161808R 603.003, 3 1 ⁄2 49EC14JB251409R 361.00 49EB22JB302410R 300 422.00 49EB30IW261808R 2791.00 49EB22JW302410R 2791.00 49EB30I0261808R 1326.00 49EB22J0302410R 1326.004 49EC14JB251409R 361.00 49EB22JB302410R 300 422.00 49EB22JW302410R 2791.00 49EB22JW302410R 2791.00 49EB22J0302410R 1326.00 49EB22J0302410R 1326.00Two-Speed One-Winding Starters Class 30NEMA 1 NEMA 4/4X Stainless NEMA 12/3/3R General Purpose (Clamshell) Watertight, Dust-tight, Corrosion Resistant Industrial Use, Weatherproof Without CPT With CPT (Extra Wide) Without CPT With CPT (Extra Wide) Without CPT With CPT (Extra Wide)Model C EnclosureModel C EnclosureMaxModel B EnclosureModel B EnclosureMaxModel B EnclosureModel B EnclosureMaxList CPT List List CPT List List CPT ListSize Catalog Number Price $ Catalog Number VA Price $ Catalog Number Price $ Catalog Number VA Price $ Catalog Number Price $ Catalog Number VA Price $00–1 3 ⁄4 49EC14IB201208R 235.00 49EC14JB251409R 200 361.00 49EB30EW131306R 689.00 49EB30GW161808R 1301.00 49EB30E0131306R 293.00 49EB30G0161808R 603.002, 2 1 ⁄2 49EB30GB161808R 422.00 49EB22JB302410R 300 422.00 49EB30GW161808R 1301.00 49EB22IW261808R 2791.00 49EB30G0161808R 603.00 49EB22I0261808R 1326.003, 3 1 ⁄2 49EB30IB192208R 448.00 49EB22JB302410R 300 422.00 49EB22JW302410R 2791.00 49EB22JW302410R 2791.00 49EB22J0302410R 1326.00 49EB22J0302410R 1326.004 49EB22JB302410R 422.00 49EB22JB302410R 300 422.00 49EB22JW302410R 2791.00 49EB22JW302410R 2791.00 49EB22J0302410R 1326.00 49EB22J0302410R 1326.00Note: Dimensions...See appropriate Product ClassOutline Drawing beginning on page 16-115. For conduit hubs and conversion instructions,see page 16-87. Clamshell enclosure suitable for one operating deviceand two pilot lights. See Field Mods page 16-79.16-90 Hinged cover enclosure suitable for one or more class52 operating devices and one or more class 52 pilotlights. See Field Mods page 16-79. Install NEMA 1 hole plug cat. no. 3SB1902-0AR(included) when the cover OL reset is not needed. Install NEMA 12 hole plug cat. no. 52ABH6 (notincluded) when the cover OL reset is not needed.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog Install NEMA 4X stainless steel hole plug cat. no.52ABHS (not included) when the cover OL reset is notneeded.Discount Schedule NEMA

Heavy Duty ControlLighting Enclosure TablesSelectionLighting & Heating Contactors Class LENEMA 1 NEMA 4/4X Stainless NEMA 12/3/3R General Purpose (Clamshell) Watertight, Corrosion Resistant Industrial Use Without CPT With CPT (Extra Wide) Without CPT With CPT (Extra Wide) Without CPT With CPT (Extra Wide)Model C Enclosure Model C Enclosure Model B Enclosure Model B Enclosure Model B Enclosure Model B EnclosureList Max List List Max List List Max ListSize Pole Catalog Number Price $ Catalog Number CPT Price $ Catalog Number Price $ Catalog Number CPT Price $ Catalog Number Price $ Catalog Number CPT Price $20A 2-12 49EC14EB110705R 61.00 49EC14IB201208R 200VA 235.00 49EB22GW161406R 1301.00 49EB22GW161406R — 1301.00 49EB22G0161406R 603.00 49EB22G0161406R — 603.0030A 3 49EC14EB110705R 61.00 49EC14IB201208R 200VA 235.00 49EB22GW161406R 1301.00 49EB22GW161406R — 1301.00 49EB22G0161406R 603.00 49EB22G0161406R — 603.0030A 6-9 49EC14IB201208R 235.00 49EC14IB201208R 200VA 235.00 49EB14JW261408R 1861.00 49EB14JW261408R — 1861.00 49EB14J0261408R 1102.00 49EB14J0261408R — 1102.0030A 12 49EC14IB201208R 235.00 49EC14JB251409R 250VA 361.00 49EB14JW261408R 1861.00 — — — 49EB14J0261408R 1102.00 — — —60A 3 49EC14EB110705R 61.00 49EC14IB201208R 200VA 235.00 49EB22GW161406R 1301.00 49EB22GW161406R — 1301.00 49EB22G0161406R 603.00 49EB22G0161406R — 603.0060A 6-9 49EC14IB201208R 235.00 49EC14IB201208R 200VA 235.00 49EB14JW261408R 1861.00 49EB14JW261408R — 1861.00 49EB14J0261408R 1102.00 49EB14J0261408R — 1102.0060A 12 49EC14IB201208R 235.00 49EC14JB251409R 250VA 361.00 49EB14JW261408R 1861.00 — — — 49EB14J0261408R 1102.00 — — —100A 3 49EC14IB201208R 235.00 49EC14IB201208R 200VA 235.00 49EB14JW261408R 1861.00 49EB14JW261408R — 1861.00 49EB14J0261408R 1102.00 49EB14J0261408R — 1102.00Lighting & Heating Contactors Class CLMNEMA 1 NEMA 4/4X Stainless NEMA 12/3/3R General Purpose (Clamshell) Watertight, Corrosion Resistant Industrial Use Without CPT With CPT (Extra Wide) Without CPT With CPT (Extra Wide) Without CPT With CPT (Extra Wide)Model C/B Enclosure Model C/B Enclosure Model B Enclosure Model B Enclosure Model B Enclosure Model B EnclosureList Max List List Max List List Max ListSize Pole Catalog Number Price $ Catalog Number CPT Price $ Catalog Number Price $ Catalog Number CPT Price $ Catalog Number Price $ Catalog Number CPT Price $20A 2-12 49EC14GB140807R 130.00 49EC14IB201208R 200VA 235.00 49EB22GW161406R 1301.00 49EB22GW161406R — 1301.00 49EB22G0161406R 603.00 49EB22G0161406R — 603.0030A 2-5 49EC14EB110705R 61.00 49EC14IB201208R 200VA 235.00 49EB22GW161406R 1301.00 49EB22GW161406R — 1301.00 49EB22G0161406R 603.00 49EB22G0161406R — 603.0030A 6-12 49EB30GB161808R 422.00 49EB30GB161808R 200VA 422.00 49EB30GW161808R 1301.00 49EB30GW161808R — 1301.00 49EB30G0161808R 603.00 49EB30G0161808R — 603.0060A 2-5 49EC14GB140807R 130.00 49EC14IB201208R 200VA 235.00 — — — — — — — — — —60A 6-12 49EB30IB192208R 448.00 49EB30IB192208R 250VA 448.00 — — — — — — — — — —100A 2-5 49EC14IB201208R 235.00 49EC14IB201208R 200VA 235.00 — — — — — — — — — —16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Dimensions...See appropriate Product ClassOutline Drawing beginning on page 16-115. For conduit hubs and conversion instructions,see page 16-87. Clamshell enclosure suitable for one operating deviceand two pilot lights. See Field Mods page 16-79. Hinged cover enclosure suitable for one or more class52 operating devices and one or more class 52 pilotlights. See Field Mods page 16-79. Install NEMA 1 hole plug cat. no. 3SB1902-0AR(included) when the cover OL reset is not needed. Install NEMA 12 hole plug cat. no. 52ABH6 (notincluded) when the cover OL reset is not needed. Install NEMA 4X stainless steel hole plug cat. no.52ABHS (not included) when the cover OL reset is notneeded.Discount Schedule NEMA Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-91

Combination Starter Enclosure KitsFeatures and BenefitsFeatures▪ Manufactured with a cold forming “TOX” process▪ 100kA short circuit rating when protected with class R fusesto 600V or MCP to 480V and when installing listed componentsfrom the instruction guide▪ Enclosure types available, Nema 1, 12, 3/3R and painted NEMA 4.Nema 12 field convertible to 3/3R/4 with the appropriate conduithub and drain hole▪ Pre-Drilled mounting panels▪ Heavy duty quarter turns▪ Industrial type disconnect handleDisconnect Type Enclosure Kit▪ Used to assemble both non-fusible and fusible combination starters▪ Accommodates Class 14 full voltage non-reversing (FVNR) NEMAstarters 00 – 4 including Siemens exclusive half sizes▪ Handle mechanism, power wire, mounting panel, reset assembly,and instruction guide included. Hardware for panel mounteddevices and disconnect switch are not included16CONTROLPRODUCTSNEMA & GeneralPurpose ControlMCP Type Enclosure Kit▪ Used to assemble combination starters with circuit breakers▪ Accommodates Class 14 full voltage non-reversing (FVRN) NEMAstarters 00 – 4 including Siemens exclusive half sizes▪ Handle mechanism, power wire, mounting panel, reset assemblyand instruction guide included. Circuit breaker not included however,mounting hardware for the circuit breaker isHow to Select the Required Kits to Assemble a Combination Starter1. From the catalog, select a class 14 open type starter with the requiredstarter size and overload relay type.2. Based on the starter size, select the enclosure kit from table 1a forfusible or non-fusible combination starters or select from table 1bfor combination starters with an MCP.3. For a non-fusible combination starter, select the disconnect switch kit from table 2a.For a fusible combination starter, select the appropriate disconnect switch, fuse clipkit, and class R rejection kit from table 2b (for H fusing, class R rejection kit not required).For combination starters with MCP, select the appropriate circuit breaker kit from table 3.Nomenclature for Combination Enclosure Kits49 E C 17 B B 24 11 08 RClass49 — Field KitTypeE — Enclosure KitModelC — Model CProduct Class17 — Disconnect Type18 — Circuit Breaker TypeHeightEnclosure Type (In Inches)B — NEMA 1N — NEMA 12/3R, 4 PaintedWidth(In Inches)Depth(In Inches)Reset InstallationR — Reset InstalledDisc / CB Amp RatingB — 30/60 amp disconnectC — 100 amp disconnectD— 125 amp breaker frameE — 150 amp breaker frameF — 200 amp disconnect16-92Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Combination Starter Enclosure KitsSelectionTable 1a - FVNR Combination Starter Kits for use with Disconnect DevicesNEMA 1Nema 12, 3/3R, 4 Painted Disc.Starter AmpGeneral PurposeIndustrial Use, Weatherproof, Watertight, Dust-tightSize Rating Catalog Number List Price $ Catalog Number List Price $0 - 2 60 49EC17BB241108R 292.00 49EC17BN241108R 334.002 1 ⁄2 - 3 100 49EC17CB242008R 390.00 49EC17CN242008R 546.003 1 ⁄2 - 4 200 49EC17FB362408R 901.00 49EC17FN362408R 948.00Table 1b. – FVNR Combination Starter Kits for use with MCP DevicesNEMA 1Nema 12, 3/3R, 4 Painted MaxStarter MCPGeneral PurposeIndustrial Use, Weatherproof, Watertight, Dust-tightSize Amps Catalog Number List Price $ Catalog Number List Price $0 - 2 50 49EC18DB241108R 292.00 49EC18DN241108R 334.002 1 ⁄2 - 3 100 49EC18DB242008R 390.00 49EC18DN242008R 546.003 1 ⁄2 125 49EC18DB362408R 824.00 49EC18DN362408R 877.004 150 49EC18EB362408R 901.00 49EC18EN362408R 948.00Table 2a – Non-Fusible Disconnect KitsDisconnect SwitchSwitch Rating Catalog Number List Price $30A HNB612 77.0060A HNB623 313.00100A HNB623 313.00200A HNB64 327.00Table 2b – Fusible Disconnect KitsDisconnect Switch Fuse Clip Kit Rejection Clips for Class R FusingFuse Clip Ratings Class Catalog Number List Price $ Catalog Number List Price $ Catalog Number List Price $30A-250V H HFB21 84.00 HBB21 56.00 HR21 83.0030A-600V H HFB612 137.00 HBB612 81.00 HR612 83.0060A-250V H HFB22 141.00 HBB22 83.00 HR612 83.0060A-600V H HFB62 169.00 HBB62 97.00 HR62 83.00100A-250V H HFB63 208.00 HBB63 176.00 HR63 54.00100A-600V H HFB63 208.00 HBB63 176.00 HR63 54.00200A-250V H HFB64 447.00 HBB64 256.00 HR64 54.00200A-600V H HFB64 447.00 HBB64 256.00 HR64 54.0016 CONTROLPRODUCTSTable 3 – Circuit Breaker KitsMCP Type Used with Solid StateMCP Type Used withOverload RelayThermal Overload RelayOverload Motor Circuit Motor CircuitStarter Amp Interrupter Circuit Interrupter CircuitSize Range Amps Breaker Kit Amps Breaker Kit0.75-3 3 ED63A003 3 ED63A0030 2.5-10 10 ED63A010 10 ED63A0109-18 25 ED63A025 25 ED63A0250.75-3 3 ED63A003 3 ED63A0031 2.5-10 10 ED63A010 10 ED63A0109-18 25 ED63A025 25 ED63A02513-27 30 ED63A030 30 ED63A0301 3 ⁄4 13-27 40 ED63A040 40 ED63A04020-40 50 ED63A050 50 ED63A0502 13-27 40 ED63A040 40 ED63A04022-45 50 ED63A050 50 ED63A0502 1 ⁄2 22-45 50 ED63A050 50 ED63A05030-60 100 ED63A100 100 ED63A1003 30-60 50 ED63A050 50 ED63A05045-90 100 ED63A100 100 ED63A1003 1 ⁄2 57-115 125 ED63A125 125 ED63A1254 67-135 150 FXD63A150L 150 FXD63A150LNEMA & GeneralPurpose Control For conduit hubs and conversion instructions,see page 16-87.Discount Schedule NEMA Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-93

Factory ModificationsSelectionOrdering InformationAll modifications will consist of Siemens standard components as available. Standard equipment dimensions and enclosure constructionmay not apply when certain modifications and special features are added.Catalog Number Suffixes indicate numbers or letters added to the end of a catalog number. Example: 14DSE32BA becomes 14DSE32BAA1.Pilot DevicesEnclosureDescription Modification Class Type Suffix List Price $Start, Stop 14, 17, 18, 36, 37, 40, 83, 84, CLM, CM, LE All A1 200. Forward, Reverse, Stop 22, 25, 26, 43 All Push Buttons High, Low , Stop 30, 32 AllA2 360.E-Stop 14 , 17, 18, 22 , 25, 26, 30 , 32, 36, 37, 40 , 43 All ES 271.Test Push Buttons 83, 84 All K1 200.Hand-Off-Auto14, 17, 18, 36, 37, 40, 83, 84, LE All A3 200. CM, CLM All A3 780.For 24 volt HOA control,20 Amp contactor onlyCM, CLM 1 EM 736.Off-On14, 17,18, 22, 25, 26, 30, 32, 36, 37, 40, 43,83, 84, CLM, CM, LEAll A4 200. Selector Switches Auto-Off 14, 17, 18, 40, 83, 84, CM, CLM, LE All A6 200. Forward-Off-Reverse 22, 25, 26, 43 AllHigh-Off-Low 30, 32 AllA5 200.Hand-Off-Auto (Keyed) 14, 17, 18, 36, 37, 40, 83, 84, LE, CLM, CM All A9 601. Auto-Off-Low-High 30, 32 All A0 227.16CONTROLPRODUCTSPilot LightsLens Red Green GreenColor ➔ Red Green Red Green Red Green Amber White Push-To-Test Push To-Test Push To-TestOn On Control On OnFor/Rev For/Rev OL Power For/Rev For/RevLegend➔ Low/High Low/High Run Run Off Off Tripped On Low/High Low/High OffClass Enclosure Type Suffix ➔ FA FB FC FD FJ FK FL FW FS FT FU 14, 40, 17, 18, 36, 37, 87,88, LE, CLM, CM All 215. 215. 215. 215. 315. 315. 315. 215. 273. 273. 375.22, 25, 26, 30, 32, 43, 83, 84 All 429. 429. 409. 409. 315. 315. 315. 215. 548. 548. 375.NEMA & GeneralPurpose ControlCoil OptionsClass 14, 17, 18, 22, 25, 26, 30, 32, 40, 43, 83 , 84 , 87, 88Controller Size — List Price $Coil LetterVolts 60 HZ Volts 50 HZ Change 00–2 1 ⁄2 3, 3 1 ⁄2 424 Separate Control 24 J120 Separate Control 110 F110–120/220–240 110/190–220 A200–208 — D220–240 190–220 G NC NC NC277 240 L220–240/440–480 190–220/380–440 C440–480 380–440 H575–600 550 E24VS DC Coil 48V U125VV156. 302. 402.250VWCoil Letter Controller Size 4 (Vacuum Only)AC (50–60 HZ) or DC Change Size 5 & 6 (ALL)23–26V J42–48V U110–127V F200–220V D220–240V G NC240–277V L380–420V K440–480V H575–600V EMiscellenious OptionsOmit Alternator(deduct)Duplex with SeparateRelay AlternationDuplex with lead pumptransfer switchChange the ListClass 92 to Price $83, 84 95 222.83, 84 93 NC83, 84 94 NC Not Available on Class 14, 40, 22, 43, 30 (size 00–4) andClass LE, CLM (20–30amp) NEMA 1 clamshell enclosures. DC coils include 1 NC, late break aux. contact. This aux.contact takes up one side of the starter (00–4 only). Price x 2 for Classes 22, 25, 26, 30, 32, 43, 83, 84. Bimetal OL - Size 00 - 2 1/2 available. Solid-state OL -Size 00 - 4, 7 & 8 available. For Class 83, 84 two devices are provided. Price x 2. For Class 83, 84 standard enclosure (92) alternatingrelay available in 24V or 120V control only. S coil is not available for size 4 contactors or starters. Class 83 and 84 only.16-94Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Factory ModificationsOrdering InformationReplace (*) with letter from Transformer Table.Prices shown are additions to standard equipment prices as listed in the catalog and are not to be used asseparate selling prices. All modifications will consist of Siemens standard components as available. Standardequipment dimensions and enclosure construction may not apply when certain modifications and specialfeatures are added.Catalog Number Suffixes indicate numbers or letters added to the end of a catalog number.Example: 14DSE32BA becomes 14DSE32BABB.SelectionTransformer TablePrimary SecondaryVolts Volts Letter120 24 B208 24 S208 120 T240 24 J240 120 F277 24 N277 120 P380 110 U415 100 W480 240 R480/240 24 D480/240 120 A600 24 E600 120 CControl Power TransformersCatalog Product Enclosure20–60 100 — 200 300–400 — —Description No Suffix Class Type 0–2 1 ⁄2 3 3 1 ⁄2, 4 5 6 7 8Standard Capacity 14, 17, 18, 22, 25, 26, 30, 1, 3, 4, 12 247. — — — — — —B*with 1-Secondary Fuse 32, 40, 43, 83 , 84 , 87 7 & 9 284. — — — — — —Standard Capacity 14, 17, 18, 22, 25, 26, 30,1, 3, 4, 12 447. 712. 712. 822. 822. 905. 905.with 2-Primary and D* 32, 40, 43, 83 , 84 , 87,1-Secondary FuseLE, CLM, CM7 & 9 484. 753. 753. 868. 868. 1050. 1050.100VA Extra Capacity 14, 17, 18, 22, 25, 26, 30, 32, 40, 1, 3, 4, 12 636. 913. 913. 1004. 1004. 1095. 1095.with 2-Primary and43, 83C*, 84 , 87, LE, CLM, CM 7 & 9 675. 1068. 1068. 1233. 1233. 1373. 1373.1-Secondary Fuse 36, 37, 88 All 831. 1082. 1082. 1197. 1197. — —150VA Extra Capacity 14, 17, 18, 22, 25, 26, 30, 32, 40,with 2-Primary and C*1 43, 83 , 84 , 87, LE, CLM, CM1, 3, 4, 12 795. 1088. 1088. 1179. 1179. 1179. 1179.1-Secondary Fuse 36, 37, 88 All 986. 1288. 1288. 1361. 1361. — —Lighting & Heating Ratings (Amps)Motor Controller SizeFactory Assembled Fuse Clips—Class 25, 32, 84 FuseRejectionClip Amps Volts Clip Suffix List Price $30 250 10 27.30 600 11 47.60 250 12 47.60 600 13 65.100 250 14 146.100 600 15 146.200 250 16 329.200 600 17 329.400 250 18 675.400 600 19 675.600 250 20 969.600 600 21 969.800 600 23 2180.1600 600 25 5449.16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Factory will furnish the same voltage coils astransformer secondary voltage (except with class36,37). The standard control transformer supplied for startersizes 0 through 2 1 ⁄2 will be rated 45VA and have theappropriate secondary fuse. Primary fuses will not besupplied as standard. For primary fuse option selectappropriate suffix from table. For ESP100 styles add the rejection clip suffix to theend of the base style catalog number. For thermalstyles add the rejection clip suffix immediately beforethe 81 in the part number. For Class J fuse clips, add suffix ”DJ”. Class 84 Duplex Controllers require two fusibledisconnects thus multiply the price adder by two. Price x 2 Class 83 and 84.Discount Schedule NEMA Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-95

Factory ModificationsSelectionOrdering InformationPrices shown are additions to standard equipment prices as listed in the catalog and are not to be used as separate selling prices. All modifications willconsist of Siemens standard components as available. Standard equipment dimensions and enclosure construction may not apply when certain modificationsand special features are added.Catalog Number Suffixes indicate numbers or letters added to the end of a catalog number. Example: 14DSE32BA becomes 14DSE32BAGO1.16CONTROLPRODUCTSNEMA & GeneralPurpose ControlAdditional Auxiliary ContactsController Size — List Price $NO NC Catalog NumberClass Contacts Contacts Suffix 00–1 3 ⁄4 2–4 5–6 7–8— 1 G01 102. 102. — —— 2 G02 201. 201. 201. —1 — G10 102. 102. — —1 1 G11 201. 201. 201. 201.1 2 G12 303. 303. — —2 — G20 201. 201. 201. —2 1 G21 303. 303. — —2 2 G22 403. 403. 403. —2 3 G23 505. 505. — —3 1 G31 403. 403. 403. —3 2 G32 505. 505. — —14, 17, 18, 40, 83 , 84 3 3 G33 604. — — —4 — G40 403. 403. 403. —4 1 G41 505. 505. — —4 2 G42 604. — — —4 4 G44 806. — — —5 — G50 505. 505. — —5 1 G51 604. — — —5 3 G53 806. — — —6 — G60 604. — — —6 2 G62 806. — — —7 1 G71 806. — — —8 — G80 806. — — —— 2 G02 201. 201. — —2 — G20 201. 201. — —2 2 G22 403. 403. 403. —22, 25, 26, 43 & 4 0 G40 403. 403. 403. —30, 32 (2-winding) 4 4 G44 806. 806. — —6 2 G62 806. 806. — —8 0 G80 806. 806. — —0 2 G02 — 201. — —2 — G20 — 201. — —2 2 G22 403. 403. — —30, 32 4 — G40 403. 403. — —(1-winding) 4 4 G44 — 806. — —6 2 G62 — 806. — —8 — G80 — 806. — —LE, CLM, CM 1 1 G11 201. — — —CLM, CM 0 2 G02 201. — — —2 0 G20 201. — — —2 2 G22 201. — — —Overload OptionsClass 14, 17, 18, 22, 25, 26, 30, 32, 36, 37TripCatalog NumberController Size—List Price $Description Class Phase Contacts Suffix 00–2 1 ⁄2 3–4 5, 6AmbientClass 10 or 20 3-Phase or NO & NC, SPDT 91 54. — —Compensated(K or E heaters) Single PhaseBimetalNC 81 NC — —ESP100 or Class 10NC 51 NC NC NC3-Phase3RB20 (Sz 5-6) Class 30 NC 53 NC NC — Auxiliary contacts will be added evenly acrosscontactors. (i.e. Class 22, G02 suffix will add 2 NCcontacts (one per contactor). Double the price addition for Class 30 and 32. For class 83 and 84 contacts will be added to bothstarters. Price x 2.16-96Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Factory ModificationsSelectionOrdering InformationPrices shown are additions to standard equipment prices as listed in the catalog and are not to be used as separate selling prices.All modifications will consist of Siemens standard components as available. Standard equipment dimensions and enclosure constructionmay not apply when certain modifications and special features are added.Catalog Number Suffixes indicate numbers or letters added to the end of a catalog number. Example: 14DSE32BA becomes 14DSE32BAA1.Control OptionsEnclosure Catalog Number ListDescription Class Type Suffix Price $Lighting Control Modules CLM 20 Amp All 2W, 3W, 3WS 466. 725. 765.Surge Suppression for 120V AC Coil 14, 17, 18, 22, 25, 26, 30, 32, 36, 37, 83, 84, 87, 88 All SS 82.Disconnect Switch Interlock 2 NO/2 NC DPDT 17, 25, 32, 37, CM, LE 1, 3, 4, 4X, 12 GY 134.Motor CircuitProtector InterlockNO/NC SPDT 18, 26, 32, 37, CM, LE All GY 264.Lightning Arrestor All All L 365.Circuit Breaker Shunt Trip 18, 26, 32, 37, 84, 87, 88, CM, LE All L6 753.Circuit Breaker Undervoltage Trip 18, 26, 32, 37, 84, 87, 88, CM, LE All L7 753.Circuit Breaker Alarm Switch Trip 18, 26, 32, 37, 84, 87, 88, CM, LE All L8 753.NO alarm aux contact for ESP OL 14, 17, 18, 22, 25, 26, 30, 32, 36, 37, 83, 84, 87, 88 All L9 50.Ground Lug – 1 Conductor All All L10 73.Control Circuit Fuse and HolderF1 (1 fuse) 200.AllAll(Transformer Primary Fusing) F2 (2 fuses) 200.Control Circuit Circuit BreakerInternally OperatedAll All F4 795.Space Heater (120V separate control) All All SH 639.Space Heater with Thermostat (120V separate control) All All ST 686.Surge Capacitor 87, 88 All SC 439.Alarm Package (includes horn, light, relay & push-button) 83, 84, 87, 88 All M7 1371.Backspin Protection 87, 88 All T5 712.Minimum Run Timer 0.2 sec. - 3 mins. 87, 88 All T6 712.Blown Fuse Indicator Light 17, 25, 32, 37, 84, 87, 88, CM, LE All L11 456.Single Phase 120VAC Combination Starter 17, 18 All Z1 NCSingle Phase 240VAC Combination Starter 17, 18 All Z1 NCReversing OptionsController Size —List Price $Catalog NumberDescription Class Suffix 0 1 1 3 ⁄4 2 2 1 ⁄2 3 3 1 ⁄2 4 5Reversing in one speed only 2 speed 1 winding R6 1033. 1095. 1335. 1571. 1940. 2281. 2620. 3081. —Reversing in one speed only 2 speed 2 windingR7 1000. 1137. 1361. 1602. 2003. 2356. 2702. 3181. —30, 32Reversing in both speeds 2 speed 1 winding R8 1395. 1607. 2158. 2539. 3213. 3780. 4983. 5862. —Reversing in both speeds 2 speed 2 winding R9 1551. 1772. 2518. 2962. 3618. 3617. 4937. 5809. —Reversing for Reduced Voltage 36, 37 R 1240. 1314. 1314. 3597. 3597. 8237. 8237. 8237. 9844.Enclosure Options Class 36, 37Change the 8thController Size — List Price $EnclosureCharacter of theClass Type Catalog Number to: 0–1 3 ⁄4 2, 2 1 ⁄2 3 3 1 ⁄2, 4 5 636 NEMA 12/3R N 913. 1142. 1371. 1826. 2466. 3425.37 NEMA 4 (Painted) E 1095. 1233. 1781. 2804. 5205. 6850.37 NEMA 4 (Stainless Steel) W 1314. 1479. 2137. 3363. — —16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlEnclosure Options Class 14, 17, 18Change the 7thChange the 8thCharacter of the Character of the Controller Size – List Price Adder $Enclosure Catalog Number with Catalog Number withClass Type Bimetal OL to: ESP OL to: 00–1 3/4 2–2 1/2 3 3 1/2–4 5–814 NEMA 4/4X (316 Stainless Steel) X X 50. 165. 165. 165. —14 (Extra Wide) NEMA 4/4X (316 Stainless Steel) X X 87. 87. 189. 189. —17 & 18 NEMA 4/4X (316 Stainless Steel) X X 272. 272. 272. 390. —Note: Add price to the standard 304 stainless steel unit price. Supplied as NEMA 12, field convertible to NEMA 3R. For bimetal OL, order cat. no. with ”91” suffix. Specify the single phase voltage when ordering. Surge Suppression for NEMA sizes 5 – 8 are suppliedinternal with the coil.Discount Schedule NEMA Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-97

Factory ModificationsDimensionsOrdering InformationPrices shown are additions to standard equipment prices as listed in the catalog and are not to be used as separate selling prices.All modifications will consist of Siemens standard components as available. Standard equipment dimensions and enclosure constructionmay not apply when certain modifications and special features are added.Catalog Number Suffixes indicate numbers or letters added to the end of a catalog number. Example: 14DSE32BA becomes 14DSE32BAR40.Control RelaysEnclosureListDescription Class Type Suffix Price $Control Relay 4 NO R402 NO/2 NC All 1, 3, 4, 7, 9, 12 R224-Poles Max4 NC R041077.Under Voltage, Phase Failure, Phase Sequence, Phase Unbalance (460V)R1 Under Voltage, Phase Failure, Phase Sequence, Phase Unbalance (230V)R21, 3, 4, 7 & 9, 12Under Voltage, Phase Failure, Phase Sequence, Phase Unbalance (575V)R4 1007.Ground Fault Relay R5 536.Electronic On Delay Relay (.15s–100h) 24V/120V All T1Electronic On Delay Relay (.15s–100h) 24V/240V T2Electronic Off Delay Relay (.15s–100s) 120V 1, 3, 4, 7, 9, 12T31004.Electronic Off Delay Relay (.15s–100s) 240V T424 hour time clock T724 hour time clock with day omission LE, CLM, CM All T8 1004.7 day time clock T9Compelling Relay A6 602.Acceleration Control 30, 32 1, 4, 12 A7Deceleration ControlA81371.Meters—Mounted on Enclosure16CONTROLPRODUCTSNEMA & GeneralPurpose ControlEnclosureList Description Class Type Suffix Price $Ammeter (includes a C.T. if necessary) M1 1807.Ammeter and Switch (3-Phase with 3 C.T.’s)14 , 17, 18, 22 M2 2739.,Voltmeter25, 26, 36, 37, 40 1, 12 M3 1807.,Voltmeter and Switch (3-Phase)43 M4 2739., 83, 84Elapsed Time Meter M5 530.Wattmeter M6 3706.Function Identification PlatesDescription Class Suffix List Price $Function identification plate, with marking as specified All N1 89.Terminal Blocks Description Class Suffix List Price $3 Point Terminal TC3 219.6 Point Terminal All TC6 439.9 Point Terminal TC9 658.Special RatingsDescription Class Suffix List Price $Service Entrance Rating17, 18, 25, 26, 32,37, 84, 87N3 237. Supplied mounted and unwired. Not available on Class 36, 37. Price x 2 Class 83 and 84. ETM available with 120V coil only. For terminal point more than 9 terminals useadditional suffixes. Max 3 suffixes can be selected. Available 3-Phase only.16-98Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Manual ControlClass SMF, MMSClass SMF and MMS Open TypeNEMA Type 3R, 4 and 12Dimensions(Top and Bottom)Class SMFTypes FO–1, 1P, 2, 2P(with toggle operator)Class MMSTypes KO–1, 1A, 1B, 2, 2B, 2C(with toggle operator)NEMA Type 1B General Purpose Flush MountingDevice Class TypeFractional HP StarterMotor Starting SwitchSMFMMSFWN1, 1P, FWN2, 2PFWN3, 3P, FW4, 4PKWN1, 1A, 1B, KWN2, 2B, 2CKWN3, 3A, 3B, KWN4, 4B, 4CNEMA Type 4 Watertight Die Cast Zinc EnclosureType ofDimensions in Inches (mm)Device Operator Type A B CClass SMFFractionalHP StarterClassMMSMotorStartingSwitchToggleKeyToggleKeyFF1, 1P, 2, 2P 1.44 2.75 4.50FS1, 1P, 2, 2P (37) (70) (114)FSJ1P, 2P1.44 3.50 5.25(37) (89) (133)FF3, 3P, 4, 4P 1.44 2.75 4.50FS3, 3P, 4, 4P (37) (70) (114)FSJ3P, 4P1.44 3.50 5.25(37) (89) (133)KF1, 1A, 1B, 2, 2B, 2C 1.75 2.75 4.50KS1, 1A, 1B, 2, 2B, 2C (44) (70) (114)KSJ1A, 1B, 2B, 2C1.75 3.50 5.25(44) (89) (133)KF3, 3A, 3B, 4, 4B, 4C 1.75 2.75 4.50KS3, 3A, 3B, 4, 4B, 4C (44) (70) (114)KSJ3A, 3B, 4B, 4C1.75 3.50 5.25(44) (89) (133)NEMA Type 1 General Purpose Surface Mounting EnclosuresDimensions in Inches (mm)A B C D E F G H I3.00 2.75 1.13 0.25 3.75 4.69 4.25 4.56 0.78(76) (70) (28) (6) (95) (119) (108) (116) (20)Device Class TypeFractional HP Starter SMF FW1, 1P, 2, 2PMotor Starting Switch MMS KW1, 1A, 1B, 2, 2B, 2C16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlStandard Size—Class SMF and MMSTypes FG & KG (Single-Unit)Oversized—Class SMF and MMSTypes FGJ & KGJ (Single-Unit)Jumbo MMSKE21 ⁄2– 3 ⁄4 Knock-Out On Back and SidesNote: Dimensions for reference, not for construction.Dimensions are in inches (mm). Dimensions typical for key operator devices.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-99

Manual ControlClass SMF, MMSNEMA Type 7 and 9 Cast Aluminum EnclosureDimensionsDimensions in Inches (mm)A B C D G H4.00 5.75 1.38 6.36 4.38 1.20(101) (146) (35) (161) (111) (30)Device Class TypeFractional HP Starter SMF FR1, FR2Motor Starting Switch MMS KR1, KR2NEMA Type 1 General Purpose Enclosure For Two Unit DevicesType ofDevice Operator Class TypeOne StarterToggle SMF FG02, 02PKey SMF FG04PTwo StartersToggle SMF FG222, 222PKey SMF FG44POne Starter and Toggle SMF FG71, 71P, 72, 72POne Sel. Switch Key SMF FG74PReversing Switch Toggle MRSKG11, 11A, 11B, 22, 22A,22B, 22CTwo Speed Starter Toggle SMF FG11, 11P, 22, 22PTwo Speed Switch Toggle MMS KG11, 11A, 11B, 22, 22B, 22CCONTROLPRODUCTS16NEMA & GeneralPurpose ControlNEMA Type 1B General Purpose Flush Mounting For Two Unit DevicesType ofDevice Operator Class Type A B C D5.25 3.75 5.25 1.44FF22, 22P(133) (95) (133) (37)Toggle SMF4.56 3.50 4.50 1.44FS22PTwo (116) (89) (114) (37)Starters5.25 3.75 5.25 1.44FF44P(133) (95) (133) (37)Key SMF4.56 3.50 4.50 1.44FS44P(116) (89) (114) (37)5.25 0.75 5.25 2.00FF71, 71P, 72, 72P(133) (19) (133) (51)One Toggle SMF4.56 3.50 4.50 2.00StarterFS71P, 72P(116) (89) (114) (51)and OneSelector5.25 3.75 5.25 2.00FF74PSwitch (133) (95) (133) (51)Key SMF4.56 3.50 4.50 2.00FS74P(116) (89) (114) (51)KF11, 11A, 11BReversing5.25 3.75 5.25 1.75Toggle MRS KF22, 22ASwitch(133) (95) (133) (44)22B, 22CTwo5.25 3.75 5.25 1.44Speed Toggle SMF FF11, 11P, 22, 22P(133) (95) (133) (37)SwitchTwoKF11, 11A, 11B 5.25 3.75 5.25 1.44Speed Toggle MMS22, 22B, 22C (133) (95) (133) (37)SwitchNote: Dimensions for reference, not for construction.Dimensions are in inches (mm). Selector switch is on the left, increases overall depthto 3.50 in. (89 mm). Only one pilot light (located on right) is used on MRSswitches. Dimensions include factory wired power connections. Selector switch is on the left, extends 1.62 in. (41 mm)from mounting surface.16-100Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Manual ControlClass 11 - 3RV3RV102DimensionsClass 11 - NEMA 1 EnclosureClass 11 - NEMA 7 & 9, 3 & 4, and NEMA 7 & 9Enclosure1/2 NPT1/2 - 3/4 NPT3/4 - 1 NPT1/2 - 3/4 NPT1/2 - 3/4 NPT1/2 - 3/4 NPT3/4 NPT3/8 Mounting Screw16 CONTROLPRODUCTS1/2 - 3/4 NPT1/4 Mounting ScrewTyp. (3) Places10.208.634.636.391/2 - 3/4 NPT9.889.198.506.066.387.50NEMA & GeneralPurpose Control5.053/4 NPT6.975.811/2 - 3/4 NPT3/4 - 1 NPT.50Note: Dimensions in inches (millimeters). Dimensionsfor reference, not for construction. Contact SalesOffice for dimensions not listed.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-101

Heavy Duty Motor StartersSolid State Overload, Class 14DimensionsFigure 1Figure 2B1CC1D2.50B1BCC1D2.50 BLLADEJADJELLRESETMM1E1D1GMM1LLKE1D1B2GFigure 3Figure 4 Figure 5CC1D2B1BCC1.50B1BE2D21L3LAJDADJT1T2T3LLMM1GKE1D1MM1GKD1E1CONTROLPRODUCTSNEMA & GeneralPurpose Control16Open Type Solid State OverloadMountingOutline Dimensions Mounting Dimensions Screw Reset DimensionsSize Figure A B B1 B2 C C1 D D1 D2 E E1 E2 G J K L M M100–1 3 ⁄4 1 7.44 3.50 5.75 — 3.75 3.50 6.50 2.00 0.19 6.27 1.00 — #10 5.55 — 0.26 3.06 3.22(189) (89) (146) (95) (89) (165) (51) (5) (159) (25) (141) (7) (78) (82)2–2 1 ⁄2 2 8.13 3.50 5.75 4.60 4.00 3.77 7.62 2.00 0.19 — 1.00 — #10 6.67 0.60 0.26 3.28 3.49(207) (89) (146) (117) (102) (96) (194) (51) (5) (25) (169) (15) (7) (83) (88)3–3 1 ⁄2 3 9.78 4.50 6.75 — 4.66 5.19 9.22 1.44 0.28 — 0.72 — 0.25 8.22 0.60 0.26 3.44 3.64(248) (114) (171) (118) (132) (234) (37) (7) (18) (6) (209) (15) (7) (87) (92)4 4 11.06 4.50 6.75 — 4.66 5.75 10.34 1.44 0.44 — 0.72 0.72 0.25 9.16 0.72 0.26 3.44 3.64(281) (114) (171) (118) (146) (263) (37) (11) (18) (18) (6) (233) (18) (7) (87) (92)5 5 12.76 5.71 6.89 — 8.54 — 7.09 4.72 — — — — 0.35 — — — — —(324) (145) (175) (217) (180) (120) (9)6 5 13.03 6.30 7.48 — 9.29 — 7.09 5.12 — — — — 0.35 — — — — —(331) (160) (190) (236) (180) (130) (9)Note: Dimensions in inches (millimeters). Dimensionsfor reference, not for construction. Contact SalesOffice for dimensions not listed.16-102Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Heavy Duty Motor Starters & ContactorsAmbient Compensated Bimetal Class 14DimensionsFigure 1Figure 2C1 CD2.50B1BCC1D2B1B .50LCCLAJDAJL3 PHASESINGLE PHASELDK3 PHASESINGLE PHASEM1MGEM1MGED1Figure 3 Figure 4.50BB1D2CC1CC1D2.50B1BE1LCR E S E TJDALALDJ16 CONTROLPRODUCTSR E SETGED1B2Open Type Ambient Compensated Bimetal OverloadM1MM1MED1B2GNEMA & GeneralPurpose ControlMountingOutline Dimensions Mounting Dimensions Screw Reset DimensionsSize Figure A B B1 C C1 D D1 D2 E E1 G J K L M M100–1 3 ⁄4 1 7.45 3.50 5.75 3.89 3.50 6.50 — 0.19 1.00 — #10 5.39 — 0.16 2.97 2.81(189) (89) (146) (99) (89) (165) (4.8) (25) (137) (4) (75) (71)2–2 1 ⁄2 2 8.38 3.50 5.75 4.00 3.77 7.75 2.00 0.19 1.00 — #10 6.28 0.36 0.16 3.22 3.06(213) (89) (146) (102) (96) (197) (51) (4.8) (25) (160) (9) (4) (82) (78)3–3 1 ⁄2 3 10.66 4.50 6.75 5.06 4.66 9.25 1.44 0.28 0.72 — 0.25 7.81 — 0.12 3.39 3.27(271) (114) (171) (129) (118) (235) (37) (7) (18) (6) (198) (3) (86) (83)4 4 12.02 4.50 6.75 5.75 4.66 10.34 1.44 0.44 0.72 0.72 0.25 8.78 — 0.12 3.63 3.51(305) (114) (171) (146) (118) (263) (37) (11) (18) (18) (6) (223) (3) (92) (89)Note: Dimensions in inches (millimeters). Dimensionsfor reference, not for construction. Contact SalesOffice for dimensions not listed.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-103

Reversing & Multispeed Heavy Duty StartersSolid State Overload Class 22, 30DimensionsFigure 1Figure 2Figure 3D1B1BCC1D1.50B1BCC1D1B1BCC1DJADJALJDAALLKK1EB2GM1MKK1ECLB2GM1MKK1EGLM1MD1B1BEFigure 4CC1B1EFigure 5D1CC1DJAJADLKK1GLM1MKK1BGM1MFigure 6Figure 716B1ED1CC1B1ED1CC1CONTROLPRODUCTSJD AJ-1L3DALLKK1BGM1MKK1BGM1MNEMA & GeneralPurpose ControlClass 22 Reversing & Class 30 2 Speed/2 WindingMountingOutline Dimensions Mounting Dimensions Screw Reset DimensionsSize Figure A B B1 B2 C C1 D D1 E G J K K1 L M M100–1 3 ⁄4 1 7.69 8.25 10.50 3.62 3.61 3.92 7.25 0.22 7.25 #10 5.77 1.25 4.75 0.26 3.40 3.232–2 1 ⁄2 2 8.94 8.25 10.50 3.62 4.17 3.98 8.50 0.22 7.25 #10 6.89 0.65 4.75 0.26 3.66 3.453– 3 1 ⁄2 3 11.44 10.94 12.75 — 5.65 5.03 10.75 0.34 10.25 #10 8.97 1.53 6.00 0.26 4.12 3.914 4 11.91 10.94 12.75 — 6.22 5.11 11.22 0.34 10.25 0.25 9.32 1.53 6.00 0.21 4.12 3.91Class 30 2 Speed/1 WindingMountingOutline Dimensions Mounting Dimensions Screw Reset DimensionsSize Figure A B B1 B2 C C1 D D1 E G J K K1 L M M100–1 3 ⁄4 1 7.69 8.25 10.50 3.62 3.61 3.92 7.25 0.22 7.25 #10 5.77 1.25 4.75 0.26 3.40 3.232–2 1 ⁄2 5 9.19 14.55 16.30 — 3.94 3.85 8.75 0.22 13.00 #10 7.14 0.65 5.75 0.26 3.50 3.293–3 1 ⁄2 6 11.44 16.94 18.75 — 5.65 5.07 10.75 0.34 16.25 #10 8.97 1.53 6.00 0.26 3.66 3.454 7 11.91 16.94 18.75 — 6.22 5.12 10.75 0.82 16.25 #10 8.87 1.53 6.00 0.26 3.66 3.45Note: Dimensions for reference, not for construction.Contact sales office for dimensions not listed.Dimensions are in inches (mm).16-104Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

NCRESETX2T2MANTRNCRESETX22TMANTRIPIIReversing & Multispeed Heavy Duty StartersAmbient Compensated Bimetal Overload Class 22, 30Figure 1aFigure 1bDimensions.50B1BC L.50D1CC1.50B1BC L.50D1CC1C LC LC LC LJJADADNCRESETX 2MANTRP INCRESETX 2MANTRPLNCRESETX 2MANTRP INCRESETX 2MANTRPLT12T 1T2T 3T1T2T 3FigureT 1T2T 3KK1EB2GTHIS OVERLOADUSED ONMULTISPEEDSTARTERS ONLYM1MKK1EB2GTHIS OVERLOADUSED ONMULTISPEEDSTARTERS ONLYM1MT T 3RE TFigure 2Figure 3B1BED1CC1B1BED1CC1.50LLADJJDALR E S E TR E S E TS ERESE TLKK1GM1MKK1GM M1.50Figure 4B1BC LC LC LD1CC1LBB1L5D1CC116 CONTROLPRODUCTSJAJDAT 1KT 3PIK1T 1ET 3Class 22 Reversing & Class 30 2 Speed/2 Winding with Bimetal OverloadGDLM1MMountingMountingOutline Dimensions Screw Dimensions Reset DimensionsSize Figure A B B1 B2 C C1 D D1 E G J K K1 L M M100–1 3 ⁄4 1a 7.69 8.25 10.50 3.62 3.92 3.61 7.25 0.22 7.25 #10 5.60 1.25 4.75 0.16 3.12 3.072–2 1 ⁄2 1b 8.94 8.25 10.50 3.62 4.17 3.98 8.50 0.22 7.25 #10 6.46 0.79 4.75 0.16 3.10 3.053–3 1 ⁄2 2 11.44 10.94 12.94 — 5.66 5.08 10.75 0.34 10.25 #10 8.56 2.12 6.00 0.12 3.83 3.714 3 12.50 10.94 12.75 — 6.22 5.16 11.22 0.34 10.25 0.25 9.11 2.12 6.00 0.12 4.09 3.97KR E S E TK1R E S E TEGLM1MNEMA & GeneralPurpose ControlClass 30 2 Speed/1 Winding with Bimetal OverloadMountingMountingOutline Dimensions Screw Dimensions Reset DimensionsSize Figure A B B1 B2 C C1 D D1 E G J K K1 L M M100–1 3 ⁄4 1a 7.69 8.25 10.50 3.62 3.92 3.61 7.25 0.22 7.25 #10 5.60 1.25 4.75 0.16 3.12 3.072–2 1 ⁄2 4 9.19 14.56 16.25 — 4.11 3.92 8.75 0.22 13.00 0.25 6.71 0.78 5.75 0.16 3.10 3.053–3 1 ⁄2 5 11.44 16.94 18.75 — 5.66 5.08 10.75 0.34 16.25 0.25 8.56 2.12 6.00 0.12 3.83 3.71Note: Dimensions for reference, not for construction.Contact sales office for dimensions not listed.Dimensions are in inches (mm).Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-105

Heavy Duty ContactorsClass 40Full Voltage Open Type NEMA Contactor Size 00-8DimensionsFigure 1Figure 2Figure 3NEMA & GeneralPurpose Control16CONTROLPRODUCTSFigure 4Open TypeMountingMounting3rd Character Outline Dimensions Dimensions ScrewSize of Catalog No. Fig A B B1 B2 C D D1 E G00–1 3 ⁄4 C, D, E 1 4.31 (110) 3.94 (100) 4.25 (108) 4.75 (121) 3.75 (70) 3.94 (100) 0.19 (5) 1.00 (25) #102–2 1 ⁄2 F,G 1 4.88 (124) 3.94 (100) 4.25 (108) — 4.00 (102) 4.50 (114) 0.19 (5) 1.00 (25) #103–3 1 ⁄2 H, I 1 6.13 (156) 5.13 (130) 5.50 (140) — 5.06 (129) 5.63 (143) 0.25 (6) 0.75 (19) 0.25 (6)4 J 1 7.81 (198) 5.19 (132) 5.50 (140) — 5.75 (146) 6.56 (167) 0.81 (21) 0.75 (19) 0.5 (13)5 L 2 8.27 (210) 5.71 (145) 6.89 (175) — 8.54 (217) 7.09 (180) 4.72 (120) — 0.35 (9)6 M 2 8.43 (214) 6.3 (160) 7.48 (190) — 9.29 (236) 7.09 (180) 5.12 (130) — 0.35 (9)7 N 3 14.05 (357) 8.27 (210) — — 9.53 (242) 9.80 (249) 2.83 (72) — 0.25 (6)8 P 4 15.41 (392) 17.23 (438) — — 10.56 (268) 12.28 (312) — 5.35 (136) 0.35 (9)Note: Dimensions for reference, not for construction.Contact sales office for dimensions not listed.Dimensions are in inches (mm).16-106 3rd character of catalog number identifies contactorrating.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Magnetic Reversing ContactorsClass 43DimensionsFigure 1Figure 216 CONTROLPRODUCTSOpen Type Horizontal MountedMountingMouningOutline Dimensions Dimensions ScrewSize Fig. A B B1 C C1 D D1 E F G00–1 3 ⁄4 1 7.69 (195) 7.75 (197) 9.25 (235) 3.88 (98) — 7.25 (184) 0.25 (6) 3.63 (92) — #102, 2 1 ⁄2 1 8.94 (227) 7.75 (197) 9.25 (235) 4.56 (116) — 8.5 (216) 0.25 (6) 3.63 (92) — #103–3 1 ⁄2 1 11.44 (291) 10.94 (278) 11.50 (292) 5.19 (132) — 10.75 (273) 0.38 (6) 5.13 (130) — 0.254 1 8.50 (216) 10.94 (278) 11.50 (292) 6.25 (159) — 7.81 (198) 0.38 (6) 5.13 (130) — 0.255 2 18.07 (459) 14.20 (361) — 9.44 (240) — 17.20 (437) — 9.61 (244) —6 2 11.61 (295) 18.88 (480) 9.45 (240) 10.85 (276) 7.44 (189) 10.44 (265) 10.71 (272) 17.72 (450) 1.18 (30) —NEMA & GeneralPurpose ControlNote: Dimensions for reference, not for construction.Contact sales office for dimensions not listed.Dimensions are in inches (mm).Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-107

Overload Relays & Current Sensitive RelaysSolid State OverloadDimensions “A” Frame—ESP100 Solid State OverloadOverload (55 - 630 Amps), SIRIUS 3RB20DimensionsDimensions “A1” Frame—ESP100 Solid State OverloadESP100 OverloadMotor Lead Windows16Dimensions “B” Frame—ESP100 Solid State OverloadCONTROLPRODUCTSESP100 OverloadMotor Lead WindowsNEMA & GeneralPurpose ControlCurrent Sensitive RelayFree StandingMounting PanelSizes 2–4Note: Dimensions for reference, not for construction.Dimensions in inches.16-108Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Overload RelaysPanel Mounted Class 48 — BimetalDimensionsFigure 1 Figure 2 Figure 3Figure 4Figure 5 Figure 6Figure 7 Figure 816 CONTROLPRODUCTSMounting ResetMounting Max ApproxOutline Dimensions Dimensions DimensionsAmpScrew Wire Ship Wt RefDescription Rating Fig A B C D E J K L G Size Lbs (Kg) Dwg1-Pole 25 1 3 1 ⁄2 (89) 7 ⁄8 (22) 3 3 ⁄16 (81) 3 (76) 1 ⁄2 (13) 1 3 ⁄4 (44) 3 ⁄4 (19) 1 ⁄8 (3) #10 8 2 (1) D51820Bimetal 60 2 4 7 ⁄8 (124) 7 ⁄8 (22) 3 3 ⁄16 (81) 3 (76) 1 ⁄2 (13) 2 7 ⁄163 ⁄4 (19) 1 ⁄8 (3) #10 1 2 (1) D51830Ambient 100 3 4 7 ⁄8 (124) 1 1 ⁄4 (32) 3 9 ⁄16 (90) 3 1 ⁄2 (89) 9 ⁄16 (14) 2 7 ⁄161 ⁄2 (13) 1 ⁄8 (3) #10 00 3 (1) D51833Compensated 180 4 5 15 ⁄16 (151) 1 1 ⁄4 (32) 3 9 ⁄16 (90) 3 1 ⁄2 (89) 9 ⁄16 (14) 3 (76) 1 ⁄2 (13) 1 ⁄8 (3) #10 250 MCM 4 (2) D52206NEMA & GeneralPurpose ControlMounting ResetMtg Max ApproxOutline Dimensions Dimensions DimensionsAmpScrew Wire Ship Wt RefDescription Rating Fig A B C D E J K K1 K2 L G Size Lbs (Kg) Dwg3-Pole 30 5 3 5 ⁄8 (92) 3 1 ⁄16 (78) 3 1 ⁄8 (79) 3 (76) 1 1 ⁄2 (38) 1 1 ⁄4 (32) 1 13 ⁄16 (46) — — 3 ⁄16 (5) #10 8 3 (1) D54791Bimetal 60 6 3 7 ⁄8 (98) 3 1 ⁄16 (78) 3 1 ⁄8 (79) 3 (76) 1 1 ⁄2 (38) 1 1 ⁄4 (32) 1 13 ⁄16 (46) — — 3 ⁄16 (5) #10 2 3 (1) D54823Ambient 100 7 4 7 ⁄8 (124) 4 7 ⁄16 (113) 3 9 ⁄16 (90) 3 1 ⁄2 (89) 1 5 ⁄8 (41) 2 7 ⁄16 (62) 9 ⁄16 (14) 1 15 ⁄16 (49) 2 (51) 1 ⁄8 (3) #10 00 4 (2) D51868Compensated 180 8 6 1 ⁄2 (165) 4 7 ⁄16 (113) 3 9 ⁄16 (90) 3 1 ⁄2 (89) 1 5 ⁄8 (41) 3 (76) 9 ⁄16 (14) 1 15 ⁄16 (49) 2 (51) 1 ⁄8 (3) #10 250 MCM 5 (2) D52038Note: Dimensions for reference, not for construction.Dimensions in inches (mm).Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-109

Lighting & Heating ContactorsElectrically Held, Class LEDimensionsFigure 1 Figure 2Figure 3Figure 4 Figure 5Figure 6CONTROLPRODUCTSNEMA & GeneralPurpose Control16Open Type Lighting and Heating ContactorsContact Outline Dimensions Mounting DimensionsRatingMountingAmps Poles Figure A B B1 B2 C C1 D D1 E Screw20–30 2 2 3.36 2 — — 2.69 — 1.63 — 1.63 #1020–30 3 2 3.97 2.25 — — 2.88 — 3.13 3.25 1.81 #1020 4 1 3.62 2.87 — — 2.88 — 3.13 3.25 1.78 #1020 8 3 3.62 — 3.71 — 2.88 2.97 3.13 3.25 1.78 #1020 12 3 3.62 — — 4.55 2.88 2.97 3.13 3.25 1.78 #1060 3 2 4.06 2.88 — — 3.06 — 3.13 3.25 2.25 #1030–60 6 4 3.87 6.15 — — 3.06 — 3.18 — — #1030–60 9–12 4 5.25 18.62 — — 3.31 — 4.62 — 18.00 0.281100 3 6 5.19 4.00 — — 4.75 — 4.63 4.37 2.88 #10200 3 5 6.77 4.72 5.91 — 7.09 — 5.12 3.94 — 0.28300 3 5 8.27 5.71 6.89 — 8.54 — 7.09 4.72 — 0.35400 3 5 8.43 6.3 7.48 — 9.29 — 7.09 5.12 — 0.35Note: Dimensions for reference, not for construction.Dimensions in inches (mm).16-110Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Lighting & Heating ContactorsMechanically / Magnetically Held Lighting Contractors, Class CLMCLM Contactor, 20 AmpDimensionsFigure 1Figure 2Figure 3GABCDEF16 CONTROLPRODUCTSOpen Type Lighting and Heating ContactorsFigure Amp Number ofClass Number Rating Poles A B C D E F G1 30 2–4 3.31 (84) 1.65 (42) 3.95 (100) 4.38 (111) 0.23 (6) 4.61 (117) 1.50 (38)1 30 5 4.19 (106) 2.09 (53) 3.95 (100) 4.38 (111) 0.23 (6) 4.61 (117) 1.50 (38)2 60 2, 3 3.31 (84) 1.65 (42) 3.95 (100) 4.38 (111) 0.23 (6) 4.94 (125) 1.50 (38)CLM 2 60 4, 5 5.06 (129) 2.53 (64) 3.95 (100) 4.38 (111) 0.23 (6) 4.94 (125) 1.50 (38)2 100 2, 3 4.62 (117) 2.31 (59) 6.00 (152) 6.62 (168) 0.38 (10) 6.75 (171) 1.88 (48)2 100 4, 5 7.25 (184) 3.62 (92) 6.00 (152) 6.62 (168) 0.38 (10) 6.75 (171) 1.88 (48)2 200 2, 3 4.62 (117) 2.31 (59) 6.00 (152) 6.62 (168) 0.38 (10) 6.75 (171) 1.88 (48)2 200 4, 5 7.25 (184) 3.62 (92) 6.00 (152) 6.62 (168) 0.38 (10) 6.75 (171) 1.88 (48)3 30, 60 6-12 18.62 0.312 4.62 5.25 0.312 4.98 18.00NEMA & GeneralPurpose ControlNote: Dimensions for reference, not for construction.Dimensions in inches (mm).Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-111

Lighting ControlMechanically Latched 300 and 400 Amps, Class CLMCLM Contactors 300 AmpDimensions16CLM Contactors 400 AmpNEMA & GeneralPurpose ControlCONTROLPRODUCTSNote: Dimensions for reference, not for construction.Dimensions in inches (mm).16-112Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Industrial Control Power TransformersClass MTTop ViewSide ViewDimensionsDimension “C” does not include theadded height required for secondaryfuse clips—0.50 in. (13 mm) maximumfor type “K” clips.The Primary Fuse Kit, when installed, willadd a maximum of 0.69 in. (18 mm) tothe transformer “A” dimension and 1.94in. (49 mm) to the “C” dimension. A 2-pole Primary Class CC Fuse Block Kit is availablefor field installation. See page 16-74 for details.Catalog Number KCCFPX2RNote: Dimensions for reference, not for construction.Dimensions in inches (mm).Class MTApproximate Dimensions Inches (mm) ApproxVA Voltage Mounting Ship WtRating Letters A B C D E Slots Lbs (Kg)A, B, C, D, E, F, I, M 3.00 (76) 3.00 (76) 2.56 (65) 2.00 (51) 2.50 (64) 13/64 (5) X 3/8 (10) 2.6 (1)G 3.13 (79) 3.00 (76) 2.56 (65) 2.13 (54) 2.50 (64) 13/64 (5) X 3/8 (10) 2.8 (1)50 H 3.00 (76) 3.00 (76) 3.00 (76) 2.56 (65) 2.50 (64) 13/64 (5) X 3/8 (10) 3.5 (2)J 3.25 (83) 3.00 (76) 2.56 (65) 2.25 (57) 2.50 (64) 13/64 (5) X 3/8 (10) 3.4 (2)L 4.00 (102) 3.38 (86) 2.88 (73) 2.44 (62) 2.81 (71) 13/64 (5) X 3/8 (10) 4.0 (2)A, B, C, D, E, F, I, M 3.50 (89) 3.00 (76) 2.56 (65) 2.50 (64) 2.50 (64) 13/64 (5) X 3/8 (10) 3.5 (2)75 G 3.38 (86) 3.38 (86) 2.88 (73) 2.38 (60) 2.81 (71) 13/64 (5) X 3/8 (10) 4.3 (2)H 3.13 (79) 3.38 (86) 2.88 (73) 2.38 (60) 2.81 (71) 13/64 (5) X 3/8 (10) 4.5 (2)J 3.50 (89) 3.38 (86) 2.88 (73) 2.50 (64) 2.81 (71) 13/64 (5) X 3/8 (10) 4.8 (2)A, B, C, D, E, F, I, M 3.38 (86) 3.38 (86) 2.88 (73) 2.38 (60) 2.81 (71) 13/64 (5) X 3/8 (10) 4.2 (2)G 3.69 (94) 3.38 (86) 2.88 (73) 2.69 (68) 2.81 (71) 13/64 (5) X 3/8 (10) 4.9 (2)100 H 3.88 (98) 3.38 (86) 2.88 (73) 2.88 (73) 2.81 (71) 13/64 (5) X 3/8 (10) 6.0 (3)J 3.63 (92) 3.75 (95) 3.19 (81) 2.50 (64) 3.13 (79) 13/64 (5) X 3/8 (10) 5.9 (3)L 4.63 (117) 3.38 (86) 3.19 (81) 3.06 (78) 3.13 (79) 13/64 (5) X 3/8 (10) 6.6 (3)A, B, C, D, E, F, I, M 4.00 (102) 3.75 (95) 3.19 (81) 2.88 (73) 3.13 (79) 13/64 (5) X 3/8 (10) 6.7 (3)G 4.19 (106) 3.75 (95) 3.19 (81) 3.06 (78) 3.13 (79) 13/64 (5) X 3/8 (10) 7.4 (3)150 H 4.25 (108) 3.75 (95) 3.19 (81) 3.25 (83) 3.13 (79) 13/64 (5) X 3/8 (10) 7.7 (4)J 4.38 (111) 3.75 (95) 3.19 (81) 3.25 (83) 3.13 (79) 13/64 (5) X 3/8 (10) 7.9 (4)L 4.44 (113) 4.50 (114) 3.81 (97) 2.88 (73) 3.75 (95) 13/64 (5) X 3/8 (10) 8.8 (4)A, B, C, D, E, F, I, M 4.00 (102) 4.50 (114) 3.81 (97) 2.50 (64) 3.75 (95) 13/64 (5) X 3/8 (10) 8.5 (4)200 G 4.25 (108) 4.50 (114) 3.81 (97) 2.75 (70) 3.75 (95) 13/64 (5) X 3/8 (10) 9.4 (4)H 4.25 (108) 4.50 (114) 3.81 (97) 2.75 (70) 3.75 (95) 13/64 (5) X 3/8 (10) 9.0 (4)J 4.50 (114) 4.50 (114) 3.81 (97) 3.00 (76) 3.75 (95) 13/64 (5) X 3/8 (10) 10.6 (5)A, B, C, D, E, F, I, M 4.38 (111) 4.50 (114) 3.81 (97) 2.88 (73) 3.75 (95) 13/64 (5) X 3/8 (10) 10.0 (5)G 4.75 (121) 4.50 (114) 3.81 (97) 3.25 (83) 3.75 (95) 13/64 (5) X 3/8 (10) 11.1 (5)250 H 4.75 (121) 4.50 (114) 3.81 (97) 3.19 (81) 3.75 (95) 13/64 (5) X 3/8 (10) 9.7 (4)J 5.25 (133) 4.50 (114) 3.81 (97) 3.75 (95) 3.75 (95) 13/64 (5) X 3/8 (10) 13.9 (6)L 5.86 (149) 4.50 (114) 3.81 (97) 4.38 (111) 3.75 (95) 13/64 (5) X 3/8 (10) 14.7 (7)A, B, C, D, E, F, I, M 4.75 (121) 4.50 (114) 3.81 (97) 3.25 (83) 3.75 (95) 13/64 (5) X 3/8 (10) 11.3 (5)300 G 5.25 (133) 4.50 (114) 3.81 (97) 3.75 (95) 3.75 (95) 13/64 (5) X 3/8 (10) 13.6 (6)H 5.13 (130) 4.50 (114) 3.81 (97) 3.63 (92) 3.75 (95) 13/64 (5) X 3/8 (10) 11.7 (5)J 5.13 (130) 5.25 (133) 4.75 (121) 3.88 (98) 4.38 (111) 5/16 (8) X 11/16 (17) 15.5 (7)A, B, C, D, E, F, I, M 5.25 (133) 4.50 (114) 3.81 (97) 3.75 (95) 3.75 (95) 13/64 (5) X 3/8 (10) 13.6 (6)G 8.25 (149) 4.50 (114) 3.81 (97) 4.38 (111) 3.75 (95) 13/64 (5) X 3/8 (10) 15.6 (7)350 H 5.00 (127) 4.50 (114) 3.81 (97) 3.75 (95) 4.38 (111) 13/64 (5) X 3/8 (10) 16.5 (8)J 5.38 (137) 5.25 (133) 4.75 (121) 4.13 (105) 4.38 (111) 5/16 (8) X 11/16 (17) 16.8 (8)L 5.63 (143) 5.25 (133) 4.44 (113) 4.75 (121) 4.38 (111) 5/16 (8) X 11/16 (17) 18.6 (8)A, B, C, D, E, F, I, M 5.50 (140) 5.25 (133) 4.75 (121) 4.25 (108) 4.38 (111) 5/16 (8) X 11/16 (17) 19.2 (9)G 6.00 (152) 5.25 (133) 4.75 (121) 4.75 (121) 4.38 (111) 5/16 (8) X 11/16 (17) 21.0 (9)500 H 5.88 (149) 5.25 (133) 4.75 (121) 4.63 (117) 4.38 (111) 5/16 (8) X 11/16 (17) 21.5 (10)J 6.86 (175) 5.25 (133) 4.75 (121) 5.25 (133) 4.38 (111) 5/16 (8) X 11/16 (17) 21.5 (10)L 7.00 (178) 5.25 (133) 4.44 (113) 6.13 (156) 4.38 (111) 5/16 (8) X 11/16 (17) 23.4 (11)A, B, E, F, I 7.00 (178) 5.25 (133) 4.75 (121) 5.75 (146) 4.38 (111) 5/16 (8) X 11/16 (17) 28.1 (13)750G 7.38 (187) 5.25 (133) 4.75 (121) 5.75 (146) 4.38 (111) 5/16 (8) X 11/16 (17) 30.0 (14)H 7.00 (178) 5.25 (133) 4.75 (121) 5.75 (146) 4.38 (111) 5/16 (8) X 11/16 (17) 28.0 (13)L 5.63 (143) 6.75 (171) 5.75 (146) 4.13 (105) 6.06 (154) 5/16 (8) X 9/16 (14) 30.5 (14)A, E, I 7.86 (200) 5.25 (133) 4.44 (113) 5.50 (140) 4.38 (111) 9/32 (7) X 13/32 (10) 28.1 (13)1000 G 7.13 (181) 6.38 (162) 5.38 (137) 4.50 (114) 5.19 (132) 5/16 (8) X 11/16 (17) 30.0 (14)H 7.50 (191) 6.38 (162) 5.38 (137) 4.50 (114) 5.19 (132) 5/16 (8) X 11/16 (17) 29.2 (13)A, I 6.75 (171) 6.75 (171) 5.69 (144) 3.56 (90) 6.06 (154) 9/32 (7) X 9/16 (14) 30.0 (14)1500 G 7.50 (191) 6.75 (171) 5.69 (144) 4.44 (113) 6.06 (154) 9/32 (7) X 9/16 (14) 33.5 (15)H 8.25 (210) 6.75 (171) 5.69 (144) 5.25 (133) 6.06 (154) 9/32 (7) X 9/16 (14) 33.5 (15)A, I 7.00 (178) 6.75 (171) 5.69 (144) 4.44 (113) 6.06 (154) 9/32 (7) X 9/16 (14) 38.0 (17)2000 G 8.25 (210) 6.75 (171) 5.69 (144) 5.25 (133) 6.06 (154) 9/32 (7) X 9/16 (14) 42.5 (19)H 7.56 (192) 9.00 (229) 7.31 (186) 4.56 (116) 6.50 (165) 9/32 (7) X 9/16 (14) 42.5 (19)A, I 7.50 (191) 9.00 (229) 7.56 (192) 4.04 (103) 6.50 (165) 7/16 (11) X 3/4 (19) 53.0 (24)3000 G 8.00 (203) 9.00 (229) 7.56 (192) 4.63 (117) 6.50 (165) 7/16 (11) X 3/4 (19) 63.7 (29)H 8.63 (219) 9.00 (229) 7.56 (192) 5.25 (133) 6.50 (165) 7/16 (11) X 3/4 (19) 63.7 (29)A 10.0 (254) 9.00 (229) 7.56 (192) 7.50 (190) 7.20 (183) 7/16 (11) X 3/4 (19) 140.0 (64)5000 G 10.50 (267) 9.00 (229) 10.19 (259) 6.50 (165) 6.50 (165) 7/16 (11) X 3/4 (19) 102.0 (46)H 13.50 (343) 9.00 (229) 10.56 (268) 8.25 (210) 6.50 (165) 7/16 (11) X 3/4 (19) 102.0 (46)16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-113

Industrial Control Power TransformersClass MTGTop ViewSide ViewDimensionsDimension “C” does not include theadded height required for secondaryfuse clips—0.50 in. (13 mm) maximumfor type “K” clips.The Primary Fuse Kit, when installed, willadd a maximum of 0.69 in. (18 mm) tothe transformer “A” dimension and 1.94in. (49 mm) to the “C” dimension.Note: Dimensions for reference, not for construction.Dimensions in inches (mm).16CONTROLPRODUCTSNEMA & GeneralPurpose ControlClass MTGApproximate Dimensions Inches (mm)ApproxVA Voltage Mounting Ship WtRating Letters A B C D E Slots Lbs (Kg)A 3.38 (86) 3.00 (76) 3.00 (76) 2.50 (64) 2.50 (64) 13/64 (5) X 15/32 (12) 3.5 (2)50B, C, P 3.25 (83) 3.00 (76) 3.00 (76) 2.25 (57) 2.50 (64) 13/64 (5) X 15/32 (12) 3.4 (2)E, I 3.38 (86) 3.00 (76) 3.00 (76) 2.50 (64) 2.50 (64) 13/64 (5) X 15/32 (12) 3.5 (2)J 3.25 (83) 3.38 (86) 3.25 (83) 2.25 (57) 2.81 (71) 13/64 (5) X 15/32 (12) 4.2 (2)A 3.50 (89) 3.38 (86) 3.25 (83) 2.50 (64) 2.81 (71) 13/64 (5) X 15/32 (12) 4.8 (2)75B, C, P 3.25 (83) 3.38 (86) 3.25 (83) 2.25 (57) 2.81 (71) 13/64 (5) X 15/32 (12) 4.2 (2)E, I 3.50 (89) 3.38 (86) 3.25 (83) 2.50 (64) 2.81 (71) 13/64 (5) X 15/32 (12) 4.8 (2)J 3.63 (92) 3.75 (95) 3.50 (89) 2.50 (64) 3.13 (79) 13/64 (5) X 15/32 (12) 5.9 (3)A 3.63 (92) 3.75 (95) 3.50 (89) 2.50 (64) 3.13 (79) 13/64 (5) X 15/32 (12) 5.9 (3)100B, C, P 3.63 (92) 3.75 (95) 3.50 (89) 2.50 (64) 3.13 (79) 13/64 (5) X 15/32 (12) 5.9 (3)E, I 3.63 (92) 3.75 (95) 3.50 (89) 2.50 (64) 3.13 (79) 13/64 (5) X 15/32 (12) 5.9 (3)J 4.38 (111) 3.75 (95) 3.50 (89) 3.19 (81) 3.13 (79) 13/64 (5) X 15/32 (12) 7.9 (4)A 4.00 (102) 4.50 (114) 4.00 (102) 2.50 (64) 3.75 (95) 13/64 (5) X 15/32 (12) 8.5 (4)150B, C, P 4.00 (102) 4.50 (114) 4.00 (102) 2.50 (64) 3.75 (95) 13/64 (5) X 15/32 (12) 8.5 (4)E, I 4.00 (102) 4.50 (114) 4.00 (102) 2.50 (64) 3.75 (95) 13/64 (5) X 15/32 (12) 8.5 (4)J 4.00 (102) 4.50 (114) 4.00 (102) 2.81 (71) 3.75 (95) 13/64 (5) X 15/32 (12) 8.5 (4)A 4.50 (114) 4.50 (114) 4.00 (102) 3.19 (81) 3.75 (95) 13/64 (5) X 15/32 (12) 10.6 (5)200B, C, P 4.38 (111) 4.50 (114) 4.00 (102) 2.81 (71) 3.75 (95) 13/64 (5) X 15/32 (12) 10.0 (5)E, I 4.50 (114) 4.50 (114) 4.00 (102) 3.19 (81) 3.75 (95) 13/64 (5) X 15/32 (12) 10.6 (5)J 5.00 (127) 4.50 (114) 4.00 (102) 3.50 (89) 3.75 (95) 13/64 (5) X 15/32 (12) 10.6 (5)A 4.38 (111) 4.50 (114) 4.00 (102) 3.19 (81) 3.75 (95) 13/64 (5) X 15/32 (12) 11.3 (5)250B, C, P 4.75 (121) 4.50 (114) 4.00 (102) 3.19 (81) 3.75 (95) 13/64 (5) X 15/32 (12) 11.3 (5)E, I 4.75 (121) 4.50 (114) 4.00 (102) 3.19 (81) 3.75 (95) 13/64 (5) X 15/32 (12) 11.3 (5)J 5.50 (140) 4.50 (114) 4.00 (102) 4.06 (103) 3.75 (95) 13/64 (5) X 15/32 (12) 15.2 (7)A 5.13 (130) 4.50 (114) 4.00 (102) 3.75 (95) 3.75 (95) 13/64 (5) X 15/32 (12) 13.2 (6)300B, C, P 5.13 (130) 4.50 (114) 4.00 (102) 3.75 (95) 3.75 (95) 13/64 (5) X 15/32 (12) 13.2 (6)E, I 5.13 (130) 4.50 (114) 4.00 (102) 3.75 (95) 3.75 (95) 13/64 (5) X 15/32 (12) 13.2 (6)J 5.38 (137) 5.25 (133) 4.50 (114) 4.25 (108) 4.38 (111) 5/16 (8) X 11/16 (17) 16.8 (8)A 5.00 (127) 5.25 (133) 4.50 (114) 3.75 (95) 4.38 (111) 5/16 (8) X 11/16 (17) 14.9 (7)350B, C, P 5.00 (127) 5.25 (133) 4.50 (114) 3.75 (95) 4.38 (111) 5/16 (8) X 11/16 (17) 14.9 (7)E, I 5.00 (127) 5.25 (133) 4.50 (114) 3.75 (95) 4.38 (111) 5/16 (8) X 11/16 (17) 14.9 (7)J 5.50 (140) 5.25 (133) 4.50 (114) 4.25 (108) 4.38 (111) 5/16 (8) X 11/16 (17) 19.2 (9)A 6.00 (152) 5.25 (133) 4.50 (114) 4.75 (121) 4.38 (111) 5/16 (8) X 11/16 (17) 21.0 (9)500B, C, P 5.50 (140) 5.25 (133) 4.50 (114) 4.25 (108) 4.38 (111) 5/16 (8) X 11/16 (17) 19.2 (9)E, I 6.00 (152) 5.25 (133) 4.50 (114) 4.75 (121) 4.38 (111) 5/16 (8) X 11/16 (17) 21.0 (9)J 7.25 (184) 5.25 (133) 4.50 (114) 6.00 (153) 4.38 (111) 5/16 (8) X 11/16 (17) 27.0 (12)A 7.38 (187) 5.25 (133) 4.50 (114) 5.75 (146) 4.38 (111) 5/16 (8) X 11/16 (17) 30.0 (14)750B, C, P 7.00 (178) 5.25 (133) 4.50 (114) 5.38 (137) 4.38 (111) 5/16 (8) X 11/16 (17) 28.1 (13)E, I 7.38 (187) 5.25 (133) 4.50 (114) 5.75 (146) 4.38 (111) 5/16 (8) X 11/16 (17) 30.0 (14)J 5.56 (141) 6.38 (162) 7.19 (183) 4.38 (111) 5.31 (135) 5/16 (8) X 11/16 (17) 30.0 (14)A 5.31 (135) 6.38 (162) 5.31 (135) 4.06 (103) 5.31 (135) 5/16 (8) X 11/16 (17) 26.3 (12)1000 B, C 5.56 (141) 6.38 (162) 7.19 (183) 4.31 (110) 5.31 (135) 5/16 (8) X 11/16 (17) 26.3 (12)J 7.00 (178) 6.38 (162) 7.19 (183) 5.75 (146) 5.31 (135) 5/16 (8) X 11/16 (17) 40.0 (18)1500 A 6.13 (156) 6.75 (171) 7.50 (191) 4.94 (125) 6.13 (156) 9/32 (7) X 9/16 (14) 40.0 (18)2000 A 6.44 (164) 6.75 (171) 7.50 (191) 5.25 (133) 6.13 (156) 9/32 (7) X 9/16 (14) 45.1 (21)3000 A 6.25 (159) 9.00 (229) 9.38 (238) 4.56 (116) 6.50 (165) 7/16 (11) X 3/4 (19) 65.2 (30)5000 A 8.75 (222) 9.00 (229) 9.38 (238) 6.50 (165) 6.50 (165) 7/16 (11) X 3/4 (19) 104.8 (48)16-114Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Heavy Duty Motor Starters & ContactorsEnclosed, Class 14, 40DimensionsFigure 1Figure 2 Figure 3 Figure 4 Figure 5K3K1K2K3K1K3K2 K1 K3K2K1K3K2K2K2K2K2K2K3K3K2ADK2ADK3K3ADGEBADCGEBGK2K2K3CEBGK3 K1 K3CEBView is typical for bottom and topK3 K1 K2CK3K1K2NEMA 1 General Purpose Enclosure (Standard width for use with or without CPT) MountingMaxApproxOutline Dimensions Mounting Dimensions Screw Conduit SizeCPTShip WtSize Size Figure A B C D E G K1 K2 K3 K4 K5 Lbs (Kg) Ref Dwg00–1 3 ⁄4 w/o CPT 1 10 31 ⁄32 (279) 6 13 ⁄32 (163) 5 1 ⁄32 (128) 8 7 ⁄32 (209) 4 5 ⁄8 (117) 1⁄41⁄21⁄2– 3 ⁄4 3⁄4–1 — — 10 (5) D688702–2 1 ⁄2 w/o CPT 2 13 17 ⁄32 (344) 7 31 ⁄32 (202) 6 3 ⁄8 (162) 10 1 ⁄4 (260) 6 (152) 1⁄41⁄2– 3 ⁄43⁄4–1 1–1 1 ⁄4 — — 15 (7) D688703–3 1 ⁄2 (100VA) 3 19 1 ⁄8 (486) 11 3 ⁄8 (289) 7 11 ⁄16 (195) 15 5 ⁄8 (397) 8 1 ⁄4 (210) 1⁄41⁄2– 3 ⁄4 1–1 1 ⁄4 1 1 ⁄2–2 — — 26 (12) D688704 (300VA) 4 24 7 ⁄8 (632) 13 3 ⁄8 (340) 8 1 ⁄8 (206) 21 3 ⁄4 (552) 9 (229) 1⁄41⁄2– 3 ⁄4 1 1 ⁄4–1 1 ⁄2 2–2 1 ⁄2 — — 37 (17) D688705 (300VA) 5 40 (1016) 20 (508) 11 (279) 37 5 ⁄8 (956) 15 1 ⁄4 (387) 1⁄4 2–3 1 1 ⁄4–1 1 ⁄2 1⁄2– 3 ⁄4 1 1 ⁄4–1 1 ⁄2 2–3 135 (36) D656086 (300VA) 5 48 (1219) 20 (508) 12 1 ⁄2 (317) 45 3 ⁄16 (1148) 10 (254) 1⁄4 2–2 1 ⁄2 1 1 ⁄4–1 1 ⁄2 1⁄2– 3 ⁄4 1 1 ⁄4–1 1 ⁄2 2–2 1 ⁄2 150 (44) D65608NEMA 1 General Purpose Enclosure (Extra wide for use with CPT) MountingMaxApproxOutline Dimensions Mounting Dimensions Screw Conduit SizeCPTShip WtSize Size Figure A B C D E G K1 K2 K3 K4 K5 Lbs (Kg) Ref Dwg00–1 3 ⁄4 (200VA) 3 19 1 ⁄8 (486) 11 3 ⁄8 (289) 7 11 ⁄16 (195) 15 5 ⁄8 (397) 8 1 ⁄4 (210) 1⁄41⁄2– 3 ⁄4 1–1 1 ⁄4 1 1 ⁄2–2 — — 26 (12) D688702–2 1 ⁄2 (200VA) 3 19 1 ⁄8 (486) 11 3 ⁄8 (289) 7 11 ⁄16 (195) 15 5 ⁄8 (397) 8 1 ⁄4 (210) 1⁄41⁄2– 3 ⁄4 1–1 1 ⁄4 1 1 ⁄2–2 — — 26 (12) D688703–3 1 ⁄2 (250VA) 4 24 1 ⁄8 (632) 13 3 ⁄8 (340) 8 1 ⁄8 (206) 21 3 ⁄4 (552) 9 (229) 1⁄41⁄2– 3 ⁄4 1–1 1 ⁄4–1 1 ⁄2 2–2 1 ⁄2 — — 37 (17) D6887016 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Dimensions in inches (millimeters). Dimensionsfor reference, not for construction. Contact SalesOffice for dimensions not listed. Clamshell enclosure Size 00 - 4; Standard width andExtra wide.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-115

RESRESETETHeavy Duty Motor Starters & ContactorsEnclosed, Class 14, 40DimensionsFigure 1 Figure 2 Figure 3Figure 4GGADBGK2K1EK3C MAXTypical viewtop and bottomNEMA 4X Fiberglass Enclosures (Standard width for use with or without CPT)16CONTROLPRODUCTSNEMA & GeneralPurpose ControlOutline Dimensions Mounting Dimensions Mtg Screw Conduit Size Approx Ship WtSize Figure A B C D E G K1 K2 K3 Lbs (Kg) Ref Dwg0–2 1 ⁄2 1 14.620 (371) 11.880 (302) 6.890 (175) 15.000 (381) 9.750 (248) 1⁄4 — — — 11 (4.9) 24-139-861-0013–4 1 23.780 (604) 23.780 (604) 6.890 (175) 24.125 (612.7) 21.250 (539.7) 1⁄4 — — — 28 (12.7) 24-139-861-003NEMA 7/9/3/4 Hazardous Location Enclosure (Standard width for use with or without CPT)Outline Dimensions Mounting Dimensions Mtg Screw Conduit Size Approx Ship WtSize Figure A B C D E G K1 K2 K3 Lbs (Kg) Ref Dwg0–1 3 ⁄4 w/o CPT 2 15.250 (387) 10.688 (272) 10.000 (254) 8.500 (216) 9.125 (132) 3⁄82–2 1 ⁄2 (0–1 3 ⁄4 w/ CPT) 2 17.750 (451) 14.688 (373) 10.375 (264) 10.625 (270) 13.250 (337) 3⁄83–3 1 ⁄2 w/o CPT 2 17.750 (451) 14.688 (373) 10.375 (264) 10.625 (270) 13.250 (337) 3⁄84 2 28.688 (729) 17.750 (451) 11.750 (298) 18.375 (467) 15.750 (400) 1⁄25 2 48.875 (1038) 22.875 (581) 14 7/8 (377) 29 (373) 21 3 ⁄5 (533) 5⁄8NEMA 7/9/3/4 Hazardous Location Enclosure (Extra wide for use with CPT)Note: Dimensions in inches (millimeters). Dimensionsfor reference, not for construction. Contact SalesOffice for dimensions not listed.16-116 Used for addition of CPT only on size 2 1 ⁄2. If pilotdevices are needed, use size 3-3 1 ⁄2 enclosure.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog1⁄2 1 1 ⁄23⁄4 33 (14.9) 24-139-865-0021⁄2 2 3⁄4 60 (27.0) 24-139-865-0031⁄2 2 3⁄4 60 (27.0) 24-139-865-0031⁄2 3 3⁄4 140 (63.5) 24-139-865-0041⁄2 3 3⁄4 352 (159) 24-139-865-006Outline Dimensions Mounting Dimensions Mtg Screw Conduit Size Approx Ship WtSize Figure A B C D E G K1 K2 K3 Lbs (Kg) Ref Dwg0–2 1 ⁄2 2 17.750 (451) 14.688 (373) 10.375 (264) 10.625 (270) 13.250 (337) 3⁄81⁄2 2 3⁄4 60 (27.0) 24-139-865-0033–3 1 ⁄2 2 28.688 (729) 17.750 (451) 11.750 (298) 18.375 (467) 15.750 (400) 1⁄21⁄2 3 3⁄4 140 (63.5) 24-139-865-004NEMA 12/3/3R Industrial Use Enclosure (Standard width for use without CPT)Outline Dimensions Mounting Dimensions Mtg Screw Conduit Size Approx Ship WtSize Figure A B C D E G K1 K2 K3 Lbs (Kg) Ref Dwg0–1 3 ⁄4 3 13.000 (330) 7.750 (197) 5.438 (138) 12.250 (311) 5.000 (127) 1⁄4 — — — 12 (5) D415472–2 1 ⁄2 3 16.000 (406) 8.125 (206) 6.063 (154) 15.250 (387) 5.000 (127) 1⁄4 — — — 18 (8) D415473–4 3 26.000 (660) 13.125 (333) 7.563 (192) 25.250 (641) 10.000 (254) 1⁄4 — — — 49 (22) D41552NEMA 12/3/3R Industrial Use Enclosure (Extra wide for use with CPT)Outline Dimensions Mounting Dimensions Mtg Screw Conduit Size Approx Ship WtSize Figure A B C D E G K1 K2 K3 Lbs (Kg) Ref Dwg0–1 3 ⁄4 3 13.000 (330) 12.625 (321) 5.375 (137) 12.250 (311) 10.000 (254) 1⁄4 — — — 30 (14) D171502–2 1 ⁄2 3 16.000 (406) 13.250 (337) 6.125 (156) 15.250 (387) 11.000 (279) 1⁄4 — — — 33 (15) D171503–3 1 ⁄2 3 26.000 (660) 13.125 (333) 7.563 (192) 25.250 (641) 10.000 (254) 1⁄4 — — — 49 (22) D415524 3 29.063 (738) 23.188 (589) 9.250 (235) 27.563 (700) 20.000 (508) 3⁄8 — — — 64 (29) D171505 4 40.000 (1016) 20.000 (508) 11.000 (279) 41.000 (1041) 10.000 (254) 3⁄8 — — — D656080076 4 48.000 (1219) 20.000 (508) 12.500 (317) 49.000 (1244) 10.000 (254) 3⁄8 — — — D65608009NEMA 4/4X Stainless Steel Enclosure (Standard width for use without CPT)Outline Dimensions Mounting Dimensions Mtg Screw Conduit Size Approx Ship WtSize Figure A B C D E G K1 K2 K3 Lbs (Kg) Ref Dwg0–1 3 ⁄4 3 13.000 (330) 7.750 (197) 5.438 (138) 12.250 (311) 5.000 (127) 1⁄4 — — — 17.5 (8) D415462–2 1 ⁄2 3 16.000 (406) 8.125 (206) 6.063 (154) 15.250 (387) 5.000 (127) 1⁄4 — — — 36 (16) D415463–4 3 26.000 (660) 13.125 (333) 7.563 (192) 25.250 (641) 10.000 (254) 1⁄4 — — — 67 (30) D41551NEMA 4/4X Stainless Steel Enclosure (Extra wide for use with CPT)Outline Dimensions Mounting Dimensions Mtg Screw Conduit Size Approx Ship WtSize Figure A B C D E G K1 K2 K3 Lbs (Kg) Ref Dwg0–1 3 ⁄4 3 13.000 (330) 12.625 (321) 5.375 (137) 12.250 (311) 10.000 (254) 1⁄4 — — — 30 (14) D419172–2 1 ⁄2 3 16.000 (406) 13.250 (337) 6.000 (152) 15.250 (387) 11.000 (279) 1⁄4 — — — 33 (15) D429353–3 1 ⁄2 3 26.000 (660) 13.125 (333) 7.563 (192) 25.250 (641) 10.000 (254) 1⁄4 — — — 67 (30) D415514 3 29.000 (737) 23.188 (589) 9.250 (235) 27.500 (699) 20.000 (508) 5⁄16 — — — 64 (29) D432925 (Painted) 4 40.000 (1016) 20.000 (508) 11.000 (279) 41.000 (1041) 10.000 (254) 3⁄8 — — — D656080076 (Painted) 4 48.000 (1219) 20.000 (508) 12.500 (317) 49.000 (1244) 10.000 (254) 3⁄8 — — — D65608009

Combination Heavy Duty StartersEnclosed, Class 17, 18DimensionsFigure 1 Figure 2HTypical viewtop and bottom7.0 3.0 3.0HTypical viewtop and bottom1 /2 X 3 /4Knockout6.00(156)1 X 1 1 /4KnockoutBCE1 1 /2 X 2Knockout1 /2 X 3 /4Knockout 1 1 /2 X 2KnockoutBDCGAG AEDMountingHoles for1/4" ScrewsQty. 3EDMountingHoles for1/4" ScrewsQty. 4Figure 3 Figure 48.53.5 3.5HTypical viewtop and bottom1 1 /2 X 2KnockoutE1/2 X 3 /41 1 /2 Knockout X 2KnockoutBDGAC16 CONTROLPRODUCTSEDMountingHoles for1/4" ScrewsQty. 4NEMA 1 Standard Width 0–6MountingApproxOutline DimensionsDimensionsShip WtSize Figure A B C D E G H Lbs (Kg) Ref Dwg0–2 1 24 (610) 11 (279) 8 (203) 6.125 (156) 2.125 (54) 21.00 (533) 3.50 (90) 35 (16) D687740012 1 ⁄2, 3 2 24 (610) 20 (508) 8 (203) 15.00 (381) 2.125 (54) 21.00 (533) 3.50 (90) 48 (22) D687740023 1 ⁄2, 4 3 36 (914) 24 (610) 8 (203) 14.00 (356) 5.00 (127) 33.50 (851) 5.00 (127) 101 (46) D687740035 4 72.156 (1833) 20 (508) 11.031 (280) 71 (1803) 16 (406) — — 250 (113) D560320056 4 79.125 (2010) 22 (559) 13 (330) 78 (1981) 18 (457) — — 275 (125) D56032006NEMA & GeneralPurpose ControlNEMA 1 Extra Wide 0–3MountingApproxOutline DimensionsDimensionsShip WtSize Figure A B C D E G H Lbs (Kg) Ref Dwg0–2 2 24 (610) 20 (508) 8 (203) 15.00 (381) 2.125 (54) 21.00 (533) 3.50 (90) 48 (22) D687740022 1 ⁄2, 3 3 36 (914) 24 (610) 8 (203) 14.00 (356) 5.00 (127) 33.50 (851) 5.00 (127) 101 (46) D68774003Note: Dimensions in inches (mm).Dimensions for reference, not for construction.Contact sales office for dimensions not listed.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-117

Combination Heavy Duty StartersEnclosed, Class 17, 18DimensionsFigure 1Figure 2Figure 35.50(140)BCEBDCEBDCHGAAGHAGHEDMounting Holes for1/4" Screws Qty. 3Mounting Holes for1/4" Screws Qty. 4Mounting Holes for1/4" Screws Qty. 4Figure 4CFigure 5AD16CONTROLPRODUCTSMounting Holes forG3/8" screw. Qty. 4EBMounting Holes forNo. 10 Screws Qty. 4NEMA & GeneralPurpose ControlNEMA 12/3/3R/4 (Painted), 4/4X (Stainless) Standard Width 0–6MountingApproxOutline DimensionsDimensionsShip WtSize Figure A B C D E G H Lbs (Kg) Ref Dwg0–2 1 24 (610) 11 (279) 8 (203) 6.00 (152) 2.50 (64) 25.75 (654) 26.75 (680) 35 (16) D560332 1 ⁄2, 3 2 24 (610) 20 (508) 8 (203) 15.00 (381) 2.50 (64) 25.75 (654) 26.75 (680) 48 (22) D560333 1 ⁄2, 4 3 36 (914) 24 (610) 8 (203) 12 (305) 6.00 (152) 37.75 (959) 38.75 (984) 101 (46) D560335 (Painted) 4 72.156 (1833) 20 (508) 11.031 (280) 71 (1830) 16 (406) — — 250 (113) D560320056 (Painted) 4 79.125 (2010) 22 (559) 13 (330) 78 (1981) 18 (457) — — 275 (125) D56032006NEMA 12/3/3R/4 (Painted), 4/4X (Stainless) Extra Wide 0–3MountingApproxOutline DimensionsDimensionsShip WtSize Figure A B C D E G H Lbs (Kg) Ref Dwg0–2 2 24 (610) 20 (508) 8 (203) 15.00 (381) 2.50 (64) 25.75 (654) 26.75 (654) 49 (22) D560332 1 ⁄2, 3 3 36 (914) 24 (610) 8 (203) 12.00 (305) 6.00 (152) 37.75 (959) 38.75 (984) 102 (46) D56033NEMA 4X Fiberglass Standard Width 0–4MountingApproxOutline DimensionsDimensionsShip WtSize Figure A B C D E G H Lbs (Kg) Ref Dwg0–1 3 ⁄4 5 23.75 (603) 14.62 (371) 7.12 (181) 24.09 (612) 12.20 (310) — — 42 (19)2–3 1 ⁄2 5 23.75 (603) 23.75 (603) 8.50 (216) 24.06 (611) 21.30 (541) — — 44 (20)4 5 39.37 (1000) 29.52 (750) 12.20 (310) 40.94 (1040) 27.95 (710) — — 55 (25)Note: Dimensions in inches (mm).Dimensions for reference, not for construction.Contact sales office for dimensions not listed.16-118Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

RESETCombination Heavy Duty StartersEnclosed, Class 18DimensionsFigure 1RESETOFFTRIPONADRESETBG (Qty. 4)K2C MAXK1EK3Typical view bottom and topNEMA 7 & 9, 3, 4 Standard Width 0–4MountingMountingOutline Dimensions Dimensions Screw Conduit SizeApprox ShipSize Figure A B C D E G K1 K2 K3 Wt Lbs (Kg) Ref Dwg0–1 3 ⁄4 1 17.38 (441) 14.69 (373) 10.38 (264) 10.63 (270) 13.25 (337) 3⁄82–3 1 ⁄2 1 28.25 (718) 17.75 (451) 11.19 (284) 18.38 (467) 15.75 (400) 3⁄84 1 32.25 (819) 20.00 (508) 11.50 (292) 22.50 (572) 17.75 (451) 5⁄85 1 40.875 (1038) 22.875 (581) 14.875 (378) 29 (737) 21.75 (552) 5⁄83⁄4 2 1⁄2 60 (27) 24-139-865-0033⁄4 2 1 ⁄21⁄2 160 (72) 24-139-865-0043⁄4 2 1 ⁄21⁄2 250 (113) 24-139-865-0051⁄2 3 3⁄4 360 (163) —16 CONTROLPRODUCTSNote: Dimensions in inches (mm). Dimensions forreference, not for construction. Contact SalesOffice for dimensions not listed.NEMA & GeneralPurpose ControlSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-119

RESETReversing Heavy Duty Starters & ContactorsEnclosed, Class 22, 43DimensionsFigure 1Figure 2Figure 3 Figure 4K2K1K3K2K1K3GADADADRESETBGGEBEBK2C MAXCCK1EK3K3K1K2K3K1K2View is typical for bottom and top16CONTROLPRODUCTSNEMA & GeneralPurpose ControlNEMA 1 General Purpose Enclosure (Standard width for use with and without CPT)MountingApproxOutline Dimensions Mounting Dimensions Screw Conduit SizeShip WtSize Figure A B C D E G K1 K2 K3 K4 Lbs (Kg) Ref Dwg00–2 1 ⁄2 (200 VA) 1 19 1 ⁄8 (486) 11 3 ⁄8 (289) 7 11 ⁄16 (195) 15 5 ⁄8 (397) 8 1 ⁄4 (210) 1⁄41⁄2– 3 ⁄4 1–1 1 ⁄4 1 1 ⁄2–2 — 30 (14) D688703–4 (300 VA) 2 24 7 ⁄8 (632) 13 3 ⁄8 (340) 8 1 ⁄8 (206) 21 3 ⁄4 (552) 9 (229) 1⁄41⁄2– 3 ⁄4 1 1 ⁄4–1 1 ⁄2 2–2 1 ⁄2 — 52 (24) D688705 Contact Sales Office6 Contact Sales OfficeNEMA 4/4X Stainless Steel Enclosure (with or without CPT)Outline Dimensions Mounting Dimensions Mtg Screw Conduit Size Approx Ship WtSize Figure A B C D E G K1 K2 K3 Lbs (Kg) Ref Dwg0–1 3 ⁄4 3 13 (330) 12 5 ⁄8 (321) 5 3 ⁄8 (137) 12 1 ⁄4 (311) 10 (254) 1⁄4 — — — 30 (14) D419172–2 1 ⁄2 3 16 (406) 13 1 ⁄4 (337) 6 (152) 15 1 ⁄4 (387) 11 (279) 1⁄4 — — — 33 (15) D429353–3 1 ⁄2 (w/o CPT) 3 25 1 ⁄16 (637) 17 3 ⁄16 (437) 7 3 ⁄8 (187) 24 5 ⁄16 (618) 14 (356) 1⁄4 — — — 53 (24) D174233–3 1 ⁄2 (w/ CPT)43 29 (737) 23 3 ⁄16 (589) 9 1 ⁄4 (235) 27 1 ⁄2 (699) 20 (508) 5⁄16 — — — 64 (29) D432925 (Painted) Contact Sales Office6 (Painted) Contact Sales OfficeNEMA 7/9/3/4 Hazardous Location Enclosure (with or without CPT)Outline Dimensions Mounting Dimensions Mtg Screw Conduit Size Approx Ship WtSize Figure A B C D E G K1 K2 K3 Lbs (Kg) Ref Dwg0–2 1 ⁄2 4 28 1 ⁄4 (718) 16 1 ⁄4 (413) 9 1 ⁄4 (235) 18 3 ⁄8 (467) 15 3 ⁄4 (400) 1⁄23–4 4 32 1 ⁄4 (819) 18 1 ⁄4 (464) 9 9 ⁄16 (243) 22 1 ⁄2 (572) 17 3 ⁄4 (451) 1⁄21⁄2 3 3⁄4 140 24-139-865-0041⁄2 3 3⁄4 150 24-139-865-005Note: Dimensions in inches (mm).Dimensions for reference, not for construction.Contact sales office for dimensions not listed.16-120Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Reversing Heavy Duty Starters & ContactorsEnclosed, Class 22, 43DimensionsFigure 5 Figure 6 Figure 712.50 .1885.00 10.001.2048.0045.75.692.3815.2520.004-POINT MOUNTINGFOR .31 SCREWS29.88DOOROPEN90°AB C B A.38 HOLE DIA.FOR PADLOCK11.622.71K1K2K300.507.2510.0012.7516.50A COMB. K.O.’s FOR 1.00, 1.25, 1.50, 2.00, OR 2.50 CONDUITB COMB. K.O.’s FOR 1.00, 1.25, OR 1.50 CONDUITC COMB. K.O.’s FOR 0.50 OR 0.75 CONDUITView is typical for bottom and topNEMA 12/3/3R Industrial Use Enclosure (with or without CPT)Outline Dimensions Mounting Dimensions Mtg Screw Conduit Size Approx Ship WtSize Figure A B C D E G K1 K2 K3 Lbs (Kg) Ref Dwg0–1 3 ⁄4 5 13 (330) 12 5 ⁄8 (321) 5 3 ⁄8 (137) 12 1 ⁄4 (311) 10 (254) 1⁄4 — — — 30 (14) D171502–2 1 ⁄2 5 16 (406) 13 1 ⁄4 (337) 6 1 ⁄8 (156) 15 1 ⁄4 (387) 11 (279) 1⁄4 — — — 33 (15) D171503–3 1 ⁄2 (w/o CPT) 5 25 1 ⁄16 (637) 17 3 ⁄16 (437) 7 3 ⁄8 (187) 24 5 ⁄16 (618) 14 (356) 1⁄4 — — — 53 (24) D171503–3 1 ⁄2 (w/ CPT)45 29 1 ⁄16 (738) 23 3 ⁄16 (589) 9 1 ⁄4 (235) 27 9 ⁄16 (700) 20 (508) 5⁄16 — — — 64 (29) D171505 Contact Sales Office6 (300 VA CPT max.) 7 48 (1219) 20 (508) 12 1 ⁄2 (318) 45 3 ⁄4 (1162) 10 (254) 1⁄4 — — —NEMA 4X Fiberglass Enclosure (with or without CPT)Outline Dimensions Mounting Dimensions Mtg Screw Conduit Size Approx Ship WtSize Figure A B C D E G K1 K2 K3 Lbs (Kg) Ref Dwg0–2 1 ⁄2 6 23.78 (604) 14.68 (373) 6.89 (175) 22 4 ⁄5 (579) 13 4 ⁄5 (351) 1⁄4 — — — 353–3 1 ⁄2 6 23.78 (604) 23.78 (604) 6.89 (175) 22 4 ⁄5 (579) 22 4 ⁄5 (579) 1⁄4 — — — 384 Contact Sales Office16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Dimensions in inches (mm).Dimensions for reference, not for construction.Contact sales office for dimensions not listed.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-121

RESRESETETRESETOFFTRIPONCombination Reversing Heavy Duty StartersEnclosed, Class 25, 26DimensionsFigure 1 Figure 2 Figure 37.0 3.0 3.0HTypical viewtop and bottom8.53.53.5HTypical viewtop and bottomE1 1/2 X 2Knockout1/2 X 3/4KnockoutBD1 1/2 X 2KnockoutC1 1 /2 X 2KnockoutE1 /2 X 3 /4KnockoutBD1 1 /2 X 2KnockoutCGG AAEDMountingHoles for1/4" ScrewsQty. 4EDMountingHoles for1/4" ScrewsQty. 4Figure 4Figure 5Figure 6EBDCADAGHBMounting Holesfor 3/8" screws Qty. 416CONTROLPRODUCTSNEMA & GeneralPurpose ControlNEMA 1 Standard Width 0–6Mounting Holes for1/4" Screws Qty. 4MountingApproxOutline DimensionsDimensionsShip WtSize Figure A B C D E G H Lbs (Kg) Ref Dwg0–2 1 ⁄2 1 24 (610) 20 (508) 8 (203) 15.00 (381) 2.125 (54) 21.00 (533) 3.50 (90) 60 (27) D687740023–4 2 36 (914) 24 (610) 8 (203) 14.00 (356) 5.00 (127) 33.50 (851) 5.00 (127) 121 (55) D687740035 (Painted) 3 72.156 (1833) 20 (508) 11.031 (280) 71 (1803) 16 (406) — — 250 (113) D560320056 (Painted) 3 79.125 (2010) 22 (559) 13 (330) 78 (1981) 18 (457) — — 275 (125) D56032006NEMA 12/3/3R/4 (Painted), 4/4X (Stainless) Standard Width 0–6MountingApproxOutline DimensionsDimensionsShip WtSize Figure A B C D E G H Lbs (Kg) Ref Dwg0–2 1 ⁄2 5 24 (610) 20 (508) 8 (203) 15.00 (381) 3.50 (90) 25.75 (654) 26.75 (654) 63 (29) D687740053–4 5 36 (914) 24 (610) 8 (203) 12 (305) 6.00 (152) 37.75 (959) 38.75 (984) 124 (56) D687740065 (Painted) 3 72.156 (1833) 20 (508) 11.031 (280) 71 (1803) 16 (406) — — 250 (113) D560320056 (Painted) 3 79.125 (2010) 22 (559) 13 (330) 78 (1981) 18 (457) — — 275 (125) D56032006NEMA 4X Fiberglass 0–4Outline Dimensions Mounting Dimensions Mtg Screw Conduit Size Approx Ship WtSize Figure A B C D E G K1 K2 K3 Lbs (Kg) Ref Dwg0–2 1 ⁄2 4 23.780 (604) 14.680 (373) 6.890 (175) 24.125 (612.7) 12.250 (311) 3⁄8 — — — 18 (8) 24-139-861-0013–4 4 23.780 (604) 23.780 (604) 6.890 (175) 24.125 (612.7) 21.250 (539.7) 3⁄8 — — — 28 (12.7) 24-139-861-003NEMA 7/9/3/4 Hazardous Location 0–4K2K1EK3C MAXTypical viewtop and bottomOutline Dimensions Mounting Dimensions Mtg Screw Conduit Size Approx Ship WtSize Figure A B C D E G K1 K2 K3 Lbs (Kg) Ref Dwg0–2 1 ⁄2 6 28.688 (729) 17.750 (451) 11.750 (298) 18.375 (467) 15.750. (400) 3⁄81⁄2 3 3⁄4 140 (63.5) 24-139-865-0043–4 Contact Sales OfficeNote: Dimensions in inches (mm).Dimensions for reference, not for construction.Contact sales office for dimensions not listed.16-122Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Two Speed Heavy Duty StartersEnclosed, Class 30DimensionsFigure 1 Figure 1a Figure 2 Figure 3 Figure 4K2 K1 K3K2K1 K3K1 K2 K3ADADADADGEBGEBGCCEBGK1 K2 K3CEBK3 K1 K2CK3K1K22 Speed 1 WindingNEMA 1 General Purpose Enclosure (Standard width for use with or without CPT)Outline Dimensions Mounting DimensionsMtgApproxScrew Conduit Size Ship WtSize Fig A B C D E G K1 K2 K3 Lbs (Kg) Ref Dwg0–1 3 ⁄4 w/o CPT 1 19 1 ⁄8 (486) 11 3 ⁄8 (289) 7 11 ⁄16 (195) 15 5 ⁄8 (397) 8 1 ⁄4 (210) 1⁄41⁄2– 3 ⁄4 1–1 1 ⁄4 1 1 ⁄2–2 26 (12) D688700–1 3 ⁄4 (200 VA) 1a 24 7 ⁄8 (632) 13 3 ⁄8 (340) 8 1 ⁄8 (206) 21 3 ⁄4 (552) 9 (229) 1⁄41⁄2– 3 ⁄4 1 1 ⁄4 –1 1 ⁄2 2–2 1 ⁄2 52 (24) D688702–2 1 ⁄2 2 16 (406) 17.13 (435) 7.63 (194) 15.25 (387) 14 (355) 1⁄41⁄2– 3 ⁄4 1 1 ⁄4 –1 1 ⁄2 1 1 ⁄4 –1 1 ⁄2 39 (20) D429320013–3 1 ⁄2 2 18.31 (465) 21.19 (538) 7.38 (187) 17.56 (446) 18 (457) 1⁄4 1 1 ⁄4 –1 1 ⁄21⁄2 – 3 ⁄4 1 1 ⁄2–2 60 (27) D72956002NEMA 4/4X Stainless Steel Enclosure (Standard width for use with or without CPT)0–1 3 ⁄4 w/o CPT 3 13 (330) 12 5 ⁄8 (321) 5 3 ⁄8 (137) 12 1 ⁄4 (311) 10 (254) 1⁄4 — — — 34 (15) D419170000–1 3 ⁄4 w/ CPT 3 16 (406) 17 1 ⁄8 (435) 7 5 ⁄8 (194) 15 1 ⁄4 (387) 14 (355) 1⁄4 — — — 47 (21)2–2 1 ⁄2 w/o CPT 3 16 (406) 17 1 ⁄8 (435) 7 5 ⁄8 (194) 15 1 ⁄4 (387) 14 (355) 1⁄4 — — — 47 (21)2–2 1 ⁄2 w/ CPT 3 25 1 ⁄16 (637) 17 3 ⁄16 (437) 7 3 ⁄8 (187) 24 5 ⁄16 (618) 14 (355) 1⁄4 — — — 55 (25)3–3 1 ⁄2 3 29 (737) 23 3 ⁄16 (589) 9 1 ⁄4 (235) 27 1 ⁄2 (699) 20 (508) 5⁄16 — — — 61 (28) D432920014 3 29 (737) 23 3 ⁄16 (589) 9 1 ⁄4 (235) 27 1 ⁄2 (699) 20 (508) 5⁄16 — — — 61 (28) D43292001NEMA 12/3/3R Industrial Use Enclosure (Standard width for use with or without CPT)0–1 3 ⁄4 w/o CPT 3 13 (330) 12 5 ⁄8 (321) 5 3 ⁄8 (137) 12 1 ⁄4 (311) 10 (254) 1⁄4 — — — 34 (15)0–1 3 ⁄4 w/ CPT 3 16 (406) 17 1 ⁄8 (435) 7 5 ⁄8 (194) 15 1 ⁄4 (387) 14 (355) 1⁄4 — — — 47 (21) D171500102–2 1 ⁄2 w/o CPT 3 16 (406) 17 1 ⁄8 (435) 7 5 ⁄8 (194) 15 1 ⁄4 (387) 14 (355) 1⁄4 — — — 47 (21) D171500102–2 1 ⁄2 w/ CPT 3 25 1 ⁄16 (637) 17 3 ⁄16 (437) 7 3 ⁄8 (187) 24 5 ⁄16 (618) 14 (355) 1⁄4 — — — 55 (25)3–4 3 29 (737) 23 3 ⁄16 (589) 9 1 ⁄4 (235) 27 1 ⁄2 (699) 20 (508) 5⁄16 — — — 61 (28) D19673000NEMA 4X Fiberglass Enclosure (Standard width for use with or without CPT)0–2 1 ⁄2 4 23.780 (604) 23.780 (604) 6.890 (175) — — 1⁄4 — — — 28 (13) 241398610033–4 4 39.37 (1000) 29.53 (750) 12.60 (320) — — — — — — 241398610042 Speed 2 WindingNEMA 1 General Purpose Enclosure (Standard width for use with or without CPT)Outline Dimensions Mounting DimensionsMtgApproxScrew Conduit Size Ship WtSize Fig A B C D E G K1 K2 K3 Lbs (Kg) Ref Dwg0–2 1 ⁄2 w/o CPT 1 19 1 ⁄8 (486) 11 3 ⁄8 (289) 7 11 ⁄16 (195) 15 5 ⁄8 (397) 8 1 ⁄4 (210) 1⁄41⁄2– 3 ⁄4 1–1 1 ⁄4 1 1 ⁄2–2 30 (14) D688700–2 1 ⁄2 (200 VA) 1a 24 7 ⁄8 (632) 13 3 ⁄8 (340) 8 1 ⁄8 (206) 21 3 ⁄4 (552) 9 (229) 1⁄41⁄2– 3 ⁄4 1 1 ⁄4–1 1 ⁄2 2–2 1 ⁄2 52 (24) D688703–4 w/o CPT 1a 24 7 ⁄8 (632) 13 3 ⁄8 (340) 8 1 ⁄8 (206) 21 3 ⁄4 (552) 9 (229) 1⁄41⁄2– 3 ⁄4 1 1 ⁄4 –1 1 ⁄2 2–2 1 ⁄2 52 (24) D68870NEMA 4/4X Stainless Steel Enclosure (Standard width for use with or without CPT)0–1 3 ⁄4 w/o CPT 3 13 (330) 12 5 ⁄8 (321) 5 3 ⁄8 (137) 12 1 ⁄4 (311) 10 (254) 1⁄4 — — — 34 (15)0–1 3 ⁄4 w/ CPT 3 16 (406) 17 1 ⁄8 (435) 7 5 ⁄8 (194) 15 1 ⁄4 (387) 14 (355) 1⁄4 — — — 41 (19)2–2 1 ⁄2 w/o CPT 3 16 (406) 13 1 ⁄4 (337) 6 (152) 15 1 ⁄4 (387) 11 (279) 1⁄4 — — — 41 (19)2–2 1 ⁄2 w/ CPT 3 16 (406) 17 1 ⁄8 (435) 7 5 ⁄8 (194) 15 1 ⁄4 (387) 14 (355) 1⁄4 — — — 41 (19)3–3 1 ⁄2 w/o CPT 3 25 1 ⁄16 (637) 17 3 ⁄16 (187) 7 3 ⁄8 (187) 24 5 ⁄16 (618) 14 (355) 1⁄4 — — — 55 (25)3–3 1 ⁄2 w/ CPT 3 29 (737) 23 3 ⁄16 (589) 9 1 ⁄4 (235) 27 1 ⁄2 (699) 20 (508) 5⁄16 — — — 61 (28) D432920014 3 29 (737) 23 3 ⁄16 (589) 9 1 ⁄4 (235) 27 1 ⁄2 (699) 20 (508) 5⁄16 — — — 61 (28) D43292001NEMA 12/3/3R Industrial Use Enclosure (Standard width for use with or without CPT)0–1 3 ⁄4 w/o CPT 3 13 (330) 12 5 ⁄8 (321) 5 3 ⁄8 (137) 12 1 ⁄4 (311) 10 (254) 1⁄4 — — — 34 (15)0–1 3 ⁄4 w/CPT 3 16 (406) 17 1 ⁄8 (435) 7 5 ⁄8 (194) 15 1 ⁄4 (387) 14 (355) 1⁄4 — — — 41 (19) D171500102–2 1 ⁄2 w/o CPT 3 16 (406) 13 1 ⁄4 (337) 6 1 ⁄8 (156) 15 1 ⁄4 (387) 11 (279) 1⁄4 — — — 41 (19)2–2 1 ⁄2 w/CPT 3 16 (406) 17 1 ⁄8 (435) 7 5 ⁄8 (194) 15 1 ⁄4 (387) 14 (355) 1⁄4 — — — 41 (19) D171500103–3 1 ⁄2 w/o CPT 3 25 1 ⁄16 (637) 17 3 ⁄16 (187) 7 3 ⁄8 (187) 24 5 ⁄16 (618) 14 (355) 1⁄4 — — — 55 (25)3–4 w/CPT 3 29 1 ⁄16 (738) 23 3 ⁄16 (589) 9 1 ⁄4 (235) 27 9 ⁄16 (700) 20 (508) 5⁄16 — — — 61 (28) D19673000NEMA 4X Fiberglass Enclosure (Standard width for use with or without CPT)0–2 1 ⁄2 4 23.780 (604) 23.780 (604) 6.890 (175) — — 1⁄4 — — — 28 (13) 241398610033–4 4 39.37 (1000) 29.53 (750) 12.60 (320) — — — — — — 2413986100416 CONTROLPRODUCTSNEMA & GeneralPurpose ControlNote: Dimensions in inches (mm). Dimensions for reference, not for construction. Contact sales office for dimensions not listed.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-123

Combination Two Speed Heavy Duty StartersEnclosed, Class 32DimensionsFigure 1 Figure 27.0 3.0 3.08.53.5 3.5HTypical viewtop and bottomHTypical viewtop and bottomE1 1 /2 X 2Knockout1/2 X 3 /4KnockoutBD1 1 /2 X 2KnockoutC1 1 /2 X 2KnockoutE1/2 X 3 /41 1 /2 Knockout X 2KnockoutBDCGG AAEDMountingHoles for1/4" ScrewsQty. 4EDMountingHoles for1/4" ScrewsQty. 4Figure 4Figure 3EBDCCONTROLPRODUCTS16AGHMounting Holes for1/4" Screws Qty. 4NEMA & GeneralPurpose ControlNEMA 1 Standard Width 0–4MountingApproxOutline DimensionsDimensionsShip WtSize Figure A B C D E G H Lbs (Kg) Ref Dwg0–1 3 ⁄4 (1 Winding) 1 24 (610) 20 (508) 8 (203) 15.00 (381) 2.125 (54) 21.00 (533) 3.50 (90) 68 (31) D687742–4 (1 Winding) 2 36 (914) 24 (610) 8 (203) 14.00 (356) 5.00 (127) 33.50 (851) 3.50 (90) 71 (32) D687740–2 1 ⁄2, (2 Winding) 1 24 (610) 20 (508) 8 (203) 15.00 (381) 2.125 (54) 21.00 (533) 3.50 (90) 135 (61) D687743–4 (2 Winding) 2 36 (914) 24 (610) 8 (203) 14.00 (356) 5.00 (127) 33.50 (851) 3.50 (90) 138 (63) D68774NEMA 12/3/3R/4 (Painted), 4/4X Stainless Standard Width 0–40–1 3 ⁄4 (1 Winding) 4 24 (610) 20 (508) 8 (203) 15.00 (381) 2.50 (64) 25.75 (654) 26.75 (680) 68 (31) D687742–4 (1 Winding) 4 36 (914) 24 (610) 8 (203) 12 (305) 6.00 (152) 37.75 (959) 38.75 (984) 71 (32) D687740–2 1 ⁄2, (2 Winding) 4 24 (610) 20 (508) 8 (203) 15.00 (381) 2.50 (64) 25.75 (654) 26.75 (680) 135 (61) D687743–4 (2 Winding) 4 36 (914) 24 (610) 8 (203) 12 (305) 6.00 (152) 37.75 (959) 38.75 (984) 138 (63) D68774Nema 4X Fiberglass 0–4Outline Dimensions Mounting Dimensions Mtg Screw Conduit Size Approx Ship WtSize Figure A B C D E G K1 K2 K3 Lbs (Kg) Ref Dwg0–1 3 ⁄4 3 23.780 (604) 14.680 (373) 6.890 (175) 24.125 (613) 12.250 (311) 1⁄4 — — — 18 (8)2–4 3 23.780 (604) 23.780 (604) 6.890 (175) 24.125 (613) 21.250 (540) 1⁄4 — — — 28 (13)Note: Dimensions in inches (mm).Dimensions for reference, not for construction.Contact sales office for dimensions not listed.16-124Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Reduced Voltage StartersClass 36, 37DimensionsFigure 1BFigure 2HCKLCHandle(Optional)ADAMounting Holefor 1/4" screwEBJ(4) .687 Dia HolesRestricted AreaforAuto TransformerDEGClass 36, 37, NEMA 1, 4, 4X, 12/3R, Combination and Non-combinationReduced Voltage Part Winding & Wye DeltaAutoTransformerCircuitSize Disconnect Breaker Figure A B C D E G H I J K L1 3 /4–2 1 /2 0–2 0–2 1 /2 1 43 5 /16 24 5 /32 11 42 11 /32 20 2 1 /16 — — — — —3–3 1 /2 2 1 /2–3 1 /2 3–3 1 /2 1 55 5 /16 28 9 /32 11 54 11 /32 24 2 1 /8 — — — — —4 4 4 1 74 21 /32 28 9 /32 11 73 13 /32 24 2 1 /8 — — — — —5, 6 5, 6 5, 6 2 90 29 30 /31 20 16 24 7 /16 2 16 /21 1 23 /40 2 1 1 /8 8 3 /40 316 CONTROLPRODUCTSNEMA & GeneralPurpose ControlSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-125

Duplex Heavy Duty ControllersClass 83, 84DimensionsFigure 1Figure 2Figure 3A16CONTROLPRODUCTSNEMA & GeneralPurpose ControlClass 83 Non-Combination TypeMounting Mounting ApproxEnclosure Outline Dimensions Dimensions Screw Conduit Size Ship WtType Size Figure A B C D E G K1 K2 K3 K4 K5 Lbs0–1 3 ⁄4 1 19 1 ⁄2 16 1 ⁄8 6 1 ⁄2 18 3 ⁄4 13 1⁄4 1 1 ⁄4–1 1 ⁄2 1⁄2– 3 ⁄41⁄21⁄2– 3 ⁄4 1 1 ⁄4–1 1 ⁄2 20NEMA 1 2, 2 1 ⁄2 1 25 1 ⁄16 17 3 ⁄16 7 3 ⁄8 24 5 ⁄16 14 1⁄4 1 1 ⁄4–1 1 ⁄2 1⁄2– 3 ⁄41⁄2– 3 ⁄4 1 1 ⁄4–1 1 ⁄2 1 1 ⁄2–2 573–4 1 29 11 ⁄16 23 3 ⁄16 9 1 ⁄4 27 9 ⁄16 20 5⁄16 2–2 1 ⁄2 1 1 ⁄4–1 1 ⁄21⁄2– 3 ⁄4 1 1 ⁄4–1 1 ⁄2 2–2 1 ⁄2–3 930–1 3 ⁄4 2 19 1 ⁄2 16 1 ⁄8 6 1 ⁄2 18 3 ⁄4 13 1⁄4 — — — — — 20NEMA 12 2, 2 1 ⁄2 2 25 1 ⁄16 17 3 ⁄16 7 3 ⁄8 24 5 ⁄16 14 1⁄4 — — — — — 573–4 2 23 1 ⁄2 23 3 ⁄16 11 1 ⁄4 27 9 ⁄16 20 5⁄16 — — — — — 930–1 3 ⁄4 2 19 1 ⁄2 16 1 ⁄8 6 1 ⁄2 18 3 ⁄4 13 1⁄4 — — — — — 20NEMA 4/4X 2, 2 1 ⁄2 2 25 1 ⁄16 17 3 ⁄16 7 3 ⁄8 24 5 ⁄16 14 1⁄4 — — — — — 573–4 2 29 1 ⁄16 23 3 ⁄16 9 1 ⁄4 27 9 ⁄16 20 5⁄16 — — — — — 93Class 84 Combination TypeMounting Mounting ApproxEnclosure Outline Dimensions Dimensions Screw Conduit Size Ship WtType Size Figure A B C D E G K1 K2 K3 K4 K5 LbsNEMA 10–2 1 ⁄2 3 34 1 ⁄8 24 5 ⁄8 7 9 ⁄16 33 20 3⁄87⁄8–1 1 ⁄87⁄8–1 1 ⁄8 1 1 ⁄8–1 23 ⁄64 1 1 ⁄8–1 23 ⁄64 1 23 ⁄64–1 23 ⁄32 703–4 3 56 28 1 ⁄2 9 11 ⁄16 54 13 ⁄16 24 1 ⁄43⁄8 — — — — — 106NEMA 4/4X/12 0–4 3 34 1 ⁄8 24 5 ⁄8 7 9 ⁄16 33 20 3⁄8 — — — — — — Dimensions may vary for size 3 & 4stainless steel enclosures. NEMA 4 Painted, 4X Stainless Steel.16-126Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Pump Control PanelsClass 87, 88Outline DrawingsDimensionsFigure 1Figure 2Figure 3FFBE5.000CCFBOpening forConduit HubSize "P"CA D GMounting Holefor 1/4" screwDA6.000FEBAD GMounting HoleFor 3/8" screwFigure 4BHCKLHandle(Optional)L M L NMounting HolesFor 5/16" HardwareHIJKA16 CONTROLPRODUCTSJ(4) .687 Dia HolesClass 87 Standard Pump PanelConduit KnockoutHubSize Figure A B C D E F G H I J K L M N P1 – 2 1 / 2 1 28 1 / 2 20 8 1 / 16 24 — 10 27 5 1 / 2 8 1 / 2 11 1 / 2 14 1 / 21/ 2 x 3 / 4 1 1 / 4 x 1 3/ 4 x 1 1 1 / 23 – 4 1 40 1 / 2 24 8 3 / 32 36 — 12 39 8 7 / 16 11 15 / 16 15 7 / 16 — 1 31 / 32 x 2 15 / 327/ 8 x 1 1 / 8 — 2 1 / 25 2 72 5 / 32 20 10 71 16 2 1 / 8 70 29 / 32 — — — — — — — —6 2 79 1 / 8 22 12 15 / 16 78 18 2 1 / 8 77 7 / 8 — — — — — — — —4 (Vac) 2 55 31 / 32 24 3 / 8 9 22 / 32 54 26 / 32 20 1 / 4 2 1 / 8 54 23 / 32 26 3 / 16 — 5 27 14 / 32 — — — —Class 88 Reduced Voltage Pump PanelsPart Winding & Wye DeltaRVAT Fusible CircuitSize Disconnect Breaker Figure A B C D E F H I J K L2–2 1 / 2 1–2 1–2 1 / 2 3 43 5 / 16 24 5 / 32 11 42 11 / 32 20 2 1 / 16 — — — — —3–3 1 / 2 2 1 / 2 –3 1 / 2 3–3 1 / 2 3 55 5 / 16 28 9 / 32 11 54 11 / 32 24 2 1 / 8 — — — — —4 4 4 3 74 21 / 32 28 9 / 32 11 73 13 / 32 24 2 1 / 8 — — — — —5, 6 5, 6 5, 6 4 90 30 20 16 24 7 16 2 3 / 4 1 1 / 2 — 1 1 / 8 8 1 / 16 3FEDGNEMA & GeneralPurpose ControlNote: Dimensions in inches (millimeters). Dimensionsfor reference, not for construction. Contact SalesOffice for dimensions not listed.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-127

Lighting ContactorsLE, CLM, CMDimensionsFigure 1 Figure 2Figure 3 Figure 4Figure 5K3K2K1K2K2GK2K2K2ADK2BCGEBGACK1K2K3K2K2K3EDEnclosed Class LE, CLM, CMLECLMMounting MtgLighting LightingOutline Dimensions Dimensions Screw Conduit SizeNon-Combination Rating Rating Fig A B C D E G K1 K2 K3 K4 K520A (2–12p),30A (3p) 1 10 31 /32 6 13 /32 5 1 /32 8 7 /32 4 5 1/8 /430–60A (3p)— 20A (2–12p)1 13 17 /32 7 31 /32 6 3 /8 10 1 /4 6 1/430–60A (3p)1 1/2 /2– 3 /41/2– 3 /43/4–1 — —3/4–1 1–1 1 /4 — —16CONTROLPRODUCTSNEMA & GeneralPurpose Controlwithout 30–60A (6–12p),CPT 100A (3p) 100A 1 191 /8 11 3 /8 7 11 /16 15 5 /8 8 1 /41/41/2– 3 /4 1–1 1 /4 1 1 /2–2 — —— 200A 1 24 7 /8 13 3 /8 8 1 /8 21 3 /4 9 1/41/2– 3 /4 1 1 /4–1 1 /2 2 1 /2 — —200–400A — 5 26 17 5 /8 12 1 /2 25 3 /16 15 1 /21/41/2– 3 /4 1 1 /4–1 1 /2 1 1 /4–1 1 /2 — —NEMA 1 — 300–400A 2 48 20 12 1 /2 45 3 /16 10 1/4 2–2 1 /2 1 1 /4–1 1 /2 1/2– 3 /4 1 1 /4–1 1 /2 2–2 1 /220A (2–12p),30–60A (3–9p), 20–100A 1 19 1 /8 11 3 /8 7 11 /16 15 5 /8 8 1 /41/41/2– 3 /4 1–1 1 /4 1 1 /2–2 — —100A (3p)with CPT— 30–60A (6–12p) 3 16 17 1 /8 7 5 /8 15 1 /4 14 1 1/4 /2– 3 /4 1 1 /4–1 1 /2 1 1 /4–1 1 /2 — —30–60A (12p) 200A 1 24 7 /8 13 3 /8 8 1 /8 21 3 /4 9 1/41/2– 3 /4 1 1 /4 –1 1 /2 2–2 1 /2 — —200–400A — 5 26 17 5 /8 12 1 /2 25 3 /16 15 1 /2 1/4 — 1 1 /4 –1 1 /2 1 1 /4 –1 1 /2 — —— 300–400A 2 48 20 12 1 /2 45 3 /16 10 1/4 2–2 1 /2 1 1 /4 –1 1 /2 1/2– 3 /4 1 1 /4 –1 1 /2 2–2 1 /220A (2–12p)30–60A (3p) 20–30A 5 16 13 1 /4 6 1 /8 15 1 /4 11 1/4 — — — — —— 30–60A (6–12p) 3 16 17 1 /8 7 5 /8 15 1 /4 14 1/4 — — — — —without30–60A (6–9p)100A (3p)5 26 13 1 /8 7 9 /16 25 1 /4 10 1/4 — — — — —CPT 200–400A 200A 5 26 17 5 /8 12 1 /2 23 3 /16 15 1 /2 1/4 — — — — —— 60–100A 5 16 13 9 1 /2 15 1 /8 11 1/4 — — — — —NEMA — 300–400A 4 48 20 12 1 /2 49 10 1/4 — — — — —12/3R & 20A (2–12p)4/4X 30–60A (3p)20–30A 5 16 13 1 /4 6 1 /8 15 1 /4 11 1/4 — — — — —30–60A (6–9p)with CPT 100A (3p)— 5 26 13 1 /8 7 9 /16 25 1 /4 10 1/4 — — — — —— 60–100A 5 16 13 9 1 /2 15 1 /8 11 1/4 — — — — —200–400A 200A 5 26 17 5 /8 12 1 /2 25 3 /16 15 1 /2 1/4 — — — — —— 300–400A 4 48 20 12 1 /2 49 10 1/4 — — — — —LE, CMOutline DimensionsCombination Type Lighting Ratings Fig A B C D E G K1 K2 K320–60A 3 24 11 8NEMA with & Fusible and Non-fusible 100A 3 24 20 812/3R & without Disconnect 200A 3 46 20 104/4X CPT 300A 3 76 22 13Circuit Breaker 20–100A 3 24 11 816-128Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Manual ControlClass 11 - 3RV, SMF, MMSClass 11 - 3RVSignaling Contactfor Class 11 - 3RVTypical Wiring Diagrams—Class SMFWiring Diagrams3RV1921-1MTypical Wiring Diagrams—MMSAC Reversing Manual Starter andManual Motor Starting SwitchesT3COMFWDREVMotorT1FWDL1L3T3Reversing Manual MotorStarting Switch 2-Pole, 1-PhaseT1REVL1L3L1REVERSINGSINGLE PHASE3-LEADREPULSION-INDUCTIONMOTORL2Pilot Light(if used)FWD(L.H. UNIT)T1T2T3L1L2L3REV(R.H. UNIT)T1T2T3L1L2L3Reversing Manual Starter3-Pole, 3-PhaseAC 2-Speed Manual Motor Starting SwitchesHIGHLOWCOMMotorT1T3HIGHL1L3T3LOWT1L12-SPEED2-WINDINGSINGLE PHASEMOTORL3L12-Pole, 1-Phase withPilot LightsL2Pilot Lights(if used)T1T2T3HIGHL1L2L3T11T12T13T1T2MotorT3T1T2T3LOWL1L2L33-Pole, 3-PhaseL1 L2 L3Pilot Lights(if used)2-SPEED2-WINDING WYE CONNECTED3- PHASEMOTOR16 CONTROLPRODUCTSNEMA & GeneralPurpose Control3-Pole Reversing SwitchesTHREE PHASE MOTORLINE ANDMOTOR LEADSL1 toLine L2 toL3 toT1 toMeter T2 toT3 toPilot LightLeads toL.H.UNIT_T1T2T3_T1 T2 T3R.H.UNITL1L2L3_T1T3SINGLE PHASE CAPACITOROR SPLIT PHASE MOTORLINE ANDMOTOR LEADSL1 toLine L2 toT1 toT4 toMeterT5 toT8 toFurnish JumperPilot LightLeads toL.H.UNIT_T1T3L1T2L3 to_R.H.UNITL1L2_T2T1T3SINGLE PHASE 4-LEADREPULSION - INDUCTION MOTORLINE ANDMOTOR LEADSL1 toLine L2 toT1 toT4 toMeterT5 toT8 toFurnish JumperPilot LightLeads toL.H.UNIT_T2L3T3T1L3 to_R.H.UNITL1L2_T2L1T2T8 T4T1 T5T8 T1 T5 T4MotorRUNSTARTSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-129

"X1X1X1X1"Heavy Duty Motor StartersClass 143-Phase and Single Phase Magnetic StartersAmbient CompensatedSingle Phase Sizes 00-2 1/2Ambient Compensated3-Phase Sizes 00-2 1/2Wiring DiagramsAmbient Compensated3-Phase Sizes 3-4Solid State OverloadSingle Phase Sizes 0-1Solid State Overload3-Phase Sizes 00-4Solid State Overload3-Phase Sizes 5-8POWER WIRING:USE 75°C COPPER WIRE ONLY.INCOMING LINEA B CSIZECT RATIOCIRCUITPROTECTIVEDEVICE(IF USED)5300:52CTNOTE A6600:5A "16CONTROLPRODUCTS78750:51200:5CONTACTORCURRENTTRANSFORMERL1/1 L2 L33 A1 A2M2B "C"""REMOVE WIRE C " IF THE CONTACTORCOIL IS TO OPERATE ON A VOLTAGEOTHER THAN LINE VOLTAGE OR ON ASEPARATE CONTROL SOURCE.(WHEN USED, SEE TABLE)1CT 2CT 3CT95RELAY(IF USED)O.L.96T1T2T3NOTES:NEMA & GeneralPurpose ControlSolid State Overload 3-PhaseWired as 1-Phase A: 2CT IS LOCATED ON THE LINE SIDEOF CONTACTOR ON SIZE 7 STARTERS ONLY.LOAD Warning: The ESP100 Starter and Single Phase Motormust be wired with polarity as shown. Neutral and L1wires must be wired as indicated on the drawing.Polarity is indicated by the arrows.16-130 Full Load Amps (FLA): Adjustment of the ESP100 solidstate overload relay (OL) must be made as follows toaccommodate the single phase motor: For an approximatesetting of a single phase motor application,multiply the motor nameplate FLA by .75 and set theSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalogdial on the overload relay (OL) to resulting value. The 3-phase for frame size A (without windows) can notbe wired for single phase. Use the proper version forsingle phase.

Combination Heavy Duty StartersClass 17, 183-PhaseWiring DiagramsSize 0–4 THREE PHASETO SUPPLYL1 L2 L3DISCONNECT orCIRCUIT BREAKERBAALTERNATECONNECTIONS FORTRANSFORMER3VMW2T1T2T314CONTROL FUSES(OPTIONAL)OVERLOAD RELAY95 96CXFSEC FUSEH4X1T1MT2T3DH2H3H1SECX2Size 5–8 SIZECT RATIO5 300:516 CONTROLPRODUCTS6 600:57 750:58 1200:5NEMA & GeneralPurpose Control Remove wire “C” if control transformer is used. Forseparate control voltage source, remove jumpers“A” and “B” and connect source to control fuse lineterminals. Remove wire “C” if the contactor coil is to operateon a voltage other than line voltage or in a separatecontrol source.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-131

Reversing Heavy Duty StartersClass 223-Phase Solid State OverloadWiring DiagramsSolid State OverloadSizes 0- 1 3/4Solid State OverloadSizes 2-4Solid State OverloadSizes 5-6TO SUPPLYL1 L2 L3"FWD"CONTRACTORCONTACTOR"REV"CONTACTORMECHANICALINTERLOCKCURRENTTRANSFORMER(SEE TABLE)O.L.RELAYREMOVE WIRE "C" IF THE CONTACTORCOIL IS TO OPERATE ON A VOLTAGEOTHER THAN LINE VOLTAGE OR ON ASEPARATE CONTROL SOURCE.MOTOR3-Phase Ambient Compensated OverloadBimetal OverloadSizes 0-1 3/4Bimetal OverloadSizes 2-2 1/2Bimetal OverloadSizes 3-4CONTROLPRODUCTSNEMA & GeneralPurpose Control16Single Phase Ambient Compensated Overload3-Wire, 2-Pole Sizes 0-1 3/416-132Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Combination Reversing Heavy Duty StartersClass 25, 263-PhaseWiring DiagramsSize 0–4TO SUPPLYL1 L2 L3DISCONNECT orCIRCUIT BREAKERALTERNATE CONNECTIONSFOR TRANSFORMERAB10V9FOR W37 6 58VREVWT1 T2 T3OVERLOAD RELAY95 96T2T1MT324C 196CONTROL FUSES(OPTIONAL)SEC FUSEXFH4 X1H2SECH3X2H1CONTROL TRANSFORMER(OPTIONAL)REMOVE WIRE "C" IF CONTROL TRANSFORMERIS USED. FOR SEPARATE CONTROL VOLTAGESOURCE, REMOVE JUMPERS "A" AND "B" ANDCONNECT SOURCE TO CONTROL FUSE LINE TERMINALS.TO SUPPLYL1 L2 L3Size 5–6"FWD"CONTRACTORCONTACTORMECHANICAL"REV"CONTACTOR16 CONTROLPRODUCTSINTERLOCKCURRENTTRANSFORMER(SEE TABLE)O.L.RELAYNEMA & GeneralPurpose ControlREMOVE WIRE "C" IF THE CONTACTORCOIL IS TO OPERATE ON A VOLTAGEOTHER THAN LINE VOLTAGE OR ON ASEPARATE CONTROL SOURCE.MOTORSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-133

Two Speed Heavy Duty StartersClass 30 & 32 Non- Combination and Combination StartersWiring Diagrams1 Winding Constant Horsepower Size 0–1 3 /4POSITIONLOW SPEEDHIGH SPEEDTO SUPPLYL1 L2 L3DISCONNECT orCIRCUIT BREAKERHIGHAOLHIGHOLLOWALL OL'S96 95L2 L3T3T5L1T1 T2T6 T4HIGHHIGHLOWLOWLOWTOGETHERT4 T5 T6ELEMENTARY DIAGRAMT6LOWT4LOWT52 3HIGH4 5LOWT3T46 LOW7 HIGHT1T1T5T6T2T2CONSTANT HORSEPOWERMOTORT3HIGH 8LOWD68785001654TO SUPPLYL1 L2 L3DISCONNECT orCIRCUIT BREAKERV LOW WOVERLOAD RELAY95 96T1 T2 T3T1T2T3T4T5T67MWIRING DIAGRAM328VHIGH WCOVERLOAD RELAY95 96T6 T4 T5B1 96ACONTROL FUSES(OPTIONAL)CONTROL TRANSFORMER(OPTIONAL)SEC FUSEXFH4 X1H2SECH3X2H11 Winding Constant Horsepower Size 2–4NEMA & GeneralPurpose ControlCONTROLPRODUCTS161 Winding Constant or Variable Torque Size 0–1 3 /4L1TO SUPPLYL2L3DISCONNECT orCIRCUIT BREAKERLOWAOLLOW LOWLOWHIGHOLHIGH HIGHHIGHALL OL'S96 95POSITION L1 L2 L3 TOGETHERLOW SPEED T1 T2 T3HIGH SPEED T6 T4 T5 T1 T2 T3ELEMENTARY DIAGRAMT4T3T4T1HIGHT3 T1T2HIGH T5T2T6T3 CONSTANT TORQUE MOTORT6T424T1T5 T5 T2 T6VARIABLE TORQUE MOTORLOWHIGH3 HIGH 65LOWD6878500278LOWHIGHD68784001654TO SUPPLYL1 L2 L3DISCONNECT orCIRCUIT BREAKERV HIGH WOVERLOAD RELAY95 96T6T4T5T1T2T3T4T5T6WIRING DIAGRAM7M38V LOW WB2C 1 96CONTROL FUSES(OPTIONAL)OVERLOAD RELAY95 96CONTROL TRANSFORMER(OPTIONAL)T1 T2T3SEC FUSEXFH4 X1AH2H3H1SECX2Note: For separate control voltage source, remove jumpers “A” and “B” and connect source to control fuse terminal. Remove jumper “C” if control transformer is used.16-134Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Two Speed Heavy Duty StartersClass 30 & 32 Non- Combination and Combination Starters1 Winding Constant or Variable Torque Size 2–4Wiring DiagramsTO SUPPLYL1 L2 L3DISCONNECT orCIRCUIT BREAKERLOWAPOSITIONLOW SPEEDHIGH SPEEDL1T1T6LOWLOWHIGHOLHIGH HIGHHIGHALL OL'S96 95L2T2T4L3T3T5OLLOWTOGETHERT1ELEMENTARY DIAGRAMH24T2 T3H T1 T2T3 T1H T5T2T6T3 CONSTANT TORQUE MOTORT4T6T4T1T3T5 T5T2T6VARIABLE TORQUE MOTORLOWHIGH3 HIGH H5 LOW 76HT4LOW 8HHIGH54TO SUPPLY WIRING DIAGRAML1 L2 L3DISCONNECT orCIRCUIT BREAKER A B1V LO WOVERLOAD RELAY95 96V HI WT6T4T5OVERLOAD RELAY95 96T1T2T3T4T5T62 73MOTOR6C8V HT11 96 CONTROL FUSES(OPTIONAL)XFWT2SEC FUSEH4 X1H2H3H1T3SECX2CONTROL TRANSFORMER(OPTIONAL)D687840022 Winding Constant Horsepower & 2 Winding Constant or Variable Torque Size 0–416 CONTROLPRODUCTSELEMENTARY DIAGRAMTO SUPPLYL1 L2 L3DISCONNECT orCIRCUIT BREAKERLOWT2T1OLLOW LOWT2LOWT3T1T3T12HIGHT11OLHIGH HIGHT12HIGHT11T13AT13TWO WINDING MOTORALL OL'S96 954 5 LOW 68HIGHHIGHPOSITION L1 L2 L3LOW SPEED T1 T2 T323 HIGH 7HIGH SPEED T11 T12 T13LOWLOWTO SUPPLYL1 L2 L3DISCONNECT orCIRCUIT BREAKERV LOW W32T1 T2 T3OVERLOAD RELAY95 966T1T2T3T11T12T13WIRING DIAGRAM58V HIGH W7 4C 1T11 T12 T13OVERLOAD RELAY95 96MB96ACONTROL FUSES(OPTIONAL)CONTROL TRANSFORMER(OPTIONAL)SEC FUSEXFH4 X1H2SECH3X2H1NEMA & GeneralPurpose ControlD68786001Note: For separate control voltage source, remove jumpers “A” and “B” and connect source to control fuse terminal. Remove jumper “C” if control transformer is used.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-135

Reduced Voltage Starters & Pump PanelsClass 36, 37, 88Part WindingWiring DiagramsNEMA & GeneralPurpose ControlCONTROLPRODUCTS16EMT16-136Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

SEKSESSAWLMBSEKSESSAWLMBSEKSESSAWLMBLMBSAWSESSEKLMBSAWSESSEKReduced Voltage Starters & Pump PanelsClass 36, 37, 88Auto TransformerWiring DiagramsTO SUPPLYL1 L2 L3OPTIONALDISCONNECTORCIRCUIT BREAKERL2OL1S1CTRL1 L3 2S 1L1 3L1T1100%80%65%50%0%2L1OL2CTOL2SR2S1L21L3100%80%65%50%0%3L21S2L21S3L3T2*MOTORFOR MOTORHP SEECONTROLLERNAMEPLATE3CTFOR STARTERSIZES 1-4, 1CT-3CTARE NOT USED.R100%80%65%50%0%2L3T3L14FUMR1S71 7374 (A1)(A2) 75 R 76 MR 722S5FUL22SCR177(A1)1S(A2)CR1781S79(A1)MECH* INTLKR(A2)L12FUH1H43FUL2JUMPER1TAS 12NOTE E1 232 3MR1FUTRX13CPTCONNECTVOLTAGEAS SPECIFIEDPER NAMEPLATESUPPLIED AS REQUIRED(A1)X2TRMR(A2)6 (A1)(A2)CR14OL(95) (96)X216 CONTROLPRODUCTSNOTCNote E:Remove jumper if thermalprotection switch is provided.1*CONNECTIONS FOR OPTIONAL DEVICESSTARTSTOP1 2 31PB 2PBHANDOFF AUTO START1 2 3*2PB1AUTOCONTACT5*1SSOFFHAND AUTO3SURGE SUPPRESSOR(A1)(A1)CR2(A2)(A2)3 4ETMRUN/ON/RUNNING3 41LTNEMA & GeneralPurpose Control1AUTOCONTACT51SS *OFF ON1 31SS *OL OL TRIPPED1 9 X24LTMR OFF/STOP110 X25LTOPTIONAL DEVICES ARE FURNISHED PER CONTRACT DOCUMENTSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-137

Reduced Voltage Starters & Pump PanelsClass 36, 37, 88Wye Delta (Open Transition)Wiring DiagramsCUSTOMER'SINC. LINEAÿ Bÿ CÿOPTIONALDISCONNECTORCIRCUIT BREAKER1L1OL1CT1M T1 T12MT61L2OL2CTOL1M2MT2T4T2T6ST3T5T5T6 T1SST4ST4T21MT3T31L33CT2MT5FOR STARTERSIZES 1-4, 1CT-3CTARE NOT USED.1L11L24FU50MR 512MS 5652CR1S53 (A1) (A2) 54S*57 (A1) (A2)2MMR55 5FUMECHINTERLOCK1M(A1) (A2)1MSUPPLIED AS REQUIRED2FU3FU11FUH1CPT1X1 X1H4H3 H2 CONNECTVOLTAGEAS SPECIFIEDX2 PER NAMEPLATEX216CONTROLPRODUCTS1TR2 34OLX2(95) (96)(A1)(A2)MR2MR3TR 6(A1) (A2)CR1NCTOCONNECTIONS FOR OPTIONAL DEVICESNEMA & GeneralPurpose ControlSTARTSTOP121PBOFFHAND AUTO2* 151 *1SSOFFHAND AUTO1*2PBSTART2PBAUTOCONTACT333SURGE SUPPRESSOR(A1)(A2)(A1) (A2)CR234ETMRUN/ON/RUNNING341LT1AUTOCONTACT51SS *1OLOL TRIPPED9 X24LTOFFON11SS*31MROFF/STOP10 X25LTOPTIONAL DEVICES ARE FURNISHED PER CONTRACT DOCUMENTS16-138Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Reduced Voltage Starters & Pump PanelsClass 36, 37, 88Wye Delta (Closed Transition)Wiring DiagramsCUSTOMER'SINC. LINEAÿ Bÿ CÿOPTIONALDISCONNECTORCIRCUIT BREAKEROL1MT1T11L11CTRES A1A3L12M1L21L3OL2CTOL3CT1M2M1M2MT21A3L2RES BT31A3L3RES CT2T3T6ST3T5T5T6 T1SST4ST4T2FOR STARTERSIZES 1-4, 1CT-3CTARE NOT USED.1L11L24FU50MR 512M52CR153 (A1)1A(A2) 54MR555FUS 571AS56 (A1) (A2)S*58 (A1) (A2)2MMECHINTERLOCK1M(A1) (A2)1MSUPPLIED AS REQUIRED2FU3FU11H1H4H3 H2CONNECTVOLTAGECPT1FUAS SPECIFIED1X1 X1 X2 PER NAMEPLATEX2TR(A1) (A2)6CR1NCTOTROL2 3(A1)(A2) 4 (95) (96)X2MR16 CONTROLPRODUCTS2 MR 3CONNECTIONS FOR OPTIONAL DEVICESSTOP121PBOFFHAND AUTO* 11HAND1*25*1SSOFFAUTOAUTOCONTACT3START2PBSTART2PB33SURGE SUPPRESSOR(A1)(A2)(A1) CR2 (A2)34ETMRUN/ON/RUNNING341LTNEMA & GeneralPurpose Control11SSAUTOCONTACT5*1OLOL TRIPPED9 X24LTOFFON11SS*31MROFF/STOP10 X25LTOPTIONAL DEVICES ARE FURNISHED PER CONTRACT DOCUMENTSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-139

Heavy Duty Contactors and Reversing ContactorsClass 40, 433-Phase Magnetic Contactors and Reversing ContactorsWiring Diagrams3-Phase Contactors—Size 00–43-Phase Reversing Contactors—Size 00–43-Phase Contactors—Size 5, 63-Phase Reversing Contactors—Size 5, 6TO SUPPLYL1 L2 L3"FWD"CONTRACTORCONTACTOR"REV"CONTACTORMECHANICALINTERLOCK16CURRENTTRANSFORMERRELAYCONTROLPRODUCTSLOADREMOVE WIRE "C" IF THE CONTACTORCOIL IS TO OPERATE ON A VOLTAGEOTHER THAN LINE VOLTAGE OR ON ASEPARATE CONTROL SOURCE.NEMA & GeneralPurpose ControlSingle Phase Magnetic Contactors and Reversing ContactorsSingle Phase Contactors—Size 00–4Single Phase Reversing Contactors—Size 00–1P16-140Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Duplex Heavy Duty ControllersClass 83, 84Standard Duplex Pump Panel (92) Duplex Panel w/o alternator (95)Wiring16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-141

Duplex Heavy Duty ControllersClass 83, 84Duplex Panel with Relay Alternation (93) Duplex Panel with Lead Pump Transfer Switch (94)WiringNEMA & GeneralPurpose ControlCONTROLPRODUCTS1616-142Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Standard Pump Panels & Current Sensitive RelaysClass 87, 97Standard Pump PanelWiringCurrent Sensitive Relay16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-143

Lighting and Heating ContactorsElectrically Held, Class LEWiring Diagrams20 AMP30 – 100 AMPCONTROLPRODUCTSNEMA & GeneralPurpose Control16200 – 400 AMP16-144Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Lighting and Heating ContactorsMechanically Latched 20 Amp, Class CLMWiring DiagramsONOFFCONTACTOR CONTROLVOLTAGEOFFLLC0ONOFFTYPICAL OFF-ONSELECTOR SWITCHCOMMON OR SEPARATECONTROL LINESCONTROLMODULEVOLTAGEONOFF2345CR1CR2CR2CR13 WIRE CONTROL ACC. 48CR1CR2L0ONCCOILPILOT LIGHTSREQUIRE (1) EA.CLM4097291AUXILIARYCONTACT KIT.ONCONTACTOR CONTROLVOLTAGELCONTACTOR CONTROLVOLTAGELCONTROLMODULEVOLTAGEHANDOFFAUTO34CR5CRCR0COFFCOILLCONTROLMODULEVOLTAGEOFF24CR23 5CR1CR2CR1CR10COFFCOILLREMOTECONTROLON2 WIRE CONTROL ACC. 47 ON-OFF (FORM 3) CONTROL ACC. 49ONCONNECTIONS TO CONTROL MODULESCONTACTOR CONTROLVOLTAGELMODULETERMINALCONNECT TO:CONTROLMODULEVOLTAGEON-OFF345CRCRCR2 WIRE CONTROL ACC. 470COFFONCOILL12345OCNOT USEDCONT. STATION FOR ACC. 48 & 49CONT. STATION FOR ACC. 47,48 & 49MODULE CONTROL VOLTAGE *CONTACTOR CONTROL VOLTAGETERMINAL O ON CONTACTOR"TERMINAL C ON CONTACTOR"* FOR 24 VDC CONTROL MODULESCONNECT TERMINAL 4 TO NEGATIVE (-)""16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-145

Lighting and Heating ContactorsMechanically Latched 30–400 Amps, Class CLMMechanically Latched, CLM 30–200 Amps Wiring DiagramsConnection Diagram for Common/SeparateControl with Momentary Pushbutton orON-OFF Selector Switch CLMOC, CLMOD,CLMOE, and CLMOFConnection for 2-Wire Control CLMOC,CLMOD, CLMOE, and CLMOFConnection for Hand/Off/Auto ControlCLMOC, CLMOD, CLMOE, and CLMOF16Mechanically Latched Type CLM 300 and 400 Amp NEMA & GeneralPurpose ControlCONTROLPRODUCTSConnection Diagram for Common/SeparateControl with Momentary Pushbutton orON-OFF Selector Switch CLMOG andCLMOHConnection for 2-Wire Control CLMOG andCLMOHConnection for Hand/Off/Auto ControlCLMOG and CLMOH Control relay is required for 2-wire and Hand/Off/AutoControl, as shown in diagram.16-146Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Industrial Control Power TransformersClass MT, MTGVoltage LetterA Voltage LetterB Wiring DiagramsVoltage LetterC When secondary fuse clips are installed,Terminal X1 becomes XFWhen secondary fuse clips are installed,Terminal X1 becomes XFWhen secondary fuse clips areinstalled, Terminal X1 becomes XFVoltage LetterD Voltage LetterE Voltage LetterF When secondary fuse clips are installed,Terminal X1 becomes XFWhen secondary fuse clips are installed,Terminal X1 becomes XFWhen secondary fuse clips areinstalled, Terminal X1 becomes XFVoltage LetterG Voltage LetterHVoltage LetterIWhen secondary fuse clips are installed,Terminal X1 becomes XFDoes not include secondary fuse clipsDoes not include secondary fuseclips16 CONTROLPRODUCTSVoltage LetterJ Voltage LetterLVoltage LetterM NEMA & GeneralPurpose ControlWhen secondary fuse clips are installed,Terminal X3 becomes XFDoes not include secondary fuse clipsWhen secondary fuse clips areinstalled, Terminal X1 becomes XFH1Voltage LetterP380VH2 Includes secondary fuse clips on sizes 50-750VA Includes secondary fuse clips on sizes 50-500VA Secondary fuse clips are not included on MTGtransformers.24VX2X1Does not include secondary fuse clipsSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-147

16CONTROLPRODUCTSNEMA & GeneralPurpose ControlOverload Relay Heater TablesSelection of Heater Elements for Overload RelaysUse only when motor full loadcurrent is not known. Motor ampswill vary depending on the type andmanufacturer of the motor. Theseaverage values, for motors with servicefactor of 1.15, are to be used only as aguide. The formulas at the bottom of thepage may be used to obtain approximateamps for other motors.Note: RPM shown for 60 cycle motors.For 50 cycle motors, multiply RPM by .83.3-PhaseFull Load Current (60Hz)50 HzSynSpeed 200 230 460 575 380Hp RPM Volts Volts Volts Volts Volts1800 1.09 0.95 0.48 0.38 0.551⁄4 1200 1.61 1.40 0.70 0.56 0.81900 1.84 1.60 0.80 0.64 0.931800 1.37 1.19 0.60 0.48 0.641⁄3 1200 1.83 1.59 0.80 0.64 0.92900 2.07 1.80 0.90 0.72 1.041800 1.98 1.72 0.86 0.69 0.991⁄2 1200 2.47 2.15 1.08 0.86 1.24900 2.74 2.38 1.19 0.95 1.381800 2.83 2.46 1.23 0.98 1.423⁄4 1200 3.36 2.82 1.46 1.17 —900 3.75 3.26 1.63 1.30 1.883600 3.22 2.80 1.40 1.12 1.701 1800 4.09 3.56 1.78 1.42 2.061200 4.32 3.76 1.88 1.50 2.28900 4.95 4.30 2.15 1.72 2.603600 5.01 4.36 2.18 1.74 2.691 1 ⁄2 1800 5.59 4.86 2.43 1.94 2.941200 6.07 5.28 2.64 2.11 3.20900 6.44 5.60 2.80 2.24 3.393600 6.44 5.60 2.80 2.24 3.392 1800 7.36 6.40 3.20 2.56 3.841200 7.87 6.84 3.42 2.74 4.14900 9.09 7.90 3.95 3.16 4.773600 9.59 8.34 4.17 3.34 5.023 1800 10.8 9.40 4.70 3.76 5.701200 11.7 10.2 5.12 4.10 6.20900 13.1 11.4 5.70 4.55 6.803600 15.5 13.5 5.76 5.41 8.205 1800 16.6 14.4 7.21 5.78 8.741200 18.2 15.8 7.91 6.32 9.59900 18.3 15.9 7.92 6.33 9.603600 22.4 19.5 9.79 7.81 11.507 1 ⁄2 1800 24.7 21.5 10.7 8.55 13.001200 25.1 21.8 10.9 8.70 13.20900 26.5 23.0 11.5 9.19 13.903600 29.2 25.4 12.7 10.1 15.4010 1800 30.8 25.8 13.4 10.7 16.301200 32.2 28.0 14.0 11.2 16.90900 35.1 30.5 15.2 12.2 18.503600 41.9 36.4 18.2 14.5 22.0015 1800 45.1 39.2 19.6 15.7 23.701200 47.6 41.4 20.7 16.5 25.00900 51.2 44.5 22.2 17.8 26.903600 58.0 50.4 25.2 20.1 30.5020 1800 58.9 51.2 25.6 20.5 31.001200 60.7 52.8 26.4 21.1 31.90900 63.1 54.9 27.4 21.9 33.20CAUTION: Actual motor amps may behigher or lower than the values listedbelow for a particular motor. For morereliable motor protection, select heaterelements by using the full load motornameplate amps.Single Phase motor full load amps ofthe same horsepower, voltage and speedvary over wide ranges. The followingtable conforms with table 430.148 ofthe NEC.3-Phase1-PhaseFull Load Current (60Hz)GeneralHp 115 Volts 230 Volts1⁄8 4.4 2.21⁄4 5.8 2.91⁄3 7.2 3.61⁄2 9.8 4.93⁄4 13.8 6.91 16 81 1 ⁄2 20 102 24 123 34 175 56 287 1 ⁄2 80 4010 100 50Full Load Current (60Hz)50 HzSynSpeed 200 230 460 575 380Hp RPM Volts Volts Volts Volts Volts3600 69.9 60.8 30.4 24.3 36.8025 1800 74.5 64.8 32.4 25.9 39.201200 75.4 65.6 32.8 26.2 39.60900 77.4 67.3 33.7 27.0 40.703600 84.8 73.7 36.8 29.4 —30 1800 86.9 75.6 37.8 30.2 45.701200 90.6 78.8 39.4 31.5 47.60900 94.1 81.8 40.9 32.7 49.503600 111 96.4 48.2 38.5 —40 1800 116 101 50.4 40.3 61.001200 117 102 50.6 40.4 61.20900 121 105 52.2 41.7 63.203600 138 120 60.1 48.2 —50 1800 143 124 62.2 49.7 75.201200 145 126 63.0 50.4 76.20900 150 130 65.0 52.0 78.503600 164 143 71.7 57.3 —60 1800 171 149 74.5 59.4 90.001200 173 150 75.0 60.0 91.10900 177 154 77.0 61.5 93.103600 206 179 89.6 71.7 —75 1800 210 183 91.6 73.2 111.001200 212 184 92.0 73.5 112.00900 222 193 96.5 77.5 117.003600 266 231 115 92.2 —100 1800 271 236 118 94.8 144.001200 275 239 120 95.6 145.00900 290 252 126 101 153.003600 — 292 146 116 —125 1800 — 293 147 117 177.001200 — 298 149 119 180.00900 — 305 153 122 186.003600 — 343 171 137 —150 1800 — 348 174 139 210.001200 — 350 174 139 210.00900 — 365 183 146 211.003600 — 458 229 184 —200 1800 — 452 226 181 274.001200 — 460 230 184 276.00900 — 482 241 193 279.003600 — 559 279 223 —250 1800 — 568 284 227 343.001200 — 573 287 229 345.00900 — 600 300 240 347.003001800 — 278 339 271 392.001200 — 684 342 274 395.00400 1800 — 896 448 358 —Formula—Approximate Full Load Ampsfor Other Motors208 Volt Full Load Amp 230 Volt current 110%2-Phase FLA 0.866 the 3-Phase FLA2-Phase, 3-wire current in common wire 1.41 that inthe other 2 lines25Hz 1500 RPM, amps amps of 60Hz, 3600 RPM25Hz 750 RPM, amps amps of 60Hz, 1800 RPMService factor 1.0 amps 0.950°C–55°C motor amps 0.916-148Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Overload Relay Heater TablesSelection of Heater Elements for Overload RelaysTo Select Heater Catalog Number Use▪ Product Class▪ Controller Size▪ Motor Amp▪ PhaseCatalog No 14 C P 3 2 B C 81PhaseSizeClass1. Find heater table number below,using the Product Class, ControllerSize and Phase. Heater table numberis found in the column under the typeof overload and phase.2. Refer to the specified table and usethe controller size and motor amps toselect the heater catalog number.a. If motor amps are not known, anapproximate value may be found onthe previous page. These valuesshould be used with caution and onlywhen motor amps are not available.Heaters shown on the following pagesprovide a maximum trip rating of 125%of minimum motor amperes for 40˚Cmotors (service factor 1.15). For othermotors (service factor 1.0), select thenext lower listed heater catalog numberwithin the designated table whichprovides a maximum trip rating ofapproximately 115%.GeneralOverload relays do not provideprotection against short circuits.To ensure proper coordination withshort circuit protective device, selectheaters from the information packagedwith the control device.Heater Table NumberBimetal Standard Trip (Class 20) Bimetal Quick Trip (Class 10)CompensatedCompensatedE HeatersK HeatersSizeControllerGreen ResetGreen ResetorSizeClass Description Amperage Letter 1Ph 3Ph 1Ph 3PhSMF Manual All — See Page 16-150Magnetic14, 22 Non-reversing, 00-4 B–J 213 233 313 332Reversing17, 18 Combination25, 26 Reversing Combination30, 32 Multi Speed 0-4 C-J — 233 — 33283, 84 Pump Controllers87, 89 Motor Control Centers48Panel MountedOverload Relay25-180A D–J 216 238 316 33516 CONTROLPRODUCTSNEMA & GeneralPurpose ControlESP100 starters do not require heater elements. Overload Relay Selection Multi-SpeedEach speed requires a separate set of overloads. Theadjustment range must be selected on the basis of thefull-load current for each particular speed.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-149

Manual ControlHeater Elements, Class SMFGeneralOrdering InformationHeater Elements Class SMF1. Determine number of heater elements required from Table A.2. Determine motor full load current and service factor.NOTE: If motor amps are unknown, an approximate value may be found on page 16-148. These valuesshould be used with caution and only when motor amps are not available.3. If the motor and controller are in the same ambient temperature:a. For 1.15 to 1.25 service factor motors use 100% of motor full load current for heater element selection.b. For 1.0 service factor motors use 90% of motor full load current for heater element selection.4. If the motor and controller are in different ambient temperatures multiply motor full load current by the multiplier inTable B. Use the resultant full load current for heater element selection.5. Select proper heater element from table below.6. All tables are based on the operation of the motor and controller in the same ambient temperature, 40°C (104°F) orless. Always be certain the correct heater element is installed in the starter before operating the motor.16CONTROLPRODUCTSNEMA & GeneralPurpose ControlHeater Motor Full-Load ListCatalog Number Current (Amps) Price $SMFH01 0.157–0.173 13.00SMFH02 0.174–0.192 13.00SMFH03 0.193–0.212 13.00SMFH04 0.213–0.235 13.00SMFH05 0.236–0.261 13.00SMFH06 0.262–0.289 13.00SMFH07 0.290–0.321 13.00SMFH08 0.322–0.355 13.00SMFH09 0.356–0.399 13.00SMFH10 0.41–0.44 13.00SMFH11 0.45–0.49 13.00SMFH12 0.50–0.53 13.00SMFH13 0.54–0.58 13.00SMFH14 0.59–0.65 13.00SMFH15 0.66–0.71 13.00SMFH16 0.72–0.78 13.00SMFH17 0.79–0.85 13.00SMFH18 0.86–0.96 13.00SMFH19 0.97–1.04 13.00SMFH20 1.05–1.16 13.00SMFH21 1.17–1.25 13.00SMFH22 1.30–1.39 13.00SMFH23 1.38–1.54 13.00SMFH24 1.48–1.63 13.00SMFH25 1.57–1.75 13.00SMFH26 1.66–1.86 13.00Table ANumber of Heater ElementsNumber ofDevice Heater Elements NotesSMFF*1SMFF*2All single pole and two pole SMFSMFF*31 starters require only 1 HeaterSMFF*4Element.SMFF*5SMFF*6SMFF*22Duplex Unit. One Heater Element2SMFF*44per starter.SMFF*11Two Speed Starter. One Heater2SMFF*22Element per speed.Heater Motor Full-Load ListCatalog Number Current (Amps) Price $SMFH27 1.80–1.99 13.00SMFH28 1.96–2.15 13.00SMFH29 2.16–2.38 13.00SMFH30 2.39–2.75 13.00SMFH31 2.76–2.84 13.00SMFH32 2.85–3.06 13.00SMFH33 3.07–3.45 13.00SMFH34 3.46–3.70 13.00SMFH35 3.71–4.07 13.00SMFH36 4.08–4.32 13.00SMFH37 4.33–4.90 13.00SMFH38 4.91–5.35 13.00SMFH39 5.36–5.85 13.00SMFH40 5.86–6.41 13.00SMFH41 6.42–6.79 13.00SMFH42 6.80–7.57 13.00SMFH43 7.58–8.15 13.00SMFH44 8.16–8.98 13.00SMFH45 8.99–9.67 13.00SMFH46 9.68–9.95 13.00SMFH47 9.96–10.8 13.00SMFH48 10.9–12.1 13.00SMFH49 12.2–13.1 13.00SMFH50 13.2–13.9 13.00SMFH51 14.0–15.0 13.00SMFH52 15.1–16.0 13.00Table B—Special ApplicationsHeater Element SelectionContinuousDuty MotorService FactorAmbient Temperature of MotorConstant 10°C Constant 10°CSame as (18°F) Higher (18°F) LowerController Than Controller Than ControllerAmbient Ambient AmbientFull Load Current Multiplier1.15 to 1.25 1.0 0.9 1.051.0 0.9 0.8 0.9516-150Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Overload Relay Heater TablesFull Load Motor Amps, Single Phase, Trip Class 20 – Tables 213, 216Table 213 for Class 14, 22 (1-Phase)Full Load AmpsHeaterSize 00, 0, 1 Size 1P Size 2, 2 1 ⁄2 Catalog No List Price $0.37–0.40 — — E3 13.000.41–0.44 0.41–0.44 — E4 13.000.45–0.47 0.45–0.47 — E5 13.000.48–0.52 0.48–0.52 — E6 13.000.53–0.57 0.53–0.57 — E7 13.000.58–0.62 0.58–0.62 — E8 13.000.63–0.69 0.63–0.69 — E9 13.000.70–0.74 0.70–0.74 — E11 13.000.75–0.81 0.75–0.81 — E12 13.000.82–0.85 0.82–0.85 — E13 13.000.86–0.93 0.86–0.93 — E14 13.000.94–1.03 0.94–1.03 — E16 13.001.04–1.11 1.04–1.11 — E17 13.001.12–1.22 1.12–1.22 — E18 13.001.23–1.34 1.23–1.34 — E23 13.001.35–1.53 1.35–1.53 — E24 13.001.54–1.71 1.54–1.71 — E26 13.001.72–1.92 1.72–1.92 — E27 13.001.93–2.12 1.93–2.12 — E28 13.002.13–2.24 2.13–2.24 — E29 13.002.25–2.43 2.25–2.43 — E31 13.002.44–2.57 2.44–2.57 — E32 13.002.58–2.86 2.58–2.86 — E33 13.002.87–3.16 2.87–3.16 — E34 13.003.17–3.35 3.17–3.35 — E36 13.003.36–3.58 3.36–3.58 — E37 13.003.59–3.90 3.59–3.90 — E38 13.003.91–4.25 3.91–4.25 — E39 13.004.26–4.77 4.26–4.77 — E41 13.004.78–5.35 4.78–5.35 — E42 13.005.36–5.76 5.36–5.76 — E44 13.005.77–6.33 5.77–6.33 — E46 13.006.34–6.98 6.34–6.98 — E47 13.006.99–7.37 6.99–7.37 — E48 13.007.38–7.71 7.38–7.71 — E49 13.007.72–8.51 7.72–8.51 — E50 13.008.52–9.31 8.52–9.31 — E51 13.009.32–10.1 9.32–10.1 — E52 13.0010.2–10.9 10.2–10.9 — E53 13.0011.0–12.2 11.0–12.2 — E54 13.0012.3–13.5 12.3–13.5 — E55 13.0013.6–15.7 13.6–15.7 — E56 13.0015.8–17.3 15.8–17.3 19.4–22.0 E57 13.0017.4–19.9 17.4–19.9 22.1–23.5 E60 13.0020.0–21.7 20.0–21.7 23.6–25.0 E61 13.0021.8–23.4 21.8–23.4 25.1–27.0 E62 13.0023.5–24.0 23.5–23.7 27.1–28.9 E65 13.00— 23.8–25.1 29.0–31.0 E66 13.00— 25.2–27.9 31.1–34.8 E67 13.00— 28.0–32.2 34.9–36.9 E69 13.00— 32.3–34.0 37.0–43.9 E70 13.00— — 44.0–46.0 E72 13.00— — 46.1–48.3 E73 13.00— — 48.4–55.0 E74 13.00— — 55.1–60.0 E76 13.00Table 216 for Class 48Full Load AmpsHeater48DA, 48GA 48HA 48JA Catalog No List Price $0.34–0.36 — — E3 13.000.37–0.40 — — E4 13.000.41–0.43 — — E5 13.000.44–0.47 — — E6 13.000.48–0.51 — — E7 13.000.52–0.56 — — E8 13.000.57–0.62 — — E9 13.000.63–0.67 — — E11 13.000.68–0.73 — — E12 13.000.74–0.77 — — E13 13.000.78–0.84 — — E14 13.000.85–0.93 — — E16 13.000.94–1.00 — — E17 13.001.01–1.10 — — E18 13.00— — — E19 13.001.11–1.21 — — E23 13.001.22–1.38 — — E24 13.001.39–1.54 — — E26 13.001.55–1.73 — — E27 13.001.74–1.91 — — E28 13.001.92–2.02 — — E29 13.002.03–2.19 — — E31 13.002.20–2.32 — — E32 13.002.33–2.58 — — E33 13.002.59–2.85 — — E34 13.002.86–3.02 — — E36 13.003.03–3.23 — — E37 13.003.24–3.52 — — E38 13.003.53–3.83 — — E39 13.003.84–4.30 — — E41 13.004.31–4.82 — — E42 13.004.83–5.19 — — E44 13.005.20–5.71 — — E46 13.005.72–6.29 — — E47 13.006.30–6.64 — — E48 13.006.65–6.95 — — E49 13.006.96–7.67 — — E50 13.007.68–8.39 — — E51 13.008.40–9.19 — — E52 13.009.20–9.94 — — E53 13.009.95–10.9 — — E54 13.0011.0–12.2 — — E55 13.0012.3–14.2 — — E56 13.0014.3–15.6 — — E57 13.00— — — E59 13.0015.7–17.9 — — E60 13.0018.0–19.6 — — E61 13.0019.7–22.3 — — E62 13.0022.4–24.0 — — E65 13.0024.1–25.9 — — E66 13.0026.0–29.5 27.1–30.0 — E67 13.0029.6–32.5 30.1–33.2 — E69 13.0032.6–33.5 33.3–35.7 — E70 13.0033.6–36.9 35.8–39.4 — E71 13.0037.0–39.2 39.5–43.4 — E72 13.0039.3–43.1 43.5–46.9 — E73 13.0043.2–47.4 47.0–51.5 — E74 13.0047.5–50.0 51.6–57.0 — E76 13.0050.1–55.2 57.1–62.8 — E77 13.0055.3–60.0 62.9–69.1 — E78 13.00— 69.2–75.0 — E79 13.00— 75.1–83.3 — E80 13.00— — 50.0–55.9 E88 13.00— — 56.0–60.9 E89 13.00— — 61.0–65.9 E91 13.00— — 66.0–69.9 E92 13.00— — 70.0–75.9 E93 13.00— — 76.0–81.9 E94 13.00— 83.4–86.9 82.0–86.9 E96 13.00— 87.0–92.9 87.0–92.9 E97 13.00— 93.0–100.0 93.0–97.9 E98 13.00— — 98.0–107.9 E99 13.00— — 108.0–113.9 E101 13.00— — 114.0–125.0 E102 13.00— — 126.0–138.0 E103 13.00— — 139.0–153.0 E104 13.00— — 154.0–163.0 E106 13.00— — 164.0–180.0 E107 13.00Selection16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlDiscount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-151

16CONTROLPRODUCTSNEMA & GeneralPurpose ControlOverload Relay Heater TablesFull Load Motor Amps, 3-Phase, Trip Class 20 – Tables 233, 238Table 233 for Class 14, 17, 18, 22, 25, 26, 30, 32, 83, 84, 87 (3-Phase)Full Load AmpsHeaterSize 00, 0, 1 Size 1 3 ⁄4 Size 2, 2 1 ⁄2 Size 3, 3 1 ⁄2 Size 4 Catalog No List Price $0.38–0.40 — — — — E6 13.000.41–0.43 — — — — E7 13.000.44–0.48 — — — — E8 13.000.49–0.53 — — — — E9 13.000.54–0.57 — — — — E11 13.000.58–0.62 — — — — E12 13.000.63–0.66 — — — — E13 13.000.67–0.72 — — — — E14 13.000.73–0.80 — — — — E16 13.000.81–0.85 — — — — E17 13.000.86–0.92 — — — — E18 13.000.93–0.99 — — — — E19 13.001.00–1.08 — — — — E23 13.001.09–1.23 — — — — E24 13.001.24–1.37 — — — — E26 13.001.38–1.54 — — — — E27 13.001.55–1.69 — — — — E28 13.001.70–1.80 — — — — E29 13.001.81–1.94 — — — — E31 13.001.95–2.07 — — — — E32 13.002.08–2.26 — — — — E33 13.002.27–2.54 2.27–2.54 — — — E34 13.002.55–2.69 2.55–2.69 — — — E36 13.002.70–2.88 2.70–2.88 — — — E37 13.002.89–3.14 2.89–3.14 — — — E38 13.003.15–3.40 3.15–3.40 — — — E39 13.003.41–3.81 3.41–3.81 — — — E41 13.003.82–4.26 3.82–4.25 — — — E42 13.004.27–4.62 4.26–4.62 — — — E44 13.004.63–5.09 4.63–5.09 — — — E46 13.005.10–5.61 5.10–5.61 — — — E47 13.005.62–5.91 5.62–5.91 — — — E48 13.005.92–6.15 5.92–6.15 — — — E49 13.006.16–6.70 6.16–6.70 — — — E50 13.006.71–7.54 6.71–7.54 — — — E51 13.007.55–8.29 7.55–8.29 — — — E52 13.008.30–8.99 8.30–8.99 — — — E53 13.009.00–9.85 9.00–9.85 — — — E54 13.009.86–10.4 9.86–10.4 — — — E55 13.0010.5–12.0 10.5–12.0 10.5–12.0 — — E56 13.0012.1–13.6 12.1–13.6 12.1–13.6 — — E57 13.0013.7–15.6 13.7–15.6 13.7–15.6 — — E60 13.0015.7–17.0 15.7–17.0 15.7–17.1 — — E61 13.0017.1–18.4 17.1–19.4 17.2–19.4 — — E62 13.0018.5–19.4 19.5–20.9 19.5–20.9 — — E65 13.0019.5–21.3 21.0–22.2 21.0–22.2 — — E66 13.0021.4–24.4 22.3–25.3 22.3–25.3 — — E67 13.0024.5–25.9 25.4–26.9 25.4–26.9 30.0–33.5 — E69 13.0026.0–27.0 27.0–30.2 27.0–30.2 33.6–36.4 — E70 13.00— — — 36.5–39.6 — E71 13.00— 30.3–33.3 30.3–33.3 — — E72 13.00— 33.4–36.0 33.4–35.3 39.7–43.6 — E73 13.00— — — 43.7–46.5 — E73A 13.00— — 35.4–41.5 46.6–51.6 — E74 13.00— — 41.6–45.0 51.7–54.4 — E76 13.00— — 45.1–52.3 54.5–58.0 — E77 13.00— — 52.4–55.7 58.1–63.0 — E78 13.00— — 55.8–60.0 63.1–67.7 — E79 13.00— — — 67.8–72.4 — E80 13.00— — — — — E88 13.00— — — — 56.9–60.9 E89 13.00— — — — 61.0–63.9 E91 13.00— — — — 64.0–67.7 E92 13.00— — — — 67.8–72.4 E93 13.00— — — 72.5–80.0 72.5–77.7 E94 13.00— — — 80.1–88.1 77.8–85.9 E96 13.00— — — 88.2–91.5 86.0–91.9 E97 13.00— — — 91.6–96.8 92.0–96.7 E98 13.00— — — 96.9–99.0 96.8–105 E99 13.00— — — 99.1–108.0 — E101 13.00— — — — — E102 13.00— — — — 106–115 E103 13.00— — — — 116–130 E104 13.00Table 238 for Class 48SelectionFull Load AmpsHeater48DC 48GC 48HA 48JA Catalog No List Price $0.30–0.32 — — — E3 13.000.33–0.35 — — — E4 13.000.36–0.38 — — — E5 13.000.39–0.41 — — — E6 13.000.42–0.44 — — — E7 13.000.45–0.49 — — — E8 13.000.50–0.54 — — — E9 13.000.55–0.58 — — — E11 13.000.59–0.63 — — — E12 13.000.64–0.67 — — — E13 13.000.68–0.73 — — — E14 13.000.74–0.81 — — — E16 13.000.82–0.87 — — — E17 13.000.88–0.94 — — — E18 13.000.95–1.00 — — — E19 13.001.01–1.10 — — — E23 13.001.11–1.26 — — — E24 13.001.27–1.40 — — — E26 13.001.41–1.58 — — — E27 13.001.59–1.74 — — — E28 13.001.75–1.85 — — — E29 13.001.86–1.99 — — — E31 13.002.00–2.11 — — — E32 13.002.12–2.31 — — — E33 13.002.32–2.59 — — — E34 13.002.60–2.75 — — — E36 13.002.76–2.95 — — — E37 13.002.96–3.21 — — — E38 13.003.22–3.48 — — — E39 13.003.49–3.89 — — — E41 13.003.90–4.35 — — — E42 13.004.36–4.73 — — — E44 13.004.74–5.21 — — — E46 13.005.22–5.74 — — — E47 13.005.75–6.05 — — — E48 13.006.06–6.46 — — — E49 13.006.47–6.95 — — — E50 13.006.96–8.09 — — — E51 13.008.10–9.29 — — — E52 13.009.30–10.4 — — — E53 13.00— — — — E54 13.0010.5–10.9 — — — E55 13.0011.0–12.0 — — — E56 13.0012.1–14.5 — — — E57 13.0014.6–16.8 — — — E60 13.0016.9–18.4 16.9–18.4 — — E61 13.0018.5–20.9 18.5–20.9 — — E62 13.0021.0–22.5 21.0–22.5 — — E65 13.0022.6–24.3 22.6–24.7 — — E66 13.0024.4–27.2 24.8–27.2 27.1–30.0 — E67 13.0027.3–29.2 27.3–29.2 30.1–33.2 — E69 13.0029.3–30.0 29.3–32.0 33.3–35.7 — E70 13.00— 32.1–34.9 35.8–39.4 — E71 13.00— — 39.5–43.4 — E72 13.00— 35.0–37.8 43.5–46.9 — E73 13.00— 37.9–41.7 — — E73A 13.00— 41.8–45.9 47.0–51.5 — E74 13.00— 46.0–49.0 51.6–57.0 — E76 13.00— 49.1–54.2 57.1–62.8 — E77 13.00— 54.3–60.0 62.9–69.1 — E78 13.00— — 69.2–75.0 — E79 13.00— — 75.1–83.3 — E80 13.00— — — 50.0–55.9 E88 13.00— — — 56.0–60.9 E89 13.00— — — 61.0–65.9 E91 13.00— — — 66.0–69.9 E92 13.00— — — 70.0–75.9 E93 13.00— — — 76.0–81.9 E94 13.00— — 83.4–86.9 82.0–86.9 E96 13.00— — 87.0–92.9 87.0–92.9 E97 13.00— — 93.0–100.0 93.0–97.9 E98 13.00— — — 98.0–107.9 E99 13.00— — — 108–113.9 E101 13.00— — — 114–125.9 E102 13.00— — — 126–138.9 E103 13.00— — — 139–153.9 E104 13.00— — — 154–163.9 E106 13.00— — — 164–180.9 E107 13.0016-152Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Overload Relay Heater TablesFull Load Motor Amps, Single Phase, Trip Class 10 – Tables 313, 316Table 313 for Class 14, 22 (1-Phase)Full Load AmpsHeaterSize 00, 0, 1 Size 1P Size 2, 2 1 ⁄2 Catalog No List Price $1.85–2.05 1.85–2.05 — K21 13.002.06–2.35 2.06–2.35 — K22 13.002.36–2.64 2.36–2.64 — K24 13.002.65–2.96 2.65–2.96 — K27 13.002.97–3.31 2.97–3.31 — K28 13.003.32–3.51 3.32–3.51 — K29 13.003.52–3.87 3.52–3.87 — K31 13.003.88–4.31 3.88–4.31 — K32 13.004.32–4.79 4.32–4.79 — K33 13.004.80–5.21 4.80–5.21 — K34 13.005.22–5.75 5.22–5.75 — K36 13.005.76–6.11 5.76–6.11 — K37 13.006.12–6.95 6.12–6.95 — K39 13.006.96–7.73 6.96–7.73 — K41 13.007.74–8.47 7.74–8.47 — K42 13.008.48–9.52 8.48–9.52 — K43 13.009.53–10.4 9.53–10.4 — K49 13.0010.5–11.1 10.5–11.1 — K50 13.0011.2–12.4 11.2–12.4 — K52 13.0012.5–13.5 12.5–13.5 — K53 13.0013.6–15.1 13.6–15.1 — K54 13.0015.2–16.6 15.2–16.6 — K55 13.0016.7–17.6 16.7–17.6 — K57 13.0017.7–18.8 17.7–18.8 18.7–19.7 K58 13.0018.9–21.6 18.9–21.6 19.8–21.3 K60 13.0021.7–22.7 21.7–22.7 21.4–22.8 K61 13.0022.8–25.3 22.8–25.3 22.9–24.2 K62 13.00— 25.4–26.6 24.3–26.5 K63 13.00— 26.7–30.1 26.6–29.3 K64 13.00— 30.2–33.0 29.4–32.0 K67 13.00— 33.1–34.1 32.1–35.6 K68 13.00— — 35.7–37.9 K69 13.00— — 38.0–40.3 K70 13.00— — 40.4–44.3 K72 13.00— — 44.4–49.5 K73 13.00— — 49.6–52.1 K74 13.00— — 52.2–53.7 K75 13.00— — 53.8–60.0 K76 13.00Table 316 for Class 48Full Load AmpsHeater48DA 48GA 48HA 48JA Catalog No List Price $1.69–1.88 — — — K21 13.001.89–2.05 — — — K22 13.002.06–2.21 — — — K23 13.002.22–2.44 — — — K24 13.002.45–2.70 — — — K26 13.002.71–2.92 — — — K27 13.002.93–3.27 — — — K28 13.003.28–3.56 — — — K29 13.003.57–3.83 — — — K31 13.003.84–4.23 — — — K32 13.004.24–4.57 — — — K33 13.004.58–4.97 — — — K34 13.004.98–5.67 — — — K36 13.005.68–6.11 — — — K37 13.006.12–6.91 — — — K39 13.006.92–7.65 — — — K41 13.007.66–8.4 — — — K42 13.008.5–8.9 — — — K43 13.009.0–10.1 9.12–9.6 — — K49 13.0010.2–11.2 9.7–10.4 — — K50 13.0011.3–12.3 10.5–11.4 — — K52 13.0012.4–13.3 11.5–12.1 — — K53 13.0013.4–14.1 12.2–12.9 — — K54 13.0014.2–15.0 13.0–13.7 — — K55 13.0015.1–16.2 13.8–14.8 — — K56 13.0016.3–17.5 14.9–16.4 — — K57 13.0017.6–18.6 16.5–18.2 — — K58 13.0018.7–19.9 18.3–19.5 — — K60 13.0020.0–21.3 19.6–20.9 — — K61 13.0021.4–22.8 21.0–22.8 23.2–25.1 — K62 13.0022.9–25.1 22.9–24.7 25.2–27.3 — K63 13.0025.2–27.6 24.8–27.6 27.4–30.4 — K64 13.0027.7–30.0 27.7–30.5 30.5–33.3 — K67 13.00— 30.6–33.9 33.4–36.5 — K68 13.00— 34.0–37.3 36.6–39.3 — K69 13.00— 37.4–40.2 39.4–43.5 — K70 13.00— 40.3–41.9 43.6–46.6 43.0–46.5 K72 13.00— 42.0–45.9 46.7–51.1 46.6–50.9 K73 13.00— 46.0–50.9 51.2–56.3 51.0–55.9 K74 13.00— 51.0–52.9 56.4–61.1 56.0–59.1 K75 13.00— 53.0–57.7 61.2–64.9 59.2–68.7 K76 13.00— 57.8–60.0 65.0–71.9 — K77 13.00— — 72.0–80.7 68.8–80.7 K78 13.00— — 80.8–92.7 80.8–92.7 K85 13.00— — 92.8–100.0 92.8–103.9 K86 13.00— — — 104.0–113.5 K87 13.00— — — 113.6–127.9 K89 13.00— — — 128.0–143.9 K92 13.00— — — 144.0–163.9 K94 13.00— — — 164.0–180.0 K96 13.00Selection16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlDiscount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-153

16CONTROLPRODUCTSNEMA & GeneralPurpose ControlOverload Relay Heater TablesFull Load Motor Amps, 3-Phase, Trip Class 10 – Tables 332, 335Table 332 for Class 14, 17, 18, 22, 25, 26, 30, 32, 83, 84, 87 (3-Phase)Full Load AmpsHeaterSize 00, 0, 1 Size 1 3 ⁄4 Size 2, 2 1 ⁄2 Size 3, 3 1 ⁄2 Size 4 Catalog No List Price $1.52–1.65 1.52–1.65 — — — K21 13.001.66–1.79 1.66–1.79 — — — K22 13.001.80–1.94 1.80–1.94 — — — K23 13.001.95–2.15 1.95–2.15 — — — K24 13.002.16–2.37 2.16–2.37 — — — K26 13.002.38–2.56 2.38–2.56 — — — K27 13.002.57–2.87 2.57–2.87 — — — K28 13.002.88–3.13 2.88–3.13 — — — K29 13.003.14–3.37 3.14–3.37 — — — K31 13.003.38–3.72 3.38–3.72 — — — K32 13.003.73–4.00 3.73–4.00 — — — K33 13.004.01–4.35 4.01–4.35 — — — K34 13.004.36–4.99 4.36–4.99 — — — K36 13.005.00–5.38 5.00–5.38 — — — K37 13.005.39–5.79 5.39–5.79 — — — K39 13.005.80–6.43 5.80–6.43 — — — K41 13.006.44–6.83 6.44–6.83 — — — K42 13.006.84–7.83 6.84–7.83 — — — K43 13.007.84–8.23 7.84–8.23 — — — K49 13.008.24–9.59 8.24–9.59 — — — K50 13.009.60–9.90 9.60–9.90 — — — K52 13.0010.0–10.7 10.0–10.7 — — — K53 13.0010.8–11.6 10.8–11.6 12.1–12.7 — — K54 13.0011.7–12.3 11.7–12.3 12.8–13.5 — — K55 13.0012.4–13.4 12.4–13.4 13.6–14.6 — — K56 13.0013.5–14.2 13.5–14.2 14.7–15.9 — — K57 13.0014.3–15.1 14.3–15.1 16.0–16.9 — — K58 13.0015.2–17.5 15.2–17.5 17.0–18.2 — — K60 13.0017.6–18.7 17.6–18.7 18.3–19.5 — — K61 13.0018.8–20.0 18.8–20.0 19.6–20.9 — — K62 13.0020.1–21.5 20.1–21.5 21.0–23.1 — — K63 13.0021.6–23.9 21.6–23.9 23.2–25.4 — — K64 13.0024.0–25.8 24.0–25.8 25.5–27.9 — — K67 13.00— 25.9–29.5 — — — K68 13.00— — 28.0–30.5 — — K69 13.00— 29.6–32.7 30.6–33.5 36.8–40.0 — K70 13.00— 32.8–36.0 33.6–37.2 40.1–42.4 — K72 13.00— — 37.3–40.7 42.5–46.3 — K73 13.00— — 40.8–43.0 46.4–49.6 — K74 13.00— — 43.1–47.9 49.7–52.3 49.7–52.3 K75 13.00— — 48.0–52.7 52.4–57.5 52.4–57.5 K76 13.00— — 52.8–58.3 57.6–63.9 57.6–63.0 K77 13.00— — 58.4–60.0 64.0–67.9 63.1–68.1 K78 13.00— — — 68.0–74.3 68.2–74.3 K83 13.00— — — 74.4–77.9 74.4–79.9 K85 13.00— — — 78.0–83.1 80.0–87.4 K86 13.00— — — 83.2–91.4 87.5–90.0 K87 13.00— — — 91.5–99.9 90.1–100.0 K88 13.00— — — 100.0–108.0 100.1–108.0 K89 13.00— — — — 108.1–119.0 K90 13.00— — — — 119.1–130.0 K92 13.00— — — — — K94 13.00— — — — — K96 13.00Table 335 for Class 48SelectionFull Load AmpsHeater48DC 48GC 48HA 48JA Catalog No List Price $1.56–1.69 — — — K21 13.001.70–1.84 — — — K22 13.001.85–1.98 — — — K23 13.001.99–2.19 — — — K24 13.002.20–2.43 — — — K26 13.002.44–2.63 — — — K27 13.002.64–2.95 — — — K28 13.002.96–3.21 — — — K29 13.003.22–3.45 — — — K31 13.003.46–3.81 — — — K32 13.003.82–4.10 — — — K33 13.004.11–4.46 — — — K34 13.004.47–5.10 — — — K36 13.005.11–5.49 — — — K37 13.005.50–6.21 — — — K39 13.006.22–6.76 — — — K41 13.006.77–7.62 — — — K42 13.007.63–8.07 — — — K43 13.008.08–9.19 — — — K49 13.009.20–10.0 — — — K50 13.0010.1–11.0 — — — K52 13.0011.1–12.0 — — — K53 13.0012.1–12.7 — — — K54 13.0012.8–13.5 — — — K55 13.0013.6–14.5 — — — K56 13.0014.6–15.7 — — — K57 13.0015.8–16.7 — — — K58 13.0016.8–17.9 — — — K60 13.0018.0–19.2 18.0–19.2 — — K61 13.0019.3–20.5 19.3–20.5 23.2–25.1 — K62 13.0020.6–22.5 20.6–22.5 25.2–27.3 — K63 13.0022.6–24.8 22.6–24.8 27.4–30.4 — K64 13.0024.9–27.6 24.9–27.6 30.5–33.3 — K67 13.0027.7–30.0 — 33.4–36.5 — K68 13.00— 27.7–30.1 36.6–39.3 — K69 13.00— 30.2–33.1 39.4–43.5 — K70 13.00— 33.2–36.7 43.6–46.6 43.0–46.5 K72 13.00— 36.8–40.1 46.7–51.1 46.6–50.9 K73 13.00— 40.2–45.5 51.2–56.3 51.0–55.9 K74 13.00— 45.6–47.9 56.4–61.1 56.0–59.1 K75 13.00— 48.0–52.7 61.2–64.9 59.2–68.7 K76 13.00— 52.8–55.1 65.0–71.9 — K77 13.00— 55.2–60.0 72.0–80.7 68.8–80.7 K78 13.00— — 80.8–92.7 80.8–92.7 K85 13.00— — 92.8–100.0 92.8–103.9 K86 13.00— — — 104.0–113.5 K87 13.00— — — 113.6–127.9 K89 13.00— — — 128.0–143.9 K92 13.00— — — 144.0–163.9 K94 13.00— — — 164.0–180.0 K96 13.0016-154Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

Replacement PartsStarters and Contactors – AC CoilsSelectionOrdering Information4th character of starter or contactor catalog number indicates model.AC Coils — For Class 14, 17, 18, 22, 25, 26, 30, 32, 36, 37, 40, 43, 83, 84, 87, 88VoltsSize Model 60Hz 50Hz Catalog Number List Price $24 24 75D73070J 67.00120 110 75D73070F 67.00110–120/220–240 110/190–220 75D73070A 67.00P 208 — 75D73070D 67.0000–2 1 ⁄2 S (ESP100) 220–240 190–220 75D73070G 67.00277 240 75D73070L 67.00220–240/440–480 190–220/380–440 75D73070C 67.00440–480 380–440 75D73070H 67.00575–600 550 75D73070E 67.0024 24 75D73251J 144.00120 110 75D73251F 144.00110–120/220–240 110/190–220 75D73251A 144.00P 208 — 75D73251D 144.003 , 3 1 ⁄2 S (ESP100) 220–240 190–220 75D73251G 144.00277 240 75D73251L 144.00220–240/440–480 190–220/380–440 75D73251C 144.00440–480 380–440 75D73251H 144.00575–600 550 75D73251E 144.0024 24 75D70131J 173.00120 110 75D70131F 173.00120/220–240 110/190–220 75D70131A 173.00G 208 — 75D70131D 173.004 T (ESP100) 220–240 190–220 75D70131G 173.00277 240 75D70131L 173.00220–240/440–480 190–220/380–440 75D70131C 173.00440–480 380–440 75D70131H 173.00575–600 550 75D70131E 173.0023-26 23-26 3RT1966-5AB31 176.00 110-127 110-127 3RT1966-5AF31 176.00 200-220 200-220 3RT1966-5AM31 176.00 4, 5 V (Vacuum) 220-240 220-240 3RT1966-5AP31 176.00 240-277 240-277 3RT1966-5AU31 176.00 380-420 380-420 3RT1966-5AV31 176.00 440-480 440-480 3RT1966-5AR31 176.00 575-600 575-600 3RT1966-5AT31 176.00 23-26 23-26 3RT1965-5AB31 165.00 110-127 110-127 3RT1965-5AF31 165.00 200-220 200-220 3RT1965-5AM31 165.00 5 P 220-240 220-240 3RT1965-5AP31 165.00 240-277 240-277 3RT1965-5AU31 165.00 380-420 380-420 3RT1965-5AV31 165.00 440-480 440-480 3RT1965-5AR31 165.00 575-600 575-600 3RT1965-5AT31 165.00 23-26 23-26 3RT1975-5AB31 213.00 110-127 110-127 3RT1975-5AF31 213.00 200-220 200-220 3RT1975-5AM31 213.00 6 P 220-240 220-240 3RT1975-5AP31 213.00 V (Vacuum) 240-277 240-277 3RT1975-5AU31 213.00 380-420 380-420 3RT1975-5AV31 213.00 440-480 440-480 3RT1975-5AR31 213.00 575-600 575-600 3RT1975-5AT31 213.00 16 CONTROLPRODUCTSNEMA & GeneralPurpose Control7 H 100-250 100-250 75ZAF750-70 587.00150-500 150-500 75ZAF750-71 587.008 H 100-250 100-250 75ZAF1650-70 1029.00 Discount Code: SIRIUS 3R, Contactors, OL's, MSP's. Set of 2 coils. Recommend to change printed circuitboard when changing coils. 49ZP1650 for List Price seepage 16-156.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-155

Replacement PartsStarters and Contactors – DC Coils, Late Break Aux Contacts, Rectifiers, Contact KitsSelectionOrdering Information 4th character of starter or contactor catalog number indicates model. DC Coils for Size 00-4 require Late Break Interlock.DC Coils — For Class 14, 17, 18, 22, 25, 26, 30, 32, 40, 43Note: For sizes 7 & 8 contactors the AC coils are used for DC see page 16-155.Size Model Volts DC Catalog Number List Price $12 75D73070R 99.0024 75D73070S 99.0032 75D73070T 99.0000–2 1 ⁄2 P48 75D73070U 99.00S (ESP 100)125 75D73070V 99.00250 75D73070W 99.0012 75D73251R 213.0024 75D73251S 213.0032 75D73251T 213.003, 3 1 ⁄2 P48 75D73251U 213.00S (ESP 100)125 75D73251V 213.00250 75D73251W 213.00448 75D70131U 338.00G125 75D70131V 338.00T (ESP 100)250 75D70131W 338.0023-26 3RT1966-5AB31 176.00 4, 5 V (Vacuum) 42-48 3RT1966-5AD31 176.00 110-127 3RT1966-5AF31 176.00 240-277 3RT1966-5AU31 176.00 Late Break Auxiliary ContactsControl Size Model Catalog Number List Price $Board for Size 8 ContactorControl Size Model Catalog Number List Price1600–4 P, G, S, T 49AB01LB 51.00 8 H 49ZP1650 1811.00CONTROLPRODUCTSNEMA & GeneralPurpose ControlContact Kits – Single Pole Stationary and Movable Contacts, Contact Spring ModelDescription Size Number of Poles in Kit (4th position in part number) Catalog Number List Price $Internal Aux Contact (00-1- 3 ⁄4) P, S 75AF14 20.0000 P, S 75BF14 22.000 P, S 75CF14 34.0011P, S 75DF14 45.001 3 ⁄4–1P P, S 75EF14 67.002 1 P, S 75FP14 81.002 1 ⁄2 1 P, S 75GP14 120.003 P, S 75HF14 144.003 1 1⁄2P, S 75IF14 223.004 1 G, T 75JG14 290.004 (Vacuum) 3 (Bottles) V, C 3RT1964-6V 1161.00Class 14, 17, 18, 22, 25, 5 3 P 3RT1966-6A 1054.0026, 30, 32, 36, 37, 40, 43, 5 (Vacuum) 3 (Bottles) V, C 3RT1966-6V 1704.0083, 84, 87, 88 6 3 P 3RT1976-6A 1395.006 (Vacuum) 3 (Bottles) V, C 3RT1976-6V 2130.0014, 407 3 H 49ZL750 4428.008 3 H 49ZL1650 5468.00 Discount Code: IEC. Discount Code: NEMA Control.16-156 On 3-phase controls, all 3-poles should be replaced -3 kits required.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Replacement PartsStarters and Contactors – Coil VA Ratings and Overload RelaysCoil VA RatingsSelectionDevice Type Contactor Size Amps Volts Number of Poles Total Inrush VA Total Sealed VANEMA StarterLighting ContactorMechanically Held (CLM)Lighting ContactorElectrically Held Held (LE)00 thru 2 1/2 — — — 218 253 thru 3 1/2 — — — 310 264 — — — 510 515 — — — 590 6.76 — — — 830 9.27 — — — 850 128 — — — 1900 484,5,6 (Vacuum) — — — 630 7.4— 20 — 2-12 6 625— 30 — 2-5 40 410— 60 — 2-3 40 410— 60 — 4-5 40 600— 100 - 200 — 2-3 200 900— 100 - 200 — 4-5 130 1300— 300 - 400 — 3 550 1600— 20 24 3 49.6 6.9— 20 120 3 51.3 6.57— 20 208 3 75.79 11.94— 20 240 3 86.78 14.25— 20 277 3 79.1 11.97— 20 480 3 83.7 12.9— 20 600 3 84.1 13.2— 20 24 12 73.31 12.66— 20 120 12 75.1 13.1— 20 208 12 73.97 13.25— 20 240 12 89.15 14.85— 20 277 12 78.55 12.77— 20 480 12 84 12.9— 20 600 12 81.9 13.4— 30 24 3 49.67 7.08— 30 120 3 51.94 6.48— 30 208 3 76.57 11.78— 30 240 3 64.44 8.99— 30 277 3 77.85 14.2— 30 480 3 83.6 13.1— 30 600 3 82.1 13.4— 60 24 3 74.94 13.16— 60 120 3 75.77 13.59— 60 208 3 78.73 12.05— 60 240 3 89.92 14.42— 60 277 3 84.89 12.93— 60 480 3 87.6 12.7— 60 600 3 85.4 13.8— 100 24 3 182.28 32.85— 100 120 3 191.42 32.26— 100 208 3 187.78 31.15— 100 240 3 215.32 35.63— 100 277 3 175.92 30.62— 100 480 3 198.2 34.8— 100 600 3 171.1 29.6— 200 All Voltages 3 300 5.8— 300 Electrically 3 590 6.7— 400 Held 3 830 9.2Overload Relays – For Class 14, 17, 18, 22, 25, 26, 30, 32, 83, 84, 87HalfAmbient Comp BimetalSize Size Model Number Poles Catalog Number (1) NC List Price $ Catalog Number (1) NO/NC List Price $00–1 — P1 48DC18AA3 116.003 48DC38AA3 120.00 48DC39AA3 155.001P — P 1 48EC18AA3 151.00— 1 3 ⁄4 P 3 48EC38AA3 155.00 48EC39AA3 191.002 — P1 48GC18AA3 165.003 48GC38AA3 169.00 48GC39AA3 205.00— 2 1 ⁄2 P1 48GC18AA3 165.003 48GC38AA3 169.00 48GC39AA3 205.003 — P 3 48HC38AA3 286.00— 3 1 ⁄2 P 3 48HC38AA3 286.004 — G 3 48JC38AA3 430.00For Starter and Contactor replacement parts not found in this section, please refer to Field Modification kits found starting on page 16-79. For replacement Solid State overload relays, please see the Overload Relay sectionfound starting on page 16-47. Includes overload mounting plate to be coupled to contactor mounting plate.16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-157

Replacement PartsLighting and Heating Contactors, Type LE, CLM, CMF, CMNAC Coils – 20-400 Amps3RT1955-5AF31SelectionContactorCatalog NumberListType Size 24VAC 120VAC 208VAC 240VAC 277VAC 480VAC 600VAC Price $20, 30, 60 Amp 75D70646J 75D70646F 75D70646D 75D70646G 75D70646L 75D70646H 75D70646E 56.00100 Amp 75D54772J 75D54772F 75D54772D 75D54772G 75D54772L 75D54772H 75D54772E 93.00LE 200 Amp 3RT1955-5AB31 3RT1955-5AF31 3RT1955-5AM31 3RT1955-5AP31 3RT1955-5AU31 3RT1955-5AR31 3RT1955-5AT31 133.00 300 Amp 3RT1965-5AB31 3RT1965-5AF31 3RT1965-5AM31 3RT1965-5AP31 3RT1965-5AU31 3RT1965-5AR31 3RT1965-5AT31 165.00 400 Amp 3RT1975-5AB31 3RT1975-5AF31 3RT1975-5AM31 3RT1975-5AP31 3RT1975-5AU31 3RT1975-5AR31 3RT1975-5AT31 213.00 Main Contacts (Includes 3 Moving and 6 Fixed Contacts)3RT1965-6AType Contactor Size Catalog Number List Price $20–100 Amp Not Replaceable —LE 200 Amp 3RT1956-6A 554.00 300 Amp 3RT1965-6A 847.00 400 Amp 3RT1975-6A 1193.00 Lighting Contact Assembly - 20 Amp (Power Poles)Catalog (Verify catalog number onType Contactor Size Number side of contact assembly) List Price $49LN02A, 2 NC Contacts Non-Stackable 101.00LE20 Amp49LN20A, 2 NO Contacts Non-Stackable 101.0049LS20A, 2 NO Contacts Stackable 101.0049LS10A, 1 NO Contact Stackable 101.00AC Coils 20 Amps Contactor Number 120V, 60Hz List 240V, 60Hz List 277V List 480V, 60Hz ListType Size of Poles 110V, 50Hz Price $ 208V, 50Hz Price $ 50/60Hz Price $ 440V, 50Hz Price $16CLM4097341CLM 20 Amp 2–12 CLM4097341 103.00 CLM4097342 103.00 CLM4097343 103.00 CLM4097344 103.00CONTROLPRODUCTSNEMA & GeneralPurpose ControlAC Coils 30–400 Amps CLMC4C120CLMGU3C120Catalog NumberContactor NumberListType Size of Poles 24V AC 120V AC 208V AC 220/240V AC 277V AC 480V AC 600V AC Price $2–3-Pole CLMC4C024 CLMC4C120 CLMC4C208 CLMC4C240 CLMC4C277 CLMC4C480 CLMC4C600 119.00CLM†C 30 Amp 4-Pole CLMC4C024 CLMC4C120 CLMC4C208 CLMC4C240 CLMC4C277 CLMC4C480 CLMC4C600 119.005-Pole CLMC5C024 CLMC5C120 CLMC5C208 CLMC5C240 CLMC5C277 CLMC5C480 CLMC5C600 119.002–3-Pole CLMD3C024 CLMD3C120 CLMD3C208 CLMD3C240 CLMD3C277 CLMD3C480 CLMD3C600 141.00CLM†D 60 Amp 4-Pole CLMD5C024 CLMD5C120 CLMD5C208 CLMD5C240 CLMD5C277 CLMD5C480 CLMD5C600 141.005-Pole CLMD5C024 CLMD5C120 CLMD5C208 CLMD5C240 CLMD5C277 CLMD5C480 CLMD5C600 141.00CLM†E2–3-Pole CLME3C024 CLME3C120 CLME3C208 CLME3C240 CLME3C277 CLME3C480 CLME3C600 237.00100, 2004-Pole CLME5C024 CLME5C120 CLME5C208 CLME5C240 CLME5C277 CLME5C480 CLME5C600 237.00Amp5-Pole CLME5C024 CLME5C120 CLME5C208 CLME5C240 CLME5C277 CLME5C480 CLME5C600 237.00CLM†G2–3-Pole — CLMGL3C120 CLMGL3C208 CLMGL3C240 CLMGL3C277 CLMGL3C480 CLMGL3C600 511.00Latching Coil 300 Amp2–3-Pole — CLMGU3C120 CLMGU3C208 CLMGU3C240 CLMGU3C277 CLMGU3C480 CLMGU3C600 511.00.Unlatch CoilCLM†H2–3-Pole — CLMHL3C120 CLMHL3C208 CLMHL3C240 CLMHL3C277 CLMHL3C480 CLMHL3C600 583.00Latching Coil 400 Amp2–3-Pole — CLMHU3C120 CLMHU3C208 CLMHU3C240 CLMHU3C277 CLMHU3C480 CLMHU3C600 583.00Unlatch CoilControl Module Rectifier Type Device Contactor Size Number of Poles Catalog Number List Price $CLMCLM†C toCLM†F30–200 Amps All CLMKCMR 167.00 Discount code: IEC. Coil kits for 20 amp CLM contactors include the coilclearing auxiliary contact. For 30–200 amp CLM contactors, in the event thateither the coil or the control module fails, it isrecommended that both be replaced.16-158Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Replacement PartsLighting Contactors, CLM, CMB, CMF, CMN & Combination Replacement HandlesSelectionOrdering InformationFor CLM: 5th character of contactor catalog number indicates Frame Size.For CMB, CMF, CMN: 4th character of contactor catalog number indicates Frame Size.Main Contacts 20 Amp Lighting ContactorsCLM4097334Contactor Number of Catalog ListType Size Poles Location Number Price $CLM20 AmpMain Contacts 30–400 Amp Lighting Contactors2 Top or Bottom CLM4097331 258.00 3 Top CLM4097332 290.00 4 Top or Bottom CLM4097333 355.00 6 Top or Bottom CLM4097334 419.00 Frame Contactor Number of Catalog ListType Size Size Poles Number Price $Auxiliary Contact Blocks 20 Amp Lighting Contactors Contactor Catalog ListType Size Contacts Number Price $CLMCD20 Amp30 Amp60 AmpCLM E 100 AmpFGH200 Amp300 Amp400 Amp2 CLMCCK02 133.003 CLMCCK03 192.004 CLMCCK04 223.005 CLMCCK05 268.002 CLMDCK02 155.003 CLMDCK03 252.004 CLMDCK04 533.005 CLMDCK05 564.002 CLMECK02 300.003 CLMECK03 449.004 CLMECK04 600.005 CLMECK05 752.002 CLMFCK02 578.003 CLMFCK03 863.004 CLMFCK04 1151.005 CLMFCK05 1438.002 CLMGCK02 1428.003 CLMGCK03 2118.002 CLMHCK02 2766.003 CLMHCK03 4152.001 Form C NO, NC Contact CLM4097291 97.00 2 Form C NO, NC Contacts CLM4097292 193.00 Auxiliary Contact Blocks 30–400 Amp Lighting ContactorsFrame Contactor Contact Catalog ListType Size Size Configuration Number Price $1 NO and 1 NC CLMFCAK11 71.00C to F 30–200 Amps2 NC CLMFCAK02 71.002 NO CLMFCAK20 71.001 Coil Clearing CLMFCCK11 71.00CLMNO and NC1 NO and 1 NC CLMHCAK11 71.00G to H 300–400 Amps2 NC CLMHCAK02 71.002 NO CLMHCAK20 71.001 Coil Clearing CLMHCCK11 71.00CLMFCAK11NO and NC16 CONTROLPRODUCTSNEMA & GeneralPurpose ControlCombination Starters Class 17, 18, 25, 26 & 32Replacement Handle AssembliesNEMA 1, 4, 12 Enclosure Class 17, 25, 32Disc Standard List Extra ListSize Width Price $ Wide Price $30-100A 75D68257103 269.00 75D68257103 269.00200A 75D68257105 269.00 — —NEMA 1, 4, 12 Enclosure Class 18, 26, 32Circuit Standard List Extra ListBreaker Width Price $ Wide Price $3-100A 75D68257080 269.00 75D68257080 269.00125A 75D68257096 269.00 — —150A 75D68257089 269.00 — — Maximum 1 block per contactor. Maximum 2 blocks per contactor.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-159

Definite Purpose ControlDefinite Purpose ContactorsClass 45General45CG10AJA 45CG20AF 45EG10AJA 45EG20AFBenefits▪ Power Termination Options▪ Compact Size▪ One Pole Version Includes Shunt Bar▪ Interchangeable Mounting Durable Metal Back Plate▪ Standard Class B Coil Insulation▪ Quiet Operation▪ Weld-resistant Silver Cadmium Oxide Contacts▪ Power Terminal Operations▪ Reinforced Thermalset Polyester Housing▪ Contact Covers and Taped Coils Come StandardClass 42CONTROLPRODUCTS1642AF35AF 42DF35AF 42FE35AF106 42HF35AFDefinitePurpose ControlBenefits▪ Compact Size▪ Interchangeable Mounting Durable Metal Back Plate▪ Power Terminations Options▪ Reinforced Thermalset Polyester Housing▪ Quiet OperationCommon Definite Purpose Applications▪ Air Conditioning▪ Heating▪ Ventilating▪ Refrigeration▪ Food and Beverage Industry▪ Conveyors▪ Weld-resistant Silver Cadmium Oxide Contacts▪ Optional Din Rail Mounting▪ Snap-on Electrical/Mechanical Interlocks▪ Visual Contact Position Indication▪ Low VA Coils Standard for 25A–40A▪ Elevators▪ Lighting▪ Pool and Spa▪ Welding▪ Pump and CompressorFor further products and dimensions see supplement catalog DPBR-18010-0905. New supplement catalog to be ready Summer 2007.16-160Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Definite Purpose ControlDefinite Purpose ContactorsSelectionOrdering InformationCoil Table Use complete catalog number. Replace the (*) with letter from the coil table. For additional information see Definite Purpose Catalog DPBR-18010-0905.60Hz 50Hz Voltage Letter24 24 J110–120 110 F200–208 — D208–240 190–220 G277 240 L440–480 380–440 H550–600 550 EClass 45120V 240V 277V 480V 600VNonInductiveFLA Hp LRA Hp LRA Hp LRA Hp LRA Hp Amps Poles Catalog No List Price $20 — 120 — 110 — 100 — 80 — 25 1 45CG10A*A 44.50 40.25 — 150 — 150 — 100 — 80 — 35 1 45DG10A*A 48.5030 — 180 — 180 — 150 — 120 — 40 1 45EG10A*A 55.00 49.35 — 200 — 180 — 150 — 120 — 50 1 45FG10A*A 61.00 54.40 — 240 — 240 — 200 — 160 — 55 1 45GG10A*A 66.0020 — — — 120 — 100 — 80 — 30 2 45CG20A* 66.00 59.25 — — — 150 — 125 — 100 — 35 2 45DG20A* 87.00 78.30 — — — 180 — 135 — 110 — 40 2 45EG20A* 96.00 85.35 — — — 200 — 135 — 110 — 50 2 45FG20A* 102.00 91.40 — — — 240 — 200 — 160 — 55 2 45GG20A* 107.00 96.Class 42 25–150 FLA 60Hz 600V AC Max120V 240V 277V 480V 600VNonInductiveFLA Hp LRA Hp LRA Hp LRA Hp LRA Hp Amps Poles Catalog No List Price $25 2 150 3 — — 125 — 100 — 35 2 42AF15A* 101.0025 — 150 5 — — 125 7.5 100 7.5 35 3 42AF35A* 117.00 104.25 — 150 5 — — 125 7.5 100 7.5 35 4 42AF25A* 158.00 141.30 2 180 5 — — 150 — 120 — 40 2 42BF15A* 122.00 109.30 — 180 7.5 — — 150 10 120 10 40 3 42BF35A* 130.00 116.30 — 180 7.5 — — 150 10 120 10 40 4 42BF25A* 172.00 1154.40 3 240 7.5 — — 200 — 160 — 50 2 42CF15A* 137.00 122.40 — 240 10 — — 200 15 160 15 50 3 42CF35A* 152.00 136.40 — 240 10 — — 200 15 160 15 50 4 42CF25A* 196.00 176.50 3 300 10 — — 250 — 200 — 63 2 42DF15A* 282.00 253.50 — 300 15 — — 250 30 200 30 63 3 42DF35A* 299.00 268.60 5 360 10 — — 300 — 240 — 75 2 42EF15A* 320.00 286.60 — 360 20 — — 300 40 240 40 75 3 42EF35A* 333.00 298.75 — 450 25 — — 375 — 300 — 93 2 42FE15A*106 383.00 343.75 — 450 25 — — 375 40 300 40 93 3 42FE35A*106 428.00 383.90 — 540 — — — 450 — 360 — 120 2 42GE15A*106 496.00 443.90 — 540 30 — — 450 60 360 60 120 3 42GE35A*106 536.00 479.120 — 720 — — — 600 — 480 — 150 2 42HF15A* 607.00 543.120 — 720 — — — 600 — 480 — 150 3 42HF35A* 660.00 591.150 — 900 — — — 750 — 600 — 160 2 42IF15A* 1172.00 1048.150 — 900 — — — 750 — 600 — 160 3 42IF35A* 1293.00 1156.16 CONTROLPRODUCTSDefinitePurpose ControlDiscount Schedule NEMASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-161

SIRIUS Soft StartersIntroductionOverviewProducts at a glance3RW30/3RW31 3RW40 3RW44Class 73/74 Enclosed16CONTROLPRODUCTSSoft StarterControlSIRIUS soft startersfor standard applicationsSIRIUS 3RW30 soft startersSIRIUS 3RW40 soft startersfor High Feature applicationsSIRIUS 3RW44 soft startersFor enclosed applicationsEnclosures in NEMA 1, 3, 4, & 12 typesUL/CSA listed1) 3RW30 single phase devices do not have ramp down functionality.• SIRIUS 3RW30/31 soft starters for soft starting and smoothramp-down of single-phase or three-phase asynchronous motors 1)• Rating range of up to 60 Hp at 460 V (50 °C ambient)• Application areas:-Fans-Pumps- Building/construction machines- Presses- Escalators- Transport systems- Air conditioning systems- Ventilators- Assembly lines- Compressors and coolers- Operating mechanisms• SIRIUS 3RW40 soft starters with integrated functions- solid-state motor overload and intrinsic device protection and- adjustable current limitingfor the soft starting and stopping of three-phase asynchronous motors• Rating range from 75 to 300 Hp at 460 V (50 °C ambient)• Application areas:-Fans-Pumps- Building/construction machines- Presses- Escalators- Transport systems- Air conditioning systems- Ventilators- Assembly lines- Compressors and coolers- Operating mechanisms• In addition to soft starting and soft ramp-down, the solid-stateSIRIUS 3RW44 soft starters provide numerous functions forhigher-level requirements• Rating range from - up to 600 Hp at 460 V in inline circuit• Application areas:-Pumps- Ventilators- Compressors- Cooling systems- Industrial refrigerating systems- Water transport- Conveying systems- Hydraulics- Machine tools- MillsOrder No.Page3RW30, 3RW31 16-1643RW40 16-1653RW44 16-166• Complete starter includes 3RW40 or 3RW44 and CPT Class 73/74 16-168/16-169• Combination options include circuit breaker or fusible DBC• Application areas:- Compressors-Pumps- Stamping presses- Cooling towers- Molding and extruding- Chippers and debarkers- Lumber processing- Pulp & paper processing- Conveyors-Textiles-HVAC16-162Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

SIRIUS Soft StartersGeneral DataOverviewThe advantages of the SIRIUS soft starters at a glance:• Soft starting and soft stop 1)• Stepless starting• Reduction of current peaks• Avoidance of mains voltage fluctuations during starting• Reduced load on the power supply network• Reduction of the mechanical load in the operating mechanism• Considerable space savings and reduced wiring comparedwith mechanical reduced voltage starters• Maintenance-free switching• Very easy handling• Fits perfectly in the SIRIUS modular systemSIRIUS 3RW30/31 SIRIUS 3RW40 SIRIUS 3RW44Standard applicationsHigh Feature applicationsRated current at 50 °C A 2.6 ... 85 117 ... 385 26 ... 1076Rated operating voltage V 200 ... 575 200 ... 600 200 ... 690Motor rating at 460 V• Inline circuitHp 1.1 ... 60 75 ... 300 15 ... 950• Inside-delta circuitHp – – 22 ... 600Temperature range °C -25 ... +60 -25 ... +60 0 ... +60Soft starting/ramp-down1)Voltage rampStarting/stopping voltage % 40 ... 100 40 ... 100 20 ... 100Starting and ramp-down time s 0...20 0...20 1 ... 360Torque control – –Starting/stopping torque % – – 20 ... 100Torque limit % – – 20 ... 200Ramp time s – – 1 ... 360Integral bypass contact system 2)Intrinsic device protection –Motor overload protection –Thermistor motor protection – –Adjustable current limiting –Inside-delta circuit – –Breakaway pulse – –Creep speed in both directions – –Pump ramp-down – – 6)DC braking – – 3) 6)Combined braking – – 3) 6)Motor heating – –Communication – – with PROFIBUS DP (option)External display and operator module – – (option )LCD Operating measured value display – –Error logbook – –Event list – –Slave pointer function – –Trace function – – 4)Programmable control inputs and outputs – –Number of parameter sets 1 (2 with 3RW31) 1 3Parameterization software (Softstarter ES) – –Power semiconductors (thyristors) 2 controlled phases 2 controlled phases 3 controlled phasesSpring-loaded terminals (only 3RW30 03)Screw terminalsUL/CSA 5)CE markingSoft starting under heavy starting conditions – – 6)Configuring support Win-SOFTSTARTER Technical Assistance 1-800-241-4453Function is available– Function not available1) Soft stop not available for 3RW31.2) Not available for 3RW30 03.3) Not possible in inside-delta circuit.4) Trace function with Softstarter ES software.5) For 3RW30 03 up to 230 V.6) Calculate soft starter and motor with size allowance where required.You can find further information on the Internet at:http://sielect.sea.siemens.com16 CONTROLPRODUCTSSoft StarterControlSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-163

SIRIUS Soft StartersStandard Applications—SIRIUS 3RW3 Soft StartersSelectionSelection and ordering data3RW30 03-2CB54Rated operatingvoltage U e3RW30 25-1AB143RW30 35-1AB143RW30 35-1AA12Atambient temperature 50 °CSizeOrder No. ListRated operatingRated output of three-phase inductionPrice $current I e motors for rated operating voltage U e115 V 200 V 230 V 460 V 575 VVAhp hp hp hp hpSoft starters for easy starting conditions and high operating frequencyWeight perPU approx.200 ... 400 2.6 - 0.5 0.5 - - 3RW30 03-@CB54 308.00 0.200kg16CONTROLPRODUCTSSoft StarterControlOrder No. extension for rated connection method 1) 1withscrew-type terminals22.5 mm1withspring-loaded terminals22.5 mm2Soft starters for three-phase asynchronous motors200 ... 460 4.8 - 1 1 3 - S00 3RW30 14-1CB@4 406.00 0.3027.8 - 2 2 5 - S00 3RW30 16-1CB@4 484.00 0.30511 - 3 3 7.5 - S0 3RW30 24-1AB@4 496.00 0.49014 - 3 3 10 - S0 3RW30 25-1AB@4 567.00 0.48121 - 5 5 15 - S0 3RW30 26-1AB@4 587.00 0.48927 - 7.5 7.5 20 - S2 3RW30 34-1AB@4 763.00 0.79432 - 7.5 10 20 - S2 3RW30 35-1AB@4 942.00 0.77938 - 10 10 25 - S2 3RW30 36-1AB@4 1177.00 0.79154 - 15 20 40 - S3 3RW30 44-1AB@4 1301.00 1.66064 - 20 20 40 - S3 3RW30 45-1AB@4 1639.00 1.80085 - 25 30 60 - S3 3RW30 46-1AB@4 1978.00 1.810460 ... 575 11 - - - 7.5 10 S0 3RW30 24-1AB@5 668.00 0.49014 - - - 10 10 S0 3RW30 25-1AB@5 723.00 0.48921 - - - 15 15 S0 3RW30 26-1AB@5 780.00 0.48927 - - - 20 25 S2 3RW30 34-1AB@5 916.00 0.79132 - - - 20 30 S2 3RW30 35-1AB@5 1132.00 0.79338 - - - 25 30 S2 3RW30 36-1AB@5 1412.00 0.79254 - - - 40 50 S3 3RW30 44-1AB@5 1561.00 1.66064 - - - 40 60 S3 3RW30 45-1AB@5 1967.00 1.81085 - - - 60 75 S32)3RW30 46-1AB@5 2375.00 1.800Order No. extension for rated control supply voltage U sAC/DC 24 VAC/DC 110 ... 230 VSoft starters with two-ramp control for three-phase induction motors with two speeds(double pole-reversing)200 ... 460 11 - 3 3 7.5 - S0 3RW31 24-1CB14 613.00 0.46814 - 3 3 10 - S0 3RW31 25-1CB14 657.00 0.47521 - 5 5 15 - S0 3RW31 26-1CB14 722.00 0.464460 ... 575 11 - - - 7.5 10 S0 3RW31 24-1CB15 735.00 0.46714 - - - 10 10 S0 3RW31 25-1CB15 795.00 0.47621 - - - 15 15 S0 3RW31 26-1CB15 858.00 0.475Soft starters for single-phase motors115 ... 240 21 1.5 3 3 - - S0 3RW30 26-1AA12 313.00 0.43932 2 5 5 - - S2 3RW30 35-1AA12 501.00 0.72964 5 10 10 - - S3 3RW30 45-1AA12 864.00 1.3901) Units have removable terminals.2) 3RW30 46-1AB05 soft starters (AC/DC 24 V version):Delivery time on request.Selection of the soft starter depends on the motor’s ratedcurrent.The SIRIUS 3RW3 solid-state soft starters are designed for easystarting conditions. J Load < 10 x J Motor . In the event of deviatingconditions or increased switching frequency, it may be necessaryto choose a larger unit. Siemens recommends the use of theselection and simulation program Win-Soft starter. See Technicalspecifications for information about rated currents for ambienttemperatures >50 °C.0116-164Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule NEMA

SIRIUS Soft StartersStandard Applications—SIRIUS 3RW40 Soft StartersSelectionOverviewSIRIUS 3RW40SIRIUS 3RW40 soft starters have all the same advantages as the3RW30/31 soft starters including soft start and soft stop, 1) andinternal bypass. At the same time they come with additionalfunctions, i.e. selectable solid-state motor overload, intrinsicdevice protection and adjustable current limiting, as well as anew patented two-phase control method (Polarity Balancing)that is unique in this rating range.SIRIUS 3RW40 soft starters are part of the SIRIUS modularsystem. This results in advantages such as identical sizes and auniform connection system. Thanks to their particularly compactdesign, SIRIUS 3RW40 soft starters are only half as big ascomparable wye-delta starters. Hence they can be mounted incompact space requirements in the control cabinet. Configuringand installation are carried out quickly and easily thanks to the3-wire connection.SIRIUS 3RW40 for three-phase motorsSoft starters rated up to 300 Hp (at 460 V) for standardapplications in three-phase power systems. Extremely smallsizes, low power losses and simple commissioning are just threeof the many advantages of the SIRIUS 3RW40 soft starters.Area of applicationThe SIRIUS 3RW40 solid-state soft starters are suitable for softstarting and stopping of three-phase asynchronous motors.Using the patented two-phase control, the current is kept atminimum values in all three phases throughout the entire startingtime and typical direct current components are eliminated. Thisnot only enables the two-phase starting of motors up to 300 Hp(at 460 V) but also avoids the current and torque peaks whichoccur i.e. with wye-delta starters or other mechanical starters.Application areas•Fans•Pumps• Building/construction machines• Presses• Escalators• Transport systems• Air conditioning systems• Ventilators• Assembly lines• Compressors and coolers• Operating mechanismsApplicable standards• IEC 60947-2• UL/CSA #E1431123RW40 56-6BB44Ambient temperature 50 °C 3) Size Order No. ListRated operating Rated output of three-phase induction motors for ratedPrice $current I e operating voltage U e200 V 230 V 460 V 575 VA hp hp hp hpInline circuit, rated operating voltage 200 ... 460 VOrder No. extension for connection method• with spring-loaded terminals• with screw-type terminals2)Order No. extension for the rated control supply voltage U s• 115 V AC• 230 V AC1) Soft stop not available on 3RW31.2) Control by way of the internal 24 V DC supply and direct control by meansof PLC possible.3) For other temperature ratings, see the Industrial Controls catalogCPPC-06000-0806.Selection of the soft starter depends on the motor's ratedcurrent.Approx. weightper PU117 30 40 75 – S6 3RW40 55-@BB@4 2237.00 5.700145 40 50 100 – 3RW40 56-@BB@4 2460.00 5.700205 60 75 150 – S12 3RW40 73-@BB@4 2879.00 7.000248 75 100 200 – 3RW40 74-@BB@4 3243.00 7.000315 100 125 250 – 3RW40 75-@BB@4 3578.00 7.000385 125 1250 300 – 3RW40 76-@BB@4 4585.00 7.000Inline circuit, rated operating voltage 400 ... 600 V117 – – 75 100 S6 3RW40 55-@BB@5 2573.00 5.700145 – – 100 150 3RW40 56-@BB@5 2829.00 5.700205 – – 150 200 S12 3RW40 73-@BB@5 3321.00 7.000248 – – 200 250 3RW40 74-@BB@5 3735.00 7.000315 – – 250 300 3RW40 75-@BB@5 4115.00 7.000385 – – 300 400 3RW40 76-@BB@5 5278.00 7.000263RW40 76-6BB4434The SIRIUS 3RW40 solid-state soft starters are designed foreasy starting conditions. J Load < 10xJ Motor . In the event ofdeviating conditions or increased duty cycle, it may benecessary to choose a larger device. Siemens recommends theuse of the selection and simulation program Win-SOFTSTARTER.16 CONTROLPRODUCTSSoft StarterControlDiscount Schedule IECSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-165

SIRIUS Soft StartersHigh Feature Applications—SIRIUS 3RW44 Soft StartersSelection and ordering dataOverviewSIRIUS 3RW44In addition to soft starting and soft stopping, the solid-stateSIRIUS 3RW44 soft starters provide numerous functions forhigher-level requirements. They cover a rating range up to900Hp at 460 V in the inline circuit 1) .The SIRIUS 3RW44 soft starters are characterized by a compactdesign for space-saving and clearly arranged control cabinetlayouts. For optimized motor starting and stopping, theinnovative SIRIUS 3RW44 soft starters are an attractivealternative with considerable savings potential compared toapplications with a frequency converter. The new torque controland adjustable current limiting enable these high feature softstarters to be used in nearly every conceivable task. Theyreliably mitigate the sudden torque applications and currentpeaks during motor starting and stopping. This creates savingspotential when calculating the size of the controlgear and whenservicing the machinery installed. Be it for inline circuits orinside-delta circuits – the SIRIUS 3RW44 soft starter offerssavings especially in terms of size and equipment costs.Combinations of various starting, operating and ramp-downpossibilities ensure an optimum adaptation to the applicationspecificrequirements. Operating and commissioning can beperformed by means of the user-friendly keypad and a menuprompted,multi-line graphic display with background lighting.The optimized motor ramp-up and ramp-down can be effectedby means of just a few settings with a previously selectedlanguage. Four-key operation and plain-text displays for eachmenu point guarantee full clarity at every moment of theparameterization and operation.Applicable standards• IEC 60947-4-2 • UL/CSA #E143112Area of applicationThe SIRIUS 3RW44 solid-state soft starters are suitable for thetorque-controlled soft starting and smooth ramp-down as well asbraking of three-phase asynchronous motors.Application areas, e.g.• Pumps• Mills• Ventilators• Saws• Compressors• Crushers• Water transport• Mixers• Conveying systems and lifts • Centrifuges• Hydraulics• Industrial cooling and• refrigerating systems1) Current range available up to 600Hp at 460 V.Selection16CONTROLPRODUCTSSoft StarterControl3RW44 27-1BC443RW44 36-6BC441) For other temperature ratings, see technical information in 2006 IndustrialCatalog CPPC-06000-0106.3RW44 47-6BC44Ambient temperature 50 °C 1) Order No. ListRated operating Rated output of three-phase induction motors for rated operatingPrice $current I e voltage U e200 V 230 V 460 V 575 VApprox. weightper PUA hp hp hp hp kgInline circuit, rated operating voltage 200 ... 460 V26 7.5 7.5 15 – 3RW44 22-@ BC@ 4 2337.00 4.90032 10 10 20 – 3RW44 23-@ BC@ 4 2472.00 4.90042 10 15 25 – 3RW44 24-@ BC@ 4 2494.00 4.90051 15 15 30 – 3RW44 25-@ BC@ 4 2963.00 4.90068 20 20 50 – 3RW44 26-@ BC@ 4 3109.00 4.90082 25 25 60 – 3RW44 27-@ BC@ 4 3735.00 4.900Order No. extension for connection method• with spring-loaded terminals 3• with screw-type terminals 1100 30 30 75 – 3RW44 34-@ BC@ 4 4406.00 7.900117 30 40 75 – 3RW44 35-@ BC@ 4 4652.00 7.900145 40 50 100 – 3RW44 36-@ BC@ 4 6039.00 7.900180 50 60 125 – 3RW44 43-@ BC@ 4 6565.00 10.300215 60 75 150 – 3RW44 44-@ BC@ 4 6922.00 10.300280 75 100 200 – 3RW44 45-@ BC@ 4 7503.00 10.300315 100 125 250 – 3RW44 46-@ BC@ 4 8342.00 10.300385 125 150 300 – 3RW44 47-@ BC@ 4 9282.00 10.300494 150 200 400 – 3RW44 53-@ BC@ 4 10959.00 50.000551 150 200 450 – 3RW44 54-@ BC@ 4 12580.00 50.000615 200 250 500 – 3RW44 55-@ BC@ 4 13979.00 50.000693 200 250 550 – 3RW44 56-@ BC@ 4 15656.00 50.000780 250 300 600 – 3RW44 57-@ BC@ 4 19570.00 50.000Order No. extension for connection method• with spring-loaded terminals 2• with screw-type terminals 6Order No. extension for the rated control supply voltage U s• 115 V AC• 230 V AC3416-166Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule IEC

SIRIUS Soft StartersHigh Feature Applications—SIRIUS 3RW44 Soft StartersSelectionSelection and ordering data3RW44 27-1BC443RW44 36-6BC441) Control by way of the internal 24 V DC supply and direct control by meansof PLC possible.2) For other temperature ratings, see technical information in the IndustrialControls Catalog CPPC-06000-0803.Soft starter selection depends on the motor's rated current.3RW44 47-6BC44Ambient temperature 50 °C 2) Order No. ListRated operating Rated output of three-phase induction motors for rated operatingPrice $current I e voltage U e200 V 230 V 460 V 575 VApprox. weightper PUA hp hp hp hp kgInline circuit, rated operating voltage 400 ... 600 V2632––––152020253RW44 22-@BC@53RW44 23-@BC@52695.002852.004.9004.90042 – – 25 30 3RW44 24-@BC@5 2874.00 4.90051 – – 30 40 3RW44 25-@BC@5 3410.00 4.90068 – – 50 50 3RW44 26-@BC@5 3578.00 4.90082 – – 60 75 3RW44 27-@BC@5 4305.00 4.900Order No. extension for connection method• with spring-loaded terminals 3• with screw-type terminals1100117––––7575751003RW44 34-@BC@53RW44 35-@BC@55077.005356.007.9007.900145 – – 100 125 3RW44 36-@BC@5 6945.00 7.900180215––––1251501502003RW44 43-@BC@53RW44 44-@BC@57559.007962.0010.30010.300280 – – 200 250 3RW44 45-@BC@5 8633.00 10.300315 – – 250 300 3RW44 46-@BC@5 9595.00 10.300385 – – 300 400 3RW44 47-@BC@5 10680.00 10.300494551––––4004505005503RW44 53-@BC@43RW44 54-@BC@412603.0014470.0050,00050,000615 – – 500 600 3RW44 55-@BC@4 16081.00 50,000693 – – 550 700 3RW44 56-@BC@4 18004.00 50,000780 – – 600 800 3RW44 57-@BC@4 22510.00 50,000Order No. extension for connection method• with spring-loaded terminals 2• with screw-type terminals 61)Order No. extension for the rated control supply voltage U s• 115 V AC3• 230 V AC 4The 3RW44 solid-state soft starters are designed for normalstarting (class 10). (Inertia load of the overall operatingmechanism J Load 40 °C andoperating frequency.16 CONTROLPRODUCTSSoft StarterControlDiscount Schedule IECSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-167

Control ProductsEnclosed 3RW40Selection3RW40 Enclosed features:▪ Available in NEMA 1, 12, 3R, 4, and 4stainless steel▪ Compact size▪ Built-in bypass contactor▪ Voltage ramp up and ramp down▪ Current limit adjustment of 125 - 550%▪ Internal overload class 10, 15, or 20▪ Internal self protection▪ Fault monitoringOrdering Information Enclosed devices should be ordered bythe FLA of the motor. The 3RW40 is designed for normalstarting applications (Class 10applications). For factory modifications see page 16-177. For complete derating and application infosee the 2006 Industrial Controls catalogCPPC-06000-0106. For dimensional drawings see page 16-178.Class 73 non-combination starters include:▪ NEMA rated enclosure▪ 3RW40 Sirius softstarter with built-in OLand bypass▪ Control circuit transformer▪ Line side power terminal block▪ Reset buttonFor all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.Ideal applications for 3RW40 enclosedsoftstarters:▪ Fans▪ Pumps▪ Building/construction machines▪ Presses▪ Escalators▪ Transport systems▪ Air conditioning systems▪ Ventilators▪ Assembly lines▪ Compressors and chillersThe 3RW40 severe duty rating table shouldbe applied for high inertia applicationssuch rock crushers, chippers, screwcompressors, ect.Class 73 starters are built to UL and CSAstandards.16CONTROLPRODUCTS3RW40 for Standard ApplicationsEnclosed Non-Combination (Starter Only)RatedMAX HP KW Class 10 Light Duty (350% * Ie for 10s) Operating OPEN Style List List List List NEMA 4/4X ListCurrent 200V 230V 460V 575V 380V (Starter Only) NEMA 1 Price $ NEMA 3R Price $ NEMA 12 Price $ NEMA 4 Price $ Stainless Steel Price $117 30 40 75 — 56 3RW4055-6BB34 73AS3_BFA 4700.00 73AS3_DFA 4700.00 73AS3_0FA 4700.00 73AS3_EFA 5000.00 73AS3_WFA 5800.00145 40 50 100 — 75 3RW4056-6BB34 73BS3_BFA 5100.00 73BS3_DFA 5200.00 73BS3_0FA 5100.00 73BS3_EFA 5400.00 73BS3_WFA 6300.00205 60 75 150 — 112 3RW4073-6BB34 73CS3_BFA 5700.00 73CS3_DFA 5600.00 73CS3_0FA 5700.00 73CS3_EFA 6000.00 73CS3_WFA 6800.00248 75 100 200 — 149 3RW4074-6BB34 73DS3_BFA 6100.00 73DS3_DFA 6100.00 73DS3_0FA 6100.00 73DS3_EFA 6500.00 73DS3_WFA 7300.00315 100 125 250 — 186 3RW4075-6BB34 73ES3_BFA 6800.00 73ES3_DFA 6800.00 73ES3_0FA 6800.00 73ES3_EFA 7200.00 73ES3_WFA 7900.00385 125 150 300 — 224 3RW4076-6BB34 73FS3_BFA 8900.00 73FS3_DFA 8900.00 73FS3_0FA 8900.00 73FS3_EFA 9400.00 73FS3_WFA 11800.00200V 6 6 6 6 6230V 2 2 2 2 2380V 3 3 3 3 3460V 4 4 4 4 4117 — — 75 100 — 3RW4055-6BB35 73AS35BFA 5000.00 73AS35DFA 5100.00 73AS350FA 5000.00 73AS35EFA 5100.00 73AS35WFA 6200.00145 — — 100 150 — 3RW4056-6BB35 73BS35BFA 5500.00 73BS35DFA 5600.00 73BS350FA 5500.00 73BS35EFA 5800.00 73BS35WFA 6700.00205 — — 150 200 — 3RW4073-6BB35 73CS35BFA 6200.00 73CS35DFA 6200.00 73CS350FA 6200.00 73CS35EFA 6600.00 73CS35WFA 7400.00248 — — 200 250 — 3RW4074-6BB35 73DS35BFA 6700.00 73DS35DFA 6600.00 73DS350FA 6700.00 73DS35EFA 7100.00 73DS35WFA 7800.00315 — — 250 300 — 3RW4075-6BB35 73ES35BFA 7500.00 73ES35DFA 7200.00 73ES350FA 7500.00 73ES35EFA 7900.00 73ES35WFA 8600.00385 — — 300 400 — 3RW4076-6BB35 73FS35BFA 9800.00 73FS35DFA 9800.00 73FS350FA 9800.00 73FS35EFA 10300.00 73FS35WFA 12600.00Soft StarterControlEnclosed Non-Combination (Starter Only)RatedMAX HP KW Class 20 Severe Duty (350% * Ie for 20s) Operating OPEN Style List List List List NEMA 4/4X ListCurrent 200V 230V 460V 575V 380V (Starter Only) NEMA 1 Price $ NEMA 3R Price $ NEMA 12 Price $ NEMA 4 Price $ Stainless Steel Price $112 30 40 75 — 56 3RW4055-6BB34 73AS3_BFA 4700.00 73AS3_DFA 4700.00 73AS3_0FA 4700.00 73AS3_EFA 5000.00 73AS3_WFA 5800.00132 40 50 100 — 75 3RW4056-6BB34 73BS3_BFA 5100.00 73BS3_DFA 5200.00 73BS3_0FA 5100.00 73BS3_EFA 5400.00 73BS3_WFA 6300.00185 60 60 125 — 93 3RW4073-6BB34 73CS3_BFA 5700.00 73CS3_DFA 5600.00 73CS3_0FA 5700.00 73CS3_EFA 6000.00 73CS3_WFA 6800.00205 60 75 150 — 112 3RW4074-6BB34 73DS3_BFA 6100.00 73DS3_DFA 6100.00 73DS3_0FA 6100.00 73DS3_EFA 6500.00 73DS3_WFA 7300.00280 75 100 200 — 149 3RW4075-6BB34 73ES3_BFA 6800.00 73ES3_DFA 6800.00 73ES3_0FA 6800.00 73ES3_EFA 7200.00 73ES3_WFA 7900.00340 100 125 250 — 186 3RW4076-6BB34 73FS3_BFA 8900.00 73FS3_DFA 8900.00 73FS3_0FA 8900.00 73FS3_EFA 9400.00 73FS3_WFA 11800.00200V 6 6 6 6 6230V 2 2 2 2 2380V 3 3 3 3 3460V 4 4 4 4 4112 — — 75 75 — 3RW4055-6BB35 73AS35BFA 5000.00 73AS35DFA 5100.00 73AS350FA 5000.00 73AS35EFA 5100.00 73AS35WFA 6200.00132 — — 100 125 — 3RW4056-6BB35 73BS35BFA 5500.00 73BS35DFA 5600.00 73BS350FA 5500.00 73BS35EFA 5800.00 73BS35WFA 6700.00185 — — 125 150 — 3RW4073-6BB35 73CS35BFA 6200.00 73CS35DFA 6200.00 73CS350FA 6200.00 73CS35EFA 6600.00 73CS35WFA 7400.00205 — — 150 200 — 3RW4074-6BB35 73DS35BFA 6700.00 73DS35DFA 6600.00 73DS350FA 6700.00 73DS35EFA 7100.00 73DS35WFA 7800.00280 — — 200 250 — 3RW4075-6BB35 73ES35BFA 7500.00 73ES35DFA 7200.00 73ES350FA 7500.00 73ES35EFA 7900.00 73ES35WFA 8600.00340 — — 250 300 — 3RW4076-6BB35 73FS35BFA 9800.00 73FS35DFA 9800.00 73FS350FA 9800.00 73FS35EFA 10300.00 73FS35WFA 12600.00 Starter size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.HPs are for reference only. Enclosed ratings are at 40°C. Starter selection is dependent on type of application. Ie = FLA rating of motor.16-168Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule IEC

Control ProductsEnclosed 3RW40Selection3RW40 Enclosed features:▪ Available in NEMA 1, 12, 3R, 4, and 4stainless steel▪ Compact size▪ Built-in bypass contactor▪ Voltage ramp up and ramp down▪ Current limit adjustment of 125 - 550%▪ Internal overload class 10, 15, or 20▪ Internal self protection▪ Fault monitoringOrdering Information Enclosed devices should be ordered bythe FLA of the motor. The 3RW40 is designed for normalstarting applications (Class 10applications). For factory modifications see page 16-177. For complete derating and application infosee the 2006 Industrial Controls catalogCPPC-06000-0106. For dimensional drawings see page 16-178.Class 74 non-combination starters include:▪ NEMA rated enclosure▪ Circuit breaker disconnect with shunt trip▪ 3RW40 Sirius softstarter with built-in OLand bypass▪ Control circuit transformerFor all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.Ideal applications for 3RW40 enclosedsoftstarters:▪ Fans▪ Pumps▪ Building/construction machines▪ Presses▪ Escalators▪ Transport systems▪ Air conditioning systems▪ Ventilators▪ Assembly lines▪ Compressors and chillersThe 3RW40 severe duty rating table shouldbe applied for high inertia applicationssuch rock crushers, chippers, screwcompressors, ect.Class 74 starters are built to UL and CSAstandards.3RW40 for Standard ApplicationsEnclosed Circuit Breaker Combination (Starter with Circuit Breaker Disconnect)RatedMAX HP KW Class 10 Light Duty (350% * Ie for 10s) Operating OPEN Style List List List List NEMA 4/4X ListCurrent 200V 230V 460V 575V 380V (Starter Only) NEMA 1 Price $ NEMA 3R Price $ NEMA 12 Price $ NEMA 4 Price $ Stainless Steel Price $117 30 40 75 — 56 3RW4055-6BB34 74AS3_BFAP 6300.00 74AS3_DFAP 6300.00 74AS3_0FAP 6300.00 74AS3_EFAP 6700.00 74AS3_WFAP 9500.00145 40 50 100 — 75 3RW4056-6BB34 74BS3_BFAP 6900.00 74BS3_DFAP 6900.00 74BS3_0FAP 6900.00 74BS3_EFAP 7300.00 74BS3_WFAP 10100.00205 60 75 150 — 112 3RW4073-6BB34 74CS3_BFAP 8100.00 74CS3_DFAP 8100.00 74CS3_0FAP 8100.00 74CS3_EFAP 8600.00248 75 100 200 — 149 3RW4074-6BB34 74DS3_BFAP 8500.00 74DS3_DFAP 8500.00 74DS3_0FAP 8500.00 74DS3_EFAP 9000.00315 100 125 250 — 186 3RW4075-6BB34 74ES3_BFAP 10700.00 74ES3_DFAP 10700.00 74ES3_0FAP 10700.00 74ES3_EFAP 11300.00385 125 150 300 — 224 3RW4076-6BB34 74FS3_BFAP 12200.00 74FS3_DFAP 12200.00 74FS3_0FAP 12200.00 74FS3_EFAP 12900.00200V 6 6 6 6 6230V 2 2 2 2 2380V 3 3 3 3 3460V 4 4 4 4 4117 — — 75 100 — 3RW4055-6BB35 74AS35BFAP 6700.00 74AS35DFAP 6600.00 74AS350FAP 6600.00 74AS35EFAP 7000.00 74AS35WFAP 9900.00145 — — 100 150 — 3RW4056-6BB35 74BS35BFAP 7300.00 74BS35DFAP 7300.00 74BS350FAP 7300.00 74BS35EFAP 7700.00 74BS35WFAP 10600.00205 — — 150 200 — 3RW4073-6BB35 74CS35BFAP 8300.00 74CS35DFAP 8600.00 74CS350FAP 8600.00 74CS35EFAP 9100.00248 — — 200 250 — 3RW4074-6BB35 74DS35BFAP 9100.00 74DS35DFAP 9000.00 74DS350FAP 9000.00 74DS35EFAP 9500.00315 — — 250 300 — 3RW4075-6BB35 74ES35BFAP 11400.00 74ES35DFAP 11400.00 74ES350FAP 11400.00 74ES35EFAP 12000.00385 — — 300 400 — 3RW4076-6BB35 74FS35BFAP 12200.00 74FS35DFAP 12200.00 74FS350FAP 12200.00 74FS35EFAP 13800.0016 CONTROLPRODUCTSEnclosed Circuit Breaker Combination (Starter with Circuit Breaker Disconnect)RatedMAX HP KW Class 20 Severe Duty (350% * Ie for 20s) Operating OPEN Style List List List List NEMA 4/4X ListCurrent 200V 230V 460V 575V 380V (Starter Only) NEMA 1 Price $ NEMA 3R Price $ NEMA 12 Price $ NEMA 4 Price $ Stainless Steel Price $112 30 40 75 — 56 3RW4055-6BB34 74AS3_BFAP 6300.00 74AS3_DFAP 6300.00 74AS3_0FAP 6300.00 74AS3_EFAP 6700.00 74AS3_WFAP 9500.00132 40 50 100 — 75 3RW4056-6BB34 74BS3_BFAP 6900.00 74BS3_DFAP 6900.00 74BS3_0FAP 6900.00 74BS3_EFAP 7300.00 74BS3_WFAP 10100.00185 60 60 125 — 93 3RW4073-6BB34 74CS3_BFAP 8100.00 74CS3_DFAP 8100.00 74CS3_0FAP 8100.00 74CS3_EFAP 8600.00205 60 75 150 — 112 3RW4074-6BB34 74DS3_BFAP 8500.00 74DS3_DFAP 8500.00 74DS3_0FAP 8500.00 74DS3_EFAP 9000.00280 75 100 200 — 149 3RW4075-6BB34 74ES3_BFAP 10700.00 74ES3_DFAP 10700.00 74ES3_0FAP 10700.00 74ES3_EFAP 11300.00340 100 125 250 — 186 3RW4076-6BB34 74FS3_BFAP 12200.00 74FS3_DFAP 12200.00 74FS3_0FAP 12200.00 74FS3_EFAP 12900.00200V 6 6 6 6 6230V 2 2 2 2 2380V 3 3 3 3 3460V 4 4 4 4 4112 — — 75 75 — 3RW4055-6BB35 74AS35BFAP 6700.00 74AS35DFAP 6600.00 74AS350FAP 6600.00 74AS35EFAP 7000.00 74AS35WFAP 9900.00132 — — 100 125 — 3RW4056-6BB35 74BS35BFAP 7300.00 74BS35DFAP 7300.00 74BS350FAP 7300.00 74BS35EFAP 7700.00 74BS35WFAP 10600.00185 — — 125 150 — 3RW4073-6BB35 74CS35BFAP 8300.00 74CS35DFAP 8600.00 74CS350FAP 8600.00 74CS35EFAP 9100.00205 — — 150 200 — 3RW4074-6BB35 74DS35BFAP 9100.00 74DS35DFAP 9000.00 74DS350FAP 9000.00 74DS35EFAP 9500.00280 — — 200 250 — 3RW4075-6BB35 74ES35BFAP 11400.00 74ES35DFAP 11400.00 74ES350FAP 11400.00 74ES35EFAP 12000.00340 — — 250 300 — 3RW4076-6BB35 74FS35BFAP 12200.00 74FS35DFAP 12200.00 74FS350FAP 12200.00 74FS35EFAP 13800.00Soft StarterControl Starter size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.HPs are for reference only. Enclosed ratings are at 40°C. Starter selection is dependent on type of application. Ie = FLA rating of motor.Discount Schedule IECSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-169

Control ProductsEnclosed 3RW403RW40 Enclosed features:▪ Available in NEMA 1, 12, 3R, 4, and 4stainless steel▪ Compact size▪ Built-in bypass contactor▪ Voltage ramp up and ramp down▪ Current limit adjustment of 125 - 550%▪ Internal overload class 10, 15, or 20▪ Internal self protection▪ Fault monitoringOrdering Information Enclosed devices should be ordered bythe FLA of the motor. The 3RW40 is designed for normalstarting applications (Class 10applications). For factory modifications see page 16-177. For complete derating and application infosee the 2006 Industrial Controls catalogCPPC-06000-0106. For dimensional drawings see page 16-178.Class 74 combination starters include:▪ NEMA rated enclosure▪ Fusible disconnect▪ 3RW40 Sirius softstarter with built-in OLand bypass▪ Control circuit transformerSelectionIdeal applications for 3RW40 enclosedsoftstarters:▪ Fans▪ Pumps▪ Building/construction machines▪ Presses▪ Escalators▪ Transport systems▪ Air conditioning systems▪ Ventilators▪ Assembly lines▪ Compressors and chillersThe 3RW40 severe duty rating table shouldbe applied for high inertia applicationssuch rock crushers, chippers, screwcompressors, ect.Class 74 starters are built to UL and CSAstandards.For all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.3RW40 for Standard ApplicationsEnclosed Fusible Combination (Starter with Fusible Disconnect)16CONTROLPRODUCTSRatedMAX HP KW Class 10 Light Duty (350% * Ie for 10s) Operating OPEN Style List List List List NEMA 4/4X ListCurrent 200V 230V 460V 575V 380V (Starter Only) NEMA 1 Price $ NEMA 3R Price $ NEMA 12 Price $ NEMA 4 Price $ Stainless Steel Price $117 30 40 75 — 56 3RW4055-6BB34 74AS3_BFAF 5700.00 74AS3_DFAF 5700.00 74AS3_0FAF 5700.00 74AS3_EFAF 6000.00 74AS3_WFAF 8900.00145 40 50 100 — 75 3RW4056-6BB34 74BS3_BFAF 7200.00 74BS3_DFAF 7200.00 74BS3_0FAF 7200.00 74BS3_EFAF 7600.00 74BS3_WFAF 10400.00205 60 75 150 — 112 3RW4073-6BB34 74CS3_BFAF 8300.00 74CS3_DFAF 8200.00 74CS3_0FAF 8200.00 74CS3_EFAF 8700.00248 75 100 200 — 149 3RW4074-6BB34 74DS3_BFAF 8700.00 74DS3_DFAF 8700.00 74DS3_0FAF 8700.00 74DS3_EFAF 9200.00315 100 125 250 — 186 3RW4075-6BB34 74ES3_BFAF 10900.00 74ES3_DFAF 10900.00 74ES3_0FAF 10900.00 74ES3_EFAF 11500.00385 125 150 300 — 224 3RW4076-6BB34 74FS3_BFAF 12300.00 74FS3_DFAF 12400.00 74FS3_0FAF 12300.00 74FS3_EFAF 13000.00200V 6 6 6 6 6230V 2 2 2 2 2380V 3 3 3 3 3460V 4 4 4 4 4117 — — 75 100 — 3RW4055-6BB35 74AS35BFAF 6100.00 74AS35DFAF 6000.00 74AS350FAF 6100.00 74AS35EFAF 6300.00 74AS35WFAF 9300.00145 — — 100 150 — 3RW4056-6BB35 74BS35BFAF 7700.00 74BS35DFAF 7600.00 74BS350FAF 7700.00 74BS35EFAF 8000.00 74BS35WFAF 10900.00205 — — 150 200 — 3RW4073-6BB35 74CS35BFAF 8500.00 74CS35DFAF 8800.00 74CS350FAF 8800.00 74CS35EFAF 9300.00248 — — 200 250 — 3RW4074-6BB35 74DS35BFAF 9200.00 74DS35DFAF 9200.00 74DS350FAF 9200.00 74DS35EFAF 9700.00315 — — 250 300 — 3RW4075-6BB35 74ES35BFAF 11600.00 74ES35DFAF 11600.00 74ES350FAF 11600.00 74ES35EFAF 12200.00385 — — 300 400 — 3RW4076-6BB35 74FS35BFAF 12200.00 74FS35DFAF 12200.00 74FS350FAF 12200.00 74FS35EFAF 13900.00Soft StarterControlEnclosed Fusible Combination (Starter with Fusible Disconnect)RatedMAX HP KW Class 20 Severe Duty (350% * Ie for 20s) Operating OPEN Style List List List List NEMA 4/4X ListCurrent 200V 230V 460V 575V 380V (Starter Only) NEMA 1 Price $ NEMA 3R Price $ NEMA 12 Price $ NEMA 4 Price $ Stainless Steel Price $112 30 40 75 — 56 3RW4055-6BB34 74AS3_BFAF 5700.00 74AS3_DFAF 5700.00 74AS3_0FAF 5700.00 74AS3_EFAF 6000.00 74AS3_WFAF 8900.00132 40 50 100 — 75 3RW4056-6BB34 74BS3_BFAF 7200.00 74BS3_DFAF 7200.00 74BS3_0FAF 7200.00 74BS3_EFAF 7600.00 74BS3_WFAF 10400.00185 60 60 125 — 93 3RW4073-6BB34 74CS3_BFAF 8300.00 74CS3_DFAF 8200.00 74CS3_0FAF 8200.00 74CS3_EFAF 8700.00205 60 75 150 — 112 3RW4074-6BB34 74DS3_BFAF 8700.00 74DS3_DFAF 8700.00 74DS3_0FAF 8700.00 74DS3_EFAF 9200.00280 75 100 200 — 149 3RW4075-6BB34 74ES3_BFAF 10900.00 74ES3_DFAF 10900.00 74ES3_0FAF 10900.00 74ES3_EFAF 11500.00340 100 125 250 — 186 3RW4076-6BB34 74FS3_BFAF 12300.00 74FS3_DFAF 12400.00 74FS3_0FAF 12300.00 74FS3_EFAF 13000.00200V 6 6 6 6 6230V 2 2 2 2 2380V 3 3 3 3 3460V 4 4 4 4 4112 — — 75 75 — 3RW4055-6BB35 74AS35BFAF 6100.00 74AS35DFAF 6000.00 74AS350FAF 6100.00 74AS35EFAF 6300.00 74AS35WFAF 9300.00132 — — 100 125 — 3RW4056-6BB35 74BS35BFAF 7700.00 74BS35DFAF 7600.00 74BS350FAF 7700.00 74BS35EFAF 8000.00 74BS35WFAF 10900.00185 — — 125 150 — 3RW4073-6BB35 74CS35BFAF 8500.00 74CS35DFAF 8800.00 74CS350FAF 8800.00 74CS35EFAF 9300.00205 — — 150 200 — 3RW4074-6BB35 74DS35BFAF 9200.00 74DS35DFAF 9200.00 74DS350FAF 9200.00 74DS35EFAF 9700.00280 — — 200 250 — 3RW4075-6BB35 74ES35BFAF 11600.00 74ES35DFAF 11600.00 74ES350FAF 11600.00 74ES35EFAF 12200.00340 — — 250 300 — 3RW4076-6BB35 74FS35BFAF 12200.00 74FS35DFAF 12200.00 74FS350FAF 12200.00 74FS35EFAF 13900.00 Starter size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.HPs are for reference only. Enclosed ratings are at 40°C. Starter selection is dependent on type of application. Ie = FLA rating of motor.16-170Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule IEC

Control ProductsEnclosed 3RW44SelectionEnclosed Non-Combination (Starter Only)Ordering Information Enclosed devices should be ordered bythe FLA of the motor. The 3RW44 is designed for normalstarting applications. For factory modifications see page 16-177. For complete derating and application infosee the 2006 Industrial Controls catalogCPPC-06000-0106. For dimensional drawings see page 16-178.Class 73 non-combination starters include:▪ NEMA rated enclosure▪ 3RW44 Sirius softstarter with built-in OLand bypass▪ Control circuit transformer3RW44 Enclosed features:▪ Available in NEMA 1, 12, 3R, 4, and 4stainless steel▪ Compact size▪ Built-in bypass contactor▪ Multiple starting/stopping techniquesincluding torque control▪ Internal overload class 5, 10, 15, 20, or 30▪ Built-in graphical LCD keypad▪ Internal self protection▪ Fault monitoring▪ 3 parameter sets▪ Communication capable via opt. Profibusmodule▪ Programmable inputs and outputs▪ External keypad availableFor all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.3RW44 For High Feature ApplicationsIdeal applications for 3RW44 enclosedsoftstarters:▪ Fans▪ Pumps▪ Conveying systems and lifts▪ Hydraulics▪ Machine tools▪ Mills saws▪ Crushers and grinders▪ Mixers▪ HVAC systemsThe 3RW44 severe duty rating table shouldbe applied for high inertia applicationssuch rock crushers, chippers, screwcompressors, ect.Class 73 starters are built to UL and CSAstandards.RatedMAX HP KW Class 10 Light Duty (350% * Ie for 10s) Operating OPEN Style List List List List NEMA 4/4X ListCurrent 200V 230V 460V 575V 380V (Starter Only) NEMA 1 Price $ NEMA 3R Price $ NEMA 12 Price $ NEMA 4 Price $ Stainless Steel Price $26 7.5 7.5 15 — 12 3RW4422-1BC34 73AT3_BFA 3800.00 73AT3_DFA 3700.00 73AT3_0FA 3800.00 73AT3_EFA 3900.00 73AT3_WFA 4200.0032 10 10 20 — 15 3RW4423-1BC34 73BT3_BFA 4000.00 73BT3_DFA 3900.00 73BT3_0FA 4000.00 73BT3_EFA 4200.00 73BT3_WFA 4400.0042 10 15 25 — 19 3RW4424-1BC34 73CT3_BFA 4300.00 73CT3_DFA 4300.00 73CT3_0FA 4300.00 73CT3_EFA 4600.00 73CT3_WFA 4800.0051 15 15 30 — 22 3RW4425-1BC34 73DT3_BFA 4600.00 73DT3_DFA 4500.00 73DT3_0FA 4600.00 73DT3_EFA 4900.00 73DT3_WFA 5000.0068 20 25 50 — 37 3RW4426-1BC34 73ET3_BFA 4800.00 73ET3_DFA 4800.00 73ET3_0FA 4800.00 73ET3_EFA 5100.00 73ET3_WFA 5200.0082 25 30 60 — 45 3RW4427-1BC34 73FT3_BFA 5200.00 73FT3_DFA 5300.00 73FT3_0FA 5200.00 73FT3_EFA 5500.00 73FT3_WFA 6400.00100 30 30 75 — 56 3RW4434-6BC34 73GT3_BFA 6100.00 73GT3_DFA 6100.00 73GT3_0FA 6000.00 73GT3_EFA 6300.00 73GT3_WFA 7100.00117 30 40 75 — 56 3RW4435-6BC34 73HT3_BFA 6800.00 73HT3_DFA 6800.00 73HT3_0FA 6700.00 73HT3_EFA 7100.00 73HT3_WFA 7900.00145 40 50 100 — 75 3RW4436-6BC34 73JT3_BFA 7600.00 73JT3_DFA 7600.00 73JT3_0FA 7600.00 73JT3_EFA 8000.00 73JT3_WFA 8700.00180 60 60 125 — 93 3RW4443-6BC34 73KT3_BFA 8800.00 73KT3_DFA 8800.00 73KT3_0FA 8800.00 73KT3_EFA 9300.00 73KT3_WFA 9900.00215 60 75 150 — 112 3RW4444-6BC34 73LT3_BFA 9600.00 73LT3_DFA 9600.00 73LT3_0FA 9600.00 73LT3_EFA 10100.00 73LT3_WFA 10800.00280 75 100 200 — 149 3RW4445-6BC34 73MT3_BFA 11900.00 73MT3_DFA 11800.00 73MT3_0FA 11800.00 73MT3_EFA 12400.00 73MT3_WFA 14700.00315 100 125 250 — 186 3RW4446-6BC34 73NT3_BFA 13300.00 73NT3_DFA 13300.00 73NT3_0FA 13300.00 73NT3_EFA 13900.00 73NT3_WFA 16100.00385 125 150 300 — 224 3RW4447-6BC34 73PT3_BFA 15000.00 73PT3_DFA 14900.00 73PT3_0FA 14900.00 73PT3_EFA 15700.00 73PT3_WFA 17800.00494 150 200 400 — 298 3RW4453-6BC34 73QT_BFA 73QT_DFA 73QT_0FA 73QT_EFA551 150 200 450 — 336 3RW4454-6BC34 73RT_BFA 73RT_DFA 73RT_0FA 73RT_EFA615 200 250 500 — 373 3RW4455-6BC34 73ST_BFA 73ST_DFA 73ST_0FA 73ST_EFAAVAILABILITY 693 200 250 550 — 3RW4456-6BC34 73TT_BFA TO 73TT_DFA BE 73TT_0FANNOUNCED73TT_EFA780 200 250 600 — 447 3RW4457-6BC34 73WT_BFA 73WT_DFA 73WT_0FA 73WT_EFA200V 6 6 6 6 6230V 2 2 2 2 2380V 3 3 3 3 3460V 4 4 4 4 426 — — 15 20 — 3RW4422-1BC35 73AT35BFA 4000.00 73AT35DFA 4000.00 73AT350FA 4000.00 73AT35EFA 4200.00 73AT35WFA 4400.0032 — — 20 25 — 3RW4423-1BC35 73BT35BFA 4300.00 73BT35DFA 4300.00 73BT350FA 4300.00 73BT35EFA 4600.00 73BT35WFA 4700.0042 — — 25 30 — 3RW4424-1BC35 73CT35BFA 4700.00 73CT35DFA 4600.00 73CT350FA 4700.00 73CT35EFA 5000.00 73CT35WFA 5100.0051 — — 30 40 — 3RW4425-1BC35 73DT35BFA 5000.00 73DT35DFA 4900.00 73DT350FA 4900.00 73DT35EFA 5300.00 73DT35WFA 5400.0068 — — 50 50 — 3RW4426-1BC35 73ET35BFA 5300.00 73ET35DFA 5200.00 73ET350FA 5300.00 73ET35EFA 5600.00 73ET35WFA 5700.0082 — — 60 75 — 3RW4427-1BC35 73FT35BFA 5700.00 73FT35DFA 5800.00 73FT350FA 5700.00 73FT35EFA 6000.00 73FT35WFA 6900.00100 — — 75 75 — 3RW4434-6BC35 73GT35BFA 6600.00 73GT35DFA 6700.00 73GT350FA 6600.00 73GT35EFA 7000.00 73GT35WFA 7700.00117 — — 75 100 — 3RW4435-6BC35 73HT35BFA 7400.00 73HT35DFA 7500.00 73HT350FA 7400.00 73HT35EFA 7800.00 73HT35WFA 8500.00145 — — 100 125 — 3RW4436-6BC35 73JT35BFA 8400.00 73JT35DFA 8400.00 73JT350FA 8400.00 73JT35EFA 8900.00 73JT35WFA 9500.00180 — — 125 150 — 3RW4443-6BC35 73KT35BFA 9700.00 73KT35DFA 9600.00 73KT350FA 9700.00 73KT35EFA 10200.00 73KT35WFA 10800.00215 — — 150 200 — 3RW4444-6BC35 73LT35BFA 10700.00 73LT35DFA 10600.00 73LT350FA 10700.00 73LT35EFA 11300.00 73LT35WFA 11800.00280 — — 200 250 — 3RW4445-6BC35 73MT35BFA 13100.00 73MT35DFA 13100.00 73MT350FA 13100.00 73MT35EFA 13800.00 73MT35WFA 16000.00315 — — 250 300 — 3RW4446-6BC35 73NT35BFA 14800.00 73NT35DFA 14700.00 73NT350FA 14700.00 73NT35EFA 15500.00 73NT35WFA 17600.00385 — — 300 400 — 3RW4447-6BC35 73PT35BFA 16600.00 73PT35DFA 16600.00 73PT350FA 16600.00 73PT35EFA 17500.00 73PT35WFA 19500.00494 — — 400 500 — 3RW4453-6BC35 73QT35BFA 73QT35DFA 73QT350FA 73QT35EFA551 — — 450 600 — 3RW4454-6BC35 73RT35BFA 73RT35DFA 73RT350FA 73RT35EFA615 — — 500 700 — 3RW4455-6BC35 73ST35BFA 73ST35DFA 73ST350FA 73ST35EFAAVAILABILITY 693 — — 550 750 — 3RW4456-6BC35 73TT35BFA TO 73TT35DFABE 73TT350FANNOUNCED73TT35EFA780 — — 600 850 — 3RW4457-6BC35 73WT35BFA 73WT35DFA 73WT350FA 73WT35EFA Starter size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.HPs are for reference only. Enclosed ratings are at 40°C. Starter selection is dependent on type of application. Ie = FLA rating of motor.16 CONTROLPRODUCTSSoft StarterControlDiscount Schedule IECSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-171

Control ProductsEnclosed 3RW44SelectionEnclosed Non-Combination (Starter Only)Ordering Information Enclosed devices should be ordered bythe FLA of the motor. The 3RW44 is designed for normalstarting applications. For factory modifications see page 16-177. For complete derating and application infosee the 2006 Industrial Controls catalogCPPC-06000-0106. For dimensional drawings see page 16-178.Class 73 non-combination starters include:▪ NEMA rated enclosure▪ 3RW44 Sirius softstarter with built-in OLand bypass▪ Control circuit transformer▪ Line side power terminal block▪ Reset button3RW44 Enclosed features:▪ Available in NEMA 1, 12, 3R, 4, and 4stainless steel▪ Compact size▪ Built-in bypass contactor▪ Multiple starting/stopping techniquesincluding torque control▪ Internal overload class 10, 15, or 20▪ Built-in graphical LCD keypad▪ Internal self protection▪ Fault monitoring▪ 3 parameter sets▪ Communication capable via opt. Profibusmodule▪ Programmable inputs and outputs▪ External keypad availableFor all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.3RW44 For High Feature ApplicationsIdeal applications for 3RW44 enclosedsoftstarters:▪ Fans▪ Pumps▪ Conveying systems and lifts▪ Hydraulics▪ Machine tools▪ Mills saws▪ Crushers and grinders▪ Mixers▪ HVAC systemsThe 3RW44 severe duty rating table shouldbe applied for high inertia applicationssuch rock crushers, chippers, screwcompressors, ect.Class 73 starters are built to UL and CSAstandards.16CONTROLPRODUCTSSoft StarterControlRatedMAX HP KW Class 20 Severe Duty (350% * Ie for 20s) Operating OPEN Style List List List List NEMA 4/4X ListCurrent 200V 230V 460V 575V 380V (Starter Only) NEMA 1 Price $ NEMA 3R Price $ NEMA 12 Price $ NEMA 4 Price $ Stainless Steel Price $26 7.5 7.5 15 — 12 3RW4422-1BC34 73AT3_BFA 3800.00 73AT3_DFA 3700.00 73AT3_0FA 3800.00 73AT3_EFA 3900.00 73AT3_WFA 4200.0032 10 10 20 — 15 3RW4423-1BC34 73BT3_BFA 4000.00 73BT3_DFA 3900.00 73BT3_0FA 4000.00 73BT3_EFA 4200.00 73BT3_WFA 4400.0042 10 15 25 — 19 3RW4424-1BC34 73CT3_BFA 4300.00 73CT3_DFA 4300.00 73CT3_0FA 4300.00 73CT3_EFA 4600.00 73CT3_WFA 4800.0051 15 15 30 — 22 3RW4425-1BC34 73DT3_BFA 4600.00 73DT3_DFA 4500.00 73DT3_0FA 4600.00 73DT3_EFA 4900.00 73DT3_WFA 5000.0068 20 25 50 — 37 3RW4426-1BC34 73ET3_BFA 4800.00 73ET3_DFA 4800.00 73ET3_0FA 4800.00 73ET3_EFA 5100.00 73ET3_WFA 5200.0082 25 30 60 — 45 3RW4427-1BC34 73FT3_BFA 5200.00 73FT3_DFA 5300.00 73FT3_0FA 5200.00 73FT3_EFA 5500.00 73FT3_WFA 6400.0097 30 30 60 — 45 3RW4434-6BC34 73GT3_BFA 6100.00 73GT3_DFA 6100.00 73GT3_0FA 6000.00 73GT3_EFA 6300.00 73GT3_WFA 7100.00113 30 40 75 — 56 3RW4435-6BC34 73HT3_BFA 6800.00 73HT3_DFA 6800.00 73HT3_0FA 6700.00 73HT3_EFA 7100.00 73HT3_WFA 7900.00134 40 50 75 — 56 3RW4436-6BC34 73JT3_BFA 7600.00 73JT3_DFA 7600.00 73JT3_0FA 7600.00 73JT3_EFA 8000.00 73JT3_WFA 8700.00175 50 60 100 — 75 3RW4443-6BC34 73KT3_BFA 8800.00 73KT3_DFA 8800.00 73KT3_0FA 8800.00 73KT3_EFA 9300.00 73KT3_WFA 9900.00195 60 75 125 — 93 3RW4444-6BC34 73LT3_BFA 9600.00 73LT3_DFA 9600.00 73LT3_0FA 9600.00 73LT3_EFA 10100.00 73LT3_WFA 10800.00243 75 75 150 — 112 3RW4445-6BC34 73MT3_BFA 11900.00 73MT3_DFA 11800.00 73MT3_0FA 11800.00 73MT3_EFA 12400.00 73MT3_WFA 14700.00263 75 100 200 — 149 3RW4446-6BC34 73NT3_BFA 13300.00 73NT3_DFA 13300.00 73NT3_0FA 13300.00 73NT3_EFA 13900.00 73NT3_WFA 16100.00326 100 125 250 — 186 3RW4447-6BC34 73PT3_BFA 15000.00 73PT3_DFA 14900.00 73PT3_0FA 14900.00 73PT3_EFA 15700.00 73PT3_WFA 17800.00494 150 150 400 — 298 3RW4453-6BC34 73QT_BFA 73QT_DFA 73QT_0FA 73QT_EFA551 150 200 450 — 336 3RW4454-6BC34 73RT_BFA 73RT_DFA 73RT_0FA 73RT_EFA615 200 200 500 — 373 3RW4455-6BC34 73ST_BFA 73ST_DFA 73ST_0FA 73ST_EFAAVAILABILITY 634 200 250 500 — 373 3RW4456-6BC34 73TT_BFA TO 73TT_DFA BE 73TT_0FANNOUNCED73TT_EFA650 200 250 550 — 373 3RW4457-6BC34 73WT_BFA 73WT_DFA 73WT_0FA 73WT_EFA200V 6 6 6 6 6230V 2 2 2 2 2380V 3 3 3 3 3460V 4 4 4 4 426 — — 15 20 — 3RW4422-1BC35 73AT35BFA 4000.00 73AT35DFA 4000.00 73AT350FA 4000.00 73AT35EFA 4200.00 73AT35WFA 4400.0032 — — 20 25 — 3RW4423-1BC35 73BT35BFA 4300.00 73BT35DFA 4300.00 73BT350FA 4300.00 73BT35EFA 4600.00 73BT35WFA 4700.0042 — — 25 30 — 3RW4424-1BC35 73CT35BFA 4700.00 73CT35DFA 4600.00 73CT350FA 4700.00 73CT35EFA 5000.00 73CT35WFA 5100.0051 — — 30 40 — 3RW4425-1BC35 73DT35BFA 5000.00 73DT35DFA 4900.00 73DT350FA 4900.00 73DT35EFA 5000.00 73DT35WFA 5400.0068 — — 50 50 — 3RW4426-1BC35 73ET35BFA 5300.00 73ET35DFA 5200.00 73ET350FA 5300.00 73ET35EFA 5600.00 73ET35WFA 5700.0082 — — 60 75 — 3RW4427-1BC35 73FT35BFA 5700.00 73FT35DFA 5800.00 73FT350FA 5700.00 73FT35EFA 6000.00 73FT35WFA 6900.0097 — — 60 75 — 3RW4434-6BC35 73GT35BFA 6600.00 73GT35DFA 6700.00 73GT350FA 6600.00 73GT35EFA 7000.00 73GT35WFA 7700.00113 — — 75 100 — 3RW4435-6BC35 73HT35BFA 7400.00 73HT35DFA 7500.00 73HT350FA 7400.00 73HT35EFA 7800.00 73HT35WFA 8500.00134 — — 75 125 — 3RW4436-6BC35 73JT35BFA 8400.00 73JT35DFA 8400.00 73JT350FA 8400.00 73JT35EFA 8900.00 73JT35WFA 9500.00175 — — 100 150 — 3RW4443-6BC35 73KT35BFA 9700.00 73KT35DFA 9600.00 73KT350FA 9700.00 73KT35EFA 10200.00 73KT35WFA 10800.00195 — — 125 200 — 3RW4444-6BC35 73LT35BFA 10700.00 73LT35DFA 10600.00 73LT350FA 10700.00 73LT35EFA 11300.00 73LT35WFA 11800.00243 — — 150 200 — 3RW4445-6BC35 73MT35BFA 13100.00 73MT35DFA 13100.00 73MT350FA 13100.00 73MT35EFA 13800.00 73MT35WFA 16000.00263 — — 200 250 — 3RW4446-6BC35 73NT35BFA 14800.00 73NT35DFA 14700.00 73NT350FA 14700.00 73NT35EFA 15500.00 73NT35WFA 17600.00326 — — 250 300 — 3RW4447-6BC35 73PT35BFA 16600.00 73PT35DFA 16600.00 73PT350FA 16600.00 73PT35EFA 17500.00 73PT35WFA 19500.00494 — — 400 500 — 3RW4453-6BC35 73QT35BFA 73QT35DFA 73QT350FA 73QT35EFA551 — — 450 550 — 3RW4454-6BC35 73RT35BFA 73RT35DFA 73RT350FA 73RT35EFA615 — — 500 600 — 3RW4455-6BC35 73ST35BFA 73ST35DFA 73ST350FA 73ST35EFAAVAILABILITY 693 — — 550 650 — 3RW4456-6BC35 73TT35BFA TO 73TT35DFABE 73TT350FANNOUNCED73TT35EFA780 — — 600 700 — 3RW4457-6BC35 73WT35BFA 73WT35DFA 73WT350FA 73WT35EFA Starter size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.HPs are for reference only. Enclosed ratings are at 40°C. Starter selection is dependent on type of application. Ie = FLA rating of motor.16-172Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule IEC

Control ProductsEnclosed 3RW44SelectionEnclosed Combination with Circuit Breaker DisconnectOrdering Information Enclosed devices should be ordered bythe FLA of the motor. The 3RW44 is designed for normalstarting applications. For factory modifications see page 16-177. For complete derating and application infosee the 2006 Industrial Controls catalogCPPC-06000-0106. For dimensional drawings see page 16-178.Class 74 non-combination starters include:▪ NEMA rated enclosure▪ 3RW44 Sirius softstarter with built-in OLand bypass▪ Circuit breaker with disconnect▪ Control circuit transformer▪ Reset button3RW44 Enclosed features:▪ Available in NEMA 1, 12, 3R, 4, and 4stainless steel▪ Compact size▪ Built-in bypass contactor▪ Multiple starting/stopping techniquesincluding torque control▪ Internal overload class 5, 10, 15, 20, or 30▪ Built-in graphical LCD keypad▪ Internal self protection▪ Fault monitoring▪ 3 parameter sets▪ Communication capable via opt. Profibusmodule▪ Programmable inputs and outputs▪ External keypad availableFor all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.3RW44 For High Feature ApplicationsIdeal applications for 3RW44 enclosedsoftstarters:▪ Fans▪ Pumps▪ Conveying systems and lifts▪ Hydraulics▪ Machine tools▪ Mills saws▪ Crushers and grinders▪ Mixers▪ HVAC systemsThe 3RW44 severe duty rating table shouldbe applied for high inertia applicationssuch rock crushers, chippers, screwcompressors, ect.Class 74 starters are built to UL and CSAstandards.RatedMAX HP KW Class 10 Light Duty (350% * Ie for 10s) Operating OPEN Style List List List List NEMA 4/4X ListCurrent 200V 230V 460V 575V 380V (Starter Only) NEMA 1 Price $ NEMA 3R Price $ NEMA 12 Price $ NEMA 4 Price $ Stainless Steel Price $26 7.5 7.5 15 — 12 3RW4422-1BC34 74AT3_BFAP 4700.00 74AT3_DFAP 4700.00 74AT3_0FAP 4700.00 74AT3_EFAP 5000.00 74AT3_WFAP 5700.0032 10 10 20 — 15 3RW4423-1BC34 74BT3_BFAP 4900.00 74BT3_DFAP 4900.00 74BT3_0FAP 4900.00 74BT3_EFAP 5200.00 74BT3_WFAP 5900.0042 10 15 25 — 19 3RW4424-1BC34 74CT3_BFAP 5000.00 74CT3_DFAP 5000.00 74CT3_0FAP 5000.00 74CT3_EFAP 5300.00 74CT3_WFAP 6000.0051 15 15 30 — 22 3RW4425-1BC34 74DT3_BFAP 5500.00 74DT3_DFAP 5500.00 74DT3_0FAP 5500.00 74DT3_EFAP 5800.00 74DT3_WFAP 7100.0068 20 25 50 — 37 3RW4426-1BC34 74ET3_BFAP 5800.00 74ET3_DFAP 5800.00 74ET3_0FAP 5800.00 74ET3_EFAP 6100.00 74ET3_WFAP 7300.0082 25 30 60 — 45 3RW4427-1BC34 74FT3_BFAP 6400.00 74FT3_DFAP 6400.00 74FT3_0FAP 6400.00 74FT3_EFAP 6800.00 74FT3_WFAP 7700.00100 30 30 75 — 56 3RW4434-6BC34 74GT3_BFAP 6800.00 74GT3_DFAP 6800.00 74GT3_0FAP 6800.00 74GT3_EFAP 7200.00 74GT3_WFAP 8100.00117 30 40 75 — 56 3RW4435-6BC34 74HT3_BFAP 7900.00 74HT3_DFAP 7900.00 74HT3_0FAP 7900.00 74HT3_EFAP 8300.00 74HT3_WFAP 11100.00145 40 50 100 — 75 3RW4436-6BC34 74JT3_BFAP 8400.00 74JT3_DFAP 8400.00 74JT3_0FAP 8400.00 74JT3_EFAP 8900.00 74JT3_WFAP 11300.00180 60 60 125 — 93 3RW4443-6BC34 74KT3_BFAP 10300.00 74KT3_DFAP 10300.00 74KT3_0FAP 10300.00 74KT3_EFAP 10900.00215 60 75 150 — 112 3RW4444-6BC34 74LT3_BFAP 11400.00 74LT3_DFAP 11400.00 74LT3_0FAP 11400.00 74LT3_EFAP 12000.00280 75 100 200 — 149 3RW4445-6BC34 74MT3_BFAP 14500.00 74MT3_DFAP 14500.00 74MT3_0FAP 14500.00 74MT3_EFAP 15300.00315 100 125 250 — 186 3RW4446-6BC34 74NT3_BFAP 16000.00 74NT3_DFAP 16100.00 74NT3_0FAP 16000.00 74NT3_EFAP 16800.00385 125 150 300 — 224 3RW4447-6BC34 74PT3_BFAP 17600.00 74PT3_DFAP 17700.00 74PT3_0FAP 17600.00 74PT3_EFAP 18500.00494 150 200 400 — 298 3RW4453-6BC34 73QT_BFAP 73QT_DFAP 73QT_0FAP 73QT_EFAP551 150 200 450 — 336 3RW4454-6BC34 73RT_BFAP 73RT_DFAP 73RT_0FAP 73RT_EFAP615 200 250 500 — 373 3RW4455-6BC34 73ST_BFAP 73ST_DFAP 73ST_0FAP 73ST_EFAPAVAILABILITY 693 200 250 550 — 3RW4456-6BC34 73TT_BFAP TO 73TT_DFAPBE 73TT_0FAP ANNOUNCED73TT_EFAP780 200 250 600 — 447 3RW4457-6BC34 73WT_BFAP 73WT_DFAP 73WT_0FAP 73WT_EFAP200V 6 6 6 6 6230V 2 2 2 2 2380V 3 3 3 3 3460V 4 4 4 4 426 — — 15 20 — 3RW4422-1BC35 74AT35BFAP 5000.00 74AT35DFAP 5000.00 74AT350FAP 5000.00 74AT35EFAP 5300.00 74AT35WFAP 6000.0032 — — 20 25 — 3RW4423-1BC35 74BT35BFAP 5200.00 74BT35DFAP 5200.00 74BT350FAP 5200.00 74BT35EFAP 5600.00 74BT35WFAP 6200.0042 — — 25 30 — 3RW4424-1BC35 74CT35BFAP 5400.00 74CT35DFAP 5300.00 74CT350FAP 5300.00 74CT35EFAP 5700.00 74CT35WFAP 6300.0051 — — 30 40 — 3RW4425-1BC35 74DT35BFAP 5900.00 74DT35DFAP 5900.00 74DT350FAP 5900.00 74DT35EFAP 6200.00 74DT35WFAP 7500.0068 — — 50 50 — 3RW4426-1BC35 74ET35BFAP 6300.00 74ET35DFAP 6200.00 74ET350FAP 6200.00 74ET35EFAP 6600.00 74ET35WFAP 7800.0082 — — 60 75 — 3RW4427-1BC35 74FT35BFAP 6900.00 74FT35DFAP 6900.00 74FT350FAP 6900.00 74FT35EFAP 7300.00 74FT35WFAP 8100.00100 — — 75 75 — 3RW4434-6BC35 74GT35BFAP 7400.00 74GT35DFAP 7400.00 74GT350FAP 7300.00 74GT35EFAP 7800.00 74GT35WFAP 8600.00117 — — 75 100 — 3RW4435-6BC35 74HT35BFAP 8500.00 74HT35DFAP 8500.00 74HT350FAP 8500.00 74HT35EFAP 9000.00 74HT35WFAP 11800.00145 — — 100 125 — 3RW4436-6BC35 74JT35BFAP 9100.00 74JT35DFAP 9200.00 74JT350FAP 9200.00 74JT35EFAP 9400.00 74JT35WFAP 12100.00180 — — 125 150 — 3RW4443-6BC35 74KT35BFAP 11200.00 74KT35DFAP 11200.00 74KT350FAP 11200.00 74KT35EFAP 11800.00215 — — 150 200 — 3RW4444-6BC35 74LT35BFAP 12500.00 74LT35DFAP 12500.00 74LT350FAP 12500.00 74LT35EFAP 13200.00280 — — 200 250 — 3RW4445-6BC35 74MT35BFAP 15800.00 74MT35DFAP 15800.00 74MT350FAP 15800.00 74MT35EFAP 16600.00315 — — 250 300 — 3RW4446-6BC35 74NT35BFAP 17400.00 74NT35DFAP 17500.00 74NT350FAP 17400.00 74NT35EFAP 18400.00385 — — 300 400 — 3RW4447-6BC35 74PT35BFAP 19300.00 74PT35DFAP 19400.00 74PT350FAP 19300.00 74PT35EFAP 20300.00494 — — 400 500 — 3RW4453-6BC35 73QT35BFAPP 73QT35DFAP 73QT350FAP 73QT35EFAP551 — — 450 600 — 3RW4454-6BC35 73RT35BFAPP 73RT35DFAP 73RT350FAP 73RT35EFAP615 — — 500 700 — 3RW4455-6BC35 73ST35BFAPP 73ST35DFAP 73ST350FAP 73ST35EFAPAVAILABILITY 693 — — 550 750 — 3RW4456-6BC35 73TT35BFAPP TO 73TT35DFAPBE 73TT350FAP ANNOUNCED73TT35EFAP780 — — 600 850 — 3RW4457-6BC35 73WT35BFAPP 73WT35DFAP 73WT350FAP 73WT35EFAP Starter size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.HPs are for reference only. Enclosed ratings are at 40°C. Starter selection is dependent on type of application. Ie = FLA rating of motor.16 CONTROLPRODUCTSSoft StarterControlDiscount Schedule IECSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-173

Control ProductsEnclosed 3RW44SelectionEnclosed Combination with Circuit Breaker DisconnectOrdering Information Enclosed devices should be ordered bythe FLA of the motor. The 3RW44 is designed for normalstarting applications. For factory modifications see page 16-177. For complete derating and application infosee the 2006 Industrial Controls catalogCPPC-06000-0106. For dimensional drawings see page 16-178.Class 74 non-combination starters include:▪ NEMA rated enclosure▪ 3RW44 Sirius softstarter with built-in OLand bypass▪ Circuit breaker with disconnect▪ Control circuit transformer▪ Reset button3RW44 Enclosed features:▪ Available in NEMA 1, 12, 3R, 4, and 4stainless steel▪ Compact size▪ Built-in bypass contactor▪ Multiple starting/stopping techniquesincluding torque control▪ Internal overload class 5, 10, 15, 20, or 30▪ Built-in graphical LCD keypad▪ Internal self protection▪ Fault monitoring▪ 3 parameter sets▪ Communication capable via opt. Profibusmodule▪ Programmable inputs and outputs▪ External keypad availableFor all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.3RW44 For High Feature ApplicationsIdeal applications for 3RW44 enclosedsoftstarters:▪ Fans▪ Pumps▪ Conveying systems and lifts▪ Hydraulics▪ Machine tools▪ Mills saws▪ Crushers and grinders▪ Mixers▪ HVAC systemsThe 3RW44 severe duty rating table shouldbe applied for high inertia applicationssuch rock crushers, chippers, screwcompressors, ect.Class 74 starters are built to UL and CSAstandards.16CONTROLPRODUCTSSoft StarterControlRatedMAX HP KW Class 20 Severe Duty (350% * Ie for 20s) Operating OPEN Style List List List List NEMA 4/4X ListCurrent 200V 230V 460V 575V 380V (Starter Only) NEMA 1 Price $ NEMA 3R Price $ NEMA 12 Price $ NEMA 4 Price $ Stainless Steel Price $26 7.5 7.5 15 — 12 3RW4422-1BC34 74AT3_BFAP 4700.00 74AT3_DFAP 4700.00 74AT3_0FAP 4700.00 74AT3_EFAP 5000.00 74AT3_WFAP 5700.0032 10 10 20 — 15 3RW4423-1BC34 74BT3_BFAP 4900.00 74BT3_DFAP 4900.00 74BT3_0FAP 4900.00 74BT3_EFAP 5200.00 74BT3_WFAP 5900.0042 10 15 25 — 19 3RW4424-1BC34 74CT3_BFAP 5000.00 74CT3_DFAP 5000.00 74CT3_0FAP 5000.00 74CT3_EFAP 5300.00 74CT3_WFAP 6000.0051 15 15 30 — 22 3RW4425-1BC34 74DT3_BFAP 5500.00 74DT3_DFAP 5500.00 74DT3_0FAP 5500.00 74DT3_EFAP 5800.00 74DT3_WFAP 7100.0068 20 25 50 — 37 3RW4426-1BC34 74ET3_BFAP 5800.00 74ET3_DFAP 5800.00 74ET3_0FAP 5800.00 74ET3_EFAP 6100.00 74ET3_WFAP 7300.0082 25 30 60 — 45 3RW4427-1BC34 74FT3_BFAP 6400.00 74FT3_DFAP 6400.00 74FT3_0FAP 6400.00 74FT3_EFAP 6800.00 74FT3_WFAP 7700.0097 30 30 60 — 45 3RW4434-6BC34 74GT3_BFAP 6800.00 74GT3_DFAP 6800.00 74GT3_0FAP 6800.00 74GT3_EFAP 7200.00 74GT3_WFAP 8100.00113 30 40 75 — 56 3RW4435-6BC34 74HT3_BFAP 7900.00 74HT3_DFAP 7900.00 74HT3_0FAP 7900.00 74HT3_EFAP 8300.00 74HT3_WFAP 11100.00134 40 50 75 — 56 3RW4436-6BC34 74JT3_BFAP 8400.00 74JT3_DFAP 8400.00 74JT3_0FAP 8400.00 74JT3_EFAP 8900.00 74JT3_WFAP 11300.00175 50 60 100 — 75 3RW4443-6BC34 74KT3_BFAP 10300.00 74KT3_DFAP 10300.00 74KT3_0FAP 10300.00 74KT3_EFAP 10900.00195 60 75 125 — 93 3RW4444-6BC34 74LT3_BFAP 11400.00 74LT3_DFAP 11400.00 74LT3_0FAP 11400.00 74LT3_EFAP 12000.00243 75 75 150 — 112 3RW4445-6BC34 74MT3_BFAP 14500.00 74MT3_DFAP 14500.00 74MT3_0FAP 14500.00 74MT3_EFAP 15300.00263 75 100 200 — 149 3RW4446-6BC34 74NT3_BFAP 16000.00 74NT3_DFAP 16100.00 74NT3_0FAP 16000.00 74NT3_EFAP 16800.00326 100 125 250 — 186 3RW4447-6BC34 74PT3_BFAP 17600.00 74PT3_DFAP 17700.00 74PT3_0FAP 17600.00 74PT3_EFAP 18500.00494 150 150 400 — 298 3RW4453-6BC34 73QT_BFAP 73QT_DFAP 73QT_0FAP 73QT_EFAP551 150 200 450 — 336 3RW4454-6BC34 73RT_BFAP 73RT_DFAP 73RT_0FAP 73RT_EFAP615 200 200 500 — 373 3RW4455-6BC34 73ST_BFAP 73ST_DFAP 73ST_0FAP 73ST_EFAPAVAILABILITY 634 200 250 500 — 373 3RW4456-6BC34 73TT_BFAP TO 73TT_DFAPBE 73TT_0FAP ANNOUNCED73TT_EFAP650 200 250 550 — 373 3RW4457-6BC34 73WT_BFAP 73WT_DFAP 73WT_0FAP 73WT_EFAP200V 6 6 6 6 6230V 2 2 2 2 2380V 3 3 3 3 3460V 4 4 4 4 426 — — 15 20 — 3RW4422-1BC35 74AT35BFAP 5000.00 74AT35DFAP 5000.00 74AT350FAP 5000.00 74AT35EFAP 5300.00 74AT35WFAP 6000.0032 — — 20 25 — 3RW4423-1BC35 74BT35BFAP 5200.00 74BT35DFAP 5200.00 74BT350FAP 5200.00 74BT35EFAP 5600.00 74BT35WFAP 6200.0042 — — 25 30 — 3RW4424-1BC35 74CT35BFAP 5400.00 74CT35DFAP 5300.00 74CT350FAP 5300.00 74CT35EFAP 5700.00 74CT35WFAP 6300.0051 — — 30 40 — 3RW4425-1BC35 74DT35BFAP 5900.00 74DT35DFAP 5900.00 74DT350FAP 5900.00 74DT35EFAP 6200.00 74DT35WFAP 7500.0068 — — 50 50 — 3RW4426-1BC35 74ET35BFAP 6300.00 74ET35DFAP 6200.00 74ET350FAP 6200.00 74ET35EFAP 6600.00 74ET35WFAP 7800.0082 — — 60 75 — 3RW4427-1BC35 74FT35BFAP 6900.00 74FT35DFAP 6900.00 74FT350FAP 6900.00 74FT35EFAP 7300.00 74FT35WFAP 8100.0097 — — 60 75 — 3RW4434-6BC35 74GT35BFAP 7400.00 74GT35DFAP 7400.00 74GT350FAP 7300.00 74GT35EFAP 7800.00 74GT35WFAP 8600.00113 — — 75 100 — 3RW4435-6BC35 74HT35BFAP 8500.00 74HT35DFAP 8500.00 74HT350FAP 8500.00 74HT35EFAP 9000.00 74HT35WFAP 11800.00134 — — 75 125 — 3RW4436-6BC35 74JT35BFAP 9100.00 74JT35DFAP 9200.00 74JT350FAP 9200.00 74JT35EFAP 9400.00 74JT35WFAP 12100.00175 — — 100 150 — 3RW4443-6BC35 74KT35BFAP 11200.00 74KT35DFAP 11200.00 74KT350FAP 11200.00 74KT35EFAP 11800.00195 — — 125 200 — 3RW4444-6BC35 74LT35BFAP 12500.00 74LT35DFAP 12500.00 74LT350FAP 12500.00 74LT35EFAP 13200.00243 — — 150 200 — 3RW4445-6BC35 74MT35BFAP 15800.00 74MT35DFAP 15800.00 74MT350FAP 15800.00 74MT35EFAP 16600.00263 — — 200 250 — 3RW4446-6BC35 74NT35BFAP 17400.00 74NT35DFAP 17500.00 74NT350FAP 17400.00 74NT35EFAP 18400.00326 — — 250 300 — 3RW4447-6BC35 74PT35BFAP 19300.00 74PT35DFAP 19400.00 74PT350FAP 19300.00 74PT35EFAP 20300.00494 — — 400 500 — 3RW4453-6BC35 73QT35BFAP 73QT35DFAP 73QT350FAP 73QT35EFAP551 — — 450 550 — 3RW4454-6BC35 73RT35BFAP 73RT35DFAP 73RT350FAP 73RT35EFAP615 — — 500 600 — 3RW4455-6BC35 73ST35BFAP 73ST35DFAP 73ST350FAP 73ST35EFAPAVAILABILITY 693 — — 550 650 — 3RW4456-6BC35 73TT35BFAP TO 73TT35DFAPBE 73TT350FAP ANNOUNCED73TT35EFAP780 — — 600 700 — 3RW4457-6BC35 73WT35BFAP 73WT35DFAP 73WT350FAP 73WT35EFAP Starter size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.HPs are for reference only. Enclosed ratings are at 40°C. Starter selection is dependent on type of application. Ie = FLA rating of motor.16-174Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule IEC

Control ProductsEnclosed 3RW44SelectionEnclosed Combination with Fusible DisconnectOrdering Information Enclosed devices should be ordered bythe FLA of the motor. The 3RW44 is designed for normalstarting applications. For factory modifications see page 16-177. For complete derating and application infosee the 2006 Industrial Controls catalogCPPC-06000-0106. For dimensional drawings see page 16-178.Class 74 non-combination starters include:▪ NEMA rated enclosure▪ 3RW44 Sirius softstarter with built-in OLand bypass▪ Fusible disconnect▪ Control circuit transformer▪ Reset button3RW44 Enclosed features:▪ Available in NEMA 1, 12, 3R, 4, and 4stainless steel▪ Compact size▪ Built-in bypass contactor▪ Multiple starting/stopping techniquesincluding torque control▪ Internal overload class 5, 10, 15, 20, or 30▪ Built-in graphical LCD keypad▪ Internal self protection▪ Fault monitoring▪ 3 parameter sets▪ Communication capable via opt. Profibusmodule▪ Programmable inputs and outputs▪ External keypad availableFor all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.3RW44 For High Feature ApplicationsIdeal applications for 3RW44 enclosedsoftstarters:▪ Fans▪ Pumps▪ Conveying systems and lifts▪ Hydraulics▪ Machine tools▪ Mills saws▪ Crushers and grinders▪ Mixers▪ HVAC systemsThe 3RW44 severe duty rating table shouldbe applied for high inertia applicationssuch rock crushers, chippers, screwcompressors, ect.Class 74 starters are built to UL and CSAstandards.RatedMAX HP KW Class 10 Light Duty Operating OPEN Style List List List List NEMA 4/4X ListCurrent 200V 230V 460V 575V 380V (Starter Only) NEMA 1 Price $ NEMA 3R Price $ NEMA 12 Price $ NEMA 4 Price $ Stainless Steel Price $26 7.5 7.5 15 — 12 3RW4422-1BC34 74AT3_BFAF 4600.00 74AT3_DFAF 4500.00 74AT3_0FAF 4500.00 74AT3_EFAF 4800.00 74AT3_WFAF 5500.0032 10 10 20 — 15 3RW4423-1BC34 74BT3_BFAF 4800.00 74BT3_DFAF 4800.00 74BT3_0FAF 4800.00 74BT3_EFAF 5100.00 74BT3_WFAF 5800.0042 10 15 25 — 19 3RW4424-1BC34 74CT3_BFAF 5100.00 74CT3_DFAF 5100.00 74CT3_0FAF 5100.00 74CT3_EFAF 5400.00 74CT3_WFAF 6100.0051 15 15 30 — 22 3RW4425-1BC34 74DT3_BFAF 5500.00 74DT3_DFAF 5400.00 74DT3_0FAF 5400.00 74DT3_EFAF 5700.00 74DT3_WFAF 7000.0068 20 25 50 — 37 3RW4426-1BC34 74ET3_BFAF 5700.00 74ET3_DFAF 5700.00 74ET3_0FAF 5700.00 74ET3_EFAF 6000.00 74ET3_WFAF 7300.0082 25 30 60 — 45 3RW4427-1BC34 74FT3_BFAF 6400.00 74FT3_DFAF 6400.00 74FT3_0FAF 6400.00 74FT3_EFAF 6800.00 74FT3_WFAF 7700.00100 30 30 75 — 56 3RW4434-6BC34 74GT3_BFAF 6800.00 74GT3_DFAF 6800.00 74GT3_0FAF 6800.00 74GT3_EFAF 7200.00 74GT3_WFAF 8100.00117 30 40 75 — 56 3RW4435-6BC34 74HT3_BFAF 7600.00 74HT3_DFAF 7600.00 74HT3_0FAF 7600.00 74HT3_EFAF 8000.00 74HT3_WFAF 10800.00145 40 50 100 — 75 3RW4436-6BC34 74JT3_BFAF 8800.00 74JT3_DFAF 8800.00 74JT3_0FAF 8800.00 74JT3_EFAF 9300.00 74JT3_WFAF 11700.00180 60 60 125 — 93 3RW4443-6BC34 74KT3_BFAF 11000.00 74KT3_DFAF 11000.00 74KT3_0FAF 11000.00 74KT3_EFAF 11600.00215 60 75 150 — 112 3RW4444-6BC34 74LT3_BFAF 11900.00 74LT3_DFAF 11900.00 74LT3_0FAF 11900.00 74LT3_EFAF 12400.00280 75 100 200 — 149 3RW4445-6BC34 74MT3_BFAF 14900.00 74MT3_DFAF 14900.00 74MT3_0FAF 14900.00 74MT3_EFAF 15700.00315 100 125 250 — 186 3RW4446-6BC34 74NT3_BFAF 16400.00 74NT3_DFAF 16400.00 74NT3_0FAF 16400.00 74NT3_EFAF 17300.00385 125 150 300 — 224 3RW4447-6BC34 74PT3_BFAF 18000.00 74PT3_DFAF 18100.00 74PT3_0FAF 18000.00 74PT3_EFAF 18900.00494 150 200 400 — 298 3RW4453-6BC34 73QT_BFAF 73QT_DFAF 73QT_0FAF 73QT_EFAF551 150 200 450 — 336 3RW4454-6BC34 73RT_BFAF 73RT_DFAF 73RT_0FAF 73RT_EFAF615 200 250 500 — 373 3RW4455-6BC34 73ST_BFAF 73ST_DFAF 73ST_0FAF 73ST_EFAFAVAILABILITY 693 200 250 550 — 3RW4456-6BC34 73TT_BFAF TO 73TT_DFAFBE 73TT_0FAF ANNOUNCED73TT_EFAF780 200 250 600 — 447 3RW4457-6BC34 73WT_BFAF 73WT_DFAF 73WT_0FAF 73WT_EFAF200V 6 6 6 6 6230V 2 2 2 2 2380V 3 3 3 3 3460V 4 4 4 4 426 — — 15 20 — 3RW4422-1BC35 74AT35BFAF 4800.00 74AT35DFAF 4800.00 74AT350FAF 4800.00 74AT35EFAF 5100.00 74AT35WFAF 5800.0032 — — 20 25 — 3RW4423-1BC35 74BT35BFAF 5100.00 74BT35DFAF 5100.00 74BT350FAF 5100.00 74BT35EFAF 5400.00 74BT35WFAF 6100.0042 — — 25 30 — 3RW4424-1BC35 74CT35BFAF 5500.00 74CT35DFAF 5500.00 74CT350FAF 5500.00 74CT35EFAF 5800.00 74CT35WFAF 6500.0051 — — 30 40 — 3RW4425-1BC35 74DT35BFAF 5800.00 74DT35DFAF 5800.00 74DT350FAF 5800.00 74DT35EFAF 6100.00 74DT35WFAF 7400.0068 — — 50 50 — 3RW4426-1BC35 74ET35BFAF 6200.00 74ET35DFAF 6100.00 74ET350FAF 6100.00 74ET35EFAF 6500.00 74ET35WFAF 7700.0082 — — 60 75 — 3RW4427-1BC35 74FT35BFAF 6900.00 74FT35DFAF 6900.00 74FT350FAF 6900.00 74FT35EFAF 7300.00 74FT35WFAF 8200.00100 — — 75 75 — 3RW4434-6BC35 74GT35BFAF 7400.00 74GT35DFAF 7400.00 74GT350FAF 7400.00 74GT35EFAF 7800.00 74GT35WFAF 8700.00117 — — 75 100 — 3RW4435-6BC35 74HT35BFAF 8200.00 74HT35DFAF 8200.00 74HT350FAF 8200.00 74HT35EFAF 8800.00 74HT35WFAF 11500.00145 — — 100 125 — 3RW4436-6BC35 74JT35BFAF 9600.00 74JT35DFAF 9600.00 74JT350FAF 9600.00 74JT35EFAF 10100.00 74JT35WFAF 12500.00180 — — 125 150 — 3RW4443-6BC35 74KT35BFAF 11900.00 74KT35DFAF 11900.00 74KT350FAF 11900.00 74KT35EFAF 12500.00215 — — 150 200 — 3RW4444-6BC35 74LT35BFAF 12900.00 74LT35DFAF 12900.00 74LT350FAF 12900.00 74LT35EFAF 13600.00280 — — 200 250 — 3RW4445-6BC35 74MT35BFAF 16100.00 74MT35DFAF 16100.00 74MT350FAF 16100.00 74MT35EFAF 17000.00315 — — 250 300 — 3RW4446-6BC35 74NT35BFAF 17800.00 74NT35DFAF 17900.00 74NT350FAF 17800.00 74NT35EFAF 18700.00385 — — 300 400 — 3RW4447-6BC35 74PT35BFAF 19700.00 74PT35DFAF 19800.00 74PT350FAF 19700.00 74PT35EFAF 20700.00494 — — 400 500 — 3RW4453-6BC35 73QT35BFAF 73QT35DFAF 73QT350FAF 73QT35EFAF551 — — 450 600 — 3RW4454-6BC35 73RT35BFAF 73RT35DFAF 73RT350FAF 73RT35EFAF615 — — 500 700 — 3RW4455-6BC35 73ST35BFAF 73ST35DFAF 73ST350FAF 73ST35EFAFAVAILABILITY 693 — — 550 750 — 3RW4456-6BC35 73TT35BFAF TO 73TT35DFAFBE 73TT350FAF ANNOUNCED73TT35EFAF780 — — 600 850 — 3RW4457-6BC35 73WT35BFAF 73WT35DFAF 73WT350FAF 73WT35EFAF Starter size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.HPs are for reference only. Enclosed ratings are at 40°C. Starter selection is dependent on type of application. Ie = FLA rating of motor.16 CONTROLPRODUCTSSoft StarterControlDiscount Schedule IECSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-175

Control ProductsEnclosed 3RW44SelectionEnclosed Combination with Fusible DisconnectOrdering Information Enclosed devices should be ordered bythe FLA of the motor. The 3RW44 is designed for normalstarting applications. For factory modifications see page 16-177. For complete derating and application infosee the 2006 Industrial Controls catalogCPPC-06000-0106. For dimensional drawings see page 16-178.Class 74 non-combination starters include:▪ NEMA rated enclosure▪ 3RW44 Sirius softstarter with built-in OLand bypass▪ Fusible disconnect▪ Control circuit transformer▪ Reset button3RW44 Enclosed features:▪ Available in NEMA 1, 12, 3R, 4, and 4stainless steel▪ Compact size▪ Built-in bypass contactor▪ Multiple starting/stopping techniquesincluding torque control▪ Internal overload class 5, 10, 15, 20, or 30▪ Built-in graphical LCD keypad▪ Internal self protection▪ Fault monitoring▪ 3 parameter sets▪ Communication capable via opt. Profibusmodule▪ Programmable inputs and outputs▪ External keypad availableFor all technical information, please consult the 2006 Industrial Controls Catalog or contact your local sales support center.3RW44 For High Feature ApplicationsIdeal applications for 3RW44 enclosedsoftstarters:▪ Fans▪ Pumps▪ Conveying systems and lifts▪ Hydraulics▪ Machine tools▪ Mills saws▪ Crushers and grinders▪ Mixers▪ HVAC systemsThe 3RW44 severe duty rating table shouldbe applied for high inertia applicationssuch rock crushers, chippers, screwcompressors, ect.Class 74 starters are built to UL and CSAstandards.16CONTROLPRODUCTSSoft StarterControlRatedMAX HP KW Class 20 Severe Duty (350% * Ie for 20s) Operating OPEN Style List List List List NEMA 4/4X ListCurrent 200V 230V 460V 575V 380V (Starter Only) NEMA 1 Price $ NEMA 3R Price $ NEMA 12 Price $ NEMA 4 Price $ Stainless Steel Price $26 7.5 7.5 15 — 12 3RW4422-1BC34 74AT3_BFAF 4600.00 74AT3_DFAF 4500.00 74AT3_0FAF 4500.00 74AT3_EFAF 4800.00 74AT3_WFAF 5500.0032 10 10 20 — 15 3RW4423-1BC34 74BT3_BFAF 4800.00 74BT3_DFAF 4800.00 74BT3_0FAF 4800.00 74BT3_EFAF 5100.00 74BT3_WFAF 5800.0042 10 15 25 — 19 3RW4424-1BC34 74CT3_BFAF 5100.00 74CT3_DFAF 5100.00 74CT3_0FAF 5100.00 74CT3_EFAF 5400.00 74CT3_WFAF 6100.0051 15 15 30 — 22 3RW4425-1BC34 74DT3_BFAF 5500.00 74DT3_DFAF 5400.00 74DT3_0FAF 5400.00 74DT3_EFAF 5700.00 74DT3_WFAF 7000.0068 20 25 50 — 37 3RW4426-1BC34 74ET3_BFAF 5700.00 74ET3_DFAF 5700.00 74ET3_0FAF 5700.00 74ET3_EFAF 6000.00 74ET3_WFAF 7300.0082 25 30 60 — 45 3RW4427-1BC34 74FT3_BFAF 6400.00 74FT3_DFAF 6400.00 74FT3_0FAF 6400.00 74FT3_EFAF 6800.00 74FT3_WFAF 7700.0097 30 30 60 — 45 3RW4434-6BC34 74GT3_BFAF 6800.00 74GT3_DFAF 6800.00 74GT3_0FAF 6800.00 74GT3_EFAF 7200.00 74GT3_WFAF 8100.00113 30 40 75 — 56 3RW4435-6BC34 74HT3_BFAF 7600.00 74HT3_DFAF 7600.00 74HT3_0FAF 7600.00 74HT3_EFAF 8000.00 74HT3_WFAF 10800.00134 40 50 75 — 56 3RW4436-6BC34 74JT3_BFAF 8800.00 74JT3_DFAF 8800.00 74JT3_0FAF 8800.00 74JT3_EFAF 9300.00 74JT3_WFAF 11700.00175 50 60 100 — 75 3RW4443-6BC34 74KT3_BFAF 11000.00 74KT3_DFAF 11000.00 74KT3_0FAF 11000.00 74KT3_EFAF 11600.00195 60 75 125 — 93 3RW4444-6BC34 74LT3_BFAF 11900.00 74LT3_DFAF 11900.00 74LT3_0FAF 11900.00 74LT3_EFAF 12400.00243 75 75 150 — 112 3RW4445-6BC34 74MT3_BFAF 14900.00 74MT3_DFAF 14900.00 74MT3_0FAF 14900.00 74MT3_EFAF 15700.00263 75 100 200 — 149 3RW4446-6BC34 74NT3_BFAF 16400.00 74NT3_DFAF 16400.00 74NT3_0FAF 16400.00 74NT3_EFAF 17300.00326 100 125 250 — 186 3RW4447-6BC34 74PT3_BFAF 18000.00 74PT3_DFAF 18100.00 74PT3_0FAF 18000.00 74PT3_EFAF 18900.00494 150 150 400 — 298 3RW4453-6BC34 73QT_BFAF 73QT_DFAF 73QT_0FAF 73QT_EFAF551 150 200 450 — 336 3RW4454-6BC34 73RT_BFAF 73RT_DFAF 73RT_0FAF 73RT_EFAF615 200 200 500 — 373 3RW4455-6BC34 73ST_BFAF 73ST_DFAF 73ST_0FAF 73ST_EFAFAVAILABILITY 634 200 250 500 — 373 3RW4456-6BC34 73TT_BFAF TO 73TT_DFAFBE 73TT_0FAF ANNOUNCED73TT_EFAF650 200 250 550 — 373 3RW4457-6BC34 73WT_BFAF 73WT_DFAF 73WT_0FAF 73WT_EFAF200V 6 6 6 6 6230V 2 2 2 2 2380V 3 3 3 3 3460V 4 4 4 4 426 — — 15 20 — 3RW4422-1BC35 74AT35BFAF 4800.00 74AT35DFAF 4800.00 74AT350FAF 4800.00 74AT35EFAF 5100.00 74AT35WFAF 5800.0032 — — 20 25 — 3RW4423-1BC35 74BT35BFAF 5100.00 74BT35DFAF 5100.00 74BT350FAF 5100.00 74BT35EFAF 5400.00 74BT35WFAF 6100.0042 — — 25 30 — 3RW4424-1BC35 74CT35BFAF 5500.00 74CT35DFAF 5500.00 74CT350FAF 5500.00 74CT35EFAF 5800.00 74CT35WFAF 6500.0051 — — 30 40 — 3RW4425-1BC35 74DT35BFAF 5800.00 74DT35DFAF 5800.00 74DT350FAF 5800.00 74DT35EFAF 6100.00 74DT35WFAF 7400.0068 — — 50 50 — 3RW4426-1BC35 74ET35BFAF 6200.00 74ET35DFAF 6100.00 74ET350FAF 6100.00 74ET35EFAF 6500.00 74ET35WFAF 7700.0082 — — 60 75 — 3RW4427-1BC35 74FT35BFAF 6900.00 74FT35DFAF 6900.00 74FT350FAF 6900.00 74FT35EFAF 7300.00 74FT35WFAF 8200.0097 — — 60 75 — 3RW4434-6BC35 74GT35BFAF 7400.00 74GT35DFAF 7400.00 74GT350FAF 7400.00 74GT35EFAF 7800.00 74GT35WFAF 8700.00113 — — 75 100 — 3RW4435-6BC35 74HT35BFAF 8200.00 74HT35DFAF 8200.00 74HT350FAF 8200.00 74HT35EFAF 8800.00 74HT35WFAF 11500.00134 — — 75 125 — 3RW4436-6BC35 74JT35BFAF 9600.00 74JT35DFAF 9600.00 74JT350FAF 9600.00 74JT35EFAF 10100.00 74JT35WFAF 12500.00175 — — 100 150 — 3RW4443-6BC35 74KT35BFAF 11900.00 74KT35DFAF 11900.00 74KT350FAF 11900.00 74KT35EFAF 12500.00195 — — 125 200 — 3RW4444-6BC35 74LT35BFAF 12900.00 74LT35DFAF 12900.00 74LT350FAF 12900.00 74LT35EFAF 13600.00243 — — 150 200 — 3RW4445-6BC35 74MT35BFAF 16100.00 74MT35DFAF 16100.00 74MT350FAF 16100.00 74MT35EFAF 17000.00263 — — 200 250 — 3RW4446-6BC35 74NT35BFAF 17800.00 74NT35DFAF 17900.00 74NT350FAF 17800.00 74NT35EFAF 18700.00326 — — 250 300 — 3RW4447-6BC35 74PT35BFAF 19700.00 74PT35DFAF 19800.00 74PT350FAF 19700.00 74PT35EFAF 20700.00494 — — 400 500 — 3RW4453-6BC35 73QT35BFAF 73QT35DFAF 73QT350FAF 73QT35EFAF551 — — 450 550 — 3RW4454-6BC35 73RT35BFAF 73RT35DFAF 73RT350FAF 73RT35EFAF615 — — 500 600 — 3RW4455-6BC35 73ST35BFAF 73ST35DFAF 73ST350FAF 73ST35EFAFAVAILABILITY 693 — — 550 650 — 3RW4456-6BC35 73TT35BFAF TO 73TT35DFAFBE 73TT350FAF ANNOUNCED73TT35EFAF780 — — 600 700 — 3RW4457-6BC35 73WT35BFAF 73WT35DFAF 73WT350FAF 73WT35EFAF Starter size is dependent on the nameplate Full Load Amps (FLA) rating of the motor.HPs are for reference only. Enclosed ratings are at 40°C. Starter selection is dependent on type of application. Ie = FLA rating of motor.16-176Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule IEC

Control ProductsFactory ModificationsModificationAvailable modifications in STANDARD enclosure 3RW Version Enclosed StyleEnclosure NEMATypeMod SuffixList PriceAdder $Pilot DevicesPush ButtonsStart/Stop 3RW40/44 73/74 ALL A1 260.Selector SwitchesHand-Off-Auto 3RW40/44 73/74 ALL A3 260.Hand-Off-Auto (keyed) 3RW40/44 73/74 ALL S3 390.Off-On 3RW40/44 73/74 ALL A4 260.Pilot LightRed ‘On’ 3RW40/44 73/74 ALL FA 250.Green ‘On’ 3RW40/44 73/74 ALL FB 250.Red ‘Run’ 3RW40/44 73/74 ALL FC 250.Green ‘Run’ 3RW40/44 73/74 ALL FD 250.Red ‘Off’ 3RW40/44 73/74 ALL FJ 250.Green ‘Off’ 3RW40/44 73/74 ALL FK 250.Amber ‘Fault’ 3RW40/44 73/74 ALL FL 250.White ‘Control Power On’ 3RW40/44 73/74 ALL FW 250.Red ‘On’ Push-to-Test 3RW40/44 73/74 ALL FS 360.Green ‘On’ Push-to-Test 3RW40/44 73/74 ALL FT 360.Green ‘Off’ Push-to-Test 3RW40/44 73/74 ALL FU 360.Custom pilot light (state color and nameplate text) 3RW40/44 73/74 ALL FZ 300.Through the Door MeteringExternal keypad for 3RW44 3RW44 73/74 N1, N12 K1 1100.Elapse time meter 3RW40/44 N1, N12 (120V) M5 300.Control OptionsProfibus Communication Module (installed-connectioncable not supplied3RW44 73/74 ALL P1 1000.Ground Lug - 1 Conductor 3RW40/44 73/74 ALL L10 100.Alarm Package - Includes horn, light, relay & push button 3RW40/44 73/74 N1, N3, N12 M7 500.Electronic 8 function timing relay (.05s - 100h)supplied mounted and unwired3RW40/44 73/74 ALL TR 400.R04 300.Control Relay supplied mounted and unwired (4-pole max) 3RW40/44 73/74 ALLR22 300.R40 300.Circuit Breaker Shunt Trip (included std in 3RW40 versions) 3RW44 74 ALL L6 500.Service Entrance Labeled 3RW40/44 74 ALL N3 100.Function identification plate, with marking as specified 3RW40/44 73/74 ALL N1 100.Terminal Block 3 point 3RW40/44 73/74 ALL TC3 150.Terminal Block 6 point 3RW40/44 73/74 ALL TC6 150.Terminal Block 9 point 3RW40/44 73/74 ALL TC9 150.Terminal Block 12 point 3RW40/44 73/74 ALL TC12 150.Options Requiring the Modified Options Box SizeModificationMODIFIED BOX ADDER (change 8th character to a ‘G’)Mod Box Options3RW Version3RW403RW443RW40 current size(3rd character)3RW44 current size(3rd character)EnclosedStyle73747374EnclosedNEMA TypeModSuffix List Price Adder $117 – 285A – D315E385FN1/12/3R/4 800. 800. 0N4SS 2600. 2600. 500.N1/12/3R/4 800. 0 0N4SS 2600. — —26 – 51A – D68E82 – 117F – H145 – 215J – L280 – 385M – PN1/12/3R/4 300. 1000. 1000. 1000. 0N4SS 900. 3400. 2600. 2500. 0N1/12/3R/4 1100. 1000. 800. 500. 0N4SS 3000. 2600. 2500. 600. —26 – 42A, B, C51 – 68D, E117A82 – 117F, G, H145 – 205B, C145 – 215J, K, L248D280MSelection315 – 385E, F315 – 385N, PContactor OptionsIsolation contactor 3RW40/44 73/74 N1/12/3R/4 IC 700. 1200. 1700. 1800. 2600. 4300.Emergency HP Rated Bypass Starter 3RW40 73/74 N1/12/3R/4 A12 3500. 5000. 6600. 10000.*Includes keyed selector switch to selectbetween soft start and across the line start3RW44 73/74 N1/12/3R/4 A12 1300. 1600. 1900. 3200. 4100. 5800.Extra Capacity CPT100 VA Extra 3RW40/44 73/74 ALL CA 600. 600. 600. 600. 600. 600.Control OptionsSpace Heater (120V separate control) 3RW40/44 73/74 ALL SH 300.Space Heater with Thermostat (120Vseparate control)3RW40/44 73/74 ALL ST 500.Lightning Arrestor 3RW40/44 73/74 ALL L 600.16 CONTROLPRODUCTSSoft StarterControl Limited to N4SS offering.Discount Schedule IEC An isolation contactor is included for 3RW40.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-177

Control ProductsClass 73, 74DimensionsDimensions are in inches and are for reference only (not for construction). Certain styles may deviate from values indicated.16CONTROLPRODUCTSSoft StarterControlNon-Combination Class 73N1, N12, N4 Standard Enclosure3RW403RW443RW403RW44Amps A B C117-145 36 18 15205-315 36 22 20385 54 36 2026-68 26 12.5 1582-117 36 18 15145-215 36 22 20280-385 54 36 20N4 Stainless Steel Standard EnclosureAmps A B C117 36 18 15145-205 36 22 20248-385 54 36 2026-51 26 12.5 1568-82 36 18 15100-117 36 22 20145-385 54 36 20N1, N12, N4 Modified EnclosureAmps A B C3RW40 117-385 56 36 203RW4426-51 36 22 2068-385 54 36 20N4 Stainless Steel Modified EnclosureAmps A B C3RW40 117-385 54 36 203RW4426-51 36 22 2068-385 54 36 20Combination Type Class 74N1, N12, N4 Standard Enclosure3RW403RW443RW403RW44Amps A B C117-145 50 25 20145-205 66 25 20248-315 90 30 20385 90 40 2026-68 36 23 1582-117 50 25 20145-215 66 25 20280 90 30 20315-384 90 40 20N4 Stainless Steel Standard Enclosure3RW403RW44Amps A B C117-145 54 36 20205-300 90 40 2026-42 36 23 1551-100 50 25 20117-145 54 36 20180-385 90 40 20N1, N12, N4 Modified EnclosureAmps A B C117-248 76 30 20315 90 30 20385 90 40 2026-215 76 30 20280 90 30 20315-385 90 40 20N4 Stainless Steel Modified EnclosureAmps A B C3RW40 117-145 76 30 203RW44 26-145 76 30 2016-178Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Control ProductsClass 73, 74Wiring Diagrams16 CONTROLPRODUCTSSoft StarterControlSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-179

Pushbutton Units and Indicator LightsClass 50 Standard Duty Pushbutton StationsFeatures• Snap In Legend Inserts• Flush and Surface Mounted Types• Convertible Selector• Double Break Contacts• Dual Voltage Pilot Light with Snap In Lens• Conversion Kits• UL Listed File #E22655• CSA Certified File #LR6535ApplicationStandard duty control stations are used withmagnetic controllers to control the starting,stopping, reversing or speed of applicablemotors.Stations are assembled of one, two or threepush button, selector switch or pilot lightunits in a variety of combinations to providecompact control units for remote control ofmagnetic starters and contactors.Station enclosures are available in Type 1surface mounted, 1B flush plate mountedand 4 watertight.Padlock Attachment Kit50ZAL can be mounted to any Type 1 surfacemounted station by the lower screwwhich fastens the cover to the station base.Made of heavy steel, chrome plated, the attachmentprovides for the padlocking of apush button in the depressed position or aselector switch in any position. When usedwith a push button operator, raised LegendInsert D53493003 (Red Stop) must be used.Pendant BracketAdapts standard Type 1 surface mountedstations for suspension from a cable orchain. Bracket 50ZAP2 is used for one andtwo unit stations, 50ZAP3 for three unit stations.Electrical RatingsNEMA AC Ratings 50/60HzNema B600 5 Continuous AmpsVolts Make Break120 30 3240 15 1.5480 7.5 0.75600 6 0.6VA 3600 360Ordering Information• Legend Inserts see page 16-187.• Accessories see page 16-187.General16CONTROLPRODUCTSFeaturesType 1 surface mounted bases are constructedof 14 gauge sheet steel, primedand finished in baked gray enamel. Thebase is predrilled to receive a variety of contactblocks, pilot lights and accessory devices.Covers are of 20 gauge sheet steel,wrap- around construction, primed and finishedin baked gray enamel. Furnas Type 4watertight heavy duty push button stationsare supplied with a provision to padlock thestop button in the depressed position. Enclosuresare predrilled and tapped for 3/4" conduit.Contact blocks have double break, fine silvercontacts with a NEMA B600 rating. Type4 stations have a NEMA A600 rating.The pilot light assembly is dual voltage withclearly marked pressure type terminals for120 volt or 240 volt connection.The lens of the pilot light snaps into thecover and is available in both red and green.Push buttons are equipped with an operatorinto which a selected legend insert issnapped. Legend inserts are molded thermoplasticand come in a wide variety of legendsand colors.The selector switch operator can be instantlyset for two or three positions at any time.2 Push ButtonsSurface Mounting, NEMA 12 Push ButtonsFlush Mounting, NEMA 1BMushroom Head50ZMH mounts on any standard push buttonoperator. The Mushroom Head is red moldedthermoplastic, 1 1/2" in diameter, and providesa large operator for emergency stop orsimilar applications.Pilot DevicesMechanical Interlock50ZAM is a base mounted zinc plate, dichromatedipped, steel assembly. Whenmounted in conjunction with Duplex ContactBlock 50ZAC3 (one NO and one NO) the interlockprevents one contact from beingclosed while the other contact is closed.1 Push ButtonSurface Mounting1 Selector SwitchFlush Mounting2 Push Buttons1 Selector Switch1 Pilot Light2 Push Buttons16-180Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Pushbutton Units and Indicator LightsClass 50 Standard Duty Pushbutton Stations5A 600V AC NEMA B600Selection and ordering data1 unit surfacemount-momentarypushbutton1 unit flush mountmomentarypushbutton2 unit surfacemount-momentarypushbuttonDiscount Schedule PILODegree ofOperator identificationprotectionA = Momentary flush pushbutton green, surface,labelNEMA 1"START"A = Momentary flush pushbutton red, surface,label "STOP"A = Momentary raised pushbutton red, surface,label "STOP"A = Momentary mushroom head red, surface,label "STOP"A = Momentary flush pushbutton less insert,surfaceA = 3 position selector switch, surface,label "HAND-OFF-AUTO"A = 3 position selector switch, surface,label "Off-On"A = 2/3 selector switch, surface, multiplelegendsNEMA 1NEMA 1NEMA 1NEMA 1Contacts / voltage1NO - 1NC with commonjumper (50ZAC1)1NO - 1NC with commonjumper (50ZAC1)1NO - 1NC with commonjumper (50ZAC1)1NO - 1NC with commonjumper (50ZAC1)1NO - 1NC with commonjumper (50ZAC1)A = Indicator light, red, surface NEMA 1 120/240V dual voltage120PSB lampA = Indicator light, green, surface NEMA 1 120/240V dual voltage120PSB lampA = Indicator light, less lens, surface NEMA 1 120/240V dual voltage120PSB lampA = Momentary flush pushbutton green,flush, label "START"A = Momentary flush pushbutton red,flush, label "STOP"A = Momentary raised pushbutton red,flush, label "STOP"A = Momentary flush pushbutton less insert,flushA = Momentary flush pushbutton less insert,flush, chrome plateA = 3 position selector switch, flush,label "HAND-OFF-AUTO"A = 3 position selector switch, flush,label "Off-On"A = 2/3 selector switch, multiple legends,flushA = 2/3 selector switch, multiple legends,chrome plate, flushNumber ofcommandpointsOrder No. ListPrice $1 unitPacksSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-181Unit1 50AA3D 49.00 11 50AA3E 49.00 11 50AA3F 49.00 11 50AA3G 58.00 11 50AA3A 47.00 1NEMA 1 2 NO 2SPST (50ZAC8) 1 50AA3C3 49.00 1NEMA 1 2 NO 2SPST (50ZAC8) 1 50AA3C6 49.00 1NEMA 1 2 NO 2SPST (50ZAC8) 1 50AA3B9 49.00 1NEMA 1BNEMA 1BNEMA 1BNEMA 1BNEMA 1B1NO - 1NC with commonjumper (50ZAC1)1NO - 1NC with commonjumper (50ZAC1)1NO - 1NC with commonjumper (50ZAC1)1NO - 1NC with commonjumper (50ZAC1)1NO - 1NC with commonjumper (50ZAC1)1 50BA3Y 115.00 11 50BA3Z 115.00 11 50BA32 109.00 11 50AA2D 62.00 11 50AA2E 62.00 11 50AA2F 62.00 11 50AA2A 60.00 11 50AA6A 66.00 1NEMA 1B 2 NO 2SPST (50ZAC8) 1 50AA2C3 62.00 1NEMA 1B 2 NO 2SPST (50ZAC8) 1 50AA2C6 62.00 1NEMA 1B 2 NO 2SPST (50ZAC8) 1 50AA2B9 62.00 1NEMA 1B 2 NO 2SPST (50ZAC8) 1 50AA6B9 68.00 1A = Indicator light, red, flush NEMA 1B 120/240V dual voltage 1 50BA2Y 127.00 1A = Indicator light, green, flush NEMA 1B 120/240V dual voltage 1 50BA2Z 127.00 1A = Indicator light, less lens, flush NEMA 1B 120/240V dual voltage 1 50BA22 121.20 1A = Indicator light, less lens, chrome plate,flushNEMA 1B 120PSB lamp 1 50BA62 127.00 1B = Momentary pushbutton green, surface,label "START"A = Momentary pushbutton red, surface,label "STOP"B = Momentary pushbutton green, surface,label "START"A = Momentary raised pushbutton red, surface,label "STOP"NEMA 1 1NO, 1NC (50ZAC2) 2 50CA3DE 49.00 1NEMA 1 1NO, 1NC (50ZAC2) 2 50CA3DF 49.00 1B = Momentary pushbutton green, surface,label "START"A = Momentary mushroom head pushbuttonred, surface, label "STOP"NEMA 1 1NO, 1NC (50ZAC2) 2 50CA3DG 64.00 1B = Momentary pushbutton, less insert,surfaceA = Momentary pushbutton, less insert,surfaceB = Momentary pushbutton, surface,label "FORWARD"A = Momentary pushbutton, surface,label "REVERSE"NEMA 1 1NO, 1NC (50ZAC2) 2 50CA3AA 45.00 1NEMA 1 2 NO (50ZAC3) 2 50DA3KL 49.00 116 CONTROLPRODUCTSPilot Devices

Pushbutton Units and Indicator LightsClass 50 Standard Duty Pushbutton Stations5A 600V AC NEMA B600Selection and ordering data16CONTROLPRODUCTSPilot Devices2 unit surfacemount-momentarypushbutton2 unit flush mountmomentarypushbuttonOperator identificationB = Momentary pushbutton, surface,label "OPEN"A = Momentary pushbutton, surface,label "CLOSE"B = Momentary pushbutton, surface,label "UP"A = Momentary pushbutton, surface,label "DOWN"B = Momentary pushbutton, surface,less insertA = Momentary pushbutton, surface,less insertB = Momentary pushbutton, surface,label "FORWARD"A = Momentary pushbutton, surface,label "REVERSE"B = Momentary pushbutton, surface,label "OPEN"A = Momentary pushbutton, surface,label "CLOSE"B = Momentary pushbutton, surface,label "UP"A = Momentary pushbutton, surface,label "DOWN"B = Momentary pushbutton, surface,label "ON"A = Momentary pushbutton, surface,label "OFF"B = Momentary pushbutton, less insertsurfaceA = Momentary pushbutton, less insert,surfaceB = Momentary pushbutton, surface,label "FORWARD"A = Momentary pushbutton, surface,label "REVERSE"B = Momentary pushbutton, surface,label "OPEN"A = Momentary pushbutton, surface,label "CLOSE"B = Momentary pushbutton, surface,label "UP"A = Momentary pushbutton, surface,label "DOWN"B = Momentary pushbutton, surface,label "ON"A = Momentary pushbutton, surface,label "OFF"B = Momentary pushbutton, surface,less insertA = Momentary pushbutton, surface,less insertB = Momentary pushbutton green, flush,label "START"A = Momentary pushbutton red, flush,label "STOP"Degree ofprotectionContacts / voltageNumberof commandpointsOrder No. ListPrice $Pack1 unit UnitNEMA 1 2 NO (50ZAC3) 2 50DA3HJ 49.00 1NEMA 1 2 NO (50ZAC3) 2 50DA3NP 49.00 1NEMA 1 2 NO (50ZAC3) 2 50DA3AA 45.00 1NEMA 1NEMA 1NEMA 1NEMA 1NEMA 12 NO mechanically interlocked(50ZA3C w/ 50ZAM)2 NO mechanically interlocked(50ZA3C w/ 50ZAM)2 NO mechanically interlocked(50ZA3C w/ 50ZAM)2 NO mechanically interlocked(50ZA3C w/ 50ZAM)2 NO mechanically interlocked(50ZA3C w/ 50ZAM)2 50RA3KL 52.00 12 50RA3HJ 62.00 12 50RA3NP 62.00 12 50RA334 62.00 12 50RA3AA 58.00 1NEMA 1 2 NO, 2 NC (2 - 50ZAC2) 2 50EA3KL 73.00 1NEMA 1 2 NO, 2 NC (2 - 50ZAC2) 2 50EA3HJ 73.00 1NEMA 1 2 NO, 2 NC (2 - 50ZAC2) 2 50EA3NP 73.00 1NEMA 1 2 NO, 2 NC (2 - 50ZAC2) 2 50EA334 73.00 1NEMA 1 2 NO, 2 NC (2 - 50ZAC2) 2 50EA3AA 69.00 1NEMA 1B 1NO, 1NC (50ZAC2) 2 50CA2DE 62.00 1B = Momentary pushbutton green, flush,label "START"A = Momentary raised pushbutton red, flush,label "STOP"NEMA 1B 1NO, 1NC (50ZAC2) 2 50CA2DF 62.00 1B = Momentary pushbutton green, flush,label "START"A = Momentary mushroom head pushbuttonred, flush, label "STOP"NEMA 1B 1NO, 1NC (50ZAC2) 2 50CA2AA 58.00 1B = Momentary pushbutton, less insert, flush NEMA 1B 1NO, 1NC (50ZAC2) 2 50CA6AA 64.00 1A = Momentary pushbutton, less insert, flush16-182Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PILO

Pushbutton Units and Indicator LightsClass 50 Standard Duty Pushbutton Stations5A 600V AC NEMA B600Selection and ordering data2 unit flush mountmomentarypushbuttonOperator identificationB = Momentary pushbutton, flush,label "FORWARD"A = Momentary pushbutton, flush,label "REVERSE"B = Momentary pushbutton, flush,label "OPEN"A = Momentary pushbutton, flush,label "CLOSE"B = Momentary pushbutton, flush,label "UP"A = Momentary pushbutton, flush,label "DOWN"Degree ofprotectionContacts / voltageNumberof commandpointsOrder No. ListPrice $Packs1 unit UnitNEMA 1B 2 NO (50ZAC3) 2 50DA2KL 62.00 1NEMA 1B 2 NO (50ZAC3) 2 50DA2HJ 62.00 1NEMA 1B 2 NO (50ZAC3) 2 50DA2NP 62.00 1B = Momentary pushbutton, less insert, flush NEMA 1B 2 NO (50ZAC3) 2 50DA2AA 58.00 1A = Momentary pushbutton, less insert, flushB = Momentary pushbutton, less insert,chrome plate, flushA = Momentary pushbutton, less insert,chrome plate, flushB = Momentary pushbutton, flush,label "FORWARD"A = Momentary pushbutton, flush,label "REVERSE"B = Momentary pushbutton, flush,label "OPEN"A = Momentary pushbutton, flush,label "CLOSE"B = Momentary pushbutton, flush,label "UP"A = Momentary pushbutton, flush,label "DOWN"B = Momentary pushbutton, flush,label "ON"A = Momentary pushbutton, flush,label "OFF"NEMA 1B 2 NO (50ZAC3) 2 50DA6AA 62.00 1NEMA 1BNEMA 1BNEMA 1BNEMA 1BB = Momentary pushbutton, less insert, flush NEMA 1BA = Momentary pushbutton, less insert, flushB = Momentary pushbutton, less insert,chrome plate, flushA = Momentary pushbutton, less insert,chrome plate, flushB = Momentary pushbutton, flush,label "FORWARD"A = Momentary pushbutton, flush,label "REVERSE"B = Momentary pushbutton, flush,label "OPEN"A = Momentary pushbutton, flush,label "CLOSE"B = Momentary pushbutton, flush,label "UP"A = Momentary pushbutton, flush,label "DOWN"B = Momentary pushbutton, flush,label "ON"A = Momentary pushbutton, flush,label "OFF"NEMA 1B2 NO mechanically interlocked(50ZA3C w/ 50ZAM)2 NO mechanically interlocked(50ZA3C w/ 50ZAM)2 NO mechanically interlocked(50ZA3C w/ 50ZAM)2 NO mechanically interlocked(50ZA3C w/ 50ZAM)2 NO mechanically interlocked(50ZA3C w/ 50ZAM)2 NO mechanically interlocked(50ZA3C w/ 50ZAM)2 50RA2KL 73.00 12 50RA2HJ 73.00 12 50RA2NP 73.00 12 50RA234 73.00 12 50RA2AA 69.00 12 50RA6AA 76.00 1NEMA 1B 2 NO, 2 NC (2 - 50ZAC2) 2 50EA2KL 86.00 1NEMA 1B 2 NO, 2 NC (2 - 50ZAC2) 2 50EA2HJ 86.00 1NEMA 1B 2 NO, 2 NC (2 - 50ZAC2) 2 50EA2NP 86.00 1NEMA 1B 2 NO, 2 NC (2 - 50ZAC2) 2 50EA234 86.00 1B = Momentary pushbutton, less insert, flush NEMA 1B 2 NO, 2 NC (2 - 50ZAC2) 2 50EA2AA 82.00 1A = Momentary pushbutton, less insert, flushB = Momentary pushbutton, less insert,chrome plate, flushA = Momentary pushbutton, less insert,chrome plate, flushNEMA 1B 2 NO, 2 NC (2 - 50ZAC2) 2 50EA6AA 88.00 116 CONTROLPRODUCTSPilot DevicesDiscount Schedule PILOSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-183

Pushbutton Units and Indicator LightsClass 50 Standard Duty Pushbutton Stations5A 600V AC NEMA B600Selection and ordering data2 unit surfacemount-momentarypushbuttonOperator identificationB = Momentary pushbutton green, surface,label "START"A = Maintained selector switch, surface,label "HAND-OFF-AUTO"Degree ofprotectionNEMA 1Contacts / voltage1NO, 1NC (50ZAC1)2 NO 2SPDT w/ commonjumper (50ZAC8)Numberof commandpointsOrder No.ListPrice $Pack1 unit Unit2 50FA3DC3 73.00 1B = Momentary pushbutton less insert, surfaceNEMA 1A = Maintained selector switch, multiple legends,surface1NO, 1NC (50ZAC1)2 NO 2SPDT w/ commonjumper (50ZAC8)2 50FA3AB9 73.00 1B = Indicator light, red, surfaceA = Maintained selector switch, surface,label "HAND-OFF-AUTO"NEMA 1120/240V dual voltage(120PSB lamp)2 NO 2SPDT w/ commonjumper (50ZAC8)2 50HA3YC3 180.00 1B = Indicator light, red, surfaceA = Maintained selector switch, multiple legends,surfaceNEMA 1120/240V dual voltage(120PSB lamp)2 NO 2SPDT w/ commonjumper (50ZAC8)2 50HA32B9 180.00 1B = Indicator light, green, surfaceA = Indicator light, red, surfaceNEMA 1120/240V dual voltage(120PSB lamp)2 50GA3ZY 180.00 1B = Indicator light, less lens, surfaceA = Indicator light, less lens, surfaceNEMA 1120/240V dual voltage(120PSB lamp)2 50GA322 168.00 12 unit flush mountmomentarypushbuttonB = Momentary pushbutton green, flush,label "START"A = Maintained selector switch, flush, label"HAND-OFF-AUTO"NEMA 1B1NO, 1NC (50ZAC1)2 NO 2SPDT w/ commonjumper (50ZAC8)2 50FA2DC3 86.00 116B = Momentary pushbutton less insert, flush NEMA 1BA = Maintained selector switch, multiple legends,flushB = Momentary pushbutton less insertchrome plate, flushA = Maintained selector switch, multiplelegends, flushNEMA 1B1NO, 1NC (50ZAC1)2 NO 2SPDT w/ commonjumper (50ZAC8)1NO, 1NC (50ZAC1)2 NO 2SPDT w/ commonjumper (50ZAC8)2 50FA2AB9 84.00 12 50FA6AB9 91.00 1CONTROLPRODUCTSB = Indicator light, red, flushA = Maintained selector switch, flush, label"HAND-OFF-AUTO"NEMA 1BB = Indicator light, less lens, flushNEMA 1BA = Maintained selector switch, multiple legends,flushB = Indicator light, less lens, chrome plate, NEMA 1BflushA = Maintained selector switch, multiple legends,flush120/240V dual voltage(120PSB lamp)2 NO 2SPDT w/ commonjumper (50ZAC8)120/240V dual voltage(120PSB lamp)2 NO 2SPDT w/ commonjumper (50ZAC8)120/240V dual voltage(120PSB lamp)2 NO 2SPDT w/ commonjumper (50ZAC8)2 50HA2YC3 189.00 12 50HA22B9 189.00 12 50HA62B9 189.00 1B = Indicator light, green, flushA = Indicator light, red, flushNEMA 1B120/240V dual voltage(120PSB lamp)2 50GA2ZY 182.00 1B = Indicator light, less lens, flushA = Indicator light, less lens, flushNEMA 1B120/240V dual voltage(120PSB lamp)2 50GA222 176.00 1B = Indicator light, less lens, chrome plate,flushA = Indicator light, less lens, chrome plate,flushNEMA 1B120/240V dual voltage(120PSB lamp)2 50GA622 182.00 13 unit surfacemountC = Momentary pushbutton, surface, label"FORWARD"B = Momentary pushbutton, surface, label"REVERSE"A = Momentary pushbutton, surface, label"STOP"NEMA 12 NO, 2 NC (2 - 50ZAC2)1NO - 1NC with commonjumper (50ZAC1)3 50MA3KLE 98.00 1Pilot DevicesC = Momentary pushbutton, surface, label"UP"B = Momentary pushbutton, surface, label"DOWN"A = Momentary pushbutton, surface, label"STOP"C = Momentary pushbutton, surface, label"OPEN"B = Momentary pushbutton, surface, label"CLOSE"A = Momentary pushbutton, surface, label"STOP"NEMA 1NEMA 12 NO, 2 NC (2 - 50ZAC2)1NO - 1NC with commonjumper (50ZAC1)2 NO, 2 NC (2 - 50ZAC2)1NO - 1NC with commonjumper (50ZAC1)3 50MA3NPE 98.00 13 50MA3HJE 98.00 116-184Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PILO

Pushbutton Units and Indicator LightsClass 50 Standard Duty Pushbutton Stations5A 600V AC NEMA B600Selection and ordering data3 unit surfacemountOperator identificationC = Momentary pushbutton, surface, label"FAST"B = Momentary pushbutton, surface, label"SLOW"A = Momentary pushbutton, surface, label"STOP"Degree ofprotectionNEMA 1Contacts / voltage2 NO, 2 NC (2 - 50ZAC2)1NO - 1NC with commonjumper (50ZAC1)Numberof commandpointsOrder No.ListPrice $Pack1 unit Unit3 50MA3TUE 98.00 1C = Momentary pushbutton, surface, label"START"B = Momentary pushbutton, surface, label"JOG"A = Momentary pushbutton, surface, label"STOP"NEMA 12 NO, 2 NC (2 - 50ZAC2)1NO - 1NC with commonjumper (50ZAC1)3 50MA3DME 98.00 1C = Momentary pushbutton, surface, labelless insertB = Momentary pushbutton, surface, labelless insertA = Momentary pushbutton, surface. labelless insertNEMA 12 NO, 2 NC (2 - 50ZAC2)1NO - 1NC with commonjumper (50ZAC1)3 50MA3AAA 92.00 1C = Momentary pushbutton, surface, label"START"B = Momentary pushbutton, surface, label"STOP"A = Maintained selector switch, surface,label "HAND-OFF-AUTO"NEMA 11 NO, 1 NC (50ZAC2)2 NO, 2 SPST with commonjumper (50ZAC8)3 50LA3DEC3 148.00 1C = Momentary pushbutton, less insert, surfaceNEMA 1B = Momentary pushbutton, less insert, surfaceA = Maintained selector switch, multiple legends,surface1 NO, 1 NC (50ZAC2)2 NO, 2 SPST with commonjumper (50ZAC8)3 50LA3AAB9 144.00 1C = Indicator light, red, surfaceB = Momentary pushbutton, surface, label"START"A = Momentary pushbutton, surface, label"STOP"C = Indicator light, green, surfaceB = Momentary pushbutton, surface, label"START"A = Momentary pushbutton, surface, label"STOP"NEMA 1NEMA 1120/240V dual voltage(120PSB lamp)1 NO, 1 NC (50ZAC2)120/240V dual voltage(120PSB lamp)1 NO, 1 NC (50ZAC2)3 50JA3YDE 180.00 13 50JA3ZDE 180.00 116 CONTROLPRODUCTSC = Indicator light, less lens, surfaceB = Momentary pushbutton, less insert, surfaceA = Momentary pushbutton, less insert, surfaceNEMA 1120/240V dual voltage(120PSB lamp)1 NO, 1 NC (50ZAC2)3 50JA32AA 170.00 1C = Indicator light, green, surfaceB = Indicator light, red, surfaceA = Maintained selector switch, surface,label "HAND-OFF-AUTO"NEMA 1120/240V dual voltage(120PSB lamp)2 NO, 2 SPST with commonjumper (50ZAC8)3 50NA3ZYC3 230.00 1C = Indicator light, less lens, surface NEMA 1B = Indicator light, less lens, surfaceA = Maintained selector switch, multiple legends,surface120/240V dual voltage(120PSB lamp)2 NO, 2 SPST with commonjumper (50ZAC8)3 50NA322B9 218.00 1Pilot DevicesDiscount Schedule PILOSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-185

Pushbutton Units and Indicator LightsClass 50 Standard Duty Pushbutton StationsHeavy Duty - 10A 600V NEMA B600Selection and ordering dataOperator identificationDegree ofprotectionContacts / voltageNumberof commandpointsOrder No.ListPrice $Pack1 unit UnitA = Momentary pushbutton, surface,label "START" – GreenNEMA 4 1NO - 1NC 1 50HA1E1 213.00 1A = Momentary pushbutton, surface,label "STOP" – RedNEMA 4 1NO - 1NC 1 50HA1E2 213.00 1A = Momentary pushbutton, surface,label "RESET" – GreenNEMA 4 1NO - 1NC 1 50HA1E4 213.00 1A = Momentary pushbutton, surface, label"JOG" – GreenNEMA 4 1NO - 1NC 1 50HA1E5 213.00 1A = Maintained selector switch, surface,label "SAFE-RUN"NEMA 4 1NO - 1NC 1 50HA1E6 222.00 1A = Maintained selector switch, surface,label "OFF-ON"NEMA 4 1NO - 1NC 1 50HA1E7 222.00 1A = Maintained selector switch, surface,label "JOG-RUN" – GreenNEMA 4 1NO - 1NC 1 50HA1E8 222.00 1A = Maintained selector switch, surface,label "HAND-OFF-AUTO"NEMA 4 1NO - 1NC 1 50HA1E9 222.00 1Art to ComeB = Momentary pushbutton, surface,label "START" – GreenA = Momentary pushbutton, surface,label "STOP" – RedNEMA 41NO - 1NC1NO - 1NC2 50HA2E1 301.00 1B = Momentary pushbutton, surface,label "FORWARD" – GreenA = Momentary pushbutton, surface,label "REVERSE" – RedNEMA 41NO - 1NC1NO - 1NC2 50HA2E2 301.00 1B = Momentary pushbutton,P surface,label "UP" – GreenA = Momentary pushbutton, surface,label "DOWN" – RedNEMA 41NO - 1NC1NO - 1NC2 50HA2E3 301.00 116B = Momentary pushbutton, surface,label "OPEN" – GreenA = Momentary pushbutton, surface,label "CLOSE" – RedNEMA 41NO - 1NC1NO - 1NC2 50HA2E4 301.00 1CONTROLPRODUCTSB = Momentary pushbutton, surface,label "FAST" – GreenA = Momentary pushbutton, surface,label "SLOW" – RedC = Momentary pushbutton, surface,label "FORWARD" – GreenB = Momentary pushbutton, surface,label "REVERSE" – GreenA = Momentary pushbutton, surface,label "STOP" – RedNEMA 4NEMA 41NO - 1NC1NO - 1NC1NO - 1NC1NO - 1NC1NO - 1NC2 50HA2E5 301.00 13 50HA3E1 395.00 1C = Momentary pushbutton, surface,label "UP" – GreenB = Momentary pushbutton, surface,label "DOWN" – GreenA = Momentary pushbutton, surface,label "STOP" – RedNEMA 41NO - 1NC1NO - 1NC1NO - 1NC3 50HA3E2 395.00 1C = Momentary pushbutton, surface,label "OPEN" – GreenB = Momentary pushbutton, surface,label "CLOSE" – GreenA = Momentary pushbutton, surface,label "STOP" – RedNEMA 41NO - 1NC1NO - 1NC1NO - 1NC3 50HA3E3 395.00 1C = Momentary pushbutton, surface,label "START" – GreenB = Momentary pushbutton, surface,label "JOG" – GreenA = Momentary pushbutton, surface,label "STOP" – RedNEMA 41NO - 1NC1NO - 1NC1NO - 1NC3 50HA3E9 395.00 1Pilot DevicesC = Momentary pushbutton, surface,label "FAST" – GreenB = Momentary pushbutton, surface,label "SLOW" – GreenA = Momentary pushbutton, surface,label "STOP" – RedNEMA 41NO - 1NC1NO - 1NC1NO - 1NC3 50HA3E4 395.00 116-186Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PILO

Pushbutton Units and Indicator LightsClass 50 Standard Duty Pushbutton StationsStandard Duty Station AccessoriesSelection and ordering dataLegend inscription insert for snap-on mountingInscription Color Order No. List PackPrice $1 unit UnitCloseDownFastForwardHighHoistJogLowLowerOffOnOpenReverseSlowStartStopStop (raised)UpOrangeOrangeBlackGreenBlackGreenBlackBlackOrangeRedGreenGreenOrangeBlackGreenRedRedGreen50D5349300550D5349301050D5349301350D5349300650D5349301550D5349301150D5349300850D5349301650D5349301250D5349301850D5349301750D5349300450D5349300750D5349301450D5349300150D5349300250D5349300350D534930092.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.002.0011111111111111111150ZAC150ZAC2Version Suitable for Color Order No. List PackPrice $1 unit UnitMushroom headPadlock attachmentMechanical interlock kitContact blocks1NO, 1NC2NO, 2SPST1NO, 1NC1NO, 1NOUsed only for raised buttonsSingle buttonSelector switchTwo buttonTwo buttonRed50ZMH50ZAL50ZAM50ZAC150ZAC850ZAC250ZAC316.4024.5012.4024.5024.5024.5024.50111111150ZAC850ZAC3Pilot lightPilot light lensPendant BracketReplacement lampsSlide base, lamp type 120PSB120/240V Dual Voltage, nolens1 & 2 unit station3 unit stationRedGreen50ZAC650ZPL0150ZPL0250ZAP250ZAP360.006.206.208.208.20Class 50 type 1, 1B 120V 50D21983001 8.50 11111116 CONTROLPRODUCTSHeavy Duty Station AccessoriesVersion Suitable for Color Order No. List PackPrice $1 unit UnitPushbutton capsNEMA 4 control stationsNEMA 4 control stationsRedBlackBHP15XBHP16X66.0066.0011Pilot DevicesDiscount Schedule PILOSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-187

Pushbutton Units and Indicator LightsClass 50 Standard Duty Pushbutton StationsDimension drawingsStandard Duty - 5A 600V NEMA B6001 Unit Station Surface Mounting—Type 1 1 Unit Station Flush Mounting—Type 1B2 Pushbutton Stations Surface Mounting—Type 12 Pushbutton Stations Flush Mounting—Type 1B162 Unit Stations Surface Mounting—Type 1 2 Unit Station Flush Mounting—Type 1BPilot DevicesCONTROLPRODUCTS3 Unit Stations Surface Mounting 1 Unit Stations—Type 416-188Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Pushbutton Complete UnitsFeatures• Octagonal Mounting Nuts• Meets Type 1, 3, 4, 12, 13 and AutomotiveStandards• Heavy Duty Rated NEMA A600 Contacts• Positive Indexing Selectors• Bifurcated Movable Contacts• Attractive Chrome Plating• Boots Not Required for Type 4• UL Listed File # E22655• CSA Certified File # LR6535• Touchsafe TerminalsApplicationOil tight pilot controls and accessories aredesigned to provide long, trouble free servicein the most demanding industrial applications.These controls are oil and dust tightand meet Type 3, 4, 12 and 13 specifications.RuggedIndustrial control operators are durable onepiece castings. Heavy duty plastic buttonsresist oils and corrosion. Silver contacts withgold flashing carry heavy duty ratings whileallowing for low-voltage applications.FlexibleAccessories modify standard push buttons,selector switches and pilot lights. Buildingblock construction of contact blocks makespossible many circuitry combinations.Industrial AppearancePilot controls add luster to panels. Chromeplating covers exposed metal parts.Push Button OperatorsThe Operator Base consists of a durable,one piece casting equipped with a heavyduty actuator with a stainless steel spring, aneoprene actuator sealing ring to prevent oiland dust from penetrating to the contactblocks, a neoprene gasket to seal operatormounting hole and a chrome plated lock nut.Mushroom Head Push Button OperatorsThe Mushroom Head base construction isidentical to the push button base. The actuatoris molded of high impact material for eithera 1 5⁄8 inch or 2 1⁄2 inch diametermolded head.Contact BlocksContact Blocks have double break bifurcatedsilver contacts, with gold flashing asstandard, which improve contact fidelity.Contact blocks are heavy duty rated NEMAA600 and suitable for applications down to5V/1MA solid state outputs. Molded bodiesand pushers resist arcing and tracking. Allunits have stainless steel springs that resistcorrosion and provide strong contact pressure.Captive mounting screws speed panelassembly.Push Pull OperatorsPush Pull Operators combine two or threefunctions in one unit. The maintained operatorhas two positions, typically pull to start,push to stop. The momentary operator withthree positions provides spring return fromboth pull and push positions. These units arealso available with a pilot light.2 Button Maintained OperatorMaintained Push Buttons consist of two pushbuttons and a latching assembly. When actuatedthe button remains depressed and isfreed only by the release operator to which itis linked. The button assembly adjusts formounting from a 1 13⁄16 inch to a 2 5⁄8 inchcenter.Transformer Type Pilot LightsTransformer Type Pilot Lights are availablewith a 120, 240, 480 or 600 Volt primary (50/60 Hertz) and a separate secondary windingwhich supplies reduced voltage to a miniaturebayonet base 6 Volt lamp. These unitsare suitable for applications where vibrationis present and long bulb life is desirable.Full Voltage Type Pilot LightsFull Voltage Pilot Lights are available for 6,12, 24, 120 and 240 Volt AC and DC applications.The 240 Volt pilot light is supplied witha 120 Volt lamp and a voltage dropping resistorLED Type Pilot LightsLED’s (light emitting diodes) can be used inpilot lights instead of incandescent bulbs becauseof their long life (up to 10 years), resistanceto vibration and ambient sensitivity.Selector OperatorsSelector Operators have positive action indexing.Operators are available with either ashort or long lever. The molded black lever isdesigned to accept a color insert. A white insertis provided as standard. Each operatoris equipped with a cam to actuate plungersof contact blocks assembled behind the operator.Two, three and four position operatorsare available with seven different cams.Lever color inserts are available in 8 colors.Electrical RatingsNEMA AC Ratings 50/60HzNEMA A600 10 Continuous AmpsVolts Make Break120 60 6240 30 3480 15 1.5600 12 1.2VA 7200 720Ordering Information• Accessories see page 16-211.• Selector Position and Contact Operationpage 16-209.• Legend Plates see page 16-219.• Enclosures see page 16-220.16 CONTROLPRODUCTSPilot DevicesPilotLightPush ButtonSelector Operator Selector Push OperationSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-189

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Pushbutton Complete UnitsSelection and ordering dataMomentary Version Color ofactuatorContactblocksFlush caporder no. 1)Extended caporder no. 1)ListPriceMushroom headorder no. 1)ListPricePackPushbutton with flush capPushbutton unit withassembled contact blocks$ $ Unitblack 1 NO 52PA8A1K 52PA8B1K 34.50 52PB9 1K 59.00 1red 1 NO 52PA8A2K 52PA8B2K 34.50 52PB9 2K 59.00green 1 NO 52PA8A3K 52PA8B3K 34.50 52PB9 3K 59.00yellow 1 NO 52PA8A4K 52PA8B4K 34.50 52PB9 4K 59.00blue 1 NO 52PA8A5K 52PA8B5K 34.50 52PB9 5K 59.00gray 1 NO 52PA8A6K 52PA8B6K 34.50 52PB9 6K 59.00orange 1 NO 52PA8A8K 52PA8B8K 34.50 52PB9 8K 59.00black 1 NC 52PA8A1J 52PA8B1J 34.50 52PB9 1J 59.00 1red 1 NC 52PA8A2J 52PA8B2J 34.50 52PB9 2J 59.00green 1 NC 52PA8A3J 52PA8B3J 34.50 52PB9 3J 59.00yellow 1 NC 52PA8A4J 52PA8B4J 34.50 52PB9 4J 59.00Pushbutton with extended capblue 1 NC 52PA8A5J 52PA8B5J 34.50 52PB9 5J 59.00gray 1 NC 52PA8A6J 52PA8B6J 34.50 52PB9 6J 59.00orange 1 NC 52PA8A8J 52PA8B8J 34.50 52PB9 8J 59.00black 1 NO + 1 NC 52PA8A1A 52PA8B1A 47.00 52PB9 1A 71.00 1red 1 NO + 1 NC 52PA8A2A 52PA8B2A 47.00 52PB9 2A 71.00green 1 NO + 1 NC 52PA8A3A 52PA8B3A 47.00 52PB9 3A 71.00yellow 1 NO + 1 NC 52PA8A4A 52PA8B4A 47.00 52PB9 4A 71.00blue 1 NO + 1 NC 52PA8A5A 52PA8B5A 47.00 52PB9 5A 71.00gray 1 NO + 1 NC 52PA8A6A 52PA8B6A 47.00 52PB9 6A 71.00orange 1 NO + 1 NC 52PA8A8A 52PA8B8A 44.00 52PB9 8A 71.0016CONTROLPRODUCTSPushbutton with 1 5/8" mushroom headblack 2 NO 52PA8A1F 52PA8B1F 47.00 52PB9 1F 71.00 1red 2 NO 52PA8A2F 52PA8B2F 47.00 52PB9 2F 71.00green 2 NO 52PA8A3F 52PA8B3F 47.00 52PB9 3F 71.00yellow 2 NO 52PA8A4F 52PA8B4F 47.00 52PB9 4F 71.00blue 2 NO 52PA8A5F 52PA8B5F 47.00 52PB9 5F 71.00gray 2 NO 52PA8A6F 52PA8B6F 47.00 52PB9 6F 71.00orange 2 NO 52PA8A8F 52PA8B8F 47.00 52PB9 8F 71.00black 2 NC 52PA8A1G 52PA8B1G 47.00 52PB9 1G 71.00 1red 2 NC 52PA8A2G 52PA8B2G 47.00 52PB9 2G 71.00green 2 NC 52PA8A3G 52PA8B3G 47.00 52PB9 3G 71.00yellow 2 NC 52PA8A4G 52PA8B4G 47.00 52PB9 4G 71.00Order no. changeSmall operating head - 1 5/8" (41.3 mm)Large operating head - 2.5" (63.5 mm)blue 2 NC 52PA8A5G 52PA8B5G 47.00 52PB9 5G 71.00gray 2 NC 52PA8A6G 52PA8B6G 47.00 52PB9 6G 71.00orange 2 NC 52PA8A8G 52PA8B8G 47.00 52PB9 8G 71.00black 2 NO + 2 NC 52PA8A1B 52PA8B1B 72.00 52PB9 1B 96.00 1red 2 NO + 2 NC 52PA8A2B 52PA8B2B 72.00 52PB9 2B 96.00green 2 NO + 2 NC 52PA8A3B 52PA8B3B 72.00 52PB9 3B 96.00yellow 2 NO + 2 NC 52PA8A4B 52PA8B4B 72.00 52PB9 4B 96.00blue 2 NO + 2 NC 52PA8A5B 52PA8B5B 72.00 52PB9 5B 96.00gray 2 NO + 2 NC 52PA8A6B 52PA8B6B 72.00 52PB9 6B 96.00orange 2 NO + 2 NC 52PA8A8B 52PA8B8B 72.00 52PB9 8B 96.00DEPilot Devices1) For other contact block assemblies replace the 8th digit of the catalognumber as follows:C = 3 NO + 3 NCD = 4 NO + 4 NCE = 1 NC (EB)H = 1 NO (EM)16-190Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PILO

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Push Pull OperatorsSelection and ordering data2 position push-pullVersion Color of actuator Contactblocks2 Position Push Pull Maintained,Non IlluminatedMetal Mushroom Head,1 5/8" (41.3 mm)Order no.List Order no. List PackPricePrice$ $ Unitred 1 NC + 1 NO 52PA2A2A 98.00 1green 1 NC + 1 NO 52PA2A3A 98.00chrome 1 NC + 1 NO 52PA2ACA 98.0052PA2A2ASmall Plastic Mushroom Head,1 5/8" (41.3 mm)black 1 NC + 1 NO 52PA2W1A 88.00red 1 NC + 1 NO 52PA2W2A 88.00green 1 NC + 1 NO 52PA2W3A 88.0052PA2ACALarge Plastic Mushroom Head,2 1/2" (63.5 mm)black 1 NC + 1 NO 52PA2V1A 106.00red 1 NC + 1 NO 52PA2V2A 106.00green 1 NC + 1 NO 52PA2V3A 106.0052PA2V2A3 Position Push Pull Momentary,Non-Illuminated (Spring return tocenter-pull to start, push to stop) 1 )Metal Mushroom Head,1 5/8" (41.3 mm)red 1 NC + 1 NO 52PA3A2U 96.00green 1 NC + 1 NO 52PA3A3U 96.00chrome 1 NC + 1 NO 52PA3ACU 96.00152PA2W2A52PA3W2USmall Plastic Mushroom Head,1 5/8" (41.3 mm)Large Plastic Mushroom Head,2 1/2" (63.5 mm)black 1 NC + 1 NO 52PA3W1U 96.00red 1 NC + 1 NO 52PA3W2U 96.00green 1 NC + 1 NO 52PA3W3U 96.00black 1 NC + 1 NO 52PA3V1U 106.00red 1 NC + 1 NO 52PA3V2U 106.00green 1 NC + 1 NO 52PA3V3U 106.002 position push pullwith fully illuminatedmushroom head52PA2D2AOperatorswith incandescentlampOperatorswith LEDlamp***** 2 )2 Position Push Pull Maintained,Illuminated24V Full Voltage, type 757, or 24V less operating head 1 NC + 1 NO 52PA2DNA 119.00 ***** –––––LEDchrome red 1 NC + 1 NO 52PA2D2A 137.00 52PE2D2A 151.001 3/4" (44.5 mm)chrome green 1 NC + 1 NO 52PA2D3A 137.00 52PE2D3A 151.00chrome amber 1 NC + 1 NO 52PA2D9A 137.00 52PE2D9A 151.00full red 1 NC + 1 NO 52PA2DRA 137.00 52PE2DRA 151.00full green 1 NC + 1 NO 52PA2DSA 137.00 52PE2DSA 151.00full amber 1 NC + 1 NO 52PA2DTA 137.00 52PE2DTA 151.00116 CONTROLPRODUCTS52PA2DRA120V transformer with 6V 755 typelamp, or 6V LED1 3/4" (44.5 mm)less operating head 1 NC + 1 NO 52PA2GNA 119.00 ***** –––––chrome red 1 NC + 1 NO 52PA2G2A 137.00 52PE2G2A 151.00chrome green 1 NC + 1 NO 52PA2G3A 137.00 52PE2G3A 151.00chrome amber 1 NC + 1 NO 52PA2G9A 137.00 52PE2G9A 151.001full red 1 NC + 1 NO 52PA2GRA 137.00 52PE2GRA 151.00full green 1 NC + 1 NO 52PA2GSA 137.00 52PE2GSA 151.00full amber 1 NC + 1 NO 52PA3GTA 137.00 52PE2GTA 151.00240V transformer with 6V 755 typelamp, or 6V LED1 3/4" (44.5 mm)less operating head 1 NC + 1 NO 52PA2HNA 119.00 ***** –––––chrome red 1 NC + 1 NO 52PA2H2A 137.00 52PE2H2A 151.00chrome green 1 NC + 1 NO 52PA2H3A 137.00 52PE2H3A 151.00chrome amber 1 NC + 1 NO 52PA2H9A 137.00 52PE2H9A 151.001480V transformer with 6V 755 typelamp, or 6V LED1 3/4" (44.5 mm)less operating head 1 NC + 1 NO 52PA2JNA 119.00 ***** –––––chrome red 1 NC + 1 NO 52PA2J2A 137.00 52PE2J2A 151.00chrome green 1 NC + 1 NO 52PA2J3A 137.00 52PE2J3A 151.00chrome amber 1 NC + 1 NO 52PA2J9A 137.00 52PE2J9A 151.001600V transformer with 6V 755 typelamp, or 6V LED1 3/4" (44.5 mm)less operating head 1 NC + 1 NO 52PA2KNA 119.00 ***** –––––chrome red 1 NC + 1 NO 52PA2K2A 137.00 52PE2K2A 151.00chrome green 1 NC + 1 NO 52PA2K3A 137.00 52PE2K3A 151.00chrome amber 1 NC + 1 NO 52PA2K9A 137.00 52PE2K9A 151.001Pilot Devices1) Blocks cannot be interchanged (start-stop circuit).2) LED color must match lens color.Discount Schedule PILOSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-191

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Push Pull OperatorsSelection and ordering data3 position push-pullilluminatedVersion Color of actuator Contact Order no. List Order no. List Packblocks operators with Price operators with PriceincandescentLED type 2)lamp $$ Unit3 Position Push Pull Momentary,Illuminated, spring return to center 1 )24V Full Voltage 757 type, or 24V less operating head 1NC + 1NO 52PA3DNU 119.00 ***** –––––LEDchrome red 1NC + 1NO 52PA3D2U 137.00 52PE3D2U 151.0011 3/4" (44.5 mm) chrome green 1NC + 1NO 52PA3D3U 137.00 52PE3D3U 151.00chrome amber 1NC + 1NO 52PA3D9U 137.00 52PE3D9U 151.0052PA3D2U52PA3DRUfull red 1NC + 1NO 52PA3DRU 137.00 52PE3DRU 151.00full green 1NC + 1NO 52PA3DSU 137.00 52PE3DSU 151.00full amber 1NC + 1NO 52PA3DTU 137.00 52PE3DTU 151.00120V transformer with 6V 755 type less operating head 1NC + 1NO 52PA3GNU 119.00 ***** –––––lamp, or 6V LEDchrome red 1NC + 1NO 52PA3G2U 137.00 52PE3G2U 151.001 3/4" (44.5 mm) chrome green 1NC + 1NO 52PA3G3U 137.00 52PE3G3U 151.00chrome amber 1NC + 1NO 52PA3G9U 137.00 52PE3G9U 151.00full red 1NC + 1NO 52PA3GRU 137.00 52PE3GRU 151.00full green 1NC + 1NO 52PA3GSU 137.00 52PE3GSU 151.00full amber 1NC + 1NO 52PA3GTU 137.00 52PE3GTU 151.00240V transformer with 6V 755 type less operating head 1NC + 1NO 52PA3HNU 119.00 ***** –––––lamp, or 6V LEDchrome red 1NC + 1NO 52PA3H2U 137.00 52PE3H2U 151.001 3/4" (44.5 mm) chrome green 1NC + 1NO 52PA3H3U 137.00 52PE3H3U 151.00chrome amber 1NC + 1NO 52PA3H9U 137.00 52PE3H9U 151.00480V transformer with 6V 755 type less operating head 1NC + 1NO 52PA3JNU 119.00 ***** –––––lamp, or 6V LEDchrome red 1NC + 1NO 52PA3J2U 137.00 52PE3J2U 151.001 3/4" (44.5 mm) chrome green 1NC + 1NO 52PA3J3U 137.00 52PE3J3U 151.00chrome amber 1NC + 1NO 52PA3J9U 137.00 52PE3J9U 151.001111116600V transformer with 6V 755 type less operating head 1NC + 1NO 52PA3KNU 119.00 ***** –––––lamp, or 6V LEDchrome red 1NC + 1NO 52PA3K2U 137.00 52PE3K2U 151.001 3/4" (44.5 mm) chrome green 1NC + 1NO 52PA3K3U 137.00 52PE3K3U 151.00chrome amber 1NC + 1NO 52PA3K9U 137.00 52PE3K9U 151.001Pilot DevicesCONTROLPRODUCTS1) Blocks cannot be interchanged (start-stop circuit).2) LED color must match lens color.16-192Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PILO

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Selector Switch Complete UnitsSelection and ordering dataVersion Lever type ContactblocksCam 1 ) Order no. ListPricePackShort lever assembledselector switch$ unitSelector Switches with 2 switching positionsMaintained operation Short lever, non-Illuminated 1NO A 52SA2AABK1 42.50 1Short lever, non-Illuminated 1NC A 52SA2AABJ1 42.50Short lever, non-Illuminated 1NO + 1NC A 52SA2AABA1 55.00Long lever, non-Illuminated 1NO A 52SB2AABK1 42.50Long lever, non-Illuminated 1NC A 52SB2AABJ1 42.50Long lever, non-Illuminated 1NO + NC A 52SB2AABA1 55.00Spring return from right operation Short lever, non-Illuminated 1NO A 52SA2ACBK1 59.00 1Short lever, non-Illuminated 1NC A 52SA2ACBJ1 59.00Short lever, non-Illuminated 1NO + 1NC A 52SA2ACBA1 72.00Long lever, non-Illuminated 1NO A 52SB2ACBK1 59.00Long lever, non-Illuminated 1NC A 52SB2ACBJ1 59.00Long lever, non-Illuminated 1NO + 1NC A 52SB2ACBA1 72.00Long lever assembledselector switchSelector Switches with 3 switching positionsMaintained operation Short lever, non-Illuminated 1NO + 1NC C 52SA2CABA1 55.00 1Short lever, non-Illuminated 2NC + 1NO G 52SA2GABJ2K1 67.00Short lever, non-Illuminated 2NO + 2NC C 52SA2CABA2 80.00Long lever, non-Illuminated 1NO + 1NC C 52SB2CABA1 55.00Long lever, non-Illuminated 2NC + 1NO G 52SB2GABJ2K1 67.00Long lever, non-Illuminated 2NO + 2NC C 52SB2CABA2 80.00Spring return from right 2 ) Short lever, non-Illuminated 1NO + 1NC C 52SA2CCBA1 72.00 1Short lever, non-Illuminated 2NC + 1NO G 52SA2GCBJ2K1 84.00Short lever, non-Illuminated 2NO + 2NC C 52SA2CCBA2 96.00Long lever, non-Illuminated 1NO + 1NC C 52SB2CCBA1 72.00Long lever, non-Illuminated 2NC + 1NO G 52SB2GCBJ2K1 84.00Long lever, non-Illuminated 2NO + 2NC C 52SB2CCBA2 96.00Spring return from right & left operation Short lever, non-Illuminated 1NO + 1NC C 52SA2CDBA1 72.00 1Short lever, non-Illuminated 2NC + 1NO G 52SA2GDBJ2K1 84.00Short lever, non-Illuminated 2NO + 2NC C 52SA2CDBA2 96.00Long lever, non-Illuminated 1NO + 1NC C 52SB2CDBA1 72.00Long lever, non-Illuminated 2NC + 1NO G 52SB2GDBJ2K1 84.00Long lever, non-Illuminated 2NO + 2NC C 52SB2CDBA2 96.0016 CONTROLPRODUCTSAssembled keyedselector switchKey-operated selector switches, 2 switching positionsMaintained operation Key removable in left positions 1NO A 52SC6AFK1 92.00Key removable in left positions 1NC A 52SC6AFJ1 92.00Key removable in left positions 1NO + 1NC A 52SC6AFA1 105.00Spring return from right operation Key removable in left positions 1NO A 52SC6AXK1 108.00Key removable in left positions 1NC A 52SC6AXJ1 108.00Key removable in left positions 1NO + 1NC A 52SC6AXA1 121.0011Key-operated selector switches, 3 switching positionsMaintained operation Key removable in all positions 1NC + 1NO C 52SC6CEA1 105.00Key removable in all positions 2NC + 1NO G 52SC6GEJ2K1 117.00Key removable in all positions 2NO + 2NC C 52SC6CEA2 129.00Spring return from right operation 3 ) Key removable in all positions 1NO + 1NC C 52SC6CZA1 121.00Key removable in all positions 2NC + 1NO G 52SC6GZJ2K1 133.00Key removable in all positions 2NO + 2NC C 52SC6CZA2 145.00Spring return from right & left operation Key removable in all positions 1NO + 1NC C 52SC6CVA1 121.00Key removable in all positions 2NC + 1NO G 52SC6GVJ2K1 133.00Key removable in all positions 2NO + 2NC C 52SC6CVA2 145.00111Pilot Devices1) For contact operation, see cam selection table on page 16-209.2) Spring return from left available by substituting "BB" for "CB" in the ordernumber. Eg. 52SA2CBBA1.Discount Schedule PILO3) Spring return from left available by substituting "CY" for "CZ" in the ordernumber. Eg. 52SC6CYA1.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-193

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Indicator Light OperatorsSelection and ordering dataPilot lightVersion Color of actuator Order no. ListPriceOperatorswith Incandescentlamp $Indicator light with plastic lens -Full voltage type AC/DC 1 ) 2 )Order no.ListPricePackOperatorswith LEDlamp 3 ) $ Unit6-8V with 755 type, or 6V LED red 52PA4B2 72.00 52PE4B2 86.00 1green 52PA4B3 72.00 52PE4B3 86.00amber 52PA4B9 72.00 52PE4B9 86.00less lens 52PA4BN 66.00 —12Vwith 756 typered52PA4C2 72.00green 52PA4C3 72.00amber 52PA4C9 72.00less lens 52PA4CN 66.0024V with 757 type, or 24V LED red 52PA4D2 72.00 52PE4D2 86.00green 52PA4D3 72.00 52PE4D3 86.00amber 52PA4D9 72.00 52PE4D9 86.00less lens 52PA4DN 66.00 — –––––120V with 120MB type, or 120V LED red 52PC4E2 72.00 52PE4E2 86.00green 52PC4E3 72.00 52PE4E3 86.00amber 52PC4E9 72.00 52PE4E9 86.00less lens 52PC4EN 66.00 — –––––111Indicator light with plastic lens -Transformer type AC 1 ) 2 )120V with 6V 755 type lamp, or 6V LED red 52PA4G2 88.00 52PE4G2 102.00 1green 52PA4G3 88.00 52PE4G3 102.00amber 52PA4G9 88.00 52PE4G9 102.00less lens 52PA4GN 82.00 — –––––16CONTROLPRODUCTS240V with 6V 755 type lamp, or 6V LED red 52PA4H2 88.00 52PE4H2 102.00green 52PA4H3 88.00 52PE4H3 102.00amber 52PA4H9 88.00 52PE4H9 102.00less lens 52PA4HN 82.00 — –––––277V with 6V 755 type lamp, or 6V LED red 52PA4T2 88.00 52PE4T2 102.00green 52PA4T3 88.00 52PE4T3 102.00amber 52PA4T9 88.00 52PE4T9 102.00less lens 52PA4TN 82.00 — –––––11480V with 6V 755 type lamp, or 6V LED red 52PA4J2 88.00 52PE4J2 102.00green 52PA4J3 88.00 52PE4J3 102.00amber 52PA4J9 88.00 52PE4J9 102.00less lens 52PA4JN 82.00 — –––––600V with 6V 755 type lamp, or 6V LED red 52PA4K2 88.00 52PE4K2 102.00green 52PA4K3 88.00 52PE4K3 102.00amber 52PA4K9 88.00 52PE4K9 102.00less lens 52PA4KN 82.00 — –––––11Indicator light with plastic lens -Resistor type AC/DC 1 ) 2 )240V with 120V 120MB type lamp, or 120VLEDred 52PC4N2 72.00 52PE4N2 86.00green 52PC4N3 72.00 52PE4N3 86.00amber 52PC4N9 72.00 52PE4N9 86.00less lens 52PC4NN 66.00 — –––––1Color code table: blueclearwhite5AB5ABPilot Devices1) All illuminated devices come with std. Touchsafeshield per UL stds.2) For factory installed glass lens, replace the 5thcharacter with "5".3) LED color must match lens color. Consult Factoryfor Neon types.16-194Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PILO

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Push to Test UnitsSelection and ordering dataVersionColor ofactuatorContactblocksOrder no. ListPriceOperatorswith Incandescentlamp $Order no.ListPricePackOperatorswith LEDlamp 2 ) $ UnitIlluminated pushbuttons/Push to testindicator light with plastic lens -Full voltage type AC/DC 1 ) 3 )Push to test/illuminated 6-8V with 755 type, or 6V LED red 1NO + 1NC 52PA6B2A 96.00 52PE6B2A 110.00 1pushbutton green 1NO + 1NC 52PA6B3A 96.00 52PE6B3A 110.00amber 1NO + 1NC 52PA6B9A 96.00 52PE6B9A 110.00less lens 1NO + 1NC 52PA6BNA 91.00 — –––––52PA6D2A24V with 757 type, or 24V LED red 1NO + 1NC 52PA6D2A 96.00 52PE6D2A 110.00green 1NO + 1NC 52PA6D3A 96.00 52PE6D3A 110.00amber 1NO + 1NC 52PA6D9A 96.00 52PE6D9A 110.00less lens 1NO + 1NC 52PA6DNA 91.00 — –––––Illuminated pushbuttons/Push to testindicator light with plastic lens - Transformertype AC 1 ) 3 )120V with 6V 755 type lamp, or 6V LED red 1NC + 1NO 52PA6G2A 112.00 52PE6G2A 126.00 1green 1NC + 1NO 52PA6G3A 112.00 52PE6G3A 126.00amber 1NC + 1NO 52PA6G9A 112.00 52PE6G9A 126.00less lens 1NC + 1NO 52PA6GNA 107.00 — –––––152PA6G2A240V with 6V 755 type lamp, or 6V LED red 1NC + 1NO 52PA6H2A 112.00 52PE6H2A 126.00green 1NC + 1NO 52PA6H3A 112.00 52PE6H3A 126.00amber 1NC + 1NO 52PA6H9A 112.00 52PE6H9A 126.00less lens 1NC + 1NO 52PA6HNA 107.00 — –––––1480V with 6V 755 type lamp, or 6V LED red 1NC + 1NO 52PA6J2A 112.00 52PE6J2A 126.00green 1NC + 1NO 52PA6J3A 112.00 52PE6J3A 126.00amber 1NC + 1NO 52PA6J9A 112.00 52PE6J9A 126.00less lens 1NC + 1NO 52PA6JNA 107.00 — –––––600V with 6V 755 type lamp, or 6V LED red 1NC + 1NO 52PA6K2A 112.00 52PE6K2A 126.00green 1NC + 1NO 52PA6K3A 112.00 52PE6K3A 126.001amber 1NC + 1NO 52PA6K9A 112.00 52PE6K9A 126.00less lens 1NC + 1NO 52PA6KNA 107.00 — –––––Push to test indicator light withplastic lens - Resistor type AC/DC 3 )120V with 24V 757 type lamp, or 24V LED red 1NC + 1NO 52PA6M2A 96.00 52PE6M2A 110.00 1green 1NC + 1NO 52PA6M3A 96.00 52PE6M3A 110.00amber 1NC + 1NO 52PA6M9A 96.00 52PE6M9A 110.00less lens 1NC + 1NO 52PA6MNA 91.00 — –––––116 CONTROLPRODUCTS240V with 24V 757 type lamp, or 24V LED red 1NC + 1NO 52PA6N2A 96.00 52PE6N2A 110.00green 1NC + 1NO 52PA6N3A 96.00 52PE6N3A 110.00amber 1NC + 1NO 52PA6N9A 96.00 52PE6N9A 110.00less lens 1NC + 1NO 52PA6NNA 91.00 — –––––1Color code table: blueclearwhite5AB5ABWiring DiagramsIlluminated Push ButtonPush to TestPilot Devices1) All illuminated devices come with std. Touch-safe shield per UL stds.2) LED color must match lens color. Consult Factory for Neon types.3) For factory installed lens guard, add suffix "V".Discount Schedule PILOSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-195

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Pushbutton Operators OnlySelection and ordering dataVersion Color of actuator Order no. ListPricePackFlush pushbutton operator$ UnitPushbutton with flush cap black 52PA8A1 22.00 1red 52PA8A2 22.00green 52PA8A3 22.00yellow 52PA8A4 22.00blue 52PA8A5 22.00gray 52PA8A6 22.00orange 52PA8A8 22.00less cap 52PA8 20.50kit with all colors 52PA8AN 25.50Pushbutton with extended cap black52PA8B1 22.00 1red 52PA8B2 22.00green 52PA8B3 22.00yellow 52PA8B4 22.00blue 52PA8B5 22.00gray 52PA8B6 22.00orange 52PA8B8 22.00less cap 52PA8 20.50kit with all colors 52PA8BN 25.50Pushbutton with mushroom cap black 52PB9D1 46.50 11 5/8" (41.3mm) red 52PB9D2 46.50green 52PB9D3 46.50yellow 52PB9D4 46.5016CONTROLPRODUCTSblue 52PB9D5 46.50gray 52PB9D6 46.50orange 52PB9D8 46.50less cap 52PB9 38.50kit with all colors 52PB9DN 49.00Pushbutton with mushroom cap black 52PB9E1 55.00 12 1/2" (63.5mm)red 52PB9E2 55.00green 52PB9E3 55.00yellow 52PB9E4 55.002 position push pull operatorblue 52PB9E5 55.00gray 52PB9E6 55.00orange 52PB9E8 55.00less cap 52PB9 38.50less cap with lens kit 52PB9EN 49.002 position push pull maintained, non illuminatedMetal Mushroom Head, 1 5/8" (41.3 mm) red 52PA2A2 73.00 1(Threaded) green 52PA2A3 73.00chrome 52PA2AC 73.00Small Plastic Mushroom Head, 1 5/8" (41.3 mm) black 52PA2W1 63.00(Set Screw) red 52PA2W2 63.00green 52PA2W3 63.00Large Plastic Mushroom Head, 2 1/2" (63.5 mm) black 52PA2V1 71.00(Set Screw) red 52PA2V2 71.00green 52PA2V3 71.0011Pilot Devices16-196Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PILO

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Selector Switch OperatorsSelection and ordering dataVersionLever typeColor ofleverinsertCam Input Order no.Code 2 ) Voltage$ unitSelector Switches with 2 switching positionsMaintained operation Non-Illuminated, short lever White A 52SA2AAB 30.50 1Non-Illuminated, long lever White A 52SB2AAB 30.50Illuminated, short lever 1 ) A 24V 52SA7ADN 73.00 1with full voltage 24V, 757 type lampIlluminated, short lever 1 ) A 120V 52SA7AGN 91.00 1with 50/60 Hz transformer 6V, A 240V 52SA7AHN 91.00755 type lamp A 24V 52SA7ALN 91.00Spring return from right operation Non-Illuminated, short lever White A 52SA2ACB 47.00 1Non-Illuminated, long lever White A 52SB2ACB 47.00ListPricePackSelector Switches with 3 switching positionsMaintained operation Non-Illuminated, short lever White B 52SA2BAB 30.50 1Non-Illuminated, long lever White B 52SB2BAB 30.50Non-Illuminated, short lever White C 3 ) 52SA2CAB 30.50Non-Illuminated, long lever White C 3 ) 52SB2CAB 30.50Non-Illuminated, short lever White D 52SA2DAB 30.50Non-Illuminated, long lever White D 52SB2DAB 30.50Non-Illuminated, short lever White E 52SA2EAB 30.50Non-Illuminated, long lever White E 52SB2EAB 30.50Non-Illuminated, short lever White G 52SA2GAB 30.50Non-Illuminated, long lever White G 52SB2GAB 30.50Illuminated, short lever 1 ) B 24V 52SA7BDN 73.00 1with full voltage 24V, 757 type lamp C 3 ) 24V 52SA7CDN 73.00Illuminated, short lever 1 ) B 120V 52SA7BGN 91.00 1with 50/60 Hz transformer 6V, C 3 ) 120V 52SA7CGN 91.00755 type lamp B 240V 52SA7BHN 91.00C 3 ) 240V 52SA7CHN 91.00B 24V 52SA7BLN 91.00C 24V 52SA7CLN 91.00Spring return from right operation Non-Illuminated, short lever White B 52SA2BCB 47.00 1Non-Illuminated, long lever White B 52SB2BCB 47.00Non-Illuminated, short lever White C 3 ) 52SA2CCB 47.00Non-Illuminated, long lever White C 3 ) 52SB2CCB 47.00Non-Illuminated, short lever White D 52SA2DCB 47.00Non-Illuminated, long lever White D 52SB2DCB 47.00Non-Illuminated, short lever White E 52SA2ECB 47.00Non-Illuminated, long lever White E 52SB2ECB 47.00Non-Illuminated, short lever White G 52SA2GCB 47.00Non-Illuminated, long lever White G 52SB2GCB 47.0016 CONTROLPRODUCTSSpring return from left operation Non-Illuminated, short lever White B 52SA2BBB 47.00 1Non-Illuminated, long lever White B 52SB2BBB 47.00Non-Illuminated, short lever White C 3 ) 52SA2CBB 47.00Non-Illuminated, long lever White C 3 ) 52SB2CBB 47.00Non-Illuminated, short lever White D 52SA2DBB 47.00Non-Illuminated, long lever White D 52SB2DBB 47.00Non-Illuminated, short lever White E 52SA2EBB 47.00Non-Illuminated, long lever White E 52SB2EBB 47.00Non-Illuminated, short lever White G 52SA2GBB 47.00Non-Illuminated, long lever White G 52SB2GBB 47.00Spring return from left and right operation Non-Illuminated, short lever White B 52SA2BDB 47.00 1Non-Illuminated, long lever White B 52SB2BDB 47.00Non-Illuminated, short lever White C 3 ) 52SA2CDB 47.00Non-Illuminated, long lever White C 3 ) 52SB2CDB 47.00Non-Illuminated, short lever White D 52SA2DDB 47.00Non-Illuminated, long lever White D 52SB2DDB 47.00Non-Illuminated, short lever White E 52SA2EDB 47.00Non-Illuminated, long lever White E 52SB2EDB 47.00Non-Illuminated, short lever White G 52SA2GDB 47.00Non-Illuminated, long lever White G 52SB2GDB 47.00Selector Switches with 4 switching positionsMaintained operation Non-Illuminated, short lever White H 52SA2HAB 30.50 1Non-Illuminated, long lever White H 52SB2HAB 30.50Pilot Devices1) Illuminated selector switches are providedwithout lenses. Lens kit must be ordered separatelyon page 16-211.2) For contact operation, see cam selelction charton page 16-209.3) The C cam is limited to 4 contact blocks, 1 or 2pole.Discount Schedule PILOSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-197

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Selector Switch OperatorsSelection and ordering dataVersion Button Position Color of Camlever insert Code 2 )Order no.ListPricePack$ unitSelector Pushbutton OperatorsNEMA 12/13 only Flush 2 Black P 52SA3P1 47.00 1Flush type cap Black Q 52SA3Q1 47.00Black R 52SA3R1 47.00Flush 2 Red P 52SA3P2 47.00 1Red Q 52SA3Q2 47.00Red R 52SA3R2 47.00Flush 3 Black S 52SA3S1 47.00 1Red S 52SA3S2 47.001/2" raised type cap Extended 2 Black P 52SA4P147.00Black Q 52SA4Q1 47.00Black R 52SA4R1 47.001Extended 2 Red P 52SA4P2 47.00 1Red Q 52SA4Q2 47.00Red R 52SA4R2 47.00Extended 3 Black S 52SA4S1 47.00 1Red S 52SA4S2 47.00Pilot DevicesCONTROLPRODUCTS161) For contact operation, see cam selection charton page 16-209.16-198Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PILO

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Selector Switch OperatorsSelection and ordering dataVersionKey removal Lock No. Cam Order no.List PackpositionCode 1 )Price$ unit2 Pos spring return from right to center Left 501CH A 52SC6AX 80.00 1Key-operated selector Switches with 2 switching positionsMaintained operationBoth501CH A 52SC6AE 80.00 1Left 501CH A 52SC6AF 80.00Key-operated selector Switches with 3 switching positionsMaintained operationAll501CH B 52SC6BE 80.00 1C 2 ) 52SC6CE 80.00D 52SC6DE 80.00E 52SC6EE 80.00G 52SC6GE 80.00Left 501CH B 52SC6BF 80.00 1C 2 ) 52SC6CF 80.00D 52SC6DF 80.00E 52SC6EF 80.00G 52SC6GF 80.00Right 501CH B 52SC6BG 80.00 1C 2 ) 52SC6CG 80.00D 52SC6DG 80.00E 52SC6EG 80.00G 52SC6GG 80.00Center 501CH B 52SC6BH 80.00 1C 2 ) 52SC6CH 80.00D 52SC6DH 80.00E 52SC6EH 80.00G 52SC6GH 80.00Left and right 501CH B 52SC6BJ 80.00 1C 2 ) 52SC6CJ 80.00D 52SC6DJ 80.00E 52SC6EJ 80.00G 52SC6GJ 80.00Left and center 501CH B 52SC6BK 80.00 1C 2 ) 52SC6CK 80.00D 52SC6DK 80.00E 52SC6EK 80.00G 52SC6GK 80.00Right and center 501CH B 52SC6BM 80.00 1C 2 ) 52SC6CM 80.00D 52SC6DM 80.00E 52SC6EM 80.00G 52SC6GM 80.00Spring return from right operation Center 501CH B 52SC6BU 96.00 1C 2 ) 52SC6CU 96.00D 52SC6DU 96.00E 52SC6EU 96.00G 52SC6GU 96.00Left and center 501CH B 52SC6BZ 96.00 1C 2 ) 52SC6CZ 96.00D 52SC6DZ 96.00E 52SC6EZ 96.00G 52SC6GZ 96.00Spring return from left operation Center 501CH B 52SC6BT 96.00 1C 2 ) 52SC6CT 96.00D 52SC6DT 96.00E 52SC6ET 96.00G 52SC6GT 96.00Right 501CH B 52SC6BW 96.00 1C 2 ) 52SC6CW 96.00D 52SC6DW 96.00E 52SC6EW 96.00G 52SC6GW 96.00Right and center 501CH B 52SC6BY 96.00 1C 2 ) 52SC6CY 96.00D 52SC6DY 96.00E 52SC6EY 96.00G 52SC6GY 96.00Spring return from left and right operation Center 501CH B 52SC6BV 96.00 1C 2 ) 52SC6CV 96.00D 52SC6DV 96.00E 52SC6EV 96.00G 52SC6GV 96.00Lock types keyed different from standard - up to 25 different keys .............................................................................................. 5 3 )To order special locks for keyed selector switches, append#550CH X298 1corresponding 'X' suffix to part number. (Same list price as standard key)#549CHX299#548CHX300Ordering example #547CH X30152SC6AEX298 #506CH X3021) For contact operation, see cam selection chart on page 16-209.3) Change the "6" to a "5" in the fifth position and add suffix "X", 25 diff. available.2) C cam limited to 4 single or double pole blocks on spring return operators.Discount Schedule PILOSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-19916 CONTROLPRODUCTSPilot Devices

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Special DevicesSelection and ordering dataVersion Ohms / color Order no. List Price Pack$ UnitPotentiometer operator 50 52MA3B01 164.00 12 Watts (Type 12/3 only)25052MA3B04 164.00500 52MA3B06 164.001 K 52MA3B08 164.002.5 K 52MA3B10 164.005 K 52MA3B12 164.0010 K 52MA3B14 164.0015 K 52MA3B15 164.0025 K 52MA3B16 164.00100 K 52MA3B20 164.00500 K 52MA3B24 164.002 M 52MA3B28 164.005 M 52MA3B31 164.002 Button maintained operator Black/red 52MA2A1A2 69.00 1Button remains depressed when pushed less caps 52MA2 66.00Wobble stick 2.5" operatorFor use with 52BAJ (NC) contact block red 52ABW2 2 ) 47.00 1green 52ABW3 2 ) 47.00gray 52ABW6 2 ) 47.00CONTROLPRODUCTSPilot Devices16Maintained toggle operator 52ABT 47.00 1Compact pilot lights - 11/16" mounting hole 1 ) / 18 mmTransformer type - 120V with 6V 755 type lamp red 52MA4G2 87.00 1green 52MA4G3 87.00blue 52MA4G5 87.00amber 52MA4G9 87.00clear 52MA4GA 87.00white 52MA4GB 87.00less lens 52MA4GN 82.00Legend plate for compact pilot light (1 7/16" x 1 7/16")Blank (brushed aluminum) 52NP02 2.40 1Custom engraved (brushed aluminum) 52NP02E 10.70 11) 11/16" mounting hole required2) For use with 52BAJ (NC) contact block16-200Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PILO

Pushbutton Units and Indicator Lights30 mm, Black Max Corrosion Resistant, Class 52 Complete UnitsSelection and ordering dataVersionColor ofactuatorContactblocksFlush caporder no. 1)Extended caporder no. 1)ListPriceMushroom headorder no. 1)ListPricePackFlush assembled pushbuttonPushbutton unit withassembled contact blocks$ $ Unitblack 1 NO 52PX8A1K 52PX8B1K 34.50 52PX9 1K 59.00 1red 1 NO 52PX8A2K 52PX8B2K 34.50 52PX9 2K 59.00green 1 NO 52PX8A3K 52PX8B3K 34.50 52PX9 3K 59.00yellow 1 NO 52PX8A4K 52PX8B4K 34.50 52PX9 4K 59.00blue 1 NO 52PX8A5K 52PX8B5K 34.50 52PX9 5K 59.00 1gray 1 NO 52PX8A6K 52PX8B6K 34.50 52PX9 6K 59.00orange 1 NO 52PX8A8K 52PX8B8K 34.50 52PX9 8K 59.00black 1 NC 52PX8A1J 52PX8B1J 34.50 52PX9 1J 59.00 1red 1 NC 52PX8A2J 52PX8B2J 34.50 52PX9 2J 59.00green 1 NC 52PX8A3J 52PX8B3J 34.50 52PX9 3J 59.00yellow 1 NC 52PX8A4J 52PX8B4J 34.50 52PX9 4J 59.00blue 1 NC 52PX8A5J 52PX8B5J 34.50 52PX9 5J 59.00 1gray 1 NC 52PX8A6J 52PX8B6J 34.50 52PX9 6J 59.00orange 1 NC 52PX8A8J 52PX8B8J 34.50 52PX9 8J 59.00Extended assembled pushbuttonblack 1 NO + 1 NC 52PX8A1A 52PX8B1A 47.00 52PX9 1A 71.00 1red 1 NO + 1 NC 52PX8A2A 52PX8B2A 47.00 52PX9 2A 71.00green 1 NO + 1 NC 52PX8A3A 52PX8B3A 47.00 52PX9 3A 71.00yellow 1 NO + 1 NC 52PX8A4A 52PX8B4A 47.00 52PX9 4A 71.00blue 1 NO + 1 NC 52PX8A5A 52PX8B5A 47.00 52PX9 5A 71.00 1gray 1 NO + 1 NC 52PX8A6A 52PX8B6A 47.00 52PX9 6A 71.00orange 1 NO + 1 NC 52PX8A8A 52PX8B8A 47.00 52PX9 8A 71.00Mushroom head assembled pushbuttonblack 2 NO 52PX8A1F 52PX8B1F 47.00 52PX9 1F 71.00 1red 2 NO 52PX8A2F 52PX8B2F 47.00 52PX9 2F 71.00green 2 NO 52PX8A3F 52PX8B3F 47.00 52PX9 3F 71.00yellow 2 NO 52PX8A4F 52PX8B4F 47.00 52PX9 4F 71.00blue 2 NO 52PX8A5F 52PX8B5F 47.00 52PX9 5F 71.00 1gray 2 NO 52PX8A6F 52PX8B6F 47.00 52PX9 6F 71.00orange 2 NO 52PX8A8F 52PX8B8F 47.00 52PX9 8F 71.00black 2 NC 52PX8A1G 52PX8B1G 47.00 52PX9 1G 71.00 1red 2 NC 52PX8A2G 52PX8B2G 47.00 52PX9 2G 71.00green 2 NC 52PX8A3G 52PX8B3G 47.00 52PX9 3G 71.00yellow 2 NC 52PX8A4G 52PX8B4G 47.00 52PX9 4G 71.0016 CONTROLPRODUCTSOrder no. changeSmall operating head - 1 5/8" (41.3 mm)Large operating head - 2.5" (63.5 mm)blue 2 NC 52PX8A5G 52PX8B5G 47.00 52PX9 5G 71.00 1gray 2 NC 52PX8A6G 52PX8B6G 47.00 52PX9 6G 71.00orange 2 NC 52PX8A8G 52PX8B8G 47.00 52PX9 8G 71.00black 2 NO + 2 NC 52PX8A1B 52PX8B1B 72.00 52PX9 1B 96.00 1red 2 NO + 2 NC 52PX8A2B 52PX8B2B 72.00 52PX9 2B 96.00green 2 NO + 2 NC 52PX8A3B 52PX8B3B 72.00 52PX9 3B 96.00yellow 2 NO + 2 NC 52PX8A4B 52PX8B4B 72.00 52PX9 4B 96.00blue 2 NO + 2 NC 52PX8A5B 52PX8B5B 72.00 52PX9 5B 96.00 1gray 2 NO + 2 NC 52PX8A6B 52PX8B6B 72.00 52PX9 6B 96.00orange 2 NO + 2 NC 52PX8A8B 52PX8B8B 72.00 52PX9 8B 96.00DE1) For other contact block assemblies replace the 8th digit of the catalognumber as follows:C = 3 NO + 3 NCD = 4 NO + 4 NCE = 1 NC (EB)H = 1 NO (EM)Pilot DevicesDiscount Schedule PILOSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-201

Pushbutton Units and Indicator Lights30 mm, Black Max Corrosion Resistant, Class 52 Push Pull Operators Complete UnitsSelection and ordering dataVersion Color of actuator ContactblocksOrder no.ListPriceOrder no.ListPricePack2 position push-pull2 Position Push Pull Maintained,Non IlluminatedSmall Plastic Mushroom Head,1 5/8" (41.3 mm)$ $ Unitblack 1 NC + 1 NO 52PX2W1A 88.00 1red 1 NC + 1 NO 52PX2W2A 88.00green 1 NC + 1 NO 52PX2W3A 88.00Large Plastic Mushroom Head,2 1/2" (63.5 mm)black 1 NC + 1 NO 52PX2V1A 106.00 1red 1 NC + 1 NO 52PX2V2A 106.00green 1 NC + 1 NO 52PX2V3A 106.003 position push pull3 Position Push Pull Momentary,Non-Illuminated, spring return tocenter-pull to start, push tostop 1 )Small Plastic Mushroom Head,1 5/8" (41.3 mm)Large Plastic Mushroom Head,2 1/2" (63.5 mm)black 1 NC + 1 NO 52PX3W1U 96.00 1red 1 NC + 1 NO 52PX3W2U 96.00green 1 NC + 1 NO 52PX3W3U 96.00black 1 NC + 1 NO 52PX3V1U 104.00 1red 1 NC + 1 NO 52PX3V2U 104.00green 1 NC + 1 NO 52PX3V3U 104.0016CONTROLPRODUCTS2 position push pullilluminated2 Position Push Pull Maintained,Illuminated24V Full Voltage with 757 typearge Plastic Mushroom Head, or24V LED,1 3/4" (44.5 mm)120V transformer with 6V 755 typelamp, or 6V LED1 3/4" (44.5 mm)Operatorswith incandescentlampOperatorswith LEDlamp 2 )less operating head 1 NC + 1 NO 52PX2DNA 137.00 ***** ––––– 1chrome red 1 NC + 1 NO 52PX2D2A 137.00 52PX2D2AY 151.00chrome green 1 NC + 1 NO 52PX2D3A 137.00 52PX2D3AY 151.00chrome amber 1 NC + 1 NO 52PX2D9A 137.00 52PX2D9AY 151.00full red 1 NC + 1 NO 52PX2DRA 137.00 52PX2DRAY 151.00 1full green 1 NC + 1 NO 52PX2DSA 137.00 52PX2DSAY 151.00full amber 1 NC + 1 NO 52PX2DTA 173.00 52PX2DTAY 151.00less operating head 1 NC + 1 NO 52PX2GNA 137.00 ***** ––––– 1chrome red 1 NC + 1 NO 52PX2G2A 137.00 52PX2G2AY 151.00chrome green 1 NC + 1 NO 52PX2G3A 137.00 52PX2G3AY 151.00chrome amber 1 NC + 1 NO 52PX2G9A 137.00 52PX2G9AY 151.00240V transformer with 6V 755 typelamp, or 6V LED1 3/4" (44.5 mm)480V transformer with 6V 755 typelamp, or 6V LED1 3/4" (44.5 mm)600V transformer with 6V 755 typelamp, or 6V LED1 3/4" (44.5 mm)full red 1 NC + 1 NO 52PX2GRA 137.00 52PX2GRAY 151.00 1full green 1 NC + 1 NO 52PX2GSA 137.00 52PX2GSAY 151.00full amber 1 NC + 1 NO 52PX2GTA 137.00 52PX2GTAY 151.00less operating head 1 NC + 1 NO 52PX2HNA 119.00 ***** –––––chrome red 1 NC + 1 NO 52PX2H2A 137.00 52PX2H2AY 151.00 1chrome green 1 NC + 1 NO 52PX2H3A 137.00 52PX2H3AY 151.00chrome amber 1 NC + 1 NO 52PX2H9A 137.00 52PX2H9AY 151.00less operating head 1 NC + 1 NO 52PX2JNA 119.00 ***** ––––– 1chrome red 1 NC + 1 NO 52PX2J2A 137.00 52PX2J2AY 151.00chrome green 1 NC + 1 NO 52PX2J3A 137.00 52PX2J3AY 151.00chrome amber 1 NC + 1 NO 52PX2J9A 137.00 52PX2J9AY 151.00less operating head 1 NC + 1 NO 52PX2KNA 119.00 ***** ––––– 1chrome red 1 NC + 1 NO 52PX2K2A 137.00 52PX2K2AY 151.00chrome green 1 NC + 1 NO 52PX2K3A 137.00 52PX2K3AY 151.00chrome amber 1 NC + 1 NO 52PX2K9A 137.00 52PX2K9AY 151.00Pilot Devices1) Blocks cannot be interchanged (start-stop circuit).2) LED color must match lens color.16-202Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PILO

Pushbutton Units and Indicator Lights30 mm, Black Max Corrosion Resistant, Class 52 Push Pull OperatorsSelection and ordering dataVersion Color of actuator** Contacts Order #Operators withincandescentlamp3 Position Push Pull Momentary,Illuminated, spring return tocenter 1 )ListPrice$Order #Operators withLED lamp 2 )ListPrice$PackUnit3 position push pullilluminated24V Full Voltage with 757 type, or24V LED1 3/4" (44.5 mm)less operating head 1NC + 1NO 52PX3DNU 119.00 ***** ––––– 1chrome red 1NC + 1NO 52PX3D2U 137.00 52PX3D2UY 151.00chrome green 1NC + 1NO 52PX3D3U 137.00 52PX3D3UY 151.00chrome amber 1NC + 1NO 52PX3D9U 137.00 52PX3D9UY 151.00full red 1NC + 1NO 52PX3DRU 119.00 52PX3DRUY 151.00full green 1NC + 1NO 52PX3DSU 119.00 52PX3DSUY 151.00 1full amber 1NC + 1NO 52PX3DTU 119.00 52PX3DTUY 151.00120V transformer with 6V 755 typelamp, or 6V LED1 3/4" (44.5 mm)less operating head 1NC + 1NO 52PX3GNU 119.00 ***** ––––– 1chrome red 1NC + 1NO 52PX3G2U 137.00 52PX3G2UY 151.00chrome green 1NC + 1NO 52PX3G3U 137.00 52PX3G3UY 151.00chrome amber 1NC + 1NO 52PX3G9U 137.00 52PX3G9UY 151.00full red 1NC + 1NO 52PX3GRU 119.00 52PX3GRUY 151.00full green 1NC + 1NO 52PX3GSU 119.00 52PX3GSUY 151.00 1full amber 1NC + 1NO 52PX3GTU 119.00 52PX3GTUY 151.00240V transformer with 6V 755 type less operating head 1NC + 1NO 52PX3HNU 119.00 ***** –––––lamp, or 6V LEDchrome red 1NC + 1NO 52PX3H2U 137.00 52PX3H2UY 151.00 11 3/4" (44.5 mm) chrome green 1NC + 1NO 52PX3H3U 137.00 52PX3H3UY 151.00chrome amber 1NC + 1NO 52PX3H9U 137.00 52PX3H9UY 151.00480V transformer with 6V 755 type less operating head 1 NC + 1 NO 52PX3JNU 119.00 ***** ––––– 1lamp, or 6V LEDchrome red 1 NC + 1 NO 52PX3J2U 137.00 52PX3J2UY 151.001 3/4" (44.5 mm) chrome green 1 NC + 1 NO 52PX3J3U 137.00 52PX3J3UY 151.00chrome amber 1 NC + 1 NO 52PX3J9U 137.00 52PX3J9UY 151.00600V transformer with 6V 755 type less operating head 1 NC + 1 NO 52PX3KNU 119.00 ***** ––––– 1lamp, or 6V LEDchrome red 1 NC + 1 NO 52PX3K2U 137.00 52PX3K2UY 151.001 3/4" (44.5 mm) chrome green 1 NC + 1 NO 52PX3K3U 137.00 52PX3K3UY 151.00chrome amber 1 NC + 1 NO 52PX3K9U 137.00 52PX3K9UY 151.0016 CONTROLPRODUCTS1) Blocks cannot be interchanged (start-stop circuit).2) LED color must match lens color.Pilot DevicesDiscount Schedule PILOSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-203

Pushbutton Units and Indicator Lights30 mm, Black Max Corrosion Resistant, Class 52 Selector Switch Complete UnitsSelection and ordering dataVersion Lever type ContactblocksCam 1 ) Order no. ListPricePackShort lever assembledselector switchLong lever assembledselector switch$ unitSelector Switches with 2 switching positionsMaintained operation Short lever, non-Illuminated 1 NO A 52SX2AABK1 42.50 1Short lever, non-Illuminated 1 NC A 52SX2AABJ1 42.50Short lever, non-Illuminated 1 NO + 1 NC A 52SX2AABA1 55.00Long lever, non-Illuminated 1 NO A 52SW2AABK1 42.50 1Long lever, non-Illuminated 1 NC A 52SW2AABJ1 42.50Long lever, non-Illuminated 1 NO + 1NC A 52SW2AABA1 55.00Spring return from right operation Short lever, non-Illuminated 1 NO A 52SX2ACBK1 59.00 1Short lever, non-Illuminated 1 NC A 52SX2ACBJ1 59.00Short lever, non-Illuminated 1 NO + 1 NC A 52SX2ACBA1 72.00Long lever, non-Illuminated 1 NO A 52SW2ACBK1 59.00 1Long lever, non-Illuminated 1 NC A 52SW2ACBJ1 59.00Long lever, non-Illuminated 1 NO + 1NC A 52SW2ACBA1 72.00Selector Switches with 3 switching positionsMaintained operation Short lever, non-Illuminated 1 NO + 1 NC C 52SX2CABA1 55.00 1Short lever, non-Illuminated 2 NC + 1 NO G 52SX2GABJ2K1 67.00Short lever, non-Illuminated 2 NO + 2 NC C 52SX2CABA2 80.00Long lever, non-Illuminated 1 NO + 1 NC C 52SW2CABA1 55.00 1Long lever, non-Illuminated 2 NC + 1 NO G 52SW2GABJ2K1 67.00Long lever, non-Illuminated 2 NO + 2 NC C 52SW2CABA2 80.00Spring return from right Short lever, non-Illuminated 1 NO + 1 NC C 52SX2CCBA1 72.00 1Short lever, non-Illuminated 2 NC + 1 NO G 52SX2GCBJ2K1 84.00Short lever, non-Illuminated 2 NO + 2 NC C 52SX2CCBA2 96.0016CONTROLPRODUCTSLong lever, non-Illuminated 1 NO + 1 NC C 52SW2CCBA1 72.00 1Long lever, non-Illuminated 2 NC + 1 NO G 52SW2GCBJ2K1 84.00Long lever, non-Illuminated 2 NO + 2 NC C 52SW2CCBA2 96.00Spring return from right & left operation Short lever, non-Illuminated 1 NO + 1 NC C 52SX2CDBA1 72.00 1Short lever, non-Illuminated 2 NC + 1 NO G 52SX2GDBJ2K1 84.00Short lever, non-Illuminated 2 NO + 2 NC C 52SX2CDBA2 96.00Long lever, non-Illuminated 1 NO + 1 NC C 52SW2CDBA1 72.00 1Long lever, non-Illuminated 2 NC + 1 NO G 52SW2GDBJ2K1 84.00Long lever, non-Illuminated 2 NO + 2 NC C 52SW2CDBA2 96.00Spring return from left Short lever, non-Illuminated 1 NO + 1 NC C 52SX2CBBA1 72.00 1Short lever, non-Illuminated 2 NC + 1 NO G 52SX2GBBJ2K1 84.00Short lever, non-Illuminated 2 NO + 2 NC C 52SX2CBBA2 96.00Long lever, non-Illuminated 1 NO + 1 NC C 52SW2CBBA1 72.00 1Long lever, non-Illuminated 2 NC + 1 NO G 52SW2GBBJ2K1 84.00Long lever, non-Illuminated 2 NO + 2 NC C 52SW2CBBA2 96.00Pilot Devices1) For contact operation, see cam selection table on page 16-209.16-204Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PILO

Pushbutton Units and Indicator Lights30 mm, Black Max Corrosion Resistant, Class 52 Indicator Light OperatorsSelection and ordering dataIndicator lightVersion Color of actuator Order no. ListPriceOperatorswith Incandescentlamp $Indicator light with plastic lens -Full voltage type AC/DC 1 ) 2 )Order no.List Price PackOperatorswith LEDlamp 3 ) $ Unit6-8Vwith 755 type, or 6V LEDred52PX4B2 72.00 52PX4B2Y 86.00 1green 52PX4B3 72.00 52PX4B3Y 86.00amber 52PX4B9 72.00 52PX4B9Y 86.00less lens 52PX4BN 66.00 **** –––––12Vwith 756 typered52PX4C2 72.00 1green 52PX4C3 72.00amber 52PX4C9 72.00less lens 52PX4CN 66.0024V with 757 type, or 24V LED red 52PX4D2 72.00 52PX4D2Y 86.00 1green 52PX4D3 72.00 52PX4D3Y 86.00amber 52PX4D9 72.00 52PX4D9Y 86.00less lens 52PX4DN 66.00 **** –––––120V with 120MBtype, or 120V LED red 52PY4E2 72.00 52PX4E2Y 86.00 1green 52PY4E3 72.00 52PX4E3Y 86.00amber 52PY4E9 72.00 52PX4E9Y 86.00less lens 52PY4EN 66.00 **** –––––Indicator light with plastic lens -Transformer type AC/DC 1 ) 2 )120V with 6V 755 type lamp, or 6V LED red 52PX4G2 88.00 52PX4G2Y 102.00 1green 52PX4G3 88.00 52PX4G3Y 102.00amber 52PX4G9 88.00 52PX4G9Y 102.00less lens 52PX4GN 82.00 **** –––––240V with 6V 755 type lamp, or 6V LED red 52PX4H2 88.00 52PX4H2Y 102.00 1green 52PX4H3 88.00 52PX4H3Y 102.00amber 52PX4H9 88.00 52PX4H9Y 102.00less lens 52PX4HN 82.00 **** –––––277V with 6V 755 type lamp, or 6V LED red 52PX4T2 88.00 52PX4J2Y 102.00 1green 52PX4T3 88.00 52PX4J3Y 102.00amber 52PX4T9 88.00 52PX4J9Y 102.00less lens 52PX4TN 82.00 **** –––––480V with 6V 755 type lamp, or 6V LED red 52PX4J2 88.00 52PX4K2Y 102.00 1green 52PX4J3 88.00 52PX4K3Y 102.00amber 52PX4J9 88.00 52PX4K9Y 102.00less lens 52PX4JN 82.00 **** –––––600V with 6V 755 type lamp, or 6V LED red 52PX4K2 88.00 52PX4T2Y 102.00 1green 52PX4K3 88.00 52PX4T3Y 102.00amber 52PX4K9 88.00 52PX4T9Y 102.00less lens 52PX4KN 82.00 **** –––––16 CONTROLPRODUCTSIndicator light with plastic lens -Resistor type AC/DC *240V with 120V 2.5W 120MB type lamp,or 120VLEDred 52PY4N2 72.00 52PX4N2Y 86.00 1green 52PY4N3 72.00 52PX4N3Y 86.00amber 52PY4N9 72.00 52PX4N9Y 86.00less lens 52PY4NN 66.00 **** –––––Color code tableblueclearwhite5AB5ABPilot Devices1) All illuminated devices come with std. Touch-safe shield per UL stds.2) For factory installed glass lens, replace the 5th character with "5".3) LED color must match lens color. Consult Factory for Neon types.Discount Schedule PILOSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-205

Pushbutton Units and Indicator Lights30 mm, Black Max Corrosion Resistant, Class 52 Push to Test UnitsSelection and ordering dataPush to test/illuminatedpushbuttonVersionColor ofactuatorContactblocksOrder no.Operatorswith Incandescentlamp 3 )ListPrice$Order no.ListPricePackOperatorswith LEDlamp 2 ) 3 ) $ UnitIlluminated pushbutton/Push to testindicator plastic lens - Full indicatorlight with plastic lens - Full voltage typeAC/DC 1 )6-8V with 755 type, or 6V LED red 1 NO + 1 NC 52PX6B2A 96.00 52PX6B2AY 110.00 1green 1 NO + 1 NC 52PX6B3A 96.00 52PX6B3AY 110.00amber 1 NO + 1 NC 52PX6B9A 96.00 52PX6B9AY 110.00less lens 1 NO + 1 NC 52PX6BNA 91.00 **** –––––24V with 757 type, or 24V LED red 1 NO + 1 NC 52PX6D2A 96.00 52PX6D2AY 110.00 1green 1 NO + 1 NC 52PX6D3A 96.00 52PX6D3AY 110.00amber 1 NO + 1 NC 52PX6D9A 96.00 52PX6D9AY 110.00less lens 1 NO + 1 NC 52PX6DNA 91.00 ***** –––––16CONTROLPRODUCTSIlluminated pushbutton/Push to testplastic lens indicator light with plasticlens - Transformer type AC/DC 1 )120V with 6V 755 type lamp, or 6V LED red 1 NC + 1 NO 52PX6G2A 112.00 52PX6G2AY 126.00 1green 1 NC + 1 NO 52PX6G3A 112.00 52PX6G3AY 126.00amber 1 NC + 1 NO 52PX6G9A 112.00 52PX6G9AY 126.00less lens 1 NC + 1 NO 52PX6GNA 107.00 ***** –––––240V with 6V 755 type lamp, or 6V LED red 1 NC + 1 NO 52PX6H2A 112.00 52PX6H2AY 126.00 1green 1 NC + 1 NO 52PX6H3A 112.00 52PX6H3AY 126.00amber 1 NC + 1 NO 52PX6H9A 112.00 52PX6H9AY 126.00less lens 1 NC + 1 NO 52PX6HNA 112.00 ***** –––––480V with 6V 755 type lamp, or 6V LED red 1 NC + 1 NO 52PX6J2A 112.00 52PX6J2AY 126.00 1green 1 NC + 1 NO 52PX6J3A 112.00 52PX6J3AY 126.00amber 1 NC + 1 NO 52PX6J9A 112.00 52PX6J9AY 126.00less lens 1 NC + 1 NO 52PX6JNA 107.00 ***** –––––600V with 6V 755 type lamp, or 6V LED red 1 NC + 1 NO 52PX6K2A 112.00 52PX6K2AY 126.00 1green 1 NC + 1 NO 52PX6K3A 112.00 52PX6K3AY 126.00amber 1 NC + 1 NO 52PX6K9A 112.00 52PX6K9AY 126.00less lens 1 NC + 1 NO 52PX6KNA 107.00 ***** –––––Illuminated pushbutton/Push to testindicator indicator light with plastic lens- Resistor type AC/DC120V with 24V 757 type lamp, or 24V LED red 1 NC + 1 NO 52PX6M2A 96.00 52PX6M2AY 110.00 1green 1 NC + 1 NO 52PX6M3A 96.00 52PX6M3AY 110.00amber 1 NC + 1 NO 52PX6M9A 96.00 52PX6M9AY 110.00less lens 1 NC + 1 NO 52PX6MNA 96.00 ***** –––––240V with 24V 757 type lamp, or 24V LED red 1 NC + 1 NO 52PX6N2A 96.00 52PX6N2AY 110.00 1green 1 NC + 1 NO 52PX6N3A 96.00 52PX6N3AY 110.00amber 1 NC + 1 NO 52PX6N9A 96.00 52PX6N9AY 110.00less lens 1 NC + 1 NO 52PX6NNA 91.00 **** –––––Color code tableblueclearwhite5AB5ABWiring DiagramsIlluminated push buttonPush to TestPilot Devices1) All illuminated devices come with std. Touch-safe shield per UL stds.2) LED color must match lens color. Consult Factory for Neon types.3) For factory installed lens guard add suffix "Y".16-206Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PILO

Pushbutton Units and Indicator Lights30 mm, Black Max Corrosion Resistant, Class 52 Push to Test UnitsSelection and ordering dataVersion Color of actuator Order no. ListPricePack$ UnitFlush pushbutton operator Pushbutton with flush cap black 52PX8A1 22.00 1red52PX8A2 22.00green 52PX8A3 22.00yellow 52PX8A4 22.00blue 52PX8A5 22.00gray 52PX8A6 22.00orange 52PX8A8 22.00less cap 52PX8 20.50kit - with all colors 52PX8AN 25.50Extended pushbutton operator Pushbutton with extended cap black 52PX8B1 22.00 1red 52PX8B2 22.00green 52PX8B3 22.00yellow 52PX8B4 22.00blue 52PX8B5 22.00gray 52PX8B6 22.00orange 52PX8B8 22.00less cap 52PX8 20.50kit - with all colors 52PX8BN 25.50Mushroom head pushbutton Pushbutton with mushroom cap black 52PX9D1 46.50 1operator1 5/8" (41.3mm)red52PX9D2 46.50green 52PX9D3 46.50yellow 52PX9D4 46.50blue 52PX9D5 46.50gray 52PX9D6 46.50orange 52PX9D8 46.50less cap 52PX9 38.50kit - with all colors 52PX9DN 49.00Pushbutton with mushroom cap black 52PX9E1 55.00 12 1/2" (63.5mm)red52PX9E2 55.00green 52PX9E3 55.00yellow 52PX9E4 55.0016 CONTROLPRODUCTSblue 52PX9E5 55.00gray 52PX9E6 55.00orange 52PX9E8 55.00less cap 52PX9 38.50kit - with all colors 52PX9EN 49.002 position push pull maintained, non illuminatedSmall Plastic Mushroom Head, 1 5/8" (41.3mm) black 52PX2W1 63.00 1red 52PX2W2 63.00green 52PX2W3 63.00Large Plastic Mushroom Head, 2 1/4" (57.2mm) black 52PX2V1 82.00 1red 52PX2V2 82.00green 52PX2V3 82.00Pilot DevicesDiscount Schedule PILOSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 16-207

Pushbutton Units and Indicator Lights30 mm, Black Max Corrosion Resistant, Class 52 Selector Switch OperatorsSelection and ordering dataVersion Lever type Color oflever insertCam 1 ) Order no.ListPricePack$ unitSelector Switches with 2 switching positionsMaintained operation Short lever, non-Illuminated white A 52SX2AAB 30.50 1Long lever, non-Illuminated white A 52SW2AAB 30.50Spring return from right operation Short lever, non-Illuminated white A 52SX2ACB 47.00 1Long lever, non-Illuminated white A 52SW2ACB 47.00Selector Switches with 3 switching positionsMaintained operation Short lever, non-Illuminated white B 52SX2BAB 30.50 1Long lever, non-Illuminated white B 52SW2BAB 30.50Short lever, non-Illuminated white C 2 ) 52SX2CAB 30.50Long lever, non-Illuminated white C 2 ) 52SW2CAB 30.50Short lever, non-Illuminated white D 52SX2DAB 30.50Long lever, non-Illuminated white D 52SW2DAB 30.50Short lever, non-Illuminated white E 52SX2EAB 30.50Long lever, non-Illuminated white E 52SW2EAB 30.50Short lever, non-Illuminated white G 52SX2GAB 30.50Long lever, non-Illuminated white G 52SW2GAB 30.50Spring return from right operation Short lever, non-Illuminated white B 52SX2BCB 47.00 1Long lever, non-Illuminated white B 52SW2BCB 47.00Short lever, non-Illuminated white C 2 ) 52SX2CCB 47.00Long lever, non-Illuminated white C 2 ) 52SW2CCB 47.00Short lever, non-Illuminated white D 52SX2DCB 47.00Long lever, non-Illuminated white D 52SW2DCB 47.00Short lever, non-Illuminated white E 52SX2ECB 47.00Long lever, non-Illuminated white E 52SW2ECB 47.00Short lever, non-Illuminated white G 52SX2GCB 47.00Long lever, non-Illuminated white G 52SW2GCB 47.00CONTROLPRODUCTS 16Spring return from left operation Short lever, non-Illuminated white B 52SX2BBB 47.00 1Long lever, non-Illuminated white B 52SW2BBB 47.00Short lever, non-Illuminated white C 2 ) 52SX2CBB 47.00Long lever, non-Illuminated white C 2 ) 52SW2CBB 47.00Short lever, non-Illuminated white D 52SX2DBB 47.00Long lever, non-Illuminated white D 52SW2DBB 47.00Short lever, non-Illuminated white E 52SX2EBB 47.00Long lever, non-Illuminated white E 52SW2EBB 47.00Short lever, non-Illuminated white G 52SX2GBB 47.00Long lever, non-Illuminated white G 52SW2GBB 47.00Spring return from left and right operation Short lever, non-Illuminated white B 52SX2BDB 47.00 1Long lever, non-Illuminated white B 52SW2BDB 47.00Short lever, non-Illuminated white C 2 ) 52SX2CDB 47.00Long lever, non-Illuminated white C 2 ) 52SW2CDB 47.00Short lever, non-Illuminated white D 52SX2DDB 47.00Long lever, non-Illuminated white D 52SW2DDB 47.00Short lever, non-Illuminated white E 52SX2EDB 47.00Long lever, non-Illuminated white E 52SW2EDB 47.00Short lever, non-Illuminated white G 52SX2GDB 47.00Long lever, non-Illuminated white G 52SW2GDB 47.00Selector Switches with 4 switching positionsMaintained operation Non-Illuminated, Short lever white H 52SX2HAB 30.50 1Non-Illuminated, Long lever white H 52SW2HAB 30.50Pilot Devices1) For contact operation, see cam selection tableon page 16/209.2) C- Cam is limited to 4 contact blocks, 1 or 2 pole,SR only.16-208 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PILO

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Cam SelectionSelection and ordering dataOrdering Information• Contact blocks are ordered separately, see page 16-213.• Under Selector Position find the selector operation required (2 or 3 position).• Select the contact operation required for each selector lever position (X indicates when contacts areclosed).• The cam letter column identifies the cam of the selector operator.• Contact block must be assembled in position shown for each circuit application.• Cam D, E or G may be ordered at the same price by changing the 6th character of the selector catalognumber. Example: Selector with D cam 51SA2DA.• C Cam on spring return selectors is limited to 4 contact blocks.• Selector operators in enclosures are limited to depth of 1 contact block. (2 blocks wide).Lever or key operators (viewed from front)CamletterContact blockcatalog no.Mounting(viewed from front)SelectorpositionLever position (X indicates contact closed)Left Right Left Right2 X OA 52BAJ (NC) L or RO X52BAK (NO) L or RIlluminatedX OA 52BAJ (NC) LO X52BAK (NO) LLeft Center Right Right3 X O O B 52BAK (NO) RO O X 52BAK (NO) LX X O 52BAJ (NC) LO X X 52BAJ (NC) RX O X 2 - 52BAK* (NO) L and RX O O C 52BAJ (NC) L or RO O X 52BAK (NO) L or RO X O D 52BAJ (NC) L or RO O X 52BAK (NO) L or RX O O E 52BAK (NO) L or RO X O 52BAJ (NC) L or RX O O G 52BAJ (NC) LO X O 52BAJ (NC) RO O X 52BAK (NO) L or RIlluminatedX O O C 52BAJ (NC) LO O X 52BAK (NO) LO X O B 52BAK (NO) RO O X 52BAJ (NC) RLeft Left center Right center Right4 X O O O H 52BAK (NO) RO X O O 52BAJ (NC) LO O X O 52BAJ (NC) RO O O X 52BAK (NO) LSelector pushbutton operatorsLeftN D NRightD2 X O O O Q 52BAK (NO) RX X O O 52BAJ (NC) LO X O X 52BAJ (NC) RO O O X 52BAK (NO) LX O O O P L or RO X X X L or RX X X O R LX O X X RO X O O RO O O X LLeftCenterRightN D N D N D3 X X O O O OLX O X X O O S RO X O O O XRO O O X O XLSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog16-209CONTROLPilot Devices16 PRODUCTS

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Custom Selector Switch DesignsSelection and ordering dataAssembled Non-illuminated Selector Switches• Determine contact block and location from above.• Select block suffix. Ex: J = 52BAJ.• Now select position suffix.• 1-52BAJ block mounted on right side, suffix will be J 1.• Additional suffixes allow for multiple quantities and locations.• Repeat process for next block if required.• Add list price of blocks to operator list price.• Consult factory for delivery.Example 1: X O O Block Suffix Position SuffixO O X Quantity and LocationHAND-OFF-AUTO Maintained Switch A = 1 NO - 1 NC, 52BJK Suffix Left RightCatalog No 52SA2CAB A 1 = 52A2CABA1 E = NC Late Break, 52BAE 0 1 —(52BJK block mounted on right side) H = NO Early Make, 52BAH 1 — 1J = NC, 52BAJ 2 1 1Example 2: X O O 52BAJ (L) K = NO, 52BAK 3 2 —O X O 52BAJ (R) }J24 — 2O O X 52BAK (L or R) } K1 5 2 1G Cam required 6 1 2Catalog No 52SA2GAB J2 K1 = 52SA2GABJ2K1 7 2 28 3 —9 — 3Pilot DevicesCONTROLPRODUCTS 1616-210 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Accessories and Spare PartsSelection and ordering dataVersionSuitable forLampvoltageColor Order no. ListPrice$Flush actuator button For flush type, black 52RA1A1 1.60non-illuminated pushbuttons red 52RA1A2 1.60green 52RA1A3 1.60yellow 52RA1A4 1.60blue 52RA1A5 1.60gray 52RA1A6 1.60orange 52RA1A8 1.60kit- all colors 52RA1AN 11.20Extended actuator button For extended type, black 52RA1B1 1.60non-illuminated pushbuttons red 52RA1B2 1.60green 52RA1B3 1.60yellow 52RA1B4 1.60blue 52RA1B5 1.60gray 52RA1B6 1.60orange 52RA1B8 1.601 of each color cap 52RA1BN 11.20Mushroom head - Plastic For small 1 5/8"(41.3mm) type, black 52RB3D1 8.20non-illuminated mushroom pushbuttons red 52RB3D2 8.20and push-pull; set screw green 52RB3D3 8.20yellow 52RB3D4 8.20blue 52RB3D5 8.20gray 52RB3D6 8.20orange 52RB3D8 8.201 of each color cap 52RB3DN 65.60Mushroom head - Metal For small 1 5/8"(41.3mm) type, chrome 52RB3FC 17.80non-illuminated push-pull; set screw red 52RB3F2 17.80green 52RB3F3 17.80Mushroom head - Plastic For large 2 1/2"(63.5mm) type, black 52RB3E1 16.40non-illuminated mushroom pushbuttons red 52RB3E2 16.40and push-pull; set screw green 52RB3E3 16.40yellow 52RB3E4 16.40blue 52RB3E5 16.40gray 52RB3E6 16.40orange 52RB3E8 16.401 kit of each color cap 52RB3EN 131.00Illuminated mushroom head For 1 3/4" illuminated mushroom head red 52RB3H2 18.00Illuminated metal pushbuttons; threaded green 52RB3H3 18.00amber 52RB3H9 18.00green 52RB3JG 18.00Illuminated plastic red 52RB3JR 18.00amber 52RB3JA 18.00Replacement Lens for Pilot Lights red 52RA4P2 5.80Plastic lens green 52RA4P3 5.80blue 52RA4P5 5.80amber 52RA4P9 5.80clear 52RA4PA 5.80white 52RA4PB 5.80Glass lens red 52RA4G2 22.50green 52RA4G3 22.50blue 52RA4G5 22.50amber 52RA4G9 22.50clear 52RA4GA 22.50white 52RA4GB 22.50Replacement Lens for Push to test/Illuminated pushbuttons red 52RA5P2 5.80Plastic lens green 52RA5P3 5.80blue 52RA5P5 5.80amber 52RA5P9 5.80clear 52RA5PA 5.80white 52RA5PB 5.80CONTROLPilot Devices16 PRODUCTSDiscount Schedule PILOSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog16-211

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Accessories and Spare PartsSelection and ordering dataVersionSuitable forLampvoltageColor Order no. ListPrice$Replacement lens kit for red 52RA6P2 5.80Illuminated selector switches green 52RA6P3 5.80Knob & Insert blue 52RA6P5 5.80amber 52RA6P9 5.80clear 52RA6PA 5.80white 52RA6PB 5.80Lever inserts red 52RA2A2 0.40Short lever green 52RA2A3 0.40blue 52RA2A5 0.40yellow 52RA2A4 0.40gray 52RA2A6 0.40orange 52RA2A8 0.40white 52RA2AB 0.40Long lever red 52RA2B2 0.40green 52RA2B3 0.40blue 52RA2B5 0.40yellow 52RA2B4 0.40gray 52RA2B6 0.40orange 52RA2B8 0.40white 52RA2BB 0.40Replacement lens for compact style pilot lights red 52RA7P2 5.80Replacement lenses green 52RA7P3 5.80blue 52RA7P5 5.80amber 52RA7P9 5.80clear 52RA7PA 5.80white 52RA7PB 5.80CONTROLPRODUCTS 16Clear protective boot Flush pushbutton operators 52AABA 16.40Offers protection from ice and foreignsubstances from interfering with buttonoperationPushbutton guard Non-Illuminated pushbuttons 52AAGP 8.20Prevents accidental operation of the Black Max styles, non-Illuminated pushbuttons52AXGP 8.20pushbuttonLens guard Push to test buttons and pilot lights 52AAGL 8.20Black Max styles, push to test buttonsand pilot lights52AXGL 8.20Guard for mushroom headAdditional hole spacing is required onadjacent devices1 5/8"(41.3mm) mushroom head pushbuttonand push-pull operatorsBlack Max styles,1 5/8"(41.3mm) mushroomhead pushbutton and push-pulloperators52AAGM 33.0052AXGM 33.00Pushbutton locknut Pushbutton and push-to-test device 52AANP 2.70Replacement front ring Black Max styles 52AXNP 2.70Pilot DevicesPush-pull/pilot light locknutMushroom head and pilot light indicators52AANL 2.70Replacement front ring Black Max styles52AXNL 2.70Selector switch locknut Selector switch 52AANS 2.70Replacement front ring Black Max styles, selector switch 52AXNS 2.70Padlock attachmentsFlush pushbutton operators52AALA 24.50Extended operators 1 )52AALB 24.50Padlock coverPushbuttons, selector switches, and nonilluminated52AALS 49.00Can be used to lock devices in the offposition mushroom headsPushbuttons, selector switches, and 52AALE 47.00illuminated mushroom headsLock nut wrench All devices 52MAWB 24.50Hole plugs Corrosion resistant 52AAH6 8.20Steel, gray 52ABH6 8.20Stainless steel 52ABHS 24.50Spare keys 501CH (1 key) D28671015 5.60Grounding kit All devices 52AL109145 4.20Touchsafe shield Illuminated devices (Current revisions only) 52AASH 2.40Black boot Extended or flush pushbuttons 52AAB1 16.40Rubber gasket (5) All devices 52AAD 2.40Yellow 90 mm ESTOP ring All E-Stops 52AAR 4.501) Must be used with step raised cap- 52PA8C2.16-212 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PILO

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Accessories and Spare PartsSelection and ordering dataVersion Suitable for LampvoltageColor Order no. ListPrice$Lamps with screw connection, miniature bayonet (BA 9s style)Incandescent lamps,Flashing, type 267 lamp (replaces 755 lamp) 51, 52 6 V AC 52AABNF 12.406V type 755 lamp51, 526 V AC52AABN 8.2012V type 75651, 5212 V AC52AACN 8.2024V type 75751, 52 24 V AC 52AADN 7.50120V, 2.5W, type #120MB52 120V AC 52AAENC1 8.20Neon (uses resistors) type B2A (NE-51H)52120 V AC52AAPN 16.9048V51, 5248 V3SB1902-1AP 12.50Candelabra, 120 V, Full voltage type 3S6/5 1 ) 52 older revision styles 120 V 52AAENC 8.207 WattsLED’s BA9s Stylelength 28 mmdiameter 10 mmcurrent 15 ma52 6 V UC red 52AEB2 22.5052 6 V UC green 52AEB3 22.5052 6 V UC yellow 52AEB4 22.5052 6 V UC white 52AEBB 22.5052 6 V UC blue 52AEB5 22.5052 24 V UC red 52AED2 22.5052 24 V UC green 52AED3 22.5052 24 V UC yellow 52AED4 22.5052 24 V UC white 52AEDB 22.5052 24 V UC blue 52AED5 22.5052 120 V AC red 52AEE2 22.5052 120 V AC green 52AEE3 22.5052 120 V AC yellow 52AEE4 22.5052 120 V AC white 52AEEB 22.5052 120 V AC blue 52AEE5 22.5052 BAJ52 BAK52 BARLED's,cluster type526 V UC red 52AEB27 28.00For use with Class 52 pilot lights only52 6 V UC green 52AEB37 28.00(7 LED’s)52 6 V UC yellow 52AEB47 28.00Touchsafe contact blocks with gold flashing52 24 V UC red 52AED27 28.0052 24 V UC green 52AED37 28.0052 24 V UC yellow 52AED47 28.0052 120 V AC red 52AEE27 28.0052 120 V AC green 52AEE37 28.0052 120 V AC yellow 52AEE47 28.00Plunger Color1 NO White 52BAK 12.401 NC Red 52BAJ 12.401 NO - 1 NC Black 52BJK 24.501 NO early make closes before 52BAK Green 52BAH 12.401 NC late break opens after 52 BAJ Yellow 52BAE 12.401 NO - 1 NC Reed switch ___ 52BAR 2) 49.50UL listed for class 1 division 2.25A Max, 200V AC, 10 Watt max.5A Max, 200V DC, 10 Watt max1 NC extra late break Blue 52BAU 12.401 NO Not touch safe 52BAKE 15.401 NC Not touch safe 52BAJE 15.401) Design change made in 2003 from candelabra toBA 9s type bulbs. Contact technical support forfurther information.2) Hermetically sealed.CONTROLPilot Devices16 PRODUCTSDiscount Schedule PILOSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog16-213

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Dimensional DrawingsDimension drawings, inch (mm)Contact blockNon-illuminated momentary pushbutton flush,extended, styles with one contact block1.00 (25)1.64 (42).03 (1)Contact Block.eps file missing1.05 (27)2.11 (54).39 (10).39 (10).39 (10)Large mushroomhead momentary pushbutton2 position maintainednon-illuminated2 position maintainedpush-pull illuminatedSmall mushroomhead momentary pushbutton3 position maintainednon-illuminated3 position maintainedpush-pull illuminatedPilot DevicesCONTROLPRODUCTS 1616-214 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Dimensional DrawingsDimension drawings, inch (mm)Pilot lightfull voltage and transformerPush to test illuminated pushbuttonSelector switches and keyed selector switchesilluminated and non-illuminatedSelectorpush operator2 button maintained operator Maintained toggle operatorCONTROLPilot Devices16 PRODUCTSSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog16-215

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Class 52 Oiltight Pushbutton StationSelection and ordering dataCONTROLPRODUCTS 16Pilot Devices1 unit controlstation2 unit controlstationActuator identificationC = top device in stationB = middle device in stationA = bottom device in stationDegree of protection Contact / voltage No. of Order no.commandpoints$ UnitA = Momentary flush pushbutton black, label "START" NEMA 12 1NO - 1NC 1 52C101A 131.00A = Momentary raised pushbutton red, label "STOP" NEMA 12 1NO - 1NC 1 52C103A 131.00A = Momentary mushroom head red, label "STOP" NEMA 12 1NO - 1NC 1 52C104A 155.00A = Maintained metal mushroom head red, label NEMA 12 1NO - 1NC 1 52C117A 183.00"EMERGENCY STOP"A = 2 position selector switch "OFF-ON" NEMA 12 1NO - 1NC 1 52C159A 140.00A = 3 position selector switch "HAND-OFF-AUTO" NEMA 12 1NO - 1NC 1 52C156A 140.00A = Indicator light, redNEMA 12120V TransformertypeListPrice1 52C131A 155.00A = Indicator light, greenNEMA 12120V Transformer 1 52C135A 155.00typeA = Momentary flush pushbutton black, label "START" NEMA 4X Stainless Steel 1NO - 1NC 1 52C101S 209.00A = Momentary raised pushbutton red, label "STOP" NEMA 4X Stainless Steel 1NO - 1NC 1 52C103S 209.00A = Momentary mushroom head red, label "STOP" NEMA 4X Stainless Steel 1NO - 1NC 1 52C104S 233.00A = Maintained metal mushroom head red, label NEMA 4X Stainless Steel 1NO - 1NC 1 52C116S 249.00"EMERGENCY STOP" (metal head)A = 2 position selector switch "OFF-ON" NEMA 4X Stainless Steel 1NO - 1NC 1 52C159S 216.00A = 3 position selector switch "HAND-OFF-AUTO" NEMA 4X Stainless Steel 1NO - 1NC 1 52C156S 216.00A = Momentary flush pushbutton black, label "START" NEMA 4X Fiberglass 1NO - 1NC 1 52C101X 159.00A = Momentary raised pushbutton red, label "STOP" NEMA 4X Fiberglass 1NO - 1NC 1 52C103X 159.00A = Momentary mushroom head red, label "STOP" NEMA 4X Fiberglass 1NO - 1NC 1 52C104X 183.00A = Maintained metal mushroom head red, label NEMA 4X Fiberglass 1NO - 1NC 1 52C116X 199.00"EMERGENCY STOP" (metal head)A = 2 position selector switch "OFF-ON" NEMA 4X Fiberglass 1NO - 1NC 1 52C159X 166.00A = 3 position selector switch "HAND-OFF-AUTO" NEMA 4X Fiberglass 1NO - 1NC 1 52C156X 166.00B = Momentary flush pushbutton black, label "START"A = Momentary raised pushbutton red, label "STOP"B = Momentary flush pushbutton green, label "START"A = Momentary Mushroom head pushbutton red,label "STOP"B = Momentary flush pushbutton, label "FORWARD"A = Momentary flush pushbutton, label "REVERSE"B = Momentary flush pushbutton, label "UP"A = Momentary flush pushbutton, label "DOWN"B = Indicator light, red, label "RUN"A = Maintained selector switch, label"HAND-OFF-AUTO"B = Indicator light, redA = Indicator light, greenB = Momentary flush pushbutton black, label "START"A = Momentary raised pushbutton red, label "STOP"B = Momentary flush pushbutton green, label "START"A = Momentary Mushroom head pushbutton red, label"STOP"NEMA 12NEMA 12NEMA 12NEMA 12NEMA 12NEMA 12NEMA 4X Stainless SteelNEMA 4X Stainless SteelB = Momentary flush pushbutton, label "UP"NEMA 4X Stainless SteelA = Momentary flush pushbutton, label "DOWN"B = Indicator light, red, label "RUN"NEMA 4X Stainless SteelA = Maintained selector switch, label "HAND-OFF-AUTO"B = Momentary flush pushbutton black, label "START"A = Momentary raised pushbutton red, label "STOP"B = Momentary flush pushbutton green, label "START"A = Momentary Mushroom head pushbutton red, label"STOP"NEMA 4X FiberglassNEMA 4X FiberglassB = Momentary flush pushbutton, label "UP"NEMA 4X FiberglassA = Momentary flush pushbutton, label "DOWN"B = Indicator light, red, label "RUN"NEMA 4X FiberglassA = Maintained selector switch, label "HAND-OFF-AUTO"1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC120V Transformertype120V Transformertype1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC120V Transformertype1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC120V Transformertype1NO, 1NC2 52C201A 189.002 52C202A 213.002 52C204A 189.002 52C223A 200.002 52C224A 249.002 52C230A 255.002 52C201S 265.002 52C202S 290.002 52C223S 265.002 52C224S 314.002 52C201X 225.002 52C202X 249.002 52C223X 225.002 52C224X 274.00Pack16-216 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PILO

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Class 52 Oiltight Pushbutton StationSelection and ordering dataActuator identification Degree of protection Contact / voltage No. of Order no.commandpointsListPricePack$ Unit3 unit controlstationC = Indicator light, redB = Momentary flush pushbutton black, label "START"A = Momentary raised pushbutton red, label "STOP"C = Momentary flush pushbutton black, label "FORWARD"B = Momentary flush pushbutton black, label "REVERSE"A = Momentary raised pushbutton red, label "STOP"C = Momentary flush pushbutton black, label "UP"B = Momentary flush pushbutton black, label "DOWN"A = Momentary raised pushbutton red, label "STOP"C = Momentary flush pushbutton black, label "OPEN"B = Momentary flush pushbutton black, label "STOP"A = Momentary raised pushbutton red, label "CLOSE"C = Momentary flush pushbutton black, label "HI"B = Momentary flush pushbutton, black label "LOW"A = Momentary raised pushbutton red, label "STOP"C = Indicator light, redB = Momentary flush pushbutton black, label "START"A = Momentary raised pushbutton red, label "STOP"C = Momentary flush pushbutton black, label "FORWARD"B = Momentary flush pushbutton black, label "REVERSE"A = Momentary raised pushbutton red, label "STOP"C = Momentary flush pushbutton black, label "UP"B = Momentary flush pushbutton black, label "DOWN"A = Momentary raised pushbutton red, label "STOP"C = Momentary flush pushbutton black, label "OPEN"B = Momentary flush pushbutton black, label "STOP"A = Momentary raised pushbutton red, label "CLOSE"C = Momentary flush pushbutton black, label "HI"B = Momentary flush pushbutton, black label "LOW"A = Momentary raised pushbutton red, label "STOP"C = Indicator light, redB = Momentary flush pushbutton black, label "START"A = Momentary raised pushbutton red, label "STOP"C = Momentary flush pushbutton black, label "FORWARD"B = Momentary flush pushbutton black, label "REVERSE"A = Momentary raised pushbutton red, label "STOP"C = Momentary flush pushbutton black, label "UP"B = Momentary flush pushbutton black, label "DOWN"A = Momentary raised pushbutton red, label "STOP"C = Momentary flush pushbutton black, label "OPEN"B = Momentary flush pushbutton black, label "STOP"A = Momentary raised pushbutton red, label "CLOSE"C = Momentary flush pushbutton black, label "HI"B = Momentary flush pushbutton, black label "LOW"A = Momentary raised pushbutton red, label "STOP"NEMA 12NEMA 12NEMA 12NEMA 12NEMA 12NEMA 4X Stainless SteelNEMA 4X Stainless SteelNEMA 4X Stainless SteelNEMA 4X Stainless SteelNEMA 4X Stainless SteelNEMA 4X FiberglassNEMA 4X FiberglassNEMA 4X FiberglassNEMA 4X FiberglassNEMA 4X Fiberglass120V1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC120V1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC120V1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC1NO, 1NC3 52C307A 279.003 52C301A 255.003 52C332A 265.003 52C333A 265.003 52C334A 265.003 52C307S 413.003 52C301S 372.003 52C332S 372.003 52C333S 372.003 52C334S 372.003 52C307X 331.003 52C301X 290.003 52C332X 290.003 52C333X 290.003 52C334X 290.00CONTROLPilot Devices16 PRODUCTSDiscount Schedule PILOSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog16-217

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Empty EnclosuresSelection and ordering dataVersionNumber of Degree ofOrder No.List PackcommandpointsprotectionPrice$ UnitStandard enclosures come with 2 1/4" leg 1 NEMA Type 12/13 P30EMS01 82.00center for legend spacing. Automotive 1 NEMA Type 12/13 extra deep P30EMS01D 82.00end plates require 2 1/2 " spacing. For 1 NEMA Type 4/4X stainless steel P30EMS014 148.00more than 2 contact blocks on the right or 1 NEMA Type 4/4X Fiberglass P30EMS01X 98.00left, use extra deep enclosure. 2 NEMA Type 12/13 P30EMS02 91.002 NEMA Type 12/13 extra deep P30EMS02D 102.00Mounting hole arrangement 2 NEMA Type 4/4X stainless steel P30EMS024 155.002 NEMA Type 4/4X Fiberglass P30EMS02X 115.001 thu 4 are in one row3NEMA Type 12/13P30EMS03 107.006 holes are 3 down and 2 across 3 NEMA Type 12/13 extra deep P30EMS03D 102.009 holes are 3 down and 3 across 3 NEMA Type 4/4X stainless steel P30EMS034 213.0012 holes are 4 down and 3 across 3 NEMA Type 4/4X Fiberglass P30EMS03X 131.0016 holes are 4 down and 4 across 4 NEMA Type 12/13 P30EMS04 131.004 NEMA Type 12/13 extra deep P30EMS04D 149.004 NEMA Type 4/4X stainless steel P30EMS044 279.004 NEMA Type 4/4X Fiberglass P30EMS04X 153.006 NEMA Type 12/13 P30EMS06 165.006 NEMA Type 12/13 extra deep P30EMS06D 189.006 NEMA Type 4/4X stainless steel P30EMS064 410.009 NEMA Type 12/13 P30EMS09 215.009 NEMA Type 12/13 extra deep P30EMS09D 243.009 NEMA Type 4/4X stainless steel P30EMS094 509.0012 NEMA Type 12/13 P30EMS12 289.0012 NEMA Type 12/13 extra deep P30EMS12D 328.0012 NEMA Type 4/4X stainless steel P30EMS124 616.0016 NEMA Type 12/13 P30EMS16 371.0016 NEMA Type 12/13 extra deep P30EMS16D 421.0016 NEMA Type 4/4X stainless steel P30EMS164 812.00Order FormCONTROLPRODUCTS 161234ALocationB C DEnclosure Hole ArrangementOrdering InformationTo order non-standard control stations select catalog numbersfrom the previous pages, determine the required position in theenclosure and fill in the table below. If a special legend plate isrequired, specify description in the table. The combined listprices of the components is the list price of the station.• Select enclosure• Vertical or Horizontal. Outline Diagram at left starting at thetop left-hand corner. Example: 3 unit vertical outline locationNo. 1A, 2A and 3A. 3 unit horizontal outline location No. 1A,1B, and 1C• List location No. and applicable catalog numbers in the tablebelow. Use complete catalog numbers where possibleOperatorPB-SEL.-PLAccessoriesKey Lock, Boot, Etc,Legend PlateLegend or BlankOrder No./Item No.CustomerEnclosure Catalog No.Special MarkingPilot Devices16-218 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product CatalogDiscount Schedule PILO

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Legend Plates for Class 51 & 52DesignThe 30 mm legend plates are approved for the use with both Class 51 and Class 52 devices. Automotive legend plates require 2 1/2" mountingcenters. Plastic legend plates will have white letters ingraved.When ordering custom engraved legend plates, specify the required inscription text. See page 16-218.Selection and ordering data1 1/41 5/8222 7/16InscriptionLarge List Automotive 1 ) List Large Plastic 2 ) List Automotive Plastic 1 ) 2 ) List(1 7/16" x 2")Order No.Price$(2 7/16" x 2 7/16")Order No.Price$(1 7/16" x 2")Order No.Price$(2 7/16" x 2 7/16")Order No.Price$"Blank (brushed aluminum)" 52NL02 2.40 52NA024.20 —–––– —––––"Blank (red)" 52NL02R 2.40 52NA02R 4.20 52ND02R 2.40 52NE02R 4.20"Blank (Black)" 52NL02B 2.40 52NA02B 4.20 52ND02B 2.40 52NE02B 4.20Inscribed legend plates with large brushed aluminum backgroundClose 52NL18 2.40 52NA184.20 —–––– —––––Down 52NL10 2.40 52NA104.20 —–––– —––––Emerg Stop 52NL16 2.40 52NA164.20 —–––– —––––Emerg Stop (red) 52NL16R 2.40 52NA16R4.20 —–––– —––––Fast-Slow 52NL33 2.40 52NA334.20 —–––– —––––Forward 52NL05 2.40 52NA054.20 —–––– —––––For-Off-Rev 52NL38 2.40 52NA384.20 —–––– —––––For-Rev 52NL31 2.40 52NA314.20 —–––– —––––Hand-Off-Auto 52NL37 2.40 52NA374.20 —–––– —––––High 52NL07 2.40 52NA074.20 —–––– —––––High-Low 52NL30 2.40 52NA304.20 —–––– —––––High-Off-Low 52NL44 2.40 52NA444.20 —–––– —––––In 52NL21 2.40 52NA214.20 —–––– —––––Jog 52NL13 2.40 52NA134.20 —–––– —––––Jog-Forward 52NL24 2.40 52NA244.20 —–––– —––––Jog-Reverse 52NL25 2.40 52NA254.20 —–––– —––––Low 52NL08 2.40 52NA084.20 —–––– —––––Lower 52NL20 2.40 52NA204.20 —–––– —––––Man-Auto 52NL35 2.40 52NA354.20 —–––– —––––Off 52NL12 2.40 52NA124.20 —–––– —––––Off-On 52NL26 2.40 52NA264.20 —–––– —––––On 52NL11 2.40 52NA114.20 —–––– —––––On-Off-Auto 52NL40 2.40 52NA404.20 —–––– —––––Open 52NL17 2.40 52NA174.20 —–––– —––––Open-Close 52NL34 2.40 52NA344.20 —–––– —––––Out 52NL22 2.40 52NA224.20 —–––– —––––Pull to Start and Push to Stop 52NL47 2.40 52NA474.20 —–––– —––––Raise 52NL19 2.40 52NA194.20 —–––– —––––Raise-Lower 52NL36 2.40 52NA364.20 —–––– —––––Reset 52NL14 2.40 52NA144.20 —–––– —––––Reverse 52NL06 2.40 52NA064.20 —–––– —––––Run 52NL23 2.40 52NA234.20 —–––– —––––Run-Jog 52NL29 2.40 52NA294.20 —–––– —––––Safe-Run 52NL27 2.40 52NA274.20 —–––– —––––Slow-Off-Fast 52NL39 2.40 52NA394.20 —–––– —––––Start 52NL03 2.40 52NA034.20 —–––– —––––Start-Jog 52NL28 2.40 52NA284.20 —–––– —––––Start-Stop 52NL32 2.40 52NA324.20 —–––– —––––Stop 52NL04 2.40 52NA044.20 —–––– —––––Stop (red) 52NL04R 2.40 52NA04R4.20 —–––– —––––Up 52NL09 2.40 52NA094.20 —–––– —––––Up-Down 52NL49 2.40 52NA494.20 —–––– —––––Up-Off-Down 52NL42 2.40 52NA424.20 —–––– —––––Open-Off-Close 52NL41 2.40 52NA414.20 —–––– —––––Inscription plates with custom engraving"Custom engraved52NL02E 10.70 52NA02E 12.40 —–––– —––––(brushed aluminum)""Custom engraved (red)" 52NL02RE 10.70 52NA02RE 12.40 52ND02RE 10.70 52NE02RE 12.40"Custom engraved (Black)" 52NL02BE 10.70 52NA02BE 12.40 52ND02BE 10.70 52NE02BE 12.40Max. number of rowsLetter heightCharacters per row25/32"1421/4"1625/32"1421/4"16CONTROLPilot Devices16 PRODUCTS1) Automotive requires 2 1/2" mounting centers2) White letters on plastic nameplate.Discount Schedule PILOSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog16-219

Pushbutton Units and Indicator Lights30 mm Heavy Duty, Watertight/Oiltight, Class 52 Dimensional DrawingsHole ArrangementStandard 4-WayType 4X Non-Metallic.190(5)1.210(31).672(17)Type 12/13 and 4X Stainless SteelCONTROLPRODUCTS 16Enclosure Size Mounting OverallUnits A B C G H L W J T X Y1 3.50 (89) 3.25 (83) 2.75 (70) 4.00 (102) 2.38 (60) 4.50 (114) 3.47 (88) 2.31 (59) 3.00 (76) 1.73 (44) 1.86 (47)2 5.75 (146) 3.25 (83) 2.75 (70) 6.25 (159) 2.38 (60) 6.75 (171) 3.47 (88) 2.31 (59) 3.00 (76) 1.73 (44) 1.86 (47)3 8.00 (203) 3.25 (83) 2.75 (70) 8.50 (216) 2.38 (60) 9.00 (229) 3.47 (88) 2.31 (59) 3.00 (76) 1.73 (44) 1.86 (47)4 10.25 (260) 3.25 (83) 2.75 (70) 10.75 (273) 2.38 (60) 11.25 (286) 3.47 (88) 2.31 (59) 3.00 (76) 1.73 (44) 1.86 (47)6 9.50 (241) 6.25 (159) 3.00 (76) 10.00 (254) 5.38 (137) 10.50 (267) 6.47 (164) 2.56 (65) 6.00 (152) 2.11 (54) 2.61 (66)9 9.50 (241) 8.50 (216) 3.00 (76) 10.00 (254) 7.62 (194) 10.50 (267) 8.72 (221) 2.56 (65) 8.25 (210) 2.11 (54) 2.61 (66)12 11.75 (298) 8.50 (216) 3.00 (76) 12.25 (311) 7.62 (194) 12.75 (324) 8.72 (221) 2.56 (65) 8.25 (210) 2.11 (54) 2.61 (66)16 2 ) 11.75 (298) 10.75 (273) 3.00 (76) 12.25 (311) 9.88 (251) 12.75 (324) 10.97 (279) 2.56 (65) 2 ) 10.50 (267) 2.11 (54) 2.61 (66)Type 12/13 Extra Deep EnclosuresEnclosure Size Mounting OverallUnits A B C G H L W J T X Y1 4.00 4.00 4.75 4.50 3.12 5.00 4.22 4.31 3.75 2.11 2.112 6.00 4.00 4.75 6.50 3.12 7.00 4.22 4.31 3.75 2.11 1.983 8.00 4.00 4.75 8.50 3.12 4.31 3.75 2.11 1.864 10.00 4.00 4.75 10.50 3.12 11.00 4.22 4.31 3.75 2.11 1.736 9.50 6.25 4.75 10.00 5.38 4.31 6.009 9.50 8.50 4.75 10.00 7.62 10.50 8.25 2.11 2.6112 4.75 12.25 7.62 4.31 8.2516 2 ) 1 4.75 12.25 9.88 12.75 10.97 4.31 10.50 2.11 2.61Type 4X Non-MetallicPilot DevicesEnclosure Size Mounting OverallUnits 3)A B C G H L W1 6.00 3.19 3.63 4.88 2.94 6.63 3.812 6.00 3.19 3.63 4.88 2.94 6.63 3.813 8.26 3.19 3.63 7.13 2.94 8.88 3.814 10.51 3.19 3.63 9.37 2.94All dimensions shown in inches and (millimeters). Forreference purposes only. Not to be used for design orconstruction purposes.1) Grounding stud in body of enclosure.2) For stainless steel add 1.75 (45) to depth.3) No flange for mounting.16-220 Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

17SPEEDFAX TM 2007-2008 Standby GeneratorsContentsSandby Power Systems Introduction 17-2Standby Generators 17-3Standby Generator Controllers 17-4Portable Generators 17-5Transfer Switches 17-6“SR” Type Transfer Switches 17-7“X” Type Transfer Switches 17-8Manual Transfer Interlock Kits 17-9 – 17-1017 STANDBYGENERATORSResidential Commercial Industrial

Standby Power SystemsStandby Power SystemsNEWGeneralSiemens offers a complete line of standby power systems. From standby power generators, portable generators, transferswitches, and manual transfer kits, Siemens has all of your back up power needs covered. You can count on Siemens todeliver high quality, industry leading designs. Our standby generators are designed for quiet operation with soundattenuated enclosures, specially designed fans and radiators, and a high tech enclosure material that provides excellentsound absorption.Standby Generators▪ Powered by natural gas or liquid propane vapor▪ Permanently attached to the house via a fuel line and conductors hardwired to the load center▪ Completely automatic – detects power outages and switches powerover to the generator (automatic transfer switch required)▪ Restores power to pre-selected circuits or entire building▪ Returns power to utility once restored▪ Self tests weekly▪ Available in 7 to 150 kW units, single and three phaseAutomatic Transfer Switches▪ Completes the automatic system▪ Once activated by the generator controller, switches load toand from generator▪ Available in 100 to 800A versions, single and three phase,indoor and outdoorPortable Generators▪ Gasoline fueled▪ 15 and 17.5 kW units available, single phase▪ Provided with 7 various receptacles and circuit protection17STANDBYGENERATORSMechanical Interlock Kits▪ Interlocks two main breakers together (generator and utility) such thatboth cannot be “ON” at the same time▪ Wide variety of kits available to convert most Siemens load centersand meter combinations into standby power panelsFor more information including a detailed selection and application guide, generator sizing guides, cut sheets, detaileddimensions, owner’s manuals, and other useful information, visit our web site at www.sea.siemens.com/generators.For technical support, call (800) 844-0029.17-2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Standby Power SystemsStandby Generators7 through 150 kW1-Phase, 120/240 Volts AC3-Phase, 120/208 Volts AC3-Phase, 277/480 Volts ACFeatures and Ratings▪ UL 2200 Listed▪ Natural gas or liquid propane vapor options▪ Composite mounting pad provided on air cooled units▪ Automatic Transfer Switch compatibility:Air cooled units compatible with “ST” and “SR” type20-60 kW units compatible with “SR” type70-150 kW units compatible with “X” type▪ 16 kW units and larger are provided with the patentedQuiet Test feature. This feature allows the generatorto run at lower RPM’s during the weekly test cycle,greatly reducing noise pollution.▪ Rugged, textured paint finish provides superior corrosionresistance▪ Aluminum enclosure option ideal for harsh environmentsSelectionLiquid Cooled GeneratorAir Cooled GeneratorCatalog Logic TableSiemensStandbyGeneratorkWRatingVoltageR=120/240, 1ØC=120/208, 3ØI = 277/480, 3ØFuelG=Natural GasP =PropaneB=Accepts bothEnclosureA=AluminumS=SteelSG 007 R B SSG 010 R B SSG 013 R B SSG 016 R B S, ASG 018 R, C B S, ASG 020 R, C B S, ASG 025 R,C B S, ASG 035 R, C, I B S, ASG 045 R, C, I B S, ASG 060 R, C, I G, P S, ASG 070 R, C, I G, P S, ASG 080 R, C, I G, P S, ASG 100 R, C, I G, P S, ASG 130 R, C, I G, P S, ASG 150 R, C, I G, P S, AGenerator InformationDimensions(inches)ControllerTypeCoolingSystemTransferSwitchCompatible48 x 24 x 29 R Air ST, SR48 x 24 x 29 R Air ST, SR48 x 24 x 29 R Air ST, SR48 x 24 x 29 R Air ST, SR72 x 30 x 38 R Liquid SR72 x 30 x 38 R Liquid SR72 x 30 x 38 R Liquid SR77 x 34 x 46 R Liquid SR77 x 34 x 46 R Liquid SR89 x 34 x 48 R Liquid SR97 x 37 x 47 H Liquid X116 x 37 x 55 H Liquid X116 x 37 x 55 H Liquid X116 x 37 x 55 H Liquid X116 x 37 x 55 H Liquid X17 STANDBYGENERATORSCatalog number exampleRequirements:1. Standby Generator2. 35 kW3. 3-Phase, 120/208 V~4. Natural Gas5. Aluminum Enclosure1 2 3 4 5SG 035 C B AExample = SG035CBASiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 17-3

Standby Power SystemsStandby Generator ControllersSelectionSiemens standby generators are provided with controllers. The primary purpose of the controller is to monitor utility power,operate the automatic transfer switch, control the weekly self test cycle, and to monitor the generator for any potential systemfaults. There are two types of controllers, the “R” and “H” types.“R” Type ControllerThe “R” type controller is provided on all 7 through 60 kW generators. Thesecontrollers are compatible with the “ST” and “SR” type transfer switches.Built in governor control is provided, along with LED displays for potentialsystem faults.The automatic transfer switch, which is sold separately, is controlled by the Rcontroller.Control FunctionsFull system monitoring▪ Oil Pressure▪ Coolant Temperature▪ Engine Speed▪ Coolant Level▪ Cranking Time▪ Starter Lockout▪ Utility Sensing▪ Quiet TestLED Indicators▪ Over Speed▪ Over Crank▪ Low Oil Pressure▪ High Coolant Temperature▪ Low Coolant Level▪ Low Fuel Pressure▪ Low Battery Voltage▪ Quiet Test Control“H” Type Controller17STANDBYGENERATORSThe “H” type controller is provided on all 70 through 150 kW generators.These controllers are compatible with the “X” type transfer switches.Control FunctionsAll R control functions plus:▪ Full range standby operation▪ Full system status- 3Ø AC Volts and current- Alternator frequency- kW, kVA, power factor- Fuel pressure- Alarms and warnings- Transfer switch status- Operating hours- Service reminders- Trending- Utility Sensing▪ Fault protection for generatorwindings▪ 3Ø sensing voltage regulator▪ Isochronous speed regulationSystem Features▪ Two 4-line 20-character LCDdisplays▪ Engine governor and voltageregulator built into controller▪ Hermetically sealed circuit board ina die-cast aluminum enclosure▪ Waterproof connections▪ Audible alarm▪ Service-friendly diagnostics▪ Built in PLC for user I/O’s▪ Integrated automatic transfer switchcontroller for Siemens “X” typetransfer switches▪ Advanced engine sensors eliminatefalse signals and interference▪ Quiet-Test control▪ Industry standard 2-wire start17-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Standby Power SystemsPortable GeneratorsPortable GeneratorsPortable generators are contained in a steel frame with wheels foreasy relocation. The generators are powered by gasoline stored in aprovided gas tank. These generators are ideal for locations wherespace or local codes do not allow a permanently installed standbygenerator. They are also great for construction site temporary power,eliminating the need for temporary power poles and utility hook ups.Features and Ratings▪ Provided with 7 receptacles- 12V DC, 10A- 120V AC, 20A Duplex- 120V AC, 20A Duplex GFCI- 120V AC, 30A Locking Type (2)- 120/240V AC, 30A Locking Type- 120/240V AC, 50A▪ Full pressure lubrication▪ Single point lifting▪ Spin-on oil filter▪ Automatic idle control▪ Dimensions (in): 39 x 31 x 49▪ 16 gallon fuel tank▪ Low oil pressure shutdown▪ Solid state voltage regulator▪ GFCI protection▪ Anti-vibration system▪ Circuit breakers included▪ Battery charge cables▪ Maintenance free battery▪ Full 1-1/4" tubular frame▪ Wheel kit▪ Electronic governor▪ Tune-up kitSelectionCatalog Number PG015 PG017 Rated Power 15 kW 17.5 kWSurge 22.5 kW 26.2 kWRated Amps @ 60Hz120/240, 1Ø, 1.0 pf62.5 73.0Engine RPM 3,600 3,600Engine Cooling Air AirFuel Capacity (gallons) 16 16Dimensions (inches) 39x31x49 39 x 31 x 49Weight (lbs) 450 475Manual Transfer Kit Standby and Portable Generator Maintenance KitsMaintenance KitsGenerators require routine servicing just like any other engine. It isrecommended that the oil and filters be changed once a year, or every100 hours of use, which ever comes first. Maintenance kits areprovided for each engine type and include and oil filter, air filter, sparkplugs, and tools.Catalog Number Description Usage17 STANDBYGENERATORSGENMKIT1 Oil and air filter kit 7 kWGENMKIT2 Oil and air filter kit 10 kWGENMKIT3 Oil and air filter kit 13, 16 kWGENMKIT4 Oil and air filter kit 20 kWGENMKIT5 Oil and air filter kit 25 kWGENMKIT6 Oil and air filter kit 35, 45 kWGENMKIT7 Oil and air filter kit 60 kWGENMKIT8 Oil and air filter kit 70, 80, 130, 150 kWGENMKIT9 Oil and air filter kit 100 kWGENPAINT Touch up paint All devicesPORTMKIT1 Oil and air filter kit Portable 15, 17.5 kW The 17.5 kW portable generator is provided with amanual transfer kit. The kit includes a load center(G2020L1125CU), factory installed interlock kit(ECSBPK01), a 50A utility main, 50A generator main, amixture of branch circuits, a 15' power cord, and aninlet box as shown. The kit is not sold separately and isnot provided on the 15 kW portable generator.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 17-5

Standby Power SystemsTransfer SwitchesAutomatic Transfer SwitchesSelectionThere are 3 types of transfer switches. “ST” type transfer switches are provided with branch circuits are compatible with theair cooled generators. “SR” type are compatible with generators containing the “R” type controller (7-60 kW). The “X” typetransfer switches are compatible with the “H” type controller (70-150 kW generators).Transfer Switch Catalog Number LogicTransfer TypeEnclosure TypeT=IndoorR=OutdoorAmperageVoltageR=120/240V 1ØC=120/208 3ØI = 277/480V 3ØService DisconnectD=ProvidedBranch CircuitsIncludedS T 100 R 10, 12, 16S R 100, 200 R DS R 100, 200 R, C, IS R 400 R, C DXR, T100, 150, 200, 300,400, 600, 800R, C, I17STANDBYGENERATORS“ST” Type Transfer SwitchesTransfer Switches With Back Up CircuitsSiemens offers 3 models of automatic transfer switches with back up circuits.These panels provide transfer capability to a select number of critical circuits, asopposed to the entire house. For the chosen critical circuits, the conductors in themain house panel are removed from the breaker and connected with wire nuts tothe pre-wired conductors on the transfer switch.Features and Ratings▪ UL 1008 Listed▪ 100A▪ 120/240, 1Ø▪ Indoor NEMA Type 1▪ Open Transition▪ 10KAIC▪ Express install kit included▪ Dimensions (inches) 27 x 13 x 7▪ Conduit length: 30 feet from ATS to junction box, 5 feet fromjunction box to generator, 2 feet from ATS to load center▪ Suitable for use only on air cooled products (7-16 kW)Catalog NumberBreakers ProvidedQ250 Q240 Q230 Q220 Q120 Q115 Suggested UseST100R12 (12 ckt) 1 1 3 3 10 kW GeneratorsST100R10 (10 ckt) 1 1 3 5 13 kW GeneratorsST100R16 (16 ckt) 1 1 1 5 5 16 kW Generators17-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Standby Power Systems“SR” Type Transfer SwitchesFeatures and Ratings▪ UL 1008 Listed▪ 100-400A▪ Outdoor NEMA Type 3R▪ 1-Phase and 3-Phase▪ Open Transition▪ Service entrance rated option▪ Compatible with “R” type controllers found in 7-60 kW generatorsSelectionCatalogNumberAmp120/2401ØVoltage NEMA Service120/208 277/4801 3R 123Ø 3ØDisconnectIncludedSR100R 100 • •SR100RD 100 • • •SR100C 100 • •SR100I 100 • •SR200R 200 • •SR200RD 200 • • •SR200C 200 • •SR200I 200 • •SR400R 400 • •SR400RD 400 • • •SR400C 400 • •AMPS 100 100* 200 200* 400 400* 400VoltageWithstand Rating1Ø3ØDimensions12/240 & 120/208277/480Weight (lbs)120/240 1Ø120/208 3Ø277/480 3Ø120/240 1Ø120/208 3Ø277/480 3Ø10 kAIC14 kAIC24 x 20 x 736 x 24 x 10314995120/240 1Ø 120/240 1Ø120/208 3Ø277/480 3Ø10 kAIC 10 kAIC25 kAIC24 x 13 x 7 24 x 15 x 748 x 30 x 1239 3149105120/240 1Ø 120/240 1Ø120/208 3Ø10 kAIC 18 kAIC18 kAIC120/240 1Ø18 kAIC24 x 13 x 7 36 x 24 x 10 40 x 30 x 1040 88107100277/480 3Ø35 kAIC48 x 30 x 1210517 STANDBYGENERATORS* Service entrance rated, main disconnect provided (type QP for 100A, QN for 200A).Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 17-7

17STANDBYGENERATORSStandby Power Systems“X” Type Transfer SwitchesFeatures and Ratings▪ UL 1008 Listed▪ 100-800A▪ Indoor NEMA Type 1 and 12▪ Outdoor NEMA Type 3R▪ 1-Phase and 3-Phase options▪ Open Transition▪ Compatible with “H” type controllersfound in 70-150 kW generators▪ 7 day programmable exerciserCatalogNumberAmp120/2401ØVoltage120/2083Ø277/4803ØNEMASelection1 3R 12XT100R 100 • •XT100C 100 • •XT100I 100 • •XR100R 100 • •XR100C 100 • •XR100I 100 • •XT150R 150 • •XT150C 150 • •XT150I 150 • •XR150R 150 • •XR150C 150 • •XR200I 200 • •XT200R 200 • •XT200C 200 • •XT200I 200 • •XR200R 200 • •XR200C 200 • •XR200I 200 • •XT300R 300 • •XT300C 300 • •XT300I 300 • •XR300R 300 • •XR300C 300 • •XR300I 300 • •XT400R 400 • •XT400C 400 • •XT400I 400 • •XR400R 400 • •XR400C 400 • •XR400I 400 • •XT600R 600 • •XT600C 600 • •XT600I 600 • •XR600R 600 • •XR600C 600 • •XR600I 600 • •XT800R 800 • •XT800C 800 • •XT800I 800 • •XR800R 800 • •XR800C 800 • •XR800I 800 • •AMPS 100 150 200 300 400 600 800Voltage120/240 1Ø120/208 3Ø277/480 3Ø120/240 1Ø120/208 3Ø277/480 3Ø120/240 1Ø120/208 3Ø277/480 3Ø120/240 1Ø120/208 3Ø277/480 3Ø120/240 1Ø120/208 3Ø277/480 3Ø120/240 1Ø120/208 3Ø277/480 3Ø120/240 1Ø120/208 3Ø277/480 3ØNEMA Rating 1 / 3R 1 / 3R 1 / 3R 1 / 3R 1 / 3R 12 / 3R 12 / 3RWithstand Rating120/240 & 120/208277/480Dimensions120/240 & 120/208277/480Weight (lbs)120/240 & 120/208277/48014 kAIC14 kAIC36 x 24 x 1036 x 24 x 1010512010 kAIC25 kAIC36 x 24 x 1048 x 30 x 1211014510 kAIC25 kAIC36 x 24 x 1048 x 30 x 1211014518 kAIC35 kAIC36 x 24 x 1048 x 30 x 1213016518 kAIC35 kAIC36 x 24 x 1048 x 30 x 1213016542 kAIC42 kAIC66 x 36 x 2066 x 36 x 2065065065 kAIC65 kAIC66 x 36 x 2066 x 36 x 2068068017-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Standby Power SystemsManual Transfer Interlock KitsManual Transfer Interlock KitsThese interlock kits are used to interlock two main breakersin a load center or meter combination together so that bothcannot be “ON” at the same time. This is required toprevent dangerous feedback between the two powersystems. These kits work on most Siemens load centersand meter combinations.DescriptionAttaches to two doublepole circuit breakersacross from one anotheras shownCatalog NumberBreaker TypesUtility / StandbyECSBPK01QP / QPSelectionImageStandard Features▪ UL listed for use in most Siemens load centers andmeter combinations▪ Suitable for use with optional standby systems inaccordance with article 702 of the National ElectricCode ®▪ Corrosion resistant finish▪ Easy assembly requiring no modifications to the loadcenter or meter combination▪ Remains attached to the main breakers when loadcenter cover is removedAttaches to two doublepole circuit breakers sideby side to one another asshownUsed on Ultimate mainbreaker load centers150-225A as shownECSBPK02QP / QPECSBPK03MBK / QPMisapplicationsFollow all directions and precautions detailed in theinstructions sheets. Do not use the interlock kits insuch a manner that power is not prevented from beingfed back to the utility lines when the utility mainbreaker is in the “OFF” position. Examples would bemeter combinations in which the conductors from themeter land on lugs, as opposed to a main breaker(see below).Used on Ultimate mainbreaker load centers100-125A as shownAttaches to type QN mainbreakers and double polebreakers as shownECSBPK04MBK / QPECSBPK05QN / QPAttaches to type QNRmain breakers anddouble pole breakers asshownECSBPK06QNR / QP17 STANDBYGENERATORSAttaches to two type QNRor QN main breakers asshownECSBPK07QN(R) / QN(R)Attaches to two type QNRor QN main breakers asshownECSBPK08QPP / QPSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 17-9

Standby Power SystemsManual Transfer Interlock KitsAcceptable Usage of Interelock Kits by Load Center/Meter CombinationSelectionSiemens Outdoor Load CentersSiemens Indoor Load CentersSiemens Meter CombinationsW0816B1200CT 3E0816ML1125* 1 2MC0816B1150RTH 5 7W0816L1200CT 1 2 3 5 7E1020MB1100FCGP 1 2MC0816B1150T 5 7W0816ML1125CU 1 2E1224ML1100* 1 2MC0816B1150TH 5 7W1212L1125CU 1 2 4G1212L1125* 1 2 4MC0816B1200FCTM 2W1224B1100CU 4G1224B1100* 4MC0816B1200RT 5 7W1224L1125CU 1 2 4G1224L1125* 1 2 4MC0816B1200RTB 5 7W1224L1200CU 1 2 3 5 7G1224L1200CU 1 2 3 5 7MC0816B1200RTH 5 7W1224L1225CU 1 2 3 5 7G1624B1100* 4MC0816B1200SCTM 2W1624B1100CU 4G1624L1125* 1 2 4MC0816B1200T 5 7W1624L1125CU 1 2 4G1630B1150 3MC0816B1200TH 5 7W2020B1100CU 4G2020B1100* 4MC0816B1350RLTM 5 7W2030L1150CU 1 2 3 5 7G2020L1125* 1 2 4MV0816B1400RLTM 5 7W2040B1200CU 3W2040L1200CU 1 2 3 5 7W3040B1200CU 3G2030B1150* 3G2030L1125CUSG 1 2 4G2030L1150* 1 2 3 5 7MC1224B1100FEC 2MC1224B1100SEC 2MC1224B1125 1 2W3040L1125CU 1 2 4G2040B1200* 3MC1224B1125FEC 2W3040L1200CU 1 2 3 5 7G2040L1200* 1 2 3 5 7MC1224B1125SEC 2W4040B1200CU 3G2424B1100CU 4MC1632B1100SEC 2W4040L1200CU 1 2 3 5 7G2424B1125 4MC1632B1125FEC 2W4242B1225CU 3G2424L1125 1 2 4MC2040B1150 5 7W4242L1225CU 1 2 3 5 7G2430B1150 3MC2040B1200 5 7G2430L1125CUSG 1 2 4MC2040B1200R 5 717STANDBYGENERATORSNotes▪ Numbers 1 through 9 in thesetables represent the interlock kitnumber. Example: 1 = ECSBPK01▪ Standby power interlock kits are notintended for use with AFCI, GFCI,3-pole, or 1 ⁄2" frame breakers▪ Standby power interlock kits are notintended for use with 4 space,125A load centers▪ These kits are not intended foruse in meter combination deviceswhere the conductors coming fromthe meter compartment land onlugs in the load center side, asopposed to a main breaker.Examples would include devicesthat start with MM0406L,MM0606L, or MC1212LG2440B1200 3G2440L1125CU 1 2 4G2440L1200* 1 2 3 5 7G3030B1100CU 4G3030B1150* 3G3030L1200* 1 2 3 5 7G3040B1200* 3G3040L1125CU 1 2 4G3040L1200* 1 2 3 5 7G4040B1200* 3G4040L1125CU 1 2 4G4040L1200* 1 2 3 5 7G4242B1225CU 3G4242L1225CU 1 2 3 5 7MC2442B1200FEC 2MC2442B1200SEC 2MC3040B1200SECW 5 7MC3042B1200FED 3MC3042B1200SED 3MC3042B1225FED 3MC3042B1225SED 3MC4040B1200SECW 5 7MC0816B1200RJBT 8MC0816B1150RJBT 8MC0816B1200RCT 8MC0816B1150RCT 8MC0816B1200CT 8MC0816B1150CT 8MC2040B1150RCT 9MC2040B1150CT 9MC2040B1200RCT 9MC2040B1200CT 917-10Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

18SPEEDFAX TM 2007-2008 TechnicalContentsSiemens Design Assistant Disc 18-2Types of Power Distribution Systems 18-3 – 18-5Ground Fault Protection 18-6 – 18-12Overcurrent Protection and Coordination 18-13System Analysis 18-14Current Limiting Circuit Breaker Technology 18-15Series-Connected Combination Ratings 18-16Harmonics / K-factor Ratings 18-17 – 18-18Table 1:Ampacities of Insulated Conductors 18-19Table 2:Correction Factors for Ambient Temperatures 18-19Table 4A:Motor Full-Load Currents ofThree Phase AC Induction Type Motors 18-20Table 4B:Motor Full-Load Currents in Amperes,Single Phase AC 18-20Table 4C:Motor Full-Load Currents in Amperes, DC 18-20Table 4D:Conversion Table of Polyphase Design 18-20Table 5:Normal-Load and Fault Currents ofThree Phase Transformers 18-20Table 6:Electrical Formulas for Finding Amperes,Horsepower Kilowatts, and kVA 18-21Table 7:Grounding Electrode Conductor forAC Systems 18-21Table 8:Minimum Size Grounding Conductors forGrounding Raceways and Equipment 18-21Molded Case Circuit Breakers 18-22 – 18-24Conversion Table 18-2518 TECHNICALResidential Commercial Industrial

TechnicalSiemens Design Assistant DiscReferenceTo assist consulting electrical engineers and designers,Siemens has introduced the Design Assistant. This disc,available at no charge from your local Consultant AccountManager, includes tools and reference that will make your jobeasier. Some of the contents are:Design Calculators▪ Available Fault Current Calculator▪ Advanced Voltage Drop Calculator▪ Panelboard Schedule (Excel and CADD)▪ Equipment Sizing Assistant▪ Conduit Fill Calculator▪ Circuit Breaker Time Current Curve Program▪ Basic Lighting Calculator▪ Switchboard Heat Output Calculator▪ Switchboard Weight Calculator▪ TVSS Sizing Assistant▪ Motor Data Calculator▪ and more…Training▪ Step2000 Training Programs (19 books in all), includingBasics of Electricity, Drives, Panelboards, MCC’s, PLC’sand Energy Measurement.Specifications▪ Specifications in Microsoft Word format for all ourDivision 16 and Division 26 products (more than 45sections), including commissioningTechnical Information▪ Checklists and Common Forms▪ CADD Blocks of switchboardsand substations▪ Technical Information and White Papers18TECHNICALReference▪ All our Selection & Application Guides,brochures, installation manuals, and more▪ Full pdf versions of our SpeedFax andIndustrial Controls CatalogsFor a copy of the Siemens Design Assistant Disc, contactyour local Consultant Account Manager or Sales Engineer.18-2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

TechnicalTypes of Power Distribution SystemsThere are several basic considerationswhich must be included by the systemdesign engineer to select and design thebest power distribution system which willsupply power to both present and futureloads most economically. Among theseare:▪ Safety▪ Reliability▪ Maintenance▪ Flexibility▪ Voltage Regulation▪ Initial Investment▪ Simplicity of OperationThe characteristics of electrical serviceavailable at the building site, the types ofloads, the quality of service required, andthe size and configuration of building arealso important factors that will influencesystem design and circuit arrangement.Four basic circuit arrangements are usedfor the distribution of electric power. Theyare the radial, primary selective, secondaryselective, and secondary network circuitarrangements. The following discussion ofthese circuit arrangements covers boththe high-voltage and low-voltage circuits.The reader should recognize that the highvoltagecircuits and substations may beowned by either the utility company or thebuilding owner, depending upon theelectric rates, the practice, andrequirements of the particular electricutility serving the specific building site.Radial SystemIf power is brought into a building atutilization voltage, the simplest and thelowest cost means of distributing thepower is to use a radial circuitarrangement. The radial system is thesimplest that can be used, and has thelowest system investment. It is suitable forsmaller installations where continuity ofservice is not critical.The low voltage service entrance circuitcomes into the building through serviceentrance equipment and terminates at amain switchgear assembly, switchboard orpanelboard. Feeder circuits are provided tothe loads or to other subswitchboards,distribution cabinets, or panelboards.Figure 1 shows the two forms of radialcircuit arrangements most frequentlyused. Under normal operating conditions,the entire load is served through thesingle incoming supply circuit, and in thecase of high voltage service, through thetransformer. A fault in the supply circuit,the transformer, or the main bus willcause an interruption of service to allloads. A fault on one of the feeder orbranch circuits should be isolated from therest of the system by the circuit protectivedevice on that circuit. Under thiscondition, continuity of service ismaintained for all loads except thoseserved from the faulted circuit.The need for continuity of service oftenrequires multiple paths of power supply asopposed to the single path of powersupply in the radial system.Figure 2. Expanded Radial System—SinglePrimary FeederA fault in a primary feeder in thearrangement shown in Figure 2 will causethe main protective device to operate andinterrupt service to all loads. If the faultwere in a transformer, service could berestored to all loads except those servedfrom that transformer. If the fault were ina primary feeder, service could not berestored to any loads until the source oftrouble had been eliminated. Since it is tobe expected that more faults will occur onthe feeders than in the transformers, itbecomes logical to consider providingindividual circuit protection on the primaryfeeders as shown in Figure 3. Thisarrangement has the advantage ofSelectionFigure 3. Expanded Radial Systemsindividual Primary Feeder Protectionmaking it possible to limit outages due toa feeder or transformer fault to the loadsassociated with the faulted equipment. Ifcircuit breakers are used for primaryfeeder protection, the cost of this systemwill be high. Even if fused switches areused, the cost of the arrangement ofFigure 3 will exceed the cost of thearrangement of Figure 2.Primary Selective SystemThe circuit arrangement of Figure 4provides means of reducing both theextent and duration of an outage causedby a primary feeder fault. This operatingfeature is provided through the use ofduplicate primary feeder circuits and loadinterrupter switches that permitconnection of each secondary substationtransformer to either of the two primaryfeeder circuits. Each primary feeder circuitmust have sufficient capacity to carry thetotal load in the building.Figure 4. Primary Selective Systems18 TECHNICALFigure 1. Radial SystemsSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 18-3

18TECHNICALTechnicalTypes of Power Distribution SystemsUnder normal operating conditions, theappropriate switches are closed in anattempt to divide the load equallybetween the two primary feeder circuits.Then, should a primary feeder fault occur,there is an interruption of service to onlyhalf of the load. Service can be restored toall loads by switching the deenergizedtransformers to the other primary feedercircuit. The primary selective switches areusually manually operated and outagetime for half the load is determined by thetime it takes to accomplish the necessaryswitching. An automatic throwoverswitching arrangement could be used toavoid the interruption of service to half theload. However, the additional cost of theautomatic feature may not be justified inmany applications. If a fault occurs in asecondary substation transformer, servicecan be restored to all loads except thoseserved from the faulted transformer.The higher degree of service continuityafforded by the primary selectivearrangement is realized at a costsomewhat higher than a simple radialsystem due to the extra primary cablesand switchgear.Secondary Selective SystemUnder normal conditions, the secondaryselective arrangement of Figure 5 isoperated as two separate radial systems.The secondary tie circuit breaker in eachsecondary substation is normally open.The load served from a secondaryselective substation should be dividedequally between the two bus sections. If afault occurs on a primary feeder or in atransformer, service is interrupted to allloads associated with the faulted feeder ortransformer. Service may be restored to allsecondary buses by first opening the mainsecondary switch or circuit breakerassociated with the faulted transformerand primary feeder, and then closing thetie breaker. The two transformersecondary circuit breakers in eachsubstation should be interlocked with thesecondary tie breaker in such a mannerthat all three cannot be in the closedposition simultaneously. This preventsparallel operation of the two transformersand thereby minimizes the interruptingduty imposed on the secondary switchingdevices. It also eliminates the possibility ofinterrupting service to all loads on the buswhen a fault occurs in either a primaryfeeder or a transformer.The cost of the secondary selectivesystem will depend upon the sparecapacity in the transformers and primaryfeeders. The minimum transformer andprimary feeder capacity will be determinedFigure 5. Secondary Selective SystemUsing Close-Coupled Double-EndedSubstationby essential loads that must be servedunder emergency operating conditions. Ifservice is to be provided for all loadsunder emergency conditions, then eachprimary feeder should have sufficientcapacity to carry the total load, and eachtransformer should be capable of carryingthe total load in each substation.This type of system will be moreexpensive than either the radial or primaryselective system, but it makes restorationof service to all essential loads possible inthe event of either a primary feeder ortransformer fault. The higher cost resultsfrom the duplication of transformercapacity in each secondary substation.This cost may be reduced by sheddingnonessential loads.A modification of the secondary selectivecircuit arrangement is shown in Figure 6.In this arrangement there is only onetransformer in each secondary substation,but adjacent substations areinterconnected in pairs by a normally openlow voltage tie circuit. When the primaryfeeder or transformer supplying onesecondary substation bus is out of service,the essential loads on that substation buscan be supplied over the tie circuit. Theoperating aspects of this system aresomewhat complicated if the twosubstations are separated by distance.The best arrangement is to use closecoupled,double-ended substations.Secondary Network SystemMany buildings with radial distributionsystems are served at utilization voltagefrom utility secondary network systems.The network supply system assures arelatively high degree of service reliability.The utility network may take the form of aSelectionFigure 6. Secondary Selective SystemUsing Two Single-Ended SubstationsWith Cable or Bus Tiedistributed network or a spot network. Ifthe building demand is in the order of 750kVA or higher, a spot network will often beestablished to serve the building. Inbuildings where a high degree of servicereliability is required, and where spotnetwork supply may not be available, thedistributed secondary network system isoften used. This is particularly true ofinstitutional buildings such as hospitals.The network may take the form of severalsecondary substations interconnected bylow voltage circuits. However, the mostcommon practice is to use some form ofthe spot network circuit arrangement.Figure 7. Simple Spot Network SystemA simple spot network, such as shown inFigure 7, consists of two or more identicaltransformers supplied over separateprimary feeder circuits. The transformersare connected to a common low voltage18-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

TechnicalTypes of Power Distribution Systemsbus through network protectors and areoperated in parallel. A network protectoris an electrically operated power circuitbreaker controlled by network relays insuch a way that the circuit breakerautomatically opens when power flowsfrom the low voltage bus toward thetransformer. When voltages in thesystem are such that power would flowtoward the low voltage bus from thetransformer, it will close automatically.Network protectors are normallyequipped with relays which operate forfaults in the network transformer or highvoltage feeder only. The network is oftenoperated on the assumption thatnetwork failure will “burn” open.Network protectors withoutsupplementary protection do not meetthe requirements of the NEC forovercurrent, ground fault, or short circuitprotection. Protection of the network orcollector bus may be added by providingsensing devices, including ground faultdetection, with tripping of the networkprotectors. The most common use of thenetwork protector, however, has been byutilities in vaults where failure of thenetwork devices could cause damagelimited to the vault. High integrity designinvolving wide phase separation and theuse of “catastrophe” fusing minimize thedanger and extent of a network failure. Aconventional circuit breaker with timeovercurrent and instantaneous tripdevices plus network relays can meetthe NEC requirements. However, the fullreliability of the network may becompromised since selectivity betweenthese devices is difficult to obtain.Under normal operating conditions, thetotal load connected to the bus is sharedequally by the transformers. Should afault occur in a transformer or on a primaryfeeder, the network protectorassociated with the faulted transformeror feeder will open on reverse powerflow to isolate the fault from the lowvoltage bus. The remaining transformeror transformers in the substation willcontinue to carry the load and there willbe no interruption of service to the loads,except for a voltage dip during the timethat it takes for the protective equipmentto operate.If only two transformers are used in aspot network substation, eachtransformer must be capable of carryingthe total load served from the lowvoltage bus. The amount of sparetransformer capacity in the substationcan be reduced by using a primaryselective switching arrangement witheach transformer, or by using three ormore transformers. If the primaryselective switching arrangement is used,the total load can be about 160 percentof the nameplate rating of one of thetransformers. This produces an overloadon one transformer until such time asthe remaining transformer can beswitched to the other feeder in the caseof a primary feeder fault.The interrupting duty imposed on thelow voltage protective devices in a spotnetwork substation is higher than inradial, primary selective, or secondaryselective substations having the sameload capability because of the sparetransformer capacity required in the spotnetwork substation and because thetransformers are operated in parallel.Figure 8. Secondary Network SystemThe spare transformer capacity, thenetwork protectors, and the higherinterrupting duty will make the secondarynetwork arrangement much moreexpensive than the other arrangements.At the same time, these elements makethe reliability of the network systemgreater than for the other systemconfigurations.The secondary network may also takethe form shown in Figure 8. In thisarrangement there is only onetransformer in each secondarysubstation, and the substations areinterconnected by normally closed lowvoltage tie circuits. The tie circuits permitinterchange of power betweensubstations to accommodate unequalloading on the substations and to providemultiple paths of power flow to theSelectionFigure 9. Primary Selective SecondaryNetwork Systemvarious load buses. In normal operation,the substations are about equally loadedand the current flowing in the tie circuitsis relatively small. However, if a networkprotector opens to isolate a transformeron a primary feeder fault, the load on theassociated bus is then carried by theadjacent network units and is suppliedover the tie circuits. This arrangementprovides for continuous power supply toall low voltage load buses, even though aprimary feeder circuit or a transformer istaken out of service.In the network arrangement in Figure 9,if there were three incoming primaryfeeder circuits and three transformers,the combined capacity of two of thetransformers should be sufficient to carrythe entire load on the three substationson the basis that only one feeder is outof service at one time. Generally, thesetransformers would all have the sameratings. With this arrangement, as withthe spot network arrangement, areduction in spare transformer capacitycan be achieved, if a primary selectiveswitching arrangement is used at eachsubstation transformer. However, if threeor more primary feeder circuits areavailable, the reduction in transformercapacity achieved through the use of aprimary selective arrangement may besmall.Cable ties or busway ties, as shown inFigures 8 and 9, will require carefulconsideration of load distribution duringcontingencies and of the safety aspectswith regard to backfeeds. Key or othermechanical interlocking of switches orcircuit breakers may be essential.18 TECHNICALSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 18-5

18TECHNICALTechnicalGround Fault ProtectionThe term “low magnitude” arcing groundfault is a deceptive description of thistype fault. What is meant by this is thatthe fault current magnitude is lowcompared to that of a bolted fault. Evenso, the arc energy released at the pointof the fault can cause much damage andmay result in a fire. A ground fault is aninsulation failure between an energizedconductor and ground. A phase-to-groundarcing fault, unlike a phase-to-phasebolted fault, is a high-impedance typefault. The factors that contribute to thishigh impedance are the resistance of thearc and the impedance of the return path.This return path is usually metal conduit,raceway, busway housing or switchboardframes. Another contributing factor is thespasmodic nature of the arc. The circuitbreaker or fuse protecting the circuitdetects the fault current, but the actualground fault current magnitude is everchanging due to arc elongating blowouteffects, self-clearing attempts and arcreignition.These current limiting effects make thecircuit breaker or fuse incapable ofdetecting the actual damage that isoccurring. This is not to imply that thesedevices are inadequate. The problem isone of system protection because thecircuit breaker must be adjusted (or fusesize selected) so as to hold withouttripping under momentary overloadconditions, such as motor starting currentor transformer inrush current. Therefore,the circuit breaker or fuse cannot openquickly enough under relatively lowmagnitude faults to limit the arcingdamage.Figure 10 illustrates the basic problem.Shown is a typical distribution systemwith a 1600 ampere main serviceentrance unit with a circuit breaker(single line “a”) or fused serviceprotector (single line “b”). A ground faultof 1500 amperes on the bus would affectbut would not open either device. A 4000ampere ground fault would be cleared inapproximately 35 seconds by the circuitbreaker and in 230 seconds by the fuse.To allow a fault of this magnitude topersist for this length of time wouldcreate more than 92,000 kW seconds ofarc energy. As a result of tests made, ithas been determined that an arc with avalue of 1050 kW seconds of energywould vaporize about 1.0 cubic in. ofcopper or 2.5 cubic in. of aluminum.Obviously a fault of the magnitudeshown in Figure 10 could cause aconsiderable amount of damage.The nature of low-level arcing groundfaults makes impractical their detectionFigure 10. Ground Fault Protectionby a traditional overcurrent devices. Tocomplete total protection of the systemagainst all possible types of faults, othermeans are utilized to detect ground faultcurrents, including:▪ Zero sequence method▪ Source ground current (or groundreturn) method▪ Residual connection methodZero Sequence MethodThis is commonly used when groundfault protection is provided for equipmentemploying electromechanical tripdevices. The scheme uses a corebalance type current transformer (groundsensor) which encircles all phaseconductors (and neutral on four wiresystem) to detect ground faults.The operation of this system is such thatunder normal operating conditions (eg.,no ground fault on the system) there isSelectionno output from the ground sensor to thetripping relay because the vector sum ofall the currents through the sensorwindow is zero.(I a + l b + I c + I n = 0)If a ground fault occurs on the system,there is now an additional current (I g )seen by ground sensor which returns tothe source by a path other than throughthe sensor window. The sensor nowsees an unbalance caused by Ig andoperates the ground relay which trips thecircuit protector.(I a + l b + l c + I n = I g )The ground sensor is locateddownstream from the point at which thesystem is grounded and can be mountedeither on the line side or load side of themain disconnect device. This method canbe used on incoming main disconnect oron feeders.18-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

TechnicalGround Fault ProtectionSource Ground Current (or GroundReturn) MethodThis method of detecting the groundfault current Ig locates the groundsensor on the neutral connection toground at the service entrance. Thismeans that the ground sensor onlydetects ground fault current. This type ofdetection has some limitations becauseit is detecting the ground fault returncurrent. On multiple source systemswith multiple connections to ground, thisground fault current can return by morethan one path, therefore, somesensitivity in detecting these faultswould be lost.Residual Connection MethodCurrent sensors, one on each of thephase conductors and on the neutralconductors, are connected in common.This common (or residual connection)measures the vector summation of thephase currents and the neutral current.Under normal conditions, this vectorsummation will be zero, and no currentwill be applied to the ground relay.If a fault involving ground occurs, thecurrent summation is not equal to zero.Current flows into common connectionwhich is applied to the relay. Thismethod of detecting ground fault currentis used in circuit breakers with electronictrip device.Figure 11. Schematic for Zero SequenceFigure 12. Schematic for Source Ground CurrentGFS = Ground Fault SensorGFP = Ground Fault Protection(Relay or Trip Unit)SelectionResidual Ground CurrentSensing3-Wire SystemThis system is used with electronic tripunits, and always includes three currentsensors mounted on the circuit breaker.A trip element is connected in serieswith each sensor to provide phaseovercurrent protection. By adding aground trip element in the residual(neutral) circuit of the three currentsensors, it will sense ground fault currentonly, and not load current. This permitsmore sensitive settings to protectagainst low magnitude ground faults.This scheme is shown in Figure 14.Under normal conditions, the vector sumof the current in all of the phases equalszero. No current would flow in the GNDelement, which is also true under thecondition of a phase-to-phase fault.A phase-to-ground fault would cause acurrent to flow in the GND trip element.If the magnitude of this current exceedsthe pickup setting for the required time,the trip unit will operate to trip thebreaker.Figure 13. Schematic for Residual MethodFigure 14. Schematic for Ground Protection on 3-Wire Systems, Residual Sensing18 TECHNICALSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 18-7

TechnicalGround Fault Protection4-Wire SystemTo avoid false tripping, a fourth currentsensor is connected in the neutralconductor to sense normal neutralcurrent. This fourth sensor is connectedso that it cancels the normal neutralcurrent which is developed in the residualcircuit as shown in Figure 15.Under normal conditions, the vector sumof the current in all phases equals theneutral current. Disregarding the effectsof the neutral sensor connection, theneutral current would flow through theGND element. Since this is normalneutral current, pickup of the GNDelement is not desired. Therefore, theneutral sensor is added to sense thesame neutral current as the GND sensor— but opposite in polarity. The result is acirculating current between the phasesensing current sensors and the neutralsensor, with no current flowing throughthe GND sensor. This is similar to adifferential relay circuit. When a phase-togroundfault occurs, the vector sum ofthe phase currents will no longer equalthe neutral current because the groundFigure 15. Schematic for Ground Protection on 4-Wire Systems, Residual Sensingfault current returns via the ground busand bypasses the neutral. If themagnitude of the phase-to-groundSelectioncurrent exceeds the pickup setting of theGND element for the required time, thetrip unit will operate to open the breaker.18TECHNICALTypes Of Coordinated Ground Fault Tripping SystemsThere are two types of CoordinatedGround Fault Systems:▪ Time / Current Selective▪ Zone Selective (Zone Interlock)Time / Current SelectiveIn this system the time / currentcharacteristics of the Ground FaultProtection (GFP) devices used with eachdisconnect are coordinated so that thenearest disconnect supplying the groundfault location will open. Any upstreamdisconnects remain closed and continueto supply the remaining load current. Eachset of GFP devices should have aspecified time-current operatingcharacteristic. When disconnects areconnected in series, each downstreamdevice should use a time-current settingthat will cause it to open and clear thecircuit before any upstream disconnecttripping mechanism is actuated. The timecurrentbands of disconnects in seriesmust not overlap and must be separatedfrom each other sufficiently to allow forthe clearing time of each disconnectingmeans used. The time / current selectivesystem is recommended for applicationswhere damage levels associated with thetime / current settings used are tolerable.This type of system does not requireinterlocking wiring between the GFPdevices associated with main feeder andbranch disconnecting devices.Figure 16, on the next page, illustratestime / current selective coordination in asystem involving a 4000 ampere maincircuit breaker and a 1600 ampere feedercircuit breaker in an incoming serviceswitchboard. These feed a distributionswitchboard with a 600 ampere subfeederto a 100 ampere branch breaker.The system is coordinated so that onlythe circuit breaker nearest the location ofthe ground fault trips.Zone Selective (Zone Interlock)In this system each disconnecting meansshould open as quickly as possible whena ground fault occurs in the zone wherethis disconnect is the nearest supplysource.The GFP device for an upstreamdisconnecting means should have at leasttwo modes of operation. If a ground faultoccurs between it and the nearestdownstream disconnect, it should operatein its fast tripping mode.When a ground fault occurs beyond thedownstream disconnect, the downstreamGFP device should open in its fasttripping mode and simultaneouslysend a restraining signal to the upstreamdevice and transfer that device to a timedelaytripping mode. The upstream timedelaytripping characteristic selectedshould be such that the downstreamdisconnect will open and clear the circuitbefore the upstream disconnect trippingmechanism is actuated. The time-currentcharacteristic of the upstream deviceshould be such as to offer backupprotection in the event of malfunction ofthe downstream equipment.Alternatively, a restraining signal from adownstream device may be used toprevent the tripping of an upstreamdisconnect on ground fault instead ofcausing it to operate in the time-delaytripping mode. This may be done wherebackup protection is less important thancontinuity of service to critical loadssupplied by the upstream unit. There arevery few instances in which this isjustified, and a careful study of the entiresystem should be made before using thistype of interlocking.For a zone selective system, the timecurrentbands of disconnects in series,although used only for backup protection,should not overlap and should beseparate from each other sufficiently toallow for the opening time of eachdisconnecting means used.18-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

TechnicalGround Fault ProtectionTime/Current Selective Ground CoordinationSelectionFigure 17. Zone Interlocking SchemeFigure 16. Fully Coordinated Multizone GFP SystemThe zone selective or zone interlocksystem provides fast tripping of thenearest disconnect upstream of theground fault. The damage level is thelowest that is possible because theground fault is cleared as quickly as theprotective equipment can respond andthe disconnect can open. Additionalinterlocking wiring and circuity forsending and receiving the restrainingsignals are required.The zone selective or zone interlockscheme is for those few specialapplications where exceptionally fasttripping is necessary for all feedersthroughout the entire system to reducedamage. Note that although the relaytime can be reduced appreciably, thecircuit breaker mechanism and arcingtime (plus safety margin) will still bepresent.Zone Selective Operation (Figure 17):a) Relay-1 will sense a ground fault atA when it exceeds 10 amperes. Itwill instantly initiate tripping of theBranch breaker and send restrainingsignals (transfer from instantaneousoperation to time-delayed operation)to Relay-2 and Relay-3 (Relay-2 andRelay-3 will then back up Relay-1 ona time coordinated basis). Relay-4will be restrained by Relay-2 ifground fault exceeds 100 amperes.b) Relay-2 will sense a ground fault atB when it exceeds 100 amperes. Itwill instantly initiate tripping of theSub-Feeder breaker and sendrestraining signals to Relay-3 andRelay-4.c) Relay-3 will sense a ground fault atC when it exceeds 400 amperes. Itwill instantly initiate tripping of theFeeder breaker and send arestraining signal to Relay-4.d) Relay-4 will sense a ground fault atD when it exceeds 800 amperes. Itwill instantly initiate tripping of theMain breaker.Table 17.1Typical AmpereSetting80040010010RestrainedTime Delay0.4 SEC.0.3 SEC.0.2 SEC.0.1 SEC.18 TECHNICALSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 18-9

TechnicalGround Fault ProtectionTypical Application DiagramsFigures 18 through 23 on this and thefacing page show the basic methods ofapplying ground fault protection (GFP).Other types of distribution systems willrequire variations of these methods tosatisfy other system conditions.These diagrams show circuit breakers asthe disconnects. Any disconnectingmeans can be utilized, providing it issuitable for use with a ground faultprotection system as indicated in thescope of this application guide. Theexamples do not show protection againsta ground fault on the supply side of themain disconnect.Sensing device and disconnect locationsdefine zones of protection. Source sideSelectionand ground return sensors provideprotection only on the load side of associateddisconnects. If a vector summationmethod is used and its sensors arelocated on load side of a disconnect, thezone between a source and actual sensorlocation becomes the responsibility ofthe next upstream protective device.Table 17.2 Recommendations for Figures 18-23GroundFaultProtection Figure Sensing MethodOn MainDisconnect OnlyOn Main andFeederDisconnectsOn Main, Feeder,and SelectedBranchDisconnects withZone SelectiveInterlockingDouble-EndedSystem withProtection onMain and On Tieand FeederDisconnects18 VectorSummation19Ground Return20212223Main and Feeders–Vector SummationMain – Ground ReturnFeeders – VectorSummationMain and feeders 1-3 –Vector SummationMCC branch feeder A –Zero SequenceMain and Tie – GroundReturnFeeders – VectorSummationAdditionalGroundPointsMust not be downstream.May be upstreamNoneMust not be downstream ofmain ground fault sensor.May be upstream.NoneMust not be downstream ofmain ground fault sensor.May be upstream.NoneRecommendedUseMinimum protection only perSection 230-95 for theNational Electric CodeImproved service continuityis requiredImproved service continuityand minimum arcing faultdamage are required andprotection is needed onbranch circuits.Double-ended systems withground fault protection ontie disconnect wheremaximum continuity ofservice is essential.SelectivityLimited selectivity dependson location of fault and ratingof overcurrent devices on theupstream side of fault.Main will allow feeder to tripfor faults downstream offeeder sensors, but main willtrip if feeder fails to operate.Main and feeder 1-3 willprovide delayed backupprotection if fault isdownstream of MCC branchfeeder A. Main will providedelayed backup protection iffault is downstream of sensorsfor feeders 1-3. Main will tripon fastest curve if fault isupstream of sensors forfeeders 1-3.When operating with tiedisconnect open, main willprovide delayed backupprotection if fault isdownstream from feedersensors. When operatingwith the tie disconnectclosed, the tie will trip beforethe main, thus sectionalizingthe bus.Ground Fault Protection on Main Disconnects OnlyTECHNICAL18Figure 18 Figure 1918-10Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

TechnicalGround Fault ProtectionGround Fault Protection on Main and Feeder DisconnectsSelectionFigure 20 Figure 21Ground Fault Protection on Main, Feeder and SelectedBranch Disconnects with Zone Selective InterlockingDouble-Ended System with Ground Fault Protection onMain and on Tie and Feeder DisconnectsFigure 22Figure 23Note: InterlockingSupplementary interlocking isrequired but will vary dependingon equipment used.18 TECHNICALSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 18-11

18TECHNICALTechnicalGround Fault ProtectionNEC Requirements for Ground FaultProtection230.95 Ground-Fault Protection ofEquipment. Ground-fault protection ofequipment shall be provided for solidlygrounded wye electrical services ofmore than 150 volts to ground but notexceeding 600 volts phase-to-phase foreach service disconnect rated 1000amperes or more. The groundedconductor for the solidly grounded wyesystem shall be connected directly toground without inserting any resistor orimpedance device.The rating of the service disconnect shallbe considered to be the rating of thelargest fuse that can be installed or thehighest continuous current trip settingfor which the actual overcurrent deviceinstalled in a circuit breaker is rated orcan be adjusted.Exception No. 1: The ground-faultprotection provisions of this section shallnot apply to a service disconnect for acontinuous industrial process where anonorderly shutdown will introduceadditional or increased hazards.Exception No. 2: The ground-faultprotection provisions of this section shallnot apply to fire pumps.(A) Setting. The ground-fault protectionsystem shall operate to cause theservice disconnect to open allungrounded conductors of the faultedcircuit. The maximum setting of theground-fault protection shall be 1200amperes, and the maximum time delayshall be one second for ground-faultcurrents equal to or greater than 3000amperes.(B) Fuses. If a switch and fusecombination is used, the fuses employedshall be capable of interrupting anycurrent higher than the interruptingcapacity of the switch during a time thatthe ground-fault protective system willnot cause the switch to open.(C) Performance Testing. The groundfaultprotection system shall beperformance tested when first installedon site. The test shall be conducted inaccordance with instructions that shallbe provided with the equipment. Awritten record of this test shall be madeand shall be available to the authorityhaving jurisdiction.(FPN No. 1): Ground-fault protection thatfunctions to open the service disconnectaffords no protection from faults on theline side of the protective element. Itserves only to limit damage toconductors and equipment on the loadside in the event of an arcing groundfault on the load side of the protectiveelement.(FPN No. 2): This added protectiveequipment at the service equipment maymake it necessary to review the overallwiring system for proper selectiveovercurrent protection coordination.Additional installations of ground-faultprotective equipment may be needed onfeeders and branch circuits wheremaximum continuity of electrical serviceis necessary.(FPN No. 3): Where ground-faultprotection is provided for the servicedisconnect and interconnection is madewith another supply system by a transferdevice, means or devices may beneeded to ensure proper ground-faultsensing by the ground-fault protectionequipment.(FPN No. 4): See 517.17(A) forinformation on where an additional stepof ground fault protection is required forhospitals and other buildings with criticalareas or life support equipment.517.17 Ground-Fault Protection.(A) Applicability. The requirements of517.17 shall apply to hospitals and otherbuildings (including multiple occupancybuildings) with critical care areas orutilizing electrical life support equipment,and buildings that provide the requiredessential utilities or services for theoperation of critial care areas or electricallife support equipment.Selection(B) Feeders. Where ground-faultprotection is provided for operation ofthe service disconnecting means orfeeder disconnecting means as specifiedby 230.95 or 215.10, an additional stepof ground-fault protection shall beprovided in all next level feederdisconnecting means downstreamtoward the load. Such protection shallconsist of overcurrent devices andcurrent transformers or other equivalentprotective equipment that shall causethe feeder disconnecting means to open.The additional levels of ground-faultprotection shall not be installed asfollows:(1) On the load side of an essentialelectrical system transfer switch(2) Between the on-site generatingunit(s) described in 517.35(B) andthe essential electrical systemtransfer switch(es)(3) On electrical systems that are notsolidly grounded wye systems withgreater than 150 volts to groundbut not exceeding 600 voltsphase-to-phase.(C) Selectivity. Ground-fault protectionfor operation of the service and feederdisconnecting means shall be fullyselective such that the feeder device,but not the service device, shall open onground faults on the load side of thefeeder device. A six-cycle minimumseparation between the service andfeeder ground-fault tripping bands shallbe provided. Operating time of thedisconnecting devices shall beconsidered in selecting the time spreadbetween these two bands to achieve100 percent selectivity.(FPN): See 230.95, fine print note, fortransfer of alternate source whereground-fault protection is applied.(D) Testing. When equipment groundfaultprotection is first installed, eachlevel shall be performance tested toensure compliance with 517.17(C).18-12Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

TechnicalOvercurrent Protection and CoordinationCoordination of a power distributionsystem requires that circuit protectivedevices be selected and set so thatelectrical disturbances, such as over-loadsor short circuits, will be cleared promptlyby isolating the faulted equipment withminimum service disruption of thedistribution system. Time / CurrentCharacteristic Curves are available forcircuit protective devices, such as circuitbreakers and fuses, which show howquickly they will operate at various valuesof overload and short circuit current.Coordination can be obtained bycomparing these curves for each device inseries in the system.In developing the system, it will be notedthat many compromises must be madebetween the various objectives:1. System reliability.2. Continuity of service.3. Equipment and system protection.4. Coordination of protective devices.5. System cost.Preliminary steps in Coordination study:A) One-line diagram: used as a base onwhich to record pertinent data andinformation regarding relays, circuitbreakers, fuses, current transformers, andoperating equipment while at the sametime, providing a convenientrepresentation of the relationship of circuitprotective devices with one another.B) Short-circuit study: record all applicableimpedances and ratings; using thesevalues, a short-circuit study is made todetermine currents available at anyparticular point in the system.C) Determine maximum load currentswhich will exist under normal operatingconditions in each of the power-systemcircuits, the transformer magnetizinginrush currents, and times, and thestarting currents, and accelerating times oflarge motors. These values will determinethe maximum currents which circuitprotective devices must carry withoutoperating. The upper boundary of currentsensitivity will be determined by thesmallest values resulting from thefollowing considerations:1) Maximum available short-circuitcurrent obtained by calculation.2) Requirements of applicable codesand standards for the protection ofequipment such as cable, motors,and transformers.3) Thermal and mechanical limitationsof equipment.D) Time / current characteristic curves ofall the protective devices to be coordinatedmust be obtained. These should beplotted on standard log-log coordinationpaper to facilitate the coordination study.Mechanics Of Achieving Coordination:The process of achieving coordinationamong protective devices in series isessentially one of selecting individual unitsto match particular circuit or equipmentprotection requirements, and of plottingthe time/current characteristic curves ofthese devices on a single overlay sheet oflog-log coordination paper.The achievement of coordination is a trialand-errorroutine in which the varioustime / current characteristic curves of theseries array of devices are matched oneagainst another on the graph plot.When selecting protective devices onemust recognize ANSI and NECrequirements and adhere to the limitingfactors of coordination such as loadcurrent, short-circuit current, and motorstarting. The protective devices selectedmust operate within these boundarieswhile providing selective coordinationFigure 24. Coordination of Example SystemSelectionwhere possible. Selective coordination isusually obtained in low voltage systemswhen the log-log plot of time / currentcharacteristics displays a clear spacebetween the characteristics of theprotective devices operating in series,that is, no overlap should exist betweenany two time/current characteristics iffull selective coordination is to beobtained. Allowance must be made forrelay overtravel and for relay and fusecurve accuracy. Quite often thecoordination study will stop at a pointshort of complete selective coordinationbecause a compromise must be madebetween the competing objectives ofmaximum protection and maximumservice continuity.Computer Aided Coordination:The philosophy discussed above appliesto the “classical” practice of performingcoordination studies manually. Today,however, there are numerous personalcomputer software programs availablefor performing coordination studies.18 TECHNICALSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 18-13

18TECHNICALTechnicalSystem AnalysisGeneralProper system design requires that thesystem be coordinated so the interruptingcapacity and / or short circuit withstandcapabilities of the various components inthe system are not exceeded for anyoperating situation. Good practice alsorequires that the system be selective, thatis, that the minimum portion of thesystem be interrupted on occurrence of afault. The need for selectivity must alwaysbe balanced against the requirements ofeconomics and coordination with theoverall process needs.At the conceptual phase of a project,several distribution system alternativesshould be considered, and examined bothtechnically and economically. This studyshould include sufficient detail for athorough understanding of the systemalternatives. The conceptual study shoulddetermine the optimal distribution systemconfiguration for the project, on whichdefinitive design can proceed.At all stages of design, the principalobjectives of personnel safety, equipmentprotection, process continuity, faultclearing, and service continuity should beconsidered.In designing a new or modifieddistribution system, the following types ofsystem studies may be needed:1. Short Circuit Studies: three phase,line-to-line, and line-to-ground faultscan be calculated for both close-andlatchand interrupting conditions,necessary for checking interruptingdevice and related equipment ratings,and setting protective devices.2. Circuit Breaker Application Studies:consider the AC and DC decrementsin the fault current, and the speed ofthe various medium voltage circuitbreakers, to determine close-and-latchand interrupting duties.3. Protective Device CoordinationStudies: determine characteristicsand settings of protective devices,e.g., relays, trip devices, fuses, etc.The coordination study should providea balance between protection ofsystem equipment and continuityof service.4. Load Flow Studies: calculate voltages,phase angles, real and reactivepower, line and transformer loadingsunder simulated conditions to aid indetermining the performance of anew or revamped system during theplanning stage.5. Motor Starting Studies: determineseverity of voltage dips and adequacyof load accelerating torque when startinglarge motors on a weak system.Today, most studies are performed usingcomputers. Some specialized studiesrequire large computing resources, butmany studies can now be performed onpersonal computers. A wide variety ofsoftware packages are available. Inaddition, many specialty firms exist whichprovide engineering service to performsuch studies.Short Circuit CalculationsThe single-line diagram serves as thestarting point for the system study andselection of equipment ratings. Thesingle-line must be modified to show allpower sources and capacities, andsystem impedances. Sources of shortcircuit current include utility connections,local generation, and all rotating machinesconnected to the system at the instantthe fault occurs. The system study shouldconsider various fault types (line-to-lineand line-to-ground) and fault locations.The value of normal load current in acircuit depends on the load connected,and is essentially independent of thecapacity of the power system. On theother hand, the short circuit currentdepends almost entirely on the capacityof the power system, not the size of theload.The total fault current consists of asymmetrical AC component,superimposed on a DC (offset)Selectioncomponent. Hence, the total fault currentis asymmetric with respect to the currentaxis. The value of the DC componentdepends on the point of the voltage waveat which the fault was initiated. Forsystem studies, it is assumed that thefault is initiated at the worst point, toproduce a “fully offset” fault current. Thisis illustrated in Figure 25.Short circuit currents are determined bythe system impedance, including bothreactance and resistance. The effect ofthe reactance is to cause the initial faultcurrent to be high, with the fault currentdeclining as time proceeds. This isrepresented as the summation of a DCcomponent which decays relativelyrapidly over time, and an AC component,which decays at a slower rate. The rate ofdecay of the components depends on thesystem X / R ratio.Since the reactance of rotating machinesvaries with the time from fault initiation,the short circuit calculations must use theappropriate machine reactance values.Subtransient reactance (X” d ) governscurrent flow for approximately the first 6cycles of a fault. Then, transientreactance (X’ d ) determines current flowup to around 30-120 cycles, depending onthe machine. After this, synchronousreactance (X d ) applies, but studiesseldom use this value as faults are notusually allowed to persist for this lengthof time.For transformers, the actual tested valueof the transformer impedance is used. Ifthis is not available, use designimpedance adjusted to the minimumvalue allowed by manufacturing toleranceof + – 7.5%. For example, a 5.75% designunit has a tolerance range of 5.32-6.18%,and 5.32% would be used in a systemstudy prior to manufacture.Figure 25. Structure of Asymmetrical Current Wave (Fully Offset)18-14Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

TechnicalCurrent Limiting Circuit Breaker TechnologyFuseless Current LimitingCircuit BreakersThe technology of Siemens Sentron ®fuseless current limiting circuit breakerswas developed to meet the demands ofmodern distribution systems. It isnot uncommon for today’s systems tohave prospective short circuit currentsapproaching 200,000 amperes. Usersdemanded the protection and flexibilityafforded by circuit breakers, withoutthe nuisance and expense of fusereplacement.Underwriters Laboratories, in UL489-2.4A, defines a fuseless current limitingcircuit breaker as one that “does notemploy a fusible element, and that whenoperating within its current-limiting range,limits the let-through l 2 t to a value lessthan the l 2 t of a half-cycle wave of thesymmetrical prospective current.”l 2 t is an expression which allowscomparison of the energy available as aresult of fault current flow. As used incurrent limiting discussions, l 2 t refers tothe energy released between the initiationof the fault current and the clearing of thecircuit.Figure 26 relates the “prospective l 2 t” tothe energy allowed by a Sentron currentlimiting circuit breaker, or “let-throughl 2 t”. The upper curve represents themaximum I 2 the circuit can produce,unaltered by the presence of anyprotective device. The lower curveillustrates the reduction in energyallowed when Sentron current limitingcircuit breakers are used.Figure 26. Reduction of l 2 t Let-Throughwith Current-Limiting TechnologyFigure 27. Current LimitationFigure 27 illustrates how the Sentroncircuit breaker limits the energy underfault conditions. The upper curveillustrates the first half-cycle wave ofprospective fault current. To qualify astruly current limiting, the circuit breakermust prevent the current value fromreaching the maximum value that itwould reach if the circuit breaker werenot connected in the circuit.SelectionThe Sentron circuit breakers use the“blow-apart” contact principle toaccomplish current limitation. Thisprinciple is based on the electro-magneticrepulsion of adjacent conductors whichcarry current in opposite directions.The contact arms are arranged to createopposing magnetic fields. As fault currentrises, magnetic repulsion forces thecontacts to separate completely. Thehigher the fault current, the faster this“blow-apart” action occurs.As figure 27 illustrates, the energy letthroughwith the current limiting Sentroncircuit breaker is decreased significantly.This provides better protection fordownstream equipment, and reducesdamage.Applications and RatingsSentron current limiting circuit breakersare designed for use in load centers,power panelboards, distributionswitchboards, secondary unitsubstations, and all types of individualenclosures where the available faultcurrents exceed the interrupting ratingsof heavy duty and extra-heavy dutymolded case circuit breakers.Sentron circuit breakers have ratings of15 through 1600 amperes, 240 through600 volts AC, with up to 200,000symmetrical amperes interrupting rating.18 TECHNICALSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 18-15

18TECHNICALTechnicalSeries-Connected Combination RatingsSeries-Connected RatingA series-connected rating can be assignedto a combination of components —typically circuit breakers — which hasbeen tested in combination to a higherinterrupting rating than that of the lowestrated protective device of thecombination. These ratings must besubstantiated by extensive UL testing.GeneralArticle 110.9 of the 2005 National ElectricCode states the following: “Equipmentintended to interrupt current at fault levelsshall have an interrupting rating sufficientfor the nominal circuit voltage and thecurrent that is available at the lineterminals of the equipment. Equipmentintended to interrupt current at other thanfault levels shall have an interrupting ratingat nominal circuit voltage sufficient for thecurrent that must be interrupted.”The difference between the phrases “atfault levels” and “at other than faultlevels” is the part of the Code whichmakes series-connected systemspossible. For example, the traditionalmethod of satisfying the Code was toselect each breaker in the series with aninterrupting rating equal to or greater thanthe prospective fault current. Theinterrupting rating of a circuit breaker —stated in RMS symmetrical amperes — isthe amount of short circuit current thedevice can safely interrupt and continue tofunction as a circuit breaker.Thus, if the prospective fault current at theline terminals of a panelboard is 100,000ARMS symmetrical, this traditional methodwould require that all the circuit breakerswithin the panelboard be rated at100,000A RMS symmetrical or greaterinterrupting capacity. This is illustrated inFigure 28. In the traditional system, boththe main and the feeder breaker aresubjected to several short circuit peaks.In a series-connected system, however,the individual components (or circuitbreakers) have already been tested inseries and the combination has beengiven an interrupting rating equal to orgreater than various prospective faultcurrents which are available. Thecombination, therefore, acts as a singleentity, and performs the same protectivefunction as individual circuit breakers inthe traditional method. The difference isthat combinations in series-connectedsystems contain devices with lowerinterrupting ratings.Siemens circuit breakers used in seriescombinations which have passedextensive tests required by UnderwritersLaboratories are listed in the ULRecognized Component Directoryaccording to manufacturer’s name andtype. The listing means that such circuitbreakers are UL Recognized for the seriesinterrupting ratings as noted in theDirectory, and that they can be used as anentity to meet Article 110.9 of the NEC.Using the previous example, if theprospective fault current at the lineterminals of the panelboard is 100,000amperes RMS symmetrical, the seriesconnectedmethod would involveselecting a specific combination from theUL Recognized Component Directory witha rating of 100,000 amperes RMSsymmetrical or greater interruptingcapacity. That combination might includeindividual components which have lowerindividual interrupting ratings than 100,000amperes RMS symmetrical.However, all the components in thecombination have been tested togetherand form an entity that will safety interruptthe prospective fault current of theparticular situation being examined as longas the interrupting rating listed matchesthe prospective fault current.SelectionWith the advent of fuseless currentlimiting circuit breakers such as Sentron,another important development in seriesconnectedcombinations has emerged.Because of the fuseless current limitingcircuit breaker’s extremely fast interruptingcapability, this device provides morecontrol over high prospective faultcurrents than traditional series-connectedsystems.The concept behind using fuseless currentlimiting circuit breakers as a component ina series-connected system is twofold: (1)higher interrupting ratings, and (2)increased control over peak current (i p ) andenergy let-through (I 2 t).For example, a current limiting circuitbreaker is placed at the side closest to thesource of power and rated according tothe prospective fault current available atthe line-side terminals. In effect, doing thisplaces a “shroud of protection” over thedownstream components. Because of theinherent high interrupting capability of thecurrent limiting circuit breaker, the breakeritself meets or exceeds the prospectiveshort circuit current. Because of its currentlimiting action the prospective I 2 t neverreaches downstream components. This isillustrated in Figure 29.It is important to recognize that thecurrent limiting circuit breaker be anindividual component in a UL testedcombination, and that it is the combinationitself — current limiting circuit breakerplus other circuit breakers — that formsentity specified in day-to-day applications.For specific series-connectedcombinations that have met ULrequirements and are listed in the ULRecognized Component Directory, checkwith your local Siemens sales office listedon the back cover. Since the Directory isupdated every six months, please checkfor additional combinations which mayhave been tested and approved.Figure 28 — Without Current LimitingFigure 29 — Series-Connected Protective Scheme With CurrentLimiting Main Circuit Breaker18-16Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

TechnicalHarmonics / K-factor RatingsNon-Linear LoadsWhen a sinusoidal voltage is applied to alinear load, the resultant currentwaveform takes on the shape of a sinewave as well. Typical linear loads areresistive heating and induction motors.In contrast, a non-linear load either:▪ Draws current during only part of thecycle and acts as an open circuit forthe balance of the cycle,or▪ Changes the impedance during thecycle, hence the resultant waveform isdistorted and no longer conforms to apure sine wave shapeIn recent years, the use of electronicequipment has mushroomed in bothoffices and industrial plants. Theseelectronic devices are powered byswitching power supplies or some typeof rectifier circuit. Examples of thesedevices used in offices are: computers,fax machines, copiers, printers, cashregisters, UPS systems, and solid-stateballasts. In industrial plants, one will findother electronic devices such as variablespeed drives, HID lighting, solid-statestarters and solid-state instruments. Theyall contribute to the distortion of thecurrent waveform and the generation ofharmonics. As the use of electronicequipment increases and it makes up alarger portion of the electrical load, manyconcerns are raised about its impact onthe electrical power supply system.SelectionVoltage of Current Waveform for Linear Loads (Sine Wave)Typical Current Waveform of Switching Power SupplyA Non-Linear Current and Its Fundamental, Plus 3rd and 5th Harmonic ComponentsHarmonicsAs defined by ANSI / IEEE Std. 519-1992,harmonic components are representedby a periodic wave or quantity having afrequency that is an integral multiple ofthe fundamental frequency. Harmonicsare voltages or currents at frequenciesthat are integer multiples of thefundamental (60 Hz) frequency: 120 Hz,180 Hz, 240 Hz, 300 Hz, etc. Harmonicsare designated by their harmonic number,or multiple of the fundamental frequency.Thus, a harmonic with a frequency of 180Hz (three times the 60 Hz fundamentalfrequency) is called the 3rd harmonic.Harmonics superimpose themselves onthe fundamental waveform, distorting itand changing its magnitude. For instance,when a sine wave voltage source isapplied to a non-linear load connectedfrom a phase-leg to neutral on a 3-phase,4-wire branch circuit, the load itself willdraw a current wave made up of the60 Hz fundamental frequency of thevoltage source, plus 3rd and higher orderodd harmonic (multiples of the 60 Hzfundamental frequency), which are allFigure 30 — Effect of Harmonics on Current Waveformgenerated by the non-linear load. TotalHarmonic Distortion (THD) is calculatedas the square root of the sum of thesquares of all harmonics divided by thenormal 60 Hz value.THD=IRMS(60 HZThis yields an RMS value of distortion asa percentage of the fundamental 60 Hzwaveform.(2IRMS(180 HZ2IRMS(60 HZ((2 2IRMSN((Therefore, it is the percentage amount ofodd harmonics (3rd, 5th, 7th ,..., 25th,...)present in the load which can affect thetransformer, and this condition is called a“Non-Linear Load” or “Non-SinusoidalLoad”. To determine what amount ofharmonic content is present, a K-Factorcalculation is made instead of using theTHD formula. The total amount ofharmonics will determine the percentageof non-linear load, which can be specifiedwith the appropriate K-Factor rating.18 TECHNICALSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 18-17

TechnicalHarmonics / K-factor RatingsSelection18TECHNICALTypical Symptoms of HarmonicProblems▪ Distribution / lighting transformersoverheating even when measured loadcurrent is within transformer rating▪ Neutral cable / bus overheating evenwith balanced load▪ Fuses blowing and circuit breakerstripping at currents within ratingEffect Of Harmonics On TransformersNon-sinusoidal current generates extralosses and heating of transformer coilsthus reducing efficiency and shorteningthe life expectancy of the transformer.Coil losses increase with the higherharmonic frequencies due to higher eddycurrent loss in the conductors.Furthermore, on a balanced linear powersystem, the phase currents are 120degrees out of phase and offset oneanother in the neutral conductor. But withthe “Triplen” harmonics (multiple of 3)the phase currents are in phase and theyare additive in this neutral conductor. Thismay cause installations with non-linearloads to double either the size or numberof neutral conductors.Table 17.5TypeK4K13K20K30LinearLoad100%100%100%100%K-Factor RatingsNon-LinearLoad50%100%125%150%Total K-FactorLoad Valve4.013.020.030.0Measurement of HarmonicsFor existing installations, the extent ofthe harmonics can be measured withappropriate instruments commonlyreferred to as “Power HarmonicAnalyzers”. This service is offered bymany consulting service organizations.For new construction, such informationmay not be obtainable. For suchsituations, it is best to assume the worsecase condition based on experience withthe type and mix of loads.Sizing Transformers for Non-LinearLoadsANSI / IEEE C57.110-1986 has aprocedure for de-rating standarddistribution transformers for non-linearloading. However this is not the onlyapproach. A transformer with theappropriate K-Factor specifically designedfor non-linear loads can be specified.K-FactorsK-Factor is a ratio between the additionallosses due to harmonics and the eddylosses at 60 Hz. It is used to specifytransformers for non-linear loads. Notethat K-Factor transformers do noteliminate harmonic distortion; theywithstand the non-linear load conditionwithout overheating.Calculating K-Factor Loads1. List the kVA value for each loadcategory to be supplied. Next, assign aK-factor designation that correspondsto the relative level of harmonicsdrawn by each type of load. Refer toTable 21.5.2. Multiply the kVA of each load or loadcategory times the Index of LoadK-rating (I LK ) that corresponds to theassigned K-factor rating. This result isan indexed kVA-I LK value.KVA x I LK = kVA-I LK .Table 17.7 Estimating K-Factor Loads DescriptionIncandescent LightingElectric Resistance HeatingMotors (without solid state drives)Control Transformers / Electromagnetic Control DevicesMotor-Generators (without solid state drives)Standard Distribution TransformersElectric Discharge Lighting (HID)UPS with Optional Input FilterWeldersInduction Heating EquipmentPLCs and Solid State ControlsTable 17.6K-FactorK1K4K9K13K20K30K40Telecommunications Equipment (PBX)UPS without Input FilteringMultiwire Receptacle Circuits in General Care Areas of Health Care Facilities,Schools, etc.Multiwire Receptacle Circuits Supplying Testing Equipment on an Assembly LineMain-Frame Computer LoadsSolid State Motor Drives (variable speed drives)Multiwire Receptacle Circuits in Critical Care Areas in HospitalsMultiwire Receptacle Circuits in Industrial, Medical and Educational LaboratoriesMultiwire Receptacle Circuits in Commercial Office SpacesSmall Main-Frames (mini and micro)Index of Load K-RatingsI LK0.025.8244.7257.7480.94123.54208.173. Tabulate the total connected load kVAfor all load categories to be supplied.4. Next, add-up the kVA-I LK values for allloads or load categories to be suppliedby the transformer.5. Divide the grand total kVA-I LK value bythe total kVA load to be supplied. Thiswill give an average I LK for that combinationof loads. Total kVA-I LK / TotalkVA = average I LK .6. From Table 21.6 find the K-factor ratingwhose I LK is equal to or greater thanthe calculated I LK .K-FactorK1K4K13K20I LK0.0025.8257.7480.94K30 123.54 Typical loads and K-Factor values for estimating purposes only.18-18Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

TechnicalTable 1Ampacities of Insulated Conductors (From NEC Table 310-16)Not More Than Three Conductors in Raceway or Cable or Earth (Directly Buried).(Based on Ambient Temperature of 30°C, 86°F)GeneralAluminum ConductorsCopper ConductorsCopper-Clad Aluminum Conductors60°C 75°C 90°C 60°C 75°C 90°CSize (140°F) (167°F) (194°F) (140°F) (167°F) (194°F) SizeTypes Types Types Types Types TypesTBSTBS,SASA, SIS,SISTHHNAWG RHW FEP RHW THHW AWGKcmil THW FEPB THHW THW-2, THWN-2, KcmilTHWN RHH THW RHH, RHW-2XHHW THHN THWN USE-2TW USE THHW TW XHHW XHH, XHHWUF ZW XHHW UF USE XHHW-2, ZW-20018 — — 014 — — — —0016 — — 018 — — — —0014 020 020 025 — — — —0012 025 025 030 020 020 025 120010 030 035 040 025 030 035 100008 040 050 055 030 040 045 80006 055 065 075 040 050 060 60004 070 085 095 055 065 075 40003 085 100 110 065 075 085 30002 095 115 130 075 090 100 20001 110 130 150 085 100 115 10000 1 ⁄0 125 150 170 100 120 135 0000 1 ⁄00000 2 ⁄0 145 175 195 115 135 150 0000 2 ⁄00000 3 ⁄0 165 200 225 130 155 175 0000 3 ⁄00000 4 ⁄0 195 230 260 150 180 205 0000 4 ⁄0250 215 255 290 170 205 230 250300 240 285 320 190 230 255 300350 260 310 350 210 250 280 350400 280 335 380 225 270 305 400500 320 380 430 260 310 350 500600 355 420 475 285 340 385 600700 385 460 520 310 375 420 700750 400 475 535 320 385 435 750800 410 490 555 330 395 450 800900 435 520 585 355 425 480 9001000 455 545 615 375 445 500 10001250 495 590 665 405 485 545 12501500 520 625 705 435 520 585 15001750 545 650 735 455 545 615 17502000 560 665 750 470 560 630 2000Table 2Correction Factors for Ambient Temperature Over 30°C, 86°FAmbient For ambient temperature over 30°C, (86°F) multiply the ampacities shown above by the appropriate factor AmbientTemperature°C shown below. Temperature°F21–25 1.08 1.05 1.04 1.08 1.05 1.04 70–7726–30 1.00 1.00 1.00 1.00 1.00 1.00 78–8631–35 .91 .94 .96 .91 .94 .96 87–9536–40 .82 .88 .91 .82 .88 .91 96–10441–45 .71 .82 .87 .71 .82 .87 105–11346–50 .58 .75 .82 .58 .75 .82 114–12251–55 .41 .67 .76 .41 .67 .76 123–13156–60 — 0.58 .71 — 0.58 .71 132–14061–70 — 0.33 .58 — 0.33 .58 141–15871–80 — — .41 — — .41 159–17618 TECHNICALThe load current rating and the overcurrent protectionfor conductor types shall not exceed 15 amperes for 14AWG, 20 amperes for 12 AWG, and 30 amperes for 10AWG copper; or 15 amperes for 12 AWG and 25 amperesfor 10 AWG aluminum and copper-clad aluminum afterany correction factors for ambient temperature andnumber of conductors have been applied.Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 18-19

18TECHNICALTechnicalTable 4AMotor Full-Load Currents of Three Motor Full-Load CurrentsPhase AC Induction Type Motors In Amperes, Single Phase, ACMotorHorsepower 115V 230VRatingCurrent in Amperes00 1 ⁄6 4.4 2.2Horsepower 208V 230V 460V 575V 00 1 ⁄4 5.8 2.9000 1 ⁄4 1.11 .96 .48 .38 00 1 ⁄3 7.2 3.600000 1 ⁄3 1.34 1.18 .59 .47⁄2 9.8 4.900 3 ⁄4 13.8 6.9000 1 ⁄2 2.4 2.2 1.1 .9 01 16 8000 3 ⁄4 3.5 3.2 1.6 1.3 01 1 ⁄2 20 10001 4.6 4.2 2.1 1.702 24 1203 34 17001 1 ⁄2 6.6 6 3 2.405 56 28002 7.5 6.8 3.4 2.7 07 1 ⁄2 80 40003 10.6 9.6 4.8 3.9 10 100 50005 16.7 15.2 7.6 6.1007 1 ⁄2 24.2 22.0 11.0 9.0010 30.8 28.0 14.0 11.0015 46.2 42.0 21.0 17.0020 59.4 54 27 22025 74.8 68 34 27030 88 80 40 32040 114 104 52 41050 143 130 65 52060 169 154 77 62075 211 192 96 77100 273 248 124 99125 343 312 156 125150 396 360 180 144200 528 480 240 192250 —0 —0 302 242300 —0 —0 361 289350 —0 —0 414 336400 —0 —0 477 382450 —0 —0 515 412500 —0 —0 590 472Values may vary depending on manufacturer,type of motor and NEMA design.For full load currents of 200 volt motors, increase thecorresponding 230 volt motor full-load current by15 percent.Table 5 Notes:1. Primary source available is assumed as 500 MVA at theprimary of the transformer with a source circuit X/Rratio of 12.2. Motor contribution is included in the table at twice thefull-load current for 208 volt transformers and at 4times the full-load current for 240 volt and 480 volttransformers. These values are derived from theassumption that 208 volt systems are 50% motor loadand 240 and 480 volt systems are 100% motor load.3. All short circuit current values are in symmetricalRMS amperes.Table 4BTable 4CMotor Full-Load CurrentsIn Amperes, DCHorsepower 120V 240V00 1 ⁄4 3.1 1.600 1 ⁄3 4.1 2.000 1 ⁄2 5.4 2.700 3 ⁄4 7.6 3.801 9.5 4.701 1 ⁄2 13.2 6.602 17 8.503 25 12.205 40 2007 1 ⁄2 58 2910 76 38Table 4DConversion Table of Polyphase Design B, C, D, and E Maximum Locked-RotorCurrents for Selection of Disconnecting Means and Controllers as Determinedfrom Horsepower and Voltage Rating and Design Letter For use only withSections 430-110, 440-12, 440-41, and 455-8(c) of the National Electric Code.Maximum Motor Locked-Rotor Current AmperesTwo and Three Phase Design B, C, D, and ERated 115 Volts 200 Volts 208 Volts 230 Volts 460 Volts 575 VoltsHP B, C, D E B, C, D E B, C, D E B, C, D E B, C, D E B, C, D E000 1 ⁄2 40 40 23 23 22.1 22.1 20 20 10 10 8 8000 3 ⁄4 50 50 28.8 28.8 27.6 27.6 25 25 12.5 12.5 10 10001 60 60 34.5 34.5 33 33 30 30 15 15 12 12001 1 ⁄2 80 80 46 46 44 44 40 40 20 20 16 16002 100 100 57.5 57.5 55 55 50 50 25 25 20 20003 —0 —0 73.6 84 71 81 64 73 32 36.5 25.6 29.2005 —0 —0 105.8 140 102 135 92 122 46 61 36.8 48.8007 1 ⁄2 —0 —0 146 210 140 202 127 183 63.5 91.5 50.8 73.2010 —0 —0 186.3 259 179 249 162 225 81 113 64.8 90015 —0 —0 267 388 257 373 232 337 116 169 93 135020 —0 —0 334 516 321 497 290 449 145 225 116 180025 —0 —0 420 646 404 621 365 562 183 281 146 225030 —0 —0 500 775 481 745 435 674 218 337 174 270040 —0 —0 667 948 641 911 580 824 290 412 232 330050 —0 —0 834 1185 802 1139 725 1030 363 515 290 412060 —0 —0 1001 1421 962 1367 870 1236 435 618 348 494075 —0 —0 1248 1777 1200 1708 1085 1545 543 773 434 618100 —0 —0 1668 2154 1603 2071 1450 1873 725 937 580 749125 —0 —0 2087 2692 2007 2589 1815 2341 908 1171 726 936150 —0 —0 2496 3230 2400 3106 2170 2809 1085 1405 868 1124200 —0 —0 3335 4307 3207 4141 2900 3745 1450 1873 1160 1498250 —0 —0 —00 —00 —00 —00 —00 —00 1825 2344 1460 1875300 —0 —0 —00 —00 —00 —00 —00 —00 2200 2809 1760 2247350 —0 —0 —00 —00 —00 —00 —00 —00 2550 3277 2040 2622400 —0 —0 —00 —00 —00 —00 —00 —00 2900 3745 2320 2996450 —0 —0 —00 —00 —00 —00 —00 —00 3250 4214 2600 3371500 —0 —0 —00 —00 —00 —00 —00 —00 3625 4682 2900 3746Table 5Normal-Load and Fault Currents of Three Phase TransformersGeneralTransformerCharacteristicsAC Voltage 3-Phase3-Phase 280V 240V 480VNormal Load Short Normal Load Short Normal Load ShortkVA % Continuous Circuit Continuous Circuit Continuous CircuitRating Impedance Amperes Current Amperes Current Amperes Current112.5 2.25 312 14,491 271 13,128 135 6,540150 3.00 416 14,699 361 13,477 180 6,720225 4.50 625 15,139 541 14,186 271 7,106300 5.00 834 18,326 722 17,328 361 8,664500 5.00 1388 30,536 1203 28,872 601 14,424750 5.75 2080 40,373 1804 38,590 902 19,2951000 5.75 2780 53,830 2406 51,467 1203 25,7341500 5.75 4162 80,745 3610 77,201 1805 38,5902000 5.75 —00 —000 4812 102,914 2406 51,4672500 5.75 —00 —000 6010 128,647 3008 64,3241000 8.00 —00 —000 —00 —0000 1203 19,8501500 8.00 —00 —000 —00 —0000 1805 29,76618-20Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

TechnicalTable 6Electrical Formulas for Finding Amperes, Horsepower, Kilowatts and kVAAlternating CurrentTo Find Single Phase Two Phase , Four Wire Three Phase Direct CurrentKilowattsI x E x pf I x E x 2 x pf I x E x 1.73 x pf I x E1000 1000 1000 1000kVAI x E I x E x 2 I x E x 1.731000 1000 1000Horsepower I x E x % EFF x pf I x E x 2 x % EFF x pf I x E x 1.73 x % EFF x pf I x E x % EFF(Output) 746 746 746 746Amperes whenHP x 746 HP x 746 HP x 746 HP x 746HorsepowerE x % EFF x pf 2 x E x % EFF x pf 1.73 x E x % EFF x pf E x % EFFis KnownAmperes whenKW x 1000 KW x 1000 KW x 1000 KW x 1000KilowattsE x pf 2 x E x pf 1.73 x E x pf Eis KnownAmperes when kVA x 1000 kVA x 1000 kVA x 1000kVA is Known E 2 x E 1.73 x EGeneralAverage Efficiency and Power FactorValues of MotorsWhen the actual efficiencies and powerfactors of the motors to be controlled arenot known, the following approximationsmay be used.Efficiencies:DC motors, 35 horsepowerand less 80% to 85%DC motors, above35 horsepower 85% to 90%Synchronous motors(at 100% power factor) 92% to 95%“Apparent” Efficiencies( = Efficiency x Power Factor);Three phase induction motors,25 horsepower and less 70%Three phase induction motorsabove 25 horsepower 80%These figures may be decreasedslightly for single phase and two phaseinduction motors.Table 7 Fault-Current Calculation on Low-Voltage AC SystemsIn order to determine the maximuminterrupting rate of the circuit breakers ina distribution system it is necessary tocalculate the current which could flowunder a three phase bolted short circuitcondition. For a three phase system themaximum available fault current at thesecondary side of the transformer can beobtained by use of the formula:I SC =kVA x 100KV x √3 x % Zwhere:I SC = Symmetrical RMS amperes offault current.kVA = Kilovolt-ampere rating oftransformers.KV = Secondary voltage in kilovolts.% Z = Percent impedance of primary lineand transformer.Table 5 on page 18-20 has been preparedto list the symmetrical RMS fault currentwhich is available at the secondaryterminals of the transformer.Grounding Electrode Conductor for AC Systems (From NEC Table 250–66)Size of Largest Service Entrance Conductor or Equivalent Area Size of Groundingfor Parallel ConductorsElectrode ConductorAluminum orAluminum or CopperCopper CladCopper Clad Aluminum Copper Aluminum2 or smaller 1/0 or smaller 8 61 or 1/0 2/0 or 3/0 6 42/0 or 3/0 4/0 or 250 kcmil 4 2Over 3/0 to 350 kcmil Over 250 kcmil to 500 kcmil 2 1/0Over 350 kcmil to 600 kcmil Over 500 kcmil to 900 kcmil 1/0 3/0Over 600 kcmil to 1100 kcmil Over 900 kcmil to 1750 kcmil 2/0 4/0Over 1100 kcmil Over 1750 kcmil 3/0 250 kcmilTable 8 Minimum Size Grounding Conductorsfor Grounding Raceways andEquipment (From NEC Table 250–122)Rating or Setting ofSizeAutomatic OvercurrentAluminum orDevice in Circuit AheadCopperof Equipment, Conduit Copper Cladetc., Not Exceeding Wire Aluminum(Amperes) Number Wire Number15 14 1220 12 1030 10 840 10 860 10 8100 8 6200 6 4300 4 2400 3 1500 2 1/0600 1 2/0800 1/0 3/01000 2/0 4/01200 3/0 250 kcmil1600 4/0 350 kcmil2000 250 kcmil 400 kcmil2500 350 kcmil 600 kcmil3000 400 kcmil 600 kcmil4000 500 kcmil 800 kcmil5000 700 kcmil 1200 kcmil6000 800 kcmil 1200 kcmilNote: Where necessary to comply with 250.4(A)(5) or(B)(4), the equipment grounding conductor shall be sizedlarger than given in this table.18 TECHNICALIn three wire, two phase circuits the current inthe common conductor is 1.41 times that in eitherother conductor.Additional information and exceptions are stated inArticle 250 — Grounding, National Electric Code.E = Volts I = Amperes% EFF = Per Cent Efficiency pf = Power FactorSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 18-21

18TECHNICALMolded Case Circuit BreakersUnusual Operating ConditionsHigh Ambient TemperaturesBecause standard thermal-magneticbreakers are temperature sensitive andcalibrated for a specific ambient of 40°C(104°F) (average enclosure temperature),the presence of an ambient higher willcause the breaker to carry less currentthan its name-plate rating — in otherwords, causing the breaker to “derate”(see Table 17.33). Similarly, the safecurrent carrying capacity of a circuitconductor is based upon an ambienttemperature of 30°C (86°F) (average airtemperature) and the presence of a higherambient will reduce its safe currentcarrying capacity, causing it to “derate.”Thus, it can be seen from Table 17.33 thatin the presence of a fluctuatingtemperature, a thermal-magnetic breakerwill derate nearly parallel with itsconnected circuit conductors and maintainclose circuit protection. If the applicationtemperature exceeds 40°C (104°F) and isknown, either a breaker especiallycalibrated for the higher ambients or oneoversized according to Table 17.33 may beselected. It should be noted that in a casesuch as this, the circuit conductors shouldbe oversized as well.Siemens Sensitrip ® III and Type SBEncased System Breakers are insensitiveto temperature changes. However, they doinclude circuitry to protect the componentsfrom abnormally high temperatures.Moisture — CorrosionFor atmospheres having high moisturecontent and I or where fungus growth isprevalent, a special preventive treatmentmay be required. Where the air is heavilyladen with corrosive elements, breakersmade with special corrosion-resistantfinishes are recommended.AltitudeReduced air density at altitudes greaterthan 6600 ft. (2000 meters) affects theability for a molded case circuit breaker totransfer heat and interrupt faults.Therefore, circuit breakers applied at thesealtitudes should have interrupting insulationand continuous currents derated asindicated in Table 17.34.Table 17.34 Altitude CorrectionApplicationNote: The information provided on this and the next page is intended for reference and recommendation only. Because severalvariables can act on a circuit breaker’s performance at the same time, the data below is based less on controlled testing, than onexperience and engineering judgment. Contact Siemens for further information on special conditions and treatment.Altitude in feet (meters)6600 (and below) (2000)8500 (2600)13000 (4000)RatingCorrection FactorContinuousCurrent10.990.96Voltage10.950.8Values for intermediate altitudes may be derived fromlinear interpolation. See Figure 1.Table 17.35Reference Relative Amperage Rating at:AmpereRating at40°C (104°F)25°C(77°F)50°C(122°F)60°C(140°F)15 17 13 1120 22 18 1625 28 23 2130 33 28 2635 39 30 2540 44 37 34 ED2Temperature Derating Data for Thermal-Magnetic Breakers50 55 46 4260 66 56 5270 77 65 6090 99 84 78100 110 94 87125 137 144 100150 165 136 120175 192 159 140200 220 182 160225 247 205 180250 275 235 220300 330 276 252350 385 325 301400 440 372 340500 550 468 435600 660 564 525700 770 658 613800 880 754 704900 990 828 7491000 1100 900 8251200 1320 1090 10001400 1540 1304 11481600 1760 1500 13201800 1980 1690 14852000 2200 1880 1650Figure 1 — Altitude Adjustment ChartSiemens Beaker TypesQJ2QJH2QJ2-HJXD2MXD6, MD6HMXD6HMD6CMD6ED4ED6HED4HED6CED6JXD6JD6HJD6HHJD6CJD6NXD6, ND6HNXD6HND6CND6FXD6FD6HFD6CFD6LXD6LD6HLD6HHLD6CLD6PXD6, PD6HPXD6, HPD6CPD6RXD6, RD6HRXD6, HRD618-22Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Molded Case Circuit BreakersUnusual Operating Conditions (400 Hz Systems )Circuit Breaker Derating RequiredTable 17.35 lists the maximum continuouscurrent carrying capacity for Siemensbreakers at 400 Hz. Due to the increasedresistance of the copper sections resultingfrom the skin effect produced by eddycurrents at these frequencies, circuitbreakers In many cases require derating.The thermal derating on these devices isbased upon 100%, three phase applicationin open air in a maximum of 40°C (104°F)with 48 in. (1219 mm) of the specifiedcable (75°C) of bus at the line and loadside. Additional derating of not less than20% will be required if the circuit breakeris to be utilized in an enclosure. Furtherderating may be required if the enclosurecontains other heat generating devices orif the ambient temperatures exceed 40°C(104°F).Cable and Bus SizingThe cable and bus sizes to be utilized at400 Hz are not based on standardTable 17.36SiemensBreakerTypeED2, ED4,ED6, HED4,HED6, CED6FD6, FXD4,HFD6, HFXD4,CFD6JXD2, JD6,JXD6, HJD6,HJXD6, HHJD6,HHJXD6, CJD6JD6, JXD6,HJD6, HJXD6,100% Rated400 Hz BreakersMaximum Continuous Ampere RatingAt 40°C (104°F) 75°C (167°F)Copper60 Hz 400 HzCable per PoleEnclosed No. of WireOpen Air Open Air After Derating Pieces Size15 15 12 1 pc. #1420 20 16 1 pc. #1225 25 20 1 pc. #1030 30 24 1 pc. #1035 35 28 1 pc. #1040 40 32 1 pc. #845 43 34 1 pc. #850 48 38 1 pc. #860 57 46 1 pc. #660 67 54 1 pc. #480 76 61 1 pc. #490 86 69 1 pc. #3100 95 76 1 pc. #3110 105 84 1 pc. #2125 119 95 1 pc. #170 63 50 1 pc. #480 72 58 1 pc. #490 80 64 1 pc. #3100 90 72 1 pc. #3110 95 75 1 pc. #2125 105 84 1 pc. #1150 125 100 1 pc. #1/0175 140 112 1 pc. #2/0200 160 128 1 pc. #3/0225 180 144 1 pc. #4/0250 200 160 1 pc. 250 kcmil200 170 136 1 pc. #3/0225 190 152 1 pc. #4/0250 210 168 1 pc. 250 kcmil300 240 192 1 pc. 350 kcmil350 260 208 1 pc. 500 kcmil400 300 240 2 pcs. #3/0200 170 170 2 pcs. #3/0225 190 190 2 pcs. #4/0250 210 210 1 pc. 250 kcmil300 240 240 1 pc. 350 kcmil350 260 260 1 pc. 500 kcmil400 300 300 2 pcs. #3/0National Electric Codes tables for 60 Hzapplication. Larger cross sections arenecessary at 400 Hz to avoid exceedingcomponent temperature limits. All busbars specified are based upon mountingthe bars in the vertical plane to allowmaximum air flow. All bus bars arespaced at a minimum of 0.25 in. (6 mm)apart. Mounting of bus bars in thehorizontal plane will necessitateadditional drafting. Edgewise orientationof the bus may change the maximumratings indicated. If additional informationis required for other connections of cableor bus, contact Siemens for information.Application RecommendationsIt is recommended that thermalindicating devices be placed on the lineand load terminals or T-connectors of thecenter pole. These are usually thehottest terminals with a balanced load. Amaximum temperature of 75°C (35°Cover a maximum ambient of 40°C) wouldSiemensBreakerTypeLD2, LXD6,HLD6, HLXD6,HHLD6,HHLXD6,CLD6LD6, LXD6,HLD6, HLXD6100% RatedMD6, MXD6,HMD6, HMXD6,CMD6MD6, MXD6,HMD6, HMXD6,CMD6100% RatedND6, NXD6,HND6, HNXD6,CND6ND6, NXD6,HND6, HNXD6,CND6PD6,PXD6,HPD6HPXD6, CPD6100% RatedPD6, PXD6,HPD6, HPXD6CPD6RD6, RXD6,HRD6, HRXD680% RatedApplicationverify the maximum rating for theparticular application. Temperatureprofiles taken on these breakers can becorrelated to ensure that the hottestpoints within the breaker are within therequired temperature limits.Factory ConfigurationsWhen required, molded case circuitbreakers may be factory calibrated for400 Hz application. These breakers arespecially labeled for 400 Hz usage andtheir nameplate current rating willinclude the necessary derating factor.The highest “Maximum ContinuousAmperes” rating at 400 Hz, found inTable 17.35 approximately equals thehighest specially calibrated 400 Hznameplate ampere rating available for agiven frame size. Contact Siemens forordering information on other breakersapplied in 400 Hz systems.Maximum Continuous Ampere RatingAt 40°C (104°F) 75°C (167°F)Copper60 Hz 400 HzCable per PoleEnclosed No. of WireOpen Air Open Air After Derating Pieces Size250 210 168 1 pc. 250 kcmil300 240 192 1 pc. 350 kcmil350 260 208 1 pc. 500 kcmil400 300 240 2 pcs. #3/0450 340 272 2 pcs. #4/0500 375 300 2 pcs. 250 kcmil600 420 3362 pcs. 350 kcmil250 210 210 1 pc. 250 kcmil300 240 240 1 pc. 350 kcmil350 260 260 1 pc. 500 kcmil400 300 3002 pcs. #3/0450 340 3402 pcs. #4/0500 375 3752 pcs. 250 kcmil600 420 4202 pcs. 350 kcmil500 400 3202 pcs. 250 kcmil600 430 3602 pcs. 350 kcmil700 500 4003 pcs. 250 kcmil800 560 4483 pcs. 300 kcmil500 400 4002 pcs. 250 kcmil600 430 4302 pcs. 350 kcmil700 500 5003 pcs. 250 kcmil800 560 5603 pcs. 300 kcmil800 560 4483 pcs. 300 kcmil900 600 4803 pcs. 350 kcmil1000 650 5203 pcs. 400 kcmil1200 780 624 4 pcs. 350 kcmil900 600 6003 pcs. 350 kcmil1000 650 6503 pcs. 400 kcmil1200 780 780 4 pcs. 350 kcmil1200 780 6244 pcs. 400 kcmil1400 850 680 4 pcs. 500 kcmil1600 960 7685 pcs. 500 kcmil1200 780 7804 pcs. 400 kcmil1400 850 8504 pcs. 500 kcmil1600 960 9605 pcs. 500 kcmil1600 960 7685 pcs. 500 kcmil1800 1080 8645 pcs. 500 kcmil2000 1200 9606 pcs. 500 kcmil The information provided on this page is intended for reference and recommendation only. Because several variables can act on a circuit breaker’s performance atthe same time,the data above is based less on controlled testing than on experience and engineering judgment. Contact Siemens for further information on special conditions and treatment. Additional derating may be required if the ambient temperature is greater than 40°C (104°F). Calculated after derating to compensate for the heating of the copper conductor, caused by the skin effect generated by eddy currents produced at 400/415 Hz.18 TECHNICALSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 18-23

18TECHNICALMolded Case Circuit BreakersCapacitor Circuit ConductorsArticle 460-8 (N.E.C.)The ampacity of capacitor circuitconductors shall not be less than 135%of the rated current of the capacitor. Theampacity of conductors that connect acapacitor to the terminals of a motor orto motor circuit conductors shall not beless than one-third the ampacity of themotor circuit conductors and in no caseless than 135% of the rated current ofthe capacitor.ApplicationCircuit breakers and switches for usewith capacitors must have a currentrating in excess of rated capacitor currentto provide for overcurrent fromovervoltages at fundamental frequencyand harmonic currents. Use the followingpercent of capacitor current rating to sizecircuit breaker or fused and non-fusedswitches.▪ Enclosed Circuit Breakers 150%(Includes derating factor for enclosure)▪ Fused and non-fused 165%switchesDue to switching surges, and possibleovercurrent related to overvoltage andharmonics, Siemens recommends using150% of the capacitor current rating tosize a thermal-magnetic circuit breakerfor overload protection.If the circuit breaker is to be applied in anambient greater than the marked ratedambient, it may be necessary to deratethe continuous current rating. This is alsotrue for applications where harmoniccomponents are present. A basic formulato use for calculation of the capacitorcurrent rating is as follows (assumingthree phase application):Capacitor (Kvar) x 1000(Voltage / 1.732) x 3The interrupting rating of the circuitbreaker or fuse must be selected tomatch the system fault current availableat the point of the capacitor application.Table 17.37CapacitorRatingAmperageVoltage K var RatingCapacitor240480Capacitor ApplicationEnclosedSwitchFuseRatingCapacitorRatingAmperageMCCBTripCapacitorRating Voltage K var RatingApplicationEnclosedSwitchFuseRatingMCCBTripRating2.5 6 15 15 480 125 150 250 2255 12 20 20 (cont’d)150 180 300 3007.5 18 30 30160 192 350 30010 24.1 40 40180 216 400 35015 36.1 60 60200 241 400 40020 48.1 80 8025 60 100 90225 271 500 50030 72.2 125 125 240 289 500 50045 108 200 175 250 301 500 50050 120 200 200 300 361 600 60060 144 250 225 320 385 700 60075 180 300 275 360 433 800 70090 217 400 350 375 451 800 700100 240 400 400 400 481 800 800120 289 500 450 450 541 900 900125 301 500 450 600 5 4.8 15 15135 325 600 500 7.5 7.2 15 15150 361 600 500 10 9.6 20 15180 433 800 700 15 14.4 25 30200 480 800 800 20 19.2 35 30225 541 900 900 25 24.1 40 40240 578 1000 900 30 28.9 50 50250 602 1000 900 35 33.7 60 50270 650 1200 1000 40 38.5 70 70300 720 1200 1200 45 43.3 80 70360 866 1600 1400 50 48.1 80 100375 903 1600 1400 60 57.7 100 1002 2.41 15 1575 72.2 125 1255 615 1580 77 150 1257.5 915 15100 96.2 175 15010 1220 20120 115 200 17515 1830 30125 120 200 20020 2440 40150 144 250 22525 3050 50 160 154 300 25030 36.1 60 50 180 173 300 30035 42.1 70 60 200 192 300 30040 48.1 80 70 225 217 400 35045 54.1 90 80 240 231 400 35050 60.1 100 100 250 241 400 40060 72.2 125 110 300 289 500 45075 90.2 150 150 320 308 600 50080 96.2 175 150 360 346 600 60090 108.3 200 175 375 361 600 600100 120.3 200 200 400 385 700 600120 144 250 225450 433 800 70018-24Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

TechnicalFraction, Decimal, and Millimeter EquivalentsFractions to Decimals to MillimetersFractions Decimals Millimeters1/64 0.015625 0.3971/32 0.03125 0.7943/64 0.046875 1.1911/16 0.0625 1.5885/64 0.078125 1.9843/32 0.09375 2.3817/64 0.109375 2.7781/8 0.1250 3.1759/64 0.140625 3.5725/32 0.15625 3.96911/64 0.171875 4.3663/16 0.1875 4.76313/64 0.203125 5.1597/32 0.21875 5.55615/64 0.234375 5.9531/4 0.2500 6.35017/64 0.265625 6.7479/32 0.28125 7.14419/64 0.296875 7.5415/16 0.3125 7.93821/64 0.328125 8.33411/32 0.34375 8.73123/64 0.359375 9.1283/8 0.3750 9.52525/64 0.390625 9.92213/32 0.40625 10.31927/64 0.421875 10.7167/16 0.4375 11.11329/64 0.453125 11.50915/32 0.46875 11.90631/64 0.484375 12.3031/2 0.500 12.70033/64 0.515625 13.09717/32 0.53125 13.49435/64 0.546875 13.8919/16 0.5625 14.28837/64 0.578125 14.68419/32 0.59375 15.08139/64 0.609375 15.4785/8 0.6250 15.87541/64 0.640625 16.27221/32 0.65625 16.66943/64 0.671875 17.06611/16 0.6875 17.46345/64 0.703125 17.85923/32 0.71875 18.25647/64 0.734375 18.6533/4 0.7500 19.05049/64 0.765625 19.44725/32 0.78125 19.84451/64 0.796875 20.24113/16 0.8125 20.63853/64 0.828125 21.03427/32 0.84375 21.43155/64 0.859375 21.8287/8 0.8750 22.22557/64 0.890625 22.62229/32 0.90625 23.01959/64 0.921875 23.41615/16 0.9375 23.81361/64 0.953125 24.20931/32 0.96875 24.60663/64 0.984375 25.0031 1.000 25.400Conversion TablesMillimeters to Inches Millimeters Inches Millimeters Inches0.1 0.0039 46 1.81100.2 0.0079 47 1.85040.3 0.0118 48 1.88980.4 0.0157 49 1.92910.5 0.0197 50 1.96850.6 0.0236 51 2.00790.7 0.0276 52 2.04720.8 0.0315 53 2.08660.9 0.0354 54 2.126055 2.16541 0.0394 56 2.20472 0.0787 57 2.24413 0.1181 58 2.28354 0.1575 59 2.32285 0.1969 60 2.36226 0.2362 61 2.40167 0.2756 62 2.44098 0.3150 63 2.48039 0.3543 64 2.519710 0.3937 65 2.559111 0.4331 66 2.598412 0.4724 67 2.637813 0.5118 68 2.677214 0.5512 69 2.716515 0.5906 70 2.755916 0.6299 71 2.795317 0.6693 72 2.834618 0.7087 73 2.874019 0.7480 74 2.913420 0.7874 75 2.952821 0.8268 76 2.992122 0.8661 77 3.031523 0.9055 78 3.070924 0.9449 79 3.110225 0.9843 80 3.149626 1.0236 81 3.189027 1.0630 82 3.228328 1.1024 83 3.267729 1.1417 84 3.307130 1.1811 85 3.346531 1.2205 86 3.385832 1.2598 87 3.425233 1.2992 88 3.464634 1.3386 89 3.503935 1.3780 90 3.543336 1.4173 91 3.582737 1.4567 92 3.622038 1.4961 93 3.661439 1.5354 94 3.700840 1.5748 95 3.740241 1.6142 96 3.779542 1.6535 97 3.818943 1.6929 98 3.858344 1.7323 99 3.897645 1.7717 100 3.937018 TECHNICAL0.001" = 0.0254 mm1 mm = 0.03937"Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 18-25

NOTESTECHNICAL1818-26Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory PageA01ED62 MCCB 6-36A01ED62B MCCB 6-36A01EDLV MCCB 6-36A01FD62 MCCB 6-39A01FD64 MCCB 6-39A01FDLV MCCB 6-39A01HCPL4 VBSS 4-22A01HCPR4 VBSS 4-22A01JLD64 MCCB 6-43A01JLD64 MCCB 6-47A01JLD64 MCCB 6-50A01JLD64B MCCB 6-43A01JLD64B MCCB 6-47A01JLD64B MCCB 6-50A01JLDLV MCCB 6-43A01JLDLV MCCB 6-47A01JLDLV MCCB 6-50A01MN64 MCCB 6-54A01MN64 MCCB 6-58A01MN64 MCCB 6-61A01MN64 MCCB 6-63A01MN64B MCCB 6-54A01MN64B MCCB 6-58A01MN64B MCCB 6-61A01MN64B MCCB 6-63A01MNDLV MCCB 6-54A01MNDLV MCCB 6-58A01MNDLV MCCB 6-61A01MNDLV MCCB 6-63A02ED62 MCCB 6-36A02ED62B MCCB 6-36A02FD62 MCCB 6-39A02FD64 MCCB 6-39A02JLD64 MCCB 6-43A02JLD64 MCCB 6-47A02JLD64 MCCB 6-50A02JLD64B MCCB 6-43A02JLD64B MCCB 6-47A02JLD64B MCCB 6-50A02JLDLV MCCB 6-43A02JLDLV MCCB 6-47A02JLDLV MCCB 6-50A02MN64 MCCB 6-54A02MN64 MCCB 6-58A02MN64 MCCB 6-61A02MN64 MCCB 6-63A02MN64B MCCB 6-54A02MN64B MCCB 6-58A02MN64B MCCB 6-61A02MN64B MCCB 6-63A02MNDLV MCCB 6-54A02MNDLV MCCB 6-58A02MNDLV MCCB 6-61A02MNDLV MCCB 6-63ACT331 BUSW 14-61AMBL1 MCCB 6-103AMBL1 MCCB 6-107AMBL1 MCCB 6-111AMBL1 MCCB 6-99AMBL2 MCCB 6-103AMBL2 MCCB 6-107AMBL2 MCCB 6-111AMBL2 MCCB 6-99AMBL3 MCCB 6-103AMBL3 MCCB 6-107AMBL3 MCCB 6-111AMBL3 MCCB 6-99AMBP1 MCCB 6-115AMBP1 MCCB 6-119AMBP1 MCCB 6-122AMBP2 6-115AMBP2 6-119AMBP2 6-122ASKE1 MCCB 6-25ASKE1 MCCB 6-33ASKE2 MCCB 6-25ASKE2 MCCB 6-33ASKE3 MCCB 6-25ASKE3 MCCB 6-33ASKE5 6-25ASKE5 6-33ASKE6 MCCB 6-25ASKE6 MCCB 6-33ASKL1 MCCB 6-103ASKL1 MCCB 6-107ASKL1 MCCB 6-111ASKL1 MCCB 6-99ASKL2 MCCB 6-103ASKL2 MCCB 6-107ASKL2 MCCB 6-111ASKL2 MCCB 6-99ASKL3 MCCB 6-103ASKL3 MCCB 6-107ASKL3 MCCB 6-111ASKL3 MCCB 6-99ASKP3 MCCB 6-115ASKP3 MCCB 6-119ASKP3 MCCB 6-122ASKP4 MCCB 6-115ASKP4 MCCB 6-119ASKP4 MCCB 6-122ASWPA MCCB 6-103ASWPA MCCB 6-107ASWPA MCCB 6-111ASWPA MCCB 6-115ASWPA MCCB 6-119ASWPA MCCB 6-122ASWPA MCCB 6-99ASWPB MCCB 6-103ASWPB MCCB 6-107ASWPB MCCB 6-111ASWPB MCCB 6-115ASWPB MCCB 6-119ASWPB MCCB 6-122ASWPB MCCB 6-99B00ED62 MCCB 6-36B00ED64 MCCB 6-36B00FD64 MCCB 6-39B00MN64 MCCB 6-54B00MN64 MCCB 6-58B00MN64 MCCB 6-61B00MN64 MCCB 6-63B01JLD64 MCCB 6-43B01JLD64 MCCB 6-47B01JLD64 MCCB 6-50B110 6-18B115 MCCB 6-18B115AF MCCB 6-19B115AFH MCCB 6-19B115H MCCB 6-18B115HH MCCB 6-18B115HID MCCB 6-20B115T 6-20B120 MCCB 6-18B120AF MCCB 6-19B120AFH MCCB 6-19B120H MCCB 6-18B120HH MCCB 6-18B120HID MCCB 6-20B120T MCCB 6-20B125 MCCB 6-18B125H MCCB 6-18B125HH MCCB 6-18B130 MCCB 6-18B130H MCCB 6-18B130HH MCCB 6-18B130HID MCCB 6-20B135 MCCB 6-18B135H MCCB 6-18B135HH MCCB 6-18B140 MCCB 6-18B140H MCCB 6-18B140HH MCCB 6-18B145 MCCB 6-18B145H MCCB 6-18B145HH MCCB 6-18B150 MCCB 6-18B150H MCCB 6-18B150HH MCCB 6-18B160 MCCB 6-18B160H MCCB 6-18B160HH MCCB 6-18B170 MCCB 6-18B170H MCCB 6-18B170HH 6-18B210 6-18B2100 MCCB 6-18B2100H MCCB 6-18B2100HH MCCB 6-18B2100HH MCCB 6-18B2100R MCCB 6-18B2110 MCCB 6-18B2110H MCCB 6-18B2125 MCCB 6-18B2125H MCCB 6-18B2125HH MCCB 6-18B215 MCCB 6-18B215AF MCCB 6-19B215AFH MCCB 6-19B215H MCCB 6-18B215HH MCCB 6-18B215HID MCCB 6-20B215R MCCB 6-18B220 MCCB 6-18B220AF MCCB 6-19B220AFH MCCB 6-19B220H MCCB 6-18B220HH MCCB 6-18B220HID MCCB 6-20B220R MCCB 6-18B225 MCCB 6-18B225H MCCB 6-18B225HH MCCB 6-18B230 MCCB 6-18B230H MCCB 6-18B230HH MCCB 6-18B230HID MCCB 6-20B230R MCCB 6-18B230S 6-20B235 MCCB 6-18B235H MCCB 6-18B235HH MCCB 6-18B240 MCCB 6-18B240H MCCB 6-18B240HH MCCB 6-18B240R MCCB 6-18B245 MCCB 6-18B245H MCCB 6-18B245HH 6-18B250 MCCB 6-18B250H MCCB 6-18B250HH MCCB 6-18B250R MCCB 6-18B260 MCCB 6-18B260H MCCB 6-18B260HH MCCB 6-18B260R MCCB 6-18B260S MCCB 6-20B270 MCCB 6-18B270H MCCB 6-18B270HH MCCB 6-18B270R MCCB 6-18B280 MCCB 6-18B280H MCCB 6-18B280HH MCCB 6-18B280R MCCB 6-18B290 MCCB 6-18B290H MCCB 6-18B290HH MCCB 6-18B290R MCCB 6-18B310 6-18B3100 MCCB 6-18B3100H MCCB 6-18B3100HH MCCB 6-18B315 MCCB 6-18B315H MCCB 6-18B315HH MCCB 6-18B32 UNPB 10-10B32 UNPB 10-10B32 UNPB 10-10B32 UNPB 10-10B32 UNPB 10-10B32 UNPB 10-10B320 MCCB 6-18B320H MCCB 6-18B320HH MCCB 6-18B325 MCCB 6-18B325H MCCB 6-18B325HH MCCB 6-18B330 MCCB 6-18B330H MCCB 6-18B330HH MCCB 6-18B335 MCCB 6-18B335H MCCB 6-18B335HH MCCB 6-18B340 MCCB 6-18B340H MCCB 6-18B340HH MCCB 6-18B345 MCCB 6-18B345H MCCB 6-18B345HH MCCB 6-18B350 MCCB 6-18B350H MCCB 6-18B350HH MCCB 6-18B360 MCCB 6-18B360H MCCB 6-18B360HH MCCB 6-18B370 MCCB 6-18B370H MCCB 6-18B370HH MCCB 6-18B38 UNPB 10-10B38 UNPB 10-10B38 UNPB 10-10B38 UNPB 10-10B38 UNPB 10-10B38 UNPB 10-10B380 MCCB 6-18B380H MCCB 6-18B380HH MCCB 6-18B390 MCCB 6-18B390H MCCB 6-18B390HH MCCB 6-18B44 UNPB 10-10B44 UNPB 10-10B44 UNPB 10-10B44 UNPB 10-10B44 UNPB 10-10B44 UNPB 10-10B56 UNPB 10-10B56 UNPB 10-10B56 UNPB 10-10B56 UNPB 10-10B56 UNPB 10-10B56 UNPB 10-10B62 UNPB 10-10B62 UNPB 10-10B62 UNPB 10-10B62 UNPB 10-10B62 UNPB 10-10B62 UNPB 10-10B68 UNPB 10-10B68 UNPB 10-10B68 UNPB 10-10B68 UNPB 10-10B68 UNPB 10-10B68 UNPB 10-10BBKB32 PBSB 10-31BBKB32 PBSB 10-42BBKEB32 PBSB 10-42BBKED32 PBSB 10-31BBKED32 PBSB 10-42BBKNB32 PBSB 10-31BBKNB32 PBSB 10-42BBKQ1 PBSB 10-31BBKQ2 PBSB 10-42BCT1036HND6 SWBD 12-24BCT1036NXD6 SWBD 12-24BCT1236HND6 SWBD 12-24BCT1236NXD6 SWBD 12-24BCT331 BUSW 14-61BCT436HJD6 SWBD 12-24BCT436JXD6 SWBD 12-24BCT636HLD6 SWBD 12-24BCT636LXD6 SWBD 12-24BCT836HMD6 SWBD 12-24BCT836MXD6 SWBD 12-24BDH10 BUSW 14-51BDH10 BUSW 14-51BDH10 BUSW 14-51BDH10 BUSW 14-51BDH10 BUSW 14-51BDH12 BUSW 14-51BDH12 BUSW 14-51BDH12 BUSW 14-51BDP302 BUSW 14-50BDP304 BUSW 14-50BDP306 BUSW 14-50BDP308 BUSW 14-50BDP310 BUSW 14-50BDP313 BUSW 14-50BDP316 BUSW 14-50BDP4024 BUSW 14-50BDP4044 BUSW 14-50BDP4064 BUSW 14-50BDP4084 BUSW 14-50BDP4104 BUSW 14-50BE1 RESG 2-81BE115 MCCB 6-19BE115H MCCB 6-19BE120 MCCB 6-19BE120H MCCB 6-19BE130 MCCB 6-19BE130H MCCB 6-19BE215 MCCB 6-19BE215H MCCB 6-19BE220 MCCB 6-19BE220H MCCB 6-19BE230 MCCB 6-19BE230H MCCB 6-19BE240 MCCB 6-19BE240H MCCB 6-19BE250 MCCB 6-19BE250H MCCB 6-19BE260 MCCB 6-19BE260H MCCB 6-19BE4 RESG 2-81BEC3100 BPLU 14-57BEC4100 BPLU 14-57BF115 MCCB 6-19BF115H MCCB 6-19BF120 MCCB 6-19BF120H MCCB 6-19BF125 MCCB 6-19BF125H 6-19BF130 MCCB 6-19BF130H MCCB 6-19BF215 MCCB 6-19BF215H MCCB 6-19BF220 MCCB 6-19BF220H MCCB 6-19BF230 MCCB 6-19BF230H MCCB 6-19BF240 MCCB 6-19BF240H MCCB 6-19BF250 MCCB 6-19BF250H MCCB 6-19BF260 MCCB 6-19BF260H MCCB 6-19BFC3250 BPLU 14-57BFC4250 BPLU 14-57BG215 MCCB 6-20BG220 MCCB 6-20BG230 MCCB 6-20BG315 MCCB 6-20BG320 MCCB 6-20BG330 MCCB 6-20BHP PILO 16-187BJC3400 BPLU 14-57BJC4400 14-57BK1 UNPB 10-11BK2 UNPB 10-11BK3 10-11BLC3600 BPLU 14-57BLC4600 14-57BMC3800 BPLU 14-57BMC4800 14-57BNK2 PBSB 10-31BOS14321 BPLU 14-57BOS14322 BPLU 14-57BOS14323 BPLU 14-57BOS14324 BPLU 14-57BOS14325 BPLU 14-57BOS14326 BPLU 14-57BOS14351 BPLU 14-57BOS14352 BPLU 14-57BOS14353 BPLU 14-57BOS14354 BPLU 14-57BOS14355 BPLU 14-57BOS14356 BPLU 14-57BOS16421 BPLU 14-57BOS16422 BPLU 14-57BOS16423 BPLU 14-57BOS16424 BPLU 14-57BOS16425 14-57BOS16426 14-57BOS16451 BPLU 14-57BOS16452 BPLU 14-57BOS16453 BPLU 14-57BOS16454 BPLU 14-57BOS16455 14-57BOS16456 BPLU 14-57BQ1B010 6-26BQ1B010QLD MCCB 6-27BQ1B010QXD 6-27BQ1B015 MCCB 6-26BQ1B015H MCCB 6-26BQ1B015QLD MCCB 6-27BQ1B015QXD MCCB 6-27BQ1B020 MCCB 6-26BQ1B020H MCCB 6-26BQ1B020QLD MCCB 6-27BQ1B020QXD MCCB 6-27BQ1B025 MCCB 6-26BQ1B025H MCCB 6-26BQ1B025QLD MCCB 6-27BQ1B025QXD MCCB 6-27BQ1B030 MCCB 6-26BQ1B030H MCCB 6-26BQ1B030QLD MCCB 6-27BQ1B030QXD MCCB 6-2719 PRODUCTINDEXSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 19-1

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory Page19PRODUCTINDEXBQ1B035 MCCB 6-26BQ1B035H 6-26BQ1B035QLD MCCB 6-27BQ1B035QXD MCCB 6-27BQ1B040 MCCB 6-26BQ1B040H MCCB 6-26BQ1B040QLD MCCB 6-27BQ1B040QXD MCCB 6-27BQ1B045 MCCB 6-26BQ1B045H 6-26BQ1B045QLD MCCB 6-27BQ1B045QXD 6-27BQ1B050 MCCB 6-26BQ1B050H MCCB 6-26BQ1B050QLD MCCB 6-27BQ1B050QXD MCCB 6-27BQ1B060 MCCB 6-26BQ1B060H MCCB 6-26BQ1B060QLD MCCB 6-27BQ1B060QXD MCCB 6-27BQ1B070 MCCB 6-26BQ1B070H MCCB 6-26BQ2B010 MCCB 6-26BQ2B010QLD MCCB 6-27BQ2B010QXD 6-27BQ2B015 MCCB 6-26BQ2B015H MCCB 6-26BQ2B015QLD MCCB 6-27BQ2B015QXD MCCB 6-27BQ2B020 MCCB 6-26BQ2B020H MCCB 6-26BQ2B020QLD MCCB 6-27BQ2B020QXD MCCB 6-27BQ2B025 MCCB 6-26BQ2B025H MCCB 6-26BQ2B025QLD MCCB 6-27BQ2B025QXD MCCB 6-27BQ2B030 MCCB 6-26BQ2B030H MCCB 6-26BQ2B030QLD MCCB 6-27BQ2B030QXD MCCB 6-27BQ2B035 MCCB 6-26BQ2B035H MCCB 6-26BQ2B035QLD MCCB 6-27BQ2B035QXD MCCB 6-27BQ2B040 MCCB 6-26BQ2B040H MCCB 6-26BQ2B040QLD MCCB 6-27BQ2B040QXD MCCB 6-27BQ2B045 MCCB 6-26BQ2B045H 6-26BQ2B045QLD MCCB 6-27BQ2B045QXD MCCB 6-27BQ2B050 MCCB 6-26BQ2B050H MCCB 6-26BQ2B050QLD MCCB 6-27BQ2B050QXD MCCB 6-27BQ2B060 MCCB 6-26BQ2B060H MCCB 6-26BQ2B060QLD MCCB 6-27BQ2B060QXD MCCB 6-27BQ2B070 MCCB 6-26BQ2B070H MCCB 6-26BQ2B080 MCCB 6-26BQ2B080H MCCB 6-26BQ2B090 MCCB 6-26BQ2B090H MCCB 6-26BQ2B100 MCCB 6-26BQ2B100H MCCB 6-26BQ2B110 MCCB 6-26BQ2B110H 6-26BQ2B125 MCCB 6-26BQ2B125H MCCB 6-26BQ2H015 MCCB 6-26BQ2H020 MCCB 6-26BQ2H030 MCCB 6-26BQ2H040 MCCB 6-26BQ2H050 MCCB 6-26BQ2H060 MCCB 6-26BQ2H070 MCCB 6-26BQ2H080 6-26BQ2H090 MCCB 6-26BQ2H100 MCCB 6-26BQ2S060 MCCB 6-72BQ2S100 MCCB 6-72BQ3B010 6-26BQ3B015 MCCB 6-26BQ3B015H MCCB 6-26BQ3B020 MCCB 6-26BQ3B020H MCCB 6-26BQ3B025 MCCB 6-26BQ3B025H MCCB 6-26BQ3B030 MCCB 6-26BQ3B030H MCCB 6-26BQ3B035 MCCB 6-26BQ3B035H MCCB 6-26BQ3B040 MCCB 6-26BQ3B040H MCCB 6-26BQ3B045 MCCB 6-26BQ3B045H MCCB 6-26BQ3B050 MCCB 6-26BQ3B050H MCCB 6-26BQ3B060 MCCB 6-26BQ3B060H MCCB 6-26BQ3B070 MCCB 6-26BQ3B070H MCCB 6-26BQ3B080 MCCB 6-26BQ3B080H MCCB 6-26BQ3B090 MCCB 6-26BQ3B090H MCCB 6-26BQ3B100 MCCB 6-26BQ3B100H MCCB 6-26BQ3S060 MCCB 6-72BQ3S100 MCCB 6-72BQD1100 MCCB 6-21BQD115 MCCB 6-21BQD120 MCCB 6-21BQD125 MCCB 6-21BQD130 MCCB 6-21BQD135 MCCB 6-21BQD140 MCCB 6-21BQD145 MCCB 6-21BQD150 MCCB 6-21BQD160 MCCB 6-21BQD170 MCCB 6-21BQD180 MCCB 6-21BQD190 MCCB 6-21BQD215 MCCB 6-21BQD220 MCCB 6-21BQD225 MCCB 6-21BQD230 MCCB 6-21BQD235 MCCB 6-21BQD240 MCCB 6-21BQD245 MCCB 6-21BQD250 MCCB 6-21BQD260 MCCB 6-21BQD270 MCCB 6-21BQD280 MCCB 6-21BQD290 MCCB 6-21BQD290 MCCB 6-21BQD3100 MCCB 6-21BQD315 MCCB 6-21BQD320 MCCB 6-21BQD325 MCCB 6-21BQD330 MCCB 6-21BQD335 MCCB 6-21BQD340 MCCB 6-21BQD345 MCCB 6-21BQD350 MCCB 6-21BQD360 MCCB 6-21BQD370 MCCB 6-21BQD380 MCCB 6-21BQD390 MCCB 6-21BQD6115 MCCB 6-21BQD6120 MCCB 6-21BQD6125 MCCB 6-21BQD6130 MCCB 6-21BQD6135 MCCB 6-21BQD6140 MCCB 6-21BQD6145 MCCB 6-21BQD6150 MCCB 6-21BQD6160 MCCB 6-21BQD6170 MCCB 6-21BQD6215 MCCB 6-21BQD6220 MCCB 6-21BQD6225 MCCB 6-21BQD6230 MCCB 6-21BQD6235 MCCB 6-21BQD6240 MCCB 6-21BQD6245 MCCB 6-21BQD6250 MCCB 6-21BQD6260 MCCB 6-21BQD6270 MCCB 6-21BQD6315 MCCB 6-21BQD6320 MCCB 6-21BQD6325 MCCB 6-21BQD6330 MCCB 6-21BQD6335 MCCB 6-21BQD6340 MCCB 6-21BQD6345 MCCB 6-21BQD6350 MCCB 6-21BQD6360 MCCB 6-21BQD6370 MCCB 6-21BQDA1 MCCB 6-21BQDA1BA MCCB 6-21BQDA2 MCCB 6-21BQDBA MCCB 6-21BQDHBD MCCB 6-86BQDPLD MCCB 6-86BQDST12 MCCB 6-21BQDST120 MCCB 6-21BQDST120AAS MCCB 6-21BQDST125 MCCB 6-21BQDST125DAS MCCB 6-21BQDST12DAS MCCB 6-21BQDST24 MCCB 6-21BQDST24 MCCB 6-21BQDST240 MCCB 6-21BQDST240AAS MCCB 6-21BQDST24AAS MCCB 6-21BQDST24DAS MCCB 6-21BQDST277 MCCB 6-21BQDST277AAS MCCB 6-21BQDST48 6-21BQDST480 MCCB 6-21BQDST480AAS MCCB 6-21BQDST48DAS MCCB 6-21BQDST600 6-21BQDST600AAS MCCB 6-21BQFS1K MCCB 6-27BQFS2 MCCB 6-27BR2 MCCB 6-87BR3 MCCB 6-87BR4 MCCB 6-87BZLF3 6-138BZLF3 6-138BZLFBDC 6-138BZLFBDC 6-138BZLFRHSE 6-138BZLFRHSE 6-138BZLL3 6-139BZLL3 6-139BZLLBDC 6-139BZLLBDC 6-139BZLLRHSE 6-139BZLLRHSE 6-139BZLM3 6-139BZLMBDC 6-139BZLMRHSE 6-139BZLP3 6-139BZLP3 6-139BZLPBDC 6-139BZLPBDC 6-139BZLPRHSE 6-139BZLPRHSE 6-139C01FD64 MCCB 6-39C1A18BL100CTS 10-67C1A18E4125CTS 10-67C1A18FX250CTS 10-67C1A18ML125CTS 10-67C1A18ML250CTS 10-67C1A18QJ225CTS 10-67C1A30BL100CTS 10-67C1A30E4125CTS 10-67C1A30FX250CTS 10-67C1A30ML125CTS 10-67C1A30ML250CTS 10-67C1A30QJ225CTS 10-67C1A42BL100CTS 10-67C1A42E4125CTS 10-67C1A42FX250CTS 10-67C1A42ML125CTS 10-67C1A42ML250CTS 10-67C1A42QJ225CTS 10-67C1C18BL100CTS 10-67C1C18E4125CTS 10-67C1C18FX250CTS 10-67C1C18ML125CTS 10-67C1C18ML250CTS 10-67C1C18QJ225CTS 10-67C1C30BL100CTS 10-67C1C30E4125CTS 10-67C1C30FX250CTS 10-67C1C30ML125CTS 10-67C1C30ML250CTS 10-67C1C30QJ225CTS 10-67C1C42BL100CTS 10-67C1C42E4125CTS 10-67C1C42FX250CTS 10-67C1C42ML125CTS 10-67C1C42ML250CTS 10-67C1C42QJ225CTS 10-67C2E18BD100CTS 10-67C2E18E4125CTS 10-67C2E18FX225CTS 10-67C2E18FX250CTS 10-67C2E18ML125CTS 10-67C2E18ML250CTS 10-67C2E30BD100CTS 10-67C2E30E4125CTS 10-67C2E30FX225CTS 10-67C2E30FX250CTS 10-67C2E30ML125CTS 10-67C2E30ML250CTS 10-67C2E42BD100CTS 10-67C2E42E4125CTS 10-67C2E42FX225CTS 10-67C2E42FX250CTS 10-67C2E42ML125CTS 10-67C2E42ML250CTS 10-67CBCF18 6-136CBCF18 6-136CBCM36 6-136CBCM36 6-136CBCM36 6-137CBCM36 6-137CBCM36 6-137CBCP54 6-136CBCP54 6-136CBCP54 6-137CBCP54 6-137CBCP54 6-137CBCP54 6-137CBCP54 6-137CBTF 6-136CBTF 6-136CBTL 6-137CBTL 6-137CBTM 6-137CBTP 6-137CBTP 6-137CCE125 MCCB 6-83CCF250 MCCB 6-37CCF250 MCCB 6-83CCL600 MCCB 6-40CCL600 MCCB 6-42CCL600 MCCB 6-44CCL600 MCCB 6-83CCM800K2 MCCB 6-83CCM800K3 MCCB 6-83CCN1200K2 MCCB 6-83CCN1200K3 MCCB 6-83CCQ225 MCCB 6-83CDT2B050 MCCB 6-97CDT2B060 MCCB 6-97CDT2B070 MCCB 6-97CDT2B080 MCCB 6-97CDT2B090 MCCB 6-97CDT2B100 MCCB 6-97CDT2B110 MCCB 6-97CDT2B125 MCCB 6-97CDT2B150 MCCB 6-97CDT3B050 MCCB 6-97CDT3B060 MCCB 6-97CDT3B070 MCCB 6-97CDT3B080 MCCB 6-97CDT3B090 MCCB 6-97CDT3B100 MCCB 6-97CDT3B110 MCCB 6-97CDT3B125 MCCB 6-97CDT3B150 MCCB 6-97CDT3D060 MCCB 6-98CDT3D100 MCCB 6-98CDT3D150 MCCB 6-98CDT3E060 MCCB 6-98CDT3E100 MCCB 6-98CDT3E150 MCCB 6-98CDT3N060 MCCB 6-98CDT3N100 MCCB 6-98CDT3N150 MCCB 6-98CDT3P060 MCCB 6-98CDT3P100 MCCB 6-98CDT3P150 MCCB 6-98CDT3U060 MCCB 6-98CDT3U100 MCCB 6-98CDT3U150 MCCB 6-98CDT3X060 MCCB 6-98CDT3X100 MCCB 6-98CDT3X150 MCCB 6-98CDT4B050 6-97CDT4B060 6-97CDT4B070 6-97CDT4B080 6-97CDT4B090 6-97CDT4B100 6-97CDT4B110 6-97CDT4B125 6-97CDT4B150 6-97CED62B015 MCCB 6-35CED62B020 MCCB 6-35CED62B030 MCCB 6-35CED62B040 MCCB 6-35CED62B050 MCCB 6-35CED62B060 MCCB 6-35CED62B070 MCCB 6-35CED62B080 MCCB 6-35CED62B090 MCCB 6-35CED62B100 MCCB 6-35CED62B125 MCCB 6-35CED62S100A MCCB 6-72CED62S125A MCCB 6-72CED63A001 MCCB 6-66CED63A001 MCCB 6-66CED63A003 MCCB 6-66CED63A005 MCCB 6-66CED63A010 MCCB 6-66CED63A025 MCCB 6-66CED63A030 MCCB 6-66CED63A040 MCCB 6-66CED63A050 MCCB 6-66CED63A100 MCCB 6-66CED63A125 MCCB 6-66CED63B015 MCCB 6-35CED63B020 MCCB 6-35CED63B030 MCCB 6-35CED63B040 MCCB 6-35CED63B050 MCCB 6-35CED63B060 MCCB 6-35CED63B070 MCCB 6-35CED63B080 MCCB 6-35CED63B090 MCCB 6-35CED63B100 MCCB 6-35CED63B110 MCCB 6-35CED63B125 MCCB 6-35CED63S100A MCCB 6-72CED63S125A MCCB 6-72CED6N12 5-13CED6N12 6-34CED6N1F 5-8CED6N1F 6-34CED6N1S 5-8CED6N1S 6-34CED6N3R MCCB 5-10CED6N3R MCCB 6-34CFD63A150 MCCB 6-66CFD63A250 MCCB 6-66CFD63B070 MCCB 6-38CFD63B080 MCCB 6-38CFD63B090 MCCB 6-38CFD63B100 MCCB 6-38CFD63B110 MCCB 6-38CFD63B125 MCCB 6-38CFD63B150 MCCB 6-38CFD63B175 MCCB 6-38CFD63B200 MCCB 6-38CFD63B225 MCCB 6-38CFD63B250 MCCB 6-38CFD63H150 MCCB 6-66CFD63L150 MCCB 6-66CFD63S250A MCCB 6-72CFS361C HDSS 4-14CFS361C5 HDSS 4-14CFS361J HDSS 4-14CFS361J5 HDSS 4-14CFS361JL HDSS 4-14CFS362J HDSS 4-14CFS362JL HDSS 4-14CFS363J HDSS 4-14CFS363JL HDSS 4-14CFS364J HDSS 4-14CFS365J HDSS 4-14CFSAUX1NC HDSS 4-15CFSAUX1NO HDSS 4-15CFSAUXH1 HDSS 4-15CFSAUXH2 HDSS 4-15CFSH10B12 HDSS 4-14CFSH10B12 HDSS 4-4CFSH10B4 HDSS 4-14CFSH10BL12 HDSS 4-14CFSH10BL4 HDSS 4-1419-2Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory PageCFSH10R12 HDSS 4-14CFSH10R12 HDSS 4-4CFSH10R4 HDSS 4-14CFSH10RL12 HDSS 4-14CFSH10RL4 HDSS 4-14CFSH5B12 HDSS 4-14CFSH5R12 HDSS 4-14CFSL100 HDSS 4-15CFSL200 HDSS 4-15CFSL400 HDSS 4-15CFSNFPA1 HDSS 4-15CFSNFPA2 HDSS 4-15CFSPLK HDSS 4-15CFSS10200H HDSS 4-14CFSS10400H HDSS 4-14CFSS5200 HDSS 4-14CFSS5200H HDSS 4-14CFSS5200H HDSS 4-4CFSS5400 HDSS 4-14CFSS5400H HDSS 4-14CFSS5400H HDSS 4-4CFSSB100 HDSS 4-15CFSSB200 HDSS 4-15CFSSB400 HDSS 4-15CFSSB60 HDSS 4-15CFSTS100 HDSS 4-15CFSTS200 HDSS 4-15CFSTS400 HDSS 4-15CFT2B100 MCCB 6-101CFT2B110 MCCB 6-101CFT2B125 MCCB 6-101CFT2B150 MCCB 6-101CFT2B175 MCCB 6-101CFT2B200 MCCB 6-101CFT2B225 MCCB 6-101CFT2B250 MCCB 6-101CFT3B100 MCCB 6-101CFT3B110 MCCB 6-101CFT3B125 MCCB 6-101CFT3B150 MCCB 6-101CFT3B175 MCCB 6-101CFT3B200 MCCB 6-101CFT3B225 MCCB 6-101CFT3B250 MCCB 6-101CFT3D100 MCCB 6-102CFT3D150 MCCB 6-102CFT3D250 MCCB 6-102CFT3E100 MCCB 6-102CFT3E150 MCCB 6-102CFT3E250 MCCB 6-102CFT3N100 MCCB 6-102CFT3N150 MCCB 6-102CFT3N250 MCCB 6-102CFT3P100 MCCB 6-102CFT3P150 MCCB 6-102CFT3P250 MCCB 6-102CFT3U100 MCCB 6-102CFT3U150 MCCB 6-102CFT3U250 MCCB 6-102CFT3X100 MCCB 6-102CFT3X150 MCCB 6-102CFT3X250 MCCB 6-102CFT4B100 6-101CFT4B110 6-101CFT4B125 6-101CFT4B150 6-101CFT4B175 6-101CFT4B200 6-101CFT4B225 6-101CFT4B250 6-101CJD62H400 MCCB 6-66CJD62L400 MCCB 6-66CJD63B200 MCCB 6-41CJD63B225 MCCB 6-41CJD63B250 MCCB 6-41CJD63B300 MCCB 6-41CJD63B350 MCCB 6-41CJD63B400 MCCB 6-41CJD63H400 MCCB 6-66CJD63L400 MCCB 6-66CJD63S400A MCCB 6-72CJT2B250 MCCB 6-105CJT2B300 MCCB 6-105CJT2B350 MCCB 6-105CJT2B400 MCCB 6-105CJT3B250 MCCB 6-105CJT3B300 MCCB 6-105CJT3B350 MCCB 6-105CJT3B400 MCCB 6-105CJT3D250 MCCB 6-106CJT3D400 MCCB 6-106CJT3E250 MCCB 6-106CJT3E400 MCCB 6-106CJT3N250 MCCB 6-106CJT3N400 MCCB 6-106CJT3P250 MCCB 6-106CJT3P400 MCCB 6-106CJT3U250 MCCB 6-106CJT3U400 MCCB 6-106CJT3X250 MCCB 6-106CJT3X400 MCCB 6-106CJT4B250 6-105CJT4B300 6-105CJT4B350 6-105CJT4B400 6-105CLD62H600 MCCB 6-66CLD62L600 MCCB 6-66CLD63B450 MCCB 6-45CLD63B500 MCCB 6-45CLD63B600 MCCB 6-45CLD63H600 MCCB 6-66CLD63L600 MCCB 6-66CLD63S600A MCCB 6-72CLKF MCCB 6-130CLKP MCCB 6-131CLKP MCCB 6-131CLKP MCCB 6-131CLM 16-158CLM 16-159CLM NEMA 16-72CLM NEMA 16-73CLRSJL3 MCCB 6-91CLT2B400 MCCB 6-109CLT2B500 MCCB 6-109CLT2B600 MCCB 6-109CLT3B400 MCCB 6-109CLT3B500 MCCB 6-109CLT3B600 MCCB 6-109CLT3D400 MCCB 6-110CLT3D600 MCCB 6-110CLT3E400 MCCB 6-110CLT3E600 MCCB 6-110CLT3N400 MCCB 6-110CLT3N600 MCCB 6-110CLT3P400 MCCB 6-110CLT3P600 MCCB 6-110CLT3U400 MCCB 6-110CLT3U600 MCCB 6-110CLT3X400 MCCB 6-110CLT3X600 MCCB 6-110CMD63A800 MCCB 6-66CMD63B500 MCCB 6-52CMD63B600 MCCB 6-52CMD63B700 MCCB 6-52CMD63B800 MCCB 6-52CMD63H800 MCCB 6-66CMD63L800 MCCB 6-66CMD63S800A MCCB 6-72CMT2B600 6-113CMT2B700 6-113CMT2B800 6-113CMT3B600 6-113CMT3B700 6-113CMT3B800 MCCB 6-113CMT3D600 6-114CMT3D800 6-114CMT3E600 6-114CMT3E800 6-114CMT3N600 6-114CMT3N800 6-114CMT3P600 6-114CMT3P800 6-114CMT3U600 6-114CMT3U800 6-114CMT3X600 6-114CMT3X800 6-114CMT4N600 6-114CMT4N800 6-114CMT4P600 6-114CMT4P800 6-114CMT4U600 6-114CMT4U800 6-114CMT4X600 6-114CMT4X800 6-114CND63B100 MCCB 6-56CND63B120 MCCB 6-56CND63B900 MCCB 6-56CND63S120A MCCB 6-72CNFS361 HDSS 4-14CNLK18 UNPB 10-11CNLK30 UNPB 10-11CNLK42 UNPB 10-11CNT2B100 6-117CNT2B120 6-117CNT2B800 6-117CNT2B900 6-117CNT3B100 MCCB 6-117CNT3B120 MCCB 6-117CNT3B800 6-117CNT3B900 6-117CNT3D100 6-118CNT3D120 6-118CNT3D800 6-118CNT3E100 6-118CNT3E120 6-118CNT3E800 6-118CNT3N100 6-118CNT3N120 6-118CNT3N800 6-118CNT3P100 6-118CNT3P120 6-118CNT3P800 6-118CNT3U100 6-118CNT3U120 6-118CNT3U800 6-118CNT3X100 6-118CNT3X120 6-118CNT3X800 6-118CNT4N100 6-118CNT4N120 6-118CNT4N800 6-118CNT4P100 6-118CNT4P120 6-118CNT4P800 6-118CNT4U100 6-118CNT4U120 6-118CNT4U800 6-118CNT4X100 6-118CNT4X120 6-118CNT4X800 6-118COMEXT 6-138COMEXT 6-138COMEXT 6-139COMEXT 6-139COMEXT 6-139COMEXT 6-139COMEXT 6-139COMKIT1 6-138COMKIT1 6-138COMKIT1 6-139COMKIT1 6-139COMKIT2 6-139COMKIT2 6-139COMKIT2 6-139COMMOD 6-138COMMOD 6-138COMMOD 6-139COMMOD 6-139COMMOD 6-139COMMOD 6-139COMMOD 6-139COMP232 6-138COMP232 6-138COMP232 6-139COMP232 6-139COMP232 6-139COMP232 6-139COMP232 6-139COMPCA 6-138COMPCA 6-138COMPCA 6-139COMPCA 6-139COMPCA 6-139COMPCA 6-139COMPCA 6-139COMPRO 6-138COMPRO 6-138COMPRO 6-139COMPRO 6-139COMPRO 6-139COMPRO 6-139COMPRO 6-139COMPS 6-138COMPS 6-138COMPS 6-139COMPS 6-139COMPS 6-139COMPS 6-139COMPS 6-139CPD63B120 MCCB 6-59CPD63B140 MCCB 6-59CPD63B160 MCCB 6-59CPT3B120 6-120CPT3B140 6-120CPT3B160 6-120CPT3D120 6-121CPT3D160 6-121CPT3E120 6-121CPT3E160 6-121CPT3N120 6-121CPT3N160 6-121CPT3P120 6-121CPT3P160 6-121CPT3U120 6-121CPT3U160 6-121CPT3X120 6-121CPT3X160 6-121CPT4N120 6-121CPT4N160 6-121CPT4P120 6-121CPT4P160 6-121CPT4U120 6-121CPT4U160 6-121CPT4X120 6-121CPT4X160 6-121CQD1100 MCCB 6-29CQD115 MCCB 6-29CQD120 MCCB 6-29CQD125 MCCB 6-29CQD130 MCCB 6-29CQD135 MCCB 6-29CQD140 MCCB 6-29CQD145 MCCB 6-29CQD150 MCCB 6-29CQD160 MCCB 6-29CQD170 MCCB 6-29CQD180 MCCB 6-29CQD190 MCCB 6-29CQD2100 MCCB 6-29CQD215 MCCB 6-29CQD220 MCCB 6-29CQD225 MCCB 6-29CQD230 MCCB 6-29CQD235 MCCB 6-29CQD240 MCCB 6-29CQD245 MCCB 6-29CQD250 MCCB 6-29CQD260 MCCB 6-29CQD270 MCCB 6-29CQD280 MCCB 6-29CQD290 MCCB 6-29CQD3100 MCCB 6-29CQD315 MCCB 6-29CQD320 MCCB 6-29CQD325 MCCB 6-29CQD330 MCCB 6-29CQD335 MCCB 6-29CQD340 MCCB 6-29CQD345 MCCB 6-29CQD350 MCCB 6-29CQD360 MCCB 6-29CQD370 MCCB 6-29CQD380 MCCB 6-29CQD390 MCCB 6-29CQD6120 MCCB 6-29CQD6125 MCCB 6-29CQD6130 MCCB 6-29CQD6135 MCCB 6-29CQD6140 MCCB 6-29CQD6145 MCCB 6-29CQD6150 MCCB 6-29CQD6160 MCCB 6-29CQD6170 MCCB 6-29CQD6215 MCCB 6-29CQD6220 MCCB 6-29CQD6225 MCCB 6-29CQD6230 MCCB 6-29CQD6235 MCCB 6-29CQD6240 MCCB 6-29CQD6245 MCCB 6-29CQD6250 MCCB 6-29CQD6260 MCCB 6-29CQD6270 MCCB 6-29CQD6315 MCCB 6-29CQD6320 MCCB 6-29CQD6325 MCCB 6-29CQD6330 MCCB 6-29CQD6335 MCCB 6-29CQD6340 MCCB 6-29CQD6345 MCCB 6-29CQD6350 MCCB 6-29CQD6360 MCCB 6-29CQDA1 MCCB 6-23CQDA1 MCCB 6-31CQDA1BA MCCB 6-23CQDA1BA MCCB 6-31CQDA2 MCCB 6-23CQDA2 MCCB 6-31CQDBA MCCB 6-23CQDBA MCCB 6-31CQDFMB1 MCCB 6-87CQDFMB2 MCCB 6-87CQDFMB3 MCCB 6-87CQDOP MCCB 6-88CQDOP34 MCCB 6-88CQDSMK MCCB 6-87CQDST12 MCCB 6-23CQDST12 MCCB 6-31CQDST120 MCCB 6-23CQDST120 MCCB 6-31CQDST120AAS MCCB 6-23CQDST120AAS MCCB 6-31CQDST125 MCCB 6-23CQDST125 MCCB 6-31CQDST125DAS MCCB 6-23CQDST125DAS MCCB 6-31CQDST12DAS MCCB 6-23CQDST12DAS MCCB 6-31CQDST24 MCCB 6-23CQDST24 MCCB 6-31CQDST240 MCCB 6-23CQDST240 MCCB 6-31CQDST240AAS MCCB 6-23CQDST240AAS MCCB 6-31CQDST24AAS 6-23CQDST24AAS 6-31CQDST24DAS MCCB 6-23CQDST24DAS MCCB 6-31CQDST277 MCCB 6-23CQDST277 MCCB 6-31CQDST277AAS MCCB 6-23CQDST277AAS MCCB 6-31CQDST48 MCCB 6-23CQDST48 MCCB 6-31CQDST480 MCCB 6-23CQDST480 MCCB 6-31CQDST480AAS MCCB 6-23CQDST480AAS MCCB 6-31CQDST48DAS MCCB 6-23CQDST48DAS MCCB 6-31CQDST600 MCCB 6-23CQDST600 MCCB 6-31CQDST600AAS MCCB 6-23CQDST600AAS MCCB 6-31CRHOESD MCCB 6-88CRHOFSD MCCB 6-88CRHOH MCCB 4-12CRHOH MCCB 4-12CRHOH MCCB 4-12CRHOH MCCB 4-12CRHOH MCCB 6-88CRHOJSD MCCB 6-88CRHOLMSD MCCB 6-88CRHOS06VD 4-12CRHOS06VD 4-12CRHOS06VD 4-12CRHOS20VD 4-12CSAPELTU 6-138CSAPELTU 6-138CSAPELTU 6-139CSAPELTU 6-139CSAPELTU 6-139CSAPELTU 6-139CSAPELTU 6-139CTB302 BUSW 14-51CTB304 BUSW 14-51CTB306 BUSW 14-51CTB308 BUSW 14-51CTB310 BUSW 14-51CTB313 BUSW 14-51CTB316 BUSW 14-51CTB4024 BUSW 14-51CTB4044 BUSW 14-51CTB4064 BUSW 14-51CTB4084 BUSW 14-51CTB4104 BUSW 14-51CTI2040L1200CU RESI 1-16CTI2440L1200CU RESI 1-16CTI3040L1200CU RESI 1-16D115 RESI 1-2819 PRODUCTINDEXSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 19-3

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory Page19PRODUCTINDEXD11CEU1 MCCB 6-88D11CEU2 MCCB 6-88D11CFU1 MCCB 6-88D11CFU2 MCCB 6-88D11CJU2 MCCB 6-88D120 RESI 1-28D130 1-28D140 RESI 1-28D150 RESI 1-28D160 1-28D215 RESI 1-28D220 RESI 1-28D230 RESI 1-28D240 RESI 1-28D250 RESI 1-28D260 RESI 1-28DCADFC3 6-130DCADRC3 6-130DCAFFC3 6-130DCAFRC3 6-130DCAJFC3 6-131DCAJRC3 6-131DCALFC3 6-131DCALRC3 6-131DCAMFC3 6-131DCAMRC3 6-131DCAPFC3 6-131DCAPFC3 6-131DCAPRC3 6-131DCAPRC3 6-131DCHP 6-130DCHP 6-130DCHP 6-131DCHP 6-131DCHP 6-131DCHP 6-131DCHP 6-131DCIP 6-130DCIP 6-130DCIP 6-131DCIP 6-131DCIP 6-131DCIP 6-131DCIP 6-131DCXD3 6-130DCXF3 6-130DCXJ3 6-131DCXL3 6-131DCXM3 6-131DCXN3 6-131DCXP3 6-131DFFP3 PBSB 10-31DFFP3 PBSB 10-42DFFP6 PBSB 10-31DFFP6 PBSB 10-42DFK1 PBSB 10-31DKL2 MCCB 6-88DKL3 MCCB 6-88DKR2 MCCB 4-8DKR2 MCCB 6-88DKR3 MCCB 4-8DKR3 MCCB 6-88DS100GK HDSS 3-30DS200EK1 HDSS 3-30DS200EK2 HDSS 3-30DS200GK HDSS 3-30DS468GK HDSS 3-30DS800NK HDSS 3-30DT ( ) 007 7-12DT ( ) 011 7-12DT ( ) 015 7-12DT ( ) 020 7-12DT ( ) 027 7-12DT ( ) 034 7-12DT ( ) 040 7-12DT ( ) 051 7-12DT ( ) 063 7-12DT ( ) 075 7-12DT ( ) 093 7-12DT ( ) 118 7-12DT ( ) 145 7-12DT ( ) 175 7-12DT ( ) 220 7-12DT ( ) 275 7-12DT ( ) 330 7-12DT ( ) 440 7-12DT ( ) 550 7-12DT ( ) 660 7-12DT100NK HDSS 3-30DT200NK HDSS 3-30DT600NK HDSS 3-30DTF224 HDSS 3-29DTF224R HDSS 3-29DTF321 HDSS 3-29DTF321R HDSS 3-29DTF322 HDSS 3-29DTF322R HDSS 3-29DTF323 HDSS 3-29DTF323R HDSS 3-29DTF324 HDSS 3-29DTF324R HDSS 3-29DTF325 HDSS 3-29DTF326 HDSS 3-29DTF361 HDSS 3-29DTF362 HDSS 3-29DTF363 HDSS 3-29DTF363R HDSS 3-29DTF364 HDSS 3-29DTF364R HDSS 3-29DTF365 HDSS 3-29DTGNF223NR HDSS 3-29DTGNF223R HDSS 3-29DTGNF224NR HDSS 3-29DTGNF224R HDSS 3-29DTGNF323NR HDSS 3-29DTGNF323R HDSS 3-29DTGNF324NR HDSS 3-29DTGNF324R HDSS 3-29DTNF221 HDSS 3-29DTNF222 HDSS 3-29DTNF223 HDSS 3-29DTNF224 HDSS 3-29DTNF224R HDSS 3-29DTNF225 HDSS 3-29DTNF225R HDSS 3-29DTNF321 HDSS 3-29DTNF322 HDSS 3-29DTNF323 HDSS 3-29DTNF323R HDSS 3-29DTNF324 HDSS 3-29DTNF324R HDSS 3-29DTNF325 HDSS 3-29DTNF326 HDSS 3-29DTNF327 HDSS 3-29DTNF361 HDSS 3-29DTNF361J HDSS 3-29DTNF361R HDSS 3-29DTNF361S HDSS 3-29DTNF362 HDSS 3-29DTNF362J HDSS 3-29DTNF362R HDSS 3-29DTNF362S HDSS 3-29DTNF363 HDSS 3-29DTNF363J HDSS 3-29DTNF363R HDSS 3-29DTNF363S HDSS 3-29DTNF364 HDSS 3-29DTNF364J HDSS 3-29DTNF364R HDSS 3-29DTNF364S HDSS 3-29DTNF365 HDSS 3-29DTNF365R HDSS 3-29DTNF366 HDSS 3-29DTNF366R HDSS 3-29DTNF367 HDSS 3-29DTNF367R HDSS 3-29DTNF368 HDSS 3-29DTNF368R HDSS 3-29E NEMA 16-153E NEMA 16-154E0202MB1100 RESI 1-10E0202MB1200 RESI 1-10E0204ML1060F RESI 1-10E0204ML1060S RESI 1-10E0204ML1060S RESI 5-8E0204ML1125SCU RESI 1-10E0303ML3100S RESI 1-10E0303ML3100S RESI 5-8E0408ML1125F RESI 1-9E0816ML1125F RESI 1-9E0816ML1125FCU RESI 1-9E0816ML1125SCU RESI 1-9E1020MB1100FCGP RESI 1-13E1020MB1100FCGP RESI 1-9E1224ML1100FCU RESI 1-13E1224ML1100FCU RESI 1-9E1224ML1100FG RESI 1-9E1SSHND69100GN MCCB 5-6E1SSHND69120GN MCCB 5-6E1SSND69100GN MCCB 5-6E1SSND69120GN MCCB 5-6E2BMB MCCB 6-87E2HBL MCCB 12-23E2HBL MCCB 6-86E2N12 MCCB 5-13E2N12 MCCB 6-34E2N1F 5-8E2N1F 6-34E2N1S MCCB 5-8E2N1S MCCB 6-34E2N3R MCCB 5-10E2N3R MCCB 6-34E2RH1 MCCB 6-88E2RHV9 MCCB 6-88E3030MB1400SCU RESI 1-12E3030MB3400SCU RESI 1-12E3030ML1400SCU RESI 1-12E3030ML3400SCU RESI 1-12E3RSHND69100GN MCCB 5-6E3RSHND69120GN MCCB 5-6E3RSND69100GN MCCB 5-6E3RSND69120GN MCCB 5-6E4242MB1300FCU RESI 1-12E4242MB1300SCU RESI 1-12E4242MB1400FCU RESI 1-12E4242MB1400SCU RESI 1-12E4242MB3300SCU RESI 1-12E4242MB3400FCU RESI 1-12E4242MB3400SCU RESI 1-12E4242ML1400FCU RESI 1-12E4242ML1400SCU RESI 1-12E4242ML3400FCU RESI 1-12E4242ML3400SCU RESI 1-12EA MCCB 5-12EA MCCB 6-34EB MCCB 5-12EB MCCB 6-34EB3100S RESI 1-10EB3100S RESI 5-8EB3100S RESI 6-27EB3225 6-28EB3225F RESI 1-10EB3225F RESI 5-9EB3225S RESI 5-9EBF1 10-11EC2 MCCB 5-12EC2 MCCB 6-37EC38594 RESG 2-10EC38594 RESG 2-26EC38594 RESG 2-74EC38595 RESG 2-10EC38595 RESG 2-26EC38595 RESG 2-74EC38595 RESG 2-85EC38596 RESG 2-10EC38596 RESG 2-26EC38596 RESG 2-74EC38596 RESG 2-85EC38597 RESG 2-10EC38597 RESG 2-26EC38597 RESG 2-74EC38597 RESG 2-85EC38598 RESG 2-10EC38598 RESG 2-26EC38598 RESG 2-74EC38598 RESG 2-85EC38599 RESG 2-10EC38599 RESG 2-26EC38599 RESG 2-74EC38599 RESG 2-85EC38600 RESG 2-10EC38600 RESG 2-26EC38600 RESG 2-74EC38600 RESG 2-85EC4 MCCB 5-12EC4 MCCB 6-41EC56854 RESG 2-73EC56854 RESG 2-74EC56854 RESG 2-81EC56855 RESG 2-73EC56855 RESG 2-74EC56855 RESG 2-81EC56856 RESG 2-10EC56856 RESG 2-26EC56856 RESG 2-73EC56856 RESG 2-74EC56856 RESG 2-81EC56857 RESG 2-10EC56857 RESG 2-26EC56857 RESG 2-73EC56857 RESG 2-74EC56857 RESG 2-81EC56858 RESG 2-10EC56858 RESG 2-26EC56858 RESG 2-73EC56858 RESG 2-74EC56858 RESG 2-81EC56933S RESG 2-10EC56933S RESG 2-26EC56933S RESG 2-73EC56933S RESG 2-74EC56933S RESG 2-81EC64685 2-10EC659-0120 RESG 2-10EC659-0121 RESG 2-10EC9747-1113 RESG 2-10EC9747-1113 RESG 2-26ECA10 BPLU 14-51ECA8 BUSW 14-51ECBX231M RESG 1-25ECBX231M RESG 1-26ECBX231M RESG 1-35ECBX231M RESG 6-19ECCP1 RESG 1-35ECCP1 RESG 1-8ECCP1U RESG 2-81ECCP2U RESG 2-81ECCP3 RESG 2-10ECCP3 RESG 2-26ECCP3U RESG 2-74ECCP3U RESG 2-81ECCP3U RESG 2-81ECCS1 RESG 1-35ECCS2 RESG 1-35ECDL1 RESG 1-35ECGB10 RESG 1-35ECGB10 RESG 1-8ECGB101 RESG 1-35ECGB14 RESG 1-35ECGB141 RESG 1-35ECGB142 RESG 1-35ECGB20 RESG 1-35ECGB201 RESG 1-35ECGB202 RESG 1-35ECGB5 RESG 1-35ECGB5 RESG 1-8ECGK UNPB 10-11ECHA075 RESG 3-20ECHA100 3-20ECHA125 3-20ECHBD1 RESG 1-24ECHBD1 RESG 1-35ECHBD1 RESG 6-18ECHBD1 RESG 6-26ECHBK RESG 2-74ECHC000 RESG 2-10ECHC000 RESG 2-26ECHC000 RESG 2-85ECHC200 RESG 2-10ECHC200 RESG 2-26ECHC200 RESG 2-85ECHC250 RESG 2-10ECHC250 RESG 2-26ECHC250 RESG 2-85ECHC300 RESG 2-10ECHC300 RESG 2-26ECHC300 RESG 2-85ECHCRXA 2-26ECHCRXA 2-85ECHR075 RESG 2-81ECHR075 RESG 5-14ECHR100 RESG 2-81ECHR100 RESG 5-14ECHR125 RESG 2-81ECHR125 RESG 5-14ECHR150 RESG 2-81ECHR150 RESG 5-14ECHR200 RESG 2-81ECHR200 RESG 5-14ECHS000 RESG 1-35ECHS000 RESG 1-8ECHS000 RESG 2-26ECHS000 RESG 3-20ECHS075 RESG 1-35ECHS075 RESG 1-8ECHS075 RESG 2-26ECHS075 RESG 3-20ECHS075 RESG 3-30ECHS075 RESG 5-14ECHS100 RESG 1-35ECHS100 RESG 1-8ECHS100 RESG 2-26ECHS100 RESG 3-20ECHS100 RESG 3-30ECHS100 RESG 5-14ECHS125 RESG 1-35ECHS125 RESG 1-8ECHS125 RESG 2-26ECHS125 RESG 3-20ECHS125 RESG 3-30ECHS125 RESG 5-14ECHS125 RESG 5-14ECHS150 RESG 1-35ECHS150 RESG 1-8ECHS150 RESG 2-26ECHS150 RESG 3-20ECHS150 RESG 3-30ECHS150 RESG 5-14ECHS150 RESG 5-14ECHS200 RESG 1-35ECHS200 RESG 1-8ECHS200 RESG 2-26ECHS200 RESG 3-20ECHS200 RESG 3-30ECHS200 RESG 5-14ECHS200 RESG 5-14ECHS250 RESG 1-35ECHS250 RESG 1-8ECHS250 RESG 2-26ECHS250 RESG 3-20ECHS250 RESG 3-30ECHS250 RESG 5-14ECHV000 RESG 2-26ECHV200 RESG 2-26ECHV200 RESG 2-81ECHV250 RESG 2-26ECHV250 RESG 2-81ECHV250 RESG 3-20ECHV250 RESG 5-14ECHV300 RESG 2-26ECHV300 RESG 2-81ECHV300 RESG 3-20ECHV300 RESG 5-14ECHV350 RESG 2-26ECHV350 RESG 2-81ECHV350 RESG 3-20ECHV350 RESG 5-14ECHV400 RESG 2-26ECHV400 RESG 2-81ECHV400 RESG 3-20ECHV400 RESG 5-14ECINSGB14 RESG 1-35ECINSGB20 RESG 1-35ECINSGB5 RESG 1-35ECJS RESG 2-10ECJS RESG 2-81ECLK1-2 RESG 1-35ECLK1-2 RESG 1-8ECLK1-2 RESG 2-26ECLK2 RESG 1-35ECLK2 RESG 1-8ECLK2 RESG 2-26ECLK2125 RESG 1-35ECLK2150 RESG 1-35ECLK2225 RESG 1-35ECLK2SC RESG 1-35ECLK3 RESG 1-35ECLK3 RESG 2-26ECLK3125 1-35ECLK3225 RESG 1-35ECLKB1 RESG 1-35ECLKB1 RESG 1-8ECLX068M RESG 2-26ECLX069M RESG 2-26ECLX071M RESG 2-26ECLX072M RESG 2-26ECLX073M RESG 2-26ECLX074M RESG 2-26ECLX075M RESG 2-26ECMBF125 RESG 1-35ECMBR1 RESG 1-35ECMBR2 RESG 1-35ECMLK125 RESG 1-35ECMLK225 RESG 1-35ECMM5J RESG 2-74ECMM5J RESG 2-81ECMMI5J RESG 2-74ECMMI5J RESG 2-81ECP10 BUSW 14-51ECP6 BUSW 14-5119-4Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory PageECP6 BUSW 14-51ECP6 BUSW 14-51ECP6 BUSW 14-51ECPLD1 RESG 1-35ECPLD1 RESG 6-18ECPLD1 RESG 6-19ECPLD1 RESG 6-26ECPLD1 RESG 6-86ECPLD125 RESG 1-35ECPLD2 RESG 1-35ECPLD2 RESG 6-18ECPLD2 RESG 6-19ECPLD2 RESG 6-26ECPLD2 RESG 6-86ECPLD2R 1-35ECPP RESG 2-10ECPP RESG 2-26ECPP RESG 2-74ECPP RESG 2-74ECPP RESG 2-81ECQF3 RESG 1-35ECQF3 RESG 1-8ECQF3 RESG 2-74ECQFL1 RESG 1-35ECQFL2 RESG 1-35ECQFL2 RESG 1-8ECQL1 RESG 1-35ECQL1 RESG 6-86ECQLD3 RESG 1-24ECQLD3 RESG 6-18ECQLD3 RESG 6-26ECQLD3 RESG 6-86ECQLN3 RESG 1-35ECQML12 RESG 1-35ECQML12 RESG 6-87ECQTH2 RESG 1-35ECQTH3 RESG 6-86ECRLK250 RESG 1-35ECSMK1 1-35ECSN1 RESG 1-35ECTS2 RESG 1-35ECTS2 RESG 1-8ED21B015 MCCB 6-34ED21B020 MCCB 6-34ED21B025 MCCB 6-34ED21B030 MCCB 6-34ED21B035 MCCB 6-34ED21B040 MCCB 6-34ED21B045 MCCB 6-34ED21B050 MCCB 6-34ED21B060 MCCB 6-34ED21B070 MCCB 6-34ED21B080 MCCB 6-34ED21B090 MCCB 6-34ED21B100 MCCB 6-34ED22B015 MCCB 6-34ED22B020 MCCB 6-34ED22B025 MCCB 6-34ED22B030 MCCB 6-34ED22B035 MCCB 6-34ED22B040 MCCB 6-34ED22B045 MCCB 6-34ED22B050 MCCB 6-34ED22B060 MCCB 6-34ED22B070 MCCB 6-34ED22B070 MCCB 6-34ED22B090 MCCB 6-34ED22B100 MCCB 6-34ED22S100A MCCB 6-72ED23B015 MCCB 6-34ED23B020 MCCB 6-34ED23B025 MCCB 6-34ED23B030 MCCB 6-34ED23B035 MCCB 6-34ED23B040 MCCB 6-34ED23B045 MCCB 6-34ED23B050 MCCB 6-34ED23B060 MCCB 6-34ED23B070 MCCB 6-34ED23B080 MCCB 6-34ED23B090 MCCB 6-34ED23B100 MCCB 6-34ED23S100A MCCB 6-72ED2HPL MCCB 12-23ED2HPL MCCB 6-86ED41B015 MCCB 6-34ED41B020 MCCB 6-34ED41B020 MCCB 6-34ED41B030 MCCB 6-34ED41B035 MCCB 6-34ED41B040 MCCB 6-34ED41B045 MCCB 6-34ED41B050 MCCB 6-34ED41B060 MCCB 6-34ED41B070 MCCB 6-34ED41B080 MCCB 6-34ED41B090 MCCB 6-34ED41B100 MCCB 6-34ED42B015 MCCB 6-34ED42B020 MCCB 6-34ED42B025 MCCB 6-34ED42B030 MCCB 6-34ED42B035 MCCB 6-34ED42B040 MCCB 6-34ED42B045 MCCB 6-34ED42B050 MCCB 6-34ED42B060 MCCB 6-34ED42B070 MCCB 6-34ED42B080 MCCB 6-34ED42B090 MCCB 6-34ED42B100 MCCB 6-34ED42B110 MCCB 6-34ED42B125 MCCB 6-34ED42S100A MCCB 6-72ED42S125A MCCB 6-72ED43B015 MCCB 6-34ED43B020 MCCB 6-34ED43B025 MCCB 6-34ED43B030 MCCB 6-34ED43B035 MCCB 6-34ED43B040 MCCB 6-34ED43B045 MCCB 6-34ED43B050 MCCB 6-34ED43B060 MCCB 6-34ED43B070 MCCB 6-34ED43B080 MCCB 6-34ED43B090 MCCB 6-34ED43B100 MCCB 6-34ED43B110 MCCB 6-34ED43B125 MCCB 6-34ED43S100A MCCB 6-72ED43S125A MCCB 6-72ED6 MCCB 5-12ED6 MCCB 6-45ED61B015 MCCB 6-34ED61B020 MCCB 6-34ED61B025 MCCB 6-34ED61B030 MCCB 6-34ED61B035 MCCB 6-34ED61B040 MCCB 6-34ED61B040 MCCB 6-34ED61B050 MCCB 6-34ED61B060 MCCB 6-34ED61B070 MCCB 6-34ED61B080 MCCB 6-34ED61B090 MCCB 6-34ED61B100 MCCB 6-34ED62B015 MCCB 6-34ED62B020 MCCB 6-34ED62B025 MCCB 6-34ED62B030 MCCB 6-34ED62B035 MCCB 6-34ED62B040 MCCB 6-34ED62B045 MCCB 6-34ED62B050 MCCB 6-34ED62B060 MCCB 6-34ED62B070 MCCB 6-34ED62B080 MCCB 6-34ED62B090 MCCB 6-34ED62B100 MCCB 6-34ED62S100A MCCB 6-72ED63A001 MCCB 6-66ED63A002 MCCB 6-66ED63A003 MCCB 6-66ED63A005 MCCB 6-66ED63A010 MCCB 6-66ED63A025 MCCB 6-66ED63A030 MCCB 6-66ED63A040 MCCB 6-66ED63A050 MCCB 6-66ED63A100 MCCB 6-66ED63A125 MCCB 6-66ED63B015 MCCB 6-34ED63B020 MCCB 6-34ED63B025 MCCB 6-34ED63B030 MCCB 6-34ED63B035 MCCB 6-34ED63B040 MCCB 6-34ED63B045 MCCB 6-34ED63B050 MCCB 6-34ED63B060 MCCB 6-34ED63B070 MCCB 6-34ED63B080 MCCB 6-34ED63B090 MCCB 6-34ED63B100 MCCB 6-34ED63B110 MCCB 6-34ED63B125 MCCB 6-34ED63S100A MCCB 6-72ED63S125A MCCB 6-72ED6SS4 5-12ED6SS4 6-34EE MCCB 5-12EE MCCB 6-41EGK UNPB 10-11EJP302 BUSW 14-50EJP304 BUSW 14-50EJP306 BUSW 14-50EJP308 BUSW 14-50EJP310 BUSW 14-50EJP313 BUSW 14-50EJP316 BUSW 14-50EJP4024 BUSW 14-50EJP4044 BUSW 14-50EJP4064 BUSW 14-50EJP4084 BUSW 14-50EJP4104 BUSW 14-50ELTPHB MCCB 6-138ELTPHB MCCB 6-138ELTPHB MCCB 6-139ELTPHB MCCB 6-139ELTPHB MCCB 6-139ELTPHB MCCB 6-139ELTPHB MCCB 6-139EMC5J RESG 2-26EP MCCB 6-80EPC06 MCCB 6-80EPC08 MCCB 6-80EPC12 MCCB 6-80EPC18 MCCB 6-80EPC24 6-80EPSB4DMK PWCB 6-80EPSB4FMK PWCB 6-80EPSBDMK PWCB 6-80EPSBFMK PWCB 6-80EPSP18V MCCB 6-138EPSP18V MCCB 6-138EPSP18V MCCB 6-139EPSP18V MCCB 6-139EPSP18V MCCB 6-139EPSP18V MCCB 6-139EPSP18V MCCB 6-139ETB302 BUSW 14-51ETB304 BUSW 14-51ETB306 BUSW 14-51ETB308 BUSW 14-51ETB310 BUSW 14-51ETB313 BUSW 14-51ETB316 BUSW 14-51ETB4024 BUSW 14-51ETB4044 BUSW 14-51ETB4064 BUSW 14-51ETB4084 BUSW 14-51ETB4104 BUSW 14-51EWK1 UNPB 10-11EWK2 UNPB 10-11EX11 MCCB 6-86EXSTD 6-86F353SSDTK HDSS 3-29F354SSDTK HDSS 3-29F355SSDTK HDSS 3-29F56B UNPB 10-10F602 PBSB 10-50F602 PBSB 4-21F602D PBSB 10-61F602D PBSB 4-21F6150D PBSB 10-61F6150D PBSB 4-21F6162D PBSB 10-61F6162D PBSB 12-26F6162D PBSB 4-22F657 PBSB 10-50F657 PBSB 10-50F657 PBSB 10-50F657 PBSB 10-50F657 PBSB 10-50F657 PBSB 10-50F657 PBSB 10-50F657 PBSB 4-21F657 PBSB 4-21F657 PBSB 4-21F657 PBSB 4-21F657 PBSB 4-21F657 PBSB 4-21F657D PBSB 10-61F657D PBSB 10-61F657D PBSB 10-61F657D PBSB 10-61F657D PBSB 10-61F657D PBSB 10-61F657D PBSB 10-61F657D PBSB 4-21F657D PBSB 4-21F657D PBSB 4-21F657D PBSB 4-21F657D PBSB 4-21F657D PBSB 4-21F671 PBSB 10-50F671 PBSB 4-21F671D PBSB 10-61F671D PBSB 4-21F672 PBSB 10-50F672 PBSB 4-21F672D PBSB 10-61F672D PBSB 4-21F6N12 5-13F6N12 6-37F6N1F MCCB 5-8F6N1S MCCB 5-8F6N1S MCCB 6-37F6N3R MCCB 5-10F6N3R MCCB 6-37F6RH1 MCCB 6-88F6RHV9 MCCB 6-88FBCD3 6-132FBCF3 6-132FBCJ3 6-133FBCL3 6-133FBCM3 6-133FBCP3 6-133FBCP3 6-133FC3022 14-59FC3025 14-59FC3042 14-59FC3045 14-59FC3062 14-59FC3065 14-59FC3085 14-59FC3125 14-59FC4022 14-59FC4025 14-59FC4042 14-59FC4045 14-59FC4062 14-59FC4065 14-59FC4085 14-59FC4125 14-59FCJK603 HDSS 4-11FCJK606 HDSS 4-11FCJK606 HDSS 4-11FCK203 HDSS 4-11FCK206 HDSS 4-11FCK206 HDSS 4-11FCK206 HDSS 4-11FCK606 HDSS 4-11FCK606 HDSS 4-11FCK610 HDSS 4-11FCK610 HDSS 4-11FCK610 HDSS 4-11FCK610 HDSS 4-11FCK620 HDSS 4-11FCK620 HDSS 4-11FCK620 HDSS 4-11FCK620 HDSS 4-11FCRK203 HDSS 4-11FCRK206 HDSS 4-11FCRK206 HDSS 4-11FCRK206 HDSS 4-11FCRK606 HDSS 4-11FCRK606 HDSS 4-11FD62B070 MCCB 6-37FD62B080 MCCB 6-37FD62B090 MCCB 6-37FD62B100 MCCB 6-37FD62B110 MCCB 6-37FD62B125 MCCB 6-37FD62B150 MCCB 6-37FD62B175 MCCB 6-37FD62B200 MCCB 6-37FD62B225 MCCB 6-37FD62B250 MCCB 6-37FD62F250 MCCB 6-37FD62T070 MCCB 6-37FD62T070 MCCB 6-38FD62T080 MCCB 6-37FD62T080 MCCB 6-38FD62T090 MCCB 6-37FD62T090 MCCB 6-38FD62T100 MCCB 6-37FD62T100 MCCB 6-38FD62T110 MCCB 6-37FD62T110 MCCB 6-38FD62T125 MCCB 6-37FD62T125 MCCB 6-38FD62T150 MCCB 6-37FD62T150 MCCB 6-38FD62T175 MCCB 6-37FD62T175 MCCB 6-38FD62T200 MCCB 6-37FD62T200 MCCB 6-38FD62T225 MCCB 6-37FD62T225 MCCB 6-38FD62T250 MCCB 6-37FD62T250 MCCB 6-38FD63B070 MCCB 6-37FD63B080 MCCB 6-37FD63B090 MCCB 6-37FD63B100 MCCB 6-37FD63B110 MCCB 6-37FD63B125 MCCB 6-37FD63B150 MCCB 6-37FD63B175 MCCB 6-37FD63B200 MCCB 6-37FD63B225 MCCB 6-37FD63B250 MCCB 6-37FD63F250 MCCB 6-37FD63T070 MCCB 6-37FD63T070 MCCB 6-38FD63T070 MCCB 6-38FD63T080 MCCB 6-37FD63T080 MCCB 6-38FD63T080 MCCB 6-38FD63T090 MCCB 6-37FD63T090 MCCB 6-38FD63T090 MCCB 6-38FD63T100 MCCB 6-37FD63T100 MCCB 6-38FD63T100 MCCB 6-38FD63T110 MCCB 6-37FD63T110 MCCB 6-38FD63T110 MCCB 6-38FD63T125 MCCB 6-37FD63T125 MCCB 6-38FD63T125 MCCB 6-38FD63T150 MCCB 6-37FD63T150 MCCB 6-38FD63T150 MCCB 6-38FD63T175 MCCB 6-37FD63T175 MCCB 6-38FD63T175 MCCB 6-38FD63T200 MCCB 6-37FD63T200 MCCB 6-38FD63T200 MCCB 6-38FD63T225 MCCB 6-37FD63T225 MCCB 6-38FD63T225 MCCB 6-38FD63T250 MCCB 6-37FD63T250 MCCB 6-38FD63T250 MCCB 6-38FD6HB1 MCCB 6-86FD6PL1 MCCB 6-86FD6SS4 5-12FD6SS4 6-37FDFBEL MCCB 6-89FDFBEL4 MCCB 6-89FDFBER MCCB 6-89FDFBER4 MCCB 6-89FDFBFL MCCB 6-89FDFBFL4 MCCB 6-89FDFBFR MCCB 6-89FDFBFR4 MCCB 6-89FDFS06L MCCB 4-12FDFS06L MCCB 4-12FDFS06L MCCB 4-12FDFS06R MCCB 4-12FDFS06R MCCB 4-12FDFS06R MCCB 4-12FDFS20L MCCB 4-12FDFS20R MCCB 4-12FDH10 MCCB 4-12FDH10 MCCB 4-1219 PRODUCTINDEXSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 19-5

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory Page19PRODUCTINDEXFDH10 MCCB 4-12FDH10 MCCB 4-12FDH10 MCCB 4-12FDH10 MCCB 4-12FDH104 MCCB 4-12FDH20 MCCB 4-12FDH20 MCCB 4-12FDH204 MCCB 4-12FDS06L MCCB 4-12FDS06L MCCB 4-12FDS06L MCCB 4-12FDS06R MCCB 4-12FDS06R MCCB 4-12FDS06R MCCB 4-12FDS20L 4-12FDS20R MCCB 4-12FE100 HDSS 4-12FE200 HDSS 4-12FEP302 BUSW 14-50FEP304 BUSW 14-50FEP306 BUSW 14-50FEP308 BUSW 14-50FEP310 BUSW 14-50FEP313 BUSW 14-50FEP316 BUSW 14-50FEP4024 BUSW 14-50FEP4044 BUSW 14-50FEP4064 BUSW 14-50FEP4084 BUSW 14-50FEP4104 BUSW 14-50FG0221S 6-100FG02512 6-100FG0251F 6-100FG0251S 6-100FG0253R 6-100FG0254S 6-100FG02579 6-100FHOE036 MCCB 6-89FHOEBO MCCB 6-89FHOEC036 MCCB 4-12FHOEC036 MCCB 4-12FHOEC036 MCCB 4-12FHOEC036 MCCB 4-12FHOEC036 MCCB 4-12FHOEC036 MCCB 4-12FHOEC036 MCCB 4-7FHOEC036 MCCB 6-89FHOEC048 MCCB 4-12FHOEC048 MCCB 4-7FHOEC048 MCCB 6-89FHOEC060 MCCB 4-12FHOEC060 MCCB 6-89FHOEC072 MCCB 6-89FHOEC084 MCCB 6-89FHOEC096 MCCB 6-89FHOEC120 MCCB 6-89FHOEC144 MCCB 6-89FHOF036 MCCB 6-89FHOFBO MCCB 6-89FHOFC036 MCCB 6-89FHOFC048 MCCB 6-89FHOFC060 MCCB 6-89FHOFC072 MCCB 6-89FHOFC084 MCCB 6-89FHOFC096 MCCB 6-89FHOFC120 MCCB 6-89FHOFC144 MCCB 6-89FHOH MCCB 6-89FHOH MCCB 6-89FHOH MCCB 6-89FHOH MCCB 6-89FHOH4 MCCB 6-89FHOH4 MCCB 6-89FHOH4 MCCB 6-89FHOH4 MCCB 6-89FHOHN MCCB 6-89FHOHN4 MCCB 6-89FHOHS MCCB 4-12FHOHS MCCB 4-12FHOHS MCCB 4-12FHOHS MCCB 4-12FHOHS MCCB 4-12FHOHS MCCB 4-12FHOHS MCCB 4-12FHOHS MCCB 4-12FHOHS4 MCCB 4-12FHOJ036 MCCB 6-89FHOJBO MCCB 6-89FHOJC036 MCCB 4-12FHOJC036 MCCB 4-12FHOJC036 MCCB 6-89FHOJC036 MCCB 6-89FHOJC048 MCCB 4-12FHOJC048 MCCB 6-89FHOJC060 MCCB 4-12FHOJC060 MCCB 6-89FHOJC072 MCCB 6-89FHOJC084 MCCB 6-89FHOJC096 MCCB 6-89FHOJC120 MCCB 6-89FHOJC144 MCCB 6-89FHOLM036 MCCB 6-89FHOLMBO MCCB 6-89FHON048 6-89FHONBO MCCB 6-89FHONC048 MCCB 6-89FHONC048 MCCB 6-89FHONC060 MCCB 6-89FHONC072 MCCB 6-89FHONC084 MCCB 6-89FHONC096 MCCB 6-89FHONC120 MCCB 6-89FHONC144 MCCB 6-89FHOS06036L MCCB 4-12FHOS06036L MCCB 4-12FHOS06036L MCCB 4-12FHOS06036R MCCB 4-12FHOS06036R MCCB 4-12FHOS06036R MCCB 4-12FHOS06L MCCB 4-12FHOS06L MCCB 4-12FHOS06L MCCB 4-12FHOS06R MCCB 4-12FHOS06R MCCB 4-12FHOS06R MCCB 4-12FHOS20036L MCCB 4-12FHOS20036R MCCB 4-12FHOS20L MCCB 4-12FHOS20R MCCB 4-12FHVF3R 6-128FHVF3RB 6-128FHVF4X 6-128FHVL3R 6-128FHVL3RB 6-128FHVL4X 6-128FMHOS MCCB 6-88FMPG1 6-87FMPG2 6-87FMPG3 6-87FP9508 MCCB 6-87FP9555 MCCB 6-87FP9556 MCCB 6-87FR325DTK HDSS 3-29FR326DTK HDSS 3-29FR355DTK HDSS 3-29FXD62B070 MCCB 6-37FXD62B080 MCCB 6-37FXD62B090 MCCB 6-37FXD62B100 MCCB 6-37FXD62B110 MCCB 6-37FXD62B125 MCCB 6-37FXD62B150 MCCB 6-37FXD62B175 MCCB 6-37FXD62B200 MCCB 6-37FXD62B225 MCCB 6-37FXD62B250 MCCB 6-37FXD62S250A MCCB 6-72FXD63A250 MCCB 6-66FXD63B070 MCCB 6-37FXD63B080 MCCB 6-37FXD63B090 MCCB 6-37FXD63B100 MCCB 6-37FXD63B110 MCCB 6-37FXD63B125 MCCB 6-37FXD63B150 MCCB 6-37FXD63B175 MCCB 6-37FXD63B200 MCCB 6-37FXD63B225 MCCB 6-37FXD63B250 MCCB 6-37FXD63H150 MCCB 6-66FXD63L150 MCCB 6-66FXD63L150 MCCB 6-66FXD63S250A MCCB 6-72G1212L1125 RESI 1-7G1212L1125CU RESI 1-7G1224B10060GC RESI 1-13G1224B1100 RESI 1-7G1224B1100CU RESI 1-7G1224B6060GC RESI 1-13G1224L1125 RESI 1-7G1224L1125CP RESI 1-8G1224L1125CU RESI 1-7G1224L1125CUSG RESI 1-7G1224L1200CU RESI 1-7G1224L3125CU RESI 1-11G1224L3200CU RESI 1-11G1624B1100 RESI 1-7G1624B1100CU RESI 1-7G1624L1125 RESI 1-7G1624L1125CP RESI 1-8G1624L1125CU RESI 1-7G1624L1125CUSG RESI 1-7G1630B1150 RESI 1-7G1836L3150CU RESI 1-11G1836L3200CU RESI 1-11G2020B1100 RESI 1-7G2020B1100CP RESI 1-8G2020B1100CU RESI 1-7G2020L1125 RESI 1-7G2020L1125CU RESI 1-7G2030B1150 RESI 1-7G2030B1150CU RESI 1-7G2030L1125CUSG RESI 1-7G2030L1150 RESI 1-7G2030L1150CU RESI 1-7G2030L1150CUSG RESI 1-7G2040B1200 RESI 1-7G2040B1200CU RESI 1-7G2040L1200 RESI 1-7G2040L1200CU RESI 1-7G2424B1100CU RESI 1-7G2424B1125 RESI 1-7G2424L1125 RESI 1-7G2430B1150 RESI 1-7G2430L1125CUSG RESI 1-7G2440B1200 RESI 1-7G2440L1125CU RESI 1-7G2440L1200 1-7G2440L1200CU RESI 1-7G2442B3150CU RESI 1-11G2442L3150CU RESI 1-11G2442L3200CU RESI 1-11G3030B1100CP RESI 1-8G3030B1100CU RESI 1-7G3030B1150 RESI 1-7G3030B1150CP 1-8G3030B1150CU RESI 1-7G3030B3100CU RESI 1-11G3030L1200 RESI 1-7G3030L1200CU RESI 1-7G3040B1200 RESI 1-7G3040B1200CP RESI 1-8G3040B1200CPP RESI 1-8G3040B1200CU RESI 1-7G3040L1125CU RESI 1-7G3040L1200 RESI 1-7G3040L1200CP RESI 1-8G3040L1200CP1 1-8G3040L1200CPP 1-8G3040L1200CU RESI 1-7G3040L1200CUSG RESI 1-7G3042B3200CU RESI 1-11G3042L3200CU RESI 1-11G4040B1200 RESI 1-7G4040B1200CP RESI 1-8G4040B1200CP1 1-8G4040B1200CPP RESI 1-8G4040B1200CU RESI 1-7G4040B1200CUSGP RESI 1-8G4040L1200 RESI 1-7G4040L1200CPP 1-8G4040L1200CU RESI 1-7G4040L1200CUSG RESI 1-7G4242B1225CU RESI 1-7G4242B3200CU RESI 1-11G4242B3225CU RESI 1-11G4242L1225CU RESI 1-7G4242L3225CU RESI 1-11GF01ED60 MCCB 6-36GF01ED60B0 MCCB 6-36GF01ED60BC MCCB 6-36GF221N GDSS 3-8GF221NR GDSS 3-8GF222N GDSS 3-8GF222NR GDSS 3-8GF223N GDSS 3-8GF223NR GDSS 3-8GF224N GDSS 3-8GF224NR GDSS 3-8GF225N GDSS 3-8GF225NH GDSS 3-8GF225NR GDSS 3-8GF225NRH GDSS 3-8GF226N GDSS 3-8GF226NH GDSS 3-8GF226NR GDSS 3-8GF226NRH GDSS 3-8GF321N GDSS 3-8GF321NR GDSS 3-8GF322N GDSS 3-8GF322NR GDSS 3-8GF323N GDSS 3-8GF323NR GDSS 3-8GF324N GDSS 3-8GF324NR GDSS 3-8GF325N GDSS 3-8GF325NH GDSS 3-8GF325NR GDSS 3-8GF325NRH GDSS 3-8GF326N GDSS 3-8GF326NH GDSS 3-8GF326NR GDSS 3-8GF326NRH GDSS 3-8GG01212N MCCB 5-13GG0121FN/SN 5-8GG0123RN MCCB 5-10GH223 HDSS 3-34GH223 HDSS 3-34GH223 HDSS 3-34GH24 HDSS 3-34GMBC1 2-82GMBC2 2-82GNF321 GDSS 3-8GNF321R GDSS 3-8GNF322 GDSS 3-8GNF322R GDSS 3-8GNF323 GDSS 3-8GNF323R GDSS 3-8GNF324 GDSS 3-8GNF324R GDSS 3-8GNF325 GDSS 3-8GNF326 GDSS 3-8GSGK60 HDSS 3-19GSGK60 HDSS 3-33GSRK321 HDSS 3-17H55890 2-10H56476 2-10H56476 2-73H56732 2-10H56732-2 2-73H56732-M 2-73H58022 2-10H58852 2-10H59676 2-10H60162 2-73H68752-1 2-73HA161234 HDSS 3-18HA161234 HDSS 3-30HA161234 HDSS 4-9HA165678 HDSS 3-18HA165678 HDSS 3-30HA165678 HDSS 4-9HA2 NEMA 16-89HA261234 HDSS 3-18HA261234 HDSS 3-30HA261234 HDSS 4-9HA265678 HDSS 3-18HA265678 HDSS 3-30HA265678 HDSS 4-9HA361234 HDSS 3-18HA361234 HDSS 4-9HA365678 HDSS 3-18HA365678 HDSS 4-9HAS1 MCCB 6-89HB NEMA 16-84HB1B015 MCCB 6-26HB1B020 MCCB 6-26HB1B025 6-26HB1B030 MCCB 6-26HB1B035 6-26HB1B040 MCCB 6-26HB1B045 6-26HB1B050 MCCB 6-26HB1B060 6-26HB1B070 6-26HB2B010 6-26HB2B015 MCCB 6-26HB2B020 MCCB 6-26HB2B025 6-26HB2B030 MCCB 6-26HB2B035 6-26HB2B040 MCCB 6-26HB2B045 6-26HB2B050 MCCB 6-26HB2B060 MCCB 6-26HB2B070 MCCB 6-26HB2B080 6-26HB2B090 MCCB 6-26HB2B100 MCCB 6-26HB2B110 6-26HB2B125 6-26HB3B010 6-26HB3B015 MCCB 6-26HB3B020 MCCB 6-26HB3B025 6-26HB3B030 MCCB 6-26HB3B035 6-26HB3B040 MCCB 6-26HB3B045 6-26HB3B050 MCCB 6-26HB3B060 MCCB 6-26HB3B070 MCCB 6-26HB3B080 MCCB 6-26HB3B090 MCCB 6-26HB3B100 MCCB 6-26HBB21 HDSS 3-34HBB22 HDSS 3-34HBB612 HDSS 3-34HBB612 HDSS 3-34HBB62 HDSS 3-34HBB63 HDSS 3-34HBB64 HDSS 3-34HBB656 HDSS 3-34HBB656 HDSS 3-34HBB67A HDSS 3-34HBB68 HDSS 3-34HBDE MCCB 6-86HBDF MCCB 6-136HBDF MCCB 6-136HBDL MCCB 6-137HBDL MCCB 6-137HBDM MCCB 6-137HBDP MCCB 6-137HBDP MCCB 6-137HCL612 HDSS 3-20HCL623 HDSS 3-20HCL65 HDSS 3-20HCL65678 HDSS 3-20HCL65678 HDSS 3-20HCP327HT VBSS 4-22HCP327VT VBSS 4-22HCP328HT VBSS 4-22HCP328VT VBSS 4-22HCP367H VBSS 4-22HCP367HJ400 VBSS 4-22HCP367HJ600 VBSS 4-22HCP367V VBSS 4-22HCP367VJ400 VBSS 4-22HCP367VJ600 VBSS 4-22HCP368H VBSS 4-22HCP368V VBSS 4-22HCPCLP VBSS 4-22HCPST120 VBSS 4-22HCPST125 4-22HCPST240 VBSS 4-22HCPST277 VBSS 4-22HCPST48 VBSS 4-22HCPST480 VBSS 4-22HDG2B050L 6-97HDG2B060L 6-97HDG2B070L 6-97HDG2B080L 6-97HDG2B090L 6-97HDG2B100L 6-97HDG2B110L 6-97HDG2B125L 6-97HDG2B150L 6-97HDG2F150 MCCB 6-97HDG3B050L 6-97HDG3B060L 6-97HDG3B070L 6-97HDG3B080L 6-97HDG3B090L 6-97HDG3B100L 6-97HDG3B110L 6-97HDG3B125L 6-97HDG3B150L 6-97HDG3D060L 6-98HDG3D100L 6-98HDG3D150L 6-9819-6Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory PageHDG3E060L 6-98HDG3E100L 6-98HDG3E150L 6-98HDG3F150 MCCB 6-97HDG3F150 MCCB 6-98HDG3F150 MCCB 6-98HDG3N060L 6-98HDG3N100L 6-98HDG3N150L 6-98HDG3P060L 6-98HDG3P100L 6-98HDG3P150L 6-98HDG3U060L 6-98HDG3U100L 6-98HDG3U150L 6-98HDG3X060L 6-98HDG3X100L 6-98HDG3X150L 6-98HDG4B050L 6-97HDG4B060L 6-97HDG4B070L 6-97HDG4B080L 6-97HDG4B090L 6-97HDG4B100L 6-97HDG4B110L 6-97HDG4B125L 6-97HDG4B150L 6-97HDG4F150 6-97HDM3H150L MCCB 6-124HDM3L150L MCCB 6-124HDM3M150L MCCB 6-124HDS2S150L MCCB 6-123HDS3S150L MCCB 6-123HEB1B015B MCCB 6-24HEB1B020B MCCB 6-24HEB1B025B MCCB 6-24HEB1B030B MCCB 6-24HEB1B035B MCCB 6-24HEB1B040B MCCB 6-24HEB1B045B MCCB 6-24HEB1B050B MCCB 6-24HEB1B060B MCCB 6-24HEB1B070B MCCB 6-24HEB1B080B MCCB 6-24HEB1B090B MCCB 6-24HEB1B100B MCCB 6-24HEB1B110B MCCB 6-24HEB1B125B MCCB 6-24HEB2B015B MCCB 6-24HEB2B020B MCCB 6-24HEB2B025B MCCB 6-24HEB2B030B MCCB 6-24HEB2B035B MCCB 6-24HEB2B040B 6-24HEB2B045B MCCB 6-24HEB2B050B MCCB 6-24HEB2B060B MCCB 6-24HEB2B070B MCCB 6-24HEB2B080B MCCB 6-24HEB2B090B MCCB 6-24HEB2B100B MCCB 6-24HEB2B110B MCCB 6-24HEB2B125B MCCB 6-24HEB3B015B MCCB 6-24HEB3B020B MCCB 6-24HEB3B025B MCCB 6-24HEB3B030B MCCB 6-24HEB3B035B MCCB 6-24HEB3B040B MCCB 6-24HEB3B045B MCCB 6-24HEB3B050B MCCB 6-24HEB3B060B MCCB 6-24HEB3B070B MCCB 6-24HEB3B080B MCCB 6-24HEB3B090B MCCB 6-24HEB3B100B MCCB 6-24HEB3B110B MCCB 6-24HEB3B125B MCCB 6-24HED41B015 MCCB 6-35HED41B020 MCCB 6-35HED41B025 MCCB 6-35HED41B030 MCCB 6-35HED41B035 MCCB 6-35HED41B040 MCCB 6-35HED41B045 MCCB 6-35HED41B050 MCCB 6-35HED41B060 MCCB 6-35HED41B070 MCCB 6-35HED41B080 MCCB 6-35HED41B090 MCCB 6-35HED41B100 MCCB 6-35HED42B015 MCCB 6-35HED42B020 MCCB 6-35HED42B025 MCCB 6-35HED42B030 MCCB 6-35HED42B035 MCCB 6-35HED42B040 MCCB 6-35HED42B045 MCCB 6-35HED42B050 MCCB 6-35HED42B060 MCCB 6-35HED42B070 MCCB 6-35HED42B080 MCCB 6-35HED42B090 MCCB 6-35HED42B100 MCCB 6-35HED42B110 MCCB 6-35HED42B125 MCCB 6-35HED43B015 MCCB 6-35HED43B020 MCCB 6-35HED43B025 MCCB 6-35HED43B030 MCCB 6-35HED43B035 MCCB 6-35HED43B040 MCCB 6-35HED43B045 MCCB 6-35HED43B050 MCCB 6-35HED43B060 MCCB 6-35HED43B070 MCCB 6-35HED43B080 MCCB 6-35HED43B090 MCCB 6-35HED43B100 MCCB 6-35HED43B110 MCCB 6-35HED43B125 MCCB 6-35HEG1B015L MCCB 6-32HEG1B020L MCCB 6-32HEG1B025L MCCB 6-32HEG1B030L MCCB 6-32HEG1B035L MCCB 6-32HEG1B040L MCCB 6-32HEG1B045L MCCB 6-32HEG1B050L MCCB 6-32HEG1B060L MCCB 6-32HEG1B070L MCCB 6-32HEG1B080L MCCB 6-32HEG1B090L MCCB 6-32HEG1B100L MCCB 6-32HEG1B110L MCCB 6-32HEG1B125L MCCB 6-32HEG2B015L 6-32HEG2B020L 6-32HEG2B025L 6-32HEG2B030L 6-32HEG2B035L 6-32HEG2B040L 6-32HEG2B045L 6-32HEG2B050L 6-32HEG2B060L 6-32HEG2B070L 6-32HEG2B080L 6-32HEG2B090L 6-32HEG2B100L 6-32HEG2B110L 6-32HEG2B125L 6-32HEG3B015L MCCB 6-32HEG3B020L MCCB 6-32HEG3B025L MCCB 6-32HEG3B030L MCCB 6-32HEG3B035L MCCB 6-32HEG3B040L MCCB 6-32HEG3B045L MCCB 6-32HEG3B050L MCCB 6-32HEG3B060L MCCB 6-32HEG3B070L MCCB 6-32HEG3B080L MCCB 6-32HEG3B090L MCCB 6-32HEG3B100L MCCB 6-32HEG3B110L MCCB 6-32HEG3B125L MCCB 6-32HEG4B015L 6-32HEG4B020L 6-32HEG4B025L 6-32HEG4B030L 6-32HEG4B035L 6-32HEG4B040L 6-32HEG4B045L 6-32HEG4B050L 6-32HEG4B060L 6-32HEG4B070L 6-32HEG4B080L 6-32HEG4B090L 6-32HEG4B100L 6-32HEG4B110L 6-32HEG4B125L 6-32HES3S100L MCCB 6-72HES3S125L MCCB 6-72HF221J HDSS 3-10HF221N HDSS 3-10HF221NR HDSS 3-10HF221S HDSS 3-10HF222J HDSS 3-10HF222N HDSS 3-10HF222NR HDSS 3-10HF222S HDSS 3-10HF223J HDSS 3-10HF223N HDSS 3-10HF223NR HDSS 3-10HF223S HDSS 3-10HF224J HDSS 3-10HF224N HDSS 3-10HF224NR HDSS 3-10HF224S HDSS 3-10HF225N HDSS 3-10HF225NH HDSS 3-10HF225NR HDSS 3-10HF225NRH HDSS 3-10HF226N HDSS 3-10HF226NH HDSS 3-10HF226NR HDSS 3-10HF226NRH HDSS 3-10HF227N HDSS 3-10HF227NR HDSS 3-10HF228N HDSS 3-10HF228NR HDSS 3-10HF261 HDSS 3-11HF261J HDSS 3-11HF261R HDSS 3-11HF261S HDSS 3-11HF262 HDSS 3-11HF262J HDSS 3-11HF262R HDSS 3-11HF262S HDSS 3-11HF263 HDSS 3-11HF263J HDSS 3-11HF263R HDSS 3-11HF263S HDSS 3-11HF265 HDSS 3-11HF265J HDSS 3-11HF265R HDSS 3-11HF265S HDSS 3-11HF266 HDSS 3-11HF266J HDSS 3-11HF266R HDSS 3-11HF266S HDSS 3-11HF321J HDSS 3-10HF321JCH HDSS 3-15HF321N HDSS 3-10HF321NR HDSS 3-10HF321NX HDSS 3-16HF321S HDSS 3-10HF321SCH HDSS 3-15HF322J HDSS 3-10HF322JCH HDSS 3-15HF322JPN HDSS 3-15HF322N HDSS 3-10HF322NR HDSS 3-10HF322NX HDSS 3-16HF322S HDSS 3-10HF322SCH HDSS 3-15HF323J HDSS 3-10HF323JCH HDSS 3-15HF323N HDSS 3-10HF323NR HDSS 3-10HF323S HDSS 3-10HF323SCH HDSS 3-15HF324J HDSS 3-10HF324N HDSS 3-10HF324NR HDSS 3-10HF324S HDSS 3-10HF325J HDSS 3-10HF325N HDSS 3-10HF325N HDSS 3-10HF325NH HDSS 3-10HF325NRH HDSS 3-10HF325S HDSS 3-10HF326J HDSS 3-10HF326N HDSS 3-10HF326NH HDSS 3-10HF326NR HDSS 3-10HF326NRH HDSS 3-10HF326S HDSS 3-10HF327J HDSS 3-10HF327N HDSS 3-10HF327NR HDSS 3-10HF327S HDSS 3-10HF328N HDSS 3-10HF328NR HDSS 3-10HF361 HDSS 3-11HF361J HDSS 3-11HF361JCH HDSS 3-15HF361JCHW HDSS 3-15HF361JPN HDSS 3-15HF361JW HDSS 3-13HF361L HDSS 3-11HF361N HDSS 3-11HF361NR HDSS 3-11HF361NX HDSS 3-16HF361R HDSS 3-11HF361RL HDSS 3-11HF361S HDSS 3-11HF361SCH HDSS 3-15HF361SCHW HDSS 3-15HF361SPN HDSS 3-15HF361SW HDSS 3-13HF362 HDSS 3-11HF362J HDSS 3-11HF362JCH HDSS 3-15HF362JCHW HDSS 3-15HF362JPN HDSS 3-15HF362JW HDSS 3-13HF362N HDSS 3-11HF362NR HDSS 3-11HF362NX HDSS 3-16HF362R HDSS 3-11HF362RL HDSS 3-11HF362S HDSS 3-11HF362SCH HDSS 3-15HF362SCHW HDSS 3-15HF362SPN HDSS 3-15HF362SW HDSS 3-13HF363 HDSS 3-11HF363J HDSS 3-11HF363JCH HDSS 3-15HF363JCHW HDSS 3-15HF363JW HDSS 3-13HF363N HDSS 3-11HF363NR HDSS 3-11HF363NX HDSS 3-16HF363R HDSS 3-11HF363S HDSS 3-11HF363SCH HDSS 3-15HF363SCHW HDSS 3-15HF363SW HDSS 3-13HF364 HDSS 3-11HF364J HDSS 3-11HF364JW HDSS 3-13HF364N HDSS 3-11HF364NR HDSS 3-11HF364NX HDSS 3-16HF364R HDSS 3-11HF364S HDSS 3-11HF364SW HDSS 3-13HF365 HDSS 3-11HF365H HDSS 3-11HF365J HDSS 3-11HF365JW HDSS 3-13HF365N HDSS 3-11HF365NR HDSS 3-11HF365R HDSS 3-11HF365RH HDSS 3-11HF365S HDSS 3-11HF365SW HDSS 3-13HF366 HDSS 3-11HF366H HDSS 3-11HF366J HDSS 3-11HF366JW HDSS 3-13HF366N HDSS 3-11HF366NR HDSS 3-11HF366R HDSS 3-11HF366RH HDSS 3-11HF366S HDSS 3-11HF367 HDSS 3-11HF367J HDSS 3-11HF367N HDSS 3-11HF367NR HDSS 3-11HF367R HDSS 3-11HF367S HDSS 3-11HF368 HDSS 3-11HF368J HDSS 3-11HF368N HDSS 3-11HF368NR HDSS 3-11HF368R HDSS 3-11HF368S HDSS 3-11HF461 HDSS 3-14HF461J HDSS 3-14HF462 HDSS 3-14HF462J HDSS 3-14HF463 HDSS 3-14HF463J HDSS 3-14HF464 HDSS 3-14HF464J HDSS 3-14HF63CX HDSS 3-33HF63CX HDSS 4-4HF661J HDSS 3-14HF661S HDSS 3-14HF662J HDSS 3-14HF662S HDSS 3-14HF663J HDSS 3-14HF663S HDSS 3-14HF664J HDSS 3-14HF664S HDSS 3-14HFB NEMA 16-87HFB21 HDSS 3-34HFB22 HDSS 3-34HFB612 HDSS 3-34HFB612 HDSS 3-34HFB62 HDSS 3-34HFB63 HDSS 3-34HFB64 HDSS 3-34HFB65 HDSS 3-34HFB66 HDSS 3-34HFB67A 3-34HFB68 HDSS 3-34HFD62B070 MCCB 6-38HFD62B080 MCCB 6-38HFD62B090 MCCB 6-38HFD62B100 MCCB 6-38HFD62B110 MCCB 6-38HFD62B125 MCCB 6-38HFD62B150 MCCB 6-38HFD62B175 MCCB 6-38HFD62B200 MCCB 6-38HFD62B225 MCCB 6-38HFD62B250 MCCB 6-38HFD62F250 MCCB 6-38HFD63B070 MCCB 6-38HFD63B080 MCCB 6-38HFD63B090 MCCB 6-38HFD63B100 MCCB 6-38HFD63B110 MCCB 6-38HFD63B125 MCCB 6-38HFD63B150 MCCB 6-38HFD63B175 MCCB 6-38HFD63B200 MCCB 6-38HFD63B225 MCCB 6-38HFD63B250 MCCB 6-38HFD63F250 MCCB 6-38HFG2B100L 6-101HFG2B110L 6-101HFG2B125L 6-101HFG2B150L 6-101HFG2B175L 6-101HFG2B200L 6-101HFG2B225L 6-101HFG2B250L 6-101HFG2F250 MCCB 6-101HFG3B100L 6-101HFG3B110L 6-101HFG3B125L 6-101HFG3B150L 6-101HFG3B175L 6-101HFG3B200L 6-101HFG3B225L 6-101HFG3B250L 6-101HFG3D100L 6-102HFG3D150L 6-102HFG3D250L 6-102HFG3E100L 6-102HFG3E150L 6-102HFG3E250L 6-102HFG3F250 MCCB 6-101HFG3F250 MCCB 6-102HFG3F250 MCCB 6-102HFG3N100L 6-102HFG3N150L 6-102HFG3N250L 6-102HFG3P100L 6-102HFG3P150L 6-102HFG3P250L 6-102HFG3U100L 6-102HFG3U150L 6-102HFG3U250L 6-102HFG3X100L 6-10219 PRODUCTINDEXSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 19-7

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory Page19PRODUCTINDEXHFG3X150L 6-102HFG3X250L 6-102HFG4B100L 6-101HFG4B110L 6-101HFG4B125L 6-101HFG4B150L 6-101HFG4B175L 6-101HFG4B200L 6-101HFG4B225L 6-101HFG4B250L 6-101HFG4F250 6-101HFM3H250L MCCB 6-124HFM3L250L MCCB 6-124HFM3M250L MCCB 6-124HFS2S250L MCCB 6-123HFS3S250L MCCB 6-123HFXD62S250A MCCB 6-72HFXD63S250A MCCB 6-72HG261234 HDSS 3-19HG2656 HDSS 3-19HG61234 HDSS 3-19HG61234 HDSS 3-19HG61234 HDSS 3-30HG61234 HDSS 4-9HG656 HDSS 3-19HG656 HDSS 3-30HG656 HDSS 4-9HG678 HDSS 3-19HG678 HDSS 3-30HH6123 HDSS 3-34HH6123 HDSS 3-34HH6123 HDSS 3-34HH6123 HDSS 3-34HH6123 HDSS 3-34HH6123 HDSS 3-34HH6123 HDSS 3-34HH6123 HDSS 3-34HH64 HDSS 3-34HH64 HDSS 3-34HH65678 HDSS 3-34HH65678 HDSS 3-34HH65678 HDSS 3-34HH65678 HDSS 3-34HH65678 HDSS 3-34HH65678 HDSS 3-34HH65678 HDSS 3-34HH65678 HDSS 3-34HH65678 HDSS 3-34HH68 3-34HH68 3-34HHD61234 HDSS 3-30HHD61234S 3-30HHD65678 HDSS 3-30HHED62B015 MCCB 6-35HHED62B020 MCCB 6-35HHED62B025 MCCB 6-35HHED62B030 MCCB 6-35HHED62B035 MCCB 6-35HHED62B040 MCCB 6-35HHED62B045 MCCB 6-35HHED62B050 MCCB 6-35HHED62B060 MCCB 6-35HHED62B070 MCCB 6-35HHED62B080 MCCB 6-35HHED62B090 MCCB 6-35HHED62B100 MCCB 6-35HHED62B110 MCCB 6-35HHED62B125 MCCB 6-35HHED63B015 MCCB 6-35HHED63B020 MCCB 6-35HHED63B025 MCCB 6-35HHED63B030 MCCB 6-35HHED63B035 MCCB 6-35HHED63B040 MCCB 6-35HHED63B045 MCCB 6-35HHED63B050 MCCB 6-35HHED63B060 MCCB 6-35HHED63B070 MCCB 6-35HHED63B080 MCCB 6-35HHED63B090 MCCB 6-35HHED63B100 MCCB 6-35HHED63B110 MCCB 6-35HHED63B125 MCCB 6-35HHFD63B070 MCCB 6-38HHFD63B080 MCCB 6-38HHFD63B090 MCCB 6-38HHFD63B100 MCCB 6-38HHFD63B110 MCCB 6-38HHFD63B125 MCCB 6-38HHFD63B150 MCCB 6-38HHFD63B175 MCCB 6-38HHFD63B200 MCCB 6-38HHFD63B225 MCCB 6-38HHFD63B250 MCCB 6-38HHFD63F250 MCCB 6-38HHJD62B200 MCCB 6-41HHJD62B225 MCCB 6-41HHJD62B250 6-41HHJD62B300 MCCB 6-41HHJD62B350 MCCB 6-41HHJD62B400 MCCB 6-41HHJD62F400 MCCB 6-41HHJD63B200 MCCB 6-41HHJD63B225 MCCB 6-41HHJD63B250 MCCB 6-41HHJD63B300 MCCB 6-41HHJD63B350 MCCB 6-41HHJD63B400 MCCB 6-41HHJD63F400 MCCB 6-41HHLD62B250 MCCB 6-45HHLD62B300 MCCB 6-45HHLD62B350 MCCB 6-45HHLD62B400 MCCB 6-45HHLD62B450 MCCB 6-45HHLD62B500 MCCB 6-45HHLD62B600 MCCB 6-45HHLD62F600 MCCB 6-45HHLD62T450 MCCB 6-45HHLD62T500 MCCB 6-45HHLD62T600 MCCB 6-45HHLD63B250 MCCB 6-45HHLD63B300 MCCB 6-45HHLD63B350 MCCB 6-45HHLD63B400 MCCB 6-45HHLD63B450 MCCB 6-45HHLD63B500 MCCB 6-45HHLD63B600 MCCB 6-45HHLD63F600 MCCB 6-45HHLD63T450 MCCB 6-45HHLD63T500 MCCB 6-45HHLD63T600 MCCB 6-45HJD62B200 MCCB 6-41HJD62B225 MCCB 6-41HJD62B250 MCCB 6-41HJD62B300 MCCB 6-41HJD62B350 MCCB 6-41HJD62B400 MCCB 6-41HJD62F400 MCCB 6-41HJD63B200 MCCB 6-41HJD63B225 MCCB 6-41HJD63B250 MCCB 6-41HJD63B300 MCCB 6-41HJD63B350 MCCB 6-41HJD63B400 MCCB 6-41HJD63F400 MCCB 6-41HJG2B250L 6-105HJG2B300L 6-105HJG2B350L 6-105HJG2B400L 6-105HJG2F400 MCCB 6-105HJG3B250L 6-105HJG3B300L 6-105HJG3B350L 6-105HJG3B400L 6-105HJG3D250L 6-106HJG3D400L 6-106HJG3E250L 6-106HJG3E400L 6-106HJG3F400 MCCB 6-105HJG3F400 MCCB 6-106HJG3F400 MCCB 6-106HJG3N250L 6-106HJG3N400L 6-106HJG3P250L 6-106HJG3P400L 6-106HJG3U250L 6-106HJG3U400L 6-106HJG3X250L 6-106HJG3X400L 6-106HJG4B250L 6-105HJG4B300L 6-105HJG4B350L 6-105HJG4B400L 6-105HJG4F400 6-105HJM3L400 MCCB 6-124HJM3M400 MCCB 6-124HJS2S400 MCCB 6-123HJS3S400 MCCB 6-123HJXD63S400A MCCB 6-72HL612 HDSS 3-34HL612 HDSS 3-34HL612 HDSS 3-34HL612 HDSS 3-34HL612 HDSS 3-34HL612 HDSS 3-34HL612 HDSS 3-34HL612 HDSS 3-34HL63 HDSS 3-34HL63 HDSS 3-34HL64 HDSS 3-34HL64 HDSS 3-34HL65678 HDSS 3-34HL65678 HDSS 3-34HL65678 HDSS 3-34HL65678 HDSS 3-34HL67A HDSS 3-34HL67A HDSS 3-34HL9419 MCCB 12-23HL9419 MCCB 6-86HLC612 HDSS 3-19HLC612 HDSS 4-9HLC63 HDSS 3-19HLC63 HDSS 4-9HLC64 HDSS 3-19HLC64 HDSS 4-9HLC65678 HDSS 3-19HLC65678 HDSS 4-9HLD62B250 MCCB 6-45HLD62B300 MCCB 6-45HLD62B350 MCCB 6-45HLD62B400 MCCB 6-45HLD62B450 MCCB 6-45HLD62B500 MCCB 6-45HLD62B600 MCCB 6-45HLD62F600 MCCB 6-45HLD63B250 MCCB 6-45HLD63B300 MCCB 6-45HLD63B350 MCCB 6-45HLD63B400 MCCB 6-45HLD63B450 MCCB 6-45HLD63B500 MCCB 6-45HLD63B600 MCCB 6-45HLD63F600 MCCB 6-45HLG2B400L 6-109HLG2B500L 6-109HLG2B600L 6-109HLG2F600 MCCB 6-109HLG3B400L 6-109HLG3B500L 6-109HLG3B600L 6-109HLG3D400L 6-110HLG3D600L 6-110HLG3E400L 6-110HLG3E600L 6-110HLG3F600 MCCB 6-109HLG3F600 MCCB 6-110HLG3F600 MCCB 6-110HLG3N400L 6-110HLG3N600L 6-110HLG3P400L 6-110HLG3P600L 6-110HLG3U400L 6-110HLG3U600L 6-110HLG3X400L 6-110HLG3X600L 6-110HLM3L600 MCCB 6-124HLM3M600 MCCB 6-124HLMD62B500 MCCB 6-49HLMD62B600 MCCB 6-49HLMD62B700 MCCB 6-49HLMD62B800 MCCB 6-49HLMD62F800 MCCB 6-49HLMD63B500 MCCB 6-49HLMD63B600 MCCB 6-49HLMD63B700 MCCB 6-49HLMD63B800 MCCB 6-49HLMD63F800 MCCB 6-49HLMXD63B500 MCCB 6-49HLMXD63B600 MCCB 6-49HLMXD63B700 MCCB 6-49HLMXD63B800 MCCB 6-49HLS2S600 MCCB 6-123HLS3S600 MCCB 6-123HLXD63S600A MCCB 6-72HM6123 HDSS 3-34HM6123 HDSS 3-34HM6123 HDSS 3-34HM6123 HDSS 3-34HM6123 HDSS 3-34HM6123 HDSS 3-34HM6123 HDSS 3-34HM6123 HDSS 3-34HM6123 HDSS 3-34HM6123 HDSS 3-34HM64 HDSS 3-34HM64 HDSS 3-34HM65 HDSS 3-34HM65 HDSS 3-34HM66 HDSS 3-34HM66 HDSS 3-34HM678 HDSS 3-34HM678 HDSS 3-34HM67A 3-34HM67A 3-34HMD62B500 MCCB 6-52HMD62B600 MCCB 6-52HMD62B700 MCCB 6-52HMD62B800 MCCB 6-52HMD62F800 MCCB 6-52HMD63B500 MCCB 6-52HMD63B600 MCCB 6-52HMD63B700 MCCB 6-52HMD63B800 MCCB 6-52HMD63F800 MCCB 6-52HMG2B600L 6-113HMG2B700L 6-113HMG2B800L 6-113HMG2F800 6-113HMG3B600L 6-113HMG3B700L 6-113HMG3B800L 6-113HMG3D600L 6-114HMG3D800L 6-114HMG3E600L 6-114HMG3E800L 6-114HMG3F800 6-113HMG3F800 6-114HMG3F800 6-114HMG3N600L 6-114HMG3N800L 6-114HMG3P600L 6-114HMG3P800L 6-114HMG3U600L 6-114HMG3U800L 6-114HMG3X600L 6-114HMG3X800L 6-114HMG4F800 6-114HMG4N600L 6-114HMG4N800L 6-114HMG4P600L 6-114HMG4P800L 6-114HMG4U600L 6-114HMG4U800L 6-114HMG4X600L 6-114HMG4X800L 6-114HMM3M800 MCCB 6-124HMS2S800 MCCB 6-123HMS3S800 MCCB 6-123HMXD63B500 MCCB 6-52HMXD63B600 MCCB 6-52HMXD63B700 MCCB 6-52HMXD63B800 MCCB 6-52HN263 HDSS 3-17HN263 HDSS 3-30HN263 HDSS 4-8HN264 HDSS 3-17HN612 HDSS 3-17HN612 HDSS 4-8HN623 HDSS 3-17HN623 HDSS 4-8HN64 HDSS 3-17HN656 HDSS 3-17HN656 HDSS 3-17HN678 HDSS 3-17HN678 HDSS 3-17HN678 HDSS 3-30HNB NEMA 16-87HNB NEMA 16-93HNB612 HDSS 3-34HNB612 HDSS 3-34HNB623 HDSS 3-34HNB623 HDSS 3-34HNB64 HDSS 3-34HNB65 HDSS 3-34HNB66 HDSS 3-34HNB678 HDSS 3-34HNB67A 3-34HNC264 HDSS 3-30HNC612 HDSS 3-30HND63B100 MCCB 6-56HND63B120 MCCB 6-56HND63B800 MCCB 6-56HND63B900 MCCB 6-56HND63F120 MCCB 6-56HND678 HDSS 3-30HNF261 HDSS 3-12HNF261J HDSS 3-12HNF261R HDSS 3-12HNF261S HDSS 3-12HNF262 HDSS 3-12HNF262J HDSS 3-12HNF262R HDSS 3-12HNF262S HDSS 3-12HNF263 HDSS 3-12HNF263J HDSS 3-12HNF263R HDSS 3-12HNF263S HDSS 3-12HNF265 HDSS 3-12HNF265J HDSS 3-12HNF265R HDSS 3-12HNF265S HDSS 3-12HNF266 HDSS 3-12HNF266J HDSS 3-12HNF266R HDSS 3-12HNF266S HDSS 3-12HNF3030CX HDSS 3-32HNF3060CX HDSS 3-32HNF3100CX HDSS 3-32HNF361 HDSS 3-12HNF361J HDSS 3-12HNF361JCH HDSS 3-15HNF361JCHW HDSS 3-15HNF361JPN HDSS 3-15HNF361JW HDSS 3-13HNF361R HDSS 3-12HNF361RL HDSS 3-12HNF361S HDSS 3-12HNF361SCH HDSS 3-15HNF361SCHW HDSS 3-15HNF361SPN HDSS 3-15HNF361SW HDSS 3-13HNF361X HDSS 3-16HNF362 HDSS 3-12HNF362H HDSS 3-12HNF362J HDSS 3-12HNF362JCH HDSS 3-15HNF362JCHW HDSS 3-15HNF362JH HDSS 3-12HNF362JPN HDSS 3-15HNF362JW HDSS 3-13HNF362R HDSS 3-12HNF362RH HDSS 3-12HNF362RL HDSS 3-12HNF362S HDSS 3-12HNF362SCH HDSS 3-15HNF362SCHW HDSS 3-15HNF362SH HDSS 3-12HNF362SPN HDSS 3-15HNF362SW HDSS 3-13HNF362X HDSS 3-16HNF363 HDSS 3-12HNF363J HDSS 3-12HNF363JCH HDSS 3-15HNF363JCHW HDSS 3-15HNF363JW HDSS 3-13HNF363R HDSS 3-12HNF363S HDSS 3-12HNF363SCH HDSS 3-15HNF363SCHW HDSS 3-15HNF363SW HDSS 3-13HNF363X HDSS 3-16HNF364 HDSS 3-12HNF364J HDSS 3-12HNF364JW HDSS 3-13HNF364R HDSS 3-12HNF364S HDSS 3-12HNF364SW HDSS 3-13HNF364X HDSS 3-16HNF365 HDSS 3-12HNF365J HDSS 3-12HNF365JW HDSS 3-13HNF365R HDSS 3-12HNF365S HDSS 3-12HNF365SW HDSS 3-13HNF366 HDSS 3-12HNF366J HDSS 3-12HNF366R HDSS 3-12HNF366S HDSS 3-12HNF367 HDSS 3-12HNF367J HDSS 3-1219-8Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory PageHNF367R HDSS 3-12HNF367S HDSS 3-12HNF368 HDSS 3-12HNF368J HDSS 3-12HNF368R HDSS 3-12HNF368S HDSS 3-12HNF461 HDSS 3-14HNF461J HDSS 3-14HNF462 HDSS 3-14HNF462J HDSS 3-14HNF463 HDSS 3-14HNF463J HDSS 3-14HNF464 HDSS 3-14HNF464J HDSS 3-14HNF661J HDSS 3-14HNF661S HDSS 3-14HNF662J HDSS 3-14HNF662S HDSS 3-14HNF663J HDSS 3-14HNF663S HDSS 3-14HNF664J HDSS 3-14HNF664S HDSS 3-14HNG2B100L 6-117HNG2B120L 6-117HNG2B800L 6-117HNG2B900L 6-117HNG2F120 6-117HNG3B100L 6-117HNG3B120L 6-117HNG3B800L 6-117HNG3B900L 6-117HNG3D100L 6-118HNG3D120L 6-118HNG3D800L 6-118HNG3E100L 6-118HNG3E120L 6-118HNG3E800L 6-118HNG3F120 6-117HNG3F120 6-118HNG3F120 6-118HNG3N100L 6-118HNG3N120L 6-118HNG3N800L 6-118HNG3P100L 6-118HNG3P120L 6-118HNG3P800L 6-118HNG3U100L 6-118HNG3U120L 6-118HNG3U800L 6-118HNG3X100L 6-118HNG3X120L 6-118HNG3X800L 6-118HNG4F120 6-118HNG4N100L 6-118HNG4N120L 6-118HNG4N800L 6-118HNG4P100L 6-118HNG4P120L 6-118HNG4P800L 6-118HNG4U100L 6-118HNG4U120L 6-118HNG4U800L 6-118HNG4X100L 6-118HNG4X120L 6-118HNG4X800L 6-118HNM3M120 MCCB 6-124HNS2S120 MCCB 6-123HNS3S120 MCCB 6-123HNXD63B100 MCCB 6-56HNXD63B120 MCCB 6-56HNXD63B900 MCCB 6-56HP61 HDSS 3-18HP61 HDSS 4-9HP62 HDSS 3-18HP62 HDSS 4-9HP63 HDSS 3-18HP63 HDSS 4-9HPD63B120 MCCB 6-59HPD63B140 MCCB 6-59HPD63B160 MCCB 6-59HPD63F160 MCCB 6-59HPG3B120 6-120HPG3B140 6-120HPG3B160 6-120HPG3D120 6-121HPG3D160 6-121HPG3E120 6-121HPG3E160 6-121HPG3F160 6-120HPG3F160 6-121HPG3F160 6-121HPG3N120 6-121HPG3N160 6-121HPG3P120 6-121HPG3P160 6-121HPG3U120 6-121HPG3U160 6-121HPG3X120 6-121HPG3X160 6-121HPG4F160 6-121HPG4N120 6-121HPG4N160 6-121HPG4P120 6-121HPG4P160 6-121HPG4U120 6-121HPG4U160 6-121HPG4X120 6-121HPG4X160 6-121HPLE MCCB 6-86HPLEB MCCB 6-86HPLF MCCB 6-136HPLF MCCB 6-136HPLG MCCB 6-86HPLL MCCB 6-137HPLL MCCB 6-137HPLM MCCB 6-137HPLP MCCB 6-137HPLP MCCB 6-137HPS3S160 MCCB 6-123HPXD63B120 MCCB 6-59HPXD63B140 MCCB 6-59HPXD63B160 MCCB 6-59HQ2100BH RESI 1-29HQ2125BH RESI 1-29HQ2150BH RESI 1-29HQ2175BH RESI 1-29HQ2200BH RESI 1-29HQ2225BH RESI 1-29HQJ23B100H MCCB 6-28HQJ23B110H MCCB 6-28HQJ23B125H MCCB 6-28HQJ23B150H MCCB 6-28HQJ23B175H MCCB 6-28HQJ23B200H MCCB 6-28HQJ23B225H MCCB 6-28HQN2150 RESI 1-29HQN2150R RESI 1-29HQN2175 RESI 1-29HQN2175R RESI 1-29HQN2200 RESI 1-29HQN2200R RESI 1-29“HR2, HR6” NEMA 16-87“HR2, HR6” NEMA 16-93HR21 HDSS 3-17HR21 HDSS 3-30HR21 HDSS 4-8HR612 HDSS 3-17HR612 HDSS 3-30HR612 HDSS 4-8HR62 HDSS 3-17HR62 HDSS 3-30HR62 HDSS 4-8HR63 HDSS 3-17HR63 HDSS 3-30HR63 HDSS 4-8HR64 HDSS 3-17HR64 HDSS 3-30HR64 HDSS 4-8HR656 HDSS 3-17HR656 HDSS 4-8HRD63B160 MCCB 6-62HRD63B180 MCCB 6-62HRD63B200 MCCB 6-62HRD63F200 MCCB 6-62HRXD63B160 MCCB 6-62HRXD63B180 MCCB 6-62HRXD63B200 MCCB 6-62HSBE 6-87HT23 HDSS 3-17HT23 HDSS 3-30HT23 HDSS 4-8HT24 HDSS 3-17HT24 HDSS 3-30HT24 HDSS 4-8HT63 HDSS 3-17HT63 HDSS 3-30HT63 HDSS 4-8HT64 HDSS 3-17HT64 HDSS 3-30HT64 HDSS 4-8I0202L1200 RESI 1-16I0204ML1125 RESI 1-16I0204ML1125 RESI 6-87I0303ML3100 RESI 1-16I0303ML3100 RESI 6-87I0408ML1125 RESI 1-16I0816L1200CT RESI 1-16I0816ML1125CU RESI 1-16I0816ML1125CUSP RESI 1-16I1220L1200CT RESI 1-16I1224L1125CU RESI 1-16I1224L1200CU RESI 1-16I1224L3125CU RESI 1-16I1224L3200CU RESI 1-16I1624L1125CU RESI 1-16I1632L1200CU RESI 1-16I1836L3200CU RESI 1-16I2040L1200CU RESI 1-16I2442L3200CU RESI 1-16I3040L1125CU RESI 1-16I3040L1200CU RESI 1-16I3042L3200CU RESI 1-16I4040L1200CU RESI 1-16I4242L1225CU RESI 1-16I4242L3225CU RESI 1-16ICGK UNPB 10-11IGK UNPB 10-11IMK1 UNPB 10-11IPBF MCCB 6-132IPBF MCCB 6-132IPBM MCCB 6-133IPBM MCCB 6-133IPBM MCCB 6-133IPBP MCCB 6-133IPBP MCCB 6-133IR0816L1200TR RESI 1-16IR1224L1125 RESI 1-16IR1632L1125 RESI 1-16IR2040L1125CU RESI 1-16IR2040L1200CU RESI 1-16IR2440L1200 RESI 1-16IR3040L1125 RESI 1-16IR3040L1200CU RESI 1-16IR4040L1200CU RESI 1-16IR4242L1225CU RESI 1-16J6N1 5-8J6N1 6-41J6N12 5-13J6N12 6-41J6N3R MCCB 5-10J6N3R MCCB 6-41JD62B200 MCCB 6-40JD62B225 MCCB 6-40JD62B250 MCCB 6-40JD62B300 MCCB 6-40JD62B350 MCCB 6-40JD62B400 MCCB 6-40JD62F400 MCCB 6-40JD62T200 MCCB 6-40JD62T200 MCCB 6-41JD62T200 MCCB 6-41JD62T225 MCCB 6-40JD62T225 MCCB 6-41JD62T225 MCCB 6-41JD62T250 MCCB 6-40JD62T250 MCCB 6-41JD62T250 MCCB 6-41JD62T250 MCCB 6-44JD62T250 MCCB 6-45JD62T250 MCCB 6-45JD62T300 MCCB 6-40JD62T300 MCCB 6-41JD62T300 MCCB 6-41JD62T300 MCCB 6-44JD62T300 MCCB 6-45JD62T300 MCCB 6-45JD62T350 MCCB 6-40JD62T350 MCCB 6-41JD62T350 MCCB 6-41JD62T350 MCCB 6-44JD62T350 MCCB 6-45JD62T350 MCCB 6-45JD62T400 MCCB 6-40JD62T400 MCCB 6-41JD62T400 MCCB 6-41JD62T400 MCCB 6-44JD62T400 MCCB 6-45JD62T400 MCCB 6-45JD63B200 MCCB 6-40JD63B225 MCCB 6-40JD63B250 MCCB 6-40JD63B300 MCCB 6-40JD63B350 MCCB 6-40JD63B400 MCCB 6-40JD63F400 MCCB 6-40JD63T200 MCCB 6-40JD63T200 MCCB 6-41JD63T200 MCCB 6-41JD63T225 MCCB 6-40JD63T225 MCCB 6-41JD63T225 MCCB 6-41JD63T250 MCCB 6-40JD63T250 MCCB 6-41JD63T250 MCCB 6-41JD63T250 MCCB 6-44JD63T250 MCCB 6-45JD63T250 MCCB 6-45JD63T300 MCCB 6-40JD63T300 MCCB 6-41JD63T300 MCCB 6-41JD63T300 MCCB 6-44JD63T300 MCCB 6-45JD63T300 MCCB 6-45JD63T350 MCCB 6-40JD63T350 MCCB 6-41JD63T350 MCCB 6-41JD63T350 MCCB 6-44JD63T350 MCCB 6-45JD63T350 MCCB 6-45JD63T400 MCCB 6-40JD63T400 MCCB 6-41JD63T400 MCCB 6-41JD63T400 MCCB 6-44JD63T400 MCCB 6-45JD63T400 MCCB 6-45JD6HBL MCCB 6-86JD6HPL MCCB 6-86JG03579 6-104JG04012 6-104JG0401S 6-104JG0401SC 6-104JG0403R 6-104JG0403RC 6-104JXD22B200 MCCB 6-40JXD22B225 MCCB 6-40JXD22B250 MCCB 6-40JXD22B300 MCCB 6-40JXD22B350 MCCB 6-40JXD22B400 MCCB 6-40JXD22S400A MCCB 6-72JXD23B200 MCCB 6-40JXD23B225 MCCB 6-40JXD23B250 MCCB 6-40JXD23B300 MCCB 6-40JXD23B350 MCCB 6-40JXD23B400 MCCB 6-40JXD23S400A MCCB 6-72JXD62B200 MCCB 6-40JXD62B225 MCCB 6-40JXD62B250 MCCB 6-40JXD62B300 MCCB 6-40JXD62B350 MCCB 6-40JXD62B400 MCCB 6-40JXD62H400 MCCB 6-66JXD63B200 MCCB 6-40JXD63B225 MCCB 6-40JXD63B250 MCCB 6-40JXD63B300 MCCB 6-40JXD63B350 MCCB 6-40JXD63B400 MCCB 6-40JXD63H400 MCCB 6-66JXD63L400 MCCB 6-66JXD63S400A MCCB 6-72K NEMA 16-84KCC NEMA 16-151KCC NEMA 16-152KT NEMA 16-78KTT NEMA 16-89LBR3025 HDSS 4-4LBR3025D HDSS 4-4LBR3040 HDSS 4-4LBR3060 HDSS 4-4LBR3080 HDSS 4-4LBR3100 HDSS 4-4LBR4040 HDSS 4-4LBRA1 HDSS 3-33LBRA1 HDSS 4-4LBRA2 HDSS 3-33LBRA2 HDSS 4-4LBRA25 HDSS 4-4LBRA25D HDSS 4-4LBRD1 HDSS 4-4LBRH10 HDSS 4-4LBRH2 HDSS 4-4LBRH3 HDSS 4-4LBRH4 HDSS 4-4LBRH5 HDSS 4-4LBRH6 HDSS 4-4LBRH7 HDSS 4-4LBRH8 HDSS 4-4LBRH9 HDSS 4-4LBRP25 HDSS 4-4LBRP25D HDSS 4-4LBRS040 HDSS 4-4LBRS050 HDSS 4-4LBRS055 HDSS 4-4LBRS080 HDSS 4-4LBRS120 HDSS 4-4LBRS180 HDSS 4-4LBRS305 HDSS 4-4LBT3040 HDSS 4-4LBT3060 HDSS 4-4LBT3080 HDSS 4-4LBT3100 HDSS 4-4LBT4040 HDSS 4-4LBTCP1 HDSS 4-4LBTCP2 HDSS 4-4LBTCP3 HDSS 4-4LD1E100 MCCB 6-82LD62B250 MCCB 6-44LD62B300 MCCB 6-44LD62B350 MCCB 6-44LD62B400 MCCB 6-44LD62B450 MCCB 6-44LD62B500 MCCB 6-44LD62B600 MCCB 6-44LD62F600 MCCB 6-44LD62T450 MCCB 6-44LD62T450 MCCB 6-45LD62T500 MCCB 6-44LD62T500 MCCB 6-45LD62T600 MCCB 6-44LD62T600 MCCB 6-45LD63B250 MCCB 6-44LD63B300 MCCB 6-44LD63B350 MCCB 6-44LD63B400 MCCB 6-44LD63B450 MCCB 6-44LD63B500 MCCB 6-44LD63B600 MCCB 6-44LD63F600 MCCB 6-44LD63T450 MCCB 6-44LD63T450 MCCB 6-45LD63T500 MCCB 6-44LD63T500 MCCB 6-45LD63T500 MCCB 6-45LD63T600 MCCB 6-44LD6N1 5-8LD6N1 6-45LD6N12 MCCB 5-13LD6N12 MCCB 6-45LD6N3R 5-10LD6N3R 6-45LD6SS4 5-12LD6SS4 6-41LD6SS4 6-45LDG2B050L 6-97LDG2B060L 6-97LDG2B070L 6-97LDG2B080L 6-97LDG2B090L 6-97LDG2B100L 6-97LDG2B110L 6-97LDG2B125L 6-97LDG2B150L 6-97LDG2F150 MCCB 6-97LDG3B050L 6-97LDG3B060L 6-97LDG3B070L 6-97LDG3B080L 6-97LDG3B090L 6-97LDG3B100L 6-97LDG3B110L 6-97LDG3B125L 6-97LDG3B150L 6-97LDG3D060L 6-98LDG3D100L 6-98LDG3D150L 6-98LDG3E060L 6-98LDG3E100L 6-9819 PRODUCTINDEXSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 19-9

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory Page19PRODUCTINDEXLDG3E150L 6-98LDG3F150 MCCB 6-97LDG3F150 MCCB 6-98LDG3F150 MCCB 6-98LDG3N060L 6-98LDG3N100L 6-98LDG3N150L 6-98LDG3P060L 6-98LDG3P100L 6-98LDG3P150L 6-98LDG3U060L 6-98LDG3U100L 6-98LDG3U150L 6-98LDG3X060L 6-98LDG3X100L 6-98LDG3X150L 6-98LDG4B050L 6-97LDG4B060L 6-97LDG4B070L 6-97LDG4B080L 6-97LDG4B090L 6-97LDG4B100L 6-97LDG4B110L 6-97LDG4B125L 6-97LDG4B150L 6-97LDG4F150 6-97LDP302 14-50LDP304 14-50LDP306 14-50LDP308 14-50LDP310 14-50LDP313 14-50LDP316 14-50LDP4024 14-50LDP4044 14-50LDP4064 14-50LDP4084 14-50LDP4104 14-50LDU-100 6-79LE NEMA 16-69LE NEMA 16-70LE NEMA 16-87LE NEMA 16-93LF111N GDSS 3-6LF111NR GDSS 3-6LF211N GDSS 3-6LF211NR GDSS 3-6LFG2B100L 6-101LFG2B110L 6-101LFG2B125L 6-101LFG2B150L 6-101LFG2B175L 6-101LFG2B200L 6-101LFG2B225L 6-101LFG2B250L 6-101LFG2F250 MCCB 6-101LFG3B100L 6-101LFG3B110L 6-101LFG3B125L 6-101LFG3B150L 6-101LFG3B175L 6-101LFG3B200L 6-101LFG3B225L 6-101LFG3B250L 6-101LFG3D100L 6-102LFG3D150L 6-102LFG3D250L 6-102LFG3E100L 6-102LFG3E150L 6-102LFG3E250L 6-102LFG3F250 MCCB 6-101LFG3F250 MCCB 6-102LFG3F250 MCCB 6-102LFG3N100L 6-102LFG3N150L 6-102LFG3N250L 6-102LFG3P100L 6-102LFG3P150L 6-102LFG3P250L 6-102LFG3U100L 6-102LFG3U150L 6-102LFG3U250L 6-102LFG3X100L 6-102LFG3X150L 6-102LFG3X250L 6-102LFG4B100L 6-101LFG4B110L 6-101LFG4B125L 6-101LFG4B150L 6-101LFG4B175L 6-101LFG4B200L 6-101LFG4B225L 6-101LFG4B250L 6-101LFG4F250 6-101LFS3S250L 6-123LG06012 6-108LG0601S 6-108LG0603R 6-108LG0604S 6-108LG06079 6-108LJG2B250L 6-105LJG2B300L 6-105LJG2B350L 6-105LJG2B400L 6-105LJG2F400 MCCB 6-105LJG3B250L 6-105LJG3B300L 6-105LJG3B350L 6-105LJG3B400L 6-105LJG3D250L 6-106LJG3D400L 6-106LJG3E250L 6-106LJG3E400L 6-106LJG3F400 MCCB 6-105LJG3F400 MCCB 6-106LJG3F400 MCCB 6-106LJG3N250L 6-106LJG3N400L 6-106LJG3P250L 6-106LJG3P400L 6-106LJG3U250L 6-106LJG3U400L 6-106LJG3X250L 6-106LJG3X400L 6-106LJG4B250L 6-105LJG4B300L 6-105LJG4B350L 6-105LJG4B400L 6-105LJG4F400 6-105LJS3S400 6-123LKB4 SWBD 12-22LKB6 SWBD 12-22LKB8 SWBD 12-22LKF4 SWBD 12-22LKF6 SWBD 12-22LLG2B400L 6-109LLG2B500L 6-109LLG2B600L 6-109LLG2F600 MCCB 6-109LLG3B400L 6-109LLG3B500L 6-109LLG3B600L 6-109LLG3D400L 6-110LLG3D600L 6-110LLG3E400L 6-110LLG3E600L 6-110LLG3F600 MCCB 6-109LLG3F600 MCCB 6-110LLG3F600 MCCB 6-110LLG3N400L 6-110LLG3N600L 6-110LLG3P400L 6-110LLG3P600L 6-110LLG3U400L 6-110LLG3U600L 6-110LLG3X400L 6-110LLG3X600L 6-110LLS3S600 6-123LMAP1600 6-120LMAP1600 6-133LMD1 5-8LMD1 6-49LMD12 MCCB 5-13LMD12 MCCB 6-49LMD3R MCCB 5-10LMD3R MCCB 6-49LMD62B500 6-48LMD62B600 MCCB 6-48LMD62B700 MCCB 6-48LMD62B800 MCCB 6-48LMD62F800 MCCB 6-48LMD62T500 MCCB 6-48LMD62T500 MCCB 6-49LMD62T600 MCCB 6-48LMD62T600 MCCB 6-49LMD62T700 MCCB 6-48LMD62T700 MCCB 6-49LMD62T800 MCCB 6-48LMD62T800 MCCB 6-49LMD63B500 MCCB 6-48LMD63B600 MCCB 6-48LMD63B700 MCCB 6-48LMD63B800 MCCB 6-48LMD63F800 MCCB 6-48LMD63T500 MCCB 6-48LMD63T500 MCCB 6-49LMD63T600 MCCB 6-48LMD63T600 MCCB 6-49LMD63T700 MCCB 6-48LMD63T700 MCCB 6-49LMD63T800 MCCB 6-48LMD63T800 MCCB 6-49LMG2B600L 6-113LMG2B700L 6-113LMG2B800L 6-113LMG2F800 6-113LMG3B600L 6-113LMG3B700L 6-113LMG3B800L 6-113LMG3D600L 6-114LMG3D800L 6-114LMG3E600L 6-114LMG3E800L 6-114LMG3F800 6-113LMG3F800 6-114LMG3F800 6-114LMG3N600L 6-114LMG3N800L 6-114LMG3P600L 6-114LMG3P800L 6-114LMG3U600L 6-114LMG3U800L 6-114LMG3X600L 6-114LMG3X800L 6-114LMG4F800 6-114LMG4N600L 6-114LMG4N800L 6-114LMG4P600L 6-114LMG4P800L 6-114LMG4U600L 6-114LMG4U800L 6-114LMG4X600L 6-114LMG4X800L 6-114LMS3S800 6-123LMXD62B600 MCCB 6-48LMXD62B700 MCCB 6-48LMXD62B800 MCCB 6-48LMXD63A800 MCCB 6-66LMXD63B500 MCCB 6-48LMXD63B600 MCCB 6-48LMXD63B700 MCCB 6-48LMXD63B800 MCCB 6-48LMXD63L800 MCCB 6-66LMXD63S800A MCCB 6-72LN1E100 MCCB 6-82LNF222R GDSS 3-6LNG2B100L 6-117LNG2B120L 6-117LNG2B800L 6-117LNG2B900L 6-117LNG2F120 6-117LNG3B100L 6-117LNG3B120L 6-117LNG3B800L 6-117LNG3B900L 6-117LNG3D100L 6-118LNG3D120L 6-118LNG3D800L 6-118LNG3E100L 6-118LNG3E120L 6-118LNG3E800L 6-118LNG3F120 6-117LNG3F120 6-118LNG3F120 6-118LNG3N100L 6-118LNG3N120L 6-118LNG3N800L 6-118LNG3P100L 6-118LNG3P120L 6-118LNG3P800L 6-118LNG3U100L 6-118LNG3U120L 6-118LNG3U800L 6-118LNG3X100L 6-118LNG3X120L 6-118LNG3X800L 6-118LNG4F120 6-118LNG4N100L 6-118LNG4N120L 6-118LNG4N800L 6-118LNG4P100L 6-118LNG4P120L 6-118LNG4P800L 6-118LNG4U100L 6-118LNG4U120L 6-118LNG4U800L 6-118LNG4X100L 6-118LNG4X120L 6-118LNG4X800L 6-118LNS3S120 6-123LPG3B120 6-120LPG3B140 6-120LPG3B160 6-120LPG3D120 6-121LPG3D160 6-121LPG3E120 6-121LPG3E160 6-121LPG3F160 6-120LPG3F160 6-121LPG3F160 6-121LPG3N120 6-121LPG3N160 6-121LPG3P120 6-121LPG3P160 6-121LPG3U120 6-121LPG3U160 6-121LPG3X120 6-121LPG3X160 6-121LPG4F160 6-121LPG4N120 6-121LPG4N160 6-121LPG4P120 6-121LPG4P160 6-121LPG4U120 6-121LPG4U160 6-121LPG4X120 6-121LPG4X160 6-121LPS3S160 6-123LXD62B450 MCCB 6-44LXD62B500 MCCB 6-44LXD62B600 MCCB 6-44LXD62L600 MCCB 6-66LXD63B450 MCCB 6-44LXD63B500 MCCB 6-44LXD63B600 MCCB 6-44LXD63H600 MCCB 6-66LXD63L600 MCCB 6-66LXD63S600A MCCB 6-72LXX-14 10-69LXX-20 10-69LXX-26 10-69LXX-32 10-69LXX-38 10-69LXX-41 10-69LXX-44 10-69LXX50-F 10-69LXX-53 10-69LXX-56 10-69LXX-62 10-69LXX-65 10-69LXX-68 10-69LXX-74 10-69LXX-80 10-69LXX-86 10-69LXXP-T 10-69MB120 MCCB 6-87MB9301 MCCB 6-59MB9301 MCCB 6-59MB9301 MCCB 6-59MB9301 MCCB 6-60MB9301 MCCB 6-62MB9301 MCCB 6-62MB9301 MCCB 6-62MB9301 MCCB 6-62MBK100 RESI 1-29MBK100A RESI 1-29MBK100A RESI 1-35MBK100A RESI 1-8MBK125 RESI 1-29MBK125A RESI 1-29MBK125A RESI 1-35MBK125A RESI 1-8MBK150 RESI 1-29MBK150A RESI 1-29MBK150A RESI 1-35MBK150A RESI 1-8MBK200 RESI 1-29MBK200A RESI 1-29MBK200A RESI 1-35MBK200A RESI 1-8MBK225 RESI 1-29MBK225A RESI 1-29MBK225A RESI 1-35MBK225A RESI 1-8MBKBC3 UNPB 10-11MBKBL1 UNPB 10-11MBKBL3 UNPB 10-11MBKED1 UNPB 10-11MBKED3 UNPB 10-11MBKED3100 MCCB 10-13MBKED3125 MCCB 10-13MBKFD1 UNPB 10-11MBKFD3 UNPB 10-11MBKFD3150 MCCB 10-13MBKFD3175 MCCB 10-13MBKFD3200 MCCB 10-13MBKFD3225 MCCB 10-13MBKFD3250 MCCB 10-13MBKJD1 UNPB 10-11MBKJD1300 MCCB 10-13MBKJD1400 MCCB 10-13MBKJD3 UNPB 10-11MBKJD3300 MCCB 10-13MBKJD3400 MCCB 10-13MBKNB1 UNPB 10-11MBKNB100 10-13MBKNB110 10-13MBKNB125 10-13MBKNB3 UNPB 10-11MBKQJ1 UNPB 10-11MBKQJ1125 MCCB 10-13MBKQJ1125H MCCB 10-13MBKQJ1150 MCCB 10-13MBKQJ1150H MCCB 10-13MBKQJ1175 MCCB 10-13MBKQJ1175H MCCB 10-13MBKQJ1200 MCCB 10-13MBKQJ1200H MCCB 10-13MBKQJ1225 MCCB 10-13MBKQJ1225H MCCB 10-13MBKQJ3 UNPB 10-11MBKQJ3125 MCCB 10-13MBKQJ3125H MCCB 10-13MBKQJ3150 MCCB 10-13MBKQJ3150H MCCB 10-13MBKQJ3175 MCCB 10-13MBKQJ3175H MCCB 10-13MBKQJ3200 MCCB 10-13MBKQJ3200H MCCB 10-13MBKQJ3225 MCCB 10-13MBKQJ3225H MCCB 10-13MBPG1600 6-120MBPG1600 6-133MBPG1601 6-120MBPG1601 6-133MBR9302 MCCB 6-60MBR9302 MCCB 6-62MBR9302 MCCB 6-62MBR9302 MCCB 6-62MBR9302 MCCB 6-62MC0408B1150RT RESI 2-20MC0408B1150T RESI 2-20MC0408B1200RT RESI 2-20MC0408B1200T RESI 2-20MC0408B1400RLTM 2-21MC0606L1200R RESI 2-20MC0606L1200RA RESI 2-20MC0606L1200RJB RESI 2-20MC0816B1150CT RESI 2-20MC0816B1150RCT RESI 2-20MC0816B1150RTH RESI 2-21MC0816B1150T RESI 2-21MC0816B1150TH RESI 2-21MC0816B1200CT RESI 2-20MC0816B1200FCTM RESI 2-22MC0816B1200RCT RESI 2-20MC0816B1200RT RESI 2-21MC0816B1200RTH RESI 2-21MC0816B1200SCTM RESI 2-22MC0816B1200T RESI 2-21MC0816B1200TH RESI 2-21MC0816B1350RLTM RESI 2-21MC0816B1400RLTM RESI 2-21MC1020B1100EY 2-85MC104BD RESG 2-83MC10BD 2-83MC1212L1200FED RESI 2-23MC1212L1200FED RESI 2-23MC1224B1100CEY 2-85MC1224B1100FEC RESI 2-2219-10Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory PageMC1224B1100SEC RESI 2-22MC1224B1125 RESI 2-21MC1224B1125FEC RESI 2-22MC1224B1125SEC RESI 2-22MC1224MB1125R RESI 2-21MC124BD RESG 2-83MC12BD 2-83MC1632B1100FEC RESI 2-22MC1632B1100SEC RESI 2-22MC1632B1125FEC RESI 2-22MC1830F3100CEY 2-85MC20 RESG 2-41MC20 RESG 2-41MC2040B1150 RESI 2-21MC2040B1150R 2-21MC2040B1150RC RESI 2-20MC2040B1150RJBC RESI 2-20MC2040B1200 RESI 2-21MC2040B1200FED RESI 2-23MC2040B1200R RESI 2-21MC2040B1200RC RESI 2-20MC2040B1200RJBC RESI 2-20MC2040B1200SED RESI 2-23MC2440B1200CEY 2-85MC2442B1200FEC RESI 2-22MC2442B1200SEC RESI 2-22MC2442B1225FEC RESI 2-22MC2442B1225SEC RESI 2-22MC2442B1250FE2 RESI 2-24MC2442F3200CEY 2-85MC3040B1200SECW RESI 2-22MC3042B1200FED RESI 2-23MC3042B1200SED RESI 2-23MC3042B1225FED RESI 2-23MC3042B1225SED RESI 2-23MC3042B1250FE2 RESI 2-24MC4040B1200SECW RESI 2-22MC44BD RESG 2-83MC4BD 2-83MC64BD RESG 2-83MC6BD 2-83MC84BD RESG 2-83MC8BD RESG 2-83MCB12 RESI 1-35MCS603R HDSS 4-11MCS606R HDSS 4-11MCS610R HDSS 4-11MCS620R HDSS 4-11MCSAK116 HDSS 4-12MCSAK116 HDSS 4-12MCSAK126 HDSS 4-12MCSAK126 HDSS 4-12MCSAK216 HDSS 4-12MCSAK216 HDSS 4-12MCSAK226 HDSS 4-12MCSAK226 HDSS 4-12MCSAKL136 HDSS 4-12MCSAKL136 HDSS 4-12MCSAKL236 HDSS 4-12MCSAKL236 HDSS 4-12MCSAKR136 HDSS 4-12MCSAKR136 HDSS 4-12MCSAKR236 HDSS 4-12MCSAKR236 HDSS 4-12MD62B500 MCCB 6-51MD62B600 MCCB 6-51MD62B700 MCCB 6-51MD62B800 MCCB 6-51MD62F800 MCCB 6-51MD62T500 MCCB 6-51MD62T500 MCCB 6-52MD62T600 MCCB 6-51MD62T600 MCCB 6-52MD62T700 MCCB 6-51MD62T700 MCCB 6-52MD62T800 MCCB 6-51MD62T800 MCCB 6-52MD62T800 MCCB 6-55MD63B500 MCCB 6-51MD63B600 MCCB 6-51MD63B700 MCCB 6-51MD63B800 MCCB 6-51MD63F800 MCCB 6-51MD63T500 MCCB 6-51MD63T500 MCCB 6-52MD63T600 MCCB 6-51MD63T600 MCCB 6-51MD63T600 MCCB 6-52MD63T700 MCCB 6-52MD63T800 MCCB 6-51MD63T800 MCCB 6-52MD63T800 MCCB 6-55MD63T800 MCCB 6-56MFCF036 6-128MFCF048 6-128MFCF060 6-128MFCF072 6-128MFCF084 6-128MFCF096 6-128MFCF120 6-128MFCF144 6-128MFCM036 6-128MFCM036 6-129MFCM048 6-128MFCM048 6-129MFCM060 6-128MFCM060 6-129MFCM072 6-128MFCM072 6-129MFCM084 6-128MFCM084 6-129MFCM096 6-128MFCM096 6-129MFCM120 6-128MFCM120 6-129MFCM144 6-128MFCM144 6-129MFCP048 6-129MFCP048 6-129MFCP060 6-129MFCP060 6-129MFCP072 6-129MFCP072 6-129MFCP084 6-129MFCP084 6-129MFCP096 6-129MFCP096 6-129MFCP120 6-129MFCP120 6-129MFCP144 6-129MFCP144 6-129MFHM3R 6-128MFHM3R 6-128MFHM3R 6-129MFHM3RB 6-128MFHM3RB 6-128MFHM3RB 6-129MFHM3RS 6-128MFHM3RS 6-128MFHM3RSB 6-128MFHM3RSB 6-128MFHM3RSB 6-129MFHM4X 6-128MFHM4X 6-128MFHM4X 6-129MFHP3RS 6-129MFHP3RS 6-129MFHP3RS 6-129MFHP3RSB 6-129MFHP3RSB 6-129MFHP4X 6-129MFHP4X 6-129MFKE3 MCCB 6-89MFKE4X3 MCCB 6-89MFKF3R 6-128MFKL3R 6-128MFKM3R 6-129MFKP3RS 6-129MFKP3RS 6-129MFMF 6-128MFML 6-128MFMM 6-129MFMP 6-129MFMP 6-129MFSFA1 6-128MFSFA2 6-128MFSLA1 6-128MFSLA2 6-128MFSPA1 6-129MFSPA1 6-129MFSPA1 6-129MFSPA2 6-129MFSPA2 6-129MFSPA2 6-129MG0801S 6-112MG0803R 6-112MG1 PBSB 10-50MG1D PBSB 10-61MG1D PBSB 12-26MI5404 MCCB 6-87MI5404 MCCB 6-87MI5405 MCCB 6-87MI5406 MCCB 6-87MI5413 MCCB 6-87MI5444 MCCB 6-87MLKA1 UNPB 10-11MLKA1 UNPB 10-12MLKA3 UNPB 10-11MLKA3 UNPB 10-12MLKC1 UNPB 10-11MLKC3 UNPB 10-11MM0202B1125RJB RESI 2-19MM0202B1125RJBX RESI 2-19MM0202B1150 RESI 2-19MM0202B1150R 2-19MM0202B1150RJB RESI 2-19MM0202B1150RJBX RESI 2-19MM0202B1200 RESI 2-19MM0202B1200R 2-19MM0202B1200RJB RESI 2-19MM0202B1200RJBX RESI 2-19MM0202F1100CEY 2-84MM0202F1100EY 2-84MM0202F1200CEY 2-84MM0202F1200EY 2-84MM0202L1100EY 2-84MM0202L1200CEY 2-84MM0202L1200EY 2-84MM0202ML1100S RESI 2-19MM0202ML1125H RESI 2-19MM0303F3100CEY 2-84MM0303F3100EY 2-84MM0303F3200CEY 2-84MM0303F3200EY 2-84MM0303L3100EY 2-84MM0303L3200CEY 2-84MM0303L3200EY 2-84MM0404L1400RLM RESI 2-19MM0406B1200FEC RESI 2-22MM0406B1200SEC RESI 2-22MM0406L1125FEC RESI 2-22MM0406L1125SEC RESI 2-22MM0406L1200H RESI 2-19MM0406L1200RH RESI 2-19MM0406L1200RHJB 2-19MMBMT1 2-82MMBMT2 2-82MMCVR1 2-82MMCVR1R 2-82MMCVR2 2-82MMCVR2R 2-82MMPK11 2-82MMPK13 2-82MMPK21 2-82MMPK23 2-82MMS NEMA 16-150MMSCK1 2-82MMSCK2 2-82MN6BL MCCB 6-86MN6PLD MCCB 6-86MND61 MCCB 5-8MND61 MCCB 6-51MND61 MCCB 6-53MND61 MCCB 6-55MND612 5-13MND612 6-51MND612 6-53MND612 6-55MND63 5-10MND63 6-51MND63 6-53MND63 6-55MOE6120 MCCB 6-90MOE6240 MCCB 6-90MOF6024DC MCCB 6-90MOF6048DC MCCB 6-90MOF6120 MCCB 6-90MOF6125DC MCCB 6-90MOF6240 MCCB 6-90MOJ6024DC MCCB 6-90MOJ6048DC MCCB 6-90MOJ6120 MCCB 6-90MOJ6125DC MCCB 6-90MOJ6240 MCCB 6-90MOLMD6024DC MCCB 6-90MOLMD6048DC MCCB 6-90MOLMD6120 MCCB 6-90MOLMD6125DC MCCB 6-90MOLMD6240 MCCB 6-90MOMN6120 MCCB 6-90MOMN6240 MCCB 6-90MRS NEMA 16-7MS14TB 2-9MS15TB 2-9MS17TB 2-9MS24TB 2-9MS25TB 2-9MS27TB 2-9MS44UBD RESG 2-83MS44UTB 2-9MS4UBD 2-83MS64UBD RESG 2-83MS6UBD 2-83MS84UBD RESG 2-83MS8UBD 2-83MSE6 MCCB 6-87MSE6100 MCCB 6-87MSF6 MCCB 6-87MSF650 MCCB 6-87MSJ6 MCCB 6-87MSK2001 12-26MSK2003 12-26MSKE1 MCCB 6-87MSKE2 MCCB 6-87MSKE4 MCCB 6-87MSKF2 MCCB 6-136MSKF2 MCCB 6-136MSKF4 MCCB 6-136MSKF4 MCCB 6-136MSKG4 MCCB 6-87MSKL4 MCCB 6-137MSKL4 MCCB 6-137MSKM4 MCCB 6-137MSKP4 MCCB 6-137MSKP4 MCCB 6-137MSLMD MCCB 6-87MSMN MCCB 6-87MSPR6 MCCB 6-87MSQJ MCCB 6-87MT NEMA 16-8MTA MCCB 6-80MTC08 MCCB 6-80MTC15 MCCB 6-80MTC25 MCCB 6-80MTC50 MCCB 6-80MTCSB08 6-80MTCSB15 6-80MTCSB25 6-80MTCSB50 6-80MTG NEMA 16-77MTRPB MCCB 6-131MTRPM MCCB 6-131MTRPN MCCB 6-131MTRPR MCCB 6-131MTRPY MCCB 6-131MTZ MCCB 6-80MXD62B500 6-51MXD62B600 MCCB 6-51MXD62B700 MCCB 6-51MXD62B800 MCCB 6-51MXD63A800 MCCB 6-66MXD63B500 MCCB 6-51MXD63B600 MCCB 6-51MXD63B700 MCCB 6-51MXD63B800 MCCB 6-51MXD63H800 MCCB 6-66MXD63L800 MCCB 6-66MXD63S800A MCCB 6-72N02SJD MCCB 6-42N03SJD MCCB 6-42N03SJD MCCB 6-46N04SJD MCCB 6-42N04SJD MCCB 6-46N05SLD MCCB 6-46N06SLD MCCB 6-46N06SMDA MCCB 6-53N07SMDA MCCB 6-53N08SMDA MCCB 6-53N08SMDA MCCB 6-57N10SNDA MCCB 6-57N12SNDA MCCB 6-57N14SPD MCCB 6-60N16SPD MCCB 6-60N2000 MCCB 5-6N2000 MCCB 5-7N2000 MCCB 5-7N2000 MCCB 5-9N20STD MCCB 6-64N2250 MCCB 5-4N2250 MCCB 5-7N2250 MCCB 5-9N250 MCCB 5-11N250 MCCB 5-12N250 MCCB 5-13N250 MCCB 5-4N250 MCCB 5-7N250 MCCB 5-9N250 MCCB 6-37N25STD 6-64N32STD MCCB 6-64NBK3 UNPB 10-11NBK4 UNPB 10-11NBK5 10-11NBK6 10-11ND62B100 MCCB 6-55ND62B120 MCCB 6-55ND62B800 MCCB 6-55ND62B900 MCCB 6-55ND62F120 MCCB 6-55ND62T100 MCCB 6-55ND62T120 MCCB 6-55ND62T900 MCCB 6-55ND63B100 MCCB 6-55ND63B800 MCCB 6-55ND63B900 MCCB 6-55ND63B900 MCCB 6-55ND63F120 MCCB 6-55ND63T100 MCCB 6-55ND63T100 MCCB 6-56ND63T120 MCCB 6-55ND63T120 MCCB 6-56ND63T900 MCCB 6-55ND63T900 MCCB 6-56NDG2B050L 6-97NDG2B060L 6-97NDG2B070L 6-97NDG2B080L 6-97NDG2B090L 6-97NDG2B100L 6-97NDG2B110L 6-97NDG2B125L 6-97NDG2B150L 6-97NDG2F150 MCCB 6-97NDG3B050L 6-97NDG3B060L 6-97NDG3B070L 6-97NDG3B080L 6-97NDG3B090L 6-97NDG3B100L 6-97NDG3B110L 6-97NDG3B125L 6-97NDG3B150L 6-97NDG3D060L 6-98NDG3D100L 6-98NDG3D150L 6-98NDG3E060L 6-98NDG3E100L 6-98NDG3E150L 6-98NDG3F150 MCCB 6-97NDG3F150 MCCB 6-98NDG3F150 MCCB 6-98NDG3N060L 6-98NDG3N100L 6-98NDG3N150L 6-98NDG3P060L 6-98NDG3P100L 6-98NDG3P150L 6-98NDG3U060L 6-98NDG3U100L 6-98NDG3U150L 6-98NDG3X060L 6-98NDG3X100L 6-98NDG3X150L 6-98NDG4B050L 6-97NDG4B060L 6-97NDG4B070L 6-97NDG4B080L 6-97NDG4B090L 6-97NDG4B100L 6-97NDG4B110L 6-97NDG4B125L 6-97NDG4B150L 6-97NDG4F150 6-97NEB1B015B MCCB 6-24NEB1B020B MCCB 6-24NEB1B025B MCCB 6-24NEB1B030B MCCB 6-24NEB1B035B MCCB 6-24NEB1B040B MCCB 6-24NEB1B045B MCCB 6-2419 PRODUCTINDEXSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 19-11

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory Page19PRODUCTINDEXNEB1B050B MCCB 6-24NEB1B060B MCCB 6-24NEB1B070B MCCB 6-24NEB1B080B MCCB 6-24NEB1B090B MCCB 6-24NEB1B100B MCCB 6-24NEB1B110B MCCB 6-24NEB1B125B MCCB 6-24NEB2B015B MCCB 6-24NEB2B020B MCCB 6-24NEB2B025B MCCB 6-24NEB2B030B MCCB 6-24NEB2B035B MCCB 6-24NEB2B040B MCCB 6-24NEB2B045B MCCB 6-24NEB2B050B MCCB 6-24NEB2B060B MCCB 6-24NEB2B070B MCCB 6-24NEB2B080B MCCB 6-24NEB2B090B MCCB 6-24NEB2B100B MCCB 6-24NEB2B110B MCCB 6-24NEB2B125B MCCB 6-24NEB3B015B MCCB 6-24NEB3B020B MCCB 6-24NEB3B025B MCCB 6-24NEB3B030B MCCB 6-24NEB3B035B MCCB 6-24NEB3B040B MCCB 6-24NEB3B045B MCCB 6-24NEB3B050B MCCB 6-24NEB3B060B MCCB 6-24NEB3B070B MCCB 6-24NEB3B080B MCCB 6-24NEB3B090B MCCB 6-24NEB3B100B MCCB 6-24NEB3B110B MCCB 6-24NEB3B125B MCCB 6-24NEG1B015L MCCB 6-32NEG1B020L MCCB 6-32NEG1B025L MCCB 6-32NEG1B030L MCCB 6-32NEG1B035L MCCB 6-32NEG1B040L MCCB 6-32NEG1B045L MCCB 6-32NEG1B050L MCCB 6-32NEG1B060L MCCB 6-32NEG1B070L MCCB 6-32NEG1B080L MCCB 6-32NEG1B090L MCCB 6-32NEG1B100L MCCB 6-32NEG1B110L MCCB 6-32NEG1B125L MCCB 6-32NEG2B015L 6-32NEG2B020L 6-32NEG2B025L 6-32NEG2B030L 6-32NEG2B035L 6-32NEG2B040L 6-32NEG2B045L 6-32NEG2B050L 6-32NEG2B060L 6-32NEG2B070L 6-32NEG2B080L 6-32NEG2B090L 6-32NEG2B100L 6-32NEG2B110L 6-32NEG2B125L 6-32NEG3B015L MCCB 6-32NEG3B020L MCCB 6-32NEG3B025L MCCB 6-32NEG3B030L MCCB 6-32NEG3B035L MCCB 6-32NEG3B040L MCCB 6-32NEG3B045L MCCB 6-32NEG3B050L MCCB 6-32NEG3B060L MCCB 6-32NEG3B070L MCCB 6-32NEG3B080L MCCB 6-32NEG3B090L MCCB 6-32NEG3B100L MCCB 6-32NEG3B110L MCCB 6-32NEG3B125L MCCB 6-32NEG4B015L 6-32NEG4B020L 6-32NEG4B025L 6-32NEG4B030L 6-32NEG4B035L 6-32NEG4B040L 6-32NEG4B045L 6-32NEG4B050L 6-32NEG4B060L 6-32NEG4B070L 6-32NEG4B080L 6-32NEG4B090L 6-32NEG4B100L 6-32NEG4B110L 6-32NEG4B125L 6-32NF355HDTK HDSS 3-29NF355SSDTK HDSS 3-29NF454DTK HDSS 3-29NF454SSDTK HDSS 3-29NF455DTK HDSS 3-29NF456DTK HDSS 3-29NF457DTK HDSS 3-29NFG2B100L 6-101NFG2B110L 6-101NFG2B125L 6-101NFG2B150L 6-101NFG2B175L 6-101NFG2B200L 6-101NFG2B225L 6-101NFG2B250L 6-101NFG2F250 MCCB 6-101NFG3B100L 6-101NFG3B110L 6-101NFG3B125L 6-101NFG3B150L 6-101NFG3B175L 6-101NFG3B200L 6-101NFG3B225L 6-101NFG3B250L 6-101NFG3D100L 6-102NFG3D150L 6-102NFG3D250L 6-102NFG3E100L 6-102NFG3E150L 6-102NFG3E250L 6-102NFG3F250 MCCB 6-101NFG3F250 MCCB 6-102NFG3F250 MCCB 6-102NFG3N100L 6-102NFG3N150L 6-102NFG3N250L 6-102NFG3P100L 6-102NFG3P150L 6-102NFG3P250L 6-102NFG3U100L 6-102NFG3U150L 6-102NFG3U250L 6-102NFG3X100L 6-102NFG3X150L 6-102NFG3X250L 6-102NFG4B100L 6-101NFG4B110L 6-101NFG4B125L 6-101NFG4B150L 6-101NFG4B175L 6-101NFG4B200L 6-101NFG4B225L 6-101NFG4B250L 6-101NFG4F250 6-101NFR451DTK HDSS 3-29NFR452DTK HDSS 3-29NFR453DTK HDSS 3-29NFR454DTK HDSS 3-29NFR455DTK HDSS 3-29NFR456DTK HDSS 3-29NFR457DTK HDSS 3-29NG12012 6-116NG1201S 6-116NG1203R 6-116NG1D PBSB 10-61NG1D PBSB 12-26NGB1B015B MCCB 6-22NGB1B020B MCCB 6-22NGB1B025B MCCB 6-22NGB1B030B MCCB 6-22NGB1B035B MCCB 6-22NGB1B040B MCCB 6-22NGB1B045B MCCB 6-22NGB1B050B MCCB 6-22NGB1B060B MCCB 6-22NGB1B070B MCCB 6-22NGB1B080B MCCB 6-22NGB1B090B MCCB 6-22NGB1B100B MCCB 6-22NGB1B110B MCCB 6-22NGB1B125B MCCB 6-22NGB2B015B MCCB 6-22NGB2B020B MCCB 6-22NGB2B025B MCCB 6-22NGB2B030B MCCB 6-22NGB2B035B MCCB 6-22NGB2B040B MCCB 6-22NGB2B045B MCCB 6-22NGB2B050B MCCB 6-22NGB2B060B MCCB 6-22NGB2B070B MCCB 6-22NGB2B080B MCCB 6-22NGB2B090B MCCB 6-22NGB2B100B MCCB 6-22NGB2B110B MCCB 6-22NGB2B125B MCCB 6-22NGB3B015B MCCB 6-22NGB3B020B MCCB 6-22NGB3B025B MCCB 6-22NGB3B030B MCCB 6-22NGB3B035B MCCB 6-22NGB3B040B MCCB 6-22NGB3B045B MCCB 6-22NGB3B050B MCCB 6-22NGB3B060B MCCB 6-22NGB3B070B MCCB 6-22NGB3B080B MCCB 6-22NGB3B090B MCCB 6-22NGB3B100B MCCB 6-22NGB3B110B MCCB 6-22NGB3B125B MCCB 6-22NGG1B015L MCCB 6-30NGG1B020L MCCB 6-30NGG1B025L MCCB 6-30NGG1B030L MCCB 6-30NGG1B035L MCCB 6-30NGG1B040L MCCB 6-30NGG1B045L MCCB 6-30NGG1B050L MCCB 6-30NGG1B060L MCCB 6-30NGG1B070L MCCB 6-30NGG1B080L MCCB 6-30NGG1B090L MCCB 6-30NGG1B100L MCCB 6-30NGG1B110L MCCB 6-30NGG1B125L MCCB 6-30NGG2B015L MCCB 6-30NGG2B020L MCCB 6-30NGG2B025L MCCB 6-30NGG2B030L MCCB 6-30NGG2B035L MCCB 6-30NGG2B040L MCCB 6-30NGG2B045L MCCB 6-30NGG2B050L MCCB 6-30NGG2B060L MCCB 6-30NGG2B070L MCCB 6-30NGG2B080L MCCB 6-30NGG2B090L MCCB 6-30NGG2B100L MCCB 6-30NGG2B110L MCCB 6-30NGG2B125L MCCB 6-30NGG3B015L MCCB 6-30NGG3B020L MCCB 6-30NGG3B025L MCCB 6-30NGG3B030L MCCB 6-30NGG3B035L MCCB 6-30NGG3B040L MCCB 6-30NGG3B045L MCCB 6-30NGG3B050L MCCB 6-30NGG3B060L MCCB 6-30NGG3B070L MCCB 6-30NGG3B080L MCCB 6-30NGG3B090L MCCB 6-30NGG3B100L MCCB 6-30NGG3B110L MCCB 6-30NGG3B125L MCCB 6-30NGSD060 6-138NGSF100 6-138NGSF100 6-138NGSF150 6-138NGSF150 6-138NGSJ250 6-138NGSJ250 6-139NGSL400 6-139NGSL400 6-139NGSM600 MCCB 6-139NGSM600 MCCB 6-139NGSN800 MCCB 6-139NGSN800 MCCB 6-139NGSP120 MCCB 6-139NGSP120 MCCB 6-139NGSP160 MCCB 6-139NJG2B250L 6-105NJG2B300L 6-105NJG2B350L 6-105NJG2B400L 6-105NJG2F400 MCCB 6-105NJG3B250L 6-105NJG3B300L 6-105NJG3B350L 6-105NJG3B400L 6-105NJG3D250L 6-106NJG3D400L 6-106NJG3E250L 6-106NJG3E400L 6-106NJG3F400 MCCB 6-105NJG3F400 MCCB 6-106NJG3F400 MCCB 6-106NJG3N250L 6-106NJG3N400L 6-106NJG3P250L 6-106NJG3P400L 6-106NJG3U250L 6-106NJG3U400L 6-106NJG3X250L 6-106NJG3X400L 6-106NJG4B250L 6-105NJG4B300L 6-105NJG4B350L 6-105NJG4B400L 6-105NJG4F400 6-105NJJ2B250L 6-105NJJ2B300L 6-105NJJ2B350L 6-105NJJ2B400L 6-105NJJ3B250L 6-105NJJ3B300L 6-105NJJ3B350L 6-105NJJ3B400L 6-105NLG2B400L 6-109NLG2B500L 6-109NLG2B600L 6-109NLG2F600 MCCB 6-109NLG3B400L 6-109NLG3B500L 6-109NLG3B600L 6-109NLG3D400L 6-110NLG3D600L 6-110NLG3E400L 6-110NLG3E600L 6-110NLG3F600 MCCB 6-109NLG3F600 MCCB 6-110NLG3F600 MCCB 6-110NLG3N400L 6-110NLG3N600L 6-110NLG3P400L 6-110NLG3P600L 6-110NLG3U400L 6-110NLG3U600L 6-110NLG3X400L 6-110NLG3X600L 6-110NMG2B600L 6-113NMG2B700L 6-113NMG2B800L 6-113NMG2F800 6-113NMG3B600L 6-113NMG3B700L 6-113NMG3B800L 6-113NMG3D600L 6-114NMG3D800L 6-114NMG3E600L 6-114NMG3E800L 6-114NMG3F800 6-113NMG3F800 6-114NMG3F800 6-114NMG3N600L 6-114NMG3N800L 6-114NMG3P600L 6-114NMG3P800L 6-114NMG3U600L 6-114NMG3U800L 6-114NMG3X600L 6-114NMG3X800L 6-114NMG4F800 6-114NMG4N600L 6-114NMG4N800L 6-114NMG4P600L 6-114NMG4P800L 6-114NMG4U600L 6-114NMG4U800L 6-114NMG4X600L 6-114NMG4X800L 6-114NNG2B100L 6-117NNG2B120L 6-117NNG2B800L 6-117NNG2B900L 6-117NNG2F120 6-117NNG3B100L 6-117NNG3B120L 6-117NNG3B800L 6-117NNG3B900L 6-117NNG3D100L 6-118NNG3D120L 6-118NNG3D800L 6-118NNG3E100L 6-118NNG3E120L 6-118NNG3E800L 6-118NNG3F120 6-117NNG3F120 6-118NNG3F120 6-118NNG3N100L 6-118NNG3N120L 6-118NNG3N800L 6-118NNG3P100L 6-118NNG3P120L 6-118NNG3P800L 6-118NNG3U100L 6-118NNG3U120L 6-118NNG3U800L 6-118NNG3X100L 6-118NNG3X120L 6-118NNG3X800L 6-118NNG4F120 6-118NNG4N100L 6-118NNG4N120L 6-118NNG4N800L 6-118NNG4P100L 6-118NNG4P120L 6-118NNG4P800L 6-118NNG4U100L 6-118NNG4U120L 6-118NNG4U800L 6-118NNG4X100L 6-118NNG4X120L 6-118NNG4X800L 6-118NPG3B120 6-120NPG3B140 6-120NPG3B160 6-120NPG3D120 6-121NPG3D160 6-121NPG3E120 6-121NPG3E160 6-121NPG3F160 6-120NPG3F160 6-121NPG3F160 6-121NPG3N120 6-121NPG3N160 6-121NPG3P120 6-121NPG3P160 6-121NPG3U120 6-121NPG3U160 6-121NPG3X120 6-121NPG3X160 6-121NPG4F160 6-121NPG4N120 6-121NPG4N160 6-121NPG4P120 6-121NPG4P160 6-121NPG4U120 6-121NPG4U160 6-121NPG4X120 6-121NPG4X160 6-121NSK400 RESG 2-74NSK400 RESG 2-81NSK600 RESG 2-74NSK600 RESG 2-81NXD62B100 MCCB 6-55NXD62B120 MCCB 6-55NXD62B900 MCCB 6-55NXD63B100 MCCB 6-55NXD63B120 MCCB 6-55NXD63B900 MCCB 6-55NXD63S120A MCCB 6-72OFCK620 HDSS 4-11OFCK620 HDSS 4-11OFCK620 HDSS 4-11OFCK620 HDSS 4-11OFCK661 HDSS 4-11OFCK661 HDSS 4-11OFCK661 HDSS 4-11OFCK661 HDSS 4-11OH9498 MCCB 6-8819-12Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory PageP137RT2B RESG 1-40P137RTP RESG 1-40P137TP RESG 1-40P137U2B RESG 1-40P137UP RESG 1-40P137US RESG 1-40P177RBS RESG 1-40P17RBS RESG 1-40P17US RESG 1-40P1A18BL100ATS 10-18P1A18FX250ATS 10-18P1A18JX400ATS 10-18P1A18MC250A UNPB 10-10P1A18MC250C UNPB 10-10P1A18MC400A UNPB 10-10P1A18MC400C UNPB 10-10P1A18ML125ATS 10-18P1A18ML250ATS 10-18P1A18ML400ATS 10-18P1A18NB125ATS 10-18P1A18QJ225ATS 10-18P1A30BL100ATS 10-18P1A30FX250ATS 10-18P1A30JX400ATS 10-18P1A30MC250A UNPB 10-10P1A30MC250C UNPB 10-10P1A30MC400A UNPB 10-10P1A30MC400C UNPB 10-10P1A30ML125ATS 10-18P1A30ML250ATS 10-18P1A30ML400ATS 10-18P1A30NB125ATS 10-18P1A30QJ225ATS 10-18P1A42BL100ATS 10-18P1A42FX250ATS 10-18P1A42JX400ATS 10-18P1A42MC250A UNPB 10-10P1A42MC250C UNPB 10-10P1A42MC400A UNPB 10-10P1A42MC400C UNPB 10-10P1A42ML125ATS 10-18P1A42ML250ATS 10-18P1A42ML400ATS 10-18P1A42NB125ATS 10-18P1A42QJ225ATS 10-18P1C18BL100ATS 10-18P1C18FX250ATS 10-18P1C18ML125ATS 10-18P1C18ML250ATS 10-18P1C18ML400ATS 10-18P1C18NB125ATS 10-18P1C18QJ225ATS 10-18P1C30BL100ATS 10-18P1C30FX250ATS 10-18P1C30JX400ATS 10-18P1C30ML125ATS 10-18P1C30ML250ATS 10-18P1C30ML400ATS 10-18P1C30NB125ATS 10-18P1C30QJ225ATS 10-18P1C42BL100ATS 10-18P1C42FX250ATS 10-18P1C42FX250ATS 10-18P1C42JX400ATS 10-18P1C42ML125ATS 10-18P1C42ML250ATS 10-18P1C42ML400ATS 10-18P1C42NB125ATS 10-18P1C42QJ225ATS 10-18P1E18BD100ATS 10-18P1E18FX225ATS 10-18P1E18FX250ATS 10-18P1E18JX400ATS 10-18P1E18MC250A UNPB 10-10P1E18MC250C UNPB 10-10P1E18MC400A UNPB 10-10P1E18MC400C UNPB 10-10P1E18ML125ATS 10-18P1E18ML250ATS 10-18P1E18ML400ATS 10-18P1E18NB125ATS 10-18P1E30BD100ATS 10-18P1E30FX225ATS 10-18P1E30FX250ATS 10-18P1E30JX400ATS 10-18P1E30MC250A UNPB 10-10P1E30MC250C UNPB 10-10P1E30MC400A UNPB 10-10P1E30MC400C UNPB 10-10P1E30ML125ATS 10-18P1E30ML250ATS 10-18P1E30ML400ATS 10-18P1E30NB125ATS 10-18P1E42BD100ATS 10-18P1E42FX225ATS 10-18P1E42FX250ATS 10-18P1E42JX400ATS 10-18P1E42MC250A UNPB 10-10P1E42MC250C UNPB 10-10P1E42MC400A UNPB 10-10P1E42MC400C UNPB 10-10P1E42ML125ATS 10-18P1E42ML250ATS 10-18P1E42ML400ATS 10-18P1E42NB125ATS 10-18P1F37UML RESG 1-40P1F77RBS RESG 1-40P1F7RTS RESG 1-40P1F7TS RESG 1-40P1F7US RESG 1-40P1X18MC250A UNPB 10-10P1X18MC250C UNPB 10-10P1X18MC400A UNPB 10-10P1X18MC400C UNPB 10-10P1X30MC250A UNPB 10-10P1X30MC250C UNPB 10-10P1X30MC400A UNPB 10-10P1X30MC400C UNPB 10-10P1X42MC250A UNPB 10-10P1X42MC250C UNPB 10-10P1X42MC400A UNPB 10-10P1X42MC400C UNPB 10-10P2A18BL100ATS 10-27P2A18FX250ATS 10-27P2A18JX400ATS 10-27P2A18LX600ATS 10-27P2A18ML125ATS 10-27P2A18ML250ATS 10-27P2A18ML400ATS 10-27P2A18ML600ATS 10-27P2A18NB125ATS 10-27P2A18QJ225ATS 10-27P2A30BL100ATS 10-27P2A30FX250ATS 10-27P2A30JX400ATS 10-27P2A30LX600ATS 10-27P2A30ML125ATS 10-27P2A30ML250ATS 10-27P2A30ML400ATS 10-27P2A30ML600ATS 10-27P2A30NB125ATS 10-27P2A30QJ225ATS 10-27P2A42BL100ATS 10-27P2A42FX250ATS 10-27P2A42JX400ATS 10-27P2A42LX600ATS 10-27P2A42ML125ATS 10-27P2A42ML250ATS 10-27P2A42ML400ATS 10-27P2A42ML600ATS 10-27P2A42NB125ATS 10-27P2A42QJ225ATS 10-27P2A54JX400ATS 10-27P2A54LX600ATS 10-27P2A54ML400ATS 10-27P2A54ML600ATS 10-27P2BK1 PBSB 10-31P2BK2 PBSB 10-31P2BK3 PBSB 10-31P2C18BL100ATS 10-27P2C18FX250ATS 10-27P2C18JX400ATS 10-27P2C18LX600ATS 10-27P2C18ML125ATS 10-27P2C18ML250ATS 10-27P2C18ML400ATS 10-27P2C18ML600ATS 10-27P2C18NB125ATS 10-27P2C18QJ225ATS 10-27P2C30BL100ATS 10-27P2C30FX250ATS 10-27P2C30JX400ATS 10-27P2C30LX600ATS 10-27P2C30ML125ATS 10-27P2C30ML250ATS 10-27P2C30ML400ATS 10-27P2C30ML600ATS 10-27P2C30NB125ATS 10-27P2C30QJ225ATS 10-27P2C42BL100ATS 10-27P2C42FX250ATS 10-27P2C42JX400ATS 10-27P2C42LX600ATS 10-27P2C42ML125ATS 10-27P2C42ML250ATS 10-27P2C42ML400ATS 10-27P2C42ML600ATS 10-27P2C42NB125ATS 10-27P2C42QJ225ATS 10-27P2C54JX400ATS 10-27P2C54LX600ATS 10-27P2C54ML400ATS 10-27P2C54ML600ATS 10-27P2E18BQ100ATS 10-27P2E18FX225ATS 10-27P2E18FX250ATS 10-27P2E18JX400ATS 10-27P2E18LX600ATS 10-27P2E18ML125ATS 10-27P2E18ML250ATS 10-27P2E18ML400ATS 10-27P2E18ML600ATS 10-27P2E18NB125ATS 10-27P2E30BQ100ATS 10-27P2E30FX225ATS 10-27P2E30FX250ATS 10-27P2E30JX400ATS 10-27P2E30LX600ATS 10-27P2E30ML125ATS 10-27P2E30ML250ATS 10-27P2E30ML400ATS 10-27P2E30ML600ATS 10-27P2E30NB125ATS 10-27P2E42BQ100ATS 10-27P2E42FX225ATS 10-27P2E42FX250ATS 10-27P2E42JX400ATS 10-27P2E42LX600ATS 10-27P2E42ML125ATS 10-27P2E42ML250ATS 10-27P2E42ML400ATS 10-27P2E42ML600ATS 10-27P2E42NB125ATS 10-27P2E54JX400ATS 10-27P2E54LX600ATS 10-27P2E54ML400ATS 10-27P2E54ML600ATS 10-27P30EMS PILO 16-218P37UP RESG 1-40P37US RESG 1-40P3A56FD250ATS 10-38P3A56JD400ATS 10-38P3A56LD600ATS 10-38P3A56ML250ATS 10-37P3A56ML400ATS 10-37P3A56ML600ATS 10-37P3A56ML800ATS 10-37P3A62FD250ATS 10-38P3A62JD400ATS 10-38P3A62LD600ATS 10-38P3A62ML250ATS 10-37P3A62ML400ATS 10-37P3A62ML600ATS 10-37P3A62ML800ATS 10-37P3A68FD250ATS 10-38P3A68JD400ATS 10-38P3A68LD600ATS 10-38P3A68ML250ATS 10-37P3A68ML400ATS 10-37P3A68ML600ATS 10-37P3A68ML800ATS 10-37P3A74FD250ATS 10-38P3A74JD400ATS 10-38P3A74LD600ATS 10-38P3A74ML250ATS 10-37P3A74ML400ATS 10-37P3A74ML600ATS 10-37P3A74ML800ATS 10-37P3A80FD250ATS 10-38P3A80JD400ATS 10-38P3A80LD600ATS 10-38P3A80ML250ATS 10-37P3A80ML400ATS 10-37P3A80ML600ATS 10-37P3A80ML800ATS 10-37P3B56FD250ATS 10-38P3B56JD400ATS 10-38P3B56LD600ATS 10-38P3B56ML250ATS 10-37P3B56ML400ATS 10-37P3B56ML600ATS 10-37P3B56ML800ATS 10-37P3B62FD250ATS 10-38P3B62JD400ATS 10-38P3B62LD600ATS 10-38P3B62ML250ATS 10-37P3B62ML400ATS 10-37P3B62ML600ATS 10-37P3B62ML800ATS 10-37P3B68FD250ATS 10-38P3B68JD400ATS 10-38P3B68LD600ATS 10-38P3B68ML250ATS 10-37P3B68ML400ATS 10-37P3B68ML600ATS 10-37P3B68ML800ATS 10-37P3B74FD250ATS 10-38P3B74JD400ATS 10-38P3B74LD600ATS 10-38P3B74ML250ATS 10-37P3B74ML400ATS 10-37P3B74ML600ATS 10-37P3B74ML800ATS 10-37P3B80FD250ATS 10-38P3B80JD400ATS 10-38P3B80LD600ATS 10-38P3B80ML250ATS 10-37P3B80ML400ATS 10-37P3B80ML600ATS 10-37P3B80ML800ATS 10-37P3BK1 PBSB 10-42P3C56FD250ATS 10-38P3C56JD400ATS 10-38P3C56LD600ATS 10-38P3C56ML250ATS 10-37P3C56ML400ATS 10-37P3C56ML600ATS 10-37P3C56ML800ATS 10-37P3C62FD250ATS 10-38P3C62JD400ATS 10-38P3C62LD600ATS 10-38P3C62ML250ATS 10-37P3C62ML400ATS 10-37P3C62ML600ATS 10-37P3C62ML800ATS 10-37P3C68FD250ATS 10-38P3C68JD400ATS 10-38P3C68LD600ATS 10-38P3C68ML250ATS 10-37P3C68ML400ATS 10-37P3C68ML600ATS 10-37P3C68ML800ATS 10-37P3C74FD250ATS 10-38P3C74JD400ATS 10-38P3C74LD600ATS 10-38P3C74ML250ATS 10-37P3C74ML400ATS 10-37P3C74ML600ATS 10-37P3C74ML800ATS 10-37P3C80FD250ATS 10-38P3C80JD400ATS 10-38P3C80LD600ATS 10-38P3C80ML250ATS 10-37P3C80ML400ATS 10-37P3C80ML600ATS 10-37P3C80ML800ATS 10-37P3D56FD250ATS 10-38P3D56JD400ATS 10-38P3D56LD600ATS 10-38P3D56ML250ATS 10-37P3D56ML400ATS 10-37P3D56ML600ATS 10-37P3D56ML800ATS 10-37P3D62FD250ATS 10-38P3D62JD400ATS 10-38P3D62LD600ATS 10-38P3D62ML250ATS 10-37P3D62ML400ATS 10-37P3D62ML600ATS 10-37P3D62ML800ATS 10-37P3D68FD250ATS 10-38P3D68JD400ATS 10-38P3D68LD600ATS 10-38P3D68ML250ATS 10-37P3D68ML400ATS 10-37P3D68ML600ATS 10-37P3D68ML800ATS 10-37P3D74FD250ATS 10-38P3D74JD400ATS 10-38P3D74LD600ATS 10-38P3D74ML250ATS 10-37P3D74ML400ATS 10-37P3D74ML600ATS 10-37P3D74ML800ATS 10-37P3D80FD250ATS 10-38P3D80JD400ATS 10-38P3D80LD600ATS 10-38P3D80ML250ATS 10-37P3D80ML400ATS 10-37P3D80ML600ATS 10-37P3D80ML800ATS 10-37P3E56FD250ATS 10-38P3E56JD400ATS 10-38P3E56LD600ATS 10-38P3E56ML250ATS 10-37P3E56ML400ATS 10-37P3E56ML600ATS 10-37P3E56ML800ATS 10-37P3E62FD250ATS 10-38P3E62JD400ATS 10-38P3E62LD600ATS 10-38P3E62ML250ATS 10-37P3E62ML400ATS 10-37P3E62ML600ATS 10-37P3E62ML800ATS 10-37P3E68FD250ATS 10-38P3E68JD400ATS 10-38P3E68LD600ATS 10-38P3E68ML250ATS 10-37P3E68ML400ATS 10-37P3E68ML600ATS 10-37P3E68ML800ATS 10-37P3E74FD250ATS 10-38P3E74JD400ATS 10-38P3E74LD600ATS 10-38P3E74ML250ATS 10-37P3E74ML400ATS 10-37P3E74ML600ATS 10-37P3E74ML800ATS 10-37P3E80FD250ATS 10-38P3E80JD400ATS 10-38P3E80LD600ATS 10-38P3E80ML250ATS 10-37P3E80ML400ATS 10-37P3E80ML600ATS 10-37P3E80ML800ATS 10-37P3F56FD250ATS 10-38P3F56JD400ATS 10-38P3F56LD600ATS 10-38P3F56ML250ATS 10-37P3F56ML400ATS 10-37P3F56ML600ATS 10-37P3F56ML800ATS 10-37P3F62FD250ATS 10-38P3F62JD400ATS 10-38P3F62LD600ATS 10-38P3F62ML250ATS 10-37P3F62ML400ATS 10-37P3F62ML600ATS 10-37P3F62ML800ATS 10-37P3F68FD250ATS 10-38P3F68JD400ATS 10-38P3F68LD600ATS 10-38P3F68ML250ATS 10-37P3F68ML400ATS 10-37P3F68ML600ATS 10-37P3F68ML800ATS 10-37P3F74FD250ATS 10-38P3F74JD400ATS 10-38P3F74LD600ATS 10-38P3F74ML250ATS 10-37P3F74ML400ATS 10-37P3F74ML600ATS 10-37P3F74ML800ATS 10-37P3F80FD250ATS 10-38P3F80JD400ATS 10-38P3F80LD600ATS 10-38P3F80ML250ATS 10-37P3F80ML400ATS 10-37P3F80ML600ATS 10-37P3F80ML800ATS 10-37P4A60JX400ATS 10-47P4A60LX600ATS 10-47P4A60M1800ATS 10-47P4A60ML101ATS 10-47P4A60ML120ATS 10-47P4A60ML400ATS 10-47P4A60ML600ATS 10-47P4A60ML800ATS 10-47P4A60MS100ATS 10-4819 PRODUCTINDEXSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 19-13

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory Page19PRODUCTINDEXP4A60MS200ATS 10-48P4A75JX400ATS 10-47P4A75LX600ATS 10-47P4A75M1800ATS 10-47P4A75ML101ATS 10-47P4A75ML120ATS 10-47P4A75ML400ATS 10-47P4A75ML600ATS 10-47P4A75ML800ATS 10-47P4A75MS100ATS 10-48P4A75MS200ATS 10-48P4A90JX400ATS 10-47P4A90LX600ATS 10-47P4A90M1800ATS 10-47P4A90ML101ATS 10-47P4A90ML120ATS 10-47P4A90ML400ATS 10-47P4A90ML600ATS 10-47P4A90ML800ATS 10-47P4B60JX400ATS 10-47P4B60LX600ATS 10-47P4B60M1800ATS 10-47P4B60ML101ATS 10-47P4B60ML120ATS 10-47P4B60ML400ATS 10-47P4B60ML600ATS 10-47P4B60ML800ATS 10-47P4B60MS100ATS 10-48P4B60MS200ATS 10-48P4B75JX400ATS 10-47P4B75LX600ATS 10-47P4B75M1800ATS 10-47P4B75ML101ATS 10-47P4B75ML120ATS 10-47P4B75ML400ATS 10-47P4B75ML600ATS 10-47P4B75ML800ATS 10-47P4B75MS100ATS 10-48P4B75MS200ATS 10-48P4B90JX400ATS 10-47P4B90LX600ATS 10-47P4B90M1800ATS 10-47P4B90ML101ATS 10-47P4B90ML120ATS 10-47P4B90ML400ATS 10-47P4B90ML600ATS 10-47P4B90ML800ATS 10-47P4C60JX400ATS 10-47P4C60LX600ATS 10-47P4C60M1800ATS 10-47P4C60ML101ATS 10-47P4C60ML120ATS 10-47P4C60ML400ATS 10-47P4C60ML600ATS 10-47P4C60ML800ATS 10-47P4C60MS100ATS 10-48P4C60MS200ATS 10-48P4C75JX400ATS 10-47P4C75LX600ATS 10-47P4C75M1800ATS 10-47P4C75ML101ATS 10-47P4C75ML120ATS 10-47P4C75ML400ATS 10-47P4C75ML600ATS 10-47P4C75ML800ATS 10-47P4C75MS100ATS 10-48P4C75MS200ATS 10-48P4C90JX400ATS 10-47P4C90LX600ATS 10-47P4C90M1800ATS 10-47P4C90ML101ATS 10-47P4C90ML120ATS 10-47P4C90ML400ATS 10-47P4C90ML600ATS 10-47P4C90ML800ATS 10-47P4D60JX400ATS 10-47P4D60LX600ATS 10-47P4D60M1800ATS 10-47P4D60ML101ATS 10-47P4D60ML120ATS 10-47P4D60ML400ATS 10-47P4D60ML600ATS 10-47P4D60ML800ATS 10-47P4D60MS100ATS 10-48P4D60MS200ATS 10-48P4D75JX400ATS 10-47P4D75LX600ATS 10-47P4D75M1800ATS 10-47P4D75ML101ATS 10-47P4D75ML120ATS 10-47P4D75ML400ATS 10-47P4D75ML600ATS 10-47P4D75ML800ATS 10-47P4D75MS100ATS 10-48P4D75MS200ATS 10-48P4D90JX400ATS 10-47P4D90LX600ATS 10-47P4D90M1800ATS 10-47P4D90ML101ATS 10-47P4D90ML120ATS 10-47P4D90ML400ATS 10-47P4D90ML600ATS 10-47P4D90ML800ATS 10-47P4E60JX400ATS 10-47P4E60LX600ATS 10-47P4E60M1800ATS 10-47P4E60ML101ATS 10-47P4E60ML120ATS 10-47P4E60ML400ATS 10-47P4E60ML600ATS 10-47P4E60ML800ATS 10-47P4E60MS100ATS 10-48P4E60MS200ATS 10-48P4E75JX400ATS 10-47P4E75LX600ATS 10-47P4E75M1800ATS 10-47P4E75ML101ATS 10-47P4E75ML120ATS 10-47P4E75ML400ATS 10-47P4E75ML600ATS 10-47P4E75ML800ATS 10-47P4E75MS100ATS 10-48P4E75MS200ATS 10-48P4E90JX400ATS 10-47P4E90LX600ATS 10-47P4E90M1800ATS 10-47P4E90ML101ATS 10-47P4E90ML120ATS 10-47P4E90ML400ATS 10-47P4E90ML600ATS 10-47P4E90ML800ATS 10-47P4F60JX400ATS 10-47P4F60LX600ATS 10-47P4F60M1800ATS 10-47P4F60ML101ATS 10-47P4F60ML120ATS 10-47P4F60ML400ATS 10-47P4F60ML600ATS 10-47P4F60ML800ATS 10-47P4F60MS100ATS 10-48P4F60MS200ATS 10-48P4F75JX400ATS 10-47P4F75LX600ATS 10-47P4F75M1800ATS 10-47P4F75ML101ATS 10-47P4F75ML120ATS 10-47P4F75ML400ATS 10-47P4F75ML600ATS 10-47P4F75ML800ATS 10-47P4F75MS100ATS 10-48P4F75MS200ATS 10-48P4F90JX400ATS 10-47P4F90LX600ATS 10-47P4F90M1800ATS 10-47P4F90ML101ATS 10-47P4F90ML120ATS 10-47P4F90ML400ATS 10-47P4F90ML600ATS 10-47P4F90ML800ATS 10-47P577TS RESG 1-40P577US RESG 1-40P5A60M1800ATS 10-57P5A60ML101ATS 10-57P5A60ML120ATS 10-57P5A60ML800ATS 10-57P5A60N1120ATS 10-57P5A75M1800ATS 10-57P5A75ML101ATS 10-57P5A75ML120ATS 10-57P5A75ML800ATS 10-57P5A75MS120ATS 10-58P5A75MS400ATS 10-58P5A75MS600ATS 10-58P5A75MS800ATS 10-58P5A75N1120ATS 10-57P5A90M1800ATS 10-57P5A90ML101ATS 10-57P5A90ML120ATS 10-57P5A90ML800ATS 10-57P5A90MS120ATS 10-58P5A90MS400ATS 10-58P5A90MS600ATS 10-58P5A90MS800ATS 10-58P5A90N1120ATS 10-57P5B60M1800ATS 10-57P5B60ML101ATS 10-57P5B60ML120ATS 10-57P5B60ML800ATS 10-57P5B60N1120ATS 10-57P5B75M1800ATS 10-57P5B75ML101ATS 10-57P5B75ML120ATS 10-57P5B75ML800ATS 10-57P5B75MS120ATS 10-58P5B75MS400ATS 10-58P5B75MS600ATS 10-58P5B75MS800ATS 10-58P5B75N1120ATS 10-57P5B90M1800ATS 10-57P5B90ML101ATS 10-57P5B90ML120ATS 10-57P5B90ML800ATS 10-57P5B90MS120ATS 10-58P5B90MS400ATS 10-58P5B90MS600ATS 10-58P5B90MS800ATS 10-58P5B90N1120ATS 10-57P5C60M1800ATS 10-57P5C60ML101ATS 10-57P5C60ML120ATS 10-57P5C60ML800ATS 10-57P5C60N1120ATS 10-57P5C75M1800ATS 10-57P5C75ML101ATS 10-57P5C75ML120ATS 10-57P5C75ML800ATS 10-57P5C75MS120ATS 10-58P5C75MS400ATS 10-58P5C75MS600ATS 10-58P5C75MS800ATS 10-58P5C75N1120ATS 10-57P5C90M1800ATS 10-57P5C90ML101ATS 10-57P5C90ML120ATS 10-57P5C90ML800ATS 10-57P5C90MS120ATS 10-58P5C90MS400ATS 10-58P5C90MS600ATS 10-58P5C90MS800ATS 10-58P5C90N1120ATS 10-57P5D60M1800ATS 10-57P5D60ML101ATS 10-57P5D60ML120ATS 10-57P5D60ML800ATS 10-57P5D60N1120ATS 10-57P5D75M1800ATS 10-57P5D75ML101ATS 10-57P5D75ML120ATS 10-57P5D75ML800ATS 10-57P5D75MS120ATS 10-58P5D75MS400ATS 10-58P5D75MS600ATS 10-58P5D75MS800ATS 10-58P5D75N1120ATS 10-57P5D90M1800ATS 10-57P5D90ML101ATS 10-57P5D90ML120ATS 10-57P5D90ML800ATS 10-57P5D90MS120ATS 10-58P5D90MS400ATS 10-58P5D90MS600ATS 10-58P5D90MS800ATS 10-58P5D90N1120ATS 10-57P5E60M1800ATS 10-57P5E60ML101ATS 10-57P5E60ML120ATS 10-57P5E60ML800ATS 10-57P5E60N1120ATS 10-57P5E75M1800ATS 10-57P5E75ML101ATS 10-57P5E75ML120ATS 10-57P5E75ML800ATS 10-57P5E75MS120ATS 10-58P5E75MS400ATS 10-58P5E75MS600ATS 10-58P5E75MS800ATS 10-58P5E75N1120ATS 10-57P5E90M1800ATS 10-57P5E90ML101ATS 10-57P5E90ML120ATS 10-57P5E90ML800ATS 10-57P5E90MS120ATS 10-58P5E90MS400ATS 10-58P5E90MS600ATS 10-58P5E90MS800ATS 10-58P5E90N1120ATS 10-57P5F60M1800ATS 10-57P5F60ML101ATS 10-57P5F60ML120ATS 10-57P5F60ML800ATS 10-57P5F60N1120ATS 10-57P5F75M1800ATS 10-57P5F75ML101ATS 10-57P5F75ML120ATS 10-57P5F75ML800ATS 10-57P5F75MS120ATS 10-58P5F75MS400ATS 10-58P5F75MS600ATS 10-58P5F75MS800ATS 10-58P5F75N1120ATS 10-57P5F77RBS RESG 1-40P5F7TS RESG 1-40P5F90M1800ATS 10-57P5F90ML101ATS 10-57P5F90ML120ATS 10-57P5F90ML800ATS 10-57P5F90MS120ATS 10-58P5F90MS400ATS 10-58P5F90MS600ATS 10-58P5F90MS800ATS 10-58P5F90N1120ATS 10-57P77BS RESG 1-40P77RBS RESG 1-40P77RTS RESG 1-40P77TS RESG 1-40P77US RESG 1-40PAKMCVRL 2-82PAKMCVRR 2-82PB224 SWBD 12-20PB226 SWBD 12-20PB228 SWBD 12-20PB424 SWBD 12-20PB426 SWBD 12-20PB428 SWBD 12-20PB444 SWBD 12-20PB446 SWBD 12-20PB448 SWBD 12-20PBP32 SWBD 12-23PC2637 MCCB 6-91PC2637 MCCB 6-91PC2638 MCCB 6-91PC2638 MCCB 6-91PC2657 MCCB 6-91PC2657 MCCB 6-91PC2658 MCCB 6-91PC2658 MCCB 6-91PC4753 MCCB 6-91PC4753 MCCB 6-91PC4753 MCCB 6-91PC4753 MCCB 6-91PC4754 MCCB 6-91PC4754 MCCB 6-91PC4754 MCCB 6-91PC4754 MCCB 6-91PC5660 MCCB 6-91PC5660 MCCB 6-91PC5661 MCCB 6-91PC5661 MCCB 6-91PC5662 MCCB 6-91PC5662 MCCB 6-91PC5663 MCCB 6-91PC5663 MCCB 6-91PC5664 6-91PC5664 6-91PC5666 MCCB 6-91PC5666 MCCB 6-91PC5777 MCCB 6-91PC5777 MCCB 6-91PC5778 MCCB 6-91PC5778 MCCB 6-91PCAF390 6-130PCAF390 6-130PCBDFC3 6-130PCBDRC3 6-130PCBERC3 6-91PCBERC4 6-91PCBFFC3 6-130PCBFRC3 6-130PCBJFC3 6-131PCBJRC3 6-131PCBLFC3 6-131PCBLRC3 6-131PCBMRC3 6-131PCBNRC3 6-131PCCJD MCCB 6-91PCCJD MCCB 6-91PCCLD 6-91PCCLD 6-91PCTF83 6-130PCTF83 6-130PCTL83 6-131PCTL83 6-131PCTM83 6-131PCTP83 6-131PCTP83 6-131PCXD3 6-130PCXF3 6-130PCXFT 6-130PCXFT 6-130PCXJ3 6-131PCXL3 6-131PCXLT 6-131PCXLT 6-131PCXM3 6-131PCXMT 6-131PCXN3 6-131PCXPT 6-131PCXPT 6-131PD63B120 MCCB 6-59PD63B140 MCCB 6-59PD63B160 MCCB 6-59PD63F160 MCCB 6-59PD63T120 MCCB 6-59PD63T120 MCCB 6-59PD63T140 MCCB 6-59PD63T140 MCCB 6-59PD63T160 MCCB 6-59PD63T160 MCCB 6-59PE4630 SWBD 12-22PE4840 SWBD 12-22PEGB42 SWBD 12-23PF224 SWBD 12-21PF226 SWBD 12-21PF424 SWBD 12-21PF426 SWBD 12-21PF444 SWBD 12-21PF446 SWBD 12-21PF4606 SWBD 12-22PF4809 SWBD 12-22PLK400 RESG 2-74PLK400 RESG 2-81PLK600 RESG 2-74PLK600 RESG 2-81PLL44 SWBD 12-23PLL46 SWBD 12-23PLL48 SWBD 12-23PLW10 SWBD 12-23PMS13 SWBD 12-23PMS15 SWBD 12-23PMS5 SWBD 12-23PMS6 SWBD 12-23PMS8 SWBD 12-23PQ2630 SWBD 12-22PQ2840 SWBD 12-22PQ4630 SWBD 12-22PQ4840 SWBD 12-22PRD6N1 5-8PRD6N1 6-60PSDP32 SWBD 12-23PSFFJ6 SWBD 12-22PSFJL6 SWBD 12-22PSP32 SWBD 12-23PTE 12-24PUG14 SWBD 12-23PUG26 SWBD 12-23PXD63B120 MCCB 6-59PXD63B140 MCCB 6-59PXD63B160 MCCB 6-59PXD63S160A MCCB 6-72Q110 RESI 1-24Q115 RESI 1-24Q115AF RESI 1-26Q115AFH RESI 1-26Q115H RESI 1-24Q115HH RESI 1-24Q115HID RESI 1-27Q115T RESI 1-27Q120 RESI 1-24Q120AF RESI 1-26Q120AFH RESI 1-2619-14Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory PageQ120H RESI 1-24Q120HH RESI 1-24Q120HID RESI 1-27Q120T 1-27Q125 RESI 1-24Q125H RESI 1-24Q125HH RESI 1-24Q130 RESI 1-24Q130H RESI 1-24Q130HH RESI 1-24Q130HID RESI 1-27Q135 RESI 1-24Q135H RESI 1-24Q135HH RESI 1-24Q140 RESI 1-24Q140H RESI 1-24Q140HH RESI 1-24Q145 RESI 1-24Q145H RESI 1-24Q145HH RESI 1-24Q150 RESI 1-24Q150H RESI 1-24Q150HH 1-24Q1515 RESI 1-25Q1515NC RESI 1-25Q1520 RESI 1-25Q1520NC RESI 1-25Q160 RESI 1-24Q160H RESI 1-24Q160HH RESI 1-24Q170 RESI 1-24Q170H RESI 1-24Q170HH RESI 1-24Q2020 RESI 1-25Q2020NC RESI 1-25Q2030 RESI 1-25Q210 RESI 1-24Q2100 RESI 1-24Q2100H RESI 1-24Q2100HH RESI 1-24Q2100R RESI 1-24Q2110 RESI 1-24Q2110H RESI 1-24Q2110HH RESI 1-24Q2125 RESI 1-24Q2125B RESI 1-29Q2125BH RESI 1-29Q2125BHH RESI 1-29Q2125H RESI 1-24Q2125HH RESI 1-24Q215 RESI 1-24Q2150B RESI 1-29Q2150BH RESI 1-29Q2150BHH RESI 1-29Q21515CT RESI 1-25Q21515CT2 RESI 1-25Q21520CT RESI 1-25Q21525CT RESI 1-25Q21530CT RESI 1-25Q21535CT RESI 1-25Q21540CT RESI 1-25Q21545CT RESI 1-25Q21550CT RESI 1-25Q215AF RESI 1-26Q215AFH RESI 1-26Q215H RESI 1-24Q215HH RESI 1-24Q215HID RESI 1-27Q215R RESI 1-24Q2175B RESI 1-29Q2175BH RESI 1-29Q2175BHH RESI 1-29Q220 RESI 1-24Q2200B RESI 1-29Q2200BH RESI 1-29Q2200BHH RESI 1-29Q22020CT RESI 1-25Q22020CT2 RESI 1-25Q22025CT RESI 1-25Q22030CT RESI 1-25Q22035CT RESI 1-25Q22040CT RESI 1-25Q22045CT RESI 1-25Q22050CT RESI 1-25Q220AF RESI 1-26Q220AFH RESI 1-26Q220H RESI 1-24Q220HH RESI 1-24Q220HID RESI 1-27Q220R RESI 1-24Q2225B RESI 1-29Q2225BH RESI 1-29Q2225BHH RESI 1-29Q225 RESI 1-24Q225H RESI 1-24Q225HH RESI 1-24Q230 RESI 1-24Q23020CT2 RESI 1-25Q23030CT 1-25Q23030CT2 RESI 1-25Q23050CT2 RESI 1-25Q230H RESI 1-24Q230HH RESI 1-24Q230HID RESI 1-27Q230R RESI 1-24Q230S RESI 1-27Q235 RESI 1-24Q235H RESI 1-24Q235HH RESI 1-24Q240 RESI 1-24Q24020CT2 RESI 1-25Q24030CT2 RESI 1-25Q24040CT2 RESI 1-25Q240H RESI 1-24Q240HH 1-24Q240R RESI 1-24Q245 RESI 1-24Q245H RESI 1-24Q245HH RESI 1-24Q250 RESI 1-24Q250H RESI 1-24Q250HH RESI 1-24Q250NN RESI 1-27Q250R RESI 1-24Q260 RESI 1-24Q260H RESI 1-24Q260HH RESI 1-24Q260NN RESI 1-27Q260R RESI 1-24Q260S RESI 1-27Q270 RESI 1-24Q270H RESI 1-24Q270HH RESI 1-24Q270NN RESI 1-27Q270R RESI 1-24Q280 RESI 1-24Q280H RESI 1-24Q280HH RESI 1-24Q290 RESI 1-24Q290H RESI 1-24Q290HH 1-24Q290NN 1-27Q3015 RESI 1-25Q3020 RESI 1-25Q3030 RESI 1-25Q3030NC RESI 1-25Q310 1-24Q3100 RESI 1-24Q3100H RESI 1-24Q3100HH RESI 1-24Q315 RESI 1-24Q315H RESI 1-24Q315HH RESI 1-24Q320 RESI 1-24Q320H RESI 1-24Q320HH RESI 1-24Q325 RESI 1-24Q325H RESI 1-24Q325HH 1-24Q330 RESI 1-24Q330H RESI 1-24Q330HH RESI 1-24Q335 RESI 1-24Q335H 1-24Q335HH 1-24Q340 RESI 1-24Q340H RESI 1-24Q340HH RESI 1-24Q345 RESI 1-24Q345H RESI 1-24Q345HH 1-24Q350 RESI 1-24Q350H RESI 1-24Q350HH RESI 1-24Q360 RESI 1-24Q360H RESI 1-24Q360HH RESI 1-24Q370 RESI 1-24Q370H RESI 1-24Q370HH RESI 1-24Q380 RESI 1-24Q380H RESI 1-24Q380HH 1-24Q390 RESI 1-24Q390H RESI 1-24Q390HH RESI 1-24QE115 RESI 1-26QE115H 1-26QE120 RESI 1-26QE120H RESI 1-26QE130 RESI 1-26QE130H RESI 1-26QE215 RESI 1-26QE215H RESI 1-26QE220 RESI 1-26QE220H RESI 1-26QE230 RESI 1-26QE230H 1-26QE240 RESI 1-26QE240H RESI 1-26QE250 RESI 1-26QE250H RESI 1-26QE260 RESI 1-26QE260H RESI 1-26QF115 RESI 1-26QF115H RESI 1-26QF120 RESI 1-26QF120H RESI 1-26QF125 RESI 1-26QF130 RESI 1-26QF130H RESI 1-26QF215 RESI 1-26QF215H RESI 1-26QF220 RESI 1-26QF220H RESI 1-26QF230 RESI 1-26QF230H RESI 1-26QF240 RESI 1-26QF240H RESI 1-26QF250 RESI 1-26QF250H RESI 1-26QF260 RESI 1-26QF260H RESI 1-26QF3 RESG 10-11QF3 RESG 10-50QF3 RESG 10-61QF3 RESG 12-23QF3 RESG 12-26QF3 RESG 1-35QF3 RESG 6-86QG215 RESI 1-27QG220 RESI 1-27QG230 RESI 1-27QG315 RESI 1-27QG320 RESI 1-27QG330 1-27QJ22B060 MCCB 6-28QJ22B060H MCCB 6-28QJ22B070 MCCB 6-28QJ22B070H MCCB 6-28QJ22B080 MCCB 6-28QJ22B080H MCCB 6-28QJ22B090 MCCB 6-28QJ22B090H MCCB 6-28QJ22B100 MCCB 6-28QJ22B100H MCCB 6-28QJ22B110 MCCB 6-28QJ22B110H MCCB 6-28QJ22B125 MCCB 6-28QJ22B125H MCCB 6-28QJ22B150 MCCB 6-28QJ22B150H MCCB 6-28QJ22B175 MCCB 6-28QJ22B175H MCCB 6-28QJ22B200 MCCB 6-28QJ22B200H MCCB 6-28QJ22B225 MCCB 6-28QJ22B225H MCCB 6-28QJ22S225A MCCB 6-72QJ23B060 MCCB 6-28QJ23B060H MCCB 6-28QJ23B070 MCCB 6-28QJ23B070H MCCB 6-28QJ23B080 MCCB 6-28QJ23B080H MCCB 6-28QJ23B090 MCCB 6-28QJ23B090H MCCB 6-28QJ23B100 MCCB 6-28QJ23B100H MCCB 6-28QJ23B110 MCCB 6-28QJ23B110H MCCB 6-28QJ23B125 MCCB 6-28QJ23B125H MCCB 6-28QJ23B150 MCCB 6-28QJ23B150H MCCB 6-28QJ23B175 MCCB 6-28QJ23B175H MCCB 6-28QJ23B200 MCCB 6-28QJ23B200H MCCB 6-28QJ23B225 MCCB 6-28QJ23B225H MCCB 6-28QJ23S225A MCCB 6-72QJH22B060 MCCB 6-28QJH22B070 MCCB 6-28QJH22B080 MCCB 6-28QJH22B090 MCCB 6-28QJH22B100 MCCB 6-28QJH22B110 MCCB 6-28QJH22B125 MCCB 6-28QJH22B150 MCCB 6-28QJH22B175 MCCB 6-28QJH22B200 MCCB 6-28QJH22B225 MCCB 6-28QJH23B060 MCCB 6-28QJH23B070 MCCB 6-28QJH23B080 MCCB 6-28QJH23B090 MCCB 6-28QJH23B100 MCCB 6-28QJH23B110 MCCB 6-28QJH23B125 MCCB 6-28QJH23B150 MCCB 6-28QJH23B175 MCCB 6-28QJH23B200 MCCB 6-28QJH23B225 MCCB 6-28QJHS1 MCCB 12-23QJHS1 MCCB 6-86QL1 12-23QLD3 12-23QN2150 RESI 1-29QN2150H RESI 1-29QN2150R RESI 1-29QN2150RH RESI 1-29QN2175 RESI 1-29QN2175H 1-29QN2175R RESI 1-29QN2175RH RESI 1-29QN2200 RESI 1-29QN2200H RESI 1-29QN2200R RESI 1-29QN2200RH RESI 1-29QPJ3125 RESI 1-29QPJ3150 RESI 1-29QPJ3200 RESI 1-29QSA1515 RESI 1-32QSA2020 RESI 1-32QSA2020TVSS RESI 1-32QW215 RESI 1-27QW220 RESI 1-27QW230 RESI 1-27R1224ML1125CU RESI 1-14R2040ML1125CU RESI 1-14RAG24 RESI 1-35RC(1)23B 10-71RC(1)26B 10-71RC(1)29B 10-71RC(1)32B 10-71RC(1)35B 10-71RC(1)38B 10-71RC(1)41B 10-71RC(1)44B 10-71RC(1)47B 10-71RC(1)50B 10-71RC(1)53B 10-71RC(1)56B 10-71RC(1)59B 10-71RC(1)62B 10-71RC(1)65B 10-71RC(1)68B 10-71RC(1)71B 10-71RC(1)74B 10-71RC(1)77B 10-71RCW(1)23B 10-71RCW(1)26B 10-71RCW(1)29B 10-71RCW(1)32B 10-71RCW(1)35B 10-71RCW(1)38B 10-71RCW(1)41B 10-71RCW(1)44B 10-71RCW(1)47B 10-71RCW(1)50B 10-71RCW(1)53B 10-71RCW(1)56B 10-71RCW(1)59B 10-71RCW(1)62B 10-71RCW(1)65B 10-71RCW(1)68B 10-71RCW(1)71B 10-71RCW(1)74B 10-71RCW(1)77B 10-71RD63B160 MCCB 6-62RD63B180 MCCB 6-62RD63B200 MCCB 6-62RD63F200 MCCB 6-62RD63T160 MCCB 6-62RD63T160 MCCB 6-62RD63T180 MCCB 6-62RD63T180 MCCB 6-62RD63T200 MCCB 6-62RD63T200 MCCB 6-62REC3100G BPLU 14-57REC4100G BPLU 14-57RFC3250G BPLU 14-57RFC4250G BPLU 14-57RHFESD MCCB 6-88RHFESDEM MCCB 6-88RHFF 6-126RHFFEM 6-126RHFL 6-126RHFLEM 6-126RHFM 6-127RHFMEM 6-127RHOCQVD MCCB 6-88RHOEBO MCCB 6-88RHOFBO MCCB 6-88RHOH MCCB 4-12RHOH MCCB 6-88RHOH4 MCCB 4-12RHOH4 MCCB 6-88RHOH62 MCCB 6-88RHOJBO MCCB 6-88RHOLMBO MCCB 6-88RHONBO MCCB 6-88RHONSD MCCB 6-88RHONSSD MCCB 6-88RHONSVD MCCB 6-88RHONSXD MCCB 6-88RHOS06 MCCB 4-12RHOS06 MCCB 4-12RHOS06 MCCB 4-12RHOS20 MCCB 4-12RHOSSD MCCB 6-88RHOSVD MCCB 4-12RHOSVD MCCB 4-12RHOSVD MCCB 4-12RHOSVD MCCB 4-12RHOSVD MCCB 6-88RHOSXD MCCB 6-88RHSFA1 6-126RHSFA1F 6-126RHSFA2 6-126RHSFA2F 6-126RHSLA1 6-126RHSLA1F 6-126RHSLA2 6-126RHSLA2F 6-126RHSMA1 6-127RHSMA1F 6-127RHSMA2 6-127RHSMA2F 6-127RHSPA1 6-127RHSPA1F 6-127RHSPA2 6-127RHSPA2F 6-127RHVE64X MCCB 6-88RHVF12 6-126RHVFBM 6-126RHVL12 6-126RHVLBM 6-126RHVM12 6-127RHVM12H 6-126RHVM12H 6-126RHVM12H 6-127RHVM3RH 6-126RHVM3RH 6-126RHVM3RH 6-127RHVM4XH 6-126RHVM4XH 6-126RHVM4XH 6-127RHVMBM 6-12719 PRODUCTINDEXSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 19-15

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory Page19PRODUCTINDEXRHVMEMH 6-126RHVMEMH 6-126RHVMEMH 6-127RHVMS02 6-126RHVMS02 6-126RHVMS02 6-127RHVMS12 6-126RHVMS12 6-126RHVMS12 6-127RHVMS16 6-126RHVMS16 6-126RHVMS16 6-127RHVP3RH 6-127RHVP3RH 6-127RHVP4XH 6-127RHVPBM 6-127RHVPEMH 6-127RHVPS03 6-127RHVPS12 6-127RHVPS24 6-127RHVPS24 6-127RJC3400G BPLU 14-57RJC4400G BPLU 14-57RLC3600G BPLU 14-57RLC4600G BPLU 14-57RMC3800G BPLU 14-57RMC4800G BPLU 14-57RS2641 MCCB 6-91RS2642 MCCB 6-91RS2643 MCCB 6-91RS2644 MCCB 6-91RS4755 MCCB 6-91RS4755 MCCB 6-91RS4756 MCCB 6-91RS4756 MCCB 6-91RS5773 MCCB 6-91RS5773 MCCB 6-91RS5774 MCCB 6-91RS5774 MCCB 6-91RS5783 MCCB 6-91RS5783 MCCB 6-91RS5784 MCCB 6-91RS5784 MCCB 6-91RS5785 MCCB 6-91RS5785 MCCB 6-91RS5786 MCCB 6-91RS5786 MCCB 6-91RS5787 MCCB 6-91RS5787 MCCB 6-91RS5788 MCCB 6-91RS5788 MCCB 6-91RT121413 RESG 2-9RT6019A 2-9RT6019HA 2-9RT6067A 2-9RT6067HA 2-9RTLDLF 6-132RTLDLR 6-132RTLDSF 6-132RTLDSR 6-132RTLELR MCCB 6-91RTLELR MCCB 6-91RTLESR MCCB 6-91RTLESR MCCB 6-91RTLFLF MCCB 6-132RTLFLR MCCB 6-132RTLFSF MCCB 6-132RTLFSR MCCB 6-132RTLJLF MCCB 6-133RTLJLR MCCB 6-133RTLJSF MCCB 6-133RTLJSR MCCB 6-133RTLLSF 6-133RTLMSF 6-133RTLNSF 6-133RTU121814 2-9RTU121815 2-9RTU121818 2-9RTU122015 2-9RV321G BPLU 14-57RV322G BPLU 14-57RV323G BPLU 14-57RV324G BPLU 14-57RV325G BPLU 14-57RV326G BPLU 14-57RV361G BPLU 14-57RV362G BPLU 14-57RV363G BPLU 14-57RV364G BPLU 14-57RV365G BPLU 14-57RV365SG BPLU 14-57RV366G BPLU 14-57RV421G BPLU 14-57RV422G BPLU 14-57RV423G BPLU 14-57RV424G BPLU 14-57RV425G BPLU 14-57RV426G BPLU 14-57RV461G BPLU 14-57RV462G BPLU 14-57RV463G BPLU 14-57RV464G BPLU 14-57RV465G BPLU 14-57RV465SG BPLU 14-57RV466G BPLU 14-57RXD63B160 MCCB 6-62RXD63B180 MCCB 6-62RXD63B200 MCCB 6-62RXD63S200A MCCB 6-72S01ED62A MCCB 6-36S01ED62AA MCCB 6-36S01ED62AB MCCB 6-36S01ED62B MCCB 6-36S01FD60 MCCB 6-39S01JLD6 MCCB 6-43S01JLD6 MCCB 6-47S01JLD6 MCCB 6-50S01JLD62A MCCB 6-43S01JLD62A MCCB 6-47S01JLD62A MCCB 6-50S01MN6 MCCB 6-54S01MN6 MCCB 6-58S01MN6 MCCB 6-61S01MN6 MCCB 6-63S01MN64A MCCB 6-54S01MN64A MCCB 6-61S01MN64A MCCB 6-63S02MN6 MCCB 6-54S02MN6 MCCB 6-58S02MN6 MCCB 6-61S02MN6 MCCB 6-63S03FD60 MCCB 6-39S03JLD6 MCCB 6-43S03JLD6 MCCB 6-47S03JLD6 MCCB 6-50S03JLD62A MCCB 6-43S03JLD62A MCCB 6-47S03JLD62A MCCB 6-50S03MN6 MCCB 6-54S03MN6 MCCB 6-58S03MN6 MCCB 6-61S03MN6 MCCB 6-63S03MN64A MCCB 6-54S03MN64A MCCB 6-58S03MN64A MCCB 6-61S03MN64A MCCB 6-63S04FD60 MCCB 6-39S04JLD6 MCCB 6-43S04JLD6 MCCB 6-47S04JLD6 MCCB 6-50S04MN6 MCCB 6-54S04MN6 MCCB 6-58S04MN6 MCCB 6-61S04MN6 MCCB 6-63S04MN64A MCCB 6-54S04MN64A MCCB 6-58S04MN64A MCCB 6-61S04MN64A MCCB 6-63S06FD60 MCCB 6-39S06MN6 MCCB 6-54S06MN6 MCCB 6-58S06MN6 MCCB 6-61S06MN6 MCCB 6-63S07FD60 MCCB 6-39S07JLD6 MCCB 6-43S07JLD6 MCCB 6-47S07JLD6 MCCB 6-50S07JLD62A MCCB 6-43S07JLD62A MCCB 6-47S07JLD62A MCCB 6-50S07MN6 6-54S07MN6 6-58S07MN6 6-61S07MN6 6-63S07MN64A MCCB 6-54S07MN64A MCCB 6-58S07MN64A MCCB 6-61S07MN64A MCCB 6-63S09FD60 MCCB 6-39S09JLD6 MCCB 6-43S09JLD6 MCCB 6-47S09JLD6 MCCB 6-50S09JLD62A MCCB 6-43S09JLD62A MCCB 6-47S09JLD62A MCCB 6-50S09MN6 MCCB 6-54S09MN6 MCCB 6-58S09MN6 MCCB 6-61S09MN6 MCCB 6-63S11FD60 MCCB 6-39S11JLD6 MCCB 6-43S11JLD6 MCCB 6-47S11JLD6 MCCB 6-50S11JLD62A MCCB 6-43S11JLD62A MCCB 6-47S11JLD62A MCCB 6-50S11MN6 6-54S11MN6 6-58S11MN6 6-61S11MN6 6-63S11MN64A MCCB 6-54S11MN64A MCCB 6-58S11MN64A MCCB 6-61S11MN64A MCCB 6-63S13FD60 MCCB 6-39S13JLD6 MCCB 6-43S13JLD6 MCCB 6-47S13JLD6 MCCB 6-50S13JLD62A MCCB 6-43S13JLD62A MCCB 6-47S13JLD62A MCCB 6-50S13MN6 MCCB 6-54S13MN6 MCCB 6-54S13MN6 MCCB 6-58S13MN6 MCCB 6-58S13MN6 MCCB 6-61S13MN6 MCCB 6-63S13MN64A MCCB 6-58S13MN64A MCCB 6-61S13MN64A MCCB 6-63S15FD60 MCCB 6-39S15JLD6 MCCB 6-43S15JLD6 MCCB 6-47S15JLD6 MCCB 6-50S15JLD64A MCCB 6-43S15JLD64A MCCB 6-47S15JLD64A MCCB 6-50S15MN6 MCCB 6-54S15MN6 MCCB 6-58S15MN6 MCCB 6-61S15MN6 MCCB 6-63S15MN64A MCCB 6-54S15MN64A MCCB 6-58S15MN64A MCCB 6-61S15MN64A MCCB 6-63S16FD60 MCCB 6-39S16JLD6 MCCB 6-43S16JLD6 MCCB 6-47S16JLD6 MCCB 6-50S16JLD62A MCCB 6-43S16JLD62A MCCB 6-47S16JLD62A MCCB 6-50S16MN6 MCCB 6-54S16MN6 MCCB 6-58S16MN6 MCCB 6-61S16MN6 MCCB 6-63S16MN64A MCCB 6-54S16MN64A MCCB 6-58S16MN64A MCCB 6-61S16MN64A MCCB 6-63S17ED60 MCCB 6-36S17FD60 MCCB 6-39S17JLD6 MCCB 6-43S17JLD6 MCCB 6-47S17JLD6 MCCB 6-50S18JLD6 MCCB 6-43S18JLD6 MCCB 6-47S18JLD6 MCCB 6-50S32B UNPB 10-10S32B UNPB 10-10S32B UNPB 10-10S32B UNPB 10-10S32B UNPB 10-10S32B UNPB 10-10S35815-2 RESG 2-10S38B UNPB 10-10S38B UNPB 10-10S38B UNPB 10-10S38B UNPB 10-10S38B UNPB 10-10S38B UNPB 10-10S40007-01GP RESG 2-7S40404-02QG 2-7S40405-015F RESG 2-7S40405-025 RESG 2-7S40405-02CO RESG 2-7S40405-02QG RESG 2-7S40405-0BNU RESG 2-7S40407-015F RESG 2-7S40407-01NU RESG 2-7S40407-025 RESG 2-7S40407-02CO RESG 2-7S40407-02QG RESG 2-7S42505-02RG RESG 2-7S44305-02CV 2-7S44307-02CV 2-7S44704-8265 RESG 2-8S44B UNPB 10-10S44B UNPB 10-10S44B UNPB 10-10S44B UNPB 10-10S44B UNPB 10-10S44B UNPB 10-10S47604-81GP RESG 2-8S47605-02SP RESG 2-8S47704-01NU RESG 2-8S47704-02 RESG 2-8S47705-01NU RESG 2-8S47707-01NU RESG 2-8S47707-02 RESG 2-8S48104-02 RESG 2-8S48105-83BU RESG 2-8S48504-92 RESG 2-8S48704-82GP RESG 2-8S48707-82GP RESG 2-8S48805-0BNU RESG 2-7S48807-02NU RESG 2-7S56B UNPB 10-10S56B UNPB 10-10S56B UNPB 10-10S56B UNPB 10-10S56B UNPB 10-10S62B UNPB 10-10S62B UNPB 10-10S62B UNPB 10-10S62B UNPB 10-10S62B UNPB 10-10S62B UNPB 10-10S68B UNPB 10-10S68B UNPB 10-10S68B UNPB 10-10S68B UNPB 10-10S68B UNPB 10-10S68B UNPB 10-10S69623 RESG 2-10S69685-1 2-10S9804-9142 RESG 2-7S9804-9144 RESG 2-8S9804-9145 RESG 2-8S9804-9146 RESG 2-8S9804-9147 RESG 2-8S9817-8061 RESG 2-8SA1E025 MCCB 6-82SADU MCCB 6-43SADU MCCB 6-47SADU MCCB 6-50SADU MCCB 6-54SADU MCCB 6-58SADU MCCB 6-61SADU MCCB 6-63SADU MCCB 6-79SADURMK18 MCCB 6-43SADURMK18 MCCB 6-47SADURMK18 MCCB 6-50SADURMK18 MCCB 6-54SADURMK18 MCCB 6-58SADURMK18 MCCB 6-61SADURMK18 MCCB 6-63SADURMK18 MCCB 6-79SBJ1 RESG 2-81SBJ4 RESG 2-81SBL PBSB 10-50SBLBD PBSB 10-61SBLBD PBSB 12-26SCE PBSB 10-50SCED PBSB 10-61SCF PBSB 10-50SCFD 10-61SCJ PBSB 10-50SCJD 10-61SCJD69200 MCCB 6-42SCJD69200G MCCB 6-42SCJD69200NGT MCCB 6-42SCJD69200NT MCCB 6-42SCJD69300 MCCB 6-42SCJD69300G MCCB 6-42SCJD69300NGT MCCB 6-42SCJD69300NT MCCB 6-42SCJD69400 MCCB 6-42SCJD69400G MCCB 6-42SCJD69400NGT MCCB 6-42SCJD69400NT MCCB 6-42SCL PBSB 10-50SCLD 10-61SCLD69300 MCCB 6-46SCLD69300G MCCB 6-46SCLD69300NGT MCCB 6-46SCLD69300NT MCCB 6-46SCLD69400 MCCB 6-46SCLD69400G MCCB 6-46SCLD69400NGT MCCB 6-46SCLD69400NT MCCB 6-46SCLD69500 MCCB 6-46SCLD69500G MCCB 6-46SCLD69500NGT MCCB 6-46SCLD69500NT MCCB 6-46SCLD69600 MCCB 6-46SCLD69600G MCCB 6-46SCLD69600NGT MCCB 6-46SCLD69600NT MCCB 6-46SCMD69600A MCCB 6-53SCMD69600AG MCCB 6-53SCMD69600AGH MCCB 6-53SCMD69600AH MCCB 6-53SCMD69600ANGT MCCB 6-53SCMD69600ANGTH MCCB 6-53SCMD69600ANT MCCB 6-53SCMD69600ANTH MCCB 6-53SCMD69700A MCCB 6-53SCMD69700AG MCCB 6-53SCMD69700AGH MCCB 6-53SCMD69700AH MCCB 6-53SCMD69700ANGT MCCB 6-53SCMD69700ANGTH MCCB 6-53SCMD69700ANT MCCB 6-53SCMD69700ANTH MCCB 6-53SCMD69800A MCCB 6-53SCMD69800AG MCCB 6-53SCMD69800AGH MCCB 6-53SCMD69800AH MCCB 6-53SCMD69800ANGT MCCB 6-53SCMD69800ANGTH MCCB 6-53SCMD69800ANT MCCB 6-53SCMD69800ANTH MCCB 6-53SCND69100A MCCB 6-57SCND69100AG MCCB 6-57SCND69100AGH MCCB 6-57SCND69100AH MCCB 6-57SCND69100ANGT MCCB 6-57SCND69100ANGTH MCCB 6-57SCND69100ANT MCCB 6-57SCND69100ANTH MCCB 6-57SCND69120A MCCB 6-57SCND69120AG MCCB 6-57SCND69120AGH MCCB 6-57SCND69120AH MCCB 6-57SCND69120ANGT MCCB 6-57SCND69120ANGTH MCCB 6-57SCND69120ANT MCCB 6-57SCND69120ANTH MCCB 6-57SCND69800A MCCB 6-57SCND69800AG MCCB 6-57SCND69800AGH MCCB 6-57SCND69800AH MCCB 6-57SCND69800ANGT MCCB 6-57SCND69800ANGTH MCCB 6-57SCND69800ANT MCCB 6-57SCND69800ANTH MCCB 6-57SCT1236 SWBD 12-25SCT432 SWBD 12-25SCT436 SWBD 12-25SCT632 SWBD 12-25SCT636 SWBD 12-25SCT836 SWBD 12-25SE6 PBSB 10-50SE6D PBSB 10-61SE6D PBSB 10-61SEAER 6-90SEAFB MCCB 6-130SEAFM MCCB 6-13019-16Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory PageSEAFN MCCB 6-130SEAFR MCCB 6-130SEAFY MCCB 6-130SEALB MCCB 6-131SEALM MCCB 6-131SEALN MCCB 6-131SEALR MCCB 6-131SEALY MCCB 6-131SEAMB MCCB 6-131SEAMM MCCB 6-131SEAMN MCCB 6-131SEAMR MCCB 6-131SEAMY MCCB 6-131SEB PBSB 10-50SEBD PBSB 12-26SF6 10-50SF6D 10-61SHHTD63F2000 6-64SHHTD63F2000H 6-64SHHTD63F2500 6-64SHHTD63F2500H 6-64SHHTD63F3200 6-64SHHTD63F3200H 6-64SHJD69200 MCCB 6-42SHJD69200G MCCB 6-42SHJD69200GH MCCB 6-42SHJD69200H MCCB 6-42SHJD69200NGT MCCB 6-42SHJD69200NGTH MCCB 6-42SHJD69200NT MCCB 6-42SHJD69200NTH MCCB 6-42SHJD69300 MCCB 6-42SHJD69300G MCCB 6-42SHJD69300GH MCCB 6-42SHJD69300H MCCB 6-42SHJD69300NGT MCCB 6-42SHJD69300NGTH MCCB 6-42SHJD69300NT MCCB 6-42SHJD69300NTH MCCB 6-42SHJD69400 MCCB 6-42SHJD69400G MCCB 6-42SHJD69400GH MCCB 6-42SHJD69400H MCCB 6-42SHJD69400NGT MCCB 6-42SHJD69400NGTH MCCB 6-42SHJD69400NT MCCB 6-42SHJD69400NTH MCCB 6-42SHLD69300 MCCB 6-46SHLD69300G MCCB 6-46SHLD69300NGT MCCB 6-46SHLD69300NT MCCB 6-46SHLD69400 MCCB 6-46SHLD69400G MCCB 6-46SHLD69400NGT MCCB 6-46SHLD69400NT MCCB 6-46SHLD69500 MCCB 6-46SHLD69500G MCCB 6-46SHLD69500NGT MCCB 6-46SHLD69500NT MCCB 6-46SHLD69600 MCCB 6-46SHLD69600G MCCB 6-46SHLD69600NGT MCCB 6-46SHLD69600NT MCCB 6-46SHMD69600A MCCB 6-53SHMD69600AG MCCB 6-53SHMD69600AGH MCCB 6-53SHMD69600AH MCCB 6-53SHMD69600ANGT MCCB 6-53SHMD69600ANGTH MCCB 6-53SHMD69600ANT MCCB 6-53SHMD69600ANTH MCCB 6-53SHMD69700A MCCB 6-53SHMD69700AG MCCB 6-53SHMD69700AGH MCCB 6-53SHMD69700AH MCCB 6-53SHMD69700ANGT MCCB 6-53SHMD69700ANGTH MCCB 6-53SHMD69700ANT MCCB 6-53SHMD69700ANTH MCCB 6-53SHMD69800A MCCB 6-53SHMD69800AG MCCB 6-53SHMD69800AGH MCCB 6-53SHMD69800AH MCCB 6-53SHMD69800ANGT MCCB 6-53SHMD69800ANGTH MCCB 6-53SHMD69800ANT MCCB 6-53SHMD69800ANTH MCCB 6-53SHND69100A MCCB 6-57SHND69100AG MCCB 6-57SHND69100AGH MCCB 6-57SHND69100AH MCCB 6-57SHND69100ANGT MCCB 6-57SHND69100ANGTH MCCB 6-57SHND69100ANT MCCB 6-57SHND69100ANTH MCCB 6-57SHND69120A MCCB 6-57SHND69120AG MCCB 6-57SHND69120AGH MCCB 6-57SHND69120AH MCCB 6-57SHND69120ANGT MCCB 6-57SHND69120ANGTH MCCB 6-57SHND69120ANT MCCB 6-57SHND69120ANTH MCCB 6-57SHND69800A MCCB 6-57SHND69800AG MCCB 6-57SHND69800AGH MCCB 6-57SHND69800AH MCCB 6-57SHND69800ANGT MCCB 6-57SHND69800ANGTH MCCB 6-57SHND69800ANT MCCB 6-57SHND69800ANTH MCCB 6-57SHPD69140 MCCB 6-60SHPD69140G MCCB 6-60SHPD69140NGT MCCB 6-60SHPD69140NT MCCB 6-60SHPD69160 MCCB 6-60SHPD69160G MCCB 6-60SHPD69160NGT MCCB 6-60SHPD69160NT MCCB 6-60SHTD63F2000 6-64SHTD63F2000H 6-64SHTD63F2500 6-64SHTD63F2500H 6-64SHTD63F3200 6-64SHTD63F3200H 6-64SJ1 PBSB 10-50SJ1D PBSB 10-61SJ2D PBSB 10-61SJD69200 MCCB 6-42SJD69200G MCCB 6-42SJD69200GH MCCB 6-42SJD69200H MCCB 6-42SJD69200NGT MCCB 6-42SJD69200NGTH MCCB 6-42SJD69200NT MCCB 6-42SJD69200NTH MCCB 6-42SJD69300 MCCB 6-42SJD69300G MCCB 6-42SJD69300GH MCCB 6-42SJD69300H MCCB 6-42SJD69300NGT MCCB 6-42SJD69300NGTH MCCB 6-42SJD69300NT MCCB 6-42SJD69300NTH MCCB 6-42SJD69400 MCCB 6-42SJD69400G MCCB 6-42SJD69400GH MCCB 6-42SJD69400H MCCB 6-42SJD69400NGT MCCB 6-42SJD69400NGTH MCCB 6-42SJD69400NT MCCB 6-42SJD69400NTH MCCB 6-42SL0420 HDSS 3-20SL6 PBSB 10-50SL6D PBSB 10-61SLD69300 MCCB 6-46SLD69300G MCCB 6-46SLD69300NGT MCCB 6-46SLD69300NT MCCB 6-46SLD69400 MCCB 6-46SLD69400G MCCB 6-46SLD69400NGT MCCB 6-46SLD69400NT MCCB 6-46SLD69500 MCCB 6-46SLD69500G MCCB 6-46SLD69500NGT MCCB 6-46SLD69500NT MCCB 6-46SLD69600 MCCB 6-46SLD69600G MCCB 6-46SLD69600NGT MCCB 6-46SLD69600NT MCCB 6-46SLEC32***0ED2 14-15SLEC32***0ED2 14-15SLEC32***0GED2 14-15SLEC32***0GED2 14-15SLEC32***0IGED2 14-15SLEC32***0IGED2 14-15SLEC34***0ED4 14-15SLEC34***0ED4 14-15SLEC34***0ED4 14-15SLEC34***0GED4 14-15SLEC34***0GED4 14-15SLEC34***0GED4 14-15SLEC34***0IGED4 14-15SLEC34***0IGED4 14-15SLEC34***0IGED4 14-15SLEC36***0ED6 14-15SLEC36***0ED6 14-15SLEC36***0ED6 14-15SLEC36***0GED6 14-15SLEC36***0GED6 14-15SLEC36***0GED6 14-15SLEC36***0IGED6 14-15SLEC36***0IGED6 14-15SLEC36***0IGED6 14-15SLEC42***0ED2 14-15SLEC42***0ED2 14-15SLEC42***0GED2 14-15SLEC42***0GED2 14-15SLEC42***0IGED2 14-15SLEC42***0IGED2 14-15SLEC44***0ED4 14-15SLEC44***0ED4 14-15SLEC44***0ED4 14-15SLEC44***0GED4 14-15SLEC44***0GED4 14-15SLEC44***0GED4 14-15SLEC44***0IGED4 14-15SLEC44***0IGED4 14-15SLEC44***0IGED4 14-15SLEC46***0ED6 14-15SLEC46***0ED6 14-15SLEC46***0ED6 14-15SLEC46***0GED6 14-15SLEC46***0GED6 14-15SLEC46***0GED6 14-15SLEC46***0IGED6 14-15SLEC46***0IGED6 14-15SLEC46***0IGED6 14-15SLEC52***0ED2 14-15SLEC52***0ED2 14-15SLEC52***0GED2 14-15SLEC52***0GED2 14-15SLEC52***0IGED2 14-15SLEC52***0IGED2 14-15SLEC54***0ED4 14-15SLEC54***0ED4 14-15SLEC54***0ED4 14-15SLEC54***0GED4 14-15SLEC54***0GED4 14-15SLEC54***0GED4 14-15SLEC54***0IGED4 14-15SLEC54***0IGED4 14-15SLEC54***0IGED4 14-15SLEC56***0ED6 14-15SLEC56***0ED6 14-15SLEC56***0ED6 14-15SLEC56***0GED6 14-15SLEC56***0GED6 14-15SLEC56***0GED6 14-15SLEC56***0IGED6 14-15SLEC56***0IGED6 14-15SLEC56***0IGED6 14-15SLEL36***0CED6 14-16SLEL36***0CED6 14-16SLEL36***0CED6 14-16SLEL36***0GCED6 14-16SLEL36***0GCED6 14-16SLEL36***0GCED6 14-16SLEL36***0IGCED6 14-16SLEL36***0IGCED6 14-16SLEL36***0IGCED6 14-16SLEL46***0CED6 14-16SLEL46***0CED6 14-16SLEL46***0CED6 14-16SLEL46***0GCED6 14-16SLEL46***0GCED6 14-16SLEL46***0GCED6 14-16SLEL46***0IGCED6 14-16SLEL46***0IGCED6 14-16SLEL46***0IGCED6 14-16SLEL56***0CED6 14-16SLEL56***0CED6 14-16SLEL56***0CED6 14-16SLEL56***0GCED6 14-16SLEL56***0GCED6 14-16SLEL56***0GCED6 14-16SLEL56***0IGCED6 14-16SLEL56***0IGCED6 14-16SLEL56***0IGCED6 14-16SLFC36***0FXD6 14-15SLFC36***0GFXD6 14-15SLFC36***0IGFXD6 14-15SLFC362500FXD6 BPLU 14-15SLFC362500GFXD6 BPLU 14-15SLFC362500IGFXD6 BPLU 14-15SLFC46***0FXD6 14-15SLFC46***0GFXD6 14-15SLFC46***0IGFXD6 14-15SLFC462500FXD6 BPLU 14-15SLFC462500GFXD6 BPLU 14-15SLFC462500IGFXD6 BPLU 14-15SLFC56***0FXD6 14-15SLFC56***0FXD6 14-15SLFC56***0GFXD6 14-15SLFC56***0GFXD6 14-15SLFC56***0IGFXD6 14-15SLFC56***0IGFXD6 14-15SLFL36***0CFD6 14-16SLFL36***0GCFD6 14-16SLFL36***0IGCFD6 14-16SLFL362500CFD6 BPLU 14-16SLFL362500CGFD6 14-16SLFL362500ICGFD6 14-16SLFL46***0CFD6 14-16SLFL46***0GCFD6 14-16SLFL46***0IGCFD6 14-16SLFL462500CFD6 BPLU 14-16SLFL462500GCFD6 BPLU 14-16SLFL462500IGCFD6 BPLU 14-16SLFL56***0CFD6 14-16SLFL56***0CFD6 14-16SLFL56***0GCFD6 14-16SLFL56***0GCFD6 14-16SLFL56***0IGCFD6 14-16SLFL56***0IGCFD6 14-16SLJ2600 BPLU 14-14SLJ6600 BPLU 14-14SLJC36***0GJXD6 14-15SLJC36***0IGJXD6 14-15SLJC36***0JXD6 14-15SLJC46***0GJXD6 14-15SLJC46***0IGJXD6 14-15SLJC46***0JXD6 14-15SLJC562000GJXD6 14-15SLJC562000IGJXD6 14-15SLJC562000JXD6 14-15SLJCS56***0GJXD6 14-15SLJCS56***0IGJXD6 14-15SLJCS56***0JXD6 14-15SLJL36***0CGJD6 14-16SLJL36***0CJD6 14-16SLJL36***0ICGJD6 14-16SLJL46***0CJD6 14-16SLJL46***0GCJD6 14-16SLJL46***0IGCJD6 14-16SLJL562000CJD6 14-16SLJL562000GCJD6 14-16SLJL562000IGCJD6 14-16SLJLS56***0CJD6 14-16SLJLS56***0GCJD6 14-16SLJLS56***0IGCJD6 14-16SLLCS36***0GLXD6 14-15SLLCS36***0IGLXD6 14-15SLLCS36***0LXD6 14-15SLLCS46***0GLXD6 14-15SLLCS46***0IGLXD6 14-15SLLCS46***0LXD6 14-15SLLLS36***0CLD6 14-16SLLLS36***0GCLD6 14-16SLLLS36***0IGCLD6 14-16SLLLS46***0CLD6 14-16SLLLS46***0GCLD6 14-16SLLLS46***0IGCLD6 14-16SLM1D 10-61SLM1D 12-26SLMCS36***0GMXD6 14-15SLMCS36***0IGMXD6 14-15SLMCS36***0MXD6 14-15SLMCS46***0GMXD6 14-15SLMCS46***0IGMXD6 14-15SLMCS46***0MXD6 14-15SLPGR3140G BPLU 14-14SLR2030 BPLU 14-14SLR2060 BPLU 14-14SLR2100 BPLU 14-14SLR2200 BPLU 14-14SLR2400 BPLU 14-14SLR2600 BPLU 14-14SLR6030 BPLU 14-14SLR6060 BPLU 14-14SLR6100 BPLU 14-14SLR6200 BPLU 14-14SLR6400 BPLU 14-14SLR6600 BPLU 14-14SLT2100 14-14SLT2200 BPLU 14-14SLT2400 BPLU 14-14SLT2600 BPLU 14-14SLT6100 BPLU 14-14SLT6200 BPLU 14-14SLT6400 BPLU 14-14SLT6600 BPLU 14-14SLVB*3210 14-14SLVB*3210G 14-14SLVB*3210IG 14-14SLVB*3220 14-14SLVB*3220G 14-14SLVB*3220IG 14-14SLVB*3230 14-14SLVB*3230G 14-14SLVB*3230IG 14-14SLVB*3240 14-14SLVB*3240G 14-14SLVB*3240IG 14-14SLVB*3250 14-14SLVB*3250G 14-14SLVB*3250IG 14-14SLVB*3260 14-14SLVB*3260G 14-14SLVB*3260IG 14-14SLVB*3610 14-14SLVB*3610G 14-14SLVB*3610IG 14-14SLVB*3620 14-14SLVB*3620G 14-14SLVB*3620IG 14-14SLVB*3630 14-14SLVB*3630G 14-14SLVB*3630IG 14-14SLVB*3640 14-14SLVB*3640G 14-14SLVB*3640IG 14-14SLVB*3650 14-14SLVB*3650G 14-14SLVB*3650IG 14-14SLVB*3660 14-14SLVB*3660G 14-14SLVB*3660IG 14-14SLVB*4210 14-14SLVB*4210G 14-14SLVB*4210IG 14-14SLVB*4220 14-14SLVB*4220G 14-14SLVB*4220IG 14-14SLVB*4230 14-14SLVB*4230G 14-14SLVB*4230IG 14-14SLVB*4240 14-14SLVB*4240G 14-14SLVB*4240IG 14-14SLVB*4250 14-14SLVB*4250G 14-14SLVB*4250IG 14-14SLVB*4260 14-14SLVB*4260G 14-14SLVB*4260IG 14-14SLVB*4610 14-14SLVB*4610G 14-14SLVB*4610IG 14-14SLVB*4620 14-14SLVB*4620G 14-14SLVB*4620IG 14-14SLVB*4630 14-14SLVB*4630G 14-14SLVB*4630IG 14-14SLVB*4640 14-14SLVB*4640G 14-14SLVB*4640IG 14-14SLVB*4650 14-14SLVB*4650G 14-14SLVB*4650IG 14-14SLVB*4660 14-14SLVB*4660G 14-14SLVB*4660IG 14-14SLVB*5210 14-14SLVB*5210G 14-14SLVB*5210IG 14-14SLVB*5220 14-14SLVB*5220G 14-1419 PRODUCTINDEXSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 19-17

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory Page19PRODUCTINDEXSLVB*5220IG 14-14SLVB*5230 14-14SLVB*5230G 14-14SLVB*5230IG 14-14SLVB*5240 14-14SLVB*5240G 14-14SLVB*5240IG 14-14SLVB*5250 14-14SLVB*5250G 14-14SLVB*5250IG 14-14SLVB*5610 14-14SLVB*5610G 14-14SLVB*5610IG 14-14SLVB*5620 14-14SLVB*5620G 14-14SLVB*5620IG 14-14SLVB*5630 14-14SLVB*5630G 14-14SLVB*5630IG 14-14SLVB*5640 14-14SLVB*5640G 14-14SLVB*5640IG 14-14SLVB*5650 14-14SLVB*5650G 14-14SLVB*5650IG 14-14SMB6 MCCB 6-87SMBKED1 UNPB 10-12SMBKED3 UNPB 10-12SMBKFD1 UNPB 10-12SMBKFD3 UNPB 10-12SMBKJD1 UNPB 10-12SMBKJD3 UNPB 10-12SMBKLD1 UNPB 10-12SMBKLD3 UNPB 10-12SMBKQJ1 UNPB 10-12SMBKQJ3 UNPB 10-12SMD69600A MCCB 6-53SMD69600AG MCCB 6-53SMD69600AGH MCCB 6-53SMD69600AH MCCB 6-53SMD69600ANGT MCCB 6-53SMD69600ANGTH MCCB 6-53SMD69600ANT MCCB 6-53SMD69600ANTH MCCB 6-53SMD69700A MCCB 6-53SMD69700AG MCCB 6-53SMD69700AGH MCCB 6-53SMD69700AH MCCB 6-53SMD69700ANGT MCCB 6-53SMD69700ANGTH MCCB 6-53SMD69700ANT MCCB 6-53SMD69700ANTH MCCB 6-53SMD69800A MCCB 6-53SMD69800AG MCCB 6-53SMD69800AGH MCCB 6-53SMD69800AH MCCB 6-53SMD69800ANGT MCCB 6-53SMD69800ANGTH MCCB 6-53SMD69800ANT MCCB 6-53SMD69800ANTH MCCB 6-53SMF NEMA 16-150SMF NEMA 16-6SMF NEMA 16-79SMLKA1 UNPB 10-12SMLKA3 UNPB 10-12SMMBQMK 12-26SMMCEMK 12-26SMMEDMK 12-26SMMFDMK 12-26SMMHEMK 12-26SMMNGMK 12-26SMMQJMK 12-26SMMTFMK 12-26SMND 10-61SMND 10-61SMND 12-26SMND 12-26SNB PBSB 10-50SNBD PBSB 10-61SNBD PBSB 12-26SND69100A MCCB 6-57SND69100AG MCCB 6-57SND69100AGH MCCB 6-57SND69100AH MCCB 6-57SND69100ANGT MCCB 6-57SND69100ANGTH MCCB 6-57SND69100ANT MCCB 6-57SND69100ANTH MCCB 6-57SND69120A MCCB 6-57SND69120AG MCCB 6-57SND69120AGH MCCB 6-57SND69120AH MCCB 6-57SND69120ANGT MCCB 6-57SND69120ANGTH MCCB 6-57SND69120ANT MCCB 6-57SND69120ANTH MCCB 6-57SND69800A MCCB 6-57SND69800AG MCCB 6-57SND69800AGH MCCB 6-57SND69800AH MCCB 6-57SND69800ANGT MCCB 6-57SND69800ANGTH MCCB 6-57SND69800ANT MCCB 6-57SND69800ANTH MCCB 6-57SP2211 RESG 2-71SP2211RJ RESG 2-72SP2211RJB RESG 2-72SP221FK RESG 2-71SP3311 RESG 2-71SP3311RJ RESG 2-72SP3311RJB RESG 2-72SP331FK RESG 2-71SP4212 RESG 2-71SP4212RJ RESG 2-72SP4212RJB RESG 2-72SP4212RJL RESG 2-73SP422FK RESG 2-71SP4312 RESG 2-71SP4312RJ RESG 2-72SP4312RJB RESG 2-72SP4312RJL RESG 2-73SP432FK RESG 2-71SP4411 RESG 2-71SP4411RJ RESG 2-72SP4411RJB RESG 2-72SP4412 RESG 2-71SP4412RJ RESG 2-72SP4412RJB RESG 2-72SP4412RJL RESG 2-73SP441FK RESG 2-71SP442FK RESG 2-71SP4511 RESG 2-71SP4511RJ RESG 2-72SP4511RJB RESG 2-72SP4561FK RESG 2-71SP4611 RESG 2-71SP4611RJ RESG 2-72SP4611RJB RESG 2-72SP5411 RESG 2-71SP6412 RESG 2-71SP642FK RESG 2-71SP6511 RESG 2-71SP6511RJ RESG 2-72SP6511RJB RESG 2-72SP6512 RESG 2-71SP6512RJ RESG 2-72SP6512RJB RESG 2-72SP6512RJL RESG 2-73SP6561FK RESG 2-71SP6562FK RESG 2-71SP6611 RESG 2-71SP6611RJ RESG 2-72SP6611RJB RESG 2-72SP6612 RESG 2-71SP6612RJ RESG 2-72SP6612RJB RESG 2-72SP6612RJL RESG 2-73SP8612 RESG 2-71SP8612RJ 2-72SPD69140 MCCB 6-60SPD69140G MCCB 6-60SPD69140NGT MCCB 6-60SPD69140NT MCCB 6-60SPD69160 MCCB 6-60SPD69160G MCCB 6-60SPD69160NGT MCCB 6-60SPD69160NT MCCB 6-60SQJ PBSB 10-50SQJD PBSB 10-61SRSS RESG 2-10SRSS RESG 2-74SRSS RESG 2-81SRSTD RESG 2-10SRSTD RESG 2-26SRSTD RESG 2-81SRSW RESG 2-10SRSW RESG 2-26SRSW RESG 2-74SRSW RESG 2-81SRTDF3 6-132SRTDR3 6-132SRTFF3 MCCB 6-132SRTFR3 6-132SRTJF3 6-133SRTJR3 6-133SRTLF3 6-133SRTMF3 6-133SRTNF3 6-133SSBP MCCB 6-133SSBPH MCCB 6-133SSCJ PBSB 10-50SSCJD 10-61SSCL PBSB 10-50SSCLD PBSB 10-61SSH075 HDSS 3-20SSH100 HDSS 3-20SSH125 HDSS 3-20SSH150 HDSS 3-20SSH200 HDSS 3-20SSJ1 10-50SSJ1D PBSB 10-61SSL6 PBSB 10-50SSL6D 10-61SSMND PBSB 10-61SSMND PBSB 10-61SSMND PBSB 12-26SSMND PBSB 12-26SSRK33 HDSS 4-12SSRK34 HDSS 4-12SSRK35 HDSS 12-23SSRK36 HDSS 12-23STD20TLI 6-64STD20TLIG 6-64STD20TLS 6-64STD20TLSG 6-64STD20TLSI 6-64STD20TLSIG 6-64STD32TCON MCCB 6-64STD63F2000 6-64STD63F2000H 6-64STD63F2500 6-64STD63F2500H 6-64STD63F3200 6-64STD63F3200H 6-64STDAPM 6-65STDAS MCCB 6-65STDAS10 6-65STDAS12 6-65STDAS2 MCCB 6-65STDAS4 MCCB 6-65STDAS6 6-65STDAS8 MCCB 6-65STDBA120 6-65STDBA125 6-65STDBA24 MCCB 6-65STDBA48 6-65STDDM 6-65STDDMR120 6-65STDDMR125 6-65STDDMR24 6-65STDDMR48 6-65STDGFM 6-65STDMIF32 6-87STDPLD MCCB 6-86STDST12 6-65STDST120 MCCB 6-65STDST125 6-65STDST24 MCCB 6-65STDST240 MCCB 6-65STDST48 6-65STDST480 6-65STDTBLB MCCB 6-65STDTBLT MCCB 6-65STDTBM MCCB 6-65STDTBRB MCCB 6-65STDTBRT MCCB 6-65STDUV120 6-65STDUV125 6-65STDUV24 6-65STDUV240 6-65STDUV48 6-65STDUV480 6-65STDUV600 6-65STREM60D MCCB 6-25STREM60D MCCB 6-33STRER240 MCCB 6-25STRER240 MCCB 6-33STREV600 MCCB 6-25STREV600 MCCB 6-33STRLB24DC MCCB 6-103STRLB24DC MCCB 6-107STRLB24DC MCCB 6-111STRLB24DC MCCB 6-99STRLC60DC MCCB 6-103STRLC60DC MCCB 6-107STRLC60DC MCCB 6-111STRLC60DC MCCB 6-99STRLD125DC MCCB 6-103STRLD125DC MCCB 6-107STRLD125DC MCCB 6-111STRLD125DC MCCB 6-99STRLE250DC MCCB 6-103STRLE250DC MCCB 6-107STRLE250DC MCCB 6-111STRLE250DC MCCB 6-99STRLM60 MCCB 6-103STRLM60 MCCB 6-107STRLM60 MCCB 6-111STRLM60 MCCB 6-99STRLN120 MCCB 6-103STRLN120 MCCB 6-107STRLN120 MCCB 6-111STRLN120 MCCB 6-99STRLS277 MCCB 6-103STRLS277 MCCB 6-107STRLS277 MCCB 6-111STRLS277 MCCB 6-99STRLV600 MCCB 6-103STRLV600 MCCB 6-107STRLV600 MCCB 6-111STRLV600 MCCB 6-99STRPB24DC MCCB 6-115STRPB24DC MCCB 6-119STRPB24DC MCCB 6-122STRPC60DC MCCB 6-115STRPC60DC MCCB 6-119STRPC60DC MCCB 6-122STRPD125DC MCCB 6-115STRPD125DC MCCB 6-119STRPD125DC MCCB 6-122STRPE250DC MCCB 6-115STRPE250DC MCCB 6-119STRPE250DC MCCB 6-122STRPM60 MCCB 6-115STRPM60 MCCB 6-119STRPM60 MCCB 6-122STRPN120 MCCB 6-115STRPN120 MCCB 6-119STRPN120 MCCB 6-122STRPS277 MCCB 6-115STRPS277 MCCB 6-119STRPS277 MCCB 6-122STRPV600 MCCB 6-115STRPV600 MCCB 6-119STRPV600 MCCB 6-122SUA2311-0PGP RESG 2-6SUA2311-0PQG RESG 2-6SUA2717-YPDN RESG 2-6SUA2717-YPGP RESG 2-6SUA2717-YPQG RESG 2-6SUA2717-YPZA RESG 2-6SUA3311-0PGP RESG 2-6SUA3311-0PQG RESG 2-6SUA3717-YPDN RESG 2-6SUA3717-YPGP RESG 2-6SUA3717-YPZA RESG 2-6SUA4311-0PGP RESG 2-6SUA4311-0PQG RESG 2-6SUA4719-YPDN RESG 2-6SUA4719-YPGP RESG 2-6SUA4719-YPQG RESG 2-6SUA4719-YPZA RESG 2-6SUA5719-KPDN RESG 2-6SUA5719-KPGP RESG 2-6SUA6719-KPQG RESG 2-6SUA6719-KPZA RESG 2-6SUAS817-PPGP RESG 2-5SUAS818-PGNM RESG 2-5SUAS877-PG RESG 2-5SUAS877-PPCV RESG 2-5SUAS877-PPDN RESG 2-5SUAS877-PPGP RESG 2-5SUAS877-PPZ RESG 2-5SUAS877-PPZA RESG 2-5SUAS917-XJCA RESG 2-5SUAT111-0G RESG 2-4SUAT111-0GF RESG 2-4SUAT111-0JCA RESG 2-4SUAT111-0MXA RESG 2-4SUAT111-0PDN RESG 2-4SUAT111-0PGP RESG 2-4SUAT111-0PQG RESG 2-4SUAT111-0PZA RESG 2-4SUAT111-PG RESG 2-4SUAT121-0BCO RESG 2-4SUAT121-0GWR RESG 2-4SUAT121-BBCO RESG 2-4SUAT121-BGWR RESG 2-4SUAT121-BM RESG 2-4SUAT121-PBCO RESG 2-4SUAT121-PGWR RESG 2-4SUAT317-0FP RESG 2-5SUAT317-0G RESG 2-5SUAT317-0GF RESG 2-5SUAT317-0MXA RESG 2-5SUAT317-0PCV RESG 2-5SUAT317-0PDN RESG 2-5SUAT317-0PGP RESG 2-5SUAT317-0PQG RESG 2-5SUAT317-0PZA RESG 2-5SUAT317-DGZ RESG 2-5SUAT327-0GWR 2-5SUAT327-0MCO RESG 2-5SUAT417-0PQG RESG 2-5SUAT417-PG RESG 2-5SUAT417-XFP RESG 2-5SUAT417-XG RESG 2-5SUAT417-XGDU RESG 2-5SUAT417-XGF RESG 2-5SUAT417-XPQG RESG 2-5SUAT427-PMCO RESG 2-5SUAT427-XMWR RESG 2-5SUAT517-PDG RESG 2-5SUAT618-XGNM RESG 2-5SUK1000TA RESG 2-74SUK350TA RESG 2-74SUK600TA RESG 2-74SX302A10F 14-5SX302A10P 14-5SX302A10R 14-5SX302A10R 14-5SX302A14F 14-5SX302A14P 14-5SX302A19F 14-5SX302A20F 14-5SX302A20P 14-5SX302A20R 14-5SX302A24F 14-5SX302A24P 14-5SX302A24R 14-5SX302A29F 14-5SX302A30F 14-5SX302A30P 14-5SX302A30R 14-5SX302A34F 14-5SX302A34P 14-5SX302A34R 14-5SX302A39F 14-5SX302C10F 14-8SX302C10P 14-8SX302C10R 14-8SX302C14F 14-8SX302C14P 14-8SX302C14R 14-8SX302C19F 14-8SX302C20F 14-8SX302C20P 14-8SX302C20R 14-8SX302C24F 14-8SX302C24P 14-8SX302C24R 14-8SX302C29F 14-8SX302C30F 14-8SX302C30P 14-8SX302C30R 14-8SX302C34F 14-8SX302C34P 14-8SX302C34R 14-8SX302C39F 14-8SX304A10F 14-5SX304A10P 14-5SX304A10R 14-5SX304A14F 14-5SX304A14P 14-5SX304A14R 14-5SX304A19F 14-5SX304A20F 14-5SX304A20P 14-5SX304A20R 14-5SX304A24F 14-519-18Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory PageSX304A24P 14-5SX304A24R 14-5SX304A29F 14-5SX304A30F 14-5SX304A30P 14-5SX304A30R 14-5SX304A34F 14-5SX304A34P 14-5SX304A34R 14-5SX304A39F 14-5SX304C10F 14-8SX304C10P 14-8SX304C10R 14-8SX304C14F 14-8SX304C14P 14-8SX304C14R 14-8SX304C19F 14-8SX304C20F 14-8SX304C20P 14-8SX304C20R 14-8SX304C24F 14-8SX304C24P 14-8SX304C24R 14-8SX304C29F 14-8SX304C30F 14-8SX304C30P 14-8SX304C30R 14-8SX304C34F 14-8SX304C34P 14-8SX304C34R 14-8SX304C39F 14-8SX306A10F 14-5SX306A10P 14-5SX306A10R 14-5SX306A14F 14-5SX306A14P 14-5SX306A14R 14-5SX306A19F 14-5SX306A20F 14-5SX306A20P 14-5SX306A20R 14-5SX306A24F 14-5SX306A24P 14-5SX306A24R 14-5SX306A29F 14-5SX306A30F 14-5SX306A30P 14-5SX306A30R 14-5SX306A34F 14-5SX306A34P 14-5SX306A34R 14-5SX306A39F 14-5SX306C10F 14-8SX306C10P 14-8SX306C10R 14-8SX306C14F 14-8SX306C14P 14-8SX306C14R 14-8SX306C19F 14-8SX306C20F 14-8SX306C20P 14-8SX306C20R 14-8SX306C24F 14-8SX306C24P 14-8SX306C24R 14-8SX306C29F 14-8SX306C30F 14-8SX306C30P 14-8SX306C30R 14-8SX306C34F 14-8SX306C34P 14-8SX306C34R 14-8SX306C39F 14-8SX308A10F 14-5SX308A10P 14-5SX308A10R 14-5SX308A14F 14-5SX308A14P 14-5SX308A14R 14-5SX308A19F 14-5SX308A20F 14-5SX308A20P 14-5SX308A20R 14-5SX308A24F 14-5SX308A24P 14-5SX308A24R 14-5SX308A29F 14-5SX308A30F 14-5SX308A30F 14-5SX308A30P 14-5SX308A30P 14-5SX308A30R 14-5SX308A30R 14-5SX308A34F 14-5SX308A34F 14-5SX308A34P 14-5SX308A34P 14-5SX308A34R 14-5SX308A34R 14-5SX308A39F 14-5SX308A39F 14-5SX308C10F 14-8SX308C10P 14-8SX308C10R 14-8SX308C14F 14-8SX308C14P 14-8SX308C14R 14-8SX308C19F 14-8SX308C20F 14-8SX308C20P 14-8SX308C20R 14-8SX308C24F 14-8SX308C24P 14-8SX308C24R 14-8SX308C29F 14-8SX308C30F 14-8SX308C30P 14-8SX308C30R 14-8SX308C34F 14-8SX308C34P 14-8SX308C34R 14-8SX308C39F 14-8SX310A10F 14-5SX310A10P 14-5SX310A10R 14-5SX310A14F 14-5SX310A14P 14-5SX310A14R 14-5SX310A19F 14-5SX310A20F 14-5SX310A20P 14-5SX310A20R 14-5SX310A24F 14-5SX310A24P 14-5SX310A24R 14-5SX310A29F 14-5SX310A30F 14-5SX310A30P 14-5SX310A30R 14-5SX310A34F 14-5SX310A34P 14-5SX310A34R 14-5SX310A39F 14-5SX310C10F 14-8SX310C10P 14-8SX310C10R 14-8SX310C14F 14-8SX310C14P 14-8SX310C14R 14-8SX310C19F 14-8SX310C20F 14-8SX310C20P 14-8SX310C20R 14-8SX310C24F 14-8SX310C24P 14-8SX310C24R 14-8SX310C29F 14-8SX310C30F 14-8SX310C30P 14-8SX310C30R 14-8SX310C34F 14-8SX310C34P 14-8SX310C34R 14-8SX310C39F 14-8SX312A10F 14-6SX312A10P 14-6SX312A10R 14-6SX312A14F 14-6SX312A14P 14-6SX312A14R 14-6SX312A19F 14-6SX312A20F 14-6SX312A20P 14-6SX312A20R 14-6SX312A24F 14-6SX312A24P 14-6SX312A24R 14-6SX312A29F 14-6SX312A30F 14-6SX312A30P 14-6SX312A30R 14-6SX312A34F 14-6SX312A34P 14-6SX312A34R 14-6SX312A39F 14-6SX312C10F 14-9SX312C10P 14-9SX312C10R 14-9SX312C14F 14-9SX312C14P 14-9SX312C14R 14-9SX312C19F 14-9SX312C20F 14-9SX312C20P 14-9SX312C20R 14-9SX312C24F 14-9SX312C24P 14-9SX312C24R 14-9SX312C29F 14-9SX312C30F 14-9SX312C30P 14-9SX312C30R 14-9SX312C34F 14-9SX312C34P 14-9SX312C34R 14-9SX312C39F 14-9SX313A10F 14-6SX313A10F 14-6SX313A10P 14-6SX313A10P 14-6SX313A10R 14-6SX313A10R 14-6SX313A14F 14-6SX313A14F 14-6SX313A14P 14-6SX313A14P 14-6SX313A14R 14-6SX313A14R 14-6SX313A19F 14-6SX313A19F 14-6SX313A30F 14-6SX313A30P 14-6SX313A30R 14-6SX313A34F 14-6SX313A34P 14-6SX313A34R 14-6SX313A39F 14-6SX313C10F 14-9SX313C10P 14-9SX313C10R 14-9SX313C14F 14-9SX313C14P 14-9SX313C14R 14-9SX313C19F 14-9SX313C20F 14-9SX313C20P 14-9SX313C20R 14-9SX313C24F 14-9SX313C24P 14-9SX313C24R 14-9SX313C29F 14-9SX313C30F 14-9SX313C30P 14-9SX313C30R 14-9SX313C34F 14-9SX313C34P 14-9SX313C34R 14-9SX313C39F 14-9SX316A10F 14-6SX316A10P 14-6SX316A10R 14-6SX316A14F 14-6SX316A14P 14-6SX316A14R 14-6SX316A19F 14-6SX316A20F 14-6SX316A20P 14-6SX316A20R 14-6SX316A24F 14-6SX316A24P 14-6SX316A24R 14-6SX316A29F 14-6SX316A30F 14-6SX316A30P 14-6SX316A30R 14-6SX316A34F 14-6SX316A34P 14-6SX316A34R 14-6SX316A39F 14-6SX316C10F 14-9SX316C10P 14-9SX316C10R 14-9SX316C14F 14-9SX316C14P 14-9SX316C14R 14-9SX316C19F 14-9SX316C20F 14-9SX316C20P 14-9SX316C20R 14-9SX316C24F 14-9SX316C24P 14-9SX316C24R 14-9SX316C29F 14-9SX316C30F 14-9SX316C30P 14-9SX316C30R 14-9SX316C34F 14-9SX316C34P 14-9SX316C34R 14-9SX316C39F 14-9SX320A10F 14-6SX320A10P 14-6SX320A10R 14-6SX320A14F 14-6SX320A14P 14-6SX320A14R 14-6SX320A19F 14-6SX320A20F 14-6SX320A20P 14-6SX320A20R 14-6SX320A24F 14-6SX320A24P 14-6SX320A24R 14-6SX320A29F 14-6SX320A30F 14-6SX320A30P 14-6SX320A30R 14-6SX320A34F 14-6SX320A34P 14-6SX320A34R 14-6SX320A39F 14-6SX320C10F 14-9SX320C10P 14-9SX320C10R 14-9SX320C14F 14-9SX320C14P 14-9SX320C14R 14-9SX320C19F 14-9SX320C20F 14-9SX320C20P 14-9SX320C20R 14-9SX320C24F 14-9SX320C24P 14-9SX320C24R 14-9SX320C29F 14-9SX320C30F 14-9SX320C30P 14-9SX320C30R 14-9SX320C34F 14-9SX320C34P 14-9SX320C34R 14-9SX320C39F 14-9SX325A10F 14-7SX325A10P 14-7SX325A10R 14-7SX325A14F 14-7SX325A14P 14-7SX325A14R 14-7SX325A19F 14-7SX325A20F 14-7SX325A20P 14-7SX325A20R 14-7SX325A24F 14-7SX325A24P 14-7SX325A24R 14-7SX325A29F 14-7SX325A30F 14-7SX325A30P 14-7SX325A30R 14-7SX325A34F 14-7SX325A34P 14-7SX325A34R 14-7SX325A39F 14-7SX325C10F 14-9SX325C10P 14-9SX325C10R 14-9SX325C14F 14-9SX325C14P 14-9SX325C14R 14-9SX325C19F 14-9SX325C20F 14-9SX325C20P 14-9SX325C20R 14-9SX325C24F 14-9SX325C24P 14-9SX325C24R 14-9SX325C29F 14-9SX325C30F 14-9SX325C30P 14-9SX325C30R 14-9SX325C34F 14-9SX325C34P 14-9SX325C34R 14-9SX325C39F 14-9SX330A10F 14-7SX330A10P 14-7SX330A10R 14-7SX330A14F 14-7SX330A14P 14-7SX330A14R 14-7SX330A19F 14-7SX330A20F 14-7SX330A20P 14-7SX330A20R 14-7SX330A24F 14-7SX330A24P 14-7SX330A24R 14-7SX330A29F 14-7SX330A30F 14-7SX330A30P 14-7SX330A30R 14-7SX330A34F 14-7SX330A34P 14-7SX330A34R 14-7SX330A39F 14-7SX330C10F 14-10SX330C10P 14-10SX330C10R 14-10SX330C14F 14-10SX330C14P 14-10SX330C14R 14-10SX330C19F 14-10SX330C20F 14-10SX330C20P 14-10SX330C20R 14-10SX330C24F 14-10SX330C24P 14-10SX330C24R 14-10SX330C29F 14-10SX330C30F 14-10SX330C30P 14-10SX330C30R 14-10SX330C34F 14-10SX330C34P 14-10SX330C34R 14-10SX330C39F 14-10SX332A10F 14-7SX332A10P 14-7SX332A10R 14-7SX332A14F 14-7SX332A14P 14-7SX332A14R 14-7SX332A19F 14-7SX332A20F 14-7SX332A20P 14-7SX332A20R 14-7SX332A24F 14-7SX332A24P 14-7SX332A24R 14-7SX332A29F 14-7SX332A30F 14-7SX332A30P 14-7SX332A30R 14-7SX332A34F 14-7SX332A34P 14-7SX332A34R 14-7SX332A39F 14-7SX332C10F 14-10SX332C10P 14-10SX332C10R 14-10SX332C14F 14-10SX332C14P 14-10SX332C14R 14-10SX332C19F 14-10SX332C20F 14-10SX332C20P 14-10SX332C20R 14-10SX332C24F 14-10SX332C24P 14-10SX332C24R 14-1019 PRODUCTINDEXSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 19-19

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory Page19PRODUCTINDEXSX332C29F 14-10SX332C30F 14-10SX332C30P 14-10SX332C30R 14-10SX332C34F 14-10SX332C34P 14-10SX332C34R 14-10SX332C39F 14-10SX340A10F 14-7SX340A10P 14-7SX340A10R 14-7SX340A14F 14-7SX340A14P 14-7SX340A14R 14-7SX340A19F 14-7SX340A20F 14-7SX340A20P 14-7SX340A20R 14-7SX340A24F 14-7SX340A24P 14-7SX340A24R 14-7SX340A29F 14-7SX340A30F 14-7SX340A30P 14-7SX340A30R 14-7SX340A34F 14-7SX340A34P 14-7SX340A34R 14-7SX340A39F 14-7SX340C10F 14-10SX340C10P 14-10SX340C10R 14-10SX340C14F 14-10SX340C14P 14-10SX340C14R 14-10SX340C19F 14-10SX340C20F 14-10SX340C20P 14-10SX340C20R 14-10SX340C24F 14-10SX340C24P 14-10SX340C24R 14-10SX340C29F 14-10SX340C30F 14-10SX340C30P 14-10SX340C30R 14-10SX340C34F 14-10SX340C34P 14-10SX340C34R 14-10SX340C39F 14-10SX350C10F 14-10SX350C10P 14-10SX350C10R 14-10SX350C14F 14-10SX350C14P 14-10SX350C14R 14-10SX350C19F 14-10SX350C20F 14-10SX350C20P 14-10SX350C20R 14-10SX350C24F 14-10SX350C24P 14-10SX350C24R 14-10SX350C29F 14-10SX350C30F 14-10SX350C30P 14-10SX350C30R 14-10SX350C34F 14-10SX350C34P 14-10SX350C34R 14-10SX350C39F 14-10SX402A10F 14-5SX402A10P 14-5SX402A10R 14-5SX402A14F 14-5SX402A14P 14-5SX402A14R 14-5SX402A19F 14-5SX402A20F 14-5SX402A20P 14-5SX402A20R 14-5SX402A24F 14-5SX402A24P 14-5SX402A24R 14-5SX402A29F 14-5SX402A30F 14-5SX402A30P 14-5SX402A30R 14-5SX402A34F 14-5SX402A34P 14-5SX402A34R 14-5SX402A39F 14-5SX402C10F 14-8SX402C10P 14-8SX402C10R 14-8SX402C14F 14-8SX402C14P 14-8SX402C14R 14-8SX402C19F 14-8SX402C20F 14-8SX402C20P 14-8SX402C20R 14-8SX402C24F 14-8SX402C24P 14-8SX402C24R 14-8SX402C29F 14-8SX402C30F 14-8SX402C30P 14-8SX402C30R 14-8SX402C34F 14-8SX402C34P 14-8SX402C34R 14-8SX402C39F 14-8SX404A10F 14-5SX404A10P 14-5SX404A10R 14-5SX404A14F 14-5SX404A14P 14-5SX404A14R 14-5SX404A19F 14-5SX404A20F 14-5SX404A20P 14-5SX404A20R 14-5SX404A24F 14-5SX404A24P 14-5SX404A24R 14-5SX404A29F 14-5SX404A30F 14-5SX404A30P 14-5SX404A30R 14-5SX404A34F 14-5SX404A34P 14-5SX404A34R 14-5SX404A39F 14-5SX404C10F 14-8SX404C10P 14-8SX404C10P 14-8SX404C14F 14-8SX404C14P 14-8SX404C14R 14-8SX404C19F 14-8SX404C20F 14-8SX404C20P 14-8SX404C20R 14-8SX404C24F 14-8SX404C24P 14-8SX404C24R 14-8SX404C29F 14-8SX404C30F 14-8SX404C30P 14-8SX404C30R 14-8SX404C34F 14-8SX404C34P 14-8SX404C34R 14-8SX404C39F 14-8SX406A10F 14-5SX406A10P 14-5SX406A10R 14-5SX406A14F 14-5SX406A14P 14-5SX406A14R 14-5SX406A19F 14-5SX406A20F 14-5SX406A20P 14-5SX406A20R 14-5SX406A24F 14-5SX406A24P 14-5SX406A24R 14-5SX406A29F 14-5SX406A30F 14-5SX406A30P 14-5SX406A30R 14-5SX406A34F 14-5SX406A34P 14-5SX406A34R 14-5SX406A39F 14-5SX406C10F 14-8SX406C10P 14-8SX406C10R 14-8SX406C14F 14-8SX406C14P 14-8SX406C14R 14-8SX406C19F 14-8SX406C20F 14-8SX406C20P 14-8SX406C20R 14-8SX406C24F 14-8SX406C24P 14-8SX406C24R 14-8SX406C29F 14-8SX406C30F 14-8SX406C30P 14-8SX406C30R 14-8SX406C34F 14-8SX406C34P 14-8SX406C34R 14-8SX406C39F 14-8SX408A20F 14-5SX408A20P 14-5SX408A20R 14-5SX408A24F 14-5SX408A24P 14-5SX408A24R 14-5SX408A29F 14-5SX408A30F 14-5SX408A30P 14-5SX408A30R 14-5SX408A34F 14-5SX408A34P 14-5SX408A34R 14-5SX408A39F 14-5SX408C10F 14-8SX408C10P 14-8SX408C10R 14-8SX408C14F 14-8SX408C14P 14-8SX408C14R 14-8SX408C19F 14-8SX408C20F 14-8SX408C20P 14-8SX408C20R 14-8SX408C24F 14-8SX408C24P 14-8SX408C24R 14-8SX408C29F 14-8SX408C30F 14-8SX408C30P 14-8SX408C30R 14-8SX408C34F 14-8SX408C34P 14-8SX408C34R 14-8SX408C39F 14-8SX410A10F 14-5SX410A10P 14-5SX410A10R 14-5SX410A14F 14-5SX410A14P 14-5SX410A14R 14-5SX410A19F 14-5SX410A20F 14-5SX410A20P 14-5SX410A20R 14-5SX410A24F 14-5SX410A24P 14-5SX410A24R 14-5SX410A29F 14-5SX410A30F 14-5SX410A30P 14-5SX410A30R 14-5SX410A34F 14-5SX410A34P 14-5SX410A34R 14-5SX410A39F 14-5SX410C10F 14-8SX410C10P 14-8SX410C10R 14-8SX410C14F 14-8SX410C14P 14-8SX410C14R 14-8SX410C19F 14-8SX410C20F 14-8SX410C20P 14-8SX410C20R 14-8SX410C24F 14-8SX410C24P 14-8SX410C24R 14-8SX410C29F 14-8SX410C30F 14-8SX410C30P 14-8SX410C30R 14-8SX410C34F 14-8SX410C34P 14-8SX410C34R 14-8SX410C39F 14-8SX412A10F 14-6SX412A10P 14-6SX412A10R 14-6SX412A14F 14-6SX412A14P 14-6SX412A14R 14-6SX412A19F 14-6SX412A20F 14-6SX412A20P 14-6SX412A20R 14-6SX412A24F 14-6SX412A24P 14-6SX412A24R 14-6SX412A29F 14-6SX412A30F 14-6SX412A30P 14-6SX412A30R 14-6SX412A34F 14-6SX412A34P 14-6SX412A34R 14-6SX412A39F 14-6SX412C10F 14-9SX412C10P 14-9SX412C10R 14-9SX412C14F 14-9SX412C14P 14-9SX412C14R 14-9SX412C19F 14-9SX412C20F 14-9SX412C20P 14-9SX412C20R 14-9SX412C24F 14-9SX412C24P 14-9SX412C24R 14-9SX412C29F 14-9SX412C30F 14-9SX412C30P 14-9SX412C30R 14-9SX412C34F 14-9SX412C34P 14-9SX412C34R 14-9SX412C39F 14-9SX413A10F 14-6SX413A10P 14-6SX413A10R 14-6SX413A14F 14-6SX413A14P 14-6SX413A14R 14-6SX413A19F 14-6SX413A20F 14-6SX413A20P 14-6SX413A20R 14-6SX413A24F 14-6SX413A24P 14-6SX413A24R 14-6SX413A29F 14-6SX413A30F 14-6SX413A30P 14-6SX413A30R 14-6SX413A34F 14-6SX413A34P 14-6SX413A34R 14-6SX413A39F 14-6SX413C10F 14-9SX413C10P 14-9SX413C10R 14-9SX413C14F 14-9SX413C14P 14-9SX413C14R 14-9SX413C19F 14-9SX413C20F 14-9SX413C20P 14-9SX413C20R 14-9SX413C24F 14-9SX413C24P 14-9SX413C24R 14-9SX413C29F 14-9SX413C30F 14-9SX413C30P 14-9SX413C30R 14-9SX413C34F 14-9SX413C34P 14-9SX413C34R 14-9SX413C39F 14-9SX416A10F 14-6SX416A10P 14-6SX416A10R 14-6SX416A14F 14-6SX416A14P 14-6SX416A14R 14-6SX416A19F 14-6SX416A20F 14-6SX416A20P 14-6SX416A20R 14-6SX416A24F 14-6SX416A24P 14-6SX416A24R 14-6SX416A29F 14-6SX416A30F 14-6SX416A30P 14-6SX416A30R 14-6SX416A34F 14-6SX416A34P 14-6SX416A34R 14-6SX416A39F 14-6SX416C10F 14-9SX416C10P 14-9SX416C10R 14-9SX416C14F 14-9SX416C14P 14-9SX416C14R 14-9SX416C19F 14-9SX416C20F 14-9SX416C20P 14-9SX416C20R 14-9SX416C24F 14-9SX416C24P 14-9SX416C24R 14-9SX416C29F 14-9SX416C30F 14-9SX416C30P 14-9SX416C30R 14-9SX416C34F 14-9SX416C34P 14-9SX416C34R 14-9SX416C39F 14-9SX420A10F 14-6SX420A10P 14-6SX420A10R 14-6SX420A14F 14-6SX420A14P 14-6SX420A14R 14-6SX420A19F 14-6SX420A20F 14-6SX420A20P 14-6SX420A20R 14-6SX420A24F 14-6SX420A24P 14-6SX420A24R 14-6SX420A29F 14-6SX420C10F 14-9SX420C10P 14-9SX420C10R 14-9SX420C14F 14-9SX420C14P 14-9SX420C14R 14-9SX420C19F 14-9SX420C20F 14-9SX420C20P 14-9SX420C20R 14-9SX420C24F 14-9SX420C24P 14-9SX420C24R 14-9SX420C29F 14-9SX420C30F 14-9SX420C30P 14-9SX420C30R 14-9SX420C34F 14-9SX420C34P 14-9SX420C34R 14-9SX420C39F 14-9SX425A10F 14-7SX425A10P 14-7SX425A10R 14-7SX425A14F 14-7SX425A14P 14-7SX425A14R 14-7SX425A19F 14-7SX425A20F 14-7SX425A20P 14-7SX425A20R 14-7SX425A24F 14-7SX425A24P 14-7SX425A24R 14-7SX425A29F 14-7SX425A30F 14-719-20Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Product IndexCatalogProductNumber Class PageCatalogProductNumber Class PageCatalogProductNumber Class PageCatalogProductNumber Class PageCatalogProductNumber Class PageSX425A30P 14-7SX425A30R 14-7SX425A34F 14-7SX425A34P 14-7SX425A34R 14-7SX425A39F 14-7SX425C10F 14-9SX425C10P 14-9SX425C10R 14-9SX425C14F 14-9SX425C14P 14-9SX425C14R 14-9SX425C19F 14-9SX425C20F 14-9SX425C20P 14-9SX425C20R 14-9SX425C24F 14-9SX425C24P 14-9SX425C24R 14-9SX425C29F 14-9SX425C30F 14-9SX425C30P 14-9SX425C30R 14-9SX425C34F 14-9SX425C34P 14-9SX425C34R 14-9SX425C39F 14-9SX430A10F 14-7SX430A10P 14-7SX430A10R 14-7SX430A14F 14-7SX430A14P 14-7SX430A14R 14-7SX430A19F 14-7SX430A20F 14-7SX430A20P 14-7SX430A20R 14-7SX430A24F 14-7SX430A24P 14-7SX430A24R 14-7SX430A29F 14-7SX430A30F 14-7SX430A30P 14-7SX430A30R 14-7SX430A34F 14-7SX430A34P 14-7SX430A34R 14-7SX430A39F 14-7SX430C10F 14-10SX430C10P 14-10SX430C10R 14-10SX430C14F 14-10SX430C14P 14-10SX430C14R 14-10SX430C19F 14-10SX430C20F 14-10SX430C20P 14-10SX430C20R 14-10SX430C24F 14-10SX430C24P 14-10SX430C24R 14-10SX430C29F 14-10SX430C30F 14-10SX430C30P 14-10SX430C30R 14-10SX430C34F 14-10SX430C34P 14-10SX430C34R 14-10SX430C39F 14-10SX432A10F 14-7SX432A10F 14-7SX432A10F 14-7SX432A10P 14-7SX432A10P 14-7SX432A10P 14-7SX432A10R 14-7SX432A10R 14-7SX432A10R 14-7SX432A14F 14-7SX432A14F 14-7SX432A14F 14-7SX432A14P 14-7SX432A14P 14-7SX432A14P 14-7SX432A14R 14-7SX432A14R 14-7SX432A14R 14-7SX432A19F 14-7SX432A19F 14-7SX432A19F 14-7SX432A30F 14-7SX432A30P 14-7SX432A30R 14-7SX432A34F 14-7SX432A34P 14-7SX432A34R 14-7SX432A39F 14-7SX432C10F 14-10SX432C10P 14-10SX432C10R 14-10SX432C14F 14-10SX432C14P 14-10SX432C14R 14-10SX432C19F 14-10SX432C20F 14-10SX432C20P 14-10SX432C20R 14-10SX432C24F 14-10SX432C24P 14-10SX432C24R 14-10SX432C29F 14-10SX432C30F 14-10SX432C30P 14-10SX432C30R 14-10SX432C34F 14-10SX432C34P 14-10SX432C34R 14-10SX432C39F 14-10SX440A10F 14-7SX440A10F 14-7SX440A10P 14-7SX440A10P 14-7SX440A10R 14-7SX440A10R 14-7SX440A14F 14-7SX440A14F 14-7SX440A14P 14-7SX440A14P 14-7SX440A14R 14-7SX440A14R 14-7SX440A19F 14-7SX440A19F 14-7SX440A20F 14-7SX440A20P 14-7SX440A20R 14-7SX440A24F 14-7SX440A24P 14-7SX440A24R 14-7SX440A29F 14-7SX440A30F 14-7SX440A30P 14-7SX440A30R 14-7SX440A34F 14-7SX440A34P 14-7SX440A34R 14-7SX440A39F 14-7SX440C10F 14-10SX440C10P 14-10SX440C10R 14-10SX440C14F 14-10SX440C14P 14-10SX440C14R 14-10SX440C19F 14-10SX440C20F 14-10SX440C20P 14-10SX440C20R 14-10SX440C24F 14-10SX440C24P 14-10SX440C24R 14-10SX440C29F 14-10SX440C30F 14-10SX440C30P 14-10SX440C30R 14-10SX440C34F 14-10SX440C34P 14-10SX440C34R 14-10SX440C39F 14-10SX450C10F 14-10SX450C10P 14-10SX450C10R 14-10SX450C14F 14-10SX450C14P 14-10SX450C14R 14-10SX450C19F 14-10SX450C20F 14-10SX450C20P 14-10SX450C20R 14-10SX450C24F 14-10SX450C24P 14-10SX450C24R 14-10SX450C29F 14-10SX450C30F 14-10SX450C30P 14-10SX450C30R 14-10SX450C34F 14-10SX450C34P 14-10SX450C34R 14-10SX450C39F 14-10SX502A10F 14-5SX502A10P 14-5SX502A10R 14-5SX502A14F 14-5SX502A14P 14-5SX502A14R 14-5SX502A19F 14-5SX502A20F 14-5SX502A20P 14-5SX502A20R 14-5SX502A24F 14-5SX502A24P 14-5SX502A24R 14-5SX502A29F 14-5SX502A30F 14-5SX502A30P 14-5SX502A30R 14-5SX502A34F 14-5SX502A34P 14-5SX502A34R 14-5SX502A39F 14-5SX502C10F 14-8SX502C10P 14-8SX502C10R 14-8SX502C14F 14-8SX502C14P 14-8SX502C14R 14-8SX502C19F 14-8SX502C20F 14-8SX502C20P 14-8SX502C20R 14-8SX502C24F 14-8SX502C24P 14-8SX502C24R 14-8SX502C29F 14-8SX502C30F 14-8SX502C30P 14-8SX502C30R 14-8SX502C34F 14-8SX502C34P 14-8SX502C34R 14-8SX502C39F 14-8SX504A10F 14-5SX504A10P 14-5SX504A10R 14-5SX504A14F 14-5SX504A14P 14-5SX504A14R 14-5SX504A19F 14-5SX504A20F 14-5SX504A20P 14-5SX504A20R 14-5SX504A24F 14-5SX504A24P 14-5SX504A24R 14-5SX504A29F 14-5SX504A30F 14-5SX504A30P 14-5SX504A30R 14-5SX504A34F 14-5SX504A34P 14-5SX504A34R 14-5SX504A39F 14-5SX504C10F 14-8SX504C10P 14-8SX504C10R 14-8SX504C14F 14-8SX504C14P 14-8SX504C14R 14-8SX504C19F 14-8SX504C20F 14-8SX504C20P 14-8SX504C20R 14-8SX504C24F 14-8SX504C24P 14-8SX504C24R 14-8SX504C29F 14-8SX504C30F 14-8SX504C30P 14-8SX504C30R 14-8SX504C34F 14-8SX504C34P 14-8SX504C34R 14-8SX504C39F 14-8SX506A10F 14-5SX506A10P 14-5SX506A10R 14-5SX506A14F 14-5SX506A14P 14-5SX506A14R 14-5SX506A19F 14-5SX506A20F 14-5SX506A20P 14-5SX506A20R 14-5SX506A24F 14-5SX506A24P 14-5SX506A24R 14-5SX506A29F 14-5SX506A30F 14-5SX506A30P 14-5SX506A30R 14-5SX506A34F 14-5SX506A34P 14-5SX506A34R 14-5SX506A39F 14-5SX506C10F 14-8SX506C10P 14-8SX506C10R 14-8SX506C14F 14-8SX506C14P 14-8SX506C14R 14-8SX506C19F 14-8SX506C20F 14-8SX506C20P 14-8SX506C20R 14-8SX506C24F 14-8SX506C24P 14-8SX506C24R 14-8SX506C29F 14-8SX506C30F 14-8SX506C30P 14-8SX506C30R 14-8SX506C34F 14-8SX506C34P 14-8SX506C34R 14-8SX506C39F 14-8SX508A10F 14-5SX508A10P 14-5SX508A10R 14-5SX508A14F 14-5SX508A14P 14-5SX508A14R 14-5SX508A19F 14-5SX508A20F 14-5SX508A20P 14-5SX508A20R 14-5SX508A24F 14-5SX508A24P 14-5SX508A24R 14-5SX508A29F 14-5SX508A30F 14-5SX508A30P 14-5SX508A30R 14-5SX508A34F 14-5SX508A34P 14-5SX508A34R 14-5SX508A39F 14-5SX508C10F 14-8SX508C10P 14-8SX508C10R 14-8SX508C14F 14-8SX508C14P 14-8SX508C14R 14-8SX508C19F 14-8SX508C20F 14-8SX508C20P 14-8SX508C20R 14-8SX508C24F 14-8SX508C24P 14-8SX508C24R 14-8SX508C29F 14-8SX508C30F 14-8SX508C30P 14-8SX508C30R 14-8SX508C34F 14-8SX508C34P 14-8SX508C34R 14-8SX508C39F 14-8SX510A10F 14-5SX510A10P 14-5SX510A10R 14-5SX510A14F 14-5SX510A14P 14-5SX510A14R 14-5SX510A19F 14-5SX510A20F 14-5SX510A20P 14-5SX510A20R 14-5SX510A24F 14-5SX510A24P 14-5SX510A24R 14-5SX510A29F 14-5SX510A30F 14-5SX510A30P 14-5SX510A30R 14-5SX510A34F 14-5SX510A34P 14-5SX510A34R 14-5SX510A39F 14-5SX510C10F 14-8SX510C10P 14-8SX510C10R 14-8SX510C14F 14-8SX510C14P 14-8SX510C14R 14-8SX510C19F 14-8SX510C20F 14-8SX510C20P 14-8SX510C20R 14-8SX510C24F 14-8SX510C24P 14-8SX510C24R 14-8SX510C29F 14-8SX510C30F 14-8SX510C30P 14-8SX510C30R 14-8SX510C34F 14-8SX510C34P 14-8SX510C34R 14-8SX510C39F 14-8SX512A10F 14-6SX512A10P 14-6SX512A10R 14-6SX512A14F 14-6SX512A14P 14-6SX512A14R 14-6SX512A19F 14-6SX512A20F 14-6SX512A20P 14-6SX512A20R 14-6SX512A24F 14-6SX512A24P 14-6SX512A24R 14-6SX512A29F 14-6SX512A30F 14-6SX512A30P 14-6SX512A30R 14-6SX512A34F 14-6SX512A34P 14-6SX512A34R 14-6SX512A39F 14-6SX512C10F 14-9SX512C10P 14-9SX512C10R 14-9SX512C14F 14-9SX512C14P 14-9SX512C14R 14-9SX512C19F 14-9SX512C20F 14-9SX512C20P 14-9SX512C20R 14-9SX512C24F 14-9SX512C24P 14-9SX512C24R 14-9SX512C29F 14-9SX512C30F 14-9SX512C30P 14-9SX512C30R 14-9SX512C34F 14-9SX512C34P 14-9SX512C34R 14-9SX512C39F 14-9SX513A10F 14-6SX513A10P 14-6SX513A10R 14-6SX513A14F 14-6SX513A14P 14-6SX513A14R 14-6SX513A19F 14-6SX513A20F 14-6SX513A20P 14-6SX513A20R 14-619 PRODUCTINDEXSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 19-21

Product IndexCatalogProductNumber Class PageCatalogProductNumber Class PageCatalogProductNumber Class PageCatalogProductNumber Class PageCatalogProductNumber Class Page19PRODUCTINDEXSX513A24F 14-6SX513A24P 14-6SX513A24R 14-6SX513A29F 14-6SX513A30F 14-6SX513A30P 14-6SX513A30R 14-6SX513A34F 14-6SX513A34P 14-6SX513A34R 14-6SX513A39F 14-6SX513C10F 14-9SX513C10P 14-9SX513C10R 14-9SX513C14F 14-9SX513C14P 14-9SX513C14R 14-9SX513C19F 14-9SX513C20F 14-9SX513C20P 14-9SX513C20R 14-9SX513C24F 14-9SX513C24P 14-9SX513C24R 14-9SX513C29F 14-9SX513C30F 14-9SX513C30P 14-9SX513C30R 14-9SX513C34F 14-9SX513C34P 14-9SX513C34R 14-9SX513C39F 14-9SX516A10F 14-6SX516A10P 14-6SX516A10R 14-6SX516A14F 14-6SX516A14P 14-6SX516A14R 14-6SX516A19F 14-6SX516A20F 14-6SX516A20P 14-6SX516A20R 14-6SX516A24F 14-6SX516A24P 14-6SX516A24R 14-6SX516A29F 14-6SX516A30F 14-6SX516A30P 14-6SX516A30R 14-6SX516A34F 14-6SX516A34P 14-6SX516A34R 14-6SX516A39F 14-6SX516C10F 14-9SX516C10P 14-9SX516C10R 14-9SX516C14F 14-9SX516C14P 14-9SX516C14R 14-9SX516C19F 14-9SX516C20F 14-9SX516C20P 14-9SX516C20R 14-9SX516C24F 14-9SX516C24P 14-9SX516C24R 14-9SX516C29F 14-9SX516C30F 14-9SX516C30P 14-9SX516C30R 14-9SX516C34F 14-9SX516C34P 14-9SX516C34R 14-9SX516C39F 14-9SX520A10F 14-6SX520A10P 14-6SX520A10R 14-6SX520A14F 14-6SX520A14P 14-6SX520A14R 14-6SX520A19F 14-6SX520A20F 14-6SX520A20F 14-6SX520A20P 14-6SX520A20P 14-6SX520A20R 14-6SX520A20R 14-6SX520A24F 14-6SX520A24F 14-6SX520A24P 14-6SX520A24P 14-6SX520A24R 14-6SX520A24R 14-6SX520A29F 14-6SX520A29F 14-6SX520A30F 14-6SX520A30P 14-6SX520A30R 14-6SX520A34F 14-6SX520A34P 14-6SX520A34R 14-6SX520A39F 14-6SX520C10F 14-9SX520C10P 14-9SX520C10R 14-9SX520C14F 14-9SX520C14P 14-9SX520C14R 14-9SX520C19F 14-9SX520C20F 14-9SX520C20P 14-9SX520C20R 14-9SX520C24F 14-9SX520C24P 14-9SX520C24R 14-9SX520C29F 14-9SX520C30F 14-9SX520C30P 14-9SX520C30R 14-9SX520C34F 14-9SX520C34P 14-9SX520C34R 14-9SX520C39F 14-9SX525A10F 14-7SX525A10P 14-7SX525A10R 14-7SX525A14F 14-7SX525A14P 14-7SX525A14R 14-7SX525A19F 14-7SX525A20F 14-7SX525A20P 14-7SX525A20R 14-7SX525A24F 14-7SX525A24P 14-7SX525A24R 14-7SX525A29F 14-7SX525A30F 14-7SX525A30P 14-7SX525A30R 14-7SX525A34F 14-7SX525A34P 14-7SX525A34R 14-7SX525A39F 14-7SX525C10F 14-9SX525C10P 14-9SX525C10R 14-9SX525C14F 14-9SX525C14P 14-9SX525C14R 14-9SX525C19F 14-9SX525C20F 14-9SX525C20P 14-9SX525C20R 14-9SX525C24F 14-9SX525C24P 14-9SX525C24R 14-9SX525C29F 14-9SX525C30F 14-9SX525C30P 14-9SX525C30R 14-9SX525C34F 14-9SX525C34P 14-9SX525C34R 14-9SX525C39F 14-9SX530A10F 14-7SX530A10P 14-7SX530A10R 14-7SX530A14F 14-7SX530A14P 14-7SX530A14R 14-7SX530A19F 14-7SX530A20F 14-7SX530A20P 14-7SX530A20R 14-7SX530A24F 14-7SX530A24P 14-7SX530A24R 14-7SX530A29F 14-7SX530A30F 14-7SX530A30P 14-7SX530A30R 14-7SX530A34F 14-7SX530A34P 14-7SX530A34R 14-7SX530A39F 14-7SX530C10F 14-10SX530C10P 14-10SX530C10R 14-10SX530C14F 14-10SX530C14P 14-10SX530C14R 14-10SX530C19F 14-10SX530C20F 14-10SX530C20P 14-10SX530C20R 14-10SX530C24F 14-10SX530C24P 14-10SX530C24R 14-10SX530C29F 14-10SX530C30F 14-10SX530C30P 14-10SX530C30R 14-10SX530C34F 14-10SX530C34P 14-10SX530C34R 14-10SX530C39F 14-10SX532A20F 14-7SX532A20P 14-7SX532A20R 14-7SX532A24F 14-7SX532A24P 14-7SX532A24R 14-7SX532A29F 14-7SX532A30F 14-7SX532A30P 14-7SX532A30R 14-7SX532A34F 14-7SX532A34P 14-7SX532A34R 14-7SX532A39F 14-7SX532C10F 14-10SX532C10P 14-10SX532C10R 14-10SX532C14F 14-10SX532C14P 14-10SX532C14R 14-10SX532C19F 14-10SX532C20F 14-10SX532C20P 14-10SX532C20R 14-10SX532C24F 14-10SX532C24P 14-10SX532C24R 14-10SX532C29F 14-10SX532C30F 14-10SX532C30P 14-10SX532C30R 14-10SX532C34F 14-10SX532C34P 14-10SX532C34R 14-10SX532C39F 14-10SX540A20F 14-7SX540A20P 14-7SX540A20R 14-7SX540A24F 14-7SX540A24P 14-7SX540A24R 14-7SX540A29F 14-7SX540A30F 14-7SX540A30P 14-7SX540A30R 14-7SX540A34F 14-7SX540A34P 14-7SX540A34R 14-7SX540A39F 14-7SX540C10F 14-10SX540C10P 14-10SX540C10R 14-10SX540C14F 14-10SX540C14P 14-10SX540C14R 14-10SX540C19F 14-10SX540C20F 14-10SX540C20P 14-10SX540C20R 14-10SX540C24F 14-10SX540C24P 14-10SX540C24R 14-10SX540C29F 14-10SX540C30F 14-10SX540C30P 14-10SX540C30R 14-10SX540C34F 14-10SX540C34P 14-10SX540C34R 14-10SX540C39F 14-10SX550C10F 14-10SX550C10P 14-10SX550C10R 14-10SX550C14F 14-10SX550C14P 14-10SX550C14R 14-10SX550C19F 14-10SX550C20F 14-10SX550C20P 14-10SX550C20R 14-10SX550C24F 14-10SX550C24P 14-10SX550C24R 14-10SX550C29F 14-10SX550C30F 14-10SX550C30P 14-10SX550C30R 14-10SX550C34F 14-10SX550C34P 14-10SX550C34R 14-10SX550C39F 14-10SXBAT 14-12SXDRA1 14-12SXDRA2 14-12SXDRA3 14-12SXDRA4 14-12SXDRA5 14-12SXDRA6 14-12SXDRA7 14-12SXDRC1 14-12SXDRC2 14-12SXDRC3 14-12SXDRC4 14-12SXDRC5 14-12SXDRC6 14-12SXDRC7 14-12SXLK 14-12SXSB 14-12SXSH10 14-12SXSH12 14-12SXSH14 14-12SXSH4 14-12SXSH6 14-12SXSH8 14-12SXSK 14-14SXSK 14-15SXSS1 14-12SXSS2 14-12SXSS3 14-12SXSS4 14-12SXTH1 BUSW 14-12SXTH2 BUSW 14-12SXTH3 14-12SXTH4 14-12SXWH1 14-12SXWH2 14-12SXWH3 14-12SXWH4 14-12T131 BUSW 14-61T132 BUSW 14-61T134 BUSW 14-61T25 14-61T331 BUSW 14-61T332 BUSW 14-61T334 BUSW 14-61T35 BUSW 14-61T431 BUSW 14-62TA12JG04 6-135TA1DG30 MCCB 6-134TA1E6125 MCCB 6-82TA1E6125 MCCB 6-82TA1FD350A MCCB 6-37TA1FD350A MCCB 6-82TA1JG750 MCCB 6-135TA1JG750 MCCB 6-135TA1L6750 MCCB 6-40TA1L6750 MCCB 6-42TA1L6750 MCCB 6-42TA1L6750 MCCB 6-44TA1L6750 MCCB 6-83TA1Q1 MCCB 6-27TA1Q1 MCCB 6-81TA1Q300 MCCB 6-82TA2J630 MCCB 6-42TA2J630 MCCB 6-82TA2J6500 MCCB 6-40TA2J6500 MCCB 6-42TA2J6500 MCCB 6-42TA2J6500 MCCB 6-44TA2J6500 MCCB 6-82TA2J6500 MCCB 6-82TA2JG250 MCCB 6-135TA2K500 MCCB 4-22TA2K500 MCCB 6-48TA2K500 MCCB 6-51TA2K500 MCCB 6-53TA2K500 MCCB 6-55TA2K500 MCCB 6-82TA2MG750 MCCB 6-135TA2N750 MCCB 6-48TA2N750 MCCB 6-82TA3DG02 6-134TA3FG20 6-134TA3H750 MCCB 4-22TA3K500 MCCB 4-22TA3K500 MCCB 6-48TA3K500 MCCB 6-51TA3K500 MCCB 6-53TA3K500 MCCB 6-55TA3K500 MCCB 6-82TA3MG500 MCCB 6-135TA3NG750 6-135TA4H500 MCCB 4-22TA4P750 MCCB 6-120TA4P750 MCCB 6-135TA4P750 MCCB 6-59TA4P750 MCCB 6-62TA4P750 MCCB 6-83TA5P600 MCCB 6-120TA5P600 MCCB 6-135TA5P600 MCCB 6-59TA5P600 MCCB 6-59TA5P600 MCCB 6-59TA5P600 MCCB 6-59TA5P600 MCCB 6-60TA5P600 MCCB 6-62TA5P600 MCCB 6-82TA6DG04 6-134TA6ED06 MCCB 6-83TA6FD04 MCCB 6-83TA6FG04 6-134TA6JD20 MCCB 6-83TA6JG20 6-135TA6R600 MCCB 6-120TA6R600 MCCB 6-135TA6R600 MCCB 6-59TA6R600 MCCB 6-60TA6R600 MCCB 6-62TA6R600 MCCB 6-82TA6R600STD 6-64TAW1FG350 MCCB 6-134TBTH BPLU 14-61TBTH202R BPLU 14-61TBTH302F BPLU 14-61TBTH306F BPLU 14-61TC1DG30 6-134TC1ED6150 MCCB 6-83TC1FD350 MCCB 6-37TC1FD350 MCCB 6-83TC1J6600 MCCB 6-40TC1J6600 MCCB 6-42TC1J6600 MCCB 6-44TC1J6600 MCCB 6-83TC1JG750 6-104TC1JG750 6-135TC1Q1 MCCB 6-27TC1Q1 MCCB 6-30TC1Q1 MCCB 6-81TC1Q1 MCCB 6-81TC1Q250 MCCB 6-83TC2J6500 MCCB 6-40TC2J6500 MCCB 6-42TC2J6500 MCCB 6-44TC2J6500 MCCB 6-83TC2JG250 6-104TC2JG250 6-135TC2K500 MCCB 4-22TC2K500 MCCB 6-51TC2K500 MCCB 6-53TC2K500 MCCB 6-55TC2K500 MCCB 6-83TC3K350 MCCB 4-22TC3K350 MCCB 6-5119-22Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory PageTC3K350 MCCB 6-53TC3K350 MCCB 6-55TC3K350 MCCB 6-83TC3MG500 6-112TC3MG500 6-135TC3NG500 6-135TC5R600 MCCB 6-120TC5R600 MCCB 6-135TC5R600 MCCB 6-59TC5R600 MCCB 6-60TC5R600 MCCB 6-62TC5R600 MCCB 6-62TC5R600 MCCB 6-62TC5R600 MCCB 6-62TC5R600 MCCB 6-83TCE2 MCCB 6-91TCE3 MCCB 6-91TCF2 MCCB 6-91TCF3 MCCB 6-91TCJ2 MCCB 6-91TCJ3 MCCB 6-91TCL2 MCCB 6-91TCL3 MCCB 6-91TCM2 MCCB 6-91TCM3 MCCB 6-91TCN2 MCCB 6-91TCN3 MCCB 6-91TCW1FG350 6-134TD010 14-60TD010R 14-60TD210 BUSW 14-60TD210R BUSW 14-60TD210RS 14-60TD310 BUSW 14-60TD310R BUSW 14-60TD310RS 14-60TD410 BUSW 14-62TD410R BUSW 14-62TD410RS 14-62TD63S2000 6-72TD63S2500 6-72TD63S3200 6-72TDF3 BUSW 14-60TDF4 BUSW 14-62TDH3 BUSW 14-60TDH4 BUSW 14-62TFAK32 HDSS 14-57TFAK32 HDSS 14-57TFAK32 HDSS 4-21TFAK35 HDSS 14-57TFAK35 HDSS 14-57TFAK35 HDSS 4-21TFAK42 HDSS 14-57TFAK42 HDSS 14-57TFAK42 HDSS 4-21TFAK45 HDSS 14-57TFAK45 HDSS 14-57TFAK45 HDSS 4-21TFAK52 HDSS 12-23TFAK52 HDSS 14-57TFAK52 HDSS 14-57TFAK52 HDSS 4-21TFAK55 HDSS 12-23TFAK55 HDSS 14-57TFAK55 HDSS 14-57TFAK55 HDSS 4-21TFAK62 HDSS 12-23TFAK62 HDSS 14-57TFAK62 HDSS 14-57TFAK62 HDSS 4-21TFAK65 HDSS 12-23TFAK65 HDSS 14-57TFAK65 HDSS 14-57TFAK65 HDSS 4-21TFAK72 HDSS 3-17TFAK72 HDSS 4-22TFAK75 HDSS 3-17TFAK75 HDSS 4-21TFAK75 HDSS 4-22TFAK82 HDSS 3-17TFAK82 HDSS 4-22TFP223 HDSS 4-24TFP224 HDSS 4-24TFP323 HDSS 4-24TFP324 HDSS 4-24TFP363 HDSS 4-24TFP364 HDSS 4-24THEL 6-139THEL 6-139THEM MCCB 6-139THEP MCCB 6-139THEP MCCB 6-139TLK11Q XFMR 7-19TLK12Q XFMR 7-19TLK13Q XFMR 7-19TLK14Q XFMR 7-19TLK15Q XFMR 7-19TLK31Q XFMR 7-19TLK32Q XFMR 7-19TLK33Q XFMR 7-19TLK34Q XFMR 7-19TLK35Q XFMR 7-19TLK36Q XFMR 7-19TLK37Q XFMR 7-19TLK38Q XFMR 7-19TLK39Q XFMR 7-19TMK606 HDSS 4-11TMK606 HDSS 4-11TMK610 HDSS 4-11TMK610C HDSS 4-11TMK620 HDSS 4-11TMK620C HDSS 4-11TMKJ MCCB 6-135TMKJ3 6-135TNKD MCCB 6-134TNKD3 MCCB 6-134TNKE3 MCCB 6-32TNKE3 MCCB 6-81TNKE4 6-81TNKF MCCB 6-134TNKF3 MCCB 6-134TNKG3 MCCB 6-30TNKG3 MCCB 6-81TNKL MCCB 6-135TNKL3 MCCB 6-135TNKM 6-135TNKM3 MCCB 6-135TNKP MCCB 6-135TNKP MCCB 6-135TNKP3 MCCB 6-135TNKP3 MCCB 6-135TPSA9040 RESI 1-33TPSASA1 RESI 1-33TPSCOAX RESI 1-34TPSESA3 RESI 1-33TPSTEL RESI 1-34TPTH BPLU 14-61TR1311 14-61TR1312 BUSW 14-61TR3311 BUSW 14-61TR3312 BUSW 14-61TRB23 BUSW 14-60TRB23 BUSW 14-62TRH31 BUSW 14-60TRH31 BUSW 14-62TS31 MCCB 6-79TS31CABLE MCCB 6-79TSCFTM MCCB 6-136TSCFTM MCCB 6-136TSCLTM MCCB 6-137TSCLTM MCCB 6-137TSCMTM MCCB 6-137TSCPET MCCB 6-136TSCPET MCCB 6-136TSCPET MCCB 6-137TSCPET MCCB 6-137TSCPET MCCB 6-137TSCPET MCCB 6-137TSCPET MCCB 6-137TSLF3 MCCB 6-132TSLF3 MCCB 6-132TSLL3 6-133TSLL3 6-133TSLM3 6-133TSLP3 MCCB 6-133TSLP3 MCCB 6-133TSSF3 6-132TSSF3 6-132TSSG3A 6-86TSSL3 6-133TSSL3 6-133TSSM3 6-133TSSP3 MCCB 6-133TSSP3 MCCB 6-133TW1DG20 MCCB 6-134TW1FG350 6-134TW1JG600 6-135U01ED60 MCCB 6-36U01ED62A MCCB 6-36U01ED62AA MCCB 6-36U01ED62AB MCCB 6-36U01ED62B MCCB 6-36U01FD60 MCCB 6-39U01JLD6 MCCB 6-43U01JLD6 MCCB 6-43U01JLD6 MCCB 6-47U01JLD6 MCCB 6-50U01JLD62A MCCB 6-43U01JLD62A MCCB 6-47U01JLD62A MCCB 6-50U01JLD62AA MCCB 6-43U01JLD62AA MCCB 6-47U01JLD62AA MCCB 6-50U01MN6 MCCB 6-54U01MN6 MCCB 6-58U01MN6 MCCB 6-61U01MN6 MCCB 6-63U01MN64A MCCB 6-54U01MN64A MCCB 6-58U01MN64A MCCB 6-61U01MN64A MCCB 6-63U01MN64AA MCCB 6-54U01MN64AA MCCB 6-58U01MN64AA MCCB 6-61U01MN64AA MCCB 6-63U02FD60 MCCB 6-39U02JLD6 MCCB 6-47U02JLD6 MCCB 6-50U02JLD62A MCCB 6-43U02JLD62A MCCB 6-47U02JLD62A MCCB 6-50U02JLD62AA MCCB 6-43U02JLD62AA MCCB 6-47U02JLD62AA MCCB 6-50U02MN6 MCCB 6-54U02MN6 MCCB 6-58U02MN6 MCCB 6-61U02MN6 MCCB 6-63U02MN64A MCCB 6-54U02MN64A MCCB 6-58U02MN64A MCCB 6-61U02MN64A MCCB 6-63U02MN64AA MCCB 6-54U02MN64AA MCCB 6-58U02MN64AA MCCB 6-61U02MN64AA MCCB 6-63U03FD60 MCCB 6-39U03JLD6 MCCB 6-43U03JLD6 MCCB 6-43U03JLD6 MCCB 6-47U03JLD6 MCCB 6-50U03JLD62A MCCB 6-43U03JLD62A MCCB 6-47U03JLD62A MCCB 6-50U03JLD62AA MCCB 6-43U03JLD62AA MCCB 6-47U03JLD62AA MCCB 6-50U03MN6 MCCB 6-54U03MN6 MCCB 6-54U03MN6 MCCB 6-58U03MN6 MCCB 6-61U03MN6 MCCB 6-63U03MN64A MCCB 6-54U03MN64A MCCB 6-58U03MN64A MCCB 6-61U03MN64A MCCB 6-63U03MN64AA MCCB 6-54U03MN64AA MCCB 6-58U03MN64AA MCCB 6-61U03MN64AA MCCB 6-63U04MN6 MCCB 6-54U04MN6 MCCB 6-58U04MN6 MCCB 6-61U04MN6 MCCB 6-63U04MN64A MCCB 6-54U04MN64A MCCB 6-58U04MN64A MCCB 6-61U04MN64A MCCB 6-63U04MN64AA MCCB 6-54U04MN64AA MCCB 6-58U04MN64AA MCCB 6-61U04MN64AA MCCB 6-63U06FD60 MCCB 6-39U06JLD6 MCCB 6-43U06JLD6 MCCB 6-47U06JLD6 MCCB 6-50U06JLD64A MCCB 6-43U06JLD64A MCCB 6-47U06JLD64A MCCB 6-50U06JLD64AA MCCB 6-43U06JLD64AA MCCB 6-47U06JLD64AA MCCB 6-50U06MN6 MCCB 6-54U06MN6 MCCB 6-58U06MN6 MCCB 6-61U06MN6 MCCB 6-63U07MN6 MCCB 6-54U07MN6 MCCB 6-58U07MN6 MCCB 6-61U07MN6 MCCB 6-63U07MN64A MCCB 6-54U07MN64A MCCB 6-58U07MN64A MCCB 6-61U07MN64A MCCB 6-63U07MN64AA MCCB 6-54U07MN64AA MCCB 6-58U07MN64AA MCCB 6-61U07MN64AA MCCB 6-63U08FD60 MCCB 6-39U08JLD6 MCCB 6-43U08JLD6 MCCB 6-47U08JLD6 MCCB 6-50U09MN6 MCCB 6-54U09MN6 MCCB 6-58U09MN6 MCCB 6-61U09MN6 MCCB 6-63U09MN64A MCCB 6-54U09MN64A MCCB 6-58U09MN64A MCCB 6-61U09MN64A MCCB 6-63U09MN64AA MCCB 6-54U09MN64AA MCCB 6-58U09MN64AA MCCB 6-61U09MN64AA MCCB 6-63U10FD60 MCCB 6-39U10JLD6 MCCB 6-43U10JLD6 MCCB 6-47U10JLD6 MCCB 6-50U10JLD62A MCCB 6-43U10JLD62A MCCB 6-47U10JLD62A MCCB 6-50U10JLD62AA MCCB 6-43U10JLD62AA MCCB 6-47U10JLD62AA MCCB 6-50U11MN6 MCCB 6-54U11MN6 MCCB 6-58U11MN6 MCCB 6-61U11MN6 MCCB 6-63U11MN64A MCCB 6-54U11MN64A MCCB 6-58U11MN64A MCCB 6-61U11MN64A MCCB 6-63U11MN64AA MCCB 6-54U11MN64AA MCCB 6-58U11MN64AA MCCB 6-61U11MN64AA MCCB 6-63U12FD60 MCCB 6-39U12JLD6 MCCB 6-43U12JLD6 MCCB 6-47U12JLD6 MCCB 6-50U12JLD62A MCCB 6-43U12JLD62A MCCB 6-47U12JLD62A MCCB 6-50U12JLD62AA MCCB 6-43U12JLD62AA MCCB 6-47U12JLD62AA MCCB 6-50U13FD60 MCCB 6-39U13JLD6 MCCB 6-43U13JLD6 MCCB 6-47U13JLD6 MCCB 6-50U13JLD62A MCCB 6-43U13JLD62A MCCB 6-47U13JLD62A MCCB 6-50U13JLD62AA MCCB 6-43U13JLD62AA MCCB 6-47U13JLD62AA MCCB 6-50U13MN6 MCCB 6-54U13MN6 MCCB 6-58U13MN6 MCCB 6-61U13MN6 MCCB 6-63U13MN64A MCCB 6-54U13MN64A MCCB 6-58U13MN64A MCCB 6-61U13MN64A MCCB 6-63U13MN64AA MCCB 6-54U13MN64AA MCCB 6-58U13MN64AA MCCB 6-61U13MN64AA MCCB 6-63U14FD60 MCCB 6-39U14JLD6 MCCB 6-43U14JLD6 MCCB 6-47U14JLD6 MCCB 6-50U14JLD62A MCCB 6-43U14JLD62A MCCB 6-47U14JLD62A MCCB 6-50U14JLD62AA MCCB 6-43U14JLD62AA MCCB 6-47U14JLD62AA MCCB 6-50U15MN6 MCCB 6-58U15MN6 MCCB 6-61U15MN6 MCCB 6-63U15MN64A MCCB 6-54U15MN64A MCCB 6-58U15MN64A MCCB 6-61U15MN64A MCCB 6-63U15MN64AA MCCB 6-54U15MN64AA MCCB 6-58U15MN64AA MCCB 6-61U15MN64AA MCCB 6-63U16FD60 MCCB 6-39U16JLD6 MCCB 6-47U16JLD6 MCCB 6-50U16JLD62AA MCCB 6-43U16JLD62AA MCCB 6-47U16JLD62AA MCCB 6-50U16JLD64A MCCB 6-43U16JLD64A MCCB 6-47U16JLD64A MCCB 6-50UE145 14-53UE145 14-53UE145 14-53UE145 14-53UE145 14-53UE145 14-53UE145 14-53UE145 14-55UE145 14-55UE145 14-55UE145 14-55UE145 14-55UE145 14-55UE145 14-55UE145 14-55UE145 14-55UE145 14-55UE145 14-55UE145 14-55UE155 14-53UE155 14-53UE155 14-53UE155 14-53UE155 14-53UE155 14-53UE155 14-55UE155 14-55UE155 14-55UE155 14-55UE175 14-53UE175 14-53UE175 14-53UE175 14-53UE175 14-53UE175 14-55UE195 14-53UE195 14-55UE195 14-55UE195 14-55UE275 14-53UE275 14-53UE275 14-55UE275 14-55UE295 14-53UE295 14-53UE295 14-53UE295 14-53UE295 14-55UE295 14-55UE295 14-55UE295 14-55UE295 14-55UE295 14-55UF145 14-53UF145 14-53UF145 14-53UF145 14-53UF145 14-53UF145 14-53UF145 14-53UF145 14-53UF145 14-5319 PRODUCTINDEXSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 19-23

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory Page19PRODUCTINDEXUF145 14-53UF145 14-55UF145 14-55UF145 14-55UF145 14-55UF145 14-55UF145 14-55UF145 14-55UF145 14-55UF145 14-55UF145 14-55UF145 14-55UF145 14-55UF145 14-55UF145 14-55UF145 14-55UF145 14-55UF145 14-55UF145 14-55UF145 14-55UF145 14-55UF155 14-53UF155 14-53UF155 14-53UF155 14-53UF155 14-55UF155 14-55UF155 14-55UF155 14-55UF155 14-55UF175 14-53UF175 14-53UF175 14-53UF175 14-53UF175 14-55UF195 14-53UF195 14-53UF195 14-55UF195 14-55UF275 14-53UF275 14-53UF275 14-55UF275 14-55UF275 14-55UF275 14-55UF295 14-53UF295 14-53UF295 14-53UF295 14-53UF295 14-55UF295 14-55UF295 14-55UF295 14-55UFS145 14-53UFS145 14-53UFS145 14-53UFS145 14-53UFS145 14-53UFS145 14-53UFS145 14-53UFS145 14-53UFS145 14-53UFS145 14-53UFS145 14-53UFS145 14-53UFS145 14-53UFS145 14-53UFS145 14-55UFS145 14-55UFS145 14-55UFS145 14-55UFS145 14-55UFS145 14-55UFS145 14-55UFS145 14-55UFS145 14-55UFS145 14-55UFS145 14-55UFS145 14-55UFS145 14-55UFS145 14-55UFS145 14-55UFS145 14-55UFS179 14-53UFS179 14-53UFS179 14-53UFS179 14-53UFS179 14-53UFS179 14-53UFS179 14-55UFS179 14-55UFS179 14-55UFS179 14-55UFS279 14-53UFS279 14-53UFS279 14-53UFS279 14-53UFS279 14-53UFS279 14-53UFS279 14-55UFS279 14-55UFS279 14-55UFS279 14-55UFS279 14-55UFS279 14-55UFS279 14-55UFS279 14-55UH145 14-53UH145 14-53UH145 14-53UH145 14-53UH145 14-53UH145 14-53UH145 14-53UH145 14-55UH145 14-55UH145 14-55UH145 14-55UH145 14-55UH145 14-55UH145 14-55UH145 14-55UH145 14-55UH145 14-55UH145 14-55UH145 14-55UH155 14-53UH155 14-53UH155 14-53UH155 14-53UH155 14-53UH155 14-53UH155 14-55UH155 14-55UH155 14-55UH155 14-55UH175 14-53UH175 14-53UH175 14-53UH175 14-53UH175 14-55UH175 14-55UH195 14-53UH195 14-53UH195 14-55UH195 14-55UH275 14-53UH275 14-53UH275 14-55UH275 14-55UH275 14-55UH275 14-55UH295 14-53UH295 14-53UH295 14-53UH295 14-53UH295 14-55UH295 14-55UH295 14-55UH295 14-55UJ100 BUSW 14-51UK1000TA RESG 2-26UK350TA RESG 2-26UK600TA RESG 2-26UPAPELTK 6-138UPAPELTK 6-138UPAPELTK 6-139UPAPELTK 6-139UPAPELTK 6-139UPAPELTK 6-139UPAPELTK 6-139UPGR314G BPLU 14-58UVREA12AD 6-25UVREB24AD MCCB 6-25UVREB24AD MCCB 6-33UVREC48D MCCB 6-25UVREC48D MCCB 6-33UVRED125D MCCB 6-25UVRED125D MCCB 6-33UVREE250D MCCB 6-25UVREE250D MCCB 6-33UVREM60 MCCB 6-25UVREM60 MCCB 6-33UVREN120 MCCB 6-25UVREN120 MCCB 6-33UVRER240 MCCB 6-25UVRER240 MCCB 6-33UVREU480 MCCB 6-25UVREU480 MCCB 6-33UVREV600 MCCB 6-25UVREV600 MCCB 6-33UVRLA12DC 6-103UVRLA12DC 6-107UVRLA12DC 6-111UVRLA12DC 6-99UVRLB24DC 6-103UVRLB24DC 6-107UVRLB24DC 6-111UVRLB24DC 6-99UVRLC48DC MCCB 6-103UVRLC48DC MCCB 6-107UVRLC48DC MCCB 6-111UVRLC48DC MCCB 6-99UVRLD125DC MCCB 6-103UVRLD125DC MCCB 6-107UVRLD125DC MCCB 6-111UVRLD125DC MCCB 6-99UVRLE250 6-103UVRLE250DC MCCB 6-107UVRLE250DC MCCB 6-111UVRLE250DC MCCB 6-99UVRLG60DC MCCB 6-103UVRLG60DC MCCB 6-107UVRLG60DC MCCB 6-111UVRLG60DC MCCB 6-99UVRLN120 MCCB 6-103UVRLN120 MCCB 6-107UVRLN120 MCCB 6-111UVRLN120 MCCB 6-99UVRLP208 MCCB 6-103UVRLP208 MCCB 6-107UVRLP208 MCCB 6-111UVRLP208 MCCB 6-99UVRLR240 6-103UVRLR240 6-107UVRLR240 6-111UVRLR240 6-99UVRLS277 MCCB 6-103UVRLS277 MCCB 6-107UVRLS277 MCCB 6-111UVRLS277 MCCB 6-99UVRLT415 MCCB 6-103UVRLT415 MCCB 6-107UVRLT415 MCCB 6-111UVRLT415 MCCB 6-99UVRLU480 MCCB 6-103UVRLU480 MCCB 6-107UVRLU480 MCCB 6-111UVRLU480 MCCB 6-99UVRLV600 MCCB 6-103UVRLV600 MCCB 6-107UVRLV600 MCCB 6-111UVRLV600 MCCB 6-99UVRPA12DC MCCB 6-115UVRPA12DC MCCB 6-119UVRPA12DC MCCB 6-122UVRPB24DC MCCB 6-115UVRPB24DC MCCB 6-119UVRPB24DC MCCB 6-122UVRPC48DC MCCB 6-115UVRPC48DC MCCB 6-119UVRPC48DC MCCB 6-122UVRPD125DC MCCB 6-115UVRPD125DC MCCB 6-119UVRPD125DC MCCB 6-122UVRPE250DC MCCB 6-115UVRPE250DC MCCB 6-119UVRPE250DC MCCB 6-122UVRPG60DC MCCB 6-115UVRPG60DC MCCB 6-119UVRPG60DC MCCB 6-122UVRPN120 MCCB 6-115UVRPN120 MCCB 6-119UVRPN120 MCCB 6-122UVRPP208 MCCB 6-115UVRPP208 MCCB 6-119UVRPP208 MCCB 6-122UVRPR240 MCCB 6-115UVRPR240 MCCB 6-119UVRPR240 MCCB 6-122UVRPS277 MCCB 6-115UVRPS277 MCCB 6-119UVRPS277 MCCB 6-122UVRPT415 MCCB 6-115UVRPT415 MCCB 6-119UVRPT415 MCCB 6-122UVRPU480 MCCB 6-115UVRPU480 MCCB 6-119UVRPU480 MCCB 6-122UVRPV600 MCCB 6-115UVRPV600 MCCB 6-119UVRPV600 MCCB 6-122UX001WL 2-85UX005B RESG 2-85V2A2211LR VBSS 4-18V2A3211 VBSS 4-18V2B2211LR VBSS 4-18V2B2212LR VBSS 4-18V2B2222LR VBSS 4-18V2B3211 VBSS 4-18V2B3211R VBSS 4-18V2B3212 VBSS 4-18V2B3212R VBSS 4-18V2B3222 VBSS 4-18V2B3222R VBSS 4-18V2E2203LR VBSS 4-18V2E2204LR VBSS 4-18V2E3203 VBSS 4-18V2F3204 VBSS 4-18V2F3204MS VBSS 4-18V7A2211__ 4-19V7A3211 VBSS 4-19V7B2211__ 4-19V7B2211__R 4-19V7B2212LR VBSS 4-19V7B2212LRR VBSS 4-19V7B2222__ 4-19V7B2222__R 4-19V7B3211 VBSS 4-19V7B3211R VBSS 4-19V7B3212 VBSS 4-19V7B3212R VBSS 4-19V7B3222 VBSS 4-19V7B3222R VBSS 4-19V7E2203LR 4-19V7E2204__ 4-19V7E2204MS VBSS 4-19V7E2223LR VBSS 4-19V7E2233__ 4-19V7E2603LR VBSS 4-20V7E2611LR VBSS 4-20V7E2612LR VBSS 4-20V7E2622LR VBSS 4-20V7E3202 VBSS 4-19V7E3203 VBSS 4-19V7E3203MS VBSS 4-19V7E3223 VBSS 4-19V7E3233 VBSS 4-19V7E3233R VBSS 4-19V7E3601 VBSS 4-20V7E3602 VBSS 4-20V7E3603 VBSS 4-20V7E3603MS VBSS 4-20V7E3611 VBSS 4-20V7E3611R VBSS 4-20V7E3612 VBSS 4-20V7E3622 VBSS 4-20V7E3622R VBSS 4-20V7E3623 VBSS 4-20V7E3633 VBSS 4-20V7E3633R VBSS 4-20V7F2604LR VBSS 4-20V7F3204 VBSS 4-19V7F3204MS VBSS 4-19V7F3244R VBSS 4-19V7F3604 VBSS 4-20V7F3604MS VBSS 4-20V7F3604R VBSS 4-20V7F3644 VBSS 4-19V7F3644J VBSS 4-20V7H2205LR VBSS 4-19V7H2205MS VBSS 4-19V7H2206LR VBSS 4-19V7H2206MS VBSS 4-19V7H2605MR VBSS 4-20V7H3205 VBSS 4-19V7H3205750 VBSS 4-19V7H3205MS VBSS 4-19V7H3206 VBSS 4-19V7H3206MS VBSS 4-19V7H3605 VBSS 4-20V7H3605750 VBSS 4-20V7H3605MS VBSS 4-20V7H3606 VBSS 4-20V7H3606MS VBSS 4-20VB2F025 10-73VB2F050 10-73VB2F075 10-73VB2F100 10-73VB2F100 10-73VB357BL VBSS 4-20VB358BL VBSS 4-20VB610 SWBD 12-26VB6150 SWBD 12-26VB6150 SWBD 4-21VB6150 SWBD 4-21VB657 SWBD 12-26VB657 SWBD 4-21VB657 SWBD 4-21VB657 SWBD 4-21VB657 SWBD 4-21VB657 SWBD 4-21VB657 SWBD 4-21VB671 SWBD 12-26VB671 SWBD 4-21VB7F025 10-73VB7F050 10-73VB7F075 10-73VBFS321 HDSS 4-7VBFS321F HDSS 4-7VBFS322 HDSS 4-7VBFS322F HDSS 4-7VBFS361 HDSS 4-7VBFS361F HDSS 4-7VBFS362 HDSS 4-7VBFS362F HDSS 4-7VBFS363 HDSS 4-7VBFS363F HDSS 4-7VBFS364 HDSS 4-7VBFS364F HDSS 4-7VBFS365 HDSS 4-7VBFS366 HDSS 4-7VBH1 HDSS 4-7VBH14X HDSS 4-7VBH2 HDSS 4-7VBHM1 HDSS 4-7VBLK1 HDSS 4-7VBLK2 HDSS 4-7VBLK3 HDSS 4-7VBLK4 HDSS 4-7VBNFS361 HDSS 4-7VBNFS361F HDSS 4-7VBNFS362 HDSS 4-7VBNFS362F HDSS 4-7VBNFS363 HDSS 4-7VBNFS363F HDSS 4-7VBNFS364 HDSS 4-7VBNFS364F HDSS 4-7VBNFS365 HDSS 4-7VBNFS366 HDSS 4-7VBWK1 HDSS 4-8VBWK2 HDSS 4-8VBWK3 HDSS 4-8VF357TL VBSS 4-20VF358TL VBSS 4-20VH9499 MCCB 6-88VMS325B VBSS 4-19VMS325T VBSS 4-19VMS326B VBSS 4-19VMS326T VBSS 4-19VMS365B VBSS 4-20VMS365T VBSS 4-20VMS366B VBSS 4-20VMS366T VBSS 4-20W01FD64 MCCB 6-39W0202MB1100CU RESI 1-10W0202MB1200CU RESI 1-10W0202ML1200CU RESI 1-10W0204ML1060 RESI 1-10W0204ML1060 RESI 5-10W0204ML1125CU RESI 1-10W02FD64 MCCB 6-39W0303ML3100 RESI 1-10W0303ML3100 RESI 5-10W03FD64 MCCB 6-39W0404MB1200CT RESI 1-13W0404MB1200CT RESI 1-9W0406ML1225CU RESI 1-10W0406ML1225CU RESI 1-9W0406ML1225CU RESI 5-1019-24Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory PageW0408L1125SPA50 RESI 1-13W0408L1125SPA50 RESI 1-9W0408L1125SPA60 RESI 1-13W0408L1125SPA60 RESI 1-9W0408ML1125 RESI 1-9W0606ML1400CU RESI 1-12W06FD64 MCCB 6-39W0816B1200CT RESI 1-13W0816B1200CT RESI 1-7W0816L1200CT RESI 1-13W0816L1200CT RESI 1-7W0816ML1125CU RESI 1-9W10FD64 MCCB 6-39W1212L1125CU RESI 1-7W1224B10060GC RESI 1-13W1224B1100CU RESI 1-7W1224L1125CU RESI 1-7W1224L1200CU RESI 1-7W1224L1225CU RESI 1-7W1224L3125CU RESI 1-11W1224L3200CU RESI 1-11W12FD64 MCCB 6-39W13FD64 MCCB 6-39W14FD64 MCCB 6-39W1624B1100CU RESI 1-7W1624L1125CU RESI 1-7W16FD64 MCCB 6-39W1836L3150CU RESI 1-11W1MM1225U RESG 2-47W1MM1225USS RESG 2-51W1MM1400 RESG 2-47W1MM1400B RESG 2-50W1MM2225U RESG 2-47W1MM2225USS RESG 2-51W1MM2400 RESG 2-47W1MM3225U RESG 2-47W1MM3225USS RESG 2-51W1MM4225U RESG 2-47W2020B1100CU RESI 1-7W2030L1150CU RESI 1-7W2040B1200CU RESI 1-7W2040L1200CU RESI 1-7W2424L1125CU RESI 1-7W2442B3150CU RESI 1-11W2442L3150CU RESI 1-11W2442L3200CU RESI 1-11W2MM1225U RESG 2-48W2MM1225USS RESG 2-51W2MM1400AB RESG 2-48W2MM1400BAB RESG 2-50W2MM2400AB RESG 2-48W2MM2AB225U RESG 2-48W2MM2AB225USS RESG 2-51W2MM2BC225U RESG 2-48W2MM2BC225USS RESG 2-51W2MM2CA225U RESG 2-48W2MM2CA225USS RESG 2-51W2MM3225U RESG 2-48W2MM3225USS RESG 2-51W2MM4AB225U RESG 2-48W2MM4BC225U RESG 2-48W2MM4CA225U RESG 2-48W3030MB1400CU RESI 1-12W3030ML1400CU RESI 1-12W3040B1200CP RESI 1-8W3040B1200CU RESI 1-7W3040L1125CU RESI 1-7W3040L1200CP RESI 1-8W3040L1200CU RESI 1-7W3042B3200CU RESI 1-11W3042L3200CU RESI 1-11W37940 BPLU 14-57W37940 BPLU 14-58W3MM1 RESG 2-49W3MM1200U RESG 2-49W3MM1225USS RESG 2-51W3MM1400 RESG 2-49W3MM1400B RESG 2-50W3MM2 RESG 2-49W3MM2200U RESG 2-49W3MM2225USS RESG 2-51W3MM2400 2-49W3MM3 RESG 2-49W3MM3200U RESG 2-49W3MM3225USS RESG 2-51W3MM4 RESG 2-49W3MM4200U RESG 2-49W4040B1200CP RESI 1-8W4040B1200CU RESI 1-7W4040L1200CP RESI 1-8W4040L1200CU RESI 1-7W410190 HDSS 3-17W411239 HDSS 5-11W411239 HDSS 5-13W411239 HDSS 5-5W411239 HDSS 5-6W411239 HDSS 5-7W411239 HDSS 5-9W4242B1225CU RESI 1-7W4242B3200CU RESI 1-11W4242B3225CU RESI 1-11W4242L1225CU RESI 1-7W4242L3225CU RESI 1-11W4242MB1400CU RESI 1-12W4242MB3400CU RESI 1-12W4242ML1400CU RESI 1-12W4242ML3400CU RESI 1-12W43000 4-21W43002 4-21W43099 BPLU 14-60W43099 BPLU 14-62W43100 BPLU 14-60W43100 BPLU 14-62W43101 BPLU 14-60W43101 BPLU 14-62W43771 BPLU 14-60W43771 BPLU 14-62W47185 BPLU 14-56W47185 BPLU 14-58W48762 4-21W48763 SWBD 4-21W48764 SWBD 4-21W48765 SWBD 4-21W49813 SWBD 12-23W49813 SWBD 14-57W49813 SWBD 14-57W49813 SWBD 14-57W49813 SWBD 4-21W49814 SWBD 12-23W49814 SWBD 14-57W49814 SWBD 4-21W49815 SWBD 12-23W49815 SWBD 14-57W49815 SWBD 4-21W49816 SWBD 12-23W49816 SWBD 14-57W49816 SWBD 4-21W49818 SWBD 14-57W49818 SWBD 4-21W49819 SWBD 14-57W49819 SWBD 4-21W49827 SWBD 14-57W49827 SWBD 4-21W49828 SWBD 14-57W49828 SWBD 4-21W49829 SWBD 4-21W49830 SWBD 14-57W49830 SWBD 4-21W49832 SWBD 14-57W49832 SWBD 4-21W53045 HDSS 5-11W53045 HDSS 5-12W53045 HDSS 5-13W53045 HDSS 5-9W55365 SWBD 14-57W55365 SWBD 14-57W55365 SWBD 14-57W55365 SWBD 14-57W55365 SWBD 4-21W55365 SWBD 4-21W55366 SWBD 14-57W55366 SWBD 14-57W55366 SWBD 14-57W55366 SWBD 14-57W55366 SWBD 4-21W55366 SWBD 4-21W55367 SWBD 14-57W55367 SWBD 14-57W55367 SWBD 14-57W55367 SWBD 14-57W55367 SWBD 4-21W55367 SWBD 4-21W55368 SWBD 14-57W55368 SWBD 14-57W55368 SWBD 14-57W55368 SWBD 14-57W55368 SWBD 4-21W55368 SWBD 4-21W56623 SWBD 4-21W56626 SWBD 14-57W56626 SWBD 14-57W56627 HDSS 14-57W56627 HDSS 14-57W56628 SWBD 14-57W56628 SWBD 14-57W56628 SWBD 4-21W56629 SWBD 14-57W56629 SWBD 14-57W56629 SWBD 4-21W60992 HDSS 5-11W60992 HDSS 5-13W60992 HDSS 5-4W60992 HDSS 5-7W60992 HDSS 5-7W60992 HDSS 5-7W60992 HDSS 5-9W60992 HDSS 6-41W60993 HDSS 5-11W60993 HDSS 5-12W60993 HDSS 5-13W60993 HDSS 5-5W60993 HDSS 5-7W60993 HDSS 5-7W60993 HDSS 5-9W60993 HDSS 5-9W60993 HDSS 6-45W62890 BPLU 14-56W62891 BPLU 14-56W63231 BPLU 14-57W63232 BPLU 14-57W63233 BPLU 14-57W63234 BPLU 14-57W63234 BPLU 14-57W63238 BPLU 14-57W63238 BPLU 14-57W63553 BPLU 14-57W63554 BPLU 14-57W63623 HDSS 5-11W63623 HDSS 5-13W63623 HDSS 5-5W63623 HDSS 5-6W63623 HDSS 5-7W63623 HDSS 5-7W63623 HDSS 5-9W63623 HDSS 5-9W63623 HDSS 6-49W63623 HDSS 6-51W63623 HDSS 6-53W63623 HDSS 6-55W63810 BPLU 14-56W68101 BPLU 14-56W68113 BPLU 14-49W73534 BPLU 14-57WB2150B RESI 1-10WB2200B RESI 1-10WB2225 RESI 1-10WB2225 RESI 5-11WB2225 RESI 6-28WB3100 RESI 1-10WB3100 RESI 5-10WB3100 RESI 6-27WB3225 RESI 1-10WB3225 RESI 5-11WB3225 RESI 6-28WBMEFM 6-87WBMFDP 6-136WBMFDP 6-136WBMFFM 6-136WBMFFM 6-136WBMLDP 6-137WBMLDP 6-137WBMLFM 6-137WBMLFM 6-137WBMMDP 6-137WBMMFM 6-137WBMPDP 6-137WBMPDP 6-137WBMPFM 6-137WBMPFM 6-137WF1 BPLU 14-49WF2030 RESI 1-15WF2030GFCI RESI 1-15WF2030PL RESI 1-15WF2060 RESI 1-15WF2060GFCI RESI 1-15WF2060PL RESI 1-15WMC10 RESG 2-41WMC104 RESG 2-41WMC104BF RESG 2-41WMC10BF RESG 2-41WMC12 RESG 2-41WMC124 RESG 2-41WMC124BF RESG 2-41WMC12BF RESG 2-41WMC14 RESG 2-41WMC144 RESG 2-41WMC144BF 2-41WMC14BF RESG 2-41WMC16 RESG 2-41WMC164 RESG 2-41WMC164BF RESG 2-41WMC16BF RESG 2-41WMC4 RESG 2-41WMC44 RESG 2-41WMC44BF RESG 2-41WMC4BF RESG 2-41WMC6 RESG 2-41WMC64 RESG 2-41WMC64BF RESG 2-41WMC6BF RESG 2-41WMC7 RESG 2-41WMC74 RESG 2-41WMC74BF 2-41WMC7BF RESG 2-41WMC8 RESG 2-41WMC84 RESG 2-41WMC84BF RESG 2-41WMC8BF RESG 2-41WMEP RESG 2-81WMEX1U RESG 2-81WMEX4U RESG 2-81WMM2200U RESG 2-44WMM2200UR RESG 2-45WMM22URNJ RESI 2-45WMM24AB200U RESG 2-44WMM24AB2URNJ RESI 2-45WMM2U RESG 2-44WMM2UR RESG 2-45WMM2URNJ RESG 2-45WMM3200U RESG 2-44WMM3200UR RESG 2-45WMM32URNJ RESG 2-45WMM34200U RESG 2-44WMM34200UR RESG 2-45WMM342URNJ RESG 2-45WMM34U RESG 2-44WMM34UR RESG 2-45WMM34URNJ RESG 2-45WMM3U RESG 2-44WMM3UR RESG 2-45WMM3URNJ RESG 2-45WMM4200U RESG 2-44WMM4200UR RESG 2-45WMM42URNJ RESG 2-45WMM44AB200U RESG 2-44WMM44AB200UR RESG 2-45WMM44AB2URNJ RESG 2-45WMM44ABU RESG 2-44WMM44ABUR RESG 2-45WMM44ABURNJ RESG 2-45WMM44BC200U RESG 2-44WMM44BC200UR RESG 2-45WMM44BC2URNJ RESG 2-45WMM44BCU RESG 2-44WMM44BCUR RESG 2-45WMM44BCURNJ RESG 2-45WMM44CA200U RESG 2-44WMM44CA200UR RESG 2-45WMM44CA2URNJ RESG 2-45WMM44CAU RESG 2-44WMM44CAUR RESG 2-45WMM44CAURNJ RESG 2-45WMM4U RESG 2-44WMM4UR RESG 2-45WMM4URNJ RESG 2-45WMM54AB200U RESG 2-44WMM54AB2URNJ RESG 2-45WMM54ABU RESG 2-44WMM54ABUR RESG 2-45WMM54ABURNJ RESG 2-45WMM54BC200U RESG 2-44WMM54BC2URNJ RESG 2-45WMM54BCUR RESG 2-45WMM54BCURNJ RESG 2-45WMM54CA200U RESG 2-44WMM54CA2URNJ RESG 2-45WMM54CAUR RESG 2-45WMM54CAURNJ RESG 2-45WMM5U RESG 2-44WMM5UR RESG 2-45WMM5URNJ RESG 2-45WMM64U RESG 2-44WMM64UR RESG 2-45WMM64URNJ RESG 2-45WMM6U RESG 2-44WMM6UR RESG 2-45WMM6URNJ RESG 2-45WMMB11200 RESG 2-43WMMB1400 RESG 2-43WMMB1800 RESG 2-43WMMB31200 RESG 2-43WMMB3400 RESG 2-43WMMB3800 RESG 2-43WMMBK RESG 2-81WMP024U RESG 2-42WMP02U RESG 2-42WMS124U RESG 2-42WMS12U RESG 2-42WMS44U RESG 2-42WMS44UPBU RESG 2-42WMS4U RESG 2-42WMS4UPBU RESG 2-42WMS64U RESG 2-42WMS64UPBU RESG 2-42WMS6U RESG 2-42WMS6UPBU RESG 2-42WMS84U RESG 2-42WMS84UPBU RESG 2-42WMS8U RESG 2-42WMS8UPBU RESG 2-42WMTB124U RESG 2-43WMTB12U RESG 2-43WMTB164U RESG 2-43WMTB16U RESG 2-43WMTB84U RESG 2-43WMTB8U RESG 2-43WN2060 RESI 1-15WN2060GFCI RESI 1-15WN2060PL RESI 1-15WN2060PLX RESI 1-15WNAS2060 RESI 1-15WNAS2060GFCI RESI 1-15WNAS2060PL 1-15WP32 UNPB 10-10WP32 UNPB 10-10WP32 UNPB 10-10WP32 UNPB 10-10WP32 UNPB 10-10WP32 UNPB 10-10WP38 UNPB 10-10WP38 UNPB 10-10WP38 UNPB 10-10WP38 UNPB 10-10WP38 UNPB 10-10WP38 UNPB 10-10WP44 UNPB 10-10WP44 UNPB 10-10WP44 UNPB 10-10WP44 UNPB 10-10WP44 UNPB 10-10WP44 UNPB 10-10WP56 UNPB 10-10WP56 UNPB 10-10WP56 UNPB 10-10WP56 UNPB 10-10WP56 UNPB 10-10WP56 UNPB 10-10WP62 UNPB 10-10WP62 UNPB 10-10WP62 UNPB 10-10WP62 UNPB 10-10WP62 UNPB 10-10WP62 UNPB 10-10WP68 UNPB 10-10WP68 UNPB 10-10WP68 UNPB 10-10WP68 UNPB 10-10WP68 UNPB 10-10WP68 UNPB 10-10WPB224 SWBD 12-20WPB226 SWBD 12-20WPB228 SWBD 12-20WPB424 SWBD 12-20WPB426 SWBD 12-20WPB428 SWBD 12-20WPB444 SWBD 12-20WPB446 SWBD 12-20WPB448 SWBD 12-20WPF224 SWBD 12-21WPF226 SWBD 12-2119 PRODUCTINDEXSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 19-25

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory Page19PRODUCTINDEXWPF424 SWBD 12-21WPF426 SWBD 12-21WPF444 SWBD 12-21WPF446 SWBD 12-21WPUG14 SWBD 12-23WPUG26 SWBD 12-23WSC150C RESG 2-6WSC250C RESG 2-6WSC350C RESG 2-6WSN251CR RESG 2-6WSN351CR RESG 2-6WSN451CR RESG 2-6WSX019 2-10X103PB BUSW 14-49X103PBG BUSW 14-49X103PBGIG 14-49X103PBIG BUSW 14-49X104PB BUSW 14-49X104PBG BUSW 14-49X104PBGIG BUSW 14-49X104PBIG BUSW 14-49X2003 BUSW 14-48X20032 BUSW 14-48X20032G BUSW 14-48X20032GIG BUSW 14-48X20032IG BUSW 14-48X20035 BUSW 14-48X20035G BUSW 14-48X20035GIG BUSW 14-48X20035IG BUSW 14-48X2003ETVB 14-49X2003ETVBG 14-49X2003ETVBGIG 14-49X2003ETVBIG 14-49X2003FE BUSW 14-48X2003FEG BUSW 14-48X2003FEGIG BUSW 14-48X2003FEIG BUSW 14-48X2003G BUSW 14-48X2003GIG BUSW 14-48X2003IG BUSW 14-48X2003L 14-49X2003LG 14-49X2003LGIG 14-49X2003LIG 14-49X2003M BUSW 14-49X2003MG BUSW 14-49X2003MGIG BUSW 14-49X2003MIG BUSW 14-49X2003PB 14-49X2003PBG BUSW 14-49X2004 BUSW 14-48X20042 BUSW 14-48X20042G BUSW 14-48X20042GIG BUSW 14-48X20042IG BUSW 14-48X20045 BUSW 14-48X20045G BUSW 14-48X20045GIG BUSW 14-48X20045IG BUSW 14-48X2004ETVB 14-49X2004ETVBG 14-49X2004ETVBGIG 14-49X2004ETVBIG 14-49X2004FE BUSW 14-48X2004FEG BUSW 14-48X2004FEGIG BUSW 14-48X2004FEIG BUSW 14-48X2004G BUSW 14-48X2004GIG BUSW 14-48X2004IG BUSW 14-48X2004L 14-49X2004LG 14-49X2004LGIG 14-49X2004LIG 14-49X2004M BUSW 14-49X2004MG BUSW 14-49X2004MGIG BUSW 14-49X2004MIG BUSW 14-49X2004PB BUSW 14-49X2004PBG BUSW 14-49X4003 14-48X40032 14-48X40032G 14-48X40032GIG 14-48X40032IG 14-48X40035 14-48X40035G 14-48X40035GIG 14-48X40035IG 14-48X4003ETVB 14-49X4003ETVBG 14-49X4003ETVBGIG 14-49X4003ETVBIG 14-49X4003FE 14-48X4003FEG 14-48X4003FEGIG 14-48X4003FEIG 14-48X4003G 14-48X4003GIG 14-48X4003IG 14-48X4003L 14-49X4003LG 14-49X4003LGIG 14-49X4003LIG 14-49X4003M 14-49X4003MG 14-49X4003MGIG 14-49X4003MIG 14-49X4004 14-48X40042 14-48X40042G 14-48X40042GIG 14-48X40042IG 14-48X40045 14-48X40045G 14-48X40045GIG 14-48X40045IG 14-48X4004ETVB 14-49X4004ETVBG 14-49X4004ETVBGIG 14-49X4004ETVBIG 14-49X4004FE 14-48X4004FEG 14-48X4004FEGIG 14-48X4004FEIG 14-48X4004G 14-48X4004GIG 14-48X4004IG 14-48X4004L 14-49X4004LG 14-49X4004LGIG 14-49X4004LIG 14-49X4004M 14-49X4004MG 14-49X4004MGIG 14-49X4004MIG 14-49XC1003 BUSW 14-48XC10032 BUSW 14-48XC10032G BUSW 14-48XC10032GIG BUSW 14-48XC10032IG BUSW 14-48XC10035 BUSW 14-48XC10035G BUSW 14-48XC10035GIG BUSW 14-48XC10035IG BUSW 14-48XC1003ETVB 14-49XC1003ETVBG 14-49XC1003ETVBGIG 14-49XC1003ETVBIG 14-49XC1003FE BUSW 14-48XC1003FEG BUSW 14-48XC1003FEGIG BUSW 14-48XC1003FEIG BUSW 14-48XC1003G BUSW 14-48XC1003GIG BUSW 14-48XC1003IG BUSW 14-48XC1003L 14-49XC1003LG 14-49XC1003LGIG 14-49XC1003LIG 14-49XC1004 BUSW 14-48XC10042 BUSW 14-48XC10042G BUSW 14-48XC10042GIG BUSW 14-48XC10042IG BUSW 14-48XC10045 BUSW 14-48XC10045G BUSW 14-48XC10045GIG BUSW 14-48XC10045IG BUSW 14-48XC1004ETVB 14-49XC1004ETVBG 14-49XC1004ETVBGIG 14-49XC1004ETVBIG 14-49XC1004FE BUSW 14-48XC1004FEG BUSW 14-48XC1004FEGIG BUSW 14-48XC1004FEIG BUSW 14-48XC1004G BUSW 14-48XC1004GIG BUSW 14-48XC1004IG BUSW 14-48XC1004L 14-49XC1004LG 14-49XC1004LGIG 14-49XC1004LIG 14-49XE100 BUSW 14-49XE100 BUSW 14-49XE100 BUSW 14-49XE100 BUSW 14-49XE100 BUSW 14-49XE100 BUSW 14-49XE100 BUSW 14-49XE100 BUSW 14-49XE200 BUSW 14-49XE200 BUSW 14-49XE200 BUSW 14-49XE200 BUSW 14-49XE200 BUSW 14-49XE200 BUSW 14-49XE200 BUSW 14-49XE200 BUSW 14-49XE400 14-49XE400 14-49XE400 14-49XE400 14-49XE400 14-49XE400 14-49XE400 14-49XE400 14-49XEC3100 BPLU 14-56XEC3100IG BPLU 14-56XEC4100 BPLU 14-56XEC4100IG BPLU 14-56XEQH BPLU 14-56XH2 BUSW 14-48XLEC3100 BPLU 14-56XLEC4100 BPLU 14-56XLVB321 BPLU 14-56XLVB322 BPLU 14-56XLVB323 BPLU 14-56XLVB351 BPLU 14-56XLVB352 BPLU 14-56XLVB353 BPLU 14-56XLVB421N BPLU 14-56XLVB422N BPLU 14-56XLVB423N BPLU 14-56XLVB451N BPLU 14-56XLVB452N BPLU 14-56XLVB453N BPLU 14-56XOC BPLU 14-48XQ35 BPLU 14-56XQ35R BPLU 14-56XQ45 BPLU 14-56XQ45R BPLU 14-56XQBRKCVR 14-5611 NEMA 16-1014 NEMA 16-1414 NEMA 16-1514 NEMA 16-1617 NEMA 16-1717 NEMA 16-1817 NEMA 16-1917 NEMA 16-2017 NEMA 16-2117 NEMA 16-2217 NEMA 16-2318 NEMA 16-2418 NEMA 16-2518 NEMA 16-2622 NEMA 16-2722 NEMA 16-2825 NEMA 16-2926 NEMA 16-3030 NEMA 16-3230 NEMA 16-3330 NEMA 16-3430 NEMA 16-3532 NEMA 16-3632 NEMA 16-3732 NEMA 16-3832 NEMA 16-3932 NEMA 16-4032 NEMA 16-4132 NEMA 16-4232 NEMA 16-4336 NEMA 16-6436 NEMA 16-6536 NEMA 16-6636 NEMA 16-6737 NEMA 16-6437 NEMA 16-6537 NEMA 16-6637 NEMA 16-6740 NEMA 16-4440 NEMA 16-4542 16-16042 NEMA 16-16143 NEMA 16-4645 16-16045 NEMA 16-16148 16-15748 NEMA 16-4849 16-15649 16-15749 16-15849 NEMA 16-8149 NEMA 16-8249 NEMA 16-8349 NEMA 16-8449 NEMA 16-8549 NEMA 16-8649 NEMA 16-8749 NEMA 16-8849 IEC 16-8049 NEMA 16-9049 NEMA 16-9149 NEMA 16-9249 NEMA 16-9375 16-15675 16-15775 NEMA 16-8675 NEMA 16-8783 NEMA 16-5283 NEMA 16-5383 NEMA 16-5483 NEMA 16-5584 NEMA 16-5284 NEMA 16-5384 NEMA 16-5484 NEMA 16-5587 NEMA 16-5887 NEMA 16-5987 NEMA 16-6288 NEMA 16-6088 NEMA 16-6197 NEMA 16-4997 NEMA 16-5097 NEMA 16-51958 NEMA 16-49050BB1224Q XFMR 7-19050BB1632Q 7-19050BB2448Q XFMR 7-19100BB1224Q XFMR 7-19100BB1632Q XFMR 7-19100BB2448Q 7-19105BB1224Q XFMR 7-19105BB1632Q XFMR 7-19105BB2448Q XFMR 7-1911-1056-01 10-1111-1824-01 UNPB 10-1112-1110-01 10-1112CLN500 6-11612CLN500 6-135150BB1224Q XFMR 7-19150BB1632Q 7-19150BB2448Q 7-191B1N001 7-61B1N002 7-61B1N003 7-61B1N005 7-61B1N007 7-61B1N010 7-61B1N015 7-61B1Y025TP1 7-61B1Y037TP1 7-61B1Y050TP1 7-61B1Y075TP1 7-61B1Y100TP1 7-61B1Y167TP1 7-61BB1224Q XFMR 7-191BB1632Q XFMR 7-191BB2448Q XFMR 7-191D1N001 7-61D1N001QST XFMR 7-181D1N002 7-61D1N002QST XFMR 7-181D1N003 7-61D1N003QST XFMR 7-181D1N005 7-61D1N005QST XFMR 7-181D1N007 7-61D1N007QST XFMR 7-181D1N010 7-61D1N010QST XFMR 7-181D1N015 7-61D1N015QST XFMR 7-181D1N105 7-61D1N105QST XFMR 7-181D1N110QST 7-181D1N115QST XFMR 7-181D1N205 7-61D1N205QST XFMR 7-181D1N505 7-61D1N505QST XFMR 7-181D1N555QST XFMR 7-181D1N705 7-61D1N705QST XFMR 7-181D1N775QST 7-181D1Y015TP1 7-61D1Y025TP1 7-61D1Y025TP1QST 7-181D1Y037TP1 7-61D1Y037TP1QST 7-181D1Y050TP1 7-61D1Y050TP1QST 7-181D1Y075TP1 7-61D1Y075TP1QST 7-181D1Y100TP1 7-61D1Y100TP1QST 7-181D1Y167TP1 7-61D1Y167TP1QST 7-181E1U003 7-61E1U005 7-61E1U007 7-61E1U010 7-61E1U015 7-61E1U025 7-61F1R003 7-61F1R005 7-61F1R007 7-61F1R010 7-61F1R015 7-61F1R025 7-61G1R003 7-71G1R005 7-71G1R007 7-71G1R010 7-71G1R015 7-71G1R025 7-71G1Y025TP1 7-71G1Y037TP1 7-71G1Y050TP1 7-71G1Y075TP1 7-71G1Y100TP1 7-71G1Y167TP1 7-71H1N001 7-71H1N002 7-71H1N003 7-71H1N005 7-71H1N007 7-71H1N010 7-71H1N015 7-71H1N025 7-71H1N037 7-71H1N050 7-71H1N075 7-71H1N100 7-71H8N001 7-71H8N002 7-71H8N003 7-71H8N005 7-71H8N007 7-71LPC005 7-131LPC007 7-131LPC010 7-131LPC015 7-131LPC025 7-131X1N001 7-71X1N002 7-71X1N003 7-71X1N005 7-71X1N007 7-71X1N010 7-71X1N015 7-71X1N025 7-7205BB1224Q XFMR 7-19205BB1632Q XFMR 7-19205BB2448Q 7-1920STD1000 6-6424CLP600 6-13519-26Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory Page2BB1224Q XFMR 7-192BB1632Q XFMR 7-192BB2448Q 7-192CLD20 6-1342CLD20 6-962CLF350 6-1002CLF350 6-1342NLK1 UNPB 10-122NLK18 UNPB 10-112NLK2 UNPB 10-122NLK30 UNPB 10-112NLK42 UNPB 10-112TA2LG600LD MCCB 6-1352TA2LG600LN MCCB 6-1352TA2N8750 MCCB 6-512TA2N8750 MCCB 6-552TA2N8750 MCCB 6-832TA3N8750 MCCB 6-512TA3N8750 MCCB 6-552TA3N8750 MCCB 6-832TA3NG750 MCCB 6-1352TA4N8500 MCCB 6-512TA4N8500 MCCB 6-552TA4N8500 MCCB 6-822TA4NG500 6-1352TA4P8500 MCCB 6-512TA4P8500 MCCB 6-552TA4P8500 MCCB 6-822TC2LG600LD 6-1352TC2LG600LN 6-1353B1Y015TP1 7-103B1Y030TP1 7-103B1Y045TP1 7-103B1Y075TP1 7-103B1Y112TP1 7-103B1Y150TP1 7-103B1Y225TP1 7-103B3R003 7-103B3R006 7-103B3R009 7-103B3R015 7-103B3S225TP1 7-103B3S300TP1 7-103B3S500TP1 7-103B3Y015TP1 7-103B3Y015XESTP1 7-123B3Y030TP1 7-103B3Y030XESTP1 7-123B3Y045TP1 7-103B3Y045XESTP1 7-123B3Y075TP1 7-103B3Y075XESTP1 7-123B3Y112TP1 7-103B3Y112XESTP1 7-123B3Y150TP1 7-103B5R009 7-103B5R015 7-103B5R030TP1 7-103B5R045TP1 7-103B5R075TP1 7-103B5R112TP1 7-103B5R150TP1 7-103B5S225TP1 7-103B5S300TP1 7-103B5S500TP1 7-103BB1224Q XFMR 7-193BB1632Q XFMR 7-193BB2448Q XFMR 7-193C3S225TP1 7-103C3S300TP1 7-103C3S500TP1 7-103C3Y015TP1 7-103C3Y015XESTP1 7-123C3Y030TP1 7-103C3Y030XESTP1 7-123C3Y045TP1 7-103C3Y045XESTP1 7-123C3Y075TP1 7-103C3Y075XESTP1 7-123C3Y112TP1 7-103C3Y112XESTP1 7-123C3Y150TP1 7-103C5S225TP1 7-103C5S300TP1 7-103C5S500TP1 7-103C5Y015TP1 7-103C5Y030TP1 7-103C5Y045TP1 7-103C5Y075TP1 7-103C5Y112TP1 7-103C5Y150TP1 7-103CLD20 6-1343CLD20 6-963CLF350 6-1003CLF350 6-1343CLJ350 6-1043CLJ350 6-1353CLJ600 6-1043CLJ600 6-1353CLJ750 6-1043CLJ750 6-1353CLL750 6-1083CLL750 6-1353F1Y015TE 7-83F1Y015TP1 7-83F1Y015TP1QST 7-183F1Y030TE 7-83F1Y030TP1 7-83F1Y030TP1QST 7-183F1Y045TE 7-83F1Y045TP1 7-83F1Y045TP1QST 7-183F1Y075TE 7-83F1Y075TP1 7-83F1Y075TP1QST 7-183F1Y112TE 7-83F1Y112TP1 7-83F1Y112TP1QST 7-183F1Y150TE 7-83F1Y150TP1 7-83F1Y150TP1QST 7-183F1Y225TP1 7-83F1Y300TP1 7-83F1Y500TP1 7-83F1Y750TP1 7-83F2R003 7-83F2R006 7-83F2R009 7-83F2R015 7-83F3R003 7-83F3R003QST XFMR 7-183F3R006 7-83F3R006QST XFMR 7-183F3R009 7-83F3R009QST XFMR 7-183F3R015 7-83F3S000TP1 7-83F3Y015K13TP1 7-93F3Y015K20TP1 7-93F3Y015K30TP1 7-93F3Y015K4TP1 7-93F3Y015TE 7-83F3Y015TP1 7-83F3Y015TP1QST 7-183F3Y015XESTP1 7-123F3Y030K13TP1 7-93F3Y030K20TP1 7-93F3Y030K30TP1 7-93F3Y030K4TP1 7-93F3Y030TE 7-83F3Y030TP1 7-83F3Y030TP1QST 7-183F3Y030XESTP1 7-123F3Y045K13TP1 7-93F3Y045K20TP1 7-93F3Y045K30TP1 7-93F3Y045K4TP1 7-93F3Y045TE 7-83F3Y045TP1 7-83F3Y045TP1QST 7-183F3Y045XESTP1 7-123F3Y075K13TP1 7-93F3Y075K20TP1 7-93F3Y075K30TP1 7-93F3Y075K4TP1 7-93F3Y075TE 7-83F3Y075TP1 7-83F3Y075TP1QST 7-183F3Y075XESTP1 7-123F3Y112K13TP1 7-93F3Y112K20TP1 7-93F3Y112K30TP1 7-93F3Y112K4TP1 7-93F3Y112TE 7-83F3Y112TP1 7-83F3Y112TP1QST 7-183F3Y112XESTP1 7-123F3Y150K13TP1 7-93F3Y150K20TP1 7-93F3Y150K30TP1 7-93F3Y150K4TP1 7-93F3Y150TE 7-83F3Y150TP1 7-83F3Y150TP1QST 7-183F3Y225K13TP1 7-93F3Y225K20TP1 7-93F3Y225K30TP1 7-93F3Y225K4TP1 7-93F3Y225RTP1QST 7-183F3Y225TP1 7-83F3Y300K13TP1 7-93F3Y300K20TP1 7-93F3Y300K30TP1 7-93F3Y300K4TP1 7-93F3Y300RTP1QST 7-183F3Y300TP1 7-83F3Y500K13TP1 7-93F3Y500K20TP1 7-93F3Y500K30TP1 7-93F3Y500K4TP1 7-93F3Y500RTP1QST 7-183F3Y500TP1 7-83F3Y750TP1 7-83F5R015 7-93F5Y015TP1 7-93F5Y030TP1 7-93F5Y045TP1 7-93F5Y075TP1 7-93F5Y112TP1 7-93F5Y150TP1 7-93F5Y225TP1 7-93F5Y300TP1 7-93F5Y500TP1 7-93G3R003 7-113G3R006 7-113G3R009 7-113G3R015 7-113G3Y015TP1 7-113G3Y030TP1 7-113G3Y045TP1 7-113G3Y075TP1 7-113G3Y112TP1 7-113G3Y150TP1 7-113G3Y225TP1 7-113G3Y300TP1 7-113G3Y500TP1 7-113G4R015A 7-113G4R030A 7-113G4R045A 7-113G4R075A 7-113G4R112A 7-113G4R150A 7-113G4R225A 7-113G4R300A 7-113G4R500A 7-113G5R003 7-113G5R006 7-113G5R009 7-113G5R015 7-113G5Y015TP1 7-113G5Y030TP1 7-113G5Y045TP1 7-113G5Y075TP1 7-113G5Y112TP1 7-113G5Y150TP1 7-113G5Y225TP1 7-113G5Y300TP1 7-113G5Y500TP1 7-113LD2064-0TB51-0US1 HDSS 3-323LD2064-0TB53-0US1 HDSS 3-323LD2064-1GP51-0US1 HDSS 3-323LD2064-1GP53-0US1 HDSS 3-323LD2103-0TK__ 4-23LD2103-1TL__ 4-23LD2103-1TP__ 4-23LD2103-2EP__ 4-23LD2113-0TK__ 4-33LD2113-1TL__ 4-33LD2144-0TK__ 4-33LD2144-1TL__ 4-33LD2154-0TK__ 4-23LD2154-1TL__ 4-23LD2154-1TP__ 4-23LD2154-2EP__ 4-23LD2164-0TB51-0US1 HDSS 3-323LD2164-0TB53-0US1 HDSS 3-323LD2164-1GP51-0US1 HDSS 3-323LD2164-1GP53-0US1 HDSS 3-323LD2203-0TK__ 4-23LD2203-1TL__ 4-23LD2213-0TK__ 4-33LD2213-1TL53 4-33LD2244-0TK__ 4-33LD2244-1TL53 4-33LD2254-0TK__ 4-23LD2254-1TL__ 4-23LD2264-0TB51-0US1 HDSS 3-323LD2264-0TB53-0US1 HDSS 3-323LD2264-1GP51-0US1 HDSS 3-323LD2264-1GP53-0US1 HDSS 3-323LD2264-1TS51-0US1 HDSS 3-323LD2264-1TS53-0US1 HDSS 3-323LD2264-2TW51-0US1 HDSS 3-323LD2264-2TW53-0US1 HDSS 3-323LD2504-0TK__ 4-23LD2504-3VK53 4-23LD2514-0TK__ 4-33LD2545-0TK__ 4-33LD2555-0TK__ 4-23LD2565-0TB51-0US1 HDSS 3-323LD2565-0TB53-0US1 HDSS 3-323LD2565-1GP51-0US1 HDSS 3-323LD2565-1GP53-0US1 HDSS 3-323LD2704-0TK__ 4-23LD2714-0TK__ 4-33LD2766-0TB51-0US1 HDSS 3-323LD2766-0TB53-0US1 HDSS 3-323LD2766-1GP51-0US1 HDSS 3-323LD2766-1GP53-0US1 HDSS 3-323LD2804-0TK__ 4-23LD2814-0TK__ 4-33LD2866-0TB51-0US1 HDSS 3-323LD2866-0TB53-0US1 HDSS 3-323LD2866-1GP51-0US1 HDSS 3-323LD2866-1GP53-0US1 HDSS 3-323LD9200-5B 4-33LD9200-5BF 4-33LD9200-5C 4-33LD9200-5CF 4-33LD9220-0B 4-33LD9220-0C 4-33LD9220-2B 4-33LD9220-2C 3-333LD9220-2C 4-33LD9221-0A 4-33LD9221-0A 4-33LD9221-2A 4-33LD9221-2A 4-33LD9224-1B 4-33LD9224-1B 4-33LD9224-1D 4-33LD9224-1D 4-33LD9224-3B 4-33LD9224-3B 4-33LD9224-3D 4-33LD9224-3D 4-33LD9250-0BA 4-33LD9250-0CA 4-33LD9250-2BA 4-33LD9250-2CA 3-333LD9250-2CA 4-33LD9251-0A 4-33LD9251-0A 4-33LD9251-2A 4-33LD9251-2A 4-33LD9280-0B 4-33LD9280-0C 4-33LD9280-2B 4-33LD9280-2C 3-333LD9280-2C 4-33LD9281-2A 4-33LD9281-2A 4-33LD9284-1B 4-33LD9284-1B 4-33LD9284-1D 4-33LD9284-1D 4-33LD9284-3B 4-33LD9284-3B 4-33LD9284-3D 4-33LD9284-3D 4-33LPC009 7-133LPC015 7-133LPC022 7-133LPC030 7-133NW7 NEMA 16-89“3RA19 6, 7” NEMA 16-863RB20 NEMA 16-483RB29 8 NEMA 16-883RH19 21 NEMA 16-883RP20 NEMA 16-883RT19 5 NEMA 16-863RT19 6 16-1553RT19 6 16-1563RT19 6 NEMA 16-883RT19 7 16-1553RT19 7 NEMA 16-883RU19 0 NEMA 16-88“3RV10, 13” NEMA 16-103RV19 IEC 16-803RW30/31 NEMA 16-1643RW40 IEC 16-1653RW44 IEC 16-1663RW44 IEC 16-1673TA12JG04 6-1043TA12JG04 6-1353TA1DG30 MCCB 6-1343TA1DG30 MCCB 6-963TA1EG10 MCCB 6-243TA1EG10 MCCB 6-323TA1EG10 MCCB 6-813TA1EG30 MCCB 6-243TA1EG30 MCCB 6-323TA1EG30 MCCB 6-813TA1JG750 MCCB 6-1043TA1JG750 MCCB 6-1043TA1JG750 MCCB 6-1353TA1JG750 MCCB 6-1353TA2JG250 MCCB 6-1043TA2JG250 MCCB 6-1353TA2LG600LD MCCB 6-1083TA2LG600LD MCCB 6-1353TA2LG600LN MCCB 6-1083TA2LG600LN MCCB 6-1353TA2MG750 MCCB 6-1123TA2MG750 MCCB 6-1353TA2N8750 MCCB 6-513TA2N8750 MCCB 6-533TA2N8750 MCCB 6-553TA2N8750 MCCB 6-833TA3DG02 6-1343TA3DG02 6-963TA3EG02 6-833TA3FG20 6-1003TA3FG20 6-1343TA3MG500 MCCB 6-1123TA3MG500 MCCB 6-1353TA3MG600 6-1123TA3MG600 6-1353TA3N8750 MCCB 6-513TA3N8750 MCCB 6-533TA3N8750 MCCB 6-553TA3N8750 MCCB 6-833TA3NG750 MCCB 6-1163TA3NG750 MCCB 6-1353TA4N8500 MCCB 6-513TA4N8500 MCCB 6-533TA4N8500 MCCB 6-553TA4N8500 MCCB 6-823TA4NG500 MCCB 6-1163TA4NG500 MCCB 6-1353TA4NG500H 6-1163TA4NG500H 6-1353TA4P8500 MCCB 6-513TA4P8500 MCCB 6-533TA4P8500 MCCB 6-553TA4P8500 MCCB 6-823TA6DG04 6-1343TA6DG04 6-963TA6EG06 6-833TA6FG04 6-1003TA6FG04 6-1343TA6JG20 6-1043TA6JG20 6-1353TA6PG750 6-1203TA6PG750 6-1353TAW1FG350 MCCB 6-1003TAW1FG350 MCCB 6-1343TC1DG30 6-1343TC1DG30 6-963TC1GG20 MCCB 6-223TC1GG20 MCCB 6-303TC1GG20 MCCB 6-813TC1Q1 MCCB 6-223TC1Q1 MCCB 6-303TC1Q1 MCCB 6-813TC2LG600LD 6-1083TC2LG600LD 6-1353TC2LG600LN 6-1083TC2LG600LN 6-1353TC4NG500 6-11619 PRODUCTINDEXSiemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog 19-27

Product IndexCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalog ProductNumber Category PageCatalogNumberProductCategory Page19PRODUCTINDEX3TC4NG500 6-1353TC6PG750 6-1203TC6PG750 6-1353TCW1FG350 6-1003TCW1FG350 6-1343TW1DG20 MCCB 6-1343TW1DG20 MCCB 6-963TW1EG30 MCCB 6-323TW1EG30 MCCB 6-813TW1FG350 6-1003TW1FG350 6-1343TW1JG600 6-1043TW1JG600 6-13542NLK18 UNPB 10-1142NLK30 UNPB 10-1142NLK42 UNPB 10-114MLKA1 UNPB 10-114MLKA3 UNPB 10-114MLKC1 UNPB 10-114MLKC3 UNPB 10-11505BB1224Q XFMR 7-19505BB1632Q XFMR 7-19505BB2448Q XFMR 7-1950A PILO 16-18150B PILO 16-18150C PILO 16-18150C PILO 16-18250D PILO 16-18150D PILO 16-18250D PILO 16-18350D PILO 16-18750E PILO 16-18250E PILO 16-18350F PILO 16-18450G PILO 16-18450H PILO 16-18450H PILO 16-18650J PILO 16-18550L PILO 16-18550M PILO 16-18450M PILO 16-18550N PILO 16-18550R PILO 16-18250R PILO 16-18350Z PILO 16-18752AA PILO 16-21252AA PILO 16-21352AB PILO 16-21252ABT PILO 16-20052ABW PILO 16-20052AE PILO 16-21352AL PILO 16-21252AX PILO 16-21252BA PILO 16-21352BJ PILO 16-21352C1 PILO 16-21652C2 PILO 16-21652C3 PILO 16-21752MA PILO 16-21252MA2 PILO 16-20052MA3 PILO 16-20052MA4 PILO 16-20052NA PILO 16-21952ND PILO 16-21952NE PILO 16-21952NL PILO 16-21952NP02 PILO 16-20052PA2 PILO 16-19152PA2 PILO 16-19652PA3 PILO 16-19152PA3 PILO 16-19252PA4 PILO 16-19452PA6 PILO 16-19552PA8 PILO 16-19052PA8 PILO 16-19652PB9 PILO 16-19052PB9 PILO 16-19652PC4 PILO 16-19452PE3 PILO 16-19152PE4 PILO 16-19152PE4 PILO 16-19452PE6 PILO 16-19552PX2 PILO 16-20252PX2 PILO 16-20752PX3 PILO 16-20252PX3 PILO 16-20352PX4 PILO 16-20552PX6 PILO 16-20652PX8 PILO 16-20152PX8 PILO 16-20752PX9 PILO 16-20152PX9 PILO 16-20752RA1 PILO 16-21152RA2 PILO 16-21252RA4 PILO 16-21152RA5 PILO 16-21152RA6 PILO 16-21252RA7 PILO 16-21252RB3 PILO 16-21152SA2 PILO 16-19352SA2 PILO 16-19752SA3 PILO 16-19852SA4 PILO 16-19852SA7 PILO 16-19752SB2 PILO 16-19352SB2 PILO 16-19752SC6 PILO 16-19352SC6 PILO 16-19952SW2 PILO 16-20452SW2 PILO 16-20852SX2 PILO 16-20452SX2 PILO 16-2085BB1224Q XFMR 7-195BB1632Q XFMR 7-195BB2448Q 7-1964690-1 RESG 2-106CLE2 SWBD 12-266CLF1 SWBD 12-266CLJ1 SWBD 12-266CLL1 SWBD 12-266CLL350 6-1086CLL350 6-1356CLL600 6-1086CLL600 6-1356E62 SWBD 12-266F62 SWBD 12-266FPB01 SWBD 10-506FPB01 SWBD 10-616FPB01 SWBD 12-266FPB02 SWBD 10-506FPB02 SWBD 10-616FPB02 SWBD 12-266FPB03 SWBD 10-506FPB03 SWBD 10-616FPB03 SWBD 12-266FPB05 SWBD 10-506FPB05 SWBD 10-616FPB05 SWBD 12-266FPB10 SWBD 10-506FPB10 SWBD 10-616FPB10 SWBD 12-266JJ61 SWBD 12-266JJ62 SWBD 12-266LL61 SWBD 12-266QJ2 SWBD 12-266SCJ1 SWBD 12-266SCL1 SWBD 12-266SJL1 SWBD 12-266SLL1 SWBD 12-26705BB1224Q XFMR 7-19705BB1632Q XFMR 7-19705BB2448Q XFMR 7-1973 IEC 16-16873 IEC 16-16973 IEC 16-17074 IEC 16-17274 IEC 16-17374 IEC 16-17474 IEC 16-17574 IEC 16-1768WA10 1 NEMA 16-898WA18 1 NEMA 16-899CLM500 6-1129CLM500 6-13519-28Siemens Power Distribution & Control, SPEEDFAX 2007-2008 Product Catalog

Space getting smaller?Siemens switchboards give you room to breathe.2007 Siemens Energy & Automation, Inc.integratedThe Siemens integrated power systems switchboard provides a smaller,modular, reliable solution to meet the demanding space needs of theelectrical room.Components such as power monitoring, lighting panels, transformers,and lighting control are all incorporated into one piece of equipment.One product, one supplier, and one invoice – it just makes sense.Ask your sales representative about using i-3 Control Technology TM inyour IPS switchboard design.sFor more information or to contact a sales representative, call,e-mail, or visit our web site.Siemens Energy & Automation, Inc. 1-800-964-4114 info.sea@siemens.com www.sea.siemens.com

Siemens Energy & Automation, Inc.3333 Old Milton ParkwayAlpharetta, GA 300051-800-964-4114info.sea@siemens.comwww.sea.siemens.com2007 Siemens Energy & Automation, Inc. All Rights Reserved.Siemens is a registered trademark of Siemens AG. Product names mentioned may be trademarks or registered trademarks of their respectivecompanies. Specifications are subject to change without notice.PDPC-01000-0607 (Supersedes PDPC-01000-0305) 150M0607RDD Printed in USA

power distribution - Siemens

Create successful ePaper yourself

Delete template?

Save as template?