11.01.2013 Views

CD Receiver K 1 - T+A Elektroakustik

CD Receiver K 1 - T+A Elektroakustik

CD Receiver K 1 - T+A Elektroakustik

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>CD</strong> <strong>Receiver</strong> K 1<br />

The unit contains a generously featured pre-amplifier, 4 output stages, one of the world’s<br />

finest analogue tuners and a <strong>CD</strong> player of the latest generation. The pre-amplifier offers a<br />

wide range of sockets and operational facilities ranging from the tape deck with background<br />

control, via the ACE module, a timer module with alarm function, to an additional pre-<br />

amplifier AUX input. The sensitivity of this input is variable, allowing you to balance out<br />

differences in volume between different source devices. A digital volume control system is<br />

fitted, offering a range of 63 discrete increments. The volume of the loudspeaker pairs A and<br />

B can be controlled either together or independently, which is a highly practical feature<br />

where the second pair are located in an adjacent room. The unit also features a separate<br />

output for an active sub-woofer.<br />

Connection elements<br />

Specifications:<br />

Amplifier section<br />

Lutput power<br />

Tuner section<br />

Loudspeakers 2 pairs, each with own output stage and 1<br />

active sub-woofer output<br />

1 headphone Jack socket on front panel, with own<br />

headphone output stage<br />

Aerial 75 Ohm for domestic aerial or cable<br />

connection<br />

RC-in Socket for additional remote control receiver<br />

(adjacent room)<br />

External inputs Tape, Aux,<br />

Input sensitivity Tape: 600 mV<br />

Aux: variable 250 mV – 850 mV<br />

Record output 600 mV, 150 Ohm<br />

Sine wave / peak output<br />

Sp_A 4 Ohm 2 x 60 / 2 x 100 Watts<br />

8 Ohm 2 x 45 / 2 x 70 Watts<br />

Sp_B 4 Ohm 2 x 60 / 2 x 100 Watts<br />

8 Ohm 2 x 45 / 2 x 70 Watts<br />

Total harmonic distorition < 0,02 %<br />

Frequency response 2 Hz – 150 kHz<br />

Tuning range 87,5 – 108 MHz<br />

Input stage Dual-gate-MOS-FET, regulated<br />

<strong>CD</strong>-<strong>Receiver</strong> K 1


<strong>T+A</strong> - Produktarchiv<br />

<strong>CD</strong> player<br />

Sensitivity<br />

Mono, S/N = 26 dB 0,9 uV<br />

Stereo, S/N = 46 dB 33 uV<br />

Overload margin > 110 dB uV<br />

Tuned RF stages 4<br />

Tuning system Quartz-PLL<br />

Selectivity (f = 300 kHz) 70 dB<br />

Stereo crosstalk attenuation > 40 dB<br />

Total harmonic distortion < 0,1 %<br />

Signal: noise ratio (A-weighted)<br />

(mono/stereo) >73 / 68 dB<br />

Frequency response 10 Hz – 15 kHz<br />

RDS-function Station name, Radiotext<br />

Mechanism Linear driver, 3-beam LDGU optics<br />

Frequency response 2 Hz – 20 kHz<br />

Total harmonic distortion < 0,005 %<br />

Signal: noise ratio (A-weighted) 96 / 105 dB<br />

Effective system dynamic range 94 dB<br />

Oversampling 8-times, FIR digital filter<br />

D/A converter system Sigma/Delta, 24-bit resolution<br />

Digital output SP-DIF, Coax 0,5 V / 75 Ohm<br />

Case 1,5 mm steel case with solid aluminium front<br />

and aluminium cover, removable solid wood<br />

or high gloss end panels<br />

Finishes Eloxided silver, eloxided black<br />

Special finishes High-gloss chrome<br />

End panels Black elox, silver elox<br />

Special finishes<br />

Dimensions (height x width x depth) 8 x 49 x 32 cm<br />

Weight 9 kg<br />

Mains supply 220 – 230 V, 50 – 60 Hz<br />

Power consumption, max. 300 VA<br />

We reserve the right to alter technical<br />

specifications<br />

Stand-by 2,5 VA<br />

Standard accessories Remote control F11<br />

<strong>CD</strong>-<strong>Receiver</strong> K 1

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!