Buy
Resources
Entertainment
Magazine
Community
In This Article
Category:
Muscle Cars
While AMXs almost always steal the lion's share of attention away from Javelins, this particular 1973 AMC Javelin for sale on Hemmings.com has a few things going for it, among them the Z-code 401 and the Pierre Cardin interior, not to mention the excellent shape it's still in. It's not original, and it probably won't win as many awards as an AMX would, but there are still plenty of people who wouldn't turn their noses up at it. From the seller's description:
I am very proud of this car, and have taken great care of it. Only 4152 Cardin Javelins were produced, and this is one of the only ones left. My family had three Javelins, a '68, a '73 and a '74, throughout the 1970's and early 1980's, so when I found this one in 2006 I was thrilled. But I don't have the time to enjoy it these days, so it's time for someone else to enjoy it.Here are the details: * VIN: A3C797Z270472 * Factory Z Code * Two-door hardtop, Snow White with black accents, 401 cu.in. AMC V-8 rebuilt in '09 * Working AM/FM radio * front disk & rear drum brakes * front & rear AMC stock suspension * Magnum 500 optional wheels, BFG Radial T-A tires * OPTIONS: power steering & brakes, working a/c, tilt steering, tinted glass, rear de-fogger, Tic-Toc-Tach, positraction rear axle * original panels, excellent paint, tires, and body - no corrosion in frame & suspension (confirmed by Tomlin Auto Service in Oshawa, ON) * original A-1 Snow White paint stripped & re-painted by previous owner * New Mexico car, stored winters * smoke-free environment * original owner's manual & service records included * light rust on inside of trunk lid & small area of engine compartment; one dime-sized hole in rear bumper; 2 minor paint chips on right front quarter
1973 AMC Javelin
See more AMCs for sale on Hemmings.com.
Recent
Earth shaking. Ground pounding. Those are a couple of choice adjectives that describe Steve Kaiser’s 1970 'Cuda as it crackled by us during Hemmings Musclepalooza at Maple Grove Raceway on the way to the staging lanes. Kaiser then took it up a notch by doing a rowdy burnout and hanging the hoops on an 8.80 pass at 151 mph. After our ears stopped ringing, we tracked him down to get the details.
If you noticed the name Kaiser in gold leaf on the door, you might be wondering who that is. Steve Kaiser’s uncle Bob Kaiser started the Twin Hills Oldsmobile dealership in 1977 in Muncy, Pennsylvania, right around the time Olds was getting into drag racing with the glorious G-body Oldsmobile Cutlass. To promote the sport, Oldsmobile gave Uncle Kaiser five Cutlasses to race in the Stock and Super Stock classes. As a young man, Steve Kaiser would vacation at drag strips and attend drag racing events with the family until the age of 16 when he pursued other interests.
During that time, Steve’s father also got into the automotive business and helped create the Kaiser Brothers dealership that expanded into a Chrysler/Dodge/Jeep/Ram dealership with a larger facility, also in Muncy.
In 2008, Steve got back into cars. He began by installing superchargers on late-model Challengers and Chargers under a license by Mr. Norm out of the Kaiser Brothers dealership. By 2011, he had started looking for a race car. He soon found a 1970 Plymouth ‘Cuda that was well known around the Kentucky area and raced by its second owner, Johnny Dotson, a Dodge dealer from Paris, Kentucky. The ‘Cuda was painted in the classic black-and-white Direct Connection colors with a 513-inch 440 under the hood, a 727 transmission, and Dana 60 rear. That combo ran 10.80s in Super Pro and had been a track car since 1978.
Steve bought the car and immediately pulled the drivetrain and sent the car out to get painted to match his uncle’s racing livery. He started running 10.80s-90s in the Pro series with a steep learning curve. “I saw red (lights) a lot,” Steve says, “it was frustrating.” To make matters worse, he broke the block and had to rebuild the engine using a Mopar Performance block and a new rotator. The combo was mostly the same with a 0.60-over block, Indy heads and intake, and a 1050 Dominator.
The second year looked a little bit better, and he started winning rounds, but not races. “I got to the finals, but didn’t win,” Steve says. “I bought back in a lot, I can tell you that, I’m not a professional.” Regardless, Steve had fun racing a serious ‘Cuda for five years. As he got more experienced, he wanted to go faster.
By 2021 he had pulled the 440 and had Brian Tilburg build a 572-inch Hemi to go in its place. The Hemi had Stage V heads and a Keith Black block, a pair of Holley 950s, and an MSD Grid system that uses a crank trigger. The new engine made 1,017 hp on 114-octane VP and the car immediately went from running 10.80s to 9.60s in the quarter mile.
Today, Steve races the ‘Cuda in Nostalgia Super Stock and Hemi Super Stock races near his home in Muncy, Pennsylvania. We found him racing at Hemmings Musclepalooza in Maple Grove.
Keep reading...Show Less
What if I told you that not all muscle cars are from Detroit? No, I’m not talking about any of the rebellious machines from Kenosha. I’m talking about Newport Pagnell. Where exactly is Newport Pagnell you ask? It’s about 50 miles northwest of London, and the traditional home of Aston Martin, where thousands of its cars were built between the mid-1950s through 2007. Let’s take a look at this 1978 Aston Martin V8 Series 3 currently offered on Hemmings Auctions as a prime example of a non-Detroit muscle car.
How does the AMV8 stack up as a muscle car? Let’s count the ways: It’s got a booming, high-performance V8 under the hood that sends power to the rear wheels—and the rear wheels only. It’s a two-door coupe with a long hood and a fastback roof. It has a big hood scoop needed to clear a quartet of Weber two-barrel carburetors. It even has a Chrysler TorqueFlite automatic transmission for that authentic Yankee feel.
Rather than a lightweight sports car, the Aston Martin V8 is better considered a GT car, which seems to have a lot in common with American muscle cars. Even with aluminum body panels, the rather substantial Aston had a curb weight just a hair over 4,000 pounds, making it several hundred pounds heavier than a 1969 Dodge Charger R/T. It’s worth noting that despite being measurably smaller than the Charger, both cars share very similar proportions, with their long hoods, fastback rooflines, and short rear decks. An even closer comparison comes in the form of a ‘67 Ford Mustang, again with similar proportions but also the Aston having a wheelbase and overall length, width, and height very close to the American pony car.
The 1978 Aston Martin V8 is frequently referred to as a Series 3 since it was derived from the DBS, a model that launched in 1967 with an inline-six engine that was followed by the DBS V8, with a fuel-injected V8 engine. Both versions of the DBS were sold alongside each other into 1972, when, during the model year, the simply named V8 model supplanted both. With an updated front end that included a grille shape more reminiscent of Aston Martins past and a pair of headlamps rather than four, these interims V8s were considered Series 2 cars.
In 1973, Aston Martin dumped what had turned out to be a problematic mechanical fuel-injection system, instead opting for four Weber carburetors for its 5.3-liter V8. Multiple carburetion gives it good company with the likes of a Mopar 440 Six-Pack or Pontiac Tri-Power. That carburetor setup required additional hood clearance that resulted in the large scoop worn by such cars, though it was non-functional in terms of letting in any additional air to the intake.
The rest of the engine department takes a big departure from the standard American iron-block, overhead-valve setup. Aston Martin’s V8 featured all-aluminum construction and dual overhead camshafts on each cylinder head, driven by dual chains. Yes, it had hemispherical combustion chambers, even with just two valves per cylinder. Engineers specced a forged crankshaft and forged chrome-moly connecting rods.
Output for 1978 was estimated at 310 horsepower and 320 lb-ft of torque—pretty substantial numbers for a car built during the oil crisis era and before engineers had leveraged electronic fuel injection to win the battle against emissions regulations. In accordance with its muscle car vibe, most AM V8s of the period were equipped with a TorqueFlite three-speed automatic, complete with Mopar factory ratios of 2.45:1, 1:45:1 and 1:1, along with a limited-slip rear differential. A 3.31 final-drive ratio was standard, with 3.54:1 optional. A five-speed manual was available.
Distinctions from Detroit grow once you step inside an Aston Martin V8, which was essentially a handmade car, with very low production numbers. Each of the four seats was covered in leather, a material that extended to the door trim, steering wheel, shift knob and even the center console surround. Carpets were wool. Given its high price and object of luxury aspirations, each car was also packed with plenty of sound insulation to isolate occupants from road noise. Power assistance for the brakes and steering was standard, as were air conditioning, power windows and power locks.
With a 0-60 mph time of “about six seconds,” according to Aston Martin literature of the time, along with a top speed over 150 mph, the AM V8 was in nearly a class by itself. Torque wasn't quite like that of an unrestrained big block American V8 from the peak muscle car era, but the Aston Martin’s V8 engine still delivered power with a swift rush towards a redline over 5,000 rpm, though no such actual red line is indicated on the tach. Suspension included unequal-length control arms up front with an anti-roll bar and De Dion rear axle with parallel trailing arms and watt linkage in the rear. Coil spring were at all four wheels, as were disc brakes, with the rear disc inboard. Not designed to tackle a tight road course, the AM V8 was still noted as a competent high-speed handler.
This 1978 Aston Martin V8 Series 3 features a silver metallic body with a red leather interior. The selling dealer indicates that it was purchased from the second owner who it is believed purchased it from the original owner as he aged out of driving in his 90s. The car appears to have been very well maintained, with the seller sharing that the engine, transmission, paint, body and interior are all “highly original.”
Other information to note on this AMV8 are a slew of services performed last fall, including a “full tune-up,” rebuilt carburetors, new spark plugs and filters, new battery and an alternator rebuild. Everything is asserted to be functioning properly with the car seemingly ready to drive anywhere.
As one of less than 1,000 Series 3 examples made, this 1978 Aston Martin V8 coupe offers a uniquely British take on big V8 performance in a midsize car—a muscle car, but with a different accent.
Head on over to Hemmings Auctions and take a closer look for yourself.
Keep reading...Show Less