×
close
1971 Chevrolet Camaro Catalog and Classic Car Guide, Ratings and Features

Image of 1971 Chevrolet Camaro, sourced from www.coyoteclassics.com , Image Link.

Performance Metrics

Performance: +70
Handling: +65
Ride Comfort: +60

Fundamental Metrics

Safety: +50
Maintenance and Upkeep: +75
Restoration Difficulty: +80

Emotional Appeal

Looks: +85
Collectability: +70
Historical Significance: +60

MMP Rating

7.4 /10
Engine Specifications
Engine Options: 250 I6, 307 V8, 350 V8, 396 V8
Displacement Range: 250-396 cu in
Horsepower Range: 110-375 hp
Torque: 190-415 lb-ft
Compression Ratio: 8.5:1 - 11.0:1
Ignition System: Conventional, breaker point
Cooling System: Liquid cooled
Performance Specifications
0-60 Time: 6.0 - 8.0 seconds
1/4 Mile Time: 14.5 - 16.0 seconds
Top Speed: 120 - 140 mph
Transmission and Drive
Drive Type: Rear wheel drive
Transmission Type: 3-speed manual, 4-speed manual, 2-speed automatic, 3-speed automatic
Fuel and Efficiency
Fuel System Type: Carburetor
MPG: 10-15 mpg
Dimensions and Brakes
Brakes: Front disc, rear drum
Wheelbase: 108.0 in
Weight: 3,300 - 3,800 lbs

Note: Specifications for classic cars are given to the best of our ability, considering the limited and variant data available.

1971 Chevrolet Camaro: A Fusion of Muscle and Style

The 1971 Chevrolet Camaro doesn't just turn heads—it snaps necks with its bold design and raw power. Born from the fervent American muscle car era, this model marked an evolution for Chevrolet, a brand synonymous with performance and innovation. The Camaro's introduction in 1966 was a direct response to the Ford Mustang, and by 1971, it had firmly established itself as a potent rival. One unique fact that car enthusiasts revel in is that the '71 Camaro featured a more resilient rear suspension design, which significantly improved its handling—a nod to Chevy's commitment to blending speed with drivability.

Design and Innovation

The exterior of the 1971 Camaro is a testament to the era's love affair with sleek lines and an aggressive stance. Its wide, low body, accented by a distinctive split-bumper front end in some models, gives it a predatory look ready to pounce on the open road. Inside, occupants were greeted with a cockpit-style cabin, complete with high-back bucket seats and a dashboard that wrapped around the driver. Materials ranged from standard vinyl to plush cloth, depending on trim levels. Technologically, the '71 Camaro was ahead of its time with options like variable-ratio steering and an available Turbo-Hydramatic transmission. Color options were aplenty, but hues like Mulsanne Blue and Classic Copper often caught buyers' eyes. The most iconic body style remains the sport coupe, particularly when equipped with the Z/28 performance package.

Historical Significance

The 1971 Camaro wasn't just another muscle car; it was a statement of resilience during a time when stricter emission regulations began to strangle horsepower figures. It set itself apart with its refined handling characteristics and became an icon for maintaining performance under pressure. This model year would go on to influence future generations of sports cars in both aesthetics and engineering.

Performance and Handling

Underneath the hood lay the heart of this beast—a variety of powerplants ranging from a 250-cubic inch inline-six to a massive 396-cubic inch V8. Performance numbers varied, but a well-equipped Z/28 could sprint from 0-60 mph in under 7 seconds—a respectable figure for its time. The 1971 Camaro handled bumps with grace thanks to its improved suspension setup, while windy roads revealed its agility. Drivers often reminisce about the symphony played by the V8 engine—a rumble at idle that crescendos into a roar under acceleration—complementing an exhilarating driving experience.

Ownership Experience

The '71 Camaro found its way into various roles—from daily drivers to weekend drag racers. Its relatively simple mechanical design made maintenance manageable for the average owner. However, as with many classic cars, finding original parts can be challenging today.

Fun Facts

The '71 Camaro has graced both small and big screens alike, often cast as the quintessential American muscle car. A rare edition sought after by collectors is the Z/28 equipped with the RS (Rally Sport) package—known for its distinctive appearance features including split bumpers and hideaway headlights. Despite criticisms over fuel efficiency—a common issue among muscle cars—the Camaro remained popular for its style and performance.

Collector's Information

Today's collector market sees the 1971 Chevrolet Camaro as a prized asset, especially models in pristine condition or those bearing SS or Z/28 badges. While production numbers were in the tens of thousands, exact figures are elusive due to combined production statistics for multiple years. Values range significantly based on condition, originality, and specification—anywhere from $20,000 for a base model in good condition to well over $50,000 for rare or fully restored examples.

Conclusion

The 1971 Chevrolet Camaro stands as more than just a relic of automotive history—it's a symbol of American ingenuity during an era of change. With its blend of style, performance, and muscle car bravado, it continues to captivate enthusiasts around the globe. Whether roaring down a quarter-mile strip or gleaming at a local car show, this classic Chevy remains an enduring piece of Americana on wheels.

1971 Chevrolet Camaro Catalog of Parts

1971 Chevrolet Camaro Center Grill Divider Insert, 70-73 Chevy Camaro, Includes Mounting Hardware-BG 99-C 1971 Chevrolet Camaro Center Grill Divider Insert, 70-73 Chevy Camaro, Includes Mounting Hardware-BG 99-CCenter Grill Divider Insert, 70-73 Chevy Camaro, Includes Mounting Hardware, Each. Replaces OEM # 3974551. Mounts onto the center grille divider and finishes out the center grille section. Comes with mounting hardware.

1971 Chevrolet Camaro Front coil-spring insulator-BN 110 1971 Chevrolet Camaro Front coil-spring insulator-BN 110Front coil-spring insulator. Fits '41-'60 Oldsmobile and '50-'83 GM passenger models. 5-3/8 in. OD x 3-3/4 in. ID x 3/4 in. high with 13/16 in. wide bottom flange 1/4" thick, 12 flutes. Each.

1971 Chevrolet Camaro Door Side Seal-C/LP 40-K 1971 Chevrolet Camaro Door Side Seal-C/LP 40-KDoor Side Seal. Made of smooth skin sponge extrusion, with clips installed. (For seal without clips, see LP 40-K) Sold by the foot.

1971 Chevrolet Camaro Hood-to-cowl seal. ’70-’81 Camaro, ’77-’81 Firebird-CS 15-C 1971 Chevrolet Camaro Hood-to-cowl seal. ’70-’81 Camaro, ’77-’81 Firebird-CS 15-CHood-to-cowl seal. '70-'81 Camaro, '77-'81 Firebird. Excludes models with fiberglass hood. Replaces OEM#14030759. Each.

1971 Chevrolet Camaro Rear hood-to-corner cowl seals-CS 15-D 1971 Chevrolet Camaro Rear hood-to-corner cowl seals-CS 15-DRear hood-to-corner cowl seals. '70-'81 Camaro, '77-'81 Firebird. Excludes models with fiberglass hood. Pair.

1971 Chevrolet Camaro Door, Hood and Trunk Bumper Cap for adjustment bolt-HA 5 1971 Chevrolet Camaro Door, Hood and Trunk Bumper Cap for adjustment bolt-HA 5Door, Hood and Trunk Bumper Cap for adjustment bolt. 7/8" diameter X 7/16" thick. Each


1971 Chevrolet Camaro Molded Door Seals with Clips and Molded Ends-LM 22-B 1971 Chevrolet Camaro Molded Door Seals with Clips and Molded Ends-LM 22-BMolded Door Seals with Clips and Molded Ends. Replaces OEM #9868430/1. Pair R&L

1971 Chevrolet Camaro Tail-light to body gaskets. ’70-’73 Camaro. Dense rubber-MB 67-B 1971 Chevrolet Camaro Tail-light to body gaskets. ’70-’73 Camaro. Dense rubber-MB 67-BTail-light to body gaskets. '70-'73 Camaro. Dense rubber. Replaces OEM#'s 5963583/4. Pair.

1971 Chevrolet Camaro Backup light to body gaskets. ’70-’73 Camaro. Dense rubber-MB 67-C 1971 Chevrolet Camaro Backup light to body gaskets. ’70-’73 Camaro. Dense rubber-MB 67-CBackup light to body gaskets. '70-'73 Camaro. Dense rubber. Replaces OEM# 5963060. 5 in. ID, 6-1/4 in. OD. Pair.

1971 Chevrolet Camaro Radiator support cushion-RA 4 1971 Chevrolet Camaro Radiator support cushion-RA 4Radiator support cushion. Fits '68-'91 Chevrolet cars and trucks with Big Block engines. (See associated vehicles.) Reproduction rubber insulator cushion with 3.08 in. recess fits upper and lower mounts. Replaces OEM# 6264100. Each.

1971 Chevrolet Camaro Basic Kit, for 2-Door Hardtop-RKB 2001-105 1971 Chevrolet Camaro Basic Kit, for 2-Door Hardtop-RKB 2001-105Basic Kit, for 2-Door Hardtop. Door (LM 22-B) Roof Rail (RR 7002) Trunk (TK 46-10), Seals.

1971 Chevrolet Camaro Brake Master Cylinder Cover Seal.  Replaces OEM #5470861-RP 2-E 1971 Chevrolet Camaro Brake Master Cylinder Cover Seal. Replaces OEM #5470861-RP 2-EBrake Master Cylinder Cover Seal. Replaces OEM #5470861. 5" X 2-1/2". Each

1971 Chevrolet Camaro Oil Filler Hole Cap.  Made of rubber-RP 8 1971 Chevrolet Camaro Oil Filler Hole Cap. Made of rubber-RP 8Oil Filler Hole Cap. Made of rubber. Fits a 1-3/16" to 1-1/4" hole. Each

1971 Chevrolet Camaro Roof Rail Seals with Molded Ends.  For 2-door hardtop-RR 7002 1971 Chevrolet Camaro Roof Rail Seals with Molded Ends. For 2-door hardtop-RR 7002Roof Rail Seals with Molded Ends. For 2-door hardtop. Pair R&L

1971 Chevrolet Camaro Door Bumper.  Made with twin retainers-SB 32 1971 Chevrolet Camaro Door Bumper. Made with twin retainers-SB 32Door Bumper. Made with twin retainers. 3/4" high X 1/2" wide X 15/16" long. Each

1971 Chevrolet Camaro Trunk Bumper.  Fits lower corner on decklid.  15/16 O.D-SB 34 1971 Chevrolet Camaro Trunk Bumper. Fits lower corner on decklid. 15/16" O.D-SB 34Trunk Bumper. Fits lower corner on decklid. 15/16" O.D., 11/16" high. Each

1971 Chevrolet Camaro Interior Bumper.  For glove box, ash tray or fuel door-SB 36 1971 Chevrolet Camaro Interior Bumper. For glove box, ash tray or fuel door-SB 36Interior Bumper. For glove box, ash tray or fuel door. Fits 3/16" hole. Each

1971 Chevrolet Camaro Seat Bumper.  Made with steel core like original-SB 62-A 1971 Chevrolet Camaro Seat Bumper. Made with steel core like original-SB 62-ASeat Bumper. Made with steel core like original. 1-1/2" long, 7/16" thick. Two used per car. Each

1971 Chevrolet Camaro Front door window stop bumper. ’70-’81 GM passenger cars-SB 70-A 1971 Chevrolet Camaro Front door window stop bumper. ’70-’81 GM passenger cars-SB 70-AFront door window stop bumper. '70-'81 GM passenger cars. Dense rubber. Replaces OEM# 9810036. Each.


1971 Chevrolet Camaro Snap-In-Bumper Kit-SBK 207 1971 Chevrolet Camaro Snap-In-Bumper Kit-SBK 207Snap-In-Bumper Kit. 14-Piece Set Includes: (2)HA 5, (4)HF 64, (4)SB 32, (2)SB 34, (2)SB 36

1971 Chevrolet Camaro Arm Splash Shield Kit-SI 2005-102 1971 Chevrolet Camaro Arm Splash Shield Kit-SI 2005-102Arm Splash Shield Kit. Used as dust and mud shield to keep engine compartments clean. Made from stiff rubber that is identical to original in composition, texture and color. Set

1971 Chevrolet Camaro Cowl to Fender Dust Shield Seal, 70-81 GM 'F' Body, Set of 2-SI 2005-102-A 1971 Chevrolet Camaro Cowl to Fender Dust Shield Seal, 70-81 GM 'F' Body, Set of 2-SI 2005-102-ACowl to Fender Dust Shield Seal, 70-81 GM 'F' Body, Set of 2. Includes installation hardware.

1971 Chevrolet Camaro Dash and Firewall Grommet.  Single-hole type is for one wire-SM 101 1971 Chevrolet Camaro Dash and Firewall Grommet. Single-hole type is for one wire-SM 101Dash and Firewall Grommet. Single-hole type is for one wire. Each

1971 Chevrolet Camaro Timing Hole Plug.  For 6-cylinder engines.  1-3/4 X 1-1/4-SM 59 1971 Chevrolet Camaro Timing Hole Plug. For 6-cylinder engines. 1-3/4" X 1-1/4"-SM 59Timing Hole Plug. For 6-cylinder engines. 1-3/4" X 1-1/4". Each

1971 Chevrolet Camaro Firewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L-SM 80-A 1971 Chevrolet Camaro Firewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L-SM 80-AFirewall insulation fastener. 1 in. dia. W head. 1-1/2 in. L. Replaces OEM#'s (GM) 7642589 and (AMC) 4001934. Black. Each.


1971 Chevrolet Camaro Trunk Seal, Fits: '67-'81 GM F Body-TK 46-O 1971 Chevrolet Camaro Trunk Seal, Fits: '67-'81 GM F Body-TK 46-OThis is a trunk seal for 1967-1981 Chevrolet Camaro and Pontiac Firebird vehicles. Our product is made with high quality ozone resistant EPDM rubber for a great fit and long life.

1971 Chevrolet Camaro Trunk Mat-TM 2011 1971 Chevrolet Camaro Trunk Mat-TM 2011Trunk Mat. High quality reproduction, made specific for vehicle. Green houndstooth print on rubber. Each

1971 Chevrolet Camaro Unbeaded Door and Trunk Lock Gasket.  1-3/16 O.D., 7/8 I.D-UM 1600-100 1971 Chevrolet Camaro Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D-UM 1600-100Unbeaded Door and Trunk Lock Gasket. 1-3/16" O.D., 7/8" I.D. Each

1971 Chevrolet Camaro Window Sweeper Kit-WC 2008-20 1971 Chevrolet Camaro Window Sweeper Kit-WC 2008-20Window Sweeper Kit. For models with special molding on the door, 2nd generation. 4-Piece Kit

1971 Chevrolet Camaro Window Sweeper Kit-WC 2008-21 1971 Chevrolet Camaro Window Sweeper Kit-WC 2008-21Window Sweeper Kit. For models without special molding, 2nd generation. 4-Piece Kit

1971 Chevrolet Camaro Quarter Window Reveal Molding Clip.  Made of Steel-WF 205 1971 Chevrolet Camaro Quarter Window Reveal Molding Clip. Made of Steel-WF 205Quarter Window Reveal Molding Clip. Made of Steel. 1-3/8" X 11/16". Each

1971 Chevrolet Camaro Rear Windshield Reveal Molding Clip.  Made of steel-WF 211 1971 Chevrolet Camaro Rear Windshield Reveal Molding Clip. Made of steel-WF 211Rear Windshield Reveal Molding Clip. Made of steel. 15/16" X 3/4". Each

1971 Chevrolet Camaro Windshield Reveal Molding Clip.  Made of steel-WF 223 1971 Chevrolet Camaro Windshield Reveal Molding Clip. Made of steel-WF 223Windshield Reveal Molding Clip. Made of steel. 1/1/8" X 3/4". Each

Why Choose Metro?

For over 100 years, Metro Moulded Parts has been the pinnacle of quality in classic car restoration parts. Our commitment to precision and authenticity in every component ensures a perfect fit and an OEM-level appearance.

  • Expert Craftsmanship & Quality: Each part is a testament to our dedication to reliability and perfection, crafted from original designs and thoroughly tested.
  • Advanced Technology: We use cutting-edge techniques to create flawless, long-lasting parts that surpass others in performance.
  • SuperSoft Sponge – The Ultimate Door Seal: Not only are our door seals 30% softer than competitors', but they're also guaranteed to never leak. They effectively reduce wind and road noise, enhancing your classic car's comfort and driving experience.
  • Proudly American: Our parts are a product of American craftsmanship, made in the USA with a spirit of excellence and heritage.
  • Unrivaled Warranty: We back our products with a 30-year industry-leading warranty, a testament to our confidence in their quality.

Join us in preserving the legacy of classic cars with parts that are crafted for perfection, not just made.

Need expert help? We're available at1-800-878-2237 - Email us atmetrosales@metrommp.com orlive help