This kit is designed to easily take the 3.7L VHR to the next level. It provides the option to leave the stock catalytic converters in place to eliminate exhaust smell and have a quiet operation (well…the turbo spool will be very apparent).

With stock exhaust and stock cats this kit made a very respectable 425awhp/358awtq on just 7.5psi. Will make 500+whp when turning up the boost.

By eliminating the cats and turning up the boost up further this kit will easily make over 600whp.

The kit will also come with a FREE aftermarket bash bar with a tow hook interface. ($450 value)

This kit could be installed in as little as 5 hours in a home garage. The turbocharger that was selected is an air cooled, triplex ceramic ball bearing with billet wheel Comp 6565. Meaning no oil feed lines, return lines, scavenge pump, wiring kits, oil pan spacers or pickup, or coolant lines are required for this kit. You simply just replace the factory muffler for a turbo and run some piping to the intercooler.

And the best part...$5199 for a tuner kit!!! We can add a fuel setup good for 550+whp for a total of $5999! Just need Ecutek and a tune which we also sell.

We do not suggest adding this kit to any car which is lowered or has a lower than stock ride height.

Whats included in the $5199 tuner kit? Everything you need except fuel and tuning.

• -Comp oiless 6865 triplex ceramic ball bearing turbo with billet wheel. No lines to run, no pump, no electrical, no oil pan spacer or pickup needed. Just bolt it on and your done.

• Topgun Speedworks Vibrant core Intercooler

• Aftermarket bash bar with tow hook

• spacer or pickup needed. Just bolt it on and your done.

• 44mm VS racing wastegate with several psi boost springs or upgrade to precision turbo wastegate

• 50mm VS racing bov or upgrade to precision turbo bov

• 3" single turbo back exhaust with open dump or upgrade to dual exhaust with muffled dump.

• all stainless steel hot side and aluminum cold side piping.

• Free aftermarket bash bar! These typically run $400-$500 alone.

• full cone filter with 4" inlet

• all necessary brackets, mounting hardware, clamps, etc.

We also offer a dual tip exit for the wastegate dump (pictured) ($150 upgrade)