Farmers Guide January 2020 by Farmers Guide

ED1379 DOE SHOW narrow AD v1.qxp_Layout 1 09/12/2019 15:31 Page 1

Farmers Guide

January 2020

EENTS,Y E R M FRESH & ENTR

DONâ&#x20AC;&#x2122;T MISS BY FAR THE LARGEST AGRICULTURAL, CONSTRUCTION AND GROUNDCARE DEALER SHOW IN THE UK

Farmers Guide

F RE KING R PA

www.farmersguide.co.uk

Issue 485

FREE for farmers

Wash Lane, Mendlesham, Stowmarket, Suffolk IP14 5TD Tel: 01449 766157 Fax: 01449 767894 Issue 485

GAS, ELECTRICAL & DIESEL HEATERS INDIRECT FIXED, MOBILE & SUSPENDED HEATERS

â&#x20AC;¢ from 34,000â&#x20AC;&#x201C;358,000Btu

INDIRECT FIXED & SUSPENDED HEATERS

LAMMA 2020 | 7TH â&#x20AC;&#x201C; 8TH JANUARY 2020 STAND 9.210, HALL 9 AT THE NEC, BIRMINGHAM January 2020

â&#x20AC;¢ ideal for workshops â&#x20AC;¢ fume-free â&#x20AC;¢ low noise â&#x20AC;¢ inside & outside use

PORTABLE OIL HEATERS

STAR BUY

â&#x20AC;¢ clean hot air â&#x20AC;¢ trolley included

ANNIVERSARY

To find out how you can benefit from Valtra Smart Farming technologies visit us at

â&#x20AC;¢ from 250,000â&#x20AC;&#x201C;750,000Btu

INFRA-RED HEATERS

1960 - 2020

EMBRACE THE POWER OF SMART FARMING TODAY

INDIRECT TRAILER MOUNTED HEATERS

â&#x20AC;¢ from 80,000â&#x20AC;&#x201C;760,000Btu

WHAT DOES A SMART FARMER SEE?

YE AR S

Pre-register online at www.valtra.co.uk/LAMMA2020 to receive your EXCLUSIVE SMART FARMER GIFT on arrival at our stand.

INDIRECT FIXED WORKSHOP HEATERS

4th, 5th, 6th FEB 2020 | ULTING, MALDON CM9 6QH

â&#x20AC;¢ from 120,000â&#x20AC;&#x201C; 2,000,000Btu

OVER 150 TRADE STANDS... BRAND NEW FEATURE FOR 2020 â&#x20AC;¢ Tech and Innovations Hub showcasing latest technology â&#x20AC;¢ First UK launch of the New Holland T8 Genesis New Generation â&#x20AC;¢ Full range of Case IH agricultural equipment â&#x20AC;¢ Vintage tractors â&#x20AC;¢ New and used stock for sale â&#x20AC;¢ Professional Groundcare machinery and attachments â&#x20AC;¢ Construction plant and machinery â&#x20AC;¢ Chainsaw demos â&#x20AC;¢ Working demonstrations

66676

For details or a demonstration ring Tim Bradford now on

ALL MASTER PARTS AVAILABLE GREAT DEALS AVAILABLE ON SALES AND SERVICING

email sales@tworkshop.co.uk We also supply HEAVY DUTY AIR COMPRESSORS and HIGH PRESSURE WASHERS

See our website for details Covers.indd 1-4

01449 766157 fax 01449 767894

www.tworkshop.co.uk

â&#x20AC;¢ Clearance bargains â&#x20AC;¢ Parts & showroom offers â&#x20AC;¢ NRoSO/BASIS/BIGGA CPD points â&#x20AC;¢ Ex-hire stock sale â&#x20AC;¢ Country clothing store and much, much more...

www.farmersguide.co.uk

FREE ADVICE ON THE BEST HEATER TO SUIT YOUR NEEDS

> www.valtra.co.uk

#60doeshows

Valtra is a worldwide brand of AGCO.

11/12/2019 22:29

ED1379 DOE SHOW narrow AD v1.qxp_Layout 1 09/12/2019 15:31 Page 1

Farmers Guide

January 2020

EENTS,Y E R M FRESH & ENTR

DONâ&#x20AC;&#x2122;T MISS BY FAR THE LARGEST AGRICULTURAL, CONSTRUCTION AND GROUNDCARE DEALER SHOW IN THE UK

Farmers Guide

F RE KING R PA

www.farmersguide.co.uk

Issue 485

FREE for farmers

Wash Lane, Mendlesham, Stowmarket, Suffolk IP14 5TD Tel: 01449 766157 Fax: 01449 767894 Issue 485

GAS, ELECTRICAL & DIESEL HEATERS INDIRECT FIXED, MOBILE & SUSPENDED HEATERS

â&#x20AC;¢ from 34,000â&#x20AC;&#x201C;358,000Btu

INDIRECT FIXED & SUSPENDED HEATERS

LAMMA 2020 | 7TH â&#x20AC;&#x201C; 8TH JANUARY 2020 STAND 9.210, HALL 9 AT THE NEC, BIRMINGHAM January 2020

â&#x20AC;¢ ideal for workshops â&#x20AC;¢ fume-free â&#x20AC;¢ low noise â&#x20AC;¢ inside & outside use

PORTABLE OIL HEATERS

STAR BUY

â&#x20AC;¢ clean hot air â&#x20AC;¢ trolley included

ANNIVERSARY

To find out how you can benefit from Valtra Smart Farming technologies visit us at

â&#x20AC;¢ from 250,000â&#x20AC;&#x201C;750,000Btu

INFRA-RED HEATERS

1960 - 2020

EMBRACE THE POWER OF SMART FARMING TODAY

INDIRECT TRAILER MOUNTED HEATERS

â&#x20AC;¢ from 80,000â&#x20AC;&#x201C;760,000Btu

WHAT DOES A SMART FARMER SEE?

YE AR S

Pre-register online at www.valtra.co.uk/LAMMA2020 to receive your EXCLUSIVE SMART FARMER GIFT on arrival at our stand.

INDIRECT FIXED WORKSHOP HEATERS

4th, 5th, 6th FEB 2020 | ULTING, MALDON CM9 6QH

â&#x20AC;¢ from 120,000â&#x20AC;&#x201C; 2,000,000Btu

66676

For details or a demonstration ring Tim Bradford now on

ALL MASTER PARTS AVAILABLE GREAT DEALS AVAILABLE ON SALES AND SERVICING

email sales@tworkshop.co.uk We also supply HEAVY DUTY AIR COMPRESSORS and HIGH PRESSURE WASHERS

See our website for details Covers.indd 1-4

01449 766157 fax 01449 767894

www.tworkshop.co.uk

www.farmersguide.co.uk

FREE ADVICE ON THE BEST HEATER TO SUIT YOUR NEEDS

> www.valtra.co.uk

#60doeshows

Valtra is a worldwide brand of AGCO.

11/12/2019 22:29

Contents Out & About .......................................................................................................................4 Farming Policy: IPM must be part of the narrative .............................................7 News in Brief .......................................................................................................................8

Arable: Croptec: Crop protection challenges are real – be prepared for change........................................................................................ 10 New RL offers stronger choice for cereal and oilseed rape growers ............................................................................................. 14 Product efficacy and best practice is key for future slug control ....... 17 Pea and bean Recommended List launched .............................................. 18 Increased seed choice for sugar beet growers .......................................... 21

Lamma Preview: .................................................................................................. 43 Machinery:

New RL offers stronger choice for growers

Agritechnica: German mega-show continues to inspire ....................... 23 New drill impresses test users ahead of limited production next year ...........................................................................................141 Something for everyone at Essex farm machinery dispersal sale ..........................................................................................................149 Newly announced tractor a hit on Norfolk farm......................................161 First farm test of most powerful battery chainsaw .................................167

Fertilisers & Spreaders: Power on the land .................................................................................................175

Livestock: A closer look at genomic testing ....................................................................183 Limousin heifers take the limelight at Winter Stock Festival .......................................................................................186 Christmas competition ..............................................................................................152 Agricultural contractors ............................................................................................188 Henry Brown’s Vintage Page ...................................................................................192 Classified ..........................................................................................................................193 Recruitment, including About People ................................................................267

Lamma ’20 98-page special preview

161

CPD points code for Farmers Guide up until 31/5/20: CPD/84132/1920/G

For FarmAds and general enquiries call 01473 691888 Published by Early Bird Farming Publications Ltd from its office at Parkside, London Road, Ipswich, Suffolk IP2 0SS. Tel: 01473 691888. Full contact details for staff can be found at www.farmersguide.co.uk. Original articles and advertisements created by Farmers Guide are copyright and are not to be reproduced in any form without the written permission of the Editor. No responsibility can be accepted by Farmers Guide for the opinions expressed by its contributors.

ISSN: 2053-5414

Newly announced tractor a hit on Norfolk farm

Visit us at: LAMMA 2020/ HALL 10 STAND 400 NE

VARIABLE CHAMBER BALER

Finance* & Special Offers Available

* Offer Available in Mainland U.K. Only. Terms and Conditions Apply. For Full Details Contact McHale.

For the Best Deals : Contact Kieran at 07850 373 145 3

3-Contents.indd 3

11/12/2019 10:12

With Farmers Guide editor Rachel Hicks and the team

1 Machinery editor David Williams walked the equivalent of a marathon at the Agritechnica show in Hanover to bring us all the latest news. 2 After navigating around flooding and closed roads, the Farmers Guide team made it to CropTec at the East of England Showground. 3 Production editor Sarah Kidby discovered this sculpture on the Belchim stand at the Potato Industry Event, and found out it's based on the Atomium building in Brussells, originally built for the 1958 Brussells World Expo. 4 Sarah braved the cold at the Midlands Machinery Show to conduct various interviews, which you'll find online at www. farmersguide.co.uk. 5 If you see one of our Farmers Guide cars out and about, feel free to take a snap of yourself with it and post it on social media saying where you saw it, and tagging it with #fgontour for a chance to win Farmers Guide goodies...

For farmers in particular, we’re ending 2019 on a rather damp note, with the high level of rainfall hampering late harvests and winter wheat drilling. We’re also ending the year still in the EU – Brexit, like the rain, doesn’t seem to want to end right now. Which does mean more uncertainty moving into the new year, but also new opportunities. We’ve had a very busy few weeks here at FG HQ. Machinery editor David Williams took the opportunity to visit Germany for mega machinery show Agritechnica, where he walked the equivalent of a marathon over two days in order to bring you an in-depth review of the show – see page 23. Marketing manager K.M Sharp attended FarmBusiness Innovation 2019, billed as ‘the diversification and innovation event for farmers’ where she learned that over 64 per cent of English farms have diversified in some way over recent years. Find out how on page 157, where you may be inspired to innovate yourself and make your farm more profitable. Production editor Sarah Kidby headed to Yorkshire for the Potato Industry Event and then Nottinghamshire for the Midlands Machinery Show. Despite the wet ground affecting lifting, the potato growers were upbeat. Conversations were had about tackling the loss of chemicals like diquat for next year, but the feeling was generally optimistic. Midlands Machinery was a rather chilly affair, but inspiration was high with lots of new machinery on display, and there seemed to be a good number of young farmers attending the NFU talk on getting younger people into and involved in the industry. The FG team was out in force at CropTec in Peterborough, myself included, which I found to be a fantastic first agri show introduction. Coinciding with the release of the Recommended Lists, one of the main messages was that arable farmers need to be prepared for change in the light of crop protection challenges. Obviously, the weather was again a popular (or perhaps that’s not the right word) topic, with the reduced

68742

And finally... A man knocked on the door of the village farmhouse, and a boy, aged nine, answered. “Are your mum or dad at home?” asked the man. “No, they went shopping,” replied the boy. “How about your brother, Howard – is he here?” the man asked. The boy replied: “No, he went with mum and dad.” The man shuffled nervously. The boy asked if he could take a message, to which the man said: “I really wanted to talk to your dad about Howard getting my daughter pregnant.” The boy thought for a moment, and said: “You'll need to talk to my dad about that then. I know he charges £500 for the bull and £100 for the pig, but I don’t know how much he'd charge for Howard.”

SUPPLY INSTALLATION MAINTENANCE REPAIR

Covering East Anglia and the home counties

Reliable professional support 24/7 4

amount of winter wheat drilled to date expected to have a substantial impact on yields, profits and the availability of seeds for next year. You’ll find a show summary starting on page 10, plus highlights from the AHDB Recommended Lists from page 14 and the PGRO Recommended Lists on page 18. As always, we have compiled the most comprehensive guide to Lamma ’20 (this year a whopping 98 pages!) ahead of the show on 7th and 8th January. Sited at the NEC for the second year running, I’ll be there in Birmingham along with most of the team, so please do come over and say hello. Plus, for a bit of fun, you’ll find our annual Christmas competition from page 152 with the chance to win a massive selection of prizes. As something a little different, we’re also inviting you to nominate your ‘Farming Hero’ ahead of our Farmers Guide awards in spring next year – you’ll find more information on page 156, as well as online. On top of all that, we’re delighted to be able to bring you the biggest EVER issue of Farmers Guide. Packed with 272 pages, it’s been hard work but definitely worth it – and a great way to see out our 40th year and welcome in 2020. Wishing you all a happy Christmas, and a healthy and prosperous (and drier!) New Year.

t: 01206 625675

01473 487616 m: 07803 875617

Specialists in agricultural doors Roller shutter doors Sectional overhead doors Folding shutter doors Sliding doors Steel doors e: sales@essexdoorsandshutters.co.uk

www.essexdoorsandshutters.co.uk

www.farmersguide.co.uk January 2020

4-5 Out and About.indd 4

10/12/2019 16:27

THE NEXT LEVEL OF STRAIGHTFORWARD AND DEPENDABLE PERFORMANCE

MF 5711 S & MF 5713 S DYNA-4 - 110 & 130 HP MF 7720 S & MF 7726 S DYNA-VT - 200 & 255 HP NEXT EDITION Massey Fergusonâ&#x20AC;&#x2122;s Best Selling tractor models are guaranteed to take operators to the NEXT level with the NEW NEXT Edition package. Exclusive and Distinctive exterior colours, a bespoke selection of features for unmatched levels of performance and productivity, all offering exceptional value for money. Speak to your local Massey Ferguson Dealer for more information about the features and benefits of our NEXT Edition models. W W W. M A S S E Y F E R G U S O N . C O. U K

is a global brand of AGCO Corporation.

4-5 Out and About.indd 5

10/12/2019 14:45

www.sealey.co.uk

WHEEL REMOVAL TROLLEY IDEAL FOR USE ON AGRICULTURAL AND COMMERCIAL WHEELS & TYRES.

MODEL NO. W1200T

Safety bar with composite guard goes around wheel to ensure stability during transportation.

Extra large jacking handle and hydraulic foot pedal allow for one person operation. DISCOUNTS OF P UP TO r o

60%

NOW

m o t i o n

50%

Promotion valid until 29th February 2020

DISCOUNTS OF UP TO

60%

Promotion valid until 29th February 2020

150bar Pressur Washer Twin Pump and eTwin Nozzle

• Brand new patented design features two pumps and • Eco Soft cleaning twin nozzle for up mode only activates to 70% faster cleaning. • Fast cleaning one pump for light mode activates use. both pumps together gets rid of the toughest and, with the twin dirt and stains. flow nozzle, • Fitted with two 1250W motors with total 810L/hr water rate and a maximum flow pressure output of 150bar. • Model No PWTF2200

re Washer 10hp Diesel Pressu er Wash ssure sel Pre

recoil starting. with electric and nozzles. pressure washer • Diesel powered lance and five interchangeable hose, 1m gun and • 5m Pressure 250bar(3625psi). • Output Pressure: g. startin . • Flow Rate: 900L/hr. and recoil le nozzles PWDM3600 angeab electric • Model No. r with interch re washe and five d pressu and lance powere 1m gun psi). hose,

10hp Die

re r(3625 re: 250ba 5m Pressu See Page•• 21 150bar Pressure Washer Pressu r. Twin Nozzle • Output 900L/h Rate: up to 70% faster cleaning. 3600 Twin Pump and and twin nozzle for • Flow No. PWDM features two pumps Diesel

design use. • Brand new patented one pump for light mode only activates the twin flow nozzle, • Eco Soft cleaning together and, with activates both pumps • Fast cleaning mode dirt and stains. flow gets rid of the toughest total 810L/hr water 1250W motors with • Fitted with two 150bar. pressure output of rate and a maximum • Model No PWTF2200

See Page 21

• Model

See Page 21 See Page 21

CHECK OUT OUR AGRICULTURAL PROMOTION

Mounted on two locking and two non-locking swivel castors for improved stability and easy manoeuvrability.

Prices exclude VAT unless stated otherwise

Master.indd 6

OFF Locking mechanism allows rollers to be fixed at eight preset positions.

Eight adjustable rollers (4 each side) allow for easy turning of large deep tread tyres.

LIST PRICE £1134.95

£559.95 EXC. VAT £671.94 INC. VAT PROMO PRICE

11/12/2019 15:01

Farming Policy

IPM must be part of the narrative Integrated pest management, or IPM, is nothing new but it’s critical that farmers can demonstrate how and when they are using it, delegates were told in the opening address at December’s AHDB Agronomists’ Conference. Dominic Kilburn writes. The challenges in the arable sector are very real; the loss of chemicals, resistance and an ever-growing attack on the use of plant protection products (PPPs) means that we have to be very clear as to how we are using these products as part of an integrated approach, stressed NFU Combinable Crops Board chairman, Tom Bradshaw (pictured below). He suggested it was positive that the use of PPPs (in weight) fell in the mid-2000s, although the banning of sulphuric acid had accounted for much of that reduction, and in recent years the figure has started to rise again. “More worrying for me is the area applied (80,000,000ha). I want you to think today that every time you make a recommendation you are creating a statistic. And at the moment the only statistic that any outsiders have to measure how and why we are using those PPPs, is the number of hectares sprayed. “So we need a change in mindset that if it’s a marginal decision it’s no longer worthwhile being another statistic.”

Environmental focus Mr Bradshaw said that the environment is more important than ever before in political decision making and that gives the industry an opportunity to show how the

UK is growing crops, and why it is different to other parts of the world. However he said that we must be sure we are proud of every decision we make and that we can tell the narrative. “We should be able to tell members of the public how we have grown them, and hopefully get their support. “If we have to hide something then we are not doing it properly,” he added. IPM is set in legislation, he pointed out, and therefore it must be used. But it’s far more than just pest management, he stressed. “It’s about rotation, delayed drilling, increased seed rates, cultivation strategies and how we manage our farms to minimise the use of artificial inputs. And recognising the critical importance products have and not being embarrassed about the role they play in supplying safe, affordable food.”

Populist view Mr Bradshaw said it is clear that product registration is no longer simply a science based decision, but one that takes in many other factors. “The populist view is driving things – so we know how serious this has got. If backing science is no longer good enough, we really have to make sure we take others with us when using these products,” he pointed out. On one side of the decisionmaking process, Mr Bradshaw said

Growers and agronomists need to be sure that when they turn to the can, it’s the last part of a decision-making process.

there is politics and NGO pressure. He said that NGOs are so effective with their lobbying and we need to learn from them as they are having a critical influence on the PPPs that get registered, and what we can use in this country. “On the other side we have the Voluntary Initiative (VI) and we need to up the participation in it. “It’s not just about NRoSO and crop protection management plans, it’s our way of trying to demonstrate responsible use of PPPs. “We have IPM, we have crop assurance and transparency of crop protection use – but, at the moment, if someone comes to my farm and asks how I grow a crop, the first thing I say is ‘with 220kg N/ha, four fungicides and pre-ems’. I won’t tell them about cover crops, resistant varieties and beneficial habitats, but they need to know the story as that is how people will engage with us and we might be able to shift the balance back in favour of regulation and registration of those products. “Right now, political and NGO pressure seems to be winning that debate,” he added. Mr Bradshaw suggested that a lot could be learned from organic farmers who can’t turn to the can.

“We need to be sure that when we do turn to the can, it’s the last part of a decision-making process rather than, as our detractors would have you believe, the first port of call when we are growing a crop.” Concluding, Mr Bradshaw said people are needed to prove IPM concepts and they shouldn’t be scared of making mistakes. “If we are making mistakes then everybody should be able to learn from them. “It’s great to be able to tell the true story, rather than the story you think everybody wants to hear,” he said. “We also need a government that signs up to home-produced crops. It’s easy to think we will reduce our environmental footprint by reducing UK production, but all we are doing then is off-shoring our environmental impact somewhere else. “We have a moral obligation to grow crops in the UK when you look at climate change and our temperate climate. We are well positioned to provide food for others around the world and not just for ourselves.” *More from the Agronomists’ Conference will appear in the February edition of Farmers Guide.

INDUSTRIAL DOORS & STEEL BUILDINGS

(NORFOLK)

67787

INDUSTRIAL DOORS & STEEL BUILDINGS

We specialise in the supply, installation and repair of all types of industrial and agricultural doors including • roller shutters • sliding doors t: 01508 813553 m: 07935 117752 • steel security doors www.sclnorfolk.co.uk • high speed doors e: john@sclnorfolk.co.uk • folding shutters Summer Cottage, Station Road, Forncett St Peters, Norwich NR16 1HZ • PVC curtains January 2020 www.farmersguide.co.uk

6-7 Comment.indd 7

10/12/2019 20:31

Full story available online

Onion wins NIAB Centenary Variety Cup

Top marks for spreading technology The new Blackbird trailing shoe linkage with a working width of 15m from Vogelsang has been awarded top marks by the German agricultural society and test institute, DLG. The testing carried out showed that liquid manure is distributed with a coefficient of variation of less than two per cent. In addition, the precision distributors were classified as particularly user-friendly. According to the DLG examiners, maintenance work is comparatively simple and can be carried out within a very short time. Vogelsang GmbH & Co managing director Harald Vogelsang said: “We are delighted to receive this award from DLG. The test mark underpins our position as an innovation leader in the agricultural sector.”

Decades of machinery history in photo archive A new book has been published charting 66 years in the history of Massey Ferguson through the lens of photographer Ted Everett. Employed as photographer for the farm machinery brand from 1952– 2018, he captured the products, the people and the events of the firm on camera. As well as being an archive of over 300 photographs, it’s also a fascinating collection of anecdotes and memories told from Ted’s unique perspective, as well as documenting the development of manufacturing techniques and advances in machinery design. My Life as a Photographer with Massey Ferguson is available on Amazon now.

NIAB technical director Bill Clark said: “There were many worthwhile and well-known candidates including the Maris Piper potato, Apex winter OSR, Roberta sugar beet and the white clover Aberystwyth S184. But the variety that stood out was Red Baron.” It was launched in 1985 and paved the way for the widespread success

of the vegetable. It achieved a 95 per cent market share at its peak and still commands 20 per cent of sales almost 35 years later.

According to the British Carrot Growers Association, the UK is at risk of running low on domestic carrot supplies this spring, as a result of more than half of UK carrot growers being hit by recent flooding. If the

flooding continues, it is likely to prevent them from being able to put straw down to protect the crop from potential frost damage. Mark Strawson, one of the UK’s biggest carrot growers, commented: “This

year has proved to be an excellent growing season… {but} with such a small area protected to date and field conditions remaining poor, there is a very high risk of crop loss should the weather now turn cold.”

Company strengthens European presence

Lifetime achievement award honour

The National Institute of Agricultural Botany has awarded its Centenary Variety Cup to the red onion variety ‘Red Baron’, naming it the most influential UK non-cereal variety from the past 100 years in terms of agronomic value, market influence and lasting impact, most notably in their use in plant breeding programmes.

Carrot supplies at risk

In a complete restructure of its distribution network, Spearhead Machinery Ltd has established direct partnerships with new importers in 15 European countries. Spearhead’s director of sales and marketing says: “Spearhead has a strong European following. Yet, our old distribution structure kept us too distant from end users. By developing a more direct approach, we can be more competitive, and importantly, more responsive to customer feedback.” The company claims that fewer links in the distribution chain will positively impact on price, ensuring it delivers not only robust British quality, but tremendous value, too.

Former president of BASF’s agricultural solutions division has been presented with the Crop Science Award for Lifetime Achievement, for his consistent history of service above and beyond the call of duty during his 40-year career. Markus said: “It is a great honour to receive this award. I love this dynamic, ever-

changing industry which has a powerful impact on everyone’s lives. If we are talking about agricultural achievements, then mine are tiny compared to what farmers achieve every day. Therefore, I want to dedicate this award to the lifetime achievement of farmers around the world for doing the biggest job on earth.”

DOOR SERVICES LTD Industrial Door Specialists

• Installation • Repairs • Planned Maintenance Specialists in Building & Perimeter Security 68682

Tel/Fax: 01245 600235 Mobile: 07887 806603 e-mail: info@landjdoorservicesltd.co.uk

www.landjdoorservicesltd.co.uk 8

Agricultural doors Steel roller shutters – galvanised and powder coated Insulated roller shutters for cold stores Pass door and steel hinged door sets High speed rapid roll doors Insulated sectional doors

24hr call out

• • • • • •

www.farmersguide.co.uk January 2020

8-9 NIBS.indd 8

09/12/2019 16:42

News in brief NSA responds to Waitrose commitment The National Sheep Association has welcomed the announcement made by Waitrose at the end of November that it plans to source all of its lamb from British producers from summer 2021. This will apply to both fresh and frozen all year round. NSA chief executive Phil Stocker comments: ”NSA sees it as a strong statement of support to British sheep

farming. The world is changing rapidly and within this, we are seeing trade dynamics change too. Our New Zealand counterparts will see this as an unfavourable move but there is no denying that the sustainability agenda is driving a change in attitude, with many nations seeking to protect their own interests and to localise trade where it makes sense.”

Test proves longer tyre lifespan Recent testing by the German test institute DLG has confirmed Vredestein Traxion tyres to be more economical than competitor tractor tyres over their lifetime. DLG fitted Vredestein Traxion XXL tyres and tyres from a premium competitor on six John Deere 6215R tractors. Each tractor was fitted with the JD Link, a system which logs the work and position of the tractor. DLG found the Vredestein Traxion XXL had an over 50 per cent longer lifespan compared to the

other. “These results show that Vredestein Traxion tyres provide a longer operating lifespan and savings of €1 per operational hour,” says Ruud Nijland, division head of highway tyres at Apollo Vredestein. “For a contractor this could easily translate into €1,000 per tractor per year.”

Special edition Fastracs celebrate record Following the Guinness World Record success of the Fastrac Two, JCB is releasing special editions of the Fastrac 4220 and 8330. Featuring unique specifications, only 25 of each tractor are being

produced and interest is already high in Europe, North America, New Zealand and Australia, with orders already being placed. The enhanced appearance and tech of the special edition tractors celebrates a remarkable achievement by a team of young JCB engineers and project partners. Each purchase comes with a certificate of authenticity for the owner.

Avian flu outbreak in mid-Suffolk

Contractor 2019 event cancelled The National Association of Agricultural Contractors (NAAC) cancelled the Contractor 2019 event on 12th December, citing “a perfect storm of a general election, uncertainty in the industry and unprecedented bad weather leaving insufficient numbers of contractors able to commit to the event this year”. NAAC chief executive officer Duncan Russell commented: “As an association we will now focus on supporting our membership and looking towards future opportunities for our sector as a new era of farming unravels.” Farmers Guide was due to have a stand at the event, so it’s a great shame that it had to be cancelled as we were looking forward to meeting our valued contractors and readers. The association will now consider how to move the event forward in 2020. Farmers Guide will keep readers updated on this in due course.

An outbreak of H5 low pathogenic avian flu was confirmed on a commercial chicken farm in mid-Suffolk on 10th December – the first confirmed case in the UK since June 2017. All 27,000 birds will now be humanely culled and Defra has placed a 1km restriction zone around the infected farm, to reduce the risk of disease spreading. The case was picked up by a private veterinary surgeon who was investigating a drop in egg production in the flock. An investigation is underway to determine the source of the outbreak. Chief veterinary officer Christine Middlemiss, said: “We are urgently looking for any evidence of disease spread associated with this strain to control and eliminate it.”

Quarter of a million seed drills sold Amazone certainly has special cause for celebration, having sold an impressive 250,000 seed drills to date. Not only is the quarter of a million sales that have been notched up an impressive feat; but the company can also look back on a long history of successful seed drill developments, culminating in an impressive product portfolio which allows Amazone to offer its customers a broad range of seed drills and sowing methods in working widths ranging from 2.5–15m for a whole host of operation sizes and soil structures.

Medical drop-in to help farm patients The Latham House Medical Practice at Melton Mowbray Market has announced they’ll be providing a drop-in session with a clinic nurse one Tuesday a month for the practice’s registered patients. According to Melton Mowbray Market: “Our farmers look after the nation with the quality food they produce, however quite often they don’t have time to look after themselves – this initiative with Latham House allows them to address that while at the market and we are pleased to be a part of it.”

January 2020 www.farmersguide.co.uk

8-9 NIBS.indd 9

11/12/2019 09:56

Report

Crop protection challenges are real – be prepared for change The crop protection seminar and technical hubs at this year’s CropTec event highlighted some of the key challenges growers are facing, as well as providing practical measures for improved weed control. Heather Briggs reports. There are a number of threats and opportunities in crop protection, said Fiona Burnett (right), professor of applied plant pathology at Scotland’s Rural College (SRUC) and sector lead for agriculture at Scotland’s Plant Health Centre. Speaking at the CropTec Crop Protection seminar, she noted that when offered a binary choice between food with or without pesticides, public opinion comes down on the side of no pesticides. Other threats include legislation, sub-optimal practices and knowledge gaps. Pesticide resistance is also a growing problem, especially as fungicide resistance is eroding established actives and threating new ones. Moreover, estimations are that it will take between five and eight years for new technologies to be able to ameliorate such losses for farmers to get back to the yield levels of the previous full pesticide cupboard.

Opportunities However, the picture is not completely bleak as there are some opportunities. New active ingredients are coming on the market, albeit slowly, and better stewardship will help retain existing ones, Prof Burnett said. “Heavy usage of an active confers a massive advantage to resistant individuals, so stewardship measures based on reduced reliance are very important, as is the advice to use all measures to reduce pressure on chemistry; this includes mixing, alternating and using low-risk multi-sites.” Prof Burnett noted that advice should be based on understanding when crops respond best and when other sprays can be stripped back or minimised. For wheat, protecting the flag leaf is key, while for barley the most important application is at T1 and later sprays after T2 tend not to respond well. Sustainable practices with market premiums and good public support could provide an

important way forward when managing with less and protecting what is left. “Do everything to reduce risk, such as managing rotations, choosing resistant varieties, using certified seed, monitoring crops and tailoring sprays according to the threat. “Keep abreast of developments and follow the best technical advice. Challenges are real and we need to prepare for change,” advised Prof Burnett.

Herbicides Weeds are plants out of place in a crop, but on a headland they can provide cover and food for wildlife, said ADAS weed specialist Dr Sarah Cook. However, some weeds are highly competitive, and can have adverse effects on yields; for example just two cleavers, five wild oat plants, Italian ryegrass or sterile brome per m2 can each result in a five per cent loss in yields. “Moreover, charlock can raise erucic acid levels in oilseed rape, so there is a clear drive to control them,” Dr Cook said, adding that this used to be difficult as they are a species related to the crop, but is now possible by using Clearfield technology. “Using herbicides for weed control is expensive and are the highest input cost for growers,” she commented further. She expressed concern that glyphosate may be under threat – not from any scientific evidence but from pressure applied because of public opinion. “This will make cropping both more difficult and expensive, and rather than using a single pass, there will have to be a return to annual ploughing, and it may even result in the need to cultivate larger areas to achieve the same output of crop.” Dr Cook noted that with grass weed control there are options for cultural control because they mainly emerge from the top 5cm of soil. While cultivations bury some seeds, they also bring others towards the surface where they can then germinate. “The good news is that grass weeds have a

persistence of around five years, but broadleaved weeds can persist for over 10 years.” There is also speculation, but as yet little evidence, that resistant strains of broad-leaved weeds are appearing. “As we lose more herbicides, choices are decreasing so this increases the pressure on those we have left, and we may see new weeds coming into crops. “Couch may also reappear from the margins and there could be challenges from sulfonylurea resistant poppy, mayweed and chickweed. “We need to learn the lessons from other resistant species such as certain grass weeds.” A new case of resistance has been discovered in prickly sow-thistle, which is resistant to imazamox, metsulfuron-methy and thifensulfuron-methyl Climate change may also play a role by facilitating new and different weeds to thrive in Britain, such as common ragweed, which originated in North America. “Populations are already established in Hungary, France and Croatia, and, as this plant has highly allergenic pollen, it is causing significant health problems. “These problems are likely to become worse in response to higher carbon dioxide levels over a longer period. “Once it becomes established, control measures are both labour intensive and expensive. “In the end it is not the weeds that you can control that is important, it is those that you cannot control.”

Black-grass Seed bank dynamics play a crucial role in long-term black-grass control, said NIAB weed management specialist John Cussans (right), speaking at the Blackgrass Hub. This is because seedlings are just five per cent of the total black-grass populations and the remaining 95 per cent lurking underneath the surface need to be managed to keep on top of the continued over…

10 www.farmersguide.co.uk January 2020

10-13 croptec (110).indd 10

10/12/2019 20:39

REVYSTAR XE. A FUNGICIDE THAT WORKS AS HARD AS YOU. ®

THE REVYLUTION IS HERE

Farming is about to change. With the new cereal fungicide Revystar® XE, you’ll have the power to achieve superior and consistent yields, year after year. Thanks to best-in-class control of Septoria even against current resistant strains*, Revystar® XE allows you to secure your income. So, for higher performance and even greater crop care – join the revylution.

basfrealresults.co.uk/revylution

NEW FUNGICIDE

CARE

SIMPLICITY

CONFIDENCE

HIGHER, CONSISTENT YIELD AND INCOME

SIMPLIFIED DECISIONMAKING AND PLANNING

LESS RELIANT ON PERFECT WEATHER CONDITIONS

REVYSTAR XE ®

IS NOW AVAILABLE

*BASF trials - Efﬁcacy of various DMI compounds against highly adapted strains of Zymoseptoria tritici in the glasshouse.

Revystar ® XE and Revysol ® are registered Trade Marks of BASF. Revystar ® XE contains Revysol ® and Xemium. Revysol ® contains mefentriﬂuconazole. Xemium contains ﬂuxapyroxad. Always read the label and product information before use. For further product information including warning phrases and symbols, you can refer to agricentre.basf.co.uk.

10-13 croptec (110).indd 11

05/12/2019 11:53

Report …from previous page

weed. But it is not necessarily just a numbers game; the location where the seeds are in the bank is key to understanding a field’s weed burden, he said. This is because seeds need to be in the top 5cm of soil to be able to germinate and once buried, their viability declines at between 75–80 per cent each year. A recent weed seedbank assessment led by Mr Cussans as part of Bayer’s Black-grass Task Force in Action looked at weed seed distribution in soil samples from a range of depths on two farms using different cultivations strategies; deep non-inversion and no-till. “There was a clear difference as no-till had the highest concentration very close to the surface,” he revealed. However, germinated weed seedling numbers were the same on both farms. Mr Cussans said: “The proportion of shallow seedbank recruited seedlings is lower in no-till and these observations showed that no-till resulted in a two- to three-fold reduction on how much of the surface reservoir is stimulated to germinate. “Nevertheless, even if you spray off what is on the surface the absolute total size of the seedbank is higher so you still have the reservoir in the seedbank which will need managing to keep on top of the weed. “Otherwise you could be just one poor establishment event away from becoming a black-grass victim.”

Effective spraying Getting boom height, water volume and forward speed right is key for effective pre-emergence weed control, said Syngenta eastern application specialist Harry Fordham (right), speaking at the Syngenta Spraying Hub. Pre-emergence herbicides are now the backbone of autumn black-grass herbicides, so ensuring the best possible efficacy from application technique is crucial. “Boom height has a huge influence on drift and making sure the herbicide hits its target,” he said. This is partly because of reduced boom stability, but also the time of year can affect accuracy,

especially when higher speeds are used. “In the autumn, the warm soils create rising currents, so there is more turbulence behind the boom which impacts on small spray droplets, so fewer hit the soil in the right place.” This is even more noticeable on bare soil, where there is no crop to drag down and capture smaller spray droplets.

“

Boom height has a huge influence on drift and making sure the herbicide hits its target. “Moreover, when the sprayer operator is travelling at 16kph, drift can be 10 times more than when travel is 6kph, trials have shown. We recommend not going over 12kph when applying pre-emergence herbicides,” he emphasised. Getting water volume right can make a real difference, too, he added, noting that more than 200 trials have shown 200-litres/ha gives the best combination of coverage and efficacy. Mr Fordham said: “One of the challenges, particularly this autumn, has been the limited window of good spray days. Between the beginning of September and the end of November there have been just five. “We know the 3D nozzle works extremely well under perfect conditions but, where conditions may be compromised, the 90 per cent drift reduction nozzles really come into their own,” he added. “In trials they have matched or exceeded the 3D nozzle, with the best performance so far from the 90 per cent Teejet drift reduction nozzle.”

OSR improvement Average seed number stands out as the main determinant of performance success with OSR, according to ADAS analysis of the first three years of the Oilseed YEN competition reported at CropTec. Speaking at the event’s Dekalb OSR hub, ADAS head of crop physiology, Dr Pete Berry explained that this single factor has accounted for 66 per cent of the 4.8t/ha yield variation recorded between the 150-plus crops involved in the benchmarking competition to date. “To have a chance of getting 5t/ha you need more than 100,000 seeds/m2,” he stressed. “And

SHORT OF STORAGE SPACE? 02476 459000

y t

Nutrition “On the nutritional side, both soil and post-harvest seed analyses have highlighted a relationship between the highest yields and higher-than-normal magnesium contents which we are investigating further to establish the extent to which this link could be causal,” he continued. Dr Berry agreed that the vagaries of the season have an important influence on OSR performance. Indeed, long-term ADAS studies show dry Decembers, warm Marches, dry and sunny Aprils and cool, wet Mays are associated with the highest yields. However, he stressed that weather factors only account for less than 40 per cent of the variation recorded in annual crop yields. Which obviously leaves more than 60 per cent associated with farms and farming factors, many of which can actually be controlled. “As it develops and grows, the Oilseed YEN competition is yielding better and better intelligence on the most important farm limitations to OSR performance to inform national improvement efforts. “Every bit as important, it is allowing the growers involved to benchmark their production systems with others across the country for around 70 individual parameters so they can identify the elements they can most usefully focus on to improve their own particular enterprise performance. “With the YEN approach we look forward to providing increasingly accurate guidance on the best ways of improving the level and consistency of UK OSR production, and to working closely with forward-thinking growers to explore a range of the most promising improvement options and ideas under field conditions where it really matters.” FG

CMY

Competitive prices for all your agricultural & industrial requirements

69000

BOWIE LOCKWOOD sales@bowielockwood.co.uk

since seed number is determined by the amount of light intercepted in the 2–3 weeks after flowering, in our experience this means a well-structured canopy with a green area index (GAI) of between 3.0 and 4.0. “The highest yielding 25 per cent of our YEN crops have also come from noticeably lower seed rates than average, as well as receiving more fungicide applications. We’ve seen a clear and consistent association between yield and the number of days from flowering to desiccation too. On average an extra 11 days of seed setting and pod filling has accompanied a yield difference of more than 1t/ha.“

RIDBA

Rural & Industrial Design & Building Association

*prices subject to site survey & location All prices subject to VAT

12 www.farmersguide.co.uk January 2020

10-13 croptec (110).indd 12

10/12/2019 20:40

ALLY MAX SX ®

“If you want the best, you have to choose the best” 1. Unique SX® formulation

2. Faster, safer washout C

3. Broad spectrum weed control

CMY

ALLY® MAX SX® Herbicide

• Broadest tank mix compatibilities supported with the widest range of approved ALS tank mixes and sequences • Consistent quality, reliability and traceability

USE PLANT PROTECTION PRODUCTS SAFELY. ALWAYS READ THE LABEL AND PRODUCT INFORMATION BEFORE USE. UNLESS OTHERWISE INDICATED, TRADEMARKS WITH ® OR ™ ARE TRADEMARKS OF FMC. ALLY® MAX SX® CONTAINS - 143 G/KG METSULFURON-METHYL AND 143 G/KG TRIBENURON-METHYL

10-13 croptec (110).indd 13

05/12/2019 11:54

Arable

New RL offers stronger choice for cereal and oilseed rape growers KWS variety Blazen.

Oilseed rape has dominated the new varieties to the AHDB Recommended Lists 2020/21 offering, in many cases, a large yield advantage over existing material. Dominic Kilburn attended the launch in early December. While this season is again showing that major challenges growing oilseed rape remain for many growers, it should at least be welcome news that there is no shortage of new material coming through from breeders with increased yields and improved traits. Overall there are eight general purpose varieties which are new to the RL with up to four per cent improvement in yield over the previous top yielding variety, while five specialist varieties including clubroot resistant, semi-dwarf, Clearfield and HEAR types also make the new RL. In addition, 25 per cent of all varieties on the RL now have turnip yellows virus (TuYV) resistance and there are improved ratings for key

diseases stem canker and light leaf spot. Launching the new Recommended Lists, RL manager Dr Paul Gosling (right) began by highlighting the five general-purpose oilseed rape varieties recommended for the UK region – all coming from the same breeder, Limagrain. Compared with previous highestyielding variety Aspire, conventional variety Acacia has a three per cent UK gross output yield advantage (109), a four per cent advantage East/West (110) and three per cent (108) in the North. According to Dr Gosling, the variety has good stem stiffness with a

high resistance to lodging (based on limited data), is relatively short and a little weaker on disease. Conventional, open-pollinated variety Aardvark also gains recommendation for the UK and while its E/W yield is a little down compared with Aspire, it is ahead in the North (106). “This variety has high resistance to lodging (based on limited data) with good stem stiffness at maturity,” pointed out Dr Gosling. “It has high resistance to light leaf spot (7), is a relatively earlyflowering variety but, like Acacia, lacks TuYV resistance. “It will be more attractive to growers in the North,” he added. Also with UK recommendation are three new hybrid varieties: Ambassador, Artemis and Aurelia which all offer high treated gross outputs. Ambassador has a high treated gross output (E/W), high resistance to lodging (based on limited data) with good stem stiffness at maturity, as well as high resistance to both light leaf spot (7) and stem canker (8). It also has resistance to TuYV and is a relatively early-maturing variety. Artemis has given a very high treated gross output in the E/W and North (based on limited data) regions. It is a relatively tall variety but has high resistance to lodging (based on limited data) with good

For the UK, SY Insitor (left) and KWS Kinetic offer improved treated yield, compared with current sector leaders.

stem stiffness at maturity. Artemis has high resistance to stem canker (7) and is resistant to TuYV. It is a relatively early-maturing variety. With a high treated gross output in the E/W and North, Aurelia has high resistance to lodging (based on limited data) with good stem stiffness at maturity. It also has high resistance to light leaf spot and stem canker (both 8) and is resistant to TuYV.

Regions Two hybrids in Dazzler and Darling (bred by DSV) have gained recommendation for the E/W region only. Their yields are a little down on Aspire (104 and 103 respectively) but both have good lodging resistance (limited data), stem stiffness at maturity, high resistance to stem canker (both 8) and resistance to TuYV. Dazzler is relatively early maturing. Recommended for the North only is conventional KWS variety Blazen and limited data suggests that this variety has given a high treated gross output in that region (105). It has high resistance to lodging (based on limited data) and is very stiffstemmed at maturity. Blazen has high resistance to stem canker (7), added Dr Gosling.

Specialist varieties Turning to new entries on the RL with specific purposes, DSV’s hybrid Crocodile (105) has been recommended for E/W as a clubroot resistant variety. “It has a three per cent yield advantage over Crome and similar lodging (8), stem stiffness, height and susceptibility to stem canker. “Basically it’s a Crome with more yield,” he suggested. Croozer from LSPB is another hybrid for the E/W region with clubroot resistance. The variety has similar yield and resistance to lodging (limited data) to Crome, is a little earlier to mature and has very high (9) resistance to stem canker. “It’s important to remind growers that some strains of clubroot are able to overcome the resistance in these varieties and growing them repeatedly will select for these more virulent strains, potentially causing the resistance

14 www.farmersguide.co.uk January 2020

14-16 recommended list (122).indd 14

08/12/2019 15:18

New general purpose OSR varieties to the RL Variety Acacia Ambassador Aurelia Artemis Aardvark Dazzler Darling Blazen

Type Conventional Restored hybrid Restored hybrid Restored hybrid Conventional Restored hybrid Restored hybrid Conventional

Region UK UK UK UK UK E/W E/W N

New specialist OSR varieties to the RL Variety Crocodile Croozer PX131 Nizza CL Resort

Type Restored hybrid Restored hybrid Restored hybrid Restored hybrid Restored hybrid

genes to become ineffective. “This year we have separated clubroot resistant varieties in the RL tables and growers should carefully follow the guidelines on how to use them,” advised Dr Gosling. Coming onto the UK List as a ‘described’ variety to “keep the interest in semi-dwarf types”, PX131 from Corteva has a gross output of 97, good stem stiffness (9), shortness of stem (9) and has good resistance to light leaf spot and stem canker. Also recommended for this region is the herbicide-tolerant (Clearfield) variety Nizza CL (from RAGT). This has stiff straw, good stem canker resistance but a low light leaf spot resistance rating (4). Finally, Resort (from LSPB) replaces Ergo on the List as a described HEAR variety. Compared with Ergo, Resort offers increased gross output yield and better disease ratings. It is recommended for the UK.

Winter wheat Only four new winter wheat varieties made the 2020/21 RL; three hard Group 4s and one soft Group 4. RGT Saki (RAGT) is the soft Group 4 recommended for the UK region and comes with a very high yield of 104, sitting between Skyscraper and Spotlight. According to Dr Gosling, its untreated yield (84) is where the interest in this variety will be. “It has strong disease rating – septoria tritici (6.8), yellow rust (9) and brown rust (8) – good resistance to lodging and orange wheat blossom midge (OWBM) resistance. “However it doesn’t get a recommendation for UK distilling and is a little later to ripen (+3 on Skyfall),” he said, adding that its specific weight (75.7) could potentially be an issue. SY Insitor (Syngenta), KWS Kinetic

Region E/W E/W UK E/W UK

Special character Clubroot resistant Clubroot resistant Semi-dwarf Clearfield HEAR

LG DIABLO SPRING MALTING BARLEY

(KWS) and Theodore (DSV) are the new Group 4 hard varieties. For the UK, SY Insitor and KWS Kinetic offer improved treated yield, compared with current sector leaders (105 and 104, respectively), good specific weight and OWBM resistance. However, brown rust in SY Insitor and septoria tritici in KWS Kinetic will need watching, said Dr Gosling. Recommended for the West, Theodore has a strong overall disease package, including exceptional septoria tritici resistance (8.2) and a high untreated yield. However, its relatively low specific weight (73.8) may concern some growers.

Rust caution During 2019 higher than expected levels of yellow and brown rust were seen in a number of winter wheat varieties in some trials and, acknowledging this, Dr Gosling said that while careful analysis of the 2019 data from RL trials did not reveal dramatic changes in average disease ratings, given the highly dynamic nature of yellow and brown rust populations in the UK over recent years, all varieties should be closely monitored for rusts. “In line with this, for the 2020/21 RL, rust ratings are highlighted within a yellow box on the tables accompanied by a note emphasising the need for growers to monitor all varieties in all situations, as they can respond in a different way to the ratings,” he explained.

LG DIABLO

Open the Gates to Opportunity The highest yielding Recommended Spring Barley with Full Approval for Malt Distilling and under test for brewing by the Malting Barley Committee

Spring wheat Group 2 KWS Giraffe (from KWS) is the only addition to the spring wheat List and, despite its name, is one of the shortest spring wheat varieties on the RL.

@LGSeedsUK www.lgseeds.co.uk/lg-diablo

continued over…

Tel: 01472 371471 www.lgseeds.co.uk enquiries@limagrain.co.uk January 2020 www.farmersguide.co.uk 15

14-16 recommended list (122).indd 15

08/12/2019 15:19

Arable SY Splendor.

…from previous page

Lower yielding (103 spring sown) than KWS Cochise, it makes up for that with its quality – good specific weight (79.8), Hagberg (271) and protein (13.3) – although baking trials have shown a bit of variability, hence its Group 2 position. It has a similar disease package to Cochise and is slightly earlier.

Spring barley Four new spring barley varieties are on test for malting. SY Splendor (from Syngenta), for brewing, offers

a yield improvement over current varieties at 107 (UK), with good specific weight. Iconic (from Agrii), also on test for brewing, has recommendation for the West region. This variety has given high treated yields in the North region and limited data suggests it has a high yield potential in the West. Limited data also suggests that it has relatively stiff straw with high resistance to brackling. Iconic has given high yields in untreated UK trials and has high resistance to mildew (9). Firefoxx (from Elsoms Ackerman) is a new malt distilling variety with improved yield, especially in the West region. Finally, SY Tungsten (Syngenta) has potential for both brewing and malt distilling. It offers improved yield, particularly in the West (105) and North (107) regions. Two new spring barley feed varieties, Fairway and Prospect (both from Senova), offer increased yield over current varieties, particularly in the East and North regions.

Winter barley Minor changes feature on the winter barley List with no new

recommendations for malting. KWS Hawking (KWS) and Jordan (Elsoms Ackerman) are both two-row feed varieties. KWS Hawking has one per cent more yield than KWS Gimlet for the UK and West regions and the same (106) for the East. It has a similar agronomic package to Gimlet, including ripening and lodging resistance. Jordan has increased yield over Surge in all regions, a higher untreated yield, similar disease resistance and is a little later to ripen.

Oats With no new recommendations for winter oats, WPB Isabel (from KWS) is the only newcomer to the spring oat RL. As well has having a high yield (104), Dr Gosling reckoned the variety would be of interest for its quality, featuring a high kernel content (76.8) and specific weight (55.7). Limited data suggests that the variety has very high resistance to lodging, he added. FG

Digital RL changes AHDB has acknowledged that, while the RL contains a huge amount of information, until now, it may not have been as accessible to growers as it could have been. To that end, a new app will be launched in May 2020 as a direct The RL app replacement for the previously will be available produced Pocket Books – freely in 2020. available to levy payers and ideal for use during the trials demonstration season summarising variety data. In addition, and after extensive testing, AHDB’s interactive ‘Variety selection tools’ will enable users to sort and filter RL data based on their own preferences, to give a clear visual representation of the relative agronomic merits of each variety.

Aahh

h...

Are you looking for a variety with… Incredibly high yields Market opportunities for brewing and distilling MBC Approval

Laureate spring barley is here!

Syngenta UK Ltd. Registered in England No. 849037.

Capital Park, Fulbourn, 5XE. CB21 5XE. Syngenta UK Ltd. Registered in England No.CPC4 849037. CPC4 Capital Park,Cambridge Fulbourn, CB21 Cambridge Tel: +44 (0) 1223 883400 Technical Enquiries: +44 (0) 800 1696058 Tel: +44 (0) 1223 883400 Technical Enquiries: +44 (0) 800 1696058 Email: customer.services@syngenta.com Email: customer.services@syngenta.com Website: www.syngenta.co.uk Website: www.syngenta.co.uk

14-16 recommended list (122).indd 16

08/12/2019 15:19

Arable

Product efficacy and best practice is key for future slug control In East Anglia, the establishment of healthy rape crops in order to withstand flea beetle damage is of paramount importance and growers’ investment in a sustainable and effective slug control strategy has been critical. According to Agrii’s eastern area technical manager, Will Foss, advising in Suffolk, Cambridgeshire and down into the south east as far as Kent, he is keen to make sure that efficacy is combined with best practice and environmental responsibility. With the on-going uncertainty regarding the availability of metaldehyde – potentially leaving a gap in effective control and profitability – Mr Foss’ team has

embraced a changeover to ferric phosphate and has been pleasantly surprised with the positive results seen and the extra benefits incurred as a result. “We have used ferric phosphate to good effect so far,” he says. “In a range of conditions, crops and soil types we have been impressed with the spreadability, palatability and persistence of the product in a series of direct comparisons with metaldehyde. “In fact the transition between products has been incredibly smooth and we are effectively seeing like-forlike control.” De Sangosse brand Fe-Lyn (a 24.2g/kg ferric phosphate formulation) is used, which has a maximum individual dose rate of 7kg/ ha and maximum total dose per crop of 28kg/ha. Looking for an optimum number of baiting points of 40/m2, he is confident of the quality of both the product and the chemistry. “With the slug pressure this year, Cereal grain hollowing by slugs could be a problem especially where crops follow OSR.

Rape needs to be protected during establishment.

we’ve looked to keeping the number of baiting points to that level,” he explains. “But in dry conditions with less pressure, you could maybe get away with 30/m2. On the whole, our growers are willing to pay a bit more for that quality and the better formulation. “Other products have now entered the market place but using an inferior brand can end up becoming a false economy,” he adds.

Environmental The environmental benefits of using ferric phosphate over metaldehyde were noticed at an early stage and Mr Foss points out that its lack of buffer zone requirement and contribution to protecting water quality made it an easier sell, especially as the efficacy of metaldehyde was matched. The wet process formulation using durum wheat means that persistence under wet and challenging conditions is good and the product stays working for longer.

“If wet conditions persist, then we could be looking at a big slug year,” he says. “As well as protecting the rape during establishment, cereals are a high risk too, especially wheat following rape. Having said that, risk assessment is always essential and before recommending any product we would be looking to test bait and monitor crop damage and assess thresholds before applying anything. “It’s up to us and our growers to look at cropping and field history and identify the higher at-risk areas and scenarios. The situation is challenging, but at least we know we now have a tried and tested alternative in our armoury,” he concludes. FG

Sancroft Agri Services es Ltd

68899

NSTS Testing, Service & Repairs on all makes of crop sprayers

Glasson Fertilisers is a national manufacturer and distributor of fertiliser, we have one of the widest ranges of fertiliser products and related services on the market. Key to our strategy is a continuous programme of innovation and product development aimed at improving nutrient efficiency and farmer returns on fertiliser. Our fertilisers are manufactured at state of the art facilities at our four production sites. At Glasson Grain we understand the economics of crop production and the vital importance of safeguarding your crop against pests and diseases. We also appreciate the need to minimise production costs and give you the best possible return on investment. We aim to offer impartial advice and the best value product range possible.

We are newly appointed dealers for sprayers

COST EFFECTIVE CROP PROTECTION in action Fertilisers

Crop Protection

Contacts: • Fertiliser 01524 753600 • Crop Protection 01524 753606 Glasson Grain Ltd West Quay Glasson Dock Lancaster LA2 0DB Tel: 01524 752200 Fax: 01524 751603 Email: info@glassongrain.co.uk

CALL NOEW R for WINT G SERVICIN

Contact Nick Hambling Sancroft Agri Services Ltd

Please contact us with any enquiries on FARMGEM plus all your other crop sprayer requirements

Frogs Hall, Wilby, Eye, Suffolk IP21 5LF mobile: 07748 644975 email: sancroftagri@hotmail.co.uk

www.glassongrain.co.uk 69099

January 2020 www.farmersguide.co.uk 17

17 De Sangose (125).indd 17

09/12/2019 10:19

Arable This year’s trial yield for combining peas of 5.02t/ha was up on the five-year (4.5t/ha) average.

Pea and bean Recommended List launched Seven new combining pea varieties and four spring bean varieties account for the new entries onto the PGRO Recommended List 2020, while a number of varieties including winter beans gain full recommendation status. Speaking at the launch held at CropTec in late November, PGRO principal technical officer Stephen Belcher (right) said that 2019 was especially difficult for spring-sown crops in trials with a lack of rainfall from mid-March to 23rd April, however both yield and quality have been better than the “easily forgettable” 2018 season. “Within the Pulse Recommended Lists the mean yields of the control varieties from 2019 have been similar to, or better than, the five-year average, with winter beans one per cent higher,

spring beans 0.1 per cent lower and peas 11.6 per cent higher,” he commented.

Combining peas This year’s trial yield for combining peas of 5.02t/ha was up on the 5-year (4.5t/ha) average despite a range of problems encountered in trials including foot rot, severe downy mildew and uneven establishment. Highest yields came from a site in Lincolnshire at 5.26t/ha, while late infections of downy and powdery mildew were seen in some trials. Aphid-transmitted virus symptoms

were regularly seen, added Mr Belcher. White-seeded variety Manager gains a full recommendation for 2020. Yields (105 per cent) are just ahead of Karpate (104), the highest yielding fully recommended white pea. Kameleon and Orchestra both gain a provisional (P1) recommendation for 2020. Orchestra (106) is just ahead of Manager in terms of yield, but has a rather low rating for downy mildew resistance of 4. The yield performance of Kameleon (114) was exceptional, he said, outyielding its nearest rival by 7%. Kameleon has relatively early maturity, stands reasonably well and has a downy mildew rating of 5.

Karpate and Kareni remain as fully recommended varieties. Mascara, while having the best downy mildew rating in the white category, was removed from the RL, he added. Large blues Bluetime, Karioka and Blueman all gain a full recommendation for 2020. Yields of Bluetime (106) are 8 eper cent higher than the highest fully recommended large blue Prophet. Karioka (104) is just two per cent lower than Bluetime, while Blueman is a little lower still (100). Blueman maintains an impressive rating for downy mildew of 8, while Bluetime and Karioka rate just one point behind on 7. Blueman has a relatively low thousand seed weight. Mankato and Croft move from P1 to P2 recommendation. New to the RL for 2020 are Kactus, Greenwich and LG Aviator. Kactus (107) tops the yield rankings of the large blues, some nine per cent above Prophet. Greenwich (104) is three per cent lower than Kactus and LG Aviator (99) a little lower still. Kactus and LG Aviator show good tolerance to downy mildew with a rating of 7, just one point off the best. Prophet, Daytona, Vertix and LG Stallion all remain with a full recommendation. Bluetooth and Kingfisher are moved to the becoming outclassed category. Greenwood (small blue), Mantara and Rose (both Maples) remain as fully recommended varieties. Marrowfats Banshee (83) and Octavia (82) gain a provisional recommendation for 2019. Both yield just a little lower than Sakura (84), as is their downy mildew ratings (3), while their standing ability (7) is a little better. Sakura remains with full recommendation and Aikido is removed from the list. continued over…

Equipment - Livestock - Feed - Fertiliser - Seed - Cash Flow Diversification Projects - Building - Debt Consolidation • Finance from £15k to £2m • Excellent rates • 6 Month to 5 year terms • Tax Efficient • Simple, quick phone application

• Decision within 24 hours • Bad credit history, large debts – No problem! • High street banks unsupportive • Tenant farmers welcome

We bring the personal touch back into farm finance. For the personal touch ring Dean Pollen on 07902 645650 or apply on line at www.abfltd.co.uk

68932

18 www.farmersguide.co.uk January 2020

18-20 PGRO (095).indd 18

09/12/2019 20:07

ARION 600 – “It’s got it all”

“

The ARION has plenty of power, but in a compact frame, so it’s very manoeuvrable. It’s very comfortable to operate, the cab specification is right, the suspension’s very good and visibility excellent. It’s got it all.

”

Josh Phillips, GB Phillips & Son, Pembrokeshire, ARION 660, September 2019.

PROACTIV front axle with increased carrying capacity and comfort levels and reduced maintenance.

CIS+ – a new mid-range offering complete with electric programmable spools.

660 Cmatic model topping the range with 205hp CPM transport boost.

CEBIS touch screen.

The extended range 145-205hp, 6 cylinder ARION 600 and 125-165hp, 4 cylinder ARION 500 provide improved performance across a wider horsepower range with additional specification offerings.

claas.co.uk

18-20 PGRO (095).indd 19

05/12/2019 14:36

Arable …from previous page

Winter beans Variety choice of winter beans remains the same, continued Mr Belcher, but having had two very good years in trial, Vespa gains a full recommendation for 2020 and becomes the top yielding variety (108). Other winter beans Bumble, Tundra, Wizard and Honey all remain with a full recommendation. “Beans established well in the autumn and trials looked better than they have for a number of years. Foliar diseases chocolate spot and rust were

seen at higher levels this year. “2019 yields (5.09t/ha) were slightly up on the five-year average of 5.01t/ha and the top-yielding site for the second year was in Herefordshire at 6.27t/ha,” he commented.

Spring beans Nine trials were taken through to harvest and, as with the winter beans, the highest yields came from a site in Herefordshire (6.07t/ha). 2019 trial yields (5.07t/ha) were slightly lower than the 5-year (5.12t/ha) average. Mallory (98) gains a full recommendation for 2020. Yields are 4 per cent lower than Lynx, and downy mildew is good (7), rating the same as Lynx. Macho, LG Raptor, Ghengis and Yukon all gain a provisional P1 recommendation for 2020. Macho and LG Raptor (100) are the highest yielding of these just two per cent behind Lynx, while Ghengis (99) is just one per cent lower. Yukon (92) has relatively lower yields, but has very early maturity (9) and very good downy mildew resistance (8). Macho, LG Raptor and Ghengis all have downy mildew ratings of 4. Victus and Tiffany (both low vicine/convicine types) move from New bean LG Raptor joins the RL.

TB11120 E & P Anglia Machinery Half advert 132x188mm.indd 1

20 www.farmersguide.co.uk January 2020

18-20 PGRO (095).indd 20

P1 to P2 recommendation. Lynx, Fanfare, Vertigo, LG Cartouche, Fuego and Maris Bead all remain fully recommended within their respective categories, concluded Mr Belcher.

Breeder comment Limagrain says that its pulse breeding programme focuses on producing varieties suitable for UK growers with the highest yields and agronomic characteristics that mitigate many of the challenges of the growing season, and its two new varieties reflect this approach, said Limagrain pulse breeder, William Pillinger. The large blue pea LG Aviator joins the Recommended List with a yield of 99 per cent over control, higher yielding than market stalwart, Prophet. He explains that the reason for these high yields is because LG Aviator is a multi-podded variety type. “This means that for each node there are three pods, therefore there are more pods at the top of the plant rather than spread through the plant, making for a more even maturity with less competition for light. Agronomically there is much to like about the variety, he added. “LG Aviator has excellent tolerance to downy mildew with a rating of 7,

and is resistant to powdery mildew. It’s early, and has good ratings for standing ability and straw length (rated 6) – making it one of the best agronomic packages of any other provisionally rated varieties.” When breeding bean varieties, yield is the most important factor he pointed out. “We focus on this, as well as building in more specific traits such as winter hardiness, maturity, plant tillering, water logging and drought tolerance. “LG Raptor’s consistently high yields have played out over the past two years of Recommended List trials, yielding 107 per cent of controls in 2019 and 100 per cent of controls for this year’s listing, and I would expect it to perform as well or better again next year. “Characteristics such as one of the earliest maturing varieties on the RL, short straw and excellent standing power make LG Raptor the best agronomic packages for any spring bean on the market.” LG Raptor is suitable for human consumption, fish feed and animal protein markets, added Mr Pillinger. FG *PGRO Recommended List 2020 Tables can be found at: www.pgro.org/ downloads/PGRO2020RLTABLES.pdf

28/08/2019 12:27

09/12/2019 20:08

Arable

Increased seed choice for sugar beet growers

Prices The agreement does not include the right for KWS to set prices for its products on farm as these will continue to be set by the Seed Working Group. “We would have welcomed the opportunity to decide the price for our pelleted seed to growers as it would not only extend choice but also

promote competition between all parties for the benefit of growers,” points out Mr Bishop.

What accountability and choice mean for the grower KWS says that it would be fully accountable for its own-processed seed once on farm, something not possible under the previous arrangement. This commitment includes extending the KWS Beet Seed Service, a scheme already enjoyed by growers in other European markets, whereby a grower of KWS-processed seed can purchase seed for re-drilling at a reduced price. The agreement with the Seed Working Group relates specifically to KWS’ range of classical varieties, such as Daphna and Sabatina KWS. It does not include the herbicide-tolerant varieties known as Conviso Smart, where traceability, purity and stewardship requirements necessitate that growers have access, through distributors, to the technical expertise KWS has agreed terms to supply its own processed seed to the UK. needed to support the whole rotation. FG Comparative performance of KWS EPD and EPD2.0 processed seed 95 94.5

Adjusted yield (t/ha)

Sugar beet breeder KWS and the joint Seed Working Group of British Sugar and NFU Sugar have reached an agreement that extends the seed offering to growers. The agreement means growers can, for the first time, choose between seed that is processed and pelleted by the breeder or by Germains Seed Technology. KWS sugar beet country manager for the UK, Ben Bishop (below), described the agreement as ‘historic’ as it was the first-time growers had a genuine choice in pelleting technologies. “Thousands of hectares of KWS own-brand seed have been purchased and grown by a limited number of farms over the past two seasons and we are pleased that this choice will now be extended to all growers for drilling in spring 2020. Crucially, growers will be able to express their preference for KWS’ seed technology on their seed order form,” he says. “This choice will support the competitiveness of sugar beet production in the UK and bring benefits to the grower including full breeder accountability for the seed once it is on farm and the opportunity to purchase seed for re-drilling for any reason at 50 per cent of the invoice price. All KWS-processed seed will come with Early Plant Development (EPD), our processing and priming technology already enjoyed by farmers across continental Europe,” he adds. Several years of trials overseen by the BBRO have shown that the KWS pelleting process known as EPD2.0 and the first-generation process, EPD, perform strongly in the UK. “EPD2.0 gave a yield benefit of 1.5t/ha in the trials offering growers the choice of improved seed treatments on KWS seed,” says Mr Bishop.

94 93.5 93 92.5 92

KWS Early Plant Development Industry standard (Xbeet Plus) KWS Early Plant Development (EPD) (EPD2.0)

Mean of 34 treatments comprising 1,224 plots across six locations and spanning three consecutive seasons (2016–2018). Source: BBRO

- Get Back Control • GPS rate control • Stabilised Geometry boom • Wide crop recommendations • Increased control expected on black-grass, rye grasses and bromes

echneat January 2020 www.farmersguide.co.uk 21

21-22 KWS (083).indd 21

08/12/2019 15:46

#2 REASONS TO BUY NOW!

S-SERIES

R E M A R K A B L E C O M B IN E C H A M P I O N

L E S S T H A N 1% B R O K E N K E R N E L S

We are so confident of the T-Series performance that we are challenging owners of equivalent combines to go header to header and beat the T-Series to win ÂŁ10,000*.

We believe the grain quality of the S700 is so good we guarantee you can achieve less than 1% broken grain. If not, weâ&#x20AC;&#x2122;ll pay you the difference in cash for the lost grain*.

AS22733.1ENG_GB

T-SERIES

*Only at participating John Deere dealers. See your dealer for full terms and conditions or visit our combine web page at deere.co.uk/BrokenGrainGuarantee

21-22 KWS (083).inddGuide.indd 22 AS22733_1_Farmers 1

05/12/2019 15:25 24/07/19 16:51

Review

German mega-show continues to inspire Almost 3,000 exhibitors spread across 23 halls – for anyone with an interest in agricultural machinery and technology Agritechnica is the event to visit. David Williams was there. The biennial show in Hanover in early November, takes place over seven days and attracts exhibitors and buyers from around the world. Most stands feature something new, and many European manufacturers use the show to launch new products and innovations. With the growing use of computerisation and data

management by farm businesses, this year’s show theme was connectivity, and most stands featured tractors and machines with a spider’s web of lines symbolising data transfer. A large number of UK farmers attended the 2019 event, and those interviewed by Farmers Guide said they found it particularly useful,

featuring plenty of new products relevant to their farm businesses. There were many show highlights – a selection of which are featured in the following pages – but Krone’s latest innovation allowing forage harvester owners to ‘hire’ extra horsepower for their machines from an online shopping trolley is an example of what might be more widely possible in future (see page 32 for more information). The show’s huge attendance means that getting to and staying in Hanover for the event isn’t

UK-manufactured track system

Loaders updated

Sly Agriculture displayed its IMTS 2W-457 multi-use track system which is manufactured in the UK. “We supply OE and end users,” explained managing director George Sly who is pictured with the track assembly. “There is growing interest in solutions to reduce ground pressure and protect soils, and which also allow field operations such as harvesting to continue when conditions are too wet for tyres.”

New M-series mid-size Bobcat skid-steer loaders were displayed. Five models include three wheeled and two with tracks. The new loaders are the same size as current variants but have updated engines with 37 per cent extra torque, more power and offering quieter operation. Also displayed was a concept quad-tracked skid-steer loader. The track units are made by Bobcat and bolt on in place of the wheels, allowing easy swapping between wheel or track units to suit the application. There is potential for them to be available for any model in the range, depending on demand. Pictured next to the S70 with the new track units is product manager for loaders, Jiri Karmazin.

cheap, and entry tickets for the show itself are pricey. The biennial frequency seems to be part of the show’s success, where exhibitors and visitors are prepared to invest for the future. And, even though current uncertainty regarding the UK agricultural industry means potential buyers are cautious, those who attended will have seen concepts and products likely to become available during the next two years, which could increase profitability and efficiency of their farm operations. FG

January 2020 www.farmersguide.co.uk 23

23-37 Agritechnica (084).indd 23

11/12/2019 10:17

Lemken HP - 68324.pdf

11/12/2019

14:28

ur local Contact yo ealer for LEMKEN D 0 Spring 202 deliveries!

BLUE MEANS VITALITY THE SOLITAIR PNEUMATIC SEED DRILL VERSATILE FOR UNIVERSAL APPLICATIONS

The Solitair pneumatic seed drill combined with the Zirkon power harrow from LEMKEN opens up a wide range of applications for ment options in conservation as well as conventional cultivation procedures. The OptiDisc parallelogram mounted double-disc coulters of the Solitair place the seed precisely at the desired depth.  Dual-Shift or change gear for easy rotor speed adjustment

 Hydraulic working depth adjustment for comfortable work

 Maximum operational reliability with seed or distribution monitoring

 High-precision cross-distribution by seed distributors directly above the coulter bar

69230

lemken.com

The Workshop • Stowbridge Farm • Green End • Stretham • Ely • Cambs • CB6 3LF

SALES

01353 648078 • info@youngs-as.co.uk • youngs-as.co.uk SERVICE

PARTS

REPAIRS

FABRICATION

RESTORATION

24 www.farmersguide.co.uk January 2020

23-37 Agritechnica (084).indd 24

11/12/2019 14:30

Review Comfort and performance

A new high-density large square baler attracted a lot of interest on the Case IH stand. The LB436HD produces bales up to 22 per cent denser than the LB434 XL model which produces the same 120 x 90cm bale size. To handle the high density a brand new knotter was developed. TwinePro is claimed to boost productivity by making tighter knots and uses less twine. Pictured with the new baler, which was awarded one of the Machine of the Year accolades at the event, are (l-r) Case IH dealer Nicholsons Stalham Engineering managing director Tony Nicholson; the dealer’s Case IH specialist Kevin Chubbock; and Case IH product marketing specialist Ross Macdonald “We are excited by the new baler which will suit our customers’ needs,” said Tony. “Getting more straw on each lorry load improves the efficiency of a baling operation and this new baler will also reduce the amount of bale twine used each season.” The dealer took on the Case IH franchise two years ago, and Tony said the move had been very successful with more than 50 new tractors sold to date, and several large square balers.”

Indian tyre manufacturer BKT displayed several new tyres at the event, explaining that developing tyres capable of operation at reduced pressures while also suitable for high-speed road transport tasks has been a recent priority. The V-Flexa tyre is steel-belted for durability and capable of operating at 30 per cent less pressure than a standard tyre. It also offers exceptional load distribution to help protect soils, explained the company. Another new tyre was the FL633 Performa which also has steel belt construction and offers superior performance for field and road use. It is rated for speeds up to 100kph and is currently available only in 600/50R22.5 size. BKT president and director of technology Dilip Vaidya is pictured with a trailer fitted with the V-Flexa tyres and he spoke with Farmers Guide about the addition of rubber tracks into BKT’s tyre equipment line-up. Commercial manufacturing will start this summer following final testing this spring. First customers to benefit from the rubber tracks will be Indian rice growers, and the tracks will be available to end users and OEM. “Quality will be premium,” explained Mr Vaidya, “but our tracks will offer excellent value for the investment. The first size will be 450-90-60, with others added later.”

Upgraded tractor spec

Truck mobility increased

Higher density baler

Latest generation M7003-series tractors were displayed by Kubota for the first time and will replace M7002 models from spring 2020. The new models feature Kubota engines of 130, 150 and 170hp (max) and with 5–20hp boost, and transmission choice includes CVT on KVT variants and powershift. The engines meet Stage 5 emissions regulations, and the efficient engine design and clean operation allow a DPF service life of up to 6,000 hours. New features increasing productivity include variable rate steering in three stages. Powershift models now come with Xpress restart which provides automatic clutch activation when the brake pedal is pressed, improving cycle times and ease of use for tasks such as loader work. Climate control is a new option and there are various LED lighting packs. A broader choice of wheel and tyre options includes new 710/55R38 rears. New for the KVT models is TIM technology which allows control of tractor functions by compatible Isobus-linked implements. “Since introducing the M7000-series tractors we have seen increased demand across the UK,” explained agricultural product manager Luke Sellwood, pictured with the new model. “Sales have been predominantly to mixed farms and have also included fleet orders to vegetable producers attracted by the low running and ownership costs. We offer warranty packages and have an excellent dealer network, with sales and service staff confident in our products and the back-up available. Feedback from users has been very positive regarding the comfort and finish of the latest cabs.”

A Silver Medal for Innovation was awarded to Alliance Tyres for its new 398HS flotation truck tyre. “It’s unique in that it allows trucks to travel on fields while also being suitable for high speed road use,” explained ATG public communications manager Julia Verbunt who is pictured with the Award and the new tyre. “Often when trucks are used to transport produce to the store, tractors and trailers are needed for field transport between the harvester and lorry. Our new tyre is fully agricultural with grip for muddy conditions and it can operate down to just 0.6-bar, reducing compaction and soil damage. With on-board tyre pressure adjustment, the tyres can be re-inflated to 6.5-bar for comfortable road transport at 100kph.”

Oppel wheel option

On the Holmer stand a new Oppel wheel option for Terra Dos T4-30 and T4-40 beet harvesters can replace the standard lifting shares. The company explained that, for most conditions, shares are the preferred lifting system but, in very heavy or very light soils, Oppel wheels can offer advantages.

January 2020 www.farmersguide.co.uk 25

23-37 Agritechnica (084).indd 25

09/12/2019 20:14

Review 4m front mower Road transport width restrictions in the UK mean mower choice is usually limited to models below 3.5m, but Krone has announced a new 4m model fully compatible with UK transport rules. To achieve a 3m transport width the two end cutter units fold back behind the mower. Because they pivot around the vertical drive shaft, blade timing is unaffected. Production for 2020 is very limited, with availability increasing for 2021. “Tractors have become larger and wider, so often 3m mowers don’t even match the overall wheel width, and users fail to achieve maximum benefit from triple sets,” commented James Duggleby (pictured). “With a true 4m cutting width available, the new F400 CV Fold front-mounted mower allows rear units to be moved out to achieve maximum working width, increasing work rates and productivity.”

Optimising pressures Michelin customer engineering support manager for the Nordic countries, Aage Boller is pictured with new Axiobib 2 tyres at the show. “We displayed the first IF tyres in 2007, with the ability to transport the same loads at the same speeds as conventional tyres, but at 20 per cent reduced pressure,” he explained. “Our first VF tyre was launched in 2003, with the ability to reduce pressures by up to 40 per cent and now the VF technology is available in the Axiobib 2, with Ultraflex technology and which will replace the Axiobib.” Also displayed by Michelin was the Zen@Terra Central Tyre Inflation System (CTIS). The customer supplies machine details, tyre dimensions by position and conditions of use, which are then used by Michelin to pre-programme the system for various tasks. The machine operator simply selects a symbol that corresponds to the type of work to be completed, then the Isobus-linked tyre inflation pressure control system sets bespoke optimum tyre pressures for field and road use, and adjusts the tyre inflation pressures accordingly.

Environment and cost benefits New Holland celebrated winning the new Sustainable Tractor of the Year title, which was awarded for the first time. CNH global product manager Mark Howell is pictured with the company’s methane-powered tractor which has been in development for several years and will be available to purchase shortly. Based on a conventional T6 tractor, but with a sparkignition engine replacing the standard diesel unit, the tractor has gas storage tank options to hold enough fuel for a full day’s work. During testing, a 5.9-litre engine similar to that used in Ford EuroCargo trucks provided the power, but production machines will feature a new 6.7-litre power unit producing extra power and torque. “Interest has been from biogas producers as the tractors can be fuelled by gas produced onsite, but also from vegetable growers and municipalities where reduced environmental footprints are valued,” explained Mark. “We have been approached by fleet users where significant cost advantages are available. Even for those prioritising environmental benefits, reducing costs to maximise profits is essential.”

Vineyard and orchard tractor A new model on Valtra’s show stand has extended the line-up from four to five variants. The new F-series is designed for vineyards and orchards and includes models from 75–100hp, starting with an extra-narrow model only 1.3m wide. A heated and airconditioned cab is standard, and wider models are also available with an open cab and ROPS. Height of the open cab version is only 1.4m making it ideal for working under frames and low branches. A 24-speed transmission is standard with mechanical or power shuttle and powershift. Hydraulic supply is 68–100-litres/min depending on model. The new F-series will be available from early 2020.

Cost-effective solution UK-based Agricision provides innovative entry-level GPS guidance products and was promoting latest upgrades, including satellite imagery which enables users to view areas worked in relation to visible field boundaries. “It’s easier to see the work area and coverage, especially for tasks such as establishing game cover,” explained director Adam Keene (pictured far right) with Alan Keene and Natalie Fiquepron, who were assisting on the stand. Future company developments include cloud-based work recordkeeping, allowing data to be shared between authorised users. The new cloud-storage option allows field boundaries, A-B lines and field coverage information to be shared between multiple machines in real-time. “We have over 1,000 users now who appreciate the simple installation, easy swapping between machines and low cost,” said Adam.

26 www.farmersguide.co.uk January 2020

23-37 Agritechnica (084).indd 26

10/12/2019 20:45

20190

PLUS

THIRTY

IMPRESSIVELY VERSATILE. RAISING YOUR STANDARDS.

CT CONTA CAL

LO YOUR R DEALE

Kramer telehandlers 6 m to 9 m stacking height: sturdy, versatile, efficient. Whether it’s the compact all-rounders or the larger ranges maximum capacity’s, all eleven models are made for the versatile tasks found on farms. The telehandlers are characterized by their high level of ergonomics and technical refinement.

Find your local dealer here: www.kramer.de/dealerlocator

20190401_EN_KA_EMENA_AD_FarmersGuide_210x148+3.indd 1 23-37 Agritechnica (084).indd 27

01.04.2019 13:40:25 06/12/2019 14:52

Updated styling Displayed for the first time, the new 5700M-series includes five models from 95–135hp. Massey Ferguson has adopted a new letter designation for its tractors with M representing medium specification and S used for premium variants. The current 57 and 67 Global series tractors will all be designated 57M-series and the new five-model line-up will have a choice of manual or Dyna-4 transmissions, and mechanical or power-shuttle.

Displayed beside the Massey Ferguson Next concept tractor (page 38) were Next-branded 7000 and 5000 S-series models, which are available at no extra charge in black, or red and black colour schemes. “The new styling links the current product line up to future models,” explained national sales manager for tractors and telehandlers, Joe Ford. “Both series are due to be updated; the 7020–7026-models in 2020, and the 5011– 5013 variants later.”

Silver for camera Grimme displayed its latest two-row belt planter with a 3t bunker. The version displayed was a trailed unit, but a linkage-mounted model is available with a smaller bunker. Pictured with the new planter are (l-r) UK sales manager Tom Goose, managing director Graf Grote and export manager Alexander Stark. The new SmartView camera system (inset) was also shown by the company, allowing up to eight pictures to be displayed on a 12in touch-screen. The in-house designed system allows users to zoom in and out within individual images and save settings for permanent display. Slow motion and recording are also possible. Images can be shared by users monitoring performance nearby through the machinegenerated SmartConnect Wi-Fi network. This allows data to be viewed through a smartphone or iPad. SmartView won a Silver Medal at the event.

Farm Business, Fleet & Agri Motor Trade Insurance Specialists

Committed to Service and Price

Connect with us...

@GreenlandsIns Visit

Greenlands Insurance Services Ltd work to provide a friendly and complete brokering facility for agricultural insurance risks. This approach complements a broad range of associated products and services, each of which is tailored to meet the ever-shifting needs of our clients both existing and new.

Greenlands.co.uk

Authorised and regulated by the Financial Conduct Authority

28 www.farmersguide.co.uk January 2020

23-37 Agritechnica (084).indd 28

09/12/2019 20:20

Review Ploughs upgraded

Discs ideal UK-based sprayer manufacturer Landquip added Lozora cultivation products to its machinery line-up last summer, and managing director Richard Abbott explained that the brand’s build quality and design makes it attractive to UK farmers. A collaboration between the manufacturers sees Ukraine-based Lozora manufacturing Landquip sprayers under licence for the Russian market, while Richard’s long-established UK business provides an ideal platform for supplying the Lozora range. “Lozora discs are probably the main products with appeal to professional UK growers, and Ducat models include 5m trailed and 3m mounted versions which we have available for demonstration. The larger Ducat Gold disc harrow is for intense deep cultivation with up to 270kg available from each disc unit to assist penetration,” said Richard. “The 8m version is too wide for UK road transport, but the 6m model is ideal, folding to under 3m. The thorough cultivation means seedbeds can often be created in a single pass, and with superb stubble and trash chopping capability, it’s an ideal tool for maize growers.” Richard said the company also manufactures inter-row cultivators in 6, 9 and 12m working widths. “These are attractive to organic growers using wider row spacing,” he explained. “Later we will add automatic guidance and steering options to broaden their appeal.”

Product updates from Kverneland included a new generation of 2300S and 3300S mounted ploughs, gaining features from the flagship i-Plough range. These include a new Aero-profile leg assembly increasing under beam clearance to 80cm, making them ideal for high trash situations. The leg’s rounded profile has a wider front section tapering to the rear for reduced drag and wear, and the leg is hollow, reducing the weight but making it stronger than before. The body mounting provides a larger clearance between the mouldboard and leg to reduce wear. Kverneland smart skimmer adjustment is provided, through which one adjustment point allows setting of the top and bottom simultaneously. A new frame-mounted depth wheel is available to replace the standard tail wheel, with manual or hydraulic depth adjustment. New bodies have been added, including the ‘38’ which is a deeper version of the ‘28’ body for working down to 38cm, and also provides extra twist for improved soil inversion. The updates are only available currently on auto-reset models – which also gain stronger but lighter springs, with bolt-protected versions due for update later. Semi-mounted ploughs in the 6300 series replace previous PB-series models, are available with 5–8 furrows and also benefit from upgrades including the Aero-profile legs. Pictured on the stand with one of the new 3300S mounted ploughs are Suffolk-based Forrest Farms farm foreman Rob Hale, farmer James Forrest and Kverneland product manager Adam Burtam.

Field Farm Tours Ltd. Tel: 01636 616060 info@fieldfarmtours.co.uk www.fieldfarmtours.co.uk

Costa Rica & Panama

7-20 Jan 20

Tanzania

CONFIRMED

FURTHER TOURS TO... 7-26 Jan 2020 stunning Chile & Argentina

9-20 Feb 20

The people of Costa Rica cherish the country, declaring most of it as National Parks for its protection. Our tour includes the chance to visit 4 of the parks to see the wildlife and the farming. Opportunity to enjoy a 3 night extension to Panama and cruise down the Panama Canal. CONFIRMED

Tanzania has landscapes and wildlife, including the Serengeti, Kilimanjaro and the Tarangire National Park. The great migration of the Wildebeest and their predators following offers the true African wildlife tour. See coffee, fruit, flowers, seeds and livestock en-route.

Mauritius

UAE & Oman Extension 8-19 Mar 20

16 Feb-1 Mar 20

Sold out

New Zealand 15 Jan-31 Jan 2020 Spring Gathering 26-30 Apr 2020 South Africa 6-23 May 2020 Albania & Greece 10-18 May 2020 Japan 18 May-3 Jun 2020 Latvia/Lithuania 31 May-7 Jun 2020 Normandy June 2020 (with David Richardson)

Visit the beautiful island of Mauritius to enjoy technical visits to fruit, research centre, flowers for export and sugarcane. Stay in excellent beach hotels with first class facilities and enjoy the beauty of the island’s scenery and ocean views, whilst taking in the agricultural economy.

UAE has more to offer than sand, camels, skyscrapers and oil wells. Join us to see large dairy units, aqua and hydroponic crops and see the famous Arabian Horse Stud operation. With out standing 4 & 5 star hotels, this promises to be a great tour. Optional extension to Oman.

USA West Coast Canada

16-24 June 2020 24 Jun-7 Jul 2020

USA Mid West Romania

24 Jun-8 Jul 2020 Sep/Oct 2020

Peru

Northern Italy

LAMMA

23 Mar-4 Apr 20

Peru in on the Pacific Ocean between Ecuador and Chile. The tour includes Lima, Cusco, Machu Piccu, a tour across the altiplano of the Andes and Lake Titicaca. Farm visits to tropical fruits, potato production, vegetables, dairy and beef operations.

14-23 Apr 20

Northern Italy offers some of the most attractive cities in the world. The tour includes Milan, Cremona, Bologna and Florence; taking in the Tower of Pisa and ending in Perugia. Farming includes cheese, fruit, wine, olive oil CONFIRMED and milk for skin cream.

(incl Calgary Stampede)

Agricultural Shows & Events Accommodation & travel services (NEC Birmingham)

Dairy Tech (Stoneleigh)

7-8 Jan 20 5 Feb 20

Bull Sales

16-17 Feb 20

Pig & Poultry

12-13 May 20

Grassland & Muck

20-21 May 20

(Stirling)

(Stoneleigh)

(Ragley Hall)

January 2020 www.farmersguide.co.uk 29

23-37 Agritechnica (084).indd 29

09/12/2019 20:23

69259

www.hallwebs.co.uk

TEL: 01845 522990

Hall RS

ENGINEERING

THE UKâ&#x20AC;&#x2122;s No1 WEB MANUFACTURER OVER 40 YEARS EXPERIENCE

ANY MAKE ANY MODEL, WE MAKE IT!

Quality Machinery

WWW.HALLWEBS.CO.UK

Speaks For Itself

69017

enquiries@kingwell-holdings.co.uk

Tel: 01376 550989 www.kingwell-holdings.co.uk

Book the best today

MADE IN SWEDEN

tel: 01892 770788 l mob 07836 274164 email: sales@marshalllogging.co.uk

68565

www.marshalllogging.co.uk www.kingwell-holdings.co.uk

FORESTRY, SITE CLEARANCE & BIOMASS SPECIALISTS

30 www.farmersguide.co.uk January 2020

23-37 Agritechnica (084).indd 30

08/12/2019 18:00

Review New balers

€25,000 challenge Making a surprise appearance on John Deere’s stand was a new flagship combine – the X9. Offering performance over and above the current largest S-series models, all that was revealed at the show was that the combine is a full rotary with twin rotors, and that it can harvest more than 100t/hr with less than one per cent grain loss. It is claimed to have the widest separation channel in the industry but remains within the 3.5m standard combine transport width, whether on wheels or tracks. The cab (inset) is similar to the S-series, but with additional features and a layout design similar to the latest 8R tractor models which were also unveiled on the stand. Harvesting product specialist Carsten Heftrig told Farmers Guide that development has taken more than 10 years, and that the new HDX Draper 45ft header displayed on the front is an ideal match for the X9. The new header was designed for European farms and features a 1.2m deep belt with a patterned surface profile to prevent the loss of escaping small seeds such as oilseed rape. He would not comment on whether larger or smaller versions of the new combine or table would also be available, but when asked about maximum performance he pointed to the latest John Deere challenge, guaranteeing harvesting performance with minimum losses, with a €25,000 reward on offer. The X9 will be available to order from harvest 2020 with deliveries commencing in 2021.

Automatic control Also displayed on Kverneland’s stand was the new Turbo T i-Tiller; available in 6.5–8m versions. Tines are spaced at 19cm, allowing deep cultivations to be carried out effectively with the standard tines or, for extra shallow cultivation, winged tines can be fitted for full-width soil movement. Electronic control of every aspect of operation includes depth, angle and levelling. The weight transfer system operates automatically using wheel sensors for ground pressure monitoring, maintaining constant weight on the tractor rear without lifting the machine out of work. The front drawbar pivots have sensors monitoring respective left- and right-hand draft forces, and if the user turns too tightly with the machine deep in the ground, creating excessive stress and risking damage, the cultivation elements lift automatically out of work. The electronic control provides opportunities for advanced automation including depth control using data from soil compaction maps, allowing issues to be tackled while saving fuel, metal wear, and time. Pictured with the new i-Tiller are arable systems product manager David Holmes and service and product manager Florian Herbreteau.

McHale launched new V6-series balers – the V6-740 and the V6-750 which includes a chopper. The new models feature a revised design including panels which hinge up for improved service access. A five-tine pick-up is standard with six tines an option. A highperformance pump-driven netter is standard. The balers have three belts, and there is also a single belt option. A standard profile bale kicker is provided but a channel bale kicker can be specified. Chopper options for the V6-750 include 15- or 25-knife – with selectable chopping. Marketing executive Eoin Clarke (pictured above) said the new balers will attract professional users looking for a high-end belt baler, producing large numbers of silage or straw bales.

Manufacturer-led data sharing DataConnect was promoted heavily by Claas. A three-way collaboration between Claas, John Deere and 365FarmNet, DataConnect is designed for mixed machinery fleets and is claimed to be the first direct manufacturer cloud-to-cloud data management solution. It is open to all data providers to sign up to, with CNHi (New Holland and Case IH) and Steyr having signed up since its official launch in the summer. Previously, users of different manufacturerdedicated systems had to download data from each manufacturer portal, then load the files into farm management programmes to use it. With the owners’ consent, DataConnect automatically links the different portals and makes the information available through a common interface. Each manufacturer system remains available to use, with all the data stored there, but the new system means information exchange can be achieved in real-time for efficient fleet and business management. As an example, John Deere machines can be seen in Claas’ telematics system and vice versa. Claas UK Easy product manager Edward Miller (pictured) explained that initially only task information will be available (machine tracks, working status, fuel tank level), and for specific machine records including service requirements and fuel consumption data, users will still need to log into the specific manufacturer portal. However, additional features will be added to provide an almost total solution in time. “DataConnect simplifies things for users, providing what has been needed for some time – all the data available in one place of the customer’s choosing,” he added. Claas also announced a direct link between its telematics platform and MySOYL and Omnia farm management packages. This, when enabled by the user, will automatically transfer task data created by telematics to the connected package. Connections to other farm management packages will follow. Other news on the stand included a tracked Xerion option. Using Zuidberg track units, the Xerion TS is supplied from the factory track-ready, including a modified frame and chassis arrangement. Other news regarding the Xerion line-up includes a new Xerion 4200 replacing the previous base 4000 model, with 462hp which is 27hp up on the previous model. Latest 4500 and 5000 models both gain additional torque.

January 2020 www.farmersguide.co.uk 31

23-37 Agritechnica (084).indd 31

10/12/2019 20:47

Horses for hire Krone BigX forage harvester updates include steering by joystick. The current multi-function joystick on the right retains its existing functions, but on the left armrest a smaller dedicated steering joystick can be specified for field use. No date for availability was specified. Also new for Big X harvesters equipped with a SmartConnect Box – standard on all current models – is the availability of additional performance and economy functions through the company’s website. The owner simply logs in to the Krone portal, selects his machine and then a menu of available functions is displayed, with prices. Those wanted are placed in the shopping trolley and the user checks out, then the new functions are sent to the machine wirelessly. Those available online include Constant Power, Xtra Power and Power Split, along with fuel consumption mapping. For other implements such as mowers and rakes, section control can be selected and purchased. One intriguing opportunity for owners of BigX 680 models is the ability to rent an additional 50 or 100hp to equal the output of a BigX 780. Both share the same engine, and the user simply selects and pays for the upgraded hours needed. The purchased hours are only used when additional power is selected, so for lighter work or transport, there is no extra operating cost.

Sprayer for the UK The first showing of Lemken’s Nova 14 self-propelled sprayer created plenty of interest. Designed from a clean sheet, the new sprayer is ideally suited to UK farms and the views of many potential users were obtained during initial market research, explained Lemken UK general sales manager Paul Creasy (pictured). The Nova 14 has a Deutz 245hp engine and hydrostatic drive through Poclain wheel motors on height- and width-adjustable axles. Maximum travel speed is 50kph. The heavy-duty running gear means the sprayer is rated for towed loads up to 16t. Tank volumes are 4,800 or 7,200 litres and boom widths are 24–39m. The aluminum booms are manufactured for Lemken by Pommier and the widest 39m version weighs in at under 1t. Control is through CCI800 or CCI1200 terminals and Agrirouter software enables wireless data transfer between the sprayer and farm office, and to authorised third parties. The Nova 14 is the only self-propelled sprayer with a Krone-sourced cab and offers exceptional comfort, explained Paul, adding that large farm sprayers often accumulate more annual working hours than combine harvesters or forage harvesters. One Nova 14 sprayer will arrive in the UK in summer 2020, and is already ordered, and there will be limited availability for 2021 with full production from later that year.

Visit the NEW CLAAS EASTERN website and find our exstensive LEMKEN content including videos, information and quick access data.

www.claas-eastern.co.uk Contact your local EASTERN branch to book your demo today.

EASTERN Brigg 01652 651810 EASTERN Catfoss 01964 545300

EASTERN Markham Moor 01777 838888 EASTERN Sinderby 01845 567407

www.claas-eastern.co.uk

EASTERN Sleaford 01529 303093 EASTERN Ulceby Cross 01507 462288

EASTERN Wilberfoss 01759 388811 A WOODS 01406 426108

facebook.com/CLAASEastern

CLAAS EASTERN 23-37 Agritechnica (084).indd 32

09/12/2019 20:28

Review On-board tyre inflation system

Controls upgraded Ropaâ&#x20AC;&#x2122;s new Tiger 6S sugar beet harvester is completing testing this season and will be available for harvest 2020. The main update is a new cab layout with two 12in displays feeding information to the operator and a new control panel layout with interactive touch-pad buttons. Digital cameras are standard, providing superior image quality for monitoring performance. Joystick control buttons on the right armrest are programmable, and on the left armrest a dedicated joystick is for unloading. The R-Soil Protect hydraulic chassis has slope and roll stabilisation, and a new three-axis gyroscope improves angle monitoring for precise adjustment.

New tine design for heavy-duty harrow An all-new heavy-duty tine harrow was launched by Vaderstad. The NZ Extreme is available in 12.5 and 14.5m working widths and capable of creating an ideal seedbed with high work rates, explained the company. New tines have been developed to break up resistant clods with a durable rigid construction and intense vibrating action. A five-section frame provides excellent ground contour following and the harrow incorporates an innovative weight transfer system to optimise traction.

Trelleborg launched its CTIS+ on-board tyre inflation system. Also displayed on the Massey Ferguson Next concept tractor (see page 38), CTIS+ inflates the tyres to recommended pressures suggested through the TLC app load calculator, explained Joscheba Schnetter (pictured). The user sets the tyre size and machine details, and sensors constantly monitor tyre performance and compare pressures to those recommended by the app, displaying the results on an in-cab controller. A clever feature is that no external pipework is needed as air is supplied to the tyres through a hub-mounted rotary manifold with a specially designed seal. CTIS+ is available for OE supply only, and will be available from summer 2020.

Combine Challenge Win ÂŁ10,000 For the past two years John Deere T-Series has been the champion of the Combine Challenge against all other manufacturers. In numerous countries across Europe the T-Series has been header to header with the equivalent competitor in the same crop... same field... same conditions.

Undefeated!

Contact your local Ben Burgess sales representative or Rupert Greest on 07771 660 234 for more information January 2020 www.farmersguide.co.uk 33

23-37 Agritechnica (084).indd 33

09/12/2019 20:29

Review Reliable power

Innovative handler

Perkins launched a new engine at the event. The 2.2-litre power unit fills a gap in the Syncro range, increasing the line-up to two tractor engine models and two industrial models from 1.7–3.6-litre capacity. Syncro engine product marketing manager Alex Eden explained that there is already a lead manufacturer lined up for OE supply of the new power unit. “It’s for frameless tractors, includes a structural sump and the crankcase has a waisted profile allowing space for a tight steering lock. T turbo and TA turbo with aftercooling versions will be available, offering power output between 35–55kW. Also announced by Perkins was news of aftermarket developments. Marketing manager Siobhan Scott, pictured with Alex and the new Syncro 2.2-litre engine, explained that the current tough financial climate means many farmers carry out basic maintenance on the farm, and the company’s SmartCap and new MyEngine app can help them achieve this. “Fitting a SmartCap just requires replacing the oil filler cap, then the SmartCap monitors vibrations and records the data, allowing users to see on the app when servicing is needed,” she said. “It’s also possible to allow third parties to access the data, including trusted service engineers so they can see what is needed and when. Ad-hoc entries can be added including when parts are replaced or if issues occur, for a full engine service history. Recent additions include service, maintenance and workshop manuals for specific engine models through the app, including parts selection and ordering for supply through the preferred dealer. Because the app is constantly updated the latest parts information is shown, avoiding errors which could result in extra downtime.” The app covers all engines with Tier 3 exhaust emissions and below, while manuals for later engines are available through dealers due to the advanced technology included. A SmartCap costs just £40.

An all-new telehandler was launched by Fendt, filling a gap in its product line-up. The first model to become available includes a typical Fendt high specification with 5.5t lift capacity, maximum 8.5m lift height and a unique lifting cab for significantly improved vision for tasks such as loading trailers and hoppers. The cab lifts to 4.25m, and a continuous front screen with no dashboard allows a clear view from the floor to the attachment. Power is from a 164hp engine and Z-kinematics provide huge break-out force for bucket work. The new Cargo T955 handler will be available in mid-2020.

Seventy per cent drift reduction New innovations on the Trimble stand included MagGrow, which has become a Trimble select partner. Its products are available through the Trimble Vantage dealer network in the UK. MagGrow sounds too good to be true – improving spray application coverage and chemical efficacy without additional chemicals or new nozzle technology, but trials over five years have demonstrated benefits including 20–50 per cent increased plant coverage, up to 50 per cent reduced water use, and up to 70 per cent reduced spray drift. MagGrow is a pack of eight manifolds made up of magnetic rods through which the spray fluid passes on its way to the boom. The extremely powerful magnets alter the liquid’s physical properties so that it covers and sticks to plants. No maintenance is needed, and apart from adding the magnet pack into the spray supply line, there is no change needed to sprayers. Pictured holding one of the magnetic manifolds are MagGrow head of sales support Brian Gorham and branded marketing manager Jemma Burke.

Simple task management “FendtOne is a farm management tool which will benefit users by combining the off- and on-board worlds,” explained digital product manager Kathrin Schmidt (pictured right). “It allows data to be presented on smartphones, tablets or in the farm office in a similar form to the way it appears in the tractor cab including format, colour and symbols.” Kathrin demonstrated the ease with which tasks can be created and sent to the machine. First the user selects the tractor, the implement and operator, and then the field, after which task details are checked and then sent wirelessly to the machine. Intelligent filtering reduces selection options, saving scrolling through large fleets of equipment. A report is automatically generated on task completion. Any Fendt tractor with VarioDoc can use the system. Above, a stand visitor is guided thorugh the FendtOne system set-up at the show.

Trailed sprayers Vicon sales manager David Furber is pictured with the new iXtrack T6 trailed sprayer which was launched at Agritechnica. The T6 was developed in response to customer demand for a high-capacity trailed sprayer for use with 50kph tractors. It is designed for optimum transport performance and safety. The T6 has a 7,600-litre tank and is available with booms up to 40m, although 36m is likely to be most popular with UK growers, he explained. The large tank’s low centre of gravity maximises stability, but maintains exceptional ground clearance, added David. Pipework and controls are designed to ensure the tank fully empties for minimum residual liquid, and the sprayer is fully Isobus-compatible. Individual nozzle control with electronic switching is provided, allowing the boom configuration to be adjusted easily to suit multiple tramline spacings.

34 www.farmersguide.co.uk January 2020

23-37 Agritechnica (084).indd 34

E 0 E 0

09/12/2019 20:36

www.samson-agro.com/75

If you own these...

With 75 yearsâ&#x20AC;&#x2122; experience providing our customers robust and reliable technology, we aim to strengthen profitability in your business. SAMSON Spreaders and Tankers offer the best fertilizer solutions, enabling you to not only optimise production, but also comply with environmental law.

...you need the reliability of SAMSON

Contact your local EASTERN dealer branch to find out the benefits of owning a SAMSON machine and how we can bring your running costs down.

EASTERN Brigg 01652 651810 EASTERN Catfoss 01964 545300

EASTERN Markham Moor 01777 838888 EASTERN Sinderby 01845 567407

EASTERN Sleaford 01529 303093 EASTERN Ulceby Cross 01507 462288

EASTERN Wilberfoss 01759 388811 www.claas-eastern.co.uk facebook.com/CLAASEastern

CLAAS EASTERN 23-37 Agritechnica (084).indd 35

06/12/2019 14:43

69075

AGRICULTURAL SEATING The Green, Stalham, Norwich NR12 9QG

NEW Case IH tractors in stock Demos available •Case Puma 175 •Case Puma 240

Telephone: 01692 580513

Kevin Chubbock

TREAT YOURSELF TO A NEW SEAT!

07887 478530

David Nicholson

07885 269499

Tony Nicholson

07770 811950

EMAIL: agsales@stalhameng.co.uk

UnitedSeats have the answer for all makes of classic or modern tractor or telescopic handler

ROTOR BALANCING & VIBRATION ANALYSIS

For details of your nearest stockist:

No need to remove rotors or shaft! Reducing labour & down time!!

info@unitedseats.com or ring 01604 - 300014

For further information and UNITEDSEATS.COM

a competitive price, call us on

01205 480460

Head Office: Medlam Yard, Medlam Lane, Carrington, Boston, Lincs. PE22 7LU. England Tel: 01205 480460 Fax: 01205 481394

UNITEDSEATS.COM Off road seating manufacturer

63273

Southern Lincs Depot: Wigtoft Road, Sutterton, Boston, Lincs. PE20 2EL Tel: 01205 460600 Fax: 01205 461268

www.irelandsfarmmachinery.co.uk

OUR SERVICES

We pride ourselves on our ability to react to even the most detailed of client requirements SUPPORTING BRITISH FARMERS

Guaranteed delivery within 30 days!

We manufacture, supply & build... • Workshops • Grain Stores • Industrial Units • Straw Stores • Bespoke Designs

68593

36 www.farmersguide.co.uk January 2020

23-37 Agritechnica (084).indd 36

09/12/2019 20:38

Review Flagship baler-wrapper

Slurry solution

Pottinger launched its Impress baler-wrapper combinations two years ago, and a new flagship Impress 185VC Pro model was displayed at the show. A variable chamber makes bales between 0.9–1.85m in diameter, and a wide 2.3m pick-up is designed for large swaths. Central pick-up suspension allows more than 120mm movement for excellent ground following. An overhead rotor optimises crop flow and the spiral rotor configuration ensures even feeding across the bale width for constant density. Theoretical chop length is 36mm. The bale wrapper has base-mounted arms which maintain a low centre of gravity. The company explained that the new balers will suit larger farms and contractors and are available for this season.

With slurry application regulations likely to impact heavily on those currently using traditional splash-plates, Fliegl Agro-Center is offering a low-cost entry-level trailing shoe system for existing machines. “Many older tankers won’t take the weight of rear attachments currently available, particularly where UK working conditions tend to be hard on machines,” explained Fliegl sales manager for the UK and Ireland, Nick Dale. “Our new trailing shoe applicator uses our patented distributor through which slurry is supplied into a stainless-steel trough containing a large auger. This controls application and removes foreign objects before they enter the distributor pipework.” Nick said the new applicator is available for almost any slurry tanker and can be mounted on support frames manufactured on-farm or by dealers. Pictured with Nick on the stand with the new low-cost trailing shoe slurry applicator is Fliegl Agro-Center managing director Angelika Fliegl. Also new in the Fliegl Agro-Center display area were push brushes. Nick explained that powered rotary brushes have been offered for some time, but strong demand for push brushes persuaded the company to add them to its line-up, and the new range includes several unique features. Front attachments for the brushes include a front scoop for moving solid materials, and a dozer blade. Brush pressure control is through sidemounted ‘height regulators’ which maintain the desired bristle working pressure, reducing unnecessary wear. Also displayed by Fliegl were a new manure spreader with horizontal beaters and spreader discs fed by a chain and slat system resulting from Fliegl’s takeover of the Brochard business earlier this year,. A new track-mounted chaser bin (above) also made its debut.

Improved accuracy New products from Maschio, imported by Opico, include a high-speed precision drill with particular appeal for maize growers. Chrono metering units use a vacuum to secure seed to the metering disc and the design includes angled discs for unobstructed dropping of seeds down the vertical delivery chute. An air blast accelerates seeds down the chute for immediate delivery and precise plant spacing. The new metering disc motor is fully sealed against moisture and dust and can be pressure washed. To compensate for seed size and density, air pressure can be adjusted between 15–400mb. Each seeding unit has air bag suspension and full Isobus control is standard. Product specialist Alessandro Cazzin (inset) explained that, at all drilling speeds, the accuracy has proved excellent, although most users opt for 15–17kph for a comfortable ride. The new seeding units can be ordered now for delivery in early 2020.

N E P O W O N – T NEW DEPO LTD

Unit 8 • Tattershall Way • Fairfield Ind Estate • Louth • LN11 0YZ

68921

Tel 01507 354200

www.agriscope.co.uk

January 2020 www.farmersguide.co.uk 37

23-37 Agritechnica (084).indd 37

09/12/2019 20:39

Review

Machines of the future Showcasing future farming technology, the concept tractors and other machinery displayed at this year’s Agritechnica seem primarily focused on the use of alternative fuels in agriculture, along with sensors, cameras and drone tech to allow for realtime data analysis during field operations.

Swath merger For farmers and contractors harvesting large areas of grass and other sensitive crops, a selfpropelled swath merger from Ploeger is now available. Benefits over rakes and tedders include reduced crop contamination and higher working speed. Two 5.5m rotor pick-up reels feed crop onto two conveyors and delivery options include delivering the full crop to the centre, or to both sides. A list price of approximately £230,000 was quoted at the event.

Harvester update

Hybrid development Several concept tractors were displayed including a Steyr hybrid in the CNH area, pictured below. Power is from a 4-cylinder FPT engine developing 204hp (150kW), which powers an on-board generator to produce electrical power to drive individual wheel motors and the PTO. A 30kWh battery accumulates power when there is surplus, storing it to release when extra grunt is needed, and up to 250kW peak power is available. The tractor is designed to work with a drone which can gather, process and relay real-time field data.

is also available, with a less powerful 44kW/60hp motor and offering 2wd.

Integrated technology The new Puma 4.0 potato harvester was displayed by AVR. It’s similar to the Puma 3, said export sales manager Tom Lootens (above), but the specification includes AVR Connect which is part of the company’s Smart Farming System. Real-time yield measurement for use with field mapping software is available plus fuel consumption mapping for accurate cost analysis. New features include electric adjustment of the haulm rollers from the cab.

Electric power On the Merlo stand a concept electric telehandler was shown. The E-Worker 25.5-90 4wd has 2,500kg lift capacity and up to 4.8m lift height. The batterypowered motor is rated at 66kW or 90hp. A similar 25.5-60 model

In the Agco display area, a new concept tractor from Massey Ferguson proved a star attraction (pictured right). In white, the MF Next tractor includes futuristic technology, but also gives an indication of some of the design features of new tractors due to be launched later in 2020, replacing current 7720–7726 models. The larger four-post cab is straight from the new tractors, but the display concept tractor had blanked out windows obscuring the new interior. Autonomous

and part-autonomous operation on highway and in the field is a possibility and the tractor is fully equipped with integrated technology, including sensors and cameras, allowing crop and field scanning for real-time monitoring and decision making. The new cab has no external mirrors, instead using night-vision cameras to provide images inside the cab. A heads-up windscreen display is used to monitor performance and means a conventional dashboard isn’t needed. Also new on the concept tractor is steering technology similar to the new Ideal 10 combine where the steering wheel is replaced by a steering joystick, for an uncluttered view to the front. Trelleborg has supplied new carbon-free tyres for the Next tractor, with built-in CTIS+ Inside integrated pressure control, which constantly adjusts for changing operating conditions. It’s not yet clear whether the new 7000-series tractors will bear the Next branding on their release, but it is clear that a major step forward in technology will be available over current models.

Getting to the ‘Root of the Problem’ Back to Basics

Range: 1.5m 3m 4.8m

Using our non-inversion, on-inversion, low disturbance tillage system info@remac.org • RemacSystem.com em.ccom • 07860 4 em. 496618 96618

69183

NEW 6m!

38 www.farmersguide.co.uk January 2020

23-37 Agritechnica (084).indd 38

09/12/2019 20:39

FREE 508 PAGE

INDUSTRIAL AIR COMPRESSORS

Top quality belt driven air compressors for industrial & commercial users inc; garages, factories, workshops and farms. 10 bar/150psi max working pressure

CATALOGUE GET YOUR FREE COPY!

FROM ONLY HEADER

.00 399EXC.VAT £ .80 FOOTER 478INC.VAT £

64SUPERSTORES NATIONWIDE

IN-STORE PHONE 0844 880 1265 ONLINE www.machinemart.co.uk

WHERE QUALITY COSTS LESS Quality machines from Britain’s leading supplier See online for included AIR DISP. MOTOR AIR EXC. INC accessories MODEL cfm (HP) RECEIVER VAT .VAT GAS, TIPS, SHROUDS & WIRE IN STOCK XEV11/100(OL)†* 9 2 100ltr £399.00 £478.80 FROM ONLY XEV16/100†* 14 3 100ltr £425.00 £510.00 .99 135TE XEV16/150†* 14 3 150ltr £459.00 £550.80 £194EX.VAT .99 XEV16/200(OL)†* 14 3 200ltr £525.00 £630.00 £ 233INC.VAT XEV16/150(400V)†14 3 150ltr £535.00 £642.00 MIN-MAX AMPS EXC.VAT XE18/200 (OL)* 18 4 200ltr £579.00 £694.80 MODEL 24-90 £194.99 XET19/200 (OL)* 18 4 200ltr £619.00 £742.80 PRO90 30-100 £229.98 XEV26/200† 23 5.5 200ltr £739.00 £886.80 110E 30-130 £249.98 XE37/270 (OL)* 36 2x 4 270ltr £1169.00 £1402.80 135TE Turbo 151TE Turbo 30-150 £289.00 £449.00 TURBO AIR COMPRESSORS 175TECM Turbo 30-170 205TE Turbo 30-185 £489.00

BATTERY CHARGERS/ ENGINE STARTERS

INC.VAT £233.99 £275.98 £299.98 £346.80 £538.80 £586.80

26EXC.VAT .39 FOOTER 32 INC.VAT

£ HEADER .99

NEW

WORKSHOP AIR TOOLS

89EXC.VAT .98 107INC.VAT .98

Superb range ideal for DIY, hobby & semi 8/260 -professional use CFM TANK EXC.VAT INC.VAT 7 24ltr £89.98 £107.98 7 24ltr £94.99 £113.99 9.3 24ltr £109.98 £131.98 7 50ltr £119.98 £143.98 9.3 50ltr £139.98 £167.98 14.5 100ltr £259.98 £311.98

Great for fast easy hole boring - ideal for fence/ gate posts

FROM ONLY

.00 149EX.VAT .80 178INC.VAT

£ £

EXTENSION AUGER PIECES FOR ED160A IN STOCK

MODEL

MAX AUGER EXC. INC.VAT VAT DEPTH / WIDTH CEA150 Electric 560mm / £149.00 £178.80 150mm ED160A Petrol up to 1.6m £349.00 £418.80 NEW / 250mm

FARM JACKS

CFJ48

.99 54EXC.VAT £ .99 65INC.VAT £

BEST

SELLER

18V BRUSHLESS CIR18LIC 1/2" IMPACT 450NM WRENCHES 3 forward and reverse gears

FROM ONLY

114EX.VAT .99 137INC.VAT

.99

MODEL DESC. CIR18LIC 2x 2.0Ah Li-Ion CIR18LI 2x 4.0Ah Li-Ion

BEST

SELLER

HUGE CHOICE IN-STORE/ONLINE

GENERATORS

FROM ONLY

99EX.VAT £ .98 119INC.VAT £

PG3800

EXC.VAT INC.VAT £114.99 £137.99 £169.98 £203.98

MODEL G720 G1200 PG2500 PG3800 PG3800DV PG6500DVES

KVA 0.7 1.1 2.2 3 3 5.5

HP 6.5 7 7 13

EXC.VAT INC.VAT £99.98 £119.98 £159.98 £191.98 £179.98 £215.98 £239.98 £287.98 £269.00 £322.80 £499.00 £598.80

DRILL PRESSES

• Range of precision bench & floor presses for enthusiast, engineering & industrial applications B = Bench mounted F CDP152B = Floor standing MOTOR (W) EXC. INC. MODEL SPEEDS VAT VAT CDP5EB 350 / 5 £69.98 £83.98 CDP102B 350 / 5 £79.98 £95.98 FROM ONLY .98 CDP152B 450 / 12 £149.98 £179.98 £69EXC.VAT CDP202B 450 / 16 £189.00 £226.80 £ .98 83 INC.VAT CDP10B 370 / 12 £199.98 £239.98 CDP352F 550 / 16 £229.00 £274.80 CDP452B 550 / 16 £239.00 £286.80 CDP502F 1100 / 12 £549.00 £658.80

5 TONNE FORKLIFT/TRACTOR JACK - CFT5B ONLY

.98 LOW HIGH 169EX.VAT LIFTS LIFTS £ .98 FROM UPTO 203INC.VAT 70mm 730mm £

HUGE RANGE OF JACKS IN STOCK

179EXC.VAT .98 215INC.VAT .98

FROM ONLY HEADER

GARAGES/WORKSHOPS

.00 229EXC.VAT £ .80 FOOTERINC.VAT 274

IDEAL ALL-WEATHER PROTECTION

VISIT YOUR LOCAL SUPERSTORE

29379

EXC. VAT £64.99 £69.98 £72.99 £79.98 £139.98 £159.98 £179.98

EXETER 16 Trusham Rd. EX2 8QG 01392 256 744 GATESHEAD 50 Lobley Hill Rd. NE8 4YJ 0191 493 2520 GLASGOW 280 Gt Western Rd. G4 9EJ 0141 332 9231 GLOUCESTER 221A Barton St. GL1 4HY 01452 417 948 GRIMSBY ELLIS WAY, DN32 9BD 01472 354435 HULL 8-10 Holderness Rd. HU9 1EG 01482 223161 ILFORD 746-748 Eastern Ave. IG2 7HU 0208 518 4286 IPSWICH Unit 1 Ipswich Trade Centre, Commercial Road 01473 221253 LEEDS 227-229 Kirkstall Rd. LS4 2AS 0113 231 0400 LEICESTER 69 Melton Rd. LE4 6PN 0116 261 0688 LINCOLN Unit 5. The Pelham Centre. LN5 8HG 01522 543 036 LIVERPOOL 80-88 London Rd. L3 5NF 0151 709 4484 LONDON CATFORD 289/291 Southend Lane SE6 3RS 0208 695 5684 LONDON 6 Kendal Parade, Edmonton N18 020 8803 0861 LONDON 503-507 Lea Bridge Rd. Leyton, E10 020 8558 8284 LUTON Unit 1, 326 Dunstable Rd, Luton LU4 8JS 01582 728 063 MAIDSTONE 57 Upper Stone St. ME15 6HE 01622 769 572 MANCHESTER ALTRINCHAM 71 Manchester Rd. Altrincham 0161 9412 666 MANCHESTER CENTRAL 209 Bury New Road M8 8DU 0161 241 1851 MANCHESTER OPENSHAW Unit 5, Tower Mill, Ashton Old Rd 0161 223 8376 MANSFIELD 169 Chesterfield Rd. South 01623 622160 MIDDLESBROUGH Mandale Triangle, Thornaby 01642 677881

INC. VAT £77.99 £83.98 £87.59 £95.98 £167.98 £191.98 £215.98

HEAVY DUTY PETROL POWER WASHERS CAN DRAW OWN WATER

PROPANE GAS FIRED

FROM ONLY

INC. VAT £95.98 £119.98 £167.98 £203.98 £310.80 £514.80

DIESEL/PARAFFIN HEATERS

.00 189EXC.VAT .80 226INC.VAT

FROM ONLY

Ideal for fast efficient heating Extra-long run fuel tanks – up to 53 litres Variable heat output with thermostat control MODEL MAX OUTPUT EXC.VAT XR60 14.7kW £189.00 XR80 20.5kW £239.00 XR110 29.3kW £289.00 XR160 46.9kW £349.00 XR210 61.5kW £399.00

Delivery & Suction hose in stock

XR80 INC.VAT £226.80 £286.80 £346.80 £418.80 £478.80

PETROL/DIESEL WATER PUMPS

FROM ONLY

.98 149EXC.VAT .98 179INC.VAT

£ £

Honda & Diesel engine models in stock PLS195 *Diesel PRESSURE ENGINE EXC. INC. #Can pump MODEL BAR/PSI HP VAT VAT semi-trash solids Tiger1800 110/1595 2.6 £229.00 £274.80 up to 15mm dia. DW50 Tiger2600 170/2465 4 £289.00 £346.80 ^Can pump trash solids up to 28mm dia. Tiger3000 200/2900 6.5 £349.00 £418.80 MODEL MAX MAX OUTLET EXC. INC. PLS195 186/2698 6.5 £439.00 £526.80 FLOW HEAD SIZE VAT VAT PLS265 260/3770 13 £669.00 £802.80 PW50 550L/min 30m 2" £149.98 £179.98 PW3 800L/min 30m 3" £199.98 £239.98 PS75* 750L/min 23m 3" £239.98 £287.98 PF75# 1300L/min 28m 3" £319.00 £382.80 DIESEL HOT DW50† 450L/min 27m 2" £359.00 £430.80 WASHER DW75† 750L/min 30m 3" £439.00 £526.80 HARRY HOTWASH Ideal for effective SUBMERSIBLE cleaning of vehicles WATER PUMPS CAT117 with a hot jet of • Auto ON/OFF PSV1A up to 80°C float switch .00 229EXC.VAT .80 274INC.VAT

2103 psi

Ideal for use as a garage/workshop Extra tough triple layer weatherproof cover Heavy duty powder coated steel tubing Ratchet tight tensioning ZIP CLOSE DOOR *was £346.80 inc. VAT MODEL SIZE (LxWxH) EXC.VAT INC.VAT CIG81015 4.5 x 3 x 2.4M £229.00 £274.80 CIG81020* 6.1 x 3 x 2.4M £279.00 £334.80 CIG81216 4.8 x 3.7 x 2.5M £279.00 £334.80 CIG81220 6.1 x 3.7 x 2.5M £349.00 £418.80 CIG81224 7.3 x 3.7 x 2.5M £419.00 £502.80

.98 79EXC.VAT .98 95INC.VAT

.99

145 Bar

BRIGHT WHITE LENGTH INTERIOR UP TO 24'

FROM ONLY

MAX EXC. MODEL OUTPUT KW VAT Little Devil II 10.3 £79.98 Devil 700 15 £99.98 Devil 900 24.9 £139.98 Devil 1600 36.6 £169.98 Devil 2100 49.8 £259.00 Devil 4000 131 £429.00

JUMP STARTS

MAX WEIGHT EXC. INC. MODEL OUTPUT KG VAT VAT IG950B 800W 9.3 £179.98 £215.98 IG1200B 1100W 12.4 £249.98 £299.98 35 £329.00 £394.80 IG3500F 3400W IG2000B* 1800W 19.4 £329.00 £394.80 IG2200# 2200W 26.6 £379.00 £454.80 *was £419.98 inc. VAT #was £466.80 inc. VAT

£59.98 £71.98 £83.98 £101.99 £130.80 £202.80 £239.98

64EX.VAT

110

VOLT IN STOCK FROM £226.80

INC.VAT

Provides essential home, garage and roadside assistance Integral work light 910 /JS1100C include air compressor Long life battery

GENERATORS

IG1200B

230&

VOLTAGE HEAT EXC.VAT OUTPUT KW DEVIL 6003 230V 1.5-3 £49.98 DEVIL 7003 230V 3 £59.98 DEVIL 6005 400V 2.5-5 £69.98 DEVIL 7005 400V 5 £84.99 DEVIL 6009 400V 4.5-9 £109.00 DEVIL 6015 400V 5-10-15 £169.00 DEVIL 7015 400V 15 £199.98

BARNSLEY Pontefract Rd, Barnsley, S71 1EZ 01226 732297 B’HAM GREAT BARR 4 Birmingham Rd. 0121 358 7977 B’HAM HAY MILLS 1152 Coventry Rd, Hay Mills 0121 7713433 BOLTON 1 Thynne St. BL3 6BD 01204 365799 BRADFORD 105-107 Manningham Lane. BD1 3BN 01274 390962 BRIGHTON 123 Lewes Rd, BN2 3QB 01273 915999 BRISTOL 1-3 Church Rd, Lawrence Hill. BS5 9JJ 0117 935 1060 BURTON UPON TRENT 12a Lichfield St. DE14 3QZ 01283 564 708 CAMBRIDGE 181-183 Histon Road, Cambridge. CB4 3HL 01223 322675 CARDIFF 44-46 City Rd. CF24 3DN 029 2046 5424 CARLISLE 85 London Rd. CA1 2LG 01228 591666 CHELTENHAM 84 Fairview Road. GL52 2EH 01242 514 402 CHESTER 43-45 St. James Street. CH1 3EY 01244 311258 COLCHESTER 4 North Station Rd. CO1 1RE 01206 762831 COVENTRY Bishop St. CV1 1HT 024 7622 4227 CROYDON 423-427 Brighton Rd, Sth Croydon 020 8763 0640 DARLINGTON 214 Northgate. DL1 1RB 01325 380 841 DEAL (KENT) 182-186 High St. CT14 6BQ 01304 373 434 DERBY Derwent St. DE1 2ED 01332 290 931 DONCASTER Wheatley Hall Road 01302 245 999 DUNDEE 24-26 Trades Lane. DD1 3ET 01382 225 140 EDINBURGH 163-171 Piersfield Terrace 0131 659 5919

.98 49EXC.VAT £ .98 59INC.VAT £

MODEL

TURBO FAN GAS HEATERS

DUAL VOLTAGE

FROM ONLY

DEVIL 7003

Produces sine wave & stable power, essential for computers & sensitive equipment Low noise 12V battery charging Up to 7 hours run time on 3/4 load 4 stroke engine FROM ONLY

Honda engine models available

Offering low cost, efficient heating

DEVIL 6003

SELLER

Ideal £ .99 77INC.VAT for starting EXTRA LONG 1m LEADS FROM ONLY cars, £ .98 STARTING PEAK 49EX.VAT charging £ .98 phones, etc. MODEL BOOST AMPS 59INC.VAT JSM200 900 400 900 MODEL START PEAK JS1100 500 1100 BOOST BOOST EXC.VAT INC.VAT 910 400 900 JSM200 200A 400A £49.98 £59.98 JS1100C 500 1100 JSM300 300A 500A £64.99 £77.99 4000 700 1500 JSM350 350A 500A £84.99 £101.99 JS12/24 1000 2000 JS12/24Li 600 1200 INVERTER

.98

CHECK FRAME TYPE WHEN ORDERING

ELECTRIC/ PETROL EARTH BORERS

• Min. height: 100mm • Max working height: 1090mm

64EXC.VAT .99 FOOTER 77 INC.VAT

£ HEADER .99

ELECTRIC HEATERS

FROM ONLY

MICRO JUMP STARTS

FROM ONLY £

BEST

FROM ONLY Ammeter £ .99 Multi-position 64EX.VAT charge regulator £ .99 77 INC.VAT Overload protection on charging cycle *was £191.98 inc. VAT #was £286.80 inc. VAT MODEL MAX AMPS CHARGE/BOOST EXC.VAT INC.VAT BC130C 15/120 £64.99 £77.99 BC190 38/180 £94.99 £113.99 BC210C 25/200 £119.98 £143.98 BC410E 35/400 £139.98 £167.98 WBC180 35/180 £139.98 £167.98 WBC240* 45/240 £154.98 £185.98 BC205N 30/200 £179.98 £215.98 WBC400 60/350 £199.00 £238.80 BC520P# 50/510 £219.00 £262.80

PGF14

CAT131

* ’V’ Twin Pump MODEL MOTOR 8/260 NEW 2HP 7/250 2 HP 11/260 NEW 2.5HP 8/550 NEW 2HP 11/550 NEW 2.5HP 16/1010* 3 HP

BC210C

MIG WELDERS

XEV16/100 †V-Twin *230V

£ £

549EXC.VAT .80 658 INC.VAT WAS FOOTER £658.80 inc.VAT

INC. CONTAINER AMAZING FOR DETERGENT LOW PRICE!

NEW

PRICE CUT HEADER

.00

20SPS12

UP TO 7938KG CAPACITY IN STOCK ONLY HEADER MODEL CAPACITYEXC.VAT INC.VAT £FROM .98 20SPS12 907kg £79.98 £95.98 79EXC.VAT .98 35SPS12 1588kg £119.98 £143.98 £95 FOOTER INC.VAT 800SS12 3936kg £329.00 £394.80

OPEN MON-FRI 8.30-6.00, SAT 8.30-5.30, SUN 10.00-4.00

NORWICH 282a Heigham St. NR2 4LZ NOTTINGHAM 211 Lower Parliament St. PETERBOROUGH 417 Lincoln Rd. Millfield PLYMOUTH 58-64 Embankment Rd. PL4 9HY POOLE 137-139 Bournemouth Rd. Parkstone PORTSMOUTH 277-283 Copnor Rd. Copnor PRESTON 53 Blackpool Rd. PR2 6BU SHEFFIELD 453 London Rd. Heeley. S2 4HJ SIDCUP 13 Blackfen Parade, Blackfen Rd SOUTHAMPTON 516-518 Portswood Rd. SOUTHEND 1139-1141 London Rd. Leigh on Sea STOKE-ON-TRENT 382-396 Waterloo Rd. Hanley SUNDERLAND 13-15 Ryhope Rd. Grangetown SWANSEA 7 Samlet Rd. Llansamlet. SA7 9AG SWINDON 21 Victoria Rd. SN1 3AW TWICKENHAM 83-85 Heath Rd.TW1 4AW WARRINGTON Unit 3, Hawley’s Trade Pk. WIGAN 2 Harrison Street, WN5 9AU WOLVERHAMPTON Parkfield Rd. Bilston WORCESTER 48a Upper Tything. WR1 1JZ

01603 766402 0115 956 1811 01733 311770 01752 254050 01202 717913 023 9265 4777 01772 703263 0114 258 0831 0208 3042069 023 8055 7788 01702 483 742 01782 287321 0191 510 8773 01792 792969 01793 491717 020 8892 9117 01925 630 937 01942 323 785 01902 494186 01905 723451

FROM ONLY

.98 49EXC.VAT .98 59INC.VAT

HUGE CHOICE INC. BOOSTER PUMPS IN STOCK NOW

*Pumps solids up to HSEC650A 30mm diameter #Pumps solids up to 35mm diameter †Sewage cutter pump MODEL MAX FLOW LPM MAX HEAD EXC. VAT INC. VAT PSV1A* 140 5.8m £49.98 £59.98 HIPPO 2 (230V) 85 6.0m £54.99 £65.99 PVP11A# 258 11.0m £79.98 £95.98 PSP125 125 10.2m £87.99 £105.59 HSEC650A† 290 9.5m £199.98 £239.98

5 EASY WAYS TO BUY... SUPERSTORES NATIONWIDE

ONLINE www.machinemart.co.uk TELESALES 0115 956 5555

CLICK & COLLECT

OVER 10,500 LOCATIONS

CALL & COLLECT AT STORES TODAY

Calls to the catalogue request number above (0844 880 1265) cost 7p per minute plus your telephone company’s network access charge. For security reasons, calls may be monitored. All prices correct at time of going to press. We reserve the right to change products and prices at any time. All offers subject to availability, E&OE. Terms & conditions apply see machinemart.co.uk/finance for more details

29379 (63) FARM 39-41 Rural Advice(full).indd (112).indd1 39

27/09/2019 06/12/2019 11:56 09:46

MOULTON

Hugh Pearl Land Drainage

YARD SCRAPER YS4H

with 60 years experience of contracting can supply all your drainage and trenching requirements from design to construction

68365

The swing over latch is released by means of a rope, which can be operated from the tractor seat.

ed is an k lv or ga l w lly tee Fu s

Hugh Pearl (Land Drainage) Ltd

Heavy push pull swing over action yard scraper, for use on 3 point linkage with category 1 & 2 linkage pins, the head stock is designed to accept a standard tractor A frame.

Specification: Scraping width adjustable from approx 1650mm to 2280 mm Replaceable 50mm thick rubber blade 420mm deep Delivered weight 240kg

New Farm, Bobbingworth, Ongar, Essex CM5 0DJ

Smisby Road, Ashby de la Zouch, Leicestershire LE65 2UE

01277 890274 Fax: 01277 890322

www.hughpearl.co.uk

www.moultonfarmmachinery.co.uk Phone 01530 567040 Trade enquiries welcome Fax 01530 412512

Temporary On-site Accommodation The UK’s Largest Hire Fleet

M 67991

JONES BROTHERS Pre-Stressed Concrete Wall Panels Inspired by the latest technology in Pre-stressed Concrete Wall Panels, and with the desire to continue in meeting our customers' requirements regarding Quality, Design, Volume & Delivery...

...we have opened a new & improved manufacturing facility in Greenfield, Flintshire, North Wales

Visit the Bunkabin website to see the full range of sleeper units

BESPOKE SLEEPER • • • • •

Thermostatic controlled heating Fridge & Microwave Plenty of storage space Tilt-and-turn window with integral blind Building Regulations Compliant

Nationwide Hire Desk 0345 456 7899 Email

hires@bunkabin.co.uk

bunkabin.co.uk

• Brand new precision built moulds & tooling • Larger range of sizes & loadbearing options (95, 145, 200 & new 240, 280mm) • Selection of Concrete Lego Blocks • Increased capacity • Made to measure • Shorter lead-times • Established Quality Assured products at competitive prices • Design & Bespoke Project capability 68038

t: 01352 719182 or 01352 716648 • f: 01352 837690 e: tracey@jonesbrothersconcrete.co.uk www. jonesbrothersconcretepanels.co.uk www.farmersguide.co.uk January 2020

Bunkabin40 Farmers Guide Ad JAN2020_93x133mm.indd 1

39-41 Rural Advice (112).indd 40

09/12/2019 09:59

09/12/2019 20:49

Rural Advice

Planning ahead in a changing industry In this month’s rural advice column, Carter Jonas partner Mark Russell muses on how climate change is affecting the industry, the growing focus on farm diversification as a mode of income generation, and the importance of making sure your will is up to date. As we come to the end of 2019, one theme that stands out is climate and the part it will play in our commercial futures over the next 10-20 years. From carbon sequestration to minimising single use plastic; from being paid for our natural capital to working out what value we will get from public goods, there are going to be changes – and this time they will be market-led, turbocharged with subsidy payments. Our energy team is already seeing growth in the sale of energy assets, and they are on the hunt for solar sites where the landowner has a secure rental income and would like to turn that into an early capital receipt. Meanwhile, our planning and development teams are seeing more pressure on the outskirts of village and town sites to provide multiple site uses, including residential space, built public realm, public open space and now biodiversity net gain. As land use intensifies, our rural team is seeing more focus on income generation, with clients wanting help improving margins, as well as making radical decisions about who does

what and why. In terms of diversification, in a world of such low interest rates there is a real yield gap to be exploited between the cost of borrowing and commercial opportunities – both on and off farm. On another note, we recently held a seminar on intestacy rules. Working with accountants, we have been learning about how it can impact families when wills are not kept up to date. In one case, a father passed his estate over to his son, believing this was good tax planning (PET seven years). The son got married but did not update his own will and sadly passed away suddenly, meaning his assets were split, with 50 per cent going to his surviving spouse and the rest going into a trust for the two children (with the children’s mother as the trustee). As a result, his parents no longer had control of the land they previously owned, nor of the business they had built up and managed. We are currently advising clients to capitalise on this slightly quieter time of year to make sure all their ducks are in a row. If you’re doing that, why not add updating your will to your to-do list. FG

SHEEP WE DON’T EMPLOY THEM Whoever coined the phrase ‘wisdom of crowds’ was guilty of some woolly thinking. True wisdom comes from standing apart and challenging the norms. Which is why you’ll never find our team of extraordinary people merely following everyone else. carterjonas.co.uk/rural-consultants

Mark Russell 07967 555737 mark.russell@carterjonas.co.uk

39-41 Rural Advice (112).indd 41

10/12/2019 20:53

News ATV/UTV dealer wins industry’s top award

C B

R A D I O

The 2019 ATV/Quad Machinery Dealer of the Year Award has gone to MKM Agriculture, an ATV/UTV dealer and service business based in Marston Moreteyne, Bedfordshire and Bury St Edmunds, Suffolk. The award was presented to sales manager Anthony Deacon at the annual Service Dealer Conference and Awards on 21st November by Andrew Parr, sales operations department manager of award sponsor, Honda Power Equipment. Organised by Service Dealer magazine, the awards are now in their 16th year and recognise outstanding sales, service advice and support by dealers in the garden machinery, professional

turfcare machinery, farm machinery, forestry equipment and ATV/Quad industry. An integral part of the judging process for the awards included customer feedback. The judges said: “This ATV dealer really stood out through their amazing customer feedback submitted and multiple nominations from manufacturers and logistics suppliers. They are expanding and have come a long way since three friends started the business in 1987.” Steve Gibbs, editor of Service Dealer magazine, said: “Each of our winning dealerships this year, across the product categories, have represented the finest examples of trusted, local businesses serving their communities. In these times of uncertainty, it’s reassuring that there are still independent, specialist companies who can be relied upon to provide exemplary levels of customer service.” FG

Call us NOW 01604 402403

Anthony Deacon receives the award from Andrew Parr, sales operations department manager of sponsor Honda Power Equipment, with Service Dealer magazine owner Duncan Murray-Clarke, left, and comedian Charlie Baker, right

ENCE NO LIC ED R REQUI

For the complete range of ALL CB Radios & Accessories visit

www.THUNDERPOLE.co.uk

CB Radios

From

£59.99

T-3000 New Rugged Front Speaker CB Radio

55.7cc CHAINSAW

EA5600F45D Displacement: 55.7cc Horsepower: 4.1hp Bar Length: 45cm Chain Pitch: 0.325” Chain Gauge: 0.058” Fuel Tank Capacity: 0.57L Oil Tank Capacity: 0.32L Output Wattage: 3.0kW Net weight: 5.8kg

42 www.farmersguide.co.uk January 2020

Farmers Guide.indd 1 42 News.indd 42

See our full range at www.makitauk.com 09/11/2018 12:39 08/12/2019 16:30

Farmers Guide

A LONG WAY

TOGETHER

VF technology Reduced soil compaction Heavy loads at low pressure In the fields and on the road

TO FIND YOUR LOCAL BKT DEALER PLEASE CONTACT: Tel: 0151 728 3714 enquiries@kirkbytyres.co.uk www.kirkbytyres.co.uk

FARMERS GUIDE_Cover V-Flexa KIRKBY_210x235.indd 1 Lamma 2020 pages 43-51.indd 43

03/12/19 15:45 11/12/2019 10:21

See us

4100

520

d 6. n a t S 6 all

Now fully CTF compatible 01489 896 346 : info@bigbale.co.uk www.transtacker.co.uk 68735

Lamma 2020 pages 43-51.indd 44

06/12/2019 14:29

Preview CPD points Dairy Pro: Two points will be automatically collected when you register. Include your points number on your registration. BASiS: Up to six points per day are available. You can receive two points for attending and up to four additional points for completing questionnaires on the Knowledge Trail. Go to the BASiS stand to claim points. NRoSO: Two points for attendance will be automatically collected on registration – make sure you include your points number.

Innovation to be celebrated at Lamma ‘20 Lamma is set to be bigger than ever in 2020, playing host to more than 700 exhibitors, mountains of new kit and a brand-new zone to showcase innovation in farming. Sarah Kidby reports. The show will return to its permanent indoor home at the NEC in Birmingham for the second year running, having received overriding feedback from visitors that the new venue proved ideal for an event of Lamma’s size and stature. Agribriefing’s group events director Elizabeth Mork-Eidem says: “UK agriculture finally has a show to rival its European counterparts and we believe Lamma ’20 will be even bigger and better than the last. “The NEC provides a very comfortable environment in which to view and discuss the vast array of agricultural kit on show and to talk

business, leading many exhibitors at Lamma ’19 to comment on the high quality of conversations they had with visitors.” Conversations at the 2020 show are expected to centre on the latest Brexit news and how to respond, while climate change and carbon issues will be a hot topic for debate in the livestock hall. For the first time, Lamma will play host to Farming 4.0, a new zone to demonstrate the industry’s expertise and passion for innovative technology, whilst helping to address the needs of younger people in the industry. It aims to attract new

Lamma '20 at a glance When:

Tuesday 7th January 2020 (8.30am-5.30pm) Wednesday 8th January 2020 (8.30am-4.30pm) Where: NEC, North Avenue, Marston Green, Birmingham, B40 1NT Parking & entry: Free Tickets: www.lammashow.com

talent into agriculture, challenging outdated perceptions about the range of jobs available, and putting a spotlight on technology, robotics and digital. Elizabeth further explains: “The zone will cover training and development which plays a fundamental role in the future of farming, especially in the machinery sector where so much exciting technology is being introduced at a rate no-one would have thought possible a few years ago.” There will be a vast array of new kit on display across the 11 halls, with many exhibitors unveiling new tractors, combines, drills and cultivation equipment, feeder wagons and forage machinery. Vaderstad, for example, will be bringing its new Tempo L 8 drill and Carrier XL 425-625 with CrossCutter Disc, while the new McCormick X7.624 will make its UK debut and Schaffer will launch the world’s first

compact loader with lithium ion technology. Show organisers recommend making time to visit the Farm Safety Zone, which will cover topics such as managing fire risks, keeping CoSHH simple, how to keep lone workers and contractors safe and where to find support in a crisis. There will also be safety demos featuring an Agrifac sprayer and a JCB handler. FG

If you want the best results, you need the best equipment... Come and see us on

Stand 436 in hall 9 at

AGRI SERVICES

Call 01670 789 020 or visit www.woxagriservices.co.uk

woxagriservices

woxagri

January 2020 www.farmersguide.co.uk 45

Lamma 2020 pages 43-51.indd 45

09/12/2019 21:23

Preview

New silage ejector and shear buckets previewed Two new shear bucket sizes have been added to the Albutt range.

Equipment supplier Albutt Attachments is previewing two new shear bucket sizes and a silage ejector at Lamma '20, whilst announcing their recent accreditation from SSAB for the use of Hardox high tensile steel. swap between bucket and shear grab. The specification includes the use of high tensile steels (Hardox & Strenx) in key stress areas to provide high strength and long-term reliability. Design features and specification are carried over from the high capacity SKMB models, which launched at Lamma '17.

Albutt’s SitePRO Grapple has been officially registered as a Hardox In My Body product by SSAB.

SHEAR QUALITY

The Combine Specialists

68953

The new shear bucket sizes are added to the Albutt range, which is designed for use with large tractor loaders and 2-3t lift capacity telehandlers. The shear bucket is a time-saving attachment designed for livestock farmers. It allows silage to be cut and feed materials to be handled with one attachment, eliminating the need to

Albutt says market demand for an ejector function in its range of Shear King shear grabs has led to the development of a hydraulic pusheject system, which can be retro-fitted to existing shear grabs or specified on new-build machines. Ejecting the silage block from the grab offers users the option of cutting and storing blocks for later use. Since new robotic feeding systems require accurately cut blocks of silage for robotic handling, the new ejector releases the cut block from the shear grab while retaining the shape of the block. Feed quality is maintained by retaining the block shape and the Shear King produces silage blocks which can be easily handled by robotic feeding systems, according to Albutt. The company’s unique SitePRO Grapple has also been officially registered as a Hardox In My Body product by SSAB. SitePro is designed for use with wheeled loaders, telehandlers and tractor loaders. Its applications include handling wood, tree stumps, stone, scrap,

concrete and other high-density materials. Site clearance and waste handling are two popular applications, the company says. The Hardox In My Body scheme verifies that a product has been manufactured using Hardox wear plate, not an inferior imitation, and has passed SSAB’s strict quality control. Both the product and its build quality have been approved as premium by the SSAB board. Each SitePro attachment has a unique identifier traceable through the SSAB system and guarantees the origin and material used in its construction. Hall 6, Stand 6.924

The new Shear Grab & Shear Bucket line up from Albutt

LAMMA 2020 Stand 6.924

See us at

Combine Hire & Sales

Combine Parts

Engineering Services

APH has one of the largest hire fleets in the country. Both New Holland & Claas combines are available for hire, with a wide choice of models, specifications and ages, from the TX range to the latest 780TT’s or 10.90’s.

UK’s largest independent stockists of New Holland and Claas parts. With more than £1million of stock and over 6,500 line items

Our highly specialist engineers offer a range of services, including: Routine servicing, Winter maintenance, breakdown support & insurance repairs. As well as our popular combine appraisal service from only £195+VAT

Contracts can be both part or full season hires on terms from 1 to 5 years, as well as options of full or part maintenance. We also stock a large range of combines for sale of all ages & sizes.

Albutt Ltd

01733 840691 Poplar Farm, Coates, Peterborough PE7 2DU

69003

www.aphltd.co.uk

Tel. 01242 620 252 Robin Normington 07778942138 | Dan Cross 07720087264 robin@albutt.co.uk | dan@albutt.co.uk www.albutt.com

46 www.farmersguide.co.uk January 2020

Lamma 2020 pages 43-51.indd 46

06/12/2019 14:34

fendt.co.uk Fendt is a worldwide brand of AGCO.

It's Fendt.

Because we understand agriculture.

FendtONE. The seamless connection of office and machine. Find out more at LAMMA 2020, Stand 9.210, Hall 9

Lamma 2020 pages 43-51.indd 47

10/12/2019 14:43

Preview

Bale packing machine benefits from improved design for 2020 Farm equipment supplier Arcusin is set to exhibit an update to its Multipack C14+ conventional bale packing machine at Lamma ’20 this year. The improved pickup design for 2020 can more easily load bales that are twisted in a row of bales, and therefore present at awkward angles to the pickup. The new chain setup at the base of the pickup can handle bales

presented at all angles, bringing them back into line in order to more easily enter the machine. This improves the handling rate/hr and further prevents any possible damage to the bales as they enter the machine. Arcusin SA says it is fully committed to continual improvement to the design of its machinery. Hall 17, Stand 17.340

Weigh beams come with a self-contained power pack, suitable for use in remote locations as well as the main yard.

Portable weigh beam features simulated at Lamma '20 Weighing equipment specialist Griffith Elder will be showcasing its weigh beams at Lamma ’20. The company offers a lightweight, portable alternative to a full-size weighbridge, weighing farm tractor and trailers – as well as articulated lorries and bulkers up to 50t. Running from a standard 13amp supply, the weigh beams also come with a self-contained power pack, suitable for use in remote locations as well as the main yard. Included in the standard kit are an LED indicator, ticket printer, traffic lights and numerical display. The recorded information is

Jacobsens-GFM

stored onto a memory stick which can transfer the data, via a main computer, to a spreadsheet on a daily, weekly or monthly basis as required. RFID fobs are also available and are issued for specific vehicle combinations, so that the driver does not need to exit the vehicle. Simply press a button and Date, Time and Vehicle Tare Weight are stored with every weighing. Griffith Elder is inviting Lamma ’20 visitors to head over to its stand, where it will be simulating all of the above features. Hall 8, Stand 8.416

Contact: Symon Jacobsen Tel 01561 361 340 • Mob 07973 542 142 Email: symon@jacobsens-gfm.co.uk www.jacobsens-gfm.co.uk

6R’s Linkages & PTOs available ex stock

FP-PACK WEIGHT • 800 or 1000kg main block

• 400 or 600kg slide in base

Steinbauer Tuning Modules

Available for  Case  Claas  Deutz  John Deere  Landini  Massey Ferguson  McCormick  New Holland  Steyr  Zetor • 2.7 ton – 5.0 ton lift capacity • loader compatible • fixed, floating or folded positions of lift • PTO can be retrofitted at any time

• Save fuel , time and increase productivity? • Come and have a chat and see what we can offer you

Hall 20 Stand 20.500

Available in 6”, 8” or 10” widths

68267

See us at

48 www.farmersguide.co.uk January 2020

Lamma 2020 pages 43-51.indd 48

06/12/2019 14:39

LIVE T H E LAN D

FEEL THE FREEDOM. EXPERIENCE THE PERFORMANCE. THE NEXT GENERATION VF TYRE 7% higher productivity and 7% lower fuel consumption 15% larger footprint for less soil compaction and higher yield Maximum stability at heavy road transport 30% longer life Data based on DLG test report 6800 and on test results of Vredestein R&D. For more information: www.vredestein.com

Lamma 2020 pages 43-51.indd 49

06/12/2019 14:48

Preview

Innovative slurry solutions on show Suffolk-based manufacturer Tramspread is set to exhibit its latest technology at Lamma '20, offering safe, sustainable and innovative slurry equipment. The company will display its latest remote-controlled, contractor trailer pump unit with compressor, 2,000m of hose capacity and 900-litre fuel tank. The Bauer SX2000 slurry pump is powered by a 170hp diesel engine and controlled via a high specification SIL Vision IV remote control. The 140ft3/min compressor and divert valve are also remote controlled, giving the operator unparalleled information and control via a large colour display. Flow and pressure can also be monitored with the addition of flowmeter and pressure gauge. This adds a further degree of safety and accuracy for the operator. Working with German manufacturer Reck, Tramspread is also exhibiting a slatted floor mixer, which fits between the slats

Tramspread contractor pump trailer.

in livestock housing. This avoids the need to remove slats, reducing the danger of mixing the slurry collected below. The mixer can be inserted through slats as small as 17mm and enables safe mixing with little disruption to livestock. This makes pumping easier and reduces

the need for farm workers to risk going below to attend potentially dangerous blockages. Working with Albers Alligator and Hexa-Cover, Tramspread is offering advice on containing slurry and lowering emissions. With Defra’s commitment to lowering emissions

through the clean air strategy, it is likely that all slurry will need to be covered by 2027. Tramspread offers a variety of solutions to cover existing lagoons and a range of bag tanks that can be used for temporary or permanent slurry storage. Hall 12, Stand 12.466

See us Hall 20 Stand 786

Designed to Work.. Work... Built to Last • Livestock housing • Feed storage • Crop storage • Equestrian • Leisure • Industrial • Bio mass storage

INNOVATIVE WATER PUMPING SOLUTIONS SUPER TANK Priming System

NO RADIATOR Pump Unit

SELF CLEANING FILTER

68271

marked

Browns of Wem Ltd, Four Lane Ends, Wem, Shropshire, SY4 5UQ Tel: 01939 232 382 www.BrownsofWem.com info@BrownsofWem.com

Mail us: e.whitehead@euromacchine.com Call us: 07934 720239 – www.euromacchine.com

50 www.farmersguide.co.uk January 2020

Lamma 2020 pages 43-51.indd 50

06/12/2019 14:51

Lamma 2020 pages 43-51.indd 51

06/12/2019 14:53

Redefining Agriculture At Agrimech, weâ&#x20AC;&#x2122;re passionate about machinery automation. Thatâ&#x20AC;&#x2122;s why we continuously develop and refine our products and service, to help your business grow.

WWW.AGRIMECH.CO.UK

01354 638 222

The UKâ&#x20AC;&#x2122;s most established supplier of precision farming products, offering best option advice, installation and ongoing support.

Your Partner In Precision Agriculture 01480 861824 | www.vantage-ag.uk

Vantage England & Wales | 4 Grovemere Court, Bicton Industrial Estate, Kimbolton, Cambs, PE28 0EY 52 www.farmersguide.co.uk January 2020

Lamma 2020 pages 52-61.indd 52

09/12/2019 21:28

Preview

Land drainage brings clear returns this season Significant rainfall totals in many parts of the UK over the past few months have highlighted the benefits of investing in land drainage schemes to remove excess water from the land, according to Tim Sisson, of William Morfoot Ltd.

Autumn 2019 saw horrific harvesting conditions and, in many cases, the inability to carry out fieldwork including the all-important autumn drilling program. The weather conditions created considerable extra cost – operations have been far slower, and backup equipment (and labour) has been needed to pull out stuck machinery, plus soil damage has been immense. In a normal year, land drainage is proven to aid average yields. A 25-35 per cent uplift in yield on comprehensively drained land is widely accepted as the typical improvement seen. In a wet season, land drainage provides a whole new level of value. It can provide the difference between being able to physically travel on a field or not. Many growers have commented that drainage investment has paved the way for wheat crops to go in the ground or potato crops to be harvested this autumn, whilst undrained land has been impassable. Comprehensive drainage schemes provide greater crop uniformity. It allows for fields to travel consistently from an operational perspective, while major arable operations such as drilling, harvesting and spraying can be done in smaller work windows. It also reduces stress for decision makers. Most importantly, it adds significant value to the bottom line. This year, the potential financial value that it provides is greater than normal. Many farmers have commented that land drainage investment can pay for itself overnight. William Morfoot, which delivers land drainage solutions to farms across the UK, will be attending Lamma ’20 to discuss options for farms, to remove some of the risks and concerns associated with excess rainfall. Hall 10, Stand 10.806

www.he-va.co.uk

Distributed by

HE-VA ROLLS Much more than consolidation...

VISIT US AT HE-VA’s hydraulically folding rolls adapt to the contours to efficiently consolidate and level AND can be used for much more. Add an OPICO Micro-pro to the King Roller range and take care of slug control or use for precise Avadex application. Add shattaboards or tines to Tip rolls and create a multipurpose cultivator. Tip and King Rolls have the unique hydraulic SAT system as standard, so that weight is transferred evenly across the full working width.    

King rolls 12.3m to 20.3m Tip XL rolls 12.3m – 15.3m Tip rolls 4.5m – 10.2m Vip rolls 4.5m – 8.2m

Shattaboard

Straw tines

Micro pro

Slicing board

OPICO Ltd. 01778 421111 ask@opico.co.uk opico.co.uk Profit from our knowledge

January 2020 www.farmersguide.co.uk 53

Lamma 2020 pages 52-61.indd 53

06/12/2019 15:08

Preview

Machinery supplier launches new draincleaner model

Converting farm buildings for crop drying and storage

If you are thinking about converting an existing farm building into a crop drying and storage facility, it is important to consider a few key factors, according to Flach & Le-Roy Ltd (FLR-CropDrying), who will be sharing their expertise with Lamma 2020 visitors from their stand. First, the company says, consider what type of crops you want to store; the availability of an electrical power supply; where you will place the fans (internal

or external fan house); whether the building structure is suitable for side loads transmitted by stored crop and if you will need internal thrust walls. Also, is your existing concrete floor suitable for a drive-on floor and do you have a choice of location for the main air duct centrally or down one side of the building? Last but not least, think about headroom for tipping trailers, accessibility for pedestrians and vehicles and how you will make your store bird- and vermin-proof. For those who plan to erect a new building and install a driveon facility, Flach & Le-Roy says it works closely with its distributors, many of whom can offer advice on planning issues, enhanced by local knowledge, as well as a full design and planning application service. “Whether your building is new or a converted grain store we can design, build and supply a drive-on floor or box store system to fit your needs,” the company adds. Hall 8, Stand 8.728

Machinery supplier Fentons of Bourne Ltd will launch a new model – the Homburg Draincleaner Delta – at Lamma ’20, the company has recently announced. Drainage systems can get blocked up with ingrown roots, clay, sand and iron oxide, leading to higher groundwater levels and greater risk of structural damage, according to Homburg Holland. This can also cause soil condition to deteriorate. Regular drain cleaning is therefore essential for keeping soil in top condition, which is then reflected in crop and yield quality. At Lamma, Fentons will showcase the Homburg Delta model, which is available to buy from 2020. It offers hydraulically-operated height adjustment, extension, retraction and folding of the drainage arm, and length adjustment of the guide arm. Delta is ideal for those maintaining drainage systems on a frequent basis who need to cover a large area, according to Homburg. New features include improved drive system so the reel rolls up more tightly, eliminating the risk

of slippage; upgraded hydraulics; simplified operation, with all hydraulics adjusted with one knob; more accessible drive wheels; and better hose guidance from front to back. Forklift provision has also been added to the bottom of the machine and lifting points are placed higher for modern tractors. With a new, modern and robust design, the machine can be assembled in three versions – arm right, arm left, or arm backwards. It comes with standard wireless remote control, which is watertight and has a range of over 100m, with options for rubber mudguards and hydraulic folding of the arm. Hall 12, Stand 12.246

Global Track Warehous Agricultural Tracks Extreme Heavy Duty –

• Excellent view • Extremely robust • Mechanical parallel guidance • Unique and patented

“Designed for Increased Traction and Extended Wear Life”

• Extended wear life & decreased cutting • Extra Thick 6.5mm cables—Extreme • Friction Drive 4 year Warranty • Positive Drive 2 year Warranty • One Step Vulcanization technology

02032 867166 uk@gtweurope.co.uk www.gtweurope.co.uk

See us at Hall 20 Stand 20.102

Self leveling inside!?!

Lamma Show - Stand 19.616 Find our distributors in England, Northern Ireland, and Wales on www.hfl.co.at/en

68265

54 www.farmersguide.co.uk January 2020

Lamma 2020 pages 52-61.indd 54

06/12/2019 15:10

AKE

www.cherryproducts.co.uk www.cherryproducts.co.uk

01608678 678 197 197 01608

Colchester Fuel Injection Ltd

Grain Pushers

• Heavy duty design • Circular tube frame to reduce grain traps • Bolt on extension can be added • 8mm thick blade with a nylon wear edge to protect grain flooring See us at

X-Form Stand 19.102 Grain Buckets • Designed to crowd back level and offer the very best dump angle available • Our Grain Buckets are purpose built to suit your machine • The X-Form Grain Buckets are constructed from Domex steel which gives unrivalled strength and value for money sales@cherryproducts.co.uk

Diesel fuel injection equipment test, repair, calibration and exchange Turbocharger repair, overhaul and new Diesel Particulate Filter and Selective Catalytic Reduction system cleaning Service Fully authorised by the diesel fuel injection systems original equipment manufacturers

Haven Road, Colchester, Essex, CO2 8HT T: 01206 862049 E: sales@colfuel.co.uk W: www.colfuel.co.uk

@cherryproducts cherryproductsltd

68518

/cherryproducts

CrossCutter by Väderstad Ultra-shallow tillage

Ultra-shallow tillage by Väderstad CrossCutter Disc provides full cut at only 2-3cm working depth. The unique cutting profile crushes, chops and mulches in one single pass. It is excellent in oilseed rape stubble, cover crops and grain stubble.

Learn how ultra-shallow tillage by Väderstad CrossCutter Disc will help give a perfect start to your next crop at vaderstad.com

January 2020 www.farmersguide.co.uk 55

Lamma 2020 pages 52-61.indd 55

09/12/2019 10:55

69062

40 years in the pig finishing business

Are you looking for a new reliable income from livestock? Due to continued growth BQP are offering the opportunity to join this successful contract pig finishing operation Existing buildings, buildings for conversion or purpose-built new buildings are required • Long term agreements, subsidised capital outlay and competitive returns • High welfare straw-based system • Working in fully integrated supply chain for the premium retailers

For further details contact Mark Jagger:

Mob: 07802 596702 Email: mark.jagger@dalehead.co.uk

www.bqptulip.co.uk

The Hadinghams were looking to diversify their mainly arable business back in 2015, since then they have constructed a 2000 place finishing farm, which they run alongside their arable farm and contracting business The Hadingham family run a 1000 acre predominately arable farm in Suffolk. In September 2016 the Hadinghams completed two pig buildings, with a capacity to hold 2000 pigs. The decision to diversify into pigs was taken after the family were looking to add another dimension to their predominantly arable based business. The Hadingham’s now have 7 batches under their belt. On the last batch a feed conversion rate of 2.19 was achieved, which attracts the highest possible bonus for feed conversion. For any farming businesses considering whether to diversify in to contract rearing pigs, Rob highlights the security of income that BQP have provided, “Having pigs with BQP provides a safe investment for money and complements our current farming business.”

WEIGH IT. BAG IT. STACK IT See us at Hall 8 Stand 906

...and give away as little as 5 grams on a 25 Kg bag. Whatever the state of the potato market, rely on David Harrison to have the handling solutions to meet your needs. From simple Prinsen palletisers to the Symach’s ‘all singing, all dancing’ alternatives and from the incredibly accurate Propak weigher baggers to the tough and reliable SFC stitching line, they will keep your packhouse profitable and, with expert backup, fully operational. And when times are tough Harrison have the UK’s largest stock of used and refurbished potato handling systems.

68514

Tel: 01353 740 666 sales@davidharrisons.com

Fax. 01353 741370

www.davidharrisons.com

56 www.farmersguide.co.uk January 2020

Lamma 2020 pages 52-61.indd 56

06/12/2019 15:13

Preview

New precision drill and CrossCutter Disc head to Lamma Vaderstad will bring two new products to Lamma '20 – the Tempo L 8 drill and Carrier XL 425-625 fitted with CrossCutter Disc. The Tempo L 8 combines highspeed planting precision with high capacity output of seed and fertiliser. It has eight row units, a 3000-litre fertiliser hopper and row spacing options from 70–80cm. Changing row units from eight to 12 makes the drill very versatile. The 12-row configuration enables narrow row spacing alternatives from 45.0–50.8cm. The new fertiliser hopper is available for all 8, 12 and 18-row Tempo L models, and is optional for existing Tempo L 12 and Tempo L 18 models. It is fitted with the same high-capacity Fenix III metering system as the 5,000-litre hopper, and is able to deliver up to 350kg/ha fertiliser at 15kph planting speed. Both the Tempo L 8 and the new fertiliser hopper solutions, as well as new row spacing alternatives for Tempo L 12 and Tempo L 18, went into production in November 2019. While at Lamma, the company will also showcase its new Carrier XL 425-625 fitted with CrossCutter Disc, which allows this cultivator to work at ultrashallow depths of only 3cm – and down to 5cm – across the full

Preview

The largest connected weather network for farmers

The 51cm CrossCutter Disc allows the cultivator to work at ultra-shallow depths of only 3cm – and down to 5cm – across the full working width of the machine.

working width of the machine. The Carrier XL, plus new 51cm CrossCutter Disc, is made from V-55 Swedish steel. Vaderstad says it is ideal for conserving moisture in the seedbed, while efficiently mixing crop residues within the topsoil and encouraging an early weed chit. “A shallow stale seedbed increases the number of seeds germinating, and encourages earlier emergence,” says the company’s UK marketing manager Andy Gamble. “This then means the following crop can either be drilled earlier or with the extra time created, used to prepare an even better seedbed.” Hall 20, Stand 20.320

Sencrop Over 8 000 stations across Europe and the UK

24/7 weather data from your fields

Take action and spray at the right moment

Easy installation 10-minutes to set-up

www.sencrop.com +44 116 350 0284 The Carrier XL 425-625, plus new 51cm CrossCutter Disc, is made from V-55 Swedish steel.

Come visit us

Hall 10 Stand 10.812

Lamma 2020 pages 52-61.indd 57

09/12/2019 10:26

Preview

Tackling the risks of persistent dirt on public roads Persistent dirt such as solidified mud, grain, dirt or rubber marks can be a risk on public roads, as well as on construction sites, in gravel pits or biogas plants. The Bema Scraper unit, by manufacturer Bema GmbH, can easily scrape coarse and stubborn dirt off the roads to prevent road closures and even accidents. The company says using the machine in combination with the highpressure water unit can achieve an even more thorough clean. The Scraper unit can be

installed on Bema 75 Dual, Bema 35 Dual and Bema 30 Dual. It is mounted instead of the collection hopper and controlled by hydraulic cylinders. Meanwhile the water unit can be installed on the rear of the tractor. It has a 2,000-litre storage tank and pump with operating pressure of 120-bar/50-bar. The spray bar on the sweeper is equipped with up to 11 highpressure nozzles, depending on the width of the machine. Hall 20, Stand 20.418

New and significantly improved Transtacker 4100 launches example from headland to barn. The Transtacker 4100 also operates with part loads, removing the need for a telehandler to pick up stray bales. Being fully automatic reduces stress for the operator and increases the efficiency and speed with which they can clear a field of bales. This can be vital during a harvest period of unsettled weather, Big Bale points out. Features that come as standard with the new machine include air brakes, flotation tires (with the option of purchasing extras, such as a hydraulically height adjustable drawbar), a rear working light package and a 10” night vision reversing camera to increase the ease of stacking at night. Hall 6, Stand 6.520

Big Bale Company South Ltd is set to unveil its new Transtacker 4100, which it says has been significantly improved from its predecessor. The new machine is now fully Control Traffic Farming compatible. With the addition of the bump bar mounted on the tractor’s front linkage, you can access crop grown and harvested under CTF conditions. The machine is capable of picking up all sizes of large square bales. Using the tie layerfunction produces a safer, more stable stack and removes the need to gradually increase height across the stack, increasing the machine’s efficiency. Further to this, it can re-pick existing stacks, allowing the operator to move them when necessary, for

68005

Own the best... be the best

Straw required now and for harvest 2020 • • • •

01405 862240 BUY or HIRE, NEW or USED Big Square Baler or SuperChasers from Big Bale North for the best service and choice Fully trained engineers, comprehensive parts department

See us at Hall 11 Stand 442

All straw types required All bale sizes and locations considered Baling, loading and haulage services available With longer term contracts index linked

For further information contact the AF Biomass team on 01603 881 922 or email biomass@af-biomass.co.uk

af-biomass.co.uk

Heck Hall Farm, Great Heck, Goole, E Yorkshire DN14 0BB

www.bigbalenorth.com

58 www.farmersguide.co.uk January 2020

Lamma 2020 pages 52-61.indd 58

10/12/2019 20:56

landini.it/en

VIEW THINGS DIFFERENTLY.

MEET INNOVATIVE VERSUTILITY. MEET THE LANDINI RANGE. Today, Landini offers a complete range of specialty tractors designed to meet a wide variety of application needs. The Landini line-up includes nine wheeled tractor families, a range of crawler tractors, and three ranges of equal-wheeled tractors with horsepower ranging from 25 to 225. With one of the most comprehensive model ranges on the market, Landini covers all your bases. Because when youâ&#x20AC;&#x2122;re looking for innovation, comfort and efficiency, thereâ&#x20AC;&#x2122;s really not much that can beat a Landini. Talk to us at LAMMA - Hall 8, stand 8.604.

Landini is a trademark of Argo Tractors S.p.A.

Lamma 2020 pages 52-61.indd 59

06/12/2019 15:18

69028

SEE US IN

Hall 10 Stand 10.152

EUROPEâ&#x20AC;&#x2122;S LEADING SUPPLIER OF AIR CONDITIONING PARTS FOR AGRICULTURAL MACHINERY BvL half page v2.qxp_Layout 1 30/09/2019 12:42 Page 1

WWW.APAIRLTD.COM

Quality mixer ... Quality mix ... Quality assured

BvL - German engineering at its best. Capacities from 5m3 up to 46m3 with a wide range of specifications and options, including unique options to suit all your livestock TMR needs. North: Paul McUrich - 07810 040100 / paulmcurich@gmail.com South: John Molton - 07947 719985 / john.molton@bvl-group.de www.bvl-group.de

40 years of Vmix development

60 www.farmersguide.co.uk January 2020

Lamma 2020 pages 52-61.indd 60

09/12/2019 10:29

Preview

New store loader to be unveiled Haith Group has incorporated several innovations into its new Store Loader Pro, which is set to be unveiled at Lamma '20. Visitors to Haith’s stand will be able to see how the inclusion of the latest Evolution separator allows the operator to create soil separation recipes and easily save regularly-used settings. The Evolution deformable roller separator, which removes clods, stone and haulm, can be complemented or substituted by reliable and proven Haith soil and mids separators, such as the high-frequency continental web, steel or polyurethane coils with varying size and pitch options or multi-finger stars. All units are easily interchangeable to suit growers using the store loaders for varying crops such as carrots, onions, potatoes and red beet. Another new feature for 2020 is the inclusion of an all-SEW drive option. Furthermore, Haith offers as standard taper lock rollers, meaning all drive and driven rollers have easily removable shafts, negating the need to change the whole unit when a roller of shaft requires replacement. As with the current Haith Store Loader, the 2020 model features a detachable drawbar for easy towing and can be specified with LED road lights, driver assistance system and led safety marking. All of the machine’s functions can be controlled through the remote panel’s HMI, and all of the conveyors are variable speed and reversible, making the store loader pro versatile in all store and yard layouts. Sales director Duane Hill said: “The 2020 model introduces the latest energy-saving and operatorfriendly technology and ensures easy maintenance. Our customers feel very reassured having a strong machine that keeps going throughout difficult and catchy seasons as we experienced during the dreadful 2019 harvest. We’re looking forward to introducing people to the 2020 Store Loader Pro.” Haith will be running two promotions at the show. Firstly, visitors to the stand who register their interest in a Store Loader PRO and go on to place an order will receive a free critical spares package. Secondly, Haith is repeating last year’s competition offering the chance to win a Haith grading screen. Hall 8-9, Stand 8-9.230

www.maschio.co.uk

Distributed by

Flail Mowers Front, rear and offset

VISIT US AT

ROBUST AND RELIABLE The largest range of flail mowers on the UK market with models to suit tractors from 15 to 300hp.



Working widths from 1m to 6.2m



Front & rear mounted machines with variable partial offset

Every flail mower uses Maschio’s wealth of experience in building gearboxes and drivelines - which means that Maschio flail mowers are built to last.



Fully offset rear mounted flails



Digitally-balanced rotors for longevity



Toothed kevlar transmission belts or non-slip drive

OPICOLtd. 01778 421111 ask@opico.co.uk www.opico.co.uk

Profit from our knowledge

January 2020 www.farmersguide.co.uk 61

Lamma 2020 pages 52-61.indd 61

06/12/2019 15:20

SABRE TINE DRILL FROM

£24,800*

NOW WITH 4 ROWS OF TINES

The next generation in low disturbance farming

SHORTDISC

GD DRILL

FROM £7,600*

FROM £33,600*

FROM £8,800*

VISIT US AT LAMMA 2020, HALL 20, STAND 20.764

*PRICES EXCLUDE VAT

ASK ABOUT OUR PAY AS YOU FARM PLANS CALL 01386

49155 OR VISIT WEAVINGMACHINERY.NET

30853 Weaving Sabre Tine Ad 210x297.indd 1 Lamma 2020 pages 62-71.indd 62

28/11/2019 15:29 09:32 06/12/2019

Preview

Why diversify into self-storage? Setting up a self-storage business is a great way for farmers to make extra money from their farms, with minimal effort and investment, according to container supplier Billie Box. It can be as simple as placing a group of shipping containers on a piece of land and renting the secure space to local people and businesses, and Billie Box says an increasing number of farmers are cashing in on this initiative,. Diversifying into self-storage can give you regular additional income, from land that would otherwise be left unused. Payback from the initial outlay is around two to three years depending on how much is charged for storage, the company estimates. When starting up a new business, make sure that land is hard standing, so the containers are level and doors don’t stick. New containers, as opposed to secondhand (10–15-year-old) containers are recommended as they will be more attractive to potential customers, have less issues with condensation, last longer, require less maintenance and are easier to finance. The company also advises

using shipping containers, as they are secure, durable, stackable, easily moved and maintain their resale value. Containers can be also be depreciated, giving you a handy tax advantage. Next, Billie Box suggests planning your site to maximise the number of containers you can accommodate, but make sure customers can access their units easily – they may bring large vehicles to offload their goods. It is best to provide your own locks to ensure they fit into the lock boxes. They can be supplied with master keys so you can gain access if required. Also, setting up direct debits or standing orders means you are guaranteed regular cash flow and don’t need to spend time chasing monthly payments. Finally, keeping your site and containers clean will make it more attractive to customers, allowing you to target the higher end of the market. As an extra, you could offer

Farm-Tec; Experts in Moisture and Hectolitre Weight Providing reliable, robust and accurate analytical products, support and service to the farming and foods industries

Billie Box director Jane Billing, with operations manager Matt Boyle.

‘Absorpoles’ to avoid condensation. Billie Box supplies 10ft, 20ft and 40ft containers which come with a lock box already fitted. Containers also come with air vents to reduce condensation and the company can supply a number of other optional extras, including compatible

padlocks, master keys, Absorpoles and stacking cones. The company will be giving away branded baseball caps from its stand at Lamma ‘20, available to anyone who has reserved one in advance. To reserve yours, go to www.billiebox.co.uk/contact Hall 20, Stand 20.300

Diversifying into

SELF STORAGE has never been

01347 811746

www.farm-tec.co.uk

us e an Ha d ll 2 20 0 -3 00 St

The Stables, St Marys Barn, Marton-in-the-Forest, Stillington, York, YO61 1NH

• Farm-Tec covers the whole of the UK, with qualified, factory trained field engineers able to provide onsite • Farm-Tec is DICKEY-john’s Gold Channel Partner in the UK and Ireland and is an Approved Service Centre • Farm-Tec’s laboratories are fully TASC and ISO 9001 accredited

SO EASY

Call the experts! www.billiebox.co.uk

68645

0800 121 7388 January 2020 www.farmersguide.co.uk 63

09:32

Lamma 2020 pages 62-71.indd 63

06/12/2019 15:41

Preview

UK debut of new self-propelled slurry applicator Lamma ‘20 will see the UK debut of the new Vervaet Hydro Trike 5x5 on the J Riley Beet Harvesters (UK) Ltd stand. This new version of the popular Hydro Trike self-propelled slurry applicator and manure spreader features a driven mid-axle and a completely renewed powertrain. The five-wheel concept has already more than proven itself, combining the excellent manoeuvrability of a single front wheel with the even ground pressure across the full 4.5m width provided by the additional mid-axle. With a self-contained 130hp hydraulic system driving the mid-axle, the machine’s abilities are extended even further, especially when working undulating terrain and in arduous conditions. The midaxle also gains a new stabilisation and suspension system for better operator comfort. Earlier this year Vervaet launched the VSG drive system with two hydraulic motors to power the rear axle. Switching between field

The new Vervaet Hydro Trike 5x5 will have its UK debut on the J Riley Beet Harvesters (UK) Ltd stand at Lamma ‘20.

and transport range takes place automatically and on the move up to the Trike’s 40kph top speed. A new fully electronic traction control system replaces a manual setup, and the entire hydraulic system is quieter and more efficient. Also showcased on the stand will be a Vervaet Q-616 sugar

beet harvester. First introduced three years ago, the Q-Series machines have proven to be worthy replacements for the legendary Beet Eater 617. This year’s weather has so far shown that they’re equally as capable of dealing with arduous conditions as larger machines, whilst also treading lightly. The

latest version of the Q-616 boasts a 530hp DAF-Paccar engine as well as the usual features of rotating walking shares – extreme manoeuvrability and one-wheel-per-track to minimise soil compaction. The J Riley team will be on hand at Lamma ‘20 to discuss the machine further. Hall 12, Stand 12.644

Software is our business. Farmers are our focus.

ACCoUnTS

CroppinG

LiVESToCK

Get 2020 off to the perfect start... come and see us at LAMMA on 7th & 8th January sales@farmplan.co.uk | 01594 545000 | www.farmplan.co.uk 64 www.farmersguide.co.uk January 2020

Lamma 2020 pages 62-71.indd 64

06/12/2019 15:45

HARVEST HARVEST INSTALLATIONS INSTALLATIONS DRYING SPECIALISTS

CROP

HaRvESt COnStant HUmIdIty COntROllER

Gives you guaranteed drying conditions, 24/7. Efficient and economic with thousands of units in use on all combinable crops and onion stores nationwide.

Cleaning Equipment for the Agricultural Industry MACHINERY HIRE • STEAM CLEANERS • VACUUM CLEANERS CLEANING CHEMICALS • PRESSURE WASHERS JANITORIAL PRODUCTS

HIGH PRESSURE CLEANING EQUIPMENT

AUTHORISED DISTRIBUTOR

VISIT US AT HALL 12, STAND 12.510 HUGHCRANE.CO.UK

CALL: 01795 533903

Main Office: Unit 2/3 Oaklands Park, Rougham Hill, Bury St Edmunds, Suffolk, IP33 2RW. info@harvestinstallations.co.uk

www.harvestinstallations.co.uk

T: 01493 688250

Acle, Norfolk, NR13 3ES

Whittlesey, Cambridgeshire, PE7 1UF T: 01733 286931 68585

ADR UK | TYREMART Agricultural Running Gear Specialists Professional and knowledgeable staff committed to excellent customer service. Vast stock of all types of running gear to suit many applications. 3URYHQ DQG WHVWHG high quality products. &RPSUHKHQVLYH VWRFN RI JHQXLQH $'5 spares with next day delivery on most items. 7HFKQLFDO VXSSRUW IURP the world leader LQ WKH manufacture of agricultural running gear.

www.tyremartagri.co.uk

$[OHV 6WXE D[OHV 6WHHULQJ D[OHV 7DQGHP DQd WULGHP %RJLHV +\GUDXOLF SQHXPDWLF VXVSHQVLRQV :KHHOV DQG W\UHV 6SDUH SDUWV DQG DFFHVVRULHV

ADR UK - TYREMART AGRICULTURAL LTD

Main Road, Long Bennington, Newark, Notts, NG235DJ GREAT BRITAIN Tel. +44 1400 283820 - Fax +44 1400 283137 email : info@tyremartagri.co.uk | www.tyremartagri.co.uk

See us at

Hall 18 Stand 18.716 January 2020 www.farmersguide.co.uk 65

Lamma 2020 pages 62-71.indd 65

06/12/2019 15:46

Preview

New McCormick X7.624 makes UK debut at Lamma A new range of more powerful stepless transmission tractors will be represented by the top model in a new-look line-up on the Argo Tractors stand. The new McCormick X7.6 VT-Drive tractor range is comprised of four models, with up to 240hp and CVT stepless transmissions.

With up to 230hp for draft work and 240hp for pto-driven implements and road transport, the McCormick X7.624 VT-Drive is the most powerful model in the latest X7 Series, Argo says. The complete line-up of new McCormick X7.6 VT-Drive tractors also includes the X7.620 VT-Drive, with 180hp draft power and 190hp for transport and pto-driven implements such as power harrows and tillers; The X7.621 VT-Drive serves up 200hp and 210hp, while the X7.623 VT-Drive puts 215hp and 225hp at the operator’s disposal. McCormick Betapower 6.7-litre

engines by FPT are supported stress-free in a cast iron front chassis that also provides front-end weight for optimum traction, and Stage 5 emissions compliance is achieved through a revised SCR AdBlue injection system, working in combination with a diesel oxidation catalyst (DOC) – no DPF is required. The latest-spec engines also feature optimised fuel filters and a more comprehensive oil filtration system which, together with a new engine oil specification, has allowed service intervals to be doubled from 600 to 1,200 hours, making a significant contribution

See us at

to reduced running costs. Running cost savings can also be made by using the engine braking system, which manipulates an electronic motorised valve on the turbocharger. Dynamic engine braking can be used to ease reliance on the service brakes and so extend the working life of the friction materials, or to supplement the multiple oilimmersed discs in heavy braking situations. Power and torque from the McCormick X7.6 VT-Drive tractor’s higher output engines are channelled through the new ZF Terramatic TMT20 transmission. This uses four planetary gear sets, wet clutches and hydraulic speed variation, to provide the finest possible seamless ground speed adjustment, with high levels of mechanical efficiency across the 0-50kph envelope. Control software developed by Argo Tractors offers a choice of management modes, providing optimum engine and transmission control strategies for different fieldwork and transport situations. Four working speed bands can be set by the operator through the 12in Data Screen Manager display in the cab, and manual control is available through the accelerator pedal and Easy Pilot proportional controller. Heavier duty rear-axle and power take-off assemblies handle the higher power and torque outputs, and a four-speed pto package with ‘power’ and ‘economy’ 540rpm and 1,000rpm gearing, contributes to the

Hall 6 • Stand 126

tractor’s impressive performance and fuel-economy credentials. Control enhancements to the Premiere cab interior, including electric steering wheel tilt adjustment, further improve ease of use. On the seat-mounted control console of Premium specification tractors, the ‘MySwitch’ button on the Easy Pilot hand controller – which can operate five different tasks – has been extended with a further four buttons, to which operators can allocate various hydraulic and other functions. Similarly, each of the electric double-acting spool valves – three are standard, up to seven optional – can be allocated to the armrest console paddle switches or to the mini joystick, which is typically used for operating a loader or the 3,500kg front hitch. New headland management control features include dedicated command buttons on the armrest console for quick and easy access to record, edit or engage previouslyrecorded automatic tractor and implement control sequences for different implements. The system is designed to minimise the operator’s workload during headland turns, as is McCormick Easy Steer, which reduces the number of steering wheel turns needed to go from lock to lock by up to half. The Premiere cab’s mechanical coil spring and damper suspension can be upgraded to a semi-active hydraulic system with damper settings adjustable through the Data Screen Manager display. Hall 8, Stand 8.604

ADVANTAGES OF RTKF NET

NEW SIM CARD DELIVERED RTK SERVICE ACROSS ENGLAND We can work with all makes of machinery and GPS equipment with this service IN COLLABORATION WITH ALL MANUFACTURERS COMPATIBLE WITH MOST AFTERMARKET GPS ANY NETWORK ROAMING SIM AVAILABLE

68766

Call for a quote 01223 902331

RTKFarming.co.uk

66 www.farmersguide.co.uk January 2020

Lamma 2020 pages 62-71.indd 66

06/12/2019 15:55

Concrete Flooring Specialist

SJ STANBERRY & SONS LTD See us at

Stand No 17420 • INDUST S RIAL, ST AG LTUR A RICULTUR LTURA TURAL OR COMMERCIAL • INTERNAL OR EXTERNAL • STEEL FIXING • BRUSH, T TAMP OR POWER FLOAT AT FINISHES A • FOUNDATIONS • POULTRY UNITS AND STABLE YARDS • SILO BASES • APRONS & SHED FLOORS • ANAEROBIC DIGESTION TANK BASES T • GRAIN, POTA TA TA ATO TO & MACHINERY RY STORES R • PA PATHS, ATHS, PA PA ATIOS TIOS AND DRIVEWA WAYS WA AYS • GROUNDWORKS & PREPAR P ATION PAR A

LAMMA 2020 STAND 20.570 WIN A MILWAUKEE IMPACT WRENCH ONE MORE REASON TO VISIT US @ LAMMA

HYDRAULIC ATTACHMENTS

68540

www.robustrack.co.uk - info@robustrack.co.uk - 01524 242414

01945 870076

• nationwide coverage • sales@sjstanberry.com • www.sjstanberry.com 68747

Grain Silos and Driers · Outdoor silos · Indoor silos · Fans & Heaters · Stirrers · Batch driers · CF driers · Tower Driers · Elevators · Conveyors · Intake Pits

www.danagri-3s.com 01746 762777 January 2020 www.farmersguide.co.uk 67

Lamma 2020 pages 62-71.indd 67

06/12/2019 15:58

CPR-AD-190x270.qxp_Layout 1 20/11/2019 08:47 Page 1

YOU CHOOSE THE OEM WE DO THE REST.

COMPLETE CONTRACT HIRE SERVICES Short to long term hire from 6 months and above, any make and model. You choose the OEM, we do the rest. No deposit  No upfront large VAT  Full warranty & maintenance  New equipment  Oﬀ balance sheet  Full UK Coverage  24/7 - 365 days a year call out service  Brand new machines  Latest emission technology 

WE’RE EXHIBITING AT

FIND US ON STAND 19.24 IN HALL 19

CALL US ON:

01933 232663 OR VISIT: WWW.CONTRACTPLANTRENTAL.COM

68 www.farmersguide.co.uk January 2020

Lamma 2020 pages 62-71.indd 68

06/12/2019 15:59

Preview

Show visitors to see irrigation system on display Running several hose reel irrigators can be a management challenge, says RST Irrigation Ltd, but the raindancer system controls this with ease, sending SMS messages when a fault is recognised. This allows farmers to see at a glance how much has been irrigated in the field and the order in which the field should be irrigated. It also produces water usage reports automatically. The company will be exhibiting the Gun Sector Control – new for Raindancer in 2019 – which ensures that 100 per cent of the water is provided to 100 per cent of the crops. It automatically adjusts

the gun’s stops to only irrigate within the field boundaries, while at the same time highlighting areas of the field that do not need irrigation, or areas that require more or less irrigation. The system can be seen, along with a Perrot hose reel and RST Pumpset, at Lamma. RST Irrigation is the exclusive UK importer for both the Perrot range of hose reels and Zimmatic range of Pivots and Linear systems, as manufactured by Lindsay Europe, as well as the raindancer irrigation management system. Hall 20, Stand 20.426

See us at Hall 9 Stand 9.326

Full Plug&Cool range at show Gibbons Agricultural will be taking advantage of the warm and dry of the NEC to showcase its products at Lamma ‘20 on a larger scale than ever before. Visitors will be able to see the full Plug&Cool range on the company’s stand – from its best-selling grain fans to web-based control panels and Airspears. It will also be possible to see first-hand the durability of Gibbons’ Pedestals and test the strength of its Airspear handles. The company says it has had a busy year – having kicked off 2019 at Lamma in January, it has gone on to gain customers all over the UK and Europe, launching new products and selling Plug&Cool Pedestals in unprecedented numbers. While visitors to Lamma ‘20 may have heard of Gibbons’ specialist products, the company says they may not be aware of its comprehensive range of farm services. The team will be onhand during the event to shed light on these services, which include electric motors, pumps, gearboxes, repairs and lighting, among others. The team are also keen to discuss the benefits of their all-in-one post-harvest package, the Plug&Cool Barn System. Hall 8, Stand 8.700

Gibbons’ best-selling grain fans will be on display.

Lamma 2020 pages 62-71.indd 69

The Airspear MAX will be on show at Lamma.

Plug&Cool Pedestals sold in record numbers last year.

06/12/2019 16:02

COME AND SEE THE

KNOW THE

NEW DESIGN

DRILL

OF PROXIMA AT LAMMA ‘20

•

PROVEN ESTABLISHMENT

•

RELIABLE YIELDS

•

PROFITABLE CROPS

Mzuri Pro-Til has a unique combination of features which create the optimum conditions for each seed to reach its full potential. • Award-winning design features

• Less soil disturbance, better soil

• High quality, British engineering • Saves time, fuel & money

E: info@mzuri.eu

W: www.mzuri.eu

HALL 18, STAND 18.500 WITH YOU ALL THE WAY

Tractor is Zetor. Since 1946.

UK’sming Li No.1roduct on p recti or for cof soil ity acid

You can have a technology solution. Or, a full suite of technology solutions. Join us at the upcoming LAMMA show where product experts from Topcon Agriculture will be on hand to answer your questions and provide information on the latest solutions available for your operation. Discover what it is like to work with partners who give you more by visiting

For ultimate performance

Stand 11.120

Optimises soil pH Increases available calcium Fast acting and long lasting Provides valuable nutrients Improves soil structure Flexible service options

Helpdesk 0800 090 2376 limex@britishsugar.com limex.co.uk

LimeX is a business of British Sugar plc

Stand 10.906

69056

Precision Farming Tel: 01480 496367 www.lh-agro.co.uk

On-Board Weighing Tel: 01249 472446 www.rdsmme.com 64975

70 www.farmersguide.co.uk January 2020

Lamma 2020 pages 62-71.indd 70

09/12/2019 21:31

Preview

Still time to correct soil acidity As the saying goes, the best laid plans can go awry, and land work has been extremely challenging for most since early October. Conditions are slowly improving and late liming is progressing ahead of delayed primary cultivations, but low soil pH needs to be managed as it will compromise crop yield and quality, says British Sugar. an all-time low, despite other more costly inputs being scrutinised and optimised by advisers and growers alike. Remember, a pH below 6.5 on mineral soil will start to impact significantly on the efficient utilisation of costly N, P, K and other nutrients that are often applied annually in both rotations. The most recent PAAG survey data showed that 16 per cent of arable and 53 per cent of grassland soil samples tested at, or below, pH 6.0, so the gap is being ignored at a hidden

The most recent five-year trend from the British Survey of Fertiliser Practice (BSFP) demonstrates the ongoing reduction in liming for both arable (all tillage) and grassland (all grass) rotations, with just 7.8 per cent of arable and 3.4 per cent of grassland rotations being limed annually (Table 1). This is equivalent to liming arable land on a 12-year cycle and grassland on a 28-year cycle. Such practice will not sustain yield and profitability. Ag-lime use is pretty much at

Table 1: BSFP five-year Ag-lime use trends 2014-2018. Year

2014

2015

2016

2017

2018

5 yr avg

All tillage

8.7

8.0

6.4

8.4

7.4

7.8

All grass

4.0

3.1

3.2

2.9

3.7

3.4

Table 2: Nutrient values from LimeX70. Nutrient

Minimum kg/t

Nutrient value/t

P205 ha

10*

£7.10

MgO ha

£3.00

SO3 ha

£0.30 £10.40

*9kg/t at Wissington.

cost from lost yield opportunity. Robust soil pH testing underpins an effective liming policy to avoid consequential loss of yield and quality by maintaining pH at an appropriate level for the rotation. Ignoring soil pH and available calcium can prove a costly mistake even in the short to medium term. Therefore, once the soil pH results have been determined, it is lime quality that matters most when it comes to the rate of and longevity of pH correction. Be aware that not all ag-lime materials meet the Aglime Quality standard, so ask for more than just the material NV. Importantly, do you know what percentage passes the 150-micron sieve, and what the reactivity performance

level is? A quality lime should have at least 40 per cent passing 150 microns, with at least 70 per cent reactivity. NV combined with fineness drives the reactivity, and with it, the rate of and extent of pH change and potential longevity. With over 85 per cent passing 150-micron sieve, and minimum 95 per cent reactivity, LimeX offers fast and lasting pH correction in arable and grassland rotations, and can be used in organic farming systems. Furthermore, the integral nutrient package within LimeX contributes to maintaining soil fertility and increases available calcium. Every tonne of LimeX70 supplies approximately £10/t of additional nutrient value (Table 2). Hall 10, Stand 10.906

nc a n i F 0%

Well you did ask for a drill for Christmas. Fewer passes, smaller fuel bills and now 0% finance on all new machines until 31 January 2020. The Claydon System creates an ideal growing environment for both your crops, and your business.

For business users only. Terms and conditions apply. The financing of CLAYDON new machines is available only through De Lage Landen Leasing Limited (“DLL”) in the UK for deliveries up to [31/01/2020]. This does not constitute an offer and is not binding on DLL. All applicants must be 18 or over and credit is for UK registered businesses only (subject to approval). Pricing information is a representative example only and is based on a HIRE PURCHASE basis with 3 x Annual instalments at £12,409.66, administration fees and option to purchase fee apply and is subject to availability. Unless specified quoted price above does not include VAT. VAT needs to be repaid in full upfront. Availability of financing is subject to approval by DLL and cannot be combined with any other campaign. Guarantees and indemnities may be required. DLL is authorised and regulated by the Financial Conduct Authority only in respect of agreements regulated by the Consumer Credit Act 1974. This flyer has been prepared for promotional purposes only. It is not meant as advice on how any transaction or aspect of it should be qualified from a legal, tax, accounting or other perspective. We cannot guarantee that any information provided in this document is complete or accurate or fit for your purposes. We recommend that you seek independent advice. Example: Based on 1 + 2 Annual Payments on 50% of the RRP or balance financed if lower. Claydon T4 Hybrid Drill RRP £74,458. 50% of RRP £37,229 on a 1 + 2 profile gives 3 annual payments of £12,409.66.

Lamma 2020 pages 62-71.indd 71

10/12/2019 09:53

Preview

Company takes major steps to reduce environmental impact Parts and accessories supplier Bepco UK has taken steps to dramatically reduce the environmental cost of its commercial operations. Bepco and TVH have worked sideby-side to create a collaborative commercial facility in Kidderminster, Worcestershire, in order to better serve their UK and Ireland customer base. The new 12,000m2 warehouse, which is expected to become operational from January 2020, already boasts a number of eco-friendly benefits. One square kilometre of vegetation surrounding the premises has been cleared to make way for a dedicated conservation area, supporting the growth of wildflowers and the ecosystems of local wildlife. Inside, there is a state-of-the-art motion sensitive, LED lighting system, which has been installed to cut energy consumption by up to 42 per cent. It is predicted to hold more than 80,000 SKUs and has the capacity to expand to 17,000m2. In addition, the company now recycles around 36t of cardboard and 8t of 98.2 plastic wrap each

quarter. When packing customers’ orders, the company uses 100 per cent biodegradable plastic, and recyclable paper tape will be rolled out in 2020 following successful trials at the end of 2019. Wooden pallets are even broken up and offered as firewood to staff and the local Severn Valley Railway for firing steam engines to run the classic trains. Any remaining wood is dispatched to the recycling centre 200 yards from the company’s Hartlebury warehouse. Bepco managing director John Percy said: “A lot of our replacement parts and machine accessories are both bulky and heavy. As a result, it’s a huge challenge to reduce our carbon footprint due to the energy demands required to handle and transport them. “Nonetheless, I am incredibly proud of the steps we’ve taken to improve Bepco’s overall efficiency. The results we’ve already achieved

A glimpse inside the new warehouse facility (pictured in October 2019).

are very encouraging, and we’re looking forward to improving upon them in 2020 and ahead.” TVH and Bepco worked carefully to find a suitable site for their new facility, even plotting the home addresses of their workforce to narrow down the search radius, in an effort to reduce commute times for staff. Warehouse and logistics manager Martin Packer

said: “We are proud that the new premises are within walking or cycling distance for more than 80 per cent of our current employees. With an expected workforce of more than 150 personnel when the office and warehouse become fully operational, this means less cars on the road, less pollution and healthier staff – a great outcome all round.” Hall 9, Stand 9.442

Meet the team and find your nearest, approved Bepco stockist

Discover a range of more than

130,000 items

Stand 9.442, Hall 9

68964

from one of the world’s leading independent suppliers of tractor parts & accessories

www.bepcoparts.com 72 www.farmersguide.co.uk January 2020

Lamma 2020 pages 72-81.indd 72

06/12/2019 16:13

68772

CULTIVATION MANAGEMENT

DISC HARROWS

CAMBRIDGE ROLLS

DISC MULCH STRAW HARROW

TINECUT CULTIVATOR

See us

d 316

Stan Hall 12 LOW DISTURBANCE SUBSOILER

Office: 01684 310112 • Mobiles: Nigel 07850 825980|Ross 07815 110529 email info@bullocktillage.co.uk • web www.bullocktillage.co.uk January 2020 www.farmersguide.co.uk 73

Lamma 2020 pages 72-81.indd 73

06/12/2019 16:16

Landquip

Terra Solutions

69013

Stand 17.360

Trailed Mounted Demounts Conventional â&#x20AC;&#x201C; Organic â&#x20AC;&#x201C; Hybrid Disc Harrows 2.5 to 16.5m Stubble/Straw Harrows Tooth-drag Harrows Inter-row Cultivators Rotary Harrows Ridgers

Tel: 01379 588286 sales@landquip.co.uk www.landquip.co.uk

Self Propelled Nitro-Band Systems Umbrella Fertiliser Nozzles

Landquip Crop Sprayers Stand 17.360

MIEDEMA MERCER MACHINERY Potato Handling and Irrigation Specialists

67973

See us at

Stand No 19.512

Miedema Mercer Machinery Limited, Unit 2 Bowley Court Farms Hope-Under-Dinmore Leominster Herefordshire HR6 0PL Email sales@downsuk.com

Telephone 01568 797601 www.downsuk.com

Miedema Mercer Machinery Delighted to bring Downs Innovation & Performance to the UK!

74 www.farmersguide.co.uk January 2020

Lamma 2020 pages 72-81.indd 74

09/12/2019 21:38

The new T-Sem 800, with separate Seed, Fertiliser and Micro Hoppers, undergoing evaluation in France.

Preview Creating the perfect steel frame building

Wet autumn reinforces the arguments for direct drilling For many, this autumn will be one of the wettest they have ever encountered and the prospect of a greatly reduced winter wheat acreage is looming. Simtech Aitchison’s Simon Clarke, however, is reporting some positive customer feedback: “Several customers have called me to say they are near to, or have completed their autumn drilling. Those who have been direct drilling for several years are definitely the ones who are best off though. When you stop moving soil around, the surface texture changes quite quickly and the soil becomes freer draining, therefore allowing you back on the land much sooner after heavy rain.” The company believes the light

weight and simplicity of their drills make them better suited to wet conditions. Simon continues: “It’s the uncluttered design that reduces problems, particularly with trash flow and seed tube plugging. I would be the first to admit that every machine has its limits and that some parts of the country have been much harder hit than others. But the evidence is clear, that given a committed approach the soil will pay you back for leaving it alone.” Simtech will have a selection of their drills on show at Lamma '20. Visitors to their stand will get the first UK glimpse of the new 8m trailed model that is currently undergoing evaluation in France. Hall 18, Stand 18.250

Graham Heath Construction supplies buildings throughout the UK for the agricultural, industrial and equestrian industries and since its opening in 2003, has grown significantly. The team can design, supply and fit a steel frame building for a customer as an offthe-shelf design or a fully bespoke build and will beat any genuine like-for-like quotation (T&Cs apply). Due to company expansion, Graham Heath Construction can now guarantee delivery in 6-8 weeks from the date of order confirmation (excluding the

Christmas period) and now also offer building refurbishments and internal fit-outs. The steel-framed building specialist will be exhibiting at Lamma ‘20 and providing a number of promotional offers during the exhibition, which you can find out more about on the Graham Heath Construction stand. Visit the Graham Heath Construction stand at Lamma ’20 in Birmingham from 7-8th January for more information, free drinks and goody bags! Hall 11, Stand 11.438

Graham Heath Construction provides customers with a fully bespoke steel frame building or off-the-shelf design in 6-8 weeks (excluding the Christmas period) and are now offering building refurb and internal fitouts.

CREATING THE PERFECT STEEL FRAME BUILDING

VISIT US AT Qual

ured B Ass

Stand: 11.438

g ldin s ui

We’ll Beat Any Genuine Like For Like Quotation*

*T&C’s apply. See website for full details.

ONE OF THE UK’s LEADING MANUFACTURERS OF STEEL FRAME BUILDINGS Made in Britain

80’ x 60’ x 20’

LIVESTOCK OFFER

100 x 40 x 15

WORKSHOP OFFER

From

GRAIN STORE 1,000T

£28,750 Ex works

£16,500 Ex Works

60 x 30 x 12

15 years’ Experience Nationwide Delivery Bespoke Buildings

£11,995

5* Customer Service

Ex Works

*NEW* Building Refurb & Internal Fitouts

CALL US TODAY FOR YOUR BESPOKE QUOTE & OUR SPECIAL OFFERS 01270 781158 or email: info@gh-construction.co.uk @GrahamHeathConstructionLtd

@GrahamHeath Construction

@GHConstruction

www.gh-construction.co.uk January 2020 www.farmersguide.co.uk 75

Lamma 2020 pages 72-81.indd 75

06/12/2019 16:17

Preview

New feeder offers milk yield benefits BvL is launching a new version of its V-Mix mixer wagon, specifically designed for use with Compact TMR, which the company says is attracting considerable interest due to its milk yield benefits. Compact TMR originated in Denmark and involves the soaking and premixing of the dry components of the ration with water. This is left to soak overnight, after which the rest of the ration mix is added. According to BvL, this makes it impossible for the dry components of the forage to be separated out from the rest of the mix, either during the feeding out process or by the cow pre-sorting. As a result, every cow is fed a far more consistent ration, resulting in a yield improvement of up to 2-litres per cow, in addition to potential improvements in milk quality. At Lamma '20, BvL will display its new 36m3 triple-axle V-Mix feeder, which has been designed specifically

for Compact TMR. In place of the standard mixing auger, the Compact TMR augers fitted in the mixer are not as tall, but are wider and have extended mixing blades â&#x20AC;&#x201C; plus an additional auger blade for more intensive mixing. The mixing augers are made using a V2A rust-proof stainless-steel surfacing for durability. Due to the need to leave the wet mix in the mixer overnight and the extended mixing time, this is also faced with V2A rustproof stainlesssteel to protect the mixer body and the augers are fitted with a seal to avoid water ingress to the inside of the auger cone. As with other mixer wagons in the V-Mix range, there are a wide range of discharge door options

Press Roll Rings 01673 857619 info@agricast.net

CULTIVATION PARTS & SPECIALIST SOLUTIONS

and a discharge conveyor is available on all models. Doors can be fitted on both the left- and right-hand side of the feeder, which BvL says provides complete feeding flexibility and even allows the mix to be deposited on both sides simultaneously if required.

New app improves accuracy BvL has also introduced a new app-based weighing and feed management system, which will be fitted to the Compact TMR V-Mix at Lamma. This helps to achieve accuracy and consistency, which are essential for optimum results from Compact TMR. The new app-based V-Dairy Feeder TMR system is designed so that information on the ration mix can be quickly and easily accessed, on several mobile devices at the same time if necessary. Depending on the level of access rights assigned to the user, BvL says it is possible to create and manage feeding groups, rations and

feed components, with the updated information then synchronised with all other users. When feeding, the ration information is also displayed via Wi-Fi or Bluetooth on the transceiver box on the diet feeder, which is linked to weigh cells and weighing computer, so the operator can clearly see the proportion of ration components required as they are loading. As each component of the ration is added, the actual total loaded is immediately uploaded and recorded by the app within the original web area, and at the end of the mix an overall score for the level of accuracy is displayed. In addition, information such as the overall mixing time and rotor speed is also recorded so that a complete daily record can be stored and accessed for future reference if necessary. Both Android and Apple iOS versions of the BvL V-Dairy Feeder TMR app are available. Hall 7, Stand 7.704

COME AND SEE THE FULL RANGE OF AGRICAST STEEL PRESS ROLL RINGS HALL 20 @ LAMMA 2020 ON 7th & 8thth JANUARY

SPECIAL OFFERS FOR ALL ORDERS PLACED ON THE DAY

76 www.farmersguide.co.uk January 2020

Lamma 2020 pages 72-81.indd 76

08/12/2019 16:58

DRAINAGE LIMITED Lodge Works, Great Ashfield Bury St Edmunds, Suffolk IP31 3HA Email: trenchers@milesdrainage.co.uk See us at

Stand 12.250 Hall 12

Y DRAINAGE SPORTS & AMENIT L DRAINAGE FIELD & REMEDIA LLARY WORKS DITCHING & ANCI

67029

cialists e p s e g a in a r d the land

01359 259424 www.milesdrainage.co.uk

First class seats for every journey 10% off RRPs – call for details

TEK Seating, the UK’s biggest independent vehicle seating distributor for the OEM and aftermarket, offers a wide range of competitively priced, quality agricultural seats and spares from leading suppliers such as KAB Seating, Grammer, United Seats, Isringhausen and Sears.

XH2/U4

81/E6

SCIOX Super

Stand 6.502

MAXIMO PROFESSIONAL

T600

01892 515028

66212

sales@tekseating.co.uk | www.tekseating.co.uk 68740

Branches: Tunbridge Wells, Kent and Rearsby, Leics January 2020 www.farmersguide.co.uk 77

Lamma 2020 pages 72-81.indd 77

06/12/2019 16:18

VISIT US AT

HALL 6, STAND NUMBER 410 7TH & 8TH JANUARY 2020

TO DISCOVER OUR EXTENSIVE RANGE Visit www.manitou.com or contact your local Manitou dealer

Lamma 2020 pages 72-81.indd 78

06/12/2019 16:19

Preview

New muck spreader and boron steel beaters

Teagle Machinery is introducing a new and improved Titan 15/17 muck spreader for 2020, incorporating extra heavy-duty 18mm diameter bed chains, a 60mm rear driveshaft and a number of features to reduce the time required for routine maintenance. To ensure operators of Titan spreaders gain the greatest benefit from the nutrients in their manure, Teagle says its focus for development has always been the design of the discharge beaters. This ensures muck is effectively shredded and evenly spread behind the machine. For greater driveline protection from foreign objects, a set of swinging flails which sit at the base of the beater has been developed to fold back under excessive loading.

From the 1st January 2020, Titan 10/12/15/17 models will incorporate Heat Treated Boron Auger Flight as standard specification, to provide longer service life. Teagle launched its first Titan rear discharge range of muck spreaders in the 1970s, followed by side discharge machines. After extensive development, in 2013, the company brought out an entirely new range of rear discharge machines to its domestic and international customers, again under the Titan banner. A new production hall was commissioned two years later, dedicated to their production. In 2016, the range was extended to topout with the Titan 15 and 17, with a maximum loading capacity of 20m3. Hall 19, Stand 19.216

Potato handling specialists to exhibit palletiser David Harrison Handling Solutions will be exhibiting its tried and tested hardworking Prinsen Palletiser at Lamma ‘20. Palletisers have become recognised as a major contribution to labour saving in vegetable handling operations. They have gained additional popularity as trailer manufacturers increased the payload capacity of their curtainsiders and container wagons, while the Health and Safety Executive restricted manual stacking to shoulder height. So, while a trailer may now take stacks of potato bags up to 10 or 13 layers high, manual operations are restricted to eight. With 86 machines sold so far nationwide, the Prinsen palletiser has a true operating rate of 9-10t per hour at 25kg bag size, and can handle bag sizes ranging from 5kg all the way through to 50kg. Stacking onto pallets from standard 1m x 1.2m, and 1.2m x 1.6m, to euro pallets. Established back in 1975, potato handling specialist David

CONTROL

SLUGS

Simply and efficiently

Better Better attractiveness attractiveness

Better Better spreadability spreadability

Engineered with exclusive

attractant technology

Better Better attractiveness attractiveness

Better Better spreadability spreadability

Better Better palatability palatability

Persistence Persistence Better Better persistence persistence

David Harrison supplied palletiser.

New for APPROVED FOR

2020: POTATOES

De Sangosse ferric phosphate pellets are manufactured with the finest durum wheat using our advanced wet process. They are proven to attract slugs, are fatal once ingested, and offer premium performance with excellent environmental credentials.

The essence of science and nature Colzactive ferric phosphate pellets have pioneered the incorporation of an enriched blend of brassica oils and extracts proven for their attractant properties for all common species of slugs. Attractiveness is a crucial feature and Colzactive’s unique formulation makes it more potent than any competitor.

Better Better Persistence Persistence Better Better IronMax Pro, Fe-est, Ferrimax Pro, X-Ecute and Sigon contain ferric phosphate. Always read the label. Use pesticides safely. palatability palatability

Harrison is well known for its wide range of new, used, and re-built vegetable handling and packhouse machinery, including elevators, weighers, washer driers, vegetable graders, hoppers, inspection tables, field vegetable equipment, conveyors and box handlers. The company also supplies a range of heavy industrial conveyors and recycling equipment. Hall 8, Stand 8.906

persistence persistence

Experts in the science of slug control

01223 811215 info@desangosse.co.uk www.desangosse.co.uk

January 2020 www.farmersguide.co.uk 79

Lamma 2020 pages 72-81.indd 79

10/12/2019 21:00

Preview

New Straw Buster launches Importer and dealer Welmac UK Ltd will launch the new Straw Buster F1050 at Lamma '20, taking the strain off mixer wagons by processing straw for feed rations to the correct length before it enters the diet feeder. With 64 carbide grit hammers and screens to suit requirements, the new F1050 promises to provide the perfect chop length. Two dual augers move the ground straw away from the rotor onto the 4m-high stockpiling conveyor. Meanwhile, the 21-spline PTO runs at 1,000rpm from the tractor driving pulleys and 8V belts, which uprate the rotor speed to 1,800rpm.

Positioned over the rotor is a heavy-duty mill grate, which keeps the bale weight off the rotor, allowing the hammers to maximise the productivity of the ground straw. The new SPC-2000 speed controller is also a stress control unit – it picks up the speed of the PTO and controls the flow of oil to the hydraulic motor to slow or stop the tub rotation. The F1050 has a tilting tub and a lockout safety bar, which gives easy access to the rotor for changing the screens and general maintenance, while the 5.8m conveyor folds over the tub for transportation. Hall 19, Stand 19.620

Sukup 11413 silos at Godstrup, Denmark.

Large commercial silo project completes A large commercial silo project has recently completed in Denmark, ready for harvest 2019, Sukup Europe has revealed. The system comprises three 114ft diameter flatbottom silos with a storage capacity of 12,000t in each, giving a total aerated storage capacity of 36,000t. There are also two 36ft diameter hopper silos for wet storage, with a holding capacity of 1,200t in each. However, the company says even these impressively large silos do not come close to the ‘monster silos’ it manufactures, with its largest model having a diameter of 156ft and an aerated storage capacity of 54,000t wheat – and these are the largest clear span silos in the world.

Sukup Europe’s UK director John Statt says: “Although these large silos are clearly for commercial installations and the silos that we supply to UK farms will generally range from between 300–2,500t capacity as aeration silos, or up to 1,600t capacity when using our stirring drying system, they nevertheless have many of the same innovative design features and are engineered and erected to the same high standards as the larger commercial silos. “Sukup Europe and their specialist dealers offer a complete service from project conception and design through to erection and installation and after sales support”. Hall 8, Stand 8.708

OVERSEEDING

PASS

JCMachinery

SAVE UP TO

80% IN TIME & FUEL Save time and money with the Vredo Agri one pass overseeders compared to renovation through ploughing, cultivating, levelling, sowing and rolling.

call: +44(0) 1260 224568 email: info@jcmachinery.co.uk visit: www.jcmachinery.co.uk

80 www.farmersguide.co.uk January 2020

Lamma 2020 pages 72-81.indd 80

06/12/2019 16:22

8â&#x20AC;&#x2122;â&#x20AC;&#x2122; JUMBO front pumping arm

Take advantage of the series !

16.500 ltr / 3.600 gal

Pre-equipment top hatch

Proportional air brakes

12.000 ltr / 2.650 gal

Free rear steering axle 600/55R26.5 Alliance A885 165D Proportional air brakes

Hydraulic drawbar suspension

710/50R26.5 Alliance 885

Come & see them @

Hall 12

joskin.com

January 2020 www.farmersguide.co.uk 81

Lamma 2020 pages 72-81.indd 81

06/12/2019 16:23

VISIT US AT LAMMA - STAND 7.924

TO DISCUSS THE UK’S LARGEST RANGE OF WEARING PARTS 01787 242740

www.pananglia.com

www.perryofoakley.co.uk sales@perryofoakley.co.uk +44 (0)1404 890300

Since 1947

The UK’s Most Experienced Manufacturer of Materials Drying & Handling Equipment

Cereals & Crops - Grass - Herbs & Spices - Woodchip - Sawdust - Anaerobic Digestate - Recycled Matter

• Continuous Flow Grain Driers & Belt Driers • Chain & Flight Conveyors

• Belt & Bucket Elevators • Aspirator Pre-Cleaners • Augers & Screw Conveyors • Levelling Conveyors • Belt Conveyors • Ducting & Valves

New Range of Silos Launched by Perry of Oakley Ltd. Perry of Oakley Ltd., the UK’s most experienced manufacturer of materials handling & drying equipment have announced the introduction of a brand new range of flat bottom & hopper bottom silos engineered in conjunction with SiloMaster, a newly formed company that boasts a team of engineers with over 50 years of experience in the design & manufacture of silos and bulk storage solutions. 82 www.farmersguide.co.uk January 2020

Lamma 2020 pages 82-91.indd 82

06/12/2019 16:26

Preview

Exciting precision technology developments One of the main sticking points with precision farming has always been moving data from one system or machine to another. With the Omnia Precision Agronomy system, this is now easier than ever. Visitors to the Hutchinsons stand at Lamma will be able to hear how exciting collaborations with leading machinery and data management systems – such as Claas, Vaderstad and Muddy Boots – have resulted in much improved streamlined data connection. “For some time now we have been working closely with our industry colleagues to look at how to connect systems together to transfer data using modern cloud computer systems, which means that the user doesn’t have to handle any data,” says Hutchinsons precision technology manager, Oliver Wood. The new connectivity agreements mean that Omnia users are able to generate a seamless flow of data from the Class telematics system straight into Omnia. Field boundaries can be shared between the two systems and yield maps will be automatically sent to and processed by the OmniaHub system. “This is a real step forward for users as it will allow them to make management decisions as soon as the crop is harvested,” Oliver highlights. It is also possible to use the Omnia Connect app with Vaderstad E Services drills. Variable rate drilling plans that have been generated in Omnia, or in any other third party system, can be transferred to the Connect app which is connected to a Vaderstad drill. Muddy Boots users can also transfer field and cropping information and field maps between GLGM and Omnia. Information can be changed in one system and it is then automatically passed to the other, making users more efficient, as this facility removes double data entry. In addition to this, visitors to the Hutchinsons stand will have access to the groundbreaking TerraMap soil scanning system, which revolutionises the way in which soil nutrient mapping is currently undertaken in the UK. “With such a growing level of interest in soils, the availability of TerraMap comes at the perfect time for farmers who are looking for that next level of accuracy in understanding their soils – which

has not previously been possible,” says Mr Wood. “It does this by using gamma-ray detection technology that delivers resolutions of over 800 points/ha, providing high definition mapping of all common nutrient properties, pH, soil texture, organic matter and CEC as well as elevation and plant available water. “The significance of this

methodology is that it is not affected by soil moisture, compaction, crop cover or cultivation state.” The results from TerraMap are used to create maps within the Hutchinsons Omnia system, which can then be overlaid with additional field information such as black-grass, yields and so on, to create the most accurate, consistent and detailed variable rate plans. During Lamma, Hutchinsons agronomists will also be on hand to discuss how these tools play a key role in an integrated agronomy programme that’s easy to use and implement on farm. Hall 10, Stand 10.908

COUSINS NEW PRODUCTS at LAMMA: Hall 12 Stand 12.680 Open Channel™ Roller Top Disc™

High Speed Short Disc Harrow

Special Show Offer £6,995 On Farm

4.2m Crop Check™ Cover Crop Roller

For more information please call the sales office on T.01945 584600 or visit our website: www.cousinsofemneth.co.uk sales@cousinsofemneth.co.uk

68507

January 2020 www.farmersguide.co.uk 83

Lamma 2020 pages 82-91.indd 83

10/12/2019 11:35

Sieving harvesters show their worth in wet conditions When conditions are tough, only the harvesters with high traction, high stability and low soil pressure can continue to do the job, according to Dewulf. The company says its Kwatro Xtreme self-propelled, 4-row sieving harvester, excelled during the wet conditions this past harvesting season. A new feature for the Kwatro Xtreme was released in November, so that all new machines now come equipped with a haulm roller unit with extra spiral roller as standard. According to the company, this guarantees that even when dealing with tough and ample haulm, a maximum of haulm is removed from the product flow before the first

cleaning unit. Both the speed and position of this haulm roller unit are adjustable from the cabin. An anti-blocking system also avoids congestion in the product flow. Ideal users of the machine are growers who plant in 4 x 90 cm or grow in beds of 1,800mm. The 4-row harvester’s double 900mm wide tracks and large 1,200mm wide rear wheel guarantees an extremely low soil pressure at all times. Moreover, the Kwatro Xtreme’s sieving path retains its full width over the entire path, which makes the machine unique in its class, according to Dewulf. It also comes with a large 17m3 bunker, with the ability to unload on the move. Hall 8, Stand 8.814

Your hydraulic and electro-hydraulic partner for the agricultural industry

Auto-Level

Dealers Engineers We stock: • Test equipment: pressure, flow and electrical • Specialised valves • Kits to modify, improve existing machines

We supply: • Retro fitted kits fully referenced • Replacement pumps, motors, joysticks, solenoids • Workshop equipment • Piston pump repair

Manufacturers

HIGH SPECIFICATION AS STANDARD • CLEAN CUT SAFETY HEAD • AUTO-LEVEL CO-PILOT TECHNOLOGY

We offer: • Design facility • A complete package: hydraulic kit + control box/ joystick • Personalised: decals / logo • Large stocks

• ELECTRONIC PROPORTIONAL CONTROLS

E: info@razorbackuk.com

W: www.razorbackuk.com

7-8 January NEC - Birmingham Hall 19 Stand 112

Feel free to contact us :

www.hydrokit.com T: +44 (0)1905 347347

Please visit us at

Tel: 01728 684 800 Fax : 01728 684 808 E-mail : uksales@hydrokit.com

84 www.farmersguide.co.uk January 2020

Lamma 2020 pages 82-91.indd 84

10/12/2019 21:02

Preview

New TerraBlade Heavy Duty inter-row hoes Claydon Drills will exhibit a 6m-wide version of its new inter-row hoe at Lamma '20, as well as two examples from its range of Claydon Hybrid drills. A new TerraBlade Heavy Duty inter-row hoe has been launched in response to strong and increasing demand for Claydon’s existing TerraBlade models, the company says. It promises to effectively eliminate weeds or companion crops growing between the rows in any strip seeding system, complementing the use of herbicides in a conventional arable system and providing the ideal mechanical weed control solution for organic growers. The 6m, 20-tine and 8m, 26-tine Heavy Duty versions have been designed to operate in even the heaviest soils. Both incorporate Claydon’s unique contour following TerraBlade tines, which can be infinitely adjusted to suit any row width, enabling them to be used in any band sowing system. The pressure on the blades is adjustable to suit variations in soil types and conditions. Claydon says the pure, simple design of the new models deliberately avoids the mechanical complexity, high capital cost and ongoing operating expenses of some competitors. Carried on the tractor’s

front linkage and steered manually, they incorporate a heavy-duty box section steel frame, with a fixed centre section and two verticallyfolding wings. The largest 8m model requires a minimum 80hp tractor, has an optimum working speed of 6km/h and provides an average work output of 4ha/hr. Weighing 720kg, it has a maximum width of 8.15m, but folds to 2.78m wide and 3.73m high for transport. The TerraBlade range now includes six models – the two new Heavy Duty units plus four standard versions with working widths of 3m, 4m, 4.8m and 6m, and 10-, 14-, 16- or 20-tine options.

Loss of chemicals Chief executive officer Jeff Claydon (right) says: “The TerraBlade provides a valuable additional weapon in the agricultural industry’s weed control armoury. We developed it for farmers who need an effective, reliable, low cost, mechanical method of removing weeds from their crops, which is becoming increasingly important for several reasons. In recent years numerous agrochemicals, including herbicides, have been lost to more stringent legislation, some of those which remain are becoming more costly and less effective, while an increasing number of farms are A crop of wheat that has been hoed with the Claydon TerraBlade inter-row-hoe.

The TerraBlade Heavy Duty models incorporate a fixed centre and two outer sections which fold vertically.

turning to organic production where such products cannot be used.” Ideal for use in band sown crops because the unseeded strip between the rows can be mechanically hoed, the TerraBlade is designed for use in all types of strip seeded crops. Its thin, sharp blades work at up to 30mm deep, effectively eliminating weeds from that area reliably, safely and without chemicals, greatly reducing the overall weed burden. By keeping the unseeded rows clear of weeds during the early stages of crop growth, competition for nutrients, light, air and water is reduced, allowing the young crop to grow away strong and

healthy. TerraBlade therefore has the potential to improve yields, drastically lower the potential for carry-over of weed seeds into the following crop and reduce the risk of more resistant weed types developing. The unit will give years of reliable service, has very low operating costs and offers great flexibility, Claydon says. On farms that drill early, crops may be sufficiently well developed in the autumn to start using it then and the operation can continue in the spring whenever soil conditions allow, up to the stage where the crop might be compromised by further passes. Claydon will also display two products from its Hybrid Drills range at Lamma – a 4m Hybrid T4 trailed model and 3m Hybrid M3 mounted unit, together with a 7.5m straw harrow and 6m TerraStar. Hall 6, Stand 6.600

New Product Launching at

LAMMA ‘20

Visit us in Hall 8 Stand 824 to find out more

www.standen.co.uk January 2020 www.farmersguide.co.uk 85

Lamma 2020 pages 82-91.indd 85

06/12/2019 16:30

FROM TO

NE ON -T

MODELS

CAP AC ITY

3.4

136 FROM7 170 TO9

FROM

RE M

-H

H EI

T-

MERLO MULTIFARMER

THE TELESCOPIC TRACTOR MULTIFARMER RANGE Versatility of a telescopic and productivity of a tractor.

Merlo was the first company on the market to translate the concept of a telescopic boom tractor into reality and to patent it: the Multifarmer. The cross over, which combines the characteristics of a traditional agricultural telescopic handler with those of a tractor, producing the best of both. The Multifarmer models represent a high level of performance for operations typically carried out by traditional tractors (towing and tillage). The continuous variable transmission Merlo CVTronic and the mechanical power take-off guarantee maximum efficiency and high productivity. The exclusive Cab Suspension with all round visibility, enables work in all conditions, maintaining the highest levels of comfort, ergonomics and safety.

Mechanical PTO

Excellent cab comfort

Rear three point linkage

Frame levelling

SEE US AT

7TH - 8TH JANUARY 2020 STAND 6:220 & 6:108

AT NEC BIRMINGHAM

ADVANCED TECHNOLOGY

www.merlo.co.uk

Next generation tine drill hitting the market Seven years after its original release, the next generation of Weaving Machinery Sabre Tine drill is hitting the market and, with nearly 30 units already sold pre-launch, it’s possibly one of the worst kept secrets in British farming. While the new model is based on the previous version, this is far from a simple update. The Sabre Tine has been built from the ground up to make full use of its game-changing new features, including relocated depth wheels, hydraulic depth control, side-to-side contour rolling pivot, and greater trash handling capabilities. This drill will make low disturbance crop establishment simple and intuitive for all crop systems. What does this look like in practice? It means rapid adjustment of sowing depth. It means more precise contouring, reduced fuel costs, greater resilience against wear and tear, and greater control over every movement. The Sabre Tine makes farming simpler and smarter, getting more done with less stress, and promoting superior soil health while cutting costs. Corrosion resistant materials are used extensively to ensure the drill maintains consistent high performance throughout its long working life. The robust side-to-side pivot also ensures better durability and contouring. Driven by an electronic metering system and a hydraulic fan, the metering device will deliver accurate sowing rates of everything from fine rape seed to large bean seeds, even with seed rates as low as 2kg/ha and with working widths of 6m wide. With the addition of a fourth row

of high clearance tines and settling area for trash behind the third row, there will less blockages than ever before, however high the amount of trash. Depth control can be hydraulically adjusted on the move and remotely from the tractor cab, saving operators time and effort. But this isn’t just about operator comfort – less time spent on adjustments and recalibrations is more time spent being productive. The Sabre Tine makes low disturbance farming more accessible and low-maintenance than ever before. There are three models on offer – Sabre 3000M (3m working width with 18 coulters), Sabre 4800M (4.8m with 28 coulters) and Sabre 6000M (6m with 36 coulters). Standard specifications include mounted hitch system, 2,000-litre hopper capacity, 166mm row spacing, Isocan GPS metering and hydraulic fan. Further options available are hydraulic markers, electric half shut off, rotormeter 130, flug/fert/OSR applicator with controls, turbojet Avadex applicator, slug roller for turbojet, GPS double pre-em markers, variable rate unlock code and Isobus-ready compatibility. The Sabre Tine Drill is eligible for the Countryside Productivity Small Grant Scheme (CPSG) and Leader Grants. Hall 20, Stand 20.764

86 www.farmersguide.co.uk January 2020

Lamma 2020 pages 82-91.indd 86

06/12/2019 16:31

TITAN Outstanding

spread performance

Extensive range from 6m3 to 20m3 • Hydraulic or Pneumatic braking systems • Range of wheel & axle combinations

HALL 19 Std. 216

For a competitive quote CONTACT OUR SALES TEAM: 01872 560592

Performance + STRENGTH

Visit us at LAMMA: Hall 18, Stand 604

schafferuk.com schafferUKandIreland

January 2020 www.farmersguide.co.uk 87

Lamma 2020 pages 82-91.indd 87

06/12/2019 16:33

See us at

DIGESTATE AND SLURRY MANAGEMENT

Hall 12 Stand 12.466

Call: +44 (0)1449 766133 Email: info@tramspread.co.uk Visit: www.tramspread.co.uk Manufacturers and Suppliers of Specialist Slurry Equipment

JOSKIN SLURRY TANKERS

TRAMSPREAD UMBILICAL SYSTEMS

JOSKIN MUCK SPREADERS

RECK SLURRY MIXERS

SLURRY STORAGE

SLURRY STORE COVERS

JOSKIN TRAILERS

STALLKAMP SLURRY SEPARATORS

JOSKIN PASTURE CARE

67933

See us at

Hall 12 Stand 12.230

PRECISE AND EFFICIENT

SPREADING TECHNOLOGY 68865

Dribble bar systems from Vogelsang are well-known for their nutrient-efficient, ground-level application with the highest distribution accuracy. This is only possible because of robust frame structures, variable management of part-width sections and an optimised hose layout. Vogelsangâ&#x20AC;&#x2122;s dribble bar systems also provide innovative customised solutions and include the most reliable and compact precision distributors with a coefficient of variation less than 5 percent. vogelsang.info

ENGINEERED TO WORK

1801302020 product advert agriculture Lamma pages 82-91.indd 88 188x132mm EN 3001.indd 1

05.02.18 09/12/2019 12:07 21:45

Preview

Pay workers quickly, reliably and securely

A positive note following a rather challenging autumn Autumn 2019 was the wettest and most difficult that many farmers can remember, with few winter crops planted and those in the ground having suffered from the wet conditions. On a positive note, Bullock Tillage says this may be the year to fallow certain fields on the farm that suffer badly from black-grass, or where remedial action is required for drainage with ditch cleaning, mole ploughing or subsoiling. Bullock Tillage says its Disc-Sub is the ideal low disturbance soil conditioner, with leading cutting

discs to cut through residue and ensure minimum soil disturbance. The easy-to-pull low draught legs allow aeration of the soil and improve water infiltration. A variety of wearing points are available from 4-20cm working width. At the rear of the Disc-Sub is a pressed steel packer to ensure a level and reconsolidated finish to the soil surface. Attaching a seeder unit to the Disc-Sub allows the operator to sow oilseed rape or cover crops in one pass. Hall 12, Stand 12.316

For over 12 years, OnePay has been dedicated to helping some of the UK’s leading recruitment agencies, seasonal agricultural farms and employers find a quick, reliable and secure method of paying wages to workers who don’t have a traditional UK bank account. Paying wages on time is as important to businesses as it is to their workers. By choosing OnePay, workers can receive access to a multi-lingual online portal, mobile app, automated telephone service and UK-based customer service

team, so that they can manage their money at any time, day or night. Workers are given a contactless chip and PIN card, which enables them to withdraw cash from most ATMs worldwide, ask for cashback from supporting retailers, pay at any point-of-sale terminal and shop securely online. As an ALP (Association of Labour Providers) service partner, OnePay customer service and business support teams are always on hand to help clients and their workers. Hall 11, Stand 11.126

A fast and alternative way to pay your workers For workers who don’t have a traditional UK bank account

68865

www.onepay.co.uk 0113 320 1460 I forbusiness@onepay.co.uk

January 2020 www.farmersguide.co.uk 89

12:07

Lamma 2020 pages 82-91.indd 89

06/12/2019 16:36

Preview

Advantages of using VOS for drills Sprinter users, whether retro-fitted or at time of purchase. There will be more manufacturer conversion options in 2020. The many benefits of using VOS versus other openers include: very low disturbance; superior seed placement; optimal fertiliser placement (granular or liquid) when required; lower wear rates; and higher moisture retention. Other advantages include even less disturbance over time, as when the coulter tips wear they sharpen due to the tungsten placement on the underside of the wings; plus, with the reduction in disturbance, end users have experienced better weed control. The fertiliser placement can be below and between the paired row or behind in the tillage in between the paired row. The most common paired row tip will also deliver beans and rape if required, although there are many VOS coulter tips available. Martin Lishman Ltd can supply the full range of VOS coulters and tillage equipment offered by Tillage Tools. Hall 7, Stand 7.434

Bourgault Tillage Tools Ltd produces a range of tillage and drilling equipment that is both used on OEM fitted to new machinery and can also be used to upgrade existing cultivation and seeding systems. Within the range offered is the VOS (Versatile Opener System) for drills. The VOS system is very well suited to min-till and no-till systems approaches, and is gaining in popularity with Horsch CO and

Coulter suitable for fertiliser in the tillage in between a paired row

New online portal for equipment manufacturer Following a strong year for sales, vegetable handling equipment manufacturer, Tong Engineering, is looking forward to meeting farmers, growers and packers at Lamma to discuss its latest innovations and advanced handling systems for 2020, as well as marking the start of the company’s 90th anniversary year. At Lamma ’20, Tong will also be launching the company’s latest development – the new online operators manual platform, TongHUB. TongHUB will provide customers with a personal online equipment library in which all essential equipment documentation, including user manuals and spare parts specifications, will be available at the touch of a button, whether in the office or in the field. “The new TongHUB is an online portal which gives customers an exceptionally user-friendly, and convenient way to access equipment information quickly and easily,” Tong managing director, Edward Tong explains. “Each time customers buy more Tong equipment, manuals and documentation are added to their

STRAW BUSTER F1050

TongHUB profile, keeping everything in one place and directly accessible by logging in from their PC or mobile device.” Tong sales manager, Nick Woodcock, adds: “We are very proud to have reached 90 years in business, and to say that, for the last 38 of those years, we have attended Lamma every year since its very first show in Lincolnshire is certainly something to celebrate!” With engineering roots dating back to 1930, the company’s milestone year is set to be particularly monumental, with a new state-of-the-art production facility also scheduled for completion in spring 2020. Hall 7, Stand 7.630

Philip

W WA WATKINS ATK KIINS SLtd

PTO TUB GRINDER

NE W Call Andy to arrange a Demonstration

Stand no 19.620 68369

Come see us at

01400 272475

Tel Email welmacuk@btconnect.com

www.welmacuk.co.uk

Hall Farm, Stainton, Rotherham info@philipwatkins.co.uk 01709 798522 www.philipwatkins.co.uk

90 www.farmersguide.co.uk January 2020

Lamma 2020 pages 82-91.indd 90

06/12/2019 16:37

BE THE SHARPEST KNIFE IN THE BOX!

Spee

dSha

s! e t u in m in s e iv n k Sharpen your ner a le c t u c d n a r e w o ss p arper knives use le

Visit www.krone-uk.com to ďŹ nd out more about the RX and MX Forage Wagons

Lamma 2020 pages 82-91.indd 91

06/12/2019 16:39

Preview

Getting an accurate moisture reading is vital

Latest developments in digital irrigation Lamma 2020 will see Briggs Irrigation reveal the latest developments in remote monitoring, analysis and management solutions for irrigation. Farmers and growers often have several units working autonomously on different parts of the farm, which can mean driving between them to ensure they are working correctly and to make adjustments. Modern digital control networks enable essential functions to be monitored and controlled from a mobile phone, tablet or PC. Briggs Irrigation is testing new cloud-based technology, which will be demonstrated at the event. In addition to remote control, the new systems integrate the management of pumps, hose reels and Briggs’

linear irrigation booms. Managing director Adrian Colwill said: “Farmers are now familiar with a range of remote control and data logging systems and we continue to look for solutions that are easy to use but which can also help improve water management. Along with the option of a new controller on our hose reels, we are sure this will interest visitors at Lamma.” The company will also exhibit a hose reel, a diesel powered pumpset and a section from one of its large boom irrigators, along with a range of optional fittings. For livestock farmers interested in dirty water dispersal, the company will have a Rotorainer and pumpset. Hall 6, Stand 6.714

Following the success of the benchtop DICKEYjohn GAC 2500 and the Mini GAC 2500 in previous years’ harvests, the results for the 2019 harvest have also been good. Despite a steady start, heavy rain and high temperatures meant that getting an accurate moisture reading was much more difficult but even more important. Utilising the latest 149MHz grain analysis technology and UKspecific calibrations, the GAC 2500 moisture meters deliver accurate, reliable results across a range of moistures and temperatures. In particular, the differences in barley varieties, growing conditions and temperatures can make determining an accurate moisture reading very difficult. But, due to the technology on the GAC The Mini GAC 2500.

The Farm-Tec DICKEYjohn GAC 2500.

2500 and the robust nature of the specific calibrations, Farm-Tec has managed to maintain consistent accuracy across the whole of the UK. In the winter months, Farm-Tec will collect even more crop samples to further maintain, refine and improve its unique calibrations. The GAC 2500 family of moisture meters are sold and supported by Farm-Tec who develop the UK specific calibration on a wide range of commodities (wheat, barley, oats, rapeseed, peas, beans, etc) and monitor the calibrations throughout the year to ensure optimum accuracy and performance. Hall 7, Stand 7.118

Fentons of Bourne Ltd Kate’s Bridge, Thurlby, Bourne, Lincs PE10 0EN

Homburg Dynamic Drive 1.0

Better control with HDD while flushing your drains 67781

We manufacture, supply & build...

See us at Hall 12 Stand 12.246

Tel 01778 560466 or 01778 560425 Mob 07767 816555 www.fentonsofbourne.co.uk

SALES SERVICE HIRE

• Cubicle Buildings • Lambing Sheds • Dairy Units • Workshops • Grain Stores • Industrial Units • Bespoke Design

• Internal Stables • Stable Blocks • Indoor Arenas • Hay & Straw Stores

01606 738 738 | sales@ﬂgb.co.uk | www.ﬂgb.co.uk 68726

92 www.farmersguide.co.uk January 2020

Lamma 2020 pages 92-101.indd 92

06/12/2019 16:45

Looking for a cleaner? Flat screen or rotary cleaner? Head or tail aspiration? Why not try the one machine with the advantages of all! •

Inner screen serves as scalping, removing all large particles

•

Total outer screen area available for smalls removal

•

Only machine available with fully adjustable pitch

•

Aspirator after screening - With the vacuum you actually get 100% aspiration

•

Conveys/blows its own screenings up to 15 meters

•

Adjustable capacities from 4 to 40 or 80 t/h with the same machine

Meet us at

Dealers in UK Plot Feeds Ltd. LAMMA Hall 8 Stand 8.116 Robin Mumby: Mob: 07710242015 www.grainmachinery.co.uk

www.kongskilde-grain.com

AM & LT PUGH Les Pugh: Mob: 07968170848 www.grainblowers.co.uk

January 2020 www.farmersguide.co.uk 93

Lamma 2020 pages 92-101.indd 93

06/12/2019 16:46

Preview

Updated tractor design to be launched at Lamma ‘20 As part of a wider update to its entire range, the Zetor Proxima tractor will be on display at Lamma ’20 for the first time. The timely introduction of the ‘new design’ Zetor Proxima enables it to be introduced to the UK market at the Lamma ‘20 exhibition. This update follows on from the recently launched new design Major range and will roll out to the entire range of tractors during the course of 2020

– the Crystal HD being next in line in March, before the Forterra range completes the line-up during July. Not only has the Zetor Proxima changed to a more modern and streamline style, it also offers a new specification which boasts increased ventilation, more efficient

air conditioning, improved visibility, better transmission and engine cooling, to name but a few. It still, however, uses the Non Ad Blue legendary Zetor home-produced four-cylinder engine with its uncompromising power and low running costs. The Zetor Proxima is available in three variants – CL, GP and HS – the former being an entry level 12x12 gearbox arrangement from 80–110hp, followed by the GP, a 16x16 offering including a gear splitter and 40kph, again from 80 to 110hp, and finally the HS version which completes the Proxima range boasts 80–120hp and also includes a Power Shuttle 24x24 transmission, electro hydraulics as well as a host of other features you would expect to find in the modern tractor of today. The Zetor range has experienced real growth during 2019 and with its eight ranges supplying 20–171hp, this offers the dealer network a straightforward range of modern tractors to match the needs of the end user, while not loading them up with ancillary equipment. Zetor UK managing director, Nigel Wilson,

MANUFACTURING EXCELLENCE SINCE 1962

SEE IT AT LAMMA 2020

STAND 18.314

CALL US TO BOOK YOUR FREE DEMO TODAY OR TO ARRANGE A QUOTE! FG1219. Wessex International is a trading name of Wessex International Machinery.

commented: “Tractors are our core business, this is what we do well and are proud of it. Zetor as a product is now very much back at the forefront of the buyers’ minds due to the fact we have kept to our philosophy of building a straightforward unit that does not have the running costs associated with it that some of our contemporaries appear to have to endure.“ Hall 18, Stand 18.500

BFX-180 ROUND BALE FEEDER SAVE TIME – On manual labour SAVE UP TO 20% ON FEED BILLS – Through reducing wastage of feed QUIKLATCH™ SYSTEM – Fast and easy re-loading LOW MAINTENANCE – Only 2 grease points

T: 01264 345870 www.wessexintl.com

SCAN TO SEE A DEMO MOVIE

94 www.farmersguide.co.uk January 2020

Lamma 2020 pages 92-101.indd 94

06/12/2019 16:47

POTATO CHITTING LIGHTS

Join us at LAMMA

e Se 8

at us

ll Ha

All of our LED units come with a one metre lead and a 13 amp plug

d an St 0

Lights can be leap frogged Available in sizes 5ft to 12ft

Options: Free standing or hanging

THE COMPLETE SOLUTION

Designed with you in mind

All our potato lights are made to order, of galvanised construction and come PAT tested Lead length can be extended to suit your individual requirements

www.tongengineering.com

Delivery or collection options 68927

e: sales@tongengineering.com t: +44 (0)1790 752771

01621 828689 • www.kjengineering.com

BAUER Polyester Tankers

Mobile irrigation management system

10,500 – 12,500 – 14,000 – 15,500 – 18,500 Litres Tandem Axle 24,000 Litres Tridem Axle

www.bauer-at.com

• • • • • •

Your advantages: • Low Ground Pressure • Minimum Compaction • High Capacity Pumps • Heavy Duty Galvanised Chassis • Strong Non Corrosive Tank • Wide range of Distribution Systems

Monitoring of Rainstar operation Optimize your irrigation management Automatic Error messages Irrigation control via mobile devices Team management Automatic reports

Röhren- und Pumpenwerk BAUER Ges.m.b.H. 8570 Voitsberg, Austria +43 3142 200-0, sales@bauer-at.com, www.bauer-at.com

BAU_016_05 IN SmartRain 93x133.indd 1

Lamma 2020 pages 92-101.indd 95

Most Efficient and Cost Effective

68673/4

02.05.16 08:30

Contact: Adrian Tindall UK & Ireland Sales Manager 07708 919597 a.tindall@bauer-at.com

January 2020 www.farmersguide.co.uk 95

06/12/2019 16:48

KINGQUAD

Lamma 2020 pages 92-101.indd 96

06/12/2019 16:49

Preview

ROOTS & GRAIN FEEDER

New range of square balers Kuhn Farm Machinery is set to launch a new range of large square balers, which will be on show for the first time in the UK at Lamma '20. The new series, which offers increased capacity and higher density balers, includes the SB 890 (80 x 90cm bale size), the SB 1270X (120 x 70cm), the SB 1290 (120 x 90cm), and the extreme density SB 1290iD (120 x 90cm). SB balers have been developed with an improved crop intake system compared with earlier models, Kuhn says. A new crop guard design, combined with increased torque on the rotor and feeder fork driveline, gives these models up to 15 per cent higher intake capacity and greater endurance. The torque regulation system monitors pressure on the driveline, including the crank angle position sensor and plunger rod load pins. Picking up different pressures in the plunger cycle, the operator is guided to feed extra material into one side of the machine to achieve higher bale weights that lead to increased handling and transport efficiencies. Machines have been designed with full accessibility for maintenance and inspection as a key consideration, and safety is given priority with features such as solid steps and a guide rail on the knotter deck. The company says it has

The SB 1290 will be launched at Lamma along with the rest of the new range.

Lamma 2020 pages 92-101.indd 97

increased driver comfort by upsizing the flywheel to 485kg, so the operator will rarely feel the plunger strokes in the cab. Load sensing hydraulics are included as standard, with this system being used for axle locking, knife steering, roller cut and bale ejection. It also blasts an air stream over the knotters to keep them free from debris. Kuhn’s Integral Rotor system is used on all models, which it says ensures optimum crop flow into the baler. All rotor types have easily replaceable Hardox tines for extended working life. Machines are also equipped as standard with a double-knotter binding system, with electronic twine monitoring suitable for increased density bales. As with the earlier LSB range, Kuhn offers the option of an extreme high-density baler, with up to 25 per cent higher bale density. The SB 1290iD has the potential for increased handling, transport and storage efficiencies in all situations, most notably in the growing market for energy crops. Increased bale density is possible with the same tractor power as the SB 1290 due to the innovative Twinpact double plunger system. The plunger operates with split impact, in which the bottom half of the plunger hits the bale first, followed by the top half, using the full force available on each impact. This eliminates the need for an oversized driveline, flywheel or mainframe. All SB balers are fully Isobuscompatible with an intuitive user interface. Control is easy via the Isobus terminal of the tractor or via Kuhn’s CCI 50 or CCI 1200 terminals. Hall 12, Stand 12.434

• Available for front or telescopic forklift mounting or 3 point linkage • Hydraulic drive suitable for front, rear or telescopic forklift mounting • Hydraulic top link included for tractor mounted self-loading • Manual stone trap fitted to eject stones when feeding root crop • Full length trash trap under the auger helps deliver cleaner feed • Agitator wheels fitted to prevent grain bridging • Stationary cutter head for added safety • Fitted with pressure relief valve • Externally mounted motor is protected by the bucket frame

See us at Hall 18 Stand 18.700

01307 462271 • info@ritchie-uk.com

www.ritchie-d.co.uk

06/12/2019 16:51

Preview

New ATVs dubbed ‘king of quads’ Suzuki has recently released three new market-leading ATVs – the KingQuad 750 power steering and KingQuad 500 power steering/non-power steering models.

Since their introduction late last year, the new KingQuads have proven to be strong, reliable and durable as ever. They are truly Suzuki KingQuads through and through and are the result of 30 years of engineering expertise, refinement through feedback from customers, and an unequalled reputation for quality that Suzuki has earned by building each and every one of its ATVs. With engine and chassis upgrades, new features and aggressive new styling, the ATVs attracted a lot of attention agricultural shows in summer 2019. The chassis upgrades mean that all three models can now tow an impressive 600kg, an increase of 33 per cent from the previous models available. As well as this, the front suspension, steering system and rear stabiliser are all new, which combine to deliver excellent straightline stability as well as sure-footed handling when cornering and

improved manoeuvrability. The handlebars have also been raised, which improves riding position, and comfort. Major refinements and changes have been made to the engine unit to continue Suzuki’s reputation for high levels of performance and reliability. Suzuki has also introduced a range of features such as a handlebar-mounted headlight to improve visibility into the turn, plus additional storage compartments to help you carry more equipment. The new multi-function instrument panel is also easier to view and includes a service reminder icon, which pops up when the ATV is due for its routine service. Then, once the ATV is in with an authorised Suzuki dealer for its service, the work itself has been made easier through the re-design of various body parts that make some components, such as the fuel filter, easier to access. Customers can also benefit from a courtesy ATV scheme, when theirs (any make or model) is in for repair (from participating Suzuki dealers). Hall 19, Stand 19.234

NEW

TEAM LEADER 4 - SERIES 36 NOW WITH 36M BOOM

The Leader 4-Series 36 will be at LAMMA, Hall 9, stand 9.3

team-sprayers.com • 01353 661211

98 www.farmersguide.co.uk January 2020

Lamma 2020 pages 92-101.indd 98

06/12/2019 16:53

Martin Lishman Crop Storage Systems

Faster cooli n

g performa

nce

Fully automatic control systems ts Save up to 40% on energy cos

Visit us at

A 20 LAMSM 4 TAND 7.43

01778 426600 /martinlishmanltd @Martin_Lishman

HALL 7

www.martinlishman.com

68269

Forklift Brackets Weld on forklift & loader brackets to fit most makes & models JCB/Matbro £68.50+VAT all others POA

All major Debit/Credit cards accepted • Same day despatch

Terry Birch twbengineering@btconnect.com twbengineering.com

DI TR SC AD OU E NT S

07966 233104/01529 455776

JOIN US AT

Graders, washers, tipplers and fillers - trust Haith to handle it. t +44 (0) 1302 831911 e sales@haith.co.uk

www.haith.co.uk January 2020 www.farmersguide.co.uk 99

Lamma 2020 pages 92-101.indd 99

09/12/2019 21:53

BEDEC

ACRYLIC BARN PAINT THE SAFE ALTERNATIVE TO TAR VARNISH, BITUMEN AND CREOSOTE

Stand 7.400

EASY TO APPLY EXCELLENT COLOUR RETENTION MULTI-SURFACE APPLICATION FLEXIBLE - NO CRACKING OR FLAKING LONG LASTING FINISH

Ideal for workshops sheds, garages etc. One can does it all!

AVAILABLE NATIONWIDE THROUGH TRAVIS PERKINS, ERNEST DOE & SONS LTD, RIDGEONS, BREWER & SONS & DULUX DECORATOR CENTRES

The

67957

Westermann Moss Brush 0114 269 9119

See us at

www.spapowermachinery.com Hall 17 Stand 17.548 67788

collection & stacking of large square bales & packing of small square bales See the NEW Multipack D14 at

For more information contact our UK importer Steve Gillman on 01159 655970 or 07790 989024

Hall 17 Stand 340

All Arcusin machines feature our automatic loading process Arcusin bale chasers are suitable for CTF (controlled traffic farming) systems Some models offer hydraulic suspension and trailing steering axles

Tel: +44(0)1159 655 970 Mobile: +44(0)7790 989024 E mail: stephen@arcusin.com • www.arcusin.co.uk • www.arcusin.com 100 www.farmersguide.co.uk January 2020

Lamma 2020 pages 92-101.indd 100

06/12/2019 16:54

Preview

Group returns to the NEC for the 39th Lamma show

The new Manitou MLT 420-60H telehandler.

Manitou Group’s stand will feature new and improved machines, attachments, and interactive pods explaining the many benefits of Manitou and Gehl ‘connected machines’ and machine management apps. As part of Manitou Group’s drive towards digital transformation, the new MyManitou and MyGehl apps give around the clock access to a stream of data transmitted by the connected machine in real time. The new apps provides users with the exact location, fuel level, and maintenance notifications to ease their day to day operations. Users can also contact their local Manitou or Gehl dealer via MyManitou and MyGehl to arrange work on their machine by a factory-trained technician using genuine parts. Opening up endless possibilities for Manitou and Gehl customers to improve performance, safety, security, and reduce their total cost of ownership (TCO), the free apps allow users to connect with their machines, and reap the many benefits.

Mounted

of control the MLT 420 features hydrostatic 4-wheel drive powered by an efficient and ultra-reliable 56hp Kubota engine. The larger Manitou MLT 630-105 is a real work-horse capable of lifting 3t to 6.1m or 1.3t to a maximum reach of 3.34m. With a modern, ergonomic, and stylish design this is still a compact machine at 4.78m in length, with a width of 2.13m. Powered by a 4-cylinder, 101hp Deutz engine mated to a M-Varioshift transmission this machine is productive, with a

Manitou, and sister company Gehl, will display a representative selection of machines from their very wide range of telehandlers, articulated loaders and tracked and wheeled skid-steer loaders. Manitou telehandlers are renowned for their performance, comfort, and costefficiency and the models on display at Lamma all prove the point. Just two are detailed here, but visit the Manitou Group stand to see the full selection on display. The new Manitou MLT 42060H, on show for the first time, is the smallest machine in the range weighing in at just 4.19t. This compact machine still packs a punch as it's able to lift 2t to 4.35m or 0.9t to a maximum reach of 2.65m. For maximum convenience and ease

wide range of attachment, comfortable with intuitive controls, and efficient in operation. The Gehl AL 650 articulated loader on display has a full turn tipping load (FTTL) of 2,779kg and a dump clearance height of 2.7m with a bucket. Gehl loaders give users state-of-the-art ergonomics, unsurpassed visibility, and ease of operation. The AL 650 has a multi-function joystick lever which controls the lift arm, bucket, float, travel direction, differential lock and auxiliary hydraulic functions. An inching pedal allows operators to vary the ground speed while maintaining a fixed engine speed, to optimally run attachments while enabling precise control. Engine speed can be conveniently controlled two ways, with the right foot throttle or with the convenient hand throttle, which also allows the ground speed to be controlled independently of engine speed. For traction and manoeuvrability in even the worst ground conditions, the 2-speed hydrostatic drive – which can be activated ‘on the go’ by a switch on the joystick and a differential lock, controlled with a button on the joystick – increases traction with 100 per cent effective engagement of axles. Hall 6, Stand 6.410

The Gehl AL 650 articulated loader.

Self-propelled

Spraytronic Simulator:

LAMMA Hall 9 Stand 9.452

Trailed

NEW for 2020 - Spraytronic Market leading spraying solutions for outstanding application quality and easy use & maintenance, saving you time and money.

01553 774997 www.berthoud.co.uk

January 2020 www.farmersguide.co.uk 101

Lamma 2020 pages 92-101.indd 101

10/12/2019 21:06

Preview

New range of grain driers Grain drying is a speciality for Perry of Oakley, and enormous expertise has developed the company into a leader in this field. Perry is world-renowned for manufacturing continuous flow grain driers, and has been successfully doing so since 1955, with Perry continuous

JTE

flow grain driers now in use in many countries across the world. The new Mistral range of grain driers is available with capacities from 5t/hour–30t/hour and all are suitable for a wide range of cereal crops including wheat, barley, oats and maize. Grain is elevated to the top of the drier column and enters the drier tower through the reserve section. When in full operation, the entire drying column is filled with grain; discharge of dried grain occurs via a roller discharge to provide a constant flow. This results in grain gradually working its way down the drying column, firstly in contact with hot air, then cooling air for the last 25-30 per cent of the column. The discharged grain is then both of the correct moisture content and temperature for long term storage. The design of the drier is such that the grain column is completely ledge-free, reducing dust and chaff residue. The tapered design of the air ducts promote even air flow and ensure uniform drying across the whole grain column. Stand 8, Hall 8.716

JOE TURNER EQUIPMENT

Meeting rising demands on potato growers Consumers increasingly have a wide range of choice when it comes to clean, freshly-packed potatoes of a certain size and shape on supermarket shelves. It is widely accepted that this is resulting in rising pressure on growers to supply the right potato in the right condition at the right time. As a result, manufacturers of handling and grading equipment have had to improve the output and efficiency of their equipment in order to remain competitive. This requirement for product quality, efficiency and value for money is why the leading OEMs and growers use Clifton Rubber components in their equipment, according to the company, which has been manufacturing agricultural wear parts for over 40 years. It has

See us at

also developed a range of rubber and polyurethane components that are suitable for the most demanding handling and grading environments, where efficiency and durability is key. Clifton Rubber’s latest product development is the cleaning coil, for use in various cleaning and grading applications such as grading units, box fillers and receiving hoppers. The company says the coils have been widely adopted by many manufacturers in the industry. Other products used in the handling and grading industry include sponge drying rings, cleaning stars, grading spools, grader clod rollers and pintle products such as pintle belts, encapsulated pintle and pintle rollers. Hall 8, Stand 8-9.104

Stand 18.312

PRODUCT RANGE › Hedgecutters › Firewood › Log Splitters › Agricultural › Forestry › Flails › Excavator Attachments › Firewood Grapple › Saw Attachments › Remote Control Mowers

PLUS...

68484

› Used Machinery › Rotor Balancing › Spares

NEW PRODUCTS

› Agriforest Log Grab

› Lipa HD Excavator Head

t 01789 763958 • f 01789 400330 • m 07836 589699 • e sales@joeturnerequipment.co.uk • www.joeturnerequipment.co.uk 102 www.farmersguide.co.uk January 2020

Lamma 2020 pages 102-111.indd 102

08/12/2019 17:10

68320

See us at

Hall 8 Stand 8.728

Flach & Le-Roy Ltd Flach & Le-Roy Ltd is an industry leader in designing and delivering high performance drying, ventilation & storage systems for crops & woodchip. Formed in 1993 its high quality product and design services include drive-on drying floors, air ducts, walling, fans, burners and associated control equipment delivered throughout the UK and overseas. A Flach & Le-Roy 4000 ton grain store with twin side air ducts, a drive-on drying floor and 8 x 27kw axial fans

FLR-CropDrying is a brand of Flach & Le-Roy Ltd

PRODUCTS Woodchip drive on drying floor driven by a 25hp centrifugal fan supporting a 200kw boiler drying G50/G30 woodchip from 40% to 25% moisture content. Onion or potato box store ventilation and conditioning air ducts. Fans can be mounted at the side or vertically on top of the duct.

A Flach & Le-Roy 2000 ton store with a central main air duct providing two flexible loading and storage areas

Timber clad store retaining-walling. Designed to be self-shedding for level or surcharge fill. Centrifugal and axial-flow fans, from low-pressure axial for drying vegetables to high pressure centrifugal and multi-stage axial fans for drying cereals and seed crops Control panels can be supplied with a wide range of safety and functional controls all protected by modern circuit breaker technology

Confidence in our design, materials and care in manufacturing and installation is reflected in our 10-year warranty

Flach & Le-Roy Ltd â&#x20AC;&#x201C; Crop/Woodchip Drying Systems Founded in 1993 by Richard Flach and Owen Le-Roy, together the partners have over 50 years experience in the crop drying and storage business. Their speciality is high quality drive-on flooring and box-store ventilation and conditioning systems. Based on the near-ambient drying method Flach & Le-Roy's drive-on floor drying system is fully automated, having fans and burners controlled via humidity sensors in the air duct and fan house. The drying rate for cereals is up to half a percent every 24 hours and the fans deliver air through the crop at between 20 and 24 feet per minute depending on stack height. Offloading the grain trailer into the store is time and labour saving and the crop needs no stirring. More recent application of the drying-floor system is the preparation of woodchip for biomass heating systems. Our system typically supports a 200Kw boiler drying 40 tonnes of woodchip at 1.5m deep from 40% to 25% moisture content over 2 to 3 days.

Flach & Le-Roy Ltd, Tel: 01480 495956 Mob: 07774 141512 enquiries @flruk.com

www.flr-cropdrying.com

January 2020 www.farmersguide.co.uk 103

Lamma 2020 pages 102-111.indd 103

06/12/2019 16:58

SEE US AT LAMMA 2020 HALL 9

+44 (0)1328 851111 PMCHARVESTERS.COM

67971

See us at

Hall 18 Stand 18.550

Setting new standards in fertiliser spreader performance and use In Spinning discs for Double, Double overlap precision with no striping . . weigh cell absolute accuracy with automatic tilt sensing to control actual rate . . GPS automatic headland on/off and stepless section control with Calibrator, Tablet or ISObus . . Variable rate ready . . . exclusive fast and thorough cleaning system.

Choose KRM for a spreader that WORKS! Find out more at . . . www.krm-ltd.co.uk

12 – 42m Spread Widths For Flexible finance – contact your KRM Dealer Tel: 01423 324221 E mail: info @krm-ltd.co.uk

104 www.farmersguide.co.uk January 2020

Lamma 2020 pages 102-111.indd 104

06/12/2019 16:59

The new Agri Air seeder from Vredo.

Preview

New UK handler for range of mobile grain driers

JC Machinery will be exhibiting the new Vredo Crop Drill System (CDS) at Lamma ’20. The well-known Vredo Agri Twin and Vredo Agri Air Series will be displayed with the new CDS feature. CDS enables the Vredo to sow arable crops directly on corn stubbles without any tillage at a 15cm row distance. The machine keeps its well-known features for grassland overseeding (7.5cm), making it the only machine that can

Vredo CDS distributor

overseed on grass and arable land. The base of the machine remains a pair of slicing discs with an interrow distance of 7.5cm. To allow arable crops to be sown deeper, every second pair of discs can be pulled up hydraulically, creating a sowing distance of 15cm. The seed distributors can be quickly diverted from 20 to 10 exits, to withhold the pulled-up elements from seed. Vredo has developed its own pneumatic seed hopper, which distributes very fine seeds or very large seeds to the seeding elements evenly. This system doesn’t cultivate the soil, it only slits the ground meaning less machine power is needed, which brings savings on fuel and allows you to work with one machine all year round. Hall 17, Stand 17.430

for ‘in-barn installations’. Danagri also offers a range of silos and intake pits to feed the driers. Hall 9, Stands 9.400 and 9.410

68679

New crop drill system at Lamma ‘20

The Esma range of Mobile Grain Driers will now be handled in the UK by Shropshire-based grain specialists Danagri-3S Ltd and will be displayed on its stand at the upcoming Lamma show. Esma machines have been sold in the UK for the past 10 years and have a reputation for strength and reliability, with several unique features to assist drying. Machines can be PTO, electric drive or dual operation and use the renowned Riello diesel burners. Capacities start at 9t and go up to their ES650F, 65t holding capacity flagship machine. The driers are available for both batch and/or continuous flow operation and are supplied with stainless steel screens, adjustable jacks, fuel tank and control panel – plus having a range of options including dust extraction, ejection cleaners, roofs and heat exchangers. Telescopic screen models offer complete mobility from farm to farm, while static models with fixed screens can be used

British Designed & Built

1950–2020

70 Years In Root Crops See us at

Stand 8.602

Tel: 01485 520355 • www.ctmrootcropsystems.co.uk January 2020 www.farmersguide.co.uk 105

Lamma 2020 pages 102-111.indd 105

09/12/2019 10:32

Preview

Diesel particulate filter cleaning service on-vehicle issues. The exhaust after-treatment system is designed to remove harmful particulate matter from diesel engine emissions. A vehicle fitted with any or all of these components must have fully efficient engine combustion and the ability to duplicate the required driving cycles, for the exhaust after treatment process to be successful. The express DPF cleaning service includes collection by either one of Colchester Fuel Injection’s fleet of vans or a courier, and full cleaning of the unit including a report and return delivery. The company also offers a ‘while you wait’ service for any DPF units delivered direct to its parts department. Its DPF cleaning machine provides the opportunity to offer a fully certified, costeffective solution for blocked DPF, DOC and SCR units. Colchester Fuel Injection is authorised by Original Equipment Manufacturers such as Bosch, Delphi Technologies, Denso, many more. Spald-FmGuide-hlf-0919_1.ps Stanadyne 13/8/19and13:20 Page 1 Hall 8, Stand 8.100 Colchester Fuel Injection offers a Diesel Particulate Filter (DPF) cleaning service on-site in Haven Road, Colchester. The cleaning service also includes Diesel Oxidising Catalysts (DOC) and Selective Catalytic Reduction (SCR) units. The service covers applications from passenger car, light commercial vehicle, truck, bus, plant and agricultural machinery. DPF, DOC and SCR are all components of the exhaust aftertreatment system, which differ from manufacturer to application. They can all become blocked, causing

Post driver to be stand star at show For over 10 years SPA Power Machinery has been the European distributor of the Australian-made Easy Petrol post driver. With the popular addition of the Westermann range of agriculture compact tractors and radial sweepers ,the family-run business is preparing for its largest ever indoor show at Lamma ‘20. Eight years ago, SPA Power Machinery began showcasing the Honda-powered post driver in small marquee tents at exhibitions around the country. In 2016 they were able to expand their horizons and invest in a custom-designed show trailer. Since then, their presence at shows has been phenomenal, with the addition of the Westermann range taking them to the next level.

Leading the way in the Westermann range is the chemical- and water-free Westermann Weed Ripper. Heading into the new year, the decision was made to take the indoor presence one step further. Commenting on the decision, exhibition organiser Mark Swift said: “We pride ourselves on selling quality and innovative machinery that solves problems. To best showcase this, we are always searching for ways to increase our presence before, during and after show days. Our 10m wide stand will be dedicated to both the Easy Petrol post driver and the Westermann Radialbesen, with a complete display of all the machines we stock here in the UK.” Hall 7, Stand 7.400

F IN A N C E DEALS A V A IL A B L E

TOUGH MULCHING SOLUTIONS

Please ask for full details

Forestry mulchers

- FRONT OR REAR MOUNTED AND OFFSET HEAVY DUTY MULCHING FLAIL TOPPERS - HIGH SPECIFICATION FORESTRY MULCHERS

Heavy duty mulchers

Exclusive to

SPALDINGS*

Offset mulchers

The most rugged and reliable machines •Constructed with the strongest materials and most advanced technical resources on the market, specially engineered for •With full parts and service backup a harsh and demanding environment

Call: 01522 507600 Visit: www.spaldings.co.uk facebook.com/spaldings.ltd | twitter.com/Spaldings

*TMC cancela – Exclusive to Spaldings in the UK & Ireland farming and groundcare industries

106 www.farmersguide.co.uk January 2020

Lamma 2020 pages 102-111.indd 106

06/12/2019 17:01

PREMIUM SLURRY HANDLING SOLUTIONS and low emission application units

VISIT US LAMMA AT 2 STAND 1 020! 7.660 HALL 17

Capacities from 1150 to 4000 gallons in a variety of configurations • Range of 7.5m retro-fit low emission dribble bar and trailing shoe spreading units. •

Call 01524 850501 or visit www.major-equipment.com

WE SUPPLY •

Flat bottom silos

•

Silo stirring systems

•

Hopper bottom silos

•

Mobile dryers

•

Tower dryers

•

Conveying systems

•

Westfield mobile augers

•

Fans

COMPLETE SOLUTIONS FOR GRAIN DRYING & STORAGE CONTACT John Statt M: 07703 608014 jst@sukup-eu.com

Sukup Europe Ltd Unit 2C, Gunby Lea Farm, Grangewood, Netherseal, Swadlincote DE12 8BE Phone: +44 1283 760445 www.sukup-eu.com

January 2020 www.farmersguide.co.uk 107

Lamma 2020 pages 102-111.indd 107

06/12/2019 17:02

NEED ACCESS IN TIGHT SPACES?

Safety and comfort a top priority for agricultural seats Finding the right seat for your agricultural vehicle is key for comfort and safety, according to TEK Seating. Some of the company’s range of seats will be showcased on its stand at Lamma, including the Sciox Super Seat from KAB Seating, which it says offers ‘top-of-the-range’ variable damping technology. A heater and mechanical lumbar are available as standard.

Also on display is the MSG85/721 Maximo Basic from Grammer – a mechanical seat suited to standard tractors, with a seat height that can be set in three steps via a locking mechanism. TEK Seating MD Paul Fleming, said: “Farmers and those in the agricultural industry work long hours, often in very difficult conditions, so it’s important that their seat is comfortable, reliable and correctly fitted to their body shape. Many seats these days protect the driver from vibrations, consequently helping to promote long term health benefits. “It’s important for operators to stay ahead of the game as new seats and modifications hit the market.” TEK Seating offers a choice of seats from manufacturers including KAB, Grammer, Milsco, Isringhausen and United Seats. It also offers parts and spares and a trim service. Hall 6, Stand 6.502 The Sciox Super Seat from KAB Seating offers ‘top-of-the-range’ variable damping technology.

Se 0 11

Alternatively, if your buget is tight, there is the TLE Range with simple controls but the same quality build, quality and reliability with a lift capacity of up to 1,200kg.

d an St

COMPACT AND MANOEUVRABLE IDEAL FOR BUILDINGS AND YARDS WHERE SPACE IS LIMITED Compact in size with all the accessories and specifications of the higher spec agricultural tractors, the 36-65hp TG tractors are ideal for easy access to cowsheds and use on dairy farms where space is limited. The rear, category 1&2, 3-point linkage has a lift capacity of up to 1,600kg, electronic shuttle with fingertip control and choice of HST or IQ Dual-Clutch transmission. The technology allows for easy operation even in the smallest of spaces, with less fatigue on the driver. A front loader joystick, draft control, up stop PTO and linkage lift in reverse are all supplied as standard.

8 ll Ha

SEE US AT LAMMA HALL 12 STAND 240

Did your drier let you down this harvest?

If so, then make sure you have it serviced ready for 2019

We have a huge range of burners & spares in stock Service of oil fired burners spares or repairs Alvan Blanch • Allmet • Carier Svegma • Farrell • Bentall Wilder • Vertec • Turner Tornum • Turbodan

24 Hour call out during Harvest

Contact your local dealer to book a demonstration today!

Servicing spares & repairs of all makes of oil fired grain drier Bespoke control panels designed & manufacture LED Potato chitting lights made to order NICEIC Approved contractor

ISEKI UK & IRELAND Tel 01473 599266 sales@iseki.co.uk www.iseki.co.uk

Enrolment No. 014923 68928

01621 828689 www.kjengineering.com

108 www.farmersguide.co.uk January 2020

Lamma 2020 pages 102-111.indd 108

11/12/2019 21:22

Preview

Tyre ranges for high power tractors and combines Tyre manufacturer Ceat Specialty has launched two new ranges of tyres for agricultural applications, aimed at the high-power tractor and combine segments. Each range features new design ideas designed to boost productivity. The full range will be on display at the Lamma show. The new Ceat Torquemax

range of high-power tractor tyres has been designed to provide low rolling resistance and to have a long working life, regardless of the field or road demands placed on it. According to the company, it has been engineered to ensure constant and smooth transfer of torque from the tractor to the ground – particularly during fieldwork. Key elements of Torquemax design include a new casing with stepped lug design and lower lug angle at the shoulder, to push you forward through the toughest soil conditions. In spite of its power, Ceat says the Torquemax cares for crops. The extra-wide footprint, along with rounded shoulder, ensures minimum soil compaction, with resulting yield gains possible from protection of crop, thereby raising productivity. The Torquemax range is also being launched in IF (Increased Flexion). The Torquemax IF tyres are designed to give 20 per cent The Torquemax range has been designed to provide low rolling resistance and to have a long working life.

The Yieldmax is designed to work as part of modern sustainable and precision farming by minimising the impact on the soil.

higher load-carrying capacity at the same pressure, compared to conventional radial tyres. Meanwhile, the Ceat Yieldmax is a new tyre for the harvester market, with a flexible radial carcass and deep tractive lugs that help provide high traction. It is designed to work as part of modern sustainable and precision farming by minimising the impact of harvesting on the soil. Key design features include interlug terracing at the base of the lugs, which helps to maximise the tyre’s self-cleaning capability. Durability is enhanced by a rounded lug base, designed to make the tyre more robust and resistant to stubble and sharp stones. These features also contribute to optimal lateral stability, even on difficult

www.scottsuk.com

and very uneven terrain, plus low vibration levels and high comfort in all working conditions. Available in 650/75 R 32 and 620/75 R 26 sizes, Ceat says the Yieldmax offers increased load capacity without necessitating a move to a wider tyre. Hall 18, Stand 18.656 69083

6000 What makes our 6 row haulm topper so versatile:  Front and rear mounted units give the perfect balance in both field and on the road  Shear plates to assist fine chopping of the haulm with choice of individual row or flat top bed deflectors  Replaceable ‘Hardox’ steel inner liner for hood protection  Heavy duty stub axles, wheel bearings and easy rolling oversize wheels

See us at Hall 8 Stand 9

 Greater variation in flail length to allow better flailing in the row bottoms with a steeply curved profile for maximum suction and prolonged wear life  Kevlar V belts increased to 5 belts per topper unit taking power transfer to a class leading 250hp  Floating parallelogram action on the rear units to allow each topper unit to freely move up and down over varying contours

Email: sales@scottsuk.com

Tel: +44 (0)1205 270128 January 2020 www.farmersguide.co.uk 109

Lamma 2020 pages 102-111.indd 109

06/12/2019 17:05

Preview

Flail head launches at Lamma

New lower-capacity model joins spreader range for 2020

The new flail unit gives users an alternative to the Razorback safety rotary head.

In addition to the new range of flail mowers launched earlier in 2019, British manufacturer Razorback will be launching a new flail head to accompany its Auto-Level 550 reach mower. Previously only available with a 1.5m rotary safety head, operators will now be able to choose between the flail and rotary option when ordering their Auto-Level reach mower. The 550 is the first in the range and features high specification throughout. With clever Co-Pilot technology, the Auto-Level lends a helping hand to the operator by ensuring the mainframe of the machine is always level – even when travelling across undulating terrain.

Norfolk-based muck spreader specialist, GT Bunning & Sons Ltd, is using Lamma ‘20 to unveil an addition to its Farmstar HBD spinning disc range, targeted at small- to medium-sized farms requiring a wider spread pattern than is possible with a vertical beater machine, particularly with materials such as chicken manure, gypsum and composts, as well as general farmyard manure. Designed as a light yet robust spreader capable of sustained workloads in conjunction with smaller tractors, the 8m3 model can be equipped with extension sides to increase heaped capacity to 10.2m3. Maximum payload is 8.5t. The new machine uses the same body and floor construction as the established Bunning TVA models, and blends this with a new design of HBD (horizontal beater and spinning disc) spreading mechanism, using the same spinning discs as those fitted to larger HBD models. This helps the new model to achieve the same spread patterns as the larger machines in the range.

Alongside reach mowing solutions, Razorback will exhibit their RT 500 rotary wing mower. Designed to produce immense uplift to cut longer residue with ease, the RT 500 matches the manufacturer’s other ranges in terms of quality and innovation. With a double skin chassis, full length removable skid shoes and top spec gearboxes and driveshafts, the machine has been built with durability in mind. Featuring a rear hitch, the mower can be paired with the Razorback residue harrow to stimulate stale seed beds and reinvigorate grassland in a single pass. Razorback’s range of flail mowers, which launched earlier in 2019, will also be on display at Lamma. According to the company, the range includes lightweight and reliable solutions for the compact tractor, right up to heavy duty offset machines for the agricultural and amenity industry. Hall 19, Stand 19.340

Design features include heattreated boron beater flighting and reversible boron beater blades, plus heavy-duty beater roller drive chains. Individual dynamic balancing of the beaters takes place after their production at the factory. Manufactured from Hardox steel, the 1m-diameter spinning discs feature adjustable blade angles. The new model is fitted as standard with a single axle rated to 13t, equipped with 406 x 120mm brakes with slack adjusters. Hall 6, Stand 6.718

A new 8m3 model joins the Bunning Farmstar HBD spinning disc spreader range for 2020.

NORAC Boom Height Control Systems available for select manufacturers The Beneﬁts of Boom Height Control

Reduce Operator Stress • Operators no longer have to continuously look at the boom • Allows operator to focus on drive path • Operator can go faster Cover More Acres • Work day and night – sensors do not need light to “see” • Take advantage of low wind conditions at night • Spray faster – no manual boom adjustments Other Beneﬁts/Features • Boom height control systems may offer other features such as Headlands Assist so that the boom can be automatically lifted and lowered at the end of the ﬁeld • Satisfaction guaranteed Derek Johnston +44 (0) 1228 580372 sales@precise-solutions.co.uk

Cote House, Wetheral Carlise, Cumbria CA4 8HZ

Maintain Proper Spray Tip Height • Increase application efﬁciency – get the most from your spray • Too low = Streaking • Too High = Drift Issues • Ensures chemical application is not wasted due to improper boom height Protect Sprayer From Damage • Accurate control • Avoid ground strikes • Prevents downtime from repairing bent booms and broken spray nozzels Hybrid Mode™ • An advanced crop sensing feature for in-crop spraying that eliminates the need for the operator to take manual Patented control of the boom in a row crops or adverse situations such as lodged, thin and uneven crop

Precise Solutions www.precise-solutions.co.uk

110 www.farmersguide.co.uk January 2020

Lamma 2020 pages 102-111.indd 110

06/12/2019 17:06

68432

r s t

Irrigation Ltd

The Irricentre, Sedge Fen, Lakenheath, Suffolk IP27 9LQ rstirrigation@googlemail.com

â&#x20AC;˘ Pumpsets manufactured in UK â&#x20AC;˘ Canopy or Open sets available â&#x20AC;˘ Mechanical or electronic EPU â&#x20AC;˘ Bunded fuel tank â&#x20AC;˘ Fuel anti-theft chamber â&#x20AC;˘ Auto prime option â&#x20AC;˘ Remote start/stop option

UK importer for Perrot Hosereels and Zimmatic Linear/Pivot systems â&#x20AC;˘ High quality hosereels â&#x20AC;˘ High performance turbine â&#x20AC;˘ In built strength through design â&#x20AC;˘ Easy to use â&#x20AC;˘ Variable rate irrigation option â&#x20AC;˘ Remote speed change available â&#x20AC;˘ Full Raindancer integration

UK importer and distributor for Raindancer irrigation management

E U R O P E

Donâ&#x20AC;&#x2122;t delay, call 01353 675265 & 01353 675313 Visit us at

Hall 20 Stand 426

www.rstirrigation.co.uk Monitoringâ&#x20AC;˘ Remote Control â&#x20AC;˘ Deployment â&#x20AC;˘ Planning & much more

We are the EXCLUSIVE UK Distributor and Importer for Raindancer Visit us at Lamma '20 Hall 20 stand 426

@Lamma: H20/S426

+44 1353 675 265

www.rstirrigation.co.uk

January 2020 www.farmersguide.co.uk 111

Lamma 2020 pages 102-111.indd 111

06/12/2019 17:06

Unique chance to try out stone and clod separator Farm Electronics is offering customers the chance to bring a sample of their pre-graded potatoes to its factory in Lincolnshire, so they can put it through the Samro stone and clod separator. The company has recently taken ownership of the machine from its parent company, Tolsma-Grisnich. The idea behind this machine is to remove stones and clods from a

Gold Medal for innovative E-Drive and AutoPowr system

batch of potatoes, onions and other root vegetables, with an accuracy of 95 per cent, the company says. There are three models available, offering capacities from 12–50t/hr. The machine can be incorporated into existing grading lines or as a one-off standalone unit, which means it is very versatile and could appeal to many growers as a low cost, high efficiency tool in their sorting operation, Farm Electronics explains. The product to be processed is either fed onto the supply belt of the separator by a transport conveyor belt (TG Samro 24 and TG Samro 44) or directly via a chute (TG Samro 72). From there, the product is transported towards the separation unit. A magnetic bar is fitted underneath the supply belt, which only polarises the clods and stones. Sensors then control pneumatic rams which eject the polarised clods and stones. The sensitivity of the sensors can be set separately. The clods and stones are removed by means of a transverse conveyor. Hall 8-9, Stand 8-9.214

The Joskin Group and John Deere took home the only Gold Medal awarded at Agritechnica 2019, for the E-Drive and AutoPowr system. John Deere, in co-operation with Joskin, has unveiled eAutoPowr, the world’s first continuously variable transmission with electromechanical power split, including an implement interface. The hydraulic components have been replaced with an electric power path. The two brushless motors are virtually wear-free and powertrain durability exceeds other concepts offered in the industry, according to John Deere. Other strengths include increased efficiency, very fine speed regulation, better acceleration behaviour and significantly lower maintenance costs. Meanwhile, Joskin now offers the ability to fit its range of transport vehicles with electrically-driven axles (E-Drive). As transported volumes and loads have increased, the traction on the road could not be significantly improved, the company says. Wider wheels became a necessity,

resulting in higher costs and lessthan-satisfactory traction increases. The addition of weights on tractors to improve grip became common practice but this led to high fuel consumption and, if loads are not properly distributed, some parts and tyres may wear prematurely. E-Drive distributes tractor power by transferring it to the whole tractor-trailer combination. By distributing tractor power on two extra axles, tractor traction is supported by that of the vehicle behind it and it is no longer necessary to increase weight on tractor axles. It is also possible to reduce the weight of the tractor and thereby ground compaction, fuel consumption and tyre wear. Visit the Joskin stand at Lamma to see 13 machines on display. Hall 12, Stand 12.670

BARN SYSTEM

5-year warranty * Visit us at Hall 8 Stand 8.700

*Manufacturer’s warranty on fans only.

01621 868 138 | fans@gibbonsgroup.co.uk | www.gibbonsgroup.co.uk Woodrolfe Road, Tollesbury, Maldon, Essex CM9 8RY

112 www.farmersguide.co.uk January 2020

Lamma 2020 pages 112-121.indd 112

06/12/2019 17:10

Preview

High spec purpose-built tanker to be at show

Hi-Spec tankers can be purpose-designed and built to meet the customer’s specific needs, and just such a tanker will be on display at Lamma ’20. minimum, the tanker has been fitted with a high capacity, hydraulically driven 14,000-litre Jurop pump and a side-mounted, hydraulically operated 8in autofill arm, complete with a turbo-fill system controlled from the cab. The tank, which is manufactured from 6mm thick British steel, is fitted with anti-implosion rings and baffles. For spreading, the customer opted for a Bomech 6.4 disc injector

for grassland. The injector is carried on a four-point linkage and over its 6.4m working width there are 32 outlets, supplied via a Vogelsang Exacut distributor with stonetrap. All hydraulic functions are operated via electro-hydraulic controls and the tanker has also been fitted with a Krohne flowmeter and a Tanlake DD slurry monitor for application rate monitoring and recording.

68976

The tanker is based on a Hi-Spec 4000 TD-S tanker, which has a capacity of 4,000-gallons. This comes as standard with a sprung drawbar and commercial 150x150 sprung parabolic tandem axles, complete with steering, which have been fitted with 710/50 R26.5 BKT tyres. The specification includes commercial air/hydraulic 420x180 brakes. To keep turnaround time to a

As a finishing touch, in order to match the customer’s tractor, the tanker has been painted in John Deere green, complete with yellow wheel rims. Hi-Spec will also be exhibiting a K40 Kompactor Push-Off trailer, the largest in the Kompactor range. The Kompactor features a hydraulically operated headboard powered by a triple hydraulic ram system, that can be used to compact material such as woodchip and grass or maize silage, so increasing the load carried by up to 40 per cent. Completing the display is a V12 vertical auger feeder. The Hi-Spec Vertical Auger feeder range comes in both single and twin auger variants with sizes from 7m3 up to 32m3. The range uses a low pitch mixing and chopping auger that creates a simple cycle action and is fitted with eight self-sharpening knives. A key feature is its ability to quickly and efficiently incorporate complete bales into the mix, due to the unique knife arrangement, which also allows the Vertical Auger mixer to be used with lower horsepower tractors. Hall 6, Stand 6.610

Inter Plant Weeder

or ut rib i st er Di p e ap UK siv Sp he clu for in t Ex

• Reduces reliance on chemicals to control weeds • Increases productivity • Reduces labour costs • Works in and around row crops inc pumpkins, rhubarb, Christmas trees, brussel sprouts • Available as 1, 2, 3 and 4 row machine

Hall 8 Stand 414

Call James on 07803 765440 • email james@jfhudson.co.uk • www.jfhudson.co.uk

January 2020 www.farmersguide.co.uk 113

Lamma 2020 pages 112-121.indd 113

06/12/2019 17:11

See us at Hall 20 Stand 20.718

Super Grab

The Heath Super Grab is a truly innovative solution to large bale handling A bale grab with a total‘free release system’ enables safer bale stacking and loading. Holding of the bales is provided by four uniquely designed Hardox tines. The Heath Super Grab is able to handle 1200mm x 1200mm x 2400mm, 1200mm x 900mm x 2400mm and 1200mm x 800mm x 2400min bales either vertical or horizontal in operation.

Super Spike The Heath Super Spike is a bale handling road safety transport in mind Built with strength to allow a 1.5 tonne carrying capacity, the tines fold away for safe road transport position, while the safety bale bar extends for safe bale handing.

68643

Newbridges Farm • Blackwell Shipston on Stour • Warwickshire CV36 4JX t: 01608 682062 e: info@heathengineering.co.uk

BRITISH STRENGTH IN COMBINATION WITH DUTCH FINE-TUNING

www.heathengineering.co.uk 68090

PROPANE-GLYCOL REFRIGERATION FOR BOX AND BULK STORES

Sustainable refrigeration equipment

Crop storage equipment for potatoes, onions and carrots

Intelligent climate control accessible by mobile devices

Intelligent climate control

Improving your agribusiness in an intelligent way Contact Alex or Adam on 01476 591592 or info@farmelec.co.uk

www.farmelec.co.uk

114 www.farmersguide.co.uk January 2020

Lamma 2020 pages 112-121.indd 114

06/12/2019 17:12

Preview

Looking after an increasingly valuable commodity Efficiency is key when it comes to gathering and storing straw, according to ProStraw Systems, which will be showcasing its innovative solutions at Lamma. Cereal straw has become an increasingly valuable commodity and has seen a recent surge in demand and versatility, according to AHDB. In addition to its traditional uses in the livestock sector, markets now also include renewable energy systems, overwinter carrot production and mushroom production. This increase in demand has seen a response in prices, with big bale straw prices hitting over £40/t more commonly in the past decade. With this in mind, East Angliabased company ProStraw Systems says efficiency is key when it comes to the process of gathering and storing straw. According to the company – which is an exclusive importer of the Parkland Agro-Master Bale Accumulator range – operating an accumulator in tandem with a baler allows you to drop bales in groups on the headland for easy collection, rather than scattering singles across the field.

The Parkland accumulators were designed with Controlled Traffic Farming in mind, so while they promise to reduce soil compaction, they can also significantly reduce labour and operating costs. In fact, ProStraw Systems says it is possible to halve the time it takes to get straw from field to stack. Protecting straw from water damage can be another challenge as it is not always possible or practical to store it indoors away from the elements. It is estimated that 10-15 per cent of straw produced in the UK each year is wasted due to water damage – and wet-wasted straw can cost farmers a minimum of £1,500 per stack. To combat this problem, ProStraw Systems has designed a unique bale sheet cover system that can be applied to any length of stack without workers having to leave the ground. This also helps to overcome health and safety

Harry West

challenges, as the potential risks of working at height are cited as a major reason for not covering stacks. The sheets provide a roofing cover to the bale stack, helping to maintain the quality of straw during

the worst of the winter weather. Both the ProStraw sheeting system and Parkland Bale Accumulator will be on display on the company’s stand at Lamma. Hall 6, Stand 6.802

Rear Discharge

68238

LED lights

The West Maelstrom Rear Discharge Range from 8m3 to 18m3 Standard features Wide angle PTO with clutch protection anchor chain with padless connection on every bar LED lights

adjuster

Options Electric in cab bed control Slurry door with light protection Mud guards

floor

Harry West (Prees) Ltd • office 01948 840465 • fax 01948 841055 • email sales@harrywest.co.uk • web www.harrywest.co.uk January 2020 www.farmersguide.co.uk 115

Lamma 2020 pages 112-121.indd 115

06/12/2019 17:15

AGRICULTURE AND ADVANCED TECHNOLOGY. Waiting for you in HALL 7

DEUTZ-FAHR always designs its products by carefully considering tomorrowâ&#x20AC;&#x2122;s challenges. This view allows the manufacturer to offer a full line of tractors and combines harvesters, with contemporary style, high levels of comfort, modern powerful engines and forward thinking features. Couple these factors with advanced precision farming systems and low operating costs; the result is to make DEUTZ-FAHR the perfect partner to increase the profitability of your business. Visit us in Hall 7 for more information.

deutz-fahr.com DEUTZ-FAHR is a brand of

Lamma 2020 pages 112-121.indd 116

06/12/2019 17:16

Preview

Special introductory prices for new Top Disc Cousins of Emneth Ltd are set to unveil the latest addition to their range of UK-designed and manufactured cultivation equipment, at Lamma ’20. The Top Disc is a linkage mounted, high speed compact disc harrow, fitted with the new Open Channel soil-to-soil roller, for fast and efficient cultivations. It features individually rubbermounted 510mm diameter discs and maintenance-free bearings. Open Channel rings are set

at 150mm centres with a 600mm diameter. Cousins offer 3m rigid, 4m and 5m folding working widths. The 3m machine is now available for a special introductory price which you can find out more about at the company’s stand (T&Cs apply). Managing director Laura Cousins says: “With this very competitive pricing available for a limited period only, we are expecting interest in this new product to be high.” Hall 12, Stand 12.680

Adam Lewis winning the ClubMzuri Strip Till Farmer of the Year award at Cereals 2019.

Sign up to ClubMzuri at Lamma Visitors to Mzuri’s stand will be able to sign up to ClubMzuri, a resource for benchmarking costs and sharing knowledge between growers who are established with the Mzuri system, those who are just starting out, and those who are looking to take the leap. The project was set up in 2018 to help Mzuri users get the most out of their system by recording and sharing establishment data and best practice techniques. From growers who have been strip tilling for years to those just starting out, the project provides a platform for

sharing knowledge and experience to further drive down costs and increase yields. Last year the manufacturer awarded Adam Lewis, a grower who has run the Mzuri system in Herefordshire for the last four years, the ClubMzuri Strip Till Farmer of the Year award for his approach to the system and keen focus on soil health – something at the heart of the company’s ethos. Visitors to the stand will also be able to see the versatile Pro-Til 3T Select single pass drill. Hall 19, Stand 19.340

See us at LAMMA 2020

With the new Vervaet Hydro Trike 5x5 and market-leading Q-616

J Riley Beet Harvesters (UK) Ltd halfdec19.indd 1

Lamma 2020 pages 112-121.indd 117

www.jrileyagri.co.uk Tel: 01603 262526

Church Farm, Attlebridge, Norwich NR9 5ST 17/11/2019 21:03:30

January 2020 www.farmersguide.co.uk 117

06/12/2019 17:17

Preview

Celebrating 15 years of business

Suffolk-based company GM-R Sprayers will be celebrating 15 years in business at Lamma ’20. The company was formed in 2005 by Graham Mitchell-Rowlands to manufacture trailed sprayers, using experience gained over a lifetime in the industry. The first sprayer was built in Suffolk and took on the style of the old Gem/Case models after receiving permission from Case. Graham says it soon became apparent that to get into the market with numbers, the company would need to outsource manufacturing with proper production and quality control. In 2006, it partnered with

a manufacturer in Slovakia that specialises in sprayers and booms up to 36m wide. Initially, all components were shipped from England and the partner company did the fabrication and assembly work. More recently, sprayers have come in as a whole product, with GM-R Sprayers doing the final quality control preparation and installation of GPS controllers to customer requirements. In 2010, the company introduced the first GM-R Fieldcruiser selfpropelled sprayer, with the chassis built in the UK and the demount sprayer assembled at company headquarters in Stowmarket. At Lamma ’20, the company will display its latest trailed sprayer with three-stage fold 24m boom and 3,600-litre tank. The range extends to 6,000-litre and 36m booms with Isobus connectivity. Hall 9, Stand 9.600

THE PROFESSIONAL DRAINJETTER From a typical basic model all these options can be built into your new Jetter ■ ■ ■ ■ ■ ■ ■ ■ ■

Up to 600 metres on narrow drum, hydraulic motor driven Hydraulic drive mechanism with twin motors for power Hydraulic unfolding in and out of the guide arm Hydraulic slew of the guide arm left and right Six function hand held wireless control, including water control ARS automatic repeat Roding system Automatic distance counter set the distance to travel and return 100 metre 50 bar water driven jetter for yard drains and washing Toolbox , spade and ladder

See us at

Hall 9 • Stand 9.600

www.drainjetter.co.uk

Mitchell-Rowlands

Holybush Farm Buxhall Stowmarket IP14 3DP Tel

01449 736300 or 07860 618903

GM-R SPRAYERS LTD

69142

rs Celebrating 15 Yres aLtd of GM-R Spraye

Engineered for Today’s Farming

2 YEAR

WARR AN T&Cs ap

ply

NEW GX-TRAIL CROPSPRAYER WITH ALL THE DESIGN FEATURES OVER 15 YEARS

Polyethylene easy clean tanks 3600-6000 • Air Ride suspension in all triple fold booms from 24m Air Ride suspension on steering axles across the range • Dual air hydraulic brakes Gyro auto steer no linkage connection between tractors • High and low hitch drawbars for excellent crop clearance Smart terminal with joystick • Plus ISObus connection • Auto GPS control up to twelve boom sections

GM-R SPRAYERS LTD

tel: 01449 737482

Holly Bush Farm, Buxhall, Stowmarket, Suffolk IP14 3DP

63890

www.gm-rsprayers.co.uk email: info@gm-rsprayers.co.uk

118 www.farmersguide.co.uk January 2020

Lamma 2020 pages 112-121.indd 118

10/12/2019 21:09

New range of high-performance parts on display Farm parts specialist Pan Anglia will display a number of new products at Lamma 2020, including some of its Performa range, which is engineered with highperformance treatments to deliver outstanding wear life, according to the company. Pan Anglia will be joined by its partners from Boehlerit, Austria, who have engineered a unique tungsten tiling process that utilises a series of discs spread over the

part, ensuring that width and bolt protection is maintained over the greatly extended wear life. The company will also display examples of its range of root harvester parts and its team of specialists we will be on-hand to answer questions. They will be joined by partners from Dutch manufacturer Broekema. As genuine Walterscheid, Comer and Bondioli Pavesi agents, Pan Anglia will also exhibit a selection

of its PTO stocks and will be on hand to answer any technical enquiries from potential customers at the show. With in-house PTO experts, the company says it can build and repair almost any specification PTO. Hall 7, Stand 7.924

67880

High Tip Buckets

Grain Pushers

Buckrakes

Hydraulic Folding Forks See us at

Specialists in Loading Shovel Attachments barry@bacaulkett.com Tel: 01440

706429 Fax: 01440 713397 www.bacaulkett.com

Hall 20 Stand 20.350

 

See us at



See us at Hall 20 Stand 20.418

Hall 19 Stand 19.446



 .01778 342642 e.@.

68936

68349

January 2020 www.farmersguide.co.uk 119

Lamma 2020 pages 112-121.indd 119

06/12/2019 17:18

Preview

Limited Q-Series bale wrapper on display Displayed on Tanco Autowrap’s Lamma ’20 stand will be the new Q-Series linkage-mounted square and round bale wrapper, of which a limited number will be available in the UK for 2020. The Q-Series features: 200mm-longer rollers to accommodate longer bales than the 1540-EH; telescopic cut and start; proportional hydraulics; a more compact chassis; direct gear drive of the satellite arms; fully automatic operation (auto load, auto start, auto bale level and auto unload); and

Expert 2 controller. Plus, the machine will be available with either two or three wrap arms. The very popular 1540-EH linkage- or loader-mounted square and round bale wrapper will also feature on Tanco’s stand. This machine has been proven over many

25th ANNIVERSARY 1994-2019

seasons to be very versatile, efficient, reliable and robust and is in use across the UK on all bale sizes. The high output 1400-V trailed round bale satellite wrapper, which will also be on display, is designed and built on the speed, reliability, ease of operation and high output experienced by operators of the 1400-EH. The patented split table of the 1400, which was designed to allow simultaneous wrapped bale unloading and next bale reloading, is retained on the 1400-V, and enhanced with the addition of auto-loading. The 1400-V shares innovative features such as Tanco’s ultra reliable telescopic cut and starts, direct gear drive to the satellite arms and a variable proportional hydraulic system with the S and the Q series linkage/loader wrappers which Tanco will also have on display at Lamma ‘20. The A-100EH trailed turntable round bale wrapper shares with the 1400-V the same innovative chassis concept of having the axle at the rear of the machine, allowing transfer The new Q-series bale wrapper.

The 1400-V satellite bale wrapper.

of weight to the tractor. This makes the wrapper very stable on hills and, combined with large 31x15.5-15 tyres as standard, the ability to travel very well on wet ground. Other features the A-100EH shares with the 1400-V are autoload and the capability to unload on the move. Also on show for anyone feeding root crops or silage will be the I-60 Cleanafeed root crop washer/cleaner and feeder (available in three-point linkage and loader versions); the I-73 bale shear for feeding bales whilst keeping hold of the bale wrap and net; and the I-75 multi shear for feeding pit silage and bales in the same way as the I-73 bale shear. Hall 19, Stand 19.236

25th ANNIVERSARY 1994-2019

120 www.farmersguide.co.uk January 2020

Lamma 2020 pages 112-121.indd 120

06/12/2019 17:24

See us at Hall 18 Stand 18.650

New branding to support growth plans One of the biggest British manufacturers of farming machinery, Ktwo, has undergone a brand overhaul and reveals its new logo and styling to support their future business plans. Ktwo marketing manager, Zoe Chamberlain, explains: ‘’Our new logo and styling marks a significant milestone in our journey and has given us the opportunity to reflect on everything we stand for and everything we aspire to be. Our vision is to become the market leader of muck spreaders and trailers across the UK, and to grow worldwide. We want our brand to showcase our vision better and take us boldly into the future. The Ktwo name is well-known and trusted in the industry. We didn’t want to change our name but instead give it a facelift with a new modern and clear typography and colour pallet. Our new branding will focus on our values of providing excellent customer service, innovation and build quality.’’ Since being founded in 1988, Ktwo has achieved tremendous growth year-on-year through its innovative approach and high-

quality manufacturing of muck spreaders and trailers. The manufacture of its Roadeo Compact and Push Trailer – hailed the next generation of trailer due to its unique design which achieved up to 40 per cent additional compaction – has marked its place as the leading ejector trailer and further elevated the Ktwo name in the agricultural market. Ktwo saw rapid growth in 2019 with the acquisition of Warwick Trailers increasing its factory capacity and a solid investment in strengthening its brand name. The company will be showcasing its new branding at Lamma ‘20 and offering a prize draw to win eight weeks’ hire of the Roadeo Compact and Push Trailer for harvest 2020. Visit the Ktwo stand to find out more. Look out for the new branding across the Ktwo website and social media in the coming weeks. Hall 12, Stand 12.410

THERMOBILE offers probably the most complete selection of space heaters available to the UK Agricultural Trade. The full range of heaters from THERMOBILE now comprises over 300 models varying in heat output from 3Kw up to 450Kw (10,000 to 1,500,000 BTU/HR). • Erp 2018 compliant • Oil and gas fired cabinet heaters • Universal bio oil fired heaters • Suspended oil and gas • Electric heaters • Portable and mobile heaters For more information contact us at

67391

THERMOBILE UK LIMITED

12 Buckingham Close, Bermuda Industrial Estate, Nuneaton, Warwickshire CV10 7JT SALES CONTACTS: Andy Wallis 07850 988382 andy@thermobile.co.uk John Hall 07775 635527 john@thermobile.co.uk

Ktwo is offering Lamma ‘20 visitors a chance to win eight weeks’ hire of a Roadeo trailer

OFFICE: 02346 357960 www.thermobile.co.uk January 2020 www.farmersguide.co.uk 121

Lamma 2020 pages 112-121.indd 121

06/12/2019 17:25

Preview

Chance to win M18 compact impact wrench Robustrack is offering Lamma visitors a chance to win a Milwaukee M18 FUEL ½in Compact Impact Wrench, which is One-Key enabled and wirelessly connects to a smartphone to provide unlimited customisation and control of the tool’s performance. The company will also be displaying its extensive range of attachments for excavators, telehandlers and skidsteers. Making a special appearance will be the ‘big boy’ forestry mulcher LS7, which has options for standard hammer blades, forestry rotor or forestry rotor with fixed teeth. Both the LS7 and LS8 (forestry rotor with fixed teeth) are for intensive use on heavy equipment. Elsewhere on the stand visitors will be able to see flail mowers, forestry mulchers, concrete mixing buckets, pole drivers, compaction

plates, ramps and log grabs. Contractor/farmer Martin Bond, who bought his flail mower to cut hedges and clear brush and gorse, says: “The LS3-800 flail for my JCB 803 is indestructible! With it I’ve been able to take on more contracts and increased my productivity.” Each flail mower head can be supplied with a two-pin mounting bracket or a quick hitch mounting bracket. All attachments come with a 12-month warranty. Hall 20, Stand 20.570

Unusual weather delays mole draining and sub-soiling At the time of writing in midNovember, land drainage contractors Miles Drainage said their thoughts go out to farmers and land owners in the South Yorkshire area, following recent heavy rain and flooding. In East Anglia, where the company is based, the dry spring meant that 2019 was quieter than average for its land drainage teams, although the company has been busy on drainage schemes for cable and water projects in both Cumbria and Somerset, as well as for its agricultural customers. The rainfall in early October brought an early finish to both the mole draining and sub-soiling season, with works being postponed until 2020. The company continues to be busy installing fibre broadband in both the towns and countryside throughout East Anglia and beyond.

For those suffering from poor internet service, the company says it may be able to broker a deal. The broadband supplier may supply the ducting and cables, while the business or home owner finances the installation. As a utility approved contractor, the company operates both tracked and wheeled trenchless plows, capable of installing cable and duct up to 1m deep, with minimal disturbance to the ground surface. Miles Drainage operates nationwide and, in addition to utility work, it provides a GPS-based quality land drainage design and installation service to agricultural, equestrian and sports field customers. The company also manufactures and sells the Single Leg Mole Plough, supplying both spares and wearing parts. Hall 12, Stand 12.250

122 www.farmersguide.co.uk January 2020

Lamma 2020 pages 122-132.indd 122

10/12/2019 21:12

Have you got your Christmas covered?

Less waste means more money...

Protect the quality and value of your straw in all weathers with a PROSTRAW STACK SHEET. H&S Approved mechanical fitting available. From £1,550

The Parkland Agro-Master Bale Accumulator is an efficient way to reduce fuel, labour and machinery costs whilst minimising compaction with a controlled traffic system

PRICE E Z E E R F 19 0 ON ALL 2

ULATOstRS ACCUM e stocks la whil

*Terms & conditions apply

PJ Reed SPECIAL OFFER

0% FINANCE on all new machines* See us at

Want to ensure your straw is stored in great condition?

The Martin Lishman Balemaster Protimeter is a handheld digital meter and a 600mm probe that allows you to measure the moisture within your bales.

For a limited time only, you can purchase a Balemaster Protimeter for the unbelievable price of £295+VAT (RRP £335+VAT). Contact us for more details

PJ Reed would like to wish all their customers a very Merry Christmas and a Happy New Year

Hall 6 Stand 802

Have you accumulated your presents yet? Contract baling services

120x90/4x3/midi baler with Parkland bale accumulator 120x130/4x4/Hesston baler with Parkland bale accumulator

68881

For further information please contact Paddy 07768 353910 or Will 07828 730712 Email admin@prostrawsystems.co.uk • Website www.prostrawsystems.co.uk

January 2020 www.farmersguide.co.uk 123

Lamma 2020 pages 122-132.indd 123

08/12/2019 14:04

Preview

Austrian-made front loaders and attachments For more than 50 years, Hauer has been developing and manufacturing front loaders, front linkages and a wide range of attachments in Austria. State-ofthe-art technology and many years of experience are the basis for the traditionally high quality Hauer products. The worldwide unique Hauer XB Bionic front loaders with parallel guidance and tilting cylinders inside the loader arms are well proven under toughest alpine conditions. The robust and well-protected front loaders are available on nearly all tractors up to 400hp.

Hauer implements stand out for their exceptional longevity and value for money. The use of proper and top-quality materials, in combination with the right design and a countless number of small details, is instrumental in the manufacture of attachments for the agricultural and forestry industries. Furthermore, perfect welds applied in a perfect position by robotic systems guarantee a long service life and an optimum operating weight. Finally, Hauer attachments are touched up by a two-component paint finish that is dried by heated air to give effective protection from corrosion for many years to come. Attachments come in the standard Hauer orange and matt black livery; special colour schemes are available on request. Hall 19, Stand 19.616

r-l: Ian Scudamore, Mark Donsworth, Lea Ball, Nigel Pedric, Chris Gotts.

Extensive range of wear parts and tools heads to Lamma Agricultural and engineering specialist MDT is launching a Triple Filter System at Lamma 2020, to alleviate troublesome fuel issues that many have experienced this year. The company will showcase its extensive range of wear parts, both genuine and non-genuine, at the show, as well as tungsten carbide options, ceramic and hard-coated products. The company says it will be providing “superb show offers” on Sealey Tools. Action Can spray lubricants will also feature with a demonstration booth, and Kielder Tools are set to exhibit their Power tools, while Banjo display highquality pumps and fittings. Offers from MDT’s long-term partner

Hats off to Bomford!

Take a photo of you in your cap, post it on social media tagging us using @BomfordTurner and #hatsofftobomford including the location.

See us at Lamma 2020

Stand 20.430

We will then choose the photo taken the furthest from our factory and the winner will get:

10% off their next purchase Let’s take Bomford around the world!

Proven Landscape Technology

Visit us at Lamma 2020 and get your FREE Bomford Turner Baseball Cap.

Kramp will be available, together with a display of MDT Online – the direct parts ordering service that gives registered users access to over 500,000 products at the touch of a button. MDT says its business has continued to grow from strength to strength, maintaining its ethos of quality products, exceptional customer service and value for money. The company is proud to provide an experienced and knowledgeable service to individual farmers and national buying groups alike, and welcomes visitors to its stand at Lamma, where the full sales team can discuss requirements and offer cost effective solutions. Hall 17, Stand 17.650

Tel +44 (0) 1789 773383 E-mail info@bomford-turner.com Website www.bomford-turner.com

124 www.farmersguide.co.uk January 2020

Lamma 2020 pages 122-132.indd 124

08/12/2019 14:05

Registration now open!

Join the LAMMA Buzz LAMMA is a great shop window for visitors to view and purchase the latest machinery and innovations showcased by our exhibitors, as no other event in the UK offers LAMMAâ&#x20AC;&#x2122;s scope of agricultural machinery, technology and innovation in one place.

Over 700 exhibitors - the 11 halls will be packed with exhibitors introducing ground-breaking innovations to the market.

CMY

Farming 4.0 Zone - a look at tomorrowâ&#x20AC;&#x2122;s farming and how technology will help sustain the

future of food production

Farm Safety Zone - will assess and improve your on-farm safety, sponsored by Safety Revolution

Innovation Trail - follow the Innovation Trail, showcasing award-winning exhibitors and their products

CPD points - Collect BASiS, DairyPro & NRoSO points on each day of the event Impressed @lammashow today. Lots of kit and farmers. I always felt when our industry lost Smithfield and The Royal we lost more than the events themselves. It was good to witness what felt like a statement of faith in the future of UK ag at the NEC Guy Smith, NFU Vice-President & Essex Farmer

Registration now open! Register for your free ticket at www.lammashow.com Sponsors

Partners

January 2020 www.farmersguide.co.uk 125

Lamma 2020 pages 122-132.indd 125

08/12/2019 14:05

WATER WHEN & HOW YOUR CROPS NEED IT •

Booms for lane widths 10 - 96 metres

•

Exactly the right hosereel for your farm

•

Advanced, JCB-engined, silenced pumpsets

•

Systems for dirty water and digestate

•

Raindancer remote monitoring and control

•

Water-saving tied ridger

•

Fixtures, fittings, pipework and more...

Lowlander ® Manure Spreaders 3 Year Warranty | Details available upon request

Twin Vertical Auger TVA | 6 – 40 tonnes

Horizontal Beater & Spinning Disc HBD | 8 – 40 tonnes Tel: + 44 (0) 1362 860352

www.gtbunning.co.uk

See us at LAMMA Hall 6 - stand 6.714 visit our website: briggsirrigation.co.uk call us on 01536 260338 or email: enquiries@briggsirrigation.co.uk

bunning spreaders

68227

Tey Farm Systems Limited Telephone: 01206 210003 Fax: 01206 212880 Great Tey Business Centre Warrens Farm, Great Tey sales@teyfarmsystems.co.uk COLCHESTER CO6 1JG www.teyfarmsystems.co.uk

Tey Farm Systems

teyfar msystems.co.uk

Storage, drying, handling and buildings for cereals, root crops and more...

Design Supply Install Maintain all types of Crop Storage, Drying and Handling

Come and see us at

Hall 8 Stand 8.410

126 www.farmersguide.co.uk January 2020

Lamma 2020 pages 122-132.indd 126

08/12/2019 14:06

Preview

Innovative irrigation products on display at Lamma Agricultural irrigation company Euromacchine will display a range of products at Lamma ’20, including Lampo Solar – the evolution of its multi-functional unit Lampo, which can be used simultaneously as a generator and irrigation pump station. It has the ability to vary flow rates and pressure through an onboard inverter. Lampo Solar includes solar panels

to reduce power absorption through the engine and therefore achieve a reduction in fuel consumption. It can also be connected to an existing solar panel park to run the pump from 100 per cent solar energy. The company will also display its no-radiator pump unit. Installing a heat exchanger inside the Supertank priming system allows the engine

Lampo Solar includes solar panels to reduce power absorption through the engine.

to cool without a radiator. Benefits include less fuel consumption, noise reduction, a more compact unit, reduced environmental pollution and lower maintenance costs. Completing its suite of products on-stand at Lamma is Euromacchine’s self-cleaning rotating filter, which reliably delivers filtered water from as little as four inches in depth. The

company says it is the ideal solution for abstraction from reservoir, river or canal water sources, for standard and drip irrigation. Riverscreen is built for shallow water pumping, prevents sand problems and is a ‘fish-friendly’ product, meaning it helps to protect the environment by preventing damage to eels and marine fauna. Hall 20, Stand 20.780

Installing a heat exchanger inside the Supertank priming system allows the engine to cool without a radiator.

Hall 8 • Stand 8.104

68771

January 2020 www.farmersguide.co.uk 127

Lamma 2020 pages 122-132.indd 127

08/12/2019 14:06

Electric loader and more in showcase Schaffer heads to Lamma ’20 to showcase new developments across its ranges, including the UK debut of the Schaffer 23e: the world’s first compact loader with lithium-ion technology and a top speed of 20kph.

The Schaffer 23e is the world’s first yard loader with lithium-ion technology and a top speed of 20kph.

The new electric compact loader 23e from Schaffer delivers emission-free operation – exhaust gases and noise are now a thing of the past. This is a significant advantage in sectors such as the indoor livestock business. Customers can choose between two lithium-ion battery packs. With the standard battery system (6.7kWh), the loader is well equipped for most farm work. With the help of the power battery system (13.4kWh), the operating time of the loader doubles to several hours. The power battery system can be retro-fitted at any time. Schaffer guarantees a running time of 5,000 charging processes or five years of operation, whichever comes first. Friedhelm Brede, head of development at Schaffer, says: “Thanks to the pioneering technology, we can guarantee this long battery life. Lithium-ion batteries are maintenance-free, there is no danger of lead or sulphuric acid and the 23e works reliably even at low temperatures.” In addition, the use of an electric loader with lithium-ion technology

brings significant savings. “The 23e’s maintenance requirements are significantly lower than those of the diesel model,“ Friedhelm adds. “Much higher efficiency and lower energy costs per hour of operation result in additional savings potential.” Also on display are the best-selling Schaffer 8620 T, exhibiting with the latest 136hp engine, and the Schaffer 6680 T with new style cabin and new standard wheel option. With a wealth of options, including three different motor options, two speeds and two heights, the 8620 T provides a tailored solution for larger farms, biogas plants and agricultural contractors. It is packed with many of Schaffer’s latest smart technologies developed for lower fuel consumption, reduced maintenance, increased comfort and eco-friendliness. The Schaffer 6680 T is the most compact loader in the professional class, but packed with features and now equipped with the SCV-Plus cabin, setting new standards for driving ergonomics, space and allround visibility. Another recent update is a new standard wheel option of 400/70-20 AS. Hall 18, Stand 18.604

A successful harvest starts in spring GRIMME looks forward to welcoming you to LAMMA 2020 where we are showcasing the latest developments in Spring technologies to help you lay the foundations for a successful harvest.

GRIMME UK Ltd. Station Road, Swineshead, Boston, Lincolnshire. PE20 3PS.

www.grimme.co.uk T: 01205 822300

128 www.farmersguide.co.uk January 2020

Lamma 2020 pages 122-132.indd 128

08/12/2019 14:07

Preview

Quality buildings at sensible prices It is often difficult to find quality buildings at decent prices – largely because the two objectives are usually incompatible. For more than 70 years, Browns of Wem has specialised in the design and construction of steel- and timber-framed buildings which stand the test of time and work hard for their value. Browns has built a vast array of buildings ranging from small gardens sheds to 5,000t grain stores. Browns buildings can be seen across the UK and Channel Islands – serving many clients from all sectors of the

agricultural, equestrian, commercial and leisure industries. A family-owned company based in North Shropshire, Browns of Wem prides itself on understanding exactly what makes agricultural and equestrian buildings work. “Careful design, close liaison with local planning authorities and the best attention to detail along with the highest standards of manufacture and installation are what we aim for,” says Browns of Wem director Neil Jefferies. “Our team of experts can advise on what suits your requirements and offer ideas for design and

materials accordingly. Whatever issues may arise, Browns can offer cost-effective solutions to ensure your building works hard for its money, in harmony with the landscape and the surrounding environment,” he adds.

Whether you are considering a new agricultural building, extending existing storage or simply a loose box or garden store, visit Browns of Wem at Lamma for advice. Hall 20, Stand 20.786

New entrant in agricultural rubber track market Global Track Warehouse (GTW) is fast becoming an accepted supplier in the UK’s agricultural rubber track market, since it began supplying the industry in early 2018. GTW already had more than 20 years’ experience in the industrial track market, prior to moving into agriculture. It uses premium rubber compounds to extend track life. Wide and deep tread lugs are designed to offer

increased traction and better mud release, while decreasing track cutting, ground disturbance and vibrations. The company says its joint-less technology and one-step vulcanisation of the tread bars, drive lugs and track carcass results in increased adhesion strength and minimises tearing of the bars/lugs. It also has an improved heavy-duty, four-layer internal cable system to reduce punctures, abrasions and

carcass distortion. According to GTW, its 6.5mm high-tensile main cables exceed the requirements of modern highhorsepower machinery and greatly increase tear resistance. Increased flotation and decreased compaction allow the machine to work in wet soil conditions, while increased ground power results in lower fuel usage, lower vibration and the ability to use larger attachments.

The company currently stocks a wide range of tracks for Case IH, Challenger, Caterpillar, John Deere and New Holland, with many more models currently in production. There’s a four-year warranty on friction-drive machines and two years on those with positive drive. Over 250 tracks are stocked in the UK for many models, with next day or same day collection if needed. Hall 20, Stand 20.102

YOUR TRUSTED SOURCE FOR AGRICULTURAL MACHINERY

DISCOVER SOLUTIONS FOR ALL YOUR POTATO MACHINERY AT THE LAMMA SHOW, STAND 8.814

INNOVATIVE ECONOMICAL RELIABLE ENJOYABLE

One contact for all your questions: Michael Gott T. 07769681976

January 2020 www.farmersguide.co.uk 129

Lamma 2020 pages 122-132.indd 129

08/12/2019 14:07

No.

UK COMPACTOR TRAILER

DESIGNED TO PERFORM BUILT TO LAST

MAXIMISE YOUR EFFICIENCY WITH THE NEXT GENERATION OF TRAILER The Ktwo Roadeo Compact & Push Trailer â&#x20AC;&#x201C; up to 40% extra capacity through compaction.

www.ktwo.co.uk +44 (0)1844 299290

130 www.farmersguide.co.uk January 2020

Lamma 2020 pages 122-132.indd 130

08/12/2019 14:08

Preview

Introduction to low emission slurry application system 30 outlets spaced 260mm apart for even and precise distribution of liquid material. They are easily mounted onto the back door of a vacuum tank without welding or fabricating, making them ideal for retro-fitting. Brackets with settings in 60mm increments allow either unit to be set according to the tanker height, making the system completely adaptable to any tanker make or model. They can also be used with the existing splashplate left in place. A Vogelsang ExaCut macerator is centred on both units to deliver optimal cutting results and eliminate

Major Equipment (Intl) Ltd is returning to Lamma with an exciting lineup of machinery for the progressive farming operation. The multi-award winning manufacturer of agricultural machinery is showcasing its own dedicated low-emission slurry application systems. The new 7.5m dribble bar and trailing shoe applicators feature a universal adaptor with adjustable height for maximum flexibility and improved flow. The Major applicators are designed to apply slurry to the soil surface as accurately as possible while minimising nutrient loss and ammonia emissions. Both units have

blockages. Made of high-strength steel and galvanised, the slurry spreaders are built to endure working in a caustic environment. For safe and legal road use, a full lighting

board is fitted as standard. There is a double self-aligning pivot hinge with easy access grease point on each wing for increased durability. Hall 17, Stand 17.660

New Windrower launches as companies partner up De Jongh, and the newly added Brettmeister, growers can now access the following specialist machinery brands through their usual area sales managers: Bassi & Bassi, Ferrari, Forigo, Hoaf, Imants, Ortomec and ARC. Standen says these brands are at the forefront of innovation in their sectors and also produce machinery to UK grower requirements – including bespoke requirements.

Machinery company Standen has announced a new mutual working relationship with Salmac Ltd, specialists in the sales and import of specialist salad and vegetable machinery. As a result, Standen says it can now offer a broader range of specialist planting, cultivation and harvesting machinery for UK salad and vegetable growers. In addition to Baselier, Simon,

HARDCASTLE VENTACROP LTD CROP STORAGE SPECIALIST

Standen is also launching a new Windrower at Lamma ’20, in response to increasing grower demand for better harvesting output, without investing in a larger self-propelled harvester, or an additional harvesting labour team. Windrowing virtually doubles output by lifting and dropping potatoes into the neighbouring row, the company says. Growers then only

need to use one trailed harvester to lift and clean two beds-worth of potatoes in one pass. Sales and marketing director Ed Gilbert said of the launch: “We are very excited to be using Lamma ’20 as the platform for launching our new Windrower. It’ll be on stand ready to show growers around the machine and to answer any questions.” Hall 8, Stand 8.824

Stand 7.400

Hardcastle Ventacrop are specialists in the manufacture and installation of Hardwood Main Air Ducts and Hardwood Drive-over Drying Floors. Our proven design, 30 years of experience and the use of quality materials makes us the No.1 choice for Grain and Potato Storage. Hardcastle Ventacrop provides a full design, planning and installation service for all Crop Storage Systems.

Visit our website: www.hardcastleventacrop.co.uk To avoid disappointment contact us now

email: hvc2000@aol.com

Sales: 07970 029 240

68270

Office: 01377 254257

0114 269 9119 www.petrolpostdriver.com January 2020 www.farmersguide.co.uk 131

Lamma 2020 pages 122-132.indd 131

08/12/2019 14:08

Preview

Keeping farm workers safe Farming is a hazardous industry – in fact, the agriculture industry has been identified as one of the most dangerous to work in altogether. Farm workers and farmers work with potentially dangerous machinery, vehicles, chemicals, livestock, at height or near pits and silos. They are exposed to the effects of bad weather, noise and dust. The risks also extend to family members working at the farm and children living at the farm. The most common cause of death relates to transport – being struck by moving vehicles. With Trailer Vision’s new vision

solution, Agri-Vue, customers could save both time and workers’ lives. Featuring two semi-automatic pairing cameras, both of which are graded IP68 for water resistance and are encased in a durable steel shell, the system allows drivers and machinery operators to keep an eye on two things at once. This is accomplished via a splitscreen view on the included 7in monitor. Split-screen can be utilised for keeping an eye on loads, while reversing or navigating through enclosed areas and/or checking on harvesting equipment. Individual camera full screen views are also

available for when a task needs your undivided attention. In addition, each camera has a built-in microphone and is interference-free, with a range of

up to 100m. This ensures there will be no dropped connections when you need to know what is going on around you. Hall 6, Stand 6.710

What are the benefits of opting for contract hire? Contract hire can offer you all the benefits of having new equipment, without worrying about maintenance and repair costs, or having to come up with large upfront costs. This is according to Contract Plant Rental, which says hiring equipment could even work out cheaper than a finance lease. For example, if you bought an excavator for £100,000, a finance

lease would be structured to pay off the whole amount, plus interest over a period of, say, five years, the company explains. Under contract hire, however, the contract is based on length of hire and therefore any shortfall in finance and residual value is down to the company. There is also the added benefit that service maintenance, warranty issues and repairs are included in the hire cost.

Another major advantage of contract hire for small businesses is the lack of large capital outlay for equipment, which could damage the company’s balance sheet. While the business needs certain equipment, through a contract hire agreement, only the rental charges will be shown on the balance sheet, which should make it more attractive. This means you can budget

predictably for equipment costs, which are fixed for the length of the contract. It also means no large deposits or upfront VAT payments. When the contract hire agreement ends, there are two options – return the equipment and hire a new one, or get an extension on the agreement, which in some cases can be slightly cheaper, Contract Plant Rental says. Hall 19, Stand 19.224 69057

QUALITY PARTS OUTSTANDING SERVICE COMPETITIVE PRICES

AGRICULTURAL & ENGINEERING SPECIALISTS PARTS • TOOLS • ACCESSORIES

For all your agricultural requirements tel: 01728 621680 • email: sales@mdt-agri.co.uk 132 www.farmersguide.co.uk January 2020

Lamma 2020 pages 122-132.indd 132

08/12/2019 14:09

Push-Off-Trailers and Sweepers!

»ASW 271 Gigant« • Permissible total weight 20.000 kg • Low drawbar with 50mm ring hitch • Hydraulically suspended drawbar • Swap body • 2-circuit compressed air with ALB • Axles BPW 410x180 • 40 km/h version COC

• 2 brake axles, last steered • Tires 560/60 R 22.5 • Parabolic suspension TITAN • FULL LED lighting 12V • Side wall fillers and synthetic mudgards

pprox. lume a

35 m³

»PowerPro«

»TYPE 600«

• Working width 2.400 mm • for wheel and telescopic loaders • robust plastic bristles 500 mm • Two adjustment spindles • internal oil motor

• 2.3m working width • 3 point linkage / forklift mounting options • 600mm sweeper diameter • Collecting pan and side brush options

Visit us at the Lamma 2020 exhibition Hall 17 Stand 17.326

Office: +44 (0) 1765 647 579 | mobile: +44 (0) 7711 417172 | nick.dale@fliegl.com Details of dimensions, weights and technical data are subject to change. Illustrations partly with special equipment. Our General Terms and Conditions apply (see www.fliegl.com)

69143

FARMS ESTATES CONTRACTORS EQUINE

The first question we ask ourselves each day is ‘how could we have done that better?’. Better means safer: protecting people, property, liberty and wealth.” Mia Bambury, Health and Safety Consultant.

ARABLE LIVESTOCK

0800 0281965 info@revolutiongroupltd.com

bespoke health and safety advice for farms and estates

www.safetyrevolution.co.uk January 2020 www.farmersguide.co.uk 133

133-139 Lamma overspill.indd 133

06/12/2019 10:48

Trade-in scheme makes precision tech more affordable A new scheme by LH Agro will make upgrading to Topcon’s latest X35 console more affordable for existing users of its precision equipment. Customers can trade in their existing Topcon X30 console for the very latest X35 version, whilst transferring any activations unlocked in the old console. Users will also receive the new Topcon CL-10 modem, which adds cellular and Wi-Fi capability. The X35 is Topcon’s rangetopping control console and features a 12.1in touch-screen colour display. It uses the latest Horizon software to control a wide range of implements – including seed drills, fertiliser spreaders, sprayers and harvesters – and operations, including autosteering and implement guidance, variable rate applications, flow-meter analysis, implement height and section control, yield mapping and application recording. It is fully Isobus certified and easy to use, with icon-based and user-definable screen views, making it simple for operators to control the full spectrum of field operations.

book your 2020 Hire Requirements Today

Case & John Deere Tractors JCB & Case Telehandlers Telehandler Attachments Root/Grain/Silage Trailers - Flat Trailers Dump Trailers - Dust Suppression Tanks Diesel Bowsers Also Plant & Cabin Hire

HALL 19. STAND 606

The CL-10 modem allows access to the new Topcon Agriculture Platform (TAP) – a cloud-based, integrated agronomic management platform. It also provides connectivity for remote support, telematics and the Xtend feature for displaying console views on a smartphone or tablet device. Managing director Richard Reed commented: “Upgrading gives users the peace of mind that their implement control and GPS guidance systems are fully compatible with the latest operating platforms and future-proofed and ready to work with any forthcoming technological developments.” Hall 9, Stand 9.612

STRIMECH FOLDING FORK

Strimech introduce their new Pro-Ag Folding Fork. The updated design has been developed for extended working life via a number of smart revisions giving greater strength and durability. • Upgrade and strengthening to main pivot area • Hydraulic rams positioned to help reduce bounce when wings are open during use and reduce the possibility of damage when closed • Hydraulic hoses fully enclosed to reduce risk of damage and wear & tear • Angled plates on wings and main body to reduce build-up of material during usage • Genuine Hardox® tines and heat-treated Boron wear plates to improve durability • Customised branding and dealer logo options at extra cost • 3 width sizes available - 12ft, 14ft and 16ft 69210

Visit us at on Stand 20.584 in Hall 20 to ﬁnd out more and see the rest of our range

01922 649700

email sales@strimech.co.uk

www.strimech.co.uk

Hardox® is a registered trademark of SSAB Technology, Sweden

MINI RB1.8

HALL 20 - STAND 406

THE COMPACT MACHINE FOR THE LARGEST BALES AND THE ULTIMATE SOLUTION FOR STRAW SPREADING AND FEEDING

Spread-a-Bale

Tel: 01244 394258 Email: sales@spread-a-bale.com WWW.SPREAD-A-BALE.COM

134 www.farmersguide.co.uk January 2020

133-139 Lamma overspill.indd 134

08/12/2019 17:24

Preview

Bringing cleaner forage for 2020

See one of the marketâ&#x20AC;&#x2122;s most versatile drills at Lamma Visitors to Lamma â&#x20AC;&#x2122;20 will be able to see a Virkar Dynamic drill on the Samagri stand. The drill is available in 4.5, 5 and 6m working widths, with bigger sizes in development for the future. Its modular design means the machine can incorporate a variety of extras to suit individual needs. The seed hopper carries 5,300l and there is an option to split the tank 65 per cent seed and 35 per cent fertiliser, running through two metering systems. A third hopper can also be specified. Free Drive the steering axle offers new freedom sowing on a curved path, the company says, and the system frees up tension in the coulters arm so less stress

is put on components â&#x20AC;&#x201C; leading to longer working life. The drill is fully Isobus compatible and can run through any tractor terminal. It can also do variable rate drilling if required. Its low disturbance means the 6m drill can be pulled by 180hp. In addition to the standard coulters, a variety of coulters are available for very small seeds and beans. The drill comes standard with LED work lights and tank lights, a toolbox, calibration bag and scales. Samagri says the machine offers the most advanced no tillage system on the market and is also one of the most versatile. Hall 20, Stand 20.708

Slovenia-based machinery company SIP will be attending Lamma to present machines that provide cleaner quality forage production for 2020. The product range on display will include Silver Cut Disc mowers with advanced disc profile designs. Coupled with a heavy, wide, quick release knife, these are better able to cope with tough conditions while delivering a clean cut, the company says. The stand will also feature a 10m triple plain mower combination and mounted 3.27m mower conditioner, as well as a Spider 900/8T 9.0m 8 rotor trailed model. Spider tedders feature smaller diameter rotors which are better able to pick up all the crop and spread it in a neat, lump-free manner. Developed over many years, the Spider range caters for all types of farm and

large-scale contractors. Higher dry matter content of forage crops is now paramount for farmers, so effective, even drying is of vital importance. SIP says its robust designs offer strong frames, tubular tine arms and superstrong spring steel tines. A more recent range from SIP is the Air Swath belt rakes, which it says represent the next stage in crop raking. In place of vertical tines on conventional rakes, a flexible, small diameter pick-up feeds material via a rotary feeder onto a conveyor belt, where it is moved sideways before being delivered into a row. A combination of front-mounted and rear-trailed centre pull models offers ultimate flexibility of swath formation patterns. The 300 F and 500 T models will be at Lamma. Hall 19, Stand 19.300

LAMMA Stand 20.708 Dynamic

www.samagri.co.uk

The High Precision Direct Drill High quality, low disturbance no tillage system Easy maintenance and low running cost Turbo cutting disc creates a clean micro tilth for seed to be placed in Rubber or steel closing wheels firm the soil around the seed Tilled soil under the seed gives easy root establishment 25cm and 19cm row spacing Modular design 4.5m, 5m, & 6m Samagri Ltd - Manor Court Store, Scratchface Lane, Herriard, Basingstoke, RG25 2TX - 01256 384208 - samagri@btconnect.com

January 2020 www.farmersguide.co.uk 135

133-139 Lamma overspill.indd 135

08/12/2019 17:26

New scraper launched by popular demand

Agricast’s new high-strength scraper is suitable for use on Simba SL and DTX machines.

A new high-strength scraper for Simba machines will be launched on the Agricast stand at Lamma ’20. Suitable for use on Simba SL and DTX machines, the company’s new scraper was developed in response to a large number of enquiries from farmers whose scrapers had buckled or twisted in use. As well as being stronger, the new scraper cleans between rings and working shoulders. It is made from reinforced 15mm thick steel and designed to perfectly fit existing scraper rails with the use of dual U Bolts, which are supplied with the scraper arm. A 6mm thick Hardox scraper blade has also been developed for use with the new arm. The scraper is intended to work in tandem with the Agricast PRR610-LW wheel, which launched in late 2019. A third new product, a range of Pro-Lift Points, completes Agricast’s Lamma launch suite. The Heavy-Duty Pro-Lift Point, which is designed to fit Simba Pro-Lift legs, is substantially broader on the front end and over a kilo heavier than the company’s range of standard points.

The new scraper is designed to perfectly fit existing scraper rails with the use of dual U Bolts.

General manager William Robinson says: “We’ve taken our standard point, which is an extremely popular part, and added extensive Tungsten Carbide and hard facing to it. We’ve also made the point slightly wider and heavier. The result is a replacement part that has proved incredibly resilient in tests.” Hall 20, Stand 20.416

136 www.farmersguide.co.uk January 2020

133-139 Lamma overspill.indd 136

08/12/2019 17:28

Preview

Novel video system makes UK debut

Next generation Pro Ag folding fork launched Strimech Engineering is introducing a more sustainable version of its classic folding fork in time for Lamma ’20. The heavy-duty attachment retains the powerful and hardwearing quality that has made it a best seller, but it has been enhanced with added protective features to reduce the impact of day-to-day operation on the working life of the fork. The re-siting of hydraulic rams and a fresh pivot design safeguards against material build-up and minimises wing damage from vehicle vibration in transit. Hydraulic hoses are now enclosed by protective steel guards to reduce risk of damage and the angle of plates on the wings and body prevent the accumulation of

dirt and associated reductions in performance over time. The launch represents the first in a series of next generation product re-development under the direction of managing director, Justin Blades, who said: “I’m delighted to be bringing this new folding fork to our customers. The company has a long heritage built on the strength and durability of our products and we continue to innovate in order to offer longevity with efficiency at the most affordable price point.” The Pro Ag fork still comes with Hardox tines and heat-treated Boron wear plates on contact surfaces. It is available in three width sizes and there are also custom branding options for OEMs and dealerships. Hall 20, Stand 20.584

Grimme’s new video system for agricultural machinery, SmartView, is set to make its UK debut at Lamma 2020. The system was awarded a DLG Silver Medal for Innovation at Agritechnica 2019. Pending a patent, it is the first video system for agricultural machinery that allows harvester operators to decide what part of the cleaning and sorting operations they want to see and how they want to view them. SmartView features include a zoom and slow-motion function; live image transfer to other mobile devices via Wi-Fi; a choice of various screen-window arrangements; and the largest display on the market. Grimme said the product represents a huge step forward in automated set-up and control for harvesters. As the spring season approaches, the company’s focus for Lamma will be on planting and crop establishment technologies, not just for potatoes but across a whole range of other

root crops. Grimme offers planting solutions for crops ranging from sugar beet with the Matrix seeder, to vegetables based on its Grimme by Stanhay platform. Visitors to the company’s stand will be able to try the latest advances in the myGrimme system. This includes registering your own Grimme machines online, with the ability to call down data such as detailed specifications, parts lists and operator instructions. Another exciting feature of myGrimme is the opportunity to generate location data. Hall 8–9, Stand 8–9.222

including tipper trailers from 1.5t upwards, push-off trailers and their attachments, chaser bins, bale trailers, livestock trailers, hook lift trailers and plant trailers. Tanker solutions include steel vacuum tankers from 3,000–30,000-litre capacity, pump tankers from 5,000–27,500 litres, and polyline tankers from 6,000–18,500 litres, plus transport tankers, field tankers and nurse tanks. Groundbased distribution systems are also available, from umbilical units to tanker-mounted dribble bars, trailing

shoes, grassland disc, arable disc and tine injectors, all using Fliegl’s patented distribution system. Offering the perfect solution for agriculture, the Fliegl Agrocenter produces a wide range of agricultural attachments for tractor loaders, handlers and three-point linkage mounting, for example sweepers, clearing equipment, bale attachments, feeding and silage technology, drilling, landscape management and forestry, and many more. Hall 17, Stand 17.326

Innovation by tradition Fliegl is a family business with a passion. Tradition, innovation and family values have guided the company for decades and it is proud of these principles. The

family concept is at the core of Fliegl’s business, standing as it does for friendship, trust, passion and solidarity. All these qualities combine to form the foundation of the company’s daily work. Every day, it strives to develop new innovations for the world of agriculture, yet never losing sight of traditional, tried-andtested techniques. However, the company mission is also to grow with unwavering commitment and dedication, all the while placing its faith and confidence in the future. Fliegl offers transport solutions

LAMMA 2020 7-8 January 2020 Hall 19 | Stand 300

* More at www.sip.si

PATENTED

Y - DRIVE

www.sip.si

Maximize your productivity

2019-11-SIP maximize_Farmers_guide_190_65_Lamma 2020-en.indd 1

133-139 Lamma overspill.indd 137

Contact: martin.holden@sip.si @SIPSlovenia

11/29/2019 3:05:16 PM

January 2020 www.farmersguide.co.uk 137

08/12/2019 17:29

Preview

Heavy-duty tine drill proves itself during wet autumn

Samagri Ltd’s stand at Lamma will feature a Kockerling Jockey, a simple heavy-duty tine drill with four rows of Hercules tines, 16.6cm row spacing and 60cm under frame clearance for working in large amounts of crop residues. It is ideal for working in min-till and plough-based systems, as well as direct seeding on lighter soils, the company says. The drill is available in 6, 9 and 10m and comes with front cross board as standard. Wheel track eradicators are optional. Samagri says the drill has really proved itself this past autumn, when we have seen some really challenging conditions.

Also on display at the show will be a Kockerling Vitu, which is ideal for seeding in ploughed fields or min-till. It is equipped with a two-row compact disc harrow and strong levelling board in front or behind the tyre packer. The two-row wheel packer ensures the machine can keep working, even in marginal conditions. Meanwhile, the double disc coulters allow the Vitu to place seed very precisely, even at high working speeds. It is available in 3, 4, 6m and 6m grain and fertiliser. Depth control can be either mechanical or hydraulic. Hall 20, Stand 20.708

UK’s first farm weather network reaches next stage Smart weather station pioneer Sencrop will launch its weather networking feature at Lamma, allowing the ultra-local, in-field units to link to one another and share live and historical weather data, improving the relevance of weather forecasts for individual users. The digital farming start-up, which offers farmers a range of in-field weather sensors and claims more than 10,000 users across 16 countries, says the networking feature allows many more farmers to benefit from the increasing capabilities of Sencrop’s progressive toolset. Business manager Fred South says: “These networks will be able to link between 300 and 600 stations and the number of members within each network is unlimited. “Data from the network, such as temperature, wind speed and direction, humidity, rainfall and leaf wetness, can be viewed and compared through the Sencrop app. Users will be able to join a network even if they don’t have their own Sencrop unit, paying a subscription to access the app.”

The networking feature has already attracted interest from prospective customers, and a major co-op is the first UK-based Sencrop private network. Fred says: "They view it as an added-value service for their customers, allowing agronomists to offer better advice, based on more accurate, relevant and timely data.” Sencrop believes crowd-sourcing weather and other farm data can, through analytics, deliver value, efficiency and environmental gains throughout the supply chain. Hall 10, Stand 10.812

LAMMA Stand 20.708 Jockey

www.samagri.co.uk

The Jockey tine seeder drill 4 rows of tines at 16,6 cm row spacing and 60 cm underbeam-clearance for perfect trash flow in min-till conditions. 2800 ltr seed hopper with radar-speedcontrolled metering for precise seed rates. Only 140 hp needed to haul the 6 m working width using 5 ltr/ha fuel. Front cross-board for best levelling on ploughed fields. Unique Double-STS-roller gives targeted reconsolidation of the soil just where the seed sits. Samagri Ltd - Manor Court Store, Scratchface Lane, Herriard, Basingstoke, RG25 2TX - 01256 384208 - samagri@btconnect.com

138 www.farmersguide.co.uk January 2020

133-139 Lamma overspill.indd 138

08/12/2019 17:33

Visit us at

Stand 18.530

Fertility in your Land

BaĹ&#x;ak are introducing their exciting range of tractors and telehandlers into the UK & Ireland. We invite enquiries! For dealership opportunities for further information please contact. 0044 (0)121 740 0194

69211

January 2020 www.farmersguide.co.uk 139

133-139 Lamma overspill.indd 139

09/12/2019 10:38

The best things in life are free.

www.

Farmers Guide

.co.uk

BUY & SELL for FREE as a Private Farmer

11/12/2019 21:44

140 house ad.indd 140

Machinery

New drill impresses test users ahead of limited production next year A new tine drill, designed to cope with some of the heaviest clay soils, has continued working in wet conditions in Essex when most other drills had returned to their sheds. David Williams saw it at work. Essex-based J Brock & Sons has a reputation for manufacturing durable, practical machinery, and when a prototype version of the company’s new Campaign Drill had its first public demonstration in autumn 2016, there was plenty of interest. Development continues to refine the design, but a limited number will be available to purchase next year.

Practical design A move to late autumn drilling of winter crops in recent years has led to increased demand for drills capable of operating in wetter weather and the Brock Campaign Drill, in working widths up to 13.5m, will suit the needs of large, professional farms and has a specification to match. The Campaign Drill line-up includes working widths from 6–13.5m, all trailed. Heavy-duty low disturbance spring coulters ensure excellent penetration into wet or dry soils and allow operation on pre-cultivated land as well as the capability to direct-drill, if conditions are favourable. The coulters have an effective row spacing of 150mm but, mounted across four rows, there is plenty of space for trash to pass through and limited opportunity for blocking to occur. The coulter bar assembly is behind the large hopper, and its weight is carried on three flotation tyres, which also provide depth control and are used to lift the coulters clear of the ground during headland turns. Two larger wheels within the frame are for transport and also carry the hopper in the field, which means drilling depth is unaffected by the hopper contents. All five wheels are centrally mounted along the same axis between the hopper and coulter bar to avoid scrubbing during turns and, because they run ahead of the tillage

component on undisturbed ground, there is less tendency for soil to be picked up. Two tine coulters behind each wheel loosen the soil to relieve compaction and maintain even drilling depth. A double row of light sprung harrow tines at the rear levels the surface and covers the seed and a row of distributor plates for precise slug pellet application is an option.

“

Four weeks of daily showers prevented land from drying enough to work.

Access to the hopper for filling and maintenance is convenient, and hydraulicopening hopper lids double as hopper extensions when they are open. The range of specifications includes ability to sow grain, fertiliser, slug pellets and Avadex (tri-allate) in one pass. Accord metering is used, controlled through Topcon Apollo software, which was specially developed for air seeders, but the drill is also Isobus-compatible for direct operation from the

tractor, and incorporates full- and half-width auto shut-off. Additional standard and optional features include convenient hydraulic auger hopper emptying, and integral blow-down hose.

Tricky autumn With no press wheels, discs or packers, the Campaign Drill has proved its ability to operate in wet, sticky soils previously, but this year heavy land farmers across East Anglia have had to contend with especially challenging conditions. Dry weather after harvest resulted in land which was hard to work and break down, with large clods featuring in many seedbeds. When moisture arrived, conditions improved for a period when a lot of drilling was achieved, but from mid-October the weather turned wetter and, while total rainfall wasn’t excessive – four weeks of daily showers prevented land from drying enough to work. One Essex farmer who found himself in this situation was John Harrison of Garlands Farm Ltd, Steeple Bumpstead. “We have some lighter land, but most is heavy Hanslope and north Essex clay and it’s been a frustrating autumn,” he explained. “We run two drills, including an 8m drill with discs that we use for most cereals and a smaller 6m which is older and drills beans. More than three weeks after wet weather arrived, it had remained too wet for anything with wheels to work.” continued over…

Brock’s Campaign Drill uses heavy-duty springloaded tine coulters and a rear spring tine rake to avoid blockages.

January 2020 www.farmersguide.co.uk 141

140-142 Brock drills (024).indd 141

08/12/2019 17:43

Machinery Control is through a Topcon Apollo display, and the drill is also Isobus-compatible. At Garlands Farm, GPS positioning and guidance were provided through the farm’s own Trimble-based system and information from the Trimble display was then shared with the Topcon for automatic control.

Impressed user

…from previous page

John has been a customer of J Brock & Sons for many years and owns a set of the company’s 20m rolls to match the farm’s 40m tramlines, as well as a Farmet Fantom 12.5m cultivator imported and supplied by the dealer. “We knew that Philip Brock was keen to test his new drill and we needed to get our crops established. We made contact and arranged to use the latest version, and it handled the conditions very well. After more than three weeks during which we had been unable to make progress with our own drills we could get on and establish our wheat successfully. It was noticeable that while we were drilling there was no arable field work going on elsewhere in the area. The new drill has no discs, rollers or packers which meant there was nowhere for the soil to build up and block. In fact, the drill tines and rake remained remarkably clear and clean, and the design also means there is little danger of the coulters blocking – even in this autumn’s working conditions. The drill is still a ‘work in progress’ but it was interesting, and the design looks successful.”

Recent design changes for this autumn have included a revised headland lifting technique. Previously the three depth wheels lifted the drilling elements clear of the ground during turns, but now the two large transport wheels help share the load, reducing ruts and compaction.

“

I was impressed by the self-cleaning action of the coulters and rake.

Recent updates J Brock & Sons director and drill designer Philip Brock was watching the drill at work when Farmers Guide visited the farm, and was pleased with its progress, but not surprised by its performance. “The land we farm at Thaxted, Essex is very similar and much of our testing has taken place there as well as on other local farms. Developing a drill which remains free of blockages, even when working in sticky, heavy clay was the objective. We knew a drill capable of high work rates was needed, and every aspect of its design from the tine coulters to the metering system and the wide working widths are to optimise working efficiency for professional farms.” Philip explained that with the drill remaining in development, modifications to the design during the past year have included the headland lifting system. Previously only the three coulter bar wheels lifted the drill frame during headland turns, but on soft, loose soils this could create ruts. Now the two main transport wheels share the weight, leaving the headland level. The metering system has also been modified with new venturis through which grain and fertiliser enter at the same point. Previously there were four venturis – two each for grain and fertiliser, but reducing the number means material is introduced through a shorter route into a more powerful air flow, reducing the opportunity for blockages, even at high working speeds and high drilling rates. The tramlining system is also improved with double-acting actuators as the previous spring-return version sometimes crept shut, resulting in decreased flow.

At Garlands Farm, the drill’s main user was Nick Herniman. “Once set up the drill tends to require little attention and I was impressed by the self-cleaning action of the coulters and rake. The wheels run on drier undisturbed top soil ahead of the coulters so there is no need to worry about blockages and, even in the wet conditions, the 9m Campaign Drill was easier to pull than our usual 8m machine. Typical working speed was approximately 13–14kph, and I could have travelled faster, but the high work-rate allowed us to easily complete more than 40ha in a day.” The drill was set up and operated through a Topcon terminal, which also managed slug pellet application through the rear-mounted distributor. Automatic boundary and headland control setup was available through the display but while the drill was on loan a guidance signal from an RTX network was accessed through Nick’s usual Trimble terminal, with GPS data then supplied to the linked Topcon drill control system. Nick commented that cameras installed on the drill were an asset. “Having them in the hoppers and metering units makes it easy to see at a glance that everything is working as it should,” he explained. “The flow of seed is easily seen and if a blockage occurred then it would be noticed immediately. “There is no way either of our drills would have worked in the conditions we experienced in late October, as the following wheels and packer would have become blocked as soon as the soil was disturbed. I don’t know of any other drill which would have worked at all, but the Brock drill did a good job, covering the seed well, leaving very little on the surface and creating good conditions for establishment.” FG

The Campaign Drill’s main user Nick Herniman said he didn’t know of any other drill which would have operated without blocking in the sticky conditions. High drilling speeds and a 9m working width made it easy to achieve more than 40ha per day.

142 www.farmersguide.co.uk January 2020

140-142 Brock drills (024).indd 142

08/12/2019 17:43

Blackburn Potato Chitting Crate

RollerShutterDOORS

The Blackburn Crate advantages include saving time and labour by using a forklift with a tipper attachment to fill the hopper with minimum damage, increasing acreage

Crates can be stacked up to 5m high, with unobstructed passage for light penetration and air movement

•Electric or manual •24 hour repair service •Provides excellent security

The design of the curved welded mesh interior, ensures that no surface of the potato is any more than 3” from the light, making inspection and control easier

•Also supply steel-hinged doors

FREE SURVEY ANYWHERE IN THE UK

DOORS & SHUTTERS LTD

68001

Tel: 01142 889464•Fax: 01142 939193 Email: sales@dpdoorsandshutters.co.uk Web: www.dpdoorsandshutters.co.uk

110 volt and 240 volt models available

RADIANT HEATER • from 51,000 to 140,000Btu/20kW–40kW • low noise • no air movement, dust free • inside/outside use • diesel/paraffin • 240 volt/110 volt models available • pre-heaters fitted as standard • new, used and second hand units available • servicing from £85* • hire available in some areas *subject to terms & conditions of Wilms UK Ltd

Wilms (UK) Ltd, Unit 14 MJS Yard, Ashbocking Road, Henley, Ipswich IP6 0SA

OFFERS AVAILABLE – PHONE FOR A GREAT DEAL

THE ORIGINAL

Incorporating DSMA & ABHM

68302

Pellcroft Engineering Limited sales@pellcroft.com 01526 342466 www.pellcroft.com

OFFERS AVAILABLE – PHONE FOR A GREAT DEAL

•High Quality construction or powder coated •Galvanised to standard colour

67981

January 2020 www.farmersguide.co.uk 143

143-145 News.indd 143

06/12/2019 12:29

The

British Rubber Co.

Established 90 years

Sole UK Distributor for Goodyear Vintage Tyres

Agricultural, Plant and Industrial Tyres Next Day Nationwide Delivery Guaranteed

Reducing the risk of flooding, land drainage and irrigation issues, together with livestock water supply concerns

As specialists we have an extensive range in stock

Water supply cut off! – Is there a contingency plan such as storage and a pumping system? These are common everyday issues for the farming community

Stuart Pumps are here to help you Mitas AC65

Vredestein Flotation

With the majority pumps and ancillary plant readily available from stock we are in an ideal position to fulfil your needs either planned or during an emergency

Trelleborg TH400 Cultor RD-01

Call now for competitive prices – we endeavour not to be beaten

Benefits

• Large range of both new and used pumps including self-priming, borehole, fully submersible • Option of power source such as diesel/petrol/electric • Over 35 years experience serving the farming community and the water industry • Very competitive prices • Most pumps and ancillary plant available ex stock • Options for sale or rental • Maintenance service agreements available • Technical and spares support available

email: sales@britishrubberco.co.uk

68988

01274 585427

68347

www.britishrubberco.co.uk he y 40s in t dustr ar in ye tter u sh

STEEL

on-line: www.stuartgroup.ltd.uk/pumps email: pumpsales@stuartgroup.info • For further info call 01953 458988

PLASTIC PRODUCTS

Large Agricultural & Equestrian Range

ORDER YOUR FREE CATALOGUE TODAY

ROLLER

SHUTTER

DOORS We offer a made-to-measure solution to secure workshops and grain stores • Steel roller shutters can be operated by hand chain or electric using 3 phase or single phase motors • Standard finish is galvanised with colour options of Plastisol or Powder Coating • Access doors built into the shutter or positioned in the existing walls are also available • Shutters can be made up to 8m wide with wind anchors standard over 4.5m • With 40 years experience in the roller shutter industry call us anytime for a competitive price.

Pallet Containers

IBC Bund

Feed Bins

Spill Shak

Storage Containers

Dog Baths

Chemical Store

Tack Boxes

Horse Jumps

Boot Cleaners

Feed Buckets

• STORAGE CONTAINERS • SPILL CONTAINMENT • TOOL BOXES • STORAGE CABINETS • EQUINE PRODUCTS • PET PRODUCTS • TACK STORAGE • ANIMAL FEED STORAGE • WATER TROUGHS

ORDER ONLINE t: 01353 725 151 e: david@russellmillarltd.co.uk

www.sandersonplastics.com Or call our Sales team on: 0844 335 0347

144 www.farmersguide.co.uk January 2020

143-145 News.indd 144

06/12/2019 12:35

News

Moling – an important part of the drainage plan Soil is an integral part of any farming business – whether it be grassland or arable, it is a valuable asset to the farm and, as highlighted by the severe weather of late, needs proper drainage. Drainage is one of the significant requirements for keeping the soil in good order and mole draining is an important part of the plan. Ditching and outfalls need to be checked as drainage schemes will not work satisfactorily unless ditches are moving the water away. Farmers should consider installing headland drains as moles will collapse if water cannot get away and the moles become waterlogged.

Irrigation – do you need to change?

A lot of clay land will need moling next year due to the severe stress that the weather has put the soil through. Ideally it is most beneficial to mole grassland in the spring when the ground is drying out and arable land too, if possible. The Maidwell Moler range offers robustly-built machines with beam construction and high ground clearance to prevent blockage. The single-, twin- and triple-leg molers are built to withstand high horsepower tractors and crawlers. They have a unique screw-adjusting doubleended leg, incorporating a shear bolt device acting as a safety mechanism. The pivoting arm headstock or hydraulically operating drawbar gives easy penetration and withdrawal from the soil allowing very low surface disturbance and little sign of where the leg has been. Addiitonal press wheels will make surface disruption even less and can be an added feature on the machines. The Maidwell Moler range offers robustlybuilt machines, that can withstand high horsepower tractors and crawlers.

MAIDWELL MOLERS

Wroot Water director, Anthony Hopkins (right), explores the cost and profit variations associated with irrigation. “When I meet people from around the world and tell them I work in the irrigation business, they laugh. Their next words invariably are, ‘it’s always raining in UK’. Those of us who live here are well aware that this is not always the case – we do get very dry periods. Reflecting on the 2018 and 2019 growing seasons, we have had the most extremes of weather in the UK for many years. The reality is that in most years – particularly when growing potatoes and field veg crops – we have to irrigate. Usually in irrigation areas, we have to apply at a rate of between 100mm–200mm/ha. It is very important with any irrigation system to deliver the right amount of water to the crop, at the right time. The aim is to match the application rate to the soil infiltration rate and, of course,

the crop requirement. This means giving the crop water when it is growing and not when the crop is asleep. Therefore, when we compare the cost of applying water per ha with different systems some of the overall cost is not always realised. At Wroot Water we have been looking at the complex issue of the costs associated with irrigation – this includes energy costs to pump the water, time to manage and set up the different irrigation systems and depreciation of irrigating equipment. One aspect that is very difficult to measure is the variation in profit per ha associated with the use of different irrigation systems. For example, in the absence of relevant scientific data, if the difference between irrigation methods equated to 20 to 30 per cent then this is something we really need to be focusing on in the future, especially as margins get ever tighter. FG

Benefit from improved soil structure, better drainage and higher yields

Hankins Engineering

Specialists in contract moling & hire

68676

gned Desi ilt by & bu

68618

STRONGEST & BEST MOLERS from £4,500

✔ Profit from our 30 plus years of experience and join 100's of satisfied users over 1000's of acres ✔ Robustly built with a unique pitch adjuster, incorporating a shearbolt for leg protection ✔ Well proven design built to withstand large tractors and crawlers ✔ Copes extremely well in trashy conditions due to large swivelling disc ✔ Single, twin and three leg machines available, mounted and trailed ✔ Spares for most molers and subsoilers at competitive prices Contact Ron Hankins ✔ Discounts for winter orders telephone 01604 686216

for further information

mobile 07973 265378

www.maidwellmoler.co.uk

SUPPLY, DESIGN & INSTALLATION OF SPECIALIST IRRIGATION SYSTEMS

• DRIP • • SPRINKLERS • • HARD HOSE • • PUMPING • • SOLUTIONS FILTRATION • • UV TREATMENT • W are n e • K-LINE • ot at • BIO-FILTERS • but w not d e’re • BIO-BEDS • ead!

‘Our aim is your gain’ ain’ ai

www.wrootwater.com t: 01302 771881 e: info@wrootwater.com

January 2020 www.farmersguide.co.uk 145

143-145 News.indd 145

08/12/2019 17:46

Parker Hydraulics & Pneumatics Limited Mobile Hose Crimpers MC 1001 air operated

No-skive spiral hose up to 1”

Wire-braid hose up to 1”

MC 1001 manual

INDUSTRIAL DOOR Specialists • Galvanised Roller Shutters • Plastisol Colour Coated Roller Shutters • Insulated Roller Shutters • Sectional Overhead Doors • Steel 10 Point Locking Security/Personnel Doors

In the field, every minute counts. In today’s environment, equipment, whether it be agricultural, construction or mining, simply cannot afford unnecessary downtime. That’s why Gates has developed a range of small, portable and easy to use crimpers specifially designed for end-users on site. Since these simple, lightweight machines are designed as a part of the Gates Integrated System, end-users are assured of factory quality no-skive assemblies – even in the field.

Ashbourne Estate, Mile Cross Lane, Norwich, Norfolk NR6 6RY Tel: 01603 403190 Fax: 01603 485337 Email: sales@parkerhydraulics.co.uk

• Steel Fire Exit Doors • Fast Acting High Speed Doors • Dock Leveller/Loading Bay Installations • PVC Strip Curtains • and many more products

67960

MCX20

Tel: 01455 891929 • Fax: 01455 891974 Sapcote Road Industrial Estate • Burbage • Hinckley • Leicestershire • LE10 2AU

www.multiindustrialdoors.co.uk multidoors@hotmail.co.uk

Nationwide Service Tom Canham Plant & Hose Ltd Repairs & Servicing for Agricultural & Construction Machinery  Full On-Site Services for Repairs & Welding  Full Workshop Facilities & Mobile Service Vans  Welding & Fabrication

Call Tom Canham 07767 447472

 Generator Hire  Engine Rebuilds  Machine Refurbs  Mobile Hydraulic Hose Replacement  Vehicle Diagnostics & Repairs

01473 327596

 Air Conditioning  Lubricants and Much More...

or email: enquiries@collins-skiphire.co.uk

t: 01206 250443 m: 07767 447472 e: tcplant@btinternet.com 68911

Nortrack • Tenpenny Hill • Thorrington • CO7 8JG

67902

WANTED...

68342

ANGLIAN WILLOW SERVICE LTD ■ We are looking to Purchase Cricket Bat Willow Trees ■ Minimum of 5 trees – Excellent prices paid! ■ Extraction & clearance is all included ■ Free re-planting of replacement young trees Call Geoff Watling on:

01245 349811 or 07974 575431 Email: gwatling@anglianwillow.co.uk

5 GENERATIONS OF EXPERTISE 146 www.farmersguide.co.uk January 2020

146-148 News (085).indd 146

11/12/2019 16:45

News

Seventh heaven for YAMS at Murton Seven years ago, when auctioneer Richard Tasker was approached by a local farm machinery dealership to host the relaunch of a tractor brand, it gave him an idea for a larger event bringing together other farm machinery dealers in the county. Since then, it has grown into a show that last year attracted around 12,000 visitors – its highest attendance to date. YAMS – the Yorkshire Agricultural Machinery Show – will take place once again at York Auction Centre in Murton, near York, on Wednesday 5th February. It has seen seven years of constant growth and Richard says he still cannot quite believe how it continues to exceed expectations.

“We were fortunate and hit the mark from that first show in 2014,” he explains. “Yorkshire is a massive county with a rich diversity of farming and that means the whole range of agricultural machinery is in use – from tractors to grass harvest, combine harvesters to livestock equipment, cultivation machinery to slurry tankers and everything in between. “The early part of the year is an established purchase period for new farm machinery. It’s a time when farmers can evaluate what will work best and what better way than to have everything in one place so that a decision can be made. One of the hallmarks of YAMS has been the amount of business our trade stand

holders undertake in just one day. “Our local farm machinery dealerships are the cornerstone of YAMS. They have all, without question, made this a ‘mustattend’ event.” The show hit a new record of 230 trade stands at the last event and by late November 2019, Richard says he is already on course to top that figure for year seven. “As well as being a show where

business is done, YAMS has also become one of the biggest social events of the farming calendar in Yorkshire during the early part of the year,” he adds. “We make every effort to ensure it is easy to get in on the day, with a free shuttle bus service running every 15 minutes from the Grimston Bar Park & Ride where everyone can park for free. The bus takes just five minutes to get visitors on the showground.” FG

YAMS at a glance When: Where: Entry & parking: Further info:

Wednesday 5th February 2020 (8.30am–4:30pm) York Auction Centre, Murton, York YO19 5GF Free www.yams.uk.com

Wednesday 5th February 2020 At the York Auction Centre OPEN FROM 8.00AM TO 4.30PM • OVER 200 TRADE STANDS

MAIN SPONSOR

MEDIA PARTNER

OTHER SPONSORS

EASY ACCESS, GREAT ATMOSPHERE, GOOD FOOD, FRIENDLY AND FAMILIAR FACES FROM THE LOCAL DEALERSHIPS

ALL THE LATEST MACHINERY AND EQUIPMENT FOR AGRICULTURE, HORTICULTURE, GROUNDCARE, FORESTRY, PRECISION FARMING AND ESTATE MANAGEMENT

69055

January 2020 www.farmersguide.co.uk 147

146-148 News (085).indd 147

08/12/2019 17:48

COVENBROOK

Sales Direct

Approved

WE OFFER A WIDE RANGE OF QUALITY BUILT PRODUCTS DELIVERED NATIONWIDE DIRECT TO OUR CUSTOMERS We also undertake all agricultural engineering, fabricating, machining and welding, including reconditioning and modifications to existing machinery, blasting and paintshop facilities. For further information please ring John on 07860 417643

HD Access Platforms from stock

Rigid Bag Lifters from stock

Heavy Duty Flat 8

HD Muck Grabs

HD Bale Spikes – available in all sizes

HD Multi Bale Stackers

e: covenbrookfabrications@gmail.com • www.covenbrookfabrications.co.uk Mole Drainers (low horse power requirement)

Grain Pushers – available in all lengths

John on 07860 417643

68863

Covenbrook Hall Farm, Stisted, Braintree, Essex CM77 8AJ

148 www.farmersguide.co.uk January 2020

146-147 News (085).indd 148

06/12/2019 16:40

Machinery

{farm sale} Something for everyone at Essex farm machinery dispersal sale An Essex farm machinery dispersal sale in late September, organised by Cheffins on behalf of JA Brown & Sons, attracted a large number of bidders and resulted in some excellent prices for the lots on offer. David Williams reports. The sale was at Latton Priory Farm, near Harlow and resulted from a change in farming policy by the Brown family. Lots included modern and older tractors, implements and other machinery, much of it in very tidy condition and there were also additional lots included from other local farms. Cheffins auctioneer, Oliver Godfrey, said the auction was very successful: “The sale originated from a core of very well-maintained machinery and, coupled with our excellent client database for the area, resulted in an impressive line-up

with some quality included lots. The weather was fairly unsettled during the days before and, although it remained wet underfoot on the sale day, it was dry overhead! This greatly helped the attendance, and there was a full car park come 10.30am when the sale bell rang.” FG

This Massey Ferguson 135 with an expired 1965 C-plate was in very good original condition, and the tyres had plenty of tread. It carried original Eastern Tractors dealer stickers and had recorded 3,915 hours. As always when a good, original 135 comes up for sale there was a lot of interest, with a winning bid of £4,500.

Early autumn isn’t the best time for selling an Acrobat hay turner, and this aged model made £20.

Having worked only 1,495 hours, this 2015 Massey Ferguson 7618 Dyna-6 tractor was on good Michelin 20.8R38 rear, and 420/85R28 front tyres and carried its Mark Weatherhead dealer sticker. It was fitted with front linkage and came with a front linkage-mounted 850kg weight block. It was equipped wuth auto-steer, controlled through a Case IH FM750 display. It still carried its manufacturer warranty until June 2020. It sold for £48,400.

Dowdeswell ploughs are always in demand at farm sales, and this 2004-manufactured DP7E 5-f reversible fitted with UCN bodies was ready to work. It was a good buy at £1,300.

A larger Kuhn 4m HR4003D power-harrow, which was new in 2002, was fitted with leading tines to eradicate tractor wheel marks and a rear packer roller. It made £3,400.

A 2015 Massey Ferguson 5612 tractor with a 956 front loader appeared in very good condition and had recorded 4,493 hours. It was on good BKT tyres and achieved a winning bid of £29,500.

January 2020 www.farmersguide.co.uk 149

149-151 Farm Sale (033).indd 149

09/12/2019 22:00

The late autumn wet weather has put drilling operations under pressure over much of the UK and this pair of 18.4-38 Stocks dual wheels, sold complete with clamps, are likely to have seen use soon after the sale. They made an impressive £300.

This tidy Massey Ferguson 50B backhoe digger loader carried a 1979 V-registration (expired) and was very tidy for its age having only recorded just over 4,000 working hours. It came with a front bucket and selection of three digging buckets and sold for £5,100.

This 12-year-old New Holland T7040 4wd sold well at £26,000. It was on Michelin OmniBib 620/70R42 rear, and 480/70R30 front tyres, all with plenty of tread. It still had its Ernest Doe supplying dealer sticker, carried a 57 registration, and had worked only 4,004 hours.

This single-leg Maidwell Moler three-point linkage-mounted mole plough appeared in good condition and sold for £1,500.

This Albutt 2.68m3 grain bucket with mounts for a Cat handler made £1,000.

With its original Ernest Doe Power dealer stickers, this set of Dal-Bo Compact 1030 10.3m horizontal-folding rolls was in excellent order. A winning bid of £9,300 secured the item.

A second Dowdeswell plough was available for bidding at the sale. This 6f reversible was a DP7E model and appeared tidy but needed new wearing metal. It made £2,400.

An elderly Ransomes 3f reversible plough with hydraulic turnover and a rear depth wheel achieved a winning bid of £180.

Power-harrow drill combinations have been in demand this autumn, after harvest to help break up hard, dry ground and later as conventional drills struggled in the wet conditions. This Amazone AD-P 303 Special had a hopper extension, wedge ring rollers, RoTeC Plus disc coulters, pre-emergence markers, a following harrow and an Analog Plus control pad. The winning bidder paid £8,100.

This McConnel Commando Shakaerator was a 3m model with seven legs and came complete with a rear DD-ring packer. It sold for £1,800.

This Lister Blackstone dump hay rake was between 50–80 years old and appeared relatively tidy for its age. Quite a collectable item, it sold for £70.

A 1993 Bateman 2001 2,000-litre self-propelled Hi-Lo sprayer with hydrostatic drive and fitted with 36m booms sold for £4,600. It had twin spray lines, was on 12.4R32 tyres and wheels and was registered on a K-plate. The hour-meter displayed 10,608 hours worked and the sprayer came with an NSTS certificate to 21st February 2019.

150 www.farmersguide.co.uk January 2020

149-151 Farm Sale (033).indd 150

09/12/2019 22:01

Machinery

Cat telehandlers sell well second-hand and this 2009-manufactured TH407 was one of the sale’s ‘included’ lots. It was on a 59-plate and still carried its original Mark Weatherhead dealer stickers, had recorded only 4,302 working hours and was very tidy. It had Michelin tyres with plenty of tread, came with pallet forks and achieved a winning bid of £18,600.

An elderly Browns bale sledge achieved a winning bid of £30.

This Vaderstad 600S Rapid System Disc drill was another ‘included’ lot. It was a 2007-manufactured machine and was one of the sale highlights, achieving a winning bid of £27,200.

Sold but not pictured:

A Bomford Dyna Drive 3m rotary cultivator was elderly but appeared ready to work with a good set of tines. It sold for £600.

JCB telehandlers are in strong demand and a 2009-model Loadall 531-70 4wd was registered on an 09-plate and had recorded 5,487 working hours. It came with pallet forks and was on Michelin 460/70R24 tyres. The winning bidder paid £20,500 for this piece of kit. A Kuhn 3m power-harrow complete with rear packer roller appeared tidy and ready to work. It sold for £2,300.

Simba Cultipress presses always attract interest from trade and end-users at sales, and this 2004-manufactured 3.3m version with rigid tines, levelling boards and DD rings achieved a winning bid of £6,200.

A £2,500 winning bid made this tidy Sanderson SB50H 2wd rough terrain forklift a good buy. It was registered on a 1980 V-plate and displayed only 3,700 worked hours.

Sold well out of season, this John Deere 590 variable-chamber round baler sold for £2,300.

A set of 4.2m Simba 2B discs with hydraulic angling front and rear, hydraulic drawbar adjustment and with a 4.6m double press sold for £4,100.

HGV ACCESS TRACKWAY & TURNING PADS. WHICH WOULD YOU RATHER?

HEAVY DUTY TRACKWAY FOR HIRE OR PURCHASE

W / all-weatheraccess.co.uk T / 01371 700 510

January 2020 www.farmersguide.co.uk 151

149-151 Farm Sale (033).indd 151

09/12/2019 22:02

Farmers Guide

Picture

How to enter There are 10 subtle differences between pictures A and B. Clearly circle all 10 differences on picture A, fill in your contact details, cut out and send to: Spot the Difference Competition Freepost FARMERS GUIDE, Parkside, London Road Ipswich, IP2 0SS To reach us no later than 10th January 2020.

Name: .............................................................................. Address: .......................................................................... ......................................................................................... ......................................................................................... ......................................................................................... Tel: ................................................................................... Email: .............................................................................. Picture

Age if under 18:............................................................... Prize preference: ............................................................. Please let us know what you most enjoy reading in the magazine, in order of preference: 1........................... 2 .......................... 3 ............................

Farmers Guide Awards 2020 NOMINATIONS â&#x20AC;&#x201C; SEE PAGE 156

Who is your farming hero? And why? .......................................................................................... .......................................................................................... .......................................................................................... .......................................................................................... ..........................................................................................

Christmas Competition 2019 v2.indd 2

11/12/2019 12:17

Grouped prizes may be split up

Christmas Competition 2019 FINAL.indd 3

11/12/2019 11:09

Farmers Guide

s a m t s i r h C

i u Q

Questions

How to enter

1. What colour does one company this issue claim to mean ‘vitality’? (4) 2. Which equipment designer and manufacturer is offering ‘horses for hire’? (5)

We have set 12 questions based on advertisements, features or editorial in this issue of Farmers Guide. The answers are in one of these areas but NOT in the classified ad section at the back. The number in brackets indicates the number of letters in the answer. For a chance to win one of these fabulous prizes, kindly donated by Farmers Guide advertisers, send your answers by post, fax (01473 691886) or email: competition@farmersguide. co.uk clearly stating your name, address, postcode, telephone number and email address and if you have a prize preference. Under 18s, please tell us your age. The postal address is:

3. New to the list, this OSR variety sounds as though it might have quite a bite (9)

FG Christmas Quiz, Freepost, FARMERS GUIDE, Parkside, London Road, Ipswich IP2 0SS

9. What app, recently launched by a machinery company, sounds rather like a

To reach us no later than 10th January 2020.

11. How much did this 1965 Massey Ferguson 135 go for? £_____

4. Which company, more recently well-known for their fast cars, launched a tractor range at Earls Court in 1994? (11) 5. What character, created by Sir J. M. Barrie, was this prize-winning cow named after? (10) 6. This fruit likes to push grain (6) 7.

Which potato handling specialist was established in 1975? (5, 8)

8. The ‘three kings’ have been launched by which company? (6) popular song by The Temptations? (6) 10. This drainage product might conjure up images of a quality burrowing rodent (8, 5) 12. What tasty snack is supplied by this Stiffkey farm? (6, 6)

Christmas Competition 2019 FINAL.indd 4

11/12/2019 11:13

Grouped prizes may be split up

Christmas Competition 2019 FINAL.indd 5

11/12/2019 11:14

Each year Farmers Guide gives an Award for Excellence to both a machinery and an arable-related company who we feel deserve recognition. This year we’d also like you, our readers, to nominate a person who is your ‘Farming Hero’.

This could be a farm manager who goes above and beyond for their land, livestock and staff ; a dealer who provides the most fantastic service; an agronomist who you couldn’t do without; or a nutritionist who literally saves your bacon. Just tell us who your Farming Hero is and why, and we may be in touch for more information.

Nominations to be received by 31st January. Please send them via our Christmas Competition entry form on page 152 or email to editor@farmersguide.co.uk. The winner will be selected by the Editor after the closing date.

Awards 2020 Farmers Guide

Nominate your farming hero on page 152

Christmas Competition 2019 v2.indd 1

11/12/2019 12:09

Diversification

Breathing new life into British farms

In a world of rising energy costs, falling food prices and political uncertainty, the realities of farming can be harsh. But true to the ‘Keep calm and carry on’ spirit, more than 64 per cent of English farms have risen to these challenges by diversifying into new business ventures. Sarah Kidby reports. As farmers battle a set of unique and complex challenges, the trend for branching out into new revenue streams, outside of traditional farming, is becoming increasingly important. Defra figures suggest the total income from farm diversification was £580 million in 2015-16, and it is estimated that such activity brings in an average of £10,400 extra revenue per UK farm, so it is a venture well worth considering. The recent Farm Business Innovation Show (7-8 November) in Birmingham presented an Aladdin’s cave of ideas for giving your land a new lease of life.

What are the options? The opportunities for diversification seem almost boundless – from the more established ideas, such as setting up a glamping site, renting out holiday cottages or opening up a wedding venue, to the more unusual, including truffle cultivation, wildlife seed production and Christmas trees. Meanwhile, the craft beer revolution has seen the number of microbreweries in the UK reach more than 2,000 – a 64 per cent rise compared to five years ago, according to figures from accountancy firm UHY Hacker Young. There are also options for diversification within agriculture,

such as fish farming or producing alternative livestock products such as cashmere, goat’s milk and venison. Many dairy farmers are generating extra income through ice cream and cheese production, as the rapidly falling price of milk puts a serious strain on the industry. Environmental issues rising up the agenda brings opportunities as well as challenges, and farmers are uniquely placed to deliver public goods and be rewarded for them. This includes providing areas for wildlife to thrive and generating renewable energy on farm. Forestry could be another area of growth, with the rising market demand for biomass heating systems, and there are government grant schemes for felling and replanting. Many farmers are delving into multiple business streams – for example, Lynn and Richard Bailey, of Bawden Lodge Farm in Leicestershire, spoke at the Innovation Show about their experiences transforming

their farm buildings into a business community. The pair developed a solar energy source, became part of the National Forest Tender Scheme, set up an award-winning wedding and events business and installed their own on-site gin distillery – all the while continuing to farm. As well as growing your business and bringing in more revenue, diversification offers a real opportunity to connect with the local community. A rising number of farms are now opening up to the public for classes in cheese-making or fish smoking, for example, and ‘care farms’, which provide support and resources for vulnerable people in society, are growing in popularity. continued over…

Forestry could be an area for growth, with rising market demand for biomass heating systems.

Community on the farm Suffolk farmer Alastair Sharp says he feels it would be difficult to have a viable farm tenancy without diversification. He took over tenancy of the family-run farm from his father in 1996 and began diversifying with the landlord’s co-operation when beef cattle sheds became redundant. The arable farm now has three main tenants – the Star Wing Brewery and Tap Room, Professional Poultry Solutions and the English Electric Motor Co. Multiple businesses are involved in the site, including a bakery, locally-made ice cream, an outdoor theatre, off-road demo course and hop-growing. Events such as the annual beer festival, hop-picking days and Christmas Fair can bring in more than 500 people at a time. Alastair says: “It has completely changed the nature of the farmyard, with members of the public visiting, but once that is accepted and embraced the diversifications continue to go from strength to strength. The farmyard now employs at least 20 people and,without diversification, it would be none – so it’s better for the local community, too. “As a farm business it is also good to have income unrelated to cropping and the weather,” he adds. “It has been a challenge at times but the end result has been worth it.” However, it is essential to have an understanding landlord who is prepared to work with you, he says.

January 2020 www.farmersguide.co.uk 157

160-163 Diversification.indd 157

10/12/2019 16:38

Diversification â&#x20AC;Śfrom previous page

The practicalities

Many dairy farmers are generating extra income through ice cream and cheese production.

F Domes provide self-assembled, en-suite pods for landowners who are looking to start a glamping business.

Thinking about fresh ideas for a new business can be exciting, but there are, of course, many practical issues to consider. As with any new business venture, it is important to be aware of the legalities and potential pitfalls, such as planning permission, property law, liability, health and safety and tax issues, for example. While diversification can be rewarding, both financially and personally, it is not guaranteed to boost income. Before embarking on a new business idea, AHDB says you must first ensure your existing enterprise is running smoothly, meeting the targets set out in your business plan and on target for profit and loss projections. Diversifying when there are issues in your main business could just magnify the problem, putting both businesses at risk. If you do decide to go ahead, create a business plan, research your competition and consider products, pricing and marketing. It is important to take your time, make sure the demand for your product is there and that you can make a profit. Expert advice and guidance are always a good idea when thinking about

the future of your business or any potential diversification. It is wise to play to your existing skills and strengths when setting up a new business. If you are entering into new territory, real estate agency Strutt & Parker says you will need to either retrain yourself so you have the necessary skills and knowledge, or hire someone with the right skills. Lack of infrastructure such as road access, broadband and mobile services can also be a problem with some businesses, so it is important to think about what you need and the costs involved. In addition to these considerations, you should bear in mind that different rules and regulations may apply to your new business, for example health and safety or employment issues. You will also need to speak to your local council to see if planning permission is required. Last but certainly not least is the question of securing funding, which according to estate agency Carter Jonas, is one of the biggest challenges for those considering diversification. Options recommended by Defra include the Rural Development Programme for England (RDPE), or commercial loans and overdrafts. FG

Growing interest in wind power for off-grid glamping Many farmers are looking to install wind turbines to power glamping sites, according to UK manufacturer FuturEnergy, which has launched the first remote-controlled micro wind turbine. Wind power is one of the fastestgrowing land-based renewable energy sources available to farmers, both for self-supply and to export to others, according to the NFU. Out of 8GW of onshore wind power that was installed in the UK by 2015, around 200-300MW is thought to be in the form of farmer-owned wind turbines, and this figure is expected to grow to as much as 1,000MW by 2025. With 75 per cent of UK land area belonging to the agricultural sector, the NFU says farmers are wellplaced to capture renewable energy flows, whilst maintaining their traditional role in food production. UK-based wind turbine manufacturer FuturEnergy Ltd says it is seeing many farmers who are looking to diversify into wind power, predominantly to generate heating and lighting for setting up glamping sites off-grid. Other applications

include electric fencing or remote heating and lighting for lambing sheds, but the company says there are many options for farmers, depending on what they require for their business. As well as helping with diversification projects off-grid, wind power could also reduce costs by generating electricity on-farm. FuturEnergy launched the first remote-controlled micro wind turbine, AirForce Control, which means farmers no longer have to manually switch off the turbine during high wind speeds. Good wind turbine sites are often in remote locations off-grid, presenting significant challenges to customers who are not always able to turn them off in high wind conditions, the company explains. AirForce Control, however, comes with a Davis Anemometer,

which monitors wind speeds and is pre-programmed to shut down when they reach a certain speed. In addition, when battery charging parameters are met, or other controlled parameters are exceeded, the turbine is automatically stopped and restarted when conditions return within operational limits, or when battery levels are running low. It can be monitored and controlled through a PC, tablet or smartphone, offering access to a web-based portal that shows how much power the turbine is producing and how much it has produced historically. FG

AirForce Control means farmers no longer have to manually switch off the turbine during high wind speeds.

158 www.farmersguide.co.uk January 2020

160-163 Diversification.indd 158

10/12/2019 16:58

160-163 Diversification.indd 159

10/12/2019 16:39

www.

Farmers Guide

We keep your FarmAds FREE.

You keep the country fed.

.co.uk

hvm@dezwaef.uk KOMPAKTOMAT Complete seedbed cultivator

>> Excellent levelling and consolidation capabilities >> Options to choose from multiple tines and roller combinations >> Manual or hydraulic levelling board and depth control options

For more Information CALL NOW...

01371 830353

www.hvmagri.co.uk 07715 624941

69209

VERSO

Springtime seedbed cultivator

>> Excellent ability to work in moist conditions >> Good levelling capabilities >> Strong frame made from high grade steel

sales @ jbrockandsons.com

www.jbrockandsons.com

160 www.farmersguide.co.uk January 2020

156 just ads.indd 160

10/12/2019 16:42

Machinery

Newly announced tractor a hit on Norfolk farm Claas Arion tractors are the brand’s biggest sellers, including 7 models from 125–185hp. Recent updates improve performance and functionality, and David Williams visited a Norfolk farm which took delivery of one of the first of the new models. The updated Arion series had its official launch at the German Agritechnica show in November, but several pre-series tractors worked in Europe and the UK last year. The Arion line-up includes 500-series models with a 4.5-litre, 4-cyl engine and the 600-series with a 6.8-litre, 6-cyl power unit and a longer wheelbase. Transmission options include Claas Hexashift powershift or CMatic CVT. Three different specification levels include CIS, CIS+ with Drivestick control, and Cebis with a touch-screen terminal and the CMotion multifunction joystick. The 600-series flagship Arion 660 has up to 205hp available, including 20hp boost through Claas Power Management for PTO and transport tasks. It is available only with CMatic transmission which provides stepless 0–50kph control and includes three virtual speed ranges that can be programmed to suit the need. Separate cruise control speeds can be set for all three ranges. Economy is boosted by two idle speeds; including 650rpm which is automatically selected if the tractor is left idling and stationary. Maximum 50kph travel speed is achieved with the engine at just 1,500rpm and engine ‘droop’ is selectable to achieve maximum performance or increased economy. Lift capacity is 8t at the rear and up to 4t for the optional front linkage. The new Arion 660, which meets Stage 5 emissions regulations, has the same power as current models, but like the rest of the Arion lineup gains improved torque back-up of up to 14 per cent at lower revs. All new 600-series models have improved forward visibility due to a smaller SCR catalyst mounted on the right-hand A-pillar. Cebis-specification tractors have Isobus UT as

standard, allowing the Cebis touch-screen to be used as a universal terminal to set up and operate Isobus-compatible implements. Cebis tractors also offer the ability to link an engine speed memory button to the external PTO selector, which means engine revs automatically adjust to pre-set levels when the PTO is engaged. New cab steps include a flexible bottom rung to avoid damage on rough ground, and an air connection below the cab door offers convenient tyre pressure adjustment in the field or easy blowing down.

Replaced previous brand North Norfolk-based LG Harrison & Son has gradually moved to a Claas tractor-dominated fleet in recent years from another brand. The family’s mixed farm, based at Stiffkey, is run by Matthew Harrison and specialises in early and maincrop potato production, with a contract to supply Norfolk-based Kettle Crisps. Other crops include oilseed rape, winter barley, spring barley, wheat and sugar beet. Beef cattle are reared for fattening or sold on. Claas tractors are bought from and serviced by, local main dealer Manns at Thursford, and models operated currently include Axion 810, 870 and 920 along with Arion 650 and 660 machines. “Previously, most of our tractors were from another single manufacturer, but there was also a Renault 735 which gave excellent ride comfort and, as the predecessor to the Claas range, it encouraged us to consider the brand,” explained machinery operator Stephen Wright. “I do most of the potato harvesting with a Grimme trailed harvester and for that job being able to vary the speed infinitely offered advantages, so we also ran an additional premium brand tractor with CVT transmission.

The tractor’s main user, Stephen Wright, says the cab is well laid out, spacious and quiet.

“By the time it was due for updating last year, we had become used to the Claas tractors and were impressed by their reliability and performance, so we ordered the new Arion 660 CMatic.” It arrived in June and early tasks included mowing hay, manure spreading and moving irrigation equipment. In July it was put to work lifting potatoes with the two-row Grimme harvester at the rear and a front linkage-mounted Baselier topper. “This was the first time I had had a Claas as my main tractor and I’m very pleased with it. It’s reliable and comfortable and the extra power over my previous tractor and our Arion 650 is noticeable. It has been a particularly heavy potato harvesting season due to the wet conditions, but the new Arion did very well, and keeping on top of our own harvest meant we were also able to assist a neighbour by lifting some of his crop too.” By the time of Farmers Guide’s visit, the Arion had clocked up 550 hours and the only issue had continued over…

January 2020 www.farmersguide.co.uk 161

161-162 Class Arion User (097).indd 161

11/12/2019 10:24

Machinery

An air line connector by the cab steps is a useful feature, making it easy to keep the cooling system clear of dust in the field.

The curved rear window provides a good view of rear implements. …from previous page

been a diesel blockage believed to be caused by contaminated fuel. This was promptly cured by replacing the filters. Although the late season lifting was mostly in wet conditions, Stephen said that early harvesting was extremely dry and dust from the front flail in similar conditions previously had blocked the previous tractor’s cooling system, causing overheating. “The Claas remained cool and needed no extra cleaning and that impressed me,” he added.

Comfortable cab Stephen said he very much likes the layout and space of the Claas cab, including generous storage and a good fridge, and he says that even on narrow 380/90R50 rear, and 380/85R34 front tyres the ride is comfortable. “It’s very quiet and the visibility is excellent. I especially like the curved rear window which provides an unobstructed view to implements,” he explained. The CMatic transmission is also a success and auto mode through which speed is controlled by the foot pedal, and Drivestick mode where the hand lever is used to set and adjust the speeds are

preferred for different applications. For harvesting Stephen says Drivestick mode is excellent, allowing the speed to be set and ‘nudged’ up or down for precise control. He likes the CMotion joystick which is comfortable to use, with assignable buttons which can be programmed for a variety of functions and although most of the harvester functions are controlled through a Grimme control panel, the planter will provide opportunities for control through the tractor joystick. The Cebis touch-screen is also proving popular and Stephen said it is very simple to set-up and use, and easy to see in all light conditions. One big advantage of the Claas which has made Stephen’s job easier is draft control for the front linkage. “The previous tractor had only height adjustment, so if the topper dug in on uneven ground I had to operate the hydraulics to lift it. The Claas system allows me to set a suitable pressure and forget it, with the working height constantly adjusted.” Another feature appreciated by Stephen is load-sensing hydraulics, which respond well to demand from the hydraulicdriven wheels of the harvester. “The heavy conditions provided quite a test at times

Storage inside and out is excellent, explained Stephen.

and the Claas system performed well.” Daily maintenance is easily carried out, apart from the engine oil dipstick which requires the operator to squeeze between the front of the cab and the front wheel. The transmission oil is easier to check using a relocated dipstick at the top of the cab steps and the air line connector has also proved useful, as the tractor and harvester spend most of the season out in the field so the on-board air supply is used daily for cleaning down. Adblue is easily topped up through a filler by the cab steps and Stephen said consumption seems very low. The latest Arion has a new front axle and an advantage is the reduced number of grease nipples to lubricate. “I’m very pleased with the Arion 660,” Stephen concluded. “It’s highly manoeuvrable with an excellent turning circle, it’s nimble and responsive and has good acceleration which helps when pulling out from junctions on to the road. There is some transmission noise when pulling hard, but I think this has reduced since the tractor was new. “It’s comfortable, reliable and suits our use well, and we know we can rely on Manns for efficient support.” FG

162 www.farmersguide.co.uk January 2020

161-162 Class Arion User (097).indd 162

10/12/2019 17:11

FOR HIRE MT 765C•95E•85E•75E•55•45&35 all models in stock and available

Available with... GPS Guidance Creep Speed Transmissions Front Linkages Hydraulic Pick Up Hitches

THE LARGEST FLEET OF CHALLENGER TRACKED TRACTORS IN EUROPE all covered by our 24/7 backup service

Hire by the hour, week, month or year – it's your choice

Ian Houlgrave

68272

Tel: 01507 466352 Mobile: 0780 134 3023 Fax: 01507 462812 Email: ian@ianhoulgrave.com

Land Required...

We’re looking for land to apply liquid organic fertiliser. Due to business growth and expansion we are looking to grow our portfolio of farmers. In return for the land bank we offer a free spreading service; 100% black grass free organic fertiliser, low in PTE’s and heavy metals and regulated by the Environment Agency under deployment.

Land Requirements:

• Must have indices of less than or equal to 2 • Locations: Norfolk / Suffolk / Cambridgeshire / Lincolnshire / Leicestershire / Nottinghamshire / Herefordshire / Worcestershire / Gloucestershire • Minimum 40 Ha Free P&K applied • Reasonable road access Free full soil analysis • Grass & Arable cropping

Next steps…

If your land meets the above criteria then please get in touch to find out more 01572 767177 (option 7) Leaders in organic liquid recycling

info@whitesrecycling.co.uk 01572 767177

www.whitesrecycling.co.uk January 2020 www.farmersguide.co.uk 163

159 just ads.indd 163

10/12/2019 17:08

Driving down your fuel costs

Please mention ‘Farmer’s Guide’ when responding to our ad

The Merridale range includes fuel management systems, fuel pumps and dispensers, fuel storage tanks, tank gauges and fuel management software for client and web-based solutions.

Bead Seating Tools

Tyre Repair Materials

Tyre Mounting Grease

Air/Hydraulic Jacks

Tyre Repair Kits

Inflation Gauges 1” Drive Air Impact Wrenches

Tyre Valves

and much more available at: www.tyre-equipment.co.uk

Merridale systems are installed at over 4,000 sites throughout the UK, Ireland, Channel Islands and Holland.

To request a catalogue: Tel: 01905 821697 - 01476 513801 Email: sales@tyre-equipment.co.uk

Up to 400,000 vehicles fuel every day on a Merridale system.

@tyreequipmentco of rts rs pa lie T pp NI su A w R No ity G al qu

AGRICULTURAL ENGINEERS

68692

www.c

▍ Designed to last a minimum of 10 Years ▍ Meets ATEX for diesel standards where applicable ▍ Optional reporting software ▍ Accurate, robust, reliable and up-gradable ▍ UK designed, developed and manufactured

Merridale Ltd Merridale Works ▎Lower Walsall Street ▎Horseley Fields Wolverhampton W V 1 2EU ▎UK Sales Tel. +44 (0) 1902 350 700 Email. sales@merridale.co.uk

Service and Support Tel. +44 (0) 1902 350 701 Email. support@merridale.co.uk

Hilltop Farm, Danethorpe Hill, Newark, Notts NG24 2PD

01636 702524 07976 696712

sales@combinefabs.co.uk

P. BOWERS Construction

For all your building needs... From livestock, grain stores, straw sheds and workshops (industrial and agricultural) All groundworks undertaken, from drainage to concreting! Lagoons and water holding/sewage treatment plants, etc, also carried out

Please call for a chat – we are happy to help where we can

68683

▍ Highest build quality

ISHED d REFURB CONCAVES, n a W E N – in Specialists ARVESTER PARTS PREADERS, etc H S E F F IN A B H C M , CO VES IE S , S E IV N RAPE K ur own & MODELS facturing oVES – ALL MAKES u n a m w o N l ... Y CONCA HEAVY DUOTRDER see website fokr /cdeotanilscaves_user_story.htm MADE TmObinefabrications.co.u All Enquiries Welcome o

07944 272 762 • peterbowers6@gmail.com

www.merridale.co.uk 164-165 News (100).indd 164

06/12/2019 20:12

News

Fuel theft avoided thanks to new system Fridlington Farms has recently praised its newly fitted Merridale fuel and tank management system for helping to prevent fuel theft during a break-in at its premises in Sutton-on-the-Forest, Yorkshire. The family-run business, which supplies potatoes to the likes of Walkers, McCain and Mercian, initially invested in the Merridale MX-M with FuelWorks web-based software to monitor fuel usage and track the economical output of their 25 machines and vehicles. However, not long after installation, it became clear that their investment would benefit them in more ways than just as a useful reporting tool. “The week after installing the system, we had a break-in at the farm. They managed to get away with tools and equipment, but they couldn’t get to the diesel as the system prevented them from activating the pump. If they had attempted it a week earlier, we’d have had no way of stopping them from emptying the tank,”

Fridlington Farms assistant manager, Callum Stark explains. “I even found that the software had sent an alert to my phone warning me of irregularities as the attempted theft was happening, but I unfortunately didn’t have it with me so couldn’t take action at the time.” Prior to the installation the company didn’t have any form of management system in place and, with an average fuel consumption of 20,000 litres per month, rising to 40,000 during busy periods, Fridlington Farms needed to be sure it was getting a reliable package. Speaking of why he chose Merridale, Callum said: “A friend of mine had the system installed on his farm and recommended them to me, so I was confident Merridale were the right people to go with. I know

The thieves were unable to get to the diesel as the Merridale system prevented them from activating the pump. It then sent an alert to the assistant manager's phone.

he would have put every company through their paces before making a decision, so to have a system installed with him showed me how good Merridale must be. “My key requirement when investing in a fuel and tank management system was having the ability to monitor our spend on fuel, but FuelWorks does so much more than just that. I can now

compare each tractor’s efficiency and see if any are under-performing economically or if any drivers are taking out more diesel than they need. With ever-rising costs and fuel theft being a constant threat, these kinds of features are vital.” FG

Redrock Slurry Solutions www.redrockmachinery.com Contact your nearest Agent or Call: (0044) 028 37552390 R Slurry Tankers from 1100 gal to 4500 gal. R High output slurry pumps for mixing ease and speed, pumping from 3000G/min to 4750 G/min. R Tankers can be made to suit 7.5M Redrock Trailing Shoe and Dribble Bar systems.

Tandem Axle Slurry Tanks

Slurry Mixers/Pumps

Single Axle Slurry Tanks January 2020 www.farmersguide.co.uk 165

164-165 News (100).indd 165

09/12/2019 22:11

68658

CONSTRUCTION SERVICES

Grain Storage Handling and Milling Systems

01692 535444 01379 671172

email: andrew@mconstructionservices.co.uk

LOWER OAKLEY, DISS, NORFOLK IP21 4AQ Buildings designed and built to EN1090

• Manufacture of agricultural and commercial steel framed buildings • All buildings designed in-house using Tekla 3-D design software to CE Standard EN1090 with certificate on completion • Buildings erected including groundworks, by our own employed staff • Design and installation of all grain handling and drying equipment • Planning service provided

www.mconstructionservices.co.uk 69059

Are you involved in hedgerow management or tree cutting? If so, you need to see this shear working! Contact us for more information

www.ncdequipment.com

The TMK range now offers shears that fit on 2–30 tonne excavators. The TMK 300 will also fit onto telehandlers. TMK shears can cut between 200mm–400mm softwood and between 180mm–350mm hardwood. Cutting capabilities are dependent on the model of shear being used. Each shear comes with a fixed grapple, which holds onto the cut tree or vegetation before and after it has been cut, allowing the operator to safely place it onto the ground.

“Half the cost, half the time”

Email sales@ncdequipment.com Call Nick 07535 211338 or Emma 07956 087549

166 www.farmersguide.co.uk December 2019

167-168 Stihl (099).indd 166

06/12/2019 20:35

Machinery

First farm test of most powerful battery chainsaw Stihl recently introduced its most powerful battery chainsaw yet, designed to suit the needs of demanding, professional users. Farmers Guide asked a large farming estate to put it through its paces. David Williams reports. Battery-powered chainsaws are rapidly gaining market share; preferred to petrol for their convenience and lower operating noise. Recent models offer extra power and longer working time between charges; making them an alternative to petrol-powered versions and tempting more users to change. There isn’t yet a practical battery chainsaw for those needing larger bar sizes over 16 inches, but for tasks such as felling smaller trees, pruning branches, cutting up firewood and hedge maintenance, Stihl’s new MSA220 model could be a viable option.

Cordless power The MSA220C-B was announced by Stihl in summer 2019 with first deliveries to the UK in late October, just in time for winter firewood preparation. Stihl says the new model is its most powerful cordless chainsaw to date, designed to provide the highest cutting performance and the saw comes with features and build quality to suit professional users. The new saw uses a full chisel 3/8in PS3 chain and is recommended for use with a 14in bar but has approval for bars up to 16in. Operating time between charging depends on the battery capacity and use, but Stihl offers a choice of six batteries with running time of up to 200 minutes. It is fully waterproof and can be used in any weather. Farmers Guide borrowed the demonstration saw from Stihl UK and loaned it to the forestry department of Elveden Estate near Thetford, Suffolk. The 9,100ha estate has more than 4,000ha of arable cropping where the Breckland soils favour irrigated vegetable production along with conventional cereal crops, and 1,400ha of commercial and amenity woodland, much of it in shelterbelts and plantations. For the full-time forestry team, typical tasks include felling, hedge and woodland clearance, firewood preparation and clearing wind-blown

Stihl’s most powerful battery-powered chainsaw so far was put through its paces by Elveden Farms for Farmers Guide. Assistant foreman Jake Rolph is pictured with the MSA220C-B.

branches and trees, with almost all the work at ground level. But from late October the main activity is felling and preparing Christmas trees, and installation teams work with local authorities erecting trees up to 50ft tall in cities, towns and shopping centres throughout the UK. For access as well as health and safety reasons, many trees are installed at night. This means the noise from petrol saws is an issue, so quieter battery-powered alternatives are of interest, but would have to be capable of cutting through and trimming the trunks and thick lower branches of large trees. continued over…

MSA220C-B Recommended bar (inches)

Recommended chain

3/8in PS3

Approved bars (inches)

12, 14, 16

Weight kg (without battery, bar & chain)

2.9

Voltage

Recommended battery

AP300S

Running time (AP300S)

48 mins

Chain oil capacity (cm3)

209

Vibration (EN60745-2-13) – control handle – front handle

0.6m/s2 4.8m/s2

Price – with AL500 high-speed charger

£750

December 2019 www.farmersguide.co.uk 167

166-169 Stihl (099).indd 167

10/12/2019 21:17

Machinery The new saw can take bars up to 16in, although a 14in bar is recommended. Jake Rolph said performance was superior to an equivalent petrol model, with the added advantage of low noise, little vibration and no exhaust fumes.

Excellent performance

…from previous page

Stihl also sent along one of its professional specification smaller petrol chainsaws as a direct comparison. The MS201C-M is a 35.2cc, 1.8kW model with a back control handle and top handlebar, approved for chains from 12–16in. “We have been interested in battery-powered saws for some time,” explained assistant foreman Jake Rolph. “Although Christmas trees are a major activity for a few months in late autumn, we have tasks for which a smaller professional saw could be used all year, but it has to be able to perform to a professional standard. We keep hearing that battery saws’ capabilities are improving but want to be certain that the power and running time are good enough before investing, so were keen to try the latest model.”

Clever design First impressions when the saw arrived were that the new Stihl appeared well made, with a clever design and handles positioned for excellent balance and control. “The battery is one of the heavier components, and because it sits between the control handle and handlebar, it’s always perfectly balanced. It’s easy to fit and remove the battery, just by pressing the release button and lifting it out from the top, so there is no need to lift the saw or turn it onto its side for

access,” Jake added. The saw was put to work felling and trimming in the field, and then with installation teams who took turns trying it at various locations around the UK. The standard Stihl AP300S battery was supplied, which Jake said gave total operating time between charges similar to the running time between tank refills of the petrol saws. Because battery-powered saws consume no power unless they are cutting, all the battery’s capacity is available for work. This contrasts with petrol saws which are started and idle until the trigger is pulled for cutting, and are then often left idling and consuming fuel between cuts. “The battery lasts us a day of intermittent operation but is recharged fully in under 35 minutes,” Jake explained. “It amazed us that so much running time was available from such a quick charge, and it’s very handy. Each morning while the user fills his pick-up truck with diesel, the battery is put on charge and, by the time he returns to the workshop, the fully-charged saw is ready for work again.”

The saw’s performance was also rated excellent by the users. “Obviously our usual saws are much more powerful, with larger chains which cut more quickly and which all out-perform the battery model. So, it helped having Stihl’s smaller MS201 saw with the same 14in chain which provided a fairer comparison,” explained Jake. Performance between the two was similar, but the main difference during cutting was that the battery saw responded instantly the trigger was pressed. With direct drive and no clutch to slip, the chain could cut as soon as the motor started, and the chain's speed could be reduced for added control at any time, without fear of clutch damage. With little vibration and very low operating noise the saw proved popular and the absence of exhaust fumes was also an attraction. Jake suggested that the quieter operation and silence between cuts improves safety as users hear what is going on around them, but additional safety issues could arise. “The battery saw is so quiet that it sounds quite harmless, but it’s not the noisy petrol engine of traditional chainsaws that do the damage. The chain and most other risks remain the same and although we are full-time foresters with a mind-set that appropriate protective clothing is always worn no matter how small the task, occasional users might be tempted to feel this saw doesn’t need the same level of care.”

Simple maintenance The new Stihl proved simple to operate with logical safety features. To use the saw the operator first has to push the front hand guard forward

– which also switches the power on, then depress a lockout button as the trigger is pressed to activate the motor. If the saw is left unattended then the power is automatically cut off, after a short period. Filling the oil reservoir is the same as on Stihl petrol saws, but the chain tension adjustment was a highlight for all the test users. No tools are needed, and the chain can be correctly tensioned in just a few speedy seconds.

The AP300S battery provided equivalent operating time to a full tank of fuel for a petrol saw but, because it consumes no power between cuts, when a petrol saw is usually idling, the total working time available is considerably longer.

’’Brilliant bit of kit’’ Jake concluded that the new Stihl saw is ideal for most typical farm tasks and described it as “a brilliant bit of kit“. “In terms of performance it had the edge over the similar petrol model and quickly created an issue in that everyone wanted to use it. No-one had a bad thing to say about it. If we do invest in something similar, then we would probably go for a range of products including hedge-cutters and strimmers which all take the same batteries, as that would help justify the investment and allow continuous use throughout the day. “For general forestry use we need the power and cutting ability of our usual larger saws, but if there were equivalent battery models we would definitely change,” he added. FG

Chain tensioning is simple and tool-less. Simply unlock the large wing-nut, push the tensioner until the chain is tight, then re-tighten the wing-nut.

168 www.farmersguide.co.uk December 2019

166-169 Stihl (099).indd 168

10/12/2019 21:17

The leading UK The leading UK manufacturer of manufacturer of rubber grading rubber grading screens for screens for all types of all grading equipment. types of grading equipment. •Rubber grading screens • Rubber •Rubber web coversgrading screens •Sample •riddles Rubber web covers •Perforated washer belts

• Sample riddles • Perforated washer belts Contact AGRI-WEB Ltd Tel: +44 (0) 2891275913 Web: www.agri-web.co.uk Email: info@agri-web.co.uk

Contact AGRI-WEB Ltd Tel: 02891275913 www.agri-web.co.uk Email: info@agri-web.co.uk 69096

Stops any leaks Warmer in winter cooler in summer Structural Stabilisation Improves energy costs by half Class 1 Fire Rated Product

Suitable for Storage Units Warehouses Stables Offices and more...

Suffolk Essex Cambridge Norfolk Call now to arrange a free survey RIVA Surveyors

No7 Office Suite, Epsilon House, Ipswich, Suffolk IP3 9FJ

01473 599143 07866 834191

mark.mann@rivasurveyors.co.uk December 2019 www.farmersguide.co.uk 169

167-168 Stihl (099).indd 169

06/12/2019 20:39

Expanded range of cordless machines make a huge difference to operator powered, quiet and easy to use, this efficiency – Makita 18V Lithium-ion brush cutter has been designed (LXT) batteries can be charged in with a U-handle for comfortable 22–55 minutes. LXT has also been use and increased manoeuvrability designed to charge and discharge and features Automatic Torque evenly across all cells, keeping the Drive mode, which increases the battery – and therefore the tool – torque when under increased load, working at its optimum performance. making this brush cutter ideal for A number of Makita’s machines heavy duty applications. are powered by Twin 18V technology, A number of Makita’s machines including the DUR368AZ Brushless include a brushless motor, which Guide [QP] Advert HR.pdf 1 31/10/2019 15:03 U-Handle brush cutter. High produces no friction – this means

NEXT D A

& De-icer

L A U S U S A S S BUSINE DDRESS SAME A NT DIFFERE G BUILDIN

Bourne Rd, Carlby, Stamford, Lincs PE9 4LW

US TOD

Stores Opening Hours

QUALITY ANTI-FREEZE & COOLANTS FOR ALL YEAR ROUND PROTECTION

8am-7pm weekdays 8am-4pm Saturday 8am-4pm Sunday

Contact your local depot or order online while stocks last Offer ends 1st February 2020

Out of Hours 07968 266 479

We’re Here to Help

Tel 01778

69078

that no energy is lost through heat production, making these tools incredibly efficient. With fewer moving parts, tools with brushless motors are smaller and lighter and produce lower vibration levels, thus improving operator safety and reducing fatigue. LXT is used across over 200 Makita tools, meaning that operators can easily switch between tools depending on the task. FG

ELIVERY A

ILA BLE VA

*FREE

Screenwash

Over recent years, Makita has worked to improve and expand its range of cordless machines, using innovations in battery technology. It now produces over 200 cordless products that allow for long run times and the endurance to work through a broad range of tasks. With Makita’s Lithium-ion battery technology (LXT) technology, its cordless machines offer excellent 2019 - Anti-Freeze Farmers run and charge times, which can

590 215 Fax 01778 590 282 www.easternfarmimplements.com

CMY

UNIVERSAL COOLANT

SBS Spares Ltd

K 68661

SPECIALISTS IN USED SPARES

*Order 50 litres of ANY Anti-Freeze & Coolants and get an ALL SEASONS CONCENTRATED 5LTR SCREENWASH FREE!

Valley Farm Pit, Hadleigh Road, Sproughton, Ipswich, Suffolk IP8 3EN Commercial Vehicle Dealers and Dismantlers

*Order 75 litres of ANY Anti-Freeze & Coolants and get an ALL SEASONS CONCENTRATED 5LTR SCREENWASH AND A DE-ICER SPRAY FREE !

Used commercial from vans to tractor units. Always a large stock of 7.5 ton Tippers, Flats, Boxes etc. Box bodies for storage from 10ft to 40ft also containers, Artic Trailers, Flats, Step Frame Boxes and Fridges. Axle wheels, tyres, springs, rams, power packs, engines etc. Artic back end 5th wheel bogies and tipping bodies. Artic tankers, fuel bowsers, low loaders, compressors. Please phone with your requirements and we’ll try to help.

British Manufacturer of Quality Lubricants & Paints since 1921

Email: sbssparesltd@btconnect.com www.sbssparesltd.co.uk

www.withamgroup.co.uk

Tel: 01473 652454

Fax: 01473 652467

REDUNDANT LORRIES & MACHINERY ALWAYS WANTED

170 www.farmersguide.co.uk January 2020

170-173 News.indd 170

10/12/2019 11:14

News

Are you using the right oil in your machinery? The lubrication demands for agricultural machinery is now greater than it has ever been. Using the right quality oil and finding the right type of lubricant for the many types of equipment and machinery is vital. Using the wrong or inadequate amounts of oil can cause machinery breakdowns and unnecessary maintenance costs. Heavy duty engine oils, universal oils and transmission fluids provide reliability to the modern farmer whatever the age and size of the machine. A good lubricant will maximise performance and fuel economy in tough operating conditions and minimise component wear and tear. Lubricants are required for a variety of workhorse applications, from engines to hydraulic and brakes. Modern sophisticated equipment often requires high power at low speeds and compliance to the latest emission standards. In order to meet such requirements, it's important to use a reputable supplier. A credible oil manufacturer should have approvals from the OEM. This helps ensure that warranty conditions

are not jeopardised, and servicing costs are kept to a minimum. Look for endorsements such as membership of the UKLA (United Kingdom Lubricant Association) and membership of the VLS (Verification of Lubrication Specification), which credible lubricant manufacturers should have. Many companies offer online lubricant finder tools that will recommend the oils to meet the specifications for individual vehicles. One such company is The Witham Group – who has an online lubricant finder tool on their website which is free to use. They also offer personal visits where they assess your machinery fleet and advise which lubricants are most suitable in a lubricant survey. The Witham Group has all the various industry endorsements and even has a Royal Warrant

Above: The WItham Group has a Royal Warrant for providing its products to Her Majesty The Queen. Right: The company offers personal visits, where they assess a customer’s machinery fleet and advise which lubricants are most suitable in a lubricant survey.

for providing its products to HM The Queen. The company has been trading since 1921, and specialises in agricultural lubricants, greases and paint. FG

R FOING LE RY AB D IT IN SU RA G

G Baxter & Son Land Drainage Ltd

UK wide installations

68975

A family business with over 35 years experience in agricultural land drainage throughout Yorkshire, We will survey Lincolnshire and the the site and provide surrounding a cost eﬀective solution areas tailored to suit your needs All drainage work is carried out by ourselves and we aim to minimise compaction on agricultural land

STRAW

PELLET

WOODCHIPS

Biomass Boiler suppliers and installers Fully accredited for burning straw

Also installing CHP, Bale Dryers, Heat Pumps

For more information please call Geoﬀ Baxter on

07974 127748

Tel: 01430 828660 Email: info@mancoenergy.com www.mancoenergy.com

69233

Micks Place, Hotham Road, South Newbald, E Yorks YO43 4SU

January 2020 www.farmersguide.co.uk 171

170-173 News.indd 171

10/12/2019 11:15

MS YA

Its unique features make it not only the best mechanical sheep feeder and cattle feeder available, but also the quality and robustness of its design and construction ensures it will outlast any other towed mechanical feeder.

20 20

is used when feeding stock outdoors

69133

e at m us Co see d an

The Logic Multi-feeder

Tracking device leads to SALES – SERVICE – EXPERTISE machinery recovery Independent ATV Specialists supplying New and Used Honda ATVs

Contact: Tom Taylor 01904 758105 • www.tayloratv.co.uk 68818

CURTAIN VENTILATION TO GIVE YOU TOTAL CONTROL OF YOUR BUILDING

• Automatic or manual versions • Systems made to suit any building • 4 zone systems for ultimate ventilation • Optional wind and rain sensors • Over 8 miles of our curtains in operation • Experts in natural ventilation

07795 484100 | S A L E S @ S P R I N G F A R M S Y S T E M S . C O . U K

open instant access to a stream of data transmitted by the connected machine in real time. The new apps provide users with the exact location, fuel level, and maintenance notifications to ease their day to day operations. Users can also contact their local Manitou or Gehl dealer via the apps to arrange work on their machine by a factory-trained technician using genuine parts. All the necessary information is available, including serial number, warranty details, and other information the dealer may need to arrange a service visit or to supply the correct parts. Easy Manager is a tool for dealers or fleet managers, which allows visibility of all machines, their location and current status, as well as highlighting faults that might require preventative maintenance. FG

Terry Johnson Ltd

68937

WWW.SPRING FARMSYSTEMS.CO.UK

The Manitou group now provides the majority of its machines ‘internetconnected’ as standard, one benefit of which is an integrated tracking device. One south coast Manitou dealer recently found the value of this tracker when four machines, with a combined value of £200,000, were stolen from his yard one night. The ‘Connected’ status made it possible for the dealer to track the machines’ every move, and inform the police of where and when they had stopped moving. This allowed police to recover the machines, from a lorry park in East England, and return them to their rightful owner swiftly with no losses. To enable users to connect with their machines, and reap the many benefits, Manitou offers three free apps – MyManitou, MyGehl and Easy Manager. MyManitou and MyGehl

GRAIN FUMIGATION TREATMENTS

Elevators & Conveyors

from our bases in Suffolk & Yorkshire

Sugar Beet Cleaner Loaders

01473 info@alphafumigation.co.uk www.alphafumigation.co.uk 623001

68880

01406 422286 sales@terryjohnsonltd.co.uk

www.terryjohnsonltd.co.uk

172 www.farmersguide.co.uk January 2020

170-173 News.indd 172

10/12/2019 11:10

News

The benefits of biomass Biomass is now the largest source of renewable energy consumed in the UK, according to the Office of National Statistics. Renewable energy now accounts for more than 10 per cent of the UK’s total consumption of heat and power. Considering the UK’s commitment to achieve net zero greenhouse gas emissions by 2050, it is a trend that is likely to continue. With increasing pressure on agriculture to reduce its carbon footprint, Manco Energy Ltd says it is seeing more enquiries from farmers about its Linka biomass boilers, which use organic materials such as straw, crops, wood or even coffee, rather than fossil fuels,

to produce heat and electricity. Biomass is considered carbon neutral as the CO2 released during combustion was absorbed while the plant was growing. As well as helping the environment, biomass boilers can significantly reduce costs – particularly for farmers with their own source of organic material, such as straw, which is one of the cheapest forms of renewable energy, according to Manco’s Andrew Buchanan. Electricity can be produced via the organic Rankine cycle (Electratherm) and used to power the farm, while any extra is exported. Manco’s heat pumps (solid energy) utilise the air/ ground temperature differential, to provide heating and cooling. With recent heavy rainfall, Manco is also seeing a rise in the number of enquiries about its Ventus 2400 bale dryers, which dry down wet bales to an acceptable level so they can be marketed commercially. The incentives are still there. What’s next after the RHI? Who knows! We have had the carrot, so maybe it's time for the stick. FG

Simple solutions to rising energy bills With energy bills ever on the rise and growing pressures to reduce our carbon footprint, installing insulation is important for lowering some of the costs farmers are facing. Riva Commercial says its Walltite closed cell spray foam can cut energy costs in half by reducing the need for heaters in the winter months and keeping a cool ambient temperature in summer, lowering the need for fans or air conditioning. Heating and cooling barns and farm buildings is a big expense, but keeping a consistent temperature is essential when it comes to storing crops and housing livestock. Valuable crops can be lost to frost and extreme cold in uninsulated sheds, while the health, welfare and productivity of livestock can also be negatively impacted by poorly insulated housing. Installing insulation can even help to tackle vermin problems by filling cavities that could be used for breeding. Walltite has zero food value so it is not attractive to vermin, and it controls and depletes mould and fungal growth, eliminating airborne mould spores and allergens. The product is also a

Class 1 fire retardant, meaning it is totally non-combustible, offering reassurance to farm owners that it can help to protect valuable assets in the event of a fire. In addition, it encapsulates high risk hazardous materials – specifically Asbestos types Amphibole Crocidolite, Amosite, Tremosite, Anthophyllite and Actinolite – providing a solution to costly removal so the area can be used with peace of mind. FG

We push the boundaries of spreading to make your fertiliser go further Accuracy and precision in spreading doesn’t start in the field - it starts here in the Amazone technical laboratory. Consider, for example, the peace of mind generated by ArgusTwin, where its radar sensors constantly monitor the spread pattern as it leaves the disc and, if the fertiliser properties change and the pattern loses its accuracy, then the delivery system adjusts automatically to get the distribution precisely back on track. After all, we should know - we have been at it for more than 100 years!

EasySet 2 helps improve the accuracy of the application rate

www.amazone.co.uk

170-173 News.indd 173

Contact your local dealer or phone us on 01302 751200

10/12/2019 11:10

www.borealis-lat.com

Borealis L.A.T Granular AN 33.5 N

HIGH QUALITY NITROGEN FERTILIZER PRODUCING HIGH QUALITY CROPS Borealis L.A.T granulated nitrogen fertilizers are manufactured to the highest standard to guarantee a precise and even spreading pattern allowing the grower greater flexibility throughout the year.

Watch our video and see detailed spreading results on our website www.borealis-lat.com

174 www.farmersguide.co.uk January 2020

174-181 Fertilisers.indd 174

10/12/2019 11:17

Fertilisers & Spreaders

Power on the land

Teagle’s XT series are the only tractormounted fertiliser spreaders built in Britain.

Fertilisers and spreaders is the topic for this month’s Power on the Land, brought to you by Mike Williams. Features providing improved application accuracy are high on the priority list of recent fertiliser spreader developments, and features that can help to improve operating efficiency and increase output are also attracting more customers. A recent development for the Axis range of twin disc spreaders from Kuhn is the Axmat Plus control system using radar technology to achieve improved distribution accuracy. The Axmat equipment, available on the flagship 50.2 EMC+W model, uses 54 radar sensors to scan the spread pattern as the fertiliser leaves the spinning discs. There are 27 sensors arranged in a horseshoe pattern under each of the discs, and the data they collect is assessed by ‘intelligent’ software that can make adjustments at four-second intervals to alter the drop point onto each spinning disc to maintain the optimum spread pattern. Adjustments can compensate for variations caused by external factors and also due to changes in the quality and consistency of the fertiliser, and using the Axmat control also avoids the need to make physical checks on the spread pattern. The Kuhn Axis range covers four tractor-mounted spreader series, all with the Kuhn CDA metering system and with hopper capacities starting at 1,000 litres and extending to 4,200 litres using a hopper extension. Weigh cells to check the hopper contents are available on all the series and Isobus compatibility is offered on the larger models. Trailed spreaders are also available from Kuhn, including the Axent 100.1 model with 9,400-litres hopper capacity and using twin-disc spreading to

provide up to 50m distribution width. Axent spreaders also provide variable application rate and section control technology, and they can be adapted for spreading lime. The new arrivals in the tractormounted L series spreaders distributed by Keith Rennie Machinery are the L15 and L20 Trend models to be shown at this year’s Lamma event. The L series are smaller capacity models in the Trend range with hopper capacities from 700–1,300 litres for the L15 increasing to 2,050 litres maximum for the L20. They are based on the previous L1 and L2 models, but the new updated versions are upgraded to allow easier maintenance and simplified cleaning. The improvements include a water jetting point to help clean fertiliser traces from the hard-to-reach areas, and the larger M series spreaders from KRM have already been given a similar maintenance update. For the new L series models the updates should encourage improved maintenance, with reduced cleaning time while extending the spreaders’ working life. Both L series spreaders feature a three-year gearbox warranty and the L20 model can be supplied with weigh cells fitted. Maximum spreading width for the new Trend spreaders is 18m for the L15, increasing to 24m for the L20, but this goes up to 42m for the M series Trend models which are all available with weigh cells. The hopper size for the flagship M60W Trend model is 5,500 litres, said to be the biggest capacity mounted spreader available. Other features available on the larger machines continued over…

New L15 and L20 spreaders from Keith Rennie Machinery have design features to make cleaning easier and more efficient.

The radar-based Axmat Plus control system from Kuhn is available on Axis 50.2 series twin-disc spreaders.

C J SMITH

Agri-Spray & Spreading Contractors LGP Crop Spraying Avadex granule application LGP Fertiliser Spreading

Washbrook Farm, Nash, Milton Keynes 01908 502386 / 07831 479966 email: cjsmithagrispray@btconnect.com

68935

January 2020 www.farmersguide.co.uk 175

174-181 Fertilisers.indd 175

10/12/2019 11:18

KUHN

Fertilisers & Spreaders A free set of mats for checking spreading accuracy is available with someAmazone spreaders bought before the end of January.

…from previous page

include GPS capability and variable rate spreading. The Amazone company filed their first fertiliser spreader patent in 1915, and since then they have been one of the leading manufacturers with a current range that includes both tractor-mounted and trailed machines. Recent developments include introducing the WindControl feature that checks the wind speed and direction and automatically adjusts the spread pattern to

compensate. WindControl is an option on Amazone’s ZG-TS ProfisPro trailed spreader that was introduced last year with a choice of 7,500- or 10,000-litre hopper capacity. The special features include an ‘intelligent’ weighing system that provides online and on-the-move calibration, using data from four weigh cells plus a built-in tilt sensor, and offering the capability to make an instant response to variations in the fertiliser characteristics or changes in the weather conditions. Developments from Amazone this

year include the HeadlandControl software introduced on ZA-TS series spreaders, allowing the switching-on and off positions to be adjusted to increase or reduce the overlap for improved accuracy during headland turns. Also new this year is the ZA-V Profis Control spreader, an entry-level model with capacities ranging from 1,400–4,200 litres. It has a maximum spreading width of 36m and weigh cells are included on the equipment list. The ZA-V series plus the ZA-TS and ZG-TS spreaders are available under a special offer programme that includes a free set of Easy Check mats used to make a simple on-farm assessment of the spread pattern. The mats are available with new spreaders bought before the end of January 2020. Teagle Machinery offers customers a choice of spreader ranges including the Centerliner series that features the five recently introduced SXi and SXe models with hopper capacities ranging from 1,580–3,650 litres and up to 24m spreading width. A special feature on the SXi and SXe spreaders is the Easytronic system,

offering increased spreading accuracy with a touch-screen control unit to provide a list of functions that include forward speed monitoring with the data used to maintain the required spread rate. GPS compatibility allows mapping to be used, there is a control option for spreading beside field borders and the SXi models are equipped with weigh cells. All the Centerliners, including standard SE series models, have spreading components made of stainless steel and the options list includes an agitator to reduce blockage risks when spreading grass seed. The XT series spreaders are made at the Teagle factory in Cornwall and are now the only tractor-mounted fertiliser spreaders built in the UK. The three models are designed for small to medium acreages, with hopper sizes from 660 for the XT20 model with a single spreading disc, while the twin-disc XT24 and XT48 models hold 675 and 1,350 litres and have a 12m spreading width. XT features include a main frame that is shot-blasted and powder coated for a longer life, the plastic hoppers are corrosion resistant and the bolton design allows easy removal for cleaning and non-wearing parts are covered by a three-year warranty. FG

-Beet

Sugar beet fertilisers with unique ingredients Prescription range of fertilisers designed for high-yielding, highquality sugar beet crops. Made in Great Yarmouth from unique ingredients.

Wolf Trax(R) Magnesia-Kainit(R) Polysulphate(TM) Available in bags, bulk or delivered and spread

Advanced nutrition for enhanced performance

t:03333 239 230 e:enquiries@originfertilisers.co.uk www.originfertilisers.co.uk

@originfert

176 www.farmersguide.co.uk January 2020

174-181 Fertilisers.indd 176

10/12/2019 11:18

KUHN SB Series A4 Farmers Guide Lamma.qxp_Layout 1 26/11/2019 05:04 Page 1

SB SERIES

High capacity, high density baling

Extreme density baling - SB 1290iD

• Patented TWINPACT double plunger system • 25% higher bale density with comparable loading to conventional baler • Ideal for energy crop production, haulage and storage

• Fully ISOBUS compatible SB models offering 80 x 90cm, 120 x 70cm or 120 x 90cm square bale options • 15% higher intake capacity than earlier LSB models • Sophisticated load monitoring system allows extra bale weight for greater efﬁciency • Double knotter and electronic twine monitoring suitable for extreme density bales • Intelligent new design optimises accessibility, safety and operator comfort

forage harvesting I livestock husbandry I arable I landscape maintenance

be strong, be KUHN 13:02

174-181 Fertilisers.indd 177

www.kuhn.co.uk 07/12/2019 14:28

Managing late drilled wheat crops Yara's head of agronomy, again – however, nutrients will Mark Tucker (right) be at their lowest availability, explains that, where especially in the rooting drilling of winter zone. The first spring wheat has been management action delayed, the is to apply an appropriate fertiliser crop nutrition (late February) to strategy should meet this nutrient be adapted to help recover the demand. The phosphate lost yield potential. With delayed drilling source is particularly important and needs to be comes two issues. Firstly one that is not immediately the soil state as a growth medium ‘locked up’ (TSP, MAP, DAP based is much poorer. Secondly, more fertilisers), and gives continuous than four weeks of the growth supply, for example YaraMila with period has been lost. The latter P-Extend. Coincide this with a is crucial, as the fundamental for foliar phosphate such as YaraVita yield attainment is crop biomass. Magphos K to accelerate the early One of the key paths to spring growth. achieving high biomass crops is The second spring the management of the early stage management action should be of crop development. A Yara crop to apply a higher nitrogen rate at nutrition strategy can be used as a this first timing. Higher nitrogen remedy, helping to recover some rates give faster leaf and tiller of the lost yield potential. Such a development to recover the strategy requires a combination biomass lost. A uniform NPKS of actions to increase early spring compound can be selected, and growth rates, involving fertiliser the foliar application can made and foliar applied nutrients. When in a tank mix with other crop the soils start to warm up, and A5 Corporate Openfield.qxp_Layout 1protection 04/12/2018 10:09 Page applications. FG 1 reachLSCPE 5ºC crops will begin to grow

Explore the benefits of liquid fertiliser In recent years the popularity of liquid fertilisers has soared, with more and more farmers turning to the liquid alternative. Omex offers a full range of liquid fertilisers – Suspension, Solution and Foliar. The company says its liquid range boasts a variety of benefits, for example liquid fertilisers are fast acting, meaning the crop is immediately able to absorb the nutrients it needs which, in turn, gives an improved crop response. Unlike granular application, liquids can be applied evenly and accurately across the crop, right up to the field edge,

making it completely uniform and allowing for accurate controlled application. There is also no heavy bag handling or bag disposal, and thanks to Omex SAP and soil testing services you can ensure the crop receives exactly what it needs. The Omex team is equipped with Facts-qualified agronomists, highly skilled trials officers and expertly trained lab technicians; you can supply the full season’s nitrogen in one simple pass. Omex offers a full range of services to help support the grower in achieving maximum yield potential. FG

Seed, fertiliser, grain, storage.

The Openfield Partnership: More than just grain.

Premium products and services to help get the best for your business.

As Britain’s only National grain marketing co-operative, we’re committed to putting our members’ needs first. Our range of innovative and flexible marketing tools are designed to help you manage risk and enhance your crop values. We also provide storage facilities, a wide selection of seed varieties and the best-quality fertiliser. To find out more, call your local Farm Business Manager on 01476 862 730.

www.openfield.co.uk 174-181 Fertilisers.indd 178

10/12/2019 11:19

Fertilisers & Spreaders

Order fertilisers early in case of high demand

Prolonged heavy rainfall across the UK has posed serious challenges for farmers this autumn, making drilling winter cereals impossible for many and hindering the lifting of root crops. Openfield’s fertiliser manager Lucy Hassall said this could also create problems when it comes to fertiliser. Speaking at the end of November, Lucy said recent weather conditions are one of the biggest focus areas for Openfield at the moment, as growers are struggling to get crops in the ground due to the high volume of rainfall. “Conditions have been really challenging for growers and many are still in the position of not knowing what area they will get drilled and what their final cropping will be,” she explained. “This makes it very difficult for farmers to calculate their fertiliser requirements for the

coming season, which could lead to purchasing being left until well into the new year, creating logistical problems in terms of getting product out to farms on time.” She continued: “Of the crops that have been established, they are now sitting in very wet or waterlogged soils which will impact on both soil structure and the root development of crops, making it vital that growers pay particular attention to their nutrition programmes. This should start with testing soils for available nutrients – both macro and micro nutrients – with a broad-spectrum soil test. “Nitrogen programmes will be particularly important to get right this coming season if crops are to reach their yield potential. This should start with an N-Min soil test to establish the amount of N in the soil which will become available to the crop. We had relatively high yield at harvest which will have removed high amounts of nitrogen and that has been followed by extremely high autumn rainfall, meaning N soil levels could be lower than average.” Lucy advised growers to purchase their fertiliser requirements and have them in the shed as soon as the crop is in the ground, not only to have product ready for when it is required but to also avoid any potential price increases that could arise, should we have a high demand in the spring. FG

Take control of crop yields... ...with a spring application of

YaraMila ACTYVA S ™

• Increase wheat yields by 0.5 t/ha* • Increase oilseed yields by 0.67 t/ha* • Improved root development and subsequent crop growth *based on the results of 2016 trial data

Search for Yara Rewards or scan QR code to join Yara Rewards Programme

@Yara_UK Yara UK

174-181 Fertilisers.indd 179

agronomy.uk@yara.com www

www.yara.co.uk

10/12/2019 11:19

Fertilisers & Spreaders

Matching the needs of crops As part of ICL’s vision for a more sustainable way of farming, controlled release fertilisers (CRFs) can improve efficiency, economy and ecology. Agromaster and Agrocote employ ICL’s patented E-Max technology. Nutrients are released in a more precise manner, helping to match crops’ needs while limiting nitrate leaching. ICL’s technical sales manager Dr Richard Collins says: “Trials have shown CRFs can significantly increase the efficiency of nutrient use, and as a result improve crop yield and quality in specific climate and soil conditions around the world. E-Max technology enables a very thin coating to be added to a urea fertiliser granule to keep the nutrient level very high, while assuring a very good release curve during the crop growing season. In the case of Agromaster, typically 30-40 per cent (but can be higher – 60 per cent) of the N is coated and released over a two- to three-month period − depending on longevity of the product selected − even if rainfall is high, without leaching away

New £5m liquid fertiliser terminal for East Anglia

from the root zone. The release is controlled by temperature only. The remaining N is uncoated, promoting early development. Agrocote is ICL’s fully coated, controlled release urea product. “Agromaster and Agrocote offer tremendous benefits for growers,” continues Dr Collins. “In specific growing conditions, such as sandy and loamy soils and regions where there is substantial rainfall during the growing season, nutrient use efficiency is obviously higher. These two ICL product ranges can significantly improve yielding and crop quality while potentially reducing fertiliser applications. FG

Brineflow has developed quayside storage and a new manufacturing terminal for its Nitrasol UAN fertilisers, which has been built to the most stringent environmental standards whilst being capable of dispatching over 2,000t/day in the peak spring season. Managing director Ian Ferris says: “The move to liquid nitrogen is accelerating. We can deliver liquid direct to tanks strategically located around the farm and on outlying holdings to make the task of storage and application straightforward. Unlike solid granules, liquids can be applied in all weathers and there are agronomic benefits which makes the nitrogen available to the plant for longer, especially in a dry spring. “Our Nitrasol system is the only one where the liquid nitrogen is exposed to the atmosphere for

the first time at the point of application to the crop. As ammonia emissions face statutory control and taxes on plastic bags are mooted, we have taken the liquid fertiliser industry forward by addressing the ultimate concerns of the consumers who purchase farm-gate products. To encourage a move to the liquid system, Brineflow offers a number of tank rental options or can advise on the environmentallycompliant installation of new tanks on the farm. Brineflow encourages visitors to the new terminal to demonstrate and discuss how the company can help farms become more productive and profitable whilst demonstrating environmental and social responsibility to those who need to be persuaded that modern agriculture is a force for good. FG

The most complete range of triple-filtered liquid nitrogen fertilisers distributed from the UK’s most modern & efficient fertiliser terminal delivered directly to tanks on your own farm.

Nitrasol is the liquid fertiliser brand of Brineflow Ltd Brineflow Ltd, Ferry House, South Denes Road, Great Yarmouth, Norfolk, NR30 3PJ Sales Enquiries 01493 809828 General Enquiries 01493 809820 Email sales@nitrasol.co.uk web www.nitrasol.co.uk 20191203AngliaFarmers.indd 1 174-181 Fertilisers.indd 180

03/12/2019 12:05:49 10/12/2019 11:20

ICL G

05:49

Go Liquid The beneﬁts of Liquid Fertiliser Fast Acting Uniform Application Convenience Liquid N with Didin means full application in one pass

Call 01526 396 000 Visit www.omex.co.uk @OMEXCompanies

/OMEXCompanies

Grow

Wetting & Water Conservation Agent

Nurture Sustain

H2Flo has been trialled and tested on multiple potato crops over successive years. Results show that using H2Flo can increase yields or be used as a water conservation agent by reducing irrigation and maintaining yield.

Come and visit us at

“I’ve been working with H2Flo for over four years and growers are seeing good results with significant boosts to yield as well as quality,” – John Cairns, Agronomist ProCam County Crops

Lamma 2020, Hall 10, Stand 10.902 7th & 8th January 2020, NEC Birmingham

For more information please visit www.icl-sf.co.uk Call +44 (0)1473 237 111 Email prof.sales@icl-group.com Web www.icl-sf.co.uk www.icl-sf.ie

ICL Group A5 1pp Advert181 Design - Lamma 2020.indd 1 174-181 Fertilisers.indd

18/11/2019 10:39 13:02 10/12/2019

BREEDING BULLS FEMALES & SEMEN AVAILABLE

FIND US ON...

C Fabb 1 Shelley Pebbles & Fabb 1 Sweet Flora C - 2019 Designer Genes Entries -

01487 822 224; Helen - 07584 035 080; Helen@fabbherd.com Wilsons Orchard Farm, Fenside Road, Warboys, Cambridgeshire, PE28 2TY

Livestock 182-187.indd 182

Bulls available with outcross genetics and great EBVâ&#x20AC;&#x2122;s

07/12/2019 16:47

Livestock

A closer look at genomic testing Rachael Porter explores how an innovative genomic test from Zoetis can boost dairy herd health and profitability, and speaks to two farmers who have both used genomic testing, with completely different results and views. Genomic testing of heifers could allow dairy producers to take herd breeding programmes to the next level – significantly improving the efficiency, productivity and sustainability of their business. Zoetis’ Clarifide Plus test is the first dairy genetic evaluation available in the UK that specifically includes proven cow and calf health and wellness traits in Holstein and Jersey cattle. And it is the only genomic test to incorporate these traits with the production traits, which are delivered by standard testing. “This evaluation tool allows producers to genomically select heifers, and cows, for breeding based on their risk of developing any of six key production diseases, including: mastitis, lameness, metritis, retained placenta, displaced abomasum, and ketosis,” explains Zoetis vet Dave Armstrong (right). The test also offers information on the likelihood of heifers’ calves developing scours or respiratory disease, or calf mortality. The test comprises an Allflex

“

Cows selected using the test results are 106 per cent more profitable during their lifetime. tissue sampling kit, which takes an ear notch from the animal. This is then sent off to the lab for analysis. Hair follicle samples can also be sent off for testing. The test and results reveal a Dairy Wellness Profit Index (DWP) for each animal. DWP is based on lifetime productivity and health, giving an overall view as to how profitable a cow is likely to be. Results are accessible via an online analysis tool, called SearchPoint. This allows producers to determine which animals will be most profitable on their farm. Standard genomic testing allows for a prediction on an animal’s potential, but this test gives

a prediction on the animal’s ability to remain healthy and fulfil its potential. “DWP incorporates production, reproduction, health, type and wellness making it ideal to base your cow selections on,” says Mr Armstrong.

Potential cost savings On UK farms, the difference in lifetime profitability between the top and bottom 10 per cent of animals ranked by DWP is around £1,029. When the top third of cows are compared with the bottom third for individual wellness traits there is: 38 per cent less incidence of retained placenta; 76 per cent less incidence of metritis; 49 per cent less incidence of lameness; and 49 per cent less incidence of mastitis. “Cows selected using the test results are 106 per cent more profitable during their lifetime, compared to selecting by parent average. And those in the top 25 per cent are, on average, more than twice as likely to stay healthy as cows in the bottom 25 per cent,” he adds. He advises producers to begin by testing all heifers under 12 months old: “Breeding decisions have already been made for in-calf heifers and cows in the milking herd. Testing at birth

means that it can quickly become part of the management routine and, more importantly, it can help producers make decisions about heifer rearing and breeding. For example, they can accurately select the best heifers to rear as replacements and pick out the ones to sell as calves. “If producers choose to rear all their heifer calves then, to give another example, the test will highlight which ones should be used for rearing replacements with sexed semen, while the lower-end heifers could be put to a beef sire.” It costs around £2.30 a day, typically £1,800 in total, to rear a continued over…

January 2020 www.farmersguide.co.uk 183

Livestock 182-187.indd 183

09/12/2019 22:30

Zoetis receiving the Product Innovation Award at AgriScot in November 2019.

…from previous page

dairy heifer replacement, with the payback on this investment taking until the middle of her second lactation. “So, by predicting a heifer’s ability and health earlier, producers can decide which heifers to ‘invest’ in. If they choose, for example, to sell the bottom 15 per cent of heifers as calves – say 15 calves out of 100 – then they’d save £27,000. And that’s just the start. “The heifers that they do keep and rear to calve at 24 months will be healthier and remain in the milking herd for longer, which will not only increase efficiency and sustainability, but will also significantly increase the herd’s overall rate of genetic gain.” Mr Armstrong says that solely looking at genetic return on investment ratio is typically 6:1. “But it can, and often is, much higher. Include reduced heifer rearing costs, vet and med and labour costs, because cattle are healthier, and the improved production and efficiency that goes hand-in-hand with that, and you’re looking at a close to a sixfigure sum return on a test that costs around £39 per head. “When I go through the potential cost savings and benefits with producers they say often say ‘no way’.

This technology really can have a significant impact on dairy breeding and, ultimately, business profitability and sustainability.”

Uptake on dairy farms So far around three per cent of the UK herds test heifers – some test all females – to aid breeding decisions and sire selection. “We’re seeing a steady uptake as producers begin to see and understand the huge benefits on offer for what is actually a small oneoff investment,” says Mr Armstrong. “That said, around 25 per cent of producers still rely solely on parent averages when making breeding decisions. But this method has a reliability of around 25 per cent, compared to 68 per cent for genomic testing. And the other 72 per cent of producers still go by eye, which has a reliability of less than one per cent, when it comes to breeding decisions.” One US producer, Tom Oesch (right), told Mr Armstrong that he wouldn’t be able to make breeding decisions, or farm efficiently, without Clarifide Plus. Genomic

testing has nearly halved the vet and med bill on his unit – where he milks 2,200 Holsteins – from £180 to £100 per cow per year. Tom recently visited the UK, to share the improvements to his herd’s health and productivity during a series of roadshows. Since he began using the test on all females in the herd in 2012, he says he’s seen fewer herd health issues and believes this is the result of genetic improvements and management changes. By highlighting cows more prone to metritis, the herd has seen a 77 per cent reduction in prevalence from the worst group to the best group. Genomic testing has also highlighted a difference in milk yield of 2,864 litres between animals in the top and bottom 25 per cent. “Cows and heifers performed exactly as the genomic test predicted, despite the same management conditions,” Tom says. “The animals that showed increased health issues were the ones that the test also identified as being potentially problematic.” Meanwhile, Northamptonshirebased producer Haydn James used another genomic test through his semen company on all heifers back in 2016, for just one season. He runs the 175-cow Chalkhill herd of pedigree Holsteins, plus 140 followers, near Wellingborough. He says it cost around £29 per animal – a fraction of the cost of rearing a heifer – but for him, it was very much a one-off investment. “We didn’t repeat it the following year with the next crop of heifers. I think it served its purpose, for us, by confirming that we were already breeding from our

best stock. Genomic testing didn’t highlight any ‘outliers’ that we may have overlooked. There were no surprises and I’m happy with the cows and heifers that I have now – and the breeding decisions that we’re making.” He explains that black-andwhite sexed semen is used, to breed replacements, on the top 50 per cent of the herd. Beef sires are used on the remaining 50 per cent. “And that’s the approach that we’ve taken for the past five years. The herd’s average yield is 10,400 litres, at 4.04 per cent butterfat and 3.35 per cent protein, on twice-a-day milking.

“Using genomic testing technology confirmed that we’d been making good decisions based on our own judgements, but we may re-evaluate this in the future. It’s important to keep an open mind.” Zoetis says work is ongoing to add more information to the test. The Jersey test already includes an additional health trait – milk fever, as this is a particular problem in Jerseys and impacts on profitability. FG

NO FIREARMS PERMIT REQUIRED Whitesbridge Farm • Margaretting • Ingatestone • Essex • CM4 9JT

AGRICULTURAL LIVESTOCK EQUINE EQUIPMENT & ACCESSORIES

Opening Times Mon–Fri 8:30am–5pm Sat 8:30am–1pm www.facebook.com/ dissupplies/

We are suppliers of Shearwell Tags

Animal Health Products Ear-Tags • Electric Fencing Wooden & Galvanised Gates Stock Fencing • Barbed Wire & Posts Drinking Troughs • Pipe Fittings Clothing & Footwear Kids Farm Toys

di@dissupplies.co.uk

69040

Tel:

01277 356881

SUITABLE FOR FARM ANIMALS OF ALL SIZES

www.dissupplies.co.uk

01635 253344 sales@raytradeuk.co.uk www.raytradeuk.co.uk

69114

184 www.farmersguide.co.uk January 2020

Livestock 182-187.indd 184

09/12/2019 22:31

PROTECH MACHINERY

EVO1 120o slew extending track Stand 921 Wire unroller with drop down hinge

Centre post frame

Front post frame • 300kg hammer • 75mm dia rock spike and extractor kit • 1m tele mast extension, max working height under cap 3950mm • 500mm sideshift • 2 way mast tilt • Transport position • 48hp Yanmar engine • Poclain transmission • Hydraulic mast leg • 1.6m outside track width • 400mm wide tracks • 500mm track extn so 2.1m outside track width • Foot stand and tow bar • 60 or 120 deg slew

tow bar

• Ignition • High & low speed tracking • Electric throttle switch

• Full rear controls • Servo tracking controls • Post driver controls • Park brake and emergency cut off • Auger drive with auto drill function • Auger sizes up to 250mm dia

Andrew 07971 079751•Steve 07974 956716 PROTECH MACHINERY LTD

Vis it o fu ur w ll p e rod bsi uc te t tr os an ee ge ou r

FOR PROTECH SALES PLEASE CALL

OTHER FEATURES INCLUDE... • Lowered rear idler for increased contact area, sealed bearings in all undercarriage running gear • Wire unroller with drop down hinge for easier loading of larger rolls

Woolridge Farm, Gloucester Road, Hartpury, Gloucestershire GL19 3BG British Built at Unbeatable Prices

e-mail: sales@protechmachinery.co.uk www.protechmachinery.co.uk

69060

Livestock

Greater cow comfort, better yields Choosing the right bedding for housed dairy cows can have implications not just for animal welfare, but also for milk yields. A cow produces 1.6 litres of milk for each extra hour she spends lying down, thanks to the energy saved from laying as opposed to standing. With this in mind, Rock Resource Management says it is important to select the most appropriate, comfortable bedding for your herd, to encourage more laying time. The company says its livestock bedding is comfortable, hygienic and ultra-absorbent, drastically reducing the time and cost of mucking out. It is also fully biodegradable and made from 100 per cent recycled materials, making it more environmentally friendly – which is a particular focus for Rock Resource Management. All of its products help to reduce their customers’ carbon footprint. The bedding can even be processed and used as manure on the fields when it is no longer needed. Similarly, the company’s Rock Blocks and Rockcrete Ready Mix Concrete are made from recycled or reclaimed raw materials, offering a more eco-friendly alternative to

traditional concrete blocks. Applications in agriculture include building trespassing barriers from the Rock Blocks and animal pens using Rockcrete. The innovative Rock Blocks fit together in a similar way to Lego bricks and require no cement. Meanwhile, Rockcrete is supplied across the UK 24/7 and customers only pay for the concrete that is laid. FG

69082

Rock Blocks©

LIVESTOCK BEDDING HIGH QUALITY  NATURAL ODOUR  ABSORBENT  BIODEGRADABLE  ECONOMICAL 

STORAGE BAYS  NOISE BARRIERS  FLOOD DEFENCE SYSTEMS  FIRE BREAKS  RETAINING WALLS  PARTITION WALLS  SUPPORT STRUCTURES 

Rockcrete©

The livestock bedding supplied by Rock Resource Management is comfortable, hygienic and ultra absorbent. This product will drastically reduce the time and cost involved in mucking out.

ONLY PAY FOR WHAT WE LAY  NO WASTE  WE SUPPLY TO BOTH THE TRADE & DIY SECTORS  ONLY TOP GRADE QUALITY MATERIALS USED  WHEELBARROW SERVICE AVAILABLE  PUMPING SERVICE AVAILABLE  24/7 SERVICE 

0800 015 4711 • www.rockresourcemanagement.com January 2020 www.farmersguide.co.uk 185

Livestock 182-187.indd 185

11/12/2019 10:41

Livestock

Limousin heifers take the limelight at Winter Stock Festival Limousin heifer Brockhurst Oriana won top beef honours at the Winter Stock Festival at the East of England Showground in late November. Clemmie Gleeson reports.

Overall commercial beef champion, Limousin Brockhurst Oriana.

Phil and Sharon Sellers bought the now 18-month-old after the Bucks County Show, at which Phil had judged the Commercial beef classes and chosen Oriana as champion. Phil explained that he now had a ‘hobby herd’, having retired from full-time farming. He and his Sharlock herd of 12 cows are based at Thorpe Tilney near Sleaford. Judge Jason Wareham said that Oriana had “lots of style and show character and will be a lovely body of beef”. Reserve beef honours went to Kevin and Dawn Ludgate from Tebworth in Bedfordshire for their 16-month old heifer Tinkerbell. Shown by the couple’s 16-year-old son William, the 582kg home bred heifer is ¾ Limousin and home-bred. Her dam was Big Bum who had a successful show career herself, winning several commercial beef titles in 2008. “She will now go back into calf and back into the herd,” said Kevin. The judge said that Tinkerbell was a “really stylish black show heifer which handled well.”

Baby beef supreme champion, Limousin cross Frankel.

Baby beef championship went to Ben Beckitt for Limousin cross Frankel with David Plested’s Red River in reserve. Judge Jason Wareham said the champion had “a bit more style about him” and praised his presence and ‘showiness’. Meanwhile in the sheep rings Robert Priestley and Sarah Garth took top and reserve honours with Beltex cross and pure bred Beltex pairs. They also took the reserve continental championship with a Dassenkop pair. Robert and Sarah have a flock of 150 ewes in North Yorkshire and brought nine pairs to the festival. Judge Andrew Atkinson said that the supreme champion lambs were “an outstanding pair – a perfect modern day butchers’ lambs.” The champions later fetched £380 in the sale ring while the reserve champions went for £300. Supreme championship honours in the pig rings (single and pairs) went to Chris Hudson for his Landrace cross Pietrain pair of July gilts. Homebred, they are from his Maerose herd based at Claypole near Newark. FG

Supreme champion Pietrain x Landrace pig (single and pair).

Beef (Judge Jason Wareham, East Sussex) Supreme commercial beef champion Sup. P. & S. Sellers, Brockhurst Oriana (Limousin); res., K.W. Ludgate, Tinkerbell (Limousin cross) Champion native Sup. G. Fountaine & P. Bodily, Quinbury June (Beef Shorthorn); res. Trehudreth Farm, Trehudreth Jackie (Lincoln Red) Champion continental Sup. P. & S. Sellers, Brockhurst Oriana (Limousin) Champion pure bred beast Sup. P. & S. Sellers, Brockhurst Oriana (Limousin); res. G. Fountaine & P. Bodily, Quinbury June (Beef Shorthorn) Heifer champion Sup. K.W. Ludgate, Tinkerbell (Limousin cross); res., A. Dickinson & L. Powdrill, Black Magic (British Blue cross) Steer champion Sup. P. & S. Sellers, Yogi (Limousin cross); res., M. Dickens & Family, Crunchie (Limousin cross) Crossbred champion Sup. K.W. Ludgate, Tinkerbell (Limousin cross); res., A. Dickinson & L. Powdrill, Black Magic (British Blue cross) Baby beef native champion B. Beckitt, Blue Lagoon (Aberdeen Angus); res., Warmington Beef Shorthorns, Warmington Vigor (Beef Shorthorn) Baby beef continental champion Sup. B. Beckitt, Frankel (Limousin cross); res., D. Plested, Red River (Limousin) Baby beef champion Sup. B. Beckitt, Frankel (Limousin cross); res., D. Plested, Red River (Limousin) Pedigree calf interbreed champion (Judge D. Thornley, Derbyshire) Sup. R.&.C. Rettie, Retties Eveline (Aberdeen Angus); res., J.& B. Borlase, Sacombe Jacinta (Simmental) Pigs (Judge Richard Taylor, Derbyshire) Supreme champion pig Sup., C. Hudson (Pietrain x Landrace) res., C. Bull (Berkshire) Supreme champion pair Sup. C. Hudson (Pietrain x Landrace) res., C. Bull (Berkshire) Champion modern Sup. K. & B. Arden (Landrace) Champion traditional Sup. C. Bull (Berkshire) Champion cross bred Sup. C. Hudson (Pietrain x Landrace) res., E.C. Hartop (Landrace x Duroc) Champion modern pair Sup. K. & B. Arden (Landrace) Champion traditional pair Sup. C. Bull (Berkshire); res., K. & B. Arden (British Lop) Champion crossbred pair Sup. C. Hudson (Pietrain x Landrace); res., M. Wilson (Pietrain x Saddleback) Lambs (Judge Andrew Atkinson, North Yorkshire) Best pair of continental pure bred lambs Sup. R. Garth & S. Priestley (Beltex); res. R. Garth & S. Priestley (Dassenkop) Best pair of native pure bred lambs Sup. C.D. Timm (Suffolk); res., D. Burton (Southdown) Champion pair of pure bred lambs Sup. R. Garth & S. Priestley (Beltex); res. R. Garth & S. Priestley (Dassenkop) Best pair of butchers lambs Sup. & res. Garth & S. Priestley (Beltex cross) Supreme champion pair of lambs Sup. R. Garth & S. Priestley (Beltex cross); res., R. Garth & S. Priestley (Beltex) Breeding ewe lamb (Judges Mr C. Marwood, N Yorkshire & Mr G. Taylor, Cumbria) Sup. The Geary Family (North Country Mule); res., H. Williams (Beltex)

Overall reserve beef champion, Limousin cross Tinkerbell.

The supreme champion lambs were "an outstanding pair".

All photos by Tim Scrivener.

186 www.farmersguide.co.uk January 2020

Livestock 182-187.indd 186

09/12/2019 22:21

www.FarmAds.co.uk BUY & Sell for FREE â&#x20AC;&#x2DC;til the cows come home

Browse machinery, equipment & livestock 24/7... Livestock 182-187.indd 187

07/12/2019 19:48

A. DOWNING

68792

A.E. Kiddy & Son

AGRICULTURAL ENGINEERS & MACHINERY TRANSPORT

68786

• LGP 12/24m spraying & liquid fertiliser application with GPS • Claydon drilling – all combinable crops, cover crops, forage crops, etc • Grassland operations/paddock maintenance • Telehandler with operator • Tractor with operator – 160hp, wide tyres, GPS steering Please phone Edward to discuss

Carlton Farm, Cattle Dyke, Gorefield, Wisbech, Cambridgeshire PE13 4NR UK NATIONWIDE EUROPEAN Tel: 01945 410099 • 07850 731409 www.adowningengineers.co.uk LOW LOADER SERVICES

Mobile Concrete

www.cgmltd.co.uk

0800 160 1199

01366 388738

• Flailing & Hedge Trimming on river banks, reservoirs fields & margins • Circular Saw Attachment available • Control of In-Channel Weed and River System weed cutting and clearance • Identification and Control of Invasive Species • Supply of Waste Containers and Skips • 360o Earth Moving & Clearance with long reach & tree shear capabilities • Tree Felling & Maintenance & stump clearance • Haulage of Equipment & Machinery with Hiab capability

68769

Unique self-contained, self-loading machine working in Suffolk/Essex/Norfolk

68784

Enhancing your environment... ...exceeding your expectations

Crushing

Recycling your waste concrete on your farm/site to give you a valuable end product. No minimum quantity

07767 167821

Covering Halesworth and surrounding areas

Office: 01728 627788

Simon Oliver mobile: 07860 207166 www.crushertrucks.co.uk

DAVID SANSOME & SON

68406

Reed House • Karoo Close • Bexwell Business Park • Downham Market • Norfolk • PE38 9GA

disc spreader MUCKSPREADING with c/w weigh cells

69042

Maize & Grass Silage Combining

Also...

FENCING BALE WRAPPING MOWING TEDDING RAKING BALING

69004

Please ring with any other requirements

Kenilworth Warwickshire

Warwickshire & bordering counties

6 6683

E FARM A SERVICES F

01926 853029

ED FELLOWES 07976 668314

BALING 120 x 130cm 120 x 90cm 120 x 70cm 80 x 80cm BALE WRAPPING

69122

JAMES P DIXON Ltd

Nationwide Bulk Haulage & Machinery Haulage loading services available please call for a quote

01359 258034 07823 555210

Professional hedge cutting service for South Cheshire, Shropshire and Staffordshire NPTC registered inc NPTC Chainsaw Certificate for fallen trees Over 20 years experience of hedge cutting, using the latest professional equipment All green waste is recycled Digger work - free estimates

telephone: 01785 284427 mobile: 07816 771812

www.grahamhedgecutting.co.uk

T M Matthews & Sons CONCRETE CRUSHING & DEMOLITION Any thickness of concrete or reinforcing easily dealt with Willing to buy unwanted concrete 360o diggers, loading shovels, tractors & trailers – for hire with operators Cherry Tree Farm, Tibenham, Norfolk NR16 1PJ

Tel: 01953 861361 Tim: 07860 865435 Harry: 07734 858878

www.timmatthews.co.uk

69015

188 www.farmersguide.co.uk January 2020

188-191 Contractors.indd 188

11/12/2019 16:49

Contractors 68785

G C DIXON AND SON

Established since 1956 - based in Cambridgeshire

www.gcdixonandson.co.uk

Facebook: G C Dixon and Son

AGRICULTRAL CONTRAC TORS Covering all arable operations, including:  Heavy / light cultivations  Mole draining  Drilling  Rape drilling  Spraying  24m Avadex application  Rape swathing  Combining  Mowing / tedding / raking  Baling and chasing  Hedge cutting o  360 digger work Wheat, barley and rape straw wanted in the swath

For more information on our stubble to stubble and full farm contract options, please contact: DAN 07831761157 or NOEL 07702341374 EMAIL: info@gcdixonandson.co.uk

J. C. Contracts

ITION L O M E gs for D n i d l i u ETAL • Farm B f M o P s A e R C p S • All Ty EARANCE

TC • E S O L I S BINS &

RN O C • S E R O GRAIN ST AGE • SITE CL

of Removal

WASTE TYRES Farms, Agricultural Contractors, Plant Hire & Earthmover

25 years’ experience in used tyre disposal Registered Environment Agency Waste carrier/collector National bulk collections in articulated trailers Mixed tyres accepted Forklift and plant tracks accepted Competitive prices • Excellent service

For free estimate and quote contact

Chris Ingram – Intowaste Ltd

07860 670 201 email chris@intowaste.co.uk www.intowaste.co.uk

68791

Email: jrcally@aol.com

Mobile:

T D Sagon Contracting 69052

68790

NT ONCRETE • SALV A D N U D E • R OS REMOVAL • C • ASBEST Office: 01379 855005 We are very flexible and meeting our clients needs is our top priority • Tractor Hire Available • Trailer Hire Available with or without experienced operator • Sugar Beet Harvesting

Operating in and around Suffolk

07532 323796

Please call Tom for a friendly chat on...

07771 706077

T. G. ASKEW Brundish Road, Wilby, Eye, Suffolk IP21 5LR

www.tgaskew.co.uk

Bulk Haulage • Aggregate • Road Planings Stock Feed • Equestrian Rubber Chip & Silica Sand, Bark & Energy Chip • Farm Track Repairs For further information please contact us on Tel: 01379 388156 • Fax: 01379 388109 Email: chris@tgaskew.co.uk 68783

Our AGRICULTURAL CONTRACTORS se

ction is

Make sure farmers can find you – don’t

miss out!

To feature your contracting business in these pages

01473 794444 and ask for Sophie or email sophie.brough@farmersguide.co.uk January 2020 www.farmersguide.co.uk 189

188-191 Contractors.indd 189

10/12/2019 10:30

ton excavator tree shear capable of cutting TREE SHEAR & 14400mm soft wood and 300mm hard wood –

HEAVY DUTY FLAIL

CONTRACTORS

ideal for hedge & tree coppicing

Specialist Agricultural Spraying Contractor

FOR ALL YOUR SPRAYING REQUIREMENTS

Excavator heavy duty ﬂail will mulch anything up to 100mm diameter All general excavator work undertaken

Suspension Fertiliser & Avadex application available now 68479

To discuss the above please contact

Philip Clarke 01728 688360 or 07850 710996

For details please contact us on 07787 511968 or 07766 754800

Edward Crocker

07889 570 210 01832 281 578 www.ecfcfarms.com based near Peterborough

LING

DRIL

s ing wGilDd bird cover ing v a e W • l s il ill zeroants • cover crop gar beet dr e u b s al R to ng from OS conventiovner maize drillit if required n / o e l l game c iliser placem min ti t

lor y a T n Steve9 047288 079387 21035u0k 017 rsfarm.co.

h fer

it both w

L or e

ge ex jht@ro Suffolk/Ess

68796

68180

ewcrocker@aol.com

Bale Wrapping – round or square Grassland Services Arable Services Hay, Straw and Haylage Bought and Sold

07811 125312

South Essex based

PWMay May CONTRACTING

with 360 excavators equipped with forestry mulcher, circular saw & flail head attachments

360º Digger work • Specialising in Ditching & Coppicing (shear & grab) Cuts & holds 14” diameter wood Hedge Cutting

Agricultural & Equestrian Contractors

Tel Mobile

01279 423214 07733 103431

www.pwmaycontracting.co.uk

Spraying (range of machines from 3.5 metres to 24 metres, with guidance on all) Flail mowing (range of machines from 1.8 metres to 4.8 metres) Flail collecting (compact, high tip machine – 1.8 metres) Hedgecutting (2 machines) All aspects of grassland work, including paddocks, grassland and amenity areas Specialist cultivation and seeding works, using compact 1.8 metre wide equipment All aspects of fencing, using low ground pressure machinery GPS soil sampling and nutrient mapping Wide range of machinery from compact tractors on turf tyres, to 200hp tractors

69058

Ditching & Watercoarse Maintenance

new cut, sludging, reprofiling & weed cutting

Soil Screening

Site Clearance & Groundworks CONTRACTING AND PLANT HIRE

access road construction, concreting, drainage & site preparation

Operated Plant Hire

360o excavators 3–22t, D6N dozer c/w pattern blade & laser grade control, site dumpers 3– 10t & Vermeer trencher c/w laser grade control 68910

Agricultural Contractor Contact: Peter 07944 272 762 peterbowers6@gmail.com

Hay and Haylage Making – 80x47cm 'Euro' baler

with a tracked jaw crusher c/w overband magnet, excavating, crushing & stock piling

Vegetation & Hedge Maintenance

P. BOWERS

Agricultural Contractors & Forage Merchants

Concrete Crushing

with 3 way split screen for construction & demolition waste (soil, stone, brick rubble)

69005

69030

Established for 25 years

or e-mail: Plunkettsb@aol.com

68788

Crop Spraying Specialists

experts in your field

EC Farm Contractors

www.greencropforage.co.uk

email barrydayandsons@gmail.com • www.barrydayandsons.co.uk

Contact Will Timmins : 07710 513642/01427 788009 | Email : will@timminscontracting.co.uk | www.timminscontracting.co.uk 190 www.farmersguide.co.uk January 2020

188-191 Contractors.indd 190

10/12/2019 10:30

Contractors

D. E. KEEBLE

Collins Farming & Forestry Services Ltd www.collinsfarmingandforestry.co.uk

Agricultural Contractors

• Hedge and woodland coppicing with excavator and tree shear/grab • Poplar and large tree dismantling with high reach material handler and grapple saw • Timber extraction and purchasing • Hedge cutting • BSL registered supplier of dried and screened virgin woodchip • Wood fuel chipping to G30, G50 and CHP specs

Suppliers of the finest hay & straw: Big Hesston, Mini Hesston & Conventional Bales Baling, Stacking & Delivery Service Straw Spreading for Winter Carrot Cover Muck & Sludge Spreading Hedge Cutting / Flail & Saw

Agricultural Contractor

THE COMPLETE HEDGE CUTTING SERVICE

cu ...a t a cu bove pr t be in ice low qu ” in ality

68789

PJR

Contract Services Ltd

LAND DRAIN JETTING

CONVENTIONAL, HEAVY FLAIL & SAW HEADS MODERN FLEET OF MACHINES ALL WORK UNDERTAKEN

01760 440267 07850 002693

www.mpdennisandsons.co.uk

“A

King’s Row Farm, North Pickenham, Swaffham, Norfolk

Hill Farm, Wissett, Halesworth

www.dekeeble.co.uk

68794

M P Dennis & Sons

■ Full farm contracts ■ 24m spraying & 24m fertiliser spreading ■ Muck, Limex 45 & 70 and lime spreading ■ Set aside topping ■ Combining and all cultivations

Andrew 07860 262196

email: lindakeeble@btconnect.com

69029

07850 988 808 • 01728 660 271

info@collinsfarmingandforestry.co.uk • Valley Farm, Saxmundham, Suffolk IP17 2LR

John H. Howlett

68793

Tel: (Snape) 01728 688688 Mobile: 07889 642096

68782

500m of hose and electronic tracking devices to track blocked/damaged pipes mini digger available for digging out and repairing pipes Norfolk • Cambridgeshire • Lincolnshire

Contact Paul on 07786 913159

OSG Agri Hire Ltd is a family run business based on the Hertfordshire/Essex border providing trailer hire, tractor hire, contract bale chasing and other agricultural services Get in touch with us today to discuss your requirements and discover the advantages of working with OSG Agri Hire Ltd

JPM 18t Dump Trailers

- recently added dump trailers to the ﬂeet – available on short or long term hire

JCB 4220 Fastrac Hire

- JCB Fastracs available with or without an operator - available on short or long term hire

07804 823484 • 01279 815319 • e: ollie@osgagrihire.co.uk • www.osgagrihire.co.uk

t: 01206 230662 m: 07850 888002 e: phil@livertonltd.co.uk

69084

Specialist Machinery Hire Robocut – Mulcher, Forestry, Trencher Muck Spreader Hire Hedgecutting – Flail & Saw Low Loader Transport

PHILIP BAUMBER Agricultural Contractor

Scopwick, Lincolnshire

69126

Our AGRICULTURAL CONTRACTORS section is

For high quality results and prompt service

Sugar Beet Drilling Combi Drilling Muck Spreader Hire New Bunning Mk4 180 24m Spraying Set-aside Topping General Farm Contracting

Make sure farmers can find you – don’t miss out! To feature your contracting business in these pages

69038

www.livertonltd.co.uk

30 Harwich Road • Ardleigh Essex • CO7 7LS

Please contact OSG Agri Hire for more information

01526 322654 and 07976 550635

or email sophie.brough@farmersguide.co.uk January 2020 www.farmersguide.co.uk 191

188-191 Contractors.indd 191

10/12/2019 10:31

Farmers Guide 25 Years Ago A review of the latest tractors and machinery at the recent Smithfield Show was included in the January 1995 Farmers Guide. The 1994 show attendance was higher, but only just, when compared with the previous year. Some standholders felt the attendance should have been higher as there would not be another Smithfield Show until 1996. John Hodge found a number of new tractors at Earls Court. New Holland had one of the new 4wd 700 Series with the latest Super Steer system which gave a tighter turning circle. John Deere had their new 8000 series 4wd models with a full frame chassis at the show and new features for the Massey Ferguson range included oil-cooled multi-plate wet disc clutches and closed centre load sensing hydraulics. Landini took the latest Legend range with Perkins engines and a 36x36 change on the move gearboxes at Earls Court. Steyr showed the latest 900 series droop snoot models with optional front linkage and power take-off and the Irish-built Moffett MFT multi-function tractor was at Smithfield again. Lamborghini launched their Premium tractor range at Earls

Court, features included 85–105hp water-cooled engines, a synchromesh gearbox and lower link hydraulics sensing. On the machinery front, Massey Ferguson took their self-levelling MF 40RS combine to the show, Overum exhibited the new Cross-Pac round bale wrapper and William Cook had adapted their round bale wrapper for big square bales. Kverneland chose Earls Court for the launch of their Plough Pac – a rear-mounted plough and air drill combination with a frontmounted grain hopper. A special feature on fertiliser spreaders noted that Lely had launched their latest mounted Centronic Supabowl twin disc broadcaster and that Overum Tive had unveiled 12m and 18/20m trailed Jet full-width spreaders with stainless steel hoppers. Prices started at £18,200. A new range of Amazone mounted twin-disc broadcasters for the smaller farm were reviewed and the latest KRM broadcaster had an electronic calibrator which ensured the correct application fertiliser irrespective of forward speed. The feature also included five models of Greenland’s Vicon Rotaflow twin disc spreaders with a single lever to control flow onto both discs and for 1995 the company offered a free independent calibration of every machine purchased. Farm Machinery News in the January 1995 Farmers Guide noted that Landquip, the Suffolkbased sprayer manufacturer, was marketing the KRM range of drills and spreaders and Claas had added the Roto Cut system to the Quadrant big

Henry Brown’s Vintage Diary

25/26th January Somerset – Vintage and Classic Tractor Show at the Royal Bath & West Showground, Shepton Mallett BA4 6QN. www.someresttractorshow.com 22/23rd February Worcestershire – Spring Tractor World at the Three Counties Showground, Malvern WR13 6NW. www.tractorworldshows.co.uk

baler. The Riecam RBM 300 sugar beet harvester would have a more powerful Deutz 380 hp engine for the 1995 harvest, Mitchell Rowlands introduced a new Airtec de-mount sprayer for the JCB Fastrac and Kongskilde announced a range of 4–18 row Vibrocrop inter-row cultivators for the sugar beet crop. A record number of more than 90 exhibitors had booked space for the forthcoming Lamma show with free entry and parking on the Lincolnshire Showground. Arranged by the Lincolnshire Agricultural Machinery Manufacturers Association, the first Lamma was held in 1981 to showcase farm equipment made in Lincolnshire and South Humberside. FG

County Tractors County Commercial Cars Ltd, established at Fleet in Hampshire in 1929, started in business by converting lorries to increase their load capacities. Their first tractor, the County CFT crawler, based on the E27N Fordson Major, appeared in 1948 and the County CFT B, which used a New Fordson Major skid unit was launched in 1951. County entered the 4wd market in 1954 with the skid-steered Four Drive,

also based on a New Fordson Major skid unit. Many models of 4wd County tractor were made at Fleet for the next 30 years or so. Most of them were based of Fordson and Ford skid units, but conversions were also made for the International 614 and 634 and for Leyland 485 and 4100 tractors. Most County tractors had equal-sized wheels and, as time passed, they were based on the Ford 5000, many models of

600 and 700 series tractors and the TW ranges. The County FC 1004 Forward Control tractors, based on the Ford 5000 and later the Ford 6600, had a front-mounted cab with full-width rear view mirrors, a rear load-carrying platform and three-point linkage. The rear load platform was sometimes used for a de-mount sprayer or fertiliser broadcaster. County also made FC versions of the Ford 8700 TW 10 and TW 15. Launched in 1979, the County 1184 was typical of the many equal flour wheel drive tractors made at Fleet. The specification included a 120hp six-cylinder diesel engine, 16 forward and four reverse speeds, hydrostatic steering, two-speed power take-off and the safety cab had an escape hatch in the roof. When County Commercial Cars went into liquidation in 1983, the County dealer at Ludlow bought the business. The Benson Group at Knighton in Wales bought County Tractors in 1987 and the last County tractor was made there in 1990. FG A County 1184 with a Dowdeswell Push Pull reversible plough which was popular in the mid- to late 1980s.

192 www.farmersguide.co.uk January 2020

192-270 Henry Brown.indd 192

09/12/2019 22:18

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

Farmers Guide Place your

FREE advert

ONLINE or in the MAGAZINE

farmads.co.uk

Through www. To fax or post, see coupon on page 268

Deadline for inclusion in the February 2020 issue is 23rd January 2019 69251

www.witheridgegarage.com 860771 • Mob: 07970 075031/07860 308214 Nomansland • Tiverton • Devon

Supplying quality tractors and machinery since 1969

NH T6.180 E/C 50kph, Mar 2018 (18), only 2070hrs, full susp, FL, air/exh brakes, 600 tyres, 158/175hp, ext warranty £51,500

New Holland T7.210 P/C S/W 50kph, Jul 2016 (16), 3706hrs, full susp, FL, air/exh brakes, c/w NH 780TL loader ext warranty £50,950

New Holland T6.175 E/S 50kph, 2013 (63), only 1542hrs, full susp, air brakes, FL, 600/480s, cracking tractor £39,750

McCormick MTX135 Dec 2012 (62), only 3672hrs, full susp, good tyres, c/w Trima +5.1, 133hp, 1 owner £34,500

Claas Arion 620CIS 50kph, Mar 2014 (14), 5030hrs, full susp, air brakes, 650/540 tyres, 158hp £30,950

Merlo TF35.7 120 telehandler Oct 2015 (65), only 983hrs, air con, air seat, boom susp, PUH, good tyres, nice handler £42,500

MF 7620 Dyna 6 50kph, May 2014 (14), only 4450hrs, full susp, air brakes, 4 spools, 200/220hp £41,000

Deutz Agrotron 6140 PS 50kph, Jul 2018 (18), only 393hrs, full susp, f/linkage, 600/480’s, 4 spools, 136/143hp £49,250

Ktwo Duo 1400 2019 (unused), sprung drawbar, slurry door, mudguards, steel side extension, 580 tyres, good saving £28,950

Ktwo Roadeo 16t dump trailer 2018 (unused), air brakes, hyd tailgate, BKT 560/60x22.5, cracking trailer & good saving £19,450

JCB JZ141 LC 14t excavator Nov 2018, only 1024hrs, quick hitch & bucket, FSH & warranty until Nov 2020 £57,750

TWB Magic Mole subsoiler 2016, adjustable depth, only done 20 acres

£4,250

Buy and sell online — www.farmads.co.uk

Tel: 01884

A ST RR O 2 IV CK 019 IN U G NI N TS O W

For full details and photos of all the machines above, plus many more see our website www.witheridgegarage.com

New Holland T7.270 Auto Command, 2019, 1341 Hrs, Front Linkage, Full RTK Guidance Package

For more pics and info visit our website

www.cfsukltd.co.uk

01865 880866

Chris: 07808 703325 Adam: 07802 776113 High Quality, Low Houred, Used Agricultural Machines. WARRANTY ON ALL TRACTORS.

email:sales@cfsukltd.co.uk

UK Ltd

£85,500

New Holland T7.210 2019, Range Command, 50KPH, 650 Tyres, Registered Aug 2019, DUE IN

CH O IC E

£62,950

New Holland T6.175 Auto Command, 2019, 1205 Hrs, NH 770TL Loader

£59,500

New Holland T7.190 2018, 1320 Hrs, Range Command 50KPH, NEW TYRES ALL ROUND

£55,500

New Holland T5.120 Electro Command, 2019, 49 Hrs, L.E.D. Work Lights, Heated Seat

£45,500

CFS TRACTOR HIRE, LONG & SHORT TERM HIRE AVAILABLE, PLEASE RING NOW FOR DETAILS ON 01865 880866! MANY OTHER NEW HOLLAND MODELS AVAILABLE – CALL FOR DETAILS January 2020 www.farmads.co.uk 193

fg_class_jan_20.indd 193

12/12/2019 12:47

FORTHCOMING AGRICULTURAL SALES

CAMBRIDGE MACHINERY SALES

COLLECTIVE TIMED ONLINE AUCTION

TIMED ONLINE AUCTION OF ROOT HARVESTING, HANDLING AND IRRIGATION EQUIPMENT

COMMENCES: 7TH JANUARY 2020 9AM CLOSES: 16TH JANUARY 2020 12 MIDDAY Y AD ED RE IGN AL NS O C

Entries Invited â&#x20AC;˘ Generators

â&#x20AC;˘ Telescopic Handlers

â&#x20AC;˘ Balers

â&#x20AC;˘ ATVs

â&#x20AC;˘ Excavators

â&#x20AC;˘ Combine Harvesters

â&#x20AC;˘ Horticultural Machinery

â&#x20AC;˘ Digger Loaders

â&#x20AC;˘ Forage Harvesters

â&#x20AC;˘ Wheels & Tyres

â&#x20AC;˘ Vehicles

â&#x20AC;˘ Livestock Requisites

â&#x20AC;˘ Spares

â&#x20AC;˘ Cultivators

â&#x20AC;˘ Trailers

â&#x20AC;˘ Root Growing

â&#x20AC;˘ Ploughs

â&#x20AC;˘ Small Plant & Tools

â&#x20AC;˘ Attachments

Y AD ED RE IGN AL NS O C

â&#x20AC;˘ Hay Making Machinery

Y AD ED RE IGN AL NS O C

â&#x20AC;˘ Tractors

Consigning Now

MONDAY 13TH JANUARY 2020 For further information and entry forms, please contact our auction team.

For further information, please contact: David Wilson on 07768 159978 or david.wilson@cheffins.co.uk

Property | Land | Fine Art | Farm Machinery

01353 777767

SALES AND VALUATIONS UNDERTAKEN NATIONWIDE

AIR CONDITIONING

ATVs/UTVs

PAPWORTH

TOMLINSON

Kubota RTV X900

01284 771344

VEHICLE AIR CONDITIONING

www.mkmagri.com

The ATV & UTV Specialists

01234 768889

www.mkmagri.com

The ATV & UTV Specialists

03-69071

cheffins.co.uk

GROUNDCARE

Gator Main Dealer

SALESSERVICESPARES

We stock:

2016 John Deere 2032R compact tractor c/w loader & 62â&#x20AC;? mower deck, industrial tyres, road registered 1150hrs .....ÂŁ14,000+VAT

01743 464100 Richard Evans 07375 508366 richard@battlefieldmachinery.com

battlefieldmachinery.com

KAWASAKI Mule DTX, 2016, 650hrs, full cab with doors, double bench seats, road reg, V5. ÂŁ9,950. L Rich Tel 07774 112211 (Glos)

03-69079

charliepapworth@gmail.com

Tel: 01954 267215

ÂŁ6,750

03-69201

01-66300

R134A .................................. POA Air conditioning service equipment â&#x20AC;˘leak detectors â&#x20AC;˘vac pumps â&#x20AC;˘recovery machines AIR CONDITIONING PARTS FOR ALL FARM & CONSTRUCTION VEHICLES AT DISCOUNT PRICES We accept all major credit cards

03-69080

Trade advertising â&#x20AC;&#x201D; Tel: 01473 694455 Email: classified@farmersguide.co.uk

THE SALEGROUND, SUTTON, ELY, CAMBS, CB6 2QT

01449 736060 Buxhall, Stowmarket, Suffolk IP14 3DL

www.tomlinsongroundcare.co.uk

ATV Spares Specialists SALES SPARES TYRES SERVICE All parts available by mail order ORDER ONLINE TODAY!

2018 John Deere TH 6x4 Gator 6 wheel, 4wd, tip kit, turf tyres, ex demo, 160hrs .....ÂŁ12,000+VAT

BALERS & BALE HANDLING SPARES & SERVICE

Manor Farm â&#x20AC;˘ Ixworth Thorpe Bury St Edmunds â&#x20AC;˘ Suffolk â&#x20AC;˘ IP31 1QH

SPARES & SERVICE

Sun Valley Works â&#x20AC;˘ Wood End Marston Moretaine â&#x20AC;˘ Bedford â&#x20AC;˘ MK43 0NJ

ur For all yoIED TRADE CLASSIFISING contact... WATERS ADVERT or NICKI ersguide.co.uk

01271 320727

69146

ki@farm

Foxhunters Garage, West Down, Ilfracombe, N Devon EX34 8NU

www.thequadcentre.com â&#x20AC;˘ info@thequadcentre.com

ILSONersguide.co.uk nic 73 694456 SAM W 014 @farm a h samant 5 5 4 4 uide 01473 69 rmers G Fa

o.uk

rmads.c

www.fa

QUICKE ďŹ&#x201A;exible round bale handler. D Seymour Tel 07850 292743 (Bucks)

194 www.farmads.co.uk January 2020

fg_class_jan_20.indd 194

12/12/2019 16:08

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

G & J Peck Ltd 68827

S – 41026048 – New Holland T6.145 EC 16x16 Electro Command transmission, 40kph, engine speed management, 540/540e/1000, 18.4x38 & 14.9x28 tyres .............................. POA

S – 21025672 – NEW New Holland 40hp with cab, 3 range hydrostatic transmission, swinging drawbar for slider hook, rear 3 point linkage with ﬂexible ball ends ...................£17,495

W – 41023849 – Amazone Cirrus 6m disc drill ex demo, grain only, Twin Tech+, Cat 3, serrated disc, elec half side shut off, tyre scrapers, roller scrapers...........................................£58,950

S – 41025673 – NEW New Holland Boomer 50hp 6x16 synchro shuttle transmission, swinging drawbar for slider hook, rear 3 point linkage ﬂexible ball ends .......................................£17,995

S – 41025663 – NEW New Holland Boomer 40 compact tractor, 40hp, 3 range hydrostatic trans, swinging drawbar for slider hook, rear 3 point links............................................................£17,495

S – 21026749 – 2014 New Holland T7.260 PC SW FPT 6.7L, Tier 4a diesel engine (max 240– 260epm), Power Command 19x6 transmission ...................................................................£54,985

W – 41023850 – ex demo Amazone Cayros XMS 5-950 plough, 5 furrow, WXL 430 bodies, Cat 3 with balls, manure skimmers, transport wheel, hyd furrow, 500mm rear disc...........................£10,950

S – 41026506 – used Standen bed tiller 2 row, c/w ridging bodies .......................... £5,950

S – 41026400 – 2008 Standen planter BB2 2 row cup planter c/w AVR ridging hood .. £6,200

S – 41026806 – 2013 AVG Ge-Force 5.4m hyd folding cultivator with 7 seasons work .........................................................£19,850

W – 11024941 – ex demo Amazone Cayron plough, 200V-100 (290hp), 5+1, S35 boards, rear disc, skimmers, Cat 3 bar, combi wheel, hyd vari width..........................................................£22,900

J – 21025472 – Larrington 20t Majestic sprung drawbar with four hold adjustment, with bolt on swivel 40mm towing eye, hydraulic brakes ..................................................................£31,818

S – 21026824 – 2016 New Holland CR9.90 24" Terraglide tracks, 14,500L grain tank, DFR, Optispread, chaff spreader, Intellisteer GPS with mapping ........................................................ POA

S – 2019 New Holland CR8.90 combine 24” Ultraﬂex tracks, DFR, full Intellisteer with mapping, 30’ varifeed & trolley, straw chopper ...................................................................... POA

S – 41023199 – Rabe Albatros 140 ex demo unit, in furrow, rated up to 300hp, 5+1 build, 93cm point to point, under beam clearance 80cm .........................................................£15,950

S – 21024576 – Stocks Fan Jet Stocks slug pelleter, 24m, variable rate, mounting brakcet to utility vehicle, control box........ £1,050

A – 11025266 – Logic MFP120B 1.2m 16hp Briggs engine, rear wheel electric start, grass blades ...................................... £4,500

S – 2016 New Holland CR9.90 combine 28.5” Terraglide tracks, auto greaser, 35’ varifeed header, DFR, full Intellisteer & mapping, yield & moisture monitors ........................................ POA

W – 41026626 – Amazone Centaya 3000 ex demo, Super Iso c/w Twin Tech double disc coulters at 15cm spacing, Amatron 4, Iso cabling, Twin Tech harrow tine................................. POA

A – 11025744 – Honda Pioneer 700 SXS fuel-injected 675cc OHV single-cylinder engine, independent front & rear suspension ..................................................................£10,250

J – 51025205 – JCB 515-40 Starco std wheel & tyre assy, Tl 255/75-15.3 119/107a8, manual joystick, 1 lever, 1 aux, cab, 3 wipers, fabric susp seat, ﬂoating fork frame £24,000

J – 41026406 – Agri Traction 460/70R24 Michelin XMCL, servo 1 lever 1 aux, cab tinted glass, inc heater, deluxe seat, Q-ﬁt carriage 1226mm wide, worklights front & rear ..............................£36,950

W – 41026627 – Amazone Catros+ 3003 ex demo, 2019 Catros+ 3003 Special, compact disc harrow with 2 rows of concave serrated rimmed ......................................................... POA

J – 41025843 – new Teagle TAP/S 250 right hand cut, outboard gearbox, 2m cut, fully hydraulic offset head adjustment, wide angle PTO, auto belt ........................................... £9,565

S – 21026581 – 2015 Teagle TAP/S ﬂail mower 250 left hand cut, ideal for roadside verges, 80–200hp (540 rpm), wide angle PTO, outboard heavy duty gearbox ................................... £4,595

J – 21024064 – Major 5.2m shallow disc injector, 3 point linkage mounted, plus umbilical ﬁtting ................................... £6,950

J – 21026176 – 3000 gallon tanker air brakes, PTO pump ............................... £6,500

Buy and sell online — www.farmads.co.uk

S – 41024577 – ex demo New Holland T6.175 DCT, 50kph, Terraglide axle, Dynamic Command gearbox, rear/auto PTO, AGR ready, hyd pump, 520/85R38 & 16.9x28 tyres, 319hrs ...............POA

VISIT OUR WEBSITE WWW.PECK.CO.UK FOR MORE INFORMATION PLEASE CONTACT • S - STEWART BARNETT ON 07818 030552 • A – ANDREW BAILEY ON 07771 534603 • J – JON WAREING 07818 030561 • W -WAYNE COTTAM 07795 600043

SPALDING – TEL 01775 724343 ELY (HEAD OFFICE) – TEL 01353 664515 RAMSEY St MARY’S – TEL 01733 844642 January 2020 www.farmads.co.uk 195

fg_class_jan_20.indd 195

12/12/2019 10:11

Trade advertising â&#x20AC;&#x201D; Tel: 01473 694455 Email: classified@farmersguide.co.uk 196 www.farmads.co.uk January 2020

fg_class_jan_20.indd 196

12/12/2019 10:23

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

Buy and sell online — www.farmads.co.uk January 2020 www.farmads.co.uk 197

fg_class_jan_20.indd 197

12/12/2019 10:32

2017 Hamm HD 10c VV twin vibrating drum roller, 709hrs, roll bar, seat belt, beacon, water, Kubota engine £9,750

2015 Ingersoll Rand 7/41 140cfm 2 tool compressor, 553hrs, Vanmar engine, lights £4,000

Agricultural building roof sheeting & cladding, new roofs re-roofs & repairs, guttering supply and fix or fix only COVERING EAST ANGLIAN AREA VICON/KLEINE/GARFORD sugar beet drill aluminium cell wheels, 5 holes, part number 0553, new. £50 each. GW Harrold & Partners Tel 01485 518244 (Norfolk)

2004 Merlo P33.7 Turbo Farmer, 7m reach, 3.3t lift, 6577hrs, 110hp, pick up hitch, hyd locking pins, joystick control, new tyres all round POA

2010 Bomag BW 100 ADM-2 twin vibrating drum roller, 517hrs, folding roll bar, seat belt, beacon, water, Kubota engine £7,000

2012 Ingersoll Rand 7/41 140cfm 2 tool compressor, 1021hrs, Vanmar engine, lights £3,750

bc incab controls, 2013 (serial no. 1729.92.03), bale count 22,250 genuine, camless pick-up 2.25m, 13 chopper knives/drop floor, roller bearings 50mm greaseable, automatic chain lube, floatation Nick tyres, serviced/ready for work, season warranty (yes fantastic condition), stored inside

CROSS Engineering "Hippo" beet washer, 20tph rotating barrel system with elevator, tractor PTO powered (65hp), very good condition, oiled & stored undercover, loads of useful mods. £15,000 ono. P Gwyther Tel 07855 974020/01437 721265 (Pembrokeshire) 06-68844

£14,750

less than half price of new!!

Chris Wiseman

07917 509070 01603 464710 G, & forPhone a free FIN ING N brochur e O O D O R AD ATI y tor c L a C SUL IAL ime/F IN ATER /Non Pbrle files ents M l Prime availated Proequirem r ul ds ga • F econ orru own s x/C our o to y B • ut •C

PETER WRAGGE SUPPLIES

05-69121

2012 Bobcat T35100SL telehandler, 3648hrs, 10m reach, 3.5t lift, jack legs, sway control, 100hp turbo, j/stick control, 4ws/crab steer, 75% tyres all round £18,000

Welger RP245 Baler

GLEDHILL ACCESSORIES

Tel: (01449) 737192 Fax: (01449) 736666

01354 694701 07802 850212

www.peterwraggesupplies.co.uk

gledhillaccessories@gmail.com

Concrete Mixer

www.gledhillaccessories.co.uk

JOHN Deere 590 round baler, twine only, good belts, barn stored & used this season. £2,750. J Ramsey Tel 01653 628366 (N Yorks)

2008 Vervaet 617 Beet Eater 45/50 lift unit with depth wheels 5800 eng hrs only, 3400ha

Krone BP1290HS

08-64896

Square Baler (ex demo)

2017 ROPA Panther 2a 45/50 excellent condition, RR with auto depth control

Please see website for more stock

www.richardbetts4x4.co.uk

POA

69112

Contact Ian 07802 226917

05-69395

twin axle, rear steering, air backs, active pick up, weighing tailgate, electric bale length, knotter cleaner, auto lube, double knotter, LED lights/worklights, additional twine boxes, CCI 1200 terminal, rear camera, roughly 3000 bales, excellent condition

www.wilfredscruton.co.uk JOHN Deere 590 round baler, wide pickup, twine only, good belts, used this season on small farm, working order. £2,750. J Ramsey Tel 01653 628366 (N Yorks)

2009 John Deere 582 premium round baler Kverneland 4m

power harrow, c/w packer roller & trailer..................................£3,250

from £2,800 + VAT & Del ¾ - 1.1m3 capacity, high grade steel gearbox, 3 years warranty

01386 49155

For all harvester details Contact: Simon Peacock Mob: 07717 416178 or Email: simonp@ctmrcs.co.uk

OAK beam, 16'. £300. G Meadows Tel 07951 111182/01728 660577 (Suffolk)

2019 CTM9053XL top spec high volume cleaning & spiral roller system extraction of mud & trash, powered wheels & multi-function radio control

For all cleaner/loader details Contact: Nigel Mountain Mob: 07785 972510 or Email: nigelm@ctmrcs.co.uk

BUILDINGS & MATERIALS

Case IH AFS Accuguide

guidance system, Nav Controller 2, RTK radio & aerial, 262 receiver, AFS Pro 600 screen ............. £3,500

08-68939

Trailer Engineering 950L bunded diesel bowser, fast tow, lights, manual pump £800

ROOFING MATERIALS METAL SHEETS

24ft x 9ft toilet block 5 toilets, 5 sinks, 4 urinals, 2 heaters £2,500

galvanised and PVC coated steel corrugated or box profile first and second quality Non asbestos Big Six and Std 3in sheets, fittings and accessories

01622 832666 07939 114023

Hardy Roofing Supplies www.hardyroofing.co.uk

£9,950 c/w roto feed & cover edge net wrapping, 34,000 bales, gd condition

MF 7475 Dyna VT

tractor, 05 reg, 6900hrs, 50kph, front linkage..................... £22,000

www.tvmachinery.com Tel Mike 07764 835562(T)

AS Marston

rota spreader, 7cu/yd, hyd lid....................................... £950

07973 657609

05-69372

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Tel: 01522 246 522 James Richard 07764 511257 07860 575155

M&C CLADDING

08-66191

BEET EQUIPMENT

BALERS & BALE HANDLING (cont)

08-68990

68781

All prices + VAT

Worcester

ION

MENT PLEASE

UIDE ERS G ING FARM LY P S HEN RE W NT RTISEME TO ADVE

GRASS grid blocks, heavy duty, interlocking, designed for heavy trafﬁc, a couple of pallets full available, never been used. GW Harrold & Partners Tel 07836 751076 (Norfolk)

CRASH barriers, selection of sizes, packs of 10 W section 3.4m @ £16 each; 4.3m @ £20 each; 5.3m @ £30 each; box section @ 4.8m long packs of 10 @ £32 each; all+VAT. Please call Chris. C Wisson Tel 07776 184394/01480 830224 (Cambs)

198 www.farmads.co.uk January 2020

fg_class_jan_20.indd 198

13/12/2019 10:15

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268 Email julian@midlandsagriplant.com Office 01530

Mobile 07831

229686 113316

Finance & Part Ex Available

Selected

Cenius 3003 Super – 2016

ex. demo, 3 m, stone release, hyd. depth control, levelling discs, side discs, 80 mm inversion shares.

£49,950 UX 3200 Super – 2017

ex. demo, axle steering, 24 m, Profi-fold I, DistanceControl plus, AmaSwitch nozzle shut-off, LED lights, wash down kit.

£36,950 ZG-TS 8200 - 2017

used, TS3, vanes, AutoTS, ArgusTwin, hyd. hopper cover, weighing system, choice of wheels.

£61,950 Cirrus 6003-2 - 2017

ex. demo, 6 m, ISOBUS, TwinTeC+ coulters, front discs, Crushboard, TwinTerminal, LED work lights, ½ side shut-off.

£16,950

Kverneland 4m Drill Combination 2014, Suffolk coulters, 800 acres from new

Agri-Weld Grassland Subsoiler 2019, 3m, 5 leg, demo condition

Bunded Diesel/AdBlue Bowsers 1000 to 9000 litres choice of 8

Twin Axle Dump Trailers 8 to 14t choice of 4 units

Front Linkage Weight Blocks 900 to 2500kg choice of 7 units

Lemken Zirkon 10/Solitair 9 6m Folding Drill Combination 2010, excellent condition

Krone Big M Self Propelled Mower 2015, 2790/2015hrs

Richard Western SWT 18 & 20t Silage Trailers 2017, Nokian 650/55x26.5 flotation tyres, demo cond

MF 8735 Efficient Tractor 66 reg, 780hrs, Dyna-VT, 5yr warranty part-ex

Complete Spreadwise Umbilical Slurry System 1400m hose, can include trailer & compressor

TWB Subsoilers mounted & trailed choice of 4 machines new metal

JCB 435S AGRI Loading Shovel 2015, 1850hrs, 750/65x26 tyres 75%, excellent

Folding 14’ Silage Forks 2011 to 2019 choice of 7 units

Horsch Maestro SW 12 Row Maize Drill 2014, 75cm rows mint condition

Krone Big X 1100 Foragers 2013 & 2010, low hrs, maize headers part-ex

Bunded Fuel Cubes with pumps 2012 to 2019 choice of 8 units

Dowdeswell DP 145 Plough 2013, 8 furrow, DDS bodies, new mouldboards Cat 3/4 headstock

Single & Twin Axle Slurry Tankers 1700 to 4000 gallon 2011 to 2016

Krone 1400 Plus 4 Rotor Rowing Up Rake 2014, 620/40x22.5 tyres excellent condition £24,500

Cayros XMS 1050 V 5f – 2017

ex. demo, vari-width, slatted mouldboards, skimmers, trash boards, swivel frame, press arm, combi wheel.

£48,400 Cenius 6003-2TX - 2018

ex. demo, 6 m, DW disc roller, levelling discs, C-Mix Super tines, braked axle, Cross shaft CAT III.

The next best thing to a NEW Amazone - a USED one

WANTED

High Quality Combines, Self Propelled Forage Harvesters, Ag Loading Shovels, Machinery & Plant

See website for more pictures & more stock

69182

£11,000

www.amazone.co.uk

Simba 4.6m Cultipress 2012, Pro-active tines mint condition

Buy and sell online — www.farmads.co.uk

01302 751200

Black Stocks Dual Wheels 710/75x42, 710/70x38 650/65x38

www.midlandsagriplant.com January 2020 www.farmads.co.uk 199

fg_class_jan_20.indd 199

12/12/2019 15:16

£79pw 16m - steel platform with ramps - £16,000 + VAT £89pw 18m - steel platform with ramps - £18,000 + VAT Price includes new indicator/printing system, delivery, installation and legal certification for trade use.

DESIGN

Bespoke Buildings

CONSTRUCTION

69054

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Mettron Weighbridges AGRICULTURAL BUILDINGS Beware of Imitations

68499

Manufacture and Installation

SUPPLY

Specialists in design, manufacture & construction of a range of agricultural, industrial & equestrian steel frame buildings

Full Groundworks Undertaken Grain Stores/Crop Storage General Purpose Buildings Livestock/Cattle Sheds Straw Barns Chicken Sheds Potato Stores Onion Stores ...and more Please contact us to discuss your requirements

Call 01782 816730 or email mettronweighing@aol.com to discuss options and to arrange your site visit

K & J CONSTRUCTION LTD

Mettron Weighing

Old Oaks Farm, Tendring Road, Little Bentley, Colchester CO7 8SH

01206 430350 • info@kandjconstructionltd.co.uk

kandjconstructionltd.co.uk

Contact Will

Goff 07799 111030

william_goff@hotmail.com

2019 Demo NH CR8.90 28.5” Terraglide tracks, Intellisence, Intellisteer guidance, 30” varifeed, 2 knives, engine hrs 83, threshing hrs 49, 0% finance & warranty

2012 New Holland CX6090 6 straw walker, Smart Sieve, yield monitor, chopper & chaff spreader, 800/65R32 & 460/70R24, 20’ varifeed header c/w 1 side knife header trailer, engine hrs 1,246 & threshing hrs 955

2015 NH CR9080 Elevation 24” tracks, chopper & chaff spreader, Smart Steer, 30’ varifeed with trolley & side knives, engine hrs 1,259 & threshing hrs 1,042

2011 Cousins V-Form 4.5m 7 leg very good condition

£10,000 2013 NH T6.175 16x16, full suspension, 14.9R28 & 18.4R38, 4 spools, hrs 2,950

Kverneland 3m drill combination NGH 30 power harrow & packer, Accord iDrill Pro, Suffolk coulters

2019 New Holland TC5.70 (5 walker) Hydro, rotary separator, Smart sieve, straw chopper, 15” header & trailer, engine 124hrs, threshing 88hrs

2013 New Holland T6.140 Electro Command, 4 spools, hrs 2,950, 420/70R28 & 520/70R38 Michelin

very good condition for age, recent new rings and centre section

£3,000

POA

Demo 2018 NH T7.315 Auto Command, 50kph, Intellisteer, 650/60R34 & 710/75R42 Michelin, Blue Power, weight block not included, hrs 250

2007 Amazone 303 power harrow/drill combination very good condition

New Maschio DMR 3m power harrow c/w packer roller

69203

68829

Contact Charles Moorman Office 01777 870111 www.plattsharris.co.uk or email us at: sales@plattsharris.co.uk

07970 805351

Cousins 6m folding rolls 1999 Vaderstad Rexius good working order Twin 1050

£6,500

2012 Kongskilde Wingjet 24m

very good condition 2 sets of wheels

£15,000

2009 Spaldings Flatlift 3 leg plus grass discs

£4,000

01362 667148

Foxburrow Farm, Dereham Rd, North Elmham, Dereham, Norfolk NR20 5JG

200 www.farmads.co.uk January 2020

fg_class_jan_20.indd 200

12/12/2019 12:57

All prices subject to VAT

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

NM Case IH 600 ’12, 5800hrs, PowerShift 40k, ATC, Autoguide ready £113,500

C N 50% off RRP

JD 6155R ’16, 5450hrs, JD 6150R ’14, 4458hrs, AutoPowr 50k, TLS+, 4-SCV’s, DriveDirect 40k, touch screen AutoTrac £64,000 display, TLS, fridge £49,950

CE JD S790iT ’19, 840hrs, ProDrive 38k, A/C, SF6000, 640X header £298,500

EC Claas Lexion 600 TT ’10, 2600hrs, hydro 30k,1200 Vario header £96,000

C A

N A

JD 840i ’15, 3900hrs, 36m, 12 sections, SF3000, boom suspension £39,500

JD R962i ’16, 6200l, PowrSpray, 36/24m boom, auto section control £62,500

B N

Terex 6 Ton Swivel Dumper Niftylift 170HDET ’18, 77hrs, trailer mounted, 17m, traction ’07, 2371hrs £10,750 drive dual power £27,000

A JD 6150R ’12, 5632hrs, AutoPowr 50k, AutoTrac ready, TLS, PUH £53,000

MF 7624 DYNA VT ’15, 5661hrs, 50k, 4x SCV’s, RTK, A/C, tyres 50% £55,000

NM JD 6110RC ’15, 4815hrs, AutoQuad + 40k, TLS, F/H, 3 SCV’s £38,500

JD 9780CTS ’04, 2160hrs, chopper, chaff spreader, 625R header £58,000

MF 7280 ’12, 965hrs, 8 straw walker, chopper, 25ft PF header £67,000

NM N E

GMR GM-R3200T ’08, 3000l, 24m, 12/20/24 boom, road lighting £14,950

NM Hitachi Zaxis 130 LCN-5 ’14, 7489hrs, steel tracks, elec fuel pump £39,000

Manitou MLT 735 T 120 LSU ’14, 3441hrs, elite spec, PowerShift 40k, PUH £39,500

B G. T. Bunning High Lift Trailer 10 Ton, road lights £3,500

JD 8370R ’17, 1034hrs, AutoPowr 50k, ILS brakes, 5 Prem SCV’s £157,500

C Challenger MT765C 8244hrs, Powershift 40k, 4x SCV’s, 30” tracks – 85% £60,000

JD 7280R ’12, 2483hrs, AutoPowr 50K, TLS, 5 SCV’s, air brakes £77,500

JD 7530 ’08, 4885hrs, AutoQuad 40k, TLS, HCS, hyd trailer brakes, 3 SCV’s £39,500

JD 6175R ’17, 1371hrs, AutoQuad 50k, TLS, 3x ESCV’s, hyd braking £91,000

EC JD 550 Baler 1992, wide pick up, twine & net, wrap bale ramps £4,000

Bergmann TSW5210 ’15, sprung drawbar, weighcell, slurry doors, ISOBUS £25,000

A B Grimme GT170S ’12, double multisep, hyd axle drive, VC50 control box £65,000

Grimme GZ1700DLS ’01, table wheel drive, new style gt cart elevator web £10,750

NM NM

Buy and sell online — www.farmads.co.uk

C B JD 8360RT ’13, 5063hrs, AutoPowr 40k, deluxe cab, 7” touch display £89,000

E Challenger MT775E ’16, 3394hrs, PowerShift 16F 4R, NEW 30” tracks £126,500

NMA

Manitou MLT 737 PS130 ’17, 2500hrs, PowerShift 40k , A/C, hyd PUH £51,000

Claas 7035 Scorpion ’14, 3790hrs, VariPower 40k, A/C, PUH, £40,500

Kuhn MM153 6ET Plough ’19, Kuhn HR4004D Power Harrow multi master, LP66D bodies ’18, rigid, duplex gear box, 4m maxipacker roller £13,970 £18,695

Over 800 used items at www.benburgess.co.uk | Please contact your local depot on: (A) AYLSHAM 01263 734311 | (B) BEESTON 01328 701347 | (C) COATES 01733 840777 (E) ELLINGTON 01480 890990 | (NM) NEWMARKET 01638 577877 | (N) NORWICH 01603 628251 or contact Charlie Oldfield on 07825 932 221 January 2020 www.farmads.co.uk 201

fg_class_jan_20.indd 201

12/12/2019 10:39

c/w 35’ header, GPS Intellisteer, Intellicruise, 1531 drum hrs very tidy combine

2007 Bateman RB26

3000L tank, 24/27m VG boom, Ag Leader GPS, Norac, 710/320 wheels, 7500hrs, superb

2000L tank, 12, 20, 24m boom, Househam controller/GPS s/off,2 sets of wheels, 6000hrs, very tidy

3000L, 12/24/28m boom, 175hp, LH Agro 5000, 2 sets of wheels, very good

2004 Kellands Agribuggy 2000

2000Ll tank, 24m, 2.5TDi engine, 4 speed ZF gearbox, RDS Rate controller, 2 sets of wheels, 4500hrs

£12,950

2001 Househam Sprint 2000

2004 Bateman RB25

£21,950

£19,950

3000L tank, 12/24m boom,125hp, LH Agro 5000, p/purge, 2 sets of wheels, 9950hrs very good condition

5000L, 36-40m VG boom, 50kph, 275hp, pacer, Topcon X35 GPS, Norac, 4900hrs very tidy

£25,950

3000L tank, 30m VG boom, LH Agro 5000, 600x28/380x30 wheels, 7956hrs very good condition

2015 Bateman RB55

£46,500

2008 Bateman RB26

£19,950

1999 Bateman RB16

8m drill, blockage sensors, ½ width, rear filling auger.7000 ha, good, tidy drill

POA

4000L tank, 32m boom, AG Leader GPS shut off, 2 sets of wheels, good condition

2011 Horsch Pronto 8DC

POA

Varipower, hitch, p/ tines,bucket and bale spike, 3200 hrs very tidy condition

Autoquad, TLS, 50kph, air, 4 wheel braking, 7500 hrs tidy tractor

POA

2010 Claas Scorpion 6030CP

£43,950

2009 Bateman RB35

2011 John Deere 6930P

Powerquad, 40kph, 650x38 rears, 540x28 fronts, 4700hrs, front weight tidy tractor

£25,950

6 speed, 40kph, SRS, hitch , 460x24” wheels, Q fi,t, only 2900hrs tidy

2012 John Deere 6150R

25” tracks (70%), 4 spools, Trimble GPS auto steer, 4800hrs exceptional

£31,950

2011 JCB 536-70

Autopowr, 50kph, air braking, TLS, 4 ESV, f/ links/PTO, 710/600 tyres superb

£36,750

2004 Challenger MT755

2012 John Deere 7280R

4 spools, linkage, PTO, 5600hrs exceptional

£37,950

AP, 50kph, f/links, 4 ESV, air, GreenStar GPS, 710/ 600 tyres, only 2500hrs superb condition

2011 Challenger MT765C

POA

2016 John Deere 6215R

£62,950

c/w 30” tracks, link/PTO, 5 spools, AFS GPS auto steer, 3000hrs in super, genuine condition

25’ header, premium chopper, Zurn extension, 2074hrs in very good condition

POA

2010 Case Quadtrac STX535

auto level, 25’ Powerflow header, chopper, chaff, 2031hrs good, tidy combine

2005 John Deere 9780 CTS Hillmaster

c/w 20’ HC header, chopper/chaff, 2059 drum/2600 eng hrs in good condition

POA

£29,750

2004 MF 7274 AL Cerea

2004 New Holland CX820

POA

2012 New Holland CR9090 Smart Trax

c/w 35’ header, 40kph, chop/chaff, trolley, Cemos, Cat C13 ,1114 drum hrs very tidy

07764 835562

POA

2013 Claas Lexion 760TT

£117,500

£128,000

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Thames Valley Machinery

Abingdon • Oxon

1998 Househam Knight Sprint

c/w 2500L tank, 24m boom,RDS Delta rate controller, 2 sets of wheels, 6200hrs very good

ONE OF THE UK’s PREMIER FARM MACHINERY REGISTERS Please contact Mike for more information on these and many other machines

www.tvmachinery.com

69218

202 www.farmads.co.uk January 2020

fg_class_jan_20.indd 202

12/12/2019 10:42

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268 OLD New Holland combine lifters, barely used, some worn more than others, but still in good condition, some not used before (36). GW Harrold & Partners Tel 01485 518244 (Norfolk)

BUILDINGS & MATERIALS (cont)

08-69352

FOR SALE CONCRETE PANELS 4090mm long x 1000mm high x 150mm thick

£160 each plus VAT not including delivery

01604 770418 office@fwtburrows.co.uk

www.fwtburrows.co.uk

FWT Burrows & Co Ltd, Althorp, Northants NN7 4HH 08-64086

02476 659 767

KIT BUILDINGS

All sizes available – made to order

www.kitbuildings.co.uk COMBINES & HARVESTERS

NEW Holland TX 68 Plus, 2002, 24', RDS yield meter, 3100 engine/2700 drum hrs, 2007 Biso rape extension, very nice condition. POA. A Straw Tel 07952 475676 (Lincs) PAIR of Claas TM 6 adjustable frogmouth sieves, to ﬁt 570/750, 5 straw walker combines, 174cm x 63cm; also set of used claas bean concaves to ﬁt 580(+) or 560/760, 6 straw walker combines, can also be used to improve throughput. GW Harrold & Partners Tel 07836 751076 (Norfolk)

All prices + VAT

68821

t: 01243 575333 • m: Joe 07540 013587 e: mail@ hjknight.co.uk • www.hjknight.co.uk

£3,200

198/60

2019 NH CX8.70

25’V

NEW

2011 NH CR9090

35’V 2311/1719

2011 NH CR9090

35’V 2494/1734

2012 NH CR9080

30’V 2303/1849

2010 NH CR9080

30’V 2483/1995

2005 NH CR980

30’XHC 2669/2175

2004 NH CR980

30’XHC 2670/2175

2012 NH CX8080

30’V 1450/1150

2006 NH CX880

30’V 2861/2350

1997 NH TX66

20’

2019 Lex 780TT

V1280

01493 750999

NEW Holland TF42 SL, 20', trolley, Fiat engine, 3808hrs, manual, air con, 1985 C reg, superb condition, barn stored, ready for work. £4,950+VAT. R Maundrell Tel 07785 568800/01527 854834 (Warks)

11-69370

40’V

CROP PROTECTION

3700/3200 180/30 1984/1526 1130/949

Approximate hours pre-harvest some machines will be hired for 2019 Harvest

01733 841932

STOCKS slug pelleter, new switch box, includes handbook, shutter sometimes stays open. Offers. M Gardner Tel 07772 170938 after 7pm (Suffolk)

10-68929

2011 MF 9280 Delta 30’PF

2011 Ingersoll Rand/ Doosan

www.jmurrell.co.uk

2019 NH 10.90

25’

COMPRESSORS

7/31E portable road compressor/generator, 1519hrs, tidy

COMBINES FOR SALE

2013 CX8070

JOHN Deere 2264 Hillmaster, 2002, 2173hrs, 820 header with trolley, 6 walker, chopper, chaff spreader, RDS yield/moisture meter, satellite mapping, rear camera, always stored undercover, owner driver in excellent condition. £38,000+VAT. M Burrough Tel 07860 246156 (Somerset)

New Holland 6635 c/w loader 12x12 box ............................................£9,950 Bomford B49 hedgecutter cable control ..............................................£4,250 Twose 520 hedger cable control ...............................................................POA Three weigh celled Amazone spreaders .................................... from £2,995 Ken Wootton 14t grain trailer 1997 immaculate ..................................£5,995 Ford Transit 2008 100k miles LWB high top .........................................£2,995 Kuhn 4m p/harrow & Accord drill c/w AS Marston low loader trailer, would split ................................................................................................£6,750 Vaderstad Rapid A400S 4m drill 2007 new genuine discs.............. £15,950 John Deere 6110 SE 2wd air con off race course.................................due in Menke 3m ﬂail topper front & rear gwo................................................£1,995 Claas Volto 770 6 rotor tedder ready to work ......................................£3,750 Kuhn 8702 8 rota tedder 2013 ...............................................................£5,995 Lemken Karat 9 2016 ex demo ..............................................................£7,250 Gull 2000L twin axle fuel bowser ...........................................................£1,450 Claas Quantum 5800P forage wagon 2011 ...................................... £28,500 Various tedders, mowers & rakes in stock .............................................. CALL Browns 4.5m folding slitter vgc..............................................................£3,250 Dowdeswell MA140 6 furrow plough choice of 2 ..................... £4,250 each Dowdeswell Delta 100S 5 furrow plough .............................cheap @ £1,995 Malone 6’ pasture toppers new in stock & ready to go ............ £1,175 each New pallet carriages ..........................................................................from £450 New LWC buckets & grabs in stock British built .................................... CALL Major 8400 ﬁnishing roller mower, 2002 ..............................................£2,750 New Malone tedders in stock, 5.7m ......................................................£6,250 New Malone post bangers, side & t/l tilt...............................................£2,600 Ken Wootton 14t trailer only seen grain ...............................................£6,450

www.aphltd.co.uk

HIRESALESSERVICEPARTS

CLAAS Lexion 750-780 off-side panels, new type aluminium, slightly damaged. Best offers GW Harrold & Partners Tel 01485 518244 (Norfolk)

SWATHERS & DRAPER PICK UP HEADERS WANTED RAPE

• Shelbourne Advantage, Mentor & SR 2500H • Hesston 8100, 6500 & 6400 • John Deere • Claas Maxi • Vicon • Stemas • Fortschritt 68836

Buy and sell online — www.farmads.co.uk

steelwork, eaves beams, purlins & bolts

NEW Holland CX820 combine, 2004, 6 walker, 2600 engine/2050 drum hrs, chopper/chaff spreader, air con, 710 tyres, 11'2" wide, c/w 20' high capacity autoﬂoat header & trailer, excellent condition, barn stored & annually dealer serviced. £60,000. G Stevens Tel 07770 970320 (Glos)

Wi Mersrhying our cust Happy Christma omers a New Y s & ear

JOHN Deere 1170, 1997, 2340 engine hrs, 5 straw walker, 14' header & trolley, air con, chopper, hydro, excellent condition. G Shreeve Tel 07867 554909 (Norfolk)

Ian Houlgrave

Tel: 01507 466352 Mobile: 0780 134 3023 Fax: 01507 462812 Email: ian@ianhoulgrave.com

100,000 BTU Concept 2 Multi Fuel Cooker Used for central heating, cooking and baking Runs 20 radiators 2013 John Deere T670i, very clean example, 1006 drum hrs, 1489 engine hrs, call for more details. P Liverton Tel 07850 888002/01206 230662 (Suffolk)

COMMERCIAL Spanish tunnels, 5ha available, new in 2012, buyer to dismantle & arrange haulage, for more information please contact. S Melton Tel 07988 585009 (Cambs)

£2,150 0114 257 8891

delivered free nationwide

68950

2016 Shelbourne Reynolds CVS20 stripper header (20') plus trailer, only 72.7 running/harvesting hrs, ﬁts Claas Lexion combine, viewing welcome. A Wylie Tel 07870 928422 (Worcs)

5 year warranty

January 2020 www.farmads.co.uk 203

fg_class_jan_20.indd 203

12/12/2019 16:26

‘

GRUNDY

Five Mile Lane, Washingborough, Lincs 01522 790720

AGRICULTURAL

MILESTONE SPRAYERS Protecting Your Crops And The Environment

Ex demo Deutz 7250 TTV Warrior 246hp, unregd, 67hrs, 50k, Vario trans, autosteer, air cab, air brakes, f/axle braking, Isobus, iMonitor, 5 spools, f/links, f/PTO, Comfort pack, 650/65R 42 & 540/65 R34 tyres 0% Finance POA

Ex demo Deutz 6215 RC Shift 226hp, unregd, 165hrs, 50k, 5 ranges, 6spd p/shift & creep, manual, semi auto & fully auto gears, autosteer ready, air cab, air brakes, f/axle braking, Isobus, iMonitor, 5 spools, f/links, Comfort pack, 650/65 R42 & 540/65 R34 tyres 0% Finance POA

Ex demo Deutz 6165 Powershift 171hp, unregd, 21hrs, 50k, semi powershift manual transmission, 5x ranges,(6x speed p/shift) 4 manual spools, f/links, 520/70 R38 & 420/85 R28 tyres POA 0% Finance

Ex demo Dieci Agri Plus 40.7 VS unregistered, 235hrs, 152hp FPT engine, 4000kg lift capacity, 7m lift height, 40k, vario transmission, air con, pickup hitch £59,000 0% Finance

Ex demo Amazone 5002-TS 5m Catros+ shallow stubble cultivator DW roller, hydraulic depth adjustment

New Weidemann T5522 telescopic handler 50hp, 30k, hydrostatic transmission, 3 position steering, lift height 5.5m, lift capacity 2200, pallet tines, 3yrs warranty

Used Deutz 7250 TTV Warrior 263hp, 65 reg, 4200hrs, 50K vario transmission, f/links, air cab, air brakes, auto steer ready, Isobus, iMonitor, 5 spools, 650/65 R42 50% & 540/65 R34 25%, v clean/ £58,000 tidy, fully serviced

Used Amazone ZA M 2200 spreader 2004, 24/36m discs, L/H border limiter, hopper cover, lights

£29,750

0% Finance

£40,500

New Amazone ZA V 3200 Super Proﬁs Control spreader weigh cell, Amaspread controller, 24/36m discs, tank low level sensors

£1,650

POA

0% Finance

David Grundy 07879 698473

Karl Gladding 07500 448243

68536

All prices + VAT

Case TS 3000L 20/21m boom, 5 section boom, Multi tracking d/bar, boom recirc system, clean water rinse, brand new RDS Delta 34i controller, super clean sprayer, one owner from new POA

Case TS 3000L 12/24m boom, 4 section, boom recirculation, Multi Trak drawbar switchable from cab, new type 5-way plumbing, clean water rinse system, a real minter POA

2011 Knight Anglia 3000L very simple to set up & use, Muller controller, 12/24m HD boom, air shut off, 6 section boom, air bag susp, Self Trak drawbar, been on same farm from new, got to be seen POA

2000 Case SP3000 Self Propelled 3000L tank, 12/24m HD boom, upgrade to Delta 34i rate controller, new parts throughout, probably the best one available today, anywhere POA

Gem McAvoy Self Propelled articulated steer, mechanical 4wd, high ground clearance, 12/21m, Ramsey pressure system, 2/4 wheel drive, high & low gear box, very cheap s/p without tying up a tractor POA

Amazone UF1200 24m r/fold boom individual side folding, independent attitude with negative attitude, full electro hyds, Muller rate control, beautifully maintained & cared for POA

2007 Sands SLC 3000L 24m boom, Muller height control, headland assist, dual ride susp, rev camera, 2” fast ﬁll pump, 4spd hydrostatic drive, 2/4ws with road lock, 5 section boom, 14.9 34 rowcrops POA

Knight 3000L Series 4 boom, steering drawbar, ideal liquid fertiliser machine, Paser fast ﬁll pump, cheap sprayer

Case TS3000 trailed independant 12/24 m fold boom, Multi Trak d/bar, switchable ﬁeld/road mode c/w steering, new Delta 34i rate control, new type 5-way plumbing, dry sight gauge, very tidy sprayer POA

POA

Call us for details or see our website for more www.milestonesprayers.com

69222

69113

PROTECH

W&M Agricultural Engineering Oswestry • Shropshire • SY10 7JU

All prices + VAT

4700hrs, 2015 (15 reg), boom susp, PUH, 405/70-24 (new), fully serviced, Lola certiﬁcate

Merlo 32.6 Plus

2010, 6300hrs, boom suspension, air con, air seat, pick up hitch

POA

Merlo 34.7 Plus

2011 (61reg), 4900hrs, boom suspension, pick up hitch, trailer brakes, air con, air seat

POA

Merlo 40.7 Turbo Farmer

POA

We have recently become dealers for Corvus 2 year warranty See our website for full details

£28,000

Call for details

Merlo 32.6 Plus

2016, 3800hrs, pick up hitch, air con, boom suspension, Grammer air seat, 24”wheels

0% Finance*

2m wide, 1.6m3 cap, loader or handler bracket, root chopper option CALL FOR DETAILS

bed, 5’ beavertail, hyd ramps, hi spd axle, air/hyd brakes, l/s, 215/75R17.5 tyres, LEDs, spr adj d/bar, 2018

Available on all secondhand Merlos *T&Cs apply Limited offer

£12,000

BFX-180 Wessex International Abbey 2250R tanker round bale feeder able to spike, 2005, sprung drawbar, 30.5R32

load & feed out silage, hay, haylage, bales up to 6’x5’ & 1000kg, L & RH

on 50% of the RRP 2+22

£6,850

DUE IN, 2013, twin auger, direct tractor 10 stud ADR axles, 425/65R22.5 control, f/RH & r/LH door, new augers tyres, hyd door & grain chute & knives, full service & all oils changed

NC low loader trailer 16t, 20’

£4,250

£7,850

£13,850

Kuhn 2270 Euromix diet feeder West 14t silage/grain trailer

NC I SER 14t silage/grain

trailer 105kph axles, h/d spr susp, hardox body, 50o tip, hyd r/door, air/ hyd brakes, l/s, 560 Alliance tyres

£13,250

NC 26’ bale trailer 16t, spr d/bar, BOM FEEDER BUCKETS commercial hi spd axles, 445/4519.5 tyres, oil brakes with load sensing, 4m 8t alloy ramps, LEDs

£17,500

POA

£12,850

www.wm-agrieng.co.uk

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

07850 144244 (mobile 24hrs) • rory@milestonesprayers.com

wheel, mech 8000 pump

Ford New Holland 6640SL L reg, 4wd, Mailleux loader, 6500hrs

01691 683825 • John Mottram: 07968 715 512 • Mike Worthing: 07709 089 78 • email: john@wm-agrieng.co.uk 204 www.farmads.co.uk January 2020

fg_class_jan_20.indd 204

12/12/2019 10:45

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

East Anglia’s ﬁrst choice for new & used tractors

MF 7620 2014 front linkage & PTO 7475hrs 51048249

MF 7626 2014 front linkage & PTO 4600hrs 51048035

£1 45 ,00 0

Fendt 828 Proﬁ 2018 1750hrs warranty very good condition 21048127

Fendt 828 Proﬁ Plus 2018 750hrs warranty very good condition 61048300

£6 6,0 00

Fendt 828 Proﬁ Plus 2019 314hrs warranty very good condition 31047145

£5 5,0 00 MF 7716 2017, front weights, 1700hrs warranty 31048420

MF 7720 2017 front linkage, 2500hrs warranty 21048354

£7 2,0 00

MF 7715 2016, f/linkage, 1800hrs, very good condition 31047758

Merlo TF35.7-115 2017, 2200hrs, vgc 21046901

£1 27 ,00 0

£1 ,55 0 Fendt 1500kg front weight as new 41048003

PO A

Kverneland 4MTE combi disc coulters 2013, very good condition 41048402

MF 7716 2016 2650hrs warranty 41047214

£5 0,0 00

£1 29 ,00 0

£6 7,5 00 £9 ,50 0 £1 6,5 00

Spearhead Twiga 655T hedgecutter 2013, good condition 51048445

£5 7,5 00

£4 2,0 00 £1 6,5 00 £7 2,0 00 MF 6714S 2017, front weights, suspension warranty 31048421

Challenger Rogator 655C 36m 2015 5250hrs 41046608

£4 9,0 00

£3 8,5 00

MF 5713S 2018 front linkage, 320hrs warranty 51048245

Fendt 720 Proﬁ 2015 5000hrs good condition 61048001

Househam Merlin 32m sprayer 2014, 4330hrs 31046998

£6 3,0 00

£5 3,5 00

Fendt 724 Proﬁ Plus front PTO, 4077hrs good condition 21047432

Bailey 15t trailer c/w silage side 2019, very good condition 51048446

£5 0,0 00

£9 0,0 00

Warwick 18t trailer 2017 very good condition 31048065

Valtra T163V 2014 3350hrs good condition 21048356

Buy and sell online — www.farmads.co.uk

£1 5,0 00

NH T6.175 Dynamic Command 2018 470hrs vgc 51048008

£5 5,0 00

£6 0,0 00

Call 07798 585624 • jamesclark@tnsgroup.co.uk

MF 7618 2014 front weights 3600hrs 61047169

Fendt 716 Proﬁ 2015 5500hrs good condition 51046789

See our full range at www.tnsgroup.co.uk

68831

Prices do not include VAT or shipping

January 2020 www.farmads.co.uk 205

fg_class_jan_20.indd 205

12/12/2019 10:47

Used Kuhn Espro 6m new cultivation discs

Fax: 01767 677451 Fax: 01536 373392

A PO Case IH Maxxum 125

PO 2019 Claydon TS Hybrid drill EX DEMO

Kuhn Vari-Master 153 5f hyd f-furrow

£1 1, 95 0

Ex Hire Case IH Farmlift 742 2019, JCB headstock

£4 4, 25 0

A Case IH Puma 175 & 240 CVX tractors in stock Pro 700 f/linkage

01767 677316 01536 373238

£1 5, 35 0

John Deere 8630RT 2012, 3421hrs

Case MXM 190 Pro 2007 5425hrs 50k

Abbotsley Brigstock

£6 3, 00 0

£7 5, 00 0

£2 4, 25 0

£1 75 ,0 00 Case 8240 2015 35’ header, 690 rotor hrs

Kioti K9 utility vehicle EX DEMO SPECIAL OFFER

Please visit our website to view our full range of new and used machinery available www.collingsbrothers.co.uk email: jason@collingsbrothers.co.uk

68800

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

A B

Rodney Cowle Machinery

Over 25 combines in stock – see our website for details

We can supply New Parts for your Combine • CONCAVES • RASP BARS • BELTS • KNIVES 2000 New Holland TC56 Hydro 2015 New Holland TC 5.80 Plus choice of 2, rotary separator, 15’ 16’ varifeed, smart sieves, chopper, • CLEAN GRAIN, RETURN & cut, chopper, chaff spreader 2500 eng chaff spreader, only 400hrs, like new FRONT ELEVATOR CHAINS hrs in immaculate condition • IMPELLOR PLATES • RETRACTABLE FINGERS • FILTER KITS and many other wearing parts in stock MAIL ORDER

01837 83645

2005 New Holland TX66

SL sieves, chopper, chaff spreader, 2200/2600hrs, 24’ cut, autoﬂoat, very nice machine

2010 New Holland CX 8070

2005 New Holland TX66

24’, varifeed, 1250/1500hrs SL sieves, Sl sieves 20’ cut auto ﬂoat, chopper chopper/chaff spreader 1900/2300hrs, nice tidy machine

2008 Massey Ferguson Activa 7245

2006 Claas Lexion 550 Montana 1989 New Holland 8070 with V660 header, chopper, chaff spreader, 1100/1600hrs

1 owner from new 13’ cut, air con 2900hrs, in immaculate condition

2009 Claas Lexion 570+

2009 Claas Tucano 430

2007 Claas Medion 310

Hillside machine with 18’ cut, 1 owner only 590 engine hrs

Rodney

07831 178271 Steve

07786 391816

Great Punchardon Farm Winkleigh Devon EX19 8DJ

2010 Claas Lexion 520

V600 Vario 3D sieves chopper/chaff spreader auto contour, yield/moisture 1000/1300hrs

V750 header, 900/32 tyres, chopper/ chaff spreader, 900/1200 hrs, in very nice condition

email: sales@rodneycowlemachinery.co.uk

1200/1500hrs, V600 vario, 3D sieves, chopper/chaff spreader

•

choice of 2, one has 950hrs & other 1800, 15’ cut 3D sieves & chopper

www.rodneycowlemachinery.co.uk

69315

206 www.farmads.co.uk January 2020

fg_class_jan_20.indd 206

13/12/2019 12:52

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268 68310

ll ing a Wishstomers a s a u our c y Christmus o p r p Ha Prospe r & a ew Yea N

JOHN DEERE 5115M 2018, 924hrs, power rev 16/16 40kph, 600/65R34 - 480/65R24, 3 manual SCVs, loader ready Stk No 11052451 £43,000

JOHN DEERE 6145R 2018, 1197hrs, Direct Drive 50kph, 520/85R38 – 480/70R28, TLS f/& cab susp Stk No 81051530 £75,000

JOHN DEERE 6175R 2015, 5371hrs, Autopower 50kph, 520/85R46 - 420/85R34 f/& cab susp, f/linkage & PTO Stk No 11045036 £62,500

JOHN DEERE 6150R 2014, 6451hrs, Direct Drive 50kph, 650/65R38 - 480/70R28, TLS, HCS, Command Arm, 3ESCVs Stk No 51053739 £45,000

JOHN DEERE 6195R 2019, 224hrs, Direct Drive 50kph, Premium Ed, 650/85R38 600/70R28, Command Arm, 4SCVs Stk No 81051220 £106,000

JOHN DEERE 8370R 2017, 1017hrs, E23 50kph, 800/70R38 - 600/70R30, ESCVs, f/& cab susp, a/brakes, w/wts, LED lights Stk No11052921 £156,000

JOHN DEERE 6210R 2012, 4884hrs, Autopower 40kph, 650/65R42 540/65R30, front & cab susp Stk No 11052302 £55,000

HIRE 01728 628325 Mark Debenham 07710 148420

MAULDEN 01525 405848 Gary Buckle 07712 556387

CROMER 01438 861257 Robert Vigus 07712 556389

GROUNDCARE 01206 230283 James Tuckwell 07932 107618

SUDBURY 01787 374100 Paul Coffey 07766 225174

JOHN DEERE 6215R 2015, 5298hrs, Direct Drive 50kph, 650/65R42 – 600/65R28, Command Arm & j/stick Stk No 21051239 £80,000

JOHN DEERE 8360RT 2012, 4759hrs IVT 42kph w/rh, 30” tracks 40%, 5ESCVs, Cat 4 h/d d/bar, leather trim, no AMS components Stk No 11052014 £100,000

Prices do not include VAT

JOHN DEERE 6170R 2012, 4095hrs, Autopower 50kph, 600/65R28 – 650/65R42, TLS, f/linkage Stk No 81038800 £50,000

JOHN DEERE 8520T 2003, 10192hrs, p/shift g/box, 30” tracks @ 30%, 4ESCVs, Autotrac ready, SF ITC & brown box, gc Stk No 11050569 £32,450

JOHN DEERE 6140R 2014, 6872hrs, A/Q 40kph, 580/70R38 - 540/65R28, f/& cab susp, Autotrac ready & f/linkage Stk No 11052537 £45,000

JOHN DEERE 6155R 2017, 2276hrs, A/Q Plus 50kph, 650-65R38 – 540/65R28, Autotrac ready, TLS front susp Stk No 81045034 £72,000

JOHN DEERE 8370R 2017, 2084hrs, IVT 50kph, Ultimate Ed, IF800/70R38 - IF600/70R30, cab susp, 5ESCVs, a/brakes, LED lights Stk No 21043247 £140,000

JOHN DEERE 6130R & 643R LOADER 2016, 3079hrs, A/Q 50kph, 520/70R38 - 420/70R24, TLS & cab susp, Autotrac ready Stk No 81040922 £45,000

JOHN DEERE 6190R 2012, 6494hrs, A/Q Plus Eco 40kph, 540/65R30 - 620/70R42, 4 manual SCVs, Autotrac ready Stk No 51052410 £45,000

JOHN DEERE 5115M 2019, 40kph, 420/85R38 - 380/85R24, 3 mech SCVs, hyd trailer brakes, 2 stackable mid SCV with j/stick r loader ready Stk No 21050263 £45,000

JOHN DEERE 6150R 2012, 3583hrs, IVT 50kph, 650/65R42 - 600/65R28, 3ESCVs, cab & f/susp & f/linkage Stk No 11051652 £62,000

Buy and sell online — www.farmads.co.uk

JOHN DEERE 5115M 2018, 958hrs, power rev 16/16 40kph, 600/65R34 - 480/65R24, 3 manual SCVs, loader ready Stk No 11052448 £43,000

JOHN DEERE 8370RT 2014, 3043hrs, A/P 40kph, 30” tracks @70%, 5ESCV, Autotrac ready, 4600 screen, fridge, Cat IV r/linkage/d/bar Stk No 81053699 £110,00

www.tuckwell.co.uk

RAYLEIGH 01268 783311 Tim Thornton 07557 922965

DUNMOW 01371 875751 Olwyn Poulson 07710 135644

WORLINGWORTH 01728 628325 Tom Mason 07957 844986

ARDLEIGH 01206 230283 Mark Debenham 07710 148420

January 2020 www.farmads.co.uk 207

fg_class_jan_20.indd 207

12/12/2019 10:50

& SPARES

VADERSTAD Rapid 400F, clean & tidy with cleated tyres, System tine. ÂŁ4,250+VAT. S Matthews Tel 07885 622209 (Beds)

HIREPARTSREPAIRS Over 30 yearsâ&#x20AC;&#x2122; experience

Lexion & Dominator We supply the following new parts combine hire CONCAVES RASP BARS BELTS Fabrication & repairs KNIVES CHAINS FINGERS Breaking 100s of machines FILTER KITS

01926 614345

and many other wear parts

JMT Engineering (Ladbroke) Ltd

ÂŁ10,250

DOORS

Roller shutter doors made to measure We also repair all types of industrial doors We can erect or make alterations to steel work for new door openings Call for free site survey

Contact James French

07764 873486

jamesfrench328@gmail.com

email: jmtengineering@btconnect.com â&#x20AC;˘ www.jmtcombinehire.co.uk

DRILLS DIGGERS, DOZERS & DUMPERS KRAMER Allrad 312SE small loading shovel, needs TLC. POA. D Leigh Tel 07502 661861 (Northants) JCB 3CX, 1983, 4 in 1 bucket, pallet forks, 3 digger buckets, Extra-dig, Perkins engine, runs well & mechanically sound. ÂŁ4,000+VAT ono. M Woodford Tel 07752 088421 (Bucks)

SANDERSON back plate & bucket, tipping rams & pipe, good wear edge, vgc, working order. ÂŁ350. R Short Tel 07715 020528/01778 343478 (Lincs) SNOW plough blade, beat the Beast from the East, just need to fabricate a frame for your forklift. ÂŁ250 ono. M Gardner Tel 07772 170938 (Suffolk)

2015 Takeuchi TB216

2012 Takeuchi TB250

01493 750999

13-69368

www.jmurrell.co.uk

battlefieldmachinery.com

ACCORD DL seed drill, 4.8m, excellent condition, ideal for 24m tramlines. E Mackereth Tel 07966 381990/01524 272201 (Lancs) LELY power harrow 4m combi drill, condition is used, will go straight to work, used this year to drill OSR, runs smooth, no knocks or rattles, welcome to see running, c/w control box & user manual, tines on power harrow are around 50%. L Swaby Tel 07853 281263 (S Yorks)

The Sky EasyDrill Available from Writtle Farm Machinery

Versatile no-till & conventional disc drill with low power requirement Please call for more information

2004 Simba Horsch Co4 drill with bean coulters & duets, very tidy. ÂŁ8,500+VAT. A Doel Tel 07957 820201 (Wilts)

www.writtlefarmmachinery.co.uk

07748 004794 01245 442224(T)

MASSEY 30 disc drills, 3 & 4 metre. M Cottage Tel 01799 584225/07989 297074 (Cambs)

5t, air con, 2 speed tracking, 2875hrs

www.jmurrell.co.uk

01493 750999

BARFORD SX6000 forward tip dumper, 6t capacity, 2000, gwo. ÂŁ2,950+VAT. R Spendlove Tel 07738 379616 (Derbys)

Breaking Seed drills

Accord â&#x20AC;˘ Amazone Sulky â&#x20AC;˘ KRM â&#x20AC;˘ Vicon Coulters, Metering Units,Â A frames Etc Call Craig on

07977 208205 (T)

GREENLAND/MASCHIO 3m combination drill, in good working order, Suffolk coulters, inc another drill for spares, Ashford. ÂŁ3,000. N Ridley Tel 01233 770435/07802 695311 (Kent)

TRACTOR CHIP TUNING and ECU remapping, up to 30% extra power, 10% extra economy. www. chipboost.com or call James on 07977 475955

EQUESTRIAN

TECHNEAT Terracast seeder unit, with Garmin Astro 5, pipework & control box. ÂŁ825. J Weston Tel 07803 270448 (Lincs) MASCHIO DM4000 / WEAVING (Accord copy) Mistral 4000 4m combination drill, 32 Suffolk coulters, tramlining, markers, etc, P/H tines 70% good & all rotors tight/leak free, tidy outďŹ t ready to go, been on same small farm from new, many spare included. ÂŁ4,650+VAT. GDO Howell Tel 07903 089391 & 01728 723683(T) (Suffolk)

LELY 4m Roterra/drill combination, vgc light acreage, stored inside, toothed packer roller, can deliver. ÂŁ3,600+VAT. R Lane Tel 07831 615912 (Cambs)

ENGINE DIAGNOSTICS/ PERFORMANCE

VADERSTAD markers. ÂŁ170. M Abblitt Tel 07720 839253 (Cambs)

ÂŁ17,000

ÂŁ11,250

1584hrs, Q hitch, 4x buckets, serviced

01743 464100 Richard Evans 07375 508366 richard@battlefieldmachinery.com

15-69202

68902

MF30 drill 3m, trailed, tramliners, professionally adapted, with additional frame, strong pigtails & hydraulic lift, ideal for beans or late cereal drilling in difďŹ cult conditions, very good tyres, 12.4/11-28 Goodyears - Diamond sidewalls. ÂŁ825. J Weston Tel 07803 270448 (Lincs)

51-69294

sales@timik.co.uk

Combi Drill

14-68968

69016

www.timik.co.uk

ROLLERSHUTTERDOOR SHUTTERDOORINSTALLATION SHUTTERDOOR DOORINSTALLATIONREPAIR INSTALLATIONREPAIR

Perkins & Ford/New Holland engines

New/Reman, Dyno tested, engine blocks & parts available New JCB 444 engine stock! Tier 2 & 3 engines â&#x20AC;&#x201C; 55kW, 63kW, 68kW, 74kW, 85kW, 97kW and 108kW available

01489 896 626

Used Pottinger Aerosem

CAT 308E, 2017, fully spec, twin circuits, reversing camera, Dromone quick hitch, 12", 36" & 6' grading bucket with bolt on reversible blade, air con, radio, steel tracks with city rubber pads, only 210hrs, owner driver, EPA ticker. POA. MK Tractors Tel 07768 553833/01462 813390(T) (Beds)

13-69369

Trade advertising â&#x20AC;&#x201D; Tel: 01473 694455 Email: classified@farmersguide.co.uk

timikenginerecon

DAEWOO Solar 130 excavator, 1999, 9126hrs, but still used occasionally, 75% tracks, air con, quick hitch. ÂŁ14,000. S Bartle Tel 07884 238552 (Notts)

15-69311

ENGINES

KUHN 4m power harrow/drill combi, 1995, HR 4002D Kuhn 4m with transport kit & demount legs, 1997, pneumatic DA-S Kverneland Accord Ferrag, Accord ESC MĂźller Elektronik (with tramlining), used on small farm. R Biggs Tel 07763 978064 (Lincs)

WESSEX Clubman horse trailer, good condition, recent new ďŹ&#x201A;oor, good tyres & brakes. S Frederick Tel 07909 531801 (Kent)

208 www.farmads.co.uk January 2020

fg_class_jan_20.indd 208

12/12/2019 16:37

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268 69231

Supporting the rural community throughout East Anglia Your first stop if you are looking for: • Agricultural machinery sales • Machinery service & repair • Livestock equipment, animal medicines & animal health products • A variety of other items including fencing materials, pest control, hydraulic hoses, oil, tools, workwear and country clothing

FROM 8AM–5PM (ANIMAL MEDICINES AV AV VAILABLE AILABLE FROM 9.30AM–2.30PM)

For more information please visit us in store at Unit 41c, Lady Lane Industrial Estate, Hadleigh, Ipswich, Suffolk IP7 6BQ, or get in touch with us: Visit our website www.bradfarm.co.uk | Call 01473 827060 | Email sales@bradfarm.co.uk

Over 260 quality used machines updated daily at reavalleytractors.com 11021250

41017100

31019520

11020775

11019621

11020358

JOHN DEERE 6210 2013 A/Q 50K, Front linkage, TLS + Cab suspension, 4 ESCV, Twin beacons, Air con, Tyres 0%, 7804hrs. £POA

JOHN DEERE 6210R 2014 AP 50K, Autotrac ready, Command Arm, 4ESCV's, ALO loader ready, 5526hrs. £60,000

JOHN DEERE 6210R 2014 D.D 50K, Air Con, Roof Hatch, TLS, Cab Suspension, Autotrac, Itec HMS 6560hrs. £55,000

JOHN DEERE 6195R 2017 A/Q 50k, TLS +Cab suspension,3 spools, air con, sun roof, 2347hrs. £82,000

JOHN DEERE 6190R 2014 AQ+ 50K, LHR 20/20, Itec HMS, TLS, Cab suspension, Air Con, Sun Roof, 1740hrs. £70,000

JOHN DEERE 6175R 2015 AQPlus 20/20, 50k, 7" Display, ITEC-HMS, Rear-Power Beyond, Passengerseat, ElectricJoystick, 1900hrs. £POA

51007420

21016322

11018954

41020277

11020342

JOHN DEERE 6155R 2017 AutoQuad Plus 20/20, 50K, 7" Display, Auto Trac Ready, ITEC-HMS, Electric Joystick, 1022hrs. £76,000

JOHN DEERE 6145R 2017 AQ+40K, Autotrac ready, 7" 4100 display, TLS, roof hatch, 1980hrs. £65,000

JOHN DEERE 6130R 2017 AQ+ 40K, 24/24, Isobus/Greenstar ready, 4100 7" display, 3ESCV, TLS, 750hrs. £65,000

JOHN DEERE 6120M 2018 PQ, 40K, TLS,Air con, Roof hatch, 1382hrs.

JOSKIN KOMFORT 2 18000 TANKER 2017

JOHN DEERE 6130R 2017 AQ+ 40K, 24/24, Isobus/Greenstar ready, 4100 7" display, 3ESCV, TLS, 1400hrs. £POA

NEWPORT

£37,500

Call: 01743 289104

Rea Valley Tractors Ltd All prices ex VAT

£49,000

Buy and sell online — www.farmads.co.uk

OPEN WEEKDAYS

SHREWSBURY

enquiries@reavalleytractors.com

SUDBURY

WELSHPOOL www.reavalleytractors.com January 2020 www.farmads.co.uk 209

fg_class_jan_20.indd 209

12/12/2019 13:07

2019 EX-HIRE TRACTORS

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

LOW HOUR 2019 EX-HIRE TRACTORS - AVAILABLE NOW!

IN STOCK

£94,950

11050876 JD 6155R 2019, From 650hrs, AutoPowr, 50K, TLS, HCS, air brakes, 4600, AutoTrac, 650/65R42, 540/65R30, 3ESCV, ABS, air seat, A/C

£114,950

31050871 JD 6195R 2019, 520hrs, AutoPowr, 50K, TLS, HCS, air brakes, 4600, AutoTrac, 710/70R42, 600/70R28, 4ESCV, ABS, air seat, A/C, 3ESCV

£95,950

41050880 JD 6155R + FRONT LINKAGE 2019, 595hrs, AutoPowr, 50K, TLS, HCS, air brakes, 4600, AutoTrac, 650/65R42, 540/65R30, 3ESCV, ABS, air seat, A/C

£112,950

31050873 JD 6195R 2019, 890hrs, AutoPowr, 50K, TLS, HCS, air brakes, 4600, AutoTrac, 710/70R42, 600/70R28, 4ESCV, ABS, air seat, A/C, 3ESCV

£106,950

11050875 JD 6175R 2019, 690hrs, AutoPowr, 50K, TLS, HCS, air brakes, 4600, AutoTrac, 650/65R42, 600/65R28, 3ESCV, A/C, air seat

£119,950

11050866 JD 6215R 2019, 628hrs, AutoPowr, 50K, TLS, HCS, air brakes, 4600, AutoTrac, 710/70R42, 600/70R28, 4ESCV, ABS, air seat, A/C, 3ESCV

41050868 JD 6215R 2019, 662hrs, AutoPowr, 50K, TLS, HCS, air brakes, 4600, AutoTrac, 710/70R42, 600/70R28, 4ESCV, ABS, air seat, A/C, 3ESCV

ALL 2019 Machines with Connectivity Packages

IN STOCK

• AutoTrac Complete, 6000 Dome, SF1 Activation • JDLink Connected - Access and 5 Year RDA • Full machine/connectivity training

£152,950

31050860 JD 8320R 2019, From 510hrs, PowerShift, 40K, ILS, 5ESCV, 710/70R42, 600/70R30, AutoTrac, 6000 dome, activation, 4600 screen, drawbar, A/C, air seat, PTO, Premium radio and connectivity, electric mirrors, leather

ALL 2019 Machines with 900kg front weight ALL 2019 Ex-Demo Machines • 0% Interest on 50% of the selling price - 1+1 Payments* • 3 months warranty on all machines • 5000hrs / 5 Year warranty option available to purchase* *Subject to terms and conditions. Available on request

01844 278843 sales@farol.co.uk www.farol.co.uk

Our Milton Common OX9 2NZ Yard Prices each,exclude VAT ex yard. Whilst stocks last. Correct 2/12/19. Please check hours and availability. E & OE

210 www.farmads.co.uk January 2020

fg_class_jan_20.indd 210

12/12/2019 10:54

FARMERS - Advertise your â&#x20AC;&#x2DC;for saleâ&#x20AC;&#x2122; and â&#x20AC;&#x2DC;wantedâ&#x20AC;&#x2122; on-farm machinery for free. See coupon on page 268 Wold Farm Park â&#x20AC;˘ Old â&#x20AC;˘ Northants

NEW MACHINERY IN STOCK

T: 01604 780087 M: 07805 707605 E: sales@morganfarm.co.uk

Opico 795 QF 18t PTO Gas Grain Dryer c/w hydraulic top

POA

S/H 8â&#x20AC;&#x2122; x 4â&#x20AC;&#x2122; Ifor Williams Trailer c/w ladder rack, spare wheel, props & ramp POA

Opico 555XL 12t Gas Grain Dryer c/w electric drive & horizontal cross auger

POA

USED MACHINERY IN STOCK

Opico 590 QF 12t PTO Grain Dryer c/w standard top & pre cleaner

Portek Scatter Bird Gas Powered Bird Scarer

POA

69363

POA

New & Second Hand Mecmar Grain Dryers supplied

Deutz 5110 & stoll loader 2015 Deutz 6180, 2014 Deutz K430 c/w loader JD 2850 2wd McHale 660 round baler ready for work Welger 220 Mastercut round baler Welger 435 2008 Welger V160 E-Link 2016 8000 bales Bomford 3m heavy duty shaft drive topper Twyman 10â&#x20AC;&#x2122; flail mower Twose 280 flail mower Einbock 6m grass harrows Lely Roterra 4m power harrow Sumo Trio 3m c/w seeder 2013 trailed little work Dowdeswell 5 furrow reversible plough Kuhn 700G11 disc mower Kuhn FC313 mounted mower conditioner Kuhn MDS1141 QL fertiliser spreader KvernelandÂ Taarup 9142 single rotor rake KvernelandÂ Taarup 9578C twin rotor rake Teagle 40/40 tub feeder/bedder Teagle 80/80 SC feeder/bedder Conor 12m feeder mixer GrahamÂ Edwards 14â&#x20AC;&#x2122; tri axle cattle trailer Polaris Prostar quad bike c/w roll bar road legal Kawasaki 650 2017 quad bike excellent condition Twose 6.3m Cambridge rolls c/w paddles Edlington Cambridge rolls, 21â&#x20AC;&#x2122; hyd folding

POA

morganfarmmachinery.co.uk

Battlefield Machinery, Knights Way, Battlefield Enterprise Park, Shrewsbury SY1 3AB â&#x20AC;˘

Various Used Kverneland TL1500 & 1875s Geo Spreader & Border Spreaders 4, 5 & 6 bagger, all tidy From ÂŁ6,500

01743 464100

Used Pottinger Aerosem New McConnel PA6565 T Combi Drill 65hp, 6.5m telescopic disc coulters, pre ems, 1.5m head Lion 301 PH 2012 ÂŁ10,250 ÂŁ20,250

Buy and sell online â&#x20AC;&#x201D; www.farmads.co.uk

Deutz 5125 demonstrator, c/w Stoll loader Deutz 6165 powershift demonstrator Deutz 6215 TTV demo unit Kverneland 3332 mounted mower conditioner 3.2m Kverneland TAR 9464 twin rotor rake (mounted) Kverneland 5 furrow LB Variwidth 300hp headstock Kverneland FRO flail grass topper Redrock 20t industrial dump trailer Redrock 24t tri-axle low-loading trailer McHale 991EB bale wrapper, fully auto McHale round bale handlers Opico 6m hyd folding grass harrows WalterÂ Watson 6.3m flat roll WalterÂ Watson hydraulic rotating 12â&#x20AC;&#x2122; end tow flat roll WalterÂ Watson bull beef feeders Moulton FY4 yard scraper Kawasaki Mule Pro DX Kawasaki Mule Pro MX Kawasaki 750cc quad bike

s Wishing all our customer a Merry Christmas

& Happy New Year

6m CX Disc Coulters DF 2 front hopper, c/w press wheels, JUST THE DRILL ready to roll, new discs

ÂŁ14,000

2015 Kverneland EG 6f Plough wlll have 90% new metal

ÂŁ15,950

Kv Optima 8 Row PHR Maize Drill std hopper E-Drive Isobus c/w DF2 f/tank (refurbed 2016) v tidy, cheap capacity

ÂŁ11,250

Kubota RTV X900 17 plate , hyd tip, full cab, heater, radio, ball hitch ready to go!

ÂŁ6,750

Agricultural Engineers

Saddington Road Nr SHEARSBY Leics LE17 6PX

01162 478 999

Sales: Dave Griffin â&#x20AC;&#x201C; mobile 07712 509869

Richard Evans â&#x20AC;˘ 07375 508366 â&#x20AC;˘ richard@battlefieldmachinery.com

battlefieldmachinery.com *terms and conditions apply

69199

68774

www.athoughton.co.uk

January 2020 www.farmads.co.uk 211

fg_class_jan_20.indd 211

13/12/2019 09:52

69309

Visit our new website www.jfsales.co.uk

Agricultural Engineering

LTD

CASE Puma 165

2017, 50K, Air Brakes, 650 Tyres, Power Shift, Front weight, Choice of 4. £POA

CASE Puma 220

2017, 50K, Air Brakes, 650 Tyres, Power Shift, Front weight, Choice of 6. £POA

CASE Puma 165 CVX

2017, 50K, Air Brakes, 650 Tyres, Front Link, and/or PTO, CVX, Choice of 4. £POA

JOHN DEERE 7930 4300hrs 2008 40k P/Quad TLS POA

JOHN DEERE 7710 2000 9900hrs 40K P/Quad TLS tyres 95% POA

McCONNEL 078 LOADER to ﬁt John Deere 4 cycled tractors, all parts included to ﬁt £2,850

JOHN DEERE 6620 2006 7700hrs P/Quad TLS 40k tyres 95% POA

JOHN DEERE 6520 2004 6700hrs P/Quad 40K POA

JOHN DEERE 6320 2006 5000hrs P/Quad 40k TLS/cab sub POA

NEW SOLIS 50RX 4wd, open cab, 50hp

NEW SOLIS 50RX WITH LOADER 50hp A/C 4wd £19,995

SOLIS 26 WITH LOADER 26hp Mitsubishi engine, 4wd, 3 point links £9,995

JD 6195R 2017

50K, Air Brakes, 650 Tyres, Auto Quad, GreenStar Ready, ISOBUS, Choice of 8.

£POA

£12,995 Contacts:

James - 07714 278560 • Richard - 07860 661358

James@jfsales.co.uk • Richard@jfsales.co.uk •

Kings Farm, Milton Keynes, Beds

Holtractors Ltd 2019 NHT5-105 c/w MX 406 Loader c/w Euro h/stock, 67hrs, 4wd tyres 99% 480/70-R34, 380/60-R24, in as new condition, NH Warranty up to December 2021

2012 JD 6125R c/w JD H340 Loader 3600hrs, 50K, air brakes, TLS f/axle & cab susp, 125hp boosts to 145hp, r/tyres 65/70%, f/tyres 50%, p/seat, our own tractor in excellent condition

2016 JD 6120R Autoquad 500hrs, 120hp boosts to 140hp, TLS f/axle/cab susp, 50K, Starﬁre 3000, autotrac ready, beltline & loader lighting, JD623R loader, Command Arm, genuine 188hrs

JD 6830 2011 3583hrs, very good condition

2015 CX5080 c/w 6m header & trolley 1 owner/driver, straw/chaff spreader, immaculate condition, 480 engine hrs, 390 drum hrs, side knife

2019 Spearhead 460 topper as new, c/w mulching kit

| 30+ Tractors: Ford • NH • MF • JD • IH • Case | 30+ Balers always in stock: Welger • NH • JD • IH • Claas • Hesston • Gallignani • Bamford • Deutz-Fahr | 20+ Mowers in stock: Lely • Pottinger • Vicon • Kverneland • Taarup • JD • MF • IH • Ransomes • Deutz-Fahr • Tallis | 30+ Tedders, turners, rakes, mowers, oppers, forage wagons | 15+ hay grabs, accumulators, transporters | 30+ Trailers 3t–30t: agricultural, commercial, construction, dump, hay, general purpose, grain, silage, livestock, horsebox, dual purpose, plant, tippers | 30+ toppers, ﬂail mowers, etc | 15+ ploughs | 50+ discs, cultivators, drills | 10+ 360o Excavators/dumpers • Volvo • JCB • Hyundai • Hitachi • Benford 500+ items in stock – please look at our website for full descriptions and photos

69350

www.holtractors.co.uk

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Specialising in JOHN DEERE’s for over 30 years

Evening 01323 840077 • Mobile 07850 851941 • info@holtractors.co.uk 212 www.farmads.co.uk January 2020

fg_class_jan_20.indd 212

12/12/2019 11:02

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

Ref 51157032

Ref 31156322

2008 Case STX535 7350hrs, Price £75,000

2010 Case STX535 7203hrs, Price £87,500

Buy and sell online — www.farmads.co.uk

2017 Shelbourne HD860T hyd head, Price £19,500

Ref D1172990

Ref 6116778

2017 Marshall S/85 tipping, Price £6,750

2012 Shelbourne 760T 1.2m head, Price £12,500

Ref C1167735

2008 Spearhead 645T Sidearm, Price £6,500

2014 New Holland T8.360PC 3750hrs, Price £63,000 Ref 41167791

Ref 41171955

Ref K1168288

2006 Spearhead 645T T flails, Price £6,500

2017 New Holland T6.180EC 790hrs, Price £65,000

Ref K1170438

2016 New Holland T6.140 2740hrs, Price £42,500

2015 New Holland CR10.90 1535hrs, Price £175,000 Ref 21171618

Ref K1170635

Ref C1171430

2017 New Holland Boomer 40 52hrs, Price £22,000

2012 New Holland CR9090 2219hrs, Price 130,000

Ref K1173410

2015 New Holland CX6090 788hrs, Price £132,000

2013 Case Puma 215 5130hrs, Price £45,000 Ref 11172418

Ref G1166107

Ref C1172649

2015 New Holland TC5070FS 500hrs, Price £85,000

2014 Case Puma 185MHR 3950hrs, Price £45,000

Ref F1171651

2008 Case Maxxum 100XL 6500hrs, Price £29,500

Ref F1166912

Ref G1168294

Ref 21173969

1997 Case CS150 9620hrs, Price £16,500

1996 Richard Western 12t, Price £7,500

For more stock and photos visit our website

www.ernestdoe.com

For further details contact Matt Hart 01245 380311 or 07774 499962 Wayne Middleton 01245 380311 or 07836 201571 Ulting, Maldon, Essex CM9 6QH usedsales@ernestdoe.com

68311

January 2020 www.farmads.co.uk 213

fg_class_jan_20.indd 213

12/12/2019 11:03

Current Used Machinery Essex Depot: 01245 322733 | Kent Depot: 01233 714123 | Sussex/Hampshire: 01403 330030

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

www.rwcrawford.co.uk

MASSEY FERGUSON 7382 CENTORA

FENDT KATANA 65 FORAGE HARVESTER

CHALLENGER MT775E

£155,000 + VAT

£168,000 + VAT

£87,500 + VAT

£119,000 + VAT

2018, 270 Engine Hours, 210 Drum Hours, 25ft PowerFlow Header, Auto Guide Ready, TaskDoc Pro, Yield and Moisture Monitor.

2015, Approx. 1800 Engine hrs, Approx, 1250 Drum Hrs, Corn Cracker, Grass Header, Kemper 375 10 Row Maize Header PUH not included,

WARRANTY REMAINING

WARRANTY REMAINING FENDT 716 POWERPLUS

FENDT 720 PROFI

£89,500 +VAT

£99,500 + VAT

2017, 3405hrs, Cab Suspension, Front Axle Suspension, Air Con, Air Brakes, Guidance Ready.

2018, Approx. 670hrs, Cab Suspension, Front Axle Suspension, Air Con, Air Brakes, Guidance Ready.

WARRANTY REMAINING

01302 759969

2014, Approx.4900hrs, Comfort pack, 16 idler weights, 5 spool valves, Deluxe vrs leather seat, 30” ext ag tracks 60%,

WARRANTY REMAINING FENDT 313 PROFI WITH CARGO FRONT LOADER

£59,500 +VAT

2017, Approx.1800hrs, 40km/h, Front and Cab Suspension, Super Comfort Seat, 4 x E-SCV, Cargo 4x75 Front Loader with Boom Suspension.

Unit A7 Lords Wood Road, Harworth, Doncaster, South Yorkshire DN11 8BZ

CLAAS 75E

2016, 2300hrs, 30” Extreme Ag Tracks @ 65%, Guidance Ready, Comfort Pack, Weights: 22 x Front, 16 x Idlers & 18 x Track Frame.

£29,500 + VAT

2001, 9040hrs, Tracks @ 35%, No Linkage

WARRANTY REMAINING EX HIRE MASSEY FERGUSON 7720 S DYNA 6 (X2 AVAILABLE)

£85,500 + VAT

EX HIRE MASSEY FERGUSON 7718 DYNA VT

£86,500 + VAT

2019, Approx.150hrs, MultiPad Joystick, Front Linkage, Front and Cab Suspension, Air Brakes, Guidance Ready, Air Conditioning, Air Seat.

2019, Approx.150hrs, MultiPad Joystick, f/pto, F/Linkage, Front and Cab Suspension, Air Brakes, Guidance Ready, Air Conditioning, Air Seat.

WARRANTY REMAINING

info@moorefarmservices.com

DEMO MCCORMICK X7.690 POWER PLUS font linkage & PTO, air brakes, cab & front suspension

DEMO AMAZONE UF2002 with FT1501 front tank

2015 MCHALE ROUND BALE CHOPPER excellent condition

POA

£9,500

DEMO AMAZONE 4M CEUS CULTIVATOR

£47,000

ALSO IN STOCK/COMING IN SOON... 2019 KRONE BALE COLLECT bale accumulator 2017 KRONE B1000 CV Butterﬂy mowers 2013 KVERNELAND TAARUP 2632

2012 KNIGHT MOUNTED SPRAYER and front tank 24m booms, NSTS test

NEW 2019 KRONE EASYCUT R320 CV mounted mower

2019 NEW KRONE SWADRO 42 single rotor rake

£11,000

£12,750

£6,000

69253

All prices plus VAT

2012 AMAZONE CENIUS 3002 mounted cultivator 2004 MASSEY FERGUSON 6485 7300hrs KUHN AXIS 30.1 fertiliser spreader, hopper cover, RH limiter CLAAS 2900 Twin Rotor Rake

£17,000 POA £3,250 £7,500 £16,000 £3,000 £8,000

Spring stock of Amazone ZA-TS & ZA-V fertiliser spreaders Spring stock of Krone Mowers, Tedders, Rakes

www.moorefarmservices.com

214 www.farmads.co.uk January 2020

fg_class_jan_20.indd 214

13/12/2019 12:53

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268 CARIER Angleveyor chain & ﬂight conveyor with upward dogleg, 30' long, working order. Offers please. I Brown Tel 07710 775177/01279 422931 (Essex)

EQUESTRIAN (cont) PREDATOR Lynx poo hoover, like new, had very little use. R Wise Tel 07778 521229 (Oxon)

FARMER 80

FENCING & GATES

GENERATORS

YA ee us MS at

2017 Kawakenki 50KVA silent run diesel generator, as new. £3,000+VAT ono. M Millbank Tel 07879 633917 (Herts)

The Farmer 80 is the best selling machine & will take up to two 500m rolls working on both sides of the tractor. With an adjustable arm, optional extras, inc single & double strand barb attachments, re-rolling machine, hoist & loader/ telehandler bracket adaptor can be used 18-69061

John Brewer 07966 285240 johnquickfencer@yahoo.co.uk

www.quickfencer.com

GRAIN HANDLING/ STORAGE BENTALL Simplex PTO fan. £275. J Ramsey Tel 01653 628366 (N Yorks) KONGSKILDE vented grain bins, 20t, can be used for storage, taken down & ready for collection ex farm, sold as seen. £200. N Cobbold Tel 01473 823167/07776 210237 (Suffolk)

SEED & CEREAL ENGINEERING Main Agents for

CRASH BARRIERS & RAILWAY SLEEPERS

Northants

18-68994

07813 182054 01536 771246

www.usedcrashbarriers.co.uk

FORAGE & SILAGE HAYLAGE in 4’ round bales (34). £25/ bale. S Moore Tel 01953 883169 (Norfolk) FODDER beet for sale, in central Norfolk. C Eagle Tel 01603 759678 (Norfolk)

Visit our website...

Debenham, Suffolk Tel: 01728 861657 Mob: 07771 646075

chriscoe@bloomfieldinstallations.co.uk

BRICE Baker 9t metal bin. £100. M Wheeler Tel 01892 722532 eves (Kent)

Hall Farm, Aldeburgh IP15 5JD MF 2640 4wd tractor very tidy......... £6,250 Vaderstad 4m box drill c/w end tow kit..POA John Deere 1085 combine c/w Various cultivators & subsoilers............POA chopper..................................... £6,500 R&R 12t grain trailer c/w hydraulic 8t dump trailer ................................ £1,750 tailgate ...................................... £3,750 4m Carrier drill ................................... £500 Norton 8t drop side grain trailer ...... £2,500 Various grain buckets ...........................POA Kongskilde 4m manual fold Vibroflex .................................... £1,200 Reco Sulky 24m twin disc fert spreader with lights & cover ...... £1,000 McConnel Allwork tractor mounted saw bench ................................... £650 Horsch CO4 Drill ..................................POA All tractors and machinery wanted – dead or alive!

See our new website for more details & photos www.hallfarmmachinery.com

Tom 07872 916363

MASTER 9t mobile batch dryer, 1983, diesel ﬁred, 2810hrs, chaff fan & cyclone, always stored/ used inside, in excellent order & used harvest 2019. £4,350+VAT. R Maundrell Tel 07785 568800/01527 854834 (Warks) TRIPOD auger, 3 phase, 27' x 4.5". £250. M Wheeler Tel 01892 722532 eves (Kent) BRICE Baker 68t indoor hardboard bin. £250. M Wheeler Tel 01892 722532 eves (Kent) HARVEST Installations gas burner, humidity controls, on adjustable stand. £300. P Waudby Tel 07961 558831 (E Yorks)

CAD ASPIRATORS

Danagri High�Capacity Heavy�Duty�Mobile Grain�Augers

NEW & SECONDHAND CLEANERS AVAILABLE CLEANER SCREENS available for most makes NEW & SECONDHAND DRYING FANS Carier Elevators Conveyors and Spares

CHAIN & ﬂight conveyors, c/w 3 phase motor, 33'. £175. M Wheeler Tel 01892 722532 eves (Kent) QUANTITY of aeration laterals & ﬁttings. £75. M Wheeler Tel 01892 722532 eves (Kent) KONGSKILDE 60t indoor bin & drying vertical & horizontal ducting, plus 13 spare sections. £400. M Wheeler Tel 01892 722532 eves (Kent)

01472 753936 07710 242015

Roy Edwards 07702 408833 Full engineering, installation & dismantling services

www.grainmachinery.co.uk

Pellcroft Engineering Ltd

Coningsby, Lincoln t: 01526 342466 f: 343507 e: sales@pellcroft.com

www.pellcroft.com

GRASS MACHINERY

Also�Silos,� Elevators�&�Conveyors,� Driers,�Stirrers,� Fans�&�Accessories www.danagri-3s.com

Contact Robin on

• Fans – New & Reconditioned • Grain Stirrers • Air Tunnels • Laterals • Drive On Floors • Gas Burners • Controllers & ACCS Equipment

8”,�10”�&�12”�dia.

OLIVER GRAVITIES

Visit us at 6 Hall 8 Stand 11

68820

Tel: 01746 762777

for bushel weight improvement

22-68983

FOR SALE

MOTORWAY

Fabrication General engineering

GENERATORS: diesel & PTO, quality used & new, est 25yrs. JSP UK Ltd. Tel 01432 353050 Mob 07774 742182 (Hereford)

PLOT FEEDS

PROTECH P300S post knocker, 300kg weight, hydraulic slew/tilt, telescopic. £3,500+VAT. C French Tel 07768 733398 (E Sussex)

USED EQUIPMENT REQUIRED!

REINFORCED corrugated iron personnel access doors for grain silo (4), internal 42" x 35", external 42" x 39", hatch 32" x 30". Best offer. GW Harrold & Partners Tel 07836 751076 (Norfolk) TWO Svea 4" diameter augers, one 7m long with hopper, the other 3m long, with 3m extension if required, both with single phase motors & in good working order, sale due to retirement. £75+VAT each. S Potter Tel 07940 893034/01621 828270 (Essex)

Buy and sell online — www.farmads.co.uk

ROUND wrapped 4' x 4' bales of quality haylage. W Everitt Tel 01263 860112 (Norfolk) BAMFORD (Foster) forage wagon, vg order & ready to go, always kept inside. £1,100. J Cox Tel 07968 080694/07970 976476 (Oxon)

- Elevators - Grain driers - Dressers - Mill mix equipment - Augers - Grain plants - Installation services

22-68840

HORSE arena surface, 40x20m, silica sand & graded rubber, condition is used but in excellent condition as only used as hobby surface & cleaned/graded regularly, buyer to load & collect from premises near Biggleswade in Spring 2020. R Larman Tel 07730 356062/01462 701289 (Beds)

Specialising in used & reconditioned stock

22-68842

JF FCT1060 Pro-Tec forager, metal detector, 2013, electro-hydraulic controls, very good condition, new chute, sharpening stone & bottom feed roller, farmer's machine, high output; takes 6m of 1st cut, side load or PUH. £14,250+VAT. R Maundrell Tel 07785 568800/01527 854834 (Warks)

www.bloomfieldinstallations.co.uk

BLOOMFIELD INSTALLATIONS

BOMFORD TW4600 tri-wing topper, 4.6m, 2005. GW Harrold & Partners Tel 07836 751076 (Norfolk)

Kuhn GA 8731 £13,950 2 Rotor Rowing Up Rake

OPICO AND MECMAR driers bought and sold. Genuine parts available nationwide. Morgan Farm Machinery. Tel: 01604 780087 Northants(T) BENTALL Simplex PTO driven fan. £275. J Ramsey Tel 01653 628366 (N Yorks) CRITTALL grain bin panels. £33+VAT each; corner post also available. S Hall Tel 07702 259355 (E Yorks) KONGSKILDE 3 phase blower. £125. M Wheeler Tel 01892 722532 eves (Kent)

2014, working width up to 8.6m, steering axle, low acreage

01530 229686 or 07831 113316 23-69186

www.midlandsagriplant.com

January 2020 www.farmads.co.uk 215

fg_class_jan_20.indd 215

12/12/2019 16:50

Ancroft Tractors Ltd

R.C.Boreham & Co

New and used farm tractors, combines, farm machinery & forklifts

New & Used Machinery

SPECIALISTS FOR MORE THAN 30 YEARS

For all enquiries call: 01245 231320

Polaris Ranger 1000D

excellent condition, 2018, 577hrs

£33,000

Sumo Multipress 5m

3 rows of tines, press paddles, twin row of packer rings

£2,500

Honda TRX500FE

2005, 650hrs, 2760miles, very good condition, electric shift (no VAT)

£7,450

£20,500

Polaris Ranger 1000D

diesel 2016, good condition, power steering 768hrs

£5,250

Pottinger Servo 45S plough

ex demo, excellent condition, 6 furrow, hyd front furrow 0% Finance available

Fendt 724 Profi Plus

Challenger MT765C

Massey Ferguson 7618 EX

Merlo P38.14 Plus

15 reg, 5100hrs warranty till 5500hrs/Sep 2020, 5 spools, front linkage + PTO, on 710/60x42 600 fronts £65,895+VAT

09 reg, 4450hrs, 5CCLS spools, 30” tracks, autoguide ready with GreenStar unit, night breaker lights, 8 idler weights £76,850+VAT

£2,500

McHale 995LTSR wrapper

2002. good condition, static engine, 18,395 bales

£1,950

Sisis Multislit 1200

excellent condition, very little use, rear rollers

14 reg, 4400hrs, Dyna 6, 50kph, 4 CCLS spools, Multi-pad Datatronic, front linkage £38,850+VAT

£3,500

Ritchie Aerator 3

3m grass slitter, excellent condition

40kph transmission, joystick, 13 reg, 1050 genuine hrs, air seat, 20” wheels, work lights, reverse camera

£32,850+VAT

Windmill Way West, Ramparts Business Park, Berwick-Upon-Tweed TD15 1TB

Sisis Powaspred FS0780

01289 331904 07977 916170

almost as new, PTO drive

69264

tom@ancroft-tractors.co.uk

Lely Storm 130P Chelmsford, Essex CM3 1HU | rcboreham.co.uk | sales@rcboreham.co.uk

69303

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

£9,750

forage harvester, 2012 model, immaculate condition

£16,785+VAT

See more at Call us on

also at Kelso and Macmerry

01763 780440

2008 Vaderstad Carrier 300 disc roller c/w hydraulic controlled rubber packer

2005 Quivogne TM28 Tinemaster c/w discs, 5 subsoiler legs & steel packer

2010 Simba 4m mounted Xpress c/w 7 tine ST bar

£4,750 + VAT

£9,750 + VAT

Wootton 14t grain trailer full spec c/w rollover sheet and air brakes

Raven 30’ tri-axle low loader trailer c/w 10 stud ROR axle, air brakes in good order

2004 AS Marston Ace Root 12 trailer 10 stud axles, hyd tailgate, sprung drawbar

Simba 8.23m horizontal folding 1999 Cousins 12.8m vertical rolls folding rolls c/w 24” plain rings c/w 22” plain rings in quite tidy order which are half worn

£3,250 + VAT

£9,750 + VAT

2001 John Deere 6310TLS 4wd tractor c/w front susp & Powerquad 40K gearbox

1999 New Holland 8360 4wd tractor 1 owner from new, c/w AC & 90% tyres!

1989 Ford 7810 III 4wd tractor c/w good tyres & full set of front weights

1994 Caterpillar 75C rubber tracked crawler in really nice condition, done only 8036hrs

1998 Case IH CX90 4wd tractor c/w very good tyres & Quicke Q760 loader

POA

£9,750 + VAT

£19,750 + VAT

POA

£18,750 + VAT

£6,750 + VAT

£13,250 + VAT

Sumo Trio 3m mounted cultivator in tidy condition with 50% wearing parts

www.ancroft-tractors.co.uk

£7,950 + VAT

£16,750 + VAT

Dalbo 6m hyd folding mounted springtine c/w manual adjusting sprung levelling boards

£7,500 + VAT

£12,950 + VAT

69086

216 www.farmads.co.uk January 2020

fg_class_jan_20.indd 216

13/12/2019 09:52

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

JOHN DEERE 6110R 2017, 629 Hours, AutoQuad plus, 50K, Four Wheel Drive,Pick Up Hitch, Drawbar, 3 SCV’s, passenger seat, 420/85R24, 460/85R38 #21008612

£65,000

#11008620

£64,995

JOHN DEERE 732 SPRAYER 2013, 24m boom, 3200L capacity, 420/85R38, steering draw bar #21008081

£24,000

KRAMER KT357 CHALLENGER MT775E 2018, 585 Hours, 3.5t, 7m Boom Reach, Good Working 2015 year, 1918 hours, Warranty til March 2020, 30” tracks, RTK Reciever, Track weight, Front weight, 4 ESCV, Condition, Genuine Farm Machine 3 point linkage. #31009300

£139,000

JOHN DEERE 6130R 2017, 542 Hours, 50K AutoQuad, Front Linkage & PTO, 3 ESCV, Joy Stick Control, Air Brakes, TLS, HCS, Lighting Package, Powerguard Extented Warranty To Oct 2020

#11009808

£69,995

#31009787

£59,995

MASSEY FERGUSON 6455 2005, 4776 Hours, 420/85 R38, 340/85 R28, 940 Front End Loader, 2 SCV’s, Air Conditioning, Air Seat

#21009784

£19,995

Buy and sell online — www.farmads.co.uk

JOHN DEERE 5100M 2014,3814 hours, 16/16 synchromesh, 40K, Front Loader H260, Air seat, Hydraulic Brakes, Tool Box, Bonnet guard, work lights, belt line lights, quick release loader bracket, 3 SCV’S, hitch Window £29,995 #31007834

JOHN DEERE 6150R 2014, 2656 Hours, Direct Drive, 50K, TLS, Turnable Fenders, AutoTrac, GreenStar, ISOBUS, Passenger Seat, Heated Air Seat, Rear Lights, Belt Line Lights, Michelin 540/65R28 @ 75%, Michelin 650/65R38 @ 75%

JOHN DEERE 5100GF 2016, 2465 Hours, Narrow Cab Fruit Tractor, 24x12 PWR Reverser, 3 Point Linkage, Rear Hitch, Working Lights, PTO, Road Lights, 2 SCV’s #11009679

£25,000

JOHN DEERE 6210R 2014, 2914 Hours, AutoQuad, 50K, TLS, Turnable Fenders, Rear Fender Lights, Belt Line Lights, Preminum Seat, Passenger Seat, 3 SCV’s, Continental 540/65R30 @ 40%, Continental 650/65R42 @ 50% £66,995 #21007912

JOHN DEERE 855D POLARIS RANGER 705 Hour, Very Tidy Machine, Tow Bar, Mesh Doors, 4 Full Cab & Doors, 1202 Hours, Heater, Road Registered, Wheel Drive, Nearly New Tyres Road Lighting, 50KPH Automatic Transmission, Front Rack, Manual Tipping Back, 4X4, Front Tyres 5%, Rear Tyres 50% £11,000 #11009577 £7,500 #11005641

Stockbury: 01795 843250 | Framﬁeld: 01825 891111 | Ivychurch: 01233 225775 Call Harry Durrant 01795 502744

www.burdenbrosagri.co.uk January 2020 www.farmads.co.uk 217

fg_class_jan_20.indd 217

12/12/2019 11:08

TRACTORS

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

For more info call James Bowring on 07500 786742 or head office on 01623 847171

2009 Fendt 933

2014 New Holland T7 200 Auto Command CVT transmission, 50kph road speed, Front linkage & PTO, 4 rear spools valves, Air brakes,650/65 R38 & 540/65 R28 tyres with 35% tread left, 3512 hours.

Versu Specification, Powershift, X Demo unit ,Front & cab suspension, 3 rear spools, Air & hydraulic brakes, Air suspended seat, High vis roof, Air conditioning, 520 & 420 tyres at 98% tread left, 150 hours.

Powershift transmission, Rear linkage with draw1000PTO, 4 rear spools, 3 position swinging draw bar, 223 l/min hydraulic pump, 16 idler weights & 18 track frame weights, 30” extreme Ag tracks, Auto guide ready, Comfort pack, 1593 hours.

10022591 £96,850 W

30022485 £56,500 F

30022571 £43,500 F

10021013 £62,750 W

10021722 £129,000 W

2017 MF 7715

2015 MF 9306

2015 Manitou MLT960

NEW Manitou MLA533

2012 Merlo P34.7 Turbo farmer

Warranty until 4000 hours or March 2021, Fully linkserviced, Profi plus, 50kph road speed, Front link age & PTO, 152 l/min hydraulic pump, Standard EGNOS Trimble, VRA & Section control, 710 & 600 Trelleborgs tyres with 85% tread left, 2157 hours.

Warranty until 2000 hours or July 2020, Dyna 6, 50kph road speed, Efficient spec, Full suspension, Joystick, 4 rear spools, Air & hydraulic brakes, 650 & 540 Michelin tyres with 70% tread left, 1131 hours.

20021514 £58,500 T

Hydraulic top link, Wheel weights, 9300 hours, Front PTO, Front links, 600/65 R34 650/85 R38.

6 metre, 3.0 tonne, Hydrostatic transmission, MF tool carrier, Air con, Air seat, 4 function joystick with proportional hydraulic control, 405/70R20 tyres with 40% tread left, 2022 hours.

20021783 £32,500 T

Email: tyres@farol.co.uk

9 metre, 6.0 tonne, CVT transmission, 180 l/m LSU hydraulics, Bluetooth, Manitou headstock, Air seat, Boom suspension, Xenon work lights, Semi auto wheel alignment, Adjustable continuous hydraulics, 500 tyres with 70% tread left, 972 hours.

30021988 £62,000 W

2019 Valtra N134V

2015 Challenger MT775E

2018Fendt718

Stock machines available, Hydrostatic transmission, 143 horse power, 40kph road speed, JSM joystick, With & without PUH, Boom suspension, Load sensing pump 156 l/min, Electrics mirrors, Air seat with active suspension, New machines.

10021876 POA W

7 metre, 3.4 tonne, Hydrostatic, Hydraulic implement lock, Pick up hitch, Air con, 24” tyres with 50% tread left, Tidy machine, 2720 hourstyres with 50% tread left, 3498 hours.

30022224 £31,500 F

4x4 TYRES

Up to 17% cheaper than the competition!

Prices include VAT, new valves and old tyre disposal

Grabber AT3 255/55R20

£144

each Inc. VAT

Primacy 4 205/55R16

£76 Thame, Oxfordshire

01844 277699

Hungerford, Berkshire

01488 649150

each Inc. VAT

Hinckley, Leicestershire

01455 638970

Grabber AT3 255/55R19

£150

each Inc. VAT

Turanza ER300 205/55R16

£62

each Inc. VAT

Midhurst, West Sussex

01730 819989

218 www.farmads.co.uk January 2020

fg_class_jan_20.indd 218

12/12/2019 11:11

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268 69076

SPREADERS TRAILERS & TANKERS

The Independent Spreader Trailer & Tanker Specialists Specialists

Specialists

ECE

Specialists

SPREADER, TRAILER & TANKER HIRE

GYRAX 12t spreader

SAS (Marston) 18/20t Beet King trailer

Covered car transporter trailer

2017 STEWART GX18-23S grain trailer

2017 STEWART GX18-23S silage trailer

2012 STEWART GX15 15t 28’ ﬂat trailer with options

2019 DEMONSTRATION BROUGHAN 32’ hi-speed ﬂat trailer

2017 HI-SPEC demountable 6000 gallon tanker

STEWART demountable tri-axle chassis, air susp

EDENHALL demountable beet chaser

NEW 2019 BEETKING Hi Speed Trailer

2017 TRAMSPREAD 6m dribble bar attachment

1998 GRIFFITHS 14t grain trailer

NEW 2019 HI-SPEC 4000 gallon TD-S tanker

2011 STEWART low loader 15t

2012 STEWART 26’ cattle ﬂoat/ trailer

2009 BUNNING Lowlander 150HD Mk2 widebody augers

STRAUTMANN VS 12 TD spreader with spinners

2013 ECE Fieldmaster 1200 spreader

2014 BUNNING Lowlander 150HD HBD spinner deck & weigh cells

WANTED – TRAILERS & ALL MODELS BUNNING SPREADERS, 4000 GALLON TANKERS

Visit our website for further photos and details

Contact Alan 01263 861500 • 07887 722978 • email: alan@sas-agri.uk

www.sasspreaders.co.uk

Buy and sell online — www.farmads.co.uk

2013 MAJOR 3500 gallon tanker

OTHER SPREADERS & TRAILERS COMING IN – Contact us for details y A very Happ to s ma st ri Ch omers all our cust

January 2020 www.farmads.co.uk 219

fg_class_jan_20.indd 219

12/12/2019 11:12

SMALL pig/chicken feed hoppers. £5 each. G Meadows Tel 07951 111182/01728 660577 (Suffolk) TEN black Hereford bulling heifers, 18 months, also 5 British Blue bulling heifers, 18 months, all well grown. L Smith Tel 01844 347564/07889 187515 (Bucks)

GLEBE FARM HEDGING

ARMADILLO ARC

The Hedging Specialists

28-69312

Insulated twin skin Increased yield Flip up plastic fender

Tel/Fax: 01206 323200 Email: hedge-plants@btconnect.com Website: www.glebefarmhedging.co.uk

NATIONWIDE DELIVERY

ARBO-CUT saw head with 36" blade, 2000, to ﬁt Bomford Falcon or Hawk with 6m reach, good condition, can be put straight to work. POA K Hewitt Tel 01427 884541/07970 483204 (Notts) BRACKET to ﬁt MF2640/80, etc, for McConnel Hyreach hedge cutter & also for County 6600, etc. POA. D Leigh Tel 07502 661861 (Northants)

Weekly Prime cattle, sheep & store cattle sales Weekly Poultry sales Pedigree Livestock Sales Farm Sales and Valuations Fortnightly sale of Pigs Annual rare breed sale Deadweight Cattle sales Straw and Fodder Sales

Serving farmers across the South of England For all your irrigation requirements

BULK FEEDERS FEED UK SILOS

01243 792323

INDIAN Runner ducks, 2019 hatched, fawn & white males & a few females available, good free range stock. S Ramsey Tel 01653 628366 (N Yorks) FODDER beet for sale, all loads put through cleaner, please call for more info. C Cornish Tel 07880 976137 (Suffolk) FEED & malting barley for sale. Ring for prices. K Ollett Tel 01359 270047/07753 859882 (Suffolk) WOULD anyone like to borrow a Charolais bull for winter? R Everett Tel 07963 798391 (Suffolk)

PEDIGREE Dexter heifers (2), black, polled, non-short, one 11 months, one 10 months. £150 each. L Beckwith Tel 07932 991223 (Essex)

INDIAN Runner Ducks, fawn & white, 2019 hatch, ducks & drakes available, healthy free range ducks. S Ramsey Tel 01653 628366 (N Yorks)

VACCAR cluster ﬂush, 12 units, full working order. D Seymour Tel 07850 292743 (Bucks) CHAROLAIS bulls, excellent pedigrees & temperaments, ready to work now, visitors welcome by appointment, Wissington Charolais. J Rix Tel 07850 796057/07500 904462/01206 262133 (Essex)

FEEDER bin 14t. £200. G Meadows Tel 07951 111182/01728 660577 (Suffolk)

WANTED & FOR SALE

4 x 12t Roxell 8 Collinson side discharge 18t Other silos available

07879 402246 01948 710662

THREE line hand reel posts (2). £10 each; Superlite poly stakes (50). £55; set 3 line anchor post (2). £12 each. R Brunning Tel 01638 532307 (Suffolk) BITTERN Herefords, top quality in calf heifers from our High Health CHeCS accredited herd, TB 4yr testing area. www. bitternherefords.co.uk. C Blaxell Tel 07768 171979 (Norfolk)

GATERIDGE Aberdeen Angus pedigree bulls, Farm Assured, SAC Health Scheme closed herd, ready to go to work. A Thompson Tel 07836 246392 (Northants)

KUHN Jeantil Primor mounted bale feeder/bedder, vgc, spreads any bale shape up to 40', cab controls.£3,750+VAT. R Lane Tel 07831 615912 (Cambs)

Barry Horne

MAJOR PTO saw bench, 1yr old, only used once. D Seymour Tel 07850 292743 (Bucks) BOMFORD B49XS linkage mounted hedge cutter, 5m reach, 125L/min 64hp, 5’ head with comp ﬂails, R/H cut, cable controls, paintwork poor/tatty, but direct from work. £2,650+VAT. GDO Howell Tel 07903 089391 & 01728 723683(T) (Suffolk)

01664 562971

www.meltonmowbraymarket.co.uk

SUFFOLK Sheep Society ﬂock books, years 1986–1994 inclusive. £100. M Ede Tel 07971 629039 (Derbys)

Briggs Irrigation main distributor

GRAZING for sheep required, Surrey/ Kent area. A Lawrie Tel 07771 818554 (Kent)

RITCHIE galvanised reversible muck scraper, very good order. £300. J Staight Tel 07761 631549 (Essex)

Scalford Road, Melton Mowbray, Leicestershire, LE13 1JY

Mobile UV treatment units

LAND/PROPERTY

www.enegis.co.uk

28-68667

TWO plate coolers & Fullwood stallwork for 30/30 milking parlour. D Seymour Tel 07850 292743 (Bucks)

LIVESTOCK

TWOSE 460R hedge trimmer, good condition, used this season. £2,500+VAT ono. B Estlick Tel 01872 273104 (Cornwall)

01789 205132

28-68963

HEDGING & FORESTRY

Tub Grinders to mill straw, hay and fibrous products. From 5mm to 50mm chop length. 4 sizes of machine available.

01353 862 044

IRRIGATION/ DRAINAGE SCAG Sabre Tooth Tiger, 942hrs, 5' deck, pulverises & spits out anything! Daihatsu 3 cylinder diesel, runs but needs rebuild or replacement, otherwise very good. £995+VAT ono. R Maundrell Tel 07785 568800/01527 854834 (Warks)

Haybuster GALEBREAKER bayscreen 4m wide by 1.5m high (12), 4.6m wide by 1.5m high (3), 4.6m wide by 2m high (1), 4.6m wide by 1m high (4), very good condition, only used for 2 winters. £2,000+VAT ono. R King Tel 07929 424474 (Notts)

www.contentedproducts.co.uk

24-68969

NIEMEYER HR451/DH 4 rotor tedder, ready to go to work, viewing welcome, get in touch for more pictures & information, west of Worcester, delivery available. £2,200 no VAT. J Wilson Tel 07528 090031 (Worcs)

Over 100 varieties of top quality hedge plants and young trees. For a catalogue, advice or a competitive quote, contact Glebe Farm Hedging Langham, Essex CO4 5PP

LAVENDER Pekin pullets, well bred. £20 each. R Hopkinson Tel 07976 424263 (Lincs)

28-69328

JAPA 385Pro & Rabaud log deck, working order, can be seen working, near Newmarket. £8,500+VAT. A Bramley Tel 07720 511098 (Cambs)

Vis to it ou see r w vid ebs eo ite s

RECO Ferri 2.7m ﬂail, new blades, hydraulic rear opening door, with full width roller & wheels. £2,250. S Bartle Tel 07884 238552 (Notts) KUHN GMD 600 disc mower, spares or repair, had £500 spent on the bed last year, new PTO guard in 2017 540 PTO, hydraulic folding, there is a crack across the last bearing in the bed, meaning the last disc does not turn. 8'6" cut. Offers. F Johnson Tel 01507 450203 (Lincs)

r de rin bg – l tu USA er ina he ov rig m t en ars e o ro ov ye Th f pr 50

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

GRASS MACHINERY (cont)

LUCAS mounted straw chopper, working order. £2,500. C Goater Tel 07979 556169 (Hants)

DOUBLE sided hay rack on wheels, length 8'. £120. R Brunning Tel 01638 532307 (Suffolk) QUANTITY Hampshire wet feeding system pumps & motors, all good order when removed a year ago, a good way to beat the next breakdown! J Staight Tel 07761 631549 (Essex)

FULLWOOD 24 troughs, as new, universal. D Seymour Tel 07850 292743 (Bucks) FODDER beet, harvested & ready for collection from Northampton, haulage can be arranged, ideal for your cattle/ sheep. R Arrowsmith Tel 07850 150181/01604 890271 (Northants) STOCK feed potatoes in approx 25kg bags, available for collection from near Swaffham. T Saunders Tel 07752 040480 (Norfolk)

220 www.farmads.co.uk January 2020

fg_class_jan_20 extra ad.indd 220

13/12/2019 13:16

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

bp combine harvesters ltd Combine & Harvesting Specialists

“Anything Agricultural”

tel: 01945 580002 mobile: 07554 355010 email: info@bpcombineharvesters.co.uk bpcombineharvesters.co.uk

USED COMBINES FOR SALE

£24,000

£55,000 New Holland BB9090 Plus 2014 46,000 bales excellent condition

MASCHIO DM 4000 POWER HARROW full set of new blades

REEKIE CLEANFLOW 2000 POTATO HARVESTER Dahlman rollers, picking off, steering axle

2014 BAILEY TB16 SILAGE TRAILER hyd door, sprung d/bar, 560/60x22.5 wheels, rear d/bar

NEW BAILEY 15T 10M BEAVERTAIL LOW LOADER air, hyd ramps, s/drawbar, 435/50x1.5 wheels

2009 JOHN DEERE DIESEL GATOR 3459hrs, roof, front & rear screens

BAILEY TB14 TRAILER sprung drawbar, hyd door, window, super singles, grain chute

2016 BAILEY TB16 TRAILER air brakes, hyd door, sprung d/bar, 560/60x22.5 wheels

JOHN DEERE 3050 POWER SYNCHRON TRACTOR front weights

2014 JD 6170R TRACTOR TLS, 50K, autotrac ready, Starfire 3000, touch screen Command centre, 650x42 & 540x30

£155,000 Claas Lexion 770TT 2014 1583/1298hrs excellent condition

£57,000 New Holland BB1290 2015 42,000 bales excellent condition

2015 BAILEY 18T BEETEAPER air brakes, 560/60x22.5 floatations, rollover sheet

£14,000 Massey Ferguson 1840 2013 in line baler excellent condition

All prices are plus VAT

B W M ACK (Machinery) LTD. New Machines

CLAAS Arion 650 CIS+ 50kph, Proactive front axle, air brakes ............................................................POA CLAAS Scorpion 741 Vari Power telehandler, 4.1t, 7m, demonstrator ...................................................POA JPM low loader trailer, 24’ long, loading skids, sprung drawbar, air & hydraulic brakes .................. £10,950 ALPEGO TR 46-280 front/rear, 2.8m flail mower, hydraulic offset headstock .................................... £6,500 ALPEGO TL 33-250 verge mower, 2.25m, hydraulic offset, wide angle PTO ..................................... £6,500 ALPEGO TL 33-200 verge mower, 2m, hydraulic offset, wide angle PTO .......................................... £6,200 ALPEGO RK 300 Rapido 3m power harrow c/w Twin Force quick fit tines packer roller, 3yr Driveline warranty...........................................................................................................................................POA ALPEGO/MORO Warrior 200 5 furrow (4+1) hyd variwidth plough hydraulic transport system ex demo.................................................................................................................................... £17,250 VICON RO-XL EDW 2800 weigh cell disc spreader ...............................................................................POA VICON RO-XL 2800 fertiliser spreader c/w Trimflow border spreading 12m to 48m spread width......... POA

2017 VOLVO ECR 88D 360 DEG DIGGER 1096hrs, rubber tracks, air con, blade, 3 buckets

68823

Used Equipment

2016 CASE PUMA 150 2014 MF 6616 DYNA-6 3350hrs, 50k, air, front & cab susp, 3505hrs, front & cab susp, fitted balance of 5yr, 3000hr warranty MF 956 loader, finger tip joystick control

2014 CLAAS Arion 640 Cebis 50K, 2700hrs suspended front axle, 4 spool valves, air brakes, 650x38 & 540x28 wheels, good condition................................................................................. £45,000 2016 CLAAS Axion 850 CIS 50K, 4500hrs, 4 spool valves, suspended cab, suspended front axle, air brakes good condition .......................................................................................................... £52,000 MERLO P40.7 telehandler, 2014, c/w 4t/7m, air con, boom suspension, air seat PUH ................... £29,000 MERLO TF 38.7 telehandler, 2015, 3300hrs, boom suspension, air con, new tyres, 3.8t, 7m boom, 40kph PUH............................................................................................................... £35,000 SUTON ELCS 80 rehandling bucket, Merlo brackets ........................................................................... £975 SUTON EHDG 2300 muck fork & grab, Merlo brackets .................................................................... £1,500 KONGSKILDE 3m Delta cultivator, 7 leg, levelling discs, large crumbler roller, good condition .......... £3,250 HARDI Commander 3200L sprayer, c/w 24m booms, triplet nozzles, steering drawbar .................... £8,500 HARDI NK 600L sprayer, 8 or 6m boom, triplet nozzles, electric on/off, foam blob markers, very little used ........................................................................................................................... £2,350 COUSINS Contour, 6.3m working width, hydraulic folding, plain 24” rims, good condition............... £4,900 COUSINS 5m double row Landpacker, good condition..................................................................... £6,500 COUSINS 2 leg heavy duty subsoiler, c/w depth wheels ................................................................. £1,200 COUSINS 9m Contour Cambridge rolls, 26” plain rims ................................................................... £6,000 KUHN DC401 4 leg subsoiler 3m with rear mounting brackets to fit rotary cultivator, good condition .. £4,000 SPEARHEAD Excel 645T reach mower, 1.2 metre head boot flails, Pro Pilot control, good condition £6,300 VADERSTAD Super Jumbo 6.3m rolls, hydraulic folding, 21” rims ................................................... £1,950 VICON ROXL 2800 EDW weigh cell fertiliser spreader, Trimflow border speading, 12–48m spread width, good condition.................................................................................................................. £6,750 BOMFORD 467 reach mower .......................................................................................................... £3,500 KW Chopper feeder bucket c/w Merlo brackets ............................................................................... £3,250 T&F 8t dropside trailer, hydraulic brakes, road lights ........................................................................ £1,500

2015 BAILEY 20T BEETEAPER air brakes, hyd door, sprung drawbar, Nokian 650/50x22.5 wheels

NEW SET OF 4 CEAT 560/60X22.5 10 stud floatation wheels & tyres

2016 JCB 527-58LC AGRI PLUS LOADALL 1771hrs, air con, pin & cone, low cab model

ARMSTRONG & HOLMES 12T X 25’ FLAT TRAILER springs, sprung drawbar, super singles

1995 SANDERSON 726 TELEPORTER 6242hrs, Sanderson carriage, good tyres

ARMSTRONG & HOLMES 7M HYD FOLDING HARROWS

SEE WEBSITE FOR MORE PICTURES & OTHER STOCK

Sales contacts

Paul Warner 07795 845308

T: 01366 324256/324311 E: pwarner@bwmack.co.uk Out of hours: 07795 845308 • www.bwmack.co.uk

68778

email: dasservices@btconnect.com website: dasanythingagricultural.co.uk

Brian Cornwell 07899 965066

Barroway Drove, Downham Market, Norfolk PE38 0AL

Buy and sell online — www.farmads.co.uk

New Holland TF76SL 2001, 2468/1975hrs 24’ header tidy

NEW BAILEY 15T FLAT DECK 33’ LOW LOADER air brakes, sprung drawbar, 435/50x19.5 wheels

69181

£45,000 New Holland CR980SL 2005, 3370/2634hrs 30’ header tidy

2014 KUBOTA L4100 HST 4WD TRACTOR 900hrs, turf tyres, roll frame, front weights

Main Dealer for TRAILERS

Dean: 07836 680004 Peter Scott: 07584 066866 Office: 01522 754733

January 2020 www.farmads.co.uk 221

fg_class_jan_20.indd 221

13/12/2019 09:55

J Murrell

01493 750999 info@jamesmurrell.co.uk Contract Farm Services

Agricultural Machinery Dealers

2013 MAN TGL7.150 268687kms, MOT 30/04/20, no curtains

NEW JPM 20T DUMP hyd gate, air, L/S, 10 stud, 560 ﬂotations

FENDT/TRELLEBORG 520/85R42 & 480/70R30 84” track

2010 MASSEY 6485 DYNA 6 2400hrs, f/links, mint

NEW 24’ JPM 19TLL hyd brakes, 900 wide ramps

2013 MAN TGL 7.150 BOX VAN 7.5t, 384605kms, MOT 31/03/20

NEW JPM FAST TOW 1000L BUNDED BOWSER twin pumps

4 POST PORTABLE WORKSHOP ROTARY VEHICLE LIFTS 28.8t capacity

SIMBA 6.6M DOUBLE PRESS cultivation tines, ﬂotation tyres

2014 JOHN DEERE 6190R 40K AUTOPOWER 3983hrs, 95% tyres

2012 JOHN DEERE 6190R 50K AUTOPOWER f/links, 6509hrs, 95% tyres

SWIFT LIFT EURO SLE140X RUBBER BELT ELEVATOR barn stored

MANITOU MLT 523T 3509hrs, hydrostatic drive, vgc

2016 TAKEUCHI TB216 1470hrs, Q hitch, 3 buckets

NEW STRIMECH PRO-AG MUCK FORK GRABS AND BUCKETS

2003 DEFENDER TD5 BESPOKE FULL REBUILD like new

£4,000

£5,000

£44,500

£16,000

in stock

£15,200

£4,800

£4,300

£4,500

£37,500

£6,500

£9,130

£49,000

4X TRI-AXLE STEP FRAME NEW JPM 16T MULTI PURPOSE HANOMAG 22C ARTICULATED BULK TIPPERS ramps, magic tail gate, LOADING SHOVEL steel suspension, HD bogies, full spec 12811hrs, very reliable £6,700 r/o sheet £14,000 £5,500 no VAT £5,000 each

£11,500

£24,000

2015 KUHN VKM 280 FLAIL MOWER hyd side shift, mint

NEW JPM 16T DUMP 10 stud, air, load sensing, hyd gate, LED

NEW JPM 28’ 19TLL hyd ﬂip over ramps, 10 stud, hyd/air & L/S

2015 LEMKEN RUBIN 12 DISC TILLAGE TRAIN, double packer, vgc

2010 DEFENDER TDCI PUMA COUNTY S/W BESPOKE REBUILD galv chassis

2014 LARRINGTON MAJESTIC 18-20T 600/50R22.5 ﬂoats, full spec

£4,500

£28,000

£12,000

£32,000

£12,980

For more pictures and further details of our stock visit our website www.jmurrell.co.uk

We are JPM Trailers’ East Anglia Dealer J Murrell • Willow Farm • Norwich Road • South Burlingham • Norwich • Norfolk NR13 4EZ

07770 692891

£20,000

All prices + VAT

68822

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Norfolk Farmers

222 www.farmads.co.uk January 2020

fg_class_jan_20.indd 222

12/12/2019 11:16

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

New Holland TX68 SL 24ft, 2724 DH ............................£26,500 Ziegler rape header extension to fit above ........................£3,500 JCB 531-70, 2011, 3453hrs, 90% tyres, v tidy ..............£25,500 Ford 5000 pre Force, power steering, F reg, v tidy ...........£5,750 1970 Ford 4000 Force VT refurbished .................................. POA Ford 3000 Pre Force in original condition ....... Offers over £4,750 Ford 7840x4 SLE K reg, one owner, 7846hrs, v good ....£12,500 Roadless 95, ex shunter Felixstowe docks, lift top, air brakes ........................................................................£8,500 Roadless E27, P/P half track, Lincs tractor, in running order .................................................................. POA Ferguson 20, petrol, resprayed, new tyres, ready to rally ...................................................................£1,950 Carrier 4m mounted spring tine drill, large hopper ...........£2,850 Claydon SR 3.5m mounted tine drill VT..........................£10,500

Kuhn power harrow HR4003 c/w maxi packer .................£7,950 Cousins 4m trailed 7 leg h/d, V-Form c/w raiser rings plus Stocks rape drill, plus Opico liquid fert tank variable ..... POA Cousins V Form 5 leg, 2 row, razor ring packer, 2007, width 3.25m, vgc ............................................................£7,500 Browns GB900 loader, ex Ford 5000/6600/7600 + 10 Series ...........................................................................£850 Farmhand F12 loader to fit Ford 500/6600 .........................£750 Ford front end power loader DA to fit Ford 4000/5000/ 7600..................................................................................£475 Dowdeswell model 90 rotovator, 60” working width .........£1,850 Turner Yeoman of England Mk3........................................... POA Sumo 4 bed former, 80cm bed with subsoiler legs & belt markers, hyd fold ............................................................£4,250 Trailed H/D chain harrows, 12’ wide ..................................£475 AS Marston 14t, c/w hyd door, sprung drawbar ...............£6,550

Warwick 14t, hyd door, V/T ............................................£8,250 AS Marston Ace 10t std door ..........................................£2,775 Ifor Williams t/a 16’ LM166 c/w side mounted HIAB crane .................................................................................. POA AS Marston 12t mono grain trailer on super singles .........£3,850 Shoot trailer 2 single axle sprung 10’ x 6’ ..........................Offers MF30 4m grain only disc, V/T, choice .........................from £850 JCB grain bucket Q Fit 7’6” wide 60 C/F .............................£750 Chillton grain bucket, tip toe, Euro 8 fittings ........................£950 Land Rover 90, 2004, hard top, c/w rear bench seats, side windows, alloy wheels, 69,000 miles, MOT, black......................................................................Priced to sell Land Rover 90 hard top TD5, 54 reg, 83,000 miles, very original, green, MOT .......................................Priced to sell Land Rover Discovery TD5, Silver, 2004............................Offers

69254

STAMFORD STAMF ORD TRACTORS

Mill Farm, Wilsthorpe, Stamford, Lincs PE9 4PE Email: stamfordtractors@btconnect.com Contact: 01778 560111 • Mobile 07860 336044 • Fax: 01778 560160

All prices are plus VAT

Andrew H Gemmill Humbaur 20’ trailer

Plant trailer

£4,600

£600 Krone EasyCut R320CVQ (2013)

Krone EasyCut R320CVQ (2008)

£7,795

Tescos van body

Concrete pipe 900mm (7)

Concrete gullies & lids (10)

£400

£ 200 each

£120 each Krone Comprima F155XC (2012)

£7,495

Krone EasyCut R280CV (2011)

£16,495 Hesston 4700 baler

£4,700

Renault 113 12 4x2, 1982, 120hp, 2 owners been on farm for 9 years

Thwaites dumper

£3,800

£2,500

All prices+VAT

01702 202930 • 07767 891328 andrewhgemmill@hotmail.co.uk

£6,900

Sales, Servicing & Spare Parts t: 01872 540664 m: 07770 472205

www.agprowseltd.co.uk

69405

Esma ES150T (2018)

Lower Tolcarne, St Allen, Truro TR4 9QX All prices +VAT

£33,500

Tel 01652 Kevin mob 07796 Michael mob 07850

Tractors

Buy and sell online — www.farmads.co.uk

MF baler

69208

655777 957735 828639

Fountain House, 111 Scawby Road, Scawby Brook, Brigg, N Lincs DN20 9JX

17 reg MF 7718 4x4 Dyna 6 Efﬁcient 50k front linkage 1600hrs 16 reg MF 7718 4x4 Dyna 6 50k air brakes 900hrs 64 reg MF 7620 4x4 Dyna 6 FS CS 40K 2330hrs 05 reg MF 8480 4x4 FS CS Dyna VT 50K 5800hrs 06 reg MF 8480 4x4 Dyna VT 6800hrs 13 reg MF 7618 4x4 Dyna 6 50k CS FS FL 2200hrs 12 reg MF 6499 4x4 Dyna 6 50K FL 5700 FS CS 08 reg MF 6499 4x4 FS CS 6800hrs new shape 04 reg MF 6499 4x4 FS CS Dyna 8100hrs 57 reg MF 6490 4x4 FS CS 50k 7400hrs 05 reg MF 6490 4x4 5300hrs

08 reg MF 6490 4x4 CS 2800hrs mint condition 07 reg MF 6490 4x4 FS CS 7400hrs 04 reg MF 6490 4x4 Dyna 4 7000hrs 04 reg MF 6480 4x4 CS 7250hrs 11 reg MF 6475 4x4 CS 5000hrs 03 reg MF 6290 4x4 FL PTO 8000hrs W reg MF 6255 4x4 new MX loader 5800hrs 11 reg MF 5480 4x4 FS CS 2600hrs 09 reg MF 5475 4x4 CS Dyna 4 5800hrs M reg MF 3075 4x4 6700hrs Dyna A reg MF 698 4x4 Multi Power 5000hrs

email: kptractors1@outlook.com

fax: 01652 651476

02 reg JD 6810 4x4 TLS Powerquad 8400hrs N reg Cat Challenger 35 10,000hrs 09 reg Case 95 JXU 4x4 with power loader 4in1 bucket 5900hrs 17 reg Manitou 733/105 290hrs 18 reg JCB 535/95 telehandler 4x4 joystick AC 922hrs 2 year JCB warranty N reg Ford 7840 SLE 4x4 8000hrs E reg Ford 7610 SQ 4x4 with Quicke loader A reg Ford 5610 2x4 J reg Ford 5610 AP cab 2x4 3500hrs Generation 3 2015 JPM 15t dump trailer 68773

www.kptractors.co.uk January 2020 www.farmads.co.uk 223

fg_class_jan_20.indd 223

13/12/2019 12:54

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

MANNS

Alastair McCallum, Used Machinery Manager Tel: 01284 777700 Mob: 07717 861815 email: a.mccallum@claas-manns.co.uk

claas-manns.co.uk

CLAAS ARION 650 C-MATIC £63,000 2015 50k, 184hp, 1850hrs, 540/65R28 fronts, 650/65R38 rears CT1587

CLAAS AXION 830 £48,950 2015 50k, 4700hrs, 540/65R30 fronts, 650/65R42 rears CT1695

CLAAS ARION 640 £25,500 2008 50k, 180hp, 5950hrs, 420/85R28 fronts, 520/85R38 rears CT1626

CLAAS AXOS 340 CX COMFORT £26,000 2012 40k, 2995hrs, 440/65R28 fronts, 540/65 R38 rears CT1697

CLAAS ARION 420 PANORAMIC £35,000 2016 40k, 100hp, 4000hrs, 340/85R28 fronts, 420/85R38 rears CT1645

CLAAS XERION 3800 £80,000 2011 50k, 380hp, 5200hrs, 800/70R38 fronts, 800/70R38 rears CT1717

CLAAS ARION 650 CEBIS £41,000 2013 50k, 184hp, 5844hrs, 540/65 R28 fronts, 650/65/R38 rears CT1589

CLAAS ARION 650 CEBIS £44,000 2013 50k, 185hp, 5300hrs, 540/65R28 fronts, 650/65R38 rears CT1607

CLAAS ATOS 340 £36,000 2018 40k, 102hp, 240hrs, 380/85 R24 fronts, 420/85 R34 rears CT1616

CLAAS AXION 830 CEBIS 50K £62,000 2015 50k, 235hp, 4140hrs, 540/65 R30 fronts, 650/65 R42 rears CT1685

CLAAS ARION 420 £35,500 2014 40k, 120hp, 1600hrs, 13.6 R28 fronts, 16.9 R38 rears CT1754

CLAAS ARION 410 £52,980 2018 40k, 90hphp, 208hrs, 320/85 R24 fronts, 420/85 R34 rears CT1535

JOHN DEERE 7430 AUTOPOWR £31,500 2010 50k, 175hp, 9000hrs, 420/85R30 fronts, 520/85R42 rears JD0346

JOHN DEERE 6400 £13,250 1998 40k, 100hp, 10600hrs, 14.9 R24 fronts, 16.9 R38 rears JD0356

JOHN DEERE 7530 AUTOPOWR £33,500 2011 50k, 204hp, 10457hrs, 600/65 R28 fronts, 710/70 R38 rears JD0359

JOHN DEERE 6150R £46,000 2013 50k, 6170hrs, 420/85R28 fronts, 480/80R42 rears JD0360

MASSEY FERGUSON 6480 DYNA 6 £20,000 2006 40k, 145hp, 7380hrs, 540/65R28 fronts, 650/65R38 rears MF0269

MASSEY FERGUSON 7490 DYNA VT £28,500 2005 50k, 3405hrs, 480/70R28 fronts, 580/70R38 rears MF0274

CHALLENGER 775 E STEALTH £110,000 2014 40k, 400hp, 4336hrs ZZ2240

CASE MAXXUM 140 £25,000 2011 40k, 5230hrs, 420 R28 fronts, 600 R38 rears CI019

CLAAS LEXION 770 TT T4I £152,000 2014 10.5m Vario, 1338 drum hrs CL2238

CLAAS LEXION 760 TT £129,000 2013 10.5m Vario, 1378 drum hrs, TT fronts, 600/65 rears CL2174

CLAAS LEXION 570+ £90,000 2009 7.5m Vario, 1885 drum hrs, 900/60R32 fronts, 600/65R28 rears CL2669

CLAAS LEXION 600 TT £83,000 2008 1050 m Vario, 2362 drum hrs, 500/85R24 rears CL2533

CLAAS LEXION 570 £82,000 2008 7.5m Vario, 2000 drum hrs

CLAAS LEXION 570 C £80,000 2009 7.5m Vario, 1900 drum hrs, 800/65R32 fronts CL2368

CLAAS LEXION 520 £80,000 2010 6m Vario, 1221 drum hrs, 800/65 R32 fronts CL2594

HORSCH JOKER 12 RT 2015 12m

HORSCH CO6 £12,000 2001 6m, Duett coulters, PTO hydraulic pump HO0243

HERBST 24’ – 19T £7,500 2015 215/75 R17.5 twins, sprung drawbar, air & hyd brakes ZZ2198

£55,000 HO0245

CL2432

68903

224 www.farmads.co.uk January 2020

fg_class_jan_20.indd 224

12/12/2019 11:22

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268 MATERIALS HANDLERS

STRAW BUSTER F1050

FORKLIFT/ TELEHANDLER MAN CAGE

31-68835

PR NE OD W UC T

PTO TUB GRINDER

28-69118

LIVESTOCK (cont)

Stand No 19.620

Process your straw with the

Straw Buster F1050

For the perfect chop length

TWO steel bins, we used them to collect ground cereals from the mill, hold about 3t ground wheat. J Staight Tel 07761 631549 (Essex)

01400 272475

Tel Email welmacuk@btconnect.com

www.welmacuk.co.uk

Snow Plough THREE pedigree Red Aberdeen Angus bulls from the Wood Cottage Herd, 21+ months of age, Elite Health status, TB4, quiet & easy to handle. S Pilch Tel 07758 841008/01379 741793 (Norfolk)

KW Root Chopper

WOPA crush, back/front winches, always been kept inside, in good condition. D Seymour Tel 07850 292743 (Bucks)

MACHINERY

FGM

£420+VAT 01531 820545 www.euroquip.net • sales@euroquip.net

from £4,400 + VAT & Del Snow Plough 2.7–3 metres working width, 2 years warranty

01386 49155

29-68984 Norfolk Mobile 07775 741720

MACHINERY

Call Bob on 07836 721609 www.kwfs.co.uk 28-69276

PORTEQUIP double sided bull feeder, 10', as new, delivery possible. £1,265 ono. R Edwards Tel 07967 828571 (Hereford)

to Merry Christmas all my customers

Weedwiper spares in stock all + VAT All + VAT unless otherwise stated

TEAGLE Tomahawk 8100 straw spreader, with swivel chute, bluetooth control, extension on back door, extension on chute, bought in 2017, very good condition, like new. £10,000+VAT ono. R King Tel 07929 424474 (Notts) RAPPA hand reel with orange polywire, 600m length, two sets of 3 reels available, together with 3 line anchor post. £112/set. R Brunning Tel 01638 532307 (Suffolk) ELECTRIC Shepherd ESB 200 battery fence unit. £35. R Brunning Tel 01638 532307 (Suffolk) SPEEDRITE AN90 fence energiser. £60. R Brunning Tel 01638 532307 (Suffolk) 10/12-TONNE galvanised feed bin, watertight condition. £150. T Catchpole Tel 01508 482450 (Norfolk)

HEREFORD polled bulls, 12–18 months old, from a TB4 area, accredited for IBR, BVD & Johnes level 1, very good temperament & great conformation. R Fowell Tel 07947 126053 (Norfolk)

AG Dispenser 175 Xtra, 2012, had very little use, sawdust only, Mero bolt on brackets. £2,250. L Rich Tel 07774 112211 (Glos) EIGHT non-short Dexter cows, due to calve mid January–February, plus Dexter bull, for sale due to retirement. J Lloyd Tel 01708 227050/07854 046692 (Essex) SPE 2000 fence energiser. £80. R Brunning Tel 01638 532307 (Suffolk)

G. BROWN

USED MACHINERY SALES IH 484 2wd tractor, W reg, clean & tidy, c/w loader, power bucket ........................ £4,400 Tanco loader to fit IH 454–484, c/w power bucket .................... £850 Quicke loader to fit IH 74–84 Series tractor ............................. from £750 Front end loader to fit MF 35–135 tractors, c/w power bucket, valves & fittings ....................... £395 Tipping skip, fits forklift or teleporter ................................. £295 Set of 10 IH weights, Pt No 383392RI, c/w frame ...... £400 Votex 12’ pasture topper c/w end tow kit, new blades .................. £895 Votex topper – breaking for spares Pair of grassland wheels & tyres, 23.1x26 ................................... £600 All prices plus VAT

29-68965

Tel: 01945 700142 or 07774 676440

GRAYS snow plough, to ﬁt front loader or 3 point linkage. £575. D Leigh Tel 07502 661861 (Northants)

JCB 520-4 telescopic loadall with forks, grain & rubble buckets, 3900hrs, very well looked after, kept in the dry, owned for 15yrs, new rear tyres, 30% fronts. £5,000+VAT ono. G Gibson Tel 07770 954301 (Cambs)

BUNCE front mounted hydraulic snow plough, 10' wide, angle adjustable, including mounting frame. £800 ono. J Stiles Tel 07768 437800/01793 731620 (Wilts)

Good used Secondhand Tractors of most makes always for sale

2004 Caterpillar DP25N forklift truck, 2797hrs, 4.8m triple mast (can work with low headroom), 1200mm forks with sideshift, Thorough Examination Certiﬁcate to November 2020, Lakenheath. £6,400. R Downs Tel 07966 551861 (Suffolk) LAWRENCE Edwards sheargrab No8, Quicke brackets, gwo. J Adams Tel 07812 367009 (Worcs)

Also Machinery and Implements: Spares, Wheels, Tyres, Loaders, Cabs and Hitches

29-68962

NEW Washing & Chopping BUTLEY Herefords registered pedigree bulls & females, quiet & easily handled, all bulls halter trained & guaranteed under Hereford Society rules, TB4 area. DC Smith & Sons Tel 07971 694912/07885 594143 (Suffolk)

Micron 6m tractor, mounted weedwiper, ex hire, AS NEW ........................... £2,600 Micron 6m tractor, 2019, new grey control box with on/off ................................. £3,500 Reekie 2 row potato planter, tipping hopper, covering hood....................... £950 Standen FM2 front mounted potato tops pulveriser, c/w cross conveyor ............ £1,400 Newage Stamford 3p/l PTO generator, 415/240 volts, 15KVA............................... £1,200 Quantock 2.5m slitter/ aerator, NEW, for sale or hire ................... £2,360 Micron 6m weedwipers, for hire for Charlock, in rapefields.....POA JJ Wright history books ......... £15

ATKIN FARM MACHINERY Norwich Road, Dereham

01362 692104/637332 www.atkin-farm-machinery.co.uk

BUNCE front snow plough, to ﬁt on brackets. £955. D Leigh Tel 07502 661861 (Northants)

Buy and sell online — www.farmads.co.uk

PEDIGREE polled Hereford bulls, top quality genetics from our High Health CHeCS accredited herd, TB4 area, ready for work now. www.bitternherefords. co.uk C Blaxell Tel 07768 171979 (Norfolk)

KUHN Primor 5570 spreader/ feeder, hydraulic r/door, chain/ slat floor feeds to bale rotor & flywheel blower, handles all bale sizes, electric in cab controls, can be seen working. £4,500+VAT ono. J Brook Tel 07957 846865 (Lincs)

29-64897

Come see us at

PEDIGREE Simmental bull, 2yr old, home bred, High Health/Farm Assured, excellent temperament, from TB free closed herd. POA. C Goater Tel 07979 556169 (Hants)

HEAVY duty fork, long KV hardened tines, very strong blacksmith made, currently on pin & cone brackets, made to last, very solid, no thin metal, only been used for carrying silage/straw bales, for sale due to retirement. W Thompson Tel 07800 866337 (Dorset) SANDERSON TL7 c/w bucket, grab & tines, good order. £14,995 ono. R Hopkinson Tel 07976 424263 (Lincs)

TRAILED 3 point linkage tool carrier, 2 double & 1 single acting spools, c/w 2t twin outlet Accord seed tank including metering units, would suit a wide range of projects, well built by a local engineer, 500-65/22.5 tyres. £1,200 ono. J Stanley Tel 07719 703897/07974 739932 (Leics)

SANDERSON 725c teleporter, excellent condition, 4594hrs, has been on arable farm since new. £8,000+VAT. W Grantham Tel 07977 140444 (Lincs)

January 2020 www.farmads.co.uk 225

fg_class_jan_20.indd 225

13/12/2019 10:25

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

01223 870016

CAMBRIDGE

FARM MACHINERY

www.cambridgefarmmachinery.co.uk

RDA 400S RDA 600S

RST 830 RDA 800S

CR 650CB CR 500CB

Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Väderstad Opico Rapidlift Rapidlift Rapidlift He-Va Köckerling Köckerling Köckerling Köckerling

RS 1020

RD 300S Drill RD 400F Drill 2001 RD 600F Drill System Disc or System Tine Set of System Discs to fit RD 600F drill RDA 400S Drill 2003 RDA 400S Drill 2010 RDA 400S Drill 2015 Refurbished RDA 600S Drill 2002 RDA 600S Drill 2018 Ex Demo RDA 600S Drill 2016 450ha RDA 600S Drill 2010 RDA 600S Drill 2015 RDA 800S Drill 2002 RDA 800S Drill 2004 RDA 800S Drill 2008 RDA 800S Drill 2013 RDA 800S Drill 2018 RST 450 Twin Press RST 630 Twin Press Ex Demo RST 630 Twin Press RST 830 Twin Press TopDown TD300 TopDown TD400 TopDown TD500 TopDown TD600 TopDown TD700 NZA 600 6m Cultivator Ex Demo Rear Drawbar to fit Top Down Carrier CR500 CB Carrier Tines & Crossboard to fit CR500 Carrier CR650CB Ex Demo Variocast Electronic RRP £7,122 our price £4,750 RL400 Cultivating Solutions RL 600 to fit a Väderstad 6m Drill Demo Unit RL 600 to fit a Väderstad 6m Drill Second Hand Combi Disc Roller Contour RRP £43,000 Special Offer £30,000 Allrounder 6m Ex Demo Vario 4.8m Ex Demo Rebell 6m Classic Compact Disc Harrow Ex Demo Vetor 6.2m ex demo Ex Demo

68801

RST 330 Church Road, Hauxton, Cambridge CB22 5HS

cfm.sales@cambridgefarmmachinery.co.uk

Main Dealer & Service Centre

Refurbished VÄDERSTAD Machinery Available

226 www.farmads.co.uk January 2020

fg_class_jan_20.indd 226

12/12/2019 13:02

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268 CMYK: C0 M100 Y 100 K 0 or Pantone 032 Red Kings LangleyRGB: R 230 G 0 B 4

Tel: 01923 265211 Green : kingslangley@oliverlandpower.co.uk

LANDPOWER

www.oliverlandpower.co.uk

Luton Tel: 01582 727111 luton@oliverlandpower.co.uk

Pantone: 347 RGB: R 0 G 157 B 87

Tingewick Tel: 01280 848494 tingewick@oliverlandpower.co.uk

AGRICULTURAL MACHINERY | EVENT VEHICLE HIRE | GROUNDCARE MACHINERY | COMMERCIAL VEHICLES | COUNTRY STORE Brown : Pantone: 4705 RGB: R 120 G 46 B 28

2017 JCB 403 137hrs, Euro carriage, heater, 20kph, 12v electrics, pallet tines, wide tyres, top spec, other attachments available POA £22,000

2013 JCB 531-70 5306hrs, 145hp 40kph, 6-speed powershift, SRS, hyd locking Q-Fit carriage & forks, PUH, T4i, Datatag, LiveLink £34,950

2018 JCB 526-56 720hrs, air con, Smooth Ride system, tool carrier, carriage & forks

NEW CHIEFTAIN HP20 air load sensing, high speed, Hardox, 20t, LED lights, camera

2014 ISUZU D-MAX 2.5 UTAH AUTO blue, Aeroklas lid, tow bar & electrics, leather seats, sat nav, full service history, 51,000 miles £12,995

2018 EX DEMO ISUZU D-MAX 1.9 BLADE AUTO Obsidian grey, colour coded Truckman canopy, tow bar & electrics, leather seats 12,000 miles £23,500

2017 JCB FASTRAC 4220 60kph, BKT 600 tyres, front linkage Field Pro package, LED lights, leather seat, 2940hrs £86,500

NEW JCB 560-80 AGRI PLUS 125hp, 38kph, auto SRS, 6t lift, 8m lift height, 4 speed, seat mounted joystick, PUH, belly & roof guard £76,500

NEW CHIEFTAIN FT27 LOW LOADER 27t, high speed axles, hydraulic ramps, 900mm with control valve, tool box, sprung drawbar, parabolic suspension £15,850

£51,000

£22,000

2018 EX DEMO ISUZU D-MAX 1.9 UTAH AUTO Sapphire blue, colour coded Truckman canopy, tow bar & electrics, leather seats, climate control 9,500 miles £23,000 All prices plus VAT 68802

69145

RC SETCHFIELD LTD Grantham 01476 560784

Staveley 01246 475315 All prices subject to VAT

Hi-Spec Mix Max 18 diet feeder

£9,800

Merlo P40-7CS 64 reg, 4653hrs, air con, rear hitch, tyres 80%, Sanderson carriage

POA

JCB TM320S 14 reg, 5884hrs, PUH, Michelin tyres 85%

JCB 526-56 14 reg, 5187hrs, new tyres

Tym T503 2013 reg, 985hrs only

POA

Maschio DMP4000 power harrow hyd folding

Dowdswell DP120 Cat TH407C Agri MA-Delta 5 furrow plough 65 reg, 2916hrs, rear hitch, tyres 50%

£5,950

For more pictures and more stock visit

£2,950

POA

Fendt 720 2012, 8154hrs, f/linkage, guidance, Mich tyres

MF 7726 Dyna 6 2017, 1540hrs, guidance, f/linkage, 50k, airbrakes, Mich tyres

Vogel & Noot XMS 950 4 furrow plough

Chafer Mirage self propelled sprayer 2003, 3000L, 24m, c/w rowcrop & float tyres

POA

£2,950

Buy and sell online — www.farmads.co.uk

Oliver graphic swoosh Green 2019 JCB: FASTRAC EX DEMO Pantone: 347spec, 60kph, deck weight, auto Choice of 2, full steer ready, pack, RGB: R 0 Road G 157Performance B 87 Field Pro package, approx 200hrs POA

2019 JCB FASTRAC 4220 EX HIRE Choice of 2, full spec, 60kph, 600 tyres, front linkage, Field Pro, Road Performance pack, approx 600hrs £112,000

POA

www.setchfield.co.uk January 2020 www.farmads.co.uk 227

fg_class_jan_20.indd 227

12/12/2019 13:11

S NG G & IR RI IN A FE N REP OF TIO E W DI OS NO CON IC H R UL AI RA D HY

The Hangar • Oulton Street • Norfolk • NR11 6QZ • Ofﬁce 01603 558014

All + VAT

2016 2008 2006 2015

McCormick X6.430 , 130hp, 3900hrs – superb condition – very popular ..................£36,500 McCormick MC135, 6 cylinder, 4000hrs, suspension axle – really nice .....................£23,500 McCormick MTX150, air brakes, good tyres – a genuine tractor ................................£21,500 Deutz 5090 4wd with loader, 88hp – ideal for yard work only ....................................£19,750

New 27t low loader 27t payload, comm axles, side tool box, air & hydraulic brakes, hyd r/ramps, LED lights, s/d/bar, total body length 24’ £13,250

Ex hire 19t low loader 19t payload, sprung drawbar, 950mm deck height, hyd brakes, side tool boxes, LED light

20 gallon or 990L bowser 4 wheel braking, 4mm outer & inner tank, inner bafﬂe plates, 12v pump-45L/min, 5m hose, ﬁlter, fuel meter, full road lighting £3,000

Ex hire Woods batwing mower 4.6m cut width, 8 wheel kit, 6 year warranty on gearboxes

Suton Muck Grapple 2019 build, 2.3m wide, galvanised, JCB brackets, only used twice to muck out two sheds, as new

£8,495

£2,200

2.7m Super h/duty ﬂail hyd side shift, h/d ﬂails £8,500 This unit is built to cope with the harshest vegetation Hire charge £225/DAY £14,350

Neil 07979 181770 Bobby 07887 409717 Paul 07741 312873 Email

Front linkage mounted ballast weights front tow hook to ﬁt on weights £80 750kg £725 1050kg £860 1450kg £1,100

nragri@btinternet.com

or nragriaccounts@btinternet.com www.nrichardsonkubota.co.uk

2014 2002 2007 2001 2008

JCB 531.70 loadall, 5000hrs, fully serviced – at the right price .................................£32,500 Merlo 28.7, 6000hrs – a very good buy – tidy throughout .........................................£15,500 McCormick CX95 4wd synchro – very well cared for – must be seen .......................£13,850 Thwaites 6t dumper truck, 4wd, in good working condition .........................................£3,950 Sulky 4m MP06 drill combination Farmforce Cultimate, Suffolk coulters ......................£4,000 Parmiter Utah 250 disc harrow trailed with Cambridge roll – good ...............................£2,250 Kverneland 4 furrow vari-width, can be seen working – excellent metal .......................£3,500 McConnel PA59E hedger, 3 point linkage, T-flails, electric controls – nice ....................£7,500 2015 McHale tractor mounted straw bedder, swivel spout – ready for work..........................£5,250 2015 McHale trailed straw bedder C460 – very little use – now surplus ...............................£9,250 Ritchie auto head yoke for crush or race – as new – galvanised .....................................£400 Hinimoto C174 4wd compact tractor – super little tractor – ideal runabout ..................£3,500 Good choice of Lely fertiliser spreaders checked and ready for use from £3,000 Richford telescopic bag lifter to suit fertiliser spreaders – exceptional condition ..........£1,250 Shelbourne Reynolds shear bucket suit JCB ‘Q’ fit model SB3000 – good ...................£2,750 Good choice of plough presses – 4, 5, 6 furrow 700/900mm rings Amia Bale Boss straw bedder for Hesston type – suit JCB ‘Q’ fit – as new ..................£5,500 Portequip calf creeps/ beef feeder – ex stock at very attractive prices Demo McCormick X7-690 Efficient – a really special deal available for December only Don’t miss out on this – ring now 2019 McHale 660 chopper baler – demo model – full warranty – now for sale Portequip 30’ bale trailer, super singles, 15t – now only ..............................................£7,500 Krone 461 single rotor rake, internal rebuild, good heavy duty machine .......................£3,000 Visit our yard to view the range of new Deutz, McCormick tractors Hayter/Toro lawnmowers now at knockout prices – HURRY NOW!

69228

AGI 4 receiver unlocked to RTK, IMU roll bias module ﬁtted, programmed for Fendt (not to be used as TopCon receiver), Satel RTK radio (RTK high gain ext aerials also available) £500

Visit us on and

68824

Ofﬁce 01787 211701 Luke 07915 669007 sales@lbgmachinery.com

JCB FASTRAC 2140 NEW HOLLAND T5030 4WD TRACTOR FORD 7740 SL DUAL POWER 4WD NEW HOLLAND T5050 4WD TRACTOR JCB 535-95 TELEHANDLER 2004, 9300hrs 2012, 5177hrs, TRACTOR 2010, 1879hrs, 2013 .................................................£24,500 power shuttle ............................£19,750 5200hrs, Quicke Q40 loader ......£18,500 power shuttle ............................£23,250 .................................................£26,000

CLAAS 697 ATZ 4WD TRACTOR MANITOU MLT 628 TURBO VOLVO L25B LOADING SHOVEL MANITOU 735-120 ELITE TELEHANDLER MASSEY FERGUSON 6465 TRACTOR 2006, 7340hrs, 40K, TELEHANDLER 2003, 4872hrs 2015, 2900hrs, 2010, 4800hrs, Dyna 6 loader available .........................£21,000 1997, 7819hrs ..........................£11,500 .................................................£17,750 40K ..........................................£38,950 transmission .............................£27,500

SPEARHEAD ORBITAL 606 HEDGE KRM BOGBALLE L1 PLUS 24M TWIN SANDS SAM 24M 2000L SPRAYER KRM M35W SPREADER McCONNEL PA5860 HEDGE CUTTER 2018, weigh cells, 2016, electronic motion CUTTER DISC FERT SPREADER 7092hrs 2009, L/R cut..............................£7,750 2007...........................................£2,250 ...................................................£7,250 section control ready ....................... POA controls ....................................£12,750

www.lbgmachinery.co.uk

68847

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

2019 Deutz 7250 TTV Warrior demo – your chance to try this superb tractor today reliability, performance & comfort – ring now

All prices + VAT Boxford Suffolk UK

228 www.farmads.co.uk January 2020

fg_class_jan_20.indd 228

13/12/2019 09:54

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268 68776

Tel: 01580 291271 • Mob: 07836 723944 • sales@markhellier.co.uk

£6 4, 00 0

2018 Case Puma 165 Powershift

£2 4, 50 0

2017 Case Puma 175 CVX

£3 8, 50 0

2010 Massey Ferguson 6480

2013 New Holland T7.210 Power Command

2015 T7.200 Power Command, 5198hrs, 200hp, 50kph, a/brakes, f/axle susp, cab susp, f/linkage & PTO, full p/shift, mid mount valves, creep box, Power Beyond, f/tyres 600/60x28 30%, r/tyres 710/60x38 35% Michelins........................... £43,500 2013 T7.210 Power Command, 6918hrs, 50kph, a/ brakes, f/axle susp, cab susp, f/linkage & PTO, hyd top link, Power Beyond, guidance ready, 3 speed PTO, climate control, mid mount valves, exhaust brake, f/tyres 540/65x30 25%, r/tyres 650/65x42 40% Goodyears......................... £38,500 2013 T7.235 Power Command, 5604hrs, 235hp, 50kph, a/brakes, f/axle susp, cab susp, f/ linkage, full p/shift, exhaust brake, mid mount valves, f/tyres 540/65x30 30%, r/tyres 650/65x42 50% Continentals ...................... £35,000 2015 T7.200 Range Command, 6615hrs, 200hp, 50kph, a/brakes, f/axle susp, cab susp, f/linkage & PTO, semi p/shift, mid mount valves, Power Beyond, f/tyres 540/65x38 25% BKT, r/tyres 650/65x38 25% Michelin ............................ £38,500 2014 T7.200 Range Command, 4812hrs, 50kph, a/ brakes, f/axle susp, cab susp, f/linkage, semi p/shift, 4 manual valves, 3 speed PTO, f/tyres 16.9x30 10%, r/tyres 20.8x42 10% tidy tractor other than some rust on r/wheels, re-advertised due to time waster ...................................... £37,000 2014 T7.270 Blue Power, 8025hrs, 270hp, 50kph, a/brakes, f/axle susp, f/linkage & PTO, continuously variable, f/tyres 600/60x30 40%, r/ tyres 710/60x42 50% Michelins, this has every option & is a credit to the previous owner ...........POA

2014 New Holland T.270 Blue Power

Find the most desirable stock at

£3 1, 00 0 £4 6, 00 0 £4 6, 00 0

2012 Fendt 828

2014 John Deere 6190R

£5 5, 00 0

2016 MLT634, 3050hrs, 125hp, 40kph, a/seat, PUH, a/c, new Manitou forks & carriage, f/tyres 460/70x24 100%, r/tyres 460/70x24 100% new Firestones ................................................... £36,000

2015 John Deere 7270R

McCORMICK:

2010 CX110 Xtrashift, 3323hrs, 110hp, f/tyres 320/85x24 60% Firestone, r/tyres 480/70x34 80% Continental .................................................POA

TRACK MARSHALL:

Track Marshall 120, year unknown, hrs unknown, Ford engine, r/PTO, 60–70% undercarriage................................................ £7,000

2018 John Deere 6145R

NOW IN: ENGINES: NEW CNH ENGINES to fit Tier 3, Maxxum 115 & TSA 115, Case Puma, plus New Holland T6 & T7 TYRES: PRICES YOU WILL NEVER GET ANYWHERE ELSE! 440/65x28 Continental (2), 480/65x28 Continental (9), 420/70x24 Continental (20), 380/70x24 Trelleborg (28), 380/70x24 Firestone (12), 320/85x24 Continental (5), 340/85x24 Firestone (6), 13.6x24 Pirelli (12), 14.9x24 Pirelli (8), 540/65x30 Continental (4), 480/70x34 Continental (8), 540/65x30 Firestone (6), 340/85x38 Firestone (4), 650/65x42 Nokian road tyres (4), 520/70x34 Continental (18), 480/70x34 Continental (15), 460/85x30 Firestone (6), 20.8/46 (5), 480/95x50 (1), 650/75x38 (2) Continental, 650/65x42 Continental, 600/65x38 (1) Continental, 520/70x38 (1) Continental, 480/70x34 (18) Continental, 420/85x34 (2), 710/70x38 (1), 650/65x38 (2), 600/65x38 (1), 480/80x42 (1)

We are expecting more tractors to arrive in our yard shortly – Keep an eye on the website!

PO A

£4 7, 50 0

NEW HOLLAND:

MANITOU:

2008 Fendt 820 Vario

£5 8, 00 0

2017 Case Puma 165 Powershift

2015 7726 Dyna 6, 6307hrs, 50kph, a/brakes, f/axle susp, cab susp, f/linkage, semi p/shift, Data Vision, f/service, f/tyres 600/65x28 35%, r/tyres 650/65x42 60% Michelins........................... £49,750 2010 6480, 9717hrs, 160hp, 50kph, f/axle susp, semi p/shift, datavision screen, f/tyres 16.9x28 80%, r/tyres 20.8x38 80% BKTs, v tidy, one owner£24,500

2014 John Deere 7290R, 7672hrs, 290hp, 50kph, air brakes, f/axle & cab susp, f/linkage, continuously variable, leather trim, 5 spool valves, LED w/ lights, 2 f/spool valves, f/tyres 600/70x30 45%, r/tyres 650/85x38 50% Michelins .......................POA 2014 7290R, 7672hrs, 290hp, 50kph, a/brakes, f/axle susp, cab susp, f/linkage, continuously variable, leather trim, 5 spool valves, LED worklights, 2 f/spool valves, f/tyres 600/70x30 45%, r/tyres 650/85x38 50% Michelins..................................POA 2014 6190R, 6036hrs, 190hp, 40kph, f/axle susp, cab susp, f/linkage & PTO, continuously variable, climate control, GreenStar ready, f/tyres 16.9x30 20%, r/tyres 20.8x42 30% Continentals ....... £46,000 2015 7270R, 6590hrs, 270hp, 50kph, a/brakes, f/ weights, f/axle susp, cab susp, continuously variable, Isobus, GreenStar ready, elec mirrors, f/tyres 600/70x30 70%, r/tyres 650/85x38 60% Michelins, been out on hire all summer only f/ panhard rod replaced, not been a problem, 100% reliable .............................................. £55,000 2018 6145R, 2182hrs, 145hp, 45kph, a/brakes, f/ axle susp, a/seat, semi p/shift, Power Beyond, Autoquad, Isobus ready, f/tyres 420/70x28 75%, r/tyres 18.4x38 70% Michelins .................... £58,000 2015 6195R, 7228hrs, 195hp, 50kph, a/brakes, f/axle susp, cab susp, a/seat, f/linkage, continuously variable, star fire 6000 receiver, hyd top link, f/ tyres 420/85x34 80% BKT, r/tyres 480/80x50 10%, apart from hrs, tractor is immaculate .. £44,000

2014 John Deere 7290R

£4 4, 00 0

£5 7, 00 0

MASSEY FERGUSON:

JOHN DEERE:

2015 John Deere 6195R

£3 6, 00 0

2018 Case Puma 185 w/Case LRZ160 loader

2008 820 Vario, 11700hrs, 200hp, 50kph, a/brakes, f/axle susp, cab susp, a/seat, f/linkage & f/PTO, a/c, f/tyres 540/65x30 40%, r/tyres 650/65x42 60% (waiting for 60% r/tyres to be fitted) .... £31,000 2012 828, 8769hrs, 280hp, 60kph, a/brakes, f/axle susp, cab susp, a/seat, f/linkage, continuously variable, f/tyres 600/70x30 30%, r/tyres 710/70x42 25% BKTs, a credit to previous driver .......................................................... £46,000

2016 Manitou MLT634

PO A

£7 2, 50 0

2015 Case Magnum 315 CVX

FENDT:

Buy and sell online — www.farmads.co.uk

£7 0, 00 0

2014 Case Puma 160 CVX

2014 Puma 160 CVX, 5382hrs, 160hp, 50kph, a/ brakes, f/axle susp, cab susp, f/linkage, continuously variable, mid mount valves, Power Beyond, f/tyres 480/70x30, r/tyres 580/70x42 Trelleborgs .................................................. £37,000 2015 Magnum 315 CVX, 3332hrs, 315hp, 50kph, a/brakes, f/axle susp, f/linkage & PTO, continuously variable, full Accuguide, PUH, f/ tyres 600/70x38 80%, r/tyres 710/70x42 60% Michelins .................................................... £70,000 2014 Puma 230, 6400hrs, 230hp, 50kph, a/brakes, Quicke Q75 loader, f/axle susp, f/linkage, continuously variable, some rust on r/wheels & step, on hire but can be replaced, f/tyres 540/65x30 50%, r/tyres 650/65x42 70% ..... £41,000 1999 CX90 MFD, 5918hrs, 90hp, a/c, deluxe cab, very tidy, f/tyres 12.4x24 20% , r/tyres 13.6x38 50% Goodyear originals .....................................POA 2018 Puma 185 with Case LRZ160 loader, 1461hrs, 185hp, 50kph, a/brakes, f/axle/susp, cab susp, f/linkage, full p/shift, ABS, full guidance, mid mount valves, mech spool valves, f/tyres 540/65x30 80% , r/tyres x42 85% Michelins, re-advertised due to time waster ................. £72,500 2017 Puma 165 p/shift, 2644hrs, 50kph, a/brakes, f/ weight, guidance ready, Power Beyond, deluxe seat, 4 spool valves, f/tyres 600/60x28 60%, r/ tyres 710/60x38 70%.................................. £57,000 2018 Puma 165 p/shift, 3848hrs, 50kph, Command Arm, extra lights, exhaust brake, mid mount valves, linkage never been used, f/tyres 480/65x28 100%, r/tyres 600/65x38 100% new BKTs ........................................................... £47,500 2017 Puma 175 CVX, 1770hrs, 50kph, guidance ready, f/linkage, mid mount valves, Power Beyond, Isobus ready, 4 spools, a/brakes, f/ tyres 600/60x30 80%, r/tyres 710/60x42 80% Michelins .................................................... £64,000

PO A

£3 7, 00 0

CASE:

2010 McCormick CX110 Xtrashift

www.markhellier.co.uk January 2020 www.farmads.co.uk 229

fg_class_jan_20.indd 229

12/12/2019 11:31

JCB 531-70 Agri Special, registered November 2016, dealer maintained, 3000hrs, reversing camera. £39,750 ono. A Whitehead Tel 07771 507279 (Norfolk)

MILL & MIX 1.5m, brackets to suit Weidemann

2008

c/w slurry door, wide angle PTO & 650x38 wheels delivery available

OLD potato boxes, good enough to hold logs of wood. £15 ono. E Sparrow Tel 07900 683748 (Cambs)

Hydramex Limited

£7,650 +VAT ono

07976 794383 Shropshire PEST CONTROL

GENERAL FARM AND AGRICULTURAL SUPPLIERS OF TRACTOR & WEARING PARTS, HARDWARE, CLOTHING ETC. 35-68806

RY STORE

COUNT ALL IN ONE

David Grundy 07879 698473 AGRICULTURAL

KONGSKILDE hammer mill, 5.5kw single phase (motor could be replaced with 3 phase), with some piping, for pig & poultry feed. £350. J Bristow Tel 01363 772965 (Devon)

FOR FARMERS GUIDE READERS

£1,000

GRUNDY

D10 Muck Spreader

33-68991

Tel: 01280 705202 Fax: 01280 704163 Email: hydramex@hotmail.com

Field Farm, Charlton Road, Evenley, Brackley, Northants, NN13 5GH

ALVAN Blanch M-45 mixer with model R-16 roller & plate grinder. £450 ono. J Adams Tel 07812 367009 (Worcs)

MANITOU 730/120 telehandler, very tidy condition, clock working & showing 4700hrs, good tyres, pick up hitch, ex scaffolders machine so had an easy life, more photos on request, viewing welcome anytime. £4,750. I Woodward Tel 07960 866025/01455 221112 (Leics)

EB cake auger system, 2 motors, 24 droppers, 70' special auger, no longer used. D Seymour Tel 07850 292743 (Bucks) ACCESS ladder, strong steel construction, non slip rungs. £50 no VAT. D Ivens Tel 07969 877834 (Northants)

07748 004794 01245 442224(T) DOWDESWELL DP8 4 furrow, good metal. M Cottage Tel 01799 584225/07989 297074 (Cambs) • Variable firing sequence • 7 day - 24h clock • Integral legs • Opt integral battery • Opt solar panel • Unique silent Sunday option

from £320 + vat echneat 35-68967

MUCK & SLURRY

MATBRO PS5000C hi-reach (7m) loader, 6788hrs, 1990 model, torque converter, 6 cyl Ford engine & axles, all cable controls. £6,000. W Hirst Tel 01226 790245/07585 902367 (S Yorks)

McHALE sheargrab, 3 rams, good condition, no longer used. D Seymour Tel 07850 292743 (Bucks)

The MASCHIO plough range is now available from Writtle Farm Machinery. Please call for more information or to arrange a demo. www.writtlefarmmachinery.co.uk

DIAMOND mobility scooter. in good order, 12" wheels, service history, new seat, speed up to 8mph, road legal. £420 ono. J Swan Tel 07747 111070 (Essex) ECCLES caravan, suitable for storage or shoot wagon. T Saunders Tel 07752 040480 (Norfolk)

POA West 3000 Gallon Dual Spreader

2014 Alvan Blanch roller mill & mixer, RV280, 11kw e phase mill, auto shutdown, adjustable rolling widths, M90 horizontal mixer, 2.2kw 3 phase motor, auto levelling, rear additive hopper (hopper not included), rolled 2000t. A Marshall Tel 07795 278957 (S Yorks)

BEST PRICES for

GRAIN FUMIGATION GRAIN STORE TREATMENTS full coverage GRAIN MONITORING and RODENT CONTROL 2012, 650/65x30 wheels, 70%, latest spreading rotor, excellent condition

Call

COMMAND PEST CONTROL

01530 229686 or 07831 113316 34-69187

www.midlandsagriplant.com

DOWDESWELL MA145 plough, 6 furrow ( 5+1 ), on land/in furrow with DDS, 2011, pin adjust skims, rear disc, good metal, very good condition. £8,950+VAT ono. E Fellowes Tel 07976 668314 (Warks)

36-69215

TWOSE tipping buckrake, 8' wide, done very little work, just requires 4 new tines, £300 ono. R Horner Tel 07769 806840 (Beds)

DOWDESWELL DP7D 5f (4+1) 12” UCN. £895+VAT; DOWDESWELL DP100S 4f (3+1) UCN. £1,650+VAT; KVERNELAND VD85-160-8 4f, manual v/w, No8s, excellent. £3,950; also quantity of new UCN wearing metal – enquire; plus 3 new KV No8 mouldboards – enquire. GDO Howell Tel 07903 089391 & 01728 723683(T) (Suffolk)

MASCHIO Ploughs

RMH WAV 14 mixer, 1.4m elevator, weighing system, recent new blades & service. £5,950+VAT. C Goater Tel 07979 556169 (Hants) MATBRO Teleram 40 inner boom. £250; Matbro Teleram 3 (TR250) inner boom. £500. GW Harrold & Partners Tel 01485 518244 (Norfolk)

RABE Eagle 140C 5 furrow reversible plough & press, slatted mouldboards, hydraulic release arm, 1995, no cracks or welds, new points, spare slats, etc, good condition. £1,750+VAT. R Maundrell Tel 07785 568800/01527 854834 (Warks)

01787 248049

www.commandpestcontrol.co.uk

DOWDESWELL DP7F 6+1, seventh row not complete, 12", good metalwork, hyd front furrow, ready to plough. £1,450. S Matthews Tel 07885 622209 (Beds)

POTATO EQUIPMENT

REDUCE HARVESTING DAMAGE WITH RUBBER WEB COVERS QUICKSPLICE WEB JOINERS RUBBER GRADING SCREENS PERFORATED RUBBER WASHER BELTS

37-68960

New/Shopsoiled Muck Fork & Grab

PLOUGHS

Richard Western

MISCELLANEOUS

31-69242

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

PIN & cone dirt bucket, good condition. £450. F Bennett Tel 07889 132784/01371 870818 (Essex)

1999 RICHARD WESTERN 10t vertical beater, manure spreader. £3,000 ono. Hunt Bros Tel 07702 734715(T)

34-69362

MERLO 28.8 Plus teleporter, 2013, 47000hrs, 8m 3-stage boom, good condition, can be viewed at Oakﬁelds Machinery. £27,500. P Rogers Tel 07977 728938/01763 838537 (Herts) MATBRO 40 telehandler, pivot steer, pallet tines & bucket, good condition, reconditioned brakes & torque, hydraulic front attach & rear trailer hitch. £4,000 no VAT. R Brown Tel 07970 064760 (Derbys)

MATERIALS HANDLERS (cont)

Tel: 028 9127 5913 Email: info@agri-web.co.uk

230 www.farmads.co.uk January 2020

fg_class_jan_20.indd 230

13/12/2019 10:38

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

Telehandler Tyres

tyres@farol.co.uk

Visit www.farol.co.uk for more stock

HUGE RANGE

£385

XMCL 460/70R24

£585

CALL US TODAY 01844 277699

£480

each Ex. VAT

Hungerford, Berkshire

01488 649150

01455 638970

Bibload 460/70R24

£625

each Ex. VAT

Hinckley, Leicestershire

each Ex. VAT

Midhurst, West Sussex

01730 819989

68775

07768 171085 March • Cambs info@harrisontractors.co.uk

Photos & more at:

www.harrisontractors.co.uk

New and Ex Demo Machinery 0% Finance

Pottinger Terrasem C6, Artis Plus 6m drill, 2012, bout marker, preems, double disc coulters, v clean ...............................................................POA Pottinger 6030T Synkro, stubble cultivator, 2012, ex demo, still 0% .............POA Pottinger 3030, Synkro stubble cultivator, 3m, mixing discs, pack ring roller ...POA Pottinger Terradisc 6001, 6m, trailed, pack ring roller ...................................POA Pottinger Terradisc 5001, 5m, trailed, pack ring roller ...................................POA

Pottinger 3001, 3m Terradisc, pack ring roller ..............................................POA Pottinger FoxD, 4m, pack ring roller .............................................................POA New INO MKS 2.25m verge mower, hammer flails, rear roller ...................£6,500 Ex demo, INO Profi Mega flail, 2017, f/& rear mounted, hyd sideshift, hammer flails, will cut 8cm, v heavy duty ................................................£5,500

Buy and sell online — www.farmads.co.uk

IN STOCK AT GREAT PRICES

Thame, Oxfordshire

Duraforce Utility 460/70R24

R8000 Utility 460/70R24

Used Machinery

John Deere 6190R, 2013, 4600hrs, Autoquad, 40k, TLS, cab susp, Autotrac ready ......................................................................................£49,500 John Deere 6150R, 2013, 2800hrs, 50k, Autopower, Command Arm, Autotrac ready, TLS, cab susp, 650/65/42, 540/65/30, ours from new ..£56,000 John Deere 6150R, 2015, 2900hrs, 50k, Powerquad, TLS, Autotrac ready, 520/85/42, 420/85/30, v nice .....................................................£56,000 John Deere 7930, 2008, 8800hrs, 50, Powerquad, Autotrac ready, 650/75/38, 600/65/28 80% ..................................................................... due in John Deere 7530, 2011, 7800 hrs, Autopower, 50k, Command Arm, guidance ready, v nice ...........................................................................£38,500 John Deere 6930, 2007, 6500hrs, Autoquad, 40k, TLS, cab susp, f/linkage .. due in John Deere 6930, 2010, 7700hrs, Autopower, 40k, TLS, cab susp, 580/65/38 60%, 420/65/28 90% ............................................................£33500 John Deere 6920, 2003, 40k, Autoquad, TLS, cab susp, 650/65/38, 640/65/28 95%.....................................................................................£28,000 John Deere 6330, 2011, JD 651 loader, only 6800hrs, Powerquad, 40k, a/c ..£29,500 John Deere 6230 Premium, 2008, only 3300hrs, Powerquad, 40k, ex college, v clean .....................................................................................£27,000 John Deere 6130, 2011, 4800hrs, JD 633 loader, Powerquad, 40k, a/c, 16.9x34, 13.6x24 60% ...................................................................£28,500 John Deere 6420, 2003, 5100hrs, Powerquad, f/linkage, 16.9x38, 14.9x24 70% ........................................................................................£19,950 John Deere 6910S 50k, 2001, 7200, Autoquad, TLS, cab, 650/65/38 80%, 540/65/28 20%, tidy ....................................................................... due in John Deere 6400, 1994, 6250hrs, Powerquad, 40k, 18.4x38, 16.9x24, tidy ..£13,000 Case CVX 160, 2014, 5200hrs, 50k, guidance ready, 650x42, 540x30, nice ..£38,000 Case Puma 215, 2014, 7600hrs, 50k, f/link & PTO, new 650x42, 540x30 tyres, v tidy ..............................................................................£36,250 Case Puma 170, 2012, 5000hrs, p/shift, 40k, f/susp, 650x38, 540x28, straight & tidy .......................................................................................£38,000 Case Puma 155, 2011, 4500hrs, 50k, f/linkage, 520x38, 480x28, nice..£34,000

Case Puma 155, 2009, 5700hrs, 50k, Multicontroller, f/linkage, 650x38, 600x28 ...................................................................................£26,000 Case Maxxum 140, 2008, 4300hrs, Multicontroller, susp, v nice ............£27,000 New Holland T7.210, 2013, 3000hrs, 50k, Power Command, f/& cab susp, Sidewinder, one owner .................................................................£42,500 New Holland T7040, 2010, 8000hrs, p/shift, 40k, full susp, f/linkage, 650x42, 540x30 ...................................................................................£27,500 New Holland TM 155, 2003, 8000hrs, 40k, Power Command, f/& cab susp .£18,500 Claas Arion 640, 2012, 50k, f/& cab susp, f/weights, 650/65/38, 640/65/28 ...POA Deutz Agrotron 150, 2007, 6700hrs, 50k, f/& cab susp, f/linkage & PTO, tidy .£23,500 Manitou 735-120, 2010, 3800hrs, p/shift, 40k, a/c, pin & cone headstock ..£26,000 JCB 531-70 Agri-Xtra, 2009, 7200hrs, Q fit headstock, 17.5x24 50%, full spec ................................................................................................£25,500 JCB 530-70 Farm Special, 2003 & 2004, 6000 hrs, Q fit headstock, PUH, full spec .............................................................................. from £18,500 JCB 535-95 Agri, 2003, high hrs, Q fit headstock, PUH .........................£16,500 JCB 528s, 2000, 7000hrs, PUH, 17.5x24 50%, ex arable farm, tidy .......£16,500 JCB 310S, 2008, 9000hrs, p/shift, a/c, 40k, pin & cone ........................... due in JCB JS200, 1995, 9.5m long arm, 2 buckets ........................................£14,500 Pottinger Terrasem C6, Artis plus 6m drill, 2012, bout marker, preems, double disc coulters, v clean ...............................................................POA Pottinger 45s Plus plough, 2013, hyd variwidth, 46w bodies, large depth wheel, as new .............................................................................£13,500 Pottinger 4030T, 4m trailed stubble cultivator, pack ring roller.................£14,500 Pottinger Lion 6000 6m p/harrow, 2013, pack ring roller, quick fit tines, v nice....................................................................................................£12,500 Armstrong Holmes 12t construction dump trailer, super singles ...............£3,950 John Deere rowcrop wheels, 13.6x48, 12.4 x 32 or 34, suit JD 6430, 6125R ..£2,950 John Deere 12.4x32 wheels and tyres, for JD 6430 or similar .....................£650 Rowcrop wheels 13.6x46, 12.4x32 as new to fit Case Maxxum or similar £1,750

January 2020 www.farmads.co.uk 231

fg_class_jan_20.indd 231

12/12/2019 11:36

Hallmark Tractors Russells (Kirbymoorside) Ltd Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

MACHINERY FOR SALE TRACTORS

NEW HOLLAND T8.380 2018, 630hrs, Auto Command, 710/70R42 new wheels & tyres, f/linkage, 262l pump, 6 remotes, AGR. ..................................£110,000 61031746 NEW HOLLAND T7.210 Auto Command, 2018, f/links & PTO, 650/65R42600/65R28, approx 3000hrs ............. POA 21031062 NEW HOLLAND T7.315 HD, 2018, 50kph Auto Command, 1000hrs, f/linkage c/w MMV, 710/70R42 600/70R30, RTK receiver & nav controller, f/PTO ﬁtted.............................................................£103,000 41030281 NEW HOLLAND T7.315 HD, 2017, 50kph, a/brakes, Auto Command, 710/70R42 600/70R30, full susp, 4 spools, 3yr 3000hr Platinum cover, elec mirrors .......£95,000 61028043 NEW HOLLAND T7.290, 2018, 50kph, eco, bar axle, 210 pump, 3MMV, f links, cab Pack 2, high mount headlamps, 12 LEDs, on 710/75-R42 650/60-R34 Trelle, external a/line .................................................£89,950 41032516 NEW HOLLAND T7.230 Auto Command 2018, 50kph Eco, AGR, ISO Power Beyond, joystick, 2 MMV, 4 spools, 110mm rams, f/links & PTO with couplers, cab Pack 2, high headlamps, 12 LEDs, elec mirrors, 710/60R42 600/60R30 Michelin, twin beacons. .......£84,000 61031787 NEW HOLLAND T7.245 Auto Command, 1750hrs, f/ linkage, 2MMV, 2017, 650/65R42 Michelin. .............£83,000 41027120 JOHN DEERE 6195R, 2017, 50kph, full susp auto quad trans,3500hrs 650.65 R42 & 600/65R28 wheels & tyres 85%, Starﬁre ITC GPS, f/linkage PTO, Quicke 76 loader, serial no, 7455418, 2016 euro h/stock, susp elec mirrors, elec spools 4 fender controls Isobus .....................................................................£85,000 41031061 NEW HOLLAND T7.270 Auto Command, Blue Power, 2016, 3000hrs, f/linkage & PTO with MMV, leather heated seat, 710/70R38 600/65R28 ........................£79,000 41029731 NEW HOLLAND T7.225, 2018, Auto Command, 650/65R42, 540/65R30, 2 mid mounts, f/links & PTO, AG ready, cab pack 2, 16 LEDs, Isobus, Power Beyond..........................................................£77,000 91029148 NEW HOLLAND T7.270, 4wd, 2016 Blue Power f/linkage on 710/70x38 tyres 50% ............................£76,000 41032517 NEW HOLLAND T7.210 A/C, 50kph, 2018, 2100hrs, exhaust brake, fully suspended with f/brakes, AG Ready fast steer, f/linkage, joystick, 2 MMV with f/ services, 4 r/remotes, 100mm lift rams + hyd top link dynamic seat, leather steering wheel, carpet, HTS2, high mount headlamps, 12 LEDs elec mirrors, twin beacons, 650/65R38 540/65R28 Michelin, Isobus Class 3 ....................................................................£72,000 41029640 NEW HOLLAND T6.180, 2019, 50kph Electro Command, exhaust brake, auto PTO, fully suspended, 113L pump, 4 remotes, 90mm lift rams, high headlamps, 12 LEDs, 2 beacons, 650/65R38 540/65R28 Vredestein .............................................£70,000 11031936 NEW HOLLAND T7.210 Range Command, 2018, Classic 50kph, 1500hrs, f/links, 4 spools, Power Beyond, Cab Pack 2, 12 LEDs, 650/65R38 540/65R28£62,50091029149 NEW HOLLAND T7.210 Range Command, 2018, Classic 50kph, 1500hrs, f/links, 4 spools, Power Beyond, Cab Pack 2, 12 LEDs, 650/65R38 540/65R28 ..............................................................£62,500 91029151 NEW HOLLAND T7.210, 2018, Range Command Classic 50kph, f/links, 650/65R38, 540/65R28, Cab Pack 2, 4 spools, 12 LEDs, Power Beyond ...............£62,500 91029152 NEW HOLLAND T7.210, 2016, Classic, T4B, Cab Pack 2, 12 LEDs, f/links & PTO with services, 650/65R38 @50%, 540/65R28@50% 50kph, full susp YX66 FZF .................................................................£57,500 41031924 NEW HOLLAND T7.210 R /C, 2017, f/links, 4 aux valves, Classic arm rest, cab Pack 2, 12 LEDs, 50kph, a/brakes, full susp, 650/65R38 540/65R28 @85%, approx 2459hrs .......................................................£56,000 21025696 NEW HOLLAND T7.210 Range Command, 2016, 50kph, f/linkage, 4 remotes, Dynamic Comfort Cab Pack, 8 LEDs, 650/65R38 540/65R28......................£56,500 11031563 NEW HOLLAND T7.210, 2016, Range Command, Classic 50kph, T4B, cab Pack 2, 12 LEDs, f/links, 650/65R38 540/65R28 @50%, full susp .................£55,500 41031925 NEW HOLLAND T7.210, 2014, Auto Command, 50kph, f/links & PTO, cab & f/axle susp, 4 electronic spools, 650/65 R38 @90% 540/65 R28 @90% ..................£54,000 11031194 NEW HOLLAND T7.210 2016, Range Command, Classic 50kph, T4B, cab Pack 2, 12 LEDs, wt carrier only, 650/65R38 50% 540/65R28 50%, full susp YX66 FZE .................................................................£53,500 41031923 NEW HOLLAND T6.140, 2016, 16x16 Electro Command, 40kph, 3 spd PTO, fully suspended, CCLS 113L pump, loader ready, f/linkage, 520/70R38 420/70R28 Michelin ................................................£48,500 31027796

NEW HOLLAND T7.210 Power Command, 2014, 50kph, Power Command, Classic, a/brakes, mech spools, f/links, 580/70R42 & 480/70R30 @50%, 2400hrs ...................................................................£50,000 NEW HOLLAND T6.155 Electro Command, 2016, 40kph, 3 remote valves, dynamic f/fenders, pass seat, carpet, std r/fenders, cab susp, f/linkage, 520/70 R38 80% 1975hrs, f/w T412 loader(41031525) ..............£49,950 CASE Maxxum 135, 2017, 50kph, U312 loader, a/brakes, 3 spools, vision roof..................................£49,500 NEW HOLLAND T5.120 Electro Command, 2017, 400hrs, 40kph, cab susp, 2 slice mech MMV, APUH, 8 worklights (not LED), 540/65R34 440/65R24 Dyna fenders, c/w TL750MS loader ..................................£49,500 NEW HOLLAND T6.120 Electro Command, 40kph 2016, 1950hrs, cab susp, New Holland 740TL loader with Euro faceplate, 480/70R38 380/70R28 .............£49,000 CASE Puma 160, 2014, 3200hrs, full p/shift, 50kph, full susp, man spools, elec mirrors, bar axles, 650/65R38 640/65R28 Michelin tyres @60% f/wt carrier ...............................................................£47,500 NEW HOLLAND T6.155, 2016, Tier 4A six cylinder 4wd c/w Electro Command 40kph trans, plus trailer brakes, telescopic mirrors, f/linkage, 3 spools 2 spd PTO, hyd push back hitch, f/axle susp, pass seat & a/c Mitas tyres 75% .......................................................£47,500 NEW HOLLAND T6.155, 2016, Electro Command, 40kph, 3 remote valves, dynamic f/fenders, pass seat, carpet, twin LED beacons, std r/fenders, cab susp & f/ linkage 520/70 R38 80% 1900hrs, FJ66EKN 2016 ...£46,500 NEW HOLLAND T6.155, 2016, Electro Command, 40kph, 3 remote valves, dynamic f/fenders, pass seat, carpet, twin LED beacons, std r/fenders, cab susp & f/ linkage 520/70R38 90% FJ66 EKM, 1300hrs............£46,000 T7.260, 2012...........................................................£45,000 NEW HOLLAND T7.200, 2015, 4311hrs, 650/65R38 @80%, 540/65 R26@30%, 4 spools.......................£45,000 NEW HOLLAND T7.235 Sidewinder c/w f/linkage, 2013 approx 3700hrs, S/n ZCBZ04054 ....................£44,000 NEW HOLLAND T7.200 Range Command, 2014, 50kph, C Pack, second beacon, 4 remotes, elec loader ready with joystick & midmounts, 650/65R38 540/65R28 ..............................................................£44,000 NEW HOLLAND T6.165 Electro Command no susp, on 520/70x38 70% 950hrs ...........................................£42,000 CASE Puma 160, 2012, 50kph, full p/shift trans, 5250hrs, 650/65 R38 &, 2014, 540/65 R28 @50% .....................................................................£39,000 NEW HOLLAND T5.110 Electro Command, 2017......£43,000 NEW HOLLAND T5.120 Electro Command, 2017 cab susp, 16.9 38 Vredestein tyres, hyd hitch, 6 w/lights, telescopic mirrors & 10 wts .....................................£42,500 NEW HOLLAND T7.235 Auto Command, 2014, f/linkage, electronic valves, 650/75R38600/65R28 ...£42,000 NEW HOLLAND T7.200 Power Command, 2013, c/w 4 r/spools on 600/65-R38 rears, 95% & 480/65-R28 fronts 70% s/n ZDBN11965 reg MK63 ZGJ hrs 4991 ..................................................................£39,500 NEW HOLLAND T6.120, 2013, 4cyl, 4wd, c/w 3spd PTO, Electro Command 40kph gearbox with 3 spools, ﬁxed mirrors, low roof & 460/85 R38 rear, 380/85R28 f/tyres, f/w Quicke Q41 p/loader with anti bounce accumulator .............................................................£38,950 McCORMICK X7.450, 2014, 50kph, full susp, 3 elec spools, f/wts, on 600/65 R38 & 480/65 R28 f/tyres 70% 64 reg ...................................................£37,950 NEW HOLLAND T5.105 utility, 2018, 80hrs, Dual Command, a/c, 3 spd PTO, air seat, as new .............£37,000 NEW HOLLAND T6080,2009, Power Command 50kph, f/links & PTO, elec mirrors, 650/65R38 540/65R28 with with a Q78 lower 6400hrs ..............£36,500 CASE Maxxum 110, 3134hrs, 40kph, std f/axle, cab susp, 16x16 trans, 3 spools, a/c, 480/70R38 380/70R28, Trima +4.1P loader, euro/SMS h/stock, 3rd service, hyd locking ...........................................£36,000 NEW HOLLAND T7.200, 2012, 50kph, f/linkage, C Pack, twin beacons, on 580/70 R38 40% &480/70 R28 30% YX62 CXA 6250hrs 2012 ..........................£35,000 MASSEY FERGUSON 6480 Dyna 6,2007, 6832hrs, mech spools, f/links, a/brakes, a/c, cab susp, 460/85R38 & 380/85R28, c/w Quicke Q60 loader, mech locking, euro h/stock, 3rd service ...................£34,000 NEW HOLLAND T7050 Power Command,2009, f/linkage, elec spools, twin beacons, on 650/65R42, 540/65R30 ..............................................................£32,000 NEW HOLLAND TD5.95, 12x12 with shuttle, 3 spools, a/seat, a/c, 16.9 R34 tyres, only 600hrs ...................£32,000

61030223

41031922 11031732

41031458 11031483

91032389

41032591

41031921

41031920 31030453 31032392 51032283

31031783 41032471 11026732 11032284 41032493 11031833

41032290

41031960 41031460 41031832 41031137

61030246 41031919

61030222 41031025 21029688

NEW HOLLAND T6080, 50kph,2008, 6350hrs, Power Command trans, c/w creeper gears f/& cab susp on 650/65 R38 &540/65 R28 15% all rnd ................£29,950 MASSEY FERGUSON 5613 4wd, 2014, Dyna 4 420/85 R34 r/(16.9-34) 30% &340 R24 20% ...........£29,500 NEW HOLLAND T7030,2008, Power Command, c/w man spool valves, cab susp, f/axle susp, 50kph, f/linkage, 1 ﬂashing beacon, 540/1000 PTO on 650/65R38 rears & 540/65 R28 ...............................£29,500 NEW HOLLAND TD5.95 4wd, 2016 12x12 p/shuttle, a/c, a/seat, f/fenders, 4 f/end wts on 420/85R34 r/tyres & 13.6 R24f/tyres .........................................£28,500 NEW HOLLAND T6030 Dual Command, 2010, with Q 10-70loader 18.4x38 40% .............................£28,000 NEW HOLLAND TS125A,2004, Electro Command 40kph trans, cab susp, 4 man spools, a/c, 14 10 Series wts, f/fenders, on 520/70 R38 & 420/70 R28 .............................................................£28,000 NEW HOLLAND T5060 4wd, 2012, 3150hrs, c/w Quicke Q40 loader, a/c, a/seat ..................................£27,500 JOHN DEERE 6330 std, 2008, PowerQuad trans, 40kph, 3 mech spools, 4600hrs, a/c, a/seat, tyres 70% .........................................................................£27,000 KUBOTA M108S, 2011 c/w MX U8 loader, F/R shuttle, a/c, a/seat, 2 spools, mech hyds, 3100hrs, tyres 80% ................................................................£26,500 CASE CVX 175,2008, 10750hrs, f/linkage, suspended axle, cab susp, a/c .................................£24,500 JOHN DEERE 6820,2002, 6133hrs, 40kph, full susp, Autoquad trans.........................................................£24,000 NEW HOLLAND T4.75 Powerstar, 2017, 12x12 Syncro shuttle, 1650hrs, hyd hitch, 420/80R30 280/85R24, v tidy. .......................................................................£22,500 NEW HOLLAND TM190 Power Command, approx 7507hrs, 4 elec spools, f/links,2004.........................£18,000 NEW HOLLAND T5030 2wd, 30kph, 24x24 Dual Power trans, p/shuttle & p/clutch, a/c & a/seat, 2 spd PTO & 3150hrs, 7.50 -16 f/tyres 13.6 R38 ...............£17,750 NEW HOLLAND TS135A,2005 .................................£14,000 CASE 5140, 1995, 4wd............................................£12,200 KUBOTA STW34 Compact, Rops, turf tyres ..............£12,500 KUBOTA X2350 Compact, 2009, 1300hrs, 54" side discharge deck, clam type collector ............................£8,000 JOHN DEERE 3050 4wd, 1998 with SG2 cab & f/wt frame, 10000hrs ........................................................£7,450 JOHN DEERE 2040S 2wd, 2wd, 7800hrs ...................£5,500 T412 MX loader, 2017, loader boom, as new ..............£4,750 T412 loader boom & brkts to suit T6.155 T4a.............£3,950 Q55 loader to ﬁt T6010 ..............................................£3,750 U6 loader c/w hyds & brkts & euro face plate, taken off a T5040, would suit TL/TLA T50. ..........................£2,950 T7000 LWB wheels & tyres Michelin 650/75 R38 @25% 600/65R28 5%...............................................£1,250 SET of 22 fan weights & carrier c/w 3pt linkage frame. ........................................................................£1,395 KUBOTA B2530 Compact, 2008 HST, Rops, turf tyres & loader, 2000hrs .......................................................... POA

41031138 41031069

51030151 51031501 41032472

51030463 11032619 21032181 21031465 61031910 61032702 11031513 61030068 41032500 41032483 41031266 71031470 31028946 41031371 41031796 41031525 41031102 41031673 41031704 41031042 21026166 71032330

ATV/RTV UTILITY VEHICLES

KUBOTA RTV-X900TR, 2016, camo, f/windscreen, wiper, BKT tyres 80%, road regd, 1607hrs ..................£8,600 CAN AM Traxter AM ATV ................................................ POA KUBOTA RTV-X900, 2017, full cab, 550hrs ...............£12,500 KUBOTA RTV-X900TR camo utility vehicle, roof & screen, wiper, washer, w/lights, bedliner & ball hitch ...£9,000 KUBOTA RTV900 camo, drop down doors, tow ball ....£8,750 POLARIS Ranger, diesel, full cage & heater, road legal, wide tyres, 2/4wd, 2015 ............................................£8,500 HONDA TRX500 FM6, 2017 full road kit, red, approx 400hrs .......................................................................£5,995 HONDA TRX420 FM2, 2017 man, p/steering ..............£5,500 CAN AM 450 PRO f/& r/boxes ....................................£5,000 HONDA TRX500ES, 2015...........................................£4,650 HONDA TRX420 FE, 2012, 4668km, 245hrs, elec shift, tow ball .............................................................£4,750 HONDA TRX500FE1, 2015, Electic shift trans, 1380hrs, average tyres ..............................................£4,500 HONDA TRX420 FM2, 2015 4 wd, man, p/steering, towball .......................................................................£4,350 HONDA TRX500 FPA, 2012, auto/esp, p/steering, new tyres, hydro model, good bike, approx 2860hrs ..........£4,250 HONDA TRX420 FM, 2012 man, p/steering, road regd, tow ball .....................................................£3,450 KAWASAKI Mule, 4 seater ..........................................£3,000 HONDA CRF150, 2014, junior motorcross bike, man gears, 4 stroke ...........................................................£2,500 HONDA TRX250 FM ...................................................£1,900

11027416 11032221 11031510 11031893 21030000 21029376 21031841 61031128 11031894 11026291 61029823 91030073 91029908 21026470 91032588 71032176 91027932 31032462

Plus loads more stock – please view our websites www.hallmarktractors.com & www.russells.uk.com 232 www.farmads.co.uk January 2020

fg_class_jan_20.indd 232

12/12/2019 11:38

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

Hallmark Tractors Russells (Kirbymoorside) Ltd 69088

MACHINERY FOR SALE WESSEX ZME155 flail 1.55m, 3pt linkage, hyd offset ...... POA TORO A209:G235 LT3340 Triple, 2012 .....................£10,000 TORO 3420 Triflex Hybrid, 2012, c/w 3wd, 11 blade units r/roller scrapers ...............................................£10,000 RANSOMES Highway 3 Triple, 2010 ...........................£8,000 HAYTER LT324, 4wd, 6 bladed Magna units ...............£7,000 FERRIS IS700Z 52 zero turn, 2018.............................£6,500 FERRIS IS700Z 52 zero turn, 2018.............................£6,500 TORO GM7210, 62" deck, c/w recycler kit ..................£6,000 HAYTER LT324 Triple .................................................£5,000 KUBOTA G18 LD 48" diesel ride on c/w collector ........£4,800 TORO RM3100-D.......................................................£4,200 KUBOTA GR2120 ride on, 2012,350hrs ......................£4,200 TORO MDE ................................................................£4,150 DENNIS Razor Ultra cylinder c/w tungsten groomer & T bar handle (D140T) .................................................£4,000 RECO Grasshopper zero turn, 2010, only 200hrs use, side discharge............................................................£3,950 KUBOTA G2160, 21hp diesel, hydrostatic, 48" r/discharge deck, 940hrs ...........................................£3,950 KUBOTA GR1600 ride on, 2010 c/w collector .............£3,600 HAYTER LT324,2005..................................................£3,000 TOMLIN TMX185 flail, 2018 .......................................£3,000 DENNIS Roto Rake Mk5 scarifier c/w 1.6mm scarifying reel ............................................................£3,000 LOGIC TRM120B12FW rotary topper 1.2m wide, Briggs & Stratton eng, triple blade, off d/bar facility, remote throttle & flotation wheels ...............................£2,500 HAYTER LT322...........................................................£2,500 KUBOTA LA424 EC c/w counterwt .............................£2,500 KUBOTA LA424 EC loader c/w counterwt ...................£2,500 RYAN 12 turf cutter ....................................................£2,200 TRUE Greens Iron ......................................................£2,000 ALLETT TR34 rotary 2016 .........................................£1,750 RANSOMES Mastiff 36" .............................................£1,500 SAXON Triple petrol eng, 3 belt driven cylinders ..........£1,500 10" heads to fit Toro LT range .....................................£1,500 TEAM Vixon 140L, 3m boom......................................£1,295 DENNIS Autorake Mk4 ...............................................£1,250 DENNIS D054/6 Sorrel roller casette ..........................£1,000 AMAZONE E + S 750 spreader ..................................£1,000 STIGA 3084H Estate, 2014, 84cm cutting deck .............£995 1.25 trailer ....................................................................£950 NEW turf wheels & tyres ...............................................£944 VICON PS225 fert spreader, man control .......................£750 CHARTER HOUSE Rapid Core 1.3m vert aerator............£750 GREENTEX vibrating rollers, to fit JD2500 Greens mower ..........................................................................£750 RANSOMES Supergreen cylinder ..................................£600 DENNIS Turfman...........................................................£600 KUBOTA Turf wheels to fit B2650 ..................................£500

81032397 71027147 71022846 71025863 81032219 71030278 71030279 11031509 71026761 71031410 71016000 71031269 71023340 71029691 41031951 71032127 11031115 71023457 71031159 71032250 61031130 71023455 71031934 71031934 71032034 71032174 71029756 81031391 71032331 71021409 81032145 71029695 71027859 71030859 41023335 81032144 71032268 81032142 71032272 81029072 71029694 71029693 71031935

HEDGECUTTERS

McCONNEL PA7070T, Revolution control & EDS 1.2m multicut flail head c/w HD f/& r/flaps.T flails, debris blower (integral) warning arrow ................................£15,500 McCONNEL PA5565, 2016, 1.2m head ....................£15,250 McCONNEL PA6577T, 2015, T flails, Revolution Controls ...................................................................£14,750 McCONNEL PA65T, 2009, 1.2m head.......................£10,500 McCONNEL PA6500T, 2005, requires axle brkts .........£9,500 McCONNEL PA58, 2011, cable control, 1.2m multicut head, f/& r/flaps .........................................................£9,500 BOMFORD Kestrel Evo, 2012, cable controls..............£7,350 SPEARHEAD Twiga 645T,2004, 1.2m head.................£4,750 McCONNEL PA500 c/w 1.5m head & competition flails, 1997.................................................................£4,850 BOMFORD Bushmaster 580 c/w boot flails, 1.2m head LH cut works from tractor spools s/n 1211K ......£2,500 BOMFORD LR16 3pt linkage mtd c/w cable controls ..£1,750

31032058 41031440 61030633 41032364 31031119

Buy and sell online — www.farmads.co.uk

HONDA TRX250 TE 2wd ATV .....................................£2,500 31032531 NEW HOLLAND CR 9.80, 2018, 35' VariFeed,900/60 R32s, Smartsteer chopper, chaff, Shelbourne trailer, BALE WRAPPERS yield & moisture, 563 & 422hrs...................................... POA 11032074 TAARUP 7664 twin arm rnd & square bale wrapper, NEW HOLLAND CR 8.80, 30' VariFeed, 800/70 R38s, 2005 Pro Wrap, bale count 30100 ..............................£9,000 41031697 chopper, chaff, yield & moisture, 495 & 371hrs .............. POA KUHN SW1604, 2012, trld, fully automatic, remote NEW HOLLAND CX 8.70 Elevation, 2017, 22' VariFeed, kit, stationary & trld actions, rnd & small square bales, 800/70 R38s, chopper, chaff, yield & moisture, flip 21000 bales...............................................................£8,500 61031786 spout, Shelbourne trailer, 792 & 675hrs.......................... POA 61031871 MCHALE 991 LBER,2002, 56000 bales ......................£4,500 31032046 NEW HOLLAND CX 8080 Elevation, 2016, 25' KV 7558 rnd bale wrapper, 3pt linkage,750mm wrap ..£3,500 11031294 VariFeed, 800/70 R38s chopper, chaff, yield & TAYLOR 500mm wrapper, c/w Honda petrol hyd moisture, Shelbourne trailer, 756 & 675hrs ..................... POA 61031879 p/pack .......................................................................£2,000 11028228 NEW HOLLAND CR9080, 2012, self lev sieves, yield PARMITER TR66 rnd bale wrapper,750mm film, hyd & moisture meter, Intellisteer, straw chopper, chaff control ..........................................................................£950 41030650 spreader on 900/60xR38 & 600/65xR28c/w 30G 30' varifeed cutterbar(s/n 3099740052011) & SRE BALERS & HANDLERS transporter ..................................................................... POA 51032494 McHALE Fusion 3 Plus, 2017, combi net & film, crop NEW HOLLAND CX8070 c/w 22' header & single axle roller, 650 tyres, ISO CAN controls c/w camera, trailer, 710/70 R42,500/70 R24, 1223 eng hrs, 33000 bales.............................................................£37,000 91032148 918 threshing................................................................. POA 21032121 NEW HOLLAND BB9060 packer cutter, 2012 big NEW HOLLAND CX8080,2007, fixed sieve box, square baler, 80x90 with approx bale count 44,000 yieldmeter, straw chopper, chaff spreader,900/60xR32 bales........................................................................£36,000 41031714 & 600/65 s/n 3115800 12x R28 c/w 30' Varifeed NEW HOLLAND BB9080 Big Baler, 2011 c/w std feed, cutterbar & SRE transporter 2 elec vert knives s/n elec bale length & bale ejector 66000 bales, 710/40 30708423 reg YX08 FLR ................................................ POA 51032281 R22.5 BKT ...............................................................£34,950 41031571 NEW HOLLAND CX 8080 FS, 30' CLAAS 3200,2009, tandem axle, elec bale length, VariFeed,900/60-R32, 600/65-R28, chopper, Heuling moisture, hyd tailgate, rotor feeder ...........................£32,000 41032551 chaff spdr, Shelbourne trailer, Y&M, 2685 & 2121hrs ...... POA McHALE Fusion Vario, 48000 bales ..........................£29,500 11032138 NEW HOLLAND, 2015, 35' VariFeed header c/w 2 hyd NEW HOLLAND BB950,2002, Big Baler, 120x70 size side knives, c/w Shelbourne steering trailer .................... POA 21029684 2002, S/no.204278023 68000 bales, single axle on 700/45-22.5 tyres std packer model.........................£16,950 41032043 EXCAVATORS/CONSTRUCTION KUBOTA KX080-4, 2015, 2 buckets, 2100hrs...........£28,500 61032032 NEW HOLLAND RB150 Superfeed, 2014, bale count 16000 approx ..........................................................£15,000 31025318 TAKEUCHI TB125, 2008, 6000hrs, Pro Lock & 3 buckets ....................................................................... POA 71032598 NEW HOLLAND BB940 80x90 square baler, single axle, 2000, approx 70,000 bales ..............................£13,000 21031605 TAKEUCHI TB230, 2015 c/w hitch, 12" 24" digging buckets & 48" ditching bucket, 2294hrs, rubber JOHN DEERE 684, 2012 netwrap, bale kicker, tracks ......................................................................£17,950 11032622 500/50x17 wheels, 2m pick up, 25100 bales, crop roller, rotorfeeder, no brakes .....................................£12,500 11032081 TAKEUCHI TB145,2008, 4521hrs.............................£16,500 61030193 NEW HOLLAND BR7060, 2012,25000 bales ............£12,500 31030179 AUSA 6t swivel dumper model D600 APG s/n 64073886, 2016, 1150hrs .................................£16,500 41032294 JOHN DEERE 592 rnd baler, 2009, wide p/u, 19,000 bales........................................................................£11,950 61029706 FERTILISER SPREADERS VICON RV2160 rotor feeder, approx 40,000 bales ......£9,995 11031717 SULKY X40, 2014, GPS, hopper cover, 3000L ............£9,500 21032468 WELGER RP535 rnd baler, 2008, wide p/u, std control SULKY DPX Magnum 4 bag hopper, fldg cover, box ............................................................................£8,950 31027595 lights, 28-36m vanes .................................................£3,200 91031153 NEW HOLLAND BR740 AEF,2004, rotor feeder, approx TEAGLE SX3000, 2010, 1900L cap, fldg hopper cover, 35000 bales...............................................................£8,000 21032139 w/width 6-24m, centrelift boarder spreader, NEW HOLLAND BR7060, hyd reverser, 2009 ..............£7,500 31027455 road lights..................................................................£2,950 61028752 LELY Welger RP520, 2002, rotor feeder, 22000 bales .£6,250 21031622 SULKY DPX Expert, 2800L, hyd shut off, no cover ......£1,975 11029563 NEW HOLLAND BR750 rnd baler, Crop Cutter,2003, AMAZONE ZA-X 1402,2008, Perfect, hyd shut off, twin bale count 35679, 480/45xR17 wheels ......................£5,950 11030881 disc, 2 bag hopper .....................................................£1,850 91032387 VICON Rotaflow,2008, twin disc, hyd shut off, RS-C BEDDERS & FEEDERS model, good vanes, working order.................................£950 21026409 KUHN 1270 tub feeder, 2003 single auger tub feeder, f/cross elevator, single axle, weigher............................... POA 21032476 AMAZONE ZA-OC, 1200L, twin disc, hyd shut off ..........£450 21026982 HAYBUSTER H1000 tub grinder, 2014 ......................£24,950 41029373 FORAGE HARVESTERS & PICK UP KUHN EuroMix 1270 vert diet feeder, 2015 c/w single WAGONS auger, elec controls & weighing (KDW 341 box), POTTINGER Torro 5700, 2013, Powermatic pick up f/right elevator, r/left door, w/a PTO on 400/60-15.5 wheels .....................................................................£10,750 41032400 wagon c/w autocut steering axle & Nokian 710/45 R22.5 STRAUTMANN 17 twin tub, 2011, c/w f/conveyor & r/door ........................................................................£7,500 41026649 tyres ........................................................................£35,000 41031324 STRAUTMANN Vitesse 3101 Super VT, 2011, forage KVERNELAND 853 Pro, trld, side discharge, swivel chute, hyd back door, road lights ................................£8,250 61029437 wagon, r/steering axle, chain drive pick up, load space KUHN 1070 diet feeder, 2007, c/w side elevator .........£7,950 41029115 lights, hyd s/d/bar, 560/45R22.5 flotation tyres.........£19,000 11031780 JF FCT955 trld forageharvester, 2011 c/w r/hitch, KING SD6E straw bedder, 2008 c/w top/swivel chute, side chute, elec controls, 11.5/80-15.3 wheels...........£6,500 41028306 spout .........................................................................£9,950 21031472 POTTINGER MEX 6 trld forager...................................£5,750 21030143 TEAGLE Tomahawk 8500, 2012, trld straw/silage bedder c/w swivel spout.............................................£5,450 11025985 GARDEN MOWERS & GROUNDCARE KUHN 3560 Primore, trld straw & silage bedder/feeder, WESSEX RMX240 roller, 2017 c/w mulching 2007, elec controls, top & side chute .........................£4,750 41029777 blades............................................................................ POA 81031242 KUHN Primor 2060 straw bedder, 2010, mtd, swivel TORO 3300 Workman truck ........................................... POA 81030855 chute .........................................................................£3,750 11032384 TORO 3100,2000........................................................... POA 71028156 BELA/STRAW bedder, 2002, c/w swivel chute ............£2,750 41024619 KUBOTA W821R pedestrian ........................................... POA 71025215 HI SPEC Mix Max 16, diet feeder c/w Digistar EZ3200 JOHN DEERE 8800 rotary ..........................................£6,000 71032572 weigher & lefthand discharge .....................................£2,500 41032293 TORO LT3340 Triple c/w 10" 6 blade heads, road TEAGLE 808S bale shredder, 2003 .............................£2,650 31029598 lights & beacon ........................................................£19,000 71032625 TEAGLE Tomahawk 8080,2007, trld bedder, 360o TORO LT3340 Triple c/w 10" 6 blade heads, road chute, electronic controls, twin spd gearbox ...............£2,000 91030247 lights & beacon ........................................................£19,000 71032626 TORO LT3340 Triple c/w 10" 6 blade heads, road COMBINES lights & beacon ........................................................£19,000 71032627 EX DEMO NEW HOLLAND CR 9.90, 35' VariFeed, 24" TORO LT3340 Triple c/w 10" 6 blade heads, road Terraglide trax, Intellisteer Optispread, Intellisense, lights & beacon ........................................................£19,000 71032628 Ziegler trailer, 103 eng & 65 thresh hrs ........................... POA TORO LT-F3000 Triple flail c/w road lighting & EX DEMO NEW HOLLAND CR 8.90, 30' VariFeed, beacon ....................................................................£25,000 71032629 800/70 R38s, Intellisteer, Intellisense, chopper, chaff TORO LT-F3000 Triple flail c/w road lighting & spreaders, Cochet trailer, 339 & 240hrs.......................... POA beacon ....................................................................£25,000 71032630 NEW HOLLAND CR 8.90, 2019, 30' VariFeed, 800/70 D109TT Scarifer Cassette, 2mm tungsten tipped R38s, Intellisteer, 4wd, Intellisense, chopper, chaff, for FT610 ......................................................................£450 71032701 Cochet trailer, 185 & 139hrs (on farm, York) ................... POA

31029837 61028170 41032042 41031809 41030636 41031492

HANDLERS & ATTACHMENTS

MANITOU MLT737-130 PS, 2017, Elite, CRC, a/c, p/ shift, 1663hrs ..........................................................£54,000 MANITOU MLT741T LSU 120PS Elite, 3000hrs, c/w hyd locking, Manitou h/stock, PUH, new set tyres, CRC, a/c 2016 .........................................................£48,000 MANITOU MLT735 PS, 2015, 3605hrs, new tyres ....£45,000 MANITOU MLT741PS, 2014 c/w hyd locking, CRC, a/c, PUH, boom lights & tool box, 460/70xR24 new tyres, warranty up to 3000hrs, approx 2438hrs. .......£41,500 MANITOU MLT627T EV 24, 2014, c/w CRC, a/seat, 2700hrs, tyres 30%..................................................£39,950 MANITOU MLT840, 2011 c/w pallet forks, a/c, hyd locking, 460/70R24 .................................................£39,950

61030076 61027754 61029690 11024219 21029609 21031166

Please call Jim Nash on 07734 550400 or David Hirst on 07792 927432 or email jim@hallmarktractors.com January 2020 www.farmads.co.uk 233

fg_class_jan_20.indd 233

12/12/2019 11:39

Hallmark Tractors Russells (Kirbymoorside) Ltd 69088

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

MACHINERY FOR SALE HANDLERS & ATTACHMENTS (cont)

MANITOU MLT735 Elite, 2014 LSU 120 p/shift, CRC susp, PUH, hyd locking, Manitou h/stock, a/OCN, a/ seat, new set of 24" tyres, approx 4325hrs ...............£37,500 MANITOU MLT634T LSU 120PS, 2015 Elite, c/w hyd locking .....................................................................£35,950 MANITOU MLT634T, 2015 LSU 120PS Elite, c/w hyd locking .....................................................................£35,000 MANITOU MLT735T, 2014, LSU 120 PS, Deutz eng, 4750hrs, PUH,hand throttle, a/c, a/seat, tyres 50% ...£32,000 MANITOU MLT735T, 2011, p/shift, a/c, hyd locking, PUH, CRC, a/seat, pallet forks, 460/70 R24 @70%, 4604hrs, Perkins eng ...............................................£32,000 MANITOU MLT634T 120PS, 120 LSU PS, CRC, JSM joystick, a/seat, boom w/lights, a/c, hyd locking, v tidy, tyres @15%, approx 3700hrs ..................................£28,000 MANITOU MLT735T, 2012, LSU 120 PS, Elite c/w hyd locking, new tyres. ...................................................£27,000 MANITOU MLT627T,2008, Mono Ultra, 24" c/w p/tines, tyres 20%, v tidy, approx 4500hrs ............................£24,000 MANITOU MLT627T EV 24,2007, approx 4700hrs, hyd locking, a/seat, a/c, evo joystick, RDS Weighlog 200..........................................................................£24,500 MANITOU MLT741T, 120 LSU PS, a/seat, boom lights, extra beacons, 50% tyres, approx 7000hrs ...............£22,000 MANITOU MLT730 ...................................................£15,000 MANITOU CD25P masted fork truck, 2006, 4600hrs, triplex mast 4.5m 2500kg, sideshift............................£7,250 JCB patch plainer to fit skid steer, 2016 ......................£6,500 VOLVO patch plainer to fit skid steer, 2012..................£6,500 SAMUK RD30 RW1B masted fork truck,2008, 5m triplex mast sideshift 5' free lift, hrs 6474, correct @ 1 July f/tyres 28/9x15 r/tyres 6.5x10 not available till Christmas ..................................................................£4,750 VOLVO snow plough to fit skid steer, 2012..................£1,650 CHERRY 7', 10 tines on fork, 6 tines on grab on New Holland brkts ......................................................£1,500 ALO 230SE Silocut sheargrab,2009 c/w Manitou brkts£1,500 SLEWTIC 6' sheargrab, 2016, 14 tine .........................£1,500 7FT muck fork & grab, 2015, euro brkts & pipes ........£1,200 CB01 bag lifter, pin & cone brkts ................................£1,000 SLEWTIC 4' sheargrab ..................................................£800 GENERAL purpose bucket, v little used, good blade, euro brkts .....................................................................£600 MX BRU150, 5' general purpose bucket, euro brkts........£580 PARMITER 4'6" Sheargrab c/w Matbro brkts..................£495 SINGLE bale spike, 2018, 3pt linkage ............................£300

61022638 31030165 11031057 21031463 11028344 21023157 31027876 21025928

MURSKA 350 S2 grain rolling mill c/w protein/mineral hopper & auger system, long PTO shaft......................£5,000 OPICO 6m grass harrow c/w 8mm tines ....................£2,750 OPICO 6m hyd folding grass harrow, 2010 c/w 8mm tines ..........................................................................£2,500 BROWNS 3m Slitmaster grassland aerator c/w grass harrow .......................................................................£2,000 ALBUTT B100/9PP 9' buckrake, s/n 17890 2005........£1,950 IAE Chieftain suckler crush ........................................£1,900 ALVAN BLANCH RV280T, 2014, bare roller mill, no PTO shaft...................................................................£1,750 HYUNDAI GPDHY8000SELR generator, 3ph long run ..............................................................£1,600 STOCKS Fan Jet Pro 65 broadcaster, 2017 c/w ATV ﬁtting kit & brkts ............................................................£900 FAN JET Mini broadcaster, variable spd & feed, 110 control, large & small rollers & spacers .........................£750 SWALEDALE trld snacker, man controls, ATV tyres ..........450

SPRAYERS

11031672

KELLANDS 2700 Agribuggy, 2012, 24m boom, auto steer, on 560/60R22.5 tyres & 12.4x36 r/crops ........£59,950 HARDI Commander HPZ, 2014, 4500L, axle steering, HC9500 controller, susp, prime flow, auto wash/auto fill, auto height, 18.4 tyres ........................................£28,500 AMAZONE UX3200, 2011, trld, special spec, 24m booms .....................................................................£24,000 RAU Ikarus A38 trld,2008 c/w 24m booms, tracking d/bar, fresh water tank, induction hopper, section shut off, rate controller, triple nozzles, r/crops wheels .......£12,000 BARGAM 24m 1600L, mtd sprayer, 24m booms, hyd fldg, stainless lines, elec controls ...............................£4,500

41032504

TANKERS & MUCK SPREADERS

11031742 41031005 41029974 51032585 41031539 11032565

61032266 31030570 91032587

PLOUGH & PRESSES 91030095 21023310 31031167 11031443 41030642 41030643

11031445 41030644 61025441 41028290 41032291 21031624 61030961 51021771 61022632 91032459 41032297 11025593

MOWERS & HAY MACHINERY

MCHALE R68-78 rake, 2018, 6.8m-7.8m hyd width, flotations, spare wheel, tandem wheels on rotors ......£16,000 POTTINGER Novacat, 307 TED, 2018, 3m w/width, semi-mtd side pull, mo/co, wear skids. ....................£13,500 TAARUP TA9178C (HD)4 wheels under rotor, 11 tines/ rotor, swivel h/stock, w/width 7-8m, transport wheels 10.00/75x15 ............................................................£13,500 McHALE F3100, 2017, mo/co ..................................£11,750 McHALE R3100, 2018, mo/co .................................£12,250 McHALE R3100 r/mtd mo/co .....................................£8,500 KUHN GF8702 8 rotor tedder, 2013, s/n B0052 c/w lights & fenceline adj, vgc...........................................£7,500 KUHN GF7601 MH tedder, 8 rotors, 5 tines/rotor ........£7,250 POTTINGER Top 612 twin rotor rake, 2014, 5.9m w/ width, mtd. ................................................................£6,500 POTTINGER 701A,2004 twin rotor rake, multiast wheels .......................................................................£5,950 POTTINGER HIT 6.80 6 rotor tedder, 7.8m w/width.....£5,750 KVERNELAND TA4232 LT mo/co c/w spreading head & swivel hitch ................................................................£5,500 KUHN GMD700 mtd, 2014 .........................................£4,500 GIRAFFA 210 offset flail topper, 2014 .........................£3,870 CLAAS 3050C Disco r/mtd mo/co 2004 .....................£3,950 TEAGLE PARK SB 1.1m mulcher c/whammer flails & std spec, 2018...........................................................£3,500 KUHN G5202 tedder,2009, 5m spread, 4 rotors, 7 tines/rotor ..................................................................£3,500 LELY Optima 240 mo/co 1994 ....................................£3,250 LELY 240 Splendimo, 2007, mtd mo/co.....................£2,750 McCONNEL Topper 9, shaft drive with shearbolt PTO, f/or r/mtd, twin rotors, 2.74m cut, Cat 2, min 50hp .....£1,850 FLEMING Top 8S 8F topper 2007, side mtd ................£1,250 McCONNEL PT9 topper ..............................................£1,600 McCONNEL Topper 9 needs rubber couplings & blades........................................................................£1,450 McCONNEL PT180 6' topper, 2013.............................£1,150

OTHER MACHINERY

21030707 41031918 11031916 91030348 91030349 61030883 41032286 11031021 61029846 41031538 31031146 11030882 41029890 21027443 51029771 51032060 11029980 41032288 51032356 41031661 41027751 21026443 41031441 21031530

SIMBA 3.3M Cultipress, 2009, rigid tines, DD ring packer .......................................................................£9,500 SIMBA hyd ﬂdg press c/w 2 row trld & leading tines...£3,000 DALBO Levelﬂex 3m, 2013, f/mtd press c/w cast rings & steering ..................................................................£2,850 SUMO f/5' packer roller c/w f/tines .............................£2,500 DOWDESWELL DP7 D2 5F rev plough ........................£1,500 MICHAEL MOORE 4.5m trld press..............................£1,600 1.5M f/press c/w spring tine bar. ................................£1,350

21031542 41027995 41032045 21031398 41032478 41025577 11029572

POWER HARROWS & SEED DRILLS – SYSTEM DRILLS VADERSTAD RDA600S seed drill, 2011, approx 1800ha, IDC, std control station, pre-ems, track erads, spare wheel. ............................................................£47,000 VADERSTAD RDA600S seed drill, 2015, std d/bar, track erads, std system disc, 5850ha, offset wheels, new wearing metal ...................................................£46,500 VADERSTAD RDA600S, 2005, cleated tyres offset, 4239ha @13th Dec, rigid track erads, system disc ..£19,950 VADERSTAD RD300S box drill 2005 c/w system disc, press wheels, pre-ems, track erads, approx 9000 acres ...................................................£14,500 VADERSTAD RDA400S 5028ha,2006, system disc, no pivot packer ........................................................£13,000 GASPARDO 300, 2013, 6 row maize drill c/w microgranular kit ......................................................£12,950 KUHN HR3003 c/w fast fit tines,2008, maxipacker roller, LC302 drill with side markers, 3 row coulters, steps & fllwg harrow 3000ha, control box, good condition....................................................................£9,500 KRM 4m drill c/w Lemken Zirkon 10-400 p/harrow, notched rubber ring packer, track erads, clod bar, 3 or 4 tramliner, bout markers, variable rate adj, half width shut off, fllwg harrow ...............................................£10,000 AMAZONE RP 402 p/harrow c/w AD-P 402 4m drill with disc coulters .......................................................£9,750 AMAZONE AD 303 combi box drill, land wheel driven, 24 rows, 2 rows Suffolk coulters, bout & pre-ems, c/w KRM Magnum 3000 p/harrow, lev board, packer roller, quick fit tines, 12 rotors..............................................£7,250 SULKY SPI 3m drill combi c/w Maschio p/harrow, new tines ..........................................................................£4,250 VADERSTAD RDA 400F c/w system disc, control box & std spec .................................................................£5,000 KRM TI305 4m Drillmate, hyd fldg, Suffolk coulters, fllwg harrow ...............................................................£3,500 KRM H.94 p/harrow, 3m, crumbler roller ....................£2,100 RABE PKE 300 packer roller, bolt on tines...................£2,500 MASCHIO DM3.5m p/harrow .....................................£1,500

91028528 11032195 11029053 31023462 31027688 51029826

41027541

31030569 51030326

11032191 21032482 11031453 21024120 11030927 21026760 31031939

ROLLS

WALTER WATSON 10' x 36” ballast roll c/w end tow kit, 2015 ....................................................................£3,950 TWOSE 6.3m horiz ﬂdg, 1995, c/w Cambridge 24" rings. ...................................................................£3,875 VADERSTAD RX620 Rollex roller, 2011.......................£3,750 FLEXICOIL 6.3m Cambridge rolls ...............................£2,750 WALTER WATSON 2.45m 36" roller c/w r/hyd wheel kit ....................................................................£2,500 EDLINGTON 6m Cambridge roll, vert fold, plain rings ..........................................................................£2,250

41029735 41031882 21031845 61031247 41032428 21030735

SHELBOURNE 2200 Power Spread, 2009, Pro model, wide angle PTO, rev auger drive, man anti bridge ......£10,500 K2 D/10 muck spreader, 18.4 R34 wheels, slurry door, wide angle PTO ..........................................................£8,000 NC 2050 slurry tanker, 2015, single axle recessed tanker c/w800/65x32 high load Russian wheels. ........£8,500 HI SPEC 1000 barrel spreader, new rotor, big tyres .....£2,000

41029614 61030382 31031604 21031529 11031799

91029445 31032332 31032381 91029699

TILLAGE

SUMO Trio 3m, 2019c/w auto reset legs ..................£16,800 41032084 NEW CULTIVATING SOLUTIONS RLM400 linkage mtd Rapidlift, telescopic c/w electro dirverter valve, clevis hitch & depth wheels................................................£12,300 41021307 McCONNEL Shakaerator, 2017, 3m 7 leg c/w toothed packer .......................................................................£6,250 41031599

TRAILERS

MARSHALL QM12 silage trailer, 2017, floatation tyres ........................................................................£13,950 MARSHALL 14t, 2000, a/brakes, oil brakes, hyd r/door, s/d/bar, on super singles 385/65R22.5 wheels ...........£7,500 TRIFFITT 14t, 1997 ...................................................£7,250 TRIFFITT 14t, 1997 ...................................................£7,250 TRIFFITT 14t, super single tyres, d/a hyd door, grain chute, hyd brakes, s/d/bar ..........................................£7,000 BAILEY 10t TAG, std d/bar, man door, grain chute, super singles, 385/65R22.5 .......................................£6,500 BAILEY 8t, 2014, single axle low loader trailer, super singles, 2014 .............................................................£5,500 WEST 10t silage, 2003, s/d/bar ..................................£3,750 MARSTON Ace FF11, 1989, mono hyd tipping, c/w super single tyres, grain chute & f/ladder ....................£4,650 TRIFFITT 10/11t mono,2000, c/w silage sides, tandem axle, 435/50x19.5, grain chute, up & over door ..........£4,500 IFOR WILLIAMS DP14 c.w sheep decks ....................£3,950 IFOR WILLIAMS DP120 livestock, 2011, demount. ....£3,750 IFOR WILLIAMS livestock, 12'x6'6", tri axle, alloy floor, spr axle, sheep decks, cattle gate, 186/60xR12C wheels, 2006 .............................................................£3,750 IFOR WILLIAMS TA510G, 2000, c/w sheep decks......£3,550 EASTERBY 8t std d/bar, man door, small wheels .........£3,000 MARSHALL MS8, 8t, twin 6 stud axle, lights up & over mesh door solid axles(ideal horse muck trailer) ..........£2,750 MARSTON 10t, new floor, man back door, twin axle ....£2,300 IFOR WILLIAMS TA510G livestock, one partition gate ...........................................................................£2,300 GRAHAM EDWARDS 12'x6' livestock, tri-axle, no decks, dividing gate, 195/55xR10 wheels, demount....£1,950 IFOR WILLIAMS LM126G, 12' flatbed, c/w sides, ladder rack, ramps, recent tyres .................................£1,800 IFOR WILLIAMS LM126G 12'x6' flatbed trailer, c/w drop sides, spare wheel & ramps ...............................£1,750 GRAHAM EDWARDS DM14T tri axle, 14', no decks ....£1,400 LEWIS 2t dropside single axle ....................................£1,500 CHALLENGER plant trailer ..........................................£1,400 IFOR WILLIAMS tandem axle, 1989, 10'x5'3", steel/ wood ramps, 2600kg cap, 155/70x12 tyres 1989 ......£1,350 LOW loader, hyd lift ....................................................£1,250 INDESPENSION plant, 8'x4', twin axle, mesh floor, full width tail door, lights .....................................................£995

41029896 41029225 31032395 31032396 21032467 61031307 21031397 41027308 51031255 21031471 61031716 61030662 11030698 41032374 61031308 41029643 61032088 21031246 11032506 91030384 21032312 11031656 41032306 41031663 11030786 31031938 21030625

WHEELS & TYRES

CONTINENTAL 540/65 R38 tyres, 440/65 R28 tyres only 300hrs use. ........................................................£3,250 CONTINENTAL tyres rears 650/65R42 50% (thorn damage in one needs repair) & 540/65R2850-60% good (slightly damaged needs repair) .........................£2,000 STOCKS dual wheels 580/85 R46 tyres & rims ..........£1,500 380/85R28 460/85R38 30% ......................................£1,350 ALLIANCE tyres 480/70 R38 @80% 420/70 R24 @70% ...................................................£1,250

41031600 41032520 61031789 21029834 41031499

Please call Jim Nash on 07734 550400 or David Hirst on 07792 927432 or email jim@hallmarktractors.com Plus loads more stock – please view our websites www.hallmarktractors.com & www.russells.uk.com 234 www.farmads.co.uk January 2020

fg_class_jan_20.indd 234

12/12/2019 11:40

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

Manter SAB Sewing System

CTM Rockstars coming available:

Manter 25/6 Weigher Vertical Eject Box Tipper

All of our LED units come with a one metre lead and a 13 amp plug

8ft & 6ft Star Cleaner with Clod Rollers

Lights can be leap frogged Available in sizes 5ft to 12ft

CTM 1505 Rockstar 2014 refurbed 4 web machine, completely overhauled CTM 1706 Rockstar 2 ex-demo Web-star-web-star web configuration, self-levelling & reset

BOOK YOUR 2020 DEMO NOW Call Karl today on 07919 916918 for info.

BAG STITCHER SYSTEMS WEIGHING & PALLETISING EQUIPMENT GRADING & HANDLING EQUIPMENT PLC PROGRAMMING SERVICE & REPAIRS

01354 638222

info@agrimech.co.uk www.agrimech.co.uk

01621 828689 www.kjengineering.com CHOICE of Reekie 5174 & Scanstone 5215 destoners, can be sold as seen or rebuilt to your requirements, large quantity of spares available, contact for details. M Anderson Tel 07880 518867 (Norfolk)

37-68987

Potato • Onion • Carrot • Parsnip Red Beet • Veg handling equipment Graders (both screen & lift roller) hopper cleaners/graders, brushes, box & big bag fillers/tippers, etc Field equipment Vegetable transplanters, drills, top lifters, toppers, hook tine cultivators Grimme DL/GZ/GT/SE harvesters

Payment prior to collection • Any condition considered Call Lukasz on

07512 821421

K53 – Europe’s best selling agri box rotator for any handler

or visit our website

www.machinerywanted.co.uk

K80 forward tippler gentle & quick box tipping Very adaptable & easy to operate

GRIMME CT6000 2 bed Combitiller, good machine. £5,500 ono. G Blandford Tel 07973 424473 (Hereford)

Pellcroft Engineering Ltd Coningsby, Lincs

01526 342466

Sprayers & Fertiliser Spreaders

Tel: 01789 731365 www.dkelectronics.co.uk

MILL potato planter. £150. J Ramsey Tel 01653 628366 (N Yorks) BREAKING Scanstone, Reekie & Underhaug destoners, various Scanstone 1700 webs available, call for details. M Anderson Tel 07880 518867 (Norfolk) RANSOMES 2 row potato hoover. C Eagle Tel 01603 759678 (Norfolk)

PRECISION FARMING TRIMBLE FM750 screen, no antenna. Sensible offers. S Bartle Tel 07884 238552 (Notts) LARGE hydraulic ram, ideal for making a log splitter. £75 no VAT. D Ivens Tel 07969 877834 (Northants)

TRIMBLE TDL450L radio/repeater, new. £900. S Bartle Tel 07884 238552 (Notts)

SITUATIONS VACANT FULL-TIME tractor driver/general farmworker required by RA Fison & Sons, Heath Farm, Fulbourn Cambridge to join our team on the 1700-acre farm, PA1/PA2 & forklift an advantage, for details email nick. ﬁson@hotmail.com. N Fison Tel 07855 090051 (Cambs)

STOCKS seeder ground radar, new. £300. S Bartle Tel 07884 238552 (Notts) HYDRAULIC ram 4' long. £50. G Meadows Tel 07951 111182/01728 660577 (Suffolk) SUMO Trio leg protectors, 30 available. £4 each. S Bartle Tel 07884 238552 (Notts)

37-69191

www.broadwaterltd.com

REEKIE Space Setter potato planter, c/w shaping hood. £500 ono. F Taylor Tel 07785 935407 (Notts)

MANUALS als 1000s of manu in stock for all es types of machin

tact Please con info us for more

www.sps-parts.co.uk Contact Simon Scott on

07789 793721 Follow us on Facebook & Twitter for the latest new products

SPARE PARTS

01728 723221 e: broadwatermach@yahoo.co.uk

HEAD ROTATINGFA LD IE E H IN T

Mowers & Foragers

David King Electronics

TOPCON AG1 4 receiver with X25 console, hardly used, good condition, buyer can collect from North Norfolk or I am happy to liaise with buyer's courier. £7,500 ono. M Thompson Tel 01485 210261 (Norfolk)

Machinery Ltd

K53Z Range is built for yearround demanding rotating tasks

Balers & Wrappers

TRACTOR PARTS & MANUALS

Broadwater

Marian Teodorczyk

Grain & Precision Drills

Diet Feeder Weighing Systems

2005 Standen Pearson Enterprise StarFlow ProClean wheel drive, EasiPic soft drop elevator, web oscillator, used this season. £22,500+VAT ono. J Mann Tel 07852 981855 (Lincs)

FOR EXPORT By Teo

CHITTING CRATES

RICHARD Larrington ‘Guardian’ box ﬁlling trailer, 8 box capacity, air & hydraulic brakes, 2008. £13,000 ono. F Taylor Tel 07785 935407 (Notts)

BOX ROTATORS & FORWARD TIPPLERS

WANTED

karl@ctmrcs.co.uk

Tel. 01485 520355

BLACKBURN

Material Handler Joysticks & SLI's

Buy and sell online — www.farmads.co.uk

Free standing or hanging

TITAN Palletising System

Options:

CTM 1506 Rockstar 2 ex-demo Web-star-web-star web configuration, powered cleaning web

Tractor & Combine Controls

46-69115

POTATO CHITTING LIGHTS

3ft Grader receiving hopper, star pre-cleaner, grading module, inspection table, fully refurbished 37-68961

37-69117

USED MACHINERY

ELECTRONIC CONTROLS REPAIRED 46-68985

37-69205

RICHARD Larrington box loading trailer, 8 box capacity, hydraulic brakes, 2004. £9,000 ono. F Taylor Tel 07785 935407 (Notts) RICHARD Larrington 'Guardian' box ﬁlling trailer, 8 box capacity, hydraulic brakes, 2006. £12,000 ono. F Taylor Tel 07785 935407 (Notts) GRIMME GTM1700 potato harvester, 2008, c/w twin multi-sep, picking off table & wheel drive. £25,000 ono. F Taylor Tel 07785 935407 (Notts) STANDEN Triple bedtiller, c/w ridging bodies. £5,500 ono. F Taylor Tel 07785 935407 (Notts)

37-68841

MILL potato planter. £150. J Ramsey Tel 01653 628366 (N Yorks)

POTATO EQUIPMENT (cont)

Buy and sell online

www.farmads.co.uk

SALES, parts & service for Bonhill/ Fortschritt muck spreaders, combines, etc. Contact Ian Leech, Bonhill-Leech, 07860 206348 (Norfolk)

January 2020 www.farmads.co.uk 235

fg_class_jan_20.indd 235

13/12/2019 10:50

£40,000

2015, MERLO 42.7 Turbo Farmer Loadall, 40kph, Pallet Forks, Boom Suspension, Pickup Hitch, Trailer Brakes, 1874 hours.

Call Andrew Whiteley: 07774 296382

Call Richard Cross: 07860 429947

£23,900

£47,500

2011, JCB 515/40 Compact Tool Carrier & Forks Good condition 2773 Hours

2015, MF7618 D6 50kph, Front Axle & Cab Suspension, Pivoting Front Fenders, No Front Linkage, 380/85R28 &460/85R38 3250 Hours

Call Andrew Walker: 07827 773 605

Call Max Pinney: 07795 128281

£75,000

2010, CHALLENGER MT765C 30” Belts, Wide Drivers and Mid Wheels, 8 Idler Weights, Good Condition. 5509 Engine Hours Call Chris Batcheler: 07584 631399

£79,000

2016, EUROLINER 28,000L New & Unused C/W Vogelsang Lobepump, Vredestein 650/65R30 Flotation Trac Wheel Equip, Adr Axle upgrade with 420X200 Brakes, Rear Led Work / Beacon/ Brake / Tail & High Level Road Lights Call Richard Cross: 07860 429947

£47,000

£63,550

2014, JCB 541/70 Pickup Hitch, Trailer Brakes, hyd locking Q Fit Carriage, Excellent Condition 3629 Hours

2018, JCB 531/70 AGS Bibload Hard surface 460/70R24 tyres, hyd Pin lock Q fit carriage , Front & Rear, Boom and hitch lights, auto reverse fan. 900 Hours

£55,000 2016, JCB TM320

460/70R24 Tyres Very Good Condition 3137 Hours

Call Dennis Hart: 07824 016116

Call Richard Cross: 07860 429947r adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Quis ipsum suspendisse ultrices gravida. Risus commodo viverra maecenas accumsan lacus vel facilisis.

Call Dennis Hart: 07824 016116

£76,500

2017, VALTRA T214D Sub Metre Autoguide with C3000 Screen, Cvt, 4 Spools, Front Linkage, Evo Seat, Auto Cab Suspension, 160L/ min Hydraulic, 600/75R38 & 600/65R28. 1750 Hours

£72,500

2015, FT720 Front Linkage, Front PTO, Climate Control, Super Comfort Seat, 600/65r28 &650/65R42 5759 Hours Call Marcus Bourne: 07774 296390

Call Max Pinney: 07795 128281

£69,500

2014, CHALLENGER MT765D 30” Tracks, 8 Idler weights, Debris Deflectors, Agi 4 Guidance Very Good Condition, 6370 Hours Call Marcus Bourne: 07774 296390

Search through more used tractors and machinery online at: Peacock.co.uk

£13,500

2014, TWIGA 655T HEDGE TRIMMER Arm and Head Float, Hydraulic Rolle, Good Condition

PEACOCK & BINNINGTON Call Marcus Bourne: 07774 296390

BRIGG: 01652 600200 | CORRINGHAM: 01427 838696 | HALSHAM: 01964 614233 LOUTH:01507 353500 | SELBY: 01757 700699 QUALITY USED MACHINER AT AFFORDABLE PRICES! SALES, SERVICE AND PARTS DEPOTS ACROSS LINCOLNSHIRE & YORKSHIRE

Bethel • Caernarfon • Gwynedd • LL55 3PS

FORD 4610 4wd, AP cab, wide tyres, 5900 hrs, c/w Trima 1992 power loader

NEW HOLLAND TD 5030 low hours, 13 reg, air con, 40k, TRIMA X36 power loader, mint condition

CASE IH PUMA 140 40K, 12 reg, multi controller range command, tyres at 75%, immaculate condition

NEW SOLIS 75 front weights, manual shuttle, wide tyres, excellent value

NEW KANE TRAILERS 4 ton & 10 ton in stock

JUST IN – MASSEY FERGUSON 3635 4wd, 2009, front linkage, power shuttle, very tidy

JUST IN – MASSEY FERGUSON 3065 2wd, M reg, golf course, very tidy

JUST IN – INTERNATIONAL 785 LP 2wd, taken in PX off local farm

JUST IN – POLARIS RANGER 1000 2015, full cab, low hours, very nice

JUST IN – KUBOTA STV 36 4wd, industrial tyres, HST, 1800hrs, 55 reg, very nice

JUST IN – JOHN DEERE 2140 2wd, SG2, 5400hrs, one owner from new, very tidy

JUST IN – JCB 8085 ECO 2011, rubber tracks, blade, offset, CV, QH, piped aux, very nice

JUST IN – JCB ECR48C 2013, rubber tracks, off set, QH, CV, piped, one owner, very nice

JUST IN – JCB 8030 2008, rubber tracks, offset, blade, QH, CV, piped

NEW CARTER T16 expanding u/c, 2 spd tracks, hyd QH, zero tail, fantastic value, Yanmar engine

NEW CARTER T18 full cab, expanding tracks, hyd QH, heater, radio, Yanmar engine, fantastic machine

HITACHI ZAXIS 26U 2017, 749hrs, zero tail, QH, green light, immaculate

JUST IN – HYUNDAI R27Z-9 2.7t, 2014, rubber tracks, blade, offset, CV, QH, piped

69411

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

£122,000

2015, MF9380 30FT Superflow Table, Side Knife, Yeild & Moisture Meter, 900/55R32 & 600/55-26.5, 1089 engine & 569 Rotor Hours.

t: 01248 670 643 • m: 07979 860 635 www.alwynthomastractors.co.uk please take a look – open 7 days

Check out our website - more tractors due in 236 www.farmads.co.uk January 2020

fg_class_jan_20.indd 236

12/12/2019 13:16

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

Tel: 0333 6000 670 sales@doubledaygroup.co.uk www.doubledaygroup.co.uk

The Doubleday Group Your local dealer for

Gregoire Besson HRWB9 7 furrow No8 mouldboards, depth wheel .............................£14,750

Kverneland LB85 6 furrow hydraulic vari-width, knock on points, skimmers, depth wheel (LB85-240-8) ............................£9,500

2008 Maschio DMR4000 power harrow clodboard, packer roller, rear drill linkage, immaculate condition off local fen farm........................£8,500

2019 Michelin 600/70R28 Machxbib, new tyres & rims, taken off a John Deere 6250R .....................£3,000

1998 Gregoire Besson RB71 5+1 furrow depth wheels & skimmers ......... £3,750

1998 Gregoire Besson RB7 6 furrow (5+1) manual furrow adjust, combi wheel ..............................£3,950

Lely 400-45 power harrow clodboard, flexicoil .................... £2,750

2014 Alpego RH400 power harrow clodboard, flexicoil, star cleaners ..............................£9,500

Maschio DMR30000 Erpice (2009) rubber star packer, clodboard, Lely combi-pneumatic Suffolk coulter drill, hydraulic markers ...................... £6,750

New Sulky HR3000.19 power harrow 190hp gearbox, track eradicators, levelling board, 550mm toothed packer, quick fit tines, 3yr gearbox & trough warranty ......................... £9,750

2014 Alpego DX600 hydraulic folding power harrow clodboard, packer roller, lights ........................................£14,000

1996 Kuhn HR4002 power harrow Venta Suffolk coulter drill...........£8,500

Stocks 520/85x38 Dual wheels 90% Mitas tyres & clamps .........£2,500

Dowdeswell DP4 4 furrow UCN bodies, rear disc, sword landslides, skimmers.......£1,550

Stocks 16.9x28 dual wheels Semperit tyres & clamps............... £950

2014 Gregoire Besson RB47 5 furrow (4+1) manual furrow width, skimmers, depth wheel, No8 mouldboards ..................... £9,750

Lely 350-45 power harrow crumbler .................................... £2,750

2013 Amazone Cirrus 3002 disc drill track eradicators, tyre packer, disc cultivator, press wheels, following harrow, pre emerge markers, Amatron+ control box, 1707 hectares ......£23,500

Buy and sell online — www.farmads.co.uk

30.5x32 Flotation wheels Russian radial tyres 60%, 8 stud, 400mm PCD..............................£2,500

28.1x26 Flotation wheels Rosava TR-301 tyres 8 stud bolt in centres .................£2,500

69147

Holbeach Tel: 01406 540 261

Kings Lynn Tel: 01553 617 666

Swineshead Tel: 01205 822 440

Holbeach St. John, Lincolnshire PE12 8SQ

Kings Lynn, Norfolk PE34 3EU

Station Road, Swineshead, Lincolnshire PE20 3PN

Vi sit ou m for r w ac m e hi or bs ne e ite ry

January 2020 www.farmads.co.uk 237

fg_class_jan_20.indd 237

12/12/2019 11:43

LATEST USED STOCK www.chandlersfe.co.uk

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900 KUBO TA

KUBOTA DIESEL TRACTOR

£105,000.00

RG635

2015 SUMMER CASHBACK CAMPAIGN ON

KUBO TA

£49,500.00

£57,500.00

Bi speed turn for tight turns and minimal damage to surfaces Twin wet-type disc brakes 2 speed rear PTO & 1 speed mid PTO

2009, 8750 Hrs Speed: 40Km/h 340 HP B2050/B2350/B2650/B3150 Track width: 25 Track %: 80 PTO Speed:NEW 1000

Upto 34km/h travel speed- Fastest travel speed in it’s class Easy to access bonnet and headlights for night-work

Bi speed turn for tight turns and minimal damage to surfaces Twin wet-type disc brakes Upto 34km/h travel speed- Fastest travel speed in it’s class

2009, 8033 Hrs Speed: 40Km/h 360 HP B2050/B2350/B2650/B3150 Track width: 30 Track %: 60 PTO Speed:NEW 1000 KUBO TA

KUBOTA 4WD DIESEL UTILITY VEHICLE

LESS THAN

1000 500

1500 1000 HOURS

HOURS

KUBOTA DIESEL TRACTOR

KATANA 85 FORAGE FROM

£77,500.00

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

312 & CARGO 4X/75

TA KUBO

Bi speed turn for tight turns and minimal damage to surfaces

FROM

LESS THAN

720

TA KUBO

Twin wet-type disc brakes

2 speed rear PTO & 1 speed mid PTO

Upto 34km/h travel speed- Fastest travel speed in it’s class

Bi speed turn for tight turns and minimal damage to surfaces

FROM

2 speed rear PTO & 1 speed mid PTO Upto 34km/h travel speed- Fastest travel speed in it’s class

FROM

NEW

FROM

KUBOTA DIESEL TRACTOR

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

936

TA KUBO

Twin wet-type disc brakes 2 speed rear PTO & 1 speed mid PTO Upto 34km/h travel speed- Fastest travel speed in it’s class

Bi speed turn for tight turns and minimal damage to surfaces

FROM

KUBO TA

Available with a panoramic, spacious factory fitted air-conditioned cab

FROM

KUBO TA

FROM

KUBOTA 4WD DIESEL UTILITY VEHICLE

Bi speed turn for tight turns and minimal damage to surfaces

KUBOTA 4WD DIESEL UTILITY VEHICLE

1500 1000 HOURS

£9,500.00

NEW FROM

KUBOTA DIESEL TRACTOR

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

2018, 69 Hrs, 29 HP Front tyre size: 13.6-16 Turf B2050/B2350/B2650/B3150 Rear tyre size: 26X12.00-12 Turf NEW 95% front tread 95% rear tread FROM

KUBO TA

TA KUBO

Upto 34km/h travel speed- Fastest travel speed in it’s class

Easy to access bonnet and headlights for night-work

Available with a panoramic, spacious factory fitted air-conditioned cab

2018, 750 Hrs, 90 HP PTO speed: 540/1000 B2050/B2350/B2650/B3150 Front tyre size: 340/85R28 90% Rear tyre size: 420/85R34 90%NEW

Bring more comfort and luxury to any task Powerful Kubota E-TVCS diesel engines: 21HP- 31HP Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

FROM

KUBO TA

Bring more comfort and luxury to any task Powerful Kubota E-TVCS diesel engines: 21HP- 31HP Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP HST transmission

2 speed rear PTO & 1 speed mid PTO

HOURS

£73,500.00

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP HST transmission

2 speed rear PTO & 1 speed mid PTO

FROM

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

HOURS

£66,500.00

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP HST transmission

TA KUBO

2 speed rear PTO & 1 speed mid PTO

HOURS

£74,500.00

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP HST transmission

TA KUBO

2 speed rear PTO & 1 speed mid PTO

2018, 1100 Hrs, 185 HP PTO speed: 540/1000 B2050/B2350/B2650/B3150 Front tyre size: 540/65R28 80% NEW Rear tyre size: 650/65R38 90%

Easy to access bonnet and headlights for night-work

Available with a panoramic, spacious factory fitted air-conditioned cab

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP Choices of Manual or HST transmissions Selectable 4WD Bi speed turn for tight turns and minimal damage to surfaces Mechanical/independent PTO, available with ROPS protection Easy to access bonnet and headlights for night-work Available with a panoramic, spacious factory fitted air-conditioned cab Fuel efficient, with noise and vibration kept to a minimum One piece hood for easy maintenance

£7,000.00

MANITOU MLT628 Year: 1996 Tyres: 460/70R24 Sanderson Brackets

Bring more comfort and luxury to any task

FROM

KUBO TA

£42,500.00

MANITOU MLT735 2012, 3500Kg Lift,120HP, 40KPH, 2200 Hours, Hydraulic Pinlock Headstock, Air Con, Boom Suspension

£20,990.00 2017 (67) 2.2 TDCI Limited Manual Double Cab 4WD 4DR 3,811 Miles

£15,490.00

ISUZU D-MAX

2016 (16) 2.5TD UTAH Auto Double Cab 4WD 4DR 34,400 Miles

KUBOTA DIESEL TRACTOR

Bring more comfort and luxury to any task

FROM

KUBO TA

£55,000.00

MANITOU MLT741 ELITE Year: 2016 4.1KG Lift, 6 Speed Powershift Transmission, 40kph, Tyres: 460/70r24 (70%)

2015 (65) 2.4 DI-D 4Life Manual Double Cab 4WD 4DR 35,049 Miles

£81,250.00

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP HST transmission

TA KUBO

Bi speed turn for tight turns and minimal damage to surfaces Twin wet-type disc brakes 2 speed rear PTO & 1 speed mid PTO

Upto 34km/h travel speed- Fastest travel speed in it’s class Easy to access bonnet and headlights for night-work Available with a panoramic, spacious factory fitted air-conditioned cab

KUBOTA DIESEL TRACTOR

Bring more comfort and luxury to any task

FROM

KUBO TA

Bring more comfort and luxury to any task

FROM

£23,950.00

TH220B

2009, 5700 Hrs MA5 Premium Spec, Hydraulic Hitch, Pallet Tines Tyres: 460/70R24

£12,490.00

MITSUBISHI L200

FROM

2019, 587 Hrs, 185 HP PTO speed: 540/1000 B2050/B2350/B2650/B3150 Front tyre size: 540/65R28 85% NEW Rear tyre size: 650/65R38 90%

Easy to access bonnet and headlights for night-work

KUBOTA DIESEL TRACTOR

2016 (66) 2.3 Tekna Auto Double Cab 4WD 4DR 61,277 Miles

Ag ; Graham Peall: 07970 121109 Andrew Elms: 07860 464753 Pick-Up’s ; Richard Young / Adam Swales: 01476 590077

KUBO TA

£17,950.00

MERLO

2008, 6600 Hrs Hydrostatic Transmission, 3200Kg Lift, Tyres: 405/70 R24 (25%)

£14,490.00

NISSAN NAVARA

Powerful Kubota Diesel Engine VHT PLUS2 (Variable Hydro Transmission) Responsive Hydrostatic Power Steering Independent Front & Semi-Independent Rear Suspension New Reinforced Steel Front Guard High Intensity Frame Structure Rollover Protective Structure (ROPS) Reliable Wet-type Disc Brake Optional Alloy Wheels Hydraulic Utility Valve Hydraulic Dumping Cargo Bed

Exceptional reliability, efficient performance

NEW

Upto 34km/h travel speed- Fastest travel speed in it’s class

Available with a panoramic, spacious factory fitted air-conditioned cab

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40

T174EA

Bi speed turn for tight turns and minimal damage to surfaces Twin wet-type disc brakes

Upto 34km/h travel speed- Fastest travel speed in it’s class

2017, 1350 Hrs, 160 HP PTO speed: 540/1000 B2050/B2350/B2650/B3150 Front tyre size: 480/70R28 95% NEW Rear tyre size: 580/70R38 95%

KUBO TA

1500 1000

Exceptional reliability, efficient performance

FROM

Bring more comfort and luxury to any task

Get ready for a whole new RTV experience.

NEW

FROM

LESS THAN

NEW

KUBO TA

KUBOTA 4WD DIESEL UTILITY VEHICLE

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40

Available with a panoramic, spacious factory fitted air-conditioned cab

RTV-X900 KUBO TA

T174EA

Bi speed turn for tight turns and minimal damage to surfaces Twin wet-type disc brakes

FROM

Get ready for a whole new RTV experience.

NEW

FROM

1500

Upto 34km/h travel speed- Fastest travel speed in it’s class

2017, 1470 Hrs, 185 HP PTO speed: 540/1000 B2050/B2350/B2650/B3150 Front tyre size: 540/65R28 80% NEW Rear tyre size: 650/60R38 80%

Bring more comfort and luxury to any task

KUBOTA 4WD DIESEL UTILITY VEHICLE

Exceptional reliability, efficient performance

NEW

KUBO TA

Bi speed turn for tight turns and minimal damage to surfaces Mechanical/independent PTO, available with ROPS protection Easy to access bonnet and headlights for night-work Available with a panoramic, spacious factory fitted air-conditioned cab Fuel efficient, with noise and vibration kept to a minimum One piece hood for easy maintenance

LESS THAN

T154V

Bi speed turn for tight turns and minimal damage to surfaces Twin wet-type disc brakes

FROM

Upto 34km/h travel speed- Fastest travel speed in it’s class Easy to access bonnet and headlights for night-work

KUBOTA DIESEL TRACTOR

RTV-X900 KUBO TA

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40

Exceptional reliability, efficient performance

TA KUBO

Bring more comfort and luxury to any task

KUBO TA

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

Get ready for a whole new RTV experience.

NEW

FROM

LESS THAN

FROM

Bring more comfort and luxury to any task

1500

KUBOTA DIESEL TRACTOR

NEW

KUBO TA

KUBOTA 4WD DIESEL UTILITY VEHICLE

Upto 34km/h travel speed- Fastest travel speed in it’s class

FROM

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP Bi speed turn for tight turns and minimal damage to surfaces

2015, 2479 Hrs, 195 HP PTO speed: 540/1000 B2050/B2350/B2650/B3150 Front tyre size: 380/85R28 10% Rear tyre size: 460/85R38 20%NEW

KUBOTA DIESEL TRACTOR

RTV-X900 Powerful Kubota Diesel Engine VHT PLUS2 (Variable Hydro Transmission) Responsive Hydrostatic Power Steering Independent Front & Semi-Independent Rear Suspension New Reinforced Steel Front Guard High Intensity Frame Structure Rollover Protective Structure (ROPS) Reliable Wet-type Disc Brake Optional Alloy Wheels Hydraulic Utility Valve Hydraulic Dumping Cargo Bed

KUBO TA

N174V

Bi speed turn for tight turns and minimal damage to surfaces Twin wet-type disc brakes

FROM

Get ready for a whole new RTV experience.

NEW

STW34/STW37/STW40

2014, 3078 Hrs, 215 HP PTO speed: 540/1000 B2050/B2350/B2650/B3150 Front tyre size: 540/65R30 65% Rear tyre size: 650/65R42 75%NEW

KUBOTA DIESEL TRACTOR

FROM

Exceptional reliability, efficient performance

FORD RANGER

2007, 3698 Hrs, 130 HP PTO speed: 540/1000 B2050/B2350/B2650/B3150 Front tyre size: 13.6R28 80% Rear tyre size: 16.9R38 80% NEW

KUBOTA DIESEL TRACTOR

£73,000.00

KUBOTA DIESEL TRACTOR

Exceptional reliability, efficient performance HST transmission

TA KUBO

Twin wet-type disc brakes

Upto 34km/h travel speed- Fastest travel speed in it’s class Easy to access bonnet and headlights for night-work

HOURS

2018, 239 Hrs, 165 HP PTO speed: 540/1000 B2050/B2350/B2650/B3150 Front tyre: 480/70R28 95% Rear tyre: 580/70R38NEW 95%

FROM

2 speed rear PTO & 1 speed mid PTO

Upto 34km/h travel speed- Fastest travel speed in it’s class

LESS THAN

FROM

£49,000.00

NEW

MF 7718

Bi speed turn for tight turns and minimal damage to surfaces

Easy to access bonnet and headlights for night-work

1500

N154EV

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

Twin wet-type disc brakes

KUBOTA 4WD DIESEL UTILITY VEHICLE

TA KUBO

STW34/STW37/STW40 Exceptional reliability, efficient performance HST transmission

TA KUBO

2 speed rear PTO & 1 speed mid PTO

KUBOTA DIESEL TRACTOR

NEW

MF 7620

FROM

Twin wet-type disc brakes

RTV-X900

LESS THAN

£52,750.00

NEW

Bi speed turn for tight turns and minimal damage to surfaces

KUBO TA

2 speed rear PTO & 1 speed mid PTO

KUBO TA

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

NEW

FROM

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40 Exceptional reliability, efficient performance HST transmission

TA KUBO

Get ready for a whole new RTV experience.

Twin wet-type disc brakes

Get ready for a whole new RTV experience.

NEW

KUBO TA

2 speed rear PTO & 1 speed mid PTO

KUBOTA 4WD DIESEL UTILITY VEHICLE

STW34/STW37/STW40

MF 5465

FROM

NEW

FROM

KUBOTA DIESEL TRACTOR

£25,500.00

NEW

KUBO TA

Twin wet-type disc brakes

RTV-X900

1000 500

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP Bi speed turn for tight turns and minimal damage to surfaces

FROM

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900 Get ready for a whole new RTV experience.

STW34/STW37/STW40 Exceptional reliability, efficient performance HST transmission

MF 4708 & FL.3416X FROM

KUBO TA

FROM

2 speed rear PTO & 1 speed mid PTO

KUBOTA DIESEL TRACTOR

2015 SUMMER CASHBACK CAMPAIGN ON

£37,850.00

NEW

Bi speed turn for tight turns and minimal damage to surfaces

Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

RTV-X900

NEW

FROM

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40

Exceptional reliability, efficient performance HST transmission

TA KUBO

KUBO TA

Get ready for a whole new RTV experience.

Available with a panoramic, spacious factory fitted air-conditioned cab

Bring more comfort and luxury to any task

USED VALTRA

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40

MF 1529

HOURS

KUBO TA

FROM

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900

NEW

FROM

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP

Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

Get ready for a whole new RTV experience.

LESS THAN

HOURS

KUBO TA

Easy to access bonnet and headlights for night-work

£16,290.00

TOYOTA HILUX

2015 (65) 3.0 Invincible D-4D Auto Double Cab 4WD 4DR 55,945 Miles

TELEHANDLERS

LESS THAN

FROM

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900 KUBO TA

Bring more comfort and luxury to any task

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP

Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

Upto 34km/h travel speed- Fastest travel speed in it’s class

KUBOTA DIESEL TRACTOR

Bring more comfort and luxury to any task

Get ready for a whole new RTV experience.

NEW

FROM

1000 500

KUBO TA

RTV-X900

KUBOTA DIESEL TRACTOR

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP

Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

USED MASSEY

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP

2015 SUMMER CASHBACK CAMPAIGN ON

Powerful Kubota E-TVCS diesel engines: 21HP Choices of Manual or HST transmissions Selectable 4WD Bi speed turn for tight turns and minimal damage t Mechanical/independent PTO, available with ROPS Easy to access bonnet and headlights for nigh Available with a panoramic, spacious factory fi air-conditioned cab Fuel efficient, with noise and vibration kept to a One piece hood for easy maintenance

2 speed rear PTO & 1 speed mid PTO

Available with a panoramic, spacious factory fitted air-conditioned cab

Bring more comfort and luxury to any task

Bring more comfort and luxury to any

Twin wet-type disc brakes

2015, 950 Hrs, 850 HP 2018, 416 Hrs, 135 HP 2015, 2500 Hrs, 210 HP 2018, 993 Hrs, 300 HP 2007, 7520 Hrs, 360 HP Front tyre size: 900/60R38 PTO speed: 540/1000 PTO speed: 540/1000 PTO speed: 540/1000 PTO speed: 540eco/1000 Rear tyre size: 710/60R30B2050/B2350/B2650/B3150 Front tyre size: 420/70R24B2050/B2350/B2650/B3150 90% Front tyre size: 540/65R30B2050/B2350/B2650/B3150 90% Front tyre size: 600/70R30B2050/B2350/B2650/B3150 95% Front tyre size: 460/70R34B2050/B2350/B2650/B3150 70% NEW tyre size: 540/65R38 95% NEW tyre size: 650/65R42 95% NEW tyre size: 710/70R42 95% NEW tyre size: 620/70R42 70% NEW 80% front tread 80% rear tread Rear Rear Rear Rear Easy to access bonnet and headlights for night-work

Bring more comfort and luxury to any task

KUBO TA

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

2 speed rear PTO & 1 speed mid PTO Upto 34km/h travel speed- Fastest travel speed in it’s class

Easy to access bonnet and headlights for night-work

KUBOTA DIESEL TRACTOR

NEW

HST transmission

TA KUBO

Twin wet-type disc brakes

Easy to access bonnet and headlights for night-work

KUBOTA DIESEL TRACTOR

Easy to access bonnet and headlights for nigh Available with a panoramic, spacious factory fi air-conditioned cab

Exceptional reliability, efficient performance

NEW

HST transmission

Easy to access bonnet and headlights for night-work

KUBOTA DIESEL TRACTOR

Upto 34km/h travel speed- Fastest travel speed

STW34/STW37/STW40

£56,500.00

Exceptional reliability, efficient performance

NEW

Bi speed turn for tight turns and minimal damage to surfaces

Twin wet-type disc brakes 2 speed rear PTO & 1 speed mid PTO

Get ready for a whole new RTV experience.

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40

828

TA KUBO

Twin wet-type disc brakes

HST transmission

Bi speed turn for tight turns and minimal damage t

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900 KUBO TA

£149,850.00

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

Powerful Kubota Diesel Engines: 34HP, 37HP o

FROM

NEW

HST transmission

Exceptional reliability, efficient perfo

Exceptional reliability, efficient performance

NEW

Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

Get ready for a whole new RTV experience.

HOURS

£89,850.00

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP HST transmission

KUBO TA

TA KUBO

B2050/B2350/B2650/B3150

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP

FROM

Powerful Kubota Diesel Engine VHT PLUS2 (Variable Hydro Transmission) Responsive Hydrostatic Power Steering Independent Front & Semi-Independent Rear S New Reinforced Steel Front Guard High Intensity Frame Structure Rollover Protective Structure (ROPS) Reliable Wet-type Disc Brake Optional Alloy Wheels Hydraulic Utility Valve Hydraulic Dumping Cargo Bed

KUBOTA DIESEL TRACTOR

Bring more comfort and luxury to any task

FROM

1500 1000

Exceptional reliability, efficient performance

NEW

HST transmission

KUBO TA

STW34/STW37/STW40

Exceptional reliability, efficient performance

NEW

KUBOTA DIESEL TRACTOR

RTV-X900

NEW

FROM

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40

Upto 34km/h travel speed- Fastest travel speed in it’s class

2015, 2710 Hrs Speed: 40Km/h 400 HP B2050/B2350/B2650/B3150 Track width: 30 Track %: 50 PTO Speed:NEW 1000

Get ready for a whole new RTV experience.

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40

£149,500.00

KUBO TA

FROM

Twin wet-type disc brakes 2 speed rear PTO & 1 speed mid PTO

KUBOTA 4WD DIESEL UTILITY VEHICLE

NEW

FROM

MT775E

Get ready for a whole new RTV experience.

NEW

HST transmission Bi speed turn for tight turns and minimal damage to surfaces

Easy to access bonnet and headlights for night-work

Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

KUBO TA

STW34/STW37/STW40

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

TA KUBO

Available with a panoramic, spacious factory fitted air-conditioned cab

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP

KUBO TA

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900 KUBO TA

Upto 34km/h travel speed- Fastest travel speed in it’s class

Get ready for a whole new RTV experience.

NEW

FROM

Twin wet-type disc brakes

2011, 7750 Hrs Speed: 40Km/h 400 HP B2050/B2350/B2650/B3150 Track width: 30 Track %: 40 PTO Speed:NEW 1000 FROM

FROM

Get ready for a whole new RTV exper

NEW

FROM

KUBOTA DIESEL TRACTOR

£120,000.00

Exceptional reliability, efficient performance

NEW

2 speed rear PTO & 1 speed mid PTO

Bring more comfort and luxury to any task

Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900

MT765C

KUBOTA DIESEL TRACTOR

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP

FROM

STW34/STW37/STW40

HST transmission Bi speed turn for tight turns and minimal damage to surfaces

Easy to access bonnet and headlights for night-work

Bring more comfort and luxury to any task

Powerful Kubota E-TVCS diesel engines: 21HP- 31HP

Choices of ManualCASHor HST transmissions 2015 SUMMER Selectable 4WD BACK CAMPAIGN ON

KUBO TA

KUBOTA DIESEL TRACTOR

£64,950.00

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

TA KUBO

Available with a panoramic, spacious factory fitted air-conditioned cab

KUBOTA DIESEL TRACTOR

Bring more comfort and luxury to any task

FROM

2 speed rear PTO & 1 speed mid PTO

Available with a panoramic, spacious factory fitted air-conditioned cab

KUBOTA DIESEL TRACTOR

KUBO TA

MT765C

NEW

FROM

Exceptional reliability, efficient performance

NEW

HST transmission

TA KUBO

Easy to access bonnet and headlights for night-work

Available with a panoramic, spacious factory fitted air-conditioned cab

FROM

Get ready for a whole new RTV experience.

STW34/STW37/STW40

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

NEW

HST transmission

MT755C

KUBO TA

Exceptional reliability, efficient performance

Powerful Kubota Diesel Engines: 34HP, 37HP or 40HP

TA KUBO

NEW

FROM

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40

Exceptional reliability, efficient performance

NEW

RTV-X900

Get ready for a whole new RTV experience.

KUBOTA DIESEL TRACTOR

STW34/STW37/STW40

FROM

2013, 1500 Hrs Speed: 50Km/h 175 HP Tyre size: 380/90R46 80% front tread 80% rear tread

NEW

FROM

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900

Get ready for a whole new RTV experience.

2015 SUMMER CASHBACK CAMPAIGN ON

KUBOTA 4WD DIESEL UTILITY VEHICLE

RTV-X900

Get ready for a whole new RTV experience.

NEW

FROM

2015 SUMMER CASHBACK CAMPAIGN ON

USED PICK-UPS

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

2015 SUMMER CASHBACK CAMPAIGN ON

USED CHALLENGER

2015 SUMMER CASHBACK CAMPAIGN ON

USED FENDT

2015 SUMMER CASHBACK CAMPAIGN ON

Errors and omissions excepted. All prices +VAT

238 www.farmads.co.uk January 2020

fg_class_jan_20.indd 238

12/12/2019 11:45

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268 TRACTORS & TELEHANDLERS

Kevin Kirby Limited

78 MF 550 multi power 77 MF 590 4860hrs

Warboys, Cambs

COMBINE HARVESTERS Year Make

Model

Cut

83 MF 2680 5690hrs, good hedge cutter tractor, very tidy 05 MF 6480, 6400hrs, c/w f/linkage

Hours

Price

Rabe 140M 5+1 plough

NEW HOLLAND 2013 2012 2010 2010 2006 2006 2002

New Holland New Holland New Holland New Holland New Holland New Holland New Holland

CR 9090 CR 9080 CR 9080 Elevation CR 9070 Elevation CR 980 CS 640FS TF78 Elektra

96 John Deere 6600, 5145hrs 1909/2273 1185/1602 2800/3676 1727/2010 3124/3916 2302/2630 3500/4000

£122,000 £118,000 £78,000 £78,000 £49,000 £46,000 £24,000

Claas Claas Claas Claas

Lexion 780TT Lexion 770TT Lexion 580+ TT Lexion 580 TT

35’ 35’V 30’V 30’V

1600/2200 1298/1583 1872/2514 2597/3873

POA £155,000 £72,000 £55,000

35’V 25’V 25’V

986/1204 1040/1350 722/1055

£165,000 £130,000 £139,000

695/981 525 1687/2103 1605

POA £76,750 £53,000 £48,000

Caterpillar 407C telehandler, 7m 3200hrs, tidy

HARVESTING NEW – old stock MF 7345S, 18’ PF 92 MF 38, 20’, PF, 3000hrs, tidy Pottinger Terrasem C6

Farmhand 8 bale fork 10 Heath Super Chaser Extra, joystick control

CASE IH 2016 Case IH 2013 Case IH 2016 Case IH

8240 Trax 7230 7140 X Flow

Various forks & grapples 14 Krone 890, tidy 15 Krone 1290 HDP high speed baler

MASSEY FERGUSON 2016 2014 2010 2008

Massey Ferguson Massey Ferguson Massey Ferguson Massey Ferguson

7382 FL Centora 7345S Activa 7282AL Centora 7270 Beta

25’PF 18’FF 25’PF 20’PF

13 Krone 1290 HDP high speed baler

COMBINE HIRE AVAILABLE

Office

Portequip sheep feed trailer

John Deere 590 round baler 07 Krone 900 twin rotor rake

OTHER EQUIPMENT

info@kevinkirby.com

Dowdeswell DP1 offset 6f

Visit our website www.kevinkirby.com

67452

12 Claas 3200 quadrant Vicon RV2160 round baler, very tidy

01733 219880 Mobile 07860 542578 Email

Claas Variant 180 rotofeed

Dowdeswell DP7F, 6f, v tidy Amazone Catros 6000 discs

Dowdeswell DP7F, 7f, v tidy KV LD85 5f & 4f

BUY and SELL

Flat Lift Force – 2 leg HD Buster Pottinger 4m power harrow Pottinger 6m Terrasem drill, ex demo Vaderstad RDA600 Rapid, 6m drill, tidy order

used farm machinery for

69260

FREE online

Vicon PO-EDW weighcell, vgo Bomford B467 hedgecutter

Vicon RO-EDW extension hopper Kuhn Axis 30.1 spreader extension hopper Sulky X36 spreader, very tidy Cousins 9.3m Sidewinder Marshall 1300 gall vacuum tanker

Buy and sell online — www.farmads.co.uk

35’ 35’V 30’V 25’V 30’V 17’ Hi Cap 30’

CLAAS 2014 2014 2007 2005

15 MF 9407 telehander, 7m reach

HEDGECUTTERS KV LB85–160 5f vari width

Bomford 467 Fella TFS 60 tidy

VEHICLES Isuzu Dmax Utah Auto, 19 plate ex-demo c/w Truckman Canopy & diamond cut alloy wheels & dash cam Isuzu Dmax Utah, Venetian red, Alpha canopy, 18 plate, ex demo Dowdeswell DP 7E 5+1

Farmers Guide

w w w. f ar m a ds. co. u k

Isuzu Dmax Eiger, 15 plate, 54,006 miles

07885 202005 01954 210355 Hardwick, Cambridge

www.markweatherhead.co.uk January 2020 www.farmads.co.uk 239

fg_class_jan_20.indd 239

13/12/2019 12:47

SPARE PARTS (cont)

GM-R SPRAYERS LTD y The Specialist Sprayer Compan

FLAILS DIRECT .CO.UK

2019 ex demo Agribuggy A280 41hrs, 2700L 12/24m aluminium boom, with 13 section GPS auto section control, Tee-Jet Field-Pilot auto steer, rowcrops 340/85R 36 540/65R24 floatation wheels â&#x20AC;&#x201C; the only lightweight mechanical drive in its class unladen weight 4.7t 2014 John Deere M952i 5000L 36m two sets wheels, Isobus & joystick (JD2700 screen available extra) GM-R Voyager 4000 24m last of this model after 15yrs (new models at Lamma 2020 ) auto steer GPS section control NSTS years warranty ..............................ÂŁ45,000+VAT on farm 2016 Agribuggy A280 2200hrs fully serviced tank 2700L 12/24m aluminium boom Tee-Jet Field-Pilot auto steer with 9 section GPS auto section control 9.5x44 rowcrops 560/60R22.5 floatation wheels

E-mail: sales@flailsdirect.co.uk Website: www.flailsdirect.co.uk

Also flail mowers for tractors and excavators from 15 to 200HP

McConnel (Kellands) Multidrive 6195 with Bredal K85 spreader 2012 two sets wheels

Celebrating 15 years of GM-R Sprayers Ltd

NSTS SPRAYER SLUG PELLET & GRANULAR APPLICATOR TESTING

SPRAYERS

SPRAYER TESTING on site to 47-69104

National Standards

OW BOOK YOUR TEST N HYDRAULIC HOSE ASSEMBLIES MADE WHILE YOU WAIT

on farm or at our test centre, all makes

More sprayers on our website:

www.gm-rsprayers.co.uk All offered subject to remaining unsold

Graham Mitchell-Rowlands 07860 618903 01449 737482 graham@gm-rsprayers.co.uk Marek Technical Support: 07496 294201 Sue Admin: 01449 736300 Holly Bush Farm, Buxhall, Stowmarket, Suffolk IP14 3DP For your new self-propelled, trailed or mounted crop sprayer, to go

Landquip Electrac 24m 2006, 3500 litre, electronic controller, full refurbishment including shot blasted & sprayed, GPS/auto shut off option at extra cost Knight EU trailed 24m 2010, 3000 litre, electronic controller, GPS/auto shut off option at extra cost Gem multi track trailed, 20/21m 1999, 2100 litre John Deere 840i trailed 36m 2009, 4000 litre, auto shut off Bateman RB15 24m 1997, 3000 litre

www.gm-rsprayers.co.uk

Househam AR4000

Bateman RB15 24m 1996, 2500 litre Bateman Hi/Low deutz engine, 24m, 1990, 2000 litre

AGRIKEL CROP SPRAYERS

Agri buggy demount 12m 2004, 2000 litre

01953 450279 info@agrikel.com Norfolk

ÂŁ37,995

2008, 30m, 4000L, 7670hrs, auto section control, 3 sets of wheels, 36m boom extensions included More photos & full spec at

47-69214

www.agrikel.com

Frogs Hall, Wilby, Eye, Suffolk IP21 5LF

07748 644975 47-68312

(Flails direct is a division of Engineering and Hire Ltd)

Sancroft Agri Services Ltd

LANDQUIP 3500L 24m Electrac, 2011, 12 GPS sections, Michelin ďŹ&#x201A;oats/rowcrops, hyd tracking drawbar, 400L clean water tank, stainless steel induction bowl, heavy duty Pommier boom, owner operated from new, excellent cond, 12 monthts MOT. ÂŁ15,500 ono. C Townshend Tel 07877 701848 (Suffolk)

www.writtlefarmmachinery.co.uk

SPRAYTEC LTD

CHAFER induction hopper, pump & PTO shaft. ÂŁ450. M Abblitt Tel 07720 839253 (Cambs)

AGRI SPRAY

incorporating

VASSGRO S P R A Y E R S

Agricultural Application Machinery Specialists SPRAYER & SLUG APPLICATOR NSTS TESTING AT OUR LOCATIONS OR ON SITE FULL ON FARM SERVICE & REPAIR Main Agents for

TEAMHYPROTEEJETRDS ENDURAMAXXDUAL PUMPS K RAYERS IN STOC NEW & USED SP

USED STOCK

Sprayer Specialists in the Eastern & Southern Counties Crop & Amenity Sprayer Specialist Sprayer Specialist in the Eastern & Southern Counties New and used sprayers and parts stocked for:

Hardi Commander 3200L 24m HPZ Force Boom, 2010, vgc ..........................ÂŁ12,500+VAT

Berthoud â&#x20AC;˘ Househam Chafer â&#x20AC;˘ Agrifac and most other makes Hypro â&#x20AC;˘ Teejet â&#x20AC;˘ Lechler Altek â&#x20AC;˘ RDS â&#x20AC;˘ Dual Pumps Enduramaxx â&#x20AC;˘ Stocks Fan Jet

CHAVIOT 2000, 96 P reg, 300TDI auto, 5640hrs, 24m c/w aluminium end sections, 2100L plus clean water tank, Delta 34i rate controller, air con, blob marker, 2 sets wheels, excellent condition. ÂŁ5,950+VAT. R Maundrell Tel 07785 568800/01527 854834 (Warks)

BATEMAN RB25, 2003, 8759hrs, JD 170hp engine, 3000L, 12/18/24m contour boom, AR250 spray pump, LH Agro 5000 rate controller, Egnos GPS, 4x6m auto sections, 380/85-R28 rowcrops, Goodyear Terra tyres, foam bout-marker, in-line ďŹ lter, vgc. ÂŁ30,000+VAT. N Gadsby Tel 07970 182529/01223 207214 (Herts)

Boston Crop Sprayers Ltd

Berthoud Tenor 5500L 40m DP Tronic, vgc, 2009, boom could be resized if required ...ÂŁ22,500+VAT

47-68982

07748 004794 01245 442224(T)

ARAG Digi Wolf 2" ďŹ&#x201A;ow meter, c/w banjo couplings. ÂŁ275. M Abblitt Tel 07720 839253 (Cambs)

BATEMAN RB17, 24m contour boom, 3000L, Teejet 5-way nozzle bodies, fast ďŹ ll pump, Integra screen with mapping & autoswath shut off, electric track width adjustment, 2 sets of wheels, excellent condition, full service history. Emerson Tel 07768 400289 (Lincs)

CASE SP2000 self propelled sprayer, 2000L, 24m, rate controller, hydrostatic 40k, 4ws, NSTS tested, goes well. ÂŁ13,500 ono. G Blandford Tel 07973 424473 (Hereford)

Hardi Master 1200L 15m 2008, fully serviced & vgc ........................ÂŁ5,000+VAT Contact Richard Dix

07770 331587

BOSTON 01205 722 240 WISBECH 01945 461 181 BEDFORD 01525 841 923

HOUSEHAM Air Ride 2500, 24/12m booms, 600/55R26.5 ďŹ&#x201A;otations 30%, 300 rowcrops 90%, 2005, 5800hrs, GPS & 4 section control RDS box, variable rate unlocked, a really nice light sprayer, regularly serviced & in good condition throughout. M Hutchinson Tel 07968 506289 (N Yorks)

47-63555

Tel: 01427 718561 Fax: 01427 718016

BATEMAN RB15, 1998, 24m 2500L, twin lines, 125hp, 8100hrs, fert subframe & demount legs, GPS switching ďŹ tted, available at extra cost. ÂŁ15,500+VAT. J Newsham Tel 07790 605535 (Worcs)

47-69364

To suit most flail mowers and hedge cutters at competitive prices

46-68837

Trade advertising â&#x20AC;&#x201D; Tel: 01473 694455 Email: classified@farmersguide.co.uk

QUALITY FLAILS

www.bostoncropsprayersltd.co.uk

AGRICULTURAL SPRAYERS SALES SERVICE SPARES

47-68955

01284 724455

BERTHOUD Alto 400 lance sprayer, good working order. ÂŁ800. S Melton Tel 07988 585009 (Cambs) 2,000-LITRE stainless steel tanks, make good front tank for spraying or fertiliser on front links. E Mackereth Tel 07966 381990/01524 272201 (Lancs)

SPRAYER, SLUG PELLET AND GRANULAR APPLICATOR TESTING

Contacts: Robert Webb: 07860 801322 Anthony Williams: 07711 947189 Phil Ramsey: 07934 799628 Andy Gemmill: 07802 336880

01279 812727 spraytecltd@btinternet.com

www.spraytecltd.co.uk

AGRIFAC Condor self-propelled sprayer, 2012 machine, 7677hrs, 24/36m boom, 4000L tank, 49,689ha worked, set of narrow & ďŹ&#x201A;otation wheels included. ÂŁ60,000+VAT ovno. S Glover Tel 07798 708843/07775 515101 (Norfolk)

KNIGHT Trailblazer 24m 4200, 2014, only 4000ha from new, section control, auto height, self-levelling air suspension, steering axle, h/d boom, section control, triplet bodies, induction hopper, pressure washer, 2 sets wheels, as new. ÂŁ31,500+VAT. M Houldcroft Tel 07496 387714 (Rutland)

240 www.farmads.co.uk January 2020

fg_class_jan_20.indd 240

13/12/2019 11:10

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

CLAAS EASTERN

SULKY X36 2012

£3,950

Tim Smith

Tel: 01529 303093 Mob: 07730 780510

SEE ALL OUR MACHINES FOR SALE VISIT OUR NEW WEBSITE:

www.claas-eastern.co.uk

SU0019

LEMKEN VARIOPACK 110 £1,950 1992 LK0643

CLAAS ARION 410 CIS £35,500 2014 40kph, 110hp, 2919 engine hrs CT2546

CLAAS QUADRANT 5300 FINE CUT TA £89,500 2017 CL8974

LEMKEN SOLITAIR 8 2008

KEITH RENNIE MACHINERY EX 2200 TREND £210 2000 KR1135

SANDS HORIZON 5500 £122,000 2015 ZZ1720

CHALLENGER ROGATOR RG635 £69,500 2011 ZZ1724

KUHN FC313 2005 mowers

KU0130

CLAAS JAGUAR 950 4WD £109,000 2013 3m pick up, 3750 EH CL9275

NEW HOLLAND 9070 2012

LEMKEN HELIODOR 9 2017

JCB 530/70 FARM SPECIAL SUPER £17,500 2003 8000hrs 460/70 R24 JC0288

LEMKEN JUWEL 8 V6 N100 2013

£19,000 LK0784

CLAAS DOM 106M £5,000 1985 5m cutterbar, 3855 EH CL9811

LEMKEN EUROPAL 9 N90 2014

NEW HOLLAND BR6090 ROUND BALER 2012

£9,850 NH0356

NH0350

SIMBA FREEFLOW BEAN CONVERSION 1996

£1,950 SH0064

AMAZONE UG 3000 SUPER 2014

£28,000 AM0352

COUSINS V FORM 7 LEG 2008

£6,800 CO0005

MASSEY FERGUSON 6465 £21,000 2003 40kph, 5040 engine hrs MF0337

KUHN MULTI-MASTER 183 OL 2016

CHAFER SENTRY 5000 2014

KUHN AXIS 40.1 W 2009

DOWDESWELL MA 140 6 FURROW 2014

£27,750 LK0775

£15,950 KU0140

£33,850 ZZ1760

£4,950 KU0141

£6,250 DW0082

CASE/IH GEM TS3000 2002

HORSCH PT270 2013

£16,000 LK0801

£9,500

CHAFER GUARDIAN 3500

CI0256

2011

£125,000

£22,000 ZZ1742

KNIGHT EAU 24M 2000

KNIGHT EUA21AB 2011

LK0723

£8,500 KN0006

£10,000 KN0007

HO0131

NEW HOLLAND CR9080 £85,000 2007 9.0m NH Varifeed cutterbar NH0358

NEW HOLLAND CR9090 ST 4WD £155,000 2013 10.5m Varifeed cutterbar NH0359

MASSEY FERGUSON 6150 £11,750 1994 40kph, 95hp, 8460 engine hrs MF0329

CLAAS XERION 3800 £76,500 2013 380hp, 11060 engine hrs CT2663

NEW HOLLAND T7.210 £54,000 2016 40kph, 212hp, 1496 engine hrs NH0360

Buy and sell online — www.farmads.co.uk

£28,500

£2,900

£12,950

68914

January 2020 www.farmads.co.uk 241

fg_class_jan_20.indd 241

12/12/2019 11:48

Time for an upgrade?

Farmers Guide

FarmAds.co.uk Buy & Sell online for FREE with www.

13/12/2019 11:14

fg_class_jan_20.indd 242

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

Reynolds Motors Cromer • Norfolk

68828

Limited

Brian & John Jnr would like to wish everyone a Happy Christmas & Prosperous New Year

07836 643155 01263 833281

Station Yard, Postland, Crowland, Peterborough PE6 0JT Tel: 01406 330386 Fax: 01406 330080 Email: martyn.stanley@fenlandtractors.co.uk

Cat D6C 82A direct drive direct start 1967

Cat D4D 44H 1977 good UC tidy

Cat D4D 60J 1969, ex local farm straight & tidy

Cat 953 tracked loader 1986, 4in1 bucket Rops, tidy

Mercedes Unimog mid 80’s with removable bunded diesel tank

McCauley A2GP12 dump trailer with HD ramps, new unused

JCB 86C-1 2014, 1514hrs, street pads, piped for various attachments

Hitachi ZX48U-5CLR 2015, 1010hrs, immaculate throughout, 1 owner

Doosan DX140LCR-3 2014, 2120hrs, immaculate throughout, 1 owner

Suppliers of replacement parts for all Caterpillar machines DUE IN – Cat D5 VHP, Cat 312C, JCB 8080, JCB 532-120, Cat D2 J Model, International BTD 6 Visit our website www.fenlandtractors.co.uk to see our stock machines

AVISON SPRAYERS

LARGEST USED SPRAYER OUTLET IN UK

2014 Househam Merlin M4-30 4000L 30m + GPS 3670hrs

2013 Sam Vision 4000L 12-24m + GPS 5330hrs

2012 Househam AR 3500L 14-24m (can make 28m) + GPS, 3700hrs

2011 Bateman RB26 3000L 12-24m vg + GPS 4850hrs

2011 Househam AR 3500L 13-24m + GPS 3250hrs

2013 Bateman RB35 4000L 12-24-36m + GPS 8400hrs

2011 Househam AR 5000L 12-24-30m + GPS 4430hrs

2010 Bateman RB55 5000L 36m + GPS + ST RTK 8700hrs

2009 Bateman RB35 4000L 12-24-30m + GPS 7500hrs

2006 Bateman RB16 3000L 24m 6300hrs

2007 Sam SLC 3000L 12-24m 5750hrs

2006 Househam AR 2500L 14-28m (can convert to 24m) 3375hrs

2004 Knight SP1830 3000L 12-24m 5430hrs

2004 Chafer Mirage 3000L 12-24m 7440hrs

2000 Case SP 3000 12-24m 7200hrs

Buy and sell online — www.farmads.co.uk

BEET HARVESTERS TIM & THYREGOD 2–3 ROW beet buckets – choice of standard & toe tip BEET CLEANERS – CHOICE OF CTM & TODD precleaner or roller table with picking tables, etc BEET DRILLS – CHOICE OF 6 & 12 ROW Monopill, Monosem, Kleine & Stanhay BEET HOES CHOICE OF 6 & 12 ROW HYD FOLD Standen • Househam• FMA 6 METRE FRONT STEERING PRESS HYD FOLD Edlington 6.5m hyd folding rolls with breaker rings TERRADISC CULTIVATORS 3 & 4M Dutch & combination harrows 3 to 6 metre VADERSTAD ROLLEX 620 6M ROLLS Opico 3m grass topper LEMKEN OPAL 120 VARIWIDTH 4F PLOUGH Krone Optimat 4t muck spreader KEEBLE 6M HYD FOLD CULTIVATOR/SUBSOILER 16 h/d cultivator & 9 subsoiler legs hyd levelling tines & hyd packer roll SIMBA MONO DISC/CULTIVATOR + DD PACKER Claas 105 combine 17’ Merc/Hydro & chopper barn stored v tidy FLAT LIFTS – SUB SOILERS 2 TO 5 LEG 45’ tri-axle artic trailer on air for straw, etc 8T BUNNINGS DUMP TRAILER rowcrop wheels & tyres – rears 8 stud 14.9R46, fronts 10 stud 14.9R30 10T LOW LOADER WITH AIR & OIL BRAKES 10t ﬂat trailers, 25’ twin axle 10T BUNNINGS MUCK SPREADER WITH R/DISCS Tipping trailer 3/4t with steel grain body 14T RICHARD WESTERN ROOT CROP TRAILER sprung drawbar hyd tailgate on 10 stud axles 14T MARSTON GRAIN TRAILER MANUAL TAILGATE Choice of low load single axle drill trailers 50’ NEAN COMBINE/MACHINERY TRAILER full MOT wells & outriggers on air with rear lift

Mob Tel

Fenland Tractors

68352

WANTED SELF PROPELLED AND TRAILED SPRAYERS

Roughton Moor, Woodhall Spa, Lincolnshire LN10 6YQ Tel: 01526 354433 • Fax: 01526 354242 • email: sales@avisonsprayers.com • web: www.avisonsprayers.com

69365

This is but a selection of our stock – more on our website – www.avisonsprayers.com January 2020 www.farmads.co.uk 243

fg_class_jan_20.indd 243

12/12/2019 11:52

MONT

Agrifac Condor IV C045307 2018 5000 litre 36/30/24m boom 1608 hours 14865 hectares

trade in

HARDI Navigator 5000 2015 5000 litre 36/27m boom £25,000.00

Agrifac UK Ltd

4 Thorby Avenue, March, Cambridgeshire, PE15 0AZ 01354 660552 www.agrifac.co.uk

trade in

MONT

Agrifac Condor IV C045098 2016

WARRANHS TY

5000 litre 42/36/24m boom 3450 hours 21975 hectares £190,000.00

Agrifac Condor II C025099 2012 4000 litre 36/24m boom 7555 hours 64,000 hectares

trade in

Vervaet 617 2007

7500 engine hours 45/50cm walking share lifter Leaf spreader topper Harvest ready condition £70,000.00

Vervaet 625 2006

8187 engine hours Leaf spreader topper 45cm/50cm row widths

trade in

Agrifac Condor III C035083 2014 4000 litre 36/24m boom 9601 hours 88100 hectares £65,000.00

trade in

HOLMER T2 2004

Leaf spreader topper 50cm fixed walking share lifter Harvest ready condition £46,000.00

MONT

Agrifac Condor IV C045167 2017

WARRANHS TY

4000 litre 36/30/24m boom 4478 hours 47829 hectares

trade in

Agrifac Big Six 2005

8500 engine hours 45/50cm row change Walking share lifter 2 lifting turbines, 4 cleaning turbines 20 tonne holding tank £35,000.00

MONT

WARRANHS TY

Agrifac Condor IV C045005 2015 5000 litre 40/36/24m boom 5220 hours 59,600 hectares £170,000.00

trade in

Agrifac WKM 9000 1998

Leaf spreader topper 45/50cm walking share lifter 2 lifting turbines, 3 cleaning turbines 1 cleaning roller bed 9 tonne holding tank £39,000.00

Want to find out more about the Agrifac Premium Proven or Trade In program? Chris Potter - Sprayer Sales North - 07741 312197 Julian Arrowsmith - Sprayer Sales South - 07825 261853 Matt Carse - Harvester & Tanker Sales - 07860 288973

See us at

OVER 50 YEARS EXPERIENCE

LARGE SELECTION OF QUALITY USED MACHINERY

Stand 17.200

Telephone 01371 830353 Email info@jbrockandsons.com Visit www.jbrockandsons.com

Woodhams Farm, Cutlers Green, Thaxted, Essex CM6 2RH 69068

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

WARRANHS TY

BROCK Campaign 9m G+F tine drill, BROCK Sub-V 4m 7 leg folding mtd BROCK Sub-V 3m 5 leg mtd FARMET Softer 5PS 5m short disc, FARMET Fantom Pro 1250 12.5m FARMET Fantom FX 470 NS 4.7m 2017 c/w Avadex & slug pellets, subsoiler, 700mm packer, integral stubble cultivator, 2019, hyd paddles, 560mm discs, SDR steel ring packer, subsoiler, 700mm packer, swivel mtd folding stubble cultivator, autoreset, see at LAMMA .......... £17,750 see at LAMMA ................... £89,500 see at LAMMA ................... £27,650 scrapers, see at LAMMA .... £15,450 tool box, see at LAMMA ....... £9,850 see video working this Oct/Nov

JOHN DEERE 3050 HL 4wd tractor, 1990, 7280hrs, 2 SCVs, 8/10

SAME 90 Explorer 4wd tractor, 1995, 3002hrs, 40k, 3 SCVs, Quicke 445 c/w fork, bucket & spike, 7/10

CATERPILLER D5 VHP steel track CLAAS Arion 540, 2014, 1800 hrs, 40K, cab susp, f/weight, 600/65 R38 crawler, 1985 c/w 9400hrs, rear rears, 460/65 R28 fronts ........ due in linkage, good tracks, 8/10

McCORMICK XTX200 4wd tractor, 2007 c/w 4020hrs, f/weights, full suspension, 4 SCVs, 9/10

JCB Loadall 530-70 Farm Special, 2001, 6915hrs, PUH, hyd attach, pallet forks, 1cu/m bucket, 7/10

SUMO 3m Trio, 2011, 6 subsoiler KVERNELAND LO85-300 7 furrow (6+1) on-land/in-furrow, 2005, just legs, shearpin protection, drop-out had ﬁrst set of bodies, 9/10 £14,500 discs, 800mm Multipacker, 9/10

KUHN Aero 2212 12m boomed fertiliser spreader, 2001, 7/10

AMAZONE Cayenna 6001-C 6m grain SIMBA 7.6m single press, 2010 c/w SUMO 4m 7 leg Trio, 2008, straight front discs, drop-out discs, BROCK 700mm DD rings with new wear & fert tine drill, 2016 c/w pre-em markers, 8/10 .................... £38,500 plates, 8/10 .......................... £7,750 700mm packers, 8/10 ........ £19,750

VADERSTAD 7m NZG c/w hyd levelling paddles, rear drawbar 6/10

AMAZONE ZA-M 1501 fert spreader, LELY 300-35 3m power harrow drill combination, 1995 c/w tooth packer, 2010, weigh cells, SBS, Amatron, done little work, 9/10 ............ £6,750 Suffolk coulters, 8/10

McCONNEL 4.5m batwing topper, WEAVING 4m Piggyback tine drill, 2004, done approx 1000 acres from year 2013 c/w hyd fan, double following harrow .................... due in new, 8/10

VADERSTAD 5m Carrier Super, 2009, hyd levelling paddles, steel ring packer, rear lights, 8/10 ...... £18,450

244 www.farmads.co.uk January 2020

fg_class_jan_20.indd 244

12/12/2019 13:10

ABBOTT & CO (Wessex) LTD

FOR SALE

Are buyers & sellers of

BEST PRICES PAID

HAY & STRAW

01636 700608 07860 637654

50-68989

pad500r@hotmail.co.uk

OAT straw, good feed or bedding. Call for price. C Goater Tel 07979 556169 (Hants)

www.thekinggroup.co.uk/tanks 01638 712328 Suffolk 01992 451629 Herts/Essex

OWEN SMITH FARMING electric metering, PTO fan, hyd folding booms, Horstine Wizard controller

01394 460408 07885 594143

Bedfordshire

HAY, 2019 crop, in conventional bales, can deliver locally. J Nurse Tel 01953 850380/07899 775665 (Norfolk)

KUHN 40.1W spreader, 2014, S 6 discs, Quantron 2 colour screen, weigh cell machine, very accurate, always washed, in vgc. £6,995. W Campbell Tel 07738 955496 (Cambs)

STEEL

S SCOTT & SONS Ltd Steel Stockholders

Posts for grain walling and silage clamps

00-66972

All types of steel available new and secondhand

Galvanised roofing sheets, box profile and corrugated Delivery service

01359 269378 STRAW & HAY THIS season's hay, in mini Hesston bales, collection near Leiston. £25/ bale. T Haste Tel 07872 916363 (Suffolk)

WANTED

49-69332

07971 930545

www.henryparrishmachinery.co.uk

prefer big bales

07787 551081

WANTED WHEAT, BARLEY & RAPE STRAW also SOFT MEADOW HAY

off the field & throughout the winter Very good prices paid promptly

Call Jeff on

07977 268113 (T)

more photos and full spec at www.writtlefarmmachinery.co.uk

07748 004794 01245 442224(T)

KRM 3m front steering press, weight 1500kg, water ballast weight 750kg, total weight with water 2250kg, had very little use, more pics on FG FarmAds website. £3,950+VAT ono. P Appleby Tel 07850 317403 (Co Durham)

Simba 5.5m CultiPress

LEMKEN crosskill press, 2.5m, in good working order. GW Harrold & Partners Tel 01485 518244 (Norfolk)

JOSKIN 2017 KOMFORT 2 18000 TANKER

GRANGEWARDS (THE HARROW KING)

£37,500

£16,750

2009, Proactive tines, levelling board, DD rings, new metal More photos and full spec at

www.writtlefarmmachinery.co.uk

07748 004794 01245 442224(T)

Call: Adam 07854 186508 SMALL metal tank, no rust. £20. G Meadows Tel 07951 111182/01728 660577 (Suffolk)

REGAL TANKS

SMALL bale barley & wheat straw. £2/ bale. M Carpenter Tel 07759 910099 (Norfolk) HAYLAGE round bales, made June 2019, good quality. £20/bale. A Hancox Tel 01527 821863 (Worcs) 350 late baled hay. £2 each; also 100 good hay. £3 each. R Everett Tel 07963 798391 (Suffolk)

available for immediate delivery, 22"-24" rings, horizontal folding, contour following

11020342

Call Andrew Lloyd

49-68993

£2,750+VAT

TITAN 2500 Fuel Master bunded fuel tank, with 12v fuel pump & lockable cabinet, excellent condition. £550+VAT. N McDonald-Doig Tel 07831 607872 (Norfolk)

50-68992

Good quality round & small bale hay Also round bale haylage & barley straw always available Call us for a good deal

49-69100

48-69336

Horstine TMA4 12m

in stock

INDUSTRIAL STORAGE TANKS HIRE • NEW • USED

Pan Busters & spirals ALL BLENCH SPARES 454 Herne Road, 51-68970 Ramsey St Mary’s, Huntingdon, Cambs.

Buy and sell online — www.farmads.co.uk

SPREADERS

www.andrewguest.co.uk

New HE-VA rolls

22,730 litre bunded tanks 17’L plus cabinet x 9’2”W x 8’H gauge & battery alarm

HORSTINE Cascade 15m spreader, very good condition. M Cottage Tel 01799 584225/07989 297074 (Cambs)

e: info@andrewguest.co.uk

KUHN power harrow, 4.5m, with transport wheels. £2,500. R Hopkinson Tel 07976 424263 (Lincs) DALBO 6m cultivator, in working order. C Eagle Tel 01603 759678 (Norfolk)

51,000 litre horiz/cyl dished ends 27’6”L x 9’W x 10’H & cradles 1 x twin & 2 x single compart

HOUSEHAM Sprint, 1994, 24m Techneat Avacast (Avadex), 2 new sets of wheels, 24m 2000L demount, fert sub-frame & demountable legs. £16,500. J Newsham Tel 07790 605535 (Worcs)

Andy Guest

01603 870903 07860 475964

TANKS

01284 810751 07768 353910

d New & Usees ar p S e in h Mac & Repairs

51-69217

& WANTED

RAPE, WHEAT & BARLEY STRAW STRAW IN THE SWATH WANTED for home market & export

COLLECTION & DELIVERY arranged

Kuhn Power Harrows Drills & Accord

51-69216

P J Reed

49-68845

BATEMAN RB16, 2000, 3000L tank, 12/18/20/24m contour boom, 6 cyl pump, prime & purge, air shut off, Bateman foam marker, 12.4R32 rowcrops, 580/65R22.5 ﬂotations, demount legs, new injectors & injection pump, in March, tested till 04 2020. S Dudley Tel 07860 599377 (Essex)

49-69094

SPRAYERS (cont)

51-68971

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

01733 844590 (24hrs)

PRIMPOLEX 3m disc harrow. C Eagle Tel 01603 759678 (Norfolk) COUSINS Contour folding Cambridge rolls, 10.5m, plain crimps. £7,750 ono. A Whitehead Tel 07771 507279 (Norfolk)

01502 710100 Fully searchable database at...

www.regaltanks.co.uk

TILLAGE TACKLE FLEXICOIL discs, 10’, 22’’ scalloped fronts, 24’’ plain rear, bearings recently replaced, rear drawbar, vgc. £2,300. P Waudby Tel 07961 558831 (E Yorks) MOLE plough, trailed, long beam, hydraulic wheels, single leg. £1,050. J Weston Tel 07803 270448 (Lincs) CAMBRIDGE triple gang rollers. £375. J Ramsey Tel 01653 628366 (N Yorks)

KONGSKILDE Germinator SP 6000, more than one available, please call. GW Harrold & Partners Tel 07836 751076 (Norfolk) CAMBRIDGE gang rollers. £375. J Ramsey Tel 01653 628366 (N Yorks) COUSINS 1.5m front press, 45 degree rings, steering, stands, little used & as new. £1,950. D Cox Tel 07970 976476/07968 080694 (Oxon)

COUSINS Contour 6m rolls, 2010, 24" rings c/w breakers, seeder not included, very good condition. £5,250. M Abblitt Tel 07720 839253 (Cambs)

January 2020 www.farmads.co.uk 245

fg_class_jan_20.indd 245

13/12/2019 11:46

+44(0)7971 242 905 +44(0)7801 835 205 +44(0)7951 021 461 +44(0)7977 015 345 +44(0)7584 468 319 +44(0)1728 724 255 +44(0)7753 562 265 +44(0)1531 640 518 +44(0)1736 719 440 +353(0)87 193 4008 +44(0)7989 150 536

Scotland /All Enquiries Kelso & Lothian Harvesters Yorkshire & Humber Ltd Lincolnshire ScanStone Lakenheath RWL Services (Suffolk) West Midlands RPFS (Herefordshire) Cornwall Farm Machinery Quaile Machinery (Ireland) All Export

ScanStone

craig.thomson@scanstone.co.uk (Craig Thomson) craig@kelsoharvester.co.uk (Craig Robertson) n.jackson@yandhagri.co.uk (Neil Jackson) steve.cooper@scanstone.co.uk (Steve Cooper) lakenheath@scanstone.co.uk (Tina Anderson) richard@rwlservices.co.uk (Richard Lapage) william.skea@scanstone.co.uk (William Skea) price.russell@btconnect.com (Russell Price) stephen.edmond@cornwallfarmmachinery.co.uk sales@quailemachinery.ie (Ian Rooney) alison.skea@scanstone.co.uk (Alison Skea)

P O TAT O S Y S T E M S

USED STOCK UPDATED DAILY WWW.SCANSTONE.CO.UK

£1 00

00 0

£5

£1 Grimme CS1500 Web, 2000 Star SB, Multi-Blade SS 525

£4

0 50

50 ,9

, £4

Reekie Speed Star, 2003 Star SB, Levelling, Multi Blade, Rotor SS 546

0 75

00 ,0 £4

, £1

,5 £6

Reekie 2 Body SB Bed Former, 1999 New Metal, Excellent Condition SS 534

ScanStone 5.4m Straddle Tiller 2019 QC Blades SDM 104

Reekie Reliance 5154, 1997 Stone Box, Rotor Front SS 439

£P

OA £P

£P

,0 £7

00 ,3

£3

ScanStone 3 Webber Destoner, 2019 Multi-Blade, Brakes, New CB, Levelling SDM 107

,5 £4

ScanStone 2 Body AR+, 2016 Dual Auto Reset SS 573

ScanStone Gemini Grass Topper 2018 SDM 067

£2 Standen 1.8m Tiller, 1995 C-Shape Blades SS 502

Grimme GZ1700, 2002 Digger Web, 2nd Web, Single MS, LD SS 489

ScanStone 2 Body AR+, 2016 Dual Auto Reset SS 574

0 ,0 £8

50 ,2 £7

0 50

, £2

ScanStone 4215SB Destoner, 2005 Rotor Front, Multi-Blade, No Stone Box SS 457

Grimme 5.4m Straddle Tiller, 2003 C-Shape Blades, With 2 Ploughs SS 507

Grimme 1.8m Single Tiller, 2004 New C-Shape Blades SS 577

ScanStone 2 Body Bed Former, 2019 Auto Reset, Tail Pieces, Stabilisers SDM 087

ScanStone Pegasus Grass Topper 2018 SDM 069

ScanStone 2 Body Bed Former, 2015 New Points & Shares, Shearbolt SS 561

£5 Grimme CS1500 Web, 1995 Rake SB, Multi-Blade, 37, 27, 32 SS 389

OA £P

00 ,5 £7 ScanStone 2 Body AR, 2012 Auto Reset Ploughs SS 557

Standen 2 Body Bed Former, 2002 Point Markers, Auto Reset SS 562

£9

£8 Koning Planter, 1999 2-Row, Excellent Condition SS 513

Grimme 1.8m Single Tiller, 2005 C-Shape Blades SS 583

00 ScanStone 4 Body Mini Ploughs Auto Reset SDM 048

,8 Standen 2 Body Bed Former, 1995 Shearbolt SS 579

Grimme 2 Body Bed Former, 2005 Shearbolt, Shapeforma SS 580

£2

£5

£1

Standen 4 Body Bed Former, 2005 Markers, Auto Reset, Parallel Linkage SS 441

Standen 4 Body Bed Former, 2011 Auto Reset, Disc Markers, DW, PL SS 576

£1

50 Standen 1.8m Single Tiller, 2005 Spike Rotor SS 533

,9 Grimme 2 Body Bed Former, 2011 Disc Markers, Auto Reset SS 550

£9

£8

£2

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

Want to know more?

ScanStone 5.4m Triple Tiller, 2019 Intake Discs, QC Blades SDM 081

246 www.farmads.co.uk January 2020

fg_class_jan_20.indd 246

12/12/2019 12:00

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268 Want to know more? +44(0)7971 242 905 +44(0)7801 835 205 +44(0)7951 021 461 +44(0)7977 015 345 +44(0)7584 468 319 +44(0)1728 724 255 +44(0)7753 562 265 +44(0)1531 640 518 +44(0)1736 719 440 +353(0)87 193 4008 +44(0)7989 150 536

ScanStone

P O TAT O S Y S T E M S

USED STOCK UPDATED DAILY WWW.SCANSTONE.CO.UK

0 ,5 00

ScanStone 4 Webber Destoner, 2019 Star SB, Elevator-Ready, Levelling, Ex-D SDM 108

£2

£P ScanStone 5 Webber Destoner, 2018 Star SB, Multi-Blade, Mint Condition SS 594

00 ,0

,0 £5

5 £2

00 ,5

£3

Grimme GT170M Harvester, 2008 Mint Condition, Picking Table, LD SS 545

ScanStone 5.4m Triple Tiller, 2012 QC L-Blades, Soil Intake Discs SS 556

Grimme CW1500, 1998 Rake SB, Web, 1 Row Stars, Multi Share SS 525

Buy and sell online — www.farmads.co.uk

UN 2 Body Bed Former, 2004 Shearbolt Ploughs SS XXX

OA £P

£4

OA Grimme 1.8m Single Tiller, 2003 New C-Shaped Blades SS 507

0 00 8, Grimme GT170s Harvester, 2009 Excellent Condition SS 513

8, ScanStone 1.8m Single Tiller, 2011 QC L-Blades, Ploughs Sold Seperately SS 544

£P ScanStone 4 Webber Destoner, 2012 Star SB, Multi-Blade, Good Condition SS 595

£1

00 Standen MegaStar Destoner, 2004 Stone Box, Mint Condition SS 587

£2

50 ,7

£2 ScanStone 2 Body Bed Former, 2011 Shearbolt Ploughs SS 544

ScanStone 5.4m Straddle Tiller 2011 L-Shape Blades SS 513

£1 Grimme CW150 Destoner, 2008 Star SB, Mint Condition, 3 Rows Stars SS 596

ScanStone 4 Body Bed Former, 2019 Auto Reset, Chateau, DM, DW SDM 109

£5

00 ScanStone 2 Body Bed Former, 2006 Markers, Auto Reset, Mint Condition SS 588

OA £P

£1 UN 2 Body Bed Former 2004 Shearbolt Ploughs SS 591 and SS 592

ScanStone 2 Body Bed Former, 2019 Auto Reset, Chateau-Style SDM 092

£3

OA £P ScanStone 4 Webber Destoner, 2017 Star SB, Multi-Blade, Levelling, Mint SS 593

OA £P

OA £P ScanStone 2 Body Bed Former, 2019 AR+ Non-Stop System SDM 091

For any other parts, sales or service enquiries, get in touch with us today!

01307 818 000 contact@scanstone.co.uk www.scanstone.co.uk

January 2020 www.farmads.co.uk 247

fg_class_jan_20.indd 247

12/12/2019 12:02

LLANSILIN TRACTORS LTD AGRICULTURAL ENGINEERS

01691 791460

We are now members of the National Testing Scheme and can test your sprayers and granular applicators

Krone R320CV front and rear mowers in good condition ...........the pair POA Amazone ZA-V3200 Profis Tronic fertiliser spreader, year 2017 ............£7,570 Amazone ZA-M1500 fertiliser spreader .........................................................£1,950 KRM D2 Trend fertiliser spreader.......................................................................£1,500

We have in our yard a NEW DEMO

AMAZONE 6m CAYENA BOOK YOUR DEMONSTRATION NOW NEW!

MF 6613 c/w MF loader, 2017, 160hrs, Dyna 4, cab susp, Eco PTO

MF 8480 2008, 9800hrs, 50kph, f/linkage, front & cab susp, very tidy

Main Amazone dealers for Suffolk sprayers, spreaders, drills & cultivation

Genuine JCB Service and Parts available Pakenham, Bury St Edmunds, Suffolk IP31 2JS

01359 232155 • After Hours: 07768 007528 • E-mail: office@suffagri.co.uk

www.suffagri.co.uk

MF 8280 Xtra 2003, f/linkage, 5900hrs, 4 spools

MF 7618 2013, 2300hrs, Exclusive spec, Dyna 6, 50kph, 4 spools, guidance ready

MF 8260 Xtra 2003, 4700hrs only, f/linkage, excellent condition

MF 7620 2013, Dyna 6, Exclusive, 50kph, 4200hrs, f/linkage

MF 5475 Dyna 4, 2010, 6500hrs, front susp, CCLS

MF 6616 2015, 2300hrs, Dyna 6, f/linkage, 50kph, Eco PTO

Full range of DEMO TRACTORS available ex our yard at Pakenham Book today for your FREE demonstration

Visit our NEW website:

MF 6480 2005, Dynashift, 5300hrs, front & cab susp, CCLS, 90% tyres

MF 7626 2013, 4700hrs, 50kph, front & cab susp, air brakes, front links & PTO

Tine Seed/Fertiliser Drill

We are main dealers for Suffolk

MF 7718S Dyna VT, 2019, 50hrs, f/linkage, full susp, 4 spools, Data 4

MF 7716 2017, Dyna VT, 1900hrs, f/linkage, 50kph, 4 spools

68904

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

www.suffagri.co.uk

MF 6255 c/w loader, 2003, 7400hrs, air con, excellent condition MF 6270 1999, 12000hrs, good tyres, good condition

MF 6616 2016, 3500hrs, Exclusive spec, 50kph, air brakes, auto guide ready

Case MXM 175 2004 18 speed, cab susp, f/linkage, 7700hrs, excellent condition

MF 5712 SL 2016, 1700hrs, front susp, 540/38 & 440/28 tyres

John Deere 3050 1992, Power Synchron, nice original tractor

MF 7495 2008, 1800hrs, front & cab susp, f/linkage, air brakes, immaculate

John Deere 3200 telehandler 2002, c/w pallet tines, nice tidy machine

MF 7490 2004, 7800hrs, 50kph, f/linkage, front & cab susp MF 6499 2007, Tier 3, 6600hrs, 50kph, front & cab susp

Ford 5600 2wd, power steering, good condition New Holland FX58 forager 2001, 3800hrs, nice tidy machine Polaris 570 Quad Sportsman 2015, 200km, as new

email: llansilintractors@hotmail.co.uk For a full list of our stock please go to www.llansilintractors.co.uk

63266

VISIT US AT

HALL 20 / STAND 100

PARTS AND DISMANTLING

COMBINES: JOHN DEERE: T670i, W540, 9580 WTS, 2066, 2264, 2258, 2058, 1188, 1177, 1166, 1085, 1075, 1065, 985, 975, 965, 955, 952, 950, 630, 530, 8820.CLAAS: Lexion 600, 580T, 570T, 480, 460, 440, 430, 218, 118, 116, 115, 114CS, 108, 106, 105, 98, 96, 85, 76, 70 NEW HOLLAND: CR9080, CR980, TX66, TX68, TX36, TX34, TX32, TF78, TF46, TF44, TF42, 8080, 8050, 8040, 1500’s, 133 MASSEY FERGUSON: 7278, 40RS 38, 34, 31, 29, 27, 865, 760, 750, 665, 504.DEUTZ FAHR: 6090, 4090, 4080,4075, M3630, M3610, M2780, M2680, M1002.LAVERDA: 152, M120.CASE: 1660 JOHN DEERE TRACTORS 8520, 8400, 8200T, 7800, 7530, 7430, 6930, 6900, 6800, 6430, 6110, 3650, 3130, 2140, 2040, 1640 FORKLIFTS: JCB: 531-70, 530-70, 525-58, 520-4, 414, 926.CLAAS: Targo C50, K50 Ranger.MATBRO: Telestar, Teleshift, 280, 270, 250 MANITOU: 2600, MLT 633.MERLO: 40.7, 30.6 Multifarmer, 28.7, 26.6. JOHN DEERE: 3800, 3420, 3415, 3200, MASSEY FERGUSON: 8295.TEREX: 250 BALERS: NEW HOLLAND: 1210, 1010S, D1000, BB940, 841, 835, 7070, 750, 740, 654, 650, 644, 640.JOHN DEERE: 680, 644, 592, 590, 582, 578, 575, 550, 342, CASE: RBX435.CLAAS: Quadrant 2200,1200, Rollant 255, 280, 180, 46, 44, Vari, Hesston 4900, 4800, 4750. VICON: LB12000, LB8200, MP800, RV1602 WELGER: D6000, D4000, 520, 435.VICON: LB12000, LB8200, MP800, 1601, RV1602, MASSEY FERGUSON: No.5, 2190, 2170, 2160, 190, 187, 185.SUPERTINO: 60-120 MOWERS: KUHN: Alterna 500. JOHN DEERE: 328, 228, 131, 1360. POTTINGER: Novacat, Eurocat. KRONE: AM20, 32P, AMT 4000CV, Easycut 32CV LELY: Optima 240C. MAJOR: Toppers. FORAGER HARVESTERS: CLAAS: 930, 695, 690, 75

FOR PARTS CALL DAVE 07770814967

WWW.BURDENBROSMACHINERY.CO.UK

John Deere 997 Z Trak – 2009, 62” Deck, Diesel, Zero Turn, Hydro, 1866 Hrs, Good Working Condition

Deutz Fahr 4090 HTS – 1993, 20ft Header, Chopper/Chaff, 3302 Hrs, Lateral Tilt, A/C, Radio £15,750

John Deere 5100GF - 2016, 40k Power similar Reverser (24x12) A/C, 2 x SCV, Radio, PUH, 2942 Hours

MF 7272 Cerea - 2004, 20ft Powerflow Header, Trolley, Chopper, Chaff, AutoLevel, A/C, 2924 Eng, 1981 Drum Hrs Hydraulic Cover, Like New Condition £11,500

Bailey 12 Ton Trailer – 2012, 12 Ton, Sprung Drawbar, Hyd Tailgate, Hyd Brakes

New Holland TC54 – 1997, 12ft Header, Trolley, 2432 Engine Hours, Good Condition

248 www.farmads.co.uk January 2020

fg_class_jan_20.indd 248

12/12/2019 12:04

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

Downs Bloodhound 900 Telescopic Elevator

compact, self-contained, capable of up to 9.5tph average at 25kg bag size

telescopic elevator

Ref 6277

in stock for immediate delivery. call the office now for a special price Ref 6239

Swift Lift Packhouse Bulker Loading Elevator

Storemajor Grain Stockpiling Machine

NEW Wood Pellet Screening Plant

bulker loading elevator, c/w end safedown section

with 21m boom

a range of screen sizes are available, with or without loading conveyor

Ref 6263

Ref 5824

Ref 6189

HANDLING SOLUTIONS FOR AGRICULTURE, PORTS AND RECYCLING SCHEMES

Miedema LBV 1885 Telescopic Elevator

Prinsen 12 head Computer Weigher

18m long with feed conveyor

ex demonstration unit

DAVID HARRISON HANDLING SOLUTIONS LTD 9 Sand Lane, Aldreth, Ely, Cambs, CB6 3PH Tel: 01353 740666 Fax: 01353 741370 Email: sales@davidharrisons.com

Buy and sell online — www.farmads.co.uk

NEW Tong Midi Easyfill Box Filler

DAVID HARRISON HANDLING SOLUTIONS

New Prinsen PPM 600 Palletiser

69292

January 2020 www.farmads.co.uk 249

fg_class_jan_20.indd 249

12/12/2019 12:08

Powershift 4wd tractor

trsmith120@aol.co.uk www.trsmithagmachinery.com

TRACKS

£14,950+VAT c/w front weights, air conditioning & PUH

01763 780440 sales@oakfields-ag.com

2012 John Deere 6190R

Simba DTX 300 Trackman Rubber Tracks

2012, 5 deep tines, 2 rows of discs, DD packer More photos and full spec at

www.writtlefarmmachinery.co.uk

07748 004794 01245 442224(T) HYDRAULIC folding rolls, 6.2m wide, 24" rings, in good condition. £2,000+VAT. D Carter Tel 07768 935715/01255 860328 (Essex)

Tracks feature: ✔ Fully molded lugs for

unsurpassed durability and longevity. ✔ Exclusive patented galvanized cables for superior corrosion resistance. ✔ 50% more wires per inch meaning our track is more durable and longer lasting than the competition.

GREAT Plains SLD 4.2m, 2017, c/w Tilso Lo Disturbance legs, rear drawbar & hydraulic services, little used. £34,500 ono. A Whitehead Tel 07771 507279 (Norfolk)

52-69284

For more information contact

Tel: 01263 711474 sales@eurotrackltd.com www.eurotrackltd.com

TRACTORS

6200hrs, 50kph autopower, elec spools, tidy

CALL

53-69329

Eurotrack is pleased to offer Continental Trackman replacement tracks to fit most tractor makes and models. Also available to fit Lexion TerraTrac

JD6175R 50k Autopower, f/links & PTO, autotrac with SF 3000 dome & activation, 10” display, 4600 processor, 4 electric spools, very high spec tractor with a full John Deere service history, 3500hrs, reg 01.09.2015, 65 plate. POA. www.mktractors.com. MK Tractors Tel 07768 553833/01462 813390(T) (Beds)

Challenger MT765C

£46,950 £8,950

JOHN Deere 6150R, excellent condition, low hrs, John Deere Powergard to 5000hrs/end of June 2020. P Liverton Tel 07850 888002/01206 230662 (Essex)

01452 862232 07432 155017

www.crickleyhilltractors.co.uk 2001 Unimog U100, low hours, demount chassis, ex council. £7,000 no VAT. R Brown Tel 07970 064760 (Derbys)

FENDT Bill Bennett pick up hitch hooks (2), both came off a Fendt 716 but they should ﬁt all similar Fendts with Bill Bennett pick up hitches, dimensions 75mm x 300mm. GW Harrold & Partners Tel 01485 518244 (Norfolk) FRONT links for MF 8130, 8110, 3125 or similar, 3.5t, good condition. E Mackereth Tel 07966 381990/01524 272201 (Lancs)

Ex Demo Deutz-Fahr Agrotron 6165

53-69298

09 reg, 4450hrs, 5CCLS spools, 30” tracks, autoguide ready with GreenStar unit, night breaker lights, 8 idler weights

53-69310

TR Smith Ltd

01362 668286

JOHN Deere 8370R, 3314hrs, 50kph, Autopower, full spec, 4600 screen, autotrac, cab & front suspension, leather, passenger seat, 4 ECVs, PUH, Cat 4 linkage, 650 front tyres, 900 rears, Michelin Axiobibs all round. £97,000+VAT. M Houldcroft Tel 07496 387714 (Rutland)

53-69339

WEAVING stubble rake, 8m working width, had little use, full working order. £4,500+VAT. O Martin Tel 07703 846296 (Herts) FOUR genuine Cousins 24” breaker rings & six 24” Cambridge roll rings. GW Harrold & Partners Tel 01485 518244 (Norfolk)

John Deere 4455

MASCHIO New power harrows New rotary cultivators New flail mowers New spare parts Direct from an importer

51-69295

£76,850+VAT Ancroft Tractors 01289 331904 • 07977 916170

£76K+VAT

DEUTZ-FAHR 430 Agrofarm GS, 2011, 3150hrs, 110hp, front links & PTO, owned by us from new, tyres 95%, Powershuttle 40k & creep, 4 spools, good tractor. £25,500 ono. G Blandford Tel 07973 424473 (Hereford)

165hp, C Spec, RC shift, 300hrs, 650/65x38

Bruce Hopkins Ltd

bruce@brucehopkins.co.uk 07860 809708 Oxon

CASE Magnum Cat.3 top link hook end, brand new. GW Harrold & Partners Tel 01485 518244 (Norfolk)

Kubota M5111

NEW Holland T5.105, 2015, 3200hrs, Dual Command, TL740 euro head, 40kph, a/c, 3 spools, good spec, tidy. £32,500. L Rich Tel 07774 112211 (Glos) FRONT tractor weight, 3pt linkage, approx 650kg, with toolbox. £500. G Meadows Tel 07951 111182/01728 660577 (Suffolk) UNIMOG front D plate & hydraulic lift for snow plough, etc. £950 no VAT. R Brown Tel 07970 064760 (Derbys)

£43,995 +VAT

QUIVOGNE APX RS 6m X pattern disc harrows, hydraulic folding with rear drawbar & hydraulics, barn stored & in good working order. £4,250. J Baxter Tel 07770 860422 (Warks)

MOLE drainer, 3pl. £700. M Abblitt Tel 07720 839253 (Cambs)

110hp, 2/4wd, 22hrs, fitted quick release front loader, ex show stock

Contact Office 01480 473452 Tim 07710 678459 Graham 07739 091366 agsales@ibbetts.co.uk

Challenger MT775E Stealth Model 27/28

JOHN Deere front bolster weight, 110kg. £95 ono. M Banham Tel 07946 542816/01754 830581 (Lincs)

NEW Holland T6050 Plus, 2009, 3250hrs, full suspension, 40kph, a/c, good tyres. £30,000. L Rich Tel 07774 112211 (Glos)

JD6130M 40k PQ, 643 loader with m/docking, 1700hrs, full JD service history. POA. MK Tractors Tel 07768 553833/01462 813390(T) (Beds)

TWO 1t Fendt 900 Series rear wheel weights, surplus to requirement, as new. GW Harrold & Partners Tel 01485 518244 (Norfolk)

Tracked Tractor (2015)

2017 (67reg) Fendt 936, 2000hrs, warranty with tractor to 3000hrs, call for details. P Liverton Tel 07850 888002/01206 230662 (Suffolk)

£130,000 +VAT

3970hrs, 5 spool valves, 16 idler weights (57kg each), excellent condition

Contact Richard 07802 201869

53-69394

2019 6m Cambridge rollers, 20" rings, breaker rings & hydraulic levelling board, LED lights. £10,000+VAT. I Birnie Tel 07826 924386/07539 357586 (Aberdeenshire)

FASTRAC 2135 4ws, in good condition, 540 tyres, rear 80%, front 30%, owner driven, new battery, well maintained, regularly serviced, genuine low hours. S Frederick Tel 07909 531801 (Kent)

53-69107

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

CAMBRIDGE gang rollers. £275. J Ramsey Tel 01653 628366 (N Yorks)

VADERSTAD Rollex 620 crosskill roller with long drawbar, suitable for towing behind a NZA, good condition, new tyres & road lights. G Hitchcock Tel 07850 608249 (Suffolk)

51-68846

TILLAGE TACKLE (cont)

www.wilfredscruton.co.uk

JOHN Deere 6150R, excellent condition, low hours, John Deere PowerGard to 5000hrs/end of June 2020. Call for more details. POA. P Liverton Tel 07850 888002/01026 230662 (Suffolk) KIOTI CK35 Hydro, turf tyres, roll bar, 1060hrs. £7,450+VAT. MK Tractors Tel 07768 553833/01462 813390(T) (Beds)

250 www.farmads.co.uk January 2020

fg_class_jan_20.indd 250

13/12/2019 12:00

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

Import – Export Tractors & Agricultural Machinery

2012 CASE IH PUMA 140 POWERSHIFT 40km/h c/w f/Quicke 65 p/loader, full susp, 5168hrs, 600/65R38 f/tyres 50%, 540/65R28 45%, 4 hyd spool valve manual, hyd trailer valve, genuine tractor from local farmer £35,500

2011 CHALLENGER MT 765C c/w Caterpillar C9 engine 357hp, c/w 30’’ tracks, 4 hyd spool valve, Power Behond, Isobus sockets, c/control, leather seat, optional guidance system £74,000

2016 DEUTZ 5130 1649hrs 50kph with full suspension Stoll loader brackets, front linkage & PTO £34,750

2016 MF 7726 DYNA-6 EFFICIENT 1343hrs c/w front linkage, Isobus, Topcon guidance, 710/70R42 Michelin & full warranty till 04/08/2021 or 3500hrs A VERY SMART EXAMPLE! £74,950

KUHN VARIMASTER 180 5+1 REV PLOUGH hyd auto reset, H4 body, maize skimmers, hyd vari-width, hydr headstock susp, hyd depth wheel, r/transport wheel, for tractor 250hp & over £9,250

2010 KUHN VARIMASTER 152 5+1 variwidth, shearbolt, hyd depth control land wheel, rear discs, original mouldboard & new wearing parts £9,750

2013 GREGOIRE BESSON RB47 4+1 REVERSIBLE PLOUGH tractor mounted, mechl variwidth & f/furrow adjuster, shear bolt protection, r/discs & transport/depth wheel, new metal, ready to go £8,250

2013 KEENAN MECH FIBER 320 14 cu/m mixer wagon with 2013 additional bale handling kit, Pace monitor, c/w bale handling kit, weigh cell, Pace control box & new knife £8,950

2014 ROLLAND 5517 ROLLFORCE 5517 14t twin vertical beaters, slurry gate, sprung drawbar, 580/70R38 wheels £14,250

2016 PICHON M1450 twin vertical beater slurry gate, half split door hood 12t, done very little work £16,450

UNUSED ROLLAND ROLLVAN 52 CATTLE TRAILER with drop to the ﬂoor axle, partition sliding gate, cover sheet, side door, access door £12,500

2010 VADERSTAD RAPID RD A400S new shape tank. System discs, crossboard, new seeding discs/new coulters, follwg harrow & offset tyres done 3800ha, c/w full calibration kit & manual.£31850

07 KUHN HR 6003DR 6m hyd-fold quick ﬁt tines, clod board, new packer bearing & gearbox oil replaced excellent condition £12,000

2016 VADERSTAD SPIRIT ST600 6m, 2206ha, wide spacing (167mm), nice example

2008 HORSCH PRONTO 6DC with Muller box, 3800ha, from local family farm near Lincoln

POA

£28,000

2016 VADERSTAD CARRIER CR500 crossboard as ex demo £27,500

08 VADERSTAD RAPID RDA 600S 6m c/w pivot packer, X pattern system discs, offset wheels – 690/180-15 tyres 60%, r/harrow, pre & post em tramlining kit, hyd bout markers, control station £21,500

2008 KUHN HR 403D 4m quick ﬁt tines, clod-board, Maxipacker, done very little CHOICE OF OTHER KUHN HR4002 FROM £2,000

2014 LEMKEN ZIRKON 12K 600 6m c/w new genuine quick ﬁt tine, steel packer roller

2014 KONGSKILDE TIVE JET 4824 24m boom fertiliser spreader, c/w Tive Tronic microgranular kit

VOGEL & NOOT MAXIDRILL AT400 4m air seeder discs drill, hyd fan, demount kit, A frame, Mueller control box all in ex demo condition £5,750

ROLLAND CHOICE OF 4, 11, 12, 13, 15, 16, 17, 18 & 20 TONNES

KUHN AXIS 40.1 W 3000L weigh cell fert spreader c/w T25 Telemat border limiter, S4VXR 18-28m spreading disc, XL 1800 hopper ext, hopper cover, mudguards & Quantron E-2 control box, 2012 smart condition £5,750

Wishing all our customers a Merry Christmas & Happy New Year

JUST IN

£16,500

69218

ALSO CHOICE OF CR 650, 820 & 925 all with new genuine metal!

Buy and sell online — www.farmads.co.uk

2009 CASE IH QUADTRAC STX 535 4359hrs, r/linkage & PTO, 4 hyd spool valves, red leather seat, air con, drawbar, f/weight, Cummins QSX 14,9, Powershift 16×2 40km/h £82,500

Please note we will be closed between 20 December and 6 January

01673 885200 885200 01673

Mobile: Olivier 07831 240000 • Unit 10B Newtoft Business Park, Newtoft, Lincoln LN8 3WA • View full stock c/w photos on www.boccasion.com January 2020 www.farmads.co.uk 251

fg_class_jan_20.indd 251

12/12/2019 12:10

FOR ALL DRAINAGE AND SEWAGE TREATMENT PLANT NEEDS

COMPLETE DRAINAGE SOLUTIONS

Contractors Ltd.

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

ARE YOU READY FOR NEW SEWAGE STANDARDS FOR 2020? Is your property off the main sewage network? Do you have a septic tank? If so, we can install a new sewage treatment plant and provide a maintenace service. As well as servicing existing treatment plants, all to meet 2020s new sewage regulations.

FOR ALL DRAINAGE AND MOLE DRAINAGE TO HELP CONTROL BLACK-GRASS PROBLEMS LES 07831 191 525 | DARREN 07736 369 787

MARSH

ELMS FARM, WELLS CORNER, LAXFIELD, SUFFOLK IP13 8EG TEL 01986 798888 | FAX 01986 798889 | accounts@lescottoncontractors.co.uk

IRELAND’S FARM MACHINERY LTD BOSTON • LINCOLNSHIRE NEW, USED & HIRE MACHINERY

Carrington (Head Office) 01205 480460 Sutterton 01205 460600 Market Rasen 01673 842222

11394

TOYOTA HILUX ACTIVE

2017, double cab, 38,570 miles, 3 years warranty remaining £13,750 +VAT(JI) (JI)

10084

BAILEY 15T LOW LOADER c/w independent hyd. brakes, parking brakes, strap points £11,850+VAT(JI) (JI)

10047

www.irelandsfarmmachinery.co.uk

8591

1759

MERLO TF 35.7 - 115 C/W 3.5 tonne machine, 7m reach, 40kph, 115hp Deutz engine, Merlo hydrostatic transmission, approx 3900 hours. £32,000+VAT (TM)

BAILEY 20T BEETEAPER (2018) c/w sprung drawbar, arch full front window, roll over sheet, hyd. rear door £21,000+VAT (BF)

11526 BAILEY 8T CONTRACT TIPPER TRAILER c/w lights to RTA, ind hyd. brakes, parking brakes, 40mm EN8 towing eye, 6mm sides £7,750 +VAT (BF)

11660

KVERNELAND U DRILL (EX DEMO) c/w Cat 3 Cross Shaft, Strong compact central tube main frame, 3m Transport Width, 6m Folded out width (BF)

11570 ORSI HEDGECUTTER c/w 4.7m reach, cable control, hammer flails (80% good), PTO driven, 1.2m flail head. (JP)

11537

EX DEMO KVERNELAND QUALIDISC KVERNELAND LS PLOUGH (EX DEMO) C/W 5 furrow, No28 Bodies, Quick fit c/w 5m trailed, rear levelling points, Hydraulic front furrow, 18” rear harrow. Actipack with knives and disc, Maize skimmers scrapers, front wheels with hydraulic (BF) adjustment (JI)

11350

11573 EX DEMO KVERNELAND DTX c/w 3m working with, 5 Pro-lift Manual adjusting Tines (60cm spacing), Shearbolt protection (BF)

BAILEY 18T BEETEAPER (2017) c/w /w sprung drawbar, arch full front window, roll over sheet, hyd. rear door, grain chute (JI)

11539 KVERNELAND TURBO (EX DEMO) C/W 4 meter working width, hydraulic folding, 21 reflex tines (4 rows), 55x15mm reversible points

8618

11387

DOWDESWELL MA120 PLOUGH WITH CLAYDON FURROW CRACKER c/w single stays, 4+1, DD bodies £3,250+VAT (TM)

HALL ENGINEERING MUCK GRAB c/w 8’ wide, KV tines, JCB attachment brackets, pipework and fitting all supplied, tines are all straight. (MA)

Ben Ford (BF): 07469 853763 Matthew Ashton (MA): 07881 106298 Josh Pennell (JP): 07469 850502

11427

BAILEY 16T BEETEAPER (1999) Air and oil brakes, Sprung Drawbar, Front Flaps, Front window, Steel Mudguards, Flappy rear LED Lights + Flaps, £10,500+VAT (TM)

Stuart Gosling (SG): 07824 317357

Tom Mack (TM): 07387 023444 Jonathan Ireland: 07778 372606

252 www.farmads.co.uk January 2020

fg_class_jan_20.indd 252

12/12/2019 15:09

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

A DOWNING AGRICULTURAL ENGINEERS & MACHINERY TRANSPORT

unce We are pleased to anno we are now dealers for New NC 1850-14 14t I Series grain trailer dual air/hyd brakes, load sensing, r/over sheet, 560x60x22.5 tyres, hyd taildoor, g/chute & s/d/bar, Hardox ﬂoor £18,900 £18,500

with heater, 28hp, diesel engine, full cab lighting, 4-year war tipping body, ROPS, full road lic rau hyd e tonn half , 4wd turf or ag tyres cracking bit of kit mo

65 reg McCormick X60-40 110hp, front weights, a/c, 4wd, 40kph, aux hyd tank, passenger seat 1000hrs

New NC 16t tandem axle beaver tail with sprung ramps, plant low loader, hyd brakes & sprung drawbar

NEW McCormick X4-40M tractor, 4wd, 75hp engine, 12x12 speed transmission, spacious easy clean cab 0% Finance

Ex demo Ovlac FF 4+1 plough hydraulic furrow width, hydraulic front furrow, rear disc & depth wheel

Dalbo 6.3m compact hydraulic rolls

Pegoraro 3m power harrow packer roller, adjustable clod board, tine wheel eradicators

International Harvester B275 full engine overhaul, brakes, good tyres, receipts to warrant price, selling on behalf of a customer

McCormick X2.35 51hp 4wd, Rops, front weights, ag tyres

Ovlac 4f plough 2019, ex demo, reversible

£31,995

£29,854

June 2018 McCormick X6-430 & MC100 loader 121hp boosts to 130, 4wd, luxury a/c cab

POA

McCormick X8 available for demo now up to 310hp

£10,450

£17,500

£8,995

Available for de

Available for demo

£2,750

McCormick X7. 460VT 2019 (69 reg),165hp boosts to 175hp, VT drive, 50k, air brakes, precision steering ready, 4yr warranty, 0% ﬁnance POA

£3,600

International B434 full engine overhaul, great little tractor, work or play, selling on behalf of customer

Ovlac 4m disc 2019, ex demo model

£9,995

£18,750

£3,400

Buy and sell online — www.farmads.co.uk

tic Kioti CK3310 HST hydrosta r cto tra transmission compact ranty,

Kioti K9 utility vehicle

69067

NEW McCormick X4-440 2wd 75hp, 16x16 speed transmission, spacious easy clean air con cab, PUH, full warranty (library picture) £28,995

£23,995

OTHER MACHINERY New McCormick X7-690 Premium 50k, a/brakes, creep speed, RTK guidance, f/link PTO, available for demo . POA New McCormick X7-460 VT RTK guidance, front linkage, PTO, 50k, air brakes, available for demo .................. POA Pegoraro D3000 3m p/harrow, h/d, packer roller, eradicator tines, slip clutch, PTO ...................................... £8,995 Pegoraro W5000 fldg p/harrow, 250hp g/box, fluo system floating beds, track erads, packer rollers, adj clod board, in stock ............................................................................................................................. £19,500 2009 Reco Maschio 4m p/harrow, packer roller .............................................................................................. POA Tomlin 4’, 5’, 6’ & 8’ mowers.................................................................................................................from £875

Carlton Farm, Cattle Dyke, Goreﬁeld, Wisbech, Cambridgeshire PE13 4NR

AS Marston 32’ tandem axle flat trailer, air brakes, sprung drawbar ............................................................. £4,500 Bomford Bandit 2.5m flail mower, new flails, good working order ................................................................ £1,400 Downing 2.5m spring tine paddock harrow ................................................................................................. £1,295 2 x 6’ finishing mowers ...............................................................................................................prices from £575 Post hole borer tractor mounted, 12” & 9” augers, brand new sho[p soiled .................................................... £800 Selection of 2 and 4 wheel drive rough terrain forklifts .................................................................. Cheap to clear All prices plus VAT unless otherwise stated

Tel: 01945 410099•07850 731409 www.adowningengineers.co.uk January 2020 www.farmads.co.uk 253

fg_class_jan_20.indd 253

12/12/2019 13:05

the force behind the harvest

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

MF 2240 single axle baler, 2012 model Stock No 679, bale count 88,063, fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK.......................................... £43,000

MF 2160 single axle baler, 2013 model Stock No 781, bale count 92,338, fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK.......................................... £46,000

MF 2190 tandem axle baler, 2013 model Stock No 808, Approximate bale count 46,000 fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK.......................................... £55,000

MF 2270 tandem axle baler, 2015 model ***ﬁrst used 24.08.2016*** Stock No 820, bale count 22,531 fully serviced c/w hydraulic knotter blower, knotter & chain lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK.......................................... £72,000

NH BB9090 single axle baler, 2013 model Stock No 821, bale count 36,904, fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK.......................................... £50,000

NH BB9090 single axle baler, 2010 model Stock No 823, bale count 44,491, fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK.......................................... £46,000

NH BB9090 single axle baler, 2010 model Stock No 825, bale count 58,587 fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK......................................... £42,000

MF 2190 single axle baler, 2008 model Stock No 826, bale count 70,613 fully serviced c/w hydraulic knotter blower, knotter lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK.......................................... £38,000

MF 2270 XD tandem axle baler, 2014 model Stock No 827, bale count 44,377, fully serviced c/w hydraulic knotter blower, knotter & chain lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK ........................................................ £66,000

MF 2290 tandem axle baler, 2015 model Stock No 781, approx bale count 30,000, fully serviced c/w hydraulic knotter blower, knotter & chain lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK.......................................... £68,000

MF 2270 XD tandem axle baler, 2016 model ***ﬁrst used 03.06.2017*** Stock No 793, bale count approx 25,000, fully serviced c/w hydraulic knotter blower, knotter & chain lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK ...................................... £80,000

MF 2270 XD tandem axle baler, 2018 model ***ﬁrst used 15.07.2019*** Stock No 830, bale count 12,822, fully serviced c/w air brakes, hydraulic knotter blower, knotter & chain lubrication, ejector, roller chute, delivered with one season’s warranty in mainland UK ....... £100,000

Tel: 01489 896346 Fax: 01489 892188

All prices plus VAT

www.bigbale.co.uk e-mail: info@bigbale.co.uk 69398

254 www.farmads.co.uk January 2020

fg_class_jan_20.indd 254

12/12/2019 12:22

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

A family run business established in East Anglia for over 40 years

www.rneuston.co.uk

Complete Building Construction including...

69293

For all enquiries

t: 01449 720256 m: 07774 633608 e: m.euston@sky.com

Advantage Soil Conservation Vertical Tillage

Sabre Tines

Wilwyn, Flordon Road, Creeting St Mary Ipswich, Suffolk IP6 8NH

Rake & Roll

Targeted restructuring Fast cost effective Seeds & fine particles Stale seed bed are kept on the surface

Buy and sell online — www.farmads.co.uk

Steel framed buildings Complete groundworks Mechanical handling equipment Drive on timber floors Building refurbishment

Residue management ,Soil Conservation and No-Till Is at the heart of Tillso We provide British Patented Technology , due

to the success of our Sabre Tines we are now working with Pan Anglia to market & distribute Retro Fit SabreTines plus all wearing part, this will enable us to give our customers a better service with a large stock of genuine parts Tel: 01733 270 135

www.tillso.co.uk

January 2020 www.farmads.co.uk 255

fg_class_jan_20.indd 255

12/12/2019 15:08

Kubota M7172

TRACTORS (cont)

Enduramaxx water/liquid bowser

MF 6613 c/w MF loader

£86,500

Contact Office 01480 473452 Tim 07710 678459 Graham 07739 091366 agsales@ibbetts.co.uk

LLANSILIN TRACTORS LTD AGRICULTURAL ENGINEERS

01691 791460

53-69343

2017, 160hrs only, Dyna 4, cab susp, 3 spools, Eco PTO, 540/65/38 & 440/65/28 Michelin tyres, AS NEW condition

MF6480 2008, front & cab suspension, 40kph, 4 spools, Dyna 6 trans, Datatronic, front linkage, 460/85R38 rear, 360/85R28 front, 3890hrs, very genuine tractor, sale due to change in farm policy. £34,000+VAT. P Allen Tel 01328 830348 (Norfolk)

CHALLENGER 765C, 2011, 5600hrs, 30" track 85%, auto steer ready, with JD conversion if required, has been on a dealer service contract & is in mint condition. J Baxter Tel 07770 860422 (Warks)

TRAILERS

MF 7618

10,000L c/w chemical lockers, Super Single wheels, LED lights, hyd brakes

£8,000+VAT Other sizes to 16,000L built to order Chassis kits made for your tanks, pumps/pipework fitted as required Honda pump with 3 way taps and pipework

2013, 2300hrs, Dyna 6, excl. spec, 50kph, f/& cab susp, f links, 4 spools, Eco PTO, Data 4, gdnce rdy, 650/65/38 & 540/65/28 Michelin tyres at 60% gd

LLANSILIN TRACTORS LTD AGRICULTURAL ENGINEERS

11018954

01691 791460

2016 Kubota M128GX

MARSHALL 12t grain trailer, sprung axles, sprung drawbar, hyd tailgate, super condition, wide super singles, 2014 model. £8,750 ono bargain! R Edwards Tel 07967 828571 (Hereford) FIFTH wheel dolly, super singles, well made, tidy condition. £550. M Turner Tel 07774 765648 (Warks)

£950+VAT Visit

www.loggin.org to see what else we make!

Merrick Loggin Trailers 01280 702725

Mob 07799 836590

8-TON grain trailer, wooden body, ex lorry, twin axle, all straight & tidy. £1,995. W Campbell Tel 07738 955496 (Cambs)

JOHN DEERE 6130R 2017

AQ+ 40K, 24/24, Isobus/ Greenstar ready, 4100 7" display, 3ESCV, TLS, 750hrs. 53-69330

£38,950 LA2254 loader, 1300hrs, powershuttle, LED lights, immaculate

CALL

01452 862232 07432 155017

www.crickleyhilltractors.co.uk

£65,000 Call: Ed 07972 168251

MF 8730 £69,950 Exclusive Tractor

1995 John Deere 7700, 8400hrs, 40k Powershift, 4 spool valves, number four on joystick, 5t Lynx front linkage, European spec/7800 extended rear mudguards, full set of lights, including Beltline Michelin XM108 650/65/38 rears Michelin XM1. W Wilson Tel 07768 471280/01666 577285 (Wilts)

64 reg, 3030hrs, Dyna-VT, f/linkage, 710/70x42, 600/70x28, 70%, excellent condition, part ex

01530 229686 or 07831 113316

BENNETT Engineering pick up hitch from Fendt 724 (2012), tractor was exported & they didn't want hitch, so all in good working order. GW Harrold & Partners Tel 01485 518244 (Norfolk)

53-69185

www.midlandsagriplant.com

54-69258

CASE-IH 895, 1992, 6k hrs, Bomford loader & 4 in 1 bucket, gwo, 16x8, high & low powershift. £9,500. L Rich Tel 07774 112211 (Glos)

53-69409

JOHN Deere 6155R, 2016, guidance ready, 620/70/R38 rear, 600/60/R30 good tyres, lovely tractor to drive, large screen, good spec, weight not included, call for details. P Liverton Tel 07850 888002/01206 230662 (Essex)

FRONT weight block. GW Harrold & Partners Tel 07836 751076 (Norfolk)

TOW-A-VAN trailer, 10', ex-Lely service barge, recently overhauled with new tyres, brakes & electrics, good condition, lightweight, roller shutter access, Stronghold hitchlock. £1,950+VAT. R Maundrell Tel 07785 568800/01527 854834 (Warks) STRONG artic trailer with dolly, 32', used for Hesston bales. J Staight Tel 07761 631549 (Essex) IFOR Williams plant trailer, good condition, full rear ramp. £1,400 no VAT. R Brown Tel 07970 064760 (Derbys) HERBST 10t mini low loader, new, LED lights, tool box, sprung ramps, chequerplate ﬂoor, 18' long, beavertail, Herbst red. £6,750+VAT. MK Tractors Tel 07768 553833/01462 813390(T) (Beds)

LARRINGTON 1995 15t tri axle hi tip dump trailer, good condition. £4,500 ono. A Whitehead Tel 07771 507279 (Norfolk) WARWICK 14t grain trailer, 2008, hyd tailgate, sprung d/bar, super single wheels, genuine trailer very smart. £7,995. W Campbell Tel 07738 955496 (Cambs) CURTAINSIDE 13.6m tri-axle trailer. £1,750. K Ollett Tel 07753 859882/01359 270047 (Suffolk) 3-TONNE tipping trailer, in good working order. £425. M Banham Tel 07946 542816/01754 830581 (Lincs) BAILEY 18t TB, 2017, 560 tyres, silage kit, twin tipping pipes. POA. MK Tractors Tel 07768 553833/01462 813390(T) (Beds)

1991 Ford 7810

Series 3, A/C, 7200hrs, nice straight original tractor

53-69316

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

53-69106

+VAT ex-demo, 170hp, powershift transmission 30F/15R gears, 50kph, f/xle suspension, f/w front PTO/linkage, loader ready, 2018 68 plate, 350hrs, ex stock

Rodney Cowle Machinery

07786 391816

FENDT 724 Proﬁ Plus, 2016, 4600hrs, warranty to 5000hrs, front PTO, guidance, hydraulic top link, climate control, electric mirrors, Stoll 60.1 loader to suit also available. POA. M Harris Tel 07712 602322/01604 505783 (Northants)

FORD 4610, 1983, 4300hrs, tidy cab, no rot, good tyres, excellent starter, gear linkage needs attention. £4,650. C Bigley Tel 01406 540505/07909 910005 (Lincs)

www.farmads.co.uk

BAILEY 18t Beeteaper, 2018, air brakes, sheet, chute, front window, extra lights, rear towing loops, mud guards & ﬂaps, only been used on cereals, like new. POA. MK Tractors Tel 07768 553833/01462 813390(T) (Beds) INDESPENSION plant trailer, 10' x 6', 4 wheels, new tyres, ﬂoor, electrics, high tailboard, very straight, change of use forces sale, unused since rebuilt. Bargain at £1,200. F Danecker Tel 07885 491340/01494 758539 (Bucks)

SALOP S280 14t monocoque tipping trailer, 1989, hydraulic up & over back door, sprung axles & drawbar, 16/70x20 tyres, 8 stud, body needs attention, hence price. £1,250+VAT. R Maundrell Tel 07785 568800/01527 854834 (Warks)

256 www.farmads.co.uk January 2020

fg_class_jan_20.indd 256

13/12/2019 12:11

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

High quality used equipment sourced and sold by experts

Bobcat S70, 2014 571hrs, GP bucket, solid tyres & third line

Kramer KT356, 2017 2311hrs, forks, Kramer head, camera, a/c APUH & trailer brake

Joskin Quadra 16000, 2013 16000L capacity, Piton hitch, air brakes, rear steer axle, dribble bar & control box

Ehlo TR220, 2018 straw tedder, 2.2m working width

Challenger MT775E, 2016 2170hrs, 762mm, 5 electric remotes, Extreme Ag tracks, guidance ready, weights - 22 front, 16 idler & 18 on track frame

John Deere 7290R, 2016 2156hrs, Autopower, TLS, 4 electric remotes, front linkage, guidance ready, full suspension, Michelin 600/70R30 & 710/70R42

Challenger MT775E, 2015 2734hrs, 762mm, 5 electric remotes, Extreme Ag tracks, guidance ready, weights - 22 front, 16 idler and 18 on track frame

John Deere 8370R, 2016 2378hrs, Autopower, 4 electric remotes, f/ linkage, guidance ready, full suspension, Michelin 600/70R30 & 710/70R42

Massey Ferguson 6485, 2012 6402hrs, Dynashift, 4 remotes, f/linkage, front susp, 650/65R42 & 540/65 R30

New Holland T7.245, 2018 1031hrs, Power Command, 50kph, exhaust brake, full suspension, 98” bar axle, 4 mechanical remotes, Trelleborg 650/65 R42 & 540/65 R30

New Holland T7.245, 2018 905hrs, Power Command, 50kph f/linkage, exhaust brake, full susp, 98” bar axle, 4 mech remotes, 2 electronic mid mount valves, guidance ready, new Mitas 650/65R42 & 540/65R30

Case CX130D, 2017 5600hrs, 700mm tracks, 2.9m arm, hammer piping, safety valves, screen guard, 2 cameras, hitch, bucket

Hyundai HX140L, 2017 3142hrs, 700mm tracks, 2.9m arm, hammer piping, 360 camera, hitch & 2 buckets

Fendt 930 Pro� Plus, 2016 2305hrs, Vario, guidance ready, 4 electric remotes, front suspension and linkage 710/70 R42

More stock available, contact: Richard McTurk T: 07711 411 601 E: richard.mcturk@dllgroup.com usedequipmentsales.dllgroup.com

Buy and sell online — www.farmads.co.uk

Cat 216B, 2014 1324hrs, bucket, solid tyres & third line

69291

January 2020 www.farmads.co.uk 257

fg_class_jan_20.indd 257

12/12/2019 12:30

Trade advertising â&#x20AC;&#x201D; Tel: 01473 694455 Email: classified@farmersguide.co.uk

ESTABLISHED 1894

End of year clearance on nearly new stock machines... Ex-Demo Fendt 939V (2018) 1200 hours, warranty and 0% Finance* Ex-Demo Fendt 716 (2018) 1000 hours, extended warranty and 0% finance* Ex-Demo Fendt MT943 (2019) 280 hours, warranty and 0% finance* Ex-Demo Ideal 7 Combine (2019) 135 hours, ParaLevel base, 4WD, chaff spreader, 30 ft. header & trailer, warranty and 0% finance* New 5255L Combine (2019) 18 ft. header & trailer, chaff spreader, straw chopper, warranty and 0% finance*

Ex-Demo Mechron 2200 UTV K9 2400 Mechron UTV DK6010 Tractor CK2810 Tractor CK4010 Tractor c/w turf tyres CS2610 Tractor w. Mower

Ex-Demo 536-70 Agri Pro Loadall (2018) 1500 hours Ex-Demo 542-70 Agri Super Loadall (2019) 130 hours Ex-Demo 4220 Fastrac (2019) 520hrs, warranty to 3000 hours, 0% finance* Ex-Demo 4220 Fastrac (2019) 850 hours, warranty to 3000 hours, 0% finance* Ex-Demo 403A Wheeled Loader (2019) 24hours

Ex-Demo Valtra S274 (2019) Sisu engine & Fendt Vario transmission, 150 hours, warranty and 0% finance* Ex-Demo Valtra A124 (2019) 50 hours Ex-Demo A114MH c/w Loader (2019) Warranty and 0% finance* Ex-Demo T234D (2019) 600 hours, warranty and 0% finance* Ex-Demo T194V (2017) 1400 hours T254V (2018) 400 hours Various Valtra T234 Ex-Demo Models (Direct, Versu or Active) Valtra T174EA (2017) 1900 hours T214D (2018) 650 hours T144H (2017) 985 hours

All of these machines are available now at our very best pricesâ&#x20AC;&#x201D;enquire for details! 258 www.farmads.co.uk January 2020

fg_class_jan_20.indd 258

13/12/2019 09:44

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

Foxholes Depot: Providence Foundry, Foxholes, Driffield, East Yorkshire, YO25 3QQ Tel: 01262 470221 E-mail: sales@wilfredscruton.co.uk

Riccall Depot: Maxwell House, King Rudding Lane, Riccall, York, North Yorkshire YO19 6QL Tel: 01757 249799 E-mail: sales.york@wilfredscruton.co.uk

Website: www.wilfredscruton.co.uk

JCB 418S Loading Shovel 16 reg, 2872 hours, climate control, hyd locking q-fit carriage, LED worklights, 500/70 R24 tyres 20%, SRS, excellent condition

JCB 535-95 Loadall 18 reg, 578 hours, 109HP engine, 400/80R24 tyres 90%, joystick control, man. locking q-fit carriage, excellent condition

JCB 541-70 Agri Plus 16 reg, 3580 hours, air con, hyd locking q-fit carriage, 460/70 R24 tyres 50%, 33KPH Powershift trans, good condition

£48,000 + VAT

£44,000 + VAT

JCB 536-60 Agri Super 16 reg, 7037 hours, 40KPH transmission, air seat, air con, 460/70 R24 tyres 10% SRS boom suspension, hyd locking q-fit carriage

JCB 536-70 Agri Plus 12 reg, 4530 hours, 33KPH Powershift transmission, SRS boom suspension,PUH air con, 460/70 R24 tyres 10% hyd locking carriage

JCB 541-70 Agri Super 61 reg, 7030 hours, 40KPH transmission, air seat, hyd locking q-fit carriage, air con, trailer brakes, SRS boom suspension

Manitou MLT 634-120 PS 13 reg, 5380 hours, 40KPH Powershift transmission, boom suspension, air con, PUH, hyd locking carriage, hyd trailer brakes

Caterpillar TH336 12 reg, 2388 hours, 40KPH transmission, air seat, PUH 460/70 R24 tyres, trailer brakes, boom suspension, air con, hyd locking carriage

Fendt 939V Profi 14 reg, 4782 hours, 65KPH Vario transmission, new tyres, 295KG wheel weights front linkage, hyd top link, cab & axle suspension

Valtra T194V 65 reg, 2395 hours, power beyond, air/hyd brakes, 5 spools inc. low flow, push back hitch, front linkage, cab & axle suspension

£86,000 + VAT

£50,000 + VAT

£29,950 + VAT

£37,000 + VAT

£26,950 + VAT

Challenger MT775E 15 reg, 3970 hours, 5 spool valves, 16 idler weights (57kg each) Stealth Model No. 27 of 28 excellent condition

Challenger MT765B 09 reg, 4900 hours, 4 spool valves, power beyond, front weights, excellent condition

Challenger MT745C 12 reg, 5628 hours, 4 rear spool valves, front weights excellent condition

£70,000 + VAT

£68,000 + VAT

£130,000 + VAT

JCB 527-58 AG Loadall 18 reg, 660 hours, 40KPH hydrostatic transmission, 109HP engine, hyd locking pin & cone carriage, air con manufacturer’s warranty

£28,500 + VAT

£120,000 + VAT

JCB 536-60 Agri Plus 66 reg, 3314 hours, 33KPH transmission, PUH, air con, SRS boom suspension, hyd locking q-fit carriage, new 17.5 R24 tyres to be fitted

£28,750 + VAT

Buy and sell online — www.farmads.co.uk

and a wide range of quality used machinery

£70,000 + VAT

VISIT OUR WEBSITE TO SEE OUR USED STOCK, INCLUDING USED LOADALLS COMPLETE WITH LOLER TEST, SERVICED & FINANCE*

* Finance is always subject to terms, conditions and acceptance by the provider. January 2020 www.farmads.co.uk 259

fg_class_jan_20.indd 259

13/12/2019 09:45

PAIR of Yokohama Geolandar A/TS GO12 tyres, 5mm tread. £80; also pair of Yokohama Geolandar A/T GO15 tyres, 8mm tread. £120. B Powers Tel 01945 780322 (Cambs)

TYRES & WHEELS 11.2-R48 rowcrops, off Ford 8340, Kleber tyres on heavy duty wheels. £195+VAT ono. R Maundrell Tel 07785 568800/01527 854834 (Warks)

TRELLEBORG ﬂotation wheels & tyres with bolt in centres, 2 rear 580/70-R38 85% tread, 2 front 540/65-R28 85% tread. £3,680+VAT; also one front 540/65-R28 50% tread (tyre only). £80+VAT. L Baker (Tramspread Contracting) Tel 07823 402815 (Suffolk) 600/55X22.5 wheel & tyre (one), 50% good. £200+VAT. AW Smith & Sons Tel 07712 652267/07712 593105 (Suffolk)

Turf wheel & tyres 22.5LL-16.1 & 12LLx16

www.bwt.uk.com info@bwt.uk.com

£350 www.jmurrell.co.uk

01493 750999

At BWT we specialise in new and used wheel solutions for Rowcrop, Standard, Dual Wheel & Flotation applications.

55-69093

MARKET LEADERS

IN AGRI Let us solve YOUR Agri Tyre and wheel problems

OVER 40 YEARS EXPERIENCE

Wheel barrow to Combine we have the answer!

DISCOUNTS FROM 25%

Call us now with your requirements

01371 832310 BF Goodrich tyres (2), new, unused. £250 each ono. R Seaborne Tel 01452 790519 (Glos) TRELLEBORG 16.9-R28 front tractor tyre, 25-30% tread. £100+VAT. C Cornish Tel 07880 976137 (Suffolk) REAR wheels, 20.8.38, off 4055 John Deere with shaft centres. £400. R Brown Tel 07970 064760 (Derbys)

All makes sold

•SPECIALISED WHEEL APPLICATIONS

•FLOATATION

SPECIALISTS

Call Stuart on:

01328 862 332 07736 271058

ASSEMBLIES

•STOCK DUAL WHEELS NEW/USED

•WHEELS AND CENTRE DISKS

•WHEEL MODIFICATIONS •SECOND HAND & PART USED

•PART EXCHANGE CONSIDERED

t Col ontac

in Sim

0 805000881 1 3 8 7 6 0 01205 4 els.com

Tel

PAIR of Michelin VF 710/60-R38 wheels tyres, 95% tread, to ﬁt NH 6.175. £4,000+VAT. D Carter Tel 07768 935715/01255 860328 (Essex)

lodgetyre.com

BROUGHTON ejector trailer, donkey engine, tested, all good. R Hopkinson Tel 07976 424263 (Lincs)

SET of wheels & tyres taken off Ifor Williams trailer. £100. D Pike Tel 07789 927662 (Norfolk)

18X38" Ford wheel rims, heavy duty, tidy condition, suitable for 600/65-R38 tyres. £300+VAT. R Maundrell Tel 07785 568800/01527 854834 (Warks)

John Deere 6320 rowcrop wheels 270/95-R44 & 11.2-R28 FLOTATION tyres from John Deere 7810 (rears only), 50% tread, 800/65 R32, re-advertised due to being let down by previous buyer. £1,000. D Pike Tel 07789 927662 (Norfolk) 18.4-R38 & 14.9-R28 Goodyear tyres with John Deere solid centres, ex 6920, tyres all even at approx 40% good. £1,150 ono. R Dean Tel 07999 038590 (Cambs) ONE Continental tyre 340/85/24, 50% tread. £100. D Houghton Tel 01775 640296 (Lincs)

£700 www.jmurrell.co.uk

01493 750999

55-69248

BROUGHTON ejector trailer, donkey engine, electric start, long test, all good. R Hopkinson Tel 07976 424263 (Lincs)

STOCKS duals, 3 clamps, 600/70R34 Trelleborg TM900 @65%. £2,750+VAT for the pair. J Burroughs Tel 07775 755914 (Essex) PAIR part worn, 420-85-R38, picture available. £250 ono. T Foss Tel 01604 770466/07711 283234 (Northants) 710/70X38 JD rear tyres & wheels (pair), 95% good. £2,350+VAT. AW Smith & Sons Tel 07712 652267/07712 593105 (Suffolk) NEW 2 Titan 12 ply 23.1x26 diamond tread turf tyres, c/w 8 stud wheels, to ﬁt Kioti mid size tractor or Hesston baler wheels. £1,100+VAT for both. R Lane Tel 07831 615912 (Cambs)

25X26" wheels to take 28.1-R26 tyres, suit Case Maxxum/MX/ Renault, etc, two ﬂanges for track width options, pair. £200+VAT. R Maundrell Tel 07785 568800/01527 854834 (Warks)

•ROWCROP WHEEL

ndwhe .com yresa ls lturalt u dwhee c ri a g a res n sales@ riculturalty g www.a BOSTON

Part exchange welcome 2008 24' AW trailer, with detachable steel cattle body, 3 compartment, 2 door, chequer plate ﬂoor, twin axle 385/65 R22.5 super single tyres, hydraulic brakes, road lighting, good used condition. D Pither Tel 01452 864714/07973 186628 (Glos)

HONDA CRV genuine alloy wheels, to ﬁt 2013-16 models, 225/60R18 (4), tyres 60% good. £400. A Towns Tel 07751 917839 (Lincs)

270X95R36 Kleber rowcrops for Sands sprayer (4), 75%, heavy duty adjustable wheels, c/w spare rim. GW Harrold & Partners Tel 01485 518244 (Norfolk)

Formerly

TYRES

PAIR of Continental 520/85-R38s, at least 60% tread, some cracks on shoulder where lugs meet sidewall, but all good inside & no repairs. £650 ono. R Dean Tel 07999 038590 (Cambs)

55-68956

T&F dump trailer, 10t, lights & brakes, good muck trailer. £4,500. L Rich Tel 07774 112211 (Glos)

AGRICULTURAL TYRES & WHEELS

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

TYE 4t tipping trailer, good condition. £1,000 ono. Hunt Bros Tel 07702 734715(T)

IFOR Williams type LT126G, 2t, 12’ long with sides & spare wheel, tidy trailer. £1,595. D Leigh Tel 07502 661861 (Northants)

55-69247

TRAILERS (cont)

13.6X36 Stomil tyres, 60% tread, on Ford square pan rims. £350. B Powers Tel 01945 780322 (Cambs)

BRAND new set of Fendt 700 Series Bridgestone VT Trac tyres, on genuine Fendt rims, 540/65 R30 Bridgestone VT Trac 650/65-R42 Bridgestone VT Trac tyres, brand new, rims approx 4/5yrs old, in perfect condition. GW Harrold & Partners Tel 01485 518244 (Norfolk)

260 www.farmads.co.uk January 2020

fg_class_jan_20.indd 260

13/12/2019 12:25

fg_class_jan_20.indd 261

13/12/2019 12:26

And this one...

Farmers Guide

www.FarmAds.co.uk

And so did this one.

This little piggy went to market.

Trade advertising — Tel: 01473 694455 Email: classified@farmersguide.co.uk

3 YEAR WARRANTY

m ipsum

ASK ABOUT OUR PAY AS YOU FARM PLANS CALL 01386

49155 OR VISIT WEAVINGMACHINERY.NET

262 www.farmads.co.uk January 2020

fg_class_jan_20.indd 262

13/12/2019 11:26

FARMERS - Advertise your ‘for sale’ and ‘wanted’ on-farm machinery for free. See coupon on page 268

£150,000 +VAT

300hp, 16 speed, variopilot, front PTO, 4x hydraulic valves, rear PUH, air trailer brakes, 495-70R24 tyres

TRUCKMAN lockable canopy for Hilux (2016 onwards) DC, colour Crimson Spark, includes 2 keys, all ﬁttings & ﬁxtures, plus body liner, as new condition. £1,200+VAT. R Jackson Tel 01691 860359 (Shrops)

MITSUBISHI L200 Warrior Double Cab, 2017 17 plate, silver, 45000 miles, FSH, balance of manufacturer's warranty, high spec, including towbar, leather seats, sat nav, rear camera, Isoﬁx, heated front seats, DAB radio. £14,500+VAT. J Pickard Tel 07949 265498 (Lincs)

COUNTRY VEHICLES Land Rover Defender 90 station wagon, new galv chassis, 97P .............. £8,995 Land Rover Defender 110 200 TDI, 86C ............. £3,495 Land Rover Defender 110 hard-top, 91J, 65,000 miles, blue ........................... £4,995

TVO Ferguson tractor, needs tyres & fuel bowl, but otherwise complete – an easy restoration. H Ashton Tel 07831 588318 (Lincs) JOHN Deere 3130 2wd tractor, f/w Econ HM2 hedge trimmer. £5,485. D Leigh Tel 07502 661861 (Northants) LISTER Blackstone vintage hay rake. £250. J Ramsey Tel 01653 628366 (N Yorks) TRACK Marshall 90, c/w blade, linkage & exts. H Ashton Tel 07831 588318 (Lincs)

WINDSCREEN glass in frame for Fitzmeier cab. S Bane Tel 07826 306935 (Norfolk)

mobile 07973 139483

MF IND 203 Mkll with front end loader & David Brown back hoe, all in working order. £2,750. H Taylor Tel 07985 655527 (Norfolk)

MITSUBISHI L200 double cab pickup, 4life spec, 2019 69 reg, Amazon green. c/w tow bar, bed liner, roof rails, rear parking sensors, CD/radio, phone bluetooth & air con. £19,975+VAT. P Kimberley Tel 07836 334459 (Worcs)

STOCKS duals, 6 clamps, 710/75R42 Trelleborg TM900 @75%. £5,000+VAT for the pair. J Burroughs Tel 07775 755914 (Essex) MICHELIN tyres off Manitou, 17.5 LR 24, two @30%, one @25%, one @10%. £300 ono. C Baines Tel 07840 763943/01206 735421 (Essex) TOYOTA Hilux Invincible DC 4 door pickup, Sept 2011, manual 65000mls, 12 months MOT, leather seats, body liner, tow hitch, used mainly as second vehicle with little towing, no ﬁeld work or farm use, above average condition inside & out. £10,750+VAT. R Jackson Tel 01691 860359 (Shrops)

RICHARDSON livestock trolley, c/w pig net & ramp (serial no 612), very tidy. £300 ono. D Sworder Tel 07970 105915 David/07775 946857 George (Herts)

home/fax 0115 965 2204

2011 Land Rover Freelander 2.2 Td4 GS, 6 speed manual, superb condition inside & out, roof rails, climate control, 1 owner from new, 77k miles, with FSH. £7,999. S Powell Tel 01454 324486 (Glos) WHEEL adaptor plates, bolt in centres for Russians/Terras, etc, to ﬁt a Gima rear axle, ie Massey Ferguson <6480 or Renault/ Class 500/600 Series, unused, £100+VAT. R Maundrell Tel 07785 568800/01527 854834 (Warks)

MF135 (1967) & Fleming 6' mower, both in vgc. £4,850 but can split. M Wheeler Tel 01892 722532 eves & ansaphone/07808 200404 (Kent)

DAVID Brown LQ12 loader brackets, with 3 slice Kontak valve, will split if not required. M Turner Tel 07774 765648 (Warks) IH125B Drott 4-in-1 bucket with no cab. £1,750. D Leigh Tel 07502 661861 (Northants) DAVID Brown 950 with David Brown front end loader. £2,200. H Taylor Tel 07985 655527 (Norfolk) GREY Ferguson TE20, petrol or parafﬁn, gwo. J Adams Tel 07812 367009 (Worcs) IHC Drott, built on IHC 414, would make BTD5. H Ashton Tel 07831 588318 (Lincs)

RANSOMES trailed plough, working order, to suit TM55 or similar. H Ashton Tel 07831 588318 (Lincs) IH955 2wd tractor, f/w Econ HM3E, needs TLC. £6,475. D Leigh Tel 07502 661861 (Northants)

OLD metal saw, 240 volt, could be converted to run off a stationary engine. £50 no VAT. D Ivens Tel 07969 877834 (Northants)

WORKSHOP EQUIPMENT

1981 Massey Ferguson 265 8 speed 2wd

FREELANDER 2 HSE 2.2 diesel, 08 plate, grey bronze metallic paint with black full leather seats, four 70% good winter tyres, full service history, 122000 miles, v tidy family vehicle, not used on farm, lots more photos & video available. £4,250 ono. A Towns Tel 07751 917839/01427 754145 (Lincs)

VINTAGE & CLASSIC DAVID BROWN TRACTOR PTO GUARD UK made, £70+VAT inc UK mainland delivery. Contact Simon on 07789 793721

£7,950 no VAT with Duncan cab & only 3434 genuine hours!

01763 780440

TWO-WHEELED transport trolley, well made. £50 no VAT. D Ivens Tel 07969 877834 (Northants)

58-69338

SET of Goodyear Terra tyres, back 66*43.00-25 8 stud bolt in centre, front 600/55–26.5 Alliance 10 stud, off Claas Arion 620. £900. G Lister Tel 07966 179440 (E Yorks)

www.farmads.co.uk

INTERNATIONAL 444, 1974, gwo. J Adams Tel 07812 367009 (Worcs)

Dave Smith:

DAF LF45 150, 2005, 7.5t lorry, ﬁtted with recovery body & hydraulic winch, good starter & tyres, but no test. £1,895. J Weston Tel 07803 270448 (Lincs)

Submitting a FarmAd has never been simpler – just go to...

FERGUSON TEF20 diesel, very original, in good working order, c/w roll bar, has original V5 document, reluctant sale, registration: ORM 415. £2,750. K Bristow Tel 01363 772965 (Devon)

Contact Office 01480 473452 Tim 07710 678459 Graham 07739 091366 agsales@ibbetts.co.uk

DAIHATSU Fourtrak TDX. £400. R Hopkinson Tel 07976 424263 (Lincs)

STOCKS Dual wheels, 20.8R38s, Kleber tyres 30%, 10" bands, no clamps. £200+VAT ono. R Maundrell Tel 07785 568800/01527 854834 (Warks)

TOYOTA Hilux 4wd King Cab, c/w Ifor Williams canopy, 56 reg, 134K, tow bar. £1,600+VAT. A Whitehead Tel 07771 507279 (Norfolk)

Buy and sell online — www.farmads.co.uk

FLOATATION tyres, 7/50/65R28L. R26 BKT Agri Teris on 12 stud rims, ﬁt Multidrive/JCB Fastrac, 2 tyres as new, 2 tyres 75% tread, can deliver. £2,500+VAT ono. G Hoare Tel 07985 055250/0113 285 3530 (W Yorks)

Unimog U530

57-68838

SELECTION: one 14.9 R28 Kleber (35%), pair of 600/70R34/Kleber Super 15 (25%), one Michelin MachXbib 650/85R38 (30%); rowcrop Taurus Soil Saver RC95 270/95R42 (4) 50%; Nokia Tractor Forest 18.4-38 tyres (2) 20%. £100+VAT each. GW Harrold & Partners Tel 07836 751076 (Norfolk) 600/33X22.5 wheels & tyres (pair), 100% good. £850+VAT. AW Smith & Sons Tel 07712 652267/07712 593105 (Suffolk)

VEHICLES

57-69105

TYRES & WHEELS (cont)

sales@oakfields-ag.com

IH444 2wd tractor with loader & fork. £1,750. D Leigh Tel 07502 661861 (Northants) PERKINS 270 D engine. £375. H Taylor Tel 07985 655527 (Norfolk) TRACK Marshall 55, c/w 4 cyl Meadows engine & backplate/ conversion plate to match the two together. Christmas project! H Ashton Tel 07831 588318 (Lincs)

STRONG plastic storage boxes, large quantity available, L 280 x W 205 x H 140. £1 each no VAT. D Ivens Tel 07969877834 (Northants)

January 2020 www.farmads.co.uk 263

fg_class_jan_20.indd 263

13/12/2019 12:37

WANTED

David Smith 01353 861694 07968 661115

59-68996

LINCOLN Longwool ďŹ&#x201A;ock books & Suffolk horse sale catalogues. D Coe Tel 07867 578854 (Suffolk)

SCRAP METAL All types of scrap combines, sugar beet harvesters, tractors & machinery

Tel: 07785 937779 or 01953 454462

Norfolk Farmer requires John Deere 6910S tractor

Zetor tractors

Please email your machine to

info@jamesmurrell.co.uk or call

01493 750999

rgb4x4.co.uk

01277 822001 59-69243

07770 692891 www.jmurrell.co.uk

POULTRY cage ďŹ&#x201A;oors required for reuse, all types & quantities considered. O Gronning (Heart of England Farms) Tel 01926 843460 (Warks)

WANTED Established East Norfolk Shoot business (CNA Sporting) requires upland, woodland & ponds for this coming 2020 shooting season & beyond Sizeable blocks required to establish/rotate maize covers and release game birds, ideally Norfolk & Suffolk areas but anything considered We offer Professional Game Shooting Stalking and Gun Dog Trial Days for experienced guns HIGH RENTS PAID FOR GOOD TENANCIES

Call Craig on 07711 177007

J J Gray Antiques & Architectural Salvage

D E T N WA all items considered from antique furniture, garden items & farming bygones Also house clearances undertaken Covering East Anglia

59-69331

Please email details to

farm@murrell1.plus.com

BOBCAT 443, 453, 463 or S-70. J Adams Tel 07812 367009 (Worcs) LARGE childrenâ&#x20AC;&#x2122;s park slide, the older the better. D Brown Tel 07710 316205/01487 822280 (Cambs) PULLEY (twin V belt) 14â&#x20AC;&#x201C;18" diameter, to ďŹ t shaft 1.25â&#x20AC;&#x201C;1.5", most likely off an old cement mixer or farm elevator. J Goddard Tel 01508 531055 (Norfolk) NEW wooden bearings to ďŹ t Ferguson mounted disc harrow; also Fiskars plough boards KHN model 14â&#x20AC;&#x201C;16" furrow. R Gear Tel 01595 890295 (Shetland)

t 01953 453827 m 07765 633356

e jaygray72@icloud.com

Norwich, Norfolk

www.jmurrell.co.uk

59-69244

59-68997

Most models required

Do you have a TRACTOR or TELEPORTER? Can you help with SNOW CLEARANCE? Local sites to you - FAST PAYMENT

www.ground-control.co.uk

Norfolk farmer & contractor requires Fendt Tractors

AF45 trencher, PTO driven, in working order. B King Tel 07712 334848 (Essex) LAMB/SHEEP weigh, in good working order, North Yorkshire area. J Ramsey Tel 01653 628366 (N Yorks)

WANTED

0845 180 1272

Caring for our Environment

4-METRE front press with levelling boards or heavy duty tines. C Cornish Tel 07880 976137 (Suffolk)

WANTED

DEAD OR ALIVE PERKINS/ ROLLS ROYCE DIESEL ENGINES & GENERATORS

CASH 59-69257

ION COLLEAnyCTPower N O D I A P Any Condition Collection Service Available

NORWICH ROAD DEREHAM

01493 750999 www.jmurrell.co.uk

www.atkin-farm-machinery.co.uk

LAMB/SHEEP weigh, in good order, ideally North Yorkshire area. J Ramsey Tel 01653 628366 (N Yorks) JOHN Deere 750A 6m drill, ideally ďŹ tted with Guttler closing wheels. J Baxter Tel 07770 860422 (Warks) JCB 520-50 loadall. B Brown Tel 07768 038369 (Cambs) OFFSIDE panel cover (tinwork), any condition, for a Ford 655C digger. A Gregory Tel 07904 988906 (Essex) SIX curved Nissen hut irons, 9' long, 2" x 2" size. C Sharpe Tel 01359 252022/07780 677631 (Suffolk) LEVEL ďŹ&#x201A;oor grain laterals. R Creasey Tel 01526 860228/07986 165132 (Lincs) SANDERSON 622 Teleporter parts, anyone breaking one for spares? J Bunning Tel 07931 331953/01945 780344 (Cambs)

WANTED

FORD/NEW HOLLAND TRACTORS

1965â&#x20AC;&#x201C;2012

JCB TELESCOPICS 1998â&#x20AC;&#x201C;2012 BUNNING SPREADERS

or email rob@cadwaladr.co.uk

JOHN DEERE TRACTORS 4050 THROUGH TO 4955

For all your SAM WILSON samantha@farmersguide.co.uk CLASSIFIED TRADE ADVERTISING contact... 01473 694455 or

Tel: Dereham (01362) 692104/637332

Email details to farm@murrell1.plus.com

For further info please call

ALUMINIUM milk churns with lids, cream cans, etc; also drawknives for making wooden hurdles. R Short Tel 01525 377361 (Beds) GRAYS Multiharrow, 4m, c/w discs, any condition considered. P Baird Tel 07831 246400/01764 681264 (Perth & Kinross) FORD Consul Mk2 1958-62, decent or spares/repair please, or even an E type... J Weston Tel 07803 270448 (Lincs)

Used Tractors and Good Clean Farm Equipment

ATKIN FARM MACHINERY

ROUND BALERS â&#x20AC;&#x201C; McHALE, CLAAS, KRONE & WELGER

Rob on 07702 520447

WANTED

59-68998

Top Cash Paid+VAT

YOUNG working farm cats. L Hitchcock Tel 07860 448433 (Suffolk) DO any of you old Renault tractor dealers have a rubber ďŹ&#x201A;oor mat for a 1986 Renault 145-14 4wd tractor, plus a few front wafer weights? C Flatters Tel 01775 640112 (Lincs)

S Gray Recycling

59-68995

snow@ground-control.co.uk

ASALIFT onion topper with rotating bar & paddle. D Brown Tel 07710 316205/01487 822280 (Cambs) TRACTOR rears 12x36, good casings, 60% plus tread, 1 or 2 pairs. M Banham Tel 07946 542816/01754 830481 (Lincs) AFT-TRACTOR trenching machine. R Creasey Tel 01526 860228/07986 165132 (Lincs) JOHN Deere 7820/7810 or similar with Powrquad box. R Wilson Tel 07734 245204 (Co Antrim) GRAYS Multi Harrow c/w discs, any condition considered, please phone and/or email photos & particulars to phb11@tiscali.co.uk. P Baird Tel 07831 246400/01764 681264 (Perth & Kinross) WEBB 5 cell wheels, EP 32. M Richards Tel 01284 828365/07887 964514 (Suffolk) FOLLOWING harrow to ďŹ t KRM RTi 3m drill, or complete machine for breaking. R Fletcher Tel 07977 034535 (Norfolk) DROMONE pick up hitch to ďŹ t Case Maxxum tractor. J Adams Tel 07812 367009 (Worcs) CRAWFORD reversible trailer plough, any condition considered. C Bacon Tel 07811 162299 (Derbys)

WANTED

JCB 3XC 4x4 Sitemaster wheeled digger

sales@robertwraightltd.com

07836 540559

59-65022

DRAWBAR for a 1986 Renault 14514 4wd tractor. C Flatters Tel 01775 640112 (Lincs) LELY 4m Polymat, drill only. C Cornish Tel 07880 976137 (Suffolk) BUNNINGS Highlander 12t muck spreader. C Eagle Tel 01603 759678 (Norfolk) MINIMAT press drill with seed box. T Wrinch Tel 07912 157988 (Suffolk)

Email your machine to

info@jamesmurrell.co.uk or call

01493 750999 Norwich, Norfolk

www.jmurrell.co.uk

59-69246

â?&#x161; Combines â?&#x161; Sugar Beet Harvesters â?&#x161; Tractors â?&#x161; Trailers â?&#x161; Cars â?&#x161; Vans â?&#x161; Lorries â?&#x161; Trucks

TRAILED FORAGE HARVESTERS in good condition â&#x20AC;&#x201C; JD, NH, Mengele, Pottinger, Claas, Taarup, JF & maize headers to suit. Full details to GDO Howell Tel 07903 089391 & 01728 723683(T) (Suffolk)

CARAVAN (not mobile home) required for worker accommodation, as near Robertsbridge as possible, condition doesn't matter, as long as it's towable. R Hamilton Tel 07807 299962 (E Sussex)

59-69245

WANTED

JONES Panascopic loader for spares, or sell mine needing some attention for ÂŁ3,500. J Weston Tel 07803 270448 (Lincs) DISC gangs, heavy duty for spares, 6â&#x20AC;&#x2122; long shafts with legs & bearings, etc, or complete cheap set to break, must be really beefy though! J Weston Tel 07803 270448 (Lincs)

59-63327

SCRAP

59-69108

Trade advertising â&#x20AC;&#x201D; Tel: 01473 694455 Email: classified@farmersguide.co.uk

ACCORD Kverneland Mini Air for drilling onions. D Brown Tel 07710 316205/01487 822280 (Cambs) MINIMAT press drill with seed box. T Wrinch Tel 07912 157988 (Suffolk)

NICKI WATERS

nicki@farmersguide.co.uk

01473 694456

Farmers

Guide k

ads.co.u

www.farm

264 www.farmads.co.uk January 2020

fg_class_jan_20.indd 264

12/12/2019 15:03

Farmers Guide

Recruitment and About People — www.farmersguide.co.uk/situations-vacant

RECRUITMENT and About People Tel: 01473 691888 email: classified@farmersguide.co.uk www.farmersguide.co.uk/situations-vacant

Claydon Drills has appointed Akos Hutoczki to the role of aftersales and service manager, as part of an ongoing expansion programme to meet rising global demand for the company’s crop establishment products. Commenting on his new position, Akos said: “I am delighted to be joining Claydon at such an exciting stage in its development. “My role is to act as a link between the company, management team, manufacturing and service staff, together with our growing network of dealers on all aspects of after sales and service. My responsibilities include the development and implementation of training programmes and procedures to ensure that dealers’ sales staff and service technicians

have all the information that they need to ensure that Claydon customers receive the best possible service, wherever they are located.” Having grown up on his family’s arable and livestock farm in Hungary, Akos always wanted to work in the farming sector and gained a degree in agricultural engineering. But with a lack of jobs in the sector he joined a civil engineering company involved with major infrastructure projects. Work dried up during the credit crunch and Akos made the difficult decision to leave his family and friends and move to England in 2010. Since then he has worked in the restoration of historic vehicles as a parts adviser, then service manager. In his new role at Claydon he will be based at Wickhambrook in Suffolk but will travel to dealers all over the world.

Movers and shakers

Do you know of someone who is on the move in the agricultural industry? Whether they are starting a completely new role, a promotion within a business or perhaps a retirement after many years of dedicated service, let us know and we will do our best to include it on our popular ‘About People’ pages. Send in no more than 150 words and a (head and shoulders) picture of the person in question to (email) rachel.hicks@farmersguide.co.uk.

69410

We are looking for several Area Sales Executives for territories between the M4 corridor and the Scottish borders, to help us increase our sales revenues and maintain customer relationships within an assigned geographical area. In this role, we seek individuals with outstanding sale and organisational skills to join the sales team of our award winning, market leading company. We expect you to understand customer needs and exceed them through excellent communication and analysis. Ultimately, you will be goal driven and ensure our clients are happy whilst growing sales.

Responsibilities : Devise effective territory sales and marketing strategies • Analyse data to find the most efficient sales methods • Meet with customers to understand their needs, provide solutions and address any concerns • Discovery of new Dealerships through market knowledge and area research • Present products and services to prospective customers/clients • Participate in industry or promotional events to cultivate customer relationships • Excellent remuneration package with sales commission, car, mobile & laptop • Please forward your CV to rob.jones@slurrykat.com with a cover note and current salary

Three new faces at agrochemical company Oro Agri has appointed three new members of staff to its technical development team in Italy, France and Turkey. Onorio Gamberini, who will be based in Italy, was technical manager of fungicides at Rhone Poulenc Agrochimie for 19 years. His career then spanned the joint ventures of Aventis and the Bayer acquisition, before moving to Cheminova Italia as research and development manager, then Nufarm Italia, where he was customer marketing manager. Carol Pullen, Oro Agri’s general manager for Europe, said Onorio’s knowledge of the Italian market, as well as his sales, technical, operational and strategic marketing experience, means he is ideally placed to offer technical and development support. Joining the team in France is Elodie Rebolle, who will provide business development

and technical support. She began her career at Basf Agricultural Solutions as customer technical support for its digital crop monitoring service, then spent three years as a sales rep in south east France, before joining Nufarm in 2017. Finally, Murat Yavuzer has joined the business in Turkey, joining county manager Orcun Urun as they embark on establishing a new Oro Agri entity in Turkey, which is planned for early 2020. Murat graduated as an agriculture engineer before joining Koppert Biological Systems in 2012 as a direct sales specialist. In 2018 he began working for Nufarm as its business development and technical support. Oro Agri is part of the Omnia Group under the agriculture division, which develops, manufactures and distributes agriculture ‘soft chemistry’ products in the organic, sustainable or environmentally friendly categories.

Find Staff – Find a Job! www.4xtrahands.com

69150

New recruit supports Claydon’s expansion

Tractor Drivers, Sprayer Operators, Fencers, Livestock Workers and all Rural Staff

01284 747292 admin@4xtrahands.com January 2020 www.farmads.co.uk 265

265-267 Recruitment pages.indd 265

12/12/2019 10:43

Recruitment and About People Email: classified@farmersguide.co.uk

New head of potato exports for AHDB The former head of Seafood Scotland, Patrick Hughes, has joined AHDB as head of potato export development. Patrick will work with UK exporters to maintain the current market position and explore further opportunities overseas. In his previous role, he was responsible for marketing, promoting and developing opportunities for Scottish seafood, to maximise the return on investment for the industry. He brings a wealth of experience in driving export demand and international trade, as well as being an integral part of the Scotland Food

& Drink Export Partnership. Commenting on his new role, Patrick said: “I am delighted to join AHDB at such an exciting time when international trade and developing new markets for the potato sector is more important than ever before.” AHDB international market development director, Dr Phil Hadley said: “It is Patrick’s combination of food and drink expertise, coupled with his first-hand export development knowledge that makes him ideally suited to the role. I am delighted to welcome him to the team and look forward to seeing him take industry export ambitions even further at this crucial time for the sector.”

J Riley welcomes Nathan Carter to the team Norwich-based company, J Riley Beet Harvesters (UK), has appointed Nathan Carter to take over sales of the Vervaet beet harvester and Hydro Trike product lines across the country. Nathan is joining the company from a local agricultural machinery dealership. Commenting on his new role, he said: “I wanted to join a company which offers really good service and backup to its customers, and a first-class product. Rileys have a great reputation, and we had a preliminary meeting a

couple of years ago which left me with a very positive feeling about the company. I really like the fact that both Rileys and Vervaet are family-run, with a personal touch and an extremely high level of attention to detail. I’m looking forward to being able to meet all of our customers, old and new.” Managing director Jeremy Riley echoed Nathan’s comments: “We’re really pleased to have Nathan on board. When we first met a few years ago we felt that he was someone who we wanted as part of our team, and we think he’ll be a real asset to our company both now and in the future.”

Jon Duffy to step down as AF Group CEO The UK’s leading procurement co-operative for farmers, the AF Group, has announced that its CEO Jon Duffy will step down in early summer 2020. Jon joined the company in 2017 and has been instrumental in focusing the organisation on its members, staff and suppliers, creating a business that has seen significant growth in returns to its members. He said: “Since joining nearly three years ago, I have worked closely with the board and senior management team and together we have created a business that is fit for today’s farming environment and equipped to help farmers adapt to the undoubted challenges that lie ahead.”

Commenting on his decision to step down, he added: “It has been a difficult decision, but I feel it is the right time, both for the business and for me personally. I have been enormously impressed with all of my colleagues at AF and proud of what we have achieved.” AF chairman Nigel Savory said: “I cannot thank Jon enough for the changes that he has helped us instigate. We now have a very dynamic business to build upon and I am looking forward to continuing to work with Jon and the senior management team he has assembled. We will now identify a new CEO to continue to drive our growth agenda and to return ever greater value to our members and help them with the challenges and opportunities facing UK agriculture.”

New appointment to boost agri-tech business Lee Fletcher has been appointed as business development manager for Siemens Digital Industries (Siemens DI), to spearhead growth plans and boost its value-add to the agri-tech sector. Lee will focus on developing the company’s presence in the UK agritech supply chain, whilst exploring how industrial digital technologies can be deployed to aid productivity and outcomes in the agri-tech sector. As a springboard into his new role, he brings around 20 years of experience working with Original Equipment Manufacturers (OEMs) and as a food and drink sector specialist. Siemens DI managing director Brian Holliday said: “The agri-tech sector will grow over the next few

years and warrants this investment. As a technology disruptor, Siemens Digital Industries has introduced cutting-edge simulation, automation and cloud analytics across manufacturing and agri-tech looks equally set to benefit from such innovation. Lee has the right credentials and expertise to engage with key agri-tech companies and help them drive productivity through our well-proven Digital Enterprise technology.” Lee commented: “Siemens has some leading technologies which will assist our countrywide agri-tech customers on the journey of automating and digitalising. With my breadth of experience and industry expertise, I look forward to significantly raising the profile of Siemens DI in the agri-tech industry.”

New parts sales manager to support Argo dealers Machinery dealers supplying Landini and McCormick tractors in Ireland, Scotland and the north of England are being supported by parts sales manager Adam Waugh, a new recruit to the Argo Tractors team. “Having worked on parts and sales in the family machinery dealership, I’ve seen from the other side of the counter the importance of good parts management to ensure customers can get the items they need when they need them,” says Adam. “I’m already enjoying my new role, visiting and introducing myself to dealers and setting out the new

digital technologies that Argo Tractors has developed for parts management.” Adam is working alongside Tony Burgess, the national parts sales manager based at Harworth near Doncaster, South Yorkshire, who looks after Argo Tractors dealers in Wales and the rest of England. As he tours the machinery dealers on his patch, Adam says he is pleased to be back on the agricultural scene after a few years working with construction equipment. “Agriculture is a great industry and although I now live in Glasgow, my family is still in Stranraer, south-west Scotland, which is ideal for taking the ferry to visit our dealers in Ireland.”

Openfield promotion to fertiliser manager Lucy Hassall has taken on the new role of fertiliser manager at Openfield, having worked for the company since 2006. Lucy joined the company as a grain handling administrator, before moving into a split role covering sales administration for grain and fertilisers. She soon realised she had a keen interest in fertilisers, as well as a passion for developing internal and external relationships at

Openfield. She passed her FACTS qualification in 2015 and became a fertiliser trader. Going forward into her new role, she will be involved in developing strategies to grow the business, leading the team to deliver these strategies, building and maintaining relationships with Openfield’s partners and working closely with the team of farm business managers. Commenting on her new position, Lucy said: “It feels like a big achievement. I’m excited about the future and keen to help grow and develop the business.”

266 www.farmads.co.uk January 2020

265-267 Recruitment pages.indd 266

12/12/2019 10:18

About People Jamie Dewhurst joins AHDB horticulture board board. The new five-year strategy is being put in place, so it’s a fantastic opportunity for me to help ensure we’re investing our resources in a way that will have the most benefit for growers and the industry in the long-term.” Hayley Campbell-Gibbons, AHDB board member and horticulture sector board chair, added: “I’m delighted that Jamie will be joining us at a time when the industry faces significant change, from the declining availability of plant protection products, rises in robotics and automation, through to evolving consumer behaviour. “Jamie’s experience, extensive knowledge of the industry and his strategic vision is vital to help us ensure we are delivering the best value for the levy and to keep the industry resilient and productive throughout this period of change.”

Northumberland farmer made CLA president Mark Bridgeman has been elected as the 54th president of the Country Land and Business Association (CLA), which represents 30,000 rural businesses. Mark farms on the Northumberland coast. He said: “I am delighted to be appointed to this role at a time of great change within the agricultural and rural sectors. There are many challenges ahead, and I relish the prospect of representing members within the region and nationally. “Lobbying on behalf of our members, who are responsible for managing more than 10 million acres of land, I will continue to

seek greater clarity from a future government in relation to policies that can support farmers and landowners in a practical manner. Of course, this will be in tandem with our ongoing lobbying efforts on other key rural issues.” Mark launched the CLA’s Rural Powerhouse campaign in November, which calls for a fully connected countryside, a planning system designed for rural communities, investment in skills and innovation, a simpler tax regime and a profitable and sustainable farming sector. Mark Tufnell was elected deputy president and new vice-president Victoria Vyvyan became the CLA’s first elected female officer.

Chairman of the National Pig Association, Richard Lister, has been presented with the prestigious David Black Award for his outstanding contributions to the success of the pig industry. Presenting his award at the National Pig Awards in November, AHDB’s pork sector board chairman, Mike Sheldon, said: “Richard has been a force for good, leading the way and demonstrating, on his own unit, the benefits of investment in health and biosecurity. “He leads the National Pig Association with a strong voice and remains determined to ensure

the sector is represented fairly and accurately to the wider industry, government and consumers. “He has frequently represented the industry in the media and has never let the sector down, shining a light on the high standards maintained to produce pork from Britain. He demonstrated pioneering leadership, helping to establish the first ever industry targets to encourage the responsible reduction of antibiotic usage as part of the RUMA Targets Task Force.” Mike noted the pig industry’s significant achievements in reducing antibiotic usage by more than 60 per cent in the past few years.

A new chapter for Johnstruct Mark Allen has taken over the running of Johnstruct Ltd (JS), after his father Richard sadly passed away in January 2019. Civil engineer Mark, 47, has large-scale rail infrastructure engineering experience, having joined the Railtrack Graduate engineering training scheme in 1996. He says he is very much enjoying working in the farming industry and has found the agricultural and related supplier community to be incredibly supportive during a difficult year. Mark has a very good appreciation of agricultural building (and planning) requirements, as well as seasonal farming issues, and prides himself on being a quick learner

and a practical engineer. With the benefit of his large-scale infrastructure and engineering background, and a loyal longestablished supplier base, JS are well placed to offer customers a skilled, tailored and competitive building service, he says. JS is proud to be an independent provider of all types of agricultural and commercial buildings. The company offers hassle-free buildings and refurbishment, covering planning applications (and conditions), most aspects of building, through to installation of a bespoke grain drying floor or mezzanine if needed. Contact Mark if you are considering taking advantage of the 1000m2 agricultural permitted planning development rights, or if you’re considering a new building or refurbishment project.

New appointments at Claas Claas Eastern has made a series of new appointments at its Ulceby and Brigg depots, supporting sales growth in east and south Lincolnshire, as well as South Yorkshire. Jon Baxter has joined the company’s Ulceby Cross depot to help with sales growth in East Lincolnshire. He brings with him 29 years of experience in agricultural machinery sales in the area, having worked with John Deere machinery and specialising in the cultivation area of

machinery retail. He has worked with Vaderstad cultivation and seeding machinery for many years, meaning he is well-placed to help farmers with enquiries on Horsch and Lemken. The Brigg team has also welcomed new field sales manager Toby Hewitt, who will cover the Brigg west area in parts of South Yorkshire, across to the M1, south of the M62. Toby gained a passion and expertise for machinery while studying for a degree in agricultural

crops and machinery at Harper Adams University. This was followed by several years specialising in machinery sales in South Yorkshire, covering retail sales with a New Holland retailer and product support roll for Vaderstad. Jake Blanshard has joined the Ulceby depot as a field sales manager looking after the south Lincolnshire area. His new role will see him take responsibility for any Claas and Lemken KRM sales in the area,

providing demonstrations, and calling and chatting to farmers in the area about their machinery needs. After graduating from the Royal Agricultural University with a degree in rural land management, Jake worked for slurry tank and muck spreader manufacturer, Pichon Industries, before joining Agrifac as sales manager last year, working with the company’s Holmer Exxact and Zunhammer brands. Jake said he is pleased to be back in his local area of south Lincolnshire, where he has a thorough knowledge of the client base.

Recruitment and About People — www.farmersguide.co.uk/situations-vacant

AHDB has appointed Jamie Dewhurst as a member of its Horticulture Sector Board, following a competitive recruitment process. He began his threeyear tenure in November. Jamie is the owner of Warwickshire-based J&A Growers, which produces 12 million plants a year and supplies the wholesale nursery sector in the UK and Europe. He is also president of the European Forest Nursery Association and a member of CONFOR (the Confederation of Forest Industries) Nursery Producers Group. He was also a member of AHDB’s Hardy Nursery Stock Panel for several years. Jamie commented: “This is the perfect time for me to join the

Pig industry stalwart scoops coveted award

January 2020 www.farmads.co.uk 267

265-267 Recruitment pages.indd 267

12/12/2019 10:20

F fo A RE rf D E ar S m er s

Farmers Guide Something to sell or something you need?

Sell and source your used machinery and other requirements here. Include a picture free of charge with your ad* (usual cost ÂŁ14.40). The next issue of Farmers Guide will appear online at www.farmersguide.co.uk To guarantee your FarmAd appears in the February 2020 issue, we need to receive your advert by the 23rd January 2020.

Ads are best submitted online at www.farmads.co.uk Or use this form and fax to 01473 691886 or post to: Farmers Guide, Parkside, London Road, Ipswich, IP2 0SS

FREE picture ads for farmers

This form must be signed

I certify that in placing this advertisement I am acting in a private capacity and not offering items purchased for the purpose of re-sale and not in contravention of the 1977 Business Disclosure Order.

Signed:........................................................................................................................................................................................ Address:................................................................................................................................................................................................................................................................................................................................ ...........................................................................................................................................................................................................................................................................................................................................................................................

County:............................................................................................................................................................................

Postcode:............................................................................................................Name (in caps):............................................................................................................................................................................................................................................................................................................................................................. Tel No/s:............................................................................................................................................................................................................................................................................... Email:....................................................................................................................................................................................................................................................

Please print clearly and take care with phone numbers Any comments or suggestions?

Please tell us what you like best or what you would change in Farmers Guide.

Please circle how many people read your copy of Farmers Guide:

Other (

)

* For a limited period, all picture ads submitted will appear in the magazine free of charge (at our discretion), subject to space availability. FarmAds suspected of being non genuine or from individuals or companies we believe to be trading commercially will not be published.

FarmAd Coupon 2020.indd 1

13/12/2019 14:03

ED1378 DOE SHOW DPS v3.qxp_Layout 1 09/12/2019 15:30 Page 1

EENTS,Y E R FRESHM& ENTR

F RE KING R PA

DON’T MISS BY FAR THE LARGEST AGRICULTURAL, CONSTRUCTION AND GROUNDCARE DEALER SHOW IN THE UK

WORLD CLASS MACHINERY CUTTING EDGE TECHNOLOGY WILL BE ON DISPLAY IN OUR BRAND NEW TECH AND INNOVATION HUB PLUS AWARD WINNING MACHINERY FROM NEW HOLLAND AND CASE IH.

WORKING DEMONSTRATIONS It would not be a Doe Show if you could not see equipment working and on land that’s immediately adjacent to the showground. Expect to see the latest from New Holland and Case IH pulling a variety of implements plus some vintage crowd pleasers.

Est.1986

@agrihire Made in Britain used worldwide

AGRICULTURAL EQUIPMENT HIRE

ENGINEERING & SALES

YEA R S 1960 - 2020

ANNIVERSARY AGRICULTURE

4th, 5th, 6th FEB 2020 | ULTING, MALDON CM9 6QH Founded in 1898, Ernest Doe has been serving customers for the last 122 years. However, 2020 marks the Doe Show Diamond Anniversary, 60 years since the very first DOE SHOW, and we invite you to join us and be part of our BEST SHOW EVER! Since it was launched in 1960, the Doe Show has gone from strength to strength, attracting thousands of visitors, year after year. The show has grown significantly both in visitor numbers and content and is now a firm fixture in the calendar, in the first full week of February every year. As usual the show will have large display areas devoted to New Holland and Case IH products,

as well as those of major implement manufacturers such as Lemken, Dal-Bo, Kuhn, Shelbourne Reynolds, Maschio, KRM, SIP, Spearhead, Richard Western, Marshall Trailers plus some new exciting suppliers to be launched at the show. In the construction demo area, there will be displays from Hyundai, Thwaites, Bomag, Atlas Copco and Epiroc.

First UK launch of the New Holland T8 Genesis New Generation. Impressive range of New Holland machinery on display.

In the Case IH marquee, you can check out an equally impressive line-up of machinery including the brand new Case IH Magnum.

BARGAINS EVERYWHERE

GROUNDCARE Learn about the latest advances and applications in Lithium-Ion technology. See the latest golf car and utility vehicles fitted with new EFi engines. Great deals on exdemo and ex-hire stock. Arborist equipment and chainsaw and chipper demonstrations from Stihl, Husqvarna and Eliet. Live off road 4x4 Utility Vehicle demo track.

Y body spinner deck 18 to 40 tonnes.

Y body vertical beater 8 to 40 tonnes.

Classic vertical beater 8 to 40 tonnes.

Magnum spinner deck 20 to 50 tonnes.

Flat trailers.

Bulk trailers.

All of our spreaders are manufactured by ourselves in the UK and combine heavy duty construction with top quality components. Standard speciﬁcations include 20mm chain, 70mm shafts and bearings, commercial axles, wide angle PTOs.

CONSTRUCTION

An impressive display of groundcare equipment from top brands including Ransomes Jacobsen, Trilo, Weidenmann, E-Z-GO, Iseki, GKB and Wessex International will also feature in the Groundcare Pavilion.

We also manufacture... ...the only British built plough on the market, uses a combination of well proven genuine Dowdeswell parts and modern updates. From 5 to 10 furrows to suit horsepowers up to 600hp, in furrow and on land options with a choice of bodies including DD, DDS, UCN, SCN and Slatted.

See us at

FOR OUR 60TH DOE SHOW, THERE WILL BE SOME

OVER 150 TRADE STANDS... BRAND NEW FEATURE FOR 2020 • Tech and Innovations Hub showcasing latest technology • First UK launch of the New Holland T8 Genesis New Generation • Full range of Case IH agricultural equipment • Vintage tractors • New and used stock for sale • Professional Groundcare machinery and attachments

amazing Doe Diamond Deals, says Sales Director Graham Parker. 'We want to make this show better than ever before and we have pulled out all the stops. We will have some brand new warranted machines at clearance prices, representing excellent value for money, plus a few new features that our visitors will not have seen before.' Remember to look in our country store where there are always special

• Construction plant and machinery • Chainsaw demos • Working demonstrations

offers and bargains to be found. Whether you are looking for a

• Clearance bargains • Parts & showroom offers • NRoSO/BASIS/BIGGA CPD points

ladder, a new pair of work boots or even a lawn mower, you’ll find

• Ex-hire stock sale • Country clothing store and much, much more...

something to suit every taste and budget. In our clothing and

#60doeshows

www.ernestdoe.com | www.ernestdoepower.com

Covers.indd 5-8

First UK showing of the Hyundai9A series of excavators and loading shovels. First UK launch of the Thwaites 2020 model dumpers. New 2020 range of Atlas Copco Stage 5 compatible portable air compressors. New range of Bomag rollers and compaction equipment. Extensive static display of Epiroc hydraulic breakers.

footwear department you will find quality outdoor clothing and workwear from leading brands including Schöffel, Harkila, Seeland, Barbour, Joules, Dickies, Le Chameau and Aigle.

#doeshow2020

THE 60th ANNUAL DOE SHOW | • FREE ENTRY, REFRESHMENTS & PARKING | • NRoSO / BASIS / BIGGA CPD POINTS

Hall 6 Stand 6.910

We also....

... supply a wide range of new PTO shafts and spares nationwide and also carry out servicing and repairs on most types of shaft. A huge range of parts are available including U/Js, tubing and guards. We also supply gear boxes and hydraulic motors for a wide range of machines including mowers. spreaders and toppers. Our parts department offer’s a comprehensive range of oils, ﬁlters, wearing parts, batteries, bearings, belts, and tools. We are also the UK’s largest Dowdeswell parts supplier. 67780

Parts & Hydraulics Jeremy Waspe 01473 744184

Sales Ben Clowes 07764 968206

www.agrihire.co.uk

Hire James Seeley 07860 849685

Transmissions Mick Hewitt 01473 240377

agrihire@agrihire.co.uk

11/12/2019 22:31

ED1379 DOE SHOW narrow AD v1.qxp_Layout 1 09/12/2019 15:31 Page 1

Farmers Guide

January 2020

EENTS,Y E R M FRESH & ENTR

DONâ&#x20AC;&#x2122;T MISS BY FAR THE LARGEST AGRICULTURAL, CONSTRUCTION AND GROUNDCARE DEALER SHOW IN THE UK

Farmers Guide

F RE KING R PA

www.farmersguide.co.uk

Issue 485

FREE for farmers

Wash Lane, Mendlesham, Stowmarket, Suffolk IP14 5TD Tel: 01449 766157 Fax: 01449 767894 Issue 485

GAS, ELECTRICAL & DIESEL HEATERS INDIRECT FIXED, MOBILE & SUSPENDED HEATERS

â&#x20AC;¢ from 34,000â&#x20AC;&#x201C;358,000Btu

INDIRECT FIXED & SUSPENDED HEATERS

LAMMA 2020 | 7TH â&#x20AC;&#x201C; 8TH JANUARY 2020 STAND 9.210, HALL 9 AT THE NEC, BIRMINGHAM January 2020

â&#x20AC;¢ ideal for workshops â&#x20AC;¢ fume-free â&#x20AC;¢ low noise â&#x20AC;¢ inside & outside use

PORTABLE OIL HEATERS

STAR BUY

â&#x20AC;¢ clean hot air â&#x20AC;¢ trolley included

ANNIVERSARY

To find out how you can benefit from Valtra Smart Farming technologies visit us at

â&#x20AC;¢ from 250,000â&#x20AC;&#x201C;750,000Btu

INFRA-RED HEATERS

1960 - 2020

EMBRACE THE POWER OF SMART FARMING TODAY

INDIRECT TRAILER MOUNTED HEATERS

â&#x20AC;¢ from 80,000â&#x20AC;&#x201C;760,000Btu

WHAT DOES A SMART FARMER SEE?

YE AR S

Pre-register online at www.valtra.co.uk/LAMMA2020 to receive your EXCLUSIVE SMART FARMER GIFT on arrival at our stand.

INDIRECT FIXED WORKSHOP HEATERS

4th, 5th, 6th FEB 2020 | ULTING, MALDON CM9 6QH

â&#x20AC;¢ from 120,000â&#x20AC;&#x201C; 2,000,000Btu

66676

For details or a demonstration ring Tim Bradford now on

ALL MASTER PARTS AVAILABLE GREAT DEALS AVAILABLE ON SALES AND SERVICING

email sales@tworkshop.co.uk We also supply HEAVY DUTY AIR COMPRESSORS and HIGH PRESSURE WASHERS

See our website for details Covers.indd 1-4

01449 766157 fax 01449 767894

www.tworkshop.co.uk

www.farmersguide.co.uk

FREE ADVICE ON THE BEST HEATER TO SUIT YOUR NEEDS

> www.valtra.co.uk

#60doeshows

Valtra is a worldwide brand of AGCO.

11/12/2019 22:29

Farmers Guide January 2020

Articles inside

Essex Farm Machinery Sale

Agritechnica 2019