'71 C30 Open Road Motorhome...RIP - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stllookn · 09-11-2005, 07:06 PM

Yeah...we should have made it into an awesome flatbed but too many projects and too little time. Besides we both needed so many parts off this thing that we could not resist. The sheet metal on this is in excellent condition...no rust! Parting...I got all the big block stuff...WHOOO HOOOO!

I like my motorhomes a little (or a lot) on the trashy side...LOL!

**FRENCHBLUE72** · 09-11-2005, 10:06 PM

Looks like that would have been alot of work to fix that camper part....

stllookn · 09-11-2005, 10:16 PM

Luke...it was trashed! I don't know how that big skylight got in there but it had been sitting open like that for months! It would have been best to tow it under a low bridge at about 60 mph and hope that it took most of it off...LOL. I'm glad americanrider (Ben) is not married and was willing to have it in his driveway for as long as it will take to part it out. It would have made a nice flatbed but the walkway cut into the back and top of the cab would have been a real nighmare to fix. Too bad since the cab is so nice and has those cool molded clearance lights that are nice for a flatbed truck. You can't save them all though.

Americanrider · 09-12-2005, 03:40 AM

It looks uglier in pictures than is is in real life..... now if I could just find my eyeglasses

stllookn (Mike) scared a possum out from under it and I beat it to death with a stick

I hate those rat-looking things anyway.

Castiron9 · 09-12-2005, 11:36 PM

stllookn · 09-12-2005, 11:49 PM

ROFLMAO!!!!!!!!!!! I had to look at that picture for a long time before I could figure it out! Rene...belly up to the bar buddy! You need a spare frontend or rearend! Nice spare set of duallys or drivelines?

CG · 09-13-2005, 12:03 AM

are you going to use the molded clearance lights? if your going to trash them i would be interested in that section of the roof .... mark

stllookn · 09-13-2005, 12:11 AM

I had a vision of a that cab on my '72 Longhorn frame with a 50 cal gun turret through that hole in the roof. SERIOUSLY!

CG · 09-13-2005, 06:04 PM

if the 50 cal. thing doesnt work out gimme a buzz

09-11-2005, 07:06 PM	#1
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,464	'71 C30 Open Road Motorhome...RIP Yeah...we should have made it into an awesome flatbed but too many projects and too little time. Besides we both needed so many parts off this thing that we could not resist. The sheet metal on this is in excellent condition...no rust! Parting...I got all the big block stuff...WHOOO HOOOO! I like my motorhomes a little (or a lot) on the trashy side...LOL! Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

09-11-2005, 10:06 PM	#2
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Looks like that would have been alot of work to fix that camper part.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-11-2005, 10:16 PM	#3
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,464	Luke...it was trashed! I don't know how that big skylight got in there but it had been sitting open like that for months! It would have been best to tow it under a low bridge at about 60 mph and hope that it took most of it off...LOL. I'm glad americanrider (Ben) is not married and was willing to have it in his driveway for as long as it will take to part it out. It would have made a nice flatbed but the walkway cut into the back and top of the cab would have been a real nighmare to fix. Too bad since the cab is so nice and has those cool molded clearance lights that are nice for a flatbed truck. You can't save them all though. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

09-12-2005, 11:36 PM	#5
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	Attached Images __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY

09-12-2005, 11:49 PM	#6
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,464	ROFLMAO!!!!!!!!!!! I had to look at that picture for a long time before I could figure it out! Rene...belly up to the bar buddy! You need a spare frontend or rearend! Nice spare set of duallys or drivelines? __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

09-12-2005, 03:40 AM	#4
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	It looks uglier in pictures than is is in real life..... now if I could just find my eyeglasses stllookn (Mike) scared a possum out from under it and I beat it to death with a stick I hate those rat-looking things anyway.

09-13-2005, 12:03 AM	#7
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,788	are you going to use the molded clearance lights? if your going to trash them i would be interested in that section of the roof .... mark

09-13-2005, 12:11 AM	#8
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,464	I had a vision of a that cab on my '72 Longhorn frame with a 50 cal gun turret through that hole in the roof. SERIOUSLY! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

09-13-2005, 06:04 PM	#9
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,788	if the 50 cal. thing doesnt work out gimme a buzz



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.