Turbocharged 1976 Ford Pinto for sale on Hemmings.com. From the seller's description:
While it looks like a typical Malaise Era subcompact on the outside, this wee Ford has a secret under the hood. Yes, that's right, under the hood is a modified turbocharged 2.3L inline four-cylinder engine transplanted from a 1988 Ford Thunderbird Turbo Coupe. Backing up that boosted motor is the turbo coupe's five-speed manual transmission and an eight-inch rear differential. This Pinto is very fast and just too much fun, something that Ford should have done from the factory!Amuse your friends with the power this small, light car generates and surprise fellow drivers who think you'll be the last one away from a stop. Ford enthusiasts will find this Pinto the ultimate sleeper car that still even sports it's unassuming 13″ stock wheels!
Made in February 1976, at Ford's San Jose, California assembly plant, this car was shipped to the Los Angeles area. This car's mostly original Medium Chestnut Metallic paint is in good condition with some minor blemishes while the trim is in fair shape. The glass sections are in good shape and crack-free, as are the lights, which are intact and clear. All of the body panels are in good shape, including the Mach One hood scoop, and the cargo area in very good order. The engine bay is reasonably tidy and the battery is in very good shape. The bumpers are decent condition. Car rolls on 155/80R13 radial tires with 13-inch wheels with factory wheel covers.
Inside, the tan recovered seats are in good shape while the matching carpet is in fair condition. The headliner needs some attention, however. The instrument panel is in very good condition with Auto Meter and Stewart Warner gauges to monitor the actions of the turbocharged engine, while the three-spoke aftermarket steering wheel, door panels, mirrors, center console and shift lever are all in good shape. Rounding out the interior is a factory AM/FM stereo.
Documentation includes original owner's manual. Current mileage on the odometer shows 109,414 miles.
1976 Ford Pinto
See more Fords for sale on Hemmings.com.
Recent
Rather than a lightweight sports car, the Aston Martin V8 is better considered a GT car, which seems to have a lot in common with American muscle cars. Even with aluminum body panels, the rather substantial Aston had a curb weight just a hair over 4,000 pounds, making it several hundred pounds heavier than a 1969 Dodge Charger R/T. It’s worth noting that despite being measurably smaller than the Charger, both cars share very similar proportions, with their long hoods, fastback rooflines, and short rear decks. An even closer comparison comes in the form of a ‘67 Ford Mustang, again with similar proportions but also the Aston having a wheelbase and overall length, width, and height very close to the American pony car.
The 1978 Aston Martin V8 is frequently referred to as a Series 3 since it was derived from the DBS, a model that launched in 1967 with an inline-six engine that was followed by the DBS V8, with a fuel-injected V8 engine. Both versions of the DBS were sold alongside each other into 1972, when, during the model year, the simply named V8 model supplanted both. With an updated front end that included a grille shape more reminiscent of Aston Martins past and a pair of headlamps rather than four, these interims V8s were considered Series 2 cars.
In 1973, Aston Martin dumped what had turned out to be a problematic mechanical fuel-injection system, instead opting for four Weber carburetors for its 5.3-liter V8. Multiple carburetion gives it good company with the likes of a Mopar 440 Six-Pack or Pontiac Tri-Power. That carburetor setup required additional hood clearance that resulted in the large scoop worn by such cars, though it was non-functional in terms of letting in any additional air to the intake.
The rest of the engine department takes a big departure from the standard American iron-block, overhead-valve setup. Aston Martin’s V8 featured all-aluminum construction and dual overhead camshafts on each cylinder head, driven by dual chains. Yes, it had hemispherical combustion chambers, even with just two valves per cylinder. Engineers specced a forged crankshaft and forged chrome-moly connecting rods.
Output for 1978 was estimated at 310 horsepower and 320 lb-ft of torque—pretty substantial numbers for a car built during the oil crisis era and before engineers had leveraged electronic fuel injection to win the battle against emissions regulations. In accordance with its muscle car vibe, most AM V8s of the period were equipped with a TorqueFlite three-speed automatic, complete with Mopar factory ratios of 2.45:1, 1:45:1 and 1:1, along with a limited-slip rear differential. A 3.31 final-drive ratio was standard, with 3.54:1 optional. A five-speed manual was available.
Distinctions from Detroit grow once you step inside an Aston Martin V8, which was essentially a handmade car, with very low production numbers. Each of the four seats was covered in leather, a material that extended to the door trim, steering wheel, shift knob and even the center console surround. Carpets were wool. Given its high price and object of luxury aspirations, each car was also packed with plenty of sound insulation to isolate occupants from road noise. Power assistance for the brakes and steering was standard, as were air conditioning, power windows and power locks.
With a 0-60 mph time of “about six seconds,” according to Aston Martin literature of the time, along with a top speed over 150 mph, the AM V8 was in nearly a class by itself. Torque wasn't quite like that of an unrestrained big block American V8 from the peak muscle car era, but the Aston Martin’s V8 engine still delivered power with a swift rush towards a redline over 5,000 rpm, though no such actual red line is indicated on the tach. Suspension included unequal-length control arms up front with an anti-roll bar and De Dion rear axle with parallel trailing arms and watt linkage in the rear. Coil spring were at all four wheels, as were disc brakes, with the rear disc inboard. Not designed to tackle a tight road course, the AM V8 was still noted as a competent high-speed handler.
This 1978 Aston Martin V8 Series 3 features a silver metallic body with a red leather interior. The selling dealer indicates that it was purchased from the second owner who it is believed purchased it from the original owner as he aged out of driving in his 90s. The car appears to have been very well maintained, with the seller sharing that the engine, transmission, paint, body and interior are all “highly original.”
Other information to note on this AMV8 are a slew of services performed last fall, including a “full tune-up,” rebuilt carburetors, new spark plugs and filters, new battery and an alternator rebuild. Everything is asserted to be functioning properly with the car seemingly ready to drive anywhere.
As one of less than 1,000 Series 3 examples made, this 1978 Aston Martin V8 coupe offers a uniquely British take on big V8 performance in a midsize car—a muscle car, but with a different accent.
Head on over to Hemmings Auctions and take a closer look for yourself.
Photography by Mark J. McCourt
Do You Like Sunshine And SPF?
Photography by Mark J. McCourt
Or Shelby V-8 Muscle?
Photography by Mark J. McCourt
If you missed these pickups in Rhinebeck and have a soft spot for collectible modern-classic Dodge trucks, you can search the Hemmings Marketplace and find the right Dakota for you.
Trending
╳